From a9bce1b03c2199e66d36cda8aac675338bc074a7 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 5 Jun 2013 16:13:47 +0200 Subject: mfd: input: iio: ti_am335x_adc: use one structure for ti_tscadc_dev The mfd driver creates platform data for the child devices and it is the ti_tscadc_dev struct. This struct is copied for the two devices. The copy of the structure makes a common lock in this structure a little less usefull. Therefore the platform data is not a pointer to the structure and the same structure is used. While doing the change I noticed that the suspend/resume code assumes the wrong pointer for ti_tscadc_dev and this has been fixed as well. Signed-off-by: Sebastian Andrzej Siewior --- include/linux/mfd/ti_am335x_tscadc.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index c79ad5d2f271..8114e4e8b91b 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -149,4 +149,11 @@ struct ti_tscadc_dev { struct adc_device *adc; }; +static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p) +{ + struct ti_tscadc_dev **tscadc_dev = p->dev.platform_data; + + return *tscadc_dev; +} + #endif -- cgit v1.2.3 From abeccee40320245a2a6a006dc8466a703cbd1d5e Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Thu, 24 Jan 2013 03:45:05 +0000 Subject: input: ti_am33x_tsc: Step enable bits made configurable Current code has hard coded value written to step enable bits. Now the bits are updated based on how many steps are needed to be configured got from platform data. The user needs to take care not to exceed the count more than 16. While using ADC and TSC one should take care to set this parameter correctly. Sebastian added the common lock and moved the code, that manipulates the steps, from into the mfd module. Signed-off-by: Patil, Rachna Signed-off-by: Felipe Balbi Signed-off-by: Sebastian Andrzej Siewior --- include/linux/mfd/ti_am335x_tscadc.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 8114e4e8b91b..4258627d076a 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -46,8 +46,6 @@ /* Step Enable */ #define STEPENB_MASK (0x1FFFF << 0) #define STEPENB(val) ((val) << 0) -#define STPENB_STEPENB STEPENB(0x1FFFF) -#define STPENB_STEPENB_TC STEPENB(0x1FFF) /* IRQ enable */ #define IRQENB_HW_PEN BIT(0) @@ -141,6 +139,8 @@ struct ti_tscadc_dev { void __iomem *tscadc_base; int irq; struct mfd_cell cells[TSCADC_CELLS]; + u32 reg_se_cache; + spinlock_t reg_lock; /* tsc device */ struct titsc *tsc; @@ -156,4 +156,8 @@ static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p) return *tscadc_dev; } +void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc); +void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val); +void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val); + #endif -- cgit v1.2.3 From bb76dc09ddfc135c6c5e8eb7d3c583bfa8bdd439 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Thu, 24 Jan 2013 03:45:06 +0000 Subject: input: ti_am33x_tsc: Order of TSC wires, made configurable The current driver expected touchscreen input wires(XP,XN,YP,YN) to be connected in a particular order. Making changes to accept this as platform data. Sebastian reworked the original patch and removed a lot of the not required pieces. Signed-off-by: Patil, Rachna Signed-off-by: Felipe Balbi Signed-off-by: Sebastian Andrzej Siewior --- include/linux/input/ti_am335x_tsc.h | 12 ++++++++++++ include/linux/mfd/ti_am335x_tscadc.h | 3 --- 2 files changed, 12 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h index 49269a2aa329..6a66b4d1ac2c 100644 --- a/include/linux/input/ti_am335x_tsc.h +++ b/include/linux/input/ti_am335x_tsc.h @@ -12,12 +12,24 @@ * A step configured to read a single * co-ordinate value, can be applied * more number of times for better results. + * @wire_config: Different EVM's could have a different order + * for connecting wires on touchscreen. + * We need to provide an 8 bit number where in + * the 1st four bits represent the analog lines + * and the next 4 bits represent positive/ + * negative terminal on that input line. + * Notations to represent the input lines and + * terminals resoectively is as follows: + * AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + * XP = 0, XN = 1, YP = 2, YN = 3. + * */ struct tsc_data { int wires; int x_plate_resistance; int steps_to_configure; + int wire_config[10]; }; #endif diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 4258627d076a..e36ae4184917 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -71,8 +71,6 @@ #define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) #define STEPCONFIG_INP_MASK (0xF << 19) #define STEPCONFIG_INP(val) ((val) << 19) -#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) -#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) #define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) #define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) #define STEPCONFIG_FIFO1 BIT(26) @@ -94,7 +92,6 @@ #define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) #define STEPCHARGE_INP_MASK (0xF << 19) #define STEPCHARGE_INP(val) ((val) << 19) -#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) #define STEPCHARGE_RFM_MASK (3 << 23) #define STEPCHARGE_RFM(val) ((val) << 23) #define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) -- cgit v1.2.3 From 24d5c82f8227d4dedf177df3f062eb35db15aaf6 Mon Sep 17 00:00:00 2001 From: Pantelis Antoniou Date: Sat, 13 Oct 2012 16:37:24 +0300 Subject: mfd: ti_tscadc: deal with partial activation Fix the mfd device in the case where a subdevice might not be activated. Signed-off-by: Pantelis Antoniou Signed-off-by: Felipe Balbi Signed-off-by: Sebastian Andrzej Siewior --- include/linux/mfd/ti_am335x_tscadc.