From d6e640f9766e2fb9aa3853b4ff19e4d7d5d7e373 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 8 May 2012 22:20:33 +0200 Subject: can: update documentation wording error frames -> error messages As Heinz-Juergen Oertel pointed out 'CAN error frames' are a already defined term for the CAN protocol violation indication on the wire. To avoid confusion with the error messages created by CAN drivers available via CAN RAW sockets update the documentation and change the naming from 'error frames' to 'error messages' or 'error message frames'. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can.h | 8 ++++---- include/linux/can/error.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/can.h b/include/linux/can.h index 9a19bcb3eeaf..17334c09bd93 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -21,7 +21,7 @@ /* special address description flags for the CAN_ID */ #define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */ #define CAN_RTR_FLAG 0x40000000U /* remote transmission request */ -#define CAN_ERR_FLAG 0x20000000U /* error frame */ +#define CAN_ERR_FLAG 0x20000000U /* error message frame */ /* valid bits in CAN ID for frame formats */ #define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */ @@ -32,14 +32,14 @@ * Controller Area Network Identifier structure * * bit 0-28 : CAN identifier (11/29 bit) - * bit 29 : error frame flag (0 = data frame, 1 = error frame) + * bit 29 : error message frame flag (0 = data frame, 1 = error message) * bit 30 : remote transmission request flag (1 = rtr frame) * bit 31 : frame format flag (0 = standard 11 bit, 1 = extended 29 bit) */ typedef __u32 canid_t; /* - * Controller Area Network Error Frame Mask structure + * Controller Area Network Error Message Frame Mask structure * * bit 0-28 : error class mask (see include/linux/can/error.h) * bit 29-31 : set to zero @@ -97,7 +97,7 @@ struct sockaddr_can { * & mask == can_id & mask * * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can - * filter for error frames (CAN_ERR_FLAG bit set in mask). + * filter for error message frames (CAN_ERR_FLAG bit set in mask). */ struct can_filter { canid_t can_id; diff --git a/include/linux/can/error.h b/include/linux/can/error.h index 63e855ea6b84..7b7148bded71 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -1,7 +1,7 @@ /* * linux/can/error.h * - * Definitions of the CAN error frame to be filtered and passed to the user. + * Definitions of the CAN error messages to be filtered and passed to the user. * * Author: Oliver Hartkopp * Copyright (c) 2002-2007 Volkswagen Group Electronic Research @@ -12,7 +12,7 @@ #ifndef CAN_ERROR_H #define CAN_ERROR_H -#define CAN_ERR_DLC 8 /* dlc for error frames */ +#define CAN_ERR_DLC 8 /* dlc for error message frames */ /* error class (mask) in can_id */ #define CAN_ERR_TX_TIMEOUT 0x00000001U /* TX timeout (by netdevice driver) */ -- cgit v1.2.3 From a60977a51333a8108f0574aa26094d66b7fedf34 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 14:59:26 +0900 Subject: sh: clkfwk: Move to common clk_div_table accessors for div4/div6. This plugs in a generic clk_div_table, based on the div4 version. div6 is then adopted to use it for encapsulating its div table, which permits us to start div6/4 unification, as well as preparation for other div types. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index c513b73cd7cb..706b803df7b7 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -18,7 +18,6 @@ struct clk_mapping { struct kref ref; }; - struct sh_clk_ops { #ifdef CONFIG_SH_CLK_CPG_LEGACY void (*init)(struct clk *clk); @@ -149,11 +148,13 @@ static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr) .flags = _flags, \ } -struct clk_div4_table { +struct clk_div_table { struct clk_div_mult_table *div_mult_table; void (*kick)(struct clk *clk); }; +#define clk_div4_table clk_div_table + int sh_clk_div4_register(struct clk *clks, int nr, struct clk_div4_table *table); int sh_clk_div4_enable_register(struct clk *clks, int nr, -- cgit v1.2.3 From 1111cc1e8080b5ff46f5b945acb2f99d6176b2d1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 15:21:43 +0900 Subject: sh: clkfwk: Introduce a div_mask for variable div types. This plugs in a div_mask for the clock and sets it up for the existing div6/4 cases. This will make it possible to support other div types, as well as share more div6/4 infrastructure. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 706b803df7b7..d540b8153178 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -30,6 +30,10 @@ struct sh_clk_ops { long (*round_rate)(struct clk *clk, unsigned long rate); }; +#define SH_CLK_DIV_MSK(div) ((1 << (div)) - 1) +#define SH_CLK_DIV4_MSK SH_CLK_DIV_MSK(4) +#define SH_CLK_DIV6_MSK SH_CLK_DIV_MSK(6) + struct clk { struct list_head node; struct clk *parent; @@ -51,6 +55,7 @@ struct clk { unsigned int enable_bit; void __iomem *mapped_reg; + unsigned int div_mask; unsigned long arch_flags; void *priv; struct clk_mapping *mapping; @@ -145,6 +150,7 @@ static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr) .enable_reg = (void __iomem *)_reg, \ .enable_bit = _shift, \ .arch_flags = _div_bitmap, \ + .div_mask = SH_CLK_DIV4_MSK, \ .flags = _flags, \ } @@ -167,6 +173,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .enable_reg = (void __iomem *)_reg, \ .flags = _flags, \ + .div_mask = SH_CLK_DIV6_MSK, \ .parent_table = _parents, \ .parent_num = _num_parents, \ .src_shift = _src_shift, \ @@ -177,6 +184,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .parent = _parent, \ .enable_reg = (void __iomem *)_reg, \ + .div_mask = SH_CLK_DIV6_MSK, \ .flags = _flags, \ } -- cgit v1.2.3 From 75f5f8a56e0fdf6d32b3ae9c44c10bc0acd3857c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 15:26:01 +0900 Subject: sh: clkfwk: Use shared sh_clk_div_recalc(). This generalizes the div4 recalc routine for use by div6 and others, then makes it the default. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index d540b8153178..35a04f19fb53 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -172,6 +172,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, _num_parents, _src_shift, _src_width) \ { \ .enable_reg = (void __iomem *)_reg, \ + .enable_bit = 0, /* unused */ \ .flags = _flags, \ .div_mask = SH_CLK_DIV6_MSK, \ .parent_table = _parents, \ @@ -184,6 +185,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .parent = _parent, \ .enable_reg = (void __iomem *)_reg, \ + .enable_bit = 0, /* unused */ \ .div_mask = SH_CLK_DIV6_MSK, \ .flags = _flags, \ } -- cgit v1.2.3 From 764f4e4e33d18cde4dcaf8a0d860b749c6d6d08b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 16:34:48 +0900 Subject: sh: clkfwk: Use shared sh_clk_div_enable/disable(). This introduces a new flag for clocks that need to have their divisor ratio set back to their initial mask at disable time to prevent interactivity problems with the clock stop bit (presently div6 only). With this in place it's possible to handle the corner case on top of the div4 op without any particular need for leaving things split out. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 35a04f19fb53..50910913b268 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -69,6 +69,8 @@ struct clk { #define CLK_ENABLE_REG_16BIT BIT(2) #define CLK_ENABLE_REG_8BIT BIT(3) +#define CLK_MASK_DIV_ON_DISABLE BIT(4) + #define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \ CLK_ENABLE_REG_16BIT | \ CLK_ENABLE_REG_8BIT) @@ -173,7 +175,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .enable_reg = (void __iomem *)_reg, \ .enable_bit = 0, /* unused */ \ - .flags = _flags, \ + .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ .div_mask = SH_CLK_DIV6_MSK, \ .parent_table = _parents, \ .parent_num = _num_parents, \ @@ -187,7 +189,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, .enable_reg = (void __iomem *)_reg, \ .enable_bit = 0, /* unused */ \ .div_mask = SH_CLK_DIV6_MSK, \ - .flags = _flags, \ + .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ } int sh_clk_div6_register(struct clk *clks, int nr); -- cgit v1.2.3 From 188726ecb66f022e92ec110ca85c62a937184636 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 24 May 2012 19:28:17 +0200 Subject: firewire: core: make address handler length 64 bits The type of the length field of the fw_address_handler structure was size_t, which restricted it to 32 bits on 32-bit architectures. While making it u32 would match the userspace API, all calculations on this field use 64 bits anyway, and the ability to use 4 GB or larger address ranges is useful in the kernel. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter --- include/linux/firewire.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 584826ba2eb7..d77f60c6d1ed 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -307,7 +307,7 @@ struct fw_transaction { struct fw_address_handler { u64 offset; - size_t length; + u64 length; fw_address_callback_t address_callback; void *callback_data; struct list_head link; -- cgit v1.2.3 From 32fad281c0680ed0ccade7dda85a2121cf9b1d06 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 4 May 2012 02:32:53 +0000 Subject: KVM: PPC: Book3S HV: Make the guest hash table size configurable This adds a new ioctl to enable userspace to control the size of the guest hashed page table (HPT) and to clear it out when resetting the guest. The KVM_PPC_ALLOCATE_HTAB ioctl is a VM ioctl and takes as its parameter a pointer to a u32 containing the desired order of the HPT (log base 2 of the size in bytes), which is updated on successful return to the actual order of the HPT which was allocated. There must be no vcpus running at the time of this ioctl. To enforce this, we now keep a count of the number of vcpus running in kvm->arch.vcpus_running. If the ioctl is called when a HPT has already been allocated, we don't reallocate the HPT but just clear it out. We first clear the kvm->arch.rma_setup_done flag, which has two effects: (a) since we hold the kvm->lock mutex, it will prevent any vcpus from starting to run until we're done, and (b) it means that the first vcpu to run after we're done will re-establish the VRMA if necessary. If userspace doesn't call this ioctl before running the first vcpu, the kernel will allocate a default-sized HPT at that point. We do it then rather than when creating the VM, as the code did previously, so that userspace has a chance to do the ioctl if it wants. When allocating the HPT, we can allocate either from the kernel page allocator, or from the preallocated pool. If userspace is asking for a different size from the preallocated HPTs, we first try to allocate using the kernel page allocator. Then we try to allocate from the preallocated pool, and then if that fails, we try allocating decreasing sizes from the kernel page allocator, down to the minimum size allowed (256kB). Note that the kernel page allocator limits allocations to 1 << CONFIG_FORCE_MAX_ZONEORDER pages, which by default corresponds to 16MB (on 64-bit powerpc, at least). Signed-off-by: Paul Mackerras [agraf: fix module compilation] Signed-off-by: Alexander Graf --- include/linux/kvm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 09f2b3aa2da7..2ce09aa7d3b3 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -617,6 +617,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_SIGNAL_MSI 77 #define KVM_CAP_PPC_GET_SMMU_INFO 78 #define KVM_CAP_S390_COW 79 +#define KVM_CAP_PPC_ALLOC_HTAB 80 #ifdef KVM_CAP_IRQ_ROUTING @@ -828,6 +829,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) /* Available with KVM_CAP_PPC_GET_SMMU_INFO */ #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) +/* Available with KVM_CAP_PPC_ALLOC_HTAB */ +#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) /* * ioctls for vcpu fds -- cgit v1.2.3 From b86aeafc766b71f6d55e54ed2c77fdf7f56ec1ba Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 25 Apr 2012 16:06:20 +0530 Subject: ARM: OMAP2+: SmartReflex: move the smartreflex header to include/linux/power Move the smartreflex header file (arch/arm/mach-omap2/smartreflex.h) in a new header file include/linux/power/smartreflex.h. This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 257 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100644 include/linux/power/smartreflex.h (limited to 'include/linux') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h new file mode 100644 index 000000000000..69eb270c6297 --- /dev/null +++ b/include/linux/power/smartreflex.h @@ -0,0 +1,257 @@ +/* + * OMAP Smartreflex Defines and Routines + * + * Author: Thara Gopinath + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Thara Gopinath + * + * Copyright (C) 2008 Nokia Corporation + * Kalle Jokiniemi + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __POWER_SMARTREFLEX_H +#define __POWER_SMARTREFLEX_H + +#include +#include + +#include + +/* + * Different Smartreflex IPs version. The v1 is the 65nm version used in + * OMAP3430. The v2 is the update for the 45nm version of the IP + * used in OMAP3630 and OMAP4430 + */ +#define SR_TYPE_V1 1 +#define SR_TYPE_V2 2 + +/* SMART REFLEX REG ADDRESS OFFSET */ +#define SRCONFIG 0x00 +#define SRSTATUS 0x04 +#define SENVAL 0x08 +#define SENMIN 0x0C +#define SENMAX 0x10 +#define SENAVG 0x14 +#define AVGWEIGHT 0x18 +#define NVALUERECIPROCAL 0x1c +#define SENERROR_V1 0x20 +#define ERRCONFIG_V1 0x24 +#define IRQ_EOI 0x20 +#define IRQSTATUS_RAW 0x24 +#define IRQSTATUS 0x28 +#define IRQENABLE_SET 0x2C +#define IRQENABLE_CLR 0x30 +#define SENERROR_V2 0x34 +#define ERRCONFIG_V2 0x38 + +/* Bit/Shift Positions */ + +/* SRCONFIG */ +#define SRCONFIG_ACCUMDATA_SHIFT 22 +#define SRCONFIG_SRCLKLENGTH_SHIFT 12 +#define SRCONFIG_SENNENABLE_V1_SHIFT 5 +#define SRCONFIG_SENPENABLE_V1_SHIFT 3 +#define SRCONFIG_SENNENABLE_V2_SHIFT 1 +#define SRCONFIG_SENPENABLE_V2_SHIFT 0 +#define SRCONFIG_CLKCTRL_SHIFT 0 + +#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) + +#define SRCONFIG_SRENABLE BIT(11) +#define SRCONFIG_SENENABLE BIT(10) +#define SRCONFIG_ERRGEN_EN BIT(9) +#define SRCONFIG_MINMAXAVG_EN BIT(8) +#define SRCONFIG_DELAYCTRL BIT(2) + +/* AVGWEIGHT */ +#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 +#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 + +/* NVALUERECIPROCAL */ +#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 +#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 +#define NVALUERECIPROCAL_RNSENP_SHIFT 8 +#define NVALUERECIPROCAL_RNSENN_SHIFT 0 + +/* ERRCONFIG */ +#define ERRCONFIG_ERRWEIGHT_SHIFT 16 +#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 +#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 + +#define SR_ERRWEIGHT_MASK (0x07 << 16) +#define SR_ERRMAXLIMIT_MASK (0xff << 8) +#define SR_ERRMINLIMIT_MASK (0xff << 0) + +#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) +#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) +#define ERRCONFIG_MCUACCUMINTEN BIT(29) +#define ERRCONFIG_MCUACCUMINTST BIT(28) +#define ERRCONFIG_MCUVALIDINTEN BIT(27) +#define ERRCONFIG_MCUVALIDINTST BIT(26) +#define ERRCONFIG_MCUBOUNDINTEN BIT(25) +#define ERRCONFIG_MCUBOUNDINTST BIT(24) +#define ERRCONFIG_MCUDISACKINTEN BIT(23) +#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) +#define ERRCONFIG_MCUDISACKINTST BIT(22) +#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) + +#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ + ERRCONFIG_MCUACCUMINTST | \ + ERRCONFIG_MCUVALIDINTST | \ + ERRCONFIG_MCUBOUNDINTST | \ + ERRCONFIG_MCUDISACKINTST) +/* IRQSTATUS */ +#define IRQSTATUS_MCUACCUMINT BIT(3) +#define IRQSTATUS_MCVALIDINT BIT(2) +#define IRQSTATUS_MCBOUNDSINT BIT(1) +#define IRQSTATUS_MCUDISABLEACKINT BIT(0) + +/* IRQENABLE_SET and IRQENABLE_CLEAR */ +#define IRQENABLE_MCUACCUMINT BIT(3) +#define IRQENABLE_MCUVALIDINT BIT(2) +#define IRQENABLE_MCUBOUNDSINT BIT(1) +#define IRQENABLE_MCUDISABLEACKINT BIT(0) + +/* Common Bit values */ + +#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c +#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 +#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 +#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 +#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 + +/* + * 3430 specific values. Maybe these should be passed from board file or + * pmic structures. + */ +#define OMAP3430_SR_ACCUMDATA 0x1f4 + +#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 +#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 + +#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 +#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 + +#define OMAP3430_SR_ERRWEIGHT 0x04 +#define OMAP3430_SR_ERRMAXLIMIT 0x02 + +/** + * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass + * pmic specific info to smartreflex driver + * + * @sr_pmic_init: API to initialize smartreflex on the PMIC side. + */ +struct omap_sr_pmic_data { + void (*sr_pmic_init) (void); +}; + +/** + * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. + * + * @sensor_voltdm_name: Name of voltdomain of SR instance + */ +struct omap_smartreflex_dev_attr { + const char *sensor_voltdm_name; +}; + +#ifdef CONFIG_OMAP_SMARTREFLEX +/* + * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. + * The smartreflex class driver should pass the class type. + * Should be used to populate the class_type field of the + * omap_smartreflex_class_data structure. + */ +#define SR_CLASS1 0x1 +#define SR_CLASS2 0x2 +#define SR_CLASS3 0x3 + +/** + * struct omap_sr_class_data - Smartreflex class driver info + * + * @enable: API to enable a particular class smaartreflex. + * @disable: API to disable a particular class smartreflex. + * @configure: API to configure a particular class smartreflex. + * @notify: API to notify the class driver about an event in SR. + * Not needed for class3. + * @notify_flags: specify the events to be notified to the class driver + * @class_type: specify which smartreflex class. + * Can be used by the SR driver to take any class + * based decisions. + */ +struct omap_sr_class_data { + int (*enable)(struct voltagedomain *voltdm); + int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); + int (*configure)(struct voltagedomain *voltdm); + int (*notify)(struct voltagedomain *voltdm, u32 status); + u8 notify_flags; + u8 class_type; +}; + +/** + * struct omap_sr_nvalue_table - Smartreflex n-target value info + * + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + */ +struct omap_sr_nvalue_table { + u32 efuse_offs; + u32 nvalue; +}; + +/** + * struct omap_sr_data - Smartreflex platform data. + * + * @ip_type: Smartreflex IP type. + * @senp_mod: SENPENABLE value for the sr + * @senn_mod: SENNENABLE value for sr + * @nvalue_count: Number of distinct nvalues in the nvalue table + * @enable_on_init: whether this sr module needs to enabled at + * boot up or not. + * @nvalue_table: table containing the efuse offsets and nvalues + * corresponding to them. + * @voltdm: Pointer to the voltage domain associated with the SR + */ +struct omap_sr_data { + int ip_type; + u32 senp_mod; + u32 senn_mod; + int nvalue_count; + bool enable_on_init; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; +}; + +/* Smartreflex module enable/disable interface */ +void omap_sr_enable(struct voltagedomain *voltdm); +void omap_sr_disable(struct voltagedomain *voltdm); +void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); + +/* API to register the pmic specific data with the smartreflex driver. */ +void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); + +/* Smartreflex driver hooks to be called from Smartreflex class driver */ +int sr_enable(struct voltagedomain *voltdm, unsigned long volt); +void sr_disable(struct voltagedomain *voltdm); +int sr_configure_errgen(struct voltagedomain *voltdm); +int sr_disable_errgen(struct voltagedomain *voltdm); +int sr_configure_minmax(struct voltagedomain *voltdm); + +/* API to register the smartreflex class driver with the smartreflex driver */ +int sr_register_class(struct omap_sr_class_data *class_data); +#else +static inline void omap_sr_enable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable_reset_volt( + struct voltagedomain *voltdm) {} +static inline void omap_sr_register_pmic( + struct omap_sr_pmic_data *pmic_data) {} +#endif +#endif -- cgit v1.2.3 From 80821c9c90427dd0f9274a82f9d69e43300d10bb Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:22:12 +0530 Subject: ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr * Convert SmartReflex "class" functions to take a struct omap_sr *, rather than a struct voltagedomain *. SmartReflex code should be driver code and not tightly coupled to OMAP subarchitecture-specific structures. Based on Paul's original code for the SmartReflex driver conversion. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 69eb270c6297..4224698cf8bd 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -143,6 +143,29 @@ #define OMAP3430_SR_ERRWEIGHT 0x04 #define OMAP3430_SR_ERRMAXLIMIT 0x02 +struct omap_sr { + struct list_head node; + struct platform_device *pdev; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; + struct dentry *dbg_dir; + unsigned int irq; + int srid; + int ip_type; + int nvalue_count; + bool autocomp_active; + u32 clk_length; + u32 err_weight; + u32 err_minlimit; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; + u32 senp_mod; + u32 senn_mod; + void __iomem *base; +}; + /** * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass * pmic specific info to smartreflex driver @@ -187,10 +210,10 @@ struct omap_smartreflex_dev_attr { * based decisions. */ struct omap_sr_class_data { - int (*enable)(struct voltagedomain *voltdm); - int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); - int (*configure)(struct voltagedomain *voltdm); - int (*notify)(struct voltagedomain *voltdm, u32 status); + int (*enable)(struct omap_sr *sr); + int (*disable)(struct omap_sr *sr, int is_volt_reset); + int (*configure)(struct omap_sr *sr); + int (*notify)(struct omap_sr *sr, u32 status); u8 notify_flags; u8 class_type; }; -- cgit v1.2.3 From 8b765d727d711650ab3521411fd48a0d8f62a84c Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:41:27 +0530 Subject: ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains. Associate a name with each SmartReflex instance from the hwmod data, rather than attempting to reuse the name of a voltage domain. The name from hwmod better reflects the smartreflex integration in the system. Also have the name passed to the drivers using pdata, which helps to remove any dependencies on SoC-specific structures. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 4224698cf8bd..884eaeea96be 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -144,6 +144,7 @@ #define OMAP3430_SR_ERRMAXLIMIT 0x02 struct omap_sr { + char *name; struct list_head node; struct platform_device *pdev; struct omap_sr_nvalue_table *nvalue_table; @@ -232,6 +233,7 @@ struct omap_sr_nvalue_table { /** * struct omap_sr_data - Smartreflex platform data. * + * @name: instance name * @ip_type: Smartreflex IP type. * @senp_mod: SENPENABLE value for the sr * @senn_mod: SENNENABLE value for sr @@ -243,6 +245,7 @@ struct omap_sr_nvalue_table { * @voltdm: Pointer to the voltage domain associated with the SR */ struct omap_sr_data { + const char *name; int ip_type; u32 senp_mod; u32 senn_mod; -- cgit v1.2.3 From 50e4a7d0b26c86628300edf4625cc5ff16a7a227 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:56:40 +0530 Subject: ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro Now that omap_test_timeout is only accessible from mach-omap2/, introduce a similar function for SR. This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 884eaeea96be..78b795ea2709 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -22,7 +22,7 @@ #include #include - +#include #include /* @@ -167,6 +167,27 @@ struct omap_sr { void __iomem *base; }; +/** + * test_cond_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + * + * Copied from omap_test_timeout */ +#define sr_test_cond_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + /** * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass * pmic specific info to smartreflex driver -- cgit v1.2.3 From 5e7f2e12e4ea14a34fb9b5941d60a4464fc8d40a Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 25 Apr 2012 11:19:44 +0530 Subject: ARM: OMAP2+: SmartReflex: Use per-OPP data structure The SmartReflex driver incorrectly treats some per-OPP data as data common to all OPPs (e.g., ERRMINLIMIT). Move this data into a per-OPP data structure. Furthermore, in order to make the SmartReflex implementation ready for the move to drivers/, remove the dependency from the SR driver code to the voltage layer by querying the data tables only from the SR device init code. Based on Paul's original code for the SmartReflex driver conversion. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 78b795ea2709..222f90183712 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -243,12 +243,16 @@ struct omap_sr_class_data { /** * struct omap_sr_nvalue_table - Smartreflex n-target value info * - * @efuse_offs: The offset of the efuse where n-target values are stored. - * @nvalue: The n-target value. + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target + * @volt_nominal: microvolts DC that the VDD is initially programmed to */ struct omap_sr_nvalue_table { u32 efuse_offs; u32 nvalue; + u32 errminlimit; + unsigned long volt_nominal; }; /** -- cgit v1.2.3 From 7fb149ffe357d6ad672cf9325181530b4c478a81 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 11:38:50 +0530 Subject: ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options Add a Kconfig menu (POWER_AVS) and rename the Kconfig options for the OMAP SmartReflex implementation: CONFIG_OMAP_SMARTREFLEX renames to CONFIG_POWER_AVS_OMAP CONFIG_OMAP_SMARTREFLEX_CLASS3 renames to CONFIG_POWER_AVS_OMAP_CLASS3 This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 222f90183712..3101e62a1213 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -207,7 +207,7 @@ struct omap_smartreflex_dev_attr { const char *sensor_voltdm_name; }; -#ifdef CONFIG_OMAP_SMARTREFLEX +#ifdef CONFIG_POWER_AVS_OMAP /* * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. * The smartreflex class driver should pass the class type. -- cgit v1.2.3 From ec3ab083a7a004282ee374bdaeb0aa603521b8eb Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 9 May 2012 10:09:56 -0500 Subject: slub: Get rid of the node field The node field is always page_to_nid(c->page). So its rather easy to replace. Note that there maybe slightly more overhead in various hot paths due to the need to shift the bits from page->flags. However, that is mostly compensated for by a smaller footprint of the kmem_cache_cpu structure (this patch reduces that to 3 words per cache) which allows better caching. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index c2f8c8bc56ed..ebdcf4ba42ee 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -48,7 +48,6 @@ struct kmem_cache_cpu { unsigned long tid; /* Globally unique transaction id */ struct page *page; /* The slab from which we are allocating */ struct page *partial; /* Partially allocated frozen slabs */ - int node; /* The node of the page (or -1 for debug) */ #ifdef CONFIG_SLUB_STATS unsigned stat[NR_SLUB_STAT_ITEMS]; #endif -- cgit v1.2.3 From e5e372da9a469dfe3ece40277090a7056c566838 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 22 May 2012 11:41:43 -0500 Subject: libceph: eliminate connection state "DEAD" The ceph connection state "DEAD" is never set and is therefore not needed. Eliminate it. Signed-off-by: Alex Elder Reviewed-by: Yehuda Sadeh --- include/linux/ceph/messenger.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 2521a95fa6d9..aa506cadea67 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -119,7 +119,6 @@ struct ceph_msg_pos { #define CLOSED 10 /* we've closed the connection */ #define SOCK_CLOSED 11 /* socket state changed to closed */ #define OPENING 13 /* open connection w/ (possibly new) peer */ -#define DEAD 14 /* dead, about to kfree */ #define BACKOFF 15 /* -- cgit v1.2.3 From 6384bb8b8e88a9c6bf2ae0d9517c2c0199177c34 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 29 May 2012 21:47:38 -0500 Subject: libceph: kill bad_proto ceph connection op No code sets a bad_proto method in its ceph connection operations vector, so just get rid of it. Signed-off-by: Alex Elder Reviewed-by: Yehuda Sadeh --- include/linux/ceph/messenger.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index aa506cadea67..74f6c9bd8074 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -31,9 +31,6 @@ struct ceph_connection_operations { int (*verify_authorizer_reply) (struct ceph_connection *con, int len); int (*invalidate_authorizer)(struct ceph_connection *con); - /* protocol version mismatch */ - void (*bad_proto) (struct ceph_connection *con); - /* there was some error on the socket (disconnect, whatever) */ void (*fault) (struct ceph_connection *con); -- cgit v1.2.3 From 15d9882c336db2db73ccf9871ae2398e452f694c Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Sat, 26 May 2012 23:26:43 -0500 Subject: libceph: embed ceph messenger structure in ceph_client A ceph client has a pointer to a ceph messenger structure in it. There is always exactly one ceph messenger for a ceph client, so there is no need to allocate it separate from the ceph client structure. Switch the ceph_client structure to embed its ceph_messenger structure. Signed-off-by: Alex Elder Reviewed-by: Yehuda Sadeh Reviewed-by: Sage Weil --- include/linux/ceph/libceph.h | 2 +- include/linux/ceph/messenger.h | 9 +++++---- 2 files changed, 6 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 92eef7c3d3c5..927361c4b0a8 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -131,7 +131,7 @@ struct ceph_client { u32 supported_features; u32 required_features; - struct ceph_messenger *msgr; /* messenger instance */ + struct ceph_messenger msgr; /* messenger instance */ struct ceph_mon_client monc; struct ceph_osd_client osdc; diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 74f6c9bd8074..3fbd4be804ed 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -211,10 +211,11 @@ extern int ceph_msgr_init(void); extern void ceph_msgr_exit(void); extern void ceph_msgr_flush(void); -extern struct ceph_messenger *ceph_messenger_create( - struct ceph_entity_addr *myaddr, - u32 features, u32 required); -extern void ceph_messenger_destroy(struct ceph_messenger *); +extern void ceph_messenger_init(struct ceph_messenger *msgr, + struct ceph_entity_addr *myaddr, + u32 supported_features, + u32 required_features, + bool nocrc); extern void ceph_con_init(struct ceph_messenger *msgr, struct ceph_connection *con); -- cgit v1.2.3 From 928443cd9644e7cfd46f687dbeffda2d1a357ff9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 22 May 2012 11:41:43 -0500 Subject: libceph: start separating connection flags from state A ceph_connection holds a mixture of connection state (as in "state machine" state) and connection flags in a single "state" field. To make the distinction more clear, define a new "flags" field and use it rather than the "state" field to hold Boolean flag values. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 3fbd4be804ed..920235e114ad 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -103,20 +103,25 @@ struct ceph_msg_pos { #define MAX_DELAY_INTERVAL (5 * 60 * HZ) /* - * ceph_connection state bit flags + * ceph_connection flag bits */ + #define LOSSYTX 0 /* we can close channel or drop messages on errors */ -#define CONNECTING 1 -#define NEGOTIATING 2 #define KEEPALIVE_PENDING 3 #define WRITE_PENDING 4 /* we have data ready to send */ +#define SOCK_CLOSED 11 /* socket state changed to closed */ +#define BACKOFF 15 + +/* + * ceph_connection states + */ +#define CONNECTING 1 +#define NEGOTIATING 2 #define STANDBY 8 /* no outgoing messages, socket closed. we keep * the ceph_connection around to maintain shared * state with the peer. */ #define CLOSED 10 /* we've closed the connection */ -#define SOCK_CLOSED 11 /* socket state changed to closed */ #define OPENING 13 /* open connection w/ (possibly new) peer */ -#define BACKOFF 15 /* * A single connection with another host. @@ -133,7 +138,8 @@ struct ceph_connection { struct ceph_messenger *msgr; struct socket *sock; - unsigned long state; /* connection state (see flags above) */ + unsigned long flags; + unsigned long state; const char *error_msg; /* error message, if any */ struct ceph_entity_addr peer_addr; /* peer address */ -- cgit v1.2.3 From ce2c8903e76e690846a00a0284e4bd9ee954d680 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 22 May 2012 22:15:49 -0500 Subject: libceph: start tracking connection socket state Start explicitly keeping track of the state of a ceph connection's socket, separate from the state of the connection itself. Create placeholder functions to encapsulate the state transitions. -------- | NEW* | transient initial state -------- | con_sock_state_init() v ---------- | CLOSED | initialized, but no socket (and no ---------- TCP connection) ^ \ | \ con_sock_state_connecting() | ---------------------- | \ + con_sock_state_closed() \ |\ \ | \ \ | ----------- \ | | CLOSING | socket event; \ | ----------- await close \ | ^ | | | | | + con_sock_state_closing() | | / \ | | / --------------- | | / \ v | / -------------- | / -----------------| CONNECTING | socket created, TCP | | / -------------- connect initiated | | | con_sock_state_connected() | | v ------------- | CONNECTED | TCP connection established ------------- Make the socket state an atomic variable, reinforcing that it's a distinct transtion with no possible "intermediate/both" states. This is almost certainly overkill at this point, though the transitions into CONNECTED and CLOSING state do get called via socket callback (the rest of the transitions occur with the connection mutex held). We can back out the atomicity later. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 920235e114ad..5e852f444f68 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -137,14 +137,18 @@ struct ceph_connection { const struct ceph_connection_operations *ops; struct ceph_messenger *msgr; + + atomic_t sock_state; struct socket *sock; + struct ceph_entity_addr peer_addr; /* peer address */ + struct ceph_entity_addr peer_addr_for_me; + unsigned long flags; unsigned long state; const char *error_msg; /* error message, if any */ - struct ceph_entity_addr peer_addr; /* peer address */ struct ceph_entity_name peer_name; /* peer name */ - struct ceph_entity_addr peer_addr_for_me; + unsigned peer_features; u32 connect_seq; /* identify the most recent connection attempt for this connection, client */ -- cgit v1.2.3 From 4126c0197bc8c58a0bb7fcda07b01b596b6fb4c5 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 7 May 2012 17:57:41 -0700 Subject: cpuidle: add support for states that affect multiple cpus On some ARM SMP SoCs (OMAP4460, Tegra 2, and probably more), the cpus cannot be independently powered down, either due to sequencing restrictions (on Tegra 2, cpu 0 must be the last to power down), or due to HW bugs (on OMAP4460, a cpu powering up will corrupt the gic state unless the other cpu runs a work around). Each cpu has a power state that it can enter without coordinating with the other cpu (usually Wait For Interrupt, or WFI), and one or more "coupled" power states that affect blocks shared between the cpus (L2 cache, interrupt controller, and sometimes the whole SoC). Entering a coupled power state must be tightly controlled on both cpus. The easiest solution to implementing coupled cpu power states is to hotplug all but one cpu whenever possible, usually using a cpufreq governor that looks at cpu load to determine when to enable the secondary cpus. This causes problems, as hotplug is an expensive operation, so the number of hotplug transitions must be minimized, leading to very slow response to loads, often on the order of seconds. This file implements an alternative solution, where each cpu will wait in the WFI state until all cpus are ready to enter a coupled state, at which point the coupled state function will be called on all cpus at approximately the same time. Once all cpus are ready to enter idle, they are woken by an smp cross call. At this point, there is a chance that one of the cpus will find work to do, and choose not to enter idle. A final pass is needed to guarantee that all cpus will call the power state enter function at the same time. During this pass, each cpu will increment the ready counter, and continue once the ready counter matches the number of online coupled cpus. If any cpu exits idle, the other cpus will decrement their counter and retry. To use coupled cpuidle states, a cpuidle driver must: Set struct cpuidle_device.coupled_cpus to the mask of all coupled cpus, usually the same as cpu_possible_mask if all cpus are part of the same cluster. The coupled_cpus mask must be set in the struct cpuidle_device for each cpu. Set struct cpuidle_device.safe_state to a state that is not a coupled state. This is usually WFI. Set CPUIDLE_FLAG_COUPLED in struct cpuidle_state.flags for each state that affects multiple cpus. Provide a struct cpuidle_state.enter function for each state that affects multiple cpus. This function is guaranteed to be called on all cpus at approximately the same time. The driver should ensure that the cpus all abort together if any cpu tries to abort once the function is called. update1: cpuidle: coupled: fix count of online cpus online_count was never incremented on boot, and was also counting cpus that were not part of the coupled set. Fix both issues by introducting a new function that counts online coupled cpus, and call it from register as well as the hotplug notifier. update2: cpuidle: coupled: fix decrementing ready count cpuidle_coupled_set_not_ready sometimes refuses to decrement the ready count in order to prevent a race condition. This makes it unsuitable for use when finished with idle. Add a new function cpuidle_coupled_set_done that decrements both the ready count and waiting count, and call it after idle is complete. Cc: Amit Kucheria Cc: Arjan van de Ven Cc: Trinabh Gupta Cc: Deepthi Dharwar Reviewed-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Colin Cross Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown --- include/linux/cpuidle.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 6c26a3da0e03..603844835bc7 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -57,6 +57,7 @@ struct cpuidle_state { /* Idle State Flags */ #define CPUIDLE_FLAG_TIME_VALID (0x01) /* is residency time measurable? */ +#define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */ #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000) @@ -100,6 +101,12 @@ struct cpuidle_device { struct list_head device_list; struct kobject kobj; struct completion kobj_unregister; + +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED + int safe_state_index; + cpumask_t coupled_cpus; + struct cpuidle_coupled *coupled; +#endif }; DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices); -- cgit v1.2.3 From 20ff51a36b2cd25ee7eb3216b6d02b68935435ba Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 7 May 2012 17:57:42 -0700 Subject: cpuidle: coupled: add parallel barrier function Adds cpuidle_coupled_parallel_barrier, which can be used by coupled cpuidle state enter functions to handle resynchronization after determining if any cpu needs to abort. The normal use case will be: static bool abort_flag; static atomic_t abort_barrier; int arch_cpuidle_enter(struct cpuidle_device *dev, ...) { if (arch_turn_off_irq_controller()) { /* returns an error if an irq is pending and would be lost if idle continued and turned off power */ abort_flag = true; } cpuidle_coupled_parallel_barrier(dev, &abort_barrier); if (abort_flag) { /* One of the cpus didn't turn off it's irq controller */ arch_turn_on_irq_controller(); return -EINTR; } /* continue with idle */ ... } This will cause all cpus to abort idle together if one of them needs to abort. Reviewed-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Colin Cross Signed-off-by: Len Brown --- include/linux/cpuidle.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 603844835bc7..5ab7183313ce 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -183,6 +183,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; } #endif +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED +void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a); +#endif + /****************************** * CPUIDLE GOVERNOR INTERFACE * ******************************/ -- cgit v1.2.3 From b9c7aff481f19dd655ae3ce6513817d625e2d47c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 29 May 2012 11:18:51 -0700 Subject: drivers/thermal/spear_thermal.c: add Device Tree probing capability SPEAr platforms now support DT and so must convert all drivers to support DT. This patch adds DT probing support for SPEAr thermal sensor driver and updates its documentation too. Also, as SPEAr is the only user of this driver and is only available with DT, make this an only DT driver. So, platform_data is completely removed and passed via DT now. Signed-off-by: Viresh Kumar Cc: Dan Carpenter Reviewed-by: Vincenzo Frascino Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/linux/platform_data/spear_thermal.h | 26 -------------------------- 1 file changed, 26 deletions(-) delete mode 100644 include/linux/platform_data/spear_thermal.h (limited to 'include/linux') diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h deleted file mode 100644 index 724f2e1cbbcb..000000000000 --- a/include/linux/platform_data/spear_thermal.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * SPEAr thermal driver platform data. - * - * Copyright (C) 2011-2012 ST Microelectronics - * Author: Vincenzo Frascino - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef SPEAR_THERMAL_H -#define SPEAR_THERMAL_H - -/* SPEAr Thermal Sensor Platform Data */ -struct spear_thermal_pdata { - /* flags used to enable thermal sensor */ - unsigned int thermal_flags; -}; - -#endif /* SPEAR_THERMAL_H */ -- cgit v1.2.3 From 141eba2e006dd8145bed2e49fae3de5af65ab9b0 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 24 May 2012 10:47:26 -0600 Subject: regmap: allow busses to request formatting with specific endianness Add a field to struct regmap_bus that allows bus drivers to request that register addresses and values be formatted with a specific endianness. The default endianness is unchanged from current operation: Big. Implement native endian formatting/parsing for 16- and 32-bit values. This will be enough to support regmap-mmio.c. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- include/linux/regmap.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 56af22ec9aba..26136b577009 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -43,6 +43,14 @@ struct reg_default { #ifdef CONFIG_REGMAP +enum regmap_endian { + /* Unspecified -> 0 -> Backwards compatible default */ + REGMAP_ENDIAN_DEFAULT = 0, + REGMAP_ENDIAN_BIG, + REGMAP_ENDIAN_LITTLE, + REGMAP_ENDIAN_NATIVE, +}; + /** * Configuration for the register map of a device. * @@ -84,6 +92,12 @@ struct reg_default { * @reg_defaults_raw: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. + * @reg_format_endian: Endianness for formatted register addresses. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. + * @val_format_endian: Endianness for formatted register values. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. */ struct regmap_config { const char *name; @@ -109,6 +123,9 @@ struct regmap_config { u8 write_flag_mask; bool use_single_rw; + + enum regmap_endian reg_format_endian; + enum regmap_endian val_format_endian; }; typedef int (*regmap_hw_write)(void *context, const void *data, @@ -133,6 +150,12 @@ typedef void (*regmap_hw_free_context)(void *context); * data. * @read_flag_mask: Mask to be set in the top byte of the register when doing * a read. + * @reg_format_endian_default: Default endianness for formatted register + * addresses. Used when the regmap_config specifies DEFAULT. If this is + * DEFAULT, BIG is assumed. + * @val_format_endian_default: Default endianness for formatted register + * values. Used when the regmap_config specifies DEFAULT. If this is + * DEFAULT, BIG is assumed. */ struct regmap_bus { bool fast_io; @@ -141,6 +164,8 @@ struct regmap_bus { regmap_hw_read read; regmap_hw_free_context free_context; u8 read_flag_mask; + enum regmap_endian reg_format_endian_default; + enum regmap_endian val_format_endian_default; }; struct regmap *regmap_init(struct device *dev, -- cgit v1.2.3 From b026ddbbd25e3560c8d69beb96a5980d96c59b43 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 31 May 2012 21:01:46 +0100 Subject: regmap: Constify regmap_irq_chip We should never be modifying it and it lets drivers declare it const. Signed-off-by: Mark Brown --- include/linux/regmap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 26136b577009..f9b624c83464 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -268,7 +268,7 @@ struct regmap_irq_chip { struct regmap_irq_chip_data; int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, - int irq_base, struct regmap_irq_chip *chip, + int irq_base, const struct regmap_irq_chip *chip, struct regmap_irq_chip_data **data); void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); -- cgit v1.2.3 From cffc9592fde309deafce12362e0a285108cfa3c8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 20 May 2012 10:30:21 +0800 Subject: regulator: core: Allow drivers to set voltage mapping table in regulator_desc Some regulator hardware use table based mapping can set volt_table in regulator_desc and use regulator_list_voltage_table() for their list_voltage callback. Signed-off-by: Axel Lin Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index b0432cc2b169..80226383e561 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -170,6 +170,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector @@ -189,6 +190,8 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + const unsigned int *volt_table; + unsigned int vsel_reg; unsigned int vsel_mask; unsigned int enable_reg; @@ -271,6 +274,8 @@ int regulator_mode_to_status(unsigned int); int regulator_list_voltage_linear(struct regulator_dev *rdev, unsigned int selector); +int regulator_list_voltage_table(struct regulator_dev *rdev, + unsigned int selector); int regulator_map_voltage_linear(struct regulator_dev *rdev, int min_uV, int max_uV); int regulator_map_voltage_iterate(struct regulator_dev *rdev, -- cgit v1.2.3 From 275c58d77062bbb85dbeb3843ba04f34aa50cf8e Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Wed, 23 May 2012 20:25:19 -0600 Subject: ACPI: Add an interface to evaluate _OST Added acpi_evaluate_hotplug_opt(). All ACPI hotplug handlers must call this function when evaluating _OST for hotplug operations. If the platform does not support _OST, this function returns AE_NOT_FOUND and has no effect on the platform. ACPI_HOTPLUG_OST is defined when all relevant ACPI hotplug operations, such as CPU, memory and container hotplug, are enabled. This assures consistent behavior among the hotplug operations with regarding the _OST support. When ACPI_HOTPLUG_OST is not defined, this function is a no-op. ACPI PCI hotplug is not enhanced to support _OST at this time since it is a legacy method being replaced by PCIe native hotplug. _OST support for ACPI PCI hotplug may be added in future if necessary. Some platforms may require the OS to support _OST in order to support ACPI hotplug operations. For example, if a platform has the management console where user can request a hotplug operation from, this _OST support would be required for the management console to show the result of the hotplug request to user. Added macro definitions of _OST source events and status codes. Also renamed OSC_SB_CPUHP_OST_SUPPORT to OSC_SB_HOTPLUG_OST_SUPPORT since this _OSC bit is not specific to CPU hotplug. This bit is defined in Table 6-147 of ACPI 5.0 as follows. Bits: 3 Field Name: Insertion / Ejection _OST Processing Support Definition: This bit is set if OSPM will evaluate the _OST object defined under a device when processing insertion and ejection source event codes. Signed-off-by: Toshi Kani Signed-off-by: Len Brown --- include/linux/acpi.h | 40 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index f421dd84f29d..b2b4d2ad7103 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -277,7 +277,7 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context); #define OSC_SB_PAD_SUPPORT 1 #define OSC_SB_PPC_OST_SUPPORT 2 #define OSC_SB_PR3_SUPPORT 4 -#define OSC_SB_CPUHP_OST_SUPPORT 8 +#define OSC_SB_HOTPLUG_OST_SUPPORT 8 #define OSC_SB_APEI_SUPPORT 16 extern bool osc_sb_apei_support_acked; @@ -309,6 +309,44 @@ extern bool osc_sb_apei_support_acked; extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req); + +/* Enable _OST when all relevant hotplug operations are enabled */ +#if defined(CONFIG_ACPI_HOTPLUG_CPU) && \ + (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \ + defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) && \ + (defined(CONFIG_ACPI_CONTAINER) || \ + defined(CONFIG_ACPI_CONTAINER_MODULE)) +#define ACPI_HOTPLUG_OST +#endif + +/* _OST Source Event Code (OSPM Action) */ +#define ACPI_OST_EC_OSPM_SHUTDOWN 0x100 +#define ACPI_OST_EC_OSPM_EJECT 0x103 +#define ACPI_OST_EC_OSPM_INSERTION 0x200 + +/* _OST General Processing Status Code */ +#define ACPI_OST_SC_SUCCESS 0x0 +#define ACPI_OST_SC_NON_SPECIFIC_FAILURE 0x1 +#define ACPI_OST_SC_UNRECOGNIZED_NOTIFY 0x2 + +/* _OST OS Shutdown Processing (0x100) Status Code */ +#define ACPI_OST_SC_OS_SHUTDOWN_DENIED 0x80 +#define ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS 0x81 +#define ACPI_OST_SC_OS_SHUTDOWN_COMPLETED 0x82 +#define ACPI_OST_SC_OS_SHUTDOWN_NOT_SUPPORTED 0x83 + +/* _OST Ejection Request (0x3, 0x103) Status Code */ +#define ACPI_OST_SC_EJECT_NOT_SUPPORTED 0x80 +#define ACPI_OST_SC_DEVICE_IN_USE 0x81 +#define ACPI_OST_SC_DEVICE_BUSY 0x82 +#define ACPI_OST_SC_EJECT_DEPENDENCY_BUSY 0x83 +#define ACPI_OST_SC_EJECT_IN_PROGRESS 0x84 + +/* _OST Insertion Request (0x200) Status Code */ +#define ACPI_OST_SC_INSERT_IN_PROGRESS 0x80 +#define ACPI_OST_SC_DRIVER_LOAD_FAILURE 0x81 +#define ACPI_OST_SC_INSERT_NOT_SUPPORTED 0x82 + extern void acpi_early_init(void); extern int acpi_nvs_register(__u64 start, __u64 size); -- cgit v1.2.3 From d594e987c6f5417cc63dd7e107a2a03a7eeee03f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 4 Jun 2012 03:50:35 +0000 Subject: sock_diag: add SK_MEMINFO_BACKLOG Adding socket backlog len in INET_DIAG_SKMEMINFO is really useful to diagnose various TCP problems. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/sock_diag.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index db4bae78bda9..6793fac5eab5 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -18,6 +18,7 @@ enum { SK_MEMINFO_FWD_ALLOC, SK_MEMINFO_WMEM_QUEUED, SK_MEMINFO_OPTMEM, + SK_MEMINFO_BACKLOG, SK_MEMINFO_VARS, }; -- cgit v1.2.3 From 29a6b6c060445eb46528785d51a2d8b0e6d898c4 Mon Sep 17 00:00:00 2001 From: Raffaele Recalcati Date: Sun, 3 Jun 2012 10:43:43 +0000 Subject: net/ethernet: ks8851_mll mac address configuration support added Signed-off-by: Raffaele Recalcati Signed-off-by: David S. Miller --- include/linux/ks8851_mll.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 include/linux/ks8851_mll.h (limited to 'include/linux') diff --git a/include/linux/ks8851_mll.h b/include/linux/ks8851_mll.h new file mode 100644 index 000000000000..e9ccfb59ed30 --- /dev/null +++ b/include/linux/ks8851_mll.h @@ -0,0 +1,33 @@ +/* + * ks8861_mll platform data struct definition + * Copyright (c) 2012 BTicino S.p.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LINUX_KS8851_MLL_H +#define _LINUX_KS8851_MLL_H + +#include + +/** + * struct ks8851_mll_platform_data - Platform data of the KS8851_MLL network driver + * @macaddr: The MAC address of the device, set to all 0:s to use the on in + * the chip. + */ +struct ks8851_mll_platform_data { + u8 mac_addr[ETH_ALEN]; +}; + +#endif -- cgit v1.2.3 From fe7c580073280c15bb4eb4f82bf20dddc1a68383 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 15 May 2012 15:57:06 +0200 Subject: NFC: Add target mode protocols to the polling loop startup routine Signed-off-by: Samuel Ortiz --- include/linux/nfc.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 0ae9b5857c83..548715881fb0 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -94,6 +94,8 @@ enum nfc_commands { * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes * @NFC_ATTR_COMM_MODE: Passive or active mode * @NFC_ATTR_RF_MODE: Initiator or target + * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for + * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -109,6 +111,8 @@ enum nfc_attrs { NFC_ATTR_COMM_MODE, NFC_ATTR_RF_MODE, NFC_ATTR_DEVICE_POWERED, + NFC_ATTR_IM_PROTOCOLS, + NFC_ATTR_TM_PROTOCOLS, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; -- cgit v1.2.3 From fc40a8c1a06ab7db45da790693dd9802612a055c Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 1 Jun 2012 13:21:13 +0200 Subject: NFC: Add target mode activation netlink event Userspace gets a netlink event upon target mode activation. The LLCP layer is also signaled when we get an ATR_REQ in order to get the remote general bytes. Signed-off-by: Samuel Ortiz --- include/linux/nfc.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 548715881fb0..d124e9273fcb 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -56,6 +56,10 @@ * %NFC_ATTR_PROTOCOLS) * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed * (it sends %NFC_ATTR_DEVICE_INDEX) + * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in + * target mode. + * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated + * from target mode. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -71,6 +75,8 @@ enum nfc_commands { NFC_EVENT_DEVICE_ADDED, NFC_EVENT_DEVICE_REMOVED, NFC_EVENT_TARGET_LOST, + NFC_EVENT_TM_ACTIVATED, + NFC_EVENT_TM_DEACTIVATED, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -122,6 +128,7 @@ enum nfc_attrs { #define NFC_NFCID1_MAXSIZE 10 #define NFC_SENSB_RES_MAXSIZE 12 #define NFC_SENSF_RES_MAXSIZE 18 +#define NFC_GB_MAXSIZE 48 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 -- cgit v1.2.3 From f212ad5e993e7efb996fc8ce94a5de8f0bd06d41 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 31 May 2012 00:02:26 +0200 Subject: NFC: Set the NFC device RF mode appropriately Signed-off-by: Samuel Ortiz --- include/linux/nfc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index d124e9273fcb..f4e6dd915b1c 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -146,6 +146,7 @@ enum nfc_attrs { /* NFC RF modes */ #define NFC_RF_INITIATOR 0 #define NFC_RF_TARGET 1 +#define NFC_RF_NONE 2 /* NFC protocols masks used in bitsets */ #define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) -- cgit v1.2.3 From cd1678f963298a9e777f3edb72d28bc18a3a32c2 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 29 May 2012 12:41:19 +0200 Subject: iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator Changes since V1: Apply Jonathan's review feedback: Revise device status attribute names, and split documentation into two sections. Add additional comments, and fix indention issues. Remove pointless zero initializations. Revise return value handling. Simplify some code sections. Split store_eeprom and sync handling into separate functions. Use strtobool where applicable. Document platform data structures using kernel-doc style. Use dev_to_iio_dev write_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0 Make patch target drivers/iio Changes since V2: Use for_each_clear_bit() and __set_bit() where applicable. Add descriptive comment. Avoid temporary for struct regulator. spi_device_id name use ad9523-1, ad9523 will be added later. Signed-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/frequency/ad9523.h | 195 +++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 include/linux/iio/frequency/ad9523.h (limited to 'include/linux') diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h new file mode 100644 index 000000000000..12ce3ee427fd --- /dev/null +++ b/include/linux/iio/frequency/ad9523.h @@ -0,0 +1,195 @@ +/* + * AD9523 SPI Low Jitter Clock Generator + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_FREQUENCY_AD9523_H_ +#define IIO_FREQUENCY_AD9523_H_ + +enum outp_drv_mode { + TRISTATE, + LVPECL_8mA, + LVDS_4mA, + LVDS_7mA, + HSTL0_16mA, + HSTL1_8mA, + CMOS_CONF1, + CMOS_CONF2, + CMOS_CONF3, + CMOS_CONF4, + CMOS_CONF5, + CMOS_CONF6, + CMOS_CONF7, + CMOS_CONF8, + CMOS_CONF9 +}; + +enum ref_sel_mode { + NONEREVERTIVE_STAY_ON_REFB, + REVERT_TO_REFA, + SELECT_REFA, + SELECT_REFB, + EXT_REF_SEL +}; + +/** + * struct ad9523_channel_spec - Output channel configuration + * + * @channel_num: Output channel number. + * @divider_output_invert_en: Invert the polarity of the output clock. + * @sync_ignore_en: Ignore chip-level SYNC signal. + * @low_power_mode_en: Reduce power used in the differential output modes. + * @use_alt_clock_src: Channel divider uses alternative clk source. + * @output_dis: Disables, powers down the entire channel. + * @driver_mode: Output driver mode (logic level family). + * @divider_phase: Divider initial phase after a SYNC. Range 0..63 + LSB = 1/2 of a period of the divider input clock. + * @channel_divider: 10-bit channel divider. + * @extended_name: Optional descriptive channel name. + */ + +struct ad9523_channel_spec { + unsigned channel_num; + bool divider_output_invert_en; + bool sync_ignore_en; + bool low_power_mode_en; + /* CH0..CH3 VCXO, CH4..CH9 VCO2 */ + bool use_alt_clock_src; + bool output_dis; + enum outp_drv_mode driver_mode; + unsigned char divider_phase; + unsigned short channel_divider; + char extended_name[16]; +}; + +enum pll1_rzero_resistor { + RZERO_883_OHM, + RZERO_677_OHM, + RZERO_341_OHM, + RZERO_135_OHM, + RZERO_10_OHM, + RZERO_USE_EXT_RES = 8, +}; + +enum rpole2_resistor { + RPOLE2_900_OHM, + RPOLE2_450_OHM, + RPOLE2_300_OHM, + RPOLE2_225_OHM, +}; + +enum rzero_resistor { + RZERO_3250_OHM, + RZERO_2750_OHM, + RZERO_2250_OHM, + RZERO_2100_OHM, + RZERO_3000_OHM, + RZERO_2500_OHM, + RZERO_2000_OHM, + RZERO_1850_OHM, +}; + +enum cpole1_capacitor { + CPOLE1_0_PF, + CPOLE1_8_PF, + CPOLE1_16_PF, + CPOLE1_24_PF, + _CPOLE1_24_PF, /* place holder */ + CPOLE1_32_PF, + CPOLE1_40_PF, + CPOLE1_48_PF, +}; + +/** + * struct ad9523_platform_data - platform specific information + * + * @vcxo_freq: External VCXO frequency in Hz + * @refa_diff_rcv_en: REFA differential/single-ended input selection. + * @refb_diff_rcv_en: REFB differential/single-ended input selection. + * @zd_in_diff_en: Zero Delay differential/single-ended input selection. + * @osc_in_diff_en: OSC differential/ single-ended input selection. + * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable. + * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable. + * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable. + * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable. + * @refa_r_div: PLL1 10-bit REFA R divider. + * @refb_r_div: PLL1 10-bit REFB R divider. + * @pll1_feedback_div: PLL1 10-bit Feedback N divider. + * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA). + * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection. + * @osc_in_feedback_en: PLL1 feedback path, local feedback from + * the OSC_IN receiver or zero delay mode + * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection. + * @ref_mode: Reference selection mode. + * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA). + * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4. + * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63. + * @pll2_freq_doubler_en: PLL2 frequency doubler enable. + * @pll2_r2_div: PLL2 R2 divider, range 0..31. + * @pll2_vco_diff_m1: VCO1 divider, range 3..5. + * @pll2_vco_diff_m2: VCO2 divider, range 3..5. + * @rpole2: PLL2 loop filter Rpole resistor value. + * @rzero: PLL2 loop filter Rzero resistor value. + * @cpole1: PLL2 loop filter Cpole capacitor value. + * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable. + * @num_channels: Array size of struct ad9523_channel_spec. + * @channels: Pointer to channel array. + * @name: Optional alternative iio device name. + */ + +struct ad9523_platform_data { + unsigned long vcxo_freq; + + /* Differential/ Single-Ended Input Configuration */ + bool refa_diff_rcv_en; + bool refb_diff_rcv_en; + bool zd_in_diff_en; + bool osc_in_diff_en; + + /* + * Valid if differential input disabled + * if false defaults to pos input + */ + bool refa_cmos_neg_inp_en; + bool refb_cmos_neg_inp_en; + bool zd_in_cmos_neg_inp_en; + bool osc_in_cmos_neg_inp_en; + + /* PLL1 Setting */ + unsigned short refa_r_div; + unsigned short refb_r_div; + unsigned short pll1_feedback_div; + unsigned short pll1_charge_pump_current_nA; + bool zero_delay_mode_internal_en; + bool osc_in_feedback_en; + enum pll1_rzero_resistor pll1_loop_filter_rzero; + + /* Reference */ + enum ref_sel_mode ref_mode; + + /* PLL2 Setting */ + unsigned int pll2_charge_pump_current_nA; + unsigned char pll2_ndiv_a_cnt; + unsigned char pll2_ndiv_b_cnt; + bool pll2_freq_doubler_en; + unsigned char pll2_r2_div; + unsigned char pll2_vco_diff_m1; /* 3..5 */ + unsigned char pll2_vco_diff_m2; /* 3..5 */ + + /* Loop Filter PLL2 */ + enum rpole2_resistor rpole2; + enum rzero_resistor rzero; + enum cpole1_capacitor cpole1; + bool rzero_bypass_en; + + /* Output Channel Configuration */ + int num_channels; + struct ad9523_channel_spec *channels; + + char name[SPI_NAME_SIZE]; +}; + +#endif /* IIO_FREQUENCY_AD9523_H_ */ -- cgit v1.2.3 From e31166f0fd48478866ee9661c36789126435ebe8 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 29 May 2012 12:41:20 +0200 Subject: iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers Changes since V1: Apply Jonathan's review feedback: Introduce and use IIO_ALTVOLTAGE. Fix up comments and documentation. Remove dead code. Reorder some code fragments. Add missing iio_device_free. Convert to new API. Fix-up out of staging includes. Removed pll_locked attribute. Changes since V2: Use module_spi_driver. adf4350_remove: move gpio_free after regulator. target patch to drivers/iio Signed-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/frequency/adf4350.h | 126 ++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 include/linux/iio/frequency/adf4350.h (limited to 'include/linux') diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h new file mode 100644 index 000000000000..b76b4a87065e --- /dev/null +++ b/include/linux/iio/frequency/adf4350.h @@ -0,0 +1,126 @@ +/* + * ADF4350/ADF4351 SPI PLL driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_PLL_ADF4350_H_ +#define IIO_PLL_ADF4350_H_ + +/* Registers */ +#define ADF4350_REG0 0 +#define ADF4350_REG1 1 +#define ADF4350_REG2 2 +#define ADF4350_REG3 3 +#define ADF4350_REG4 4 +#define ADF4350_REG5 5 + +/* REG0 Bit Definitions */ +#define ADF4350_REG0_FRACT(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG0_INT(x) (((x) & 0xFFFF) << 15) + +/* REG1 Bit Definitions */ +#define ADF4350_REG1_MOD(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG1_PHASE(x) (((x) & 0xFFF) << 15) +#define ADF4350_REG1_PRESCALER (1 << 27) + +/* REG2 Bit Definitions */ +#define ADF4350_REG2_COUNTER_RESET_EN (1 << 3) +#define ADF4350_REG2_CP_THREESTATE_EN (1 << 4) +#define ADF4350_REG2_POWER_DOWN_EN (1 << 5) +#define ADF4350_REG2_PD_POLARITY_POS (1 << 6) +#define ADF4350_REG2_LDP_6ns (1 << 7) +#define ADF4350_REG2_LDP_10ns (0 << 7) +#define ADF4350_REG2_LDF_FRACT_N (0 << 8) +#define ADF4350_REG2_LDF_INT_N (1 << 8) +#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x) (((((x)-312) / 312) & 0xF) << 9) +#define ADF4350_REG2_DOUBLE_BUFF_EN (1 << 13) +#define ADF4350_REG2_10BIT_R_CNT(x) ((x) << 14) +#define ADF4350_REG2_RDIV2_EN (1 << 24) +#define ADF4350_REG2_RMULT2_EN (1 << 25) +#define ADF4350_REG2_MUXOUT(x) ((x) << 26) +#define ADF4350_REG2_NOISE_MODE(x) ((x) << 29) +#define ADF4350_MUXOUT_THREESTATE 0 +#define ADF4350_MUXOUT_DVDD 1 +#define ADF4350_MUXOUT_GND 2 +#define ADF4350_MUXOUT_R_DIV_OUT 3 +#define ADF4350_MUXOUT_N_DIV_OUT 4 +#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT 5 +#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT 6 + +/* REG3 Bit Definitions */ +#define ADF4350_REG3_12BIT_CLKDIV(x) ((x) << 3) +#define ADF4350_REG3_12BIT_CLKDIV_MODE(x) ((x) << 16) +#define ADF4350_REG3_12BIT_CSR_EN (1 << 18) +#define ADF4351_REG3_CHARGE_CANCELLATION_EN (1 << 21) +#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN (1 << 22) +#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH (1 << 23) + +/* REG4 Bit Definitions */ +#define ADF4350_REG4_OUTPUT_PWR(x) ((x) << 3) +#define ADF4350_REG4_RF_OUT_EN (1 << 5) +#define ADF4350_REG4_AUX_OUTPUT_PWR(x) ((x) << 6) +#define ADF4350_REG4_AUX_OUTPUT_EN (1 << 8) +#define ADF4350_REG4_AUX_OUTPUT_FUND (1 << 9) +#define ADF4350_REG4_AUX_OUTPUT_DIV (0 << 9) +#define ADF4350_REG4_MUTE_TILL_LOCK_EN (1 << 10) +#define ADF4350_REG4_VCO_PWRDOWN_EN (1 << 11) +#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x) ((x) << 12) +#define ADF4350_REG4_RF_DIV_SEL(x) ((x) << 20) +#define ADF4350_REG4_FEEDBACK_DIVIDED (0 << 23) +#define ADF4350_REG4_FEEDBACK_FUND (1 << 23) + +/* REG5 Bit Definitions */ +#define ADF4350_REG5_LD_PIN_MODE_LOW (0 << 22) +#define ADF4350_REG5_LD_PIN_MODE_DIGITAL (1 << 22) +#define ADF4350_REG5_LD_PIN_MODE_HIGH (3 << 22) + +/* Specifications */ +#define ADF4350_MAX_OUT_FREQ 4400000000ULL /* Hz */ +#define ADF4350_MIN_OUT_FREQ 137500000 /* Hz */ +#define ADF4351_MIN_OUT_FREQ 34375000 /* Hz */ +#define ADF4350_MIN_VCO_FREQ 2200000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_45_PRESC 3000000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_PFD 32000000 /* Hz */ +#define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */ +#define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */ +#define ADF4350_MAX_MODULUS 4095 + +/** + * struct adf4350_platform_data - platform specific information + * @name: Optional device name. + * @clkin: REFin frequency in Hz. + * @channel_spacing: Channel spacing in Hz (influences MODULUS). + * @power_up_frequency: Optional, If set in Hz the PLL tunes to the desired + * frequency on probe. + * @ref_div_factor: Optional, if set the driver skips dynamic calculation + * and uses this default value instead. + * @ref_doubler_en: Enables reference doubler. + * @ref_div2_en: Enables reference divider. + * @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2. + * @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3. + * @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4. + * @gpio_lock_detect: Optional, if set with a valid GPIO number, + * pll lock state is tested upon read. + * If not used - set to -1. + */ + +struct adf4350_platform_data { + char name[32]; + unsigned long clkin; + unsigned long channel_spacing; + unsigned long long power_up_frequency; + + unsigned short ref_div_factor; /* 10-bit R counter */ + bool ref_doubler_en; + bool ref_div2_en; + + unsigned r2_user_settings; + unsigned r3_user_settings; + unsigned r4_user_settings; + int gpio_lock_detect; +}; + +#endif /* IIO_PLL_ADF4350_H_ */ -- cgit v1.2.3 From e4e8b7765867e8f4705bcc18b8930edbe0e4ef3c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 4 Jun 2012 10:50:02 +0200 Subject: iio: Add iio_device_get() This patch add the iio_device_get() function, which increases the reference count of a iio device. The matching function to decrease the reference count - iio_device_put() - already exists. