From 2cbacafd7af0f1cc7a433668c662a91ba6aabc1b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Apr 2012 16:34:13 +0100 Subject: SERIAL: core: add hardware assisted s/w flow control support Ports which are capable of handling s/w flow control in hardware to know when the s/w flow control termios settings are changed. Add a flag to allow the low level serial drivers to indicate that they support this, and these changes should be propagated to them. Acked-by: Alan Cox Signed-off-by: Russell King --- include/linux/serial_core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 3c430228d232..00051388de3c 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -163,6 +163,8 @@ struct uart_port { #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) +/* Port has hardware-assisted s/w flow control */ +#define UPF_SOFT_FLOW ((__force upf_t) (1 << 22)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) -- cgit v1.2.3 From dba05832cbe4f305dfd998fb26d7c685d91fbbd8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Apr 2012 16:41:10 +0100 Subject: SERIAL: core: add hardware assisted h/w flow control support Ports which are handling h/w flow control in hardware must not have their RTS state altered depending on the tty's hardware-stopped state. Avoid this additional logic when setting the termios state. Acked-by: Alan Cox Signed-off-by: Russell King --- include/linux/serial_core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 00051388de3c..e2cda5d04e48 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -163,6 +163,8 @@ struct uart_port { #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) +/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */ +#define UPF_HARD_FLOW ((__force upf_t) (1 << 21)) /* Port has hardware-assisted s/w flow control */ #define UPF_SOFT_FLOW ((__force upf_t) (1 << 22)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) -- cgit v1.2.3 From 9aba8d5b011193c8e01d565c5b585df5b94f1db2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Apr 2012 17:23:14 +0100 Subject: SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control Add two callbacks for hardware assisted flow control; we need to know when the tty layers want us to stop and restart due to their buffer levels. Call a driver specific throttle/unthrottle function if and only if the driver indicates that it is using an enabled hardware assisted flow control method, otherwise fall back to the non-hardware assisted methods. Acked-by: Alan Cox Signed-off-by: Russell King --- include/linux/serial_core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index e2cda5d04e48..c6690a2a27fb 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -46,6 +46,8 @@ struct uart_ops { unsigned int (*get_mctrl)(struct uart_port *); void (*stop_tx)(struct uart_port *); void (*start_tx)(struct uart_port *); + void (*throttle)(struct uart_port *); + void (*unthrottle)(struct uart_port *); void (*send_xchar)(struct uart_port *, char ch); void (*stop_rx)(struct uart_port *); void (*enable_ms)(struct uart_port *); -- cgit v1.2.3