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index e36ae4184917..fe54ba4a3b2f 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -120,11 +120,6 @@ #define TSCADC_CELLS 2 -enum tscadc_cells { - TSC_CELL, - ADC_CELL, -}; - struct mfd_tscadc_board { struct tsc_data *tsc_init; struct adc_data *adc_init; @@ -135,6 +130,9 @@ struct ti_tscadc_dev { struct regmap *regmap_tscadc; void __iomem *tscadc_base; int irq; + int used_cells; /* 1-2 */ + int tsc_cell; /* -1 if not used */ + int adc_cell; /* -1 if not used */ struct mfd_cell cells[TSCADC_CELLS]; u32 reg_se_cache; spinlock_t reg_lock; -- cgit v1.2.3 From a3e509bb328287beba05017037e505bc53b62724 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 21 May 2013 18:49:58 +0200 Subject: input: mfd: ti_am335x_tsc remove remaining platform data pieces The two header files removed here are unused and have no users as this platform was never used with platform devices. Signed-off-by: Sebastian Andrzej Siewior --- include/linux/input/ti_am335x_tsc.h | 35 ----------------------------- include/linux/mfd/ti_am335x_tscadc.h | 5 ----- include/linux/platform_data/ti_am335x_adc.h | 14 ------------ 3 files changed, 54 deletions(-) delete mode 100644 include/linux/input/ti_am335x_tsc.h delete mode 100644 include/linux/platform_data/ti_am335x_adc.h (limited to 'include/linux') diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h deleted file mode 100644 index 6a66b4d1ac2c..000000000000 --- a/include/linux/input/ti_am335x_tsc.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __LINUX_TI_AM335X_TSC_H -#define __LINUX_TI_AM335X_TSC_H - -/** - * struct tsc_data Touchscreen wire configuration - * @wires: Wires refer to application modes - * i.e. 4/5/8 wire touchscreen support - * on the platform. - * @x_plate_resistance: X plate resistance. - * @steps_to_configure: The sequencer supports a total of - * 16 programmable steps. - * A step configured to read a single - * co-ordinate value, can be applied - * more number of times for better results. - * @wire_config: Different EVM's could have a different order - * for connecting wires on touchscreen. - * We need to provide an 8 bit number where in - * the 1st four bits represent the analog lines - * and the next 4 bits represent positive/ - * negative terminal on that input line. - * Notations to represent the input lines and - * terminals resoectively is as follows: - * AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. - * XP = 0, XN = 1, YP = 2, YN = 3. - * - */ - -struct tsc_data { - int wires; - int x_plate_resistance; - int steps_to_configure; - int wire_config[10]; -}; - -#endif diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index fe54ba4a3b2f..533f200e6d0e 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -120,11 +120,6 @@ #define TSCADC_CELLS 2 -struct mfd_tscadc_board { - struct tsc_data *tsc_init; - struct adc_data *adc_init; -}; - struct ti_tscadc_dev { struct device *dev; struct regmap *regmap_tscadc; diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h deleted file mode 100644 index e41d5834cb84..000000000000 --- a/include/linux/platform_data/ti_am335x_adc.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __LINUX_TI_AM335X_ADC_H -#define __LINUX_TI_AM335X_ADC_H - -/** - * struct adc_data ADC Input information - * @adc_channels: Number of analog inputs - * available for ADC. - */ - -struct adc_data { - unsigned int adc_channels; -}; - -#endif -- cgit v1.2.3 From 8c896308feae7fb2e8da4ae4c09fe2d2ca18ad7b Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 29 May 2013 14:46:21 +0200 Subject: input: ti_am335x_adc: use only FIFO0 and clean up a little The driver programs a threshold of "coordinate_readouts" say 5. The REG_FIFO0THR registers says it should it be programmed to "threshold minus one". The driver does not expect just 5 coordinates but 5 * 2 + 2. Multiplied by two because 5 for X and 5 for Y and plus 2 because we have two Z. The whole thing kind of works because It reads the 5 coordinates for X and Y from FIFO0 and FIFO1 and the last element in each FIFO is ignored within the loop and read later. Nothing guaranties that FIFO1 is ready by the time it is read. In fact I could see that that FIFO1 reaturns for Y channels 8,9, 10, 12, 6 and for Y channel 7 for Z. The problem is that channel 7 and channel 12 got somehow mixed up. The other Problem is that FIFO1 is also used by the IIO part leading to wrong results if both (tsc & adc) are used. The patch tries to clean up the whole thing a little: - Remove the +1 and -1 in REG_STEPCONFIG, REG_STEPDELAY and its counter part in the for loop. This is just confusing. - Use only FIFO0 in TSC. The fifo has space for 64 entries so should be fine. - Read the whole FIFO in one function and check the channel. - in case we dawdle around, make sure we only read a multiple of our coordinate set. On the second interrupt we will cleanup the remaining enties. Acked-by: Dmitry Torokhov Signed-off-by: Sebastian Andrzej Siewior --- include/linux/mfd/ti_am335x_tscadc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 533f200e6d0e..8d73fe29796a 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -30,8 +30,8 @@ #define REG_IDLECONFIG 0x058 #define REG_CHARGECONFIG 0x05C #define REG_CHARGEDELAY 0x060 -#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) -#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_STEPCONFIG(n) (0x64 + ((n) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n) * 8)) #define REG_FIFO0CNT 0xE4 #define REG_FIFO0THR 0xE8 #define REG_FIFO1CNT 0xF0 -- cgit v1.2.3