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3a4f6a3ab80d..3238fa3374f7 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -438,6 +438,17 @@ static inline struct iio_dev *dev_to_iio_dev(struct device *dev) return container_of(dev, struct iio_dev, dev); } +/** + * iio_device_get() - increment reference count for the device + * @indio_dev: IIO device structure + * + * Returns: The passed IIO device + **/ +static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) +{ + return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL; +} + /* Can we make this smaller? */ #define IIO_ALIGN L1_CACHE_BYTES /** -- cgit v1.2.3 From 5212cc8a9d833791a7aec566db136e78951f203d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 4 Jun 2012 11:36:11 +0200 Subject: iio: Add helper functions for enum style channel attributes We often have the case were we do have a enum style channel attribute. These attributes have in common that they are a list of string values which usually map in a 1-to-1 fashion to integer values. This patch implements some common helper code for implementing enum style channel attributes using extended channel attributes. The helper functions take care of converting between the string and integer values, as well providing a function for "_available" attributes which list all available enum items. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 64 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3238fa3374f7..944c63511731 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -129,6 +129,70 @@ struct iio_chan_spec_ext_info { uintptr_t private; }; +/** + * struct iio_enum - Enum channel info attribute + * items: A array of strings. + * num_items: Length of the item array. + * set: Set callback function, may be NULL. + * get: Get callback function, may be NULL. + * + * The iio_enum struct can be used to implement enum style channel attributes. + * Enum style attributes are those which have a set of strings which map to + * unsigned integer values. The IIO enum helper code takes care of mapping + * between value and string as well as generating a "_available" file which + * contains a list of all available items. The set callback will be called when + * the attribute is updated. The last parameter is the index to the newly + * activated item. The get callback will be used to query the currently active + * item and is supposed to return the index for it. + */ +struct iio_enum { + const char * const *items; + unsigned int num_items; + int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int); + int (*get)(struct iio_dev *, const struct iio_chan_spec *); +}; + +ssize_t iio_enum_available_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_write(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, const char *buf, + size_t len); + +/** + * IIO_ENUM() - Initialize enum extended channel attribute + * @_name: Attribute name + * @_shared: Whether the attribute is shared between all channels + * @_e: Pointer to a iio_enum struct + * + * This should usually be used together with IIO_ENUM_AVAILABLE() + */ +#define IIO_ENUM(_name, _shared, _e) \ +{ \ + .name = (_name), \ + .shared = (_shared), \ + .read = iio_enum_read, \ + .write = iio_enum_write, \ + .private = (uintptr_t)(_e), \ +} + +/** + * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute + * @_name: Attribute name ("_available" will be appended to the name) + * @_e: Pointer to a iio_enum struct + * + * Creates a read only attribute which list all the available enum items in a + * space separated list. This should usually be used together with IIO_ENUM() + */ +#define IIO_ENUM_AVAILABLE(_name, _e) \ +{ \ + .name = (_name "_available"), \ + .shared = true, \ + .read = iio_enum_available_read, \ + .private = (uintptr_t)(_e), \ +} + /** * struct iio_chan_spec - specification of a single channel * @type: What type of measurement is the channel making. -- cgit v1.2.3 From dbdc025bb239ce62c9b4d28c459a98f22ce9ec0a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 4 Jun 2012 11:36:28 +0200 Subject: staging:iio: Move DAC drivers out of staging The IIO DAC drivers are in a reasonably good shape. They all make use of channel spec and non of them provides non-documented sysfs attributes. Code style should be OK as well, both checkpatch and coccicheck only report trivial issues. So lets move the whole folder out of staging. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/dac/ad5421.h | 28 ++++++++++++++++++++++++++++ include/linux/iio/dac/ad5504.h | 16 ++++++++++++++++ include/linux/iio/dac/ad5791.h | 25 +++++++++++++++++++++++++ include/linux/iio/dac/max517.h | 15 +++++++++++++++ 4 files changed, 84 insertions(+) create mode 100644 include/linux/iio/dac/ad5421.h create mode 100644 include/linux/iio/dac/ad5504.h create mode 100644 include/linux/iio/dac/ad5791.h create mode 100644 include/linux/iio/dac/max517.h (limited to 'include/linux') diff --git a/include/linux/iio/dac/ad5421.h b/include/linux/iio/dac/ad5421.h new file mode 100644 index 000000000000..8fd8f057a890 --- /dev/null +++ b/include/linux/iio/dac/ad5421.h @@ -0,0 +1,28 @@ +#ifndef __IIO_DAC_AD5421_H__ +#define __IIO_DAC_AD5421_H__ + +/** + * enum ad5421_current_range - Current range the AD5421 is configured for. + * @AD5421_CURRENT_RANGE_4mA_20mA: 4 mA to 20 mA (RANGE1,0 pins = 00) + * @AD5421_CURRENT_RANGE_3mA8_21mA: 3.8 mA to 21 mA (RANGE1,0 pins = x1) + * @AD5421_CURRENT_RANGE_3mA2_24mA: 3.2 mA to 24 mA (RANGE1,0 pins = 10) + */ + +enum ad5421_current_range { + AD5421_CURRENT_RANGE_4mA_20mA, + AD5421_CURRENT_RANGE_3mA8_21mA, + AD5421_CURRENT_RANGE_3mA2_24mA, +}; + +/** + * struct ad5421_platform_data - AD5421 DAC driver platform data + * @external_vref: whether an external reference voltage is used or not + * @current_range: Current range the AD5421 is configured for + */ + +struct ad5421_platform_data { + bool external_vref; + enum ad5421_current_range current_range; +}; + +#endif diff --git a/include/linux/iio/dac/ad5504.h b/include/linux/iio/dac/ad5504.h new file mode 100644 index 000000000000..43895376a9ca --- /dev/null +++ b/include/linux/iio/dac/ad5504.h @@ -0,0 +1,16 @@ +/* + * AD5504 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5504_H_ +#define SPI_AD5504_H_ + +struct ad5504_platform_data { + u16 vref_mv; +}; + +#endif /* SPI_AD5504_H_ */ diff --git a/include/linux/iio/dac/ad5791.h b/include/linux/iio/dac/ad5791.h new file mode 100644 index 000000000000..45ee281c6660 --- /dev/null +++ b/include/linux/iio/dac/ad5791.h @@ -0,0 +1,25 @@ +/* + * AD5791 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5791_H_ +#define SPI_AD5791_H_ + +/** + * struct ad5791_platform_data - platform specific information + * @vref_pos_mv: Vdd Positive Analog Supply Volatge (mV) + * @vref_neg_mv: Vdd Negative Analog Supply Volatge (mV) + * @use_rbuf_gain2: ext. amplifier connected in gain of two configuration + */ + +struct ad5791_platform_data { + u16 vref_pos_mv; + u16 vref_neg_mv; + bool use_rbuf_gain2; +}; + +#endif /* SPI_AD5791_H_ */ diff --git a/include/linux/iio/dac/max517.h b/include/linux/iio/dac/max517.h new file mode 100644 index 000000000000..f6d1d252f08d --- /dev/null +++ b/include/linux/iio/dac/max517.h @@ -0,0 +1,15 @@ +/* + * MAX517 DAC driver + * + * Copyright 2011 Roland Stigge + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_DAC_MAX517_H_ +#define IIO_DAC_MAX517_H_ + +struct max517_platform_data { + u16 vref_mv[2]; +}; + +#endif /* IIO_DAC_MAX517_H_ */ -- cgit v1.2.3 From c1a7b32a14138f908df52d7c53b5ce3415ec6b50 Mon Sep 17 00:00:00 2001 From: Takuya Yoshikawa Date: Sun, 20 May 2012 13:15:07 +0900 Subject: KVM: Avoid wasting pages for small lpage_info arrays lpage_info is created for each large level even when the memory slot is not for RAM. This means that when we add one slot for a PCI device, we end up allocating at least KVM_NR_PAGE_SIZES - 1 pages by vmalloc(). To make things worse, there is an increasing number of devices which would result in more pages being wasted this way. This patch mitigates this problem by using kvm_kvzalloc(). Signed-off-by: Takuya Yoshikawa Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index c4464356b35b..19b83f6efa49 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -535,6 +535,9 @@ int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu); void kvm_free_physmem(struct kvm *kvm); +void *kvm_kvzalloc(unsigned long size); +void kvm_kvfree(const void *addr); + #ifndef __KVM_HAVE_ARCH_VM_ALLOC static inline struct kvm *kvm_arch_alloc_vm(void) { -- cgit v1.2.3 From a43fd50dc99a5f65505f174eca5a421707d73b4c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Jun 2012 14:34:03 +0100 Subject: regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown --- include/linux/regmap.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 56af22ec9aba..58ec0cba0ae6 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -219,6 +219,7 @@ struct regmap_irq { * @status_base: Base status register address. * @mask_base: Base mask register address. * @ack_base: Base ack address. If zero then the chip is clear on read. + * @wake_base: Base address for wake enables. If zero unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. * * @num_regs: Number of registers in each control bank. @@ -232,6 +233,7 @@ struct regmap_irq_chip { unsigned int status_base; unsigned int mask_base; unsigned int ack_base; + unsigned int wake_base; unsigned int irq_reg_stride; int num_regs; -- cgit v1.2.3 From 8feb8e896d77439146d2e2ab3d0ab55bb5baf5fc Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Tue, 29 May 2012 15:16:05 +0800 Subject: smp: Remove ipi_call_lock[_irq]()/ipi_call_unlock[_irq]() There is no user of those APIs anymore, just remove it. Signed-off-by: Yong Zhang Cc: ralf@linux-mips.org Cc: sshtylyov@mvista.com Cc: david.daney@cavium.com Cc: nikunj@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: axboe@kernel.dk Cc: Andrew Morton Link: http://lkml.kernel.org/r/1338275765-3217-11-git-send-email-yong.zhang0@gmail.com Acked-by: Srivatsa S. Bhat Acked-by: Peter Zijlstra Signed-off-by: Thomas Gleixner --- include/linux/smp.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/smp.h b/include/linux/smp.h index 717fb746c9a8..a34d4f15430d 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -90,10 +90,6 @@ void kick_all_cpus_sync(void); void __init call_function_init(void); void generic_smp_call_function_single_interrupt(void); void generic_smp_call_function_interrupt(void); -void ipi_call_lock(void); -void ipi_call_unlock(void); -void ipi_call_lock_irq(void); -void ipi_call_unlock_irq(void); #else static inline void call_function_init(void) { } #endif -- cgit v1.2.3 From 43cc7e86f3200b094e2960b732623aeec00b482d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 15 May 2012 17:26:16 +0200 Subject: smp: Remove num_booting_cpus() No users. Signed-off-by: Thomas Gleixner Cc: Srivatsa S. Bhat Cc: Rusty Russell --- include/linux/smp.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/smp.h b/include/linux/smp.h index a34d4f15430d..dd6f06be3c9f 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -177,7 +177,6 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) } while (0) static inline void smp_send_reschedule(int cpu) { } -#define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) #define smp_call_function_many(mask, func, info, wait) \ (up_smp_call_function(func, info)) -- cgit v1.2.3 From 5dad021dee7c3c601a9e17d86139e586c05c2ee2 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 15 May 2012 14:50:58 +0300 Subject: nl80211: add new rssi event to indicate beacon loss Tell userspace about beacon loss event. This event doesn't replace the deauth/disassoc that might come if the AP is not available. The driver can send this event in order to hint userspace what might follow (which in turn can use it as roaming trigger). Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index a6959f72745e..6930dddad18a 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2534,10 +2534,14 @@ enum nl80211_attr_cqm { * configured threshold * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the * configured threshold + * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. + * (Note that deauth/disassoc will still follow if the AP is not + * available. This event might get used as roaming event, etc.) */ enum nl80211_cqm_rssi_threshold_event { NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, }; -- cgit v1.2.3 From aa430da41019c1694f6a8e3b8bef1d12ed52b0ad Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 16 May 2012 23:50:18 +0200 Subject: cfg80211: provide channel to start_ap function Instead of setting the channel first and then starting the AP, let cfg80211 store the channel and provide it as one of the AP settings. This means that now you have to set the channel before you can start an AP interface, but since hostapd/wpa_supplicant always do that we're OK with this change. Alternatively, it's now possible to give the channel as an attribute to the start-ap nl80211 command, overriding any preset channel. Cc: Kalle Valo Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 6930dddad18a..85e5037a218d 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -170,6 +170,8 @@ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. + * The channel to use can be set on the interface or be given using the + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP -- cgit v1.2.3 From bacef661acdb634170a8faddbc1cf28e8f8b9eee Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 25 May 2012 16:20:31 +0100 Subject: x86-64/efi: Use EFI to deal with platform wall clock Other than ix86, x86-64 on EFI so far didn't set the {g,s}et_wallclock accessors to the EFI routines, thus incorrectly using raw RTC accesses instead. Simply removing the #ifdef around the respective code isn't enough, however: While so far early get-time calls were done in physical mode, this doesn't work properly for x86-64, as virtual addresses would still need to be set up for all runtime regions (which wasn't the case on the system I have access to), so instead the patch moves the call to efi_enter_virtual_mode() ahead (which in turn allows to drop all code related to calling efi-get-time in physical mode). Additionally the earlier calling of efi_set_executable() requires the CPA code to cope, i.e. during early boot it must be avoided to call cpa_flush_array(), as the first thing this function does is a BUG_ON(irqs_disabled()). Also make the two EFI functions in question here static - they're not being referenced elsewhere. Signed-off-by: Jan Beulich Tested-by: Matt Fleming Acked-by: Matthew Garrett Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/4FBFBF5F020000780008637F@nat28.tlf.novell.com Signed-off-by: Ingo Molnar --- include/linux/efi.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/efi.h b/include/linux/efi.h index ec45ccd8708a..103adc6d7e3a 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -503,8 +503,6 @@ extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); -extern unsigned long efi_get_time(void); -extern int efi_set_rtc_mmss(unsigned long nowtime); extern void efi_reserve_boot_services(void); extern struct efi_memory_map memmap; -- cgit v1.2.3 From 23d0bb834e264f38335f19fe601564b8422431e7 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 28 May 2012 15:26:56 +0100 Subject: GFS2: Add "top dir" flag support This patch adds support for the "top dir" flag. Currently this is unused but a subsequent patch is planned which will add support for the Orlov allocation policy when allocating subdirectories in a parent with this flag set. In order to ensure backward compatible behaviour, mkfs.gfs2 does not currently tag the root directory with this flag, it must always be set manually. Signed-off-by: Steven Whitehouse --- include/linux/gfs2_ondisk.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index fa98bdb073b9..e8ccf6ff3b4d 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -214,6 +214,7 @@ enum { gfs2fl_NoAtime = 7, gfs2fl_Sync = 8, gfs2fl_System = 9, + gfs2fl_TopLevel = 10, gfs2fl_TruncInProg = 29, gfs2fl_InheritDirectio = 30, gfs2fl_InheritJdata = 31, @@ -230,8 +231,9 @@ enum { #define GFS2_DIF_NOATIME 0x00000080 #define GFS2_DIF_SYNC 0x00000100 #define GFS2_DIF_SYSTEM 0x00000200 /* New in gfs2 */ +#define GFS2_DIF_TOPDIR 0x00000400 /* New in gfs2 */ #define GFS2_DIF_TRUNC_IN_PROG 0x20000000 /* New in gfs2 */ -#define GFS2_DIF_INHERIT_DIRECTIO 0x40000000 +#define GFS2_DIF_INHERIT_DIRECTIO 0x40000000 /* only in gfs1 */ #define GFS2_DIF_INHERIT_JDATA 0x80000000 struct gfs2_dinode { -- cgit v1.2.3 From a737f256bf14adf94920aa70d150ab4dcd145109 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Sun, 3 Jun 2012 21:17:48 +0300 Subject: KVM: Cleanup the kvm_print functions and introduce pr_XX wrappers Introduces a couple of print functions, which are essentially wrappers around standard printk functions, with a KVM: prefix. Functions introduced or modified are: - kvm_err(fmt, ...) - kvm_info(fmt, ...) - kvm_debug(fmt, ...) - kvm_pr_unimpl(fmt, ...) - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...) Signed-off-by: Christoffer Dall Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 19b83f6efa49..27ac8a4767fa 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -314,13 +314,19 @@ struct kvm { long tlbs_dirty; }; -/* The guest did something we don't support. */ -#define pr_unimpl(vcpu, fmt, ...) \ - pr_err_ratelimited("kvm: %i: cpu%i " fmt, \ - current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__) +#define kvm_err(fmt, ...) \ + pr_err("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__) +#define kvm_info(fmt, ...) \ + pr_info("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__) +#define kvm_debug(fmt, ...) \ + pr_debug("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__) +#define kvm_pr_unimpl(fmt, ...) \ + pr_err_ratelimited("kvm [%i]: " fmt, \ + task_tgid_nr(current), ## __VA_ARGS__) -#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt) -#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt) +/* The guest did something we don't support. */ +#define vcpu_unimpl(vcpu, fmt, ...) \ + kvm_pr_unimpl("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__) static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i) { -- cgit v1.2.3 From 67130934fb579fdf0f2f6d745960264378b57dc8 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Sat, 26 May 2012 23:26:43 -0500 Subject: libceph: embed ceph connection structure in mon_client A monitor client has a pointer to a ceph connection structure in it. This is the only one of the three ceph client types that do it this way; the OSD and MDS clients embed the connection into their main structures. There is always exactly one ceph connection for a monitor client, so there is no need to allocate it separate from the monitor client structure. So switch the ceph_mon_client structure to embed its ceph_connection structure. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/mon_client.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/mon_client.h b/include/linux/ceph/mon_client.h index 545f85917780..2113e3850a4e 100644 --- a/include/linux/ceph/mon_client.h +++ b/include/linux/ceph/mon_client.h @@ -70,7 +70,7 @@ struct ceph_mon_client { bool hunting; int cur_mon; /* last monitor i contacted */ unsigned long sub_sent, sub_renew_after; - struct ceph_connection *con; + struct ceph_connection con; bool have_fsid; /* pending generic requests */ -- cgit v1.2.3 From 1bfd89f4e6e1adc6a782d94aa5d4c53be1e404d7 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Sat, 26 May 2012 23:26:43 -0500 Subject: libceph: fully initialize connection in con_init() Move the initialization of a ceph connection's private pointer, operations vector pointer, and peer name information into ceph_con_init(). Rearrange the arguments so the connection pointer is first. Hide the byte-swapping of the peer entity number inside ceph_con_init() Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 5e852f444f68..dd27837f79ac 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -227,8 +227,10 @@ extern void ceph_messenger_init(struct ceph_messenger *msgr, u32 required_features, bool nocrc); -extern void ceph_con_init(struct ceph_messenger *msgr, - struct ceph_connection *con); +extern void ceph_con_init(struct ceph_connection *con, void *private, + const struct ceph_connection_operations *ops, + struct ceph_messenger *msgr, __u8 entity_type, + __u64 entity_num); extern void ceph_con_open(struct ceph_connection *con, struct ceph_entity_addr *addr); extern bool ceph_con_opened(struct ceph_connection *con); -- cgit v1.2.3 From 38941f8031bf042dba3ced6394ba3a3b16c244ea Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 1 Jun 2012 14:56:43 -0500 Subject: libceph: have messages point to their connection When a ceph message is queued for sending it is placed on a list of pending messages (ceph_connection->out_queue). When they are actually sent over the wire, they are moved from that list to another (ceph_connection->out_sent). When acknowledgement for the message is received, it is removed from the sent messages list. During that entire time the message is "in the possession" of a single ceph connection. Keep track of that connection in the message. This will be used in the next patch (and is a helpful bit of information for debugging anyway). Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index dd27837f79ac..6df837f72761 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -77,7 +77,10 @@ struct ceph_msg { unsigned nr_pages; /* size of page array */ unsigned page_alignment; /* io offset in first page */ struct ceph_pagelist *pagelist; /* instead of pages */ + + struct ceph_connection *con; struct list_head list_head; + struct kref kref; struct bio *bio; /* instead of pages/pagelist */ struct bio *bio_iter; /* bio iterator */ -- cgit v1.2.3 From 6740a845b2543cc46e1902ba21bac743fbadd0dc Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 1 Jun 2012 14:56:43 -0500 Subject: libceph: make ceph_con_revoke() a msg operation ceph_con_revoke() is passed both a message and a ceph connection. Now that any message associated with a connection holds a pointer to that connection, there's no need to provide the connection when revoking a message. This has the added benefit of precluding the possibility of the providing the wrong connection pointer. If the message's connection pointer is null, it is not being tracked by any connection, so revoking it is a no-op. This is supported as a convenience for upper layers, so they can revoke a message that is not actually "in flight." Rename the function ceph_msg_revoke() to reflect that it is really an operation on a message, not a connection. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 6df837f72761..9008f81c20cd 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -239,7 +239,8 @@ extern void ceph_con_open(struct ceph_connection *con, extern bool ceph_con_opened(struct ceph_connection *con); extern void ceph_con_close(struct ceph_connection *con); extern void ceph_con_send(struct ceph_connection *con, struct ceph_msg *msg); -extern void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg); + +extern void ceph_msg_revoke(struct ceph_msg *msg); extern void ceph_con_revoke_message(struct ceph_connection *con, struct ceph_msg *msg); extern void ceph_con_keepalive(struct ceph_connection *con); -- cgit v1.2.3 From 8921d114f5574c6da2cdd00749d185633ecf88f3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 1 Jun 2012 14:56:43 -0500 Subject: libceph: make ceph_con_revoke_message() a msg op ceph_con_revoke_message() is passed both a message and a ceph connection. A ceph_msg allocated for incoming messages on a connection always has a pointer to that connection, so there's no need to provide the connection when revoking such a message. Note that the existing logic does not preclude the message supplied being a null/bogus message pointer. The only user of this interface is the OSD client, and the only value an osd client passes is a request's r_reply field. That is always non-null (except briefly in an error path in ceph_osdc_alloc_request(), and that drops the only reference so the request won't ever have a reply to revoke). So we can safely assume the passed-in message is non-null, but add a BUG_ON() to make it very obvious we are imposing this restriction. Rename the function ceph_msg_revoke_incoming() to reflect that it is really an operation on an incoming message. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 9008f81c20cd..a334dbd1b324 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -241,8 +241,8 @@ extern void ceph_con_close(struct ceph_connection *con); extern void ceph_con_send(struct ceph_connection *con, struct ceph_msg *msg); extern void ceph_msg_revoke(struct ceph_msg *msg); -extern void ceph_con_revoke_message(struct ceph_connection *con, - struct ceph_msg *msg); +extern void ceph_msg_revoke_incoming(struct ceph_msg *msg); + extern void ceph_con_keepalive(struct ceph_connection *con); extern struct ceph_connection *ceph_con_get(struct ceph_connection *con); extern void ceph_con_put(struct ceph_connection *con); -- cgit v1.2.3 From 778b032d96909690c19d84f8d17c13be65ed6f8e Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 29 May 2012 21:30:08 +0200 Subject: uprobes: Kill uprobes_srcu/uprobe_srcu_id Kill the no longer needed uprobes_srcu/uprobe_srcu_id code. It doesn't really work anyway. synchronize_srcu() can only synchronize with the code "inside" the srcu_read_lock/srcu_read_unlock section, while uprobe_pre_sstep_notifier() does srcu_read_lock() _after_ we already hit the breakpoint. I guess this probably works "in practice". synchronize_srcu() is slow and it implies synchronize_sched(), and the probed task enters the non- preemptible section at the start of exception handler. Still this is not right at least in theory, and task->uprobe_srcu_id blows task_struct. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju Cc: Ananth N Mavinakayanahalli Cc: Anton Arapov Cc: Linus Torvalds Cc: Masami Hiramatsu Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120529193008.GG8057@redhat.com Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 6029d8c54476..6bd19655c1a7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1569,7 +1569,6 @@ struct task_struct { #endif #ifdef CONFIG_UPROBES struct uprobe_task *utask; - int uprobe_srcu_id; #endif }; -- cgit v1.2.3 From c48b60538c3ba05a7a2713c4791b25405525431b Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Thu, 1 Mar 2012 17:28:14 -0500 Subject: perf/x86: Use rdpmc() rather than rdmsr() when possible in the kernel The rdpmc instruction is faster than the equivelant rdmsr call, so use it when possible in the kernel. The perfctr kernel patches did this, after extensive testing showed rdpmc to always be faster (One can look in etc/costs in the perfctr-2.6 package to see a historical list of the overhead). I have done some tests on a 3.2 kernel, the kernel module I used was included in the first posting of this patch: rdmsr rdpmc Core2 T9900: 203.9 cycles 30.9 cycles AMD fam0fh: 56.2 cycles 9.8 cycles Atom 6/28/2: 129.7 cycles 50.6 cycles The speedup of using rdpmc is large. [ It's probably possible (and desirable) to do this without requiring a new field in the hw_perf_event structure, but the fixed events make this tricky. ] Signed-off-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1203011724030.26934@cl320.eecs.utk.edu Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 45db49f64bb4..1ce887abcc5c 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -677,6 +677,7 @@ struct hw_perf_event { u64 last_tag; unsigned long config_base; unsigned long event_base; + int event_base_rdpmc; int idx; int last_cpu; -- cgit v1.2.3 From ccaf8c32d5ed08bfb4c45492f8f1c145fd45f4e8 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 31 May 2012 22:38:22 +0200 Subject: ssb: recognize ARM Cortex M3 I found this core on a BCM4322, a PCI card in the Linksys WRT610N V1. This core is not used by the driver, this patch just makes ssb show the correct name. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index bc14bd738ade..bb674c02f306 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -243,6 +243,7 @@ struct ssb_bus_ops { #define SSB_DEV_MINI_MACPHY 0x823 #define SSB_DEV_ARM_1176 0x824 #define SSB_DEV_ARM_7TDMI 0x825 +#define SSB_DEV_ARM_CM3 0x82A /* Vendor-ID values */ #define SSB_VENDOR_BROADCOM 0x4243 -- cgit v1.2.3 From ebf348fcd088e3ffc6e76f6f349e27d30604865b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Jun 2012 12:50:54 +0200 Subject: cfg80211: validate remain-on-channel time better The remain-on-channel time validation shouldn't depend on the value of HZ, as it does now with the check against jiffies, since then you might use a value that works on one system but not on another. Fix it by checking against a minimum that's fixed. Also add validation of the wait duration for a management frame TX since this also translates into remain-on-channel internally. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 85e5037a218d..970afdf5a605 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1522,6 +1522,8 @@ enum nl80211_attrs { #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 + /** * enum nl80211_iftype - (virtual) interface types * -- cgit v1.2.3 From 6be96a5c905178637ec06a5d456a76b2b304fca3 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 6 Jun 2012 19:12:30 -0700 Subject: cgroup: remove hierarchy_mutex It was introduced for memcg to iterate cgroup hierarchy without holding cgroup_mutex, but soon after that it was replaced with a lockless way in memcg. No one used hierarchy_mutex since that, so remove it. Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- include/linux/cgroup.h | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index d3f5fba2c159..c90eaa803440 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -499,22 +499,9 @@ struct cgroup_subsys { #define MAX_CGROUP_TYPE_NAMELEN 32 const char *name; - /* - * Protects sibling/children links of cgroups in this - * hierarchy, plus protects which hierarchy (or none) the - * subsystem is a part of (i.e. root/sibling). To avoid - * potential deadlocks, the following operations should not be - * undertaken while holding any hierarchy_mutex: - * - * - allocating memory - * - initiating hotplug events - */ - struct mutex hierarchy_mutex; - struct lock_class_key subsys_key; - /* * Link to parent, and list entry in parent's children. - * Protected by this->hierarchy_mutex and cgroup_lock() + * Protected by cgroup_lock() */ struct cgroupfs_root *root; struct list_head sibling; @@ -602,7 +589,7 @@ int cgroup_attach_task_all(struct task_struct *from, struct task_struct *); * the lifetime of cgroup_subsys_state is subsys's matter. * * Looking up and scanning function should be called under rcu_read_lock(). - * Taking cgroup_mutex()/hierarchy_mutex() is not necessary for following calls. + * Taking cgroup_mutex is not necessary for following calls. * But the css returned by this routine can be "not populated yet" or "being * destroyed". The caller should check css and cgroup's status. */ -- cgit v1.2.3 From 24214449b00b94328e239d3c35cda3e6fe0f931b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 4 May 2012 18:28:21 +0200 Subject: x86, amd_nb: Export model 0x10 and later PCI id Add the F3 PCI id of F15h, model 0x10 to pci_ids.h and to the amd_nb code which generates the list of northbridges on an AMD box. Shorten define name while at it so that it fits into pci_ids.h. Acked-by: Clemens Ladisch Cc: Bjorn Helgaas Acked-by: Andreas Herrmann Signed-off-by: Borislav Petkov --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ab741b0d0074..05fd02e44993 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -517,6 +517,7 @@ #define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 +#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403 #define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600 #define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 #define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 -- cgit v1.2.3 From 7a74c1a18d1f03462f9f766ee8213535ce131b0f Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Sat, 19 May 2012 04:39:00 +0000 Subject: netfilter: remove include/linux/netfilter_ipv4/ipt_addrtype.h It was scheduled to be removed. Acked-by: Florian Westphal Signed-off-by: Cong Wang Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv4/Kbuild | 1 - include/linux/netfilter_ipv4/ipt_addrtype.h | 27 --------------------------- 2 files changed, 28 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_addrtype.h (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index c61b8fb1a9ef..8ba0c5b72ea9 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -5,7 +5,6 @@ header-y += ipt_LOG.h header-y += ipt_REJECT.h header-y += ipt_TTL.h header-y += ipt_ULOG.h -header-y += ipt_addrtype.h header-y += ipt_ah.h header-y += ipt_ecn.h header-y += ipt_ttl.h diff --git a/include/linux/netfilter_ipv4/ipt_addrtype.h b/include/linux/netfilter_ipv4/ipt_addrtype.h deleted file mode 100644 index 0da42237c8da..000000000000 --- a/include/linux/netfilter_ipv4/ipt_addrtype.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _IPT_ADDRTYPE_H -#define _IPT_ADDRTYPE_H - -#include - -enum { - IPT_ADDRTYPE_INVERT_SOURCE = 0x0001, - IPT_ADDRTYPE_INVERT_DEST = 0x0002, - IPT_ADDRTYPE_LIMIT_IFACE_IN = 0x0004, - IPT_ADDRTYPE_LIMIT_IFACE_OUT = 0x0008, -}; - -struct ipt_addrtype_info_v1 { - __u16 source; /* source-type mask */ - __u16 dest; /* dest-type mask */ - __u32 flags; -}; - -/* revision 0 */ -struct ipt_addrtype_info { - __u16 source; /* source-type mask */ - __u16 dest; /* dest-type mask */ - __u32 invert_source; - __u32 invert_dest; -}; - -#endif -- cgit v1.2.3 From 68c07cb6d8aa05daf38ab47d5bb674d81a2066fb Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Sat, 19 May 2012 04:39:01 +0000 Subject: netfilter: xt_connlimit: remove revision 0 It was scheduled to be removed. Cc: Jan Engelhardt Signed-off-by: Cong Wang Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/xt_connlimit.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_connlimit.h b/include/linux/netfilter/xt_connlimit.h index d1366f05d1b2..f1656096121e 100644 --- a/include/linux/netfilter/xt_connlimit.h +++ b/include/linux/netfilter/xt_connlimit.h @@ -22,13 +22,8 @@ struct xt_connlimit_info { #endif }; unsigned int limit; - union { - /* revision 0 */ - unsigned int inverse; - - /* revision 1 */ - __u32 flags; - }; + /* revision 1 */ + __u32 flags; /* Used internally by the kernel */ struct xt_connlimit_data *data __attribute__((aligned(8))); -- cgit v1.2.3 From fdb694a01f1fcd30fd16d8aa290c34699fe98a17 Mon Sep 17 00:00:00 2001 From: Krishna Kumar Date: Thu, 24 May 2012 03:56:44 +0000 Subject: netfilter: Add fail-open support Implement a new "fail-open" mode where packets are not dropped upon queue-full condition. This mode can be enabled/disabled per queue using netlink NFQA_CFG_FLAGS & NFQA_CFG_MASK attributes. Signed-off-by: Krishna Kumar Signed-off-by: Vivek Kashyap Signed-off-by: Sridhar Samudrala --- include/linux/netfilter/nfnetlink_queue.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_queue.h b/include/linux/netfilter/nfnetlink_queue.h index 24b32e6c009e..a6c1ddac05cc 100644 --- a/include/linux/netfilter/nfnetlink_queue.h +++ b/include/linux/netfilter/nfnetlink_queue.h @@ -84,8 +84,13 @@ enum nfqnl_attr_config { NFQA_CFG_CMD, /* nfqnl_msg_config_cmd */ NFQA_CFG_PARAMS, /* nfqnl_msg_config_params */ NFQA_CFG_QUEUE_MAXLEN, /* __u32 */ + NFQA_CFG_MASK, /* identify which flags to change */ + NFQA_CFG_FLAGS, /* value of these flags (__u32) */ __NFQA_CFG_MAX }; #define NFQA_CFG_MAX (__NFQA_CFG_MAX-1) +/* Flags for NFQA_CFG_FLAGS */ +#define NFQA_CFG_F_FAIL_OPEN (1 << 0) + #endif /* _NFNETLINK_QUEUE_H */ -- cgit v1.2.3 From efdedd5426a94b00d23483a1bcb4af3a91c894db Mon Sep 17 00:00:00 2001 From: Denys Fedoryshchenko Date: Thu, 17 May 2012 23:08:57 +0300 Subject: netfilter: xt_recent: add address masking option The mask option allows you put all address belonging that mask into the same recent slot. This can be useful in case that recent is used to detect attacks from the same network segment. Tested for backward compatibility. Signed-off-by: Denys Fedoryshchenko Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter.h | 10 ++++++++++ include/linux/netfilter/xt_recent.h | 10 ++++++++++ 2 files changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index ff9c84c29b28..4541f33dbfc3 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -94,6 +94,16 @@ static inline int nf_inet_addr_cmp(const union nf_inet_addr *a1, a1->all[3] == a2->all[3]; } +static inline void nf_inet_addr_mask(const union nf_inet_addr *a1, + union nf_inet_addr *result, + const union nf_inet_addr *mask) +{ + result->all[0] = a1->all[0] & mask->all[0]; + result->all[1] = a1->all[1] & mask->all[1]; + result->all[2] = a1->all[2] & mask->all[2]; + result->all[3] = a1->all[3] & mask->all[3]; +} + extern void netfilter_init(void); /* Largest hook number + 1 */ diff --git a/include/linux/netfilter/xt_recent.h b/include/linux/netfilter/xt_recent.h index 83318e01425e..6ef36c113e89 100644 --- a/include/linux/netfilter/xt_recent.h +++ b/include/linux/netfilter/xt_recent.h @@ -32,4 +32,14 @@ struct xt_recent_mtinfo { __u8 side; }; +struct xt_recent_mtinfo_v1 { + __u32 seconds; + __u32 hit_count; + __u8 check_set; + __u8 invert; + char name[XT_RECENT_NAME_LEN]; + __u8 side; + union nf_inet_addr mask; +}; + #endif /* _LINUX_NETFILTER_XT_RECENT_H */ -- cgit v1.2.3 From 80f12eccce775dc6bb93dba9b52529740f929237 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 6 Jun 2012 17:13:06 +0000 Subject: Added kernel support in EEE Ethtool commands This patch extends the kernel's ethtool interface by adding support for 2 new EEE commands - get_eee and set_eee. Thanks goes to Giuseppe Cavallaro for his original patch adding this support. Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index e17fa7140588..297370a6cb18 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -136,6 +136,35 @@ struct ethtool_eeprom { __u8 data[0]; }; +/** + * struct ethtool_eee - Energy Efficient Ethernet information + * @cmd: ETHTOOL_{G,S}EEE + * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations + * for which there is EEE support. + * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations + * advertised as eee capable. + * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex + * combinations advertised by the link partner as eee capable. + * @eee_active: Result of the eee auto negotiation. + * @eee_enabled: EEE configured mode (enabled/disabled). + * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given + * that eee was negotiated. + * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting + * its tx lpi (after reaching 'idle' state). Effective only when eee + * was negotiated and tx_lpi_enabled was set. + */ +struct ethtool_eee { + __u32 cmd; + __u32 supported; + __u32 advertised; + __u32 lp_advertised; + __u32 eee_active; + __u32 eee_enabled; + __u32 tx_lpi_enabled; + __u32 tx_lpi_timer; + __u32 reserved[2]; +}; + /** * struct ethtool_modinfo - plugin module eeprom information * @cmd: %ETHTOOL_GMODULEINFO @@ -945,6 +974,8 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings) * @get_module_info: Get the size and type of the eeprom contained within * a plug-in module. * @get_module_eeprom: Get the eeprom information from the plug-in module + * @get_eee: Get Energy-Efficient (EEE) supported and status. + * @set_eee: Set EEE status (enable/disable) as well as LPI timers. * * All operations are optional (i.e. the function pointer may be set * to %NULL) and callers must take this into account. Callers must @@ -1011,6 +1042,8 @@ struct ethtool_ops { struct ethtool_modinfo *); int (*get_module_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); + int (*get_eee)(struct net_device *, struct ethtool_eee *); + int (*set_eee)(struct net_device *, struct ethtool_eee *); }; @@ -1089,6 +1122,8 @@ struct ethtool_ops { #define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ #define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ #define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ +#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ +#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET -- cgit v1.2.3 From 4fd1e324b7b5f80bd521b58593ada74ef89e80c4 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 6 Jun 2012 10:55:26 +0530 Subject: dma: dmaengine: add slave req id in slave_config The DMA controller like Nvidia's Tegra Dma controller supports the different slave requestor id from different slave. This need to be configure in dma controller to handle the request properly. Adding the slave-id in the slave configuration so that information can be passed from client when configuring for slave. Signed-off-by: Laxman Dewangan Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 56377df39124..ccec62f8e501 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -338,6 +338,9 @@ enum dma_slave_buswidth { * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill * with 'true' if peripheral should be flow controller. Direction will be * selected at Runtime. + * @slave_id: Slave requester id. Only valid for slave channels. The dma + * slave peripheral will have unique id as dma requester which need to be + * pass as slave config. * * This struct is passed in as configuration data to a DMA engine * in order to set up a certain channel for DMA transport at runtime. @@ -365,6 +368,7 @@ struct dma_slave_config { u32 src_maxburst; u32 dst_maxburst; bool device_fc; + unsigned int slave_id; }; static inline const char *dma_chan_name(struct dma_chan *chan) -- cgit v1.2.3 From 6f5cf52114dd87f9ed091678f7dfc8ff21bbe2b3 Mon Sep 17 00:00:00 2001 From: Donald Dutile Date: Mon, 4 Jun 2012 17:29:02 -0400 Subject: iommu/dmar: Reserve mmio space used by the IOMMU, if the BIOS forgets to Intel-iommu initialization doesn't currently reserve the memory used for the IOMMU registers. This can allow the pci resource allocator to assign a device BAR to the same address as the IOMMU registers. This can cause some not so nice side affects when the driver ioremap's that region. Introduced two helper functions to map & unmap the IOMMU registers as well as simplify the init and exit paths. Signed-off-by: Donald Dutile Acked-by: Chris Wright Cc: iommu@lists.linux-foundation.org Cc: suresh.b.siddha@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1338845342-12464-3-git-send-email-ddutile@redhat.com Signed-off-by: Ingo Molnar --- include/linux/intel-iommu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index e6ca56de9936..78e2ada50cd5 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -308,6 +308,8 @@ enum { struct intel_iommu { void __iomem *reg; /* Pointer to hardware regs, virtual addr */ + u64 reg_phys; /* physical address of hw register set */ + u64 reg_size; /* size of hw register set */ u64 cap; u64 ecap; u32 gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */ -- cgit v1.2.3 From 90306c41dc3d8e5f12ecd0193dae99e0e7f6e896 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Tue, 29 May 2012 23:01:09 -0500 Subject: GFS2: Use lvbs for storing rgrp information with mount option Instead of reading in the resource groups when gfs2 is checking for free space to allocate from, gfs2 can store the necessary infromation in the resource group's lvb. Also, instead of searching for unlinked inodes in every resource group that's checked for free space, gfs2 can store the number of unlinked but inodes in the lvb, and only check for unlinked inodes if it will find some. The first time a resource group is locked, the lvb must initialized. Since this involves counting the unlinked inodes in the resource group, this takes a little extra time. But after that, if the resource group is locked with GL_SKIP, the buffer head won't be read in unless it's actually needed. Enabling the resource groups lvbs is done via the rgrplvb mount option. If this option isn't set, the lvbs will still be set and updated, but they won't be verfied or used by the filesystem. To safely turn on this option, all of the nodes mounting the filesystem must be running code with this patch, and the filesystem must have been completely unmounted since they were updated. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse --- include/linux/gfs2_ondisk.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index e8ccf6ff3b4d..b2de1f9a88d6 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -170,6 +170,16 @@ struct gfs2_rindex { #define GFS2_RGF_NOALLOC 0x00000008 #define GFS2_RGF_TRIMMED 0x00000010 +struct gfs2_rgrp_lvb { + __be32 rl_magic; + __be32 rl_flags; + __be32 rl_free; + __be32 rl_dinodes; + __be64 rl_igeneration; + __be32 rl_unlinked; + __be32 __pad; +}; + struct gfs2_rgrp { struct gfs2_meta_header rg_header; -- cgit v1.2.3 From f3109a51f8dc88e8a94f620240b7474b91bed37a Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 24 May 2012 18:59:10 +0200 Subject: lib: Proportions with flexible period Implement code computing proportions of events of different type (like code in lib/proportions.c) but allowing periods to have different lengths. This allows us to have aging periods of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices - previous measuring of aging period by number of events has the problem that a reasonable period length for a system with low-end USB stick is not a reasonable period length for a system with high-end storage array resulting either in too slow proportion updates or too fluctuating proportion updates. Acked-by: Peter Zijlstra Signed-off-by: Jan Kara Signed-off-by: Fengguang Wu --- include/linux/flex_proportions.h | 101 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 include/linux/flex_proportions.h (limited to 'include/linux') diff --git a/include/linux/flex_proportions.h b/include/linux/flex_proportions.h new file mode 100644 index 000000000000..4ebc49fae391 --- /dev/null +++ b/include/linux/flex_proportions.h @@ -0,0 +1,101 @@ +/* + * Floating proportions with flexible aging period + * + * Copyright (C) 2011, SUSE, Jan Kara + */ + +#ifndef _LINUX_FLEX_PROPORTIONS_H +#define _LINUX_FLEX_PROPORTIONS_H + +#include +#include +#include + +/* + * When maximum proportion of some event type is specified, this is the + * precision with which we allow limitting. Note that this creates an upper + * bound on the number of events per period like + * ULLONG_MAX >> FPROP_FRAC_SHIFT. + */ +#define FPROP_FRAC_SHIFT 10 +#define FPROP_FRAC_BASE (1UL << FPROP_FRAC_SHIFT) + +/* + * ---- Global proportion definitions ---- + */ +struct fprop_global { + /* Number of events in the current period */ + struct percpu_counter events; + /* Current period */ + unsigned int period; + /* Synchronization with period transitions */ + seqcount_t sequence; +}; + +int fprop_global_init(struct fprop_global *p); +void fprop_global_destroy(struct fprop_global *p); +bool fprop_new_period(struct fprop_global *p, int periods); + +/* + * ---- SINGLE ---- + */ +struct fprop_local_single { + /* the local events counter */ + unsigned long events; + /* Period in which we last updated events */ + unsigned int period; + raw_spinlock_t lock; /* Protect period and numerator */ +}; + +#define INIT_FPROP_LOCAL_SINGLE(name) \ +{ .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \ +} + +int fprop_local_init_single(struct fprop_local_single *pl); +void fprop_local_destroy_single(struct fprop_local_single *pl); +void __fprop_inc_single(struct fprop_global *p, struct fprop_local_single *pl); +void fprop_fraction_single(struct fprop_global *p, + struct fprop_local_single *pl, unsigned long *numerator, + unsigned long *denominator); + +static inline +void fprop_inc_single(struct fprop_global *p, struct fprop_local_single *pl) +{ + unsigned long flags; + + local_irq_save(flags); + __fprop_inc_single(p, pl); + local_irq_restore(flags); +} + +/* + * ---- PERCPU ---- + */ +struct fprop_local_percpu { + /* the local events counter */ + struct percpu_counter events; + /* Period in which we last updated events */ + unsigned int period; + raw_spinlock_t lock; /* Protect period and numerator */ +}; + +int fprop_local_init_percpu(struct fprop_local_percpu *pl); +void fprop_local_destroy_percpu(struct fprop_local_percpu *pl); +void __fprop_inc_percpu(struct fprop_global *p, struct fprop_local_percpu *pl); +void __fprop_inc_percpu_max(struct fprop_global *p, struct fprop_local_percpu *pl, + int max_frac); +void fprop_fraction_percpu(struct fprop_global *p, + struct fprop_local_percpu *pl, unsigned long *numerator, + unsigned long *denominator); + +static inline +void fprop_inc_percpu(struct fprop_global *p, struct fprop_local_percpu *pl) +{ + unsigned long flags; + + local_irq_save(flags); + __fprop_inc_percpu(p, pl); + local_irq_restore(flags); +} + +#endif -- cgit v1.2.3 From eb608e3a344b3af21300360fcf868f8b4e808a8e Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 24 May 2012 18:59:11 +0200 Subject: block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra Signed-off-by: Jan Kara Signed-off-by: Fengguang Wu --- include/linux/backing-dev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index b1038bd686ac..489de625cd25 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -10,7 +10,7 @@ #include #include -#include +#include #include #include #include @@ -89,7 +89,7 @@ struct backing_dev_info { unsigned long dirty_ratelimit; unsigned long balanced_dirty_ratelimit; - struct prop_local_percpu completions; + struct fprop_local_percpu completions; int dirty_exceeded; unsigned int min_ratio; -- cgit v1.2.3 From 2397849baa7c44c242e5d5142d5d16d1e7ed53d0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 9 Jun 2012 14:56:12 -0700 Subject: [PATCH] tcp: Cache inetpeer in timewait socket, and only when necessary. Since it's guarenteed that we will access the inetpeer if we're trying to do timewait recycling and TCP options were enabled on the connection, just cache the peer in the timewait socket. In the future, inetpeer lookups will be context dependent (per routing realm), and this helps facilitate that as well. Signed-off-by: David S. Miller --- include/linux/tcp.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 4c5b63283377..23e8234f75a5 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -506,8 +506,9 @@ struct tcp_timewait_sock { u32 tw_rcv_wnd; u32 tw_ts_recent; long tw_ts_recent_stamp; + struct inet_peer *tw_peer; #ifdef CONFIG_TCP_MD5SIG - struct tcp_md5sig_key *tw_md5_key; + struct tcp_md5sig_key *tw_md5_key; #endif /* Few sockets in timewait have cookies; in that case, then this * object holds a reference to them (tw_cookie_values->kref). -- cgit v1.2.3 From 4a31bd28e86ac50eb620f6b5b36464c45b5fa38f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 11 Jan 2012 13:52:34 +0100 Subject: ARM: nomadik: convert to generic clock Remove more custom stuff by simply converting the Nomadik machine to use generic clocks and move the driver to drivers/clk. Acked-by: Arnd Bergmann Cc: Mike Turquette Signed-off-by: Linus Walleij --- include/linux/platform_data/clk-nomadik.h | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 include/linux/platform_data/clk-nomadik.h (limited to 'include/linux') diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h new file mode 100644 index 000000000000..5713c87b2477 --- /dev/null +++ b/include/linux/platform_data/clk-nomadik.h @@ -0,0 +1,2 @@ +/* Minimal platform data header */ +void nomadik_clk_init(void); -- cgit v1.2.3 From 98a175b60f46a80dfa44fb0e0807f2e5a351f35f Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Sat, 9 Jun 2012 16:40:38 +0530 Subject: regulator: core: Add regulator_set_voltage_time_sel to calculate ramp delay. This patch adds regulator_set_voltage_time_sel(), to move into core, the commonly used code by drivers to provide the .set_voltage_time_sel callback. It will also allow us to configure different ramp delay for different regulators easily. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 80226383e561..ae5c25379237 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -170,6 +170,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @ramp_delay: Time to settle down after voltage change (unit: mV/us) * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ @@ -189,6 +190,7 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + unsigned int ramp_delay; const unsigned int *volt_table; @@ -285,6 +287,9 @@ int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel); int regulator_is_enabled_regmap(struct regulator_dev *rdev); int regulator_enable_regmap(struct regulator_dev *rdev); int regulator_disable_regmap(struct regulator_dev *rdev); +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); -- cgit v1.2.3 From a4f606ea73d56d15f28653d2242e54d58bb612e5 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Mon, 11 Jun 2012 11:59:36 +0800 Subject: {nl,cfg,mac}80211: fix the coding style related to mesh parameters fix the coding style related to mesh parameters, especially the indentation, as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 6 +-- include/linux/nl80211.h | 98 ++++++++++++++++++++++++----------------------- 2 files changed, 54 insertions(+), 50 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce9af8918514..f831078182de 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1443,7 +1443,7 @@ enum ieee80211_tdls_actioncode { * * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method - * that will be specified in a vendor specific information element + * that will be specified in a vendor specific information element */ enum { IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, @@ -1455,7 +1455,7 @@ enum { * * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will - * be specified in a vendor specific information element + * be specified in a vendor specific information element */ enum { IEEE80211_PATH_PROTOCOL_HWMP = 1, @@ -1467,7 +1467,7 @@ enum { * * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be - * specified in a vendor specific information element + * specified in a vendor specific information element */ enum { IEEE80211_PATH_METRIC_AIRTIME = 1, diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 970afdf5a605..c61e1621822c 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2090,78 +2090,80 @@ enum nl80211_mntr_flags { * @__NL80211_MESHCONF_INVALID: internal use * * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message + * millisecond units, used by the Peer Link Open message * * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link + * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units + * millisecond units * * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface + * on this mesh interface * * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh + * open retries that can be sent to establish a new peer link instance in a + * mesh * * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. + * point. * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * open peer links when we detect compatible mesh peers. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) + * containing a PREQ that an MP can send to a particular destination (path + * target) * * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) + * (in milliseconds) * * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) + * until giving up on a path discovery (in milliseconds) * * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) * * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element * * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh + * that it takes for an HWMP information element to propagate across the + * mesh * * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not * * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. + * source mesh point for path selection elements. * * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. + * root announcements are transmitted. * * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. * * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. * * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) + * or forwarding entity (default is TRUE - forwarding entity) * * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the - * threshold for average signal strength of candidate station to establish - * a peer link. - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * threshold for average signal strength of candidate station to establish + * a peer link. * * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors - * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) * * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2203,34 +2205,36 @@ enum nl80211_meshconf_params { * @__NL80211_MESH_SETUP_INVALID: Internal use * * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. + * vendor specific path selection algorithm or disable it to use the + * default HWMP. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. + * vendor specific path metric or disable it to use the default Airtime + * metric. * * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. * * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a - * vendor specific synchronization method or disable it to use the default - * neighbor offset synchronization + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ -- cgit v1.2.3 From a4808147dcf1ecf2f76212a78fd9692b3c112f47 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 11 Jun 2012 13:16:35 +0100 Subject: seq_file: Add seq_vprintf function and export it The existing seq_printf function is rewritten in terms of the new seq_vprintf which is also exported to modules. This allows GFS2 (and potentially other seq_file users) to have a vprintf based interface and to avoid an extra copy into a temporary buffer in some cases. Signed-off-by: Steven Whitehouse Reported-by: Eric Dumazet Acked-by: Al Viro --- include/linux/seq_file.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index fc61854f6224..83c44eefe698 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -86,6 +86,7 @@ int seq_puts(struct seq_file *m, const char *s); int seq_write(struct seq_file *seq, const void *data, size_t len); __printf(2, 3) int seq_printf(struct seq_file *, const char *, ...); +__printf(2, 0) int seq_vprintf(struct seq_file *, const char *, va_list args); int seq_path(struct seq_file *, const struct path *, const char *); int seq_dentry(struct seq_file *, struct dentry *, const char *); -- cgit v1.2.3 From fd687502dc8037aa5a4b84c570ada971106574ee Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 16 Mar 2012 07:44:18 -0300 Subject: edac: Rename the parent dev to pdev MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As EDAC doesn't use struct device itself, it created a parent dev pointer called as "pdev". Now that we'll be converting it to use struct device, instead of struct devsys, this needs to be fixed. No functional changes. Reviewed-by: Aristeu Rozanski Acked-by: Chris Metcalf Cc: Doug Thompson Cc: Borislav Petkov Cc: Mark Gross Cc: Jason Uhlenkott Cc: Tim Small Cc: Ranganathan Desikan Cc: "Arvind R." Cc: Olof Johansson Cc: Egor Martovetsky Cc: Michal Marek Cc: Jiri Kosina Cc: Joe Perches Cc: Dmitry Eremin-Solenikov Cc: Benjamin Herrenschmidt Cc: Hitoshi Mitake Cc: Andrew Morton Cc: "Niklas Söderlund" Cc: Shaohui Xie Cc: Josh Boyer Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index 91ba3bae42ee..ec1b5278b4cc 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -567,7 +567,7 @@ struct mem_ctl_info { * unique. dev pointer should be sufficiently unique, but * BUS:SLOT.FUNC numbers may not be unique. */ - struct device *dev; + struct device *pdev; const char *mod_name; const char *mod_ver; const char *ctl_name; -- cgit v1.2.3 From b0610bb82abd1c4ac97c33f0312cd7fd72eaa325 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 21 Mar 2012 16:21:07 -0300 Subject: edac: use Documentation-nano format for some data structs No functional changes. Just comment improvements. Reviewed-by: Aristeu Rozanski Cc: Doug Thompson Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 82 +++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 59 insertions(+), 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index ec1b5278b4cc..4e32e8d31e0a 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -49,7 +49,19 @@ static inline void opstate_init(void) #define EDAC_MC_LABEL_LEN 31 #define MC_PROC_NAME_MAX_LEN 7 -/* memory devices */ +/** + * enum dev_type - describe the type of memory DRAM chips used at the stick + * @DEV_UNKNOWN: Can't be determined, or MC doesn't support detect it + * @DEV_X1: 1 bit for data + * @DEV_X2: 2 bits for data + * @DEV_X4: 4 bits for data + * @DEV_X8: 8 bits for data + * @DEV_X16: 16 bits for data + * @DEV_X32: 32 bits for data + * @DEV_X64: 64 bits for data + * + * Typical values are x4 and x8. + */ enum dev_type { DEV_UNKNOWN = 0, DEV_X1, @@ -167,18 +179,30 @@ enum mem_type { #define MEM_FLAG_DDR3 BIT(MEM_DDR3) #define MEM_FLAG_RDDR3 BIT(MEM_RDDR3) -/* chipset Error Detection and Correction capabilities and mode */ +/** + * enum edac-type - Error Detection and Correction capabilities and mode + * @EDAC_UNKNOWN: Unknown if ECC is available + * @EDAC_NONE: Doesn't support ECC + * @EDAC_RESERVED: Reserved ECC type + * @EDAC_PARITY: Detects parity errors + * @EDAC_EC: Error Checking - no correction + * @EDAC_SECDED: Single bit error correction, Double detection + * @EDAC_S2ECD2ED: Chipkill x2 devices - do these exist? + * @EDAC_S4ECD4ED: Chipkill x4 devices + * @EDAC_S8ECD8ED: Chipkill x8 devices + * @EDAC_S16ECD16ED: Chipkill x16 devices + */ enum edac_type { - EDAC_UNKNOWN = 0, /* Unknown if ECC is available */ - EDAC_NONE, /* Doesn't support ECC */ - EDAC_RESERVED, /* Reserved ECC type */ - EDAC_PARITY, /* Detects parity errors */ - EDAC_EC, /* Error Checking - no correction */ - EDAC_SECDED, /* Single bit error correction, Double detection */ - EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */ - EDAC_S4ECD4ED, /* Chipkill x4 devices */ - EDAC_S8ECD8ED, /* Chipkill x8 devices */ - EDAC_S16ECD16ED, /* Chipkill x16 devices */ + EDAC_UNKNOWN = 0, + EDAC_NONE, + EDAC_RESERVED, + EDAC_PARITY, + EDAC_EC, + EDAC_SECDED, + EDAC_S2ECD2ED, + EDAC_S4ECD4ED, + EDAC_S8ECD8ED, + EDAC_S16ECD16ED, }; #define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN) @@ -191,18 +215,30 @@ enum edac_type { #define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED) #define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED) -/* scrubbing capabilities */ +/** + * enum scrub_type - scrubbing capabilities + * @SCRUB_UNKNOWN Unknown if scrubber is available + * @SCRUB_NONE: No scrubber + * @SCRUB_SW_PROG: SW progressive (sequential) scrubbing + * @SCRUB_SW_SRC: Software scrub only errors + * @SCRUB_SW_PROG_SRC: Progressive software scrub from an error + * @SCRUB_SW_TUNABLE: Software scrub frequency is tunable + * @SCRUB_HW_PROG: HW progressive (sequential) scrubbing + * @SCRUB_HW_SRC: Hardware scrub only errors + * @SCRUB_HW_PROG_SRC: Progressive hardware scrub from an error + * SCRUB_HW_TUNABLE: Hardware scrub frequency is tunable + */ enum scrub_type { - SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */ - SCRUB_NONE, /* No scrubber */ - SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */ - SCRUB_SW_SRC, /* Software scrub only errors */ - SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */ - SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */ - SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */ - SCRUB_HW_SRC, /* Hardware scrub only errors */ - SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */ - SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */ + SCRUB_UNKNOWN = 0, + SCRUB_NONE, + SCRUB_SW_PROG, + SCRUB_SW_SRC, + SCRUB_SW_PROG_SRC, + SCRUB_SW_TUNABLE, + SCRUB_HW_PROG, + SCRUB_HW_SRC, + SCRUB_HW_PROG_SRC, + SCRUB_HW_TUNABLE }; #define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG) -- cgit v1.2.3 From 7a623c039075e4ea21648d88133fafa6dcfd113d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 16 Apr 2012 16:41:11 -0300 Subject: edac: rewrite the sysfs code to use struct device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [] sysfs_add_one+0xc1/0xf0 [ 819.206025] [] sysfs_do_create_link+0x135/0x220 [ 819.212944] [] ? sysfs_create_group+0x13/0x20 [ 819.219656] [] sysfs_create_link+0x13/0x20 [ 819.226109] [] bus_add_device+0xe6/0x1b0 [ 819.232350] [] device_add+0x2db/0x460 [ 819.238300] [] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [] local_pci_probe+0x5c/0xd0 [ 819.290508] [] __pci_device_probe+0xf1/0x100 [ 819.297117] [] pci_device_probe+0x3a/0x60 [ 819.303457] [] really_probe+0x73/0x270 [ 819.309496] [] driver_probe_device+0x4e/0xb0 [ 819.316104] [] __driver_attach+0xab/0xb0 [ 819.322337] [] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [] bus_for_each_dev+0x56/0x90 [ 819.335489] [] driver_attach+0x1e/0x20 [ 819.341534] [] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [] ? 0xffffffffa0346fff [ 819.353641] [] driver_register+0x76/0x140 [ 819.359980] [] ? printk+0x51/0x53 [ 819.365524] [] ? 0xffffffffa0346fff [ 819.371291] [] __pci_register_driver+0x56/0xd0 [ 819.378096] [] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [] do_one_initcall+0x3f/0x170 [ 819.391577] [] sys_init_module+0xbe/0x230 [ 819.397926] [] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski Cc: Doug Thompson Cc: Greg K H Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 47 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 33 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index 4e32e8d31e0a..a2b0b6fc002c 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -13,6 +13,7 @@ #define _LINUX_EDAC_H_ #include +#include #include #include #include @@ -448,14 +449,15 @@ struct edac_mc_layer { __p; \ }) - -/* FIXME: add the proper per-location error counts */ struct dimm_info { + struct device dev; + char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ /* Memory location data */ unsigned location[EDAC_MAX_LAYERS]; + struct kobject kobj; /* sysfs kobject for this csrow */ struct mem_ctl_info *mci; /* the parent */ u32 grain; /* granularity of reported error in bytes */ @@ -484,6 +486,8 @@ struct dimm_info { * patches in this series will fix this issue. */ struct rank_info { + struct device dev; + int chan_idx; struct csrow_info *csrow; struct dimm_info *dimm; @@ -492,6 +496,8 @@ struct rank_info { }; struct csrow_info { + struct device dev; + /* Used only by edac_mc_find_csrow_by_page() */ unsigned long first_page; /* first page number in csrow */ unsigned long last_page; /* last page number in csrow */ @@ -517,15 +523,6 @@ struct mcidev_sysfs_group { const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */ }; -struct mcidev_sysfs_group_kobj { - struct list_head list; /* list for all instances within a mc */ - - struct kobject kobj; /* kobj for the group */ - - const struct mcidev_sysfs_group *grp; /* group description table */ - struct mem_ctl_info *mci; /* the parent */ -}; - /* mcidev_sysfs_attribute structure * used for driver sysfs attributes and in mem_ctl_info * sysfs top level entries @@ -536,13 +533,27 @@ struct mcidev_sysfs_attribute { const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */ /* Ops for show/store values at the attribute - not used on group */ - ssize_t (*show)(struct mem_ctl_info *,char *); - ssize_t (*store)(struct mem_ctl_info *, const char *,size_t); + ssize_t (*show)(struct mem_ctl_info *, char *); + ssize_t (*store)(struct mem_ctl_info *, const char *, size_t); + + void *priv; +}; + +/* + * struct errcount_attribute - used to store the several error counts + */ +struct errcount_attribute_data { + int n_layers; + int pos[EDAC_MAX_LAYERS]; + int layer0, layer1, layer2; }; /* MEMORY controller information structure */ struct mem_ctl_info { + struct device dev; + struct bus_type bus; + struct list_head link; /* for global list of mem_ctl_info structs */ struct module *owner; /* Module owner of this control struct */ @@ -587,7 +598,15 @@ struct mem_ctl_info { struct csrow_info *csrows; unsigned nr_csrows, num_cschannel; - /* Memory Controller hierarchy */ + /* + * Memory Controller hierarchy + * + * There are basically two types of memory controller: the ones that + * sees memory sticks ("dimms"), and the ones that sees memory ranks. + * All old memory controllers enumerate memories per rank, but most + * of the recent drivers enumerate memories per DIMM, instead. + * When the memory controller is per rank, mem_is_per_rank is true. + */ unsigned n_layers; struct edac_mc_layer *layers; bool mem_is_per_rank; -- cgit v1.2.3 From d90c008963ef638cb7ab7d5eb76362b3c2d379bc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 21 Mar 2012 16:55:02 -0300 Subject: edac: Get rid of the old kobj's from the edac mc code Now that al users for the old kobj raw access are gone, we can get rid of the legacy kobj-based structures and data. Reviewed-by: Aristeu Rozanski Cc: Doug Thompson Cc: Michal Marek Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 30 ------------------------------ 1 file changed, 30 deletions(-) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index a2b0b6fc002c..8a2da47daa47 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -457,7 +457,6 @@ struct dimm_info { /* Memory location data */ unsigned location[EDAC_MAX_LAYERS]; - struct kobject kobj; /* sysfs kobject for this csrow */ struct mem_ctl_info *mci; /* the parent */ u32 grain; /* granularity of reported error in bytes */ @@ -511,34 +510,11 @@ struct csrow_info { struct mem_ctl_info *mci; /* the parent */ - struct kobject kobj; /* sysfs kobject for this csrow */ - /* channel information for this csrow */ u32 nr_channels; struct rank_info *channels; }; -struct mcidev_sysfs_group { - const char *name; /* group name */ - const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */ -}; - -/* mcidev_sysfs_attribute structure - * used for driver sysfs attributes and in mem_ctl_info - * sysfs top level entries - */ -struct mcidev_sysfs_attribute { - /* It should use either attr or grp */ - struct attribute attr; - const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */ - - /* Ops for show/store values at the attribute - not used on group */ - ssize_t (*show)(struct mem_ctl_info *, char *); - ssize_t (*store)(struct mem_ctl_info *, const char *, size_t); - - void *priv; -}; - /* * struct errcount_attribute - used to store the several error counts */ @@ -641,12 +617,6 @@ struct mem_ctl_info { struct completion complete; - /* edac sysfs device control */ - struct kobject edac_mci_kobj; - - /* list for all grp instances within a mc */ - struct list_head grp_kobj_list; - /* Additional top controller level attributes, but specified * by the low level driver. * -- cgit v1.2.3 From 452a6bf955ee1842361742833e40e046287308f4 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 26 Mar 2012 09:35:11 -0300 Subject: edac: Add debufs nodes to allow doing fake error inject Sometimes, it is useful to have a mechanism that generates fake errors, in order to test the EDAC core code, and the userspace tools. Provide such mechanism by adding a few debugfs nodes. Reviewed-by: Aristeu Rozanski Cc: Doug Thompson Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index 8a2da47daa47..64ae0c5cf62e 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -17,6 +17,7 @@ #include #include #include +#include struct device; @@ -634,6 +635,12 @@ struct mem_ctl_info { /* the internal state of this controller instance */ int op_state; + +#ifdef CONFIG_EDAC_DEBUG + struct dentry *debugfs; + u8 fake_inject_layer[EDAC_MAX_LAYERS]; + u32 fake_inject_ue; +#endif }; #endif -- cgit v1.2.3 From de3910eb79ac8c0f29a11224661c0ebaaf813039 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 24 Apr 2012 15:05:43 -0300 Subject: edac: change the mem allocation scheme to make Documentation/kobject.txt happy Kernel kobjects have rigid rules: each container object should be dynamically allocated, and can't be allocated into a single kmalloc. EDAC never obeyed this rule: it has a single malloc function that allocates all needed data into a single kzalloc. As this is not accepted anymore, change the allocation schema of the EDAC *_info structs to enforce this Kernel standard. Acked-by: Chris Metcalf Cc: Aristeu Rozanski Cc: Doug Thompson Cc: Greg K H Cc: Borislav Petkov Cc: Mark Gross Cc: Tim Small Cc: Ranganathan Desikan Cc: "Arvind R." Cc: Olof Johansson Cc: Egor Martovetsky Cc: Michal Marek Cc: Jiri Kosina Cc: Dmitry Eremin-Solenikov Cc: Benjamin Herrenschmidt Cc: Hitoshi Mitake Cc: Andrew Morton Cc: Shaohui Xie Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 59 +++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 42 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index 64ae0c5cf62e..6677af853e30 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -412,23 +412,21 @@ struct edac_mc_layer { #define EDAC_MAX_LAYERS 3 /** - * EDAC_DIMM_PTR - Macro responsible to find a pointer inside a pointer array + * EDAC_DIMM_OFF - Macro responsible to get a pointer offset inside a pointer array * for the element given by [layer0,layer1,layer2] position * * @layers: a struct edac_mc_layer array, describing how many elements * were allocated for each layer - * @var: name of the var where we want to get the pointer - * (like mci->dimms) * @n_layers: Number of layers at the @layers array * @layer0: layer0 position * @layer1: layer1 position. Unused if n_layers < 2 * @layer2: layer2 position. Unused if n_layers < 3 * - * For 1 layer, this macro returns &var[layer0] + * For 1 layer, this macro returns &var[layer0] - &var * For 2 layers, this macro is similar to allocate a bi-dimensional array - * and to return "&var[layer0][layer1]" + * and to return "&var[layer0][layer1] - &var" * For 3 layers, this macro is similar to allocate a tri-dimensional array - * and to return "&var[layer0][layer1][layer2]" + * and to return "&var[layer0][layer1][layer2] - &var" * * A loop could be used here to make it more generic, but, as we only have * 3 layers, this is a little faster. @@ -436,17 +434,46 @@ struct edac_mc_layer { * a NULL is returned, causing an OOPS during the memory allocation routine, * with would point to the developer that he's doing something wrong. */ -#define EDAC_DIMM_PTR(layers, var, nlayers, layer0, layer1, layer2) ({ \ - typeof(var) __p; \ +#define EDAC_DIMM_OFF(layers, nlayers, layer0, layer1, layer2) ({ \ + int __i; \ if ((nlayers) == 1) \ - __p = &var[layer0]; \ + __i = layer0; \ else if ((nlayers) == 2) \ - __p = &var[(layer1) + ((layers[1]).size * (layer0))]; \ + __i = (layer1) + ((layers[1]).size * (layer0)); \ else if ((nlayers) == 3) \ - __p = &var[(layer2) + ((layers[2]).size * ((layer1) + \ - ((layers[1]).size * (layer0))))]; \ + __i = (layer2) + ((layers[2]).size * ((layer1) + \ + ((layers[1]).size * (layer0)))); \ else \ + __i = -EINVAL; \ + __i; \ +}) + +/** + * EDAC_DIMM_PTR - Macro responsible to get a pointer inside a pointer array + * for the element given by [layer0,layer1,layer2] position + * + * @layers: a struct edac_mc_layer array, describing how many elements + * were allocated for each layer + * @var: name of the var where we want to get the pointer + * (like mci->dimms) + * @n_layers: Number of layers at the @layers array + * @layer0: layer0 position + * @layer1: layer1 position. Unused if n_layers < 2 + * @layer2: layer2 position. Unused if n_layers < 3 + * + * For 1 layer, this macro returns &var[layer0] + * For 2 layers, this macro is similar to allocate a bi-dimensional array + * and to return "&var[layer0][layer1]" + * For 3 layers, this macro is similar to allocate a tri-dimensional array + * and to return "&var[layer0][layer1][layer2]" + */ +#define EDAC_DIMM_PTR(layers, var, nlayers, layer0, layer1, layer2) ({ \ + typeof(*var) __p; \ + int ___i = EDAC_DIMM_OFF(layers, nlayers, layer0, layer1, layer2); \ + if (___i < 0) \ __p = NULL; \ + else \ + __p = (var)[___i]; \ __p; \ }) @@ -486,8 +513,6 @@ struct dimm_info { * patches in this series will fix this issue. */ struct rank_info { - struct device dev; - int chan_idx; struct csrow_info *csrow; struct dimm_info *dimm; @@ -513,7 +538,7 @@ struct csrow_info { /* channel information for this csrow */ u32 nr_channels; - struct rank_info *channels; + struct rank_info **channels; }; /* @@ -572,7 +597,7 @@ struct mem_ctl_info { unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci, unsigned long page); int mc_idx; - struct csrow_info *csrows; + struct csrow_info **csrows; unsigned nr_csrows, num_cschannel; /* @@ -592,7 +617,7 @@ struct mem_ctl_info { * DIMM info. Will eventually remove the entire csrows_info some day */ unsigned tot_dimms; - struct dimm_info *dimms; + struct dimm_info **dimms; /* * FIXME - what about controllers on other busses? - IDs must be -- cgit v1.2.3 From 109cdbc223f6e2d6c80f8371f22415b50c18a366 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 18 May 2012 16:52:19 -0600 Subject: PCI: remove pci_bus_find_ext_capability() (unused) pci_bus_find_ext_capability() is unused, and this patch removes it. Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..2618ad996535 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -714,8 +714,6 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev); int pci_find_capability(struct pci_dev *dev, int cap); int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability(struct pci_dev *dev, int cap); -int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, - int cap); int pci_find_ht_capability(struct pci_dev *dev, int ht_cap); int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); -- cgit v1.2.3 From f5d411c91ede162240f34e05a233f2759412988e Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sun, 31 Jul 2011 17:44:12 +0200 Subject: nohz: Rename ts->idle_tick to ts->last_tick Now that idle and nohz logics are going to be independant each others, ts->idle_tick becomes too much a biased name to describe the field that saves the last scheduled tick on top of which we re-calculate the next tick to schedule when the timer is restarted. We want to reuse this even to stop the tick outside idle cases. So let's rename it to some more generic name: ts->last_tick. This changes a bit the timer list stat export so we need to increase its version. Signed-off-by: Frederic Weisbecker Cc: Alessio Igor Bogani Cc: Andrew Morton Cc: Avi Kivity Cc: Chris Metcalf Cc: Christoph Lameter Cc: Daniel Lezcano Cc: Geoff Levand Cc: Gilad Ben Yossef Cc: Hakan Akkan Cc: Ingo Molnar Cc: Kevin Hilman Cc: Max Krasnyansky Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Stephen Hemminger Cc: Steven Rostedt Cc: Sven-Thorsten Dietrich Cc: Thomas Gleixner --- include/linux/tick.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tick.h b/include/linux/tick.h index ab8be90b5cc9..f37fceb69b73 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -31,10 +31,10 @@ enum tick_nohz_mode { * struct tick_sched - sched tick emulation and no idle tick control/stats * @sched_timer: hrtimer to schedule the periodic tick in high * resolution mode - * @idle_tick: Store the last idle tick expiry time when the tick - * timer is modified for idle sleeps. This is necessary + * @last_tick: Store the last tick expiry time when the tick + * timer is modified for nohz sleeps. This is necessary * to resume the tick timer operation in the timeline - * when the CPU returns from idle + * when the CPU returns from nohz sleep. * @tick_stopped: Indicator that the idle tick has been stopped * @idle_jiffies: jiffies at the entry to idle for idle time accounting * @idle_calls: Total number of idle calls @@ -51,7 +51,7 @@ struct tick_sched { struct hrtimer sched_timer; unsigned long check_clocks; enum tick_nohz_mode nohz_mode; - ktime_t idle_tick; + ktime_t last_tick; int inidle; int tick_stopped; unsigned long idle_jiffies; -- cgit v1.2.3 From 9136461ab921fd5066ba6a0de08399e2172f4d71 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 11 Jun 2012 06:36:13 +0000 Subject: net: keep name_hlist close to name __dev_get_by_name() is slow because pm_qos_req has been inserted between name[] and name_hlist, adding cache misses. pm_qos_req has nothing to do at the beginning of struct net_device Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index d94cb1431519..a0b84e3b087c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1046,10 +1046,9 @@ struct net_device { */ char name[IFNAMSIZ]; - struct pm_qos_request pm_qos_req; - - /* device name hash chain */ + /* device name hash chain, please keep it close to name[] */ struct hlist_node name_hlist; + /* snmp alias */ char *ifalias; @@ -1322,6 +1321,8 @@ struct net_device { /* group the device belongs to */ int group; + + struct pm_qos_request pm_qos_req; }; #define to_net_dev(d) container_of(d, struct net_device, dev) -- cgit v1.2.3 From a6e51c1e3425fe61040e9e770f514cfdf576a1f0 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Fri, 8 Jun 2012 12:22:46 +0200 Subject: staging: Delete if_strip.h Commit f80a3f62383bf673c310926d55142d51f118926d ("Staging: strip: delete the driver") left if_strip.h unused: nothing in the tree includes it anymore. It is still exported, but since nothing in the kernel uses struct MetricomAddress, that seems pointless. Delete this header too. Signed-off-by: Paul Bolle Signed-off-by: Greg Kroah-Hartman --- include/linux/Kbuild | 1 - include/linux/if_strip.h | 27 --------------------------- 2 files changed, 28 deletions(-) delete mode 100644 include/linux/if_strip.h (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 8760be30b375..9366142ec7e5 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -183,7 +183,6 @@ header-y += if_ppp.h header-y += if_pppol2tp.h header-y += if_pppox.h header-y += if_slip.h -header-y += if_strip.h header-y += if_team.h header-y += if_tun.h header-y += if_tunnel.h diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h deleted file mode 100644 index 6526a6235832..000000000000 --- a/include/linux/if_strip.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * if_strip.h -- - * - * Definitions for the STRIP interface - * - * Copyright 1996 The Board of Trustees of The Leland Stanford - * Junior University. All Rights Reserved. - * - * Permission to use, copy, modify, and distribute this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies. Stanford University - * makes no representations about the suitability of this - * software for any purpose. It is provided "as is" without - * express or implied warranty. - */ - -#ifndef __LINUX_STRIP_H -#define __LINUX_STRIP_H - -#include - -typedef struct { - __u8 c[6]; -} MetricomAddress; - -#endif -- cgit v1.2.3 From 12ea6cad1c7d046e21decc18b0e2170c6794dc51 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:26:55 +0000 Subject: PCI: add PCI DMA source ID quirk DMA transactions are tagged with the source ID of the device making the request. Occasionally hardware screws this up and uses the source ID of a different device (often the wrong function number of a multifunction device). A specific Ricoh multifunction device is a prime example of this problem and included in this patch. Given a pci_dev, this function returns the pci_dev to use as the source ID for DMA. When hardware works correctly, this returns the input device. For the components of the Ricoh multifunction device, it returns the pci_dev for function 0. This will be used by IOMMU drivers for determining the boundaries of IOMMU groups as multiple devices using the same source ID must be contained within the same group. This can also be used by existing streaming DMA paths for the same purpose. [bhelgaas: fold in pci_dev_get() for !CONFIG_PCI] Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..39983be7b25b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1332,6 +1332,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus, static inline int pci_domain_nr(struct pci_bus *bus) { return 0; } +static inline struct pci_dev *pci_dev_get(struct pci_dev *dev) +{ return NULL; } + #define dev_is_pci(d) (false) #define dev_is_pf(d) (false) #define dev_num_vf(d) (0) @@ -1486,9 +1489,14 @@ enum pci_fixup_pass { #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); +struct pci_dev *pci_get_dma_source(struct pci_dev *dev); #else static inline void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} +static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev) +{ + return pci_dev_get(dev); +} #endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); -- cgit v1.2.3 From c32823f82b42abc1f08b365085862fd1d57c0b61 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Fri, 1 Jun 2012 15:16:25 -0600 Subject: PCI: make pci_ltr_supported() static The PCI Express Latency Tolerance Reporting (LTR) feature's pci_ltr_supported() routine is currently only used within drivers/pci/pci.c so make it static. Acked-by: Donald Dutile Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..b2bec26b7f0a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -875,7 +875,6 @@ enum pci_obff_signal_type { int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type); void pci_disable_obff(struct pci_dev *dev); -bool pci_ltr_supported(struct pci_dev *dev); int pci_enable_ltr(struct pci_dev *dev); void pci_disable_ltr(struct pci_dev *dev); int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns); -- cgit v1.2.3 From c463b8cb9350cf1230cefe467a1cf279140a5437 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Fri, 1 Jun 2012 15:16:37 -0600 Subject: PCI: add pci_pcie_cap2() check for PCIe feature capabilities >= v2 This patch resolves potential issues when accessing PCI Express Capability structures. The makeup of the capability varies substantially between v1 and v2: Version 1 of the PCI Express Capability (defined by PCI Express 1.0 and 1.1 base) neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. Version 2 of the PCI Express Capability (defined by PCIe 1.1 Capability Structure Expansion ECN, PCIe 2.0, 2.1, and 3.0) added additional registers to the structure and requires all registers to be either implemented or hardwired to 0. Due to the differences in the capability structures, code dealing with capability features must be careful not to access the additional registers introduced with v2 unless the device is specifically known to be a v2 capable device. Otherwise, attempts to access non-existant registers will occur. This is a subtle issue that is hard to track down when it occurs (and it has - see commit 864d296cf94). To try and help mitigate such occurrences, this patch introduces pci_pcie_cap2() which is similar to pci_pcie_cap() but also checks that the PCIe capability version is >= 2. pci_pcie_cap2() should be used for qualifying PCIe capability features introduced after v1. Suggested by Don Dutile. Acked-by: Donald Dutile Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas --- include/linux/pci_regs.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f543412..e7642f5bb12a 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -507,6 +507,12 @@ #define PCI_EXP_RTSTA 32 /* Root Status */ #define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ #define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +/* + * Note that the following PCI Express 'Capability Structure' registers + * were introduced with 'Capability Version' 0x2 (v2). These registers + * do not exist on devices with Capability Version 1. Use pci_pcie_cap2() + * to use these fields safely. + */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ #define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ -- cgit v1.2.3 From 2177905ca7419c49910d47e38e44790affd918cc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 11 Jun 2012 23:56:09 -0700 Subject: Input: fix input.h kernel-doc warning Fix kernel-doc warning in input.h: Warning(include/linux/input.h:140): No description found for parameter 'len' Signed-off-by: Randy Dunlap Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index a81671453575..2740d080ec6b 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -116,6 +116,7 @@ struct input_keymap_entry { /** * EVIOCGMTSLOTS(len) - get MT slot values + * @len: size of the data buffer in bytes * * The ioctl buffer argument should be binary equivalent to * -- cgit v1.2.3 From 535588e61a007416f46cf08b4ccb6cc73b3f6fb0 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 11 Jun 2012 18:14:16 -0700 Subject: ieee80211: definitions for Microsoft Vendor OUI and WPA OUI type Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index f831078182de..98c86ff657bb 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1589,6 +1589,8 @@ enum ieee80211_sa_query_action { #define WLAN_OUI_WFA 0x506f9a #define WLAN_OUI_TYPE_WFA_P2P 9 +#define WLAN_OUI_MICROSOFT 0x0050f2 +#define WLAN_OUI_TYPE_MICROSOFT_WPA 1 /* * WMM/802.11e Tspec Element -- cgit v1.2.3 From ad805758c0eb25bce7b2e3b298d63dc62a1bc71c Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:07 +0000 Subject: PCI: add ACS validation utility In a PCI environment, transactions aren't always required to reach the root bus before being re-routed. Intermediate switches between an endpoint and the root bus can redirect DMA back downstream before things like IOMMUs have a chance to intervene. Legacy PCI is always susceptible to this as it operates on a shared bus. PCIe added a new capability to describe and control this behavior, Access Control Services, or ACS. The utility function pci_acs_enabled() allows us to test the ACS capabilities of an individual devices against a set of flags while pci_acs_path_enabled() tests a complete path from a given downstream device up to the specified upstream device. We also include the ability to add device specific tests as it's likely we'll see devices that do not implement ACS, but want to indicate support for various capabilities in this space. Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 39983be7b25b..dd7af0f37b3a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1490,6 +1490,7 @@ enum pci_fixup_pass { #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); struct pci_dev *pci_get_dma_source(struct pci_dev *dev); +int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags); #else static inline void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} @@ -1497,6 +1498,11 @@ static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev) { return pci_dev_get(dev); } +static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev, + u16 acs_flags) +{ + return -ENOTTY; +} #endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); @@ -1599,7 +1605,9 @@ static inline bool pci_is_pcie(struct pci_dev *dev) } void pci_request_acs(void); - +bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags); +bool pci_acs_path_enabled(struct pci_dev *start, + struct pci_dev *end, u16 acs_flags); #define PCI_VPD_LRDT 0x80 /* Large Resource Data Type */ #define PCI_VPD_LRDT_ID(x) (x | PCI_VPD_LRDT) -- cgit v1.2.3 From c63587d7f5b9db84e71daf5962dc0394eb657da2 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:19 +0000 Subject: PCI: export pci_user functions for use by other drivers VFIO PCI support will make use of these for user-initiated PCI config accesses. Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index dd7af0f37b3a..9d04599c6bd9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -777,6 +777,14 @@ static inline int pci_write_config_dword(const struct pci_dev *dev, int where, return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); } +/* user-space driven config access */ +int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); +int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); +int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val); +int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val); +int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val); +int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); + int __must_check pci_enable_device(struct pci_dev *dev); int __must_check pci_enable_device_io(struct pci_dev *dev); int __must_check pci_enable_device_mem(struct pci_dev *dev); -- cgit v1.2.3 From a6961651408afa9387d6df43c4a1dc4fd35dcb1b Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:33 +0000 Subject: PCI: create common pcibios_err_to_errno For returning errors out to non-PCI code. Re-name xen's version. Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 9d04599c6bd9..a691f62bcf89 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -474,6 +474,32 @@ static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; #define PCIBIOS_SET_FAILED 0x88 #define PCIBIOS_BUFFER_TOO_SMALL 0x89 +/* + * Translate above to generic errno for passing back through non-pci. + */ +static inline int pcibios_err_to_errno(int err) +{ + if (err <= PCIBIOS_SUCCESSFUL) + return err; /* Assume already errno */ + + switch (err) { + case PCIBIOS_FUNC_NOT_SUPPORTED: + return -ENOENT; + case PCIBIOS_BAD_VENDOR_ID: + return -EINVAL; + case PCIBIOS_DEVICE_NOT_FOUND: + return -ENODEV; + case PCIBIOS_BAD_REGISTER_NUMBER: + return -EFAULT; + case PCIBIOS_SET_FAILED: + return -EIO; + case PCIBIOS_BUFFER_TOO_SMALL: + return -ENOSPC; + } + + return -ENOTTY; +} + /* Low-level architecture-dependent routines */ struct pci_ops { -- cgit v1.2.3 From a0dee2ed0cdc666b5622f1fc74979355a6b36850 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:45 +0000 Subject: PCI: misc pci_reg additions Fill in many missing definitions and add sizeof fields for many sections allowing for more extensive config parsing. Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci_regs.h | 113 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 101 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f543412..526d2c4bc3a6 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -26,6 +26,7 @@ * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ +#define PCI_STD_HEADER_SIZEOF 64 #define PCI_VENDOR_ID 0x00 /* 16 bits */ #define PCI_DEVICE_ID 0x02 /* 16 bits */ #define PCI_COMMAND 0x04 /* 16 bits */ @@ -209,9 +210,12 @@ #define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ #define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ #define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ +#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */ #define PCI_CAP_ID_EXP 0x10 /* PCI Express */ #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */ #define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ +#define PCI_CAP_ID_MAX PCI_CAP_ID_AF #define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ #define PCI_CAP_SIZEOF 4 @@ -276,6 +280,7 @@ #define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ #define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ #define PCI_VPD_DATA 4 /* 32-bits of data returned here */ +#define PCI_CAP_VPD_SIZEOF 8 /* Slot Identification */ @@ -297,8 +302,10 @@ #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ #define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ #define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ +#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */ #define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ #define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ +#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ /* MSI-X registers */ #define PCI_MSIX_FLAGS 2 @@ -308,6 +315,7 @@ #define PCI_MSIX_TABLE 4 #define PCI_MSIX_PBA 8 #define PCI_MSIX_FLAGS_BIRMASK (7 << 0) +#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ /* MSI-X entry's format */ #define PCI_MSIX_ENTRY_SIZE 16 @@ -338,6 +346,7 @@ #define PCI_AF_CTRL_FLR 0x01 #define PCI_AF_STATUS 5 #define PCI_AF_STATUS_TP 0x01 +#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ /* PCI-X registers */ @@ -374,6 +383,10 @@ #define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ +#define PCI_X_ECC_CSR 8 /* ECC control and status */ +#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */ +#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ +#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ /* PCI Bridge Subsystem ID registers */ @@ -462,6 +475,7 @@ #define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ @@ -521,6 +535,7 @@ #define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ #define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ #define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ @@ -529,23 +544,43 @@ #define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) #define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) -#define PCI_EXT_CAP_ID_ERR 1 -#define PCI_EXT_CAP_ID_VC 2 -#define PCI_EXT_CAP_ID_DSN 3 -#define PCI_EXT_CAP_ID_PWR 4 -#define PCI_EXT_CAP_ID_VNDR 11 -#define PCI_EXT_CAP_ID_ACS 13 -#define PCI_EXT_CAP_ID_ARI 14 -#define PCI_EXT_CAP_ID_ATS 15 -#define PCI_EXT_CAP_ID_SRIOV 16 -#define PCI_EXT_CAP_ID_PRI 19 -#define PCI_EXT_CAP_ID_LTR 24 -#define PCI_EXT_CAP_ID_PASID 27 +#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */ +#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */ +#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */ +#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */ +#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */ +#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */ +#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */ +#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */ +#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */ +#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */ +#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */ +#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */ +#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */ +#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */ +#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */ +#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */ +#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */ +#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */ +#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */ +#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */ +#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */ +#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */ +#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */ +#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ +#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID + +#define PCI_EXT_CAP_DSN_SIZEOF 12 +#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 /* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ #define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ #define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ #define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ #define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ @@ -555,6 +590,11 @@ #define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ #define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ #define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */ +#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */ +#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */ +#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */ +#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */ #define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ /* Same bits as above */ #define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ @@ -565,6 +605,9 @@ #define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ #define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ #define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */ +#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */ +#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */ #define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ /* Same bits as above */ #define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ @@ -596,12 +639,18 @@ /* Virtual Channel */ #define PCI_VC_PORT_REG1 4 +#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */ #define PCI_VC_PORT_REG2 8 +#define PCI_VC_REG2_32_PHASE 0x2 +#define PCI_VC_REG2_64_PHASE 0x4 +#define PCI_VC_REG2_128_PHASE 0x8 #define PCI_VC_PORT_CTRL 12 #define PCI_VC_PORT_STATUS 14 #define PCI_VC_RES_CAP 16 #define PCI_VC_RES_CTRL 20 #define PCI_VC_RES_STATUS 26 +#define PCI_CAP_VC_BASE_SIZEOF 0x10 +#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C /* Power Budgeting */ #define PCI_PWR_DSR 4 /* Data Select Register */ @@ -614,6 +663,7 @@ #define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ #define PCI_PWR_CAP 12 /* Capability */ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ +#define PCI_EXT_CAP_PWR_SIZEOF 16 /* * Hypertransport sub capability types @@ -646,6 +696,8 @@ #define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ #define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ #define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ +#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */ +#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */ /* Alternative Routing-ID Interpretation */ #define PCI_ARI_CAP 0x04 /* ARI Capability Register */ @@ -656,6 +708,7 @@ #define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ #define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ #define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ +#define PCI_EXT_CAP_ARI_SIZEOF 8 /* Address Translation Service */ #define PCI_ATS_CAP 0x04 /* ATS Capability Register */ @@ -665,6 +718,7 @@ #define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */ #define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ #define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ +#define PCI_EXT_CAP_ATS_SIZEOF 8 /* Page Request Interface */ #define PCI_PRI_CTRL 0x04 /* PRI control register */ @@ -676,6 +730,7 @@ #define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */ #define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */ #define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ +#define PCI_EXT_CAP_PRI_SIZEOF 16 /* PASID capability */ #define PCI_PASID_CAP 0x04 /* PASID feature register */ @@ -685,6 +740,7 @@ #define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */ #define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */ #define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */ +#define PCI_EXT_CAP_PASID_SIZEOF 8 /* Single Root I/O Virtualization */ #define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ @@ -716,12 +772,14 @@ #define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ #define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ #define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ +#define PCI_EXT_CAP_SRIOV_SIZEOF 64 #define PCI_LTR_MAX_SNOOP_LAT 0x4 #define PCI_LTR_MAX_NOSNOOP_LAT 0x6 #define PCI_LTR_VALUE_MASK 0x000003ff #define PCI_LTR_SCALE_MASK 0x00001c00 #define PCI_LTR_SCALE_SHIFT 10 +#define PCI_EXT_CAP_LTR_SIZEOF 8 /* Access Control Service */ #define PCI_ACS_CAP 0x04 /* ACS Capability Register */ @@ -732,7 +790,38 @@ #define PCI_ACS_UF 0x10 /* Upstream Forwarding */ #define PCI_ACS_EC 0x20 /* P2P Egress Control */ #define PCI_ACS_DT 0x40 /* Direct Translated P2P */ +#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */ #define PCI_ACS_CTRL 0x06 /* ACS Control Register */ #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ +#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */ +#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */ + +/* sata capability */ +#define PCI_SATA_REGS 4 /* SATA REGs specifier */ +#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */ +#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */ +#define PCI_SATA_SIZEOF_SHORT 8 +#define PCI_SATA_SIZEOF_LONG 16 + +/* resizable BARs */ +#define PCI_REBAR_CTRL 8 /* control register */ +#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */ +#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */ + +/* dynamic power allocation */ +#define PCI_DPA_CAP 4 /* capability register */ +#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */ +#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */ + +/* TPH Requester */ +#define PCI_TPH_CAP 4 /* capability register */ +#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */ +#define PCI_TPH_LOC_NONE 0x000 /* no location */ +#define PCI_TPH_LOC_CAP 0x200 /* in capability */ +#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */ +#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */ +#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */ + #endif /* LINUX_PCI_REGS_H */ -- cgit v1.2.3 From cf35ad61aca2c0c8983fa1e140c901f6588aba7e Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Fri, 8 Jun 2012 18:06:45 +0200 Subject: iio: add mcp4725 I2C DAC driver v5: * fix warnings (Jonathan Cameron) v4: * remove unused indio_dev pointer in mcp4725_data (Jonathan Cameron) * use u16 instead of unsigned short in mcp4725_data (Jonathan Cameron) * #include mcp4725.h from linux/iio/dac/ v3: * move from staging to drivers/iio * switch to chan_spec * dev_get_drvdata() -> dev_to_iio_dev() * annotate probe() and remove() with __devinit and __devexit v2 (based on comments from Jonathan Cameron and Lars-Peter Clausen): * did NOT switch to chan_spec yet * rebase to staging-next tree, update iio header locations * dropped dac.h #include, not needed * strict_strtol() -> kstrtol() * call iio_device_unregister() in remove() * everything in one patch Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/dac/mcp4725.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 include/linux/iio/dac/mcp4725.h (limited to 'include/linux') diff --git a/include/linux/iio/dac/mcp4725.h b/include/linux/iio/dac/mcp4725.h new file mode 100644 index 000000000000..91530e6611e9 --- /dev/null +++ b/include/linux/iio/dac/mcp4725.h @@ -0,0 +1,16 @@ +/* + * MCP4725 DAC driver + * + * Copyright (C) 2012 Peter Meerwald + * + * Licensed under the GPL-2 or later. + */ + +#ifndef IIO_DAC_MCP4725_H_ +#define IIO_DAC_MCP4725_H_ + +struct mcp4725_platform_data { + u16 vref_mv; +}; + +#endif /* IIO_DAC_MCP4725_H_ */ -- cgit v1.2.3 From 988bb033d703c8b2e0e71c63f3f55616a0220ced Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 14:39:37 +0200 Subject: iio: drop comment about 'real' channels Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/types.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 1b073b1cc7c2..d086736a9033 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -11,7 +11,6 @@ #define _IIO_TYPES_H_ enum iio_chan_type { - /* real channel types */ IIO_VOLTAGE, IIO_CURRENT, IIO_POWER, -- cgit v1.2.3 From 1787948873fd2ca730fb5891b6a2ade510367ace Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:45 +0200 Subject: iio: fix typos in iio.h v2: * "used in in-kernel" (Jonathan Cameron) Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 944c63511731..01afaa08ff21 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -131,7 +131,7 @@ struct iio_chan_spec_ext_info { /** * struct iio_enum - Enum channel info attribute - * items: A array of strings. + * items: An array of strings. * num_items: Length of the item array. * set: Set callback function, may be NULL. * get: Get callback function, may be NULL. @@ -218,7 +218,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * @extend_name: Allows labeling of channel attributes with an * informative name. Note this has no effect codes etc, * unlike modifiers. - * @datasheet_name: A name used in in kernel mapping of channels. It should + * @datasheet_name: A name used in in-kernel mapping of channels. It should * correspond to the first name that the channel is referred * to by in the datasheet (e.g. IND), or the nearest * possible compound name (e.g. IND-INC). @@ -393,7 +393,7 @@ struct iio_buffer_setup_ops { * @trig: [INTERN] current device trigger (buffer modes) * @pollfunc: [DRIVER] function run on trigger being received * @channels: [DRIVER] channel specification structure table - * @num_channels: [DRIVER] number of chanels specified in @channels. + * @num_channels: [DRIVER] number of channels specified in @channels. * @channel_attr_list: [INTERN] keep track of automatically created channel * attributes * @chan_attr_group: [INTERN] group for all attrs in base directory -- cgit v1.2.3 From a16561c6f713630270b905297f3eedf02db7fa98 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:46 +0200 Subject: iio: clarify channel and indexed in struct iio_chan_spec Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 01afaa08ff21..9a9e6d52a6de 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -196,7 +196,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, /** * struct iio_chan_spec - specification of a single channel * @type: What type of measurement is the channel making. - * @channel: What number or name do we wish to assign the channel. + * @channel: What number do we wish to assign the channel. * @channel2: If there is a second number for a differential * channel then this is it. If modified is set then the * value here specifies the modifier. @@ -227,9 +227,8 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * channel2. Examples are IIO_MOD_X for axial sensors about * the 'x' axis. * @indexed: Specify the channel has a numerical index. If not, - * the value in channel will be suppressed for attribute - * but not for event codes. Typically set it to 0 when - * the index is false. + * the channel index number will be suppressed for sysfs + * attributes but not for event codes. * @differential: Channel is differential. */ struct iio_chan_spec { -- cgit v1.2.3 From f4c349395e8ad4fe07f1222502568f0d9d5d1dfc Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:47 +0200 Subject: iio: mark struct iio_enum elements with @ in comment Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 9a9e6d52a6de..bd3e7217ceee 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -131,10 +131,10 @@ struct iio_chan_spec_ext_info { /** * struct iio_enum - Enum channel info attribute - * items: An array of strings. - * num_items: Length of the item array. - * set: Set callback function, may be NULL. - * get: Get callback function, may be NULL. + * @items: An array of strings. + * @num_items: Length of the item array. + * @set: Set callback function, may be NULL. + * @get: Get callback function, may be NULL. * * The iio_enum struct can be used to implement enum style channel attributes. * Enum style attributes are those which have a set of strings which map to -- cgit v1.2.3 From 7dcd7b60724cab551deba54f31752fa8959efab4 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:48 +0200 Subject: iio: cleanup iio/iio.h indentation of parameter description, fix parameter name (@dev -> @indio_dev) in comments, IIO device info structure -> IIO device structure Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index bd3e7217ceee..ae0cad908182 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -131,10 +131,10 @@ struct iio_chan_spec_ext_info { /** * struct iio_enum - Enum channel info attribute - * @items: An array of strings. - * @num_items: Length of the item array. - * @set: Set callback function, may be NULL. - * @get: Get callback function, may be NULL. + * @items: An array of strings. + * @num_items: Length of the item array. + * @set: Set callback function, may be NULL. + * @get: Get callback function, may be NULL. * * The iio_enum struct can be used to implement enum style channel attributes. * Enum style attributes are those which have a set of strings which map to @@ -162,9 +162,9 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, /** * IIO_ENUM() - Initialize enum extended channel attribute - * @_name: Attribute name - * @_shared: Whether the attribute is shared between all channels - * @_e: Pointer to a iio_enum struct + * @_name: Attribute name + * @_shared: Whether the attribute is shared between all channels + * @_e: Pointer to a iio_enum struct * * This should usually be used together with IIO_ENUM_AVAILABLE() */ @@ -179,8 +179,8 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, /** * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute - * @_name: Attribute name ("_available" will be appended to the name) - * @_e: Pointer to a iio_enum struct + * @_name: Attribute name ("_available" will be appended to the name) + * @_e: Pointer to a iio_enum struct * * Creates a read only attribute which list all the available enum items in a * space separated list. This should usually be used together with IIO_ENUM() @@ -201,7 +201,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * channel then this is it. If modified is set then the * value here specifies the modifier. * @address: Driver specific identifier. - * @scan_index: Monotonic index to give ordering in scans when read + * @scan_index: Monotonic index to give ordering in scans when read * from a buffer. * @scan_type: Sign: 's' or 'u' to specify signed or unsigned * realbits: Number of valid bits of data @@ -211,7 +211,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * endianness: little or big endian * @info_mask: What information is to be exported about this channel. * This includes calibbias, scale etc. - * @event_mask: What events can this channel produce. + * @event_mask: What events can this channel produce. * @ext_info: Array of extended info attributes for this channel. * The array is NULL terminated, the last element should * have it's name field set to NULL. @@ -482,7 +482,7 @@ extern struct bus_type iio_bus_type; /** * iio_device_put() - reference counted deallocation of struct device - * @dev: the iio_device containing the device + * @indio_dev: IIO device structure containing the device **/ static inline void iio_device_put(struct iio_dev *indio_dev) { @@ -492,7 +492,7 @@ static inline void iio_device_put(struct iio_dev *indio_dev) /** * dev_to_iio_dev() - Get IIO device struct from a device struct - * @dev: The device embedded in the IIO device + * @dev: The device embedded in the IIO device * * Note: The device must be a IIO device, otherwise the result is undefined. */ @@ -503,7 +503,7 @@ static inline struct iio_dev *dev_to_iio_dev(struct device *dev) /** * iio_device_get() - increment reference count for the device - * @indio_dev: IIO device structure + * @indio_dev: IIO device structure * * Returns: The passed IIO device **/ @@ -516,7 +516,7 @@ static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) #define IIO_ALIGN L1_CACHE_BYTES /** * iio_device_alloc() - allocate an iio_dev from a driver - * @sizeof_priv: Space to allocate for private structure. + * @sizeof_priv: Space to allocate for private structure. **/ struct iio_dev *iio_device_alloc(int sizeof_priv); @@ -533,13 +533,13 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv) /** * iio_device_free() - free an iio_dev from a driver - * @dev: the iio_dev associated with the device + * @indio_dev: the iio_dev associated with the device **/ void iio_device_free(struct iio_dev *indio_dev); /** * iio_buffer_enabled() - helper function to test if the buffer is enabled - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) { @@ -549,7 +549,7 @@ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) /** * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ #if defined(CONFIG_DEBUG_FS) static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) -- cgit v1.2.3 From d0daebc3d622f95db181601cb0c4a0781f74f758 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Tue, 12 Jun 2012 00:44:01 +0000 Subject: ipv4: Add interface option to enable routing of 127.0.0.0/8 Routing of 127/8 is tradtionally forbidden, we consider packets from that address block martian when routing and do not process corresponding ARP requests. This is a sane default but renders a huge address space practically unuseable. The RFC states that no address within the 127/8 block should ever appear on any network anywhere but it does not forbid the use of such addresses outside of the loopback device in particular. For example to address a pool of virtual guests behind a load balancer. This patch adds a new interface option 'route_localnet' enabling routing of the 127/8 address block and processing of ARP requests on a specific interface. Note that for the feature to work, the default local route covering 127/8 dev lo needs to be removed. Example: $ sysctl -w net.ipv4.conf.eth0.route_localnet=1 $ ip route del 127.0.0.0/8 dev lo table local $ ip addr add 127.1.0.1/16 dev eth0 $ ip route flush cache V2: Fix invalid check to auto flush cache (thanks davem) Signed-off-by: Thomas Graf Acked-by: Neil Horman Signed-off-by: David S. Miller --- include/linux/inetdevice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 597f4a9f3240..67f9ddacb70c 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -38,6 +38,7 @@ enum IPV4_DEVCONF_ACCEPT_LOCAL, IPV4_DEVCONF_SRC_VMARK, IPV4_DEVCONF_PROXY_ARP_PVLAN, + IPV4_DEVCONF_ROUTE_LOCALNET, __IPV4_DEVCONF_MAX }; @@ -131,6 +132,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_PROMOTE_SECONDARIES(in_dev) \ IN_DEV_ORCONF((in_dev), \ PROMOTE_SECONDARIES) +#define IN_DEV_ROUTE_LOCALNET(in_dev) IN_DEV_ORCONF(in_dev, ROUTE_LOCALNET) #define IN_DEV_RX_REDIRECTS(in_dev) \ ((IN_DEV_FORWARD(in_dev) && \ -- cgit v1.2.3 From 4a5a14d39e8164b5c77f1bf42851a58a69a6c7b2 Mon Sep 17 00:00:00 2001 From: "tom.leiming@gmail.com" Date: Mon, 11 Jun 2012 15:19:43 +0000 Subject: usbnet: remove flag of EVENT_DEV_WAKING The flag of EVENT_DEV_WAKING is not used any more, so just remove it. Signed-off-by: Ming Lei Signed-off-by: David S. Miller --- include/linux/usb/usbnet.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 76f439647c4b..f87cf622317f 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -66,9 +66,8 @@ struct usbnet { # define EVENT_STS_SPLIT 3 # define EVENT_LINK_RESET 4 # define EVENT_RX_PAUSED 5 -# define EVENT_DEV_WAKING 6 -# define EVENT_DEV_ASLEEP 7 -# define EVENT_DEV_OPEN 8 +# define EVENT_DEV_ASLEEP 6 +# define EVENT_DEV_OPEN 7 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) -- cgit v1.2.3 From 95603e2293de556de7e82221649bfd7fd98b64a3 Mon Sep 17 00:00:00 2001 From: Michel Machado Date: Tue, 12 Jun 2012 10:16:35 +0000 Subject: net-next: add dev_loopback_xmit() to avoid duplicate code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add dev_loopback_xmit() in order to deduplicate functions ip_dev_loopback_xmit() (in net/ipv4/ip_output.c) and ip6_dev_loopback_xmit() (in net/ipv6/ip6_output.c). I was about to reinvent the wheel when I noticed that ip_dev_loopback_xmit() and ip6_dev_loopback_xmit() do exactly what I need and are not IP-only functions, but they were not available to reuse elsewhere. ip6_dev_loopback_xmit() does not have line "skb_dst_force(skb);", but I understand that this is harmless, and should be in dev_loopback_xmit(). Signed-off-by: Michel Machado CC: "David S. Miller" CC: Alexey Kuznetsov CC: James Morris CC: Hideaki YOSHIFUJI CC: Patrick McHardy CC: Eric Dumazet CC: Jiri Pirko CC: "Michał Mirosław" CC: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a0b84e3b087c..2c2ecea28a1b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1627,6 +1627,7 @@ extern int dev_alloc_name(struct net_device *dev, const char *name); extern int dev_open(struct net_device *dev); extern int dev_close(struct net_device *dev); extern void dev_disable_lro(struct net_device *dev); +extern int dev_loopback_xmit(struct sk_buff *newskb); extern int dev_queue_xmit(struct sk_buff *skb); extern int register_netdevice(struct net_device *dev); extern void unregister_netdevice_queue(struct net_device *dev, -- cgit v1.2.3 From 4a4ab0d7c9abe4e403bcea6ae2fc5d3f28a64a29 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Jun 2012 11:17:11 +0200 Subject: nl80211: fix sched scan match attribute name It should be NL80211_SCHED_SCAN_MATCH_ATTR_SSID as documented, not NL80211_ATTR_SCHED_SCAN_MATCH_SSID. Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c61e1621822c..e7b1fc1fe26b 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1963,7 +1963,7 @@ enum nl80211_reg_rule_attr { enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -1971,6 +1971,9 @@ enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 }; +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + /** * enum nl80211_reg_rule_flags - regulatory rule flags * -- cgit v1.2.3 From 73c3df3ba3f2d7fe3ea47f944282f3cda31c5505 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Jun 2012 11:17:14 +0200 Subject: cfg80211/nl80211: fix kernel-doc Add missing entries to nl80211.h and fix the kernel-doc notation in cfg80211.h. Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e7b1fc1fe26b..e4f41bdebc07 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -277,6 +277,12 @@ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -456,6 +462,10 @@ * the frame. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command * is used to configure connection quality monitoring notification trigger * levels. @@ -771,6 +781,13 @@ enum nl80211_commands { * section 7.3.2.25.1, e.g. 0x000FAC04) * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used * * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing @@ -1006,6 +1023,8 @@ enum nl80211_commands { * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * * @NL80211_ATTR_CQM: connection quality monitor configuration in a * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. * @@ -1063,7 +1082,7 @@ enum nl80211_commands { * flag isn't set, the frame will be rejected. This is also used as an * nl80211 capability flag. * - * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) * * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. @@ -1087,10 +1106,10 @@ enum nl80211_commands { * indicate which WoW triggers should be enabled. This is also * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN * triggers. - + * * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. - + * * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more * sets of attributes to match during scheduled scans. Only BSSs * that match any of the sets will be reported. These are @@ -1117,7 +1136,7 @@ enum nl80211_commands { * are managed in software: interfaces of these types aren't subject to * any restrictions in their number or combinations. * - * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. * * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, @@ -1184,7 +1203,6 @@ enum nl80211_commands { * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from * &enum nl80211_feature_flags and is advertised in wiphy information. * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * * requests while operating in AP-mode. * This attribute holds a bitmap of the supported protocols for * offloading (see &enum nl80211_probe_resp_offload_support_attr). @@ -2507,6 +2525,11 @@ enum nl80211_band { NL80211_BAND_5GHZ, }; +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ enum nl80211_ps_state { NL80211_PS_DISABLED, NL80211_PS_ENABLED, -- cgit v1.2.3 From bd3810a58ba9c16702450c643ea3c557668185db Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 13 Jun 2012 14:29:16 +0100 Subject: regmap: Remove warning on stubbed dev_get_regmap() It's perfectly sensible to ask if there's a regmap for a device which doesn't have one so the stubbed version shouldn't complain, the caller should be prepared for this. Signed-off-by: Mark Brown --- include/linux/regmap.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index f9b624c83464..4191a4281587 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -386,7 +386,6 @@ static inline int regmap_register_patch(struct regmap *map, static inline struct regmap *dev_get_regmap(struct device *dev, const char *name) { - WARN_ONCE(1, "regmap API is disabled"); return NULL; } -- cgit v1.2.3 From b4bc9ef6253578ecc71eec79a7dd423d0a282a4b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 13 Jun 2012 11:27:11 +0800 Subject: regulator: tps65217: Convert to regulator_[is_enabled|get_voltage_sel]_regmap This patch converts .is_enabled and .get_voltage_sel to regulator_is_enabled_regmap and regulator_get_voltage_sel_regmap. For .enable, .disable, and .set_voltage_sel, the write protect level is either 1 or 2. So we cannot use regulator_[enable|disable|set_voltage_sel]_regmap. Now we store the enable reg/mask and vsel reg/mask in regulator_desc, so we can remove enable_mask, set_vout_reg, and set_vout_mask from struct tps_info. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/mfd/tps65217.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index e030ef9a64ee..4e035a41a9b0 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -229,9 +229,6 @@ struct tps65217_board { * @uv_to_vsel: Function pointer to get selector from voltage * @table: Table for non-uniform voltage step-size * @table_len: Length of the voltage table - * @enable_mask: Regulator enable mask bits - * @set_vout_reg: Regulator output voltage set register - * @set_vout_mask: Regulator output voltage set mask * * This data is used to check the regualtor voltage limits while setting. */ @@ -243,9 +240,6 @@ struct tps_info { int (*uv_to_vsel)(int uV, unsigned int *vsel); const int *table; unsigned int table_len; - unsigned int enable_mask; - unsigned int set_vout_reg; - unsigned int set_vout_mask; }; /** -- cgit v1.2.3 From 047fe3605235888f3ebcda0c728cb31937eadfe6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 12 Jun 2012 15:24:40 +0200 Subject: splice: fix racy pipe->buffers uses Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered by splice_shrink_spd() called from vmsplice_to_pipe() commit 35f3d14dbbc5 (pipe: add support for shrinking and growing pipes) added capability to adjust pipe->buffers. Problem is some paths don't hold pipe mutex and assume pipe->buffers doesn't change for their duration. Fix this by adding nr_pages_max field in struct splice_pipe_desc, and use it in place of pipe->buffers where appropriate. splice_shrink_spd() loses its struct pipe_inode_info argument. Reported-by: Dave Jones Signed-off-by: Eric Dumazet Cc: Jens Axboe Cc: Alexander Viro Cc: Tom Herbert Cc: stable # 2.6.35 Tested-by: Dave Jones Signed-off-by: Jens Axboe --- include/linux/splice.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/splice.h b/include/linux/splice.h index 26e5b613deda..09a545a7dfa3 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -51,7 +51,8 @@ struct partial_page { struct splice_pipe_desc { struct page **pages; /* page map */ struct partial_page *partial; /* pages[] may not be contig */ - int nr_pages; /* number of pages in map */ + int nr_pages; /* number of populated pages in map */ + unsigned int nr_pages_max; /* pages[] & partial[] arrays size */ unsigned int flags; /* splice flags */ const struct pipe_buf_operations *ops;/* ops associated with output pipe */ void (*spd_release)(struct splice_pipe_desc *, unsigned int); @@ -85,9 +86,8 @@ extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *, /* * for dynamic pipe sizing */ -extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *); -extern void splice_shrink_spd(struct pipe_inode_info *, - struct splice_pipe_desc *); +extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *); +extern void splice_shrink_spd(struct splice_pipe_desc *); extern void spd_release_page(struct splice_pipe_desc *, unsigned int); extern const struct pipe_buf_operations page_cache_pipe_buf_ops; -- cgit v1.2.3 From 4527715979a34601b783f5f12774586c679c2a89 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 28 May 2012 23:31:39 -0700 Subject: usb: renesas_usbhs: add DMAEngine ID specification note renesas_usbhs DMAEngine uses D0FIFO/D1FIFO, but the data transfer direction should be fixed for keeping consistency. This patch explain about it on renesas_usbhs.h Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/renesas_usbhs.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 547e59cc00ea..c5d36c65c33b 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -132,6 +132,14 @@ struct renesas_usbhs_driver_param { * option: * * dma id for dmaengine + * The data transfer direction on D0FIFO/D1FIFO should be + * fixed for keeping consistency. + * So, the platform id settings will be.. + * .d0_tx_id = xx_TX, + * .d1_rx_id = xx_RX, + * or + * .d1_tx_id = xx_TX, + * .d0_rx_id = xx_RX, */ int d0_tx_id; int d0_rx_id; -- cgit v1.2.3 From c2e935a7db6e7354e9dd138b7f6f4c53affc09d9 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Wed, 13 Jun 2012 20:34:12 +0800 Subject: USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phy - to decrease redundant since both ehci_hcd and ohci_hcd have the same variable - it helps access phy in usb core code - phy is more meaningful than transceiver Signed-off-by: Richard Zhao Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 7f855d50cdf5..c532cbeabfbc 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -93,6 +93,12 @@ struct usb_hcd { */ const struct hc_driver *driver; /* hw-specific hooks */ + /* + * OTG and some Host controllers need software interaction with phys; + * other external phys should be software-transparent + */ + struct usb_phy *phy; + /* Flags that need to be manipulated atomically because they can * change while the host controller is running. Always use * set_bit() or clear_bit() to change their values. -- cgit v1.2.3 From 92f02430934ca1c1e991a1ab3541880575042697 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 May 2012 18:51:11 -0700 Subject: PCI: add busn_res in struct pci_bus This adds a busn_res resource in struct pci_bus. This will replace the secondary/subordinate members and will be used to build a bus number resource tree to help with bus number allocation. [bhelgaas: changelog] CC: Andrew Morton Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..ba7c5cd314b7 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -419,6 +419,7 @@ struct pci_bus { struct list_head slots; /* list of slots on this bus */ struct resource *resource[PCI_BRIDGE_RESOURCE_NUM]; struct list_head resources; /* address space routed to this bus */ + struct resource busn_res; /* bus numbers routed to this bus */ struct pci_ops *ops; /* configuration access functions */ void *sysdata; /* hook for sys-specific extension */ -- cgit v1.2.3 From 3527ed81ca01bbaf09df952e68528377a9cd092f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 May 2012 18:51:11 -0700 Subject: PCI: remove secondary/subordinate in struct pci_bus The pci_bus secondary/subordinate members are now unused, so remove them. Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index ba7c5cd314b7..6b10966cd1b9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -427,8 +427,6 @@ struct pci_bus { unsigned char number; /* bus number */ unsigned char primary; /* number of primary bridge */ - unsigned char secondary; /* number of secondary bridge */ - unsigned char subordinate; /* max number of subordinate buses */ unsigned char max_bus_speed; /* enum pci_bus_speed */ unsigned char cur_bus_speed; /* enum pci_bus_speed */ -- cgit v1.2.3 From 98a3583107ed587ed3cfe2a1d8e5347421de5a80 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 18 May 2012 11:35:50 -0600 Subject: PCI: add busn_res operation functions Will use them insert/update busn res in pci_bus struct. [bhelgaas: print conflicting entry if insertion fails] Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 6b10966cd1b9..c4df570f3bbb 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -667,6 +667,9 @@ struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_create_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); +int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax); +int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax); +void pci_bus_release_busn_res(struct pci_bus *b); struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); -- cgit v1.2.3 From 67cdc827286366acb6c60c821013c1185ee00b36 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 May 2012 18:51:12 -0700 Subject: PCI: add default busn_resource We need to put into the resources list for legacy system. Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index c4df570f3bbb..8c8b44d62105 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -368,6 +368,8 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } +extern struct resource busn_resource; + struct pci_host_bridge_window { struct list_head list; struct resource *res; /* host bridge aperture (CPU address) */ -- cgit v1.2.3 From 81df2d594340dcb6d1a02191976be88a1ca8120c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 18 May 2012 21:27:43 +0200 Subject: USB: allow match on bInterfaceNumber MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some composite USB devices provide multiple interfaces with different functions, all using "vendor-specific" for class/subclass/protocol. Another OS use interface numbers to match the driver and interface. It seems these devices are designed with that in mind - using static interface numbers for the different functions. This adds support for matching against the bInterfaceNumber, allowing such devices to be supported without having to resort to testing against interface number whitelists and/or blacklists in the probe. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- include/linux/mod_devicetable.h | 7 +++++++ include/linux/usb.h | 16 ++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 5db93821f9c7..7771d453e5f3 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -78,6 +78,9 @@ struct ieee1394_device_id { * of a given interface; other interfaces may support other classes. * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass. * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass. + * @bInterfaceNumber: Number of interface; composite devices may use + * fixed interface numbers to differentiate between vendor-specific + * interfaces. * @driver_info: Holds information used by the driver. Usually it holds * a pointer to a descriptor understood by the driver, or perhaps * device flags. @@ -115,6 +118,9 @@ struct usb_device_id { __u8 bInterfaceSubClass; __u8 bInterfaceProtocol; + /* Used for vendor-specific interface matches */ + __u8 bInterfaceNumber; + /* not matched against */ kernel_ulong_t driver_info; }; @@ -130,6 +136,7 @@ struct usb_device_id { #define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 +#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400 #define HID_ANY_ID (~0) #define HID_BUS_ANY 0xffff diff --git a/include/linux/usb.h b/include/linux/usb.h index dea39dc551d4..f717fbdaee8e 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -776,6 +776,22 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) .idProduct = (prod), \ .bInterfaceProtocol = (pr) +/** + * USB_DEVICE_INTERFACE_NUMBER - describe a usb device with a specific interface number + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @num: bInterfaceNumber value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface number of devices. + */ +#define USB_DEVICE_INTERFACE_NUMBER(vend, prod, num) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_NUMBER, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceNumber = (num) + /** * USB_DEVICE_INFO - macro used to describe a class of usb devices * @cl: bDeviceClass value -- cgit v1.2.3 From f29e5956aebafe63f81e80f972c44c4a666e5c7f Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 26 May 2012 06:20:19 -0700 Subject: pstore: Add console log messages support Pstore doesn't support logging kernel messages in run-time, it only dumps dmesg when kernel oopses/panics. This makes pstore useless for debugging hangs caused by HW issues or improper use of HW (e.g. weird device inserted -> driver tried to write a reserved bits -> SoC hanged. In that case we don't get any messages in the pstore. Therefore, let's add a runtime logging support: PSTORE_TYPE_CONSOLE. Signed-off-by: Anton Vorontsov Acked-by: Kees Cook Acked-by: Colin Cross Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pstore.h b/include/linux/pstore.h index e1461e143be2..1bd014b8e432 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -29,6 +29,7 @@ enum pstore_type_id { PSTORE_TYPE_DMESG = 0, PSTORE_TYPE_MCE = 1, + PSTORE_TYPE_CONSOLE = 2, PSTORE_TYPE_UNKNOWN = 255 }; -- cgit v1.2.3 From b5d38e9bf1b0c4db19e336b59b38dfb5d28bf1bf Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 26 May 2012 06:20:23 -0700 Subject: pstore/ram: Add console messages handling The console log size is configurable via ramoops.console_size module option, and the log itself is available via /console-ramoops file. Signed-off-by: Anton Vorontsov Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 3b823d49a85a..9385d41cb1c3 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -93,6 +93,7 @@ struct ramoops_platform_data { unsigned long mem_size; unsigned long mem_address; unsigned long record_size; + unsigned long console_size; int dump_oops; bool ecc; }; -- cgit v1.2.3 From b8587daa756141da776e3d4c3a5a315f5af78708 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 26 May 2012 06:20:27 -0700 Subject: pstore/ram_core: Remove now unused code The code tried to maintain the global list of persistent ram zones, which isn't a great idea overall, plus since Android's ram_console is no longer there, we can remove some unused functions. Signed-off-by: Anton Vorontsov Acked-by: Kees Cook Acked-by: Colin Cross Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 9385d41cb1c3..2470bb591434 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -25,21 +25,6 @@ struct persistent_ram_buffer; -struct persistent_ram_descriptor { - const char *name; - phys_addr_t size; -}; - -struct persistent_ram { - phys_addr_t start; - phys_addr_t size; - - int num_descs; - struct persistent_ram_descriptor *descs; - - struct list_head node; -}; - struct persistent_ram_zone { phys_addr_t paddr; size_t size; @@ -63,15 +48,11 @@ struct persistent_ram_zone { size_t old_log_size; }; -int persistent_ram_early_init(struct persistent_ram *ram); - struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, size_t size, bool ecc); void persistent_ram_free(struct persistent_ram_zone *prz); void persistent_ram_zap(struct persistent_ram_zone *prz); -struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev, - bool ecc); int persistent_ram_write(struct persistent_ram_zone *prz, const void *s, unsigned int count); -- cgit v1.2.3 From b8c24c4aef94b1f0daafb450363fef13a1163780 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 13 Jun 2012 10:24:52 -0500 Subject: slob: Define page struct fields used in mm_types.h Define the fields used by slob in mm_types.h and use struct page instead of struct slob_page in slob. This cleans up numerous of typecasts in slob.c and makes readers aware of slob's use of page struct fields. [Also cleans up some bitrot in slob.c. The page struct field layout in slob.c is an old layout and does not match the one in mm_types.h] Reviewed-by: Glauber Costa Acked-by: David Rientjes Reviewed-by: Joonsoo Kim Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/mm_types.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index dad95bdd06d7..5922c3452592 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -53,7 +53,7 @@ struct page { struct { union { pgoff_t index; /* Our offset within mapping. */ - void *freelist; /* slub first free object */ + void *freelist; /* slub/slob first free object */ }; union { @@ -81,11 +81,12 @@ struct page { */ atomic_t _mapcount; - struct { + struct { /* SLUB */ unsigned inuse:16; unsigned objects:15; unsigned frozen:1; }; + int units; /* SLOB */ }; atomic_t _count; /* Usage count, see below. */ }; @@ -107,6 +108,8 @@ struct page { short int pobjects; #endif }; + + struct list_head list; /* slobs list of pages */ }; /* Remainder is not double word aligned */ -- cgit v1.2.3 From e571b0ad3495be5793e54e21cd244c4545c49d88 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 13 Jun 2012 10:24:55 -0500 Subject: slab: Use page struct fields instead of casting Add fields to the page struct so that it is properly documented that slab overlays the lru fields. This cleans up some casts in slab. Reviewed-by: Glauber Costa Reviewed-by: Joonsoo Kim Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/mm_types.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 5922c3452592..680a5e4e8cd5 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -110,6 +110,10 @@ struct page { }; struct list_head list; /* slobs list of pages */ + struct { /* slab fields */ + struct kmem_cache *slab_cache; + struct slab *slab_page; + }; }; /* Remainder is not double word aligned */ -- cgit v1.2.3 From 3b0efdfa1e719303536c04d9abca43abeb40f80a Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 13 Jun 2012 10:24:57 -0500 Subject: mm, sl[aou]b: Extract common fields from struct kmem_cache Define a struct that describes common fields used in all slab allocators. A slab allocator either uses the common definition (like SLOB) or is required to provide members of kmem_cache with the definition given. After that it will be possible to share code that only operates on those fields of kmem_cache. The patch basically takes the slob definition of kmem cache and uses the field namees for the other allocators. It also standardizes the names used for basic object lengths in allocators: object_size Struct size specified at kmem_cache_create. Basically the payload expected to be used by the subsystem. size The size of memory allocator for each object. This size is larger than object_size and includes padding, alignment and extra metadata for each object (f.e. for debugging and rcu). Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 24 ++++++++++++++++++++++++ include/linux/slab_def.h | 10 ++++++---- include/linux/slub_def.h | 2 +- 3 files changed, 31 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index 67d5d94b783a..0dd2dfa7beca 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -92,6 +92,30 @@ #define ZERO_OR_NULL_PTR(x) ((unsigned long)(x) <= \ (unsigned long)ZERO_SIZE_PTR) +/* + * Common fields provided in kmem_cache by all slab allocators + * This struct is either used directly by the allocator (SLOB) + * or the allocator must include definitions for all fields + * provided in kmem_cache_common in their definition of kmem_cache. + * + * Once we can do anonymous structs (C11 standard) we could put a + * anonymous struct definition in these allocators so that the + * separate allocations in the kmem_cache structure of SLAB and + * SLUB is no longer needed. + */ +#ifdef CONFIG_SLOB +struct kmem_cache { + unsigned int object_size;/* The original size of the object */ + unsigned int size; /* The aligned/padded/added on size */ + unsigned int align; /* Alignment as calculated */ + unsigned long flags; /* Active flags on the slab */ + const char *name; /* Slab name for sysfs */ + int refcount; /* Use counter */ + void (*ctor)(void *); /* Called on object slot creation */ + struct list_head list; /* List of all slab caches on the system */ +}; +#endif + /* * struct kmem_cache related prototypes */ diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index fbd1117fdfde..1d93f27d81de 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -27,7 +27,7 @@ struct kmem_cache { unsigned int limit; unsigned int shared; - unsigned int buffer_size; + unsigned int size; u32 reciprocal_buffer_size; /* 2) touched by every alloc & free from the backend */ @@ -52,7 +52,10 @@ struct kmem_cache { /* 4) cache creation/removal */ const char *name; - struct list_head next; + struct list_head list; + int refcount; + int object_size; + int align; /* 5) statistics */ #ifdef CONFIG_DEBUG_SLAB @@ -73,12 +76,11 @@ struct kmem_cache { /* * If debugging is enabled, then the allocator can add additional - * fields and/or padding to every object. buffer_size contains the total + * fields and/or padding to every object. size contains the total * object size including these internal fields, the following two * variables contain the offset to the user object and its size. */ int obj_offset; - int obj_size; #endif /* CONFIG_DEBUG_SLAB */ /* 6) per-cpu/per-node data, touched during every alloc/free */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index ebdcf4ba42ee..df448adb7283 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -82,7 +82,7 @@ struct kmem_cache { unsigned long flags; unsigned long min_partial; int size; /* The size of an object including meta data */ - int objsize; /* The size of an object without meta data */ + int object_size; /* The size of an object without meta data */ int offset; /* Free pointer offset. */ int cpu_partial; /* Number of per cpu partial objects to keep around */ struct kmem_cache_order_objects oo; -- cgit v1.2.3 From ac1073a61d73b6277794d2efc872eb7e1b706b5c Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:06 +0800 Subject: {nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e4f41bdebc07..6936fabe8797 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2185,6 +2185,13 @@ enum nl80211_mntr_flags { * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2211,6 +2218,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_RSSI_THRESHOLD, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit v1.2.3 From a69cc44fe9ebb806c5f3f8bd83fb4a50ca63647b Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:07 +0800 Subject: mac80211: implement the proactive PREQ generation Generate the proactive PREQ element as defined in Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012 based on the selection of dot11MeshHWMPRootMode as follow: dot11MeshHWMPRootMode (2) is proactivePREQnoPREP dot11MeshHWMPRootMode (3) is proactivePREQwithPREP The proactive PREQ is generated based on the interval defined by dot11MeshHWMProotInterval. With this change, proactive RANN element is now generated if the dot11MeshHWMPRootMode is set to (4) instead of (1). Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 98c86ff657bb..6e0601189db9 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -567,6 +567,26 @@ struct ieee80211s_hdr { #define MESH_FLAGS_AE 0x3 #define MESH_FLAGS_PS_DEEP 0x4 +/** + * enum ieee80211_preq_flags - mesh PREQ element flags + * + * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield + */ +enum ieee80211_preq_flags { + IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2, +}; + +/** + * enum ieee80211_preq_target_flags - mesh PREQ element per target flags + * + * @IEEE80211_PREQ_TO_FLAG: target only subfield + * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield + */ +enum ieee80211_preq_target_flags { + IEEE80211_PREQ_TO_FLAG = 1<<0, + IEEE80211_PREQ_USN_FLAG = 1<<2, +}; + /** * struct ieee80211_quiet_ie * @@ -1474,6 +1494,28 @@ enum { IEEE80211_PATH_METRIC_VENDOR = 255, }; +/** + * enum ieee80211_root_mode_identifier - root mesh STA mode identifier + * + * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode + * + * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default) + * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than + * this value + * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports + * the proactive PREQ with proactive PREP subfield set to 0 + * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA + * supports the proactive PREQ with proactive PREP subfield set to 1 + * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports + * the proactive RANN + */ +enum ieee80211_root_mode_identifier { + IEEE80211_ROOTMODE_NO_ROOT = 0, + IEEE80211_ROOTMODE_ROOT = 1, + IEEE80211_PROACTIVE_PREQ_NO_PREP = 2, + IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3, + IEEE80211_PROACTIVE_RANN = 4, +}; /* * IEEE 802.11-2007 7.3.2.9 Country information element -- cgit v1.2.3 From 5da43bed800770906fca24deef7ae3d456823b86 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 31 May 2012 21:28:58 -0400 Subject: tracing: Add comments for the other bits of ftrace_event_call.flags TRACE_EVENT_FL_ENABLED_BIT, TRACE_EVENT_FL_FILTERED_BIT, TRACE_EVENT_FL_RECORDED_CMD_BIT, Have comments about what they are, but: TRACE_EVENT_FL_CAP_ANY_BIT, TRACE_EVENT_FL_NO_SET_FILTER_BIT, TRACE_EVENT_FL_IGNORE_ENABLE_BIT, do not, making them second class citizens. To prevent another class warfare, these bits have protested for their right to be commented. And By Golly! I'll give them what they want! Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 176a939d1547..1aff18346c71 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -207,6 +207,9 @@ struct ftrace_event_call { * bit 1: enabled * bit 2: filter_active * bit 3: enabled cmd record + * bit 4: allow trace by non root (cap any) + * bit 5: failed to apply filter + * bit 6: ftrace internal event (do not enable) * * Changes to flags must hold the event_mutex. * -- cgit v1.2.3 From 76aaa5101fffaef12b45b4c01ed0d0528f23dedf Mon Sep 17 00:00:00 2001 From: Asias He Date: Thu, 14 Jun 2012 09:04:07 +0200 Subject: block: Drop dead function blk_abort_queue() This function was only used by btrfs code in btrfs_abort_devices() (seems in a wrong way). It was removed in commit d07eb9117050c9ed3f78296ebcc06128b52693be, So, Let's remove the dead code to avoid any confusion. Changes in v2: update commit log, btrfs_abort_devices() was removed already. Cc: Jens Axboe Cc: linux-kernel@vger.kernel.org Cc: Chris Mason Cc: linux-btrfs@vger.kernel.org Cc: David Sterba Signed-off-by: Asias He Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ba43f408baa3..07954b05b86c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -827,7 +827,6 @@ extern bool __blk_end_request_err(struct request *rq, int error); extern void blk_complete_request(struct request *); extern void __blk_complete_request(struct request *); extern void blk_abort_request(struct request *); -extern void blk_abort_queue(struct request_queue *); extern void blk_unprep_request(struct request *); /* -- cgit v1.2.3 From 0c2498f1660878339350bea8d18550b1b87ca055 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 28 Jan 2011 09:40:40 +0100 Subject: pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer Acked-by: Kurt Van Dijck Reviewed-by: Arnd Bergmann Reviewed-by: Matthias Kaehlcke Reviewed-by: Mark Brown Reviewed-by: Shawn Guo [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding --- include/linux/pwm.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 7c775751392c..1f308a13105f 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -28,4 +28,42 @@ int pwm_enable(struct pwm_device *pwm); */ void pwm_disable(struct pwm_device *pwm); +#ifdef CONFIG_PWM +struct pwm_chip; + +/** + * struct pwm_ops - PWM controller operations + * @request: optional hook for requesting a PWM + * @free: optional hook for freeing a PWM + * @config: configure duty cycles and period length for this PWM + * @enable: enable PWM output toggling + * @disable: disable PWM output toggling + * @owner: helps prevent removal of modules exporting active PWMs + */ +struct pwm_ops { + int (*request)(struct pwm_chip *chip); + void (*free)(struct pwm_chip *chip); + int (*config)(struct pwm_chip *chip, int duty_ns, + int period_ns); + int (*enable)(struct pwm_chip *chip); + void (*disable)(struct pwm_chip *chip); + struct module *owner; +}; + +/** + * struct pwm_chip - abstract a PWM + * @pwm_id: global PWM device index + * @label: PWM device label + * @ops: controller operations + */ +struct pwm_chip { + int pwm_id; + const char *label; + struct pwm_ops *ops; +}; + +int pwmchip_add(struct pwm_chip *chip); +int pwmchip_remove(struct pwm_chip *chip); +#endif + #endif /* __LINUX_PWM_H */ -- cgit v1.2.3 From f051c466cf690ac661d713d3ceb56b4efcecc853 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 14 Dec 2011 11:12:23 +0100 Subject: pwm: Allow chips to support multiple PWMs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many PWM controllers provide access to more than a single PWM output and may even share some resource among them. Allowing a PWM chip to provide multiple PWM devices enables better sharing of those resources. As a side-effect this change allows easy integration with the device tree where a given PWM can be looked up based on the PWM chip's phandle and a corresponding index. This commit modifies the PWM core to support multiple PWMs per struct pwm_chip. It achieves this in a similar way to how gpiolib works, by allowing PWM ranges to be requested dynamically (pwm_chip.base == -1) or starting at a given offset (pwm_chip.base >= 0). A chip specifies how many PWMs it controls using the npwm member. Each of the functions in the pwm_ops structure gets an additional argument that specified the PWM number (it can be converted to a per-chip index by subtracting the chip's base). The total maximum number of PWM devices is currently fixed to 1024 while the data is actually stored in a radix tree, thus saving resources if not all of them are used. Reviewed-by: Mark Brown Reviewed-by: Shawn Guo [eric@eukrea.com: fix error handling in pwmchip_add] Signed-off-by: Eric Bénard Signed-off-by: Thierry Reding --- include/linux/pwm.h | 71 +++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 58 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 1f308a13105f..57103911f4c7 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -31,6 +31,33 @@ void pwm_disable(struct pwm_device *pwm); #ifdef CONFIG_PWM struct pwm_chip; +enum { + PWMF_REQUESTED = 1 << 0, + PWMF_ENABLED = 1 << 1, +}; + +struct pwm_device { + const char *label; + unsigned long flags; + unsigned int hwpwm; + unsigned int pwm; + struct pwm_chip *chip; + void *chip_data; + + unsigned int period; /* in nanoseconds */ +}; + +static inline void pwm_set_period(struct pwm_device *pwm, unsigned int period) +{ + if (pwm) + pwm->period = period; +} + +static inline unsigned int pwm_get_period(struct pwm_device *pwm) +{ + return pwm ? pwm->period : 0; +} + /** * struct pwm_ops - PWM controller operations * @request: optional hook for requesting a PWM @@ -41,29 +68,47 @@ struct pwm_chip; * @owner: helps prevent removal of modules exporting active PWMs */ struct pwm_ops { - int (*request)(struct pwm_chip *chip); - void (*free)(struct pwm_chip *chip); - int (*config)(struct pwm_chip *chip, int duty_ns, - int period_ns); - int (*enable)(struct pwm_chip *chip); - void (*disable)(struct pwm_chip *chip); + int (*request)(struct pwm_chip *chip, + struct pwm_device *pwm); + void (*free)(struct pwm_chip *chip, + struct pwm_device *pwm); + int (*config)(struct pwm_chip *chip, + struct pwm_device *pwm, + int duty_ns, int period_ns); + int (*enable)(struct pwm_chip *chip, + struct pwm_device *pwm); + void (*disable)(struct pwm_chip *chip, + struct pwm_device *pwm); struct module *owner; }; /** - * struct pwm_chip - abstract a PWM - * @pwm_id: global PWM device index - * @label: PWM device label - * @ops: controller operations + * struct pwm_chip - abstract a PWM controller + * @dev: device providing the PWMs + * @list: list node for internal use + * @ops: callbacks for this PWM controller + * @base: number of first PWM controlled by this chip + * @npwm: number of PWMs controlled by this chip + * @pwms: array of PWM devices allocated by the framework */ struct pwm_chip { - int pwm_id; - const char *label; - struct pwm_ops *ops; + struct device *dev; + struct list_head list; + const struct pwm_ops *ops; + int base; + unsigned int npwm; + + struct pwm_device *pwms; }; +int pwm_set_chip_data(struct pwm_device *pwm, void *data); +void *pwm_get_chip_data(struct pwm_device *pwm); + int pwmchip_add(struct pwm_chip *chip); int pwmchip_remove(struct pwm_chip *chip); +struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, + unsigned int index, + const char *label); #endif #endif /* __LINUX_PWM_H */ -- cgit v1.2.3 From 62099abf67a20cfb98d4c031fb1925e10a78ee1b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 26 Mar 2012 09:31:48 +0200 Subject: pwm: Add debugfs interface This commit adds a debugfs interface that can be used to list the current internal state of the PWM devices registered with the PWM framework. Reviewed-by: Mark Brown Reviewed-by: Shawn Guo Signed-off-by: Thierry Reding --- include/linux/pwm.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 57103911f4c7..047cd5351a3b 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -2,6 +2,7 @@ #define __LINUX_PWM_H struct pwm_device; +struct seq_file; /* * pwm_request - request a PWM device @@ -65,6 +66,7 @@ static inline unsigned int pwm_get_period(struct pwm_device *pwm) * @config: configure duty cycles and period length for this PWM * @enable: enable PWM output toggling * @disable: disable PWM output toggling + * @dbg_show: optional routine to show contents in debugfs * @owner: helps prevent removal of modules exporting active PWMs */ struct pwm_ops { @@ -79,6 +81,10 @@ struct pwm_ops { struct pwm_device *pwm); void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm); +#ifdef CONFIG_DEBUG_FS + void (*dbg_show)(struct pwm_chip *chip, + struct seq_file *s); +#endif struct module *owner; }; -- cgit v1.2.3 From 8138d2ddbcca2a100482dac390133f83c5a60f94 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 26 Mar 2012 08:42:48 +0200 Subject: pwm: Add table-based lookup for static mappings In order to get rid of the global namespace for PWM devices, this commit provides an alternative method, similar to that of the regulator or clock frameworks, for registering a static mapping for PWM devices. This works by providing a table with a provider/consumer map in the board setup code. With the new pwm_get() and pwm_put() functions available, usage of pwm_request() and pwm_free() becomes deprecated. Reviewed-by: Shawn Guo Reviewed-by: Mark Brown Signed-off-by: Thierry Reding --- include/linux/pwm.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 047cd5351a3b..2947a4fea6ad 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -115,6 +115,28 @@ int pwmchip_remove(struct pwm_chip *chip); struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, unsigned int index, const char *label); + +struct pwm_device *pwm_get(struct device *dev, const char *consumer); +void pwm_put(struct pwm_device *pwm); + +struct pwm_lookup { + struct list_head list; + const char *provider; + unsigned int index; + const char *dev_id; + const char *con_id; +}; + +#define PWM_LOOKUP(_provider, _index, _dev_id, _con_id) \ + { \ + .provider = _provider, \ + .index = _index, \ + .dev_id = _dev_id, \ + .con_id = _con_id, \ + } + +void pwm_add_table(struct pwm_lookup *table, size_t num); + #endif #endif /* __LINUX_PWM_H */ -- cgit v1.2.3 From bd3d5500f0c41a30149cb184362716096a17bc75 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 13 Apr 2012 16:18:34 +0200 Subject: dt: Add empty of_property_match_string() function This commit adds an empty of_property_match_string() function for !CONFIG_OF builds. Acked-by: Rob Herring Signed-off-by: Thierry Reding --- include/linux/of.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 2ec1083af7ff..597e571110a2 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -377,6 +377,13 @@ static inline int of_property_read_u64(const struct device_node *np, return -ENOSYS; } +static inline int of_property_match_string(struct device_node *np, + const char *propname, + const char *string) +{ + return -ENOSYS; +} + static inline struct device_node *of_parse_phandle(struct device_node *np, const char *phandle_name, int index) -- cgit v1.2.3 From e05e5070f0ec2557d2d2ff3655ba03f29e297151 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 13 Apr 2012 16:19:21 +0200 Subject: dt: Add empty of_parse_phandle_with_args() function This commit adds an empty of_parse_phandle_with_args() function for !CONFIG_OF builds. Acked-by: Rob Herring Signed-off-by: Thierry Reding --- include/linux/of.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 597e571110a2..d5dd5c06efd3 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -391,6 +391,15 @@ static inline struct device_node *of_parse_phandle(struct device_node *np, return NULL; } +static inline int of_parse_phandle_with_args(struct device_node *np, + const char *list_name, + const char *cells_name, + int index, + struct of_phandle_args *out_args) +{ + return -ENOSYS; +} + static inline int of_alias_get_id(struct device_node *np, const char *stem) { return -ENOSYS; -- cgit v1.2.3 From 7299ab70e68e20e70cb45fe4ab4b6029fe964acd Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 14 Dec 2011 11:10:32 +0100 Subject: pwm: Add device tree support This patch adds helpers to support device tree bindings for the generic PWM API. Device tree binding documentation for PWM controllers is also provided. Acked-by: Arnd Bergmann Reviewed-by: Shawn Guo Signed-off-by: Thierry Reding --- include/linux/pwm.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 2947a4fea6ad..21d076c5089e 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -1,6 +1,8 @@ #ifndef __LINUX_PWM_H #define __LINUX_PWM_H +#include + struct pwm_device; struct seq_file; @@ -105,6 +107,10 @@ struct pwm_chip { unsigned int npwm; struct pwm_device *pwms; + + struct pwm_device * (*of_xlate)(struct pwm_chip *pc, + const struct of_phandle_args *args); + unsigned int of_pwm_n_cells; }; int pwm_set_chip_data(struct pwm_device *pwm, void *data); -- cgit v1.2.3 From 7eb9ae0799b1e9f0b77733b432bc5f6f055b020b Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 14 Jun 2012 18:28:49 -0700 Subject: irq/apic: Use config_enabled(CONFIG_SMP) checks to clean up irq_set_affinity() for UP Move the ->irq_set_affinity() routines out of the #ifdef CONFIG_SMP sections and use config_enabled(CONFIG_SMP) checks inside those routines. Thus making those routines simple null stubs for !CONFIG_SMP and retaining those routines with no additional runtime overhead for CONFIG_SMP kernels. Cleans up the ifdef CONFIG_SMP in and around routines related to irq_set_affinity in io_apic and irq_remapping subsystems. Signed-off-by: Suresh Siddha Cc: torvalds@linux-foundation.org Cc: joerg.roedel@amd.com Cc: Sam Ravnborg Cc: Paul Gortmaker Link: http://lkml.kernel.org/r/1339723729.3475.63.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar --- include/linux/irq.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index 61f5cec031e0..47a937cd84af 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -150,9 +150,7 @@ struct irq_data { void *handler_data; void *chip_data; struct msi_desc *msi_desc; -#ifdef CONFIG_SMP cpumask_var_t affinity; -#endif }; /* -- cgit v1.2.3 From efd68e7254503f3207805f674a1ea1d743f5dfe2 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:33 -0700 Subject: devicetree: add helper inline for retrieving a node's full name The pattern (np ? np->full_name : "") is rather common in the kernel, but can also make for quite long lines. This patch adds a new inline function, of_node_full_name() so that the test for a valid node pointer doesn't need to be open coded at all call sites. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner --- include/linux/of.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 2ec1083af7ff..1012377cae92 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -163,6 +163,11 @@ static inline int of_node_to_nid(struct device_node *np) { return -1; } #define of_node_to_nid of_node_to_nid #endif +static inline const char* of_node_full_name(struct device_node *np) +{ + return np ? np->full_name : ""; +} + extern struct device_node *of_find_node_by_name(struct device_node *from, const char *name); #define for_each_node_by_name(dn, name) \ @@ -303,6 +308,11 @@ const char *of_prop_next_string(struct property *prop, const char *cur); #else /* CONFIG_OF */ +static inline const char* of_node_full_name(struct device_node *np) +{ + return ""; +} + static inline bool of_have_populated_dt(void) { return false; -- cgit v1.2.3 From 5ca4db61e859526b2dbee3bcea3626d3de49a0b2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 Jun 2012 22:04:34 -0700 Subject: irqdomain: Simple NUMA awareness. While common irqdesc allocation is node aware, the irqdomain code is not. Presently we observe a number of regressions/inconsistencies on NUMA-capable platforms: - Platforms using irqdomains with legacy mappings, where the irq_descs are allocated node-local and the irqdomain data structure is not. - Drivers implementing irqdomains will lose node locality regardless of the underlying struct device's node id. This plugs in NUMA node id proliferation across the various allocation callsites by way of_node_to_nid() node lookup. While of_node_to_nid() does the right thing for OF-capable platforms it doesn't presently handle the non-DT case. This is trivially dealt with by simply wraping in to numa_node_id() unconditionally. Signed-off-by: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring Signed-off-by: Grant Likely --- include/linux/of.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 1012377cae92..76930ee78db5 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -158,11 +159,6 @@ static inline unsigned long of_read_ulong(const __be32 *cell, int size) #define OF_BAD_ADDR ((u64)-1) -#ifndef of_node_to_nid -static inline int of_node_to_nid(struct device_node *np) { return -1; } -#define of_node_to_nid of_node_to_nid -#endif - static inline const char* of_node_full_name(struct device_node *np) { return np ? np->full_name : ""; @@ -412,6 +408,15 @@ static inline int of_machine_is_compatible(const char *compat) while (0) #endif /* CONFIG_OF */ +#ifndef of_node_to_nid +static inline int of_node_to_nid(struct device_node *np) +{ + return numa_node_id(); +} + +#define of_node_to_nid of_node_to_nid +#endif + /** * of_property_read_bool - Findfrom a property * @np: device node from which the property value is to be read. -- cgit v1.2.3 From 33e0c249801c6913b2bd102683ab65ab61e12952 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Fri, 15 Jun 2012 19:25:25 +0200 Subject: iio: iio/machine.h typo Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/machine.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h index 0b1f19bfdc44..400a453ff67b 100644 --- a/include/linux/iio/machine.h +++ b/include/linux/iio/machine.h @@ -14,7 +14,7 @@ * This is matched against the datasheet_name element * of struct iio_chan_spec. * @consumer_dev_name: Name to uniquely identify the consumer device. - * @consumer_channel: Unique name used to idenitify the channel on the + * @consumer_channel: Unique name used to identify the channel on the * consumer side. */ struct iio_map { -- cgit v1.2.3 From fb1c4bcd721fcc30d6e43f60a244483dc0d07056 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Fri, 15 Jun 2012 19:25:28 +0200 Subject: iio: iio/events.h typos Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/events.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h index b5acbf93c5da..13ce220c7003 100644 --- a/include/linux/iio/events.h +++ b/include/linux/iio/events.h @@ -46,7 +46,7 @@ enum iio_event_direction { * @diff: Whether the event is for an differential channel or not. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. * @direction: Direction of the event. One of enum iio_event_direction. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @chan: Channel number for non-differential channels. * @chan1: First channel number for differential channels. * @chan2: Second channel number for differential channels. @@ -69,7 +69,7 @@ enum iio_event_direction { * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ @@ -81,7 +81,7 @@ enum iio_event_direction { * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ -- cgit v1.2.3 From 1afc56794e03229fa53cfa3c5012704d226e1dec Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 7 Jun 2012 12:11:50 +0200 Subject: netfilter: nf_ct_helper: implement variable length helper private data This patch uses the new variable length conntrack extensions. Instead of using union nf_conntrack_help that contain all the helper private data information, we allocate variable length area to store the private helper data. This patch includes the modification of all existing helpers. It also includes a couple of include header to avoid compilation warnings. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_sip.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index 0ce91d56a5f2..0dfc8b7210a3 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -2,6 +2,8 @@ #define __NF_CONNTRACK_SIP_H__ #ifdef __KERNEL__ +#include + #define SIP_PORT 5060 #define SIP_TIMEOUT 3600 -- cgit v1.2.3 From 9cb0176654a7dc33a32af8a0bc9e0b2f9f9ebb0f Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 7 Jun 2012 12:13:39 +0200 Subject: netfilter: add glue code to integrate nfnetlink_queue and ctnetlink This patch allows you to include the conntrack information together with the packet that is sent to user-space via NFQUEUE. Previously, there was no integration between ctnetlink and nfnetlink_queue. If you wanted to access conntrack information from your libnetfilter_queue program, you required to query ctnetlink from user-space to obtain it. Thus, delaying the packet processing even more. Including the conntrack information is optional, you can set it via NFQA_CFG_F_CONNTRACK flag with the new NFQA_CFG_FLAGS attribute. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter.h | 10 ++++++++++ include/linux/netfilter/nfnetlink_queue.h | 3 +++ 2 files changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 4541f33dbfc3..ba65bfbd7f74 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -393,6 +393,16 @@ nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family) extern void (*ip_ct_attach)(struct sk_buff *, struct sk_buff *) __rcu; extern void nf_ct_attach(struct sk_buff *, struct sk_buff *); extern void (*nf_ct_destroy)(struct nf_conntrack *) __rcu; + +struct nf_conn; +struct nlattr; + +struct nfq_ct_hook { + size_t (*build_size)(const struct nf_conn *ct); + int (*build)(struct sk_buff *skb, struct nf_conn *ct); + int (*parse)(const struct nlattr *attr, struct nf_conn *ct); +}; +extern struct nfq_ct_hook *nfq_ct_hook; #else static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {} #endif diff --git a/include/linux/netfilter/nfnetlink_queue.h b/include/linux/netfilter/nfnetlink_queue.h index a6c1ddac05cc..e0d8fd8d4d24 100644 --- a/include/linux/netfilter/nfnetlink_queue.h +++ b/include/linux/netfilter/nfnetlink_queue.h @@ -42,6 +42,8 @@ enum nfqnl_attr_type { NFQA_IFINDEX_PHYSOUTDEV, /* __u32 ifindex */ NFQA_HWADDR, /* nfqnl_msg_packet_hw */ NFQA_PAYLOAD, /* opaque data payload */ + NFQA_CT, /* nf_conntrack_netlink.h */ + NFQA_CT_INFO, /* enum ip_conntrack_info */ __NFQA_MAX }; @@ -92,5 +94,6 @@ enum nfqnl_attr_config { /* Flags for NFQA_CFG_FLAGS */ #define NFQA_CFG_F_FAIL_OPEN (1 << 0) +#define NFQA_CFG_F_CONNTRACK (1 << 1) #endif /* _NFNETLINK_QUEUE_H */ -- cgit v1.2.3 From 8c88f87cb27ad09086940bdd3e6955e5325ec89a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 7 Jun 2012 13:31:25 +0200 Subject: netfilter: nfnetlink_queue: add NAT TCP sequence adjustment if packet mangled User-space programs that receive traffic via NFQUEUE may mangle packets. If NAT is enabled, this usually puzzles sequence tracking, leading to traffic disruptions. With this patch, nfnl_queue will make the corresponding NAT TCP sequence adjustment if: 1) The packet has been mangled, 2) the NFQA_CFG_F_CONNTRACK flag has been set, and 3) NAT is detected. There are some records on the Internet complaning about this issue: http://stackoverflow.com/questions/260757/packet-mangling-utilities-besides-iptables By now, we only support TCP since we have no helpers for DCCP or SCTP. Better to add this if we ever have some helper over those layer 4 protocols. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index ba65bfbd7f74..dca19e61b30a 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -401,6 +401,8 @@ struct nfq_ct_hook { size_t (*build_size)(const struct nf_conn *ct); int (*build)(struct sk_buff *skb, struct nf_conn *ct); int (*parse)(const struct nlattr *attr, struct nf_conn *ct); + void (*seq_adjust)(struct sk_buff *skb, struct nf_conn *ct, + u32 ctinfo, int off); }; extern struct nfq_ct_hook *nfq_ct_hook; #else -- cgit v1.2.3 From ae243bee397102c51fbf9db440eca3b077e0e702 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 7 Jun 2012 14:19:42 +0200 Subject: netfilter: ctnetlink: add CTA_HELP_INFO attribute This attribute can be used to modify and to dump the internal protocol information. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nfnetlink_conntrack.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index e58e4b93c108..768883370080 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -191,6 +191,7 @@ enum ctattr_expect_nat { enum ctattr_help { CTA_HELP_UNSPEC, CTA_HELP_NAME, + CTA_HELP_INFO, __CTA_HELP_MAX }; #define CTA_HELP_MAX (__CTA_HELP_MAX - 1) -- cgit v1.2.3 From 12f7a505331e6b2754684b509f2ac8f0011ce644 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 13 May 2012 21:44:54 +0200 Subject: netfilter: add user-space connection tracking helper infrastructure There are good reasons to supports helpers in user-space instead: * Rapid connection tracking helper development, as developing code in user-space is usually faster. * Reliability: A buggy helper does not crash the kernel. Moreover, we can monitor the helper process and restart it in case of problems. * Security: Avoid complex string matching and mangling in kernel-space running in privileged mode. Going further, we can even think about running user-space helpers as a non-root process. * Extensibility: It allows the development of very specific helpers (most likely non-standard proprietary protocols) that are very likely not to be accepted for mainline inclusion in the form of kernel-space connection tracking helpers. This patch adds the infrastructure to allow the implementation of user-space conntrack helpers by means of the new nfnetlink subsystem `nfnetlink_cthelper' and the existing queueing infrastructure (nfnetlink_queue). I had to add the new hook NF_IP6_PRI_CONNTRACK_HELPER to register ipv[4|6]_helper which results from splitting ipv[4|6]_confirm into two pieces. This change is required not to break NAT sequence adjustment and conntrack confirmation for traffic that is enqueued to our user-space conntrack helpers. Basic operation, in a few steps: 1) Register user-space helper by means of `nfct': nfct helper add ftp inet tcp [ It must be a valid existing helper supported by conntrack-tools ] 2) Add rules to enable the FTP user-space helper which is used to track traffic going to TCP port 21. For locally generated packets: iptables -I OUTPUT -t raw -p tcp --dport 21 -j CT --helper ftp For non-locally generated packets: iptables -I PREROUTING -t raw -p tcp --dport 21 -j CT --helper ftp 3) Run the test conntrackd in helper mode (see example files under doc/helper/conntrackd.conf conntrackd 4) Generate FTP traffic going, if everything is OK, then conntrackd should create expectations (you can check that with `conntrack': conntrack -E expect [NEW] 301 proto=6 src=192.168.1.136 dst=130.89.148.12 sport=0 dport=54037 mask-src=255.255.255.255 mask-dst=255.255.255.255 sport=0 dport=65535 master-src=192.168.1.136 master-dst=130.89.148.12 sport=57127 dport=21 class=0 helper=ftp [DESTROY] 301 proto=6 src=192.168.1.136 dst=130.89.148.12 sport=0 dport=54037 mask-src=255.255.255.255 mask-dst=255.255.255.255 sport=0 dport=65535 master-src=192.168.1.136 master-dst=130.89.148.12 sport=57127 dport=21 class=0 helper=ftp This confirms that our test helper is receiving packets including the conntrack information, and adding expectations in kernel-space. The user-space helper can also store its private tracking information in the conntrack structure in the kernel via the CTA_HELP_INFO. The kernel will consider this a binary blob whose layout is unknown. This information will be included in the information that is transfered to user-space via glue code that integrates nfnetlink_queue and ctnetlink. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/Kbuild | 1 + include/linux/netfilter/nfnetlink.h | 3 +- include/linux/netfilter/nfnetlink_cthelper.h | 55 ++++++++++++++++++++++++++++ include/linux/netfilter_ipv4.h | 1 + include/linux/netfilter_ipv6.h | 1 + 5 files changed, 60 insertions(+), 1 deletion(-) create mode 100644 include/linux/netfilter/nfnetlink_cthelper.h (limited to 'include/linux') diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index 1697036336b6..874ae8f2706b 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -10,6 +10,7 @@ header-y += nfnetlink.h header-y += nfnetlink_acct.h header-y += nfnetlink_compat.h header-y += nfnetlink_conntrack.h +header-y += nfnetlink_cthelper.h header-y += nfnetlink_cttimeout.h header-y += nfnetlink_log.h header-y += nfnetlink_queue.h diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index a1048c1587d1..18341cdb2443 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -50,7 +50,8 @@ struct nfgenmsg { #define NFNL_SUBSYS_IPSET 6 #define NFNL_SUBSYS_ACCT 7 #define NFNL_SUBSYS_CTNETLINK_TIMEOUT 8 -#define NFNL_SUBSYS_COUNT 9 +#define NFNL_SUBSYS_CTHELPER 9 +#define NFNL_SUBSYS_COUNT 10 #ifdef __KERNEL__ diff --git a/include/linux/netfilter/nfnetlink_cthelper.h b/include/linux/netfilter/nfnetlink_cthelper.h new file mode 100644 index 000000000000..33659f6fad3e --- /dev/null +++ b/include/linux/netfilter/nfnetlink_cthelper.h @@ -0,0 +1,55 @@ +#ifndef _NFNL_CTHELPER_H_ +#define _NFNL_CTHELPER_H_ + +#define NFCT_HELPER_STATUS_DISABLED 0 +#define NFCT_HELPER_STATUS_ENABLED 1 + +enum nfnl_acct_msg_types { + NFNL_MSG_CTHELPER_NEW, + NFNL_MSG_CTHELPER_GET, + NFNL_MSG_CTHELPER_DEL, + NFNL_MSG_CTHELPER_MAX +}; + +enum nfnl_cthelper_type { + NFCTH_UNSPEC, + NFCTH_NAME, + NFCTH_TUPLE, + NFCTH_QUEUE_NUM, + NFCTH_POLICY, + NFCTH_PRIV_DATA_LEN, + NFCTH_STATUS, + __NFCTH_MAX +}; +#define NFCTH_MAX (__NFCTH_MAX - 1) + +enum nfnl_cthelper_policy_type { + NFCTH_POLICY_SET_UNSPEC, + NFCTH_POLICY_SET_NUM, + NFCTH_POLICY_SET, + NFCTH_POLICY_SET1 = NFCTH_POLICY_SET, + NFCTH_POLICY_SET2, + NFCTH_POLICY_SET3, + NFCTH_POLICY_SET4, + __NFCTH_POLICY_SET_MAX +}; +#define NFCTH_POLICY_SET_MAX (__NFCTH_POLICY_SET_MAX - 1) + +enum nfnl_cthelper_pol_type { + NFCTH_POLICY_UNSPEC, + NFCTH_POLICY_NAME, + NFCTH_POLICY_EXPECT_MAX, + NFCTH_POLICY_EXPECT_TIMEOUT, + __NFCTH_POLICY_MAX +}; +#define NFCTH_POLICY_MAX (__NFCTH_POLICY_MAX - 1) + +enum nfnl_cthelper_tuple_type { + NFCTH_TUPLE_UNSPEC, + NFCTH_TUPLE_L3PROTONUM, + NFCTH_TUPLE_L4PROTONUM, + __NFCTH_TUPLE_MAX, +}; +#define NFCTH_TUPLE_MAX (__NFCTH_TUPLE_MAX - 1) + +#endif /* _NFNL_CTHELPER_H */ diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index fa0946c549d3..e2b12801378d 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -66,6 +66,7 @@ enum nf_ip_hook_priorities { NF_IP_PRI_SECURITY = 50, NF_IP_PRI_NAT_SRC = 100, NF_IP_PRI_SELINUX_LAST = 225, + NF_IP_PRI_CONNTRACK_HELPER = 300, NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, NF_IP_PRI_LAST = INT_MAX, }; diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 57c025127f1d..7c8a513ce7a3 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -71,6 +71,7 @@ enum nf_ip6_hook_priorities { NF_IP6_PRI_SECURITY = 50, NF_IP6_PRI_NAT_SRC = 100, NF_IP6_PRI_SELINUX_LAST = 225, + NF_IP6_PRI_CONNTRACK_HELPER = 300, NF_IP6_PRI_LAST = INT_MAX, }; -- cgit v1.2.3 From fbebb9fd22581b6422d60669c4ff86ce99d6cdba Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sat, 16 Jun 2012 14:40:22 -0600 Subject: PCI: add infrastructure for devices with broken INTx masking pci_intx_mask_supported() assumes INTx masking is supported if the PCI_COMMAND_INTX_DISABLE bit is writable. But when that bit is set, some devices don't actually mask INTx or update PCI_STATUS_INTERRUPT as we expect. This patch adds a way for quirks to identify these broken devices. [bhelgaas: split out from Chelsio quirk addition] Signed-off-by: Jan Kiszka Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..40a039f1dffb 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -324,6 +324,7 @@ struct pci_dev { unsigned int is_hotplug_bridge:1; unsigned int __aer_firmware_first_valid:1; unsigned int __aer_firmware_first:1; + unsigned int broken_intx_masking:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ -- cgit v1.2.3 From 6f0b2c696ca340cc2da381fe693fda3f8fdb2149 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Mon, 11 Jun 2012 17:41:08 +0530 Subject: regulator: Add ramp_delay configuration to constraints For some hardwares ramp_delay for BUCKs is a configurable parameter which can be configured through DT or board file.This patch adds ramp_delay to regulator constraints and allow user to configure it for regulators which supports this feature, through DT or board file. It will provide two ways of setting the ramp_delay for a regulator: First, by setting it as constraints in board file(for configurable regulators) and set_machine_constraints() will take care of setting it on hardware by calling(the provided) .set_ramp_delay() operation(callback). Second, by setting it as data in regulator_desc(as fixed/default ramp_delay rate) for a regulator in driver. regulator_set_voltage_time_sel() will give preference to constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly users should also take care accordingly while refering ramp_delay rate(in case of implementing their private .set_voltage_time_sel() callbacks for different regulators). [Rewrote subject for 80 columns -- broonie] Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 3 +++ include/linux/regulator/machine.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ae5c25379237..ddc155d262da 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -67,6 +67,8 @@ enum regulator_status { * * @enable_time: Time taken for the regulator voltage output voltage to * stabilise after being enabled, in microseconds. + * @set_ramp_delay: Set the ramp delay for the regulator. The driver should + * select ramp delay equal to or less than(closest) ramp_delay. * @set_voltage_time_sel: Time taken for the regulator voltage output voltage * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the @@ -113,6 +115,7 @@ struct regulator_ops { /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay); int (*set_voltage_time_sel) (struct regulator_dev *, unsigned int old_selector, unsigned int new_selector); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index b02108446be7..5f37ad3cc172 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,6 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. + * @ramp_delay: Time to settle down after voltage change (unit: mV/us) */ struct regulation_constraints { @@ -125,6 +126,8 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; + unsigned int ramp_delay; + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ -- cgit v1.2.3 From 6863ca6227598d15c372f1e03449bbb4cfbcca7f Mon Sep 17 00:00:00 2001 From: Krystian Garbaciak Date: Fri, 15 Jun 2012 11:23:56 +0100 Subject: regmap: Add support for register indirect addressing. Devices with register paging or indirectly accessed registers can configure register mapping to map those on virtual address range. During access to virtually mapped register range, indirect addressing is processed automatically, in following steps: 1. selector for page or indirect register is updated (when needed); 2. register in data window is accessed. Configuration should provide minimum and maximum register for virtual range, details of selector field for page selection, minimum and maximum register of data window for indirect access. Virtual range registers are managed by cache as well as direct access registers. In order to make indirect access more efficient, selector register should be declared as non-volatile, if possible. struct regmap_config is extended with the following: struct regmap_range_cfg *ranges; unsigned int n_ranges; [Also reordered debugfs init to later on since the cleanup code was conflicting with the new cleanup code for ranges anyway -- broonie] Signed-off-by: Krystian Garbaciak Signed-off-by: Mark Brown --- include/linux/regmap.h | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 56af22ec9aba..5f69d4ad3eb1 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -14,12 +14,14 @@ */ #include +#include struct module; struct device; struct i2c_client; struct spi_device; struct regmap; +struct regmap_range_cfg; /* An enum of all the supported cache types */ enum regcache_type { @@ -84,6 +86,9 @@ struct reg_default { * @reg_defaults_raw: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. + * + * @ranges: Array of configuration entries for virtual address ranges. + * @num_ranges: Number of range configuration entries. */ struct regmap_config { const char *name; @@ -109,6 +114,40 @@ struct regmap_config { u8 write_flag_mask; bool use_single_rw; + + const struct regmap_range_cfg *ranges; + unsigned int n_ranges; +}; + +/** + * Configuration for indirectly accessed or paged registers. + * Registers, mapped to this virtual range, are accessed in two steps: + * 1. page selector register update; + * 2. access through data window registers. + * + * @range_min: Address of the lowest register address in virtual range. + * @range_max: Address of the highest register in virtual range. + * + * @page_sel_reg: Register with selector field. + * @page_sel_mask: Bit shift for selector value. + * @page_sel_shift: Bit mask for selector value. + * + * @window_start: Address of first (lowest) register in data window. + * @window_len: Number of registers in data window. + */ +struct regmap_range_cfg { + /* Registers of virtual address range */ + unsigned int range_min; + unsigned int range_max; + + /* Page selector for indirect addressing */ + unsigned int selector_reg; + unsigned int selector_mask; + int selector_shift; + + /* Data window (per each page) */ + unsigned int window_start; + unsigned int window_len; }; typedef int (*regmap_hw_write)(void *context, const void *data, -- cgit v1.2.3 From 3be330bf8860dc6079da5acc81295787a04cf4c9 Mon Sep 17 00:00:00 2001 From: Jenny TC Date: Wed, 9 May 2012 20:36:47 +0530 Subject: power_supply: Register battery as a thermal zone Battery and charger contribute to Thermals in most of the embedded devices. So, it makes sense to identify them as Thermal zones in a particular platform. This patch registers a thermal zone if the power supply is reporting a temperature property. The thermal zone will be used by platform's thermal management solution. Signed-off-by: Jenny TC Signed-off-by: Anton Vorontsov --- include/linux/power_supply.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 3b912bee28d1..59ed2dd9dba9 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -173,6 +173,9 @@ struct power_supply { /* private */ struct device *dev; struct work_struct changed_work; +#ifdef CONFIG_THERMAL + struct thermal_zone_device *tzd; +#endif #ifdef CONFIG_LEDS_TRIGGERS struct led_trigger *charging_full_trig; -- cgit v1.2.3 From ea38d13fd1666bc030cb1c0feec5b0da2f89f9b2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 18 Jun 2012 14:03:16 +0800 Subject: regulator: core: Change the unit of ramp_delay from mV/uS to uV/uS This change makes it possible to set ramp_delay with 0.xxx mV/uS without truncation issue. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 +- include/linux/regulator/machine.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ddc155d262da..84f999ed394b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -173,7 +173,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5f37ad3cc172..40dd0a394cfa 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,7 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) */ struct regulation_constraints { -- cgit v1.2.3 From 0cda4c023132aa93f2dd94811061f812e88daf4c Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 15 Jun 2012 14:31:33 +0800 Subject: perf: Introduce perf_pmu_migrate_context() Originally from Peter Zijlstra. The helper migrates perf events from one cpu to another cpu. Signed-off-by: Zheng Yan Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1339741902-8449-5-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 1ce887abcc5c..76c5c8b724a7 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1107,6 +1107,8 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, struct task_struct *task, perf_overflow_handler_t callback, void *context); +extern void perf_pmu_migrate_context(struct pmu *pmu, + int src_cpu, int dst_cpu); extern u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running); -- cgit v1.2.3 From 7c94ee2e0917b2ea56498bff939c8aa55da27207 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 15 Jun 2012 14:31:37 +0800 Subject: perf/x86: Add Intel Nehalem and Sandy Bridge-EP uncore support The uncore subsystem in Sandy Bridge-EP consists of 8 components: Ubox, Cacheing Agent, Home Agent, Memory controller, Power Control, QPI Link Layer, R2PCIe, R3QPI. Signed-off-by: Zheng Yan Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1339741902-8449-9-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar --- include/linux/pci_ids.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ab741b0d0074..5f187026b812 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2755,6 +2755,17 @@ #define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27 #define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e #define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f +#define PCI_DEVICE_ID_INTEL_UNC_HA 0x3c46 +#define PCI_DEVICE_ID_INTEL_UNC_IMC0 0x3cb0 +#define PCI_DEVICE_ID_INTEL_UNC_IMC1 0x3cb1 +#define PCI_DEVICE_ID_INTEL_UNC_IMC2 0x3cb4 +#define PCI_DEVICE_ID_INTEL_UNC_IMC3 0x3cb5 +#define PCI_DEVICE_ID_INTEL_UNC_QPI0 0x3c41 +#define PCI_DEVICE_ID_INTEL_UNC_QPI1 0x3c42 +#define PCI_DEVICE_ID_INTEL_UNC_R2PCIE 0x3c43 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI0 0x3c44 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI1 0x3c45 +#define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX 0x3ce0 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 -- cgit v1.2.3 From ace3d8614ab0e6544f5f85921085b55b915fe9aa Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:14 +0200 Subject: HID: uhid: add internal message buffer When receiving messages from the HID subsystem, we need to process them and store them in an internal buffer so user-space can read() on the char device to retrieve the messages. This adds a static buffer for 32 messages to each uhid device. Each message is dynamically allocated so the uhid_device structure does not get too big. uhid_queue() adds a message to the buffer. If the buffer is full, the message is discarded. uhid_queue_event() is an helper for messages without payload. This also adds a public header: uhid.h. It contains the declarations for the user-space API. It is built around "struct uhid_event" which contains a type field which specifies the event type and each event can then add a variable-length payload. For now, there is only a dummy event but later patches will add new event types and payloads. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/Kbuild | 1 + include/linux/uhid.h | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 include/linux/uhid.h (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 39737839ce29..8cdabecfbe27 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -373,6 +373,7 @@ header-y += tty.h header-y += types.h header-y += udf_fs_i.h header-y += udp.h +header-y += uhid.h header-y += uinput.h header-y += uio.h header-y += ultrasound.h diff --git a/include/linux/uhid.h b/include/linux/uhid.h new file mode 100644 index 000000000000..16b786a2b18f --- /dev/null +++ b/include/linux/uhid.h @@ -0,0 +1,33 @@ +#ifndef __UHID_H_ +#define __UHID_H_ + +/* + * User-space I/O driver support for HID subsystem + * Copyright (c) 2012 David Herrmann + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* + * Public header for user-space communication. We try to keep every structure + * aligned but to be safe we also use __attribute__((__packed__)). Therefore, + * the communication should be ABI compatible even between architectures. + */ + +#include +#include + +enum uhid_event_type { + UHID_DUMMY, +}; + +struct uhid_event { + __u32 type; +} __attribute__((__packed__)); + +#endif /* __UHID_H_ */ -- cgit v1.2.3 From d365c6cfd337a2bccdc65eacce271a311ea1072c Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:18 +0200 Subject: HID: uhid: add UHID_CREATE and UHID_DESTROY events UHID_CREATE and UHID_DESTROY are used to create and destroy a device on an open uhid char-device. Internally, we allocate and register an HID device with the HID core and immediately start the device. From now on events may be received or sent to the device. The UHID_CREATE event has a payload similar to the data used by Bluetooth-HIDP when creating a new connection. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/uhid.h | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/uhid.h b/include/linux/uhid.h index 16b786a2b18f..8a493e604a77 100644 --- a/include/linux/uhid.h +++ b/include/linux/uhid.h @@ -23,11 +23,30 @@ #include enum uhid_event_type { - UHID_DUMMY, + UHID_CREATE, + UHID_DESTROY, }; +struct uhid_create_req { + __u8 name[128]; + __u8 phys[64]; + __u8 uniq[64]; + __u8 __user *rd_data; + __u16 rd_size; + + __u16 bus; + __u32 vendor; + __u32 product; + __u32 version; + __u32 country; +} __attribute__((__packed__)); + struct uhid_event { __u32 type; + + union { + struct uhid_create_req create; + } u; } __attribute__((__packed__)); #endif /* __UHID_H_ */ -- cgit v1.2.3 From 5e87a36ae375297b71cc21ac7e32846832bcfb34 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:19 +0200 Subject: HID: uhid: allow feeding input data into uhid devices This adds a new event type UHID_INPUT which allows user-space to feed raw HID reports into the HID subsystem. We copy the data into kernel memory and directly feed it into the HID core. There is no error handling of the events couldn't be parsed so user-space should consider all events successfull unless read() returns an error. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/uhid.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/uhid.h b/include/linux/uhid.h index 8a493e604a77..6eb42bea86a2 100644 --- a/include/linux/uhid.h +++ b/include/linux/uhid.h @@ -25,6 +25,7 @@ enum uhid_event_type { UHID_CREATE, UHID_DESTROY, + UHID_INPUT, }; struct uhid_create_req { @@ -41,11 +42,19 @@ struct uhid_create_req { __u32 country; } __attribute__((__packed__)); +#define UHID_DATA_MAX 4096 + +struct uhid_input_req { + __u8 data[UHID_DATA_MAX]; + __u16 size; +} __attribute__((__packed__)); + struct uhid_event { __u32 type; union { struct uhid_create_req create; + struct uhid_input_req input; } u; } __attribute__((__packed__)); -- cgit v1.2.3 From ec4b7dea453e0f9fd0fbf1761b2d01eff64f264b Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:21 +0200 Subject: HID: uhid: add UHID_START and UHID_STOP events We send UHID_START and UHID_STOP events to user-space when the HID core starts/stops the device. This notifies user-space about driver readiness and data-I/O can start now. This directly forwards the callbacks from hid-core to user-space. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/uhid.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/uhid.h b/include/linux/uhid.h index 6eb42bea86a2..f8ce6f7571d8 100644 --- a/include/linux/uhid.h +++ b/include/linux/uhid.h @@ -25,6 +25,8 @@ enum uhid_event_type { UHID_CREATE, UHID_DESTROY, + UHID_START, + UHID_STOP, UHID_INPUT, }; -- cgit v1.2.3 From e7191474a5459e6ba7039fadca6a32f3a5731909 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:22 +0200 Subject: HID: uhid: forward open/close events to user-space HID core notifies us with *_open/*_close callbacks when there is an actual user of our device. We forward these to user-space so they can react on this. This allows user-space to skip I/O unless they receive an OPEN event. When they receive a CLOSE event they can stop I/O again to save energy. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/uhid.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/uhid.h b/include/linux/uhid.h index f8ce6f7571d8..351650b7a0f6 100644 --- a/include/linux/uhid.h +++ b/include/linux/uhid.h @@ -27,6 +27,8 @@ enum uhid_event_type { UHID_DESTROY, UHID_START, UHID_STOP, + UHID_OPEN, + UHID_CLOSE, UHID_INPUT, }; -- cgit v1.2.3 From f80e13601c51a836b2aac583b8a3b4327c0c27ce Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:23 +0200 Subject: HID: uhid: forward output request to user-space If the hid-driver wants to send standardized data to the device it uses a linux input_event. We forward this to the user-space transport-level driver so they can perform the requested action on the device. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/uhid.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/uhid.h b/include/linux/uhid.h index 351650b7a0f6..3fa484921010 100644 --- a/include/linux/uhid.h +++ b/include/linux/uhid.h @@ -29,6 +29,7 @@ enum uhid_event_type { UHID_STOP, UHID_OPEN, UHID_CLOSE, + UHID_OUTPUT_EV, UHID_INPUT, }; @@ -53,12 +54,19 @@ struct uhid_input_req { __u16 size; } __attribute__((__packed__)); +struct uhid_output_ev_req { + __u16 type; + __u16 code; + __s32 value; +} __attribute__((__packed__)); + struct uhid_event { __u32 type; union { struct uhid_create_req create; struct uhid_input_req input; + struct uhid_output_ev_req output_ev; } u; } __attribute__((__packed__)); -- cgit v1.2.3 From 3b3baa82e4306b5160692643fab2fa322ceb94f9 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:24 +0200 Subject: HID: uhid: forward raw output reports to user-space Some drivers that use non-standard HID features require raw output reports sent to the device. We now forward these requests directly to user-space so the transport-level driver can correctly send it to the device or handle it correspondingly. There is no way to signal back whether the transmission was successful, moreover, there might be lots of messages coming out from the driver flushing the output-queue. However, there is currently no driver that causes this so we are safe. If some drivers need to transmit lots of data this way, we need a method to synchronize this and can implement another UHID_OUTPUT_SYNC event. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/uhid.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/uhid.h b/include/linux/uhid.h index 3fa484921010..2c972550a624 100644 --- a/include/linux/uhid.h +++ b/include/linux/uhid.h @@ -29,6 +29,7 @@ enum uhid_event_type { UHID_STOP, UHID_OPEN, UHID_CLOSE, + UHID_OUTPUT, UHID_OUTPUT_EV, UHID_INPUT, }; @@ -49,11 +50,23 @@ struct uhid_create_req { #define UHID_DATA_MAX 4096 +enum uhid_report_type { + UHID_FEATURE_REPORT, + UHID_OUTPUT_REPORT, + UHID_INPUT_REPORT, +}; + struct uhid_input_req { __u8 data[UHID_DATA_MAX]; __u16 size; } __attribute__((__packed__)); +struct uhid_output_req { + __u8 data[UHID_DATA_MAX]; + __u16 size; + __u8 rtype; +} __attribute__((__packed__)); + struct uhid_output_ev_req { __u16 type; __u16 code; @@ -66,6 +79,7 @@ struct uhid_event { union { struct uhid_create_req create; struct uhid_input_req input; + struct uhid_output_req output; struct uhid_output_ev_req output_ev; } u; } __attribute__((__packed__)); -- cgit v1.2.3 From fcfcf0deb89ece6eb9ae23768fec1bc1718f9b7f Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 10 Jun 2012 15:16:25 +0200 Subject: HID: uhid: implement feature requests HID standard allows sending a feature request to the device which is answered by an HID report. uhid implements this by sending a UHID_FEATURE event to user-space which then must answer with UHID_FEATURE_ANSWER. If it doesn't do this in a timely manner, the request is discarded silently. We serialize the feature requests, that is, there is always only a single active feature-request sent to user-space, other requests have to wait. HIDP and USB-HID do it the same way. Because we discard feature-requests silently, we must make sure to match a response to the corresponding request. We use sequence-IDs for this so user-space must copy the ID from the request into the answer. Feature-answers are ignored if they do not contain the same ID as the currently pending feature request. Internally, we must make sure that feature-requests are synchronized with UHID_DESTROY and close() events. We must not dead-lock when closing the HID device, either, so we have to use separate locks. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- include/linux/uhid.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/uhid.h b/include/linux/uhid.h index 2c972550a624..9c6974f16966 100644 --- a/include/linux/uhid.h +++ b/include/linux/uhid.h @@ -32,6 +32,8 @@ enum uhid_event_type { UHID_OUTPUT, UHID_OUTPUT_EV, UHID_INPUT, + UHID_FEATURE, + UHID_FEATURE_ANSWER, }; struct uhid_create_req { @@ -73,6 +75,19 @@ struct uhid_output_ev_req { __s32 value; } __attribute__((__packed__)); +struct uhid_feature_req { + __u32 id; + __u8 rnum; + __u8 rtype; +} __attribute__((__packed__)); + +struct uhid_feature_answer_req { + __u32 id; + __u16 err; + __u16 size; + __u8 data[UHID_DATA_MAX]; +}; + struct uhid_event { __u32 type; @@ -81,6 +96,8 @@ struct uhid_event { struct uhid_input_req input; struct uhid_output_req output; struct uhid_output_ev_req output_ev; + struct uhid_feature_req feature; + struct uhid_feature_answer_req feature_answer; } u; } __attribute__((__packed__)); -- cgit v1.2.3 From 728b19e5fb9bbebbd580784a092b786fe379ed8e Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:10 +0800 Subject: {nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationInterval As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 6936fabe8797..b7c3b737ddde 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2192,6 +2192,10 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between * proactive PREQs are transmitted. * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2220,6 +2224,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HT_OPMODE, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit v1.2.3 From 08aed2f6fb09c9f8efc9258c152072ed614db226 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 11 Jun 2012 20:14:24 +0800 Subject: regulator: stubs: Make stub regulator_get_voltage() return an error Returning 0 isn't useful, it's not even meaningful if there is a real regulator there. Reported-by: Guennadi Liakhovetski Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 4ed1b30ac5fc..9ff29ef317c2 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -291,7 +291,7 @@ static inline int regulator_set_voltage(struct regulator *regulator, static inline int regulator_get_voltage(struct regulator *regulator) { - return 0; + return -EINVAL; } static inline int regulator_set_current_limit(struct regulator *regulator, -- cgit v1.2.3 From 9900b4b48b095895cf962054e45aafa49ef70f74 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 15 Jun 2012 15:07:02 -0400 Subject: KVM: use KVM_CAP_IRQ_ROUTING to protect the routing related code The KVM code sometimes uses CONFIG_HAVE_KVM_IRQCHIP to protect code that is related to IRQ routing, which not all in-kernel irqchips may support. Use KVM_CAP_IRQ_ROUTING instead. Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 27ac8a4767fa..c7f77876c9b3 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -802,7 +802,7 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se } #endif -#ifdef CONFIG_HAVE_KVM_IRQCHIP +#ifdef KVM_CAP_IRQ_ROUTING #define KVM_MAX_IRQ_ROUTES 1024 -- cgit v1.2.3 From fec1868e23099023bc545e199b78d99840b1abc9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 18 Jun 2012 15:38:22 -0700 Subject: USB: properly pad out usb_device_id.driver_info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On some systems, struct usb_device_id doesn't align properly due to the recent changes in it. So pad out the driver_info field to align on a boundry that systems can handle it. Reported-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Cc: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- include/linux/mod_devicetable.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 7771d453e5f3..6955045199b0 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -122,7 +122,8 @@ struct usb_device_id { __u8 bInterfaceNumber; /* not matched against */ - kernel_ulong_t driver_info; + kernel_ulong_t driver_info + __attribute__((aligned(sizeof(kernel_ulong_t)))); }; /* Some useful macros to use to create struct usb_device_id */ -- cgit v1.2.3 From 6aeec0eacd3c6ac259e38d95a9398ac258470b4c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 27 May 2012 06:54:29 -0300 Subject: [media] videodev2.h: add new hwseek capability bits Tell the application whether the hardware seek is bounded and/or wraps around. Signed-off-by: Hans Verkuil Acked-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 370d11106c11..2339678de092 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -2039,6 +2039,8 @@ struct v4l2_modulator { /* Flags for the 'capability' field */ #define V4L2_TUNER_CAP_LOW 0x0001 #define V4L2_TUNER_CAP_NORM 0x0002 +#define V4L2_TUNER_CAP_HWSEEK_BOUNDED 0x0004 +#define V4L2_TUNER_CAP_HWSEEK_WRAP 0x0008 #define V4L2_TUNER_CAP_STEREO 0x0010 #define V4L2_TUNER_CAP_LANG2 0x0020 #define V4L2_TUNER_CAP_SAP 0x0020 -- cgit v1.2.3 From 23f2d735a932c7833d2d00da5e3ecdf4a6836210 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 18 Jun 2012 18:33:48 +0200 Subject: iio: Add helper function for initializing triggered buffers Add a helper function for executing the common tasks which are usually involved in setting up a simple software ringbuffer. It will allocate the buffer, allocate the pollfunc and register the buffer. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/triggered_buffer.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 include/linux/iio/triggered_buffer.h (limited to 'include/linux') diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h new file mode 100644 index 000000000000..c378ebec605e --- /dev/null +++ b/include/linux/iio/triggered_buffer.h @@ -0,0 +1,15 @@ +#ifndef _LINUX_IIO_TRIGGERED_BUFFER_H_ +#define _LINUX_IIO_TRIGGERED_BUFFER_H_ + +#include + +struct iio_dev; +struct iio_buffer_setup_ops; + +int iio_triggered_buffer_setup(struct iio_dev *indio_dev, + irqreturn_t (*pollfunc_bh)(int irq, void *p), + irqreturn_t (*pollfunc_th)(int irq, void *p), + const struct iio_buffer_setup_ops *setup_ops); +void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev); + +#endif -- cgit v1.2.3 From 9cc113bc84e683435c110268712d25aea05b8198 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 18 Jun 2012 20:33:01 +0200 Subject: iio: typo in iio_chan_spec.ext_info comment Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index ae0cad908182..2afbb6f01afc 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -214,7 +214,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * @event_mask: What events can this channel produce. * @ext_info: Array of extended info attributes for this channel. * The array is NULL terminated, the last element should - * have it's name field set to NULL. + * have its name field set to NULL. * @extend_name: Allows labeling of channel attributes with an * informative name. Note this has no effect codes etc, * unlike modifiers. -- cgit v1.2.3 From b90406f1e5f4cb673e331ce6d435f4bdbf2136a2 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 18 Jun 2012 20:33:02 +0200 Subject: iio: correct documentation for IIO_CONST_ATTR_SAMP_FREQ_AVAIL, match name of #define Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/sysfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h index bfedb73b850e..b7a934b9431b 100644 --- a/include/linux/iio/sysfs.h +++ b/include/linux/iio/sysfs.h @@ -97,7 +97,7 @@ struct iio_const_attr { #define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show) \ IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0) /** - * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies + * IIO_CONST_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies * @_string: frequency string for the attribute * * Constant version -- cgit v1.2.3 From 19ea4752fc1f45c778ae66443c1023aced14ba05 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 18 Jun 2012 20:33:03 +0200 Subject: iio: remove extra ; after function definition Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/buffer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index fb0fe46fd659..ad4fb1af0f7d 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -184,7 +184,7 @@ static inline int iio_buffer_register(struct iio_dev *indio_dev, } static inline void iio_buffer_unregister(struct iio_dev *indio_dev) -{}; +{} #endif /* CONFIG_IIO_BUFFER */ -- cgit v1.2.3 From c848bc8538cd29e92223d5e72e8fb60e6f2e176e Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Mon, 18 Jun 2012 09:49:20 +0900 Subject: regulator: s5m8767a: Support AP watchdog reset operation The S5M8767A can't know status of ap reset. So, After AP watchdog reset, AP can't boot normally. Problem can be happened like below condition. - AP Bootable lowest voltage(vdd_arm): 0.9v - AP DVFS voltage table: 0.8v, 0.9v, 1.0v - During AP works on lowest voltage(0.8V), watchdog reset is asserted - AP can't boot, because vdd arm is still 0.8v Solution - Basic concept: After ap watchdog reset, GPIO configuration is changed by default value - S5M8767A has function of voltage control with gpio (8 levels with 3 gpios) - Set bootable voltage on level 0 -> can work with default gpio configuration - In the probing, Change voltage control level from level 0 to level 1 - Execute normal dvfs operation on level 1 - After watchdog reset, ap gpio is set by default value - PMIC operation mode is changed by ap reset (level1 -> level0) - Regardless of previous vdd_arm voltage, AP always can be booted. Signed-off-by: Sangbeom Kim Signed-off-by: Mark Brown --- include/linux/mfd/s5m87xx/s5m-core.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h index 21603b42f22f..0b2e0ed309f5 100644 --- a/include/linux/mfd/s5m87xx/s5m-core.h +++ b/include/linux/mfd/s5m87xx/s5m-core.h @@ -347,6 +347,7 @@ struct s5m_platform_data { bool buck_voltage_lock; int buck_gpios[3]; + int buck_ds[3]; int buck2_voltage[8]; bool buck2_gpiodvs; int buck3_voltage[8]; @@ -369,6 +370,10 @@ struct s5m_platform_data { bool buck2_ramp_enable; bool buck3_ramp_enable; bool buck4_ramp_enable; + + int buck2_init; + int buck3_init; + int buck4_init; }; #endif /* __LINUX_MFD_S5M_CORE_H */ -- cgit v1.2.3 From 7c9416365c60f150ef8961a2855fafbc7394ad6b Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 13 Jun 2012 20:04:33 +0200 Subject: canfd: add new data structures and constants - add new struct canfd_frame - check identical element offsets in struct can_frame and struct canfd_frame - new ETH_P_CANFD definition to tag CAN FD skbs correctly - add CAN_MTU and CANFD_MTU definitions for easy frame and mode detection - add CAN[FD]_MAX_[DLC|DLEN] helper constants to remove hard coded values - update existing struct can_frame with helper constants and comments Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can.h | 59 ++++++++++++++++++++++++++++++++++++++++++++---- include/linux/if_ether.h | 3 ++- 2 files changed, 56 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/can.h b/include/linux/can.h index 17334c09bd93..1a66cf6112ae 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -46,18 +46,67 @@ typedef __u32 canid_t; */ typedef __u32 can_err_mask_t; +/* CAN payload length and DLC definitions according to ISO 11898-1 */ +#define CAN_MAX_DLC 8 +#define CAN_MAX_DLEN 8 + +/* CAN FD payload length and DLC definitions according to ISO 11898-7 */ +#define CANFD_MAX_DLC 15 +#define CANFD_MAX_DLEN 64 + /** * struct can_frame - basic CAN frame structure - * @can_id: the CAN ID of the frame and CAN_*_FLAG flags, see above. - * @can_dlc: the data length field of the CAN frame - * @data: the CAN frame payload. + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @can_dlc: frame payload length in byte (0 .. 8) aka data length code + * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1 + * mapping of the 'data length code' to the real payload length + * @data: CAN frame payload (up to 8 byte) */ struct can_frame { canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 can_dlc; /* data length code: 0 .. 8 */ - __u8 data[8] __attribute__((aligned(8))); + __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */ + __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); }; +/* + * defined bits for canfd_frame.flags + * + * As the default for CAN FD should be to support the high data rate in the + * payload section of the frame (HDR) and to support up to 64 byte in the + * data section (EDL) the bits are only set in the non-default case. + * Btw. as long as there's no real implementation for CAN FD network driver + * these bits are only preliminary. + * + * RX: NOHDR/NOEDL - info about received CAN FD frame + * ESI - bit from originating CAN controller + * TX: NOHDR/NOEDL - control per-frame settings if supported by CAN controller + * ESI - bit is set by local CAN controller + */ +#define CANFD_NOHDR 0x01 /* frame without high data rate */ +#define CANFD_NOEDL 0x02 /* frame without extended data length */ +#define CANFD_ESI 0x04 /* error state indicator */ + +/** + * struct canfd_frame - CAN flexible data rate frame structure + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @len: frame payload length in byte (0 .. CANFD_MAX_DLEN) + * @flags: additional flags for CAN FD + * @__res0: reserved / padding + * @__res1: reserved / padding + * @data: CAN FD frame payload (up to CANFD_MAX_DLEN byte) + */ +struct canfd_frame { + canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ + __u8 len; /* frame payload length in byte */ + __u8 flags; /* additional flags for CAN FD */ + __u8 __res0; /* reserved / padding */ + __u8 __res1; /* reserved / padding */ + __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8))); +}; + +#define CAN_MTU (sizeof(struct can_frame)) +#define CANFD_MTU (sizeof(struct canfd_frame)) + /* particular protocols of the protocol family PF_CAN */ #define CAN_RAW 1 /* RAW sockets */ #define CAN_BCM 2 /* Broadcast Manager */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 56d907a2c804..167ce5b363d2 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -105,7 +105,8 @@ #define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ #define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ #define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ -#define ETH_P_CAN 0x000C /* Controller Area Network */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ #define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ #define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ #define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ -- cgit v1.2.3 From 8b01939f358d680cea971151375268cfdb6b9635 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 13 Jun 2012 20:33:02 +0200 Subject: canfd: add support for CAN FD in PF_CAN core - handle ETH_P_CAN and ETH_P_CANFD skbuffs - update sanity checks for CAN and CAN FD - make sure the CAN frame can pass the selected CAN netdevice on send - bump core version and abi version to indicate the new CAN FD support Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can/core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/can/core.h b/include/linux/can/core.h index 0ccc1cd28b95..78c6c52073ad 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -17,10 +17,10 @@ #include #include -#define CAN_VERSION "20090105" +#define CAN_VERSION "20120528" /* increment this number each time you change some user-space interface */ -#define CAN_ABI_VERSION "8" +#define CAN_ABI_VERSION "9" #define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION -- cgit v1.2.3 From e2d265d3b587f5f6f8febc0222aace93302ff0be Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 13 Jun 2012 20:41:31 +0200 Subject: canfd: add support for CAN FD in CAN_RAW sockets - introduce a new sockopt CAN_RAW_FD_FRAMES to allow CAN FD frames - handle CAN frames and CAN FD frames simultaneously when enabled Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can/raw.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/can/raw.h b/include/linux/can/raw.h index 781f3a3701be..a814062b0719 100644 --- a/include/linux/can/raw.h +++ b/include/linux/can/raw.h @@ -23,7 +23,8 @@ enum { CAN_RAW_FILTER = 1, /* set 0 .. n can_filter(s) */ CAN_RAW_ERR_FILTER, /* set filter for error frames */ CAN_RAW_LOOPBACK, /* local loopback (default:on) */ - CAN_RAW_RECV_OWN_MSGS /* receive my own msgs (default:off) */ + CAN_RAW_RECV_OWN_MSGS, /* receive my own msgs (default:off) */ + CAN_RAW_FD_FRAMES, /* allow CAN FD frames (default:off) */ }; #endif -- cgit v1.2.3 From 1e0625facab2e871472472b7df87d8fbe6caf75a Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 13 Jun 2012 20:48:21 +0200 Subject: candev: add/update helpers for CAN FD - update sanity checks - add DLC to length conversion helpers - can_dlc2len() - get data length from can_dlc with sanitized can_dlc - can_len2dlc() - map the sanitized data length to an appropriate DLC Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can/dev.h | 33 +++++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 5d2efe7e3f1b..ee5a771fb20d 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -61,23 +61,40 @@ struct can_priv { * To be used in the CAN netdriver receive path to ensure conformance with * ISO 11898-1 Chapter 8.4.2.3 (DLC field) */ -#define get_can_dlc(i) (min_t(__u8, (i), 8)) +#define get_can_dlc(i) (min_t(__u8, (i), CAN_MAX_DLC)) +#define get_canfd_dlc(i) (min_t(__u8, (i), CANFD_MAX_DLC)) /* Drop a given socketbuffer if it does not contain a valid CAN frame. */ static inline int can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb) { - const struct can_frame *cf = (struct can_frame *)skb->data; - - if (unlikely(skb->len != sizeof(*cf) || cf->can_dlc > 8)) { - kfree_skb(skb); - dev->stats.tx_dropped++; - return 1; - } + const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; + + if (skb->protocol == htons(ETH_P_CAN)) { + if (unlikely(skb->len != CAN_MTU || + cfd->len > CAN_MAX_DLEN)) + goto inval_skb; + } else if (skb->protocol == htons(ETH_P_CANFD)) { + if (unlikely(skb->len != CANFD_MTU || + cfd->len > CANFD_MAX_DLEN)) + goto inval_skb; + } else + goto inval_skb; return 0; + +inval_skb: + kfree_skb(skb); + dev->stats.tx_dropped++; + return 1; } +/* get data length from can_dlc with sanitized can_dlc */ +u8 can_dlc2len(u8 can_dlc); + +/* map the sanitized data length to an appropriate data length code */ +u8 can_len2dlc(u8 len); + struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); void free_candev(struct net_device *dev); -- cgit v1.2.3 From 0402788a6cda4e204a805e83eaaff64fef9e4418 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 19 Jun 2012 05:54:03 +0000 Subject: team: make team_mode struct const Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 8185f57a9c7f..d45fcd5a188d 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -105,7 +105,6 @@ struct team_option { }; struct team_mode { - struct list_head list; const char *kind; struct module *owner; size_t priv_size; @@ -178,8 +177,8 @@ extern int team_options_register(struct team *team, extern void team_options_unregister(struct team *team, const struct team_option *option, size_t option_count); -extern int team_mode_register(struct team_mode *mode); -extern int team_mode_unregister(struct team_mode *mode); +extern int team_mode_register(const struct team_mode *mode); +extern void team_mode_unregister(const struct team_mode *mode); #endif /* __KERNEL__ */ -- cgit v1.2.3 From 5149ee58385bdfef260fb07a89a8ff0913be6b25 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 19 Jun 2012 05:54:05 +0000 Subject: team: add mode priv to port Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index d45fcd5a188d..54af95f5d58b 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -61,6 +61,7 @@ struct team_port { } orig; struct rcu_head rcu; + long mode_priv[0]; }; struct team_mode_ops { @@ -108,6 +109,7 @@ struct team_mode { const char *kind; struct module *owner; size_t priv_size; + size_t port_priv_size; const struct team_mode_ops *ops; }; -- cgit v1.2.3 From b13033262d2496e271444d5a09226a2be5ceb989 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 19 Jun 2012 05:54:08 +0000 Subject: team: introduce array options Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 54af95f5d58b..b1719e239a0b 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -93,6 +93,7 @@ struct team_gsetter_ctx { } bin_val; bool bool_val; } data; + u32 array_index; struct team_port *port; }; @@ -100,6 +101,7 @@ struct team_option { struct list_head list; const char *name; bool per_port; + unsigned int array_size; /* != 0 means the option is array */ enum team_option_type type; int (*getter)(struct team *team, struct team_gsetter_ctx *ctx); int (*setter)(struct team *team, struct team_gsetter_ctx *ctx); @@ -242,6 +244,7 @@ enum { TEAM_ATTR_OPTION_DATA, /* dynamic */ TEAM_ATTR_OPTION_REMOVED, /* flag */ TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ + TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ __TEAM_ATTR_OPTION_MAX, TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, -- cgit v1.2.3 From 85d59a87248de90e3266e10dce99477b60f524c0 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 19 Jun 2012 05:54:10 +0000 Subject: team: push array_index and port into separate structure Introduce struct team_option_inst_info and push option instance info there. It can be then easily passed to gsetter context and used for feature async option changes. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index b1719e239a0b..30854cb0c855 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -83,6 +83,11 @@ enum team_option_type { TEAM_OPTION_TYPE_BOOL, }; +struct team_option_inst_info { + u32 array_index; + struct team_port *port; /* != NULL if per-port */ +}; + struct team_gsetter_ctx { union { u32 u32_val; @@ -93,8 +98,7 @@ struct team_gsetter_ctx { } bin_val; bool bool_val; } data; - u32 array_index; - struct team_port *port; + struct team_option_inst_info *info; }; struct team_option { @@ -103,6 +107,7 @@ struct team_option { bool per_port; unsigned int array_size; /* != 0 means the option is array */ enum team_option_type type; + int (*init)(struct team *team, struct team_option_inst_info *info); int (*getter)(struct team *team, struct team_gsetter_ctx *ctx); int (*setter)(struct team *team, struct team_gsetter_ctx *ctx); }; -- cgit v1.2.3 From 0f1aad2b7f01d88782fbf4ab08b13a7d92b9b6b2 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 19 Jun 2012 05:54:11 +0000 Subject: team: allow async option changes This patch adds two exported functions. One allows to mark option instance as changed and the second processes change check and does transfer of changed options to userspace. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 30854cb0c855..2f2972535cc0 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -112,6 +112,9 @@ struct team_option { int (*setter)(struct team *team, struct team_gsetter_ctx *ctx); }; +extern void team_option_inst_set_change(struct team_option_inst_info *opt_inst_info); +extern void team_options_change_check(struct team *team); + struct team_mode { const char *kind; struct module *owner; -- cgit v1.2.3 From 4bccfd17e1f77593e99d5321c48c704a0a43ab68 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 19 Jun 2012 05:54:16 +0000 Subject: team: add port_[enabled/disabled] mode callbacks Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 2f2972535cc0..c1938869191f 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -74,6 +74,8 @@ struct team_mode_ops { int (*port_enter)(struct team *team, struct team_port *port); void (*port_leave)(struct team *team, struct team_port *port); void (*port_change_mac)(struct team *team, struct team_port *port); + void (*port_enabled)(struct team *team, struct team_port *port); + void (*port_disabled)(struct team *team, struct team_port *port); }; enum team_option_type { -- cgit v1.2.3 From af8b5fc31099abd7f3b297332c9e280ec0b30a71 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Tue, 19 Jun 2012 07:08:22 +0000 Subject: regulator: add new regulator driver for lp872x This driver supports TI/National LP8720, LP8725 PMIC. Signed-off-by: Milo(Woogyom) Kim Reviewed-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/regulator/lp872x.h | 90 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 include/linux/regulator/lp872x.h (limited to 'include/linux') diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h new file mode 100644 index 000000000000..132e05c46661 --- /dev/null +++ b/include/linux/regulator/lp872x.h @@ -0,0 +1,90 @@ +/* + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LP872X_REGULATOR_H__ +#define __LP872X_REGULATOR_H__ + +#include +#include +#include + +#define LP872X_MAX_REGULATORS 9 + +enum lp872x_regulator_id { + LP8720_ID_BASE, + LP8720_ID_LDO1 = LP8720_ID_BASE, + LP8720_ID_LDO2, + LP8720_ID_LDO3, + LP8720_ID_LDO4, + LP8720_ID_LDO5, + LP8720_ID_BUCK, + + LP8725_ID_BASE, + LP8725_ID_LDO1 = LP8725_ID_BASE, + LP8725_ID_LDO2, + LP8725_ID_LDO3, + LP8725_ID_LDO4, + LP8725_ID_LDO5, + LP8725_ID_LILO1, + LP8725_ID_LILO2, + LP8725_ID_BUCK1, + LP8725_ID_BUCK2, + + LP872X_ID_MAX, +}; + +enum lp872x_dvs_state { + DVS_LOW = GPIOF_OUT_INIT_LOW, + DVS_HIGH = GPIOF_OUT_INIT_HIGH, +}; + +enum lp872x_dvs_sel { + SEL_V1, + SEL_V2, +}; + +/** + * lp872x_dvs + * @gpio : gpio pin number for dvs control + * @vsel : dvs selector for buck v1 or buck v2 register + * @init_state : initial dvs pin state + */ +struct lp872x_dvs { + int gpio; + enum lp872x_dvs_sel vsel; + enum lp872x_dvs_state init_state; +}; + +/** + * lp872x_regdata + * @id : regulator id + * @init_data : init data for each regulator + */ +struct lp872x_regulator_data { + enum lp872x_regulator_id id; + struct regulator_init_data *init_data; +}; + +/** + * lp872x_platform_data + * @general_config : the value of LP872X_GENERAL_CFG register + * @update_config : if LP872X_GENERAL_CFG register is updated, set true + * @regulator_data : platform regulator id and init data + * @dvs : dvs data for buck voltage control + */ +struct lp872x_platform_data { + u8 general_config; + bool update_config; + struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; + struct lp872x_dvs *dvs; +}; + +#endif -- cgit v1.2.3 From dfad84aeab5f71b33a12e6803a809f698bdef5a2 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 19 Jun 2012 17:43:56 +0200 Subject: regulator: support multiple dummy fixed regulators Currently regulator_register_fixed() uses a constant name to register a fixed dummy regulator. This is sufficient in principle, since there is no reason to register multiple such regulators. The user can simply supply all consumers in one array and use it to initialise such a regulator. However, in some cases it can be convenient to register multiple such regulators. This is also a prerequisite for the upcoming patch, that will add a voltage parameter to this function. The original function is provided as a wrapper macro. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mark Brown --- include/linux/regulator/fixed.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index f83f7440b488..6b9325b5e371 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -58,14 +58,17 @@ struct fixed_voltage_config { struct regulator_consumer_supply; #if IS_ENABLED(CONFIG_REGULATOR) -struct platform_device *regulator_register_fixed(int id, +struct platform_device *regulator_register_always_on(int id, const char *name, struct regulator_consumer_supply *supplies, int num_supplies); #else -static inline struct platform_device *regulator_register_fixed(int id, +static inline struct platform_device *regulator_register_always_on(int id, const char *name, struct regulator_consumer_supply *supplies, int num_supplies) { return NULL; } #endif +#define regulator_register_fixed(id, s, ns) regulator_register_always_on(id, \ + "fixed-dummy", s, ns) + #endif -- cgit v1.2.3 From 15719ccc274981b19ad8fe9ac20c94249de8a257 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 19 Jun 2012 17:44:39 +0200 Subject: regulator: extend the fixed dummy voltage regulator to accept voltage Trivially extend the regulator_register_always_on() helper function to be even more useful by adding a voltage parameter to it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mark Brown --- include/linux/regulator/fixed.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 6b9325b5e371..680f24e08af2 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -59,16 +59,16 @@ struct regulator_consumer_supply; #if IS_ENABLED(CONFIG_REGULATOR) struct platform_device *regulator_register_always_on(int id, const char *name, - struct regulator_consumer_supply *supplies, int num_supplies); + struct regulator_consumer_supply *supplies, int num_supplies, int uv); #else static inline struct platform_device *regulator_register_always_on(int id, const char *name, - struct regulator_consumer_supply *supplies, int num_supplies) + struct regulator_consumer_supply *supplies, int num_supplies, int uv) { return NULL; } #endif #define regulator_register_fixed(id, s, ns) regulator_register_always_on(id, \ - "fixed-dummy", s, ns) + "fixed-dummy", s, ns, 0) #endif -- cgit v1.2.3 From 3e7b706ca5151849e4ca91f7f3d8d6d8d8f7b667 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 14 Mar 2012 15:34:17 -0700 Subject: mfd: twl: remove pdata->irq_base/_end, no more users After converstion to SPARSE_IRQ, the driver doesn't use the pdata->irq_base/irq_end fields anymore. The last users have been cleanup up, and now these fields can be removed. Cc: Benoit Cousson Acked-by: Samuel Ortiz Signed-off-by: Kevin Hilman --- include/linux/i2c/twl.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 3993477103a5..555382660bc4 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -683,7 +683,6 @@ struct twl4030_audio_data { }; struct twl4030_platform_data { - unsigned irq_base, irq_end; struct twl4030_clock_init_data *clock; struct twl4030_bci_platform_data *bci; struct twl4030_gpio_platform_data *gpio; -- cgit v1.2.3 From 3824c47714f28091f74ca2505146514b4da1f390 Mon Sep 17 00:00:00 2001 From: Ramakrishna Pallala Date: Sun, 6 May 2012 18:16:44 +0530 Subject: power_supply: Add constant charge_current and charge_voltage properties Constant Charge Current(CC) is charging parameter which limit the maximum current which can be pumped into the battery during charge cycle. Constant Charge Voltage(CV) is also charging parameter which limit the maximum voltage that battery can reach during charge cycle. It is very common practice that at low or high temperatures we do not charge the batteries upto it's fullest charge voltage to avoid battery and user safety issues. These sysfs properties will be useful for debug and to implement certain user space policies like "Charging limited due to OverTemp". Signed-off-by: Ramakrishna Pallala Signed-off-by: Anton Vorontsov --- include/linux/power_supply.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 59ed2dd9dba9..53f177db6ac9 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -109,6 +109,8 @@ enum power_supply_property { POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_AVG, POWER_SUPPLY_PROP_CHARGE_COUNTER, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, @@ -239,6 +241,7 @@ static inline bool power_supply_is_amp_property(enum power_supply_property psp) case POWER_SUPPLY_PROP_CHARGE_NOW: case POWER_SUPPLY_PROP_CHARGE_AVG: case POWER_SUPPLY_PROP_CHARGE_COUNTER: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: case POWER_SUPPLY_PROP_CURRENT_MAX: case POWER_SUPPLY_PROP_CURRENT_NOW: case POWER_SUPPLY_PROP_CURRENT_AVG: @@ -266,6 +269,7 @@ static inline bool power_supply_is_watt_property(enum power_supply_property psp) case POWER_SUPPLY_PROP_VOLTAGE_NOW: case POWER_SUPPLY_PROP_VOLTAGE_AVG: case POWER_SUPPLY_PROP_VOLTAGE_OCV: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: case POWER_SUPPLY_PROP_POWER_NOW: return 1; default: -- cgit v1.2.3 From 210d4bc8a3128e3e61ac3bf4657114f8e6450e2a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 9 May 2012 07:40:40 +1000 Subject: twl4030_charger: Add backup-battery charging This allows a voltage and current (bb_uvolts and bb_uamps) to be specified in the platform_data, and charging of the backup battery will be enabled with those specification. As it is not possible to monitor the backup battery at all there is no new device created to represent it. Signed-off-by: NeilBrown Signed-off-by: Anton Vorontsov --- include/linux/i2c/twl.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 3993477103a5..8eec4403b170 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -555,6 +555,8 @@ struct twl4030_clock_init_data { struct twl4030_bci_platform_data { int *battery_tmp_tbl; unsigned int tblsize; + int bb_uvolt; /* voltage to charge backup battery */ + int bb_uamp; /* current for backup battery charging */ }; /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ -- cgit v1.2.3 From e7b691b085fda913830e5280ae6f724b2a63c824 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 9 Jun 2012 02:40:03 -0700 Subject: slab/mempolicy: always use local policy from interrupt context slab_node() could access current->mempolicy from interrupt context. However there's a race condition during exit where the mempolicy is first freed and then the pointer zeroed. Using this from interrupts seems bogus anyways. The interrupt will interrupt a random process and therefore get a random mempolicy. Many times, this will be idle's, which noone can change. Just disable this here and always use local for slab from interrupts. I also cleaned up the callers of slab_node a bit which always passed the same argument. I believe the original mempolicy code did that in fact, so it's likely a regression. v2: send version with correct logic v3: simplify. fix typo. Reported-by: Arun Sharma Cc: penberg@kernel.org Cc: cl@linux.com Signed-off-by: Andi Kleen [tdmackey@twitter.com: Rework control flow based on feedback from cl@linux.com, fix logic, and cleanup current task_struct reference] Acked-by: David Rientjes Acked-by: Christoph Lameter Acked-by: KOSAKI Motohiro Signed-off-by: David Mackey Signed-off-by: Pekka Enberg --- include/linux/mempolicy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index 4aa42732e47f..95b738c7abff 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -215,7 +215,7 @@ extern struct zonelist *huge_zonelist(struct vm_area_struct *vma, extern bool init_nodemask_of_mempolicy(nodemask_t *mask); extern bool mempolicy_nodemask_intersects(struct task_struct *tsk, const nodemask_t *mask); -extern unsigned slab_node(struct mempolicy *policy); +extern unsigned slab_node(void); extern enum zone_type policy_zone; -- cgit v1.2.3 From b3c185a7614cd95ea9b68d89a8d1ee4227ee9018 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 Jun 2012 17:29:04 +0900 Subject: sh: pfc: Split out gpio chip support. This implements a bit of rework for the PFC code, making the core itself slightly more pluggable and moving out the gpio chip handling completely. The API is preserved in such a way that platforms that depend on it for early configuration are still able to do so, while making it possible to migrate to alternate interfaces going forward. This is the first step of chainsawing necessary to support the pinctrl API, with the eventual goal being able to decouple pin function state from the gpio API while retaining gpio chip tie-in for gpio pin functions only, relying on the pinctrl/pinmux API for non-gpio function demux. Signed-off-by: Paul Mundt --- include/linux/sh_pfc.h | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h index 5c15aed9c4b2..95dad340794a 100644 --- a/include/linux/sh_pfc.h +++ b/include/linux/sh_pfc.h @@ -89,7 +89,7 @@ struct pfc_window { unsigned long size; }; -struct pinmux_info { +struct sh_pfc { char *name; pinmux_enum_t reserved_id; struct pinmux_range data; @@ -112,17 +112,44 @@ struct pinmux_info { struct pinmux_irq *gpio_irq; unsigned int gpio_irq_size; + spinlock_t lock; + struct resource *resource; unsigned int num_resources; struct pfc_window *window; unsigned long unlock_reg; - - struct gpio_chip chip; }; -int register_pinmux(struct pinmux_info *pip); -int unregister_pinmux(struct pinmux_info *pip); +/* XXX compat for now */ +#define pinmux_info sh_pfc + +/* drivers/sh/pfc-gpio.c */ +int sh_pfc_register_gpiochip(struct sh_pfc *pfc); + +/* drivers/sh/pfc.c */ +int register_sh_pfc(struct sh_pfc *pfc); + +int sh_pfc_read_bit(struct pinmux_data_reg *dr, unsigned long in_pos); +void sh_pfc_write_bit(struct pinmux_data_reg *dr, unsigned long in_pos, + unsigned long value); +int sh_pfc_get_data_reg(struct sh_pfc *pfc, unsigned gpio, + struct pinmux_data_reg **drp, int *bitp); +int sh_pfc_gpio_to_enum(struct sh_pfc *pfc, unsigned gpio, int pos, + pinmux_enum_t *enum_idp); +int sh_pfc_config_gpio(struct sh_pfc *pfc, unsigned gpio, int pinmux_type, + int cfg_mode); +int sh_pfc_set_direction(struct sh_pfc *pfc, unsigned gpio, + int new_pinmux_type); + +/* xxx */ +static inline int register_pinmux(struct pinmux_info *pip) +{ + struct sh_pfc *pfc = pip; + return register_sh_pfc(pfc); +} + +enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE }; /* helper macro for port */ #define PORT_1(fn, pfx, sfx) fn(pfx, sfx) -- cgit v1.2.3 From 3052cc2c92f11875d111d5b7b9b3ad535b3128b9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 11 Jun 2012 20:11:40 +0200 Subject: dmaengine: Add wrapper for device_tx_status callback This patch adds a small inline wrapper for the devivce_tx_status callback of a dma device. This makes the source code of users of this function a bit more compact and a bit more legible. E.g.: -status = chan->device->device_tx_status(chan, cookie, &state) +status = dmaengine_tx_status(chan, cookie, &state) Signed-off-by: Lars-Peter Clausen Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index ccec62f8e501..9c02a4508b25 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -674,6 +674,12 @@ static inline int dmaengine_resume(struct dma_chan *chan) return dmaengine_device_control(chan, DMA_RESUME, 0); } +static inline enum dma_status dmaengine_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + return chan->device->device_tx_status(chan, cookie, state); +} + static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc) { return desc->tx_submit(desc); -- cgit v1.2.3 From 9f65b2b60c42c1e2d885acede4443b53f141c987 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 Jun 2012 22:29:14 +0900 Subject: sh: pfc: Kill off unused pinmux bias flags. WANT_PULLUP/DOWN were never interfaced with anything, so just kill them off. Signed-off-by: Paul Mundt --- include/linux/sh_pfc.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h index 95dad340794a..c06a47313a25 100644 --- a/include/linux/sh_pfc.h +++ b/include/linux/sh_pfc.h @@ -25,8 +25,6 @@ typedef unsigned short pinmux_flag_t; #define PINMUX_TYPE_INPUT_PULLDOWN 6 #define PINMUX_FLAG_TYPE (0x7) -#define PINMUX_FLAG_WANT_PULLUP (1 << 3) -#define PINMUX_FLAG_WANT_PULLDOWN (1 << 4) #define PINMUX_FLAG_DBIT_SHIFT 5 #define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT) -- cgit v1.2.3 From 06d5631f56460917af3d9417ef63811cf0cad9ce Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 21 Jun 2012 00:03:41 +0900 Subject: sh: pfc: Verify pin type encoding size at build time. The encoding is tightly packed, and future changes (such as pinconf-generic support) can easily lead to a situation where we violate the encoding constraints and trample data bit/reg bits. This plugs in some sanity checks by way of a BUILD_BUG_ON() to blow up if we fail to fit. Signed-off-by: Paul Mundt --- include/linux/sh_pfc.h | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h index c06a47313a25..ed1d8234f6ae 100644 --- a/include/linux/sh_pfc.h +++ b/include/linux/sh_pfc.h @@ -16,15 +16,18 @@ typedef unsigned short pinmux_enum_t; typedef unsigned short pinmux_flag_t; -#define PINMUX_TYPE_NONE 0 -#define PINMUX_TYPE_FUNCTION 1 -#define PINMUX_TYPE_GPIO 2 -#define PINMUX_TYPE_OUTPUT 3 -#define PINMUX_TYPE_INPUT 4 -#define PINMUX_TYPE_INPUT_PULLUP 5 -#define PINMUX_TYPE_INPUT_PULLDOWN 6 +enum { + PINMUX_TYPE_NONE, -#define PINMUX_FLAG_TYPE (0x7) + PINMUX_TYPE_FUNCTION, + PINMUX_TYPE_GPIO, + PINMUX_TYPE_OUTPUT, + PINMUX_TYPE_INPUT, + PINMUX_TYPE_INPUT_PULLUP, + PINMUX_TYPE_INPUT_PULLDOWN, + + PINMUX_FLAG_TYPE, /* must be last */ +}; #define PINMUX_FLAG_DBIT_SHIFT 5 #define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT) @@ -36,7 +39,9 @@ struct pinmux_gpio { pinmux_flag_t flags; }; -#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark } +#define PINMUX_GPIO(gpio, data_or_mark) \ + [gpio] = { .enum_id = data_or_mark, .flags = PINMUX_TYPE_NONE } + #define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0 struct pinmux_cfg_reg { -- cgit v1.2.3 From 5a05fae5ca7cd5279567747fc34d60413b504cd6 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 20 Jun 2012 20:50:31 +0200 Subject: netfilter: nfq_ct_hook needs __rcu and __read_mostly This removes some sparse warnings. Reported-by: Fengguang Wu Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index dca19e61b30a..38b96a54f9a5 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -404,7 +404,7 @@ struct nfq_ct_hook { void (*seq_adjust)(struct sk_buff *skb, struct nf_conn *ct, u32 ctinfo, int off); }; -extern struct nfq_ct_hook *nfq_ct_hook; +extern struct nfq_ct_hook __rcu *nfq_ct_hook; #else static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {} #endif -- cgit v1.2.3 From 924d37118f9e18825294b2012a10c6245d6c25e1 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 18 Jun 2012 19:15:50 -0700 Subject: pstore/ram: Probe as early as possible Registering the platform driver before module_init allows us to log oopses that happen during device probing. This requires changing module_init to postcore_initcall, and switching from platform_driver_probe to platform_driver_register because the platform device is not registered when the platform driver is registered; and because we use driver_register, now can't use create_bundle() (since it will try to register the same driver once again), so we have to switch to platform_device_register_data(). Also, some __init -> __devinit changes were needed. Overall, the registration logic is now much clearer, since we have only one driver registration point, and just an optional dummy device, which is created from the module parameters. Suggested-by: Colin Cross Signed-off-by: Anton Vorontsov Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 2470bb591434..e681af92c04b 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -48,9 +48,9 @@ struct persistent_ram_zone { size_t old_log_size; }; -struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, - size_t size, - bool ecc); +struct persistent_ram_zone * __devinit persistent_ram_new(phys_addr_t start, + size_t size, + bool ecc); void persistent_ram_free(struct persistent_ram_zone *prz); void persistent_ram_zap(struct persistent_ram_zone *prz); -- cgit v1.2.3 From c2ebea2097f84f0973c58b8467c1a2236bbb307a Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Wed, 20 Jun 2012 17:59:01 -0700 Subject: ieee80211: more OUI type definitions for WLAN_OUI_MICROSOFT WMM and WPS Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 6e0601189db9..318fc1f705b1 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1633,6 +1633,8 @@ enum ieee80211_sa_query_action { #define WLAN_OUI_TYPE_WFA_P2P 9 #define WLAN_OUI_MICROSOFT 0x0050f2 #define WLAN_OUI_TYPE_MICROSOFT_WPA 1 +#define WLAN_OUI_TYPE_MICROSOFT_WMM 2 +#define WLAN_OUI_TYPE_MICROSOFT_WPS 4 /* * WMM/802.11e Tspec Element -- cgit v1.2.3 From d584a61a931e6cbfef0dd811c4ae0250ec5987f4 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 20 Jun 2012 20:52:31 +0200 Subject: netfilter: nfnetlink_queue: fix compilation with CONFIG_NF_NAT=m and CONFIG_NF_CT_NETLINK=y LD init/built-in.o net/built-in.o:(.data+0x4408): undefined reference to `nf_nat_tcp_seq_adjust' make: *** [vmlinux] Error 1 This patch adds a new pointer hook (nfq_ct_nat_hook) similar to other existing in Netfilter to solve our complicated configuration dependencies. Reported-by: Valdis Kletnieks Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 38b96a54f9a5..c613cf0d7884 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -401,10 +401,14 @@ struct nfq_ct_hook { size_t (*build_size)(const struct nf_conn *ct); int (*build)(struct sk_buff *skb, struct nf_conn *ct); int (*parse)(const struct nlattr *attr, struct nf_conn *ct); +}; +extern struct nfq_ct_hook __rcu *nfq_ct_hook; + +struct nfq_ct_nat_hook { void (*seq_adjust)(struct sk_buff *skb, struct nf_conn *ct, u32 ctinfo, int off); }; -extern struct nfq_ct_hook __rcu *nfq_ct_hook; +extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook; #else static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {} #endif -- cgit v1.2.3 From d59315ca8c0de00df9b363f94a2641a30961ca1c Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Thu, 21 Jun 2012 12:49:23 -0700 Subject: libceph: drop ceph_con_get/put helpers and nref member These are no longer used. Every ceph_connection instance is embedded in another structure, and refcounts manipulated via the get/put ops. Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index a334dbd1b324..cc6f9bdcf466 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -135,7 +135,6 @@ struct ceph_msg_pos { */ struct ceph_connection { void *private; - atomic_t nref; const struct ceph_connection_operations *ops; -- cgit v1.2.3 From f4b57a3b4352f72e461e362cb25917e28bdba80f Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 22 Jun 2012 14:55:16 +0800 Subject: PCI/ACPI: provide MMCONFIG address for PCI host bridges This patch provide MMCONFIG address for PCI host bridges, which will be used to support host bridge hotplug. It gets MMCONFIG address by evaluating _CBA method if available. Reviewed-by: Yinghai Lu Signed-off-by: Jiang Liu Signed-off-by: Bjorn Helgaas --- include/linux/pci-acpi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 44623500f419..248fba2af98a 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -17,6 +17,7 @@ extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev); extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, struct pci_dev *pci_dev); extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev); +extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle); static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { -- cgit v1.2.3 From 397038519f2c2ac68c125c0cd766e91041c52b30 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 22 Jun 2012 14:55:21 +0800 Subject: ACPI: mark acpi_sfi_table_parse() as __init Mark function acpi_sfi_table_parse() as __init to avoid warning messages: WARNING: vmlinux.o(.text+0x4cd2d2): Section mismatch in reference from the function acpi_sfi_table_parse.clone.0() to the function Function acpi_sfi_table_parse() calls acpi_table_parse() and pci_parse_mcfg(), which are both marked as __init. Currently acpi_sfi_table_parse() is only used by MMCONFIG to scan MCFG table at boot time only, so it's safe to mark acpi_sfi_table_parse() as __init. Reviewed-by: Yinghai Lu Signed-off-by: Jiang Liu Signed-off-by: Bjorn Helgaas --- include/linux/sfi_acpi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h index c4a5a8cd4469..631af63af42d 100644 --- a/include/linux/sfi_acpi.h +++ b/include/linux/sfi_acpi.h @@ -66,7 +66,7 @@ extern int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id, int (*handler)(struct acpi_table_header *)); -static inline int acpi_sfi_table_parse(char *signature, +static inline int __init acpi_sfi_table_parse(char *signature, int (*handler)(struct acpi_table_header *)) { if (!acpi_table_parse(signature, handler)) @@ -83,7 +83,7 @@ static inline int sfi_acpi_table_parse(char *signature, char *oem_id, return -1; } -static inline int acpi_sfi_table_parse(char *signature, +static inline int __init acpi_sfi_table_parse(char *signature, int (*handler)(struct acpi_table_header *)) { return acpi_table_parse(signature, handler); -- cgit v1.2.3 From 6648bd7e0e62c0c8c03b15e00c9e7015e232feff Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 21 Jun 2012 13:58:31 +0000 Subject: ipv4: Add sysctl knob to control early socket demux This change is meant to add a control for disabling early socket demux. The main motivation behind this patch is to provide an option to disable the feature as it adds an additional cost to routing that reduces overall throughput by up to 5%. For example one of my systems went from 12.1Mpps to 11.6 after the early socket demux was added. It looks like the reason for the regression is that we are now having to perform two lookups, first the one for an established socket, and then the one for the routing table. By adding this patch and toggling the value for ip_early_demux to 0 I am able to get back to the 12.1Mpps I was previously seeing. [ Move local variables in ip_rcv_finish() down into the basic block in which they are actually used. -DaveM ] Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- include/linux/sysctl.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index c34b4c82b0dc..20825e5f433f 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -425,6 +425,7 @@ enum NET_TCP_ALLOWED_CONG_CONTROL=123, NET_TCP_MAX_SSTHRESH=124, NET_TCP_FRTO_RESPONSE=125, + NET_IPV4_EARLY_DEMUX=126, }; enum { -- cgit v1.2.3 From dfbce08c19cba2ba4faaf8c0dd6d7678f46c78dd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 22 Jun 2012 23:02:22 -0700 Subject: ipv4: Don't add deprecated new binary sysctl value. Reported-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/sysctl.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 20825e5f433f..c34b4c82b0dc 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -425,7 +425,6 @@ enum NET_TCP_ALLOWED_CONG_CONTROL=123, NET_TCP_MAX_SSTHRESH=124, NET_TCP_FRTO_RESPONSE=125, - NET_IPV4_EARLY_DEMUX=126, }; enum { -- cgit v1.2.3 From c46a019a7941ff92291cda1cc2774bf720552ad9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 19 Jun 2012 16:28:40 +0100 Subject: mfd: arizona: Register definitions Several forthcoming Wolfson devices are based on a common platform known as Arizona allowing a great deal of reuse of driver code. This patch adds register definitions for these devices. Signed-off-by: Mark Brown --- include/linux/mfd/arizona/registers.h | 6222 +++++++++++++++++++++++++++++++++ 1 file changed, 6222 insertions(+) create mode 100644 include/linux/mfd/arizona/registers.h (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h new file mode 100644 index 000000000000..989c47d681e0 --- /dev/null +++ b/include/linux/mfd/arizona/registers.h @@ -0,0 +1,6222 @@ +/* + * ARIZONA register definitions + * + * Copyright 2012 Wolfson Microelectronics plc + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ARIZONA_REGISTERS_H +#define _ARIZONA_REGISTERS_H + +/* + * Register values. + */ +#define ARIZONA_SOFTWARE_RESET 0x00 +#define ARIZONA_DEVICE_REVISION 0x01 +#define ARIZONA_CTRL_IF_SPI_CFG_1 0x08 +#define ARIZONA_CTRL_IF_I2C1_CFG_1 0x09 +#define ARIZONA_CTRL_IF_STATUS_1 0x0D +#define ARIZONA_WRITE_SEQUENCER_CTRL_0 0x16 +#define ARIZONA_WRITE_SEQUENCER_CTRL_1 0x17 +#define ARIZONA_WRITE_SEQUENCER_CTRL_2 0x18 +#define ARIZONA_WRITE_SEQUENCER_PROM 0x1A +#define ARIZONA_TONE_GENERATOR_1 0x20 +#define ARIZONA_TONE_GENERATOR_2 0x21 +#define ARIZONA_TONE_GENERATOR_3 0x22 +#define ARIZONA_TONE_GENERATOR_4 0x23 +#define ARIZONA_TONE_GENERATOR_5 0x24 +#define ARIZONA_PWM_DRIVE_1 0x30 +#define ARIZONA_PWM_DRIVE_2 0x31 +#define ARIZONA_PWM_DRIVE_3 0x32 +#define ARIZONA_WAKE_CONTROL 0x40 +#define ARIZONA_SEQUENCE_CONTROL 0x41 +#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1 0x61 +#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2 0x62 +#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3 0x63 +#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4 0x64 +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1 0x68 +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2 0x69 +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3 0x6A +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4 0x6B +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5 0x6C +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6 0x6D +#define ARIZONA_COMFORT_NOISE_GENERATOR 0x70 +#define ARIZONA_HAPTICS_CONTROL_1 0x90 +#define ARIZONA_HAPTICS_CONTROL_2 0x91 +#define ARIZONA_HAPTICS_PHASE_1_INTENSITY 0x92 +#define ARIZONA_HAPTICS_PHASE_1_DURATION 0x93 +#define ARIZONA_HAPTICS_PHASE_2_INTENSITY 0x94 +#define ARIZONA_HAPTICS_PHASE_2_DURATION 0x95 +#define ARIZONA_HAPTICS_PHASE_3_INTENSITY 0x96 +#define ARIZONA_HAPTICS_PHASE_3_DURATION 0x97 +#define ARIZONA_HAPTICS_STATUS 0x98 +#define ARIZONA_CLOCK_32K_1 0x100 +#define ARIZONA_SYSTEM_CLOCK_1 0x101 +#define ARIZONA_SAMPLE_RATE_1 0x102 +#define ARIZONA_SAMPLE_RATE_2 0x103 +#define ARIZONA_SAMPLE_RATE_3 0x104 +#define ARIZONA_SAMPLE_RATE_1_STATUS 0x10A +#define ARIZONA_SAMPLE_RATE_2_STATUS 0x10B +#define ARIZONA_SAMPLE_RATE_3_STATUS 0x10C +#define ARIZONA_ASYNC_CLOCK_1 0x112 +#define ARIZONA_ASYNC_SAMPLE_RATE_1 0x113 +#define ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS 0x11B +#define ARIZONA_OUTPUT_SYSTEM_CLOCK 0x149 +#define ARIZONA_OUTPUT_ASYNC_CLOCK 0x14A +#define ARIZONA_RATE_ESTIMATOR_1 0x152 +#define ARIZONA_RATE_ESTIMATOR_2 0x153 +#define ARIZONA_RATE_ESTIMATOR_3 0x154 +#define ARIZONA_RATE_ESTIMATOR_4 0x155 +#define ARIZONA_RATE_ESTIMATOR_5 0x156 +#define ARIZONA_FLL1_CONTROL_1 0x171 +#define ARIZONA_FLL1_CONTROL_2 0x172 +#define ARIZONA_FLL1_CONTROL_3 0x173 +#define ARIZONA_FLL1_CONTROL_4 0x174 +#define ARIZONA_FLL1_CONTROL_5 0x175 +#define ARIZONA_FLL1_CONTROL_6 0x176 +#define ARIZONA_FLL1_LOOP_FILTER_TEST_1 0x177 +#define ARIZONA_FLL1_SYNCHRONISER_1 0x181 +#define ARIZONA_FLL1_SYNCHRONISER_2 0x182 +#define ARIZONA_FLL1_SYNCHRONISER_3 0x183 +#define ARIZONA_FLL1_SYNCHRONISER_4 0x184 +#define ARIZONA_FLL1_SYNCHRONISER_5 0x185 +#define ARIZONA_FLL1_SYNCHRONISER_6 0x186 +#define ARIZONA_FLL1_SPREAD_SPECTRUM 0x189 +#define ARIZONA_FLL1_GPIO_CLOCK 0x18A +#define ARIZONA_FLL2_CONTROL_1 0x191 +#define ARIZONA_FLL2_CONTROL_2 0x192 +#define ARIZONA_FLL2_CONTROL_3 0x193 +#define ARIZONA_FLL2_CONTROL_4 0x194 +#define ARIZONA_FLL2_CONTROL_5 0x195 +#define ARIZONA_FLL2_CONTROL_6 0x196 +#define ARIZONA_FLL2_LOOP_FILTER_TEST_1 0x197 +#define ARIZONA_FLL2_SYNCHRONISER_1 0x1A1 +#define ARIZONA_FLL2_SYNCHRONISER_2 0x1A2 +#define ARIZONA_FLL2_SYNCHRONISER_3 0x1A3 +#define ARIZONA_FLL2_SYNCHRONISER_4 0x1A4 +#define ARIZONA_FLL2_SYNCHRONISER_5 0x1A5 +#define ARIZONA_FLL2_SYNCHRONISER_6 0x1A6 +#define ARIZONA_FLL2_SPREAD_SPECTRUM 0x1A9 +#define ARIZONA_FLL2_GPIO_CLOCK 0x1AA +#define ARIZONA_MIC_CHARGE_PUMP_1 0x200 +#define ARIZONA_LDO1_CONTROL_1 0x210 +#define ARIZONA_LDO2_CONTROL_1 0x213 +#define ARIZONA_MIC_BIAS_CTRL_1 0x218 +#define ARIZONA_MIC_BIAS_CTRL_2 0x219 +#define ARIZONA_MIC_BIAS_CTRL_3 0x21A +#define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293 +#define ARIZONA_HEADPHONE_DETECT_1 0x29B +#define ARIZONA_HEADPHONE_DETECT_2 0x29C +#define ARIZONA_MIC_DETECT_1 0x2A3 +#define ARIZONA_MIC_DETECT_2 0x2A4 +#define ARIZONA_MIC_DETECT_3 0x2A5 +#define ARIZONA_MIC_NOISE_MIX_CONTROL_1 0x2C3 +#define ARIZONA_ISOLATION_CONTROL 0x2CB +#define ARIZONA_JACK_DETECT_ANALOGUE 0x2D3 +#define ARIZONA_INPUT_ENABLES 0x300 +#define ARIZONA_INPUT_RATE 0x308 +#define ARIZONA_INPUT_VOLUME_RAMP 0x309 +#define ARIZONA_IN1L_CONTROL 0x310 +#define ARIZONA_ADC_DIGITAL_VOLUME_1L 0x311 +#define ARIZONA_DMIC1L_CONTROL 0x312 +#define ARIZONA_IN1R_CONTROL 0x314 +#define ARIZONA_ADC_DIGITAL_VOLUME_1R 0x315 +#define ARIZONA_DMIC1R_CONTROL 0x316 +#define ARIZONA_IN2L_CONTROL 0x318 +#define ARIZONA_ADC_DIGITAL_VOLUME_2L 0x319 +#define ARIZONA_DMIC2L_CONTROL 0x31A +#define ARIZONA_IN2R_CONTROL 0x31C +#define ARIZONA_ADC_DIGITAL_VOLUME_2R 0x31D +#define ARIZONA_DMIC2R_CONTROL 0x31E +#define ARIZONA_IN3L_CONTROL 0x320 +#define ARIZONA_ADC_DIGITAL_VOLUME_3L 0x321 +#define ARIZONA_DMIC3L_CONTROL 0x322 +#define ARIZONA_IN3R_CONTROL 0x324 +#define ARIZONA_ADC_DIGITAL_VOLUME_3R 0x325 +#define ARIZONA_DMIC3R_CONTROL 0x326 +#define ARIZONA_OUTPUT_ENABLES_1 0x400 +#define ARIZONA_OUTPUT_STATUS_1 0x401 +#define ARIZONA_OUTPUT_RATE_1 0x408 +#define ARIZONA_OUTPUT_VOLUME_RAMP 0x409 +#define ARIZONA_OUTPUT_PATH_CONFIG_1L 0x410 +#define ARIZONA_DAC_DIGITAL_VOLUME_1L 0x411 +#define ARIZONA_DAC_VOLUME_LIMIT_1L 0x412 +#define ARIZONA_NOISE_GATE_SELECT_1L 0x413 +#define ARIZONA_OUTPUT_PATH_CONFIG_1R 0x414 +#define ARIZONA_DAC_DIGITAL_VOLUME_1R 0x415 +#define ARIZONA_DAC_VOLUME_LIMIT_1R 0x416 +#define ARIZONA_NOISE_GATE_SELECT_1R 0x417 +#define ARIZONA_OUTPUT_PATH_CONFIG_2L 0x418 +#define ARIZONA_DAC_DIGITAL_VOLUME_2L 0x419 +#define ARIZONA_DAC_VOLUME_LIMIT_2L 0x41A +#define ARIZONA_NOISE_GATE_SELECT_2L 0x41B +#define ARIZONA_OUTPUT_PATH_CONFIG_2R 0x41C +#define ARIZONA_DAC_DIGITAL_VOLUME_2R 0x41D +#define ARIZONA_DAC_VOLUME_LIMIT_2R 0x41E +#define ARIZONA_NOISE_GATE_SELECT_2R 0x41F +#define ARIZONA_OUTPUT_PATH_CONFIG_3L 0x420 +#define ARIZONA_DAC_DIGITAL_VOLUME_3L 0x421 +#define ARIZONA_DAC_VOLUME_LIMIT_3L 0x422 +#define ARIZONA_NOISE_GATE_SELECT_3L 0x423 +#define ARIZONA_OUTPUT_PATH_CONFIG_3R 0x424 +#define ARIZONA_DAC_DIGITAL_VOLUME_3R 0x425 +#define ARIZONA_DAC_VOLUME_LIMIT_3R 0x426 +#define ARIZONA_OUTPUT_PATH_CONFIG_4L 0x428 +#define ARIZONA_DAC_DIGITAL_VOLUME_4L 0x429 +#define ARIZONA_OUT_VOLUME_4L 0x42A +#define ARIZONA_NOISE_GATE_SELECT_4L 0x42B +#define ARIZONA_OUTPUT_PATH_CONFIG_4R 0x42C +#define ARIZONA_DAC_DIGITAL_VOLUME_4R 0x42D +#define ARIZONA_OUT_VOLUME_4R 0x42E +#define ARIZONA_NOISE_GATE_SELECT_4R 0x42F +#define ARIZONA_OUTPUT_PATH_CONFIG_5L 0x430 +#define ARIZONA_DAC_DIGITAL_VOLUME_5L 0x431 +#define ARIZONA_DAC_VOLUME_LIMIT_5L 0x432 +#define ARIZONA_NOISE_GATE_SELECT_5L 0x433 +#define ARIZONA_OUTPUT_PATH_CONFIG_5R 0x434 +#define ARIZONA_DAC_DIGITAL_VOLUME_5R 0x435 +#define ARIZONA_DAC_VOLUME_LIMIT_5R 0x436 +#define ARIZONA_NOISE_GATE_SELECT_5R 0x437 +#define ARIZONA_DAC_AEC_CONTROL_1 0x450 +#define ARIZONA_NOISE_GATE_CONTROL 0x458 +#define ARIZONA_PDM_SPK1_CTRL_1 0x490 +#define ARIZONA_PDM_SPK1_CTRL_2 0x491 +#define ARIZONA_DAC_COMP_1 0x4DC +#define ARIZONA_DAC_COMP_2 0x4DD +#define ARIZONA_DAC_COMP_3 0x4DE +#define ARIZONA_DAC_COMP_4 0x4DF +#define ARIZONA_AIF1_BCLK_CTRL 0x500 +#define ARIZONA_AIF1_TX_PIN_CTRL 0x501 +#define ARIZONA_AIF1_RX_PIN_CTRL 0x502 +#define ARIZONA_AIF1_RATE_CTRL 0x503 +#define ARIZONA_AIF1_FORMAT 0x504 +#define ARIZONA_AIF1_TX_BCLK_RATE 0x505 +#define ARIZONA_AIF1_RX_BCLK_RATE 0x506 +#define ARIZONA_AIF1_FRAME_CTRL_1 0x507 +#define ARIZONA_AIF1_FRAME_CTRL_2 0x508 +#define ARIZONA_AIF1_FRAME_CTRL_3 0x509 +#define ARIZONA_AIF1_FRAME_CTRL_4 0x50A +#define ARIZONA_AIF1_FRAME_CTRL_5 0x50B +#define ARIZONA_AIF1_FRAME_CTRL_6 0x50C +#define ARIZONA_AIF1_FRAME_CTRL_7 0x50D +#define ARIZONA_AIF1_FRAME_CTRL_8 0x50E +#define ARIZONA_AIF1_FRAME_CTRL_9 0x50F +#define ARIZONA_AIF1_FRAME_CTRL_10 0x510 +#define ARIZONA_AIF1_FRAME_CTRL_11 0x511 +#define ARIZONA_AIF1_FRAME_CTRL_12 0x512 +#define ARIZONA_AIF1_FRAME_CTRL_13 0x513 +#define ARIZONA_AIF1_FRAME_CTRL_14 0x514 +#define ARIZONA_AIF1_FRAME_CTRL_15 0x515 +#define ARIZONA_AIF1_FRAME_CTRL_16 0x516 +#define ARIZONA_AIF1_FRAME_CTRL_17 0x517 +#define ARIZONA_AIF1_FRAME_CTRL_18 0x518 +#define ARIZONA_AIF1_TX_ENABLES 0x519 +#define ARIZONA_AIF1_RX_ENABLES 0x51A +#define ARIZONA_AIF1_FORCE_WRITE 0x51B +#define ARIZONA_AIF2_BCLK_CTRL 0x540 +#define ARIZONA_AIF2_TX_PIN_CTRL 0x541 +#define ARIZONA_AIF2_RX_PIN_CTRL 0x542 +#define ARIZONA_AIF2_RATE_CTRL 0x543 +#define ARIZONA_AIF2_FORMAT 0x544 +#define ARIZONA_AIF2_TX_BCLK_RATE 0x545 +#define ARIZONA_AIF2_RX_BCLK_RATE 0x546 +#define ARIZONA_AIF2_FRAME_CTRL_1 0x547 +#define ARIZONA_AIF2_FRAME_CTRL_2 0x548 +#define ARIZONA_AIF2_FRAME_CTRL_3 0x549 +#define ARIZONA_AIF2_FRAME_CTRL_4 0x54A +#define ARIZONA_AIF2_FRAME_CTRL_11 0x551 +#define ARIZONA_AIF2_FRAME_CTRL_12 0x552 +#define ARIZONA_AIF2_TX_ENABLES 0x559 +#define ARIZONA_AIF2_RX_ENABLES 0x55A +#define ARIZONA_AIF2_FORCE_WRITE 0x55B +#define ARIZONA_AIF3_BCLK_CTRL 0x580 +#define ARIZONA_AIF3_TX_PIN_CTRL 0x581 +#define ARIZONA_AIF3_RX_PIN_CTRL 0x582 +#define ARIZONA_AIF3_RATE_CTRL 0x583 +#define ARIZONA_AIF3_FORMAT 0x584 +#define ARIZONA_AIF3_TX_BCLK_RATE 0x585 +#define ARIZONA_AIF3_RX_BCLK_RATE 0x586 +#define ARIZONA_AIF3_FRAME_CTRL_1 0x587 +#define ARIZONA_AIF3_FRAME_CTRL_2 0x588 +#define ARIZONA_AIF3_FRAME_CTRL_3 0x589 +#define ARIZONA_AIF3_FRAME_CTRL_4 0x58A +#define ARIZONA_AIF3_FRAME_CTRL_11 0x591 +#define ARIZONA_AIF3_FRAME_CTRL_12 0x592 +#define ARIZONA_AIF3_TX_ENABLES 0x599 +#define ARIZONA_AIF3_RX_ENABLES 0x59A +#define ARIZONA_AIF3_FORCE_WRITE 0x59B +#define ARIZONA_SLIMBUS_FRAMER_REF_GEAR 0x5E3 +#define ARIZONA_SLIMBUS_RATES_1 0x5E5 +#define ARIZONA_SLIMBUS_RATES_2 0x5E6 +#define ARIZONA_SLIMBUS_RATES_3 0x5E7 +#define ARIZONA_SLIMBUS_RATES_4 0x5E8 +#define ARIZONA_SLIMBUS_RATES_5 0x5E9 +#define ARIZONA_SLIMBUS_RATES_6 0x5EA +#define ARIZONA_SLIMBUS_RATES_7 0x5EB +#define ARIZONA_SLIMBUS_RATES_8 0x5EC +#define ARIZONA_SLIMBUS_RX_CHANNEL_ENABLE 0x5F5 +#define ARIZONA_SLIMBUS_TX_CHANNEL_ENABLE 0x5F6 +#define ARIZONA_SLIMBUS_RX_PORT_STATUS 0x5F7 +#define ARIZONA_SLIMBUS_TX_PORT_STATUS 0x5F8 +#define ARIZONA_PWM1MIX_INPUT_1_SOURCE 0x640 +#define ARIZONA_PWM1MIX_INPUT_1_VOLUME 0x641 +#define ARIZONA_PWM1MIX_INPUT_2_SOURCE 0x642 +#define ARIZONA_PWM1MIX_INPUT_2_VOLUME 0x643 +#define ARIZONA_PWM1MIX_INPUT_3_SOURCE 0x644 +#define ARIZONA_PWM1MIX_INPUT_3_VOLUME 0x645 +#define ARIZONA_PWM1MIX_INPUT_4_SOURCE 0x646 +#define ARIZONA_PWM1MIX_INPUT_4_VOLUME 0x647 +#define ARIZONA_PWM2MIX_INPUT_1_SOURCE 0x648 +#define ARIZONA_PWM2MIX_INPUT_1_VOLUME 0x649 +#define ARIZONA_PWM2MIX_INPUT_2_SOURCE 0x64A +#define ARIZONA_PWM2MIX_INPUT_2_VOLUME 0x64B +#define ARIZONA_PWM2MIX_INPUT_3_SOURCE 0x64C +#define ARIZONA_PWM2MIX_INPUT_3_VOLUME 0x64D +#define ARIZONA_PWM2MIX_INPUT_4_SOURCE 0x64E +#define ARIZONA_PWM2MIX_INPUT_4_VOLUME 0x64F +#define ARIZONA_MICMIX_INPUT_1_SOURCE 0x660 +#define ARIZONA_MICMIX_INPUT_1_VOLUME 0x661 +#define ARIZONA_MICMIX_INPUT_2_SOURCE 0x662 +#define ARIZONA_MICMIX_INPUT_2_VOLUME 0x663 +#define ARIZONA_MICMIX_INPUT_3_SOURCE 0x664 +#define ARIZONA_MICMIX_INPUT_3_VOLUME 0x665 +#define ARIZONA_MICMIX_INPUT_4_SOURCE 0x666 +#define ARIZONA_MICMIX_INPUT_4_VOLUME 0x667 +#define ARIZONA_NOISEMIX_INPUT_1_SOURCE 0x668 +#define ARIZONA_NOISEMIX_INPUT_1_VOLUME 0x669 +#define ARIZONA_NOISEMIX_INPUT_2_SOURCE 0x66A +#define ARIZONA_NOISEMIX_INPUT_2_VOLUME 0x66B +#define ARIZONA_NOISEMIX_INPUT_3_SOURCE 0x66C +#define ARIZONA_NOISEMIX_INPUT_3_VOLUME 0x66D +#define ARIZONA_NOISEMIX_INPUT_4_SOURCE 0x66E +#define ARIZONA_NOISEMIX_INPUT_4_VOLUME 0x66F +#define ARIZONA_OUT1LMIX_INPUT_1_SOURCE 0x680 +#define ARIZONA_OUT1LMIX_INPUT_1_VOLUME 0x681 +#define ARIZONA_OUT1LMIX_INPUT_2_SOURCE 0x682 +#define ARIZONA_OUT1LMIX_INPUT_2_VOLUME 0x683 +#define ARIZONA_OUT1LMIX_INPUT_3_SOURCE 0x684 +#define ARIZONA_OUT1LMIX_INPUT_3_VOLUME 0x685 +#define ARIZONA_OUT1LMIX_INPUT_4_SOURCE 0x686 +#define ARIZONA_OUT1LMIX_INPUT_4_VOLUME 0x687 +#define ARIZONA_OUT1RMIX_INPUT_1_SOURCE 0x688 +#define ARIZONA_OUT1RMIX_INPUT_1_VOLUME 0x689 +#define ARIZONA_OUT1RMIX_INPUT_2_SOURCE 0x68A +#define ARIZONA_OUT1RMIX_INPUT_2_VOLUME 0x68B +#define ARIZONA_OUT1RMIX_INPUT_3_SOURCE 0x68C +#define ARIZONA_OUT1RMIX_INPUT_3_VOLUME 0x68D +#define ARIZONA_OUT1RMIX_INPUT_4_SOURCE 0x68E +#define ARIZONA_OUT1RMIX_INPUT_4_VOLUME 0x68F +#define ARIZONA_OUT2LMIX_INPUT_1_SOURCE 0x690 +#define ARIZONA_OUT2LMIX_INPUT_1_VOLUME 0x691 +#define ARIZONA_OUT2LMIX_INPUT_2_SOURCE 0x692 +#define ARIZONA_OUT2LMIX_INPUT_2_VOLUME 0x693 +#define ARIZONA_OUT2LMIX_INPUT_3_SOURCE 0x694 +#define ARIZONA_OUT2LMIX_INPUT_3_VOLUME 0x695 +#define ARIZONA_OUT2LMIX_INPUT_4_SOURCE 0x696 +#define ARIZONA_OUT2LMIX_INPUT_4_VOLUME 0x697 +#define ARIZONA_OUT2RMIX_INPUT_1_SOURCE 0x698 +#define ARIZONA_OUT2RMIX_INPUT_1_VOLUME 0x699 +#define ARIZONA_OUT2RMIX_INPUT_2_SOURCE 0x69A +#define ARIZONA_OUT2RMIX_INPUT_2_VOLUME 0x69B +#define ARIZONA_OUT2RMIX_INPUT_3_SOURCE 0x69C +#define ARIZONA_OUT2RMIX_INPUT_3_VOLUME 0x69D +#define ARIZONA_OUT2RMIX_INPUT_4_SOURCE 0x69E +#define ARIZONA_OUT2RMIX_INPUT_4_VOLUME 0x69F +#define ARIZONA_OUT3LMIX_INPUT_1_SOURCE 0x6A0 +#define ARIZONA_OUT3LMIX_INPUT_1_VOLUME 0x6A1 +#define ARIZONA_OUT3LMIX_INPUT_2_SOURCE 0x6A2 +#define ARIZONA_OUT3LMIX_INPUT_2_VOLUME 0x6A3 +#define ARIZONA_OUT3LMIX_INPUT_3_SOURCE 0x6A4 +#define ARIZONA_OUT3LMIX_INPUT_3_VOLUME 0x6A5 +#define ARIZONA_OUT3LMIX_INPUT_4_SOURCE 0x6A6 +#define ARIZONA_OUT3LMIX_INPUT_4_VOLUME 0x6A7 +#define ARIZONA_OUT4LMIX_INPUT_1_SOURCE 0x6B0 +#define ARIZONA_OUT4LMIX_INPUT_1_VOLUME 0x6B1 +#define ARIZONA_OUT4LMIX_INPUT_2_SOURCE 0x6B2 +#define ARIZONA_OUT4LMIX_INPUT_2_VOLUME 0x6B3 +#define ARIZONA_OUT4LMIX_INPUT_3_SOURCE 0x6B4 +#define ARIZONA_OUT4LMIX_INPUT_3_VOLUME 0x6B5 +#define ARIZONA_OUT4LMIX_INPUT_4_SOURCE 0x6B6 +#define ARIZONA_OUT4LMIX_INPUT_4_VOLUME 0x6B7 +#define ARIZONA_OUT4RMIX_INPUT_1_SOURCE 0x6B8 +#define ARIZONA_OUT4RMIX_INPUT_1_VOLUME 0x6B9 +#define ARIZONA_OUT4RMIX_INPUT_2_SOURCE 0x6BA +#define ARIZONA_OUT4RMIX_INPUT_2_VOLUME 0x6BB +#define ARIZONA_OUT4RMIX_INPUT_3_SOURCE 0x6BC +#define ARIZONA_OUT4RMIX_INPUT_3_VOLUME 0x6BD +#define ARIZONA_OUT4RMIX_INPUT_4_SOURCE 0x6BE +#define ARIZONA_OUT4RMIX_INPUT_4_VOLUME 0x6BF +#define ARIZONA_OUT5LMIX_INPUT_1_SOURCE 0x6C0 +#define ARIZONA_OUT5LMIX_INPUT_1_VOLUME 0x6C1 +#define ARIZONA_OUT5LMIX_INPUT_2_SOURCE 0x6C2 +#define ARIZONA_OUT5LMIX_INPUT_2_VOLUME 0x6C3 +#define ARIZONA_OUT5LMIX_INPUT_3_SOURCE 0x6C4 +#define ARIZONA_OUT5LMIX_INPUT_3_VOLUME 0x6C5 +#define ARIZONA_OUT5LMIX_INPUT_4_SOURCE 0x6C6 +#define ARIZONA_OUT5LMIX_INPUT_4_VOLUME 0x6C7 +#define ARIZONA_OUT5RMIX_INPUT_1_SOURCE 0x6C8 +#define ARIZONA_OUT5RMIX_INPUT_1_VOLUME 0x6C9 +#define ARIZONA_OUT5RMIX_INPUT_2_SOURCE 0x6CA +#define ARIZONA_OUT5RMIX_INPUT_2_VOLUME 0x6CB +#define ARIZONA_OUT5RMIX_INPUT_3_SOURCE 0x6CC +#define ARIZONA_OUT5RMIX_INPUT_3_VOLUME 0x6CD +#define ARIZONA_OUT5RMIX_INPUT_4_SOURCE 0x6CE +#define ARIZONA_OUT5RMIX_INPUT_4_VOLUME 0x6CF +#define ARIZONA_AIF1TX1MIX_INPUT_1_SOURCE 0x700 +#define ARIZONA_AIF1TX1MIX_INPUT_1_VOLUME 0x701 +#define ARIZONA_AIF1TX1MIX_INPUT_2_SOURCE 0x702 +#define ARIZONA_AIF1TX1MIX_INPUT_2_VOLUME 0x703 +#define ARIZONA_AIF1TX1MIX_INPUT_3_SOURCE 0x704 +#define ARIZONA_AIF1TX1MIX_INPUT_3_VOLUME 0x705 +#define ARIZONA_AIF1TX1MIX_INPUT_4_SOURCE 0x706 +#define ARIZONA_AIF1TX1MIX_INPUT_4_VOLUME 0x707 +#define ARIZONA_AIF1TX2MIX_INPUT_1_SOURCE 0x708 +#define ARIZONA_AIF1TX2MIX_INPUT_1_VOLUME 0x709 +#define ARIZONA_AIF1TX2MIX_INPUT_2_SOURCE 0x70A +#define ARIZONA_AIF1TX2MIX_INPUT_2_VOLUME 0x70B +#define ARIZONA_AIF1TX2MIX_INPUT_3_SOURCE 0x70C +#define ARIZONA_AIF1TX2MIX_INPUT_3_VOLUME 0x70D +#define ARIZONA_AIF1TX2MIX_INPUT_4_SOURCE 0x70E +#define ARIZONA_AIF1TX2MIX_INPUT_4_VOLUME 0x70F +#define ARIZONA_AIF1TX3MIX_INPUT_1_SOURCE 0x710 +#define ARIZONA_AIF1TX3MIX_INPUT_1_VOLUME 0x711 +#define ARIZONA_AIF1TX3MIX_INPUT_2_SOURCE 0x712 +#define ARIZONA_AIF1TX3MIX_INPUT_2_VOLUME 0x713 +#define ARIZONA_AIF1TX3MIX_INPUT_3_SOURCE 0x714 +#define ARIZONA_AIF1TX3MIX_INPUT_3_VOLUME 0x715 +#define ARIZONA_AIF1TX3MIX_INPUT_4_SOURCE 0x716 +#define ARIZONA_AIF1TX3MIX_INPUT_4_VOLUME 0x717 +#define ARIZONA_AIF1TX4MIX_INPUT_1_SOURCE 0x718 +#define ARIZONA_AIF1TX4MIX_INPUT_1_VOLUME 0x719 +#define ARIZONA_AIF1TX4MIX_INPUT_2_SOURCE 0x71A +#define ARIZONA_AIF1TX4MIX_INPUT_2_VOLUME 0x71B +#define ARIZONA_AIF1TX4MIX_INPUT_3_SOURCE 0x71C +#define ARIZONA_AIF1TX4MIX_INPUT_3_VOLUME 0x71D +#define ARIZONA_AIF1TX4MIX_INPUT_4_SOURCE 0x71E +#define ARIZONA_AIF1TX4MIX_INPUT_4_VOLUME 0x71F +#define ARIZONA_AIF1TX5MIX_INPUT_1_SOURCE 0x720 +#define ARIZONA_AIF1TX5MIX_INPUT_1_VOLUME 0x721 +#define ARIZONA_AIF1TX5MIX_INPUT_2_SOURCE 0x722 +#define ARIZONA_AIF1TX5MIX_INPUT_2_VOLUME 0x723 +#define ARIZONA_AIF1TX5MIX_INPUT_3_SOURCE 0x724 +#define ARIZONA_AIF1TX5MIX_INPUT_3_VOLUME 0x725 +#define ARIZONA_AIF1TX5MIX_INPUT_4_SOURCE 0x726 +#define ARIZONA_AIF1TX5MIX_INPUT_4_VOLUME 0x727 +#define ARIZONA_AIF1TX6MIX_INPUT_1_SOURCE 0x728 +#define ARIZONA_AIF1TX6MIX_INPUT_1_VOLUME 0x729 +#define ARIZONA_AIF1TX6MIX_INPUT_2_SOURCE 0x72A +#define ARIZONA_AIF1TX6MIX_INPUT_2_VOLUME 0x72B +#define ARIZONA_AIF1TX6MIX_INPUT_3_SOURCE 0x72C +#define ARIZONA_AIF1TX6MIX_INPUT_3_VOLUME 0x72D +#define ARIZONA_AIF1TX6MIX_INPUT_4_SOURCE 0x72E +#define ARIZONA_AIF1TX6MIX_INPUT_4_VOLUME 0x72F +#define ARIZONA_AIF1TX7MIX_INPUT_1_SOURCE 0x730 +#define ARIZONA_AIF1TX7MIX_INPUT_1_VOLUME 0x731 +#define ARIZONA_AIF1TX7MIX_INPUT_2_SOURCE 0x732 +#define ARIZONA_AIF1TX7MIX_INPUT_2_VOLUME 0x733 +#define ARIZONA_AIF1TX7MIX_INPUT_3_SOURCE 0x734 +#define ARIZONA_AIF1TX7MIX_INPUT_3_VOLUME 0x735 +#define ARIZONA_AIF1TX7MIX_INPUT_4_SOURCE 0x736 +#define ARIZONA_AIF1TX7MIX_INPUT_4_VOLUME 0x737 +#define ARIZONA_AIF1TX8MIX_INPUT_1_SOURCE 0x738 +#define ARIZONA_AIF1TX8MIX_INPUT_1_VOLUME 0x739 +#define ARIZONA_AIF1TX8MIX_INPUT_2_SOURCE 0x73A +#define ARIZONA_AIF1TX8MIX_INPUT_2_VOLUME 0x73B +#define ARIZONA_AIF1TX8MIX_INPUT_3_SOURCE 0x73C +#define ARIZONA_AIF1TX8MIX_INPUT_3_VOLUME 0x73D +#define ARIZONA_AIF1TX8MIX_INPUT_4_SOURCE 0x73E +#define ARIZONA_AIF1TX8MIX_INPUT_4_VOLUME 0x73F +#define ARIZONA_AIF2TX1MIX_INPUT_1_SOURCE 0x740 +#define ARIZONA_AIF2TX1MIX_INPUT_1_VOLUME 0x741 +#define ARIZONA_AIF2TX1MIX_INPUT_2_SOURCE 0x742 +#define ARIZONA_AIF2TX1MIX_INPUT_2_VOLUME 0x743 +#define ARIZONA_AIF2TX1MIX_INPUT_3_SOURCE 0x744 +#define ARIZONA_AIF2TX1MIX_INPUT_3_VOLUME 0x745 +#define ARIZONA_AIF2TX1MIX_INPUT_4_SOURCE 0x746 +#define ARIZONA_AIF2TX1MIX_INPUT_4_VOLUME 0x747 +#define ARIZONA_AIF2TX2MIX_INPUT_1_SOURCE 0x748 +#define ARIZONA_AIF2TX2MIX_INPUT_1_VOLUME 0x749 +#define ARIZONA_AIF2TX2MIX_INPUT_2_SOURCE 0x74A +#define ARIZONA_AIF2TX2MIX_INPUT_2_VOLUME 0x74B +#define ARIZONA_AIF2TX2MIX_INPUT_3_SOURCE 0x74C +#define ARIZONA_AIF2TX2MIX_INPUT_3_VOLUME 0x74D +#define ARIZONA_AIF2TX2MIX_INPUT_4_SOURCE 0x74E +#define ARIZONA_AIF2TX2MIX_INPUT_4_VOLUME 0x74F +#define ARIZONA_AIF3TX1MIX_INPUT_1_SOURCE 0x780 +#define ARIZONA_AIF3TX1MIX_INPUT_1_VOLUME 0x781 +#define ARIZONA_AIF3TX1MIX_INPUT_2_SOURCE 0x782 +#define ARIZONA_AIF3TX1MIX_INPUT_2_VOLUME 0x783 +#define ARIZONA_AIF3TX1MIX_INPUT_3_SOURCE 0x784 +#define ARIZONA_AIF3TX1MIX_INPUT_3_VOLUME 0x785 +#define ARIZONA_AIF3TX1MIX_INPUT_4_SOURCE 0x786 +#define ARIZONA_AIF3TX1MIX_INPUT_4_VOLUME 0x787 +#define ARIZONA_AIF3TX2MIX_INPUT_1_SOURCE 0x788 +#define ARIZONA_AIF3TX2MIX_INPUT_1_VOLUME 0x789 +#define ARIZONA_AIF3TX2MIX_INPUT_2_SOURCE 0x78A +#define ARIZONA_AIF3TX2MIX_INPUT_2_VOLUME 0x78B +#define ARIZONA_AIF3TX2MIX_INPUT_3_SOURCE 0x78C +#define ARIZONA_AIF3TX2MIX_INPUT_3_VOLUME 0x78D +#define ARIZONA_AIF3TX2MIX_INPUT_4_SOURCE 0x78E +#define ARIZONA_AIF3TX2MIX_INPUT_4_VOLUME 0x78F +#define ARIZONA_SLIMTX1MIX_INPUT_1_SOURCE 0x7C0 +#define ARIZONA_SLIMTX1MIX_INPUT_1_VOLUME 0x7C1 +#define ARIZONA_SLIMTX1MIX_INPUT_2_SOURCE 0x7C2 +#define ARIZONA_SLIMTX1MIX_INPUT_2_VOLUME 0x7C3 +#define ARIZONA_SLIMTX1MIX_INPUT_3_SOURCE 0x7C4 +#define ARIZONA_SLIMTX1MIX_INPUT_3_VOLUME 0x7C5 +#define ARIZONA_SLIMTX1MIX_INPUT_4_SOURCE 0x7C6 +#define ARIZONA_SLIMTX1MIX_INPUT_4_VOLUME 0x7C7 +#define ARIZONA_SLIMTX2MIX_INPUT_1_SOURCE 0x7C8 +#define ARIZONA_SLIMTX2MIX_INPUT_1_VOLUME 0x7C9 +#define ARIZONA_SLIMTX2MIX_INPUT_2_SOURCE 0x7CA +#define ARIZONA_SLIMTX2MIX_INPUT_2_VOLUME 0x7CB +#define ARIZONA_SLIMTX2MIX_INPUT_3_SOURCE 0x7CC +#define ARIZONA_SLIMTX2MIX_INPUT_3_VOLUME 0x7CD +#define ARIZONA_SLIMTX2MIX_INPUT_4_SOURCE 0x7CE +#define ARIZONA_SLIMTX2MIX_INPUT_4_VOLUME 0x7CF +#define ARIZONA_SLIMTX3MIX_INPUT_1_SOURCE 0x7D0 +#define ARIZONA_SLIMTX3MIX_INPUT_1_VOLUME 0x7D1 +#define ARIZONA_SLIMTX3MIX_INPUT_2_SOURCE 0x7D2 +#define ARIZONA_SLIMTX3MIX_INPUT_2_VOLUME 0x7D3 +#define ARIZONA_SLIMTX3MIX_INPUT_3_SOURCE 0x7D4 +#define ARIZONA_SLIMTX3MIX_INPUT_3_VOLUME 0x7D5 +#define ARIZONA_SLIMTX3MIX_INPUT_4_SOURCE 0x7D6 +#define ARIZONA_SLIMTX3MIX_INPUT_4_VOLUME 0x7D7 +#define ARIZONA_SLIMTX4MIX_INPUT_1_SOURCE 0x7D8 +#define ARIZONA_SLIMTX4MIX_INPUT_1_VOLUME 0x7D9 +#define ARIZONA_SLIMTX4MIX_INPUT_2_SOURCE 0x7DA +#define ARIZONA_SLIMTX4MIX_INPUT_2_VOLUME 0x7DB +#define ARIZONA_SLIMTX4MIX_INPUT_3_SOURCE 0x7DC +#define ARIZONA_SLIMTX4MIX_INPUT_3_VOLUME 0x7DD +#define ARIZONA_SLIMTX4MIX_INPUT_4_SOURCE 0x7DE +#define ARIZONA_SLIMTX4MIX_INPUT_4_VOLUME 0x7DF +#define ARIZONA_SLIMTX5MIX_INPUT_1_SOURCE 0x7E0 +#define ARIZONA_SLIMTX5MIX_INPUT_1_VOLUME 0x7E1 +#define ARIZONA_SLIMTX5MIX_INPUT_2_SOURCE 0x7E2 +#define ARIZONA_SLIMTX5MIX_INPUT_2_VOLUME 0x7E3 +#define ARIZONA_SLIMTX5MIX_INPUT_3_SOURCE 0x7E4 +#define ARIZONA_SLIMTX5MIX_INPUT_3_VOLUME 0x7E5 +#define ARIZONA_SLIMTX5MIX_INPUT_4_SOURCE 0x7E6 +#define ARIZONA_SLIMTX5MIX_INPUT_4_VOLUME 0x7E7 +#define ARIZONA_SLIMTX6MIX_INPUT_1_SOURCE 0x7E8 +#define ARIZONA_SLIMTX6MIX_INPUT_1_VOLUME 0x7E9 +#define ARIZONA_SLIMTX6MIX_INPUT_2_SOURCE 0x7EA +#define ARIZONA_SLIMTX6MIX_INPUT_2_VOLUME 0x7EB +#define ARIZONA_SLIMTX6MIX_INPUT_3_SOURCE 0x7EC +#define ARIZONA_SLIMTX6MIX_INPUT_3_VOLUME 0x7ED +#define ARIZONA_SLIMTX6MIX_INPUT_4_SOURCE 0x7EE +#define ARIZONA_SLIMTX6MIX_INPUT_4_VOLUME 0x7EF +#define ARIZONA_SLIMTX7MIX_INPUT_1_SOURCE 0x7F0 +#define ARIZONA_SLIMTX7MIX_INPUT_1_VOLUME 0x7F1 +#define ARIZONA_SLIMTX7MIX_INPUT_2_SOURCE 0x7F2 +#define ARIZONA_SLIMTX7MIX_INPUT_2_VOLUME 0x7F3 +#define ARIZONA_SLIMTX7MIX_INPUT_3_SOURCE 0x7F4 +#define ARIZONA_SLIMTX7MIX_INPUT_3_VOLUME 0x7F5 +#define ARIZONA_SLIMTX7MIX_INPUT_4_SOURCE 0x7F6 +#define ARIZONA_SLIMTX7MIX_INPUT_4_VOLUME 0x7F7 +#define ARIZONA_SLIMTX8MIX_INPUT_1_SOURCE 0x7F8 +#define ARIZONA_SLIMTX8MIX_INPUT_1_VOLUME 0x7F9 +#define ARIZONA_SLIMTX8MIX_INPUT_2_SOURCE 0x7FA +#define ARIZONA_SLIMTX8MIX_INPUT_2_VOLUME 0x7FB +#define ARIZONA_SLIMTX8MIX_INPUT_3_SOURCE 0x7FC +#define ARIZONA_SLIMTX8MIX_INPUT_3_VOLUME 0x7FD +#define ARIZONA_SLIMTX8MIX_INPUT_4_SOURCE 0x7FE +#define ARIZONA_SLIMTX8MIX_INPUT_4_VOLUME 0x7FF +#define ARIZONA_EQ1MIX_INPUT_1_SOURCE 0x880 +#define ARIZONA_EQ1MIX_INPUT_1_VOLUME 0x881 +#define ARIZONA_EQ1MIX_INPUT_2_SOURCE 0x882 +#define ARIZONA_EQ1MIX_INPUT_2_VOLUME 0x883 +#define ARIZONA_EQ1MIX_INPUT_3_SOURCE 0x884 +#define ARIZONA_EQ1MIX_INPUT_3_VOLUME 0x885 +#define ARIZONA_EQ1MIX_INPUT_4_SOURCE 0x886 +#define ARIZONA_EQ1MIX_INPUT_4_VOLUME 0x887 +#define ARIZONA_EQ2MIX_INPUT_1_SOURCE 0x888 +#define ARIZONA_EQ2MIX_INPUT_1_VOLUME 0x889 +#define ARIZONA_EQ2MIX_INPUT_2_SOURCE 0x88A +#define ARIZONA_EQ2MIX_INPUT_2_VOLUME 0x88B +#define ARIZONA_EQ2MIX_INPUT_3_SOURCE 0x88C +#define ARIZONA_EQ2MIX_INPUT_3_VOLUME 0x88D +#define ARIZONA_EQ2MIX_INPUT_4_SOURCE 0x88E +#define ARIZONA_EQ2MIX_INPUT_4_VOLUME 0x88F +#define ARIZONA_EQ3MIX_INPUT_1_SOURCE 0x890 +#define ARIZONA_EQ3MIX_INPUT_1_VOLUME 0x891 +#define ARIZONA_EQ3MIX_INPUT_2_SOURCE 0x892 +#define ARIZONA_EQ3MIX_INPUT_2_VOLUME 0x893 +#define ARIZONA_EQ3MIX_INPUT_3_SOURCE 0x894 +#define ARIZONA_EQ3MIX_INPUT_3_VOLUME 0x895 +#define ARIZONA_EQ3MIX_INPUT_4_SOURCE 0x896 +#define ARIZONA_EQ3MIX_INPUT_4_VOLUME 0x897 +#define ARIZONA_EQ4MIX_INPUT_1_SOURCE 0x898 +#define ARIZONA_EQ4MIX_INPUT_1_VOLUME 0x899 +#define ARIZONA_EQ4MIX_INPUT_2_SOURCE 0x89A +#define ARIZONA_EQ4MIX_INPUT_2_VOLUME 0x89B +#define ARIZONA_EQ4MIX_INPUT_3_SOURCE 0x89C +#define ARIZONA_EQ4MIX_INPUT_3_VOLUME 0x89D +#define ARIZONA_EQ4MIX_INPUT_4_SOURCE 0x89E +#define ARIZONA_EQ4MIX_INPUT_4_VOLUME 0x89F +#define ARIZONA_DRC1LMIX_INPUT_1_SOURCE 0x8C0 +#define ARIZONA_DRC1LMIX_INPUT_1_VOLUME 0x8C1 +#define ARIZONA_DRC1LMIX_INPUT_2_SOURCE 0x8C2 +#define ARIZONA_DRC1LMIX_INPUT_2_VOLUME 0x8C3 +#define ARIZONA_DRC1LMIX_INPUT_3_SOURCE 0x8C4 +#define ARIZONA_DRC1LMIX_INPUT_3_VOLUME 0x8C5 +#define ARIZONA_DRC1LMIX_INPUT_4_SOURCE 0x8C6 +#define ARIZONA_DRC1LMIX_INPUT_4_VOLUME 0x8C7 +#define ARIZONA_DRC1RMIX_INPUT_1_SOURCE 0x8C8 +#define ARIZONA_DRC1RMIX_INPUT_1_VOLUME 0x8C9 +#define ARIZONA_DRC1RMIX_INPUT_2_SOURCE 0x8CA +#define ARIZONA_DRC1RMIX_INPUT_2_VOLUME 0x8CB +#define ARIZONA_DRC1RMIX_INPUT_3_SOURCE 0x8CC +#define ARIZONA_DRC1RMIX_INPUT_3_VOLUME 0x8CD +#define ARIZONA_DRC1RMIX_INPUT_4_SOURCE 0x8CE +#define ARIZONA_DRC1RMIX_INPUT_4_VOLUME 0x8CF +#define ARIZONA_DRC2LMIX_INPUT_1_SOURCE 0x8D0 +#define ARIZONA_DRC2LMIX_INPUT_1_VOLUME 0x8D1 +#define ARIZONA_DRC2LMIX_INPUT_2_SOURCE 0x8D2 +#define ARIZONA_DRC2LMIX_INPUT_2_VOLUME 0x8D3 +#define ARIZONA_DRC2LMIX_INPUT_3_SOURCE 0x8D4 +#define ARIZONA_DRC2LMIX_INPUT_3_VOLUME 0x8D5 +#define ARIZONA_DRC2LMIX_INPUT_4_SOURCE 0x8D6 +#define ARIZONA_DRC2LMIX_INPUT_4_VOLUME 0x8D7 +#define ARIZONA_DRC2RMIX_INPUT_1_SOURCE 0x8D8 +#define ARIZONA_DRC2RMIX_INPUT_1_VOLUME 0x8D9 +#define ARIZONA_DRC2RMIX_INPUT_2_SOURCE 0x8DA +#define ARIZONA_DRC2RMIX_INPUT_2_VOLUME 0x8DB +#define ARIZONA_DRC2RMIX_INPUT_3_SOURCE 0x8DC +#define ARIZONA_DRC2RMIX_INPUT_3_VOLUME 0x8DD +#define ARIZONA_DRC2RMIX_INPUT_4_SOURCE 0x8DE +#define ARIZONA_DRC2RMIX_INPUT_4_VOLUME 0x8DF +#define ARIZONA_HPLP1MIX_INPUT_1_SOURCE 0x900 +#define ARIZONA_HPLP1MIX_INPUT_1_VOLUME 0x901 +#define ARIZONA_HPLP1MIX_INPUT_2_SOURCE 0x902 +#define ARIZONA_HPLP1MIX_INPUT_2_VOLUME 0x903 +#define ARIZONA_HPLP1MIX_INPUT_3_SOURCE 0x904 +#define ARIZONA_HPLP1MIX_INPUT_3_VOLUME 0x905 +#define ARIZONA_HPLP1MIX_INPUT_4_SOURCE 0x906 +#define ARIZONA_HPLP1MIX_INPUT_4_VOLUME 0x907 +#define ARIZONA_HPLP2MIX_INPUT_1_SOURCE 0x908 +#define ARIZONA_HPLP2MIX_INPUT_1_VOLUME 0x909 +#define ARIZONA_HPLP2MIX_INPUT_2_SOURCE 0x90A +#define ARIZONA_HPLP2MIX_INPUT_2_VOLUME 0x90B +#define ARIZONA_HPLP2MIX_INPUT_3_SOURCE 0x90C +#define ARIZONA_HPLP2MIX_INPUT_3_VOLUME 0x90D +#define ARIZONA_HPLP2MIX_INPUT_4_SOURCE 0x90E +#define ARIZONA_HPLP2MIX_INPUT_4_VOLUME 0x90F +#define ARIZONA_HPLP3MIX_INPUT_1_SOURCE 0x910 +#define ARIZONA_HPLP3MIX_INPUT_1_VOLUME 0x911 +#define ARIZONA_HPLP3MIX_INPUT_2_SOURCE 0x912 +#define ARIZONA_HPLP3MIX_INPUT_2_VOLUME 0x913 +#define ARIZONA_HPLP3MIX_INPUT_3_SOURCE 0x914 +#define ARIZONA_HPLP3MIX_INPUT_3_VOLUME 0x915 +#define ARIZONA_HPLP3MIX_INPUT_4_SOURCE 0x916 +#define ARIZONA_HPLP3MIX_INPUT_4_VOLUME 0x917 +#define ARIZONA_HPLP4MIX_INPUT_1_SOURCE 0x918 +#define ARIZONA_HPLP4MIX_INPUT_1_VOLUME 0x919 +#define ARIZONA_HPLP4MIX_INPUT_2_SOURCE 0x91A +#define ARIZONA_HPLP4MIX_INPUT_2_VOLUME 0x91B +#define ARIZONA_HPLP4MIX_INPUT_3_SOURCE 0x91C +#define ARIZONA_HPLP4MIX_INPUT_3_VOLUME 0x91D +#define ARIZONA_HPLP4MIX_INPUT_4_SOURCE 0x91E +#define ARIZONA_HPLP4MIX_INPUT_4_VOLUME 0x91F +#define ARIZONA_DSP1LMIX_INPUT_1_SOURCE 0x940 +#define ARIZONA_DSP1LMIX_INPUT_1_VOLUME 0x941 +#define ARIZONA_DSP1LMIX_INPUT_2_SOURCE 0x942 +#define ARIZONA_DSP1LMIX_INPUT_2_VOLUME 0x943 +#define ARIZONA_DSP1LMIX_INPUT_3_SOURCE 0x944 +#define ARIZONA_DSP1LMIX_INPUT_3_VOLUME 0x945 +#define ARIZONA_DSP1LMIX_INPUT_4_SOURCE 0x946 +#define ARIZONA_DSP1LMIX_INPUT_4_VOLUME 0x947 +#define ARIZONA_DSP1RMIX_INPUT_1_SOURCE 0x948 +#define ARIZONA_DSP1RMIX_INPUT_1_VOLUME 0x949 +#define ARIZONA_DSP1RMIX_INPUT_2_SOURCE 0x94A +#define ARIZONA_DSP1RMIX_INPUT_2_VOLUME 0x94B +#define ARIZONA_DSP1RMIX_INPUT_3_SOURCE 0x94C +#define ARIZONA_DSP1RMIX_INPUT_3_VOLUME 0x94D +#define ARIZONA_DSP1RMIX_INPUT_4_SOURCE 0x94E +#define ARIZONA_DSP1RMIX_INPUT_4_VOLUME 0x94F +#define ARIZONA_DSP1AUX1MIX_INPUT_1_SOURCE 0x950 +#define ARIZONA_DSP1AUX2MIX_INPUT_1_SOURCE 0x958 +#define ARIZONA_DSP1AUX3MIX_INPUT_1_SOURCE 0x960 +#define ARIZONA_DSP1AUX4MIX_INPUT_1_SOURCE 0x968 +#define ARIZONA_DSP1AUX5MIX_INPUT_1_SOURCE 0x970 +#define ARIZONA_DSP1AUX6MIX_INPUT_1_SOURCE 0x978 +#define ARIZONA_ASRC1LMIX_INPUT_1_SOURCE 0xA80 +#define ARIZONA_ASRC1RMIX_INPUT_1_SOURCE 0xA88 +#define ARIZONA_ASRC2LMIX_INPUT_1_SOURCE 0xA90 +#define ARIZONA_ASRC2RMIX_INPUT_1_SOURCE 0xA98 +#define ARIZONA_ISRC1DEC1MIX_INPUT_1_SOURCE 0xB00 +#define ARIZONA_ISRC1DEC2MIX_INPUT_1_SOURCE 0xB08 +#define ARIZONA_ISRC1INT1MIX_INPUT_1_SOURCE 0xB20 +#define ARIZONA_ISRC1INT2MIX_INPUT_1_SOURCE 0xB28 +#define ARIZONA_ISRC2DEC1MIX_INPUT_1_SOURCE 0xB40 +#define ARIZONA_ISRC2DEC2MIX_INPUT_1_SOURCE 0xB48 +#define ARIZONA_ISRC2INT1MIX_INPUT_1_SOURCE 0xB60 +#define ARIZONA_ISRC2INT2MIX_INPUT_1_SOURCE 0xB68 +#define ARIZONA_GPIO1_CTRL 0xC00 +#define ARIZONA_GPIO2_CTRL 0xC01 +#define ARIZONA_GPIO3_CTRL 0xC02 +#define ARIZONA_GPIO4_CTRL 0xC03 +#define ARIZONA_GPIO5_CTRL 0xC04 +#define ARIZONA_IRQ_CTRL_1 0xC0F +#define ARIZONA_GPIO_DEBOUNCE_CONFIG 0xC10 +#define ARIZONA_MISC_PAD_CTRL_1 0xC20 +#define ARIZONA_MISC_PAD_CTRL_2 0xC21 +#define ARIZONA_MISC_PAD_CTRL_3 0xC22 +#define ARIZONA_MISC_PAD_CTRL_4 0xC23 +#define ARIZONA_MISC_PAD_CTRL_5 0xC24 +#define ARIZONA_MISC_PAD_CTRL_6 0xC25 +#define ARIZONA_INTERRUPT_STATUS_1 0xD00 +#define ARIZONA_INTERRUPT_STATUS_2 0xD01 +#define ARIZONA_INTERRUPT_STATUS_3 0xD02 +#define ARIZONA_INTERRUPT_STATUS_4 0xD03 +#define ARIZONA_INTERRUPT_STATUS_5 0xD04 +#define ARIZONA_INTERRUPT_STATUS_1_MASK 0xD08 +#define ARIZONA_INTERRUPT_STATUS_2_MASK 0xD09 +#define ARIZONA_INTERRUPT_STATUS_3_MASK 0xD0A +#define ARIZONA_INTERRUPT_STATUS_4_MASK 0xD0B +#define ARIZONA_INTERRUPT_STATUS_5_MASK 0xD0C +#define ARIZONA_INTERRUPT_CONTROL 0xD0F +#define ARIZONA_IRQ2_STATUS_1 0xD10 +#define ARIZONA_IRQ2_STATUS_2 0xD11 +#define ARIZONA_IRQ2_STATUS_3 0xD12 +#define ARIZONA_IRQ2_STATUS_4 0xD13 +#define ARIZONA_IRQ2_STATUS_5 0xD14 +#define ARIZONA_IRQ2_STATUS_1_MASK 0xD18 +#define ARIZONA_IRQ2_STATUS_2_MASK 0xD19 +#define ARIZONA_IRQ2_STATUS_3_MASK 0xD1A +#define ARIZONA_IRQ2_STATUS_4_MASK 0xD1B +#define ARIZONA_IRQ2_STATUS_5_MASK 0xD1C +#define ARIZONA_IRQ2_CONTROL 0xD1F +#define ARIZONA_INTERRUPT_RAW_STATUS_2 0xD20 +#define ARIZONA_INTERRUPT_RAW_STATUS_3 0xD21 +#define ARIZONA_INTERRUPT_RAW_STATUS_4 0xD22 +#define ARIZONA_INTERRUPT_RAW_STATUS_5 0xD23 +#define ARIZONA_INTERRUPT_RAW_STATUS_6 0xD24 +#define ARIZONA_INTERRUPT_RAW_STATUS_7 0xD25 +#define ARIZONA_INTERRUPT_RAW_STATUS_8 0xD26 +#define ARIZONA_IRQ_PIN_STATUS 0xD40 +#define ARIZONA_ADSP2_IRQ0 0xD41 +#define ARIZONA_AOD_WKUP_AND_TRIG 0xD50 +#define ARIZONA_AOD_IRQ1 0xD51 +#define ARIZONA_AOD_IRQ2 0xD52 +#define ARIZONA_AOD_IRQ_MASK_IRQ1 0xD53 +#define ARIZONA_AOD_IRQ_MASK_IRQ2 0xD54 +#define ARIZONA_AOD_IRQ_RAW_STATUS 0xD55 +#define ARIZONA_JACK_DETECT_DEBOUNCE 0xD56 +#define ARIZONA_FX_CTRL1 0xE00 +#define ARIZONA_FX_CTRL2 0xE01 +#define ARIZONA_EQ1_1 0xE10 +#define ARIZONA_EQ1_2 0xE11 +#define ARIZONA_EQ1_3 0xE12 +#define ARIZONA_EQ1_4 0xE13 +#define ARIZONA_EQ1_5 0xE14 +#define ARIZONA_EQ1_6 0xE15 +#define ARIZONA_EQ1_7 0xE16 +#define ARIZONA_EQ1_8 0xE17 +#define ARIZONA_EQ1_9 0xE18 +#define ARIZONA_EQ1_10 0xE19 +#define ARIZONA_EQ1_11 0xE1A +#define ARIZONA_EQ1_12 0xE1B +#define ARIZONA_EQ1_13 0xE1C +#define ARIZONA_EQ1_14 0xE1D +#define ARIZONA_EQ1_15 0xE1E +#define ARIZONA_EQ1_16 0xE1F +#define ARIZONA_EQ1_17 0xE20 +#define ARIZONA_EQ1_18 0xE21 +#define ARIZONA_EQ1_19 0xE22 +#define ARIZONA_EQ1_20 0xE23 +#define ARIZONA_EQ1_21 0xE24 +#define ARIZONA_EQ2_1 0xE26 +#define ARIZONA_EQ2_2 0xE27 +#define ARIZONA_EQ2_3 0xE28 +#define ARIZONA_EQ2_4 0xE29 +#define ARIZONA_EQ2_5 0xE2A +#define ARIZONA_EQ2_6 0xE2B +#define ARIZONA_EQ2_7 0xE2C +#define ARIZONA_EQ2_8 0xE2D +#define ARIZONA_EQ2_9 0xE2E +#define ARIZONA_EQ2_10 0xE2F +#define ARIZONA_EQ2_11 0xE30 +#define ARIZONA_EQ2_12 0xE31 +#define ARIZONA_EQ2_13 0xE32 +#define ARIZONA_EQ2_14 0xE33 +#define ARIZONA_EQ2_15 0xE34 +#define ARIZONA_EQ2_16 0xE35 +#define ARIZONA_EQ2_17 0xE36 +#define ARIZONA_EQ2_18 0xE37 +#define ARIZONA_EQ2_19 0xE38 +#define ARIZONA_EQ2_20 0xE39 +#define ARIZONA_EQ2_21 0xE3A +#define ARIZONA_EQ3_1 0xE3C +#define ARIZONA_EQ3_2 0xE3D +#define ARIZONA_EQ3_3 0xE3E +#define ARIZONA_EQ3_4 0xE3F +#define ARIZONA_EQ3_5 0xE40 +#define ARIZONA_EQ3_6 0xE41 +#define ARIZONA_EQ3_7 0xE42 +#define ARIZONA_EQ3_8 0xE43 +#define ARIZONA_EQ3_9 0xE44 +#define ARIZONA_EQ3_10 0xE45 +#define ARIZONA_EQ3_11 0xE46 +#define ARIZONA_EQ3_12 0xE47 +#define ARIZONA_EQ3_13 0xE48 +#define ARIZONA_EQ3_14 0xE49 +#define ARIZONA_EQ3_15 0xE4A +#define ARIZONA_EQ3_16 0xE4B +#define ARIZONA_EQ3_17 0xE4C +#define ARIZONA_EQ3_18 0xE4D +#define ARIZONA_EQ3_19 0xE4E +#define ARIZONA_EQ3_20 0xE4F +#define ARIZONA_EQ3_21 0xE50 +#define ARIZONA_EQ4_1 0xE52 +#define ARIZONA_EQ4_2 0xE53 +#define ARIZONA_EQ4_3 0xE54 +#define ARIZONA_EQ4_4 0xE55 +#define ARIZONA_EQ4_5 0xE56 +#define ARIZONA_EQ4_6 0xE57 +#define ARIZONA_EQ4_7 0xE58 +#define ARIZONA_EQ4_8 0xE59 +#define ARIZONA_EQ4_9 0xE5A +#define ARIZONA_EQ4_10 0xE5B +#define ARIZONA_EQ4_11 0xE5C +#define ARIZONA_EQ4_12 0xE5D +#define ARIZONA_EQ4_13 0xE5E +#define ARIZONA_EQ4_14 0xE5F +#define ARIZONA_EQ4_15 0xE60 +#define ARIZONA_EQ4_16 0xE61 +#define ARIZONA_EQ4_17 0xE62 +#define ARIZONA_EQ4_18 0xE63 +#define ARIZONA_EQ4_19 0xE64 +#define ARIZONA_EQ4_20 0xE65 +#define ARIZONA_EQ4_21 0xE66 +#define ARIZONA_DRC1_CTRL1 0xE80 +#define ARIZONA_DRC1_CTRL2 0xE81 +#define ARIZONA_DRC1_CTRL3 0xE82 +#define ARIZONA_DRC1_CTRL4 0xE83 +#define ARIZONA_DRC1_CTRL5 0xE84 +#define ARIZONA_DRC2_CTRL1 0xE89 +#define ARIZONA_DRC2_CTRL2 0xE8A +#define ARIZONA_DRC2_CTRL3 0xE8B +#define ARIZONA_DRC2_CTRL4 0xE8C +#define ARIZONA_DRC2_CTRL5 0xE8D +#define ARIZONA_HPLPF1_1 0xEC0 +#define ARIZONA_HPLPF1_2 0xEC1 +#define ARIZONA_HPLPF2_1 0xEC4 +#define ARIZONA_HPLPF2_2 0xEC5 +#define ARIZONA_HPLPF3_1 0xEC8 +#define ARIZONA_HPLPF3_2 0xEC9 +#define ARIZONA_HPLPF4_1 0xECC +#define ARIZONA_HPLPF4_2 0xECD +#define ARIZONA_ASRC_ENABLE 0xEE0 +#define ARIZONA_ASRC_RATE1 0xEE2 +#define ARIZONA_ASRC_RATE2 0xEE3 +#define ARIZONA_ISRC_1_CTRL_1 0xEF0 +#define ARIZONA_ISRC_1_CTRL_2 0xEF1 +#define ARIZONA_ISRC_1_CTRL_3 0xEF2 +#define ARIZONA_ISRC_2_CTRL_1 0xEF3 +#define ARIZONA_ISRC_2_CTRL_2 0xEF4 +#define ARIZONA_ISRC_2_CTRL_3 0xEF5 +#define ARIZONA_ISRC_3_CTRL_1 0xEF6 +#define ARIZONA_ISRC_3_CTRL_2 0xEF7 +#define ARIZONA_ISRC_3_CTRL_3 0xEF8 +#define ARIZONA_DSP1_CONTROL_1 0x1100 +#define ARIZONA_DSP1_CLOCKING_1 0x1101 +#define ARIZONA_DSP1_STATUS_1 0x1104 +#define ARIZONA_DSP1_STATUS_2 0x1105 + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - software reset + */ +#define ARIZONA_SW_RST_DEV_ID1_MASK 0xFFFF /* SW_RST_DEV_ID1 - [15:0] */ +#define ARIZONA_SW_RST_DEV_ID1_SHIFT 0 /* SW_RST_DEV_ID1 - [15:0] */ +#define ARIZONA_SW_RST_DEV_ID1_WIDTH 16 /* SW_RST_DEV_ID1 - [15:0] */ + +/* + * R1 (0x01) - Device Revision + */ +#define ARIZONA_DEVICE_REVISION_MASK 0x00FF /* DEVICE_REVISION - [7:0] */ +#define ARIZONA_DEVICE_REVISION_SHIFT 0 /* DEVICE_REVISION - [7:0] */ +#define ARIZONA_DEVICE_REVISION_WIDTH 8 /* DEVICE_REVISION - [7:0] */ + +/* + * R8 (0x08) - Ctrl IF SPI CFG 1 + */ +#define ARIZONA_SPI_CFG 0x0010 /* SPI_CFG */ +#define ARIZONA_SPI_CFG_MASK 0x0010 /* SPI_CFG */ +#define ARIZONA_SPI_CFG_SHIFT 4 /* SPI_CFG */ +#define ARIZONA_SPI_CFG_WIDTH 1 /* SPI_CFG */ +#define ARIZONA_SPI_4WIRE 0x0008 /* SPI_4WIRE */ +#define ARIZONA_SPI_4WIRE_MASK 0x0008 /* SPI_4WIRE */ +#define ARIZONA_SPI_4WIRE_SHIFT 3 /* SPI_4WIRE */ +#define ARIZONA_SPI_4WIRE_WIDTH 1 /* SPI_4WIRE */ +#define ARIZONA_SPI_AUTO_INC_MASK 0x0003 /* SPI_AUTO_INC - [1:0] */ +#define ARIZONA_SPI_AUTO_INC_SHIFT 0 /* SPI_AUTO_INC - [1:0] */ +#define ARIZONA_SPI_AUTO_INC_WIDTH 2 /* SPI_AUTO_INC - [1:0] */ + +/* + * R9 (0x09) - Ctrl IF I2C1 CFG 1 + */ +#define ARIZONA_I2C1_AUTO_INC_MASK 0x0003 /* I2C1_AUTO_INC - [1:0] */ +#define ARIZONA_I2C1_AUTO_INC_SHIFT 0 /* I2C1_AUTO_INC - [1:0] */ +#define ARIZONA_I2C1_AUTO_INC_WIDTH 2 /* I2C1_AUTO_INC - [1:0] */ + +/* + * R13 (0x0D) - Ctrl IF Status 1 + */ +#define ARIZONA_I2C1_BUSY 0x0020 /* I2C1_BUSY */ +#define ARIZONA_I2C1_BUSY_MASK 0x0020 /* I2C1_BUSY */ +#define ARIZONA_I2C1_BUSY_SHIFT 5 /* I2C1_BUSY */ +#define ARIZONA_I2C1_BUSY_WIDTH 1 /* I2C1_BUSY */ +#define ARIZONA_SPI_BUSY 0x0010 /* SPI_BUSY */ +#define ARIZONA_SPI_BUSY_MASK 0x0010 /* SPI_BUSY */ +#define ARIZONA_SPI_BUSY_SHIFT 4 /* SPI_BUSY */ +#define ARIZONA_SPI_BUSY_WIDTH 1 /* SPI_BUSY */ + +/* + * R22 (0x16) - Write Sequencer Ctrl 0 + */ +#define ARIZONA_WSEQ_ABORT 0x0800 /* WSEQ_ABORT */ +#define ARIZONA_WSEQ_ABORT_MASK 0x0800 /* WSEQ_ABORT */ +#define ARIZONA_WSEQ_ABORT_SHIFT 11 /* WSEQ_ABORT */ +#define ARIZONA_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */ +#define ARIZONA_WSEQ_START 0x0400 /* WSEQ_START */ +#define ARIZONA_WSEQ_START_MASK 0x0400 /* WSEQ_START */ +#define ARIZONA_WSEQ_START_SHIFT 10 /* WSEQ_START */ +#define ARIZONA_WSEQ_START_WIDTH 1 /* WSEQ_START */ +#define ARIZONA_WSEQ_ENA 0x0200 /* WSEQ_ENA */ +#define ARIZONA_WSEQ_ENA_MASK 0x0200 /* WSEQ_ENA */ +#define ARIZONA_WSEQ_ENA_SHIFT 9 /* WSEQ_ENA */ +#define ARIZONA_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */ +#define ARIZONA_WSEQ_START_INDEX_MASK 0x01FF /* WSEQ_START_INDEX - [8:0] */ +#define ARIZONA_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [8:0] */ +#define ARIZONA_WSEQ_START_INDEX_WIDTH 9 /* WSEQ_START_INDEX - [8:0] */ + +/* + * R23 (0x17) - Write Sequencer Ctrl 1 + */ +#define ARIZONA_WSEQ_BUSY 0x0200 /* WSEQ_BUSY */ +#define ARIZONA_WSEQ_BUSY_MASK 0x0200 /* WSEQ_BUSY */ +#define ARIZONA_WSEQ_BUSY_SHIFT 9 /* WSEQ_BUSY */ +#define ARIZONA_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */ +#define ARIZONA_WSEQ_CURRENT_INDEX_MASK 0x01FF /* WSEQ_CURRENT_INDEX - [8:0] */ +#define ARIZONA_WSEQ_CURRENT_INDEX_SHIFT 0 /* WSEQ_CURRENT_INDEX - [8:0] */ +#define ARIZONA_WSEQ_CURRENT_INDEX_WIDTH 9 /* WSEQ_CURRENT_INDEX - [8:0] */ + +/* + * R24 (0x18) - Write Sequencer Ctrl 2 + */ +#define ARIZONA_LOAD_DEFAULTS 0x0002 /* LOAD_DEFAULTS */ +#define ARIZONA_LOAD_DEFAULTS_MASK 0x0002 /* LOAD_DEFAULTS */ +#define ARIZONA_LOAD_DEFAULTS_SHIFT 1 /* LOAD_DEFAULTS */ +#define ARIZONA_LOAD_DEFAULTS_WIDTH 1 /* LOAD_DEFAULTS */ +#define ARIZONA_WSEQ_LOAD_MEM 0x0001 /* WSEQ_LOAD_MEM */ +#define ARIZONA_WSEQ_LOAD_MEM_MASK 0x0001 /* WSEQ_LOAD_MEM */ +#define ARIZONA_WSEQ_LOAD_MEM_SHIFT 0 /* WSEQ_LOAD_MEM */ +#define ARIZONA_WSEQ_LOAD_MEM_WIDTH 1 /* WSEQ_LOAD_MEM */ + +/* + * R26 (0x1A) - Write Sequencer PROM + */ +#define ARIZONA_WSEQ_OTP_WRITE 0x0001 /* WSEQ_OTP_WRITE */ +#define ARIZONA_WSEQ_OTP_WRITE_MASK 0x0001 /* WSEQ_OTP_WRITE */ +#define ARIZONA_WSEQ_OTP_WRITE_SHIFT 0 /* WSEQ_OTP_WRITE */ +#define ARIZONA_WSEQ_OTP_WRITE_WIDTH 1 /* WSEQ_OTP_WRITE */ + +/* + * R32 (0x20) - Tone Generator 1 + */ +#define ARIZONA_TONE_RATE_MASK 0x7800 /* TONE_RATE - [14:11] */ +#define ARIZONA_TONE_RATE_SHIFT 11 /* TONE_RATE - [14:11] */ +#define ARIZONA_TONE_RATE_WIDTH 4 /* TONE_RATE - [14:11] */ +#define ARIZONA_TONE_OFFSET_MASK 0x0300 /* TONE_OFFSET - [9:8] */ +#define ARIZONA_TONE_OFFSET_SHIFT 8 /* TONE_OFFSET - [9:8] */ +#define ARIZONA_TONE_OFFSET_WIDTH 2 /* TONE_OFFSET - [9:8] */ +#define ARIZONA_TONE2_OVD 0x0020 /* TONE2_OVD */ +#define ARIZONA_TONE2_OVD_MASK 0x0020 /* TONE2_OVD */ +#define ARIZONA_TONE2_OVD_SHIFT 5 /* TONE2_OVD */ +#define ARIZONA_TONE2_OVD_WIDTH 1 /* TONE2_OVD */ +#define ARIZONA_TONE1_OVD 0x0010 /* TONE1_OVD */ +#define ARIZONA_TONE1_OVD_MASK 0x0010 /* TONE1_OVD */ +#define ARIZONA_TONE1_OVD_SHIFT 4 /* TONE1_OVD */ +#define ARIZONA_TONE1_OVD_WIDTH 1 /* TONE1_OVD */ +#define ARIZONA_TONE2_ENA 0x0002 /* TONE2_ENA */ +#define ARIZONA_TONE2_ENA_MASK 0x0002 /* TONE2_ENA */ +#define ARIZONA_TONE2_ENA_SHIFT 1 /* TONE2_ENA */ +#define ARIZONA_TONE2_ENA_WIDTH 1 /* TONE2_ENA */ +#define ARIZONA_TONE1_ENA 0x0001 /* TONE1_ENA */ +#define ARIZONA_TONE1_ENA_MASK 0x0001 /* TONE1_ENA */ +#define ARIZONA_TONE1_ENA_SHIFT 0 /* TONE1_ENA */ +#define ARIZONA_TONE1_ENA_WIDTH 1 /* TONE1_ENA */ + +/* + * R33 (0x21) - Tone Generator 2 + */ +#define ARIZONA_TONE1_LVL_0_MASK 0xFFFF /* TONE1_LVL - [15:0] */ +#define ARIZONA_TONE1_LVL_0_SHIFT 0 /* TONE1_LVL - [15:0] */ +#define ARIZONA_TONE1_LVL_0_WIDTH 16 /* TONE1_LVL - [15:0] */ + +/* + * R34 (0x22) - Tone Generator 3 + */ +#define ARIZONA_TONE1_LVL_MASK 0x00FF /* TONE1_LVL - [7:0] */ +#define ARIZONA_TONE1_LVL_SHIFT 0 /* TONE1_LVL - [7:0] */ +#define ARIZONA_TONE1_LVL_WIDTH 8 /* TONE1_LVL - [7:0] */ + +/* + * R35 (0x23) - Tone Generator 4 + */ +#define ARIZONA_TONE2_LVL_0_MASK 0xFFFF /* TONE2_LVL - [15:0] */ +#define ARIZONA_TONE2_LVL_0_SHIFT 0 /* TONE2_LVL - [15:0] */ +#define ARIZONA_TONE2_LVL_0_WIDTH 16 /* TONE2_LVL - [15:0] */ + +/* + * R36 (0x24) - Tone Generator 5 + */ +#define ARIZONA_TONE2_LVL_MASK 0x00FF /* TONE2_LVL - [7:0] */ +#define ARIZONA_TONE2_LVL_SHIFT 0 /* TONE2_LVL - [7:0] */ +#define ARIZONA_TONE2_LVL_WIDTH 8 /* TONE2_LVL - [7:0] */ + +/* + * R48 (0x30) - PWM Drive 1 + */ +#define ARIZONA_PWM_RATE_MASK 0x7800 /* PWM_RATE - [14:11] */ +#define ARIZONA_PWM_RATE_SHIFT 11 /* PWM_RATE - [14:11] */ +#define ARIZONA_PWM_RATE_WIDTH 4 /* PWM_RATE - [14:11] */ +#define ARIZONA_PWM_CLK_SEL_MASK 0x0700 /* PWM_CLK_SEL - [10:8] */ +#define ARIZONA_PWM_CLK_SEL_SHIFT 8 /* PWM_CLK_SEL - [10:8] */ +#define ARIZONA_PWM_CLK_SEL_WIDTH 3 /* PWM_CLK_SEL - [10:8] */ +#define ARIZONA_PWM2_OVD 0x0020 /* PWM2_OVD */ +#define ARIZONA_PWM2_OVD_MASK 0x0020 /* PWM2_OVD */ +#define ARIZONA_PWM2_OVD_SHIFT 5 /* PWM2_OVD */ +#define ARIZONA_PWM2_OVD_WIDTH 1 /* PWM2_OVD */ +#define ARIZONA_PWM1_OVD 0x0010 /* PWM1_OVD */ +#define ARIZONA_PWM1_OVD_MASK 0x0010 /* PWM1_OVD */ +#define ARIZONA_PWM1_OVD_SHIFT 4 /* PWM1_OVD */ +#define ARIZONA_PWM1_OVD_WIDTH 1 /* PWM1_OVD */ +#define ARIZONA_PWM2_ENA 0x0002 /* PWM2_ENA */ +#define ARIZONA_PWM2_ENA_MASK 0x0002 /* PWM2_ENA */ +#define ARIZONA_PWM2_ENA_SHIFT 1 /* PWM2_ENA */ +#define ARIZONA_PWM2_ENA_WIDTH 1 /* PWM2_ENA */ +#define ARIZONA_PWM1_ENA 0x0001 /* PWM1_ENA */ +#define ARIZONA_PWM1_ENA_MASK 0x0001 /* PWM1_ENA */ +#define ARIZONA_PWM1_ENA_SHIFT 0 /* PWM1_ENA */ +#define ARIZONA_PWM1_ENA_WIDTH 1 /* PWM1_ENA */ + +/* + * R49 (0x31) - PWM Drive 2 + */ +#define ARIZONA_PWM1_LVL_MASK 0x03FF /* PWM1_LVL - [9:0] */ +#define ARIZONA_PWM1_LVL_SHIFT 0 /* PWM1_LVL - [9:0] */ +#define ARIZONA_PWM1_LVL_WIDTH 10 /* PWM1_LVL - [9:0] */ + +/* + * R50 (0x32) - PWM Drive 3 + */ +#define ARIZONA_PWM2_LVL_MASK 0x03FF /* PWM2_LVL - [9:0] */ +#define ARIZONA_PWM2_LVL_SHIFT 0 /* PWM2_LVL - [9:0] */ +#define ARIZONA_PWM2_LVL_WIDTH 10 /* PWM2_LVL - [9:0] */ + +/* + * R64 (0x40) - Wake control + */ +#define ARIZONA_WKUP_GP5_FALL 0x0020 /* WKUP_GP5_FALL */ +#define ARIZONA_WKUP_GP5_FALL_MASK 0x0020 /* WKUP_GP5_FALL */ +#define ARIZONA_WKUP_GP5_FALL_SHIFT 5 /* WKUP_GP5_FALL */ +#define ARIZONA_WKUP_GP5_FALL_WIDTH 1 /* WKUP_GP5_FALL */ +#define ARIZONA_WKUP_GP5_RISE 0x0010 /* WKUP_GP5_RISE */ +#define ARIZONA_WKUP_GP5_RISE_MASK 0x0010 /* WKUP_GP5_RISE */ +#define ARIZONA_WKUP_GP5_RISE_SHIFT 4 /* WKUP_GP5_RISE */ +#define ARIZONA_WKUP_GP5_RISE_WIDTH 1 /* WKUP_GP5_RISE */ +#define ARIZONA_WKUP_JD1_FALL 0x0008 /* WKUP_JD1_FALL */ +#define ARIZONA_WKUP_JD1_FALL_MASK 0x0008 /* WKUP_JD1_FALL */ +#define ARIZONA_WKUP_JD1_FALL_SHIFT 3 /* WKUP_JD1_FALL */ +#define ARIZONA_WKUP_JD1_FALL_WIDTH 1 /* WKUP_JD1_FALL */ +#define ARIZONA_WKUP_JD1_RISE 0x0004 /* WKUP_JD1_RISE */ +#define ARIZONA_WKUP_JD1_RISE_MASK 0x0004 /* WKUP_JD1_RISE */ +#define ARIZONA_WKUP_JD1_RISE_SHIFT 2 /* WKUP_JD1_RISE */ +#define ARIZONA_WKUP_JD1_RISE_WIDTH 1 /* WKUP_JD1_RISE */ +#define ARIZONA_WKUP_JD2_FALL 0x0002 /* WKUP_JD2_FALL */ +#define ARIZONA_WKUP_JD2_FALL_MASK 0x0002 /* WKUP_JD2_FALL */ +#define ARIZONA_WKUP_JD2_FALL_SHIFT 1 /* WKUP_JD2_FALL */ +#define ARIZONA_WKUP_JD2_FALL_WIDTH 1 /* WKUP_JD2_FALL */ +#define ARIZONA_WKUP_JD2_RISE 0x0001 /* WKUP_JD2_RISE */ +#define ARIZONA_WKUP_JD2_RISE_MASK 0x0001 /* WKUP_JD2_RISE */ +#define ARIZONA_WKUP_JD2_RISE_SHIFT 0 /* WKUP_JD2_RISE */ +#define ARIZONA_WKUP_JD2_RISE_WIDTH 1 /* WKUP_JD2_RISE */ + +/* + * R65 (0x41) - Sequence control + */ +#define ARIZONA_WSEQ_ENA_GP5_FALL 0x0020 /* WSEQ_ENA_GP5_FALL */ +#define ARIZONA_WSEQ_ENA_GP5_FALL_MASK 0x0020 /* WSEQ_ENA_GP5_FALL */ +#define ARIZONA_WSEQ_ENA_GP5_FALL_SHIFT 5 /* WSEQ_ENA_GP5_FALL */ +#define ARIZONA_WSEQ_ENA_GP5_FALL_WIDTH 1 /* WSEQ_ENA_GP5_FALL */ +#define ARIZONA_WSEQ_ENA_GP5_RISE 0x0010 /* WSEQ_ENA_GP5_RISE */ +#define ARIZONA_WSEQ_ENA_GP5_RISE_MASK 0x0010 /* WSEQ_ENA_GP5_RISE */ +#define ARIZONA_WSEQ_ENA_GP5_RISE_SHIFT 4 /* WSEQ_ENA_GP5_RISE */ +#define ARIZONA_WSEQ_ENA_GP5_RISE_WIDTH 1 /* WSEQ_ENA_GP5_RISE */ +#define ARIZONA_WSEQ_ENA_JD1_FALL 0x0008 /* WSEQ_ENA_JD1_FALL */ +#define ARIZONA_WSEQ_ENA_JD1_FALL_MASK 0x0008 /* WSEQ_ENA_JD1_FALL */ +#define ARIZONA_WSEQ_ENA_JD1_FALL_SHIFT 3 /* WSEQ_ENA_JD1_FALL */ +#define ARIZONA_WSEQ_ENA_JD1_FALL_WIDTH 1 /* WSEQ_ENA_JD1_FALL */ +#define ARIZONA_WSEQ_ENA_JD1_RISE 0x0004 /* WSEQ_ENA_JD1_RISE */ +#define ARIZONA_WSEQ_ENA_JD1_RISE_MASK 0x0004 /* WSEQ_ENA_JD1_RISE */ +#define ARIZONA_WSEQ_ENA_JD1_RISE_SHIFT 2 /* WSEQ_ENA_JD1_RISE */ +#define ARIZONA_WSEQ_ENA_JD1_RISE_WIDTH 1 /* WSEQ_ENA_JD1_RISE */ +#define ARIZONA_WSEQ_ENA_JD2_FALL 0x0002 /* WSEQ_ENA_JD2_FALL */ +#define ARIZONA_WSEQ_ENA_JD2_FALL_MASK 0x0002 /* WSEQ_ENA_JD2_FALL */ +#define ARIZONA_WSEQ_ENA_JD2_FALL_SHIFT 1 /* WSEQ_ENA_JD2_FALL */ +#define ARIZONA_WSEQ_ENA_JD2_FALL_WIDTH 1 /* WSEQ_ENA_JD2_FALL */ +#define ARIZONA_WSEQ_ENA_JD2_RISE 0x0001 /* WSEQ_ENA_JD2_RISE */ +#define ARIZONA_WSEQ_ENA_JD2_RISE_MASK 0x0001 /* WSEQ_ENA_JD2_RISE */ +#define ARIZONA_WSEQ_ENA_JD2_RISE_SHIFT 0 /* WSEQ_ENA_JD2_RISE */ +#define ARIZONA_WSEQ_ENA_JD2_RISE_WIDTH 1 /* WSEQ_ENA_JD2_RISE */ + +/* + * R97 (0x61) - Sample Rate Sequence Select 1 + */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR_MASK 0x01FF /* WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR_SHIFT 0 /* WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR_WIDTH 9 /* WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR - [8:0] */ + +/* + * R98 (0x62) - Sample Rate Sequence Select 2 + */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_B_SEQ_ADDR_MASK 0x01FF /* WSEQ_SAMPLE_RATE_DETECT_B_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_B_SEQ_ADDR_SHIFT 0 /* WSEQ_SAMPLE_RATE_DETECT_B_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_B_SEQ_ADDR_WIDTH 9 /* WSEQ_SAMPLE_RATE_DETECT_B_SEQ_ADDR - [8:0] */ + +/* + * R99 (0x63) - Sample Rate Sequence Select 3 + */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_C_SEQ_ADDR_MASK 0x01FF /* WSEQ_SAMPLE_RATE_DETECT_C_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_C_SEQ_ADDR_SHIFT 0 /* WSEQ_SAMPLE_RATE_DETECT_C_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_C_SEQ_ADDR_WIDTH 9 /* WSEQ_SAMPLE_RATE_DETECT_C_SEQ_ADDR - [8:0] */ + +/* + * R100 (0x64) - Sample Rate Sequence Select 4 + */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_D_SEQ_ADDR_MASK 0x01FF /* WSEQ_SAMPLE_RATE_DETECT_D_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_D_SEQ_ADDR_SHIFT 0 /* WSEQ_SAMPLE_RATE_DETECT_D_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_D_SEQ_ADDR_WIDTH 9 /* WSEQ_SAMPLE_RATE_DETECT_D_SEQ_ADDR - [8:0] */ + +/* + * R104 (0x68) - Always On Triggers Sequence Select 1 + */ +#define ARIZONA_WSEQ_GP5_RISE_SEQ_ADDR_MASK 0x01FF /* WSEQ_GP5_RISE_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_GP5_RISE_SEQ_ADDR_SHIFT 0 /* WSEQ_GP5_RISE_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_GP5_RISE_SEQ_ADDR_WIDTH 9 /* WSEQ_GP5_RISE_SEQ_ADDR - [8:0] */ + +/* + * R105 (0x69) - Always On Triggers Sequence Select 2 + */ +#define ARIZONA_WSEQ_GP5_FALL_SEQ_ADDR_MASK 0x01FF /* WSEQ_GP5_FALL_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_GP5_FALL_SEQ_ADDR_SHIFT 0 /* WSEQ_GP5_FALL_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_GP5_FALL_SEQ_ADDR_WIDTH 9 /* WSEQ_GP5_FALL_SEQ_ADDR - [8:0] */ + +/* + * R106 (0x6A) - Always On Triggers Sequence Select 3 + */ +#define ARIZONA_WSEQ_JD1_RISE_SEQ_ADDR_MASK 0x01FF /* WSEQ_JD1_RISE_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD1_RISE_SEQ_ADDR_SHIFT 0 /* WSEQ_JD1_RISE_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD1_RISE_SEQ_ADDR_WIDTH 9 /* WSEQ_JD1_RISE_SEQ_ADDR - [8:0] */ + +/* + * R107 (0x6B) - Always On Triggers Sequence Select 4 + */ +#define ARIZONA_WSEQ_JD1_FALL_SEQ_ADDR_MASK 0x01FF /* WSEQ_JD1_FALL_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD1_FALL_SEQ_ADDR_SHIFT 0 /* WSEQ_JD1_FALL_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD1_FALL_SEQ_ADDR_WIDTH 9 /* WSEQ_JD1_FALL_SEQ_ADDR - [8:0] */ + +/* + * R108 (0x6C) - Always On Triggers Sequence Select 5 + */ +#define ARIZONA_WSEQ_JD2_RISE_SEQ_ADDR_MASK 0x01FF /* WSEQ_JD2_RISE_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD2_RISE_SEQ_ADDR_SHIFT 0 /* WSEQ_JD2_RISE_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD2_RISE_SEQ_ADDR_WIDTH 9 /* WSEQ_JD2_RISE_SEQ_ADDR - [8:0] */ + +/* + * R109 (0x6D) - Always On Triggers Sequence Select 6 + */ +#define ARIZONA_WSEQ_JD2_FALL_SEQ_ADDR_MASK 0x01FF /* WSEQ_JD2_FALL_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD2_FALL_SEQ_ADDR_SHIFT 0 /* WSEQ_JD2_FALL_SEQ_ADDR - [8:0] */ +#define ARIZONA_WSEQ_JD2_FALL_SEQ_ADDR_WIDTH 9 /* WSEQ_JD2_FALL_SEQ_ADDR - [8:0] */ + +/* + * R112 (0x70) - Comfort Noise Generator + */ +#define ARIZONA_NOISE_GEN_RATE_MASK 0x7800 /* NOISE_GEN_RATE - [14:11] */ +#define ARIZONA_NOISE_GEN_RATE_SHIFT 11 /* NOISE_GEN_RATE - [14:11] */ +#define ARIZONA_NOISE_GEN_RATE_WIDTH 4 /* NOISE_GEN_RATE - [14:11] */ +#define ARIZONA_NOISE_GEN_ENA 0x0020 /* NOISE_GEN_ENA */ +#define ARIZONA_NOISE_GEN_ENA_MASK 0x0020 /* NOISE_GEN_ENA */ +#define ARIZONA_NOISE_GEN_ENA_SHIFT 5 /* NOISE_GEN_ENA */ +#define ARIZONA_NOISE_GEN_ENA_WIDTH 1 /* NOISE_GEN_ENA */ +#define ARIZONA_NOISE_GEN_GAIN_MASK 0x001F /* NOISE_GEN_GAIN - [4:0] */ +#define ARIZONA_NOISE_GEN_GAIN_SHIFT 0 /* NOISE_GEN_GAIN - [4:0] */ +#define ARIZONA_NOISE_GEN_GAIN_WIDTH 5 /* NOISE_GEN_GAIN - [4:0] */ + +/* + * R144 (0x90) - Haptics Control 1 + */ +#define ARIZONA_HAP_RATE_MASK 0x7800 /* HAP_RATE - [14:11] */ +#define ARIZONA_HAP_RATE_SHIFT 11 /* HAP_RATE - [14:11] */ +#define ARIZONA_HAP_RATE_WIDTH 4 /* HAP_RATE - [14:11] */ +#define ARIZONA_ONESHOT_TRIG 0x0010 /* ONESHOT_TRIG */ +#define ARIZONA_ONESHOT_TRIG_MASK 0x0010 /* ONESHOT_TRIG */ +#define ARIZONA_ONESHOT_TRIG_SHIFT 4 /* ONESHOT_TRIG */ +#define ARIZONA_ONESHOT_TRIG_WIDTH 1 /* ONESHOT_TRIG */ +#define ARIZONA_HAP_CTRL_MASK 0x000C /* HAP_CTRL - [3:2] */ +#define ARIZONA_HAP_CTRL_SHIFT 2 /* HAP_CTRL - [3:2] */ +#define ARIZONA_HAP_CTRL_WIDTH 2 /* HAP_CTRL - [3:2] */ +#define ARIZONA_HAP_ACT 0x0002 /* HAP_ACT */ +#define ARIZONA_HAP_ACT_MASK 0x0002 /* HAP_ACT */ +#define ARIZONA_HAP_ACT_SHIFT 1 /* HAP_ACT */ +#define ARIZONA_HAP_ACT_WIDTH 1 /* HAP_ACT */ + +/* + * R145 (0x91) - Haptics Control 2 + */ +#define ARIZONA_LRA_FREQ_MASK 0x7FFF /* LRA_FREQ - [14:0] */ +#define ARIZONA_LRA_FREQ_SHIFT 0 /* LRA_FREQ - [14:0] */ +#define ARIZONA_LRA_FREQ_WIDTH 15 /* LRA_FREQ - [14:0] */ + +/* + * R146 (0x92) - Haptics phase 1 intensity + */ +#define ARIZONA_PHASE1_INTENSITY_MASK 0x00FF /* PHASE1_INTENSITY - [7:0] */ +#define ARIZONA_PHASE1_INTENSITY_SHIFT 0 /* PHASE1_INTENSITY - [7:0] */ +#define ARIZONA_PHASE1_INTENSITY_WIDTH 8 /* PHASE1_INTENSITY - [7:0] */ + +/* + * R147 (0x93) - Haptics phase 1 duration + */ +#define ARIZONA_PHASE1_DURATION_MASK 0x01FF /* PHASE1_DURATION - [8:0] */ +#define ARIZONA_PHASE1_DURATION_SHIFT 0 /* PHASE1_DURATION - [8:0] */ +#define ARIZONA_PHASE1_DURATION_WIDTH 9 /* PHASE1_DURATION - [8:0] */ + +/* + * R148 (0x94) - Haptics phase 2 intensity + */ +#define ARIZONA_PHASE2_INTENSITY_MASK 0x00FF /* PHASE2_INTENSITY - [7:0] */ +#define ARIZONA_PHASE2_INTENSITY_SHIFT 0 /* PHASE2_INTENSITY - [7:0] */ +#define ARIZONA_PHASE2_INTENSITY_WIDTH 8 /* PHASE2_INTENSITY - [7:0] */ + +/* + * R149 (0x95) - Haptics phase 2 duration + */ +#define ARIZONA_PHASE2_DURATION_MASK 0x07FF /* PHASE2_DURATION - [10:0] */ +#define ARIZONA_PHASE2_DURATION_SHIFT 0 /* PHASE2_DURATION - [10:0] */ +#define ARIZONA_PHASE2_DURATION_WIDTH 11 /* PHASE2_DURATION - [10:0] */ + +/* + * R150 (0x96) - Haptics phase 3 intensity + */ +#define ARIZONA_PHASE3_INTENSITY_MASK 0x00FF /* PHASE3_INTENSITY - [7:0] */ +#define ARIZONA_PHASE3_INTENSITY_SHIFT 0 /* PHASE3_INTENSITY - [7:0] */ +#define ARIZONA_PHASE3_INTENSITY_WIDTH 8 /* PHASE3_INTENSITY - [7:0] */ + +/* + * R151 (0x97) - Haptics phase 3 duration + */ +#define ARIZONA_PHASE3_DURATION_MASK 0x01FF /* PHASE3_DURATION - [8:0] */ +#define ARIZONA_PHASE3_DURATION_SHIFT 0 /* PHASE3_DURATION - [8:0] */ +#define ARIZONA_PHASE3_DURATION_WIDTH 9 /* PHASE3_DURATION - [8:0] */ + +/* + * R152 (0x98) - Haptics Status + */ +#define ARIZONA_ONESHOT_STS 0x0001 /* ONESHOT_STS */ +#define ARIZONA_ONESHOT_STS_MASK 0x0001 /* ONESHOT_STS */ +#define ARIZONA_ONESHOT_STS_SHIFT 0 /* ONESHOT_STS */ +#define ARIZONA_ONESHOT_STS_WIDTH 1 /* ONESHOT_STS */ + +/* + * R256 (0x100) - Clock 32k 1 + */ +#define ARIZONA_CLK_32K_ENA 0x0040 /* CLK_32K_ENA */ +#define ARIZONA_CLK_32K_ENA_MASK 0x0040 /* CLK_32K_ENA */ +#define ARIZONA_CLK_32K_ENA_SHIFT 6 /* CLK_32K_ENA */ +#define ARIZONA_CLK_32K_ENA_WIDTH 1 /* CLK_32K_ENA */ +#define ARIZONA_CLK_32K_SRC_MASK 0x0003 /* CLK_32K_SRC - [1:0] */ +#define ARIZONA_CLK_32K_SRC_SHIFT 0 /* CLK_32K_SRC - [1:0] */ +#define ARIZONA_CLK_32K_SRC_WIDTH 2 /* CLK_32K_SRC - [1:0] */ + +/* + * R257 (0x101) - System Clock 1 + */ +#define ARIZONA_SYSCLK_FRAC 0x8000 /* SYSCLK_FRAC */ +#define ARIZONA_SYSCLK_FRAC_MASK 0x8000 /* SYSCLK_FRAC */ +#define ARIZONA_SYSCLK_FRAC_SHIFT 15 /* SYSCLK_FRAC */ +#define ARIZONA_SYSCLK_FRAC_WIDTH 1 /* SYSCLK_FRAC */ +#define ARIZONA_SYSCLK_FREQ_MASK 0x0700 /* SYSCLK_FREQ - [10:8] */ +#define ARIZONA_SYSCLK_FREQ_SHIFT 8 /* SYSCLK_FREQ - [10:8] */ +#define ARIZONA_SYSCLK_FREQ_WIDTH 3 /* SYSCLK_FREQ - [10:8] */ +#define ARIZONA_SYSCLK_ENA 0x0040 /* SYSCLK_ENA */ +#define ARIZONA_SYSCLK_ENA_MASK 0x0040 /* SYSCLK_ENA */ +#define ARIZONA_SYSCLK_ENA_SHIFT 6 /* SYSCLK_ENA */ +#define ARIZONA_SYSCLK_ENA_WIDTH 1 /* SYSCLK_ENA */ +#define ARIZONA_SYSCLK_SRC_MASK 0x000F /* SYSCLK_SRC - [3:0] */ +#define ARIZONA_SYSCLK_SRC_SHIFT 0 /* SYSCLK_SRC - [3:0] */ +#define ARIZONA_SYSCLK_SRC_WIDTH 4 /* SYSCLK_SRC - [3:0] */ + +/* + * R258 (0x102) - Sample rate 1 + */ +#define ARIZONA_SAMPLE_RATE_1_MASK 0x001F /* SAMPLE_RATE_1 - [4:0] */ +#define ARIZONA_SAMPLE_RATE_1_SHIFT 0 /* SAMPLE_RATE_1 - [4:0] */ +#define ARIZONA_SAMPLE_RATE_1_WIDTH 5 /* SAMPLE_RATE_1 - [4:0] */ + +/* + * R259 (0x103) - Sample rate 2 + */ +#define ARIZONA_SAMPLE_RATE_2_MASK 0x001F /* SAMPLE_RATE_2 - [4:0] */ +#define ARIZONA_SAMPLE_RATE_2_SHIFT 0 /* SAMPLE_RATE_2 - [4:0] */ +#define ARIZONA_SAMPLE_RATE_2_WIDTH 5 /* SAMPLE_RATE_2 - [4:0] */ + +/* + * R260 (0x104) - Sample rate 3 + */ +#define ARIZONA_SAMPLE_RATE_3_MASK 0x001F /* SAMPLE_RATE_3 - [4:0] */ +#define ARIZONA_SAMPLE_RATE_3_SHIFT 0 /* SAMPLE_RATE_3 - [4:0] */ +#define ARIZONA_SAMPLE_RATE_3_WIDTH 5 /* SAMPLE_RATE_3 - [4:0] */ + +/* + * R266 (0x10A) - Sample rate 1 status + */ +#define ARIZONA_SAMPLE_RATE_1_STS_MASK 0x001F /* SAMPLE_RATE_1_STS - [4:0] */ +#define ARIZONA_SAMPLE_RATE_1_STS_SHIFT 0 /* SAMPLE_RATE_1_STS - [4:0] */ +#define ARIZONA_SAMPLE_RATE_1_STS_WIDTH 5 /* SAMPLE_RATE_1_STS - [4:0] */ + +/* + * R267 (0x10B) - Sample rate 2 status + */ +#define ARIZONA_SAMPLE_RATE_2_STS_MASK 0x001F /* SAMPLE_RATE_2_STS - [4:0] */ +#define ARIZONA_SAMPLE_RATE_2_STS_SHIFT 0 /* SAMPLE_RATE_2_STS - [4:0] */ +#define ARIZONA_SAMPLE_RATE_2_STS_WIDTH 5 /* SAMPLE_RATE_2_STS - [4:0] */ + +/* + * R268 (0x10C) - Sample rate 3 status + */ +#define ARIZONA_SAMPLE_RATE_3_STS_MASK 0x001F /* SAMPLE_RATE_3_STS - [4:0] */ +#define ARIZONA_SAMPLE_RATE_3_STS_SHIFT 0 /* SAMPLE_RATE_3_STS - [4:0] */ +#define ARIZONA_SAMPLE_RATE_3_STS_WIDTH 5 /* SAMPLE_RATE_3_STS - [4:0] */ + +/* + * R274 (0x112) - Async clock 1 + */ +#define ARIZONA_ASYNC_CLK_FREQ_MASK 0x0700 /* ASYNC_CLK_FREQ - [10:8] */ +#define ARIZONA_ASYNC_CLK_FREQ_SHIFT 8 /* ASYNC_CLK_FREQ - [10:8] */ +#define ARIZONA_ASYNC_CLK_FREQ_WIDTH 3 /* ASYNC_CLK_FREQ - [10:8] */ +#define ARIZONA_ASYNC_CLK_ENA 0x0040 /* ASYNC_CLK_ENA */ +#define ARIZONA_ASYNC_CLK_ENA_MASK 0x0040 /* ASYNC_CLK_ENA */ +#define ARIZONA_ASYNC_CLK_ENA_SHIFT 6 /* ASYNC_CLK_ENA */ +#define ARIZONA_ASYNC_CLK_ENA_WIDTH 1 /* ASYNC_CLK_ENA */ +#define ARIZONA_ASYNC_CLK_SRC_MASK 0x000F /* ASYNC_CLK_SRC - [3:0] */ +#define ARIZONA_ASYNC_CLK_SRC_SHIFT 0 /* ASYNC_CLK_SRC - [3:0] */ +#define ARIZONA_ASYNC_CLK_SRC_WIDTH 4 /* ASYNC_CLK_SRC - [3:0] */ + +/* + * R275 (0x113) - Async sample rate 1 + */ +#define ARIZONA_ASYNC_SAMPLE_RATE_MASK 0x001F /* ASYNC_SAMPLE_RATE - [4:0] */ +#define ARIZONA_ASYNC_SAMPLE_RATE_SHIFT 0 /* ASYNC_SAMPLE_RATE - [4:0] */ +#define ARIZONA_ASYNC_SAMPLE_RATE_WIDTH 5 /* ASYNC_SAMPLE_RATE - [4:0] */ + +/* + * R283 (0x11B) - Async sample rate 1 status + */ +#define ARIZONA_ASYNC_SAMPLE_RATE_STS_MASK 0x001F /* ASYNC_SAMPLE_RATE_STS - [4:0] */ +#define ARIZONA_ASYNC_SAMPLE_RATE_STS_SHIFT 0 /* ASYNC_SAMPLE_RATE_STS - [4:0] */ +#define ARIZONA_ASYNC_SAMPLE_RATE_STS_WIDTH 5 /* ASYNC_SAMPLE_RATE_STS - [4:0] */ + +/* + * R329 (0x149) - Output system clock + */ +#define ARIZONA_OPCLK_ENA 0x8000 /* OPCLK_ENA */ +#define ARIZONA_OPCLK_ENA_MASK 0x8000 /* OPCLK_ENA */ +#define ARIZONA_OPCLK_ENA_SHIFT 15 /* OPCLK_ENA */ +#define ARIZONA_OPCLK_ENA_WIDTH 1 /* OPCLK_ENA */ +#define ARIZONA_OPCLK_DIV_MASK 0x00F8 /* OPCLK_DIV - [7:3] */ +#define ARIZONA_OPCLK_DIV_SHIFT 3 /* OPCLK_DIV - [7:3] */ +#define ARIZONA_OPCLK_DIV_WIDTH 5 /* OPCLK_DIV - [7:3] */ +#define ARIZONA_OPCLK_SEL_MASK 0x0007 /* OPCLK_SEL - [2:0] */ +#define ARIZONA_OPCLK_SEL_SHIFT 0 /* OPCLK_SEL - [2:0] */ +#define ARIZONA_OPCLK_SEL_WIDTH 3 /* OPCLK_SEL - [2:0] */ + +/* + * R330 (0x14A) - Output async clock + */ +#define ARIZONA_OPCLK_ASYNC_ENA 0x8000 /* OPCLK_ASYNC_ENA */ +#define ARIZONA_OPCLK_ASYNC_ENA_MASK 0x8000 /* OPCLK_ASYNC_ENA */ +#define ARIZONA_OPCLK_ASYNC_ENA_SHIFT 15 /* OPCLK_ASYNC_ENA */ +#define ARIZONA_OPCLK_ASYNC_ENA_WIDTH 1 /* OPCLK_ASYNC_ENA */ +#define ARIZONA_OPCLK_ASYNC_DIV_MASK 0x00F8 /* OPCLK_ASYNC_DIV - [7:3] */ +#define ARIZONA_OPCLK_ASYNC_DIV_SHIFT 3 /* OPCLK_ASYNC_DIV - [7:3] */ +#define ARIZONA_OPCLK_ASYNC_DIV_WIDTH 5 /* OPCLK_ASYNC_DIV - [7:3] */ +#define ARIZONA_OPCLK_ASYNC_SEL_MASK 0x0007 /* OPCLK_ASYNC_SEL - [2:0] */ +#define ARIZONA_OPCLK_ASYNC_SEL_SHIFT 0 /* OPCLK_ASYNC_SEL - [2:0] */ +#define ARIZONA_OPCLK_ASYNC_SEL_WIDTH 3 /* OPCLK_ASYNC_SEL - [2:0] */ + +/* + * R338 (0x152) - Rate Estimator 1 + */ +#define ARIZONA_TRIG_ON_STARTUP 0x0010 /* TRIG_ON_STARTUP */ +#define ARIZONA_TRIG_ON_STARTUP_MASK 0x0010 /* TRIG_ON_STARTUP */ +#define ARIZONA_TRIG_ON_STARTUP_SHIFT 4 /* TRIG_ON_STARTUP */ +#define ARIZONA_TRIG_ON_STARTUP_WIDTH 1 /* TRIG_ON_STARTUP */ +#define ARIZONA_LRCLK_SRC_MASK 0x000E /* LRCLK_SRC - [3:1] */ +#define ARIZONA_LRCLK_SRC_SHIFT 1 /* LRCLK_SRC - [3:1] */ +#define ARIZONA_LRCLK_SRC_WIDTH 3 /* LRCLK_SRC - [3:1] */ +#define ARIZONA_RATE_EST_ENA 0x0001 /* RATE_EST_ENA */ +#define ARIZONA_RATE_EST_ENA_MASK 0x0001 /* RATE_EST_ENA */ +#define ARIZONA_RATE_EST_ENA_SHIFT 0 /* RATE_EST_ENA */ +#define ARIZONA_RATE_EST_ENA_WIDTH 1 /* RATE_EST_ENA */ + +/* + * R339 (0x153) - Rate Estimator 2 + */ +#define ARIZONA_SAMPLE_RATE_DETECT_A_MASK 0x001F /* SAMPLE_RATE_DETECT_A - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_A_SHIFT 0 /* SAMPLE_RATE_DETECT_A - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_A_WIDTH 5 /* SAMPLE_RATE_DETECT_A - [4:0] */ + +/* + * R340 (0x154) - Rate Estimator 3 + */ +#define ARIZONA_SAMPLE_RATE_DETECT_B_MASK 0x001F /* SAMPLE_RATE_DETECT_B - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_B_SHIFT 0 /* SAMPLE_RATE_DETECT_B - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_B_WIDTH 5 /* SAMPLE_RATE_DETECT_B - [4:0] */ + +/* + * R341 (0x155) - Rate Estimator 4 + */ +#define ARIZONA_SAMPLE_RATE_DETECT_C_MASK 0x001F /* SAMPLE_RATE_DETECT_C - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_C_SHIFT 0 /* SAMPLE_RATE_DETECT_C - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_C_WIDTH 5 /* SAMPLE_RATE_DETECT_C - [4:0] */ + +/* + * R342 (0x156) - Rate Estimator 5 + */ +#define ARIZONA_SAMPLE_RATE_DETECT_D_MASK 0x001F /* SAMPLE_RATE_DETECT_D - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_D_SHIFT 0 /* SAMPLE_RATE_DETECT_D - [4:0] */ +#define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH 5 /* SAMPLE_RATE_DETECT_D - [4:0] */ + +/* + * R369 (0x171) - FLL1 Control 1 + */ +#define ARIZONA_FLL1_FREERUN 0x0002 /* FLL1_FREERUN */ +#define ARIZONA_FLL1_FREERUN_MASK 0x0002 /* FLL1_FREERUN */ +#define ARIZONA_FLL1_FREERUN_SHIFT 1 /* FLL1_FREERUN */ +#define ARIZONA_FLL1_FREERUN_WIDTH 1 /* FLL1_FREERUN */ +#define ARIZONA_FLL1_ENA 0x0001 /* FLL1_ENA */ +#define ARIZONA_FLL1_ENA_MASK 0x0001 /* FLL1_ENA */ +#define ARIZONA_FLL1_ENA_SHIFT 0 /* FLL1_ENA */ +#define ARIZONA_FLL1_ENA_WIDTH 1 /* FLL1_ENA */ + +/* + * R370 (0x172) - FLL1 Control 2 + */ +#define ARIZONA_FLL1_CTRL_UPD 0x8000 /* FLL1_CTRL_UPD */ +#define ARIZONA_FLL1_CTRL_UPD_MASK 0x8000 /* FLL1_CTRL_UPD */ +#define ARIZONA_FLL1_CTRL_UPD_SHIFT 15 /* FLL1_CTRL_UPD */ +#define ARIZONA_FLL1_CTRL_UPD_WIDTH 1 /* FLL1_CTRL_UPD */ +#define ARIZONA_FLL1_N_MASK 0x03FF /* FLL1_N - [9:0] */ +#define ARIZONA_FLL1_N_SHIFT 0 /* FLL1_N - [9:0] */ +#define ARIZONA_FLL1_N_WIDTH 10 /* FLL1_N - [9:0] */ + +/* + * R371 (0x173) - FLL1 Control 3 + */ +#define ARIZONA_FLL1_THETA_MASK 0xFFFF /* FLL1_THETA - [15:0] */ +#define ARIZONA_FLL1_THETA_SHIFT 0 /* FLL1_THETA - [15:0] */ +#define ARIZONA_FLL1_THETA_WIDTH 16 /* FLL1_THETA - [15:0] */ + +/* + * R372 (0x174) - FLL1 Control 4 + */ +#define ARIZONA_FLL1_LAMBDA_MASK 0xFFFF /* FLL1_LAMBDA - [15:0] */ +#define ARIZONA_FLL1_LAMBDA_SHIFT 0 /* FLL1_LAMBDA - [15:0] */ +#define ARIZONA_FLL1_LAMBDA_WIDTH 16 /* FLL1_LAMBDA - [15:0] */ + +/* + * R373 (0x175) - FLL1 Control 5 + */ +#define ARIZONA_FLL1_FRATIO_MASK 0x0700 /* FLL1_FRATIO - [10:8] */ +#define ARIZONA_FLL1_FRATIO_SHIFT 8 /* FLL1_FRATIO - [10:8] */ +#define ARIZONA_FLL1_FRATIO_WIDTH 3 /* FLL1_FRATIO - [10:8] */ +#define ARIZONA_FLL1_OUTDIV_MASK 0x000E /* FLL1_OUTDIV - [3:1] */ +#define ARIZONA_FLL1_OUTDIV_SHIFT 1 /* FLL1_OUTDIV - [3:1] */ +#define ARIZONA_FLL1_OUTDIV_WIDTH 3 /* FLL1_OUTDIV - [3:1] */ + +/* + * R374 (0x176) - FLL1 Control 6 + */ +#define ARIZONA_FLL1_CLK_REF_DIV_MASK 0x00C0 /* FLL1_CLK_REF_DIV - [7:6] */ +#define ARIZONA_FLL1_CLK_REF_DIV_SHIFT 6 /* FLL1_CLK_REF_DIV - [7:6] */ +#define ARIZONA_FLL1_CLK_REF_DIV_WIDTH 2 /* FLL1_CLK_REF_DIV - [7:6] */ +#define ARIZONA_FLL1_CLK_REF_SRC_MASK 0x000F /* FLL1_CLK_REF_SRC - [3:0] */ +#define ARIZONA_FLL1_CLK_REF_SRC_SHIFT 0 /* FLL1_CLK_REF_SRC - [3:0] */ +#define ARIZONA_FLL1_CLK_REF_SRC_WIDTH 4 /* FLL1_CLK_REF_SRC - [3:0] */ + +/* + * R375 (0x177) - FLL1 Loop Filter Test 1 + */ +#define ARIZONA_FLL1_FRC_INTEG_UPD 0x8000 /* FLL1_FRC_INTEG_UPD */ +#define ARIZONA_FLL1_FRC_INTEG_UPD_MASK 0x8000 /* FLL1_FRC_INTEG_UPD */ +#define ARIZONA_FLL1_FRC_INTEG_UPD_SHIFT 15 /* FLL1_FRC_INTEG_UPD */ +#define ARIZONA_FLL1_FRC_INTEG_UPD_WIDTH 1 /* FLL1_FRC_INTEG_UPD */ +#define ARIZONA_FLL1_FRC_INTEG_VAL_MASK 0x0FFF /* FLL1_FRC_INTEG_VAL - [11:0] */ +#define ARIZONA_FLL1_FRC_INTEG_VAL_SHIFT 0 /* FLL1_FRC_INTEG_VAL - [11:0] */ +#define ARIZONA_FLL1_FRC_INTEG_VAL_WIDTH 12 /* FLL1_FRC_INTEG_VAL - [11:0] */ + +/* + * R385 (0x181) - FLL1 Synchroniser 1 + */ +#define ARIZONA_FLL1_SYNC_ENA 0x0001 /* FLL1_SYNC_ENA */ +#define ARIZONA_FLL1_SYNC_ENA_MASK 0x0001 /* FLL1_SYNC_ENA */ +#define ARIZONA_FLL1_SYNC_ENA_SHIFT 0 /* FLL1_SYNC_ENA */ +#define ARIZONA_FLL1_SYNC_ENA_WIDTH 1 /* FLL1_SYNC_ENA */ + +/* + * R386 (0x182) - FLL1 Synchroniser 2 + */ +#define ARIZONA_FLL1_SYNC_N_MASK 0x03FF /* FLL1_SYNC_N - [9:0] */ +#define ARIZONA_FLL1_SYNC_N_SHIFT 0 /* FLL1_SYNC_N - [9:0] */ +#define ARIZONA_FLL1_SYNC_N_WIDTH 10 /* FLL1_SYNC_N - [9:0] */ + +/* + * R387 (0x183) - FLL1 Synchroniser 3 + */ +#define ARIZONA_FLL1_SYNC_THETA_MASK 0xFFFF /* FLL1_SYNC_THETA - [15:0] */ +#define ARIZONA_FLL1_SYNC_THETA_SHIFT 0 /* FLL1_SYNC_THETA - [15:0] */ +#define ARIZONA_FLL1_SYNC_THETA_WIDTH 16 /* FLL1_SYNC_THETA - [15:0] */ + +/* + * R388 (0x184) - FLL1 Synchroniser 4 + */ +#define ARIZONA_FLL1_SYNC_LAMBDA_MASK 0xFFFF /* FLL1_SYNC_LAMBDA - [15:0] */ +#define ARIZONA_FLL1_SYNC_LAMBDA_SHIFT 0 /* FLL1_SYNC_LAMBDA - [15:0] */ +#define ARIZONA_FLL1_SYNC_LAMBDA_WIDTH 16 /* FLL1_SYNC_LAMBDA - [15:0] */ + +/* + * R389 (0x185) - FLL1 Synchroniser 5 + */ +#define ARIZONA_FLL1_SYNC_FRATIO_MASK 0x0700 /* FLL1_SYNC_FRATIO - [10:8] */ +#define ARIZONA_FLL1_SYNC_FRATIO_SHIFT 8 /* FLL1_SYNC_FRATIO - [10:8] */ +#define ARIZONA_FLL1_SYNC_FRATIO_WIDTH 3 /* FLL1_SYNC_FRATIO - [10:8] */ + +/* + * R390 (0x186) - FLL1 Synchroniser 6 + */ +#define ARIZONA_FLL1_CLK_SYNC_DIV_MASK 0x00C0 /* FLL1_CLK_SYNC_DIV - [7:6] */ +#define ARIZONA_FLL1_CLK_SYNC_DIV_SHIFT 6 /* FLL1_CLK_SYNC_DIV - [7:6] */ +#define ARIZONA_FLL1_CLK_SYNC_DIV_WIDTH 2 /* FLL1_CLK_SYNC_DIV - [7:6] */ +#define ARIZONA_FLL1_CLK_SYNC_SRC_MASK 0x000F /* FLL1_CLK_SYNC_SRC - [3:0] */ +#define ARIZONA_FLL1_CLK_SYNC_SRC_SHIFT 0 /* FLL1_CLK_SYNC_SRC - [3:0] */ +#define ARIZONA_FLL1_CLK_SYNC_SRC_WIDTH 4 /* FLL1_CLK_SYNC_SRC - [3:0] */ + +/* + * R393 (0x189) - FLL1 Spread Spectrum + */ +#define ARIZONA_FLL1_SS_AMPL_MASK 0x0030 /* FLL1_SS_AMPL - [5:4] */ +#define ARIZONA_FLL1_SS_AMPL_SHIFT 4 /* FLL1_SS_AMPL - [5:4] */ +#define ARIZONA_FLL1_SS_AMPL_WIDTH 2 /* FLL1_SS_AMPL - [5:4] */ +#define ARIZONA_FLL1_SS_FREQ_MASK 0x000C /* FLL1_SS_FREQ - [3:2] */ +#define ARIZONA_FLL1_SS_FREQ_SHIFT 2 /* FLL1_SS_FREQ - [3:2] */ +#define ARIZONA_FLL1_SS_FREQ_WIDTH 2 /* FLL1_SS_FREQ - [3:2] */ +#define ARIZONA_FLL1_SS_SEL_MASK 0x0003 /* FLL1_SS_SEL - [1:0] */ +#define ARIZONA_FLL1_SS_SEL_SHIFT 0 /* FLL1_SS_SEL - [1:0] */ +#define ARIZONA_FLL1_SS_SEL_WIDTH 2 /* FLL1_SS_SEL - [1:0] */ + +/* + * R394 (0x18A) - FLL1 GPIO Clock + */ +#define ARIZONA_FLL1_GPDIV_MASK 0x00FE /* FLL1_GPDIV - [7:1] */ +#define ARIZONA_FLL1_GPDIV_SHIFT 1 /* FLL1_GPDIV - [7:1] */ +#define ARIZONA_FLL1_GPDIV_WIDTH 7 /* FLL1_GPDIV - [7:1] */ +#define ARIZONA_FLL1_GPDIV_ENA 0x0001 /* FLL1_GPDIV_ENA */ +#define ARIZONA_FLL1_GPDIV_ENA_MASK 0x0001 /* FLL1_GPDIV_ENA */ +#define ARIZONA_FLL1_GPDIV_ENA_SHIFT 0 /* FLL1_GPDIV_ENA */ +#define ARIZONA_FLL1_GPDIV_ENA_WIDTH 1 /* FLL1_GPDIV_ENA */ + +/* + * R401 (0x191) - FLL2 Control 1 + */ +#define ARIZONA_FLL2_FREERUN 0x0002 /* FLL2_FREERUN */ +#define ARIZONA_FLL2_FREERUN_MASK 0x0002 /* FLL2_FREERUN */ +#define ARIZONA_FLL2_FREERUN_SHIFT 1 /* FLL2_FREERUN */ +#define ARIZONA_FLL2_FREERUN_WIDTH 1 /* FLL2_FREERUN */ +#define ARIZONA_FLL2_ENA 0x0001 /* FLL2_ENA */ +#define ARIZONA_FLL2_ENA_MASK 0x0001 /* FLL2_ENA */ +#define ARIZONA_FLL2_ENA_SHIFT 0 /* FLL2_ENA */ +#define ARIZONA_FLL2_ENA_WIDTH 1 /* FLL2_ENA */ + +/* + * R402 (0x192) - FLL2 Control 2 + */ +#define ARIZONA_FLL2_CTRL_UPD 0x8000 /* FLL2_CTRL_UPD */ +#define ARIZONA_FLL2_CTRL_UPD_MASK 0x8000 /* FLL2_CTRL_UPD */ +#define ARIZONA_FLL2_CTRL_UPD_SHIFT 15 /* FLL2_CTRL_UPD */ +#define ARIZONA_FLL2_CTRL_UPD_WIDTH 1 /* FLL2_CTRL_UPD */ +#define ARIZONA_FLL2_N_MASK 0x03FF /* FLL2_N - [9:0] */ +#define ARIZONA_FLL2_N_SHIFT 0 /* FLL2_N - [9:0] */ +#define ARIZONA_FLL2_N_WIDTH 10 /* FLL2_N - [9:0] */ + +/* + * R403 (0x193) - FLL2 Control 3 + */ +#define ARIZONA_FLL2_THETA_MASK 0xFFFF /* FLL2_THETA - [15:0] */ +#define ARIZONA_FLL2_THETA_SHIFT 0 /* FLL2_THETA - [15:0] */ +#define ARIZONA_FLL2_THETA_WIDTH 16 /* FLL2_THETA - [15:0] */ + +/* + * R404 (0x194) - FLL2 Control 4 + */ +#define ARIZONA_FLL2_LAMBDA_MASK 0xFFFF /* FLL2_LAMBDA - [15:0] */ +#define ARIZONA_FLL2_LAMBDA_SHIFT 0 /* FLL2_LAMBDA - [15:0] */ +#define ARIZONA_FLL2_LAMBDA_WIDTH 16 /* FLL2_LAMBDA - [15:0] */ + +/* + * R405 (0x195) - FLL2 Control 5 + */ +#define ARIZONA_FLL2_FRATIO_MASK 0x0700 /* FLL2_FRATIO - [10:8] */ +#define ARIZONA_FLL2_FRATIO_SHIFT 8 /* FLL2_FRATIO - [10:8] */ +#define ARIZONA_FLL2_FRATIO_WIDTH 3 /* FLL2_FRATIO - [10:8] */ +#define ARIZONA_FLL2_OUTDIV_MASK 0x000E /* FLL2_OUTDIV - [3:1] */ +#define ARIZONA_FLL2_OUTDIV_SHIFT 1 /* FLL2_OUTDIV - [3:1] */ +#define ARIZONA_FLL2_OUTDIV_WIDTH 3 /* FLL2_OUTDIV - [3:1] */ + +/* + * R406 (0x196) - FLL2 Control 6 + */ +#define ARIZONA_FLL2_CLK_REF_DIV_MASK 0x00C0 /* FLL2_CLK_REF_DIV - [7:6] */ +#define ARIZONA_FLL2_CLK_REF_DIV_SHIFT 6 /* FLL2_CLK_REF_DIV - [7:6] */ +#define ARIZONA_FLL2_CLK_REF_DIV_WIDTH 2 /* FLL2_CLK_REF_DIV - [7:6] */ +#define ARIZONA_FLL2_CLK_REF_SRC_MASK 0x000F /* FLL2_CLK_REF_SRC - [3:0] */ +#define ARIZONA_FLL2_CLK_REF_SRC_SHIFT 0 /* FLL2_CLK_REF_SRC - [3:0] */ +#define ARIZONA_FLL2_CLK_REF_SRC_WIDTH 4 /* FLL2_CLK_REF_SRC - [3:0] */ + +/* + * R407 (0x197) - FLL2 Loop Filter Test 1 + */ +#define ARIZONA_FLL2_FRC_INTEG_UPD 0x8000 /* FLL2_FRC_INTEG_UPD */ +#define ARIZONA_FLL2_FRC_INTEG_UPD_MASK 0x8000 /* FLL2_FRC_INTEG_UPD */ +#define ARIZONA_FLL2_FRC_INTEG_UPD_SHIFT 15 /* FLL2_FRC_INTEG_UPD */ +#define ARIZONA_FLL2_FRC_INTEG_UPD_WIDTH 1 /* FLL2_FRC_INTEG_UPD */ +#define ARIZONA_FLL2_FRC_INTEG_VAL_MASK 0x0FFF /* FLL2_FRC_INTEG_VAL - [11:0] */ +#define ARIZONA_FLL2_FRC_INTEG_VAL_SHIFT 0 /* FLL2_FRC_INTEG_VAL - [11:0] */ +#define ARIZONA_FLL2_FRC_INTEG_VAL_WIDTH 12 /* FLL2_FRC_INTEG_VAL - [11:0] */ + +/* + * R417 (0x1A1) - FLL2 Synchroniser 1 + */ +#define ARIZONA_FLL2_SYNC_ENA 0x0001 /* FLL2_SYNC_ENA */ +#define ARIZONA_FLL2_SYNC_ENA_MASK 0x0001 /* FLL2_SYNC_ENA */ +#define ARIZONA_FLL2_SYNC_ENA_SHIFT 0 /* FLL2_SYNC_ENA */ +#define ARIZONA_FLL2_SYNC_ENA_WIDTH 1 /* FLL2_SYNC_ENA */ + +/* + * R418 (0x1A2) - FLL2 Synchroniser 2 + */ +#define ARIZONA_FLL2_SYNC_N_MASK 0x03FF /* FLL2_SYNC_N - [9:0] */ +#define ARIZONA_FLL2_SYNC_N_SHIFT 0 /* FLL2_SYNC_N - [9:0] */ +#define ARIZONA_FLL2_SYNC_N_WIDTH 10 /* FLL2_SYNC_N - [9:0] */ + +/* + * R419 (0x1A3) - FLL2 Synchroniser 3 + */ +#define ARIZONA_FLL2_SYNC_THETA_MASK 0xFFFF /* FLL2_SYNC_THETA - [15:0] */ +#define ARIZONA_FLL2_SYNC_THETA_SHIFT 0 /* FLL2_SYNC_THETA - [15:0] */ +#define ARIZONA_FLL2_SYNC_THETA_WIDTH 16 /* FLL2_SYNC_THETA - [15:0] */ + +/* + * R420 (0x1A4) - FLL2 Synchroniser 4 + */ +#define ARIZONA_FLL2_SYNC_LAMBDA_MASK 0xFFFF /* FLL2_SYNC_LAMBDA - [15:0] */ +#define ARIZONA_FLL2_SYNC_LAMBDA_SHIFT 0 /* FLL2_SYNC_LAMBDA - [15:0] */ +#define ARIZONA_FLL2_SYNC_LAMBDA_WIDTH 16 /* FLL2_SYNC_LAMBDA - [15:0] */ + +/* + * R421 (0x1A5) - FLL2 Synchroniser 5 + */ +#define ARIZONA_FLL2_SYNC_FRATIO_MASK 0x0700 /* FLL2_SYNC_FRATIO - [10:8] */ +#define ARIZONA_FLL2_SYNC_FRATIO_SHIFT 8 /* FLL2_SYNC_FRATIO - [10:8] */ +#define ARIZONA_FLL2_SYNC_FRATIO_WIDTH 3 /* FLL2_SYNC_FRATIO - [10:8] */ + +/* + * R422 (0x1A6) - FLL2 Synchroniser 6 + */ +#define ARIZONA_FLL2_CLK_SYNC_DIV_MASK 0x00C0 /* FLL2_CLK_SYNC_DIV - [7:6] */ +#define ARIZONA_FLL2_CLK_SYNC_DIV_SHIFT 6 /* FLL2_CLK_SYNC_DIV - [7:6] */ +#define ARIZONA_FLL2_CLK_SYNC_DIV_WIDTH 2 /* FLL2_CLK_SYNC_DIV - [7:6] */ +#define ARIZONA_FLL2_CLK_SYNC_SRC_MASK 0x000F /* FLL2_CLK_SYNC_SRC - [3:0] */ +#define ARIZONA_FLL2_CLK_SYNC_SRC_SHIFT 0 /* FLL2_CLK_SYNC_SRC - [3:0] */ +#define ARIZONA_FLL2_CLK_SYNC_SRC_WIDTH 4 /* FLL2_CLK_SYNC_SRC - [3:0] */ + +/* + * R425 (0x1A9) - FLL2 Spread Spectrum + */ +#define ARIZONA_FLL2_SS_AMPL_MASK 0x0030 /* FLL2_SS_AMPL - [5:4] */ +#define ARIZONA_FLL2_SS_AMPL_SHIFT 4 /* FLL2_SS_AMPL - [5:4] */ +#define ARIZONA_FLL2_SS_AMPL_WIDTH 2 /* FLL2_SS_AMPL - [5:4] */ +#define ARIZONA_FLL2_SS_FREQ_MASK 0x000C /* FLL2_SS_FREQ - [3:2] */ +#define ARIZONA_FLL2_SS_FREQ_SHIFT 2 /* FLL2_SS_FREQ - [3:2] */ +#define ARIZONA_FLL2_SS_FREQ_WIDTH 2 /* FLL2_SS_FREQ - [3:2] */ +#define ARIZONA_FLL2_SS_SEL_MASK 0x0003 /* FLL2_SS_SEL - [1:0] */ +#define ARIZONA_FLL2_SS_SEL_SHIFT 0 /* FLL2_SS_SEL - [1:0] */ +#define ARIZONA_FLL2_SS_SEL_WIDTH 2 /* FLL2_SS_SEL - [1:0] */ + +/* + * R426 (0x1AA) - FLL2 GPIO Clock + */ +#define ARIZONA_FLL2_GPDIV_MASK 0x00FE /* FLL2_GPDIV - [7:1] */ +#define ARIZONA_FLL2_GPDIV_SHIFT 1 /* FLL2_GPDIV - [7:1] */ +#define ARIZONA_FLL2_GPDIV_WIDTH 7 /* FLL2_GPDIV - [7:1] */ +#define ARIZONA_FLL2_GPDIV_ENA 0x0001 /* FLL2_GPDIV_ENA */ +#define ARIZONA_FLL2_GPDIV_ENA_MASK 0x0001 /* FLL2_GPDIV_ENA */ +#define ARIZONA_FLL2_GPDIV_ENA_SHIFT 0 /* FLL2_GPDIV_ENA */ +#define ARIZONA_FLL2_GPDIV_ENA_WIDTH 1 /* FLL2_GPDIV_ENA */ + +/* + * R512 (0x200) - Mic Charge Pump 1 + */ +#define ARIZONA_CPMIC_DISCH 0x0004 /* CPMIC_DISCH */ +#define ARIZONA_CPMIC_DISCH_MASK 0x0004 /* CPMIC_DISCH */ +#define ARIZONA_CPMIC_DISCH_SHIFT 2 /* CPMIC_DISCH */ +#define ARIZONA_CPMIC_DISCH_WIDTH 1 /* CPMIC_DISCH */ +#define ARIZONA_CPMIC_BYPASS 0x0002 /* CPMIC_BYPASS */ +#define ARIZONA_CPMIC_BYPASS_MASK 0x0002 /* CPMIC_BYPASS */ +#define ARIZONA_CPMIC_BYPASS_SHIFT 1 /* CPMIC_BYPASS */ +#define ARIZONA_CPMIC_BYPASS_WIDTH 1 /* CPMIC_BYPASS */ +#define ARIZONA_CPMIC_ENA 0x0001 /* CPMIC_ENA */ +#define ARIZONA_CPMIC_ENA_MASK 0x0001 /* CPMIC_ENA */ +#define ARIZONA_CPMIC_ENA_SHIFT 0 /* CPMIC_ENA */ +#define ARIZONA_CPMIC_ENA_WIDTH 1 /* CPMIC_ENA */ + +/* + * R528 (0x210) - LDO1 Control 1 + */ +#define ARIZONA_LDO1_VSEL_MASK 0x07E0 /* LDO1_VSEL - [10:5] */ +#define ARIZONA_LDO1_VSEL_SHIFT 5 /* LDO1_VSEL - [10:5] */ +#define ARIZONA_LDO1_VSEL_WIDTH 6 /* LDO1_VSEL - [10:5] */ +#define ARIZONA_LDO1_FAST 0x0010 /* LDO1_FAST */ +#define ARIZONA_LDO1_FAST_MASK 0x0010 /* LDO1_FAST */ +#define ARIZONA_LDO1_FAST_SHIFT 4 /* LDO1_FAST */ +#define ARIZONA_LDO1_FAST_WIDTH 1 /* LDO1_FAST */ +#define ARIZONA_LDO1_DISCH 0x0004 /* LDO1_DISCH */ +#define ARIZONA_LDO1_DISCH_MASK 0x0004 /* LDO1_DISCH */ +#define ARIZONA_LDO1_DISCH_SHIFT 2 /* LDO1_DISCH */ +#define ARIZONA_LDO1_DISCH_WIDTH 1 /* LDO1_DISCH */ +#define ARIZONA_LDO1_BYPASS 0x0002 /* LDO1_BYPASS */ +#define ARIZONA_LDO1_BYPASS_MASK 0x0002 /* LDO1_BYPASS */ +#define ARIZONA_LDO1_BYPASS_SHIFT 1 /* LDO1_BYPASS */ +#define ARIZONA_LDO1_BYPASS_WIDTH 1 /* LDO1_BYPASS */ +#define ARIZONA_LDO1_ENA 0x0001 /* LDO1_ENA */ +#define ARIZONA_LDO1_ENA_MASK 0x0001 /* LDO1_ENA */ +#define ARIZONA_LDO1_ENA_SHIFT 0 /* LDO1_ENA */ +#define ARIZONA_LDO1_ENA_WIDTH 1 /* LDO1_ENA */ + +/* + * R531 (0x213) - LDO2 Control 1 + */ +#define ARIZONA_LDO2_VSEL_MASK 0x07E0 /* LDO2_VSEL - [10:5] */ +#define ARIZONA_LDO2_VSEL_SHIFT 5 /* LDO2_VSEL - [10:5] */ +#define ARIZONA_LDO2_VSEL_WIDTH 6 /* LDO2_VSEL - [10:5] */ +#define ARIZONA_LDO2_FAST 0x0010 /* LDO2_FAST */ +#define ARIZONA_LDO2_FAST_MASK 0x0010 /* LDO2_FAST */ +#define ARIZONA_LDO2_FAST_SHIFT 4 /* LDO2_FAST */ +#define ARIZONA_LDO2_FAST_WIDTH 1 /* LDO2_FAST */ +#define ARIZONA_LDO2_DISCH 0x0004 /* LDO2_DISCH */ +#define ARIZONA_LDO2_DISCH_MASK 0x0004 /* LDO2_DISCH */ +#define ARIZONA_LDO2_DISCH_SHIFT 2 /* LDO2_DISCH */ +#define ARIZONA_LDO2_DISCH_WIDTH 1 /* LDO2_DISCH */ +#define ARIZONA_LDO2_BYPASS 0x0002 /* LDO2_BYPASS */ +#define ARIZONA_LDO2_BYPASS_MASK 0x0002 /* LDO2_BYPASS */ +#define ARIZONA_LDO2_BYPASS_SHIFT 1 /* LDO2_BYPASS */ +#define ARIZONA_LDO2_BYPASS_WIDTH 1 /* LDO2_BYPASS */ +#define ARIZONA_LDO2_ENA 0x0001 /* LDO2_ENA */ +#define ARIZONA_LDO2_ENA_MASK 0x0001 /* LDO2_ENA */ +#define ARIZONA_LDO2_ENA_SHIFT 0 /* LDO2_ENA */ +#define ARIZONA_LDO2_ENA_WIDTH 1 /* LDO2_ENA */ + +/* + * R536 (0x218) - Mic Bias Ctrl 1 + */ +#define ARIZONA_MICB1_EXT_CAP 0x8000 /* MICB1_EXT_CAP */ +#define ARIZONA_MICB1_EXT_CAP_MASK 0x8000 /* MICB1_EXT_CAP */ +#define ARIZONA_MICB1_EXT_CAP_SHIFT 15 /* MICB1_EXT_CAP */ +#define ARIZONA_MICB1_EXT_CAP_WIDTH 1 /* MICB1_EXT_CAP */ +#define ARIZONA_MICB1_LVL_MASK 0x01E0 /* MICB1_LVL - [8:5] */ +#define ARIZONA_MICB1_LVL_SHIFT 5 /* MICB1_LVL - [8:5] */ +#define ARIZONA_MICB1_LVL_WIDTH 4 /* MICB1_LVL - [8:5] */ +#define ARIZONA_MICB1_FAST 0x0010 /* MICB1_FAST */ +#define ARIZONA_MICB1_FAST_MASK 0x0010 /* MICB1_FAST */ +#define ARIZONA_MICB1_FAST_SHIFT 4 /* MICB1_FAST */ +#define ARIZONA_MICB1_FAST_WIDTH 1 /* MICB1_FAST */ +#define ARIZONA_MICB1_RATE 0x0008 /* MICB1_RATE */ +#define ARIZONA_MICB1_RATE_MASK 0x0008 /* MICB1_RATE */ +#define ARIZONA_MICB1_RATE_SHIFT 3 /* MICB1_RATE */ +#define ARIZONA_MICB1_RATE_WIDTH 1 /* MICB1_RATE */ +#define ARIZONA_MICB1_DISCH 0x0004 /* MICB1_DISCH */ +#define ARIZONA_MICB1_DISCH_MASK 0x0004 /* MICB1_DISCH */ +#define ARIZONA_MICB1_DISCH_SHIFT 2 /* MICB1_DISCH */ +#define ARIZONA_MICB1_DISCH_WIDTH 1 /* MICB1_DISCH */ +#define ARIZONA_MICB1_BYPASS 0x0002 /* MICB1_BYPASS */ +#define ARIZONA_MICB1_BYPASS_MASK 0x0002 /* MICB1_BYPASS */ +#define ARIZONA_MICB1_BYPASS_SHIFT 1 /* MICB1_BYPASS */ +#define ARIZONA_MICB1_BYPASS_WIDTH 1 /* MICB1_BYPASS */ +#define ARIZONA_MICB1_ENA 0x0001 /* MICB1_ENA */ +#define ARIZONA_MICB1_ENA_MASK 0x0001 /* MICB1_ENA */ +#define ARIZONA_MICB1_ENA_SHIFT 0 /* MICB1_ENA */ +#define ARIZONA_MICB1_ENA_WIDTH 1 /* MICB1_ENA */ + +/* + * R537 (0x219) - Mic Bias Ctrl 2 + */ +#define ARIZONA_MICB2_EXT_CAP 0x8000 /* MICB2_EXT_CAP */ +#define ARIZONA_MICB2_EXT_CAP_MASK 0x8000 /* MICB2_EXT_CAP */ +#define ARIZONA_MICB2_EXT_CAP_SHIFT 15 /* MICB2_EXT_CAP */ +#define ARIZONA_MICB2_EXT_CAP_WIDTH 1 /* MICB2_EXT_CAP */ +#define ARIZONA_MICB2_LVL_MASK 0x01E0 /* MICB2_LVL - [8:5] */ +#define ARIZONA_MICB2_LVL_SHIFT 5 /* MICB2_LVL - [8:5] */ +#define ARIZONA_MICB2_LVL_WIDTH 4 /* MICB2_LVL - [8:5] */ +#define ARIZONA_MICB2_FAST 0x0010 /* MICB2_FAST */ +#define ARIZONA_MICB2_FAST_MASK 0x0010 /* MICB2_FAST */ +#define ARIZONA_MICB2_FAST_SHIFT 4 /* MICB2_FAST */ +#define ARIZONA_MICB2_FAST_WIDTH 1 /* MICB2_FAST */ +#define ARIZONA_MICB2_RATE 0x0008 /* MICB2_RATE */ +#define ARIZONA_MICB2_RATE_MASK 0x0008 /* MICB2_RATE */ +#define ARIZONA_MICB2_RATE_SHIFT 3 /* MICB2_RATE */ +#define ARIZONA_MICB2_RATE_WIDTH 1 /* MICB2_RATE */ +#define ARIZONA_MICB2_DISCH 0x0004 /* MICB2_DISCH */ +#define ARIZONA_MICB2_DISCH_MASK 0x0004 /* MICB2_DISCH */ +#define ARIZONA_MICB2_DISCH_SHIFT 2 /* MICB2_DISCH */ +#define ARIZONA_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ +#define ARIZONA_MICB2_BYPASS 0x0002 /* MICB2_BYPASS */ +#define ARIZONA_MICB2_BYPASS_MASK 0x0002 /* MICB2_BYPASS */ +#define ARIZONA_MICB2_BYPASS_SHIFT 1 /* MICB2_BYPASS */ +#define ARIZONA_MICB2_BYPASS_WIDTH 1 /* MICB2_BYPASS */ +#define ARIZONA_MICB2_ENA 0x0001 /* MICB2_ENA */ +#define ARIZONA_MICB2_ENA_MASK 0x0001 /* MICB2_ENA */ +#define ARIZONA_MICB2_ENA_SHIFT 0 /* MICB2_ENA */ +#define ARIZONA_MICB2_ENA_WIDTH 1 /* MICB2_ENA */ + +/* + * R538 (0x21A) - Mic Bias Ctrl 3 + */ +#define ARIZONA_MICB3_EXT_CAP 0x8000 /* MICB3_EXT_CAP */ +#define ARIZONA_MICB3_EXT_CAP_MASK 0x8000 /* MICB3_EXT_CAP */ +#define ARIZONA_MICB3_EXT_CAP_SHIFT 15 /* MICB3_EXT_CAP */ +#define ARIZONA_MICB3_EXT_CAP_WIDTH 1 /* MICB3_EXT_CAP */ +#define ARIZONA_MICB3_LVL_MASK 0x01E0 /* MICB3_LVL - [8:5] */ +#define ARIZONA_MICB3_LVL_SHIFT 5 /* MICB3_LVL - [8:5] */ +#define ARIZONA_MICB3_LVL_WIDTH 4 /* MICB3_LVL - [8:5] */ +#define ARIZONA_MICB3_FAST 0x0010 /* MICB3_FAST */ +#define ARIZONA_MICB3_FAST_MASK 0x0010 /* MICB3_FAST */ +#define ARIZONA_MICB3_FAST_SHIFT 4 /* MICB3_FAST */ +#define ARIZONA_MICB3_FAST_WIDTH 1 /* MICB3_FAST */ +#define ARIZONA_MICB3_RATE 0x0008 /* MICB3_RATE */ +#define ARIZONA_MICB3_RATE_MASK 0x0008 /* MICB3_RATE */ +#define ARIZONA_MICB3_RATE_SHIFT 3 /* MICB3_RATE */ +#define ARIZONA_MICB3_RATE_WIDTH 1 /* MICB3_RATE */ +#define ARIZONA_MICB3_DISCH 0x0004 /* MICB3_DISCH */ +#define ARIZONA_MICB3_DISCH_MASK 0x0004 /* MICB3_DISCH */ +#define ARIZONA_MICB3_DISCH_SHIFT 2 /* MICB3_DISCH */ +#define ARIZONA_MICB3_DISCH_WIDTH 1 /* MICB3_DISCH */ +#define ARIZONA_MICB3_BYPASS 0x0002 /* MICB3_BYPASS */ +#define ARIZONA_MICB3_BYPASS_MASK 0x0002 /* MICB3_BYPASS */ +#define ARIZONA_MICB3_BYPASS_SHIFT 1 /* MICB3_BYPASS */ +#define ARIZONA_MICB3_BYPASS_WIDTH 1 /* MICB3_BYPASS */ +#define ARIZONA_MICB3_ENA 0x0001 /* MICB3_ENA */ +#define ARIZONA_MICB3_ENA_MASK 0x0001 /* MICB3_ENA */ +#define ARIZONA_MICB3_ENA_SHIFT 0 /* MICB3_ENA */ +#define ARIZONA_MICB3_ENA_WIDTH 1 /* MICB3_ENA */ + +/* + * R659 (0x293) - Accessory Detect Mode 1 + */ +#define ARIZONA_ACCDET_SRC 0x2000 /* ACCDET_SRC */ +#define ARIZONA_ACCDET_SRC_MASK 0x2000 /* ACCDET_SRC */ +#define ARIZONA_ACCDET_SRC_SHIFT 13 /* ACCDET_SRC */ +#define ARIZONA_ACCDET_SRC_WIDTH 1 /* ACCDET_SRC */ +#define ARIZONA_ACCDET_MODE_MASK 0x0003 /* ACCDET_MODE - [1:0] */ +#define ARIZONA_ACCDET_MODE_SHIFT 0 /* ACCDET_MODE - [1:0] */ +#define ARIZONA_ACCDET_MODE_WIDTH 2 /* ACCDET_MODE - [1:0] */ + +/* + * R667 (0x29B) - Headphone Detect 1 + */ +#define ARIZONA_HP_STEP_SIZE 0x0100 /* HP_STEP_SIZE */ +#define ARIZONA_HP_STEP_SIZE_MASK 0x0100 /* HP_STEP_SIZE */ +#define ARIZONA_HP_STEP_SIZE_SHIFT 8 /* HP_STEP_SIZE */ +#define ARIZONA_HP_STEP_SIZE_WIDTH 1 /* HP_STEP_SIZE */ +#define ARIZONA_HP_HOLDTIME_MASK 0x00E0 /* HP_HOLDTIME - [7:5] */ +#define ARIZONA_HP_HOLDTIME_SHIFT 5 /* HP_HOLDTIME - [7:5] */ +#define ARIZONA_HP_HOLDTIME_WIDTH 3 /* HP_HOLDTIME - [7:5] */ +#define ARIZONA_HP_CLK_DIV_MASK 0x0018 /* HP_CLK_DIV - [4:3] */ +#define ARIZONA_HP_CLK_DIV_SHIFT 3 /* HP_CLK_DIV - [4:3] */ +#define ARIZONA_HP_CLK_DIV_WIDTH 2 /* HP_CLK_DIV - [4:3] */ +#define ARIZONA_HP_IDAC_STEER 0x0004 /* HP_IDAC_STEER */ +#define ARIZONA_HP_IDAC_STEER_MASK 0x0004 /* HP_IDAC_STEER */ +#define ARIZONA_HP_IDAC_STEER_SHIFT 2 /* HP_IDAC_STEER */ +#define ARIZONA_HP_IDAC_STEER_WIDTH 1 /* HP_IDAC_STEER */ +#define ARIZONA_HP_RATE 0x0002 /* HP_RATE */ +#define ARIZONA_HP_RATE_MASK 0x0002 /* HP_RATE */ +#define ARIZONA_HP_RATE_SHIFT 1 /* HP_RATE */ +#define ARIZONA_HP_RATE_WIDTH 1 /* HP_RATE */ +#define ARIZONA_HP_POLL 0x0001 /* HP_POLL */ +#define ARIZONA_HP_POLL_MASK 0x0001 /* HP_POLL */ +#define ARIZONA_HP_POLL_SHIFT 0 /* HP_POLL */ +#define ARIZONA_HP_POLL_WIDTH 1 /* HP_POLL */ + +/* + * R668 (0x29C) - Headphone Detect 2 + */ +#define ARIZONA_HP_DONE 0x0080 /* HP_DONE */ +#define ARIZONA_HP_DONE_MASK 0x0080 /* HP_DONE */ +#define ARIZONA_HP_DONE_SHIFT 7 /* HP_DONE */ +#define ARIZONA_HP_DONE_WIDTH 1 /* HP_DONE */ +#define ARIZONA_HP_LVL_MASK 0x007F /* HP_LVL - [6:0] */ +#define ARIZONA_HP_LVL_SHIFT 0 /* HP_LVL - [6:0] */ +#define ARIZONA_HP_LVL_WIDTH 7 /* HP_LVL - [6:0] */ + +/* + * R675 (0x2A3) - Mic Detect 1 + */ +#define ARIZONA_MICD_BIAS_STARTTIME_MASK 0xF000 /* MICD_BIAS_STARTTIME - [15:12] */ +#define ARIZONA_MICD_BIAS_STARTTIME_SHIFT 12 /* MICD_BIAS_STARTTIME - [15:12] */ +#define ARIZONA_MICD_BIAS_STARTTIME_WIDTH 4 /* MICD_BIAS_STARTTIME - [15:12] */ +#define ARIZONA_MICD_RATE_MASK 0x0F00 /* MICD_RATE - [11:8] */ +#define ARIZONA_MICD_RATE_SHIFT 8 /* MICD_RATE - [11:8] */ +#define ARIZONA_MICD_RATE_WIDTH 4 /* MICD_RATE - [11:8] */ +#define ARIZONA_MICD_BIAS_SRC_MASK 0x0030 /* MICD_BIAS_SRC - [5:4] */ +#define ARIZONA_MICD_BIAS_SRC_SHIFT 4 /* MICD_BIAS_SRC - [5:4] */ +#define ARIZONA_MICD_BIAS_SRC_WIDTH 2 /* MICD_BIAS_SRC - [5:4] */ +#define ARIZONA_MICD_DBTIME 0x0002 /* MICD_DBTIME */ +#define ARIZONA_MICD_DBTIME_MASK 0x0002 /* MICD_DBTIME */ +#define ARIZONA_MICD_DBTIME_SHIFT 1 /* MICD_DBTIME */ +#define ARIZONA_MICD_DBTIME_WIDTH 1 /* MICD_DBTIME */ +#define ARIZONA_MICD_ENA 0x0001 /* MICD_ENA */ +#define ARIZONA_MICD_ENA_MASK 0x0001 /* MICD_ENA */ +#define ARIZONA_MICD_ENA_SHIFT 0 /* MICD_ENA */ +#define ARIZONA_MICD_ENA_WIDTH 1 /* MICD_ENA */ + +/* + * R676 (0x2A4) - Mic Detect 2 + */ +#define ARIZONA_MICD_LVL_SEL_MASK 0x00FF /* MICD_LVL_SEL - [7:0] */ +#define ARIZONA_MICD_LVL_SEL_SHIFT 0 /* MICD_LVL_SEL - [7:0] */ +#define ARIZONA_MICD_LVL_SEL_WIDTH 8 /* MICD_LVL_SEL - [7:0] */ + +/* + * R677 (0x2A5) - Mic Detect 3 + */ +#define ARIZONA_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ +#define ARIZONA_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ +#define ARIZONA_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ +#define ARIZONA_MICD_VALID 0x0002 /* MICD_VALID */ +#define ARIZONA_MICD_VALID_MASK 0x0002 /* MICD_VALID */ +#define ARIZONA_MICD_VALID_SHIFT 1 /* MICD_VALID */ +#define ARIZONA_MICD_VALID_WIDTH 1 /* MICD_VALID */ +#define ARIZONA_MICD_STS 0x0001 /* MICD_STS */ +#define ARIZONA_MICD_STS_MASK 0x0001 /* MICD_STS */ +#define ARIZONA_MICD_STS_SHIFT 0 /* MICD_STS */ +#define ARIZONA_MICD_STS_WIDTH 1 /* MICD_STS */ + +/* + * R707 (0x2C3) - Mic noise mix control 1 + */ +#define ARIZONA_MICMUTE_RATE_MASK 0x7800 /* MICMUTE_RATE - [14:11] */ +#define ARIZONA_MICMUTE_RATE_SHIFT 11 /* MICMUTE_RATE - [14:11] */ +#define ARIZONA_MICMUTE_RATE_WIDTH 4 /* MICMUTE_RATE - [14:11] */ +#define ARIZONA_MICMUTE_MIX_ENA 0x0040 /* MICMUTE_MIX_ENA */ +#define ARIZONA_MICMUTE_MIX_ENA_MASK 0x0040 /* MICMUTE_MIX_ENA */ +#define ARIZONA_MICMUTE_MIX_ENA_SHIFT 6 /* MICMUTE_MIX_ENA */ +#define ARIZONA_MICMUTE_MIX_ENA_WIDTH 1 /* MICMUTE_MIX_ENA */ + +/* + * R715 (0x2CB) - Isolation control + */ +#define ARIZONA_ISOLATE_DCVDD1 0x0001 /* ISOLATE_DCVDD1 */ +#define ARIZONA_ISOLATE_DCVDD1_MASK 0x0001 /* ISOLATE_DCVDD1 */ +#define ARIZONA_ISOLATE_DCVDD1_SHIFT 0 /* ISOLATE_DCVDD1 */ +#define ARIZONA_ISOLATE_DCVDD1_WIDTH 1 /* ISOLATE_DCVDD1 */ + +/* + * R723 (0x2D3) - Jack detect analogue + */ +#define ARIZONA_JD2_ENA 0x0002 /* JD2_ENA */ +#define ARIZONA_JD2_ENA_MASK 0x0002 /* JD2_ENA */ +#define ARIZONA_JD2_ENA_SHIFT 1 /* JD2_ENA */ +#define ARIZONA_JD2_ENA_WIDTH 1 /* JD2_ENA */ +#define ARIZONA_JD1_ENA 0x0001 /* JD1_ENA */ +#define ARIZONA_JD1_ENA_MASK 0x0001 /* JD1_ENA */ +#define ARIZONA_JD1_ENA_SHIFT 0 /* JD1_ENA */ +#define ARIZONA_JD1_ENA_WIDTH 1 /* JD1_ENA */ + +/* + * R768 (0x300) - Input Enables + */ +#define ARIZONA_IN3L_ENA 0x0020 /* IN3L_ENA */ +#define ARIZONA_IN3L_ENA_MASK 0x0020 /* IN3L_ENA */ +#define ARIZONA_IN3L_ENA_SHIFT 5 /* IN3L_ENA */ +#define ARIZONA_IN3L_ENA_WIDTH 1 /* IN3L_ENA */ +#define ARIZONA_IN3R_ENA 0x0010 /* IN3R_ENA */ +#define ARIZONA_IN3R_ENA_MASK 0x0010 /* IN3R_ENA */ +#define ARIZONA_IN3R_ENA_SHIFT 4 /* IN3R_ENA */ +#define ARIZONA_IN3R_ENA_WIDTH 1 /* IN3R_ENA */ +#define ARIZONA_IN2L_ENA 0x0008 /* IN2L_ENA */ +#define ARIZONA_IN2L_ENA_MASK 0x0008 /* IN2L_ENA */ +#define ARIZONA_IN2L_ENA_SHIFT 3 /* IN2L_ENA */ +#define ARIZONA_IN2L_ENA_WIDTH 1 /* IN2L_ENA */ +#define ARIZONA_IN2R_ENA 0x0004 /* IN2R_ENA */ +#define ARIZONA_IN2R_ENA_MASK 0x0004 /* IN2R_ENA */ +#define ARIZONA_IN2R_ENA_SHIFT 2 /* IN2R_ENA */ +#define ARIZONA_IN2R_ENA_WIDTH 1 /* IN2R_ENA */ +#define ARIZONA_IN1L_ENA 0x0002 /* IN1L_ENA */ +#define ARIZONA_IN1L_ENA_MASK 0x0002 /* IN1L_ENA */ +#define ARIZONA_IN1L_ENA_SHIFT 1 /* IN1L_ENA */ +#define ARIZONA_IN1L_ENA_WIDTH 1 /* IN1L_ENA */ +#define ARIZONA_IN1R_ENA 0x0001 /* IN1R_ENA */ +#define ARIZONA_IN1R_ENA_MASK 0x0001 /* IN1R_ENA */ +#define ARIZONA_IN1R_ENA_SHIFT 0 /* IN1R_ENA */ +#define ARIZONA_IN1R_ENA_WIDTH 1 /* IN1R_ENA */ + +/* + * R776 (0x308) - Input Rate + */ +#define ARIZONA_IN_RATE_MASK 0x7800 /* IN_RATE - [14:11] */ +#define ARIZONA_IN_RATE_SHIFT 11 /* IN_RATE - [14:11] */ +#define ARIZONA_IN_RATE_WIDTH 4 /* IN_RATE - [14:11] */ + +/* + * R777 (0x309) - Input Volume Ramp + */ +#define ARIZONA_IN_VD_RAMP_MASK 0x0070 /* IN_VD_RAMP - [6:4] */ +#define ARIZONA_IN_VD_RAMP_SHIFT 4 /* IN_VD_RAMP - [6:4] */ +#define ARIZONA_IN_VD_RAMP_WIDTH 3 /* IN_VD_RAMP - [6:4] */ +#define ARIZONA_IN_VI_RAMP_MASK 0x0007 /* IN_VI_RAMP - [2:0] */ +#define ARIZONA_IN_VI_RAMP_SHIFT 0 /* IN_VI_RAMP - [2:0] */ +#define ARIZONA_IN_VI_RAMP_WIDTH 3 /* IN_VI_RAMP - [2:0] */ + +/* + * R784 (0x310) - IN1L Control + */ +#define ARIZONA_IN1_OSR_MASK 0x6000 /* IN1_OSR - [14:13] */ +#define ARIZONA_IN1_OSR_SHIFT 13 /* IN1_OSR - [14:13] */ +#define ARIZONA_IN1_OSR_WIDTH 2 /* IN1_OSR - [14:13] */ +#define ARIZONA_IN1_DMIC_SUP_MASK 0x1800 /* IN1_DMIC_SUP - [12:11] */ +#define ARIZONA_IN1_DMIC_SUP_SHIFT 11 /* IN1_DMIC_SUP - [12:11] */ +#define ARIZONA_IN1_DMIC_SUP_WIDTH 2 /* IN1_DMIC_SUP - [12:11] */ +#define ARIZONA_IN1_MODE_MASK 0x0600 /* IN1_MODE - [10:9] */ +#define ARIZONA_IN1_MODE_SHIFT 9 /* IN1_MODE - [10:9] */ +#define ARIZONA_IN1_MODE_WIDTH 2 /* IN1_MODE - [10:9] */ +#define ARIZONA_IN1L_PGA_VOL_MASK 0x00FE /* IN1L_PGA_VOL - [7:1] */ +#define ARIZONA_IN1L_PGA_VOL_SHIFT 1 /* IN1L_PGA_VOL - [7:1] */ +#define ARIZONA_IN1L_PGA_VOL_WIDTH 7 /* IN1L_PGA_VOL - [7:1] */ + +/* + * R785 (0x311) - ADC Digital Volume 1L + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN1L_MUTE 0x0100 /* IN1L_MUTE */ +#define ARIZONA_IN1L_MUTE_MASK 0x0100 /* IN1L_MUTE */ +#define ARIZONA_IN1L_MUTE_SHIFT 8 /* IN1L_MUTE */ +#define ARIZONA_IN1L_MUTE_WIDTH 1 /* IN1L_MUTE */ +#define ARIZONA_IN1L_DIG_VOL_MASK 0x00FF /* IN1L_DIG_VOL - [7:0] */ +#define ARIZONA_IN1L_DIG_VOL_SHIFT 0 /* IN1L_DIG_VOL - [7:0] */ +#define ARIZONA_IN1L_DIG_VOL_WIDTH 8 /* IN1L_DIG_VOL - [7:0] */ + +/* + * R786 (0x312) - DMIC1L Control + */ +#define ARIZONA_IN1_DMICL_DLY_MASK 0x003F /* IN1_DMICL_DLY - [5:0] */ +#define ARIZONA_IN1_DMICL_DLY_SHIFT 0 /* IN1_DMICL_DLY - [5:0] */ +#define ARIZONA_IN1_DMICL_DLY_WIDTH 6 /* IN1_DMICL_DLY - [5:0] */ + +/* + * R788 (0x314) - IN1R Control + */ +#define ARIZONA_IN1R_PGA_VOL_MASK 0x00FE /* IN1R_PGA_VOL - [7:1] */ +#define ARIZONA_IN1R_PGA_VOL_SHIFT 1 /* IN1R_PGA_VOL - [7:1] */ +#define ARIZONA_IN1R_PGA_VOL_WIDTH 7 /* IN1R_PGA_VOL - [7:1] */ + +/* + * R789 (0x315) - ADC Digital Volume 1R + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN1R_MUTE 0x0100 /* IN1R_MUTE */ +#define ARIZONA_IN1R_MUTE_MASK 0x0100 /* IN1R_MUTE */ +#define ARIZONA_IN1R_MUTE_SHIFT 8 /* IN1R_MUTE */ +#define ARIZONA_IN1R_MUTE_WIDTH 1 /* IN1R_MUTE */ +#define ARIZONA_IN1R_DIG_VOL_MASK 0x00FF /* IN1R_DIG_VOL - [7:0] */ +#define ARIZONA_IN1R_DIG_VOL_SHIFT 0 /* IN1R_DIG_VOL - [7:0] */ +#define ARIZONA_IN1R_DIG_VOL_WIDTH 8 /* IN1R_DIG_VOL - [7:0] */ + +/* + * R790 (0x316) - DMIC1R Control + */ +#define ARIZONA_IN1_DMICR_DLY_MASK 0x003F /* IN1_DMICR_DLY - [5:0] */ +#define ARIZONA_IN1_DMICR_DLY_SHIFT 0 /* IN1_DMICR_DLY - [5:0] */ +#define ARIZONA_IN1_DMICR_DLY_WIDTH 6 /* IN1_DMICR_DLY - [5:0] */ + +/* + * R792 (0x318) - IN2L Control + */ +#define ARIZONA_IN2_OSR_MASK 0x6000 /* IN2_OSR - [14:13] */ +#define ARIZONA_IN2_OSR_SHIFT 13 /* IN2_OSR - [14:13] */ +#define ARIZONA_IN2_OSR_WIDTH 2 /* IN2_OSR - [14:13] */ +#define ARIZONA_IN2_DMIC_SUP_MASK 0x1800 /* IN2_DMIC_SUP - [12:11] */ +#define ARIZONA_IN2_DMIC_SUP_SHIFT 11 /* IN2_DMIC_SUP - [12:11] */ +#define ARIZONA_IN2_DMIC_SUP_WIDTH 2 /* IN2_DMIC_SUP - [12:11] */ +#define ARIZONA_IN2_MODE_MASK 0x0600 /* IN2_MODE - [10:9] */ +#define ARIZONA_IN2_MODE_SHIFT 9 /* IN2_MODE - [10:9] */ +#define ARIZONA_IN2_MODE_WIDTH 2 /* IN2_MODE - [10:9] */ +#define ARIZONA_IN2L_PGA_VOL_MASK 0x00FE /* IN2L_PGA_VOL - [7:1] */ +#define ARIZONA_IN2L_PGA_VOL_SHIFT 1 /* IN2L_PGA_VOL - [7:1] */ +#define ARIZONA_IN2L_PGA_VOL_WIDTH 7 /* IN2L_PGA_VOL - [7:1] */ + +/* + * R793 (0x319) - ADC Digital Volume 2L + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN2L_MUTE 0x0100 /* IN2L_MUTE */ +#define ARIZONA_IN2L_MUTE_MASK 0x0100 /* IN2L_MUTE */ +#define ARIZONA_IN2L_MUTE_SHIFT 8 /* IN2L_MUTE */ +#define ARIZONA_IN2L_MUTE_WIDTH 1 /* IN2L_MUTE */ +#define ARIZONA_IN2L_DIG_VOL_MASK 0x00FF /* IN2L_DIG_VOL - [7:0] */ +#define ARIZONA_IN2L_DIG_VOL_SHIFT 0 /* IN2L_DIG_VOL - [7:0] */ +#define ARIZONA_IN2L_DIG_VOL_WIDTH 8 /* IN2L_DIG_VOL - [7:0] */ + +/* + * R794 (0x31A) - DMIC2L Control + */ +#define ARIZONA_IN2_DMICL_DLY_MASK 0x003F /* IN2_DMICL_DLY - [5:0] */ +#define ARIZONA_IN2_DMICL_DLY_SHIFT 0 /* IN2_DMICL_DLY - [5:0] */ +#define ARIZONA_IN2_DMICL_DLY_WIDTH 6 /* IN2_DMICL_DLY - [5:0] */ + +/* + * R796 (0x31C) - IN2R Control + */ +#define ARIZONA_IN2R_PGA_VOL_MASK 0x00FE /* IN2R_PGA_VOL - [7:1] */ +#define ARIZONA_IN2R_PGA_VOL_SHIFT 1 /* IN2R_PGA_VOL - [7:1] */ +#define ARIZONA_IN2R_PGA_VOL_WIDTH 7 /* IN2R_PGA_VOL - [7:1] */ + +/* + * R797 (0x31D) - ADC Digital Volume 2R + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN2R_MUTE 0x0100 /* IN2R_MUTE */ +#define ARIZONA_IN2R_MUTE_MASK 0x0100 /* IN2R_MUTE */ +#define ARIZONA_IN2R_MUTE_SHIFT 8 /* IN2R_MUTE */ +#define ARIZONA_IN2R_MUTE_WIDTH 1 /* IN2R_MUTE */ +#define ARIZONA_IN2R_DIG_VOL_MASK 0x00FF /* IN2R_DIG_VOL - [7:0] */ +#define ARIZONA_IN2R_DIG_VOL_SHIFT 0 /* IN2R_DIG_VOL - [7:0] */ +#define ARIZONA_IN2R_DIG_VOL_WIDTH 8 /* IN2R_DIG_VOL - [7:0] */ + +/* + * R798 (0x31E) - DMIC2R Control + */ +#define ARIZONA_IN2_DMICR_DLY_MASK 0x003F /* IN2_DMICR_DLY - [5:0] */ +#define ARIZONA_IN2_DMICR_DLY_SHIFT 0 /* IN2_DMICR_DLY - [5:0] */ +#define ARIZONA_IN2_DMICR_DLY_WIDTH 6 /* IN2_DMICR_DLY - [5:0] */ + +/* + * R800 (0x320) - IN3L Control + */ +#define ARIZONA_IN3_OSR_MASK 0x6000 /* IN3_OSR - [14:13] */ +#define ARIZONA_IN3_OSR_SHIFT 13 /* IN3_OSR - [14:13] */ +#define ARIZONA_IN3_OSR_WIDTH 2 /* IN3_OSR - [14:13] */ +#define ARIZONA_IN3_DMIC_SUP_MASK 0x1800 /* IN3_DMIC_SUP - [12:11] */ +#define ARIZONA_IN3_DMIC_SUP_SHIFT 11 /* IN3_DMIC_SUP - [12:11] */ +#define ARIZONA_IN3_DMIC_SUP_WIDTH 2 /* IN3_DMIC_SUP - [12:11] */ +#define ARIZONA_IN3_MODE_MASK 0x0600 /* IN3_MODE - [10:9] */ +#define ARIZONA_IN3_MODE_SHIFT 9 /* IN3_MODE - [10:9] */ +#define ARIZONA_IN3_MODE_WIDTH 2 /* IN3_MODE - [10:9] */ +#define ARIZONA_IN3L_PGA_VOL_MASK 0x00FE /* IN3L_PGA_VOL - [7:1] */ +#define ARIZONA_IN3L_PGA_VOL_SHIFT 1 /* IN3L_PGA_VOL - [7:1] */ +#define ARIZONA_IN3L_PGA_VOL_WIDTH 7 /* IN3L_PGA_VOL - [7:1] */ + +/* + * R801 (0x321) - ADC Digital Volume 3L + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN3L_MUTE 0x0100 /* IN3L_MUTE */ +#define ARIZONA_IN3L_MUTE_MASK 0x0100 /* IN3L_MUTE */ +#define ARIZONA_IN3L_MUTE_SHIFT 8 /* IN3L_MUTE */ +#define ARIZONA_IN3L_MUTE_WIDTH 1 /* IN3L_MUTE */ +#define ARIZONA_IN3L_DIG_VOL_MASK 0x00FF /* IN3L_DIG_VOL - [7:0] */ +#define ARIZONA_IN3L_DIG_VOL_SHIFT 0 /* IN3L_DIG_VOL - [7:0] */ +#define ARIZONA_IN3L_DIG_VOL_WIDTH 8 /* IN3L_DIG_VOL - [7:0] */ + +/* + * R802 (0x322) - DMIC3L Control + */ +#define ARIZONA_IN3_DMICL_DLY_MASK 0x003F /* IN3_DMICL_DLY - [5:0] */ +#define ARIZONA_IN3_DMICL_DLY_SHIFT 0 /* IN3_DMICL_DLY - [5:0] */ +#define ARIZONA_IN3_DMICL_DLY_WIDTH 6 /* IN3_DMICL_DLY - [5:0] */ + +/* + * R804 (0x324) - IN3R Control + */ +#define ARIZONA_IN3R_PGA_VOL_MASK 0x00FE /* IN3R_PGA_VOL - [7:1] */ +#define ARIZONA_IN3R_PGA_VOL_SHIFT 1 /* IN3R_PGA_VOL - [7:1] */ +#define ARIZONA_IN3R_PGA_VOL_WIDTH 7 /* IN3R_PGA_VOL - [7:1] */ + +/* + * R805 (0x325) - ADC Digital Volume 3R + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN3R_MUTE 0x0100 /* IN3R_MUTE */ +#define ARIZONA_IN3R_MUTE_MASK 0x0100 /* IN3R_MUTE */ +#define ARIZONA_IN3R_MUTE_SHIFT 8 /* IN3R_MUTE */ +#define ARIZONA_IN3R_MUTE_WIDTH 1 /* IN3R_MUTE */ +#define ARIZONA_IN3R_DIG_VOL_MASK 0x00FF /* IN3R_DIG_VOL - [7:0] */ +#define ARIZONA_IN3R_DIG_VOL_SHIFT 0 /* IN3R_DIG_VOL - [7:0] */ +#define ARIZONA_IN3R_DIG_VOL_WIDTH 8 /* IN3R_DIG_VOL - [7:0] */ + +/* + * R806 (0x326) - DMIC3R Control + */ +#define ARIZONA_IN3_DMICR_DLY_MASK 0x003F /* IN3_DMICR_DLY - [5:0] */ +#define ARIZONA_IN3_DMICR_DLY_SHIFT 0 /* IN3_DMICR_DLY - [5:0] */ +#define ARIZONA_IN3_DMICR_DLY_WIDTH 6 /* IN3_DMICR_DLY - [5:0] */ + +/* + * R1024 (0x400) - Output Enables 1 + */ +#define ARIZONA_OUT5L_ENA 0x0200 /* OUT5L_ENA */ +#define ARIZONA_OUT5L_ENA_MASK 0x0200 /* OUT5L_ENA */ +#define ARIZONA_OUT5L_ENA_SHIFT 9 /* OUT5L_ENA */ +#define ARIZONA_OUT5L_ENA_WIDTH 1 /* OUT5L_ENA */ +#define ARIZONA_OUT5R_ENA 0x0100 /* OUT5R_ENA */ +#define ARIZONA_OUT5R_ENA_MASK 0x0100 /* OUT5R_ENA */ +#define ARIZONA_OUT5R_ENA_SHIFT 8 /* OUT5R_ENA */ +#define ARIZONA_OUT5R_ENA_WIDTH 1 /* OUT5R_ENA */ +#define ARIZONA_OUT4L_ENA 0x0080 /* OUT4L_ENA */ +#define ARIZONA_OUT4L_ENA_MASK 0x0080 /* OUT4L_ENA */ +#define ARIZONA_OUT4L_ENA_SHIFT 7 /* OUT4L_ENA */ +#define ARIZONA_OUT4L_ENA_WIDTH 1 /* OUT4L_ENA */ +#define ARIZONA_OUT4R_ENA 0x0040 /* OUT4R_ENA */ +#define ARIZONA_OUT4R_ENA_MASK 0x0040 /* OUT4R_ENA */ +#define ARIZONA_OUT4R_ENA_SHIFT 6 /* OUT4R_ENA */ +#define ARIZONA_OUT4R_ENA_WIDTH 1 /* OUT4R_ENA */ +#define ARIZONA_OUT3L_ENA 0x0020 /* OUT3L_ENA */ +#define ARIZONA_OUT3L_ENA_MASK 0x0020 /* OUT3L_ENA */ +#define ARIZONA_OUT3L_ENA_SHIFT 5 /* OUT3L_ENA */ +#define ARIZONA_OUT3L_ENA_WIDTH 1 /* OUT3L_ENA */ +#define ARIZONA_OUT3R_ENA 0x0010 /* OUT3R_ENA */ +#define ARIZONA_OUT3R_ENA_MASK 0x0010 /* OUT3R_ENA */ +#define ARIZONA_OUT3R_ENA_SHIFT 4 /* OUT3R_ENA */ +#define ARIZONA_OUT3R_ENA_WIDTH 1 /* OUT3R_ENA */ +#define ARIZONA_OUT2L_ENA 0x0008 /* OUT2L_ENA */ +#define ARIZONA_OUT2L_ENA_MASK 0x0008 /* OUT2L_ENA */ +#define ARIZONA_OUT2L_ENA_SHIFT 3 /* OUT2L_ENA */ +#define ARIZONA_OUT2L_ENA_WIDTH 1 /* OUT2L_ENA */ +#define ARIZONA_OUT2R_ENA 0x0004 /* OUT2R_ENA */ +#define ARIZONA_OUT2R_ENA_MASK 0x0004 /* OUT2R_ENA */ +#define ARIZONA_OUT2R_ENA_SHIFT 2 /* OUT2R_ENA */ +#define ARIZONA_OUT2R_ENA_WIDTH 1 /* OUT2R_ENA */ +#define ARIZONA_OUT1L_ENA 0x0002 /* OUT1L_ENA */ +#define ARIZONA_OUT1L_ENA_MASK 0x0002 /* OUT1L_ENA */ +#define ARIZONA_OUT1L_ENA_SHIFT 1 /* OUT1L_ENA */ +#define ARIZONA_OUT1L_ENA_WIDTH 1 /* OUT1L_ENA */ +#define ARIZONA_OUT1R_ENA 0x0001 /* OUT1R_ENA */ +#define ARIZONA_OUT1R_ENA_MASK 0x0001 /* OUT1R_ENA */ +#define ARIZONA_OUT1R_ENA_SHIFT 0 /* OUT1R_ENA */ +#define ARIZONA_OUT1R_ENA_WIDTH 1 /* OUT1R_ENA */ + +/* + * R1025 (0x401) - Output Status 1 + */ +#define ARIZONA_OUT6L_ENA_STS 0x0800 /* OUT6L_ENA_STS */ +#define ARIZONA_OUT6L_ENA_STS_MASK 0x0800 /* OUT6L_ENA_STS */ +#define ARIZONA_OUT6L_ENA_STS_SHIFT 11 /* OUT6L_ENA_STS */ +#define ARIZONA_OUT6L_ENA_STS_WIDTH 1 /* OUT6L_ENA_STS */ +#define ARIZONA_OUT6R_ENA_STS 0x0400 /* OUT6R_ENA_STS */ +#define ARIZONA_OUT6R_ENA_STS_MASK 0x0400 /* OUT6R_ENA_STS */ +#define ARIZONA_OUT6R_ENA_STS_SHIFT 10 /* OUT6R_ENA_STS */ +#define ARIZONA_OUT6R_ENA_STS_WIDTH 1 /* OUT6R_ENA_STS */ +#define ARIZONA_OUT5L_ENA_STS 0x0200 /* OUT5L_ENA_STS */ +#define ARIZONA_OUT5L_ENA_STS_MASK 0x0200 /* OUT5L_ENA_STS */ +#define ARIZONA_OUT5L_ENA_STS_SHIFT 9 /* OUT5L_ENA_STS */ +#define ARIZONA_OUT5L_ENA_STS_WIDTH 1 /* OUT5L_ENA_STS */ +#define ARIZONA_OUT5R_ENA_STS 0x0100 /* OUT5R_ENA_STS */ +#define ARIZONA_OUT5R_ENA_STS_MASK 0x0100 /* OUT5R_ENA_STS */ +#define ARIZONA_OUT5R_ENA_STS_SHIFT 8 /* OUT5R_ENA_STS */ +#define ARIZONA_OUT5R_ENA_STS_WIDTH 1 /* OUT5R_ENA_STS */ +#define ARIZONA_OUT4L_ENA_STS 0x0080 /* OUT4L_ENA_STS */ +#define ARIZONA_OUT4L_ENA_STS_MASK 0x0080 /* OUT4L_ENA_STS */ +#define ARIZONA_OUT4L_ENA_STS_SHIFT 7 /* OUT4L_ENA_STS */ +#define ARIZONA_OUT4L_ENA_STS_WIDTH 1 /* OUT4L_ENA_STS */ +#define ARIZONA_OUT4R_ENA_STS 0x0040 /* OUT4R_ENA_STS */ +#define ARIZONA_OUT4R_ENA_STS_MASK 0x0040 /* OUT4R_ENA_STS */ +#define ARIZONA_OUT4R_ENA_STS_SHIFT 6 /* OUT4R_ENA_STS */ +#define ARIZONA_OUT4R_ENA_STS_WIDTH 1 /* OUT4R_ENA_STS */ + +/* + * R1032 (0x408) - Output Rate 1 + */ +#define ARIZONA_OUT_RATE_MASK 0x7800 /* OUT_RATE - [14:11] */ +#define ARIZONA_OUT_RATE_SHIFT 11 /* OUT_RATE - [14:11] */ +#define ARIZONA_OUT_RATE_WIDTH 4 /* OUT_RATE - [14:11] */ + +/* + * R1033 (0x409) - Output Volume Ramp + */ +#define ARIZONA_OUT_VD_RAMP_MASK 0x0070 /* OUT_VD_RAMP - [6:4] */ +#define ARIZONA_OUT_VD_RAMP_SHIFT 4 /* OUT_VD_RAMP - [6:4] */ +#define ARIZONA_OUT_VD_RAMP_WIDTH 3 /* OUT_VD_RAMP - [6:4] */ +#define ARIZONA_OUT_VI_RAMP_MASK 0x0007 /* OUT_VI_RAMP - [2:0] */ +#define ARIZONA_OUT_VI_RAMP_SHIFT 0 /* OUT_VI_RAMP - [2:0] */ +#define ARIZONA_OUT_VI_RAMP_WIDTH 3 /* OUT_VI_RAMP - [2:0] */ + +/* + * R1040 (0x410) - Output Path Config 1L + */ +#define ARIZONA_OUT1_LP_MODE 0x8000 /* OUT1_LP_MODE */ +#define ARIZONA_OUT1_LP_MODE_MASK 0x8000 /* OUT1_LP_MODE */ +#define ARIZONA_OUT1_LP_MODE_SHIFT 15 /* OUT1_LP_MODE */ +#define ARIZONA_OUT1_LP_MODE_WIDTH 1 /* OUT1_LP_MODE */ +#define ARIZONA_OUT1_OSR 0x2000 /* OUT1_OSR */ +#define ARIZONA_OUT1_OSR_MASK 0x2000 /* OUT1_OSR */ +#define ARIZONA_OUT1_OSR_SHIFT 13 /* OUT1_OSR */ +#define ARIZONA_OUT1_OSR_WIDTH 1 /* OUT1_OSR */ +#define ARIZONA_OUT1_MONO 0x1000 /* OUT1_MONO */ +#define ARIZONA_OUT1_MONO_MASK 0x1000 /* OUT1_MONO */ +#define ARIZONA_OUT1_MONO_SHIFT 12 /* OUT1_MONO */ +#define ARIZONA_OUT1_MONO_WIDTH 1 /* OUT1_MONO */ +#define ARIZONA_OUT1L_ANC_SRC_MASK 0x0C00 /* OUT1L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT1L_ANC_SRC_SHIFT 10 /* OUT1L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT1L_ANC_SRC_WIDTH 2 /* OUT1L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT1L_PGA_VOL_MASK 0x00FE /* OUT1L_PGA_VOL - [7:1] */ +#define ARIZONA_OUT1L_PGA_VOL_SHIFT 1 /* OUT1L_PGA_VOL - [7:1] */ +#define ARIZONA_OUT1L_PGA_VOL_WIDTH 7 /* OUT1L_PGA_VOL - [7:1] */ + +/* + * R1041 (0x411) - DAC Digital Volume 1L + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT1L_MUTE 0x0100 /* OUT1L_MUTE */ +#define ARIZONA_OUT1L_MUTE_MASK 0x0100 /* OUT1L_MUTE */ +#define ARIZONA_OUT1L_MUTE_SHIFT 8 /* OUT1L_MUTE */ +#define ARIZONA_OUT1L_MUTE_WIDTH 1 /* OUT1L_MUTE */ +#define ARIZONA_OUT1L_VOL_MASK 0x00FF /* OUT1L_VOL - [7:0] */ +#define ARIZONA_OUT1L_VOL_SHIFT 0 /* OUT1L_VOL - [7:0] */ +#define ARIZONA_OUT1L_VOL_WIDTH 8 /* OUT1L_VOL - [7:0] */ + +/* + * R1042 (0x412) - DAC Volume Limit 1L + */ +#define ARIZONA_OUT1L_VOL_LIM_MASK 0x00FF /* OUT1L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT1L_VOL_LIM_SHIFT 0 /* OUT1L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT1L_VOL_LIM_WIDTH 8 /* OUT1L_VOL_LIM - [7:0] */ + +/* + * R1043 (0x413) - Noise Gate Select 1L + */ +#define ARIZONA_OUT1L_NGATE_SRC_MASK 0x0FFF /* OUT1L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT1L_NGATE_SRC_SHIFT 0 /* OUT1L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT1L_NGATE_SRC_WIDTH 12 /* OUT1L_NGATE_SRC - [11:0] */ + +/* + * R1044 (0x414) - Output Path Config 1R + */ +#define ARIZONA_OUT1R_ANC_SRC_MASK 0x0C00 /* OUT1R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT1R_ANC_SRC_SHIFT 10 /* OUT1R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT1R_ANC_SRC_WIDTH 2 /* OUT1R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT1R_PGA_VOL_MASK 0x00FE /* OUT1R_PGA_VOL - [7:1] */ +#define ARIZONA_OUT1R_PGA_VOL_SHIFT 1 /* OUT1R_PGA_VOL - [7:1] */ +#define ARIZONA_OUT1R_PGA_VOL_WIDTH 7 /* OUT1R_PGA_VOL - [7:1] */ + +/* + * R1045 (0x415) - DAC Digital Volume 1R + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT1R_MUTE 0x0100 /* OUT1R_MUTE */ +#define ARIZONA_OUT1R_MUTE_MASK 0x0100 /* OUT1R_MUTE */ +#define ARIZONA_OUT1R_MUTE_SHIFT 8 /* OUT1R_MUTE */ +#define ARIZONA_OUT1R_MUTE_WIDTH 1 /* OUT1R_MUTE */ +#define ARIZONA_OUT1R_VOL_MASK 0x00FF /* OUT1R_VOL - [7:0] */ +#define ARIZONA_OUT1R_VOL_SHIFT 0 /* OUT1R_VOL - [7:0] */ +#define ARIZONA_OUT1R_VOL_WIDTH 8 /* OUT1R_VOL - [7:0] */ + +/* + * R1046 (0x416) - DAC Volume Limit 1R + */ +#define ARIZONA_OUT1R_VOL_LIM_MASK 0x00FF /* OUT1R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT1R_VOL_LIM_SHIFT 0 /* OUT1R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT1R_VOL_LIM_WIDTH 8 /* OUT1R_VOL_LIM - [7:0] */ + +/* + * R1047 (0x417) - Noise Gate Select 1R + */ +#define ARIZONA_OUT1R_NGATE_SRC_MASK 0x0FFF /* OUT1R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT1R_NGATE_SRC_SHIFT 0 /* OUT1R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT1R_NGATE_SRC_WIDTH 12 /* OUT1R_NGATE_SRC - [11:0] */ + +/* + * R1048 (0x418) - Output Path Config 2L + */ +#define ARIZONA_OUT2_LP_MODE 0x8000 /* OUT2_LP_MODE */ +#define ARIZONA_OUT2_LP_MODE_MASK 0x8000 /* OUT2_LP_MODE */ +#define ARIZONA_OUT2_LP_MODE_SHIFT 15 /* OUT2_LP_MODE */ +#define ARIZONA_OUT2_LP_MODE_WIDTH 1 /* OUT2_LP_MODE */ +#define ARIZONA_OUT2_OSR 0x2000 /* OUT2_OSR */ +#define ARIZONA_OUT2_OSR_MASK 0x2000 /* OUT2_OSR */ +#define ARIZONA_OUT2_OSR_SHIFT 13 /* OUT2_OSR */ +#define ARIZONA_OUT2_OSR_WIDTH 1 /* OUT2_OSR */ +#define ARIZONA_OUT2_MONO 0x1000 /* OUT2_MONO */ +#define ARIZONA_OUT2_MONO_MASK 0x1000 /* OUT2_MONO */ +#define ARIZONA_OUT2_MONO_SHIFT 12 /* OUT2_MONO */ +#define ARIZONA_OUT2_MONO_WIDTH 1 /* OUT2_MONO */ +#define ARIZONA_OUT2L_ANC_SRC_MASK 0x0C00 /* OUT2L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT2L_ANC_SRC_SHIFT 10 /* OUT2L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT2L_ANC_SRC_WIDTH 2 /* OUT2L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT2L_PGA_VOL_MASK 0x00FE /* OUT2L_PGA_VOL - [7:1] */ +#define ARIZONA_OUT2L_PGA_VOL_SHIFT 1 /* OUT2L_PGA_VOL - [7:1] */ +#define ARIZONA_OUT2L_PGA_VOL_WIDTH 7 /* OUT2L_PGA_VOL - [7:1] */ + +/* + * R1049 (0x419) - DAC Digital Volume 2L + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT2L_MUTE 0x0100 /* OUT2L_MUTE */ +#define ARIZONA_OUT2L_MUTE_MASK 0x0100 /* OUT2L_MUTE */ +#define ARIZONA_OUT2L_MUTE_SHIFT 8 /* OUT2L_MUTE */ +#define ARIZONA_OUT2L_MUTE_WIDTH 1 /* OUT2L_MUTE */ +#define ARIZONA_OUT2L_VOL_MASK 0x00FF /* OUT2L_VOL - [7:0] */ +#define ARIZONA_OUT2L_VOL_SHIFT 0 /* OUT2L_VOL - [7:0] */ +#define ARIZONA_OUT2L_VOL_WIDTH 8 /* OUT2L_VOL - [7:0] */ + +/* + * R1050 (0x41A) - DAC Volume Limit 2L + */ +#define ARIZONA_OUT2L_VOL_LIM_MASK 0x00FF /* OUT2L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT2L_VOL_LIM_SHIFT 0 /* OUT2L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT2L_VOL_LIM_WIDTH 8 /* OUT2L_VOL_LIM - [7:0] */ + +/* + * R1051 (0x41B) - Noise Gate Select 2L + */ +#define ARIZONA_OUT2L_NGATE_SRC_MASK 0x0FFF /* OUT2L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT2L_NGATE_SRC_SHIFT 0 /* OUT2L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT2L_NGATE_SRC_WIDTH 12 /* OUT2L_NGATE_SRC - [11:0] */ + +/* + * R1052 (0x41C) - Output Path Config 2R + */ +#define ARIZONA_OUT2R_ANC_SRC_MASK 0x0C00 /* OUT2R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT2R_ANC_SRC_SHIFT 10 /* OUT2R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT2R_ANC_SRC_WIDTH 2 /* OUT2R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT2R_PGA_VOL_MASK 0x00FE /* OUT2R_PGA_VOL - [7:1] */ +#define ARIZONA_OUT2R_PGA_VOL_SHIFT 1 /* OUT2R_PGA_VOL - [7:1] */ +#define ARIZONA_OUT2R_PGA_VOL_WIDTH 7 /* OUT2R_PGA_VOL - [7:1] */ + +/* + * R1053 (0x41D) - DAC Digital Volume 2R + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT2R_MUTE 0x0100 /* OUT2R_MUTE */ +#define ARIZONA_OUT2R_MUTE_MASK 0x0100 /* OUT2R_MUTE */ +#define ARIZONA_OUT2R_MUTE_SHIFT 8 /* OUT2R_MUTE */ +#define ARIZONA_OUT2R_MUTE_WIDTH 1 /* OUT2R_MUTE */ +#define ARIZONA_OUT2R_VOL_MASK 0x00FF /* OUT2R_VOL - [7:0] */ +#define ARIZONA_OUT2R_VOL_SHIFT 0 /* OUT2R_VOL - [7:0] */ +#define ARIZONA_OUT2R_VOL_WIDTH 8 /* OUT2R_VOL - [7:0] */ + +/* + * R1054 (0x41E) - DAC Volume Limit 2R + */ +#define ARIZONA_OUT2R_VOL_LIM_MASK 0x00FF /* OUT2R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT2R_VOL_LIM_SHIFT 0 /* OUT2R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT2R_VOL_LIM_WIDTH 8 /* OUT2R_VOL_LIM - [7:0] */ + +/* + * R1055 (0x41F) - Noise Gate Select 2R + */ +#define ARIZONA_OUT2R_NGATE_SRC_MASK 0x0FFF /* OUT2R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT2R_NGATE_SRC_SHIFT 0 /* OUT2R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT2R_NGATE_SRC_WIDTH 12 /* OUT2R_NGATE_SRC - [11:0] */ + +/* + * R1056 (0x420) - Output Path Config 3L + */ +#define ARIZONA_OUT3_LP_MODE 0x8000 /* OUT3_LP_MODE */ +#define ARIZONA_OUT3_LP_MODE_MASK 0x8000 /* OUT3_LP_MODE */ +#define ARIZONA_OUT3_LP_MODE_SHIFT 15 /* OUT3_LP_MODE */ +#define ARIZONA_OUT3_LP_MODE_WIDTH 1 /* OUT3_LP_MODE */ +#define ARIZONA_OUT3_OSR 0x2000 /* OUT3_OSR */ +#define ARIZONA_OUT3_OSR_MASK 0x2000 /* OUT3_OSR */ +#define ARIZONA_OUT3_OSR_SHIFT 13 /* OUT3_OSR */ +#define ARIZONA_OUT3_OSR_WIDTH 1 /* OUT3_OSR */ +#define ARIZONA_OUT3_MONO 0x1000 /* OUT3_MONO */ +#define ARIZONA_OUT3_MONO_MASK 0x1000 /* OUT3_MONO */ +#define ARIZONA_OUT3_MONO_SHIFT 12 /* OUT3_MONO */ +#define ARIZONA_OUT3_MONO_WIDTH 1 /* OUT3_MONO */ +#define ARIZONA_OUT3L_ANC_SRC_MASK 0x0C00 /* OUT3L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT3L_ANC_SRC_SHIFT 10 /* OUT3L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT3L_ANC_SRC_WIDTH 2 /* OUT3L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT3L_PGA_VOL_MASK 0x00FE /* OUT3L_PGA_VOL - [7:1] */ +#define ARIZONA_OUT3L_PGA_VOL_SHIFT 1 /* OUT3L_PGA_VOL - [7:1] */ +#define ARIZONA_OUT3L_PGA_VOL_WIDTH 7 /* OUT3L_PGA_VOL - [7:1] */ + +/* + * R1057 (0x421) - DAC Digital Volume 3L + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT3L_MUTE 0x0100 /* OUT3L_MUTE */ +#define ARIZONA_OUT3L_MUTE_MASK 0x0100 /* OUT3L_MUTE */ +#define ARIZONA_OUT3L_MUTE_SHIFT 8 /* OUT3L_MUTE */ +#define ARIZONA_OUT3L_MUTE_WIDTH 1 /* OUT3L_MUTE */ +#define ARIZONA_OUT3L_VOL_MASK 0x00FF /* OUT3L_VOL - [7:0] */ +#define ARIZONA_OUT3L_VOL_SHIFT 0 /* OUT3L_VOL - [7:0] */ +#define ARIZONA_OUT3L_VOL_WIDTH 8 /* OUT3L_VOL - [7:0] */ + +/* + * R1058 (0x422) - DAC Volume Limit 3L + */ +#define ARIZONA_OUT3L_VOL_LIM_MASK 0x00FF /* OUT3L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT3L_VOL_LIM_SHIFT 0 /* OUT3L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT3L_VOL_LIM_WIDTH 8 /* OUT3L_VOL_LIM - [7:0] */ + +/* + * R1059 (0x423) - Noise Gate Select 3L + */ +#define ARIZONA_OUT3_NGATE_SRC_MASK 0x0FFF /* OUT3_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT3_NGATE_SRC_SHIFT 0 /* OUT3_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT3_NGATE_SRC_WIDTH 12 /* OUT3_NGATE_SRC - [11:0] */ + +/* + * R1060 (0x424) - Output Path Config 3R + */ +#define ARIZONA_OUT3R_PGA_VOL_MASK 0x00FE /* OUT3R_PGA_VOL - [7:1] */ +#define ARIZONA_OUT3R_PGA_VOL_SHIFT 1 /* OUT3R_PGA_VOL - [7:1] */ +#define ARIZONA_OUT3R_PGA_VOL_WIDTH 7 /* OUT3R_PGA_VOL - [7:1] */ + +/* + * R1061 (0x425) - DAC Digital Volume 3R + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT3R_MUTE 0x0100 /* OUT3R_MUTE */ +#define ARIZONA_OUT3R_MUTE_MASK 0x0100 /* OUT3R_MUTE */ +#define ARIZONA_OUT3R_MUTE_SHIFT 8 /* OUT3R_MUTE */ +#define ARIZONA_OUT3R_MUTE_WIDTH 1 /* OUT3R_MUTE */ +#define ARIZONA_OUT3R_VOL_MASK 0x00FF /* OUT3R_VOL - [7:0] */ +#define ARIZONA_OUT3R_VOL_SHIFT 0 /* OUT3R_VOL - [7:0] */ +#define ARIZONA_OUT3R_VOL_WIDTH 8 /* OUT3R_VOL - [7:0] */ + +/* + * R1062 (0x426) - DAC Volume Limit 3R + */ +#define ARIZONA_OUT3R_ANC_SRC_MASK 0x0C00 /* OUT3R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT3R_ANC_SRC_SHIFT 10 /* OUT3R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT3R_ANC_SRC_WIDTH 2 /* OUT3R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT3R_VOL_LIM_MASK 0x00FF /* OUT3R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT3R_VOL_LIM_SHIFT 0 /* OUT3R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT3R_VOL_LIM_WIDTH 8 /* OUT3R_VOL_LIM - [7:0] */ + +/* + * R1064 (0x428) - Output Path Config 4L + */ +#define ARIZONA_OUT4_OSR 0x2000 /* OUT4_OSR */ +#define ARIZONA_OUT4_OSR_MASK 0x2000 /* OUT4_OSR */ +#define ARIZONA_OUT4_OSR_SHIFT 13 /* OUT4_OSR */ +#define ARIZONA_OUT4_OSR_WIDTH 1 /* OUT4_OSR */ +#define ARIZONA_OUT4L_ANC_SRC_MASK 0x0C00 /* OUT4L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT4L_ANC_SRC_SHIFT 10 /* OUT4L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT4L_ANC_SRC_WIDTH 2 /* OUT4L_ANC_SRC - [11:10] */ + +/* + * R1065 (0x429) - DAC Digital Volume 4L + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT4L_MUTE 0x0100 /* OUT4L_MUTE */ +#define ARIZONA_OUT4L_MUTE_MASK 0x0100 /* OUT4L_MUTE */ +#define ARIZONA_OUT4L_MUTE_SHIFT 8 /* OUT4L_MUTE */ +#define ARIZONA_OUT4L_MUTE_WIDTH 1 /* OUT4L_MUTE */ +#define ARIZONA_OUT4L_VOL_MASK 0x00FF /* OUT4L_VOL - [7:0] */ +#define ARIZONA_OUT4L_VOL_SHIFT 0 /* OUT4L_VOL - [7:0] */ +#define ARIZONA_OUT4L_VOL_WIDTH 8 /* OUT4L_VOL - [7:0] */ + +/* + * R1066 (0x42A) - Out Volume 4L + */ +#define ARIZONA_OUT4L_VOL_LIM_MASK 0x00FF /* OUT4L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT4L_VOL_LIM_SHIFT 0 /* OUT4L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT4L_VOL_LIM_WIDTH 8 /* OUT4L_VOL_LIM - [7:0] */ + +/* + * R1067 (0x42B) - Noise Gate Select 4L + */ +#define ARIZONA_OUT4L_NGATE_SRC_MASK 0x0FFF /* OUT4L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT4L_NGATE_SRC_SHIFT 0 /* OUT4L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT4L_NGATE_SRC_WIDTH 12 /* OUT4L_NGATE_SRC - [11:0] */ + +/* + * R1068 (0x42C) - Output Path Config 4R + */ +#define ARIZONA_OUT4R_ANC_SRC_MASK 0x0C00 /* OUT4R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT4R_ANC_SRC_SHIFT 10 /* OUT4R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT4R_ANC_SRC_WIDTH 2 /* OUT4R_ANC_SRC - [11:10] */ + +/* + * R1069 (0x42D) - DAC Digital Volume 4R + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT4R_MUTE 0x0100 /* OUT4R_MUTE */ +#define ARIZONA_OUT4R_MUTE_MASK 0x0100 /* OUT4R_MUTE */ +#define ARIZONA_OUT4R_MUTE_SHIFT 8 /* OUT4R_MUTE */ +#define ARIZONA_OUT4R_MUTE_WIDTH 1 /* OUT4R_MUTE */ +#define ARIZONA_OUT4R_VOL_MASK 0x00FF /* OUT4R_VOL - [7:0] */ +#define ARIZONA_OUT4R_VOL_SHIFT 0 /* OUT4R_VOL - [7:0] */ +#define ARIZONA_OUT4R_VOL_WIDTH 8 /* OUT4R_VOL - [7:0] */ + +/* + * R1070 (0x42E) - Out Volume 4R + */ +#define ARIZONA_OUT4R_VOL_LIM_MASK 0x00FF /* OUT4R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT4R_VOL_LIM_SHIFT 0 /* OUT4R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT4R_VOL_LIM_WIDTH 8 /* OUT4R_VOL_LIM - [7:0] */ + +/* + * R1071 (0x42F) - Noise Gate Select 4R + */ +#define ARIZONA_OUT4R_NGATE_SRC_MASK 0x0FFF /* OUT4R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT4R_NGATE_SRC_SHIFT 0 /* OUT4R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT4R_NGATE_SRC_WIDTH 12 /* OUT4R_NGATE_SRC - [11:0] */ + +/* + * R1072 (0x430) - Output Path Config 5L + */ +#define ARIZONA_OUT5_OSR 0x2000 /* OUT5_OSR */ +#define ARIZONA_OUT5_OSR_MASK 0x2000 /* OUT5_OSR */ +#define ARIZONA_OUT5_OSR_SHIFT 13 /* OUT5_OSR */ +#define ARIZONA_OUT5_OSR_WIDTH 1 /* OUT5_OSR */ +#define ARIZONA_OUT5L_ANC_SRC_MASK 0x0C00 /* OUT5L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT5L_ANC_SRC_SHIFT 10 /* OUT5L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT5L_ANC_SRC_WIDTH 2 /* OUT5L_ANC_SRC - [11:10] */ + +/* + * R1073 (0x431) - DAC Digital Volume 5L + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT5L_MUTE 0x0100 /* OUT5L_MUTE */ +#define ARIZONA_OUT5L_MUTE_MASK 0x0100 /* OUT5L_MUTE */ +#define ARIZONA_OUT5L_MUTE_SHIFT 8 /* OUT5L_MUTE */ +#define ARIZONA_OUT5L_MUTE_WIDTH 1 /* OUT5L_MUTE */ +#define ARIZONA_OUT5L_VOL_MASK 0x00FF /* OUT5L_VOL - [7:0] */ +#define ARIZONA_OUT5L_VOL_SHIFT 0 /* OUT5L_VOL - [7:0] */ +#define ARIZONA_OUT5L_VOL_WIDTH 8 /* OUT5L_VOL - [7:0] */ + +/* + * R1074 (0x432) - DAC Volume Limit 5L + */ +#define ARIZONA_OUT5L_VOL_LIM_MASK 0x00FF /* OUT5L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT5L_VOL_LIM_SHIFT 0 /* OUT5L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT5L_VOL_LIM_WIDTH 8 /* OUT5L_VOL_LIM - [7:0] */ + +/* + * R1075 (0x433) - Noise Gate Select 5L + */ +#define ARIZONA_OUT5L_NGATE_SRC_MASK 0x0FFF /* OUT5L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT5L_NGATE_SRC_SHIFT 0 /* OUT5L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT5L_NGATE_SRC_WIDTH 12 /* OUT5L_NGATE_SRC - [11:0] */ + +/* + * R1076 (0x434) - Output Path Config 5R + */ +#define ARIZONA_OUT5R_ANC_SRC_MASK 0x0C00 /* OUT5R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT5R_ANC_SRC_SHIFT 10 /* OUT5R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT5R_ANC_SRC_WIDTH 2 /* OUT5R_ANC_SRC - [11:10] */ + +/* + * R1077 (0x435) - DAC Digital Volume 5R + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT5R_MUTE 0x0100 /* OUT5R_MUTE */ +#define ARIZONA_OUT5R_MUTE_MASK 0x0100 /* OUT5R_MUTE */ +#define ARIZONA_OUT5R_MUTE_SHIFT 8 /* OUT5R_MUTE */ +#define ARIZONA_OUT5R_MUTE_WIDTH 1 /* OUT5R_MUTE */ +#define ARIZONA_OUT5R_VOL_MASK 0x00FF /* OUT5R_VOL - [7:0] */ +#define ARIZONA_OUT5R_VOL_SHIFT 0 /* OUT5R_VOL - [7:0] */ +#define ARIZONA_OUT5R_VOL_WIDTH 8 /* OUT5R_VOL - [7:0] */ + +/* + * R1078 (0x436) - DAC Volume Limit 5R + */ +#define ARIZONA_OUT5R_VOL_LIM_MASK 0x00FF /* OUT5R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT5R_VOL_LIM_SHIFT 0 /* OUT5R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT5R_VOL_LIM_WIDTH 8 /* OUT5R_VOL_LIM - [7:0] */ + +/* + * R1079 (0x437) - Noise Gate Select 5R + */ +#define ARIZONA_OUT5R_NGATE_SRC_MASK 0x0FFF /* OUT5R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT5R_NGATE_SRC_SHIFT 0 /* OUT5R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT5R_NGATE_SRC_WIDTH 12 /* OUT5R_NGATE_SRC - [11:0] */ + +/* + * R1104 (0x450) - DAC AEC Control 1 + */ +#define ARIZONA_AEC_LOOPBACK_SRC_MASK 0x003C /* AEC_LOOPBACK_SRC - [5:2] */ +#define ARIZONA_AEC_LOOPBACK_SRC_SHIFT 2 /* AEC_LOOPBACK_SRC - [5:2] */ +#define ARIZONA_AEC_LOOPBACK_SRC_WIDTH 4 /* AEC_LOOPBACK_SRC - [5:2] */ +#define ARIZONA_AEC_ENA_STS 0x0002 /* AEC_ENA_STS */ +#define ARIZONA_AEC_ENA_STS_MASK 0x0002 /* AEC_ENA_STS */ +#define ARIZONA_AEC_ENA_STS_SHIFT 1 /* AEC_ENA_STS */ +#define ARIZONA_AEC_ENA_STS_WIDTH 1 /* AEC_ENA_STS */ +#define ARIZONA_AEC_LOOPBACK_ENA 0x0001 /* AEC_LOOPBACK_ENA */ +#define ARIZONA_AEC_LOOPBACK_ENA_MASK 0x0001 /* AEC_LOOPBACK_ENA */ +#define ARIZONA_AEC_LOOPBACK_ENA_SHIFT 0 /* AEC_LOOPBACK_ENA */ +#define ARIZONA_AEC_LOOPBACK_ENA_WIDTH 1 /* AEC_LOOPBACK_ENA */ + +/* + * R1112 (0x458) - Noise Gate Control + */ +#define ARIZONA_NGATE_HOLD_MASK 0x0030 /* NGATE_HOLD - [5:4] */ +#define ARIZONA_NGATE_HOLD_SHIFT 4 /* NGATE_HOLD - [5:4] */ +#define ARIZONA_NGATE_HOLD_WIDTH 2 /* NGATE_HOLD - [5:4] */ +#define ARIZONA_NGATE_THR_MASK 0x000E /* NGATE_THR - [3:1] */ +#define ARIZONA_NGATE_THR_SHIFT 1 /* NGATE_THR - [3:1] */ +#define ARIZONA_NGATE_THR_WIDTH 3 /* NGATE_THR - [3:1] */ +#define ARIZONA_NGATE_ENA 0x0001 /* NGATE_ENA */ +#define ARIZONA_NGATE_ENA_MASK 0x0001 /* NGATE_ENA */ +#define ARIZONA_NGATE_ENA_SHIFT 0 /* NGATE_ENA */ +#define ARIZONA_NGATE_ENA_WIDTH 1 /* NGATE_ENA */ + +/* + * R1168 (0x490) - PDM SPK1 CTRL 1 + */ +#define ARIZONA_SPK1R_MUTE 0x2000 /* SPK1R_MUTE */ +#define ARIZONA_SPK1R_MUTE_MASK 0x2000 /* SPK1R_MUTE */ +#define ARIZONA_SPK1R_MUTE_SHIFT 13 /* SPK1R_MUTE */ +#define ARIZONA_SPK1R_MUTE_WIDTH 1 /* SPK1R_MUTE */ +#define ARIZONA_SPK1L_MUTE 0x1000 /* SPK1L_MUTE */ +#define ARIZONA_SPK1L_MUTE_MASK 0x1000 /* SPK1L_MUTE */ +#define ARIZONA_SPK1L_MUTE_SHIFT 12 /* SPK1L_MUTE */ +#define ARIZONA_SPK1L_MUTE_WIDTH 1 /* SPK1L_MUTE */ +#define ARIZONA_SPK1_MUTE_ENDIAN 0x0100 /* SPK1_MUTE_ENDIAN */ +#define ARIZONA_SPK1_MUTE_ENDIAN_MASK 0x0100 /* SPK1_MUTE_ENDIAN */ +#define ARIZONA_SPK1_MUTE_ENDIAN_SHIFT 8 /* SPK1_MUTE_ENDIAN */ +#define ARIZONA_SPK1_MUTE_ENDIAN_WIDTH 1 /* SPK1_MUTE_ENDIAN */ +#define ARIZONA_SPK1_MUTE_SEQ1_MASK 0x00FF /* SPK1_MUTE_SEQ1 - [7:0] */ +#define ARIZONA_SPK1_MUTE_SEQ1_SHIFT 0 /* SPK1_MUTE_SEQ1 - [7:0] */ +#define ARIZONA_SPK1_MUTE_SEQ1_WIDTH 8 /* SPK1_MUTE_SEQ1 - [7:0] */ + +/* + * R1169 (0x491) - PDM SPK1 CTRL 2 + */ +#define ARIZONA_SPK1_FMT 0x0001 /* SPK1_FMT */ +#define ARIZONA_SPK1_FMT_MASK 0x0001 /* SPK1_FMT */ +#define ARIZONA_SPK1_FMT_SHIFT 0 /* SPK1_FMT */ +#define ARIZONA_SPK1_FMT_WIDTH 1 /* SPK1_FMT */ + +/* + * R1244 (0x4DC) - DAC comp 1 + */ +#define ARIZONA_OUT_COMP_COEFF_MASK 0xFFFF /* OUT_COMP_COEFF - [15:0] */ +#define ARIZONA_OUT_COMP_COEFF_SHIFT 0 /* OUT_COMP_COEFF - [15:0] */ +#define ARIZONA_OUT_COMP_COEFF_WIDTH 16 /* OUT_COMP_COEFF - [15:0] */ + +/* + * R1245 (0x4DD) - DAC comp 2 + */ +#define ARIZONA_OUT_COMP_COEFF_1 0x0002 /* OUT_COMP_COEFF */ +#define ARIZONA_OUT_COMP_COEFF_1_MASK 0x0002 /* OUT_COMP_COEFF */ +#define ARIZONA_OUT_COMP_COEFF_1_SHIFT 1 /* OUT_COMP_COEFF */ +#define ARIZONA_OUT_COMP_COEFF_1_WIDTH 1 /* OUT_COMP_COEFF */ +#define ARIZONA_OUT_COMP_COEFF_SEL 0x0001 /* OUT_COMP_COEFF_SEL */ +#define ARIZONA_OUT_COMP_COEFF_SEL_MASK 0x0001 /* OUT_COMP_COEFF_SEL */ +#define ARIZONA_OUT_COMP_COEFF_SEL_SHIFT 0 /* OUT_COMP_COEFF_SEL */ +#define ARIZONA_OUT_COMP_COEFF_SEL_WIDTH 1 /* OUT_COMP_COEFF_SEL */ + +/* + * R1246 (0x4DE) - DAC comp 3 + */ +#define ARIZONA_AEC_COMP_COEFF_MASK 0xFFFF /* AEC_COMP_COEFF - [15:0] */ +#define ARIZONA_AEC_COMP_COEFF_SHIFT 0 /* AEC_COMP_COEFF - [15:0] */ +#define ARIZONA_AEC_COMP_COEFF_WIDTH 16 /* AEC_COMP_COEFF - [15:0] */ + +/* + * R1247 (0x4DF) - DAC comp 4 + */ +#define ARIZONA_AEC_COMP_COEFF_1 0x0002 /* AEC_COMP_COEFF */ +#define ARIZONA_AEC_COMP_COEFF_1_MASK 0x0002 /* AEC_COMP_COEFF */ +#define ARIZONA_AEC_COMP_COEFF_1_SHIFT 1 /* AEC_COMP_COEFF */ +#define ARIZONA_AEC_COMP_COEFF_1_WIDTH 1 /* AEC_COMP_COEFF */ +#define ARIZONA_AEC_COMP_COEFF_SEL 0x0001 /* AEC_COMP_COEFF_SEL */ +#define ARIZONA_AEC_COMP_COEFF_SEL_MASK 0x0001 /* AEC_COMP_COEFF_SEL */ +#define ARIZONA_AEC_COMP_COEFF_SEL_SHIFT 0 /* AEC_COMP_COEFF_SEL */ +#define ARIZONA_AEC_COMP_COEFF_SEL_WIDTH 1 /* AEC_COMP_COEFF_SEL */ + +/* + * R1280 (0x500) - AIF1 BCLK Ctrl + */ +#define ARIZONA_AIF1_BCLK_INV 0x0080 /* AIF1_BCLK_INV */ +#define ARIZONA_AIF1_BCLK_INV_MASK 0x0080 /* AIF1_BCLK_INV */ +#define ARIZONA_AIF1_BCLK_INV_SHIFT 7 /* AIF1_BCLK_INV */ +#define ARIZONA_AIF1_BCLK_INV_WIDTH 1 /* AIF1_BCLK_INV */ +#define ARIZONA_AIF1_BCLK_FRC 0x0040 /* AIF1_BCLK_FRC */ +#define ARIZONA_AIF1_BCLK_FRC_MASK 0x0040 /* AIF1_BCLK_FRC */ +#define ARIZONA_AIF1_BCLK_FRC_SHIFT 6 /* AIF1_BCLK_FRC */ +#define ARIZONA_AIF1_BCLK_FRC_WIDTH 1 /* AIF1_BCLK_FRC */ +#define ARIZONA_AIF1_BCLK_MSTR 0x0020 /* AIF1_BCLK_MSTR */ +#define ARIZONA_AIF1_BCLK_MSTR_MASK 0x0020 /* AIF1_BCLK_MSTR */ +#define ARIZONA_AIF1_BCLK_MSTR_SHIFT 5 /* AIF1_BCLK_MSTR */ +#define ARIZONA_AIF1_BCLK_MSTR_WIDTH 1 /* AIF1_BCLK_MSTR */ +#define ARIZONA_AIF1_BCLK_FREQ_MASK 0x001F /* AIF1_BCLK_FREQ - [4:0] */ +#define ARIZONA_AIF1_BCLK_FREQ_SHIFT 0 /* AIF1_BCLK_FREQ - [4:0] */ +#define ARIZONA_AIF1_BCLK_FREQ_WIDTH 5 /* AIF1_BCLK_FREQ - [4:0] */ + +/* + * R1281 (0x501) - AIF1 Tx Pin Ctrl + */ +#define ARIZONA_AIF1TX_DAT_TRI 0x0020 /* AIF1TX_DAT_TRI */ +#define ARIZONA_AIF1TX_DAT_TRI_MASK 0x0020 /* AIF1TX_DAT_TRI */ +#define ARIZONA_AIF1TX_DAT_TRI_SHIFT 5 /* AIF1TX_DAT_TRI */ +#define ARIZONA_AIF1TX_DAT_TRI_WIDTH 1 /* AIF1TX_DAT_TRI */ +#define ARIZONA_AIF1TX_LRCLK_SRC 0x0008 /* AIF1TX_LRCLK_SRC */ +#define ARIZONA_AIF1TX_LRCLK_SRC_MASK 0x0008 /* AIF1TX_LRCLK_SRC */ +#define ARIZONA_AIF1TX_LRCLK_SRC_SHIFT 3 /* AIF1TX_LRCLK_SRC */ +#define ARIZONA_AIF1TX_LRCLK_SRC_WIDTH 1 /* AIF1TX_LRCLK_SRC */ +#define ARIZONA_AIF1TX_LRCLK_INV 0x0004 /* AIF1TX_LRCLK_INV */ +#define ARIZONA_AIF1TX_LRCLK_INV_MASK 0x0004 /* AIF1TX_LRCLK_INV */ +#define ARIZONA_AIF1TX_LRCLK_INV_SHIFT 2 /* AIF1TX_LRCLK_INV */ +#define ARIZONA_AIF1TX_LRCLK_INV_WIDTH 1 /* AIF1TX_LRCLK_INV */ +#define ARIZONA_AIF1TX_LRCLK_FRC 0x0002 /* AIF1TX_LRCLK_FRC */ +#define ARIZONA_AIF1TX_LRCLK_FRC_MASK 0x0002 /* AIF1TX_LRCLK_FRC */ +#define ARIZONA_AIF1TX_LRCLK_FRC_SHIFT 1 /* AIF1TX_LRCLK_FRC */ +#define ARIZONA_AIF1TX_LRCLK_FRC_WIDTH 1 /* AIF1TX_LRCLK_FRC */ +#define ARIZONA_AIF1TX_LRCLK_MSTR 0x0001 /* AIF1TX_LRCLK_MSTR */ +#define ARIZONA_AIF1TX_LRCLK_MSTR_MASK 0x0001 /* AIF1TX_LRCLK_MSTR */ +#define ARIZONA_AIF1TX_LRCLK_MSTR_SHIFT 0 /* AIF1TX_LRCLK_MSTR */ +#define ARIZONA_AIF1TX_LRCLK_MSTR_WIDTH 1 /* AIF1TX_LRCLK_MSTR */ + +/* + * R1282 (0x502) - AIF1 Rx Pin Ctrl + */ +#define ARIZONA_AIF1RX_LRCLK_INV 0x0004 /* AIF1RX_LRCLK_INV */ +#define ARIZONA_AIF1RX_LRCLK_INV_MASK 0x0004 /* AIF1RX_LRCLK_INV */ +#define ARIZONA_AIF1RX_LRCLK_INV_SHIFT 2 /* AIF1RX_LRCLK_INV */ +#define ARIZONA_AIF1RX_LRCLK_INV_WIDTH 1 /* AIF1RX_LRCLK_INV */ +#define ARIZONA_AIF1RX_LRCLK_FRC 0x0002 /* AIF1RX_LRCLK_FRC */ +#define ARIZONA_AIF1RX_LRCLK_FRC_MASK 0x0002 /* AIF1RX_LRCLK_FRC */ +#define ARIZONA_AIF1RX_LRCLK_FRC_SHIFT 1 /* AIF1RX_LRCLK_FRC */ +#define ARIZONA_AIF1RX_LRCLK_FRC_WIDTH 1 /* AIF1RX_LRCLK_FRC */ +#define ARIZONA_AIF1RX_LRCLK_MSTR 0x0001 /* AIF1RX_LRCLK_MSTR */ +#define ARIZONA_AIF1RX_LRCLK_MSTR_MASK 0x0001 /* AIF1RX_LRCLK_MSTR */ +#define ARIZONA_AIF1RX_LRCLK_MSTR_SHIFT 0 /* AIF1RX_LRCLK_MSTR */ +#define ARIZONA_AIF1RX_LRCLK_MSTR_WIDTH 1 /* AIF1RX_LRCLK_MSTR */ + +/* + * R1283 (0x503) - AIF1 Rate Ctrl + */ +#define ARIZONA_AIF1_RATE_MASK 0x7800 /* AIF1_RATE - [14:11] */ +#define ARIZONA_AIF1_RATE_SHIFT 11 /* AIF1_RATE - [14:11] */ +#define ARIZONA_AIF1_RATE_WIDTH 4 /* AIF1_RATE - [14:11] */ +#define ARIZONA_AIF1_TRI 0x0040 /* AIF1_TRI */ +#define ARIZONA_AIF1_TRI_MASK 0x0040 /* AIF1_TRI */ +#define ARIZONA_AIF1_TRI_SHIFT 6 /* AIF1_TRI */ +#define ARIZONA_AIF1_TRI_WIDTH 1 /* AIF1_TRI */ + +/* + * R1284 (0x504) - AIF1 Format + */ +#define ARIZONA_AIF1_FMT_MASK 0x0007 /* AIF1_FMT - [2:0] */ +#define ARIZONA_AIF1_FMT_SHIFT 0 /* AIF1_FMT - [2:0] */ +#define ARIZONA_AIF1_FMT_WIDTH 3 /* AIF1_FMT - [2:0] */ + +/* + * R1285 (0x505) - AIF1 Tx BCLK Rate + */ +#define ARIZONA_AIF1TX_BCPF_MASK 0x1FFF /* AIF1TX_BCPF - [12:0] */ +#define ARIZONA_AIF1TX_BCPF_SHIFT 0 /* AIF1TX_BCPF - [12:0] */ +#define ARIZONA_AIF1TX_BCPF_WIDTH 13 /* AIF1TX_BCPF - [12:0] */ + +/* + * R1286 (0x506) - AIF1 Rx BCLK Rate + */ +#define ARIZONA_AIF1RX_BCPF_MASK 0x1FFF /* AIF1RX_BCPF - [12:0] */ +#define ARIZONA_AIF1RX_BCPF_SHIFT 0 /* AIF1RX_BCPF - [12:0] */ +#define ARIZONA_AIF1RX_BCPF_WIDTH 13 /* AIF1RX_BCPF - [12:0] */ + +/* + * R1287 (0x507) - AIF1 Frame Ctrl 1 + */ +#define ARIZONA_AIF1TX_WL_MASK 0x3F00 /* AIF1TX_WL - [13:8] */ +#define ARIZONA_AIF1TX_WL_SHIFT 8 /* AIF1TX_WL - [13:8] */ +#define ARIZONA_AIF1TX_WL_WIDTH 6 /* AIF1TX_WL - [13:8] */ +#define ARIZONA_AIF1TX_SLOT_LEN_MASK 0x00FF /* AIF1TX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF1TX_SLOT_LEN_SHIFT 0 /* AIF1TX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF1TX_SLOT_LEN_WIDTH 8 /* AIF1TX_SLOT_LEN - [7:0] */ + +/* + * R1288 (0x508) - AIF1 Frame Ctrl 2 + */ +#define ARIZONA_AIF1RX_WL_MASK 0x3F00 /* AIF1RX_WL - [13:8] */ +#define ARIZONA_AIF1RX_WL_SHIFT 8 /* AIF1RX_WL - [13:8] */ +#define ARIZONA_AIF1RX_WL_WIDTH 6 /* AIF1RX_WL - [13:8] */ +#define ARIZONA_AIF1RX_SLOT_LEN_MASK 0x00FF /* AIF1RX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF1RX_SLOT_LEN_SHIFT 0 /* AIF1RX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF1RX_SLOT_LEN_WIDTH 8 /* AIF1RX_SLOT_LEN - [7:0] */ + +/* + * R1289 (0x509) - AIF1 Frame Ctrl 3 + */ +#define ARIZONA_AIF1TX1_SLOT_MASK 0x003F /* AIF1TX1_SLOT - [5:0] */ +#define ARIZONA_AIF1TX1_SLOT_SHIFT 0 /* AIF1TX1_SLOT - [5:0] */ +#define ARIZONA_AIF1TX1_SLOT_WIDTH 6 /* AIF1TX1_SLOT - [5:0] */ + +/* + * R1290 (0x50A) - AIF1 Frame Ctrl 4 + */ +#define ARIZONA_AIF1TX2_SLOT_MASK 0x003F /* AIF1TX2_SLOT - [5:0] */ +#define ARIZONA_AIF1TX2_SLOT_SHIFT 0 /* AIF1TX2_SLOT - [5:0] */ +#define ARIZONA_AIF1TX2_SLOT_WIDTH 6 /* AIF1TX2_SLOT - [5:0] */ + +/* + * R1291 (0x50B) - AIF1 Frame Ctrl 5 + */ +#define ARIZONA_AIF1TX3_SLOT_MASK 0x003F /* AIF1TX3_SLOT - [5:0] */ +#define ARIZONA_AIF1TX3_SLOT_SHIFT 0 /* AIF1TX3_SLOT - [5:0] */ +#define ARIZONA_AIF1TX3_SLOT_WIDTH 6 /* AIF1TX3_SLOT - [5:0] */ + +/* + * R1292 (0x50C) - AIF1 Frame Ctrl 6 + */ +#define ARIZONA_AIF1TX4_SLOT_MASK 0x003F /* AIF1TX4_SLOT - [5:0] */ +#define ARIZONA_AIF1TX4_SLOT_SHIFT 0 /* AIF1TX4_SLOT - [5:0] */ +#define ARIZONA_AIF1TX4_SLOT_WIDTH 6 /* AIF1TX4_SLOT - [5:0] */ + +/* + * R1293 (0x50D) - AIF1 Frame Ctrl 7 + */ +#define ARIZONA_AIF1TX5_SLOT_MASK 0x003F /* AIF1TX5_SLOT - [5:0] */ +#define ARIZONA_AIF1TX5_SLOT_SHIFT 0 /* AIF1TX5_SLOT - [5:0] */ +#define ARIZONA_AIF1TX5_SLOT_WIDTH 6 /* AIF1TX5_SLOT - [5:0] */ + +/* + * R1294 (0x50E) - AIF1 Frame Ctrl 8 + */ +#define ARIZONA_AIF1TX6_SLOT_MASK 0x003F /* AIF1TX6_SLOT - [5:0] */ +#define ARIZONA_AIF1TX6_SLOT_SHIFT 0 /* AIF1TX6_SLOT - [5:0] */ +#define ARIZONA_AIF1TX6_SLOT_WIDTH 6 /* AIF1TX6_SLOT - [5:0] */ + +/* + * R1295 (0x50F) - AIF1 Frame Ctrl 9 + */ +#define ARIZONA_AIF1TX7_SLOT_MASK 0x003F /* AIF1TX7_SLOT - [5:0] */ +#define ARIZONA_AIF1TX7_SLOT_SHIFT 0 /* AIF1TX7_SLOT - [5:0] */ +#define ARIZONA_AIF1TX7_SLOT_WIDTH 6 /* AIF1TX7_SLOT - [5:0] */ + +/* + * R1296 (0x510) - AIF1 Frame Ctrl 10 + */ +#define ARIZONA_AIF1TX8_SLOT_MASK 0x003F /* AIF1TX8_SLOT - [5:0] */ +#define ARIZONA_AIF1TX8_SLOT_SHIFT 0 /* AIF1TX8_SLOT - [5:0] */ +#define ARIZONA_AIF1TX8_SLOT_WIDTH 6 /* AIF1TX8_SLOT - [5:0] */ + +/* + * R1297 (0x511) - AIF1 Frame Ctrl 11 + */ +#define ARIZONA_AIF1RX1_SLOT_MASK 0x003F /* AIF1RX1_SLOT - [5:0] */ +#define ARIZONA_AIF1RX1_SLOT_SHIFT 0 /* AIF1RX1_SLOT - [5:0] */ +#define ARIZONA_AIF1RX1_SLOT_WIDTH 6 /* AIF1RX1_SLOT - [5:0] */ + +/* + * R1298 (0x512) - AIF1 Frame Ctrl 12 + */ +#define ARIZONA_AIF1RX2_SLOT_MASK 0x003F /* AIF1RX2_SLOT - [5:0] */ +#define ARIZONA_AIF1RX2_SLOT_SHIFT 0 /* AIF1RX2_SLOT - [5:0] */ +#define ARIZONA_AIF1RX2_SLOT_WIDTH 6 /* AIF1RX2_SLOT - [5:0] */ + +/* + * R1299 (0x513) - AIF1 Frame Ctrl 13 + */ +#define ARIZONA_AIF1RX3_SLOT_MASK 0x003F /* AIF1RX3_SLOT - [5:0] */ +#define ARIZONA_AIF1RX3_SLOT_SHIFT 0 /* AIF1RX3_SLOT - [5:0] */ +#define ARIZONA_AIF1RX3_SLOT_WIDTH 6 /* AIF1RX3_SLOT - [5:0] */ + +/* + * R1300 (0x514) - AIF1 Frame Ctrl 14 + */ +#define ARIZONA_AIF1RX4_SLOT_MASK 0x003F /* AIF1RX4_SLOT - [5:0] */ +#define ARIZONA_AIF1RX4_SLOT_SHIFT 0 /* AIF1RX4_SLOT - [5:0] */ +#define ARIZONA_AIF1RX4_SLOT_WIDTH 6 /* AIF1RX4_SLOT - [5:0] */ + +/* + * R1301 (0x515) - AIF1 Frame Ctrl 15 + */ +#define ARIZONA_AIF1RX5_SLOT_MASK 0x003F /* AIF1RX5_SLOT - [5:0] */ +#define ARIZONA_AIF1RX5_SLOT_SHIFT 0 /* AIF1RX5_SLOT - [5:0] */ +#define ARIZONA_AIF1RX5_SLOT_WIDTH 6 /* AIF1RX5_SLOT - [5:0] */ + +/* + * R1302 (0x516) - AIF1 Frame Ctrl 16 + */ +#define ARIZONA_AIF1RX6_SLOT_MASK 0x003F /* AIF1RX6_SLOT - [5:0] */ +#define ARIZONA_AIF1RX6_SLOT_SHIFT 0 /* AIF1RX6_SLOT - [5:0] */ +#define ARIZONA_AIF1RX6_SLOT_WIDTH 6 /* AIF1RX6_SLOT - [5:0] */ + +/* + * R1303 (0x517) - AIF1 Frame Ctrl 17 + */ +#define ARIZONA_AIF1RX7_SLOT_MASK 0x003F /* AIF1RX7_SLOT - [5:0] */ +#define ARIZONA_AIF1RX7_SLOT_SHIFT 0 /* AIF1RX7_SLOT - [5:0] */ +#define ARIZONA_AIF1RX7_SLOT_WIDTH 6 /* AIF1RX7_SLOT - [5:0] */ + +/* + * R1304 (0x518) - AIF1 Frame Ctrl 18 + */ +#define ARIZONA_AIF1RX8_SLOT_MASK 0x003F /* AIF1RX8_SLOT - [5:0] */ +#define ARIZONA_AIF1RX8_SLOT_SHIFT 0 /* AIF1RX8_SLOT - [5:0] */ +#define ARIZONA_AIF1RX8_SLOT_WIDTH 6 /* AIF1RX8_SLOT - [5:0] */ + +/* + * R1305 (0x519) - AIF1 Tx Enables + */ +#define ARIZONA_AIF1TX8_ENA 0x0080 /* AIF1TX8_ENA */ +#define ARIZONA_AIF1TX8_ENA_MASK 0x0080 /* AIF1TX8_ENA */ +#define ARIZONA_AIF1TX8_ENA_SHIFT 7 /* AIF1TX8_ENA */ +#define ARIZONA_AIF1TX8_ENA_WIDTH 1 /* AIF1TX8_ENA */ +#define ARIZONA_AIF1TX7_ENA 0x0040 /* AIF1TX7_ENA */ +#define ARIZONA_AIF1TX7_ENA_MASK 0x0040 /* AIF1TX7_ENA */ +#define ARIZONA_AIF1TX7_ENA_SHIFT 6 /* AIF1TX7_ENA */ +#define ARIZONA_AIF1TX7_ENA_WIDTH 1 /* AIF1TX7_ENA */ +#define ARIZONA_AIF1TX6_ENA 0x0020 /* AIF1TX6_ENA */ +#define ARIZONA_AIF1TX6_ENA_MASK 0x0020 /* AIF1TX6_ENA */ +#define ARIZONA_AIF1TX6_ENA_SHIFT 5 /* AIF1TX6_ENA */ +#define ARIZONA_AIF1TX6_ENA_WIDTH 1 /* AIF1TX6_ENA */ +#define ARIZONA_AIF1TX5_ENA 0x0010 /* AIF1TX5_ENA */ +#define ARIZONA_AIF1TX5_ENA_MASK 0x0010 /* AIF1TX5_ENA */ +#define ARIZONA_AIF1TX5_ENA_SHIFT 4 /* AIF1TX5_ENA */ +#define ARIZONA_AIF1TX5_ENA_WIDTH 1 /* AIF1TX5_ENA */ +#define ARIZONA_AIF1TX4_ENA 0x0008 /* AIF1TX4_ENA */ +#define ARIZONA_AIF1TX4_ENA_MASK 0x0008 /* AIF1TX4_ENA */ +#define ARIZONA_AIF1TX4_ENA_SHIFT 3 /* AIF1TX4_ENA */ +#define ARIZONA_AIF1TX4_ENA_WIDTH 1 /* AIF1TX4_ENA */ +#define ARIZONA_AIF1TX3_ENA 0x0004 /* AIF1TX3_ENA */ +#define ARIZONA_AIF1TX3_ENA_MASK 0x0004 /* AIF1TX3_ENA */ +#define ARIZONA_AIF1TX3_ENA_SHIFT 2 /* AIF1TX3_ENA */ +#define ARIZONA_AIF1TX3_ENA_WIDTH 1 /* AIF1TX3_ENA */ +#define ARIZONA_AIF1TX2_ENA 0x0002 /* AIF1TX2_ENA */ +#define ARIZONA_AIF1TX2_ENA_MASK 0x0002 /* AIF1TX2_ENA */ +#define ARIZONA_AIF1TX2_ENA_SHIFT 1 /* AIF1TX2_ENA */ +#define ARIZONA_AIF1TX2_ENA_WIDTH 1 /* AIF1TX2_ENA */ +#define ARIZONA_AIF1TX1_ENA 0x0001 /* AIF1TX1_ENA */ +#define ARIZONA_AIF1TX1_ENA_MASK 0x0001 /* AIF1TX1_ENA */ +#define ARIZONA_AIF1TX1_ENA_SHIFT 0 /* AIF1TX1_ENA */ +#define ARIZONA_AIF1TX1_ENA_WIDTH 1 /* AIF1TX1_ENA */ + +/* + * R1306 (0x51A) - AIF1 Rx Enables + */ +#define ARIZONA_AIF1RX8_ENA 0x0080 /* AIF1RX8_ENA */ +#define ARIZONA_AIF1RX8_ENA_MASK 0x0080 /* AIF1RX8_ENA */ +#define ARIZONA_AIF1RX8_ENA_SHIFT 7 /* AIF1RX8_ENA */ +#define ARIZONA_AIF1RX8_ENA_WIDTH 1 /* AIF1RX8_ENA */ +#define ARIZONA_AIF1RX7_ENA 0x0040 /* AIF1RX7_ENA */ +#define ARIZONA_AIF1RX7_ENA_MASK 0x0040 /* AIF1RX7_ENA */ +#define ARIZONA_AIF1RX7_ENA_SHIFT 6 /* AIF1RX7_ENA */ +#define ARIZONA_AIF1RX7_ENA_WIDTH 1 /* AIF1RX7_ENA */ +#define ARIZONA_AIF1RX6_ENA 0x0020 /* AIF1RX6_ENA */ +#define ARIZONA_AIF1RX6_ENA_MASK 0x0020 /* AIF1RX6_ENA */ +#define ARIZONA_AIF1RX6_ENA_SHIFT 5 /* AIF1RX6_ENA */ +#define ARIZONA_AIF1RX6_ENA_WIDTH 1 /* AIF1RX6_ENA */ +#define ARIZONA_AIF1RX5_ENA 0x0010 /* AIF1RX5_ENA */ +#define ARIZONA_AIF1RX5_ENA_MASK 0x0010 /* AIF1RX5_ENA */ +#define ARIZONA_AIF1RX5_ENA_SHIFT 4 /* AIF1RX5_ENA */ +#define ARIZONA_AIF1RX5_ENA_WIDTH 1 /* AIF1RX5_ENA */ +#define ARIZONA_AIF1RX4_ENA 0x0008 /* AIF1RX4_ENA */ +#define ARIZONA_AIF1RX4_ENA_MASK 0x0008 /* AIF1RX4_ENA */ +#define ARIZONA_AIF1RX4_ENA_SHIFT 3 /* AIF1RX4_ENA */ +#define ARIZONA_AIF1RX4_ENA_WIDTH 1 /* AIF1RX4_ENA */ +#define ARIZONA_AIF1RX3_ENA 0x0004 /* AIF1RX3_ENA */ +#define ARIZONA_AIF1RX3_ENA_MASK 0x0004 /* AIF1RX3_ENA */ +#define ARIZONA_AIF1RX3_ENA_SHIFT 2 /* AIF1RX3_ENA */ +#define ARIZONA_AIF1RX3_ENA_WIDTH 1 /* AIF1RX3_ENA */ +#define ARIZONA_AIF1RX2_ENA 0x0002 /* AIF1RX2_ENA */ +#define ARIZONA_AIF1RX2_ENA_MASK 0x0002 /* AIF1RX2_ENA */ +#define ARIZONA_AIF1RX2_ENA_SHIFT 1 /* AIF1RX2_ENA */ +#define ARIZONA_AIF1RX2_ENA_WIDTH 1 /* AIF1RX2_ENA */ +#define ARIZONA_AIF1RX1_ENA 0x0001 /* AIF1RX1_ENA */ +#define ARIZONA_AIF1RX1_ENA_MASK 0x0001 /* AIF1RX1_ENA */ +#define ARIZONA_AIF1RX1_ENA_SHIFT 0 /* AIF1RX1_ENA */ +#define ARIZONA_AIF1RX1_ENA_WIDTH 1 /* AIF1RX1_ENA */ + +/* + * R1307 (0x51B) - AIF1 Force Write + */ +#define ARIZONA_AIF1_FRC_WR 0x0001 /* AIF1_FRC_WR */ +#define ARIZONA_AIF1_FRC_WR_MASK 0x0001 /* AIF1_FRC_WR */ +#define ARIZONA_AIF1_FRC_WR_SHIFT 0 /* AIF1_FRC_WR */ +#define ARIZONA_AIF1_FRC_WR_WIDTH 1 /* AIF1_FRC_WR */ + +/* + * R1344 (0x540) - AIF2 BCLK Ctrl + */ +#define ARIZONA_AIF2_BCLK_INV 0x0080 /* AIF2_BCLK_INV */ +#define ARIZONA_AIF2_BCLK_INV_MASK 0x0080 /* AIF2_BCLK_INV */ +#define ARIZONA_AIF2_BCLK_INV_SHIFT 7 /* AIF2_BCLK_INV */ +#define ARIZONA_AIF2_BCLK_INV_WIDTH 1 /* AIF2_BCLK_INV */ +#define ARIZONA_AIF2_BCLK_FRC 0x0040 /* AIF2_BCLK_FRC */ +#define ARIZONA_AIF2_BCLK_FRC_MASK 0x0040 /* AIF2_BCLK_FRC */ +#define ARIZONA_AIF2_BCLK_FRC_SHIFT 6 /* AIF2_BCLK_FRC */ +#define ARIZONA_AIF2_BCLK_FRC_WIDTH 1 /* AIF2_BCLK_FRC */ +#define ARIZONA_AIF2_BCLK_MSTR 0x0020 /* AIF2_BCLK_MSTR */ +#define ARIZONA_AIF2_BCLK_MSTR_MASK 0x0020 /* AIF2_BCLK_MSTR */ +#define ARIZONA_AIF2_BCLK_MSTR_SHIFT 5 /* AIF2_BCLK_MSTR */ +#define ARIZONA_AIF2_BCLK_MSTR_WIDTH 1 /* AIF2_BCLK_MSTR */ +#define ARIZONA_AIF2_BCLK_FREQ_MASK 0x001F /* AIF2_BCLK_FREQ - [4:0] */ +#define ARIZONA_AIF2_BCLK_FREQ_SHIFT 0 /* AIF2_BCLK_FREQ - [4:0] */ +#define ARIZONA_AIF2_BCLK_FREQ_WIDTH 5 /* AIF2_BCLK_FREQ - [4:0] */ + +/* + * R1345 (0x541) - AIF2 Tx Pin Ctrl + */ +#define ARIZONA_AIF2TX_DAT_TRI 0x0020 /* AIF2TX_DAT_TRI */ +#define ARIZONA_AIF2TX_DAT_TRI_MASK 0x0020 /* AIF2TX_DAT_TRI */ +#define ARIZONA_AIF2TX_DAT_TRI_SHIFT 5 /* AIF2TX_DAT_TRI */ +#define ARIZONA_AIF2TX_DAT_TRI_WIDTH 1 /* AIF2TX_DAT_TRI */ +#define ARIZONA_AIF2TX_LRCLK_SRC 0x0008 /* AIF2TX_LRCLK_SRC */ +#define ARIZONA_AIF2TX_LRCLK_SRC_MASK 0x0008 /* AIF2TX_LRCLK_SRC */ +#define ARIZONA_AIF2TX_LRCLK_SRC_SHIFT 3 /* AIF2TX_LRCLK_SRC */ +#define ARIZONA_AIF2TX_LRCLK_SRC_WIDTH 1 /* AIF2TX_LRCLK_SRC */ +#define ARIZONA_AIF2TX_LRCLK_INV 0x0004 /* AIF2TX_LRCLK_INV */ +#define ARIZONA_AIF2TX_LRCLK_INV_MASK 0x0004 /* AIF2TX_LRCLK_INV */ +#define ARIZONA_AIF2TX_LRCLK_INV_SHIFT 2 /* AIF2TX_LRCLK_INV */ +#define ARIZONA_AIF2TX_LRCLK_INV_WIDTH 1 /* AIF2TX_LRCLK_INV */ +#define ARIZONA_AIF2TX_LRCLK_FRC 0x0002 /* AIF2TX_LRCLK_FRC */ +#define ARIZONA_AIF2TX_LRCLK_FRC_MASK 0x0002 /* AIF2TX_LRCLK_FRC */ +#define ARIZONA_AIF2TX_LRCLK_FRC_SHIFT 1 /* AIF2TX_LRCLK_FRC */ +#define ARIZONA_AIF2TX_LRCLK_FRC_WIDTH 1 /* AIF2TX_LRCLK_FRC */ +#define ARIZONA_AIF2TX_LRCLK_MSTR 0x0001 /* AIF2TX_LRCLK_MSTR */ +#define ARIZONA_AIF2TX_LRCLK_MSTR_MASK 0x0001 /* AIF2TX_LRCLK_MSTR */ +#define ARIZONA_AIF2TX_LRCLK_MSTR_SHIFT 0 /* AIF2TX_LRCLK_MSTR */ +#define ARIZONA_AIF2TX_LRCLK_MSTR_WIDTH 1 /* AIF2TX_LRCLK_MSTR */ + +/* + * R1346 (0x542) - AIF2 Rx Pin Ctrl + */ +#define ARIZONA_AIF2RX_LRCLK_INV 0x0004 /* AIF2RX_LRCLK_INV */ +#define ARIZONA_AIF2RX_LRCLK_INV_MASK 0x0004 /* AIF2RX_LRCLK_INV */ +#define ARIZONA_AIF2RX_LRCLK_INV_SHIFT 2 /* AIF2RX_LRCLK_INV */ +#define ARIZONA_AIF2RX_LRCLK_INV_WIDTH 1 /* AIF2RX_LRCLK_INV */ +#define ARIZONA_AIF2RX_LRCLK_FRC 0x0002 /* AIF2RX_LRCLK_FRC */ +#define ARIZONA_AIF2RX_LRCLK_FRC_MASK 0x0002 /* AIF2RX_LRCLK_FRC */ +#define ARIZONA_AIF2RX_LRCLK_FRC_SHIFT 1 /* AIF2RX_LRCLK_FRC */ +#define ARIZONA_AIF2RX_LRCLK_FRC_WIDTH 1 /* AIF2RX_LRCLK_FRC */ +#define ARIZONA_AIF2RX_LRCLK_MSTR 0x0001 /* AIF2RX_LRCLK_MSTR */ +#define ARIZONA_AIF2RX_LRCLK_MSTR_MASK 0x0001 /* AIF2RX_LRCLK_MSTR */ +#define ARIZONA_AIF2RX_LRCLK_MSTR_SHIFT 0 /* AIF2RX_LRCLK_MSTR */ +#define ARIZONA_AIF2RX_LRCLK_MSTR_WIDTH 1 /* AIF2RX_LRCLK_MSTR */ + +/* + * R1347 (0x543) - AIF2 Rate Ctrl + */ +#define ARIZONA_AIF2_RATE_MASK 0x7800 /* AIF2_RATE - [14:11] */ +#define ARIZONA_AIF2_RATE_SHIFT 11 /* AIF2_RATE - [14:11] */ +#define ARIZONA_AIF2_RATE_WIDTH 4 /* AIF2_RATE - [14:11] */ +#define ARIZONA_AIF2_TRI 0x0040 /* AIF2_TRI */ +#define ARIZONA_AIF2_TRI_MASK 0x0040 /* AIF2_TRI */ +#define ARIZONA_AIF2_TRI_SHIFT 6 /* AIF2_TRI */ +#define ARIZONA_AIF2_TRI_WIDTH 1 /* AIF2_TRI */ + +/* + * R1348 (0x544) - AIF2 Format + */ +#define ARIZONA_AIF2_FMT_MASK 0x0007 /* AIF2_FMT - [2:0] */ +#define ARIZONA_AIF2_FMT_SHIFT 0 /* AIF2_FMT - [2:0] */ +#define ARIZONA_AIF2_FMT_WIDTH 3 /* AIF2_FMT - [2:0] */ + +/* + * R1349 (0x545) - AIF2 Tx BCLK Rate + */ +#define ARIZONA_AIF2TX_BCPF_MASK 0x1FFF /* AIF2TX_BCPF - [12:0] */ +#define ARIZONA_AIF2TX_BCPF_SHIFT 0 /* AIF2TX_BCPF - [12:0] */ +#define ARIZONA_AIF2TX_BCPF_WIDTH 13 /* AIF2TX_BCPF - [12:0] */ + +/* + * R1350 (0x546) - AIF2 Rx BCLK Rate + */ +#define ARIZONA_AIF2RX_BCPF_MASK 0x1FFF /* AIF2RX_BCPF - [12:0] */ +#define ARIZONA_AIF2RX_BCPF_SHIFT 0 /* AIF2RX_BCPF - [12:0] */ +#define ARIZONA_AIF2RX_BCPF_WIDTH 13 /* AIF2RX_BCPF - [12:0] */ + +/* + * R1351 (0x547) - AIF2 Frame Ctrl 1 + */ +#define ARIZONA_AIF2TX_WL_MASK 0x3F00 /* AIF2TX_WL - [13:8] */ +#define ARIZONA_AIF2TX_WL_SHIFT 8 /* AIF2TX_WL - [13:8] */ +#define ARIZONA_AIF2TX_WL_WIDTH 6 /* AIF2TX_WL - [13:8] */ +#define ARIZONA_AIF2TX_SLOT_LEN_MASK 0x00FF /* AIF2TX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF2TX_SLOT_LEN_SHIFT 0 /* AIF2TX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF2TX_SLOT_LEN_WIDTH 8 /* AIF2TX_SLOT_LEN - [7:0] */ + +/* + * R1352 (0x548) - AIF2 Frame Ctrl 2 + */ +#define ARIZONA_AIF2RX_WL_MASK 0x3F00 /* AIF2RX_WL - [13:8] */ +#define ARIZONA_AIF2RX_WL_SHIFT 8 /* AIF2RX_WL - [13:8] */ +#define ARIZONA_AIF2RX_WL_WIDTH 6 /* AIF2RX_WL - [13:8] */ +#define ARIZONA_AIF2RX_SLOT_LEN_MASK 0x00FF /* AIF2RX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF2RX_SLOT_LEN_SHIFT 0 /* AIF2RX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF2RX_SLOT_LEN_WIDTH 8 /* AIF2RX_SLOT_LEN - [7:0] */ + +/* + * R1353 (0x549) - AIF2 Frame Ctrl 3 + */ +#define ARIZONA_AIF2TX1_SLOT_MASK 0x003F /* AIF2TX1_SLOT - [5:0] */ +#define ARIZONA_AIF2TX1_SLOT_SHIFT 0 /* AIF2TX1_SLOT - [5:0] */ +#define ARIZONA_AIF2TX1_SLOT_WIDTH 6 /* AIF2TX1_SLOT - [5:0] */ + +/* + * R1354 (0x54A) - AIF2 Frame Ctrl 4 + */ +#define ARIZONA_AIF2TX2_SLOT_MASK 0x003F /* AIF2TX2_SLOT - [5:0] */ +#define ARIZONA_AIF2TX2_SLOT_SHIFT 0 /* AIF2TX2_SLOT - [5:0] */ +#define ARIZONA_AIF2TX2_SLOT_WIDTH 6 /* AIF2TX2_SLOT - [5:0] */ + +/* + * R1361 (0x551) - AIF2 Frame Ctrl 11 + */ +#define ARIZONA_AIF2RX1_SLOT_MASK 0x003F /* AIF2RX1_SLOT - [5:0] */ +#define ARIZONA_AIF2RX1_SLOT_SHIFT 0 /* AIF2RX1_SLOT - [5:0] */ +#define ARIZONA_AIF2RX1_SLOT_WIDTH 6 /* AIF2RX1_SLOT - [5:0] */ + +/* + * R1362 (0x552) - AIF2 Frame Ctrl 12 + */ +#define ARIZONA_AIF2RX2_SLOT_MASK 0x003F /* AIF2RX2_SLOT - [5:0] */ +#define ARIZONA_AIF2RX2_SLOT_SHIFT 0 /* AIF2RX2_SLOT - [5:0] */ +#define ARIZONA_AIF2RX2_SLOT_WIDTH 6 /* AIF2RX2_SLOT - [5:0] */ + +/* + * R1369 (0x559) - AIF2 Tx Enables + */ +#define ARIZONA_AIF2TX2_ENA 0x0002 /* AIF2TX2_ENA */ +#define ARIZONA_AIF2TX2_ENA_MASK 0x0002 /* AIF2TX2_ENA */ +#define ARIZONA_AIF2TX2_ENA_SHIFT 1 /* AIF2TX2_ENA */ +#define ARIZONA_AIF2TX2_ENA_WIDTH 1 /* AIF2TX2_ENA */ +#define ARIZONA_AIF2TX1_ENA 0x0001 /* AIF2TX1_ENA */ +#define ARIZONA_AIF2TX1_ENA_MASK 0x0001 /* AIF2TX1_ENA */ +#define ARIZONA_AIF2TX1_ENA_SHIFT 0 /* AIF2TX1_ENA */ +#define ARIZONA_AIF2TX1_ENA_WIDTH 1 /* AIF2TX1_ENA */ + +/* + * R1370 (0x55A) - AIF2 Rx Enables + */ +#define ARIZONA_AIF2RX2_ENA 0x0002 /* AIF2RX2_ENA */ +#define ARIZONA_AIF2RX2_ENA_MASK 0x0002 /* AIF2RX2_ENA */ +#define ARIZONA_AIF2RX2_ENA_SHIFT 1 /* AIF2RX2_ENA */ +#define ARIZONA_AIF2RX2_ENA_WIDTH 1 /* AIF2RX2_ENA */ +#define ARIZONA_AIF2RX1_ENA 0x0001 /* AIF2RX1_ENA */ +#define ARIZONA_AIF2RX1_ENA_MASK 0x0001 /* AIF2RX1_ENA */ +#define ARIZONA_AIF2RX1_ENA_SHIFT 0 /* AIF2RX1_ENA */ +#define ARIZONA_AIF2RX1_ENA_WIDTH 1 /* AIF2RX1_ENA */ + +/* + * R1371 (0x55B) - AIF2 Force Write + */ +#define ARIZONA_AIF2_FRC_WR 0x0001 /* AIF2_FRC_WR */ +#define ARIZONA_AIF2_FRC_WR_MASK 0x0001 /* AIF2_FRC_WR */ +#define ARIZONA_AIF2_FRC_WR_SHIFT 0 /* AIF2_FRC_WR */ +#define ARIZONA_AIF2_FRC_WR_WIDTH 1 /* AIF2_FRC_WR */ + +/* + * R1408 (0x580) - AIF3 BCLK Ctrl + */ +#define ARIZONA_AIF3_BCLK_INV 0x0080 /* AIF3_BCLK_INV */ +#define ARIZONA_AIF3_BCLK_INV_MASK 0x0080 /* AIF3_BCLK_INV */ +#define ARIZONA_AIF3_BCLK_INV_SHIFT 7 /* AIF3_BCLK_INV */ +#define ARIZONA_AIF3_BCLK_INV_WIDTH 1 /* AIF3_BCLK_INV */ +#define ARIZONA_AIF3_BCLK_FRC 0x0040 /* AIF3_BCLK_FRC */ +#define ARIZONA_AIF3_BCLK_FRC_MASK 0x0040 /* AIF3_BCLK_FRC */ +#define ARIZONA_AIF3_BCLK_FRC_SHIFT 6 /* AIF3_BCLK_FRC */ +#define ARIZONA_AIF3_BCLK_FRC_WIDTH 1 /* AIF3_BCLK_FRC */ +#define ARIZONA_AIF3_BCLK_MSTR 0x0020 /* AIF3_BCLK_MSTR */ +#define ARIZONA_AIF3_BCLK_MSTR_MASK 0x0020 /* AIF3_BCLK_MSTR */ +#define ARIZONA_AIF3_BCLK_MSTR_SHIFT 5 /* AIF3_BCLK_MSTR */ +#define ARIZONA_AIF3_BCLK_MSTR_WIDTH 1 /* AIF3_BCLK_MSTR */ +#define ARIZONA_AIF3_BCLK_FREQ_MASK 0x001F /* AIF3_BCLK_FREQ - [4:0] */ +#define ARIZONA_AIF3_BCLK_FREQ_SHIFT 0 /* AIF3_BCLK_FREQ - [4:0] */ +#define ARIZONA_AIF3_BCLK_FREQ_WIDTH 5 /* AIF3_BCLK_FREQ - [4:0] */ + +/* + * R1409 (0x581) - AIF3 Tx Pin Ctrl + */ +#define ARIZONA_AIF3TX_DAT_TRI 0x0020 /* AIF3TX_DAT_TRI */ +#define ARIZONA_AIF3TX_DAT_TRI_MASK 0x0020 /* AIF3TX_DAT_TRI */ +#define ARIZONA_AIF3TX_DAT_TRI_SHIFT 5 /* AIF3TX_DAT_TRI */ +#define ARIZONA_AIF3TX_DAT_TRI_WIDTH 1 /* AIF3TX_DAT_TRI */ +#define ARIZONA_AIF3TX_LRCLK_SRC 0x0008 /* AIF3TX_LRCLK_SRC */ +#define ARIZONA_AIF3TX_LRCLK_SRC_MASK 0x0008 /* AIF3TX_LRCLK_SRC */ +#define ARIZONA_AIF3TX_LRCLK_SRC_SHIFT 3 /* AIF3TX_LRCLK_SRC */ +#define ARIZONA_AIF3TX_LRCLK_SRC_WIDTH 1 /* AIF3TX_LRCLK_SRC */ +#define ARIZONA_AIF3TX_LRCLK_INV 0x0004 /* AIF3TX_LRCLK_INV */ +#define ARIZONA_AIF3TX_LRCLK_INV_MASK 0x0004 /* AIF3TX_LRCLK_INV */ +#define ARIZONA_AIF3TX_LRCLK_INV_SHIFT 2 /* AIF3TX_LRCLK_INV */ +#define ARIZONA_AIF3TX_LRCLK_INV_WIDTH 1 /* AIF3TX_LRCLK_INV */ +#define ARIZONA_AIF3TX_LRCLK_FRC 0x0002 /* AIF3TX_LRCLK_FRC */ +#define ARIZONA_AIF3TX_LRCLK_FRC_MASK 0x0002 /* AIF3TX_LRCLK_FRC */ +#define ARIZONA_AIF3TX_LRCLK_FRC_SHIFT 1 /* AIF3TX_LRCLK_FRC */ +#define ARIZONA_AIF3TX_LRCLK_FRC_WIDTH 1 /* AIF3TX_LRCLK_FRC */ +#define ARIZONA_AIF3TX_LRCLK_MSTR 0x0001 /* AIF3TX_LRCLK_MSTR */ +#define ARIZONA_AIF3TX_LRCLK_MSTR_MASK 0x0001 /* AIF3TX_LRCLK_MSTR */ +#define ARIZONA_AIF3TX_LRCLK_MSTR_SHIFT 0 /* AIF3TX_LRCLK_MSTR */ +#define ARIZONA_AIF3TX_LRCLK_MSTR_WIDTH 1 /* AIF3TX_LRCLK_MSTR */ + +/* + * R1410 (0x582) - AIF3 Rx Pin Ctrl + */ +#define ARIZONA_AIF3RX_LRCLK_INV 0x0004 /* AIF3RX_LRCLK_INV */ +#define ARIZONA_AIF3RX_LRCLK_INV_MASK 0x0004 /* AIF3RX_LRCLK_INV */ +#define ARIZONA_AIF3RX_LRCLK_INV_SHIFT 2 /* AIF3RX_LRCLK_INV */ +#define ARIZONA_AIF3RX_LRCLK_INV_WIDTH 1 /* AIF3RX_LRCLK_INV */ +#define ARIZONA_AIF3RX_LRCLK_FRC 0x0002 /* AIF3RX_LRCLK_FRC */ +#define ARIZONA_AIF3RX_LRCLK_FRC_MASK 0x0002 /* AIF3RX_LRCLK_FRC */ +#define ARIZONA_AIF3RX_LRCLK_FRC_SHIFT 1 /* AIF3RX_LRCLK_FRC */ +#define ARIZONA_AIF3RX_LRCLK_FRC_WIDTH 1 /* AIF3RX_LRCLK_FRC */ +#define ARIZONA_AIF3RX_LRCLK_MSTR 0x0001 /* AIF3RX_LRCLK_MSTR */ +#define ARIZONA_AIF3RX_LRCLK_MSTR_MASK 0x0001 /* AIF3RX_LRCLK_MSTR */ +#define ARIZONA_AIF3RX_LRCLK_MSTR_SHIFT 0 /* AIF3RX_LRCLK_MSTR */ +#define ARIZONA_AIF3RX_LRCLK_MSTR_WIDTH 1 /* AIF3RX_LRCLK_MSTR */ + +/* + * R1411 (0x583) - AIF3 Rate Ctrl + */ +#define ARIZONA_AIF3_RATE_MASK 0x7800 /* AIF3_RATE - [14:11] */ +#define ARIZONA_AIF3_RATE_SHIFT 11 /* AIF3_RATE - [14:11] */ +#define ARIZONA_AIF3_RATE_WIDTH 4 /* AIF3_RATE - [14:11] */ +#define ARIZONA_AIF3_TRI 0x0040 /* AIF3_TRI */ +#define ARIZONA_AIF3_TRI_MASK 0x0040 /* AIF3_TRI */ +#define ARIZONA_AIF3_TRI_SHIFT 6 /* AIF3_TRI */ +#define ARIZONA_AIF3_TRI_WIDTH 1 /* AIF3_TRI */ + +/* + * R1412 (0x584) - AIF3 Format + */ +#define ARIZONA_AIF3_FMT_MASK 0x0007 /* AIF3_FMT - [2:0] */ +#define ARIZONA_AIF3_FMT_SHIFT 0 /* AIF3_FMT - [2:0] */ +#define ARIZONA_AIF3_FMT_WIDTH 3 /* AIF3_FMT - [2:0] */ + +/* + * R1413 (0x585) - AIF3 Tx BCLK Rate + */ +#define ARIZONA_AIF3TX_BCPF_MASK 0x1FFF /* AIF3TX_BCPF - [12:0] */ +#define ARIZONA_AIF3TX_BCPF_SHIFT 0 /* AIF3TX_BCPF - [12:0] */ +#define ARIZONA_AIF3TX_BCPF_WIDTH 13 /* AIF3TX_BCPF - [12:0] */ + +/* + * R1414 (0x586) - AIF3 Rx BCLK Rate + */ +#define ARIZONA_AIF3RX_BCPF_MASK 0x1FFF /* AIF3RX_BCPF - [12:0] */ +#define ARIZONA_AIF3RX_BCPF_SHIFT 0 /* AIF3RX_BCPF - [12:0] */ +#define ARIZONA_AIF3RX_BCPF_WIDTH 13 /* AIF3RX_BCPF - [12:0] */ + +/* + * R1415 (0x587) - AIF3 Frame Ctrl 1 + */ +#define ARIZONA_AIF3TX_WL_MASK 0x3F00 /* AIF3TX_WL - [13:8] */ +#define ARIZONA_AIF3TX_WL_SHIFT 8 /* AIF3TX_WL - [13:8] */ +#define ARIZONA_AIF3TX_WL_WIDTH 6 /* AIF3TX_WL - [13:8] */ +#define ARIZONA_AIF3TX_SLOT_LEN_MASK 0x00FF /* AIF3TX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF3TX_SLOT_LEN_SHIFT 0 /* AIF3TX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF3TX_SLOT_LEN_WIDTH 8 /* AIF3TX_SLOT_LEN - [7:0] */ + +/* + * R1416 (0x588) - AIF3 Frame Ctrl 2 + */ +#define ARIZONA_AIF3RX_WL_MASK 0x3F00 /* AIF3RX_WL - [13:8] */ +#define ARIZONA_AIF3RX_WL_SHIFT 8 /* AIF3RX_WL - [13:8] */ +#define ARIZONA_AIF3RX_WL_WIDTH 6 /* AIF3RX_WL - [13:8] */ +#define ARIZONA_AIF3RX_SLOT_LEN_MASK 0x00FF /* AIF3RX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF3RX_SLOT_LEN_SHIFT 0 /* AIF3RX_SLOT_LEN - [7:0] */ +#define ARIZONA_AIF3RX_SLOT_LEN_WIDTH 8 /* AIF3RX_SLOT_LEN - [7:0] */ + +/* + * R1417 (0x589) - AIF3 Frame Ctrl 3 + */ +#define ARIZONA_AIF3TX1_SLOT_MASK 0x003F /* AIF3TX1_SLOT - [5:0] */ +#define ARIZONA_AIF3TX1_SLOT_SHIFT 0 /* AIF3TX1_SLOT - [5:0] */ +#define ARIZONA_AIF3TX1_SLOT_WIDTH 6 /* AIF3TX1_SLOT - [5:0] */ + +/* + * R1418 (0x58A) - AIF3 Frame Ctrl 4 + */ +#define ARIZONA_AIF3TX2_SLOT_MASK 0x003F /* AIF3TX2_SLOT - [5:0] */ +#define ARIZONA_AIF3TX2_SLOT_SHIFT 0 /* AIF3TX2_SLOT - [5:0] */ +#define ARIZONA_AIF3TX2_SLOT_WIDTH 6 /* AIF3TX2_SLOT - [5:0] */ + +/* + * R1425 (0x591) - AIF3 Frame Ctrl 11 + */ +#define ARIZONA_AIF3RX1_SLOT_MASK 0x003F /* AIF3RX1_SLOT - [5:0] */ +#define ARIZONA_AIF3RX1_SLOT_SHIFT 0 /* AIF3RX1_SLOT - [5:0] */ +#define ARIZONA_AIF3RX1_SLOT_WIDTH 6 /* AIF3RX1_SLOT - [5:0] */ + +/* + * R1426 (0x592) - AIF3 Frame Ctrl 12 + */ +#define ARIZONA_AIF3RX2_SLOT_MASK 0x003F /* AIF3RX2_SLOT - [5:0] */ +#define ARIZONA_AIF3RX2_SLOT_SHIFT 0 /* AIF3RX2_SLOT - [5:0] */ +#define ARIZONA_AIF3RX2_SLOT_WIDTH 6 /* AIF3RX2_SLOT - [5:0] */ + +/* + * R1433 (0x599) - AIF3 Tx Enables + */ +#define ARIZONA_AIF3TX2_ENA 0x0002 /* AIF3TX2_ENA */ +#define ARIZONA_AIF3TX2_ENA_MASK 0x0002 /* AIF3TX2_ENA */ +#define ARIZONA_AIF3TX2_ENA_SHIFT 1 /* AIF3TX2_ENA */ +#define ARIZONA_AIF3TX2_ENA_WIDTH 1 /* AIF3TX2_ENA */ +#define ARIZONA_AIF3TX1_ENA 0x0001 /* AIF3TX1_ENA */ +#define ARIZONA_AIF3TX1_ENA_MASK 0x0001 /* AIF3TX1_ENA */ +#define ARIZONA_AIF3TX1_ENA_SHIFT 0 /* AIF3TX1_ENA */ +#define ARIZONA_AIF3TX1_ENA_WIDTH 1 /* AIF3TX1_ENA */ + +/* + * R1434 (0x59A) - AIF3 Rx Enables + */ +#define ARIZONA_AIF3RX2_ENA 0x0002 /* AIF3RX2_ENA */ +#define ARIZONA_AIF3RX2_ENA_MASK 0x0002 /* AIF3RX2_ENA */ +#define ARIZONA_AIF3RX2_ENA_SHIFT 1 /* AIF3RX2_ENA */ +#define ARIZONA_AIF3RX2_ENA_WIDTH 1 /* AIF3RX2_ENA */ +#define ARIZONA_AIF3RX1_ENA 0x0001 /* AIF3RX1_ENA */ +#define ARIZONA_AIF3RX1_ENA_MASK 0x0001 /* AIF3RX1_ENA */ +#define ARIZONA_AIF3RX1_ENA_SHIFT 0 /* AIF3RX1_ENA */ +#define ARIZONA_AIF3RX1_ENA_WIDTH 1 /* AIF3RX1_ENA */ + +/* + * R1435 (0x59B) - AIF3 Force Write + */ +#define ARIZONA_AIF3_FRC_WR 0x0001 /* AIF3_FRC_WR */ +#define ARIZONA_AIF3_FRC_WR_MASK 0x0001 /* AIF3_FRC_WR */ +#define ARIZONA_AIF3_FRC_WR_SHIFT 0 /* AIF3_FRC_WR */ +#define ARIZONA_AIF3_FRC_WR_WIDTH 1 /* AIF3_FRC_WR */ + +/* + * R1507 (0x5E3) - SLIMbus Framer Ref Gear + */ +#define ARIZONA_SLIMCLK_SRC 0x0010 /* SLIMCLK_SRC */ +#define ARIZONA_SLIMCLK_SRC_MASK 0x0010 /* SLIMCLK_SRC */ +#define ARIZONA_SLIMCLK_SRC_SHIFT 4 /* SLIMCLK_SRC */ +#define ARIZONA_SLIMCLK_SRC_WIDTH 1 /* SLIMCLK_SRC */ +#define ARIZONA_FRAMER_REF_GEAR_MASK 0x000F /* FRAMER_REF_GEAR - [3:0] */ +#define ARIZONA_FRAMER_REF_GEAR_SHIFT 0 /* FRAMER_REF_GEAR - [3:0] */ +#define ARIZONA_FRAMER_REF_GEAR_WIDTH 4 /* FRAMER_REF_GEAR - [3:0] */ + +/* + * R1509 (0x5E5) - SLIMbus Rates 1 + */ +#define ARIZONA_SLIMRX2_RATE_MASK 0x7800 /* SLIMRX2_RATE - [14:11] */ +#define ARIZONA_SLIMRX2_RATE_SHIFT 11 /* SLIMRX2_RATE - [14:11] */ +#define ARIZONA_SLIMRX2_RATE_WIDTH 4 /* SLIMRX2_RATE - [14:11] */ +#define ARIZONA_SLIMRX1_RATE_MASK 0x0078 /* SLIMRX1_RATE - [6:3] */ +#define ARIZONA_SLIMRX1_RATE_SHIFT 3 /* SLIMRX1_RATE - [6:3] */ +#define ARIZONA_SLIMRX1_RATE_WIDTH 4 /* SLIMRX1_RATE - [6:3] */ + +/* + * R1510 (0x5E6) - SLIMbus Rates 2 + */ +#define ARIZONA_SLIMRX4_RATE_MASK 0x7800 /* SLIMRX4_RATE - [14:11] */ +#define ARIZONA_SLIMRX4_RATE_SHIFT 11 /* SLIMRX4_RATE - [14:11] */ +#define ARIZONA_SLIMRX4_RATE_WIDTH 4 /* SLIMRX4_RATE - [14:11] */ +#define ARIZONA_SLIMRX3_RATE_MASK 0x0078 /* SLIMRX3_RATE - [6:3] */ +#define ARIZONA_SLIMRX3_RATE_SHIFT 3 /* SLIMRX3_RATE - [6:3] */ +#define ARIZONA_SLIMRX3_RATE_WIDTH 4 /* SLIMRX3_RATE - [6:3] */ + +/* + * R1511 (0x5E7) - SLIMbus Rates 3 + */ +#define ARIZONA_SLIMRX6_RATE_MASK 0x7800 /* SLIMRX6_RATE - [14:11] */ +#define ARIZONA_SLIMRX6_RATE_SHIFT 11 /* SLIMRX6_RATE - [14:11] */ +#define ARIZONA_SLIMRX6_RATE_WIDTH 4 /* SLIMRX6_RATE - [14:11] */ +#define ARIZONA_SLIMRX5_RATE_MASK 0x0078 /* SLIMRX5_RATE - [6:3] */ +#define ARIZONA_SLIMRX5_RATE_SHIFT 3 /* SLIMRX5_RATE - [6:3] */ +#define ARIZONA_SLIMRX5_RATE_WIDTH 4 /* SLIMRX5_RATE - [6:3] */ + +/* + * R1512 (0x5E8) - SLIMbus Rates 4 + */ +#define ARIZONA_SLIMRX8_RATE_MASK 0x7800 /* SLIMRX8_RATE - [14:11] */ +#define ARIZONA_SLIMRX8_RATE_SHIFT 11 /* SLIMRX8_RATE - [14:11] */ +#define ARIZONA_SLIMRX8_RATE_WIDTH 4 /* SLIMRX8_RATE - [14:11] */ +#define ARIZONA_SLIMRX7_RATE_MASK 0x0078 /* SLIMRX7_RATE - [6:3] */ +#define ARIZONA_SLIMRX7_RATE_SHIFT 3 /* SLIMRX7_RATE - [6:3] */ +#define ARIZONA_SLIMRX7_RATE_WIDTH 4 /* SLIMRX7_RATE - [6:3] */ + +/* + * R1513 (0x5E9) - SLIMbus Rates 5 + */ +#define ARIZONA_SLIMTX2_RATE_MASK 0x7800 /* SLIMTX2_RATE - [14:11] */ +#define ARIZONA_SLIMTX2_RATE_SHIFT 11 /* SLIMTX2_RATE - [14:11] */ +#define ARIZONA_SLIMTX2_RATE_WIDTH 4 /* SLIMTX2_RATE - [14:11] */ +#define ARIZONA_SLIMTX1_RATE_MASK 0x0078 /* SLIMTX1_RATE - [6:3] */ +#define ARIZONA_SLIMTX1_RATE_SHIFT 3 /* SLIMTX1_RATE - [6:3] */ +#define ARIZONA_SLIMTX1_RATE_WIDTH 4 /* SLIMTX1_RATE - [6:3] */ + +/* + * R1514 (0x5EA) - SLIMbus Rates 6 + */ +#define ARIZONA_SLIMTX4_RATE_MASK 0x7800 /* SLIMTX4_RATE - [14:11] */ +#define ARIZONA_SLIMTX4_RATE_SHIFT 11 /* SLIMTX4_RATE - [14:11] */ +#define ARIZONA_SLIMTX4_RATE_WIDTH 4 /* SLIMTX4_RATE - [14:11] */ +#define ARIZONA_SLIMTX3_RATE_MASK 0x0078 /* SLIMTX3_RATE - [6:3] */ +#define ARIZONA_SLIMTX3_RATE_SHIFT 3 /* SLIMTX3_RATE - [6:3] */ +#define ARIZONA_SLIMTX3_RATE_WIDTH 4 /* SLIMTX3_RATE - [6:3] */ + +/* + * R1515 (0x5EB) - SLIMbus Rates 7 + */ +#define ARIZONA_SLIMTX6_RATE_MASK 0x7800 /* SLIMTX6_RATE - [14:11] */ +#define ARIZONA_SLIMTX6_RATE_SHIFT 11 /* SLIMTX6_RATE - [14:11] */ +#define ARIZONA_SLIMTX6_RATE_WIDTH 4 /* SLIMTX6_RATE - [14:11] */ +#define ARIZONA_SLIMTX5_RATE_MASK 0x0078 /* SLIMTX5_RATE - [6:3] */ +#define ARIZONA_SLIMTX5_RATE_SHIFT 3 /* SLIMTX5_RATE - [6:3] */ +#define ARIZONA_SLIMTX5_RATE_WIDTH 4 /* SLIMTX5_RATE - [6:3] */ + +/* + * R1516 (0x5EC) - SLIMbus Rates 8 + */ +#define ARIZONA_SLIMTX8_RATE_MASK 0x7800 /* SLIMTX8_RATE - [14:11] */ +#define ARIZONA_SLIMTX8_RATE_SHIFT 11 /* SLIMTX8_RATE - [14:11] */ +#define ARIZONA_SLIMTX8_RATE_WIDTH 4 /* SLIMTX8_RATE - [14:11] */ +#define ARIZONA_SLIMTX7_RATE_MASK 0x0078 /* SLIMTX7_RATE - [6:3] */ +#define ARIZONA_SLIMTX7_RATE_SHIFT 3 /* SLIMTX7_RATE - [6:3] */ +#define ARIZONA_SLIMTX7_RATE_WIDTH 4 /* SLIMTX7_RATE - [6:3] */ + +/* + * R1525 (0x5F5) - SLIMbus RX Channel Enable + */ +#define ARIZONA_SLIMRX8_ENA 0x0080 /* SLIMRX8_ENA */ +#define ARIZONA_SLIMRX8_ENA_MASK 0x0080 /* SLIMRX8_ENA */ +#define ARIZONA_SLIMRX8_ENA_SHIFT 7 /* SLIMRX8_ENA */ +#define ARIZONA_SLIMRX8_ENA_WIDTH 1 /* SLIMRX8_ENA */ +#define ARIZONA_SLIMRX7_ENA 0x0040 /* SLIMRX7_ENA */ +#define ARIZONA_SLIMRX7_ENA_MASK 0x0040 /* SLIMRX7_ENA */ +#define ARIZONA_SLIMRX7_ENA_SHIFT 6 /* SLIMRX7_ENA */ +#define ARIZONA_SLIMRX7_ENA_WIDTH 1 /* SLIMRX7_ENA */ +#define ARIZONA_SLIMRX6_ENA 0x0020 /* SLIMRX6_ENA */ +#define ARIZONA_SLIMRX6_ENA_MASK 0x0020 /* SLIMRX6_ENA */ +#define ARIZONA_SLIMRX6_ENA_SHIFT 5 /* SLIMRX6_ENA */ +#define ARIZONA_SLIMRX6_ENA_WIDTH 1 /* SLIMRX6_ENA */ +#define ARIZONA_SLIMRX5_ENA 0x0010 /* SLIMRX5_ENA */ +#define ARIZONA_SLIMRX5_ENA_MASK 0x0010 /* SLIMRX5_ENA */ +#define ARIZONA_SLIMRX5_ENA_SHIFT 4 /* SLIMRX5_ENA */ +#define ARIZONA_SLIMRX5_ENA_WIDTH 1 /* SLIMRX5_ENA */ +#define ARIZONA_SLIMRX4_ENA 0x0008 /* SLIMRX4_ENA */ +#define ARIZONA_SLIMRX4_ENA_MASK 0x0008 /* SLIMRX4_ENA */ +#define ARIZONA_SLIMRX4_ENA_SHIFT 3 /* SLIMRX4_ENA */ +#define ARIZONA_SLIMRX4_ENA_WIDTH 1 /* SLIMRX4_ENA */ +#define ARIZONA_SLIMRX3_ENA 0x0004 /* SLIMRX3_ENA */ +#define ARIZONA_SLIMRX3_ENA_MASK 0x0004 /* SLIMRX3_ENA */ +#define ARIZONA_SLIMRX3_ENA_SHIFT 2 /* SLIMRX3_ENA */ +#define ARIZONA_SLIMRX3_ENA_WIDTH 1 /* SLIMRX3_ENA */ +#define ARIZONA_SLIMRX2_ENA 0x0002 /* SLIMRX2_ENA */ +#define ARIZONA_SLIMRX2_ENA_MASK 0x0002 /* SLIMRX2_ENA */ +#define ARIZONA_SLIMRX2_ENA_SHIFT 1 /* SLIMRX2_ENA */ +#define ARIZONA_SLIMRX2_ENA_WIDTH 1 /* SLIMRX2_ENA */ +#define ARIZONA_SLIMRX1_ENA 0x0001 /* SLIMRX1_ENA */ +#define ARIZONA_SLIMRX1_ENA_MASK 0x0001 /* SLIMRX1_ENA */ +#define ARIZONA_SLIMRX1_ENA_SHIFT 0 /* SLIMRX1_ENA */ +#define ARIZONA_SLIMRX1_ENA_WIDTH 1 /* SLIMRX1_ENA */ + +/* + * R1526 (0x5F6) - SLIMbus TX Channel Enable + */ +#define ARIZONA_SLIMTX8_ENA 0x0080 /* SLIMTX8_ENA */ +#define ARIZONA_SLIMTX8_ENA_MASK 0x0080 /* SLIMTX8_ENA */ +#define ARIZONA_SLIMTX8_ENA_SHIFT 7 /* SLIMTX8_ENA */ +#define ARIZONA_SLIMTX8_ENA_WIDTH 1 /* SLIMTX8_ENA */ +#define ARIZONA_SLIMTX7_ENA 0x0040 /* SLIMTX7_ENA */ +#define ARIZONA_SLIMTX7_ENA_MASK 0x0040 /* SLIMTX7_ENA */ +#define ARIZONA_SLIMTX7_ENA_SHIFT 6 /* SLIMTX7_ENA */ +#define ARIZONA_SLIMTX7_ENA_WIDTH 1 /* SLIMTX7_ENA */ +#define ARIZONA_SLIMTX6_ENA 0x0020 /* SLIMTX6_ENA */ +#define ARIZONA_SLIMTX6_ENA_MASK 0x0020 /* SLIMTX6_ENA */ +#define ARIZONA_SLIMTX6_ENA_SHIFT 5 /* SLIMTX6_ENA */ +#define ARIZONA_SLIMTX6_ENA_WIDTH 1 /* SLIMTX6_ENA */ +#define ARIZONA_SLIMTX5_ENA 0x0010 /* SLIMTX5_ENA */ +#define ARIZONA_SLIMTX5_ENA_MASK 0x0010 /* SLIMTX5_ENA */ +#define ARIZONA_SLIMTX5_ENA_SHIFT 4 /* SLIMTX5_ENA */ +#define ARIZONA_SLIMTX5_ENA_WIDTH 1 /* SLIMTX5_ENA */ +#define ARIZONA_SLIMTX4_ENA 0x0008 /* SLIMTX4_ENA */ +#define ARIZONA_SLIMTX4_ENA_MASK 0x0008 /* SLIMTX4_ENA */ +#define ARIZONA_SLIMTX4_ENA_SHIFT 3 /* SLIMTX4_ENA */ +#define ARIZONA_SLIMTX4_ENA_WIDTH 1 /* SLIMTX4_ENA */ +#define ARIZONA_SLIMTX3_ENA 0x0004 /* SLIMTX3_ENA */ +#define ARIZONA_SLIMTX3_ENA_MASK 0x0004 /* SLIMTX3_ENA */ +#define ARIZONA_SLIMTX3_ENA_SHIFT 2 /* SLIMTX3_ENA */ +#define ARIZONA_SLIMTX3_ENA_WIDTH 1 /* SLIMTX3_ENA */ +#define ARIZONA_SLIMTX2_ENA 0x0002 /* SLIMTX2_ENA */ +#define ARIZONA_SLIMTX2_ENA_MASK 0x0002 /* SLIMTX2_ENA */ +#define ARIZONA_SLIMTX2_ENA_SHIFT 1 /* SLIMTX2_ENA */ +#define ARIZONA_SLIMTX2_ENA_WIDTH 1 /* SLIMTX2_ENA */ +#define ARIZONA_SLIMTX1_ENA 0x0001 /* SLIMTX1_ENA */ +#define ARIZONA_SLIMTX1_ENA_MASK 0x0001 /* SLIMTX1_ENA */ +#define ARIZONA_SLIMTX1_ENA_SHIFT 0 /* SLIMTX1_ENA */ +#define ARIZONA_SLIMTX1_ENA_WIDTH 1 /* SLIMTX1_ENA */ + +/* + * R1527 (0x5F7) - SLIMbus RX Port Status + */ +#define ARIZONA_SLIMRX8_PORT_STS 0x0080 /* SLIMRX8_PORT_STS */ +#define ARIZONA_SLIMRX8_PORT_STS_MASK 0x0080 /* SLIMRX8_PORT_STS */ +#define ARIZONA_SLIMRX8_PORT_STS_SHIFT 7 /* SLIMRX8_PORT_STS */ +#define ARIZONA_SLIMRX8_PORT_STS_WIDTH 1 /* SLIMRX8_PORT_STS */ +#define ARIZONA_SLIMRX7_PORT_STS 0x0040 /* SLIMRX7_PORT_STS */ +#define ARIZONA_SLIMRX7_PORT_STS_MASK 0x0040 /* SLIMRX7_PORT_STS */ +#define ARIZONA_SLIMRX7_PORT_STS_SHIFT 6 /* SLIMRX7_PORT_STS */ +#define ARIZONA_SLIMRX7_PORT_STS_WIDTH 1 /* SLIMRX7_PORT_STS */ +#define ARIZONA_SLIMRX6_PORT_STS 0x0020 /* SLIMRX6_PORT_STS */ +#define ARIZONA_SLIMRX6_PORT_STS_MASK 0x0020 /* SLIMRX6_PORT_STS */ +#define ARIZONA_SLIMRX6_PORT_STS_SHIFT 5 /* SLIMRX6_PORT_STS */ +#define ARIZONA_SLIMRX6_PORT_STS_WIDTH 1 /* SLIMRX6_PORT_STS */ +#define ARIZONA_SLIMRX5_PORT_STS 0x0010 /* SLIMRX5_PORT_STS */ +#define ARIZONA_SLIMRX5_PORT_STS_MASK 0x0010 /* SLIMRX5_PORT_STS */ +#define ARIZONA_SLIMRX5_PORT_STS_SHIFT 4 /* SLIMRX5_PORT_STS */ +#define ARIZONA_SLIMRX5_PORT_STS_WIDTH 1 /* SLIMRX5_PORT_STS */ +#define ARIZONA_SLIMRX4_PORT_STS 0x0008 /* SLIMRX4_PORT_STS */ +#define ARIZONA_SLIMRX4_PORT_STS_MASK 0x0008 /* SLIMRX4_PORT_STS */ +#define ARIZONA_SLIMRX4_PORT_STS_SHIFT 3 /* SLIMRX4_PORT_STS */ +#define ARIZONA_SLIMRX4_PORT_STS_WIDTH 1 /* SLIMRX4_PORT_STS */ +#define ARIZONA_SLIMRX3_PORT_STS 0x0004 /* SLIMRX3_PORT_STS */ +#define ARIZONA_SLIMRX3_PORT_STS_MASK 0x0004 /* SLIMRX3_PORT_STS */ +#define ARIZONA_SLIMRX3_PORT_STS_SHIFT 2 /* SLIMRX3_PORT_STS */ +#define ARIZONA_SLIMRX3_PORT_STS_WIDTH 1 /* SLIMRX3_PORT_STS */ +#define ARIZONA_SLIMRX2_PORT_STS 0x0002 /* SLIMRX2_PORT_STS */ +#define ARIZONA_SLIMRX2_PORT_STS_MASK 0x0002 /* SLIMRX2_PORT_STS */ +#define ARIZONA_SLIMRX2_PORT_STS_SHIFT 1 /* SLIMRX2_PORT_STS */ +#define ARIZONA_SLIMRX2_PORT_STS_WIDTH 1 /* SLIMRX2_PORT_STS */ +#define ARIZONA_SLIMRX1_PORT_STS 0x0001 /* SLIMRX1_PORT_STS */ +#define ARIZONA_SLIMRX1_PORT_STS_MASK 0x0001 /* SLIMRX1_PORT_STS */ +#define ARIZONA_SLIMRX1_PORT_STS_SHIFT 0 /* SLIMRX1_PORT_STS */ +#define ARIZONA_SLIMRX1_PORT_STS_WIDTH 1 /* SLIMRX1_PORT_STS */ + +/* + * R1528 (0x5F8) - SLIMbus TX Port Status + */ +#define ARIZONA_SLIMTX8_PORT_STS 0x0080 /* SLIMTX8_PORT_STS */ +#define ARIZONA_SLIMTX8_PORT_STS_MASK 0x0080 /* SLIMTX8_PORT_STS */ +#define ARIZONA_SLIMTX8_PORT_STS_SHIFT 7 /* SLIMTX8_PORT_STS */ +#define ARIZONA_SLIMTX8_PORT_STS_WIDTH 1 /* SLIMTX8_PORT_STS */ +#define ARIZONA_SLIMTX7_PORT_STS 0x0040 /* SLIMTX7_PORT_STS */ +#define ARIZONA_SLIMTX7_PORT_STS_MASK 0x0040 /* SLIMTX7_PORT_STS */ +#define ARIZONA_SLIMTX7_PORT_STS_SHIFT 6 /* SLIMTX7_PORT_STS */ +#define ARIZONA_SLIMTX7_PORT_STS_WIDTH 1 /* SLIMTX7_PORT_STS */ +#define ARIZONA_SLIMTX6_PORT_STS 0x0020 /* SLIMTX6_PORT_STS */ +#define ARIZONA_SLIMTX6_PORT_STS_MASK 0x0020 /* SLIMTX6_PORT_STS */ +#define ARIZONA_SLIMTX6_PORT_STS_SHIFT 5 /* SLIMTX6_PORT_STS */ +#define ARIZONA_SLIMTX6_PORT_STS_WIDTH 1 /* SLIMTX6_PORT_STS */ +#define ARIZONA_SLIMTX5_PORT_STS 0x0010 /* SLIMTX5_PORT_STS */ +#define ARIZONA_SLIMTX5_PORT_STS_MASK 0x0010 /* SLIMTX5_PORT_STS */ +#define ARIZONA_SLIMTX5_PORT_STS_SHIFT 4 /* SLIMTX5_PORT_STS */ +#define ARIZONA_SLIMTX5_PORT_STS_WIDTH 1 /* SLIMTX5_PORT_STS */ +#define ARIZONA_SLIMTX4_PORT_STS 0x0008 /* SLIMTX4_PORT_STS */ +#define ARIZONA_SLIMTX4_PORT_STS_MASK 0x0008 /* SLIMTX4_PORT_STS */ +#define ARIZONA_SLIMTX4_PORT_STS_SHIFT 3 /* SLIMTX4_PORT_STS */ +#define ARIZONA_SLIMTX4_PORT_STS_WIDTH 1 /* SLIMTX4_PORT_STS */ +#define ARIZONA_SLIMTX3_PORT_STS 0x0004 /* SLIMTX3_PORT_STS */ +#define ARIZONA_SLIMTX3_PORT_STS_MASK 0x0004 /* SLIMTX3_PORT_STS */ +#define ARIZONA_SLIMTX3_PORT_STS_SHIFT 2 /* SLIMTX3_PORT_STS */ +#define ARIZONA_SLIMTX3_PORT_STS_WIDTH 1 /* SLIMTX3_PORT_STS */ +#define ARIZONA_SLIMTX2_PORT_STS 0x0002 /* SLIMTX2_PORT_STS */ +#define ARIZONA_SLIMTX2_PORT_STS_MASK 0x0002 /* SLIMTX2_PORT_STS */ +#define ARIZONA_SLIMTX2_PORT_STS_SHIFT 1 /* SLIMTX2_PORT_STS */ +#define ARIZONA_SLIMTX2_PORT_STS_WIDTH 1 /* SLIMTX2_PORT_STS */ +#define ARIZONA_SLIMTX1_PORT_STS 0x0001 /* SLIMTX1_PORT_STS */ +#define ARIZONA_SLIMTX1_PORT_STS_MASK 0x0001 /* SLIMTX1_PORT_STS */ +#define ARIZONA_SLIMTX1_PORT_STS_SHIFT 0 /* SLIMTX1_PORT_STS */ +#define ARIZONA_SLIMTX1_PORT_STS_WIDTH 1 /* SLIMTX1_PORT_STS */ + +/* + * R3087 (0xC0F) - IRQ CTRL 1 + */ +#define ARIZONA_IRQ_POL 0x0400 /* IRQ_POL */ +#define ARIZONA_IRQ_POL_MASK 0x0400 /* IRQ_POL */ +#define ARIZONA_IRQ_POL_SHIFT 10 /* IRQ_POL */ +#define ARIZONA_IRQ_POL_WIDTH 1 /* IRQ_POL */ +#define ARIZONA_IRQ_OP_CFG 0x0200 /* IRQ_OP_CFG */ +#define ARIZONA_IRQ_OP_CFG_MASK 0x0200 /* IRQ_OP_CFG */ +#define ARIZONA_IRQ_OP_CFG_SHIFT 9 /* IRQ_OP_CFG */ +#define ARIZONA_IRQ_OP_CFG_WIDTH 1 /* IRQ_OP_CFG */ + +/* + * R3088 (0xC10) - GPIO Debounce Config + */ +#define ARIZONA_GP_DBTIME_MASK 0xF000 /* GP_DBTIME - [15:12] */ +#define ARIZONA_GP_DBTIME_SHIFT 12 /* GP_DBTIME - [15:12] */ +#define ARIZONA_GP_DBTIME_WIDTH 4 /* GP_DBTIME - [15:12] */ + +/* + * R3104 (0xC20) - Misc Pad Ctrl 1 + */ +#define ARIZONA_LDO1ENA_PD 0x8000 /* LDO1ENA_PD */ +#define ARIZONA_LDO1ENA_PD_MASK 0x8000 /* LDO1ENA_PD */ +#define ARIZONA_LDO1ENA_PD_SHIFT 15 /* LDO1ENA_PD */ +#define ARIZONA_LDO1ENA_PD_WIDTH 1 /* LDO1ENA_PD */ +#define ARIZONA_MCLK2_PD 0x2000 /* MCLK2_PD */ +#define ARIZONA_MCLK2_PD_MASK 0x2000 /* MCLK2_PD */ +#define ARIZONA_MCLK2_PD_SHIFT 13 /* MCLK2_PD */ +#define ARIZONA_MCLK2_PD_WIDTH 1 /* MCLK2_PD */ +#define ARIZONA_RSTB_PU 0x0002 /* RSTB_PU */ +#define ARIZONA_RSTB_PU_MASK 0x0002 /* RSTB_PU */ +#define ARIZONA_RSTB_PU_SHIFT 1 /* RSTB_PU */ +#define ARIZONA_RSTB_PU_WIDTH 1 /* RSTB_PU */ + +/* + * R3105 (0xC21) - Misc Pad Ctrl 2 + */ +#define ARIZONA_MCLK1_PD 0x1000 /* MCLK1_PD */ +#define ARIZONA_MCLK1_PD_MASK 0x1000 /* MCLK1_PD */ +#define ARIZONA_MCLK1_PD_SHIFT 12 /* MCLK1_PD */ +#define ARIZONA_MCLK1_PD_WIDTH 1 /* MCLK1_PD */ +#define ARIZONA_MICD_PD 0x0100 /* MICD_PD */ +#define ARIZONA_MICD_PD_MASK 0x0100 /* MICD_PD */ +#define ARIZONA_MICD_PD_SHIFT 8 /* MICD_PD */ +#define ARIZONA_MICD_PD_WIDTH 1 /* MICD_PD */ +#define ARIZONA_ADDR_PD 0x0001 /* ADDR_PD */ +#define ARIZONA_ADDR_PD_MASK 0x0001 /* ADDR_PD */ +#define ARIZONA_ADDR_PD_SHIFT 0 /* ADDR_PD */ +#define ARIZONA_ADDR_PD_WIDTH 1 /* ADDR_PD */ + +/* + * R3106 (0xC22) - Misc Pad Ctrl 3 + */ +#define ARIZONA_DMICDAT4_PD 0x0008 /* DMICDAT4_PD */ +#define ARIZONA_DMICDAT4_PD_MASK 0x0008 /* DMICDAT4_PD */ +#define ARIZONA_DMICDAT4_PD_SHIFT 3 /* DMICDAT4_PD */ +#define ARIZONA_DMICDAT4_PD_WIDTH 1 /* DMICDAT4_PD */ +#define ARIZONA_DMICDAT3_PD 0x0004 /* DMICDAT3_PD */ +#define ARIZONA_DMICDAT3_PD_MASK 0x0004 /* DMICDAT3_PD */ +#define ARIZONA_DMICDAT3_PD_SHIFT 2 /* DMICDAT3_PD */ +#define ARIZONA_DMICDAT3_PD_WIDTH 1 /* DMICDAT3_PD */ +#define ARIZONA_DMICDAT2_PD 0x0002 /* DMICDAT2_PD */ +#define ARIZONA_DMICDAT2_PD_MASK 0x0002 /* DMICDAT2_PD */ +#define ARIZONA_DMICDAT2_PD_SHIFT 1 /* DMICDAT2_PD */ +#define ARIZONA_DMICDAT2_PD_WIDTH 1 /* DMICDAT2_PD */ +#define ARIZONA_DMICDAT1_PD 0x0001 /* DMICDAT1_PD */ +#define ARIZONA_DMICDAT1_PD_MASK 0x0001 /* DMICDAT1_PD */ +#define ARIZONA_DMICDAT1_PD_SHIFT 0 /* DMICDAT1_PD */ +#define ARIZONA_DMICDAT1_PD_WIDTH 1 /* DMICDAT1_PD */ + +/* + * R3107 (0xC23) - Misc Pad Ctrl 4 + */ +#define ARIZONA_AIF1RXLRCLK_PU 0x0020 /* AIF1RXLRCLK_PU */ +#define ARIZONA_AIF1RXLRCLK_PU_MASK 0x0020 /* AIF1RXLRCLK_PU */ +#define ARIZONA_AIF1RXLRCLK_PU_SHIFT 5 /* AIF1RXLRCLK_PU */ +#define ARIZONA_AIF1RXLRCLK_PU_WIDTH 1 /* AIF1RXLRCLK_PU */ +#define ARIZONA_AIF1RXLRCLK_PD 0x0010 /* AIF1RXLRCLK_PD */ +#define ARIZONA_AIF1RXLRCLK_PD_MASK 0x0010 /* AIF1RXLRCLK_PD */ +#define ARIZONA_AIF1RXLRCLK_PD_SHIFT 4 /* AIF1RXLRCLK_PD */ +#define ARIZONA_AIF1RXLRCLK_PD_WIDTH 1 /* AIF1RXLRCLK_PD */ +#define ARIZONA_AIF1BCLK_PU 0x0008 /* AIF1BCLK_PU */ +#define ARIZONA_AIF1BCLK_PU_MASK 0x0008 /* AIF1BCLK_PU */ +#define ARIZONA_AIF1BCLK_PU_SHIFT 3 /* AIF1BCLK_PU */ +#define ARIZONA_AIF1BCLK_PU_WIDTH 1 /* AIF1BCLK_PU */ +#define ARIZONA_AIF1BCLK_PD 0x0004 /* AIF1BCLK_PD */ +#define ARIZONA_AIF1BCLK_PD_MASK 0x0004 /* AIF1BCLK_PD */ +#define ARIZONA_AIF1BCLK_PD_SHIFT 2 /* AIF1BCLK_PD */ +#define ARIZONA_AIF1BCLK_PD_WIDTH 1 /* AIF1BCLK_PD */ +#define ARIZONA_AIF1RXDAT_PU 0x0002 /* AIF1RXDAT_PU */ +#define ARIZONA_AIF1RXDAT_PU_MASK 0x0002 /* AIF1RXDAT_PU */ +#define ARIZONA_AIF1RXDAT_PU_SHIFT 1 /* AIF1RXDAT_PU */ +#define ARIZONA_AIF1RXDAT_PU_WIDTH 1 /* AIF1RXDAT_PU */ +#define ARIZONA_AIF1RXDAT_PD 0x0001 /* AIF1RXDAT_PD */ +#define ARIZONA_AIF1RXDAT_PD_MASK 0x0001 /* AIF1RXDAT_PD */ +#define ARIZONA_AIF1RXDAT_PD_SHIFT 0 /* AIF1RXDAT_PD */ +#define ARIZONA_AIF1RXDAT_PD_WIDTH 1 /* AIF1RXDAT_PD */ + +/* + * R3108 (0xC24) - Misc Pad Ctrl 5 + */ +#define ARIZONA_AIF2RXLRCLK_PU 0x0020 /* AIF2RXLRCLK_PU */ +#define ARIZONA_AIF2RXLRCLK_PU_MASK 0x0020 /* AIF2RXLRCLK_PU */ +#define ARIZONA_AIF2RXLRCLK_PU_SHIFT 5 /* AIF2RXLRCLK_PU */ +#define ARIZONA_AIF2RXLRCLK_PU_WIDTH 1 /* AIF2RXLRCLK_PU */ +#define ARIZONA_AIF2RXLRCLK_PD 0x0010 /* AIF2RXLRCLK_PD */ +#define ARIZONA_AIF2RXLRCLK_PD_MASK 0x0010 /* AIF2RXLRCLK_PD */ +#define ARIZONA_AIF2RXLRCLK_PD_SHIFT 4 /* AIF2RXLRCLK_PD */ +#define ARIZONA_AIF2RXLRCLK_PD_WIDTH 1 /* AIF2RXLRCLK_PD */ +#define ARIZONA_AIF2BCLK_PU 0x0008 /* AIF2BCLK_PU */ +#define ARIZONA_AIF2BCLK_PU_MASK 0x0008 /* AIF2BCLK_PU */ +#define ARIZONA_AIF2BCLK_PU_SHIFT 3 /* AIF2BCLK_PU */ +#define ARIZONA_AIF2BCLK_PU_WIDTH 1 /* AIF2BCLK_PU */ +#define ARIZONA_AIF2BCLK_PD 0x0004 /* AIF2BCLK_PD */ +#define ARIZONA_AIF2BCLK_PD_MASK 0x0004 /* AIF2BCLK_PD */ +#define ARIZONA_AIF2BCLK_PD_SHIFT 2 /* AIF2BCLK_PD */ +#define ARIZONA_AIF2BCLK_PD_WIDTH 1 /* AIF2BCLK_PD */ +#define ARIZONA_AIF2RXDAT_PU 0x0002 /* AIF2RXDAT_PU */ +#define ARIZONA_AIF2RXDAT_PU_MASK 0x0002 /* AIF2RXDAT_PU */ +#define ARIZONA_AIF2RXDAT_PU_SHIFT 1 /* AIF2RXDAT_PU */ +#define ARIZONA_AIF2RXDAT_PU_WIDTH 1 /* AIF2RXDAT_PU */ +#define ARIZONA_AIF2RXDAT_PD 0x0001 /* AIF2RXDAT_PD */ +#define ARIZONA_AIF2RXDAT_PD_MASK 0x0001 /* AIF2RXDAT_PD */ +#define ARIZONA_AIF2RXDAT_PD_SHIFT 0 /* AIF2RXDAT_PD */ +#define ARIZONA_AIF2RXDAT_PD_WIDTH 1 /* AIF2RXDAT_PD */ + +/* + * R3109 (0xC25) - Misc Pad Ctrl 6 + */ +#define ARIZONA_AIF3RXLRCLK_PU 0x0020 /* AIF3RXLRCLK_PU */ +#define ARIZONA_AIF3RXLRCLK_PU_MASK 0x0020 /* AIF3RXLRCLK_PU */ +#define ARIZONA_AIF3RXLRCLK_PU_SHIFT 5 /* AIF3RXLRCLK_PU */ +#define ARIZONA_AIF3RXLRCLK_PU_WIDTH 1 /* AIF3RXLRCLK_PU */ +#define ARIZONA_AIF3RXLRCLK_PD 0x0010 /* AIF3RXLRCLK_PD */ +#define ARIZONA_AIF3RXLRCLK_PD_MASK 0x0010 /* AIF3RXLRCLK_PD */ +#define ARIZONA_AIF3RXLRCLK_PD_SHIFT 4 /* AIF3RXLRCLK_PD */ +#define ARIZONA_AIF3RXLRCLK_PD_WIDTH 1 /* AIF3RXLRCLK_PD */ +#define ARIZONA_AIF3BCLK_PU 0x0008 /* AIF3BCLK_PU */ +#define ARIZONA_AIF3BCLK_PU_MASK 0x0008 /* AIF3BCLK_PU */ +#define ARIZONA_AIF3BCLK_PU_SHIFT 3 /* AIF3BCLK_PU */ +#define ARIZONA_AIF3BCLK_PU_WIDTH 1 /* AIF3BCLK_PU */ +#define ARIZONA_AIF3BCLK_PD 0x0004 /* AIF3BCLK_PD */ +#define ARIZONA_AIF3BCLK_PD_MASK 0x0004 /* AIF3BCLK_PD */ +#define ARIZONA_AIF3BCLK_PD_SHIFT 2 /* AIF3BCLK_PD */ +#define ARIZONA_AIF3BCLK_PD_WIDTH 1 /* AIF3BCLK_PD */ +#define ARIZONA_AIF3RXDAT_PU 0x0002 /* AIF3RXDAT_PU */ +#define ARIZONA_AIF3RXDAT_PU_MASK 0x0002 /* AIF3RXDAT_PU */ +#define ARIZONA_AIF3RXDAT_PU_SHIFT 1 /* AIF3RXDAT_PU */ +#define ARIZONA_AIF3RXDAT_PU_WIDTH 1 /* AIF3RXDAT_PU */ +#define ARIZONA_AIF3RXDAT_PD 0x0001 /* AIF3RXDAT_PD */ +#define ARIZONA_AIF3RXDAT_PD_MASK 0x0001 /* AIF3RXDAT_PD */ +#define ARIZONA_AIF3RXDAT_PD_SHIFT 0 /* AIF3RXDAT_PD */ +#define ARIZONA_AIF3RXDAT_PD_WIDTH 1 /* AIF3RXDAT_PD */ + +/* + * R3328 (0xD00) - Interrupt Status 1 + */ +#define ARIZONA_GP4_EINT1 0x0008 /* GP4_EINT1 */ +#define ARIZONA_GP4_EINT1_MASK 0x0008 /* GP4_EINT1 */ +#define ARIZONA_GP4_EINT1_SHIFT 3 /* GP4_EINT1 */ +#define ARIZONA_GP4_EINT1_WIDTH 1 /* GP4_EINT1 */ +#define ARIZONA_GP3_EINT1 0x0004 /* GP3_EINT1 */ +#define ARIZONA_GP3_EINT1_MASK 0x0004 /* GP3_EINT1 */ +#define ARIZONA_GP3_EINT1_SHIFT 2 /* GP3_EINT1 */ +#define ARIZONA_GP3_EINT1_WIDTH 1 /* GP3_EINT1 */ +#define ARIZONA_GP2_EINT1 0x0002 /* GP2_EINT1 */ +#define ARIZONA_GP2_EINT1_MASK 0x0002 /* GP2_EINT1 */ +#define ARIZONA_GP2_EINT1_SHIFT 1 /* GP2_EINT1 */ +#define ARIZONA_GP2_EINT1_WIDTH 1 /* GP2_EINT1 */ +#define ARIZONA_GP1_EINT1 0x0001 /* GP1_EINT1 */ +#define ARIZONA_GP1_EINT1_MASK 0x0001 /* GP1_EINT1 */ +#define ARIZONA_GP1_EINT1_SHIFT 0 /* GP1_EINT1 */ +#define ARIZONA_GP1_EINT1_WIDTH 1 /* GP1_EINT1 */ + +/* + * R3329 (0xD01) - Interrupt Status 2 + */ +#define ARIZONA_DSP1_RAM_RDY_EINT1 0x0100 /* DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_DSP1_RAM_RDY_EINT1_MASK 0x0100 /* DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_DSP1_RAM_RDY_EINT1_SHIFT 8 /* DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_DSP1_RAM_RDY_EINT1_WIDTH 1 /* DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_DSP_IRQ2_EINT1 0x0002 /* DSP_IRQ2_EINT1 */ +#define ARIZONA_DSP_IRQ2_EINT1_MASK 0x0002 /* DSP_IRQ2_EINT1 */ +#define ARIZONA_DSP_IRQ2_EINT1_SHIFT 1 /* DSP_IRQ2_EINT1 */ +#define ARIZONA_DSP_IRQ2_EINT1_WIDTH 1 /* DSP_IRQ2_EINT1 */ +#define ARIZONA_DSP_IRQ1_EINT1 0x0001 /* DSP_IRQ1_EINT1 */ +#define ARIZONA_DSP_IRQ1_EINT1_MASK 0x0001 /* DSP_IRQ1_EINT1 */ +#define ARIZONA_DSP_IRQ1_EINT1_SHIFT 0 /* DSP_IRQ1_EINT1 */ +#define ARIZONA_DSP_IRQ1_EINT1_WIDTH 1 /* DSP_IRQ1_EINT1 */ + +/* + * R3330 (0xD02) - Interrupt Status 3 + */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT1 0x8000 /* SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT1_MASK 0x8000 /* SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT1_SHIFT 15 /* SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT1_WIDTH 1 /* SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_SPK_SHUTDOWN_EINT1 0x4000 /* SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_SPK_SHUTDOWN_EINT1_MASK 0x4000 /* SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_SPK_SHUTDOWN_EINT1_SHIFT 14 /* SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_SPK_SHUTDOWN_EINT1_WIDTH 1 /* SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_HPDET_EINT1 0x2000 /* HPDET_EINT1 */ +#define ARIZONA_HPDET_EINT1_MASK 0x2000 /* HPDET_EINT1 */ +#define ARIZONA_HPDET_EINT1_SHIFT 13 /* HPDET_EINT1 */ +#define ARIZONA_HPDET_EINT1_WIDTH 1 /* HPDET_EINT1 */ +#define ARIZONA_MICDET_EINT1 0x1000 /* MICDET_EINT1 */ +#define ARIZONA_MICDET_EINT1_MASK 0x1000 /* MICDET_EINT1 */ +#define ARIZONA_MICDET_EINT1_SHIFT 12 /* MICDET_EINT1 */ +#define ARIZONA_MICDET_EINT1_WIDTH 1 /* MICDET_EINT1 */ +#define ARIZONA_WSEQ_DONE_EINT1 0x0800 /* WSEQ_DONE_EINT1 */ +#define ARIZONA_WSEQ_DONE_EINT1_MASK 0x0800 /* WSEQ_DONE_EINT1 */ +#define ARIZONA_WSEQ_DONE_EINT1_SHIFT 11 /* WSEQ_DONE_EINT1 */ +#define ARIZONA_WSEQ_DONE_EINT1_WIDTH 1 /* WSEQ_DONE_EINT1 */ +#define ARIZONA_DRC2_SIG_DET_EINT1 0x0400 /* DRC2_SIG_DET_EINT1 */ +#define ARIZONA_DRC2_SIG_DET_EINT1_MASK 0x0400 /* DRC2_SIG_DET_EINT1 */ +#define ARIZONA_DRC2_SIG_DET_EINT1_SHIFT 10 /* DRC2_SIG_DET_EINT1 */ +#define ARIZONA_DRC2_SIG_DET_EINT1_WIDTH 1 /* DRC2_SIG_DET_EINT1 */ +#define ARIZONA_DRC1_SIG_DET_EINT1 0x0200 /* DRC1_SIG_DET_EINT1 */ +#define ARIZONA_DRC1_SIG_DET_EINT1_MASK 0x0200 /* DRC1_SIG_DET_EINT1 */ +#define ARIZONA_DRC1_SIG_DET_EINT1_SHIFT 9 /* DRC1_SIG_DET_EINT1 */ +#define ARIZONA_DRC1_SIG_DET_EINT1_WIDTH 1 /* DRC1_SIG_DET_EINT1 */ +#define ARIZONA_ASRC2_LOCK_EINT1 0x0100 /* ASRC2_LOCK_EINT1 */ +#define ARIZONA_ASRC2_LOCK_EINT1_MASK 0x0100 /* ASRC2_LOCK_EINT1 */ +#define ARIZONA_ASRC2_LOCK_EINT1_SHIFT 8 /* ASRC2_LOCK_EINT1 */ +#define ARIZONA_ASRC2_LOCK_EINT1_WIDTH 1 /* ASRC2_LOCK_EINT1 */ +#define ARIZONA_ASRC1_LOCK_EINT1 0x0080 /* ASRC1_LOCK_EINT1 */ +#define ARIZONA_ASRC1_LOCK_EINT1_MASK 0x0080 /* ASRC1_LOCK_EINT1 */ +#define ARIZONA_ASRC1_LOCK_EINT1_SHIFT 7 /* ASRC1_LOCK_EINT1 */ +#define ARIZONA_ASRC1_LOCK_EINT1_WIDTH 1 /* ASRC1_LOCK_EINT1 */ +#define ARIZONA_UNDERCLOCKED_EINT1 0x0040 /* UNDERCLOCKED_EINT1 */ +#define ARIZONA_UNDERCLOCKED_EINT1_MASK 0x0040 /* UNDERCLOCKED_EINT1 */ +#define ARIZONA_UNDERCLOCKED_EINT1_SHIFT 6 /* UNDERCLOCKED_EINT1 */ +#define ARIZONA_UNDERCLOCKED_EINT1_WIDTH 1 /* UNDERCLOCKED_EINT1 */ +#define ARIZONA_OVERCLOCKED_EINT1 0x0020 /* OVERCLOCKED_EINT1 */ +#define ARIZONA_OVERCLOCKED_EINT1_MASK 0x0020 /* OVERCLOCKED_EINT1 */ +#define ARIZONA_OVERCLOCKED_EINT1_SHIFT 5 /* OVERCLOCKED_EINT1 */ +#define ARIZONA_OVERCLOCKED_EINT1_WIDTH 1 /* OVERCLOCKED_EINT1 */ +#define ARIZONA_FLL2_LOCK_EINT1 0x0008 /* FLL2_LOCK_EINT1 */ +#define ARIZONA_FLL2_LOCK_EINT1_MASK 0x0008 /* FLL2_LOCK_EINT1 */ +#define ARIZONA_FLL2_LOCK_EINT1_SHIFT 3 /* FLL2_LOCK_EINT1 */ +#define ARIZONA_FLL2_LOCK_EINT1_WIDTH 1 /* FLL2_LOCK_EINT1 */ +#define ARIZONA_FLL1_LOCK_EINT1 0x0004 /* FLL1_LOCK_EINT1 */ +#define ARIZONA_FLL1_LOCK_EINT1_MASK 0x0004 /* FLL1_LOCK_EINT1 */ +#define ARIZONA_FLL1_LOCK_EINT1_SHIFT 2 /* FLL1_LOCK_EINT1 */ +#define ARIZONA_FLL1_LOCK_EINT1_WIDTH 1 /* FLL1_LOCK_EINT1 */ +#define ARIZONA_CLKGEN_ERR_EINT1 0x0002 /* CLKGEN_ERR_EINT1 */ +#define ARIZONA_CLKGEN_ERR_EINT1_MASK 0x0002 /* CLKGEN_ERR_EINT1 */ +#define ARIZONA_CLKGEN_ERR_EINT1_SHIFT 1 /* CLKGEN_ERR_EINT1 */ +#define ARIZONA_CLKGEN_ERR_EINT1_WIDTH 1 /* CLKGEN_ERR_EINT1 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT1 0x0001 /* CLKGEN_ERR_ASYNC_EINT1 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT1_MASK 0x0001 /* CLKGEN_ERR_ASYNC_EINT1 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT1_SHIFT 0 /* CLKGEN_ERR_ASYNC_EINT1 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT1_WIDTH 1 /* CLKGEN_ERR_ASYNC_EINT1 */ + +/* + * R3331 (0xD03) - Interrupt Status 4 + */ +#define ARIZONA_ASRC_CFG_ERR_EINT1 0x8000 /* ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_ASRC_CFG_ERR_EINT1_MASK 0x8000 /* ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_ASRC_CFG_ERR_EINT1_SHIFT 15 /* ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_ASRC_CFG_ERR_EINT1_WIDTH 1 /* ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_AIF3_ERR_EINT1 0x4000 /* AIF3_ERR_EINT1 */ +#define ARIZONA_AIF3_ERR_EINT1_MASK 0x4000 /* AIF3_ERR_EINT1 */ +#define ARIZONA_AIF3_ERR_EINT1_SHIFT 14 /* AIF3_ERR_EINT1 */ +#define ARIZONA_AIF3_ERR_EINT1_WIDTH 1 /* AIF3_ERR_EINT1 */ +#define ARIZONA_AIF2_ERR_EINT1 0x2000 /* AIF2_ERR_EINT1 */ +#define ARIZONA_AIF2_ERR_EINT1_MASK 0x2000 /* AIF2_ERR_EINT1 */ +#define ARIZONA_AIF2_ERR_EINT1_SHIFT 13 /* AIF2_ERR_EINT1 */ +#define ARIZONA_AIF2_ERR_EINT1_WIDTH 1 /* AIF2_ERR_EINT1 */ +#define ARIZONA_AIF1_ERR_EINT1 0x1000 /* AIF1_ERR_EINT1 */ +#define ARIZONA_AIF1_ERR_EINT1_MASK 0x1000 /* AIF1_ERR_EINT1 */ +#define ARIZONA_AIF1_ERR_EINT1_SHIFT 12 /* AIF1_ERR_EINT1 */ +#define ARIZONA_AIF1_ERR_EINT1_WIDTH 1 /* AIF1_ERR_EINT1 */ +#define ARIZONA_CTRLIF_ERR_EINT1 0x0800 /* CTRLIF_ERR_EINT1 */ +#define ARIZONA_CTRLIF_ERR_EINT1_MASK 0x0800 /* CTRLIF_ERR_EINT1 */ +#define ARIZONA_CTRLIF_ERR_EINT1_SHIFT 11 /* CTRLIF_ERR_EINT1 */ +#define ARIZONA_CTRLIF_ERR_EINT1_WIDTH 1 /* CTRLIF_ERR_EINT1 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT1 0x0400 /* MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT1_MASK 0x0400 /* MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT1_SHIFT 10 /* MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT1_WIDTH 1 /* MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT1 0x0200 /* ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT1_MASK 0x0200 /* ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT1_SHIFT 9 /* ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT1_WIDTH 1 /* ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT1 0x0100 /* SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT1_MASK 0x0100 /* SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT1_SHIFT 8 /* SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT1_WIDTH 1 /* SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT1 0x0080 /* ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT1_MASK 0x0080 /* ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT1_SHIFT 7 /* ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT1_WIDTH 1 /* ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT1 0x0040 /* ISRC2_CFG_ERR_EINT1 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT1_MASK 0x0040 /* ISRC2_CFG_ERR_EINT1 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT1_SHIFT 6 /* ISRC2_CFG_ERR_EINT1 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT1_WIDTH 1 /* ISRC2_CFG_ERR_EINT1 */ + +/* + * R3332 (0xD04) - Interrupt Status 5 + */ +#define ARIZONA_BOOT_DONE_EINT1 0x0100 /* BOOT_DONE_EINT1 */ +#define ARIZONA_BOOT_DONE_EINT1_MASK 0x0100 /* BOOT_DONE_EINT1 */ +#define ARIZONA_BOOT_DONE_EINT1_SHIFT 8 /* BOOT_DONE_EINT1 */ +#define ARIZONA_BOOT_DONE_EINT1_WIDTH 1 /* BOOT_DONE_EINT1 */ +#define ARIZONA_DCS_DAC_DONE_EINT1 0x0080 /* DCS_DAC_DONE_EINT1 */ +#define ARIZONA_DCS_DAC_DONE_EINT1_MASK 0x0080 /* DCS_DAC_DONE_EINT1 */ +#define ARIZONA_DCS_DAC_DONE_EINT1_SHIFT 7 /* DCS_DAC_DONE_EINT1 */ +#define ARIZONA_DCS_DAC_DONE_EINT1_WIDTH 1 /* DCS_DAC_DONE_EINT1 */ +#define ARIZONA_DCS_HP_DONE_EINT1 0x0040 /* DCS_HP_DONE_EINT1 */ +#define ARIZONA_DCS_HP_DONE_EINT1_MASK 0x0040 /* DCS_HP_DONE_EINT1 */ +#define ARIZONA_DCS_HP_DONE_EINT1_SHIFT 6 /* DCS_HP_DONE_EINT1 */ +#define ARIZONA_DCS_HP_DONE_EINT1_WIDTH 1 /* DCS_HP_DONE_EINT1 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT1 0x0002 /* FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT1_MASK 0x0002 /* FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT1_SHIFT 1 /* FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT1_WIDTH 1 /* FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT1 0x0001 /* FLL1_CLOCK_OK_EINT1 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT1_MASK 0x0001 /* FLL1_CLOCK_OK_EINT1 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT1_SHIFT 0 /* FLL1_CLOCK_OK_EINT1 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT1_WIDTH 1 /* FLL1_CLOCK_OK_EINT1 */ + +/* + * R3336 (0xD08) - Interrupt Status 1 Mask + */ +#define ARIZONA_IM_GP4_EINT1 0x0008 /* IM_GP4_EINT1 */ +#define ARIZONA_IM_GP4_EINT1_MASK 0x0008 /* IM_GP4_EINT1 */ +#define ARIZONA_IM_GP4_EINT1_SHIFT 3 /* IM_GP4_EINT1 */ +#define ARIZONA_IM_GP4_EINT1_WIDTH 1 /* IM_GP4_EINT1 */ +#define ARIZONA_IM_GP3_EINT1 0x0004 /* IM_GP3_EINT1 */ +#define ARIZONA_IM_GP3_EINT1_MASK 0x0004 /* IM_GP3_EINT1 */ +#define ARIZONA_IM_GP3_EINT1_SHIFT 2 /* IM_GP3_EINT1 */ +#define ARIZONA_IM_GP3_EINT1_WIDTH 1 /* IM_GP3_EINT1 */ +#define ARIZONA_IM_GP2_EINT1 0x0002 /* IM_GP2_EINT1 */ +#define ARIZONA_IM_GP2_EINT1_MASK 0x0002 /* IM_GP2_EINT1 */ +#define ARIZONA_IM_GP2_EINT1_SHIFT 1 /* IM_GP2_EINT1 */ +#define ARIZONA_IM_GP2_EINT1_WIDTH 1 /* IM_GP2_EINT1 */ +#define ARIZONA_IM_GP1_EINT1 0x0001 /* IM_GP1_EINT1 */ +#define ARIZONA_IM_GP1_EINT1_MASK 0x0001 /* IM_GP1_EINT1 */ +#define ARIZONA_IM_GP1_EINT1_SHIFT 0 /* IM_GP1_EINT1 */ +#define ARIZONA_IM_GP1_EINT1_WIDTH 1 /* IM_GP1_EINT1 */ + +/* + * R3337 (0xD09) - Interrupt Status 2 Mask + */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT1 0x0100 /* IM_DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT1_MASK 0x0100 /* IM_DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT1_SHIFT 8 /* IM_DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT1_WIDTH 1 /* IM_DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_IM_DSP_IRQ2_EINT1 0x0002 /* IM_DSP_IRQ2_EINT1 */ +#define ARIZONA_IM_DSP_IRQ2_EINT1_MASK 0x0002 /* IM_DSP_IRQ2_EINT1 */ +#define ARIZONA_IM_DSP_IRQ2_EINT1_SHIFT 1 /* IM_DSP_IRQ2_EINT1 */ +#define ARIZONA_IM_DSP_IRQ2_EINT1_WIDTH 1 /* IM_DSP_IRQ2_EINT1 */ +#define ARIZONA_IM_DSP_IRQ1_EINT1 0x0001 /* IM_DSP_IRQ1_EINT1 */ +#define ARIZONA_IM_DSP_IRQ1_EINT1_MASK 0x0001 /* IM_DSP_IRQ1_EINT1 */ +#define ARIZONA_IM_DSP_IRQ1_EINT1_SHIFT 0 /* IM_DSP_IRQ1_EINT1 */ +#define ARIZONA_IM_DSP_IRQ1_EINT1_WIDTH 1 /* IM_DSP_IRQ1_EINT1 */ + +/* + * R3338 (0xD0A) - Interrupt Status 3 Mask + */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT1 0x8000 /* IM_SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT1_MASK 0x8000 /* IM_SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT1_SHIFT 15 /* IM_SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT1_WIDTH 1 /* IM_SPK_SHUTDOWN_WARN_EINT1 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT1 0x4000 /* IM_SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT1_MASK 0x4000 /* IM_SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT1_SHIFT 14 /* IM_SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT1_WIDTH 1 /* IM_SPK_SHUTDOWN_EINT1 */ +#define ARIZONA_IM_HPDET_EINT1 0x2000 /* IM_HPDET_EINT1 */ +#define ARIZONA_IM_HPDET_EINT1_MASK 0x2000 /* IM_HPDET_EINT1 */ +#define ARIZONA_IM_HPDET_EINT1_SHIFT 13 /* IM_HPDET_EINT1 */ +#define ARIZONA_IM_HPDET_EINT1_WIDTH 1 /* IM_HPDET_EINT1 */ +#define ARIZONA_IM_MICDET_EINT1 0x1000 /* IM_MICDET_EINT1 */ +#define ARIZONA_IM_MICDET_EINT1_MASK 0x1000 /* IM_MICDET_EINT1 */ +#define ARIZONA_IM_MICDET_EINT1_SHIFT 12 /* IM_MICDET_EINT1 */ +#define ARIZONA_IM_MICDET_EINT1_WIDTH 1 /* IM_MICDET_EINT1 */ +#define ARIZONA_IM_WSEQ_DONE_EINT1 0x0800 /* IM_WSEQ_DONE_EINT1 */ +#define ARIZONA_IM_WSEQ_DONE_EINT1_MASK 0x0800 /* IM_WSEQ_DONE_EINT1 */ +#define ARIZONA_IM_WSEQ_DONE_EINT1_SHIFT 11 /* IM_WSEQ_DONE_EINT1 */ +#define ARIZONA_IM_WSEQ_DONE_EINT1_WIDTH 1 /* IM_WSEQ_DONE_EINT1 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT1 0x0400 /* IM_DRC2_SIG_DET_EINT1 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT1_MASK 0x0400 /* IM_DRC2_SIG_DET_EINT1 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT1_SHIFT 10 /* IM_DRC2_SIG_DET_EINT1 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT1_WIDTH 1 /* IM_DRC2_SIG_DET_EINT1 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT1 0x0200 /* IM_DRC1_SIG_DET_EINT1 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT1_MASK 0x0200 /* IM_DRC1_SIG_DET_EINT1 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT1_SHIFT 9 /* IM_DRC1_SIG_DET_EINT1 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT1_WIDTH 1 /* IM_DRC1_SIG_DET_EINT1 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT1 0x0100 /* IM_ASRC2_LOCK_EINT1 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT1_MASK 0x0100 /* IM_ASRC2_LOCK_EINT1 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT1_SHIFT 8 /* IM_ASRC2_LOCK_EINT1 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT1_WIDTH 1 /* IM_ASRC2_LOCK_EINT1 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT1 0x0080 /* IM_ASRC1_LOCK_EINT1 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT1_MASK 0x0080 /* IM_ASRC1_LOCK_EINT1 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT1_SHIFT 7 /* IM_ASRC1_LOCK_EINT1 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT1_WIDTH 1 /* IM_ASRC1_LOCK_EINT1 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT1 0x0040 /* IM_UNDERCLOCKED_EINT1 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT1_MASK 0x0040 /* IM_UNDERCLOCKED_EINT1 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT1_SHIFT 6 /* IM_UNDERCLOCKED_EINT1 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT1_WIDTH 1 /* IM_UNDERCLOCKED_EINT1 */ +#define ARIZONA_IM_OVERCLOCKED_EINT1 0x0020 /* IM_OVERCLOCKED_EINT1 */ +#define ARIZONA_IM_OVERCLOCKED_EINT1_MASK 0x0020 /* IM_OVERCLOCKED_EINT1 */ +#define ARIZONA_IM_OVERCLOCKED_EINT1_SHIFT 5 /* IM_OVERCLOCKED_EINT1 */ +#define ARIZONA_IM_OVERCLOCKED_EINT1_WIDTH 1 /* IM_OVERCLOCKED_EINT1 */ +#define ARIZONA_IM_FLL2_LOCK_EINT1 0x0008 /* IM_FLL2_LOCK_EINT1 */ +#define ARIZONA_IM_FLL2_LOCK_EINT1_MASK 0x0008 /* IM_FLL2_LOCK_EINT1 */ +#define ARIZONA_IM_FLL2_LOCK_EINT1_SHIFT 3 /* IM_FLL2_LOCK_EINT1 */ +#define ARIZONA_IM_FLL2_LOCK_EINT1_WIDTH 1 /* IM_FLL2_LOCK_EINT1 */ +#define ARIZONA_IM_FLL1_LOCK_EINT1 0x0004 /* IM_FLL1_LOCK_EINT1 */ +#define ARIZONA_IM_FLL1_LOCK_EINT1_MASK 0x0004 /* IM_FLL1_LOCK_EINT1 */ +#define ARIZONA_IM_FLL1_LOCK_EINT1_SHIFT 2 /* IM_FLL1_LOCK_EINT1 */ +#define ARIZONA_IM_FLL1_LOCK_EINT1_WIDTH 1 /* IM_FLL1_LOCK_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT1 0x0002 /* IM_CLKGEN_ERR_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT1_MASK 0x0002 /* IM_CLKGEN_ERR_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT1_SHIFT 1 /* IM_CLKGEN_ERR_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT1_WIDTH 1 /* IM_CLKGEN_ERR_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT1 0x0001 /* IM_CLKGEN_ERR_ASYNC_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT1_MASK 0x0001 /* IM_CLKGEN_ERR_ASYNC_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT1_SHIFT 0 /* IM_CLKGEN_ERR_ASYNC_EINT1 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT1_WIDTH 1 /* IM_CLKGEN_ERR_ASYNC_EINT1 */ + +/* + * R3339 (0xD0B) - Interrupt Status 4 Mask + */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT1 0x8000 /* IM_ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT1_MASK 0x8000 /* IM_ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT1_SHIFT 15 /* IM_ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT1_WIDTH 1 /* IM_ASRC_CFG_ERR_EINT1 */ +#define ARIZONA_IM_AIF3_ERR_EINT1 0x4000 /* IM_AIF3_ERR_EINT1 */ +#define ARIZONA_IM_AIF3_ERR_EINT1_MASK 0x4000 /* IM_AIF3_ERR_EINT1 */ +#define ARIZONA_IM_AIF3_ERR_EINT1_SHIFT 14 /* IM_AIF3_ERR_EINT1 */ +#define ARIZONA_IM_AIF3_ERR_EINT1_WIDTH 1 /* IM_AIF3_ERR_EINT1 */ +#define ARIZONA_IM_AIF2_ERR_EINT1 0x2000 /* IM_AIF2_ERR_EINT1 */ +#define ARIZONA_IM_AIF2_ERR_EINT1_MASK 0x2000 /* IM_AIF2_ERR_EINT1 */ +#define ARIZONA_IM_AIF2_ERR_EINT1_SHIFT 13 /* IM_AIF2_ERR_EINT1 */ +#define ARIZONA_IM_AIF2_ERR_EINT1_WIDTH 1 /* IM_AIF2_ERR_EINT1 */ +#define ARIZONA_IM_AIF1_ERR_EINT1 0x1000 /* IM_AIF1_ERR_EINT1 */ +#define ARIZONA_IM_AIF1_ERR_EINT1_MASK 0x1000 /* IM_AIF1_ERR_EINT1 */ +#define ARIZONA_IM_AIF1_ERR_EINT1_SHIFT 12 /* IM_AIF1_ERR_EINT1 */ +#define ARIZONA_IM_AIF1_ERR_EINT1_WIDTH 1 /* IM_AIF1_ERR_EINT1 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT1 0x0800 /* IM_CTRLIF_ERR_EINT1 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT1_MASK 0x0800 /* IM_CTRLIF_ERR_EINT1 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT1_SHIFT 11 /* IM_CTRLIF_ERR_EINT1 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT1_WIDTH 1 /* IM_CTRLIF_ERR_EINT1 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT1 0x0400 /* IM_MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT1_MASK 0x0400 /* IM_MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT1_SHIFT 10 /* IM_MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT1_WIDTH 1 /* IM_MIXER_DROPPED_SAMPLE_EINT1 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT1 0x0200 /* IM_ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT1_MASK 0x0200 /* IM_ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT1_SHIFT 9 /* IM_ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT1_WIDTH 1 /* IM_ASYNC_CLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT1 0x0100 /* IM_SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT1_MASK 0x0100 /* IM_SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT1_SHIFT 8 /* IM_SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT1_WIDTH 1 /* IM_SYSCLK_ENA_LOW_EINT1 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT1 0x0080 /* IM_ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT1_MASK 0x0080 /* IM_ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT1_SHIFT 7 /* IM_ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT1_WIDTH 1 /* IM_ISRC1_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT1 0x0040 /* IM_ISRC2_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT1_MASK 0x0040 /* IM_ISRC2_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT1_SHIFT 6 /* IM_ISRC2_CFG_ERR_EINT1 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT1_WIDTH 1 /* IM_ISRC2_CFG_ERR_EINT1 */ + +/* + * R3340 (0xD0C) - Interrupt Status 5 Mask + */ +#define ARIZONA_IM_BOOT_DONE_EINT1 0x0100 /* IM_BOOT_DONE_EINT1 */ +#define ARIZONA_IM_BOOT_DONE_EINT1_MASK 0x0100 /* IM_BOOT_DONE_EINT1 */ +#define ARIZONA_IM_BOOT_DONE_EINT1_SHIFT 8 /* IM_BOOT_DONE_EINT1 */ +#define ARIZONA_IM_BOOT_DONE_EINT1_WIDTH 1 /* IM_BOOT_DONE_EINT1 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT1 0x0080 /* IM_DCS_DAC_DONE_EINT1 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT1_MASK 0x0080 /* IM_DCS_DAC_DONE_EINT1 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT1_SHIFT 7 /* IM_DCS_DAC_DONE_EINT1 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT1_WIDTH 1 /* IM_DCS_DAC_DONE_EINT1 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT1 0x0040 /* IM_DCS_HP_DONE_EINT1 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT1_MASK 0x0040 /* IM_DCS_HP_DONE_EINT1 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT1_SHIFT 6 /* IM_DCS_HP_DONE_EINT1 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT1_WIDTH 1 /* IM_DCS_HP_DONE_EINT1 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT1 0x0002 /* IM_FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT1_MASK 0x0002 /* IM_FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT1_SHIFT 1 /* IM_FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT1_WIDTH 1 /* IM_FLL2_CLOCK_OK_EINT1 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT1 0x0001 /* IM_FLL1_CLOCK_OK_EINT1 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT1_MASK 0x0001 /* IM_FLL1_CLOCK_OK_EINT1 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT1_SHIFT 0 /* IM_FLL1_CLOCK_OK_EINT1 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT1_WIDTH 1 /* IM_FLL1_CLOCK_OK_EINT1 */ + +/* + * R3343 (0xD0F) - Interrupt Control + */ +#define ARIZONA_IM_IRQ1 0x0001 /* IM_IRQ1 */ +#define ARIZONA_IM_IRQ1_MASK 0x0001 /* IM_IRQ1 */ +#define ARIZONA_IM_IRQ1_SHIFT 0 /* IM_IRQ1 */ +#define ARIZONA_IM_IRQ1_WIDTH 1 /* IM_IRQ1 */ + +/* + * R3344 (0xD10) - IRQ2 Status 1 + */ +#define ARIZONA_GP4_EINT2 0x0008 /* GP4_EINT2 */ +#define ARIZONA_GP4_EINT2_MASK 0x0008 /* GP4_EINT2 */ +#define ARIZONA_GP4_EINT2_SHIFT 3 /* GP4_EINT2 */ +#define ARIZONA_GP4_EINT2_WIDTH 1 /* GP4_EINT2 */ +#define ARIZONA_GP3_EINT2 0x0004 /* GP3_EINT2 */ +#define ARIZONA_GP3_EINT2_MASK 0x0004 /* GP3_EINT2 */ +#define ARIZONA_GP3_EINT2_SHIFT 2 /* GP3_EINT2 */ +#define ARIZONA_GP3_EINT2_WIDTH 1 /* GP3_EINT2 */ +#define ARIZONA_GP2_EINT2 0x0002 /* GP2_EINT2 */ +#define ARIZONA_GP2_EINT2_MASK 0x0002 /* GP2_EINT2 */ +#define ARIZONA_GP2_EINT2_SHIFT 1 /* GP2_EINT2 */ +#define ARIZONA_GP2_EINT2_WIDTH 1 /* GP2_EINT2 */ +#define ARIZONA_GP1_EINT2 0x0001 /* GP1_EINT2 */ +#define ARIZONA_GP1_EINT2_MASK 0x0001 /* GP1_EINT2 */ +#define ARIZONA_GP1_EINT2_SHIFT 0 /* GP1_EINT2 */ +#define ARIZONA_GP1_EINT2_WIDTH 1 /* GP1_EINT2 */ + +/* + * R3345 (0xD11) - IRQ2 Status 2 + */ +#define ARIZONA_DSP1_RAM_RDY_EINT2 0x0100 /* DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_DSP1_RAM_RDY_EINT2_MASK 0x0100 /* DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_DSP1_RAM_RDY_EINT2_SHIFT 8 /* DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_DSP1_RAM_RDY_EINT2_WIDTH 1 /* DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_DSP_IRQ2_EINT2 0x0002 /* DSP_IRQ2_EINT2 */ +#define ARIZONA_DSP_IRQ2_EINT2_MASK 0x0002 /* DSP_IRQ2_EINT2 */ +#define ARIZONA_DSP_IRQ2_EINT2_SHIFT 1 /* DSP_IRQ2_EINT2 */ +#define ARIZONA_DSP_IRQ2_EINT2_WIDTH 1 /* DSP_IRQ2_EINT2 */ +#define ARIZONA_DSP_IRQ1_EINT2 0x0001 /* DSP_IRQ1_EINT2 */ +#define ARIZONA_DSP_IRQ1_EINT2_MASK 0x0001 /* DSP_IRQ1_EINT2 */ +#define ARIZONA_DSP_IRQ1_EINT2_SHIFT 0 /* DSP_IRQ1_EINT2 */ +#define ARIZONA_DSP_IRQ1_EINT2_WIDTH 1 /* DSP_IRQ1_EINT2 */ + +/* + * R3346 (0xD12) - IRQ2 Status 3 + */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT2 0x8000 /* SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT2_MASK 0x8000 /* SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT2_SHIFT 15 /* SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_SPK_SHUTDOWN_WARN_EINT2_WIDTH 1 /* SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_SPK_SHUTDOWN_EINT2 0x4000 /* SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_SPK_SHUTDOWN_EINT2_MASK 0x4000 /* SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_SPK_SHUTDOWN_EINT2_SHIFT 14 /* SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_SPK_SHUTDOWN_EINT2_WIDTH 1 /* SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_HPDET_EINT2 0x2000 /* HPDET_EINT2 */ +#define ARIZONA_HPDET_EINT2_MASK 0x2000 /* HPDET_EINT2 */ +#define ARIZONA_HPDET_EINT2_SHIFT 13 /* HPDET_EINT2 */ +#define ARIZONA_HPDET_EINT2_WIDTH 1 /* HPDET_EINT2 */ +#define ARIZONA_MICDET_EINT2 0x1000 /* MICDET_EINT2 */ +#define ARIZONA_MICDET_EINT2_MASK 0x1000 /* MICDET_EINT2 */ +#define ARIZONA_MICDET_EINT2_SHIFT 12 /* MICDET_EINT2 */ +#define ARIZONA_MICDET_EINT2_WIDTH 1 /* MICDET_EINT2 */ +#define ARIZONA_WSEQ_DONE_EINT2 0x0800 /* WSEQ_DONE_EINT2 */ +#define ARIZONA_WSEQ_DONE_EINT2_MASK 0x0800 /* WSEQ_DONE_EINT2 */ +#define ARIZONA_WSEQ_DONE_EINT2_SHIFT 11 /* WSEQ_DONE_EINT2 */ +#define ARIZONA_WSEQ_DONE_EINT2_WIDTH 1 /* WSEQ_DONE_EINT2 */ +#define ARIZONA_DRC2_SIG_DET_EINT2 0x0400 /* DRC2_SIG_DET_EINT2 */ +#define ARIZONA_DRC2_SIG_DET_EINT2_MASK 0x0400 /* DRC2_SIG_DET_EINT2 */ +#define ARIZONA_DRC2_SIG_DET_EINT2_SHIFT 10 /* DRC2_SIG_DET_EINT2 */ +#define ARIZONA_DRC2_SIG_DET_EINT2_WIDTH 1 /* DRC2_SIG_DET_EINT2 */ +#define ARIZONA_DRC1_SIG_DET_EINT2 0x0200 /* DRC1_SIG_DET_EINT2 */ +#define ARIZONA_DRC1_SIG_DET_EINT2_MASK 0x0200 /* DRC1_SIG_DET_EINT2 */ +#define ARIZONA_DRC1_SIG_DET_EINT2_SHIFT 9 /* DRC1_SIG_DET_EINT2 */ +#define ARIZONA_DRC1_SIG_DET_EINT2_WIDTH 1 /* DRC1_SIG_DET_EINT2 */ +#define ARIZONA_ASRC2_LOCK_EINT2 0x0100 /* ASRC2_LOCK_EINT2 */ +#define ARIZONA_ASRC2_LOCK_EINT2_MASK 0x0100 /* ASRC2_LOCK_EINT2 */ +#define ARIZONA_ASRC2_LOCK_EINT2_SHIFT 8 /* ASRC2_LOCK_EINT2 */ +#define ARIZONA_ASRC2_LOCK_EINT2_WIDTH 1 /* ASRC2_LOCK_EINT2 */ +#define ARIZONA_ASRC1_LOCK_EINT2 0x0080 /* ASRC1_LOCK_EINT2 */ +#define ARIZONA_ASRC1_LOCK_EINT2_MASK 0x0080 /* ASRC1_LOCK_EINT2 */ +#define ARIZONA_ASRC1_LOCK_EINT2_SHIFT 7 /* ASRC1_LOCK_EINT2 */ +#define ARIZONA_ASRC1_LOCK_EINT2_WIDTH 1 /* ASRC1_LOCK_EINT2 */ +#define ARIZONA_UNDERCLOCKED_EINT2 0x0040 /* UNDERCLOCKED_EINT2 */ +#define ARIZONA_UNDERCLOCKED_EINT2_MASK 0x0040 /* UNDERCLOCKED_EINT2 */ +#define ARIZONA_UNDERCLOCKED_EINT2_SHIFT 6 /* UNDERCLOCKED_EINT2 */ +#define ARIZONA_UNDERCLOCKED_EINT2_WIDTH 1 /* UNDERCLOCKED_EINT2 */ +#define ARIZONA_OVERCLOCKED_EINT2 0x0020 /* OVERCLOCKED_EINT2 */ +#define ARIZONA_OVERCLOCKED_EINT2_MASK 0x0020 /* OVERCLOCKED_EINT2 */ +#define ARIZONA_OVERCLOCKED_EINT2_SHIFT 5 /* OVERCLOCKED_EINT2 */ +#define ARIZONA_OVERCLOCKED_EINT2_WIDTH 1 /* OVERCLOCKED_EINT2 */ +#define ARIZONA_FLL2_LOCK_EINT2 0x0008 /* FLL2_LOCK_EINT2 */ +#define ARIZONA_FLL2_LOCK_EINT2_MASK 0x0008 /* FLL2_LOCK_EINT2 */ +#define ARIZONA_FLL2_LOCK_EINT2_SHIFT 3 /* FLL2_LOCK_EINT2 */ +#define ARIZONA_FLL2_LOCK_EINT2_WIDTH 1 /* FLL2_LOCK_EINT2 */ +#define ARIZONA_FLL1_LOCK_EINT2 0x0004 /* FLL1_LOCK_EINT2 */ +#define ARIZONA_FLL1_LOCK_EINT2_MASK 0x0004 /* FLL1_LOCK_EINT2 */ +#define ARIZONA_FLL1_LOCK_EINT2_SHIFT 2 /* FLL1_LOCK_EINT2 */ +#define ARIZONA_FLL1_LOCK_EINT2_WIDTH 1 /* FLL1_LOCK_EINT2 */ +#define ARIZONA_CLKGEN_ERR_EINT2 0x0002 /* CLKGEN_ERR_EINT2 */ +#define ARIZONA_CLKGEN_ERR_EINT2_MASK 0x0002 /* CLKGEN_ERR_EINT2 */ +#define ARIZONA_CLKGEN_ERR_EINT2_SHIFT 1 /* CLKGEN_ERR_EINT2 */ +#define ARIZONA_CLKGEN_ERR_EINT2_WIDTH 1 /* CLKGEN_ERR_EINT2 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT2 0x0001 /* CLKGEN_ERR_ASYNC_EINT2 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT2_MASK 0x0001 /* CLKGEN_ERR_ASYNC_EINT2 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT2_SHIFT 0 /* CLKGEN_ERR_ASYNC_EINT2 */ +#define ARIZONA_CLKGEN_ERR_ASYNC_EINT2_WIDTH 1 /* CLKGEN_ERR_ASYNC_EINT2 */ + +/* + * R3347 (0xD13) - IRQ2 Status 4 + */ +#define ARIZONA_ASRC_CFG_ERR_EINT2 0x8000 /* ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_ASRC_CFG_ERR_EINT2_MASK 0x8000 /* ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_ASRC_CFG_ERR_EINT2_SHIFT 15 /* ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_ASRC_CFG_ERR_EINT2_WIDTH 1 /* ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_AIF3_ERR_EINT2 0x4000 /* AIF3_ERR_EINT2 */ +#define ARIZONA_AIF3_ERR_EINT2_MASK 0x4000 /* AIF3_ERR_EINT2 */ +#define ARIZONA_AIF3_ERR_EINT2_SHIFT 14 /* AIF3_ERR_EINT2 */ +#define ARIZONA_AIF3_ERR_EINT2_WIDTH 1 /* AIF3_ERR_EINT2 */ +#define ARIZONA_AIF2_ERR_EINT2 0x2000 /* AIF2_ERR_EINT2 */ +#define ARIZONA_AIF2_ERR_EINT2_MASK 0x2000 /* AIF2_ERR_EINT2 */ +#define ARIZONA_AIF2_ERR_EINT2_SHIFT 13 /* AIF2_ERR_EINT2 */ +#define ARIZONA_AIF2_ERR_EINT2_WIDTH 1 /* AIF2_ERR_EINT2 */ +#define ARIZONA_AIF1_ERR_EINT2 0x1000 /* AIF1_ERR_EINT2 */ +#define ARIZONA_AIF1_ERR_EINT2_MASK 0x1000 /* AIF1_ERR_EINT2 */ +#define ARIZONA_AIF1_ERR_EINT2_SHIFT 12 /* AIF1_ERR_EINT2 */ +#define ARIZONA_AIF1_ERR_EINT2_WIDTH 1 /* AIF1_ERR_EINT2 */ +#define ARIZONA_CTRLIF_ERR_EINT2 0x0800 /* CTRLIF_ERR_EINT2 */ +#define ARIZONA_CTRLIF_ERR_EINT2_MASK 0x0800 /* CTRLIF_ERR_EINT2 */ +#define ARIZONA_CTRLIF_ERR_EINT2_SHIFT 11 /* CTRLIF_ERR_EINT2 */ +#define ARIZONA_CTRLIF_ERR_EINT2_WIDTH 1 /* CTRLIF_ERR_EINT2 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT2 0x0400 /* MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT2_MASK 0x0400 /* MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT2_SHIFT 10 /* MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_EINT2_WIDTH 1 /* MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT2 0x0200 /* ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT2_MASK 0x0200 /* ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT2_SHIFT 9 /* ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_EINT2_WIDTH 1 /* ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT2 0x0100 /* SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT2_MASK 0x0100 /* SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT2_SHIFT 8 /* SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_SYSCLK_ENA_LOW_EINT2_WIDTH 1 /* SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT2 0x0080 /* ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT2_MASK 0x0080 /* ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT2_SHIFT 7 /* ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_ISRC1_CFG_ERR_EINT2_WIDTH 1 /* ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT2 0x0040 /* ISRC2_CFG_ERR_EINT2 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT2_MASK 0x0040 /* ISRC2_CFG_ERR_EINT2 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT2_SHIFT 6 /* ISRC2_CFG_ERR_EINT2 */ +#define ARIZONA_ISRC2_CFG_ERR_EINT2_WIDTH 1 /* ISRC2_CFG_ERR_EINT2 */ + +/* + * R3348 (0xD14) - IRQ2 Status 5 + */ +#define ARIZONA_BOOT_DONE_EINT2 0x0100 /* BOOT_DONE_EINT2 */ +#define ARIZONA_BOOT_DONE_EINT2_MASK 0x0100 /* BOOT_DONE_EINT2 */ +#define ARIZONA_BOOT_DONE_EINT2_SHIFT 8 /* BOOT_DONE_EINT2 */ +#define ARIZONA_BOOT_DONE_EINT2_WIDTH 1 /* BOOT_DONE_EINT2 */ +#define ARIZONA_DCS_DAC_DONE_EINT2 0x0080 /* DCS_DAC_DONE_EINT2 */ +#define ARIZONA_DCS_DAC_DONE_EINT2_MASK 0x0080 /* DCS_DAC_DONE_EINT2 */ +#define ARIZONA_DCS_DAC_DONE_EINT2_SHIFT 7 /* DCS_DAC_DONE_EINT2 */ +#define ARIZONA_DCS_DAC_DONE_EINT2_WIDTH 1 /* DCS_DAC_DONE_EINT2 */ +#define ARIZONA_DCS_HP_DONE_EINT2 0x0040 /* DCS_HP_DONE_EINT2 */ +#define ARIZONA_DCS_HP_DONE_EINT2_MASK 0x0040 /* DCS_HP_DONE_EINT2 */ +#define ARIZONA_DCS_HP_DONE_EINT2_SHIFT 6 /* DCS_HP_DONE_EINT2 */ +#define ARIZONA_DCS_HP_DONE_EINT2_WIDTH 1 /* DCS_HP_DONE_EINT2 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT2 0x0002 /* FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT2_MASK 0x0002 /* FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT2_SHIFT 1 /* FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_FLL2_CLOCK_OK_EINT2_WIDTH 1 /* FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT2 0x0001 /* FLL1_CLOCK_OK_EINT2 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT2_MASK 0x0001 /* FLL1_CLOCK_OK_EINT2 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT2_SHIFT 0 /* FLL1_CLOCK_OK_EINT2 */ +#define ARIZONA_FLL1_CLOCK_OK_EINT2_WIDTH 1 /* FLL1_CLOCK_OK_EINT2 */ + +/* + * R3352 (0xD18) - IRQ2 Status 1 Mask + */ +#define ARIZONA_IM_GP4_EINT2 0x0008 /* IM_GP4_EINT2 */ +#define ARIZONA_IM_GP4_EINT2_MASK 0x0008 /* IM_GP4_EINT2 */ +#define ARIZONA_IM_GP4_EINT2_SHIFT 3 /* IM_GP4_EINT2 */ +#define ARIZONA_IM_GP4_EINT2_WIDTH 1 /* IM_GP4_EINT2 */ +#define ARIZONA_IM_GP3_EINT2 0x0004 /* IM_GP3_EINT2 */ +#define ARIZONA_IM_GP3_EINT2_MASK 0x0004 /* IM_GP3_EINT2 */ +#define ARIZONA_IM_GP3_EINT2_SHIFT 2 /* IM_GP3_EINT2 */ +#define ARIZONA_IM_GP3_EINT2_WIDTH 1 /* IM_GP3_EINT2 */ +#define ARIZONA_IM_GP2_EINT2 0x0002 /* IM_GP2_EINT2 */ +#define ARIZONA_IM_GP2_EINT2_MASK 0x0002 /* IM_GP2_EINT2 */ +#define ARIZONA_IM_GP2_EINT2_SHIFT 1 /* IM_GP2_EINT2 */ +#define ARIZONA_IM_GP2_EINT2_WIDTH 1 /* IM_GP2_EINT2 */ +#define ARIZONA_IM_GP1_EINT2 0x0001 /* IM_GP1_EINT2 */ +#define ARIZONA_IM_GP1_EINT2_MASK 0x0001 /* IM_GP1_EINT2 */ +#define ARIZONA_IM_GP1_EINT2_SHIFT 0 /* IM_GP1_EINT2 */ +#define ARIZONA_IM_GP1_EINT2_WIDTH 1 /* IM_GP1_EINT2 */ + +/* + * R3353 (0xD19) - IRQ2 Status 2 Mask + */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT2 0x0100 /* IM_DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT2_MASK 0x0100 /* IM_DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT2_SHIFT 8 /* IM_DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_IM_DSP1_RAM_RDY_EINT2_WIDTH 1 /* IM_DSP1_RAM_RDY_EINT2 */ +#define ARIZONA_IM_DSP_IRQ2_EINT2 0x0002 /* IM_DSP_IRQ2_EINT2 */ +#define ARIZONA_IM_DSP_IRQ2_EINT2_MASK 0x0002 /* IM_DSP_IRQ2_EINT2 */ +#define ARIZONA_IM_DSP_IRQ2_EINT2_SHIFT 1 /* IM_DSP_IRQ2_EINT2 */ +#define ARIZONA_IM_DSP_IRQ2_EINT2_WIDTH 1 /* IM_DSP_IRQ2_EINT2 */ +#define ARIZONA_IM_DSP_IRQ1_EINT2 0x0001 /* IM_DSP_IRQ1_EINT2 */ +#define ARIZONA_IM_DSP_IRQ1_EINT2_MASK 0x0001 /* IM_DSP_IRQ1_EINT2 */ +#define ARIZONA_IM_DSP_IRQ1_EINT2_SHIFT 0 /* IM_DSP_IRQ1_EINT2 */ +#define ARIZONA_IM_DSP_IRQ1_EINT2_WIDTH 1 /* IM_DSP_IRQ1_EINT2 */ + +/* + * R3354 (0xD1A) - IRQ2 Status 3 Mask + */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT2 0x8000 /* IM_SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT2_MASK 0x8000 /* IM_SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT2_SHIFT 15 /* IM_SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_IM_SPK_SHUTDOWN_WARN_EINT2_WIDTH 1 /* IM_SPK_SHUTDOWN_WARN_EINT2 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT2 0x4000 /* IM_SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT2_MASK 0x4000 /* IM_SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT2_SHIFT 14 /* IM_SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_IM_SPK_SHUTDOWN_EINT2_WIDTH 1 /* IM_SPK_SHUTDOWN_EINT2 */ +#define ARIZONA_IM_HPDET_EINT2 0x2000 /* IM_HPDET_EINT2 */ +#define ARIZONA_IM_HPDET_EINT2_MASK 0x2000 /* IM_HPDET_EINT2 */ +#define ARIZONA_IM_HPDET_EINT2_SHIFT 13 /* IM_HPDET_EINT2 */ +#define ARIZONA_IM_HPDET_EINT2_WIDTH 1 /* IM_HPDET_EINT2 */ +#define ARIZONA_IM_MICDET_EINT2 0x1000 /* IM_MICDET_EINT2 */ +#define ARIZONA_IM_MICDET_EINT2_MASK 0x1000 /* IM_MICDET_EINT2 */ +#define ARIZONA_IM_MICDET_EINT2_SHIFT 12 /* IM_MICDET_EINT2 */ +#define ARIZONA_IM_MICDET_EINT2_WIDTH 1 /* IM_MICDET_EINT2 */ +#define ARIZONA_IM_WSEQ_DONE_EINT2 0x0800 /* IM_WSEQ_DONE_EINT2 */ +#define ARIZONA_IM_WSEQ_DONE_EINT2_MASK 0x0800 /* IM_WSEQ_DONE_EINT2 */ +#define ARIZONA_IM_WSEQ_DONE_EINT2_SHIFT 11 /* IM_WSEQ_DONE_EINT2 */ +#define ARIZONA_IM_WSEQ_DONE_EINT2_WIDTH 1 /* IM_WSEQ_DONE_EINT2 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT2 0x0400 /* IM_DRC2_SIG_DET_EINT2 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT2_MASK 0x0400 /* IM_DRC2_SIG_DET_EINT2 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT2_SHIFT 10 /* IM_DRC2_SIG_DET_EINT2 */ +#define ARIZONA_IM_DRC2_SIG_DET_EINT2_WIDTH 1 /* IM_DRC2_SIG_DET_EINT2 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT2 0x0200 /* IM_DRC1_SIG_DET_EINT2 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT2_MASK 0x0200 /* IM_DRC1_SIG_DET_EINT2 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT2_SHIFT 9 /* IM_DRC1_SIG_DET_EINT2 */ +#define ARIZONA_IM_DRC1_SIG_DET_EINT2_WIDTH 1 /* IM_DRC1_SIG_DET_EINT2 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT2 0x0100 /* IM_ASRC2_LOCK_EINT2 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT2_MASK 0x0100 /* IM_ASRC2_LOCK_EINT2 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT2_SHIFT 8 /* IM_ASRC2_LOCK_EINT2 */ +#define ARIZONA_IM_ASRC2_LOCK_EINT2_WIDTH 1 /* IM_ASRC2_LOCK_EINT2 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT2 0x0080 /* IM_ASRC1_LOCK_EINT2 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT2_MASK 0x0080 /* IM_ASRC1_LOCK_EINT2 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT2_SHIFT 7 /* IM_ASRC1_LOCK_EINT2 */ +#define ARIZONA_IM_ASRC1_LOCK_EINT2_WIDTH 1 /* IM_ASRC1_LOCK_EINT2 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT2 0x0040 /* IM_UNDERCLOCKED_EINT2 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT2_MASK 0x0040 /* IM_UNDERCLOCKED_EINT2 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT2_SHIFT 6 /* IM_UNDERCLOCKED_EINT2 */ +#define ARIZONA_IM_UNDERCLOCKED_EINT2_WIDTH 1 /* IM_UNDERCLOCKED_EINT2 */ +#define ARIZONA_IM_OVERCLOCKED_EINT2 0x0020 /* IM_OVERCLOCKED_EINT2 */ +#define ARIZONA_IM_OVERCLOCKED_EINT2_MASK 0x0020 /* IM_OVERCLOCKED_EINT2 */ +#define ARIZONA_IM_OVERCLOCKED_EINT2_SHIFT 5 /* IM_OVERCLOCKED_EINT2 */ +#define ARIZONA_IM_OVERCLOCKED_EINT2_WIDTH 1 /* IM_OVERCLOCKED_EINT2 */ +#define ARIZONA_IM_FLL2_LOCK_EINT2 0x0008 /* IM_FLL2_LOCK_EINT2 */ +#define ARIZONA_IM_FLL2_LOCK_EINT2_MASK 0x0008 /* IM_FLL2_LOCK_EINT2 */ +#define ARIZONA_IM_FLL2_LOCK_EINT2_SHIFT 3 /* IM_FLL2_LOCK_EINT2 */ +#define ARIZONA_IM_FLL2_LOCK_EINT2_WIDTH 1 /* IM_FLL2_LOCK_EINT2 */ +#define ARIZONA_IM_FLL1_LOCK_EINT2 0x0004 /* IM_FLL1_LOCK_EINT2 */ +#define ARIZONA_IM_FLL1_LOCK_EINT2_MASK 0x0004 /* IM_FLL1_LOCK_EINT2 */ +#define ARIZONA_IM_FLL1_LOCK_EINT2_SHIFT 2 /* IM_FLL1_LOCK_EINT2 */ +#define ARIZONA_IM_FLL1_LOCK_EINT2_WIDTH 1 /* IM_FLL1_LOCK_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT2 0x0002 /* IM_CLKGEN_ERR_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT2_MASK 0x0002 /* IM_CLKGEN_ERR_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT2_SHIFT 1 /* IM_CLKGEN_ERR_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_EINT2_WIDTH 1 /* IM_CLKGEN_ERR_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT2 0x0001 /* IM_CLKGEN_ERR_ASYNC_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT2_MASK 0x0001 /* IM_CLKGEN_ERR_ASYNC_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT2_SHIFT 0 /* IM_CLKGEN_ERR_ASYNC_EINT2 */ +#define ARIZONA_IM_CLKGEN_ERR_ASYNC_EINT2_WIDTH 1 /* IM_CLKGEN_ERR_ASYNC_EINT2 */ + +/* + * R3355 (0xD1B) - IRQ2 Status 4 Mask + */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT2 0x8000 /* IM_ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT2_MASK 0x8000 /* IM_ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT2_SHIFT 15 /* IM_ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ASRC_CFG_ERR_EINT2_WIDTH 1 /* IM_ASRC_CFG_ERR_EINT2 */ +#define ARIZONA_IM_AIF3_ERR_EINT2 0x4000 /* IM_AIF3_ERR_EINT2 */ +#define ARIZONA_IM_AIF3_ERR_EINT2_MASK 0x4000 /* IM_AIF3_ERR_EINT2 */ +#define ARIZONA_IM_AIF3_ERR_EINT2_SHIFT 14 /* IM_AIF3_ERR_EINT2 */ +#define ARIZONA_IM_AIF3_ERR_EINT2_WIDTH 1 /* IM_AIF3_ERR_EINT2 */ +#define ARIZONA_IM_AIF2_ERR_EINT2 0x2000 /* IM_AIF2_ERR_EINT2 */ +#define ARIZONA_IM_AIF2_ERR_EINT2_MASK 0x2000 /* IM_AIF2_ERR_EINT2 */ +#define ARIZONA_IM_AIF2_ERR_EINT2_SHIFT 13 /* IM_AIF2_ERR_EINT2 */ +#define ARIZONA_IM_AIF2_ERR_EINT2_WIDTH 1 /* IM_AIF2_ERR_EINT2 */ +#define ARIZONA_IM_AIF1_ERR_EINT2 0x1000 /* IM_AIF1_ERR_EINT2 */ +#define ARIZONA_IM_AIF1_ERR_EINT2_MASK 0x1000 /* IM_AIF1_ERR_EINT2 */ +#define ARIZONA_IM_AIF1_ERR_EINT2_SHIFT 12 /* IM_AIF1_ERR_EINT2 */ +#define ARIZONA_IM_AIF1_ERR_EINT2_WIDTH 1 /* IM_AIF1_ERR_EINT2 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT2 0x0800 /* IM_CTRLIF_ERR_EINT2 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT2_MASK 0x0800 /* IM_CTRLIF_ERR_EINT2 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT2_SHIFT 11 /* IM_CTRLIF_ERR_EINT2 */ +#define ARIZONA_IM_CTRLIF_ERR_EINT2_WIDTH 1 /* IM_CTRLIF_ERR_EINT2 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT2 0x0400 /* IM_MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT2_MASK 0x0400 /* IM_MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT2_SHIFT 10 /* IM_MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_IM_MIXER_DROPPED_SAMPLE_EINT2_WIDTH 1 /* IM_MIXER_DROPPED_SAMPLE_EINT2 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT2 0x0200 /* IM_ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT2_MASK 0x0200 /* IM_ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT2_SHIFT 9 /* IM_ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_ASYNC_CLK_ENA_LOW_EINT2_WIDTH 1 /* IM_ASYNC_CLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT2 0x0100 /* IM_SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT2_MASK 0x0100 /* IM_SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT2_SHIFT 8 /* IM_SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_SYSCLK_ENA_LOW_EINT2_WIDTH 1 /* IM_SYSCLK_ENA_LOW_EINT2 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT2 0x0080 /* IM_ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT2_MASK 0x0080 /* IM_ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT2_SHIFT 7 /* IM_ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ISRC1_CFG_ERR_EINT2_WIDTH 1 /* IM_ISRC1_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT2 0x0040 /* IM_ISRC2_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT2_MASK 0x0040 /* IM_ISRC2_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT2_SHIFT 6 /* IM_ISRC2_CFG_ERR_EINT2 */ +#define ARIZONA_IM_ISRC2_CFG_ERR_EINT2_WIDTH 1 /* IM_ISRC2_CFG_ERR_EINT2 */ + +/* + * R3356 (0xD1C) - IRQ2 Status 5 Mask + */ + +#define ARIZONA_IM_BOOT_DONE_EINT2 0x0100 /* IM_BOOT_DONE_EINT2 */ +#define ARIZONA_IM_BOOT_DONE_EINT2_MASK 0x0100 /* IM_BOOT_DONE_EINT2 */ +#define ARIZONA_IM_BOOT_DONE_EINT2_SHIFT 8 /* IM_BOOT_DONE_EINT2 */ +#define ARIZONA_IM_BOOT_DONE_EINT2_WIDTH 1 /* IM_BOOT_DONE_EINT2 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT2 0x0080 /* IM_DCS_DAC_DONE_EINT2 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT2_MASK 0x0080 /* IM_DCS_DAC_DONE_EINT2 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT2_SHIFT 7 /* IM_DCS_DAC_DONE_EINT2 */ +#define ARIZONA_IM_DCS_DAC_DONE_EINT2_WIDTH 1 /* IM_DCS_DAC_DONE_EINT2 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT2 0x0040 /* IM_DCS_HP_DONE_EINT2 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT2_MASK 0x0040 /* IM_DCS_HP_DONE_EINT2 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT2_SHIFT 6 /* IM_DCS_HP_DONE_EINT2 */ +#define ARIZONA_IM_DCS_HP_DONE_EINT2_WIDTH 1 /* IM_DCS_HP_DONE_EINT2 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT2 0x0002 /* IM_FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT2_MASK 0x0002 /* IM_FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT2_SHIFT 1 /* IM_FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_IM_FLL2_CLOCK_OK_EINT2_WIDTH 1 /* IM_FLL2_CLOCK_OK_EINT2 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT2 0x0001 /* IM_FLL1_CLOCK_OK_EINT2 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT2_MASK 0x0001 /* IM_FLL1_CLOCK_OK_EINT2 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT2_SHIFT 0 /* IM_FLL1_CLOCK_OK_EINT2 */ +#define ARIZONA_IM_FLL1_CLOCK_OK_EINT2_WIDTH 1 /* IM_FLL1_CLOCK_OK_EINT2 */ + +/* + * R3359 (0xD1F) - IRQ2 Control + */ +#define ARIZONA_IM_IRQ2 0x0001 /* IM_IRQ2 */ +#define ARIZONA_IM_IRQ2_MASK 0x0001 /* IM_IRQ2 */ +#define ARIZONA_IM_IRQ2_SHIFT 0 /* IM_IRQ2 */ +#define ARIZONA_IM_IRQ2_WIDTH 1 /* IM_IRQ2 */ + +/* + * R3360 (0xD20) - Interrupt Raw Status 2 + */ +#define ARIZONA_DSP1_RAM_RDY_STS 0x0100 /* DSP1_RAM_RDY_STS */ +#define ARIZONA_DSP1_RAM_RDY_STS_MASK 0x0100 /* DSP1_RAM_RDY_STS */ +#define ARIZONA_DSP1_RAM_RDY_STS_SHIFT 8 /* DSP1_RAM_RDY_STS */ +#define ARIZONA_DSP1_RAM_RDY_STS_WIDTH 1 /* DSP1_RAM_RDY_STS */ +#define ARIZONA_DSP_IRQ2_STS 0x0002 /* DSP_IRQ2_STS */ +#define ARIZONA_DSP_IRQ2_STS_MASK 0x0002 /* DSP_IRQ2_STS */ +#define ARIZONA_DSP_IRQ2_STS_SHIFT 1 /* DSP_IRQ2_STS */ +#define ARIZONA_DSP_IRQ2_STS_WIDTH 1 /* DSP_IRQ2_STS */ +#define ARIZONA_DSP_IRQ1_STS 0x0001 /* DSP_IRQ1_STS */ +#define ARIZONA_DSP_IRQ1_STS_MASK 0x0001 /* DSP_IRQ1_STS */ +#define ARIZONA_DSP_IRQ1_STS_SHIFT 0 /* DSP_IRQ1_STS */ +#define ARIZONA_DSP_IRQ1_STS_WIDTH 1 /* DSP_IRQ1_STS */ + +/* + * R3361 (0xD21) - Interrupt Raw Status 3 + */ +#define ARIZONA_SPK_SHUTDOWN_WARN_STS 0x8000 /* SPK_SHUTDOWN_WARN_STS */ +#define ARIZONA_SPK_SHUTDOWN_WARN_STS_MASK 0x8000 /* SPK_SHUTDOWN_WARN_STS */ +#define ARIZONA_SPK_SHUTDOWN_WARN_STS_SHIFT 15 /* SPK_SHUTDOWN_WARN_STS */ +#define ARIZONA_SPK_SHUTDOWN_WARN_STS_WIDTH 1 /* SPK_SHUTDOWN_WARN_STS */ +#define ARIZONA_SPK_SHUTDOWN_STS 0x4000 /* SPK_SHUTDOWN_STS */ +#define ARIZONA_SPK_SHUTDOWN_STS_MASK 0x4000 /* SPK_SHUTDOWN_STS */ +#define ARIZONA_SPK_SHUTDOWN_STS_SHIFT 14 /* SPK_SHUTDOWN_STS */ +#define ARIZONA_SPK_SHUTDOWN_STS_WIDTH 1 /* SPK_SHUTDOWN_STS */ +#define ARIZONA_HPDET_STS 0x2000 /* HPDET_STS */ +#define ARIZONA_HPDET_STS_MASK 0x2000 /* HPDET_STS */ +#define ARIZONA_HPDET_STS_SHIFT 13 /* HPDET_STS */ +#define ARIZONA_HPDET_STS_WIDTH 1 /* HPDET_STS */ +#define ARIZONA_MICDET_STS 0x1000 /* MICDET_STS */ +#define ARIZONA_MICDET_STS_MASK 0x1000 /* MICDET_STS */ +#define ARIZONA_MICDET_STS_SHIFT 12 /* MICDET_STS */ +#define ARIZONA_MICDET_STS_WIDTH 1 /* MICDET_STS */ +#define ARIZONA_WSEQ_DONE_STS 0x0800 /* WSEQ_DONE_STS */ +#define ARIZONA_WSEQ_DONE_STS_MASK 0x0800 /* WSEQ_DONE_STS */ +#define ARIZONA_WSEQ_DONE_STS_SHIFT 11 /* WSEQ_DONE_STS */ +#define ARIZONA_WSEQ_DONE_STS_WIDTH 1 /* WSEQ_DONE_STS */ +#define ARIZONA_DRC2_SIG_DET_STS 0x0400 /* DRC2_SIG_DET_STS */ +#define ARIZONA_DRC2_SIG_DET_STS_MASK 0x0400 /* DRC2_SIG_DET_STS */ +#define ARIZONA_DRC2_SIG_DET_STS_SHIFT 10 /* DRC2_SIG_DET_STS */ +#define ARIZONA_DRC2_SIG_DET_STS_WIDTH 1 /* DRC2_SIG_DET_STS */ +#define ARIZONA_DRC1_SIG_DET_STS 0x0200 /* DRC1_SIG_DET_STS */ +#define ARIZONA_DRC1_SIG_DET_STS_MASK 0x0200 /* DRC1_SIG_DET_STS */ +#define ARIZONA_DRC1_SIG_DET_STS_SHIFT 9 /* DRC1_SIG_DET_STS */ +#define ARIZONA_DRC1_SIG_DET_STS_WIDTH 1 /* DRC1_SIG_DET_STS */ +#define ARIZONA_ASRC2_LOCK_STS 0x0100 /* ASRC2_LOCK_STS */ +#define ARIZONA_ASRC2_LOCK_STS_MASK 0x0100 /* ASRC2_LOCK_STS */ +#define ARIZONA_ASRC2_LOCK_STS_SHIFT 8 /* ASRC2_LOCK_STS */ +#define ARIZONA_ASRC2_LOCK_STS_WIDTH 1 /* ASRC2_LOCK_STS */ +#define ARIZONA_ASRC1_LOCK_STS 0x0080 /* ASRC1_LOCK_STS */ +#define ARIZONA_ASRC1_LOCK_STS_MASK 0x0080 /* ASRC1_LOCK_STS */ +#define ARIZONA_ASRC1_LOCK_STS_SHIFT 7 /* ASRC1_LOCK_STS */ +#define ARIZONA_ASRC1_LOCK_STS_WIDTH 1 /* ASRC1_LOCK_STS */ +#define ARIZONA_UNDERCLOCKED_STS 0x0040 /* UNDERCLOCKED_STS */ +#define ARIZONA_UNDERCLOCKED_STS_MASK 0x0040 /* UNDERCLOCKED_STS */ +#define ARIZONA_UNDERCLOCKED_STS_SHIFT 6 /* UNDERCLOCKED_STS */ +#define ARIZONA_UNDERCLOCKED_STS_WIDTH 1 /* UNDERCLOCKED_STS */ +#define ARIZONA_OVERCLOCKED_STS 0x0020 /* OVERCLOCKED_STS */ +#define ARIZONA_OVERCLOCKED_STS_MASK 0x0020 /* OVERCLOCKED_STS */ +#define ARIZONA_OVERCLOCKED_STS_SHIFT 5 /* OVERCLOCKED_STS */ +#define ARIZONA_OVERCLOCKED_STS_WIDTH 1 /* OVERCLOCKED_STS */ +#define ARIZONA_FLL2_LOCK_STS 0x0008 /* FLL2_LOCK_STS */ +#define ARIZONA_FLL2_LOCK_STS_MASK 0x0008 /* FLL2_LOCK_STS */ +#define ARIZONA_FLL2_LOCK_STS_SHIFT 3 /* FLL2_LOCK_STS */ +#define ARIZONA_FLL2_LOCK_STS_WIDTH 1 /* FLL2_LOCK_STS */ +#define ARIZONA_FLL1_LOCK_STS 0x0004 /* FLL1_LOCK_STS */ +#define ARIZONA_FLL1_LOCK_STS_MASK 0x0004 /* FLL1_LOCK_STS */ +#define ARIZONA_FLL1_LOCK_STS_SHIFT 2 /* FLL1_LOCK_STS */ +#define ARIZONA_FLL1_LOCK_STS_WIDTH 1 /* FLL1_LOCK_STS */ +#define ARIZONA_CLKGEN_ERR_STS 0x0002 /* CLKGEN_ERR_STS */ +#define ARIZONA_CLKGEN_ERR_STS_MASK 0x0002 /* CLKGEN_ERR_STS */ +#define ARIZONA_CLKGEN_ERR_STS_SHIFT 1 /* CLKGEN_ERR_STS */ +#define ARIZONA_CLKGEN_ERR_STS_WIDTH 1 /* CLKGEN_ERR_STS */ +#define ARIZONA_CLKGEN_ERR_ASYNC_STS 0x0001 /* CLKGEN_ERR_ASYNC_STS */ +#define ARIZONA_CLKGEN_ERR_ASYNC_STS_MASK 0x0001 /* CLKGEN_ERR_ASYNC_STS */ +#define ARIZONA_CLKGEN_ERR_ASYNC_STS_SHIFT 0 /* CLKGEN_ERR_ASYNC_STS */ +#define ARIZONA_CLKGEN_ERR_ASYNC_STS_WIDTH 1 /* CLKGEN_ERR_ASYNC_STS */ + +/* + * R3362 (0xD22) - Interrupt Raw Status 4 + */ +#define ARIZONA_ASRC_CFG_ERR_STS 0x8000 /* ASRC_CFG_ERR_STS */ +#define ARIZONA_ASRC_CFG_ERR_STS_MASK 0x8000 /* ASRC_CFG_ERR_STS */ +#define ARIZONA_ASRC_CFG_ERR_STS_SHIFT 15 /* ASRC_CFG_ERR_STS */ +#define ARIZONA_ASRC_CFG_ERR_STS_WIDTH 1 /* ASRC_CFG_ERR_STS */ +#define ARIZONA_AIF3_ERR_STS 0x4000 /* AIF3_ERR_STS */ +#define ARIZONA_AIF3_ERR_STS_MASK 0x4000 /* AIF3_ERR_STS */ +#define ARIZONA_AIF3_ERR_STS_SHIFT 14 /* AIF3_ERR_STS */ +#define ARIZONA_AIF3_ERR_STS_WIDTH 1 /* AIF3_ERR_STS */ +#define ARIZONA_AIF2_ERR_STS 0x2000 /* AIF2_ERR_STS */ +#define ARIZONA_AIF2_ERR_STS_MASK 0x2000 /* AIF2_ERR_STS */ +#define ARIZONA_AIF2_ERR_STS_SHIFT 13 /* AIF2_ERR_STS */ +#define ARIZONA_AIF2_ERR_STS_WIDTH 1 /* AIF2_ERR_STS */ +#define ARIZONA_AIF1_ERR_STS 0x1000 /* AIF1_ERR_STS */ +#define ARIZONA_AIF1_ERR_STS_MASK 0x1000 /* AIF1_ERR_STS */ +#define ARIZONA_AIF1_ERR_STS_SHIFT 12 /* AIF1_ERR_STS */ +#define ARIZONA_AIF1_ERR_STS_WIDTH 1 /* AIF1_ERR_STS */ +#define ARIZONA_CTRLIF_ERR_STS 0x0800 /* CTRLIF_ERR_STS */ +#define ARIZONA_CTRLIF_ERR_STS_MASK 0x0800 /* CTRLIF_ERR_STS */ +#define ARIZONA_CTRLIF_ERR_STS_SHIFT 11 /* CTRLIF_ERR_STS */ +#define ARIZONA_CTRLIF_ERR_STS_WIDTH 1 /* CTRLIF_ERR_STS */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_STS 0x0400 /* MIXER_DROPPED_SAMPLE_STS */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_STS_MASK 0x0400 /* MIXER_DROPPED_SAMPLE_STS */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_STS_SHIFT 10 /* MIXER_DROPPED_SAMPLE_STS */ +#define ARIZONA_MIXER_DROPPED_SAMPLE_STS_WIDTH 1 /* MIXER_DROPPED_SAMPLE_STS */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_STS 0x0200 /* ASYNC_CLK_ENA_LOW_STS */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_STS_MASK 0x0200 /* ASYNC_CLK_ENA_LOW_STS */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_STS_SHIFT 9 /* ASYNC_CLK_ENA_LOW_STS */ +#define ARIZONA_ASYNC_CLK_ENA_LOW_STS_WIDTH 1 /* ASYNC_CLK_ENA_LOW_STS */ +#define ARIZONA_SYSCLK_ENA_LOW_STS 0x0100 /* SYSCLK_ENA_LOW_STS */ +#define ARIZONA_SYSCLK_ENA_LOW_STS_MASK 0x0100 /* SYSCLK_ENA_LOW_STS */ +#define ARIZONA_SYSCLK_ENA_LOW_STS_SHIFT 8 /* SYSCLK_ENA_LOW_STS */ +#define ARIZONA_SYSCLK_ENA_LOW_STS_WIDTH 1 /* SYSCLK_ENA_LOW_STS */ +#define ARIZONA_ISRC1_CFG_ERR_STS 0x0080 /* ISRC1_CFG_ERR_STS */ +#define ARIZONA_ISRC1_CFG_ERR_STS_MASK 0x0080 /* ISRC1_CFG_ERR_STS */ +#define ARIZONA_ISRC1_CFG_ERR_STS_SHIFT 7 /* ISRC1_CFG_ERR_STS */ +#define ARIZONA_ISRC1_CFG_ERR_STS_WIDTH 1 /* ISRC1_CFG_ERR_STS */ +#define ARIZONA_ISRC2_CFG_ERR_STS 0x0040 /* ISRC2_CFG_ERR_STS */ +#define ARIZONA_ISRC2_CFG_ERR_STS_MASK 0x0040 /* ISRC2_CFG_ERR_STS */ +#define ARIZONA_ISRC2_CFG_ERR_STS_SHIFT 6 /* ISRC2_CFG_ERR_STS */ +#define ARIZONA_ISRC2_CFG_ERR_STS_WIDTH 1 /* ISRC2_CFG_ERR_STS */ + +/* + * R3363 (0xD23) - Interrupt Raw Status 5 + */ +#define ARIZONA_BOOT_DONE_STS 0x0100 /* BOOT_DONE_STS */ +#define ARIZONA_BOOT_DONE_STS_MASK 0x0100 /* BOOT_DONE_STS */ +#define ARIZONA_BOOT_DONE_STS_SHIFT 8 /* BOOT_DONE_STS */ +#define ARIZONA_BOOT_DONE_STS_WIDTH 1 /* BOOT_DONE_STS */ +#define ARIZONA_DCS_DAC_DONE_STS 0x0080 /* DCS_DAC_DONE_STS */ +#define ARIZONA_DCS_DAC_DONE_STS_MASK 0x0080 /* DCS_DAC_DONE_STS */ +#define ARIZONA_DCS_DAC_DONE_STS_SHIFT 7 /* DCS_DAC_DONE_STS */ +#define ARIZONA_DCS_DAC_DONE_STS_WIDTH 1 /* DCS_DAC_DONE_STS */ +#define ARIZONA_DCS_HP_DONE_STS 0x0040 /* DCS_HP_DONE_STS */ +#define ARIZONA_DCS_HP_DONE_STS_MASK 0x0040 /* DCS_HP_DONE_STS */ +#define ARIZONA_DCS_HP_DONE_STS_SHIFT 6 /* DCS_HP_DONE_STS */ +#define ARIZONA_DCS_HP_DONE_STS_WIDTH 1 /* DCS_HP_DONE_STS */ +#define ARIZONA_FLL2_CLOCK_OK_STS 0x0002 /* FLL2_CLOCK_OK_STS */ +#define ARIZONA_FLL2_CLOCK_OK_STS_MASK 0x0002 /* FLL2_CLOCK_OK_STS */ +#define ARIZONA_FLL2_CLOCK_OK_STS_SHIFT 1 /* FLL2_CLOCK_OK_STS */ +#define ARIZONA_FLL2_CLOCK_OK_STS_WIDTH 1 /* FLL2_CLOCK_OK_STS */ +#define ARIZONA_FLL1_CLOCK_OK_STS 0x0001 /* FLL1_CLOCK_OK_STS */ +#define ARIZONA_FLL1_CLOCK_OK_STS_MASK 0x0001 /* FLL1_CLOCK_OK_STS */ +#define ARIZONA_FLL1_CLOCK_OK_STS_SHIFT 0 /* FLL1_CLOCK_OK_STS */ +#define ARIZONA_FLL1_CLOCK_OK_STS_WIDTH 1 /* FLL1_CLOCK_OK_STS */ + +/* + * R3364 (0xD24) - Interrupt Raw Status 6 + */ +#define ARIZONA_PWM_OVERCLOCKED_STS 0x2000 /* PWM_OVERCLOCKED_STS */ +#define ARIZONA_PWM_OVERCLOCKED_STS_MASK 0x2000 /* PWM_OVERCLOCKED_STS */ +#define ARIZONA_PWM_OVERCLOCKED_STS_SHIFT 13 /* PWM_OVERCLOCKED_STS */ +#define ARIZONA_PWM_OVERCLOCKED_STS_WIDTH 1 /* PWM_OVERCLOCKED_STS */ +#define ARIZONA_FX_CORE_OVERCLOCKED_STS 0x1000 /* FX_CORE_OVERCLOCKED_STS */ +#define ARIZONA_FX_CORE_OVERCLOCKED_STS_MASK 0x1000 /* FX_CORE_OVERCLOCKED_STS */ +#define ARIZONA_FX_CORE_OVERCLOCKED_STS_SHIFT 12 /* FX_CORE_OVERCLOCKED_STS */ +#define ARIZONA_FX_CORE_OVERCLOCKED_STS_WIDTH 1 /* FX_CORE_OVERCLOCKED_STS */ +#define ARIZONA_DAC_SYS_OVERCLOCKED_STS 0x0400 /* DAC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_DAC_SYS_OVERCLOCKED_STS_MASK 0x0400 /* DAC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_DAC_SYS_OVERCLOCKED_STS_SHIFT 10 /* DAC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_DAC_SYS_OVERCLOCKED_STS_WIDTH 1 /* DAC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_DAC_WARP_OVERCLOCKED_STS 0x0200 /* DAC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_DAC_WARP_OVERCLOCKED_STS_MASK 0x0200 /* DAC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_DAC_WARP_OVERCLOCKED_STS_SHIFT 9 /* DAC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_DAC_WARP_OVERCLOCKED_STS_WIDTH 1 /* DAC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ADC_OVERCLOCKED_STS 0x0100 /* ADC_OVERCLOCKED_STS */ +#define ARIZONA_ADC_OVERCLOCKED_STS_MASK 0x0100 /* ADC_OVERCLOCKED_STS */ +#define ARIZONA_ADC_OVERCLOCKED_STS_SHIFT 8 /* ADC_OVERCLOCKED_STS */ +#define ARIZONA_ADC_OVERCLOCKED_STS_WIDTH 1 /* ADC_OVERCLOCKED_STS */ +#define ARIZONA_MIXER_OVERCLOCKED_STS 0x0080 /* MIXER_OVERCLOCKED_STS */ +#define ARIZONA_MIXER_OVERCLOCKED_STS_MASK 0x0080 /* MIXER_OVERCLOCKED_STS */ +#define ARIZONA_MIXER_OVERCLOCKED_STS_SHIFT 7 /* MIXER_OVERCLOCKED_STS */ +#define ARIZONA_MIXER_OVERCLOCKED_STS_WIDTH 1 /* MIXER_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_ASYNC_OVERCLOCKED_STS 0x0040 /* AIF3_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_ASYNC_OVERCLOCKED_STS_MASK 0x0040 /* AIF3_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_ASYNC_OVERCLOCKED_STS_SHIFT 6 /* AIF3_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_ASYNC_OVERCLOCKED_STS_WIDTH 1 /* AIF3_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_ASYNC_OVERCLOCKED_STS 0x0020 /* AIF2_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_ASYNC_OVERCLOCKED_STS_MASK 0x0020 /* AIF2_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_ASYNC_OVERCLOCKED_STS_SHIFT 5 /* AIF2_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_ASYNC_OVERCLOCKED_STS_WIDTH 1 /* AIF2_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_ASYNC_OVERCLOCKED_STS 0x0010 /* AIF1_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_ASYNC_OVERCLOCKED_STS_MASK 0x0010 /* AIF1_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_ASYNC_OVERCLOCKED_STS_SHIFT 4 /* AIF1_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_ASYNC_OVERCLOCKED_STS_WIDTH 1 /* AIF1_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_SYNC_OVERCLOCKED_STS 0x0008 /* AIF3_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_SYNC_OVERCLOCKED_STS_MASK 0x0008 /* AIF3_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_SYNC_OVERCLOCKED_STS_SHIFT 3 /* AIF3_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF3_SYNC_OVERCLOCKED_STS_WIDTH 1 /* AIF3_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_SYNC_OVERCLOCKED_STS 0x0004 /* AIF2_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_SYNC_OVERCLOCKED_STS_MASK 0x0004 /* AIF2_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_SYNC_OVERCLOCKED_STS_SHIFT 2 /* AIF2_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF2_SYNC_OVERCLOCKED_STS_WIDTH 1 /* AIF2_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_SYNC_OVERCLOCKED_STS 0x0002 /* AIF1_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_SYNC_OVERCLOCKED_STS_MASK 0x0002 /* AIF1_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_SYNC_OVERCLOCKED_STS_SHIFT 1 /* AIF1_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_AIF1_SYNC_OVERCLOCKED_STS_WIDTH 1 /* AIF1_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_PAD_CTRL_OVERCLOCKED_STS 0x0001 /* PAD_CTRL_OVERCLOCKED_STS */ +#define ARIZONA_PAD_CTRL_OVERCLOCKED_STS_MASK 0x0001 /* PAD_CTRL_OVERCLOCKED_STS */ +#define ARIZONA_PAD_CTRL_OVERCLOCKED_STS_SHIFT 0 /* PAD_CTRL_OVERCLOCKED_STS */ +#define ARIZONA_PAD_CTRL_OVERCLOCKED_STS_WIDTH 1 /* PAD_CTRL_OVERCLOCKED_STS */ + +/* + * R3365 (0xD25) - Interrupt Raw Status 7 + */ +#define ARIZONA_SLIMBUS_SUBSYS_OVERCLOCKED_STS 0x8000 /* SLIMBUS_SUBSYS_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_SUBSYS_OVERCLOCKED_STS_MASK 0x8000 /* SLIMBUS_SUBSYS_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_SUBSYS_OVERCLOCKED_STS_SHIFT 15 /* SLIMBUS_SUBSYS_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_SUBSYS_OVERCLOCKED_STS_WIDTH 1 /* SLIMBUS_SUBSYS_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_ASYNC_OVERCLOCKED_STS 0x4000 /* SLIMBUS_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_ASYNC_OVERCLOCKED_STS_MASK 0x4000 /* SLIMBUS_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_ASYNC_OVERCLOCKED_STS_SHIFT 14 /* SLIMBUS_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_ASYNC_OVERCLOCKED_STS_WIDTH 1 /* SLIMBUS_ASYNC_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_SYNC_OVERCLOCKED_STS 0x2000 /* SLIMBUS_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_SYNC_OVERCLOCKED_STS_MASK 0x2000 /* SLIMBUS_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_SYNC_OVERCLOCKED_STS_SHIFT 13 /* SLIMBUS_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_SLIMBUS_SYNC_OVERCLOCKED_STS_WIDTH 1 /* SLIMBUS_SYNC_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_SYS_OVERCLOCKED_STS 0x1000 /* ASRC_ASYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_SYS_OVERCLOCKED_STS_MASK 0x1000 /* ASRC_ASYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_SYS_OVERCLOCKED_STS_SHIFT 12 /* ASRC_ASYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_SYS_OVERCLOCKED_STS_WIDTH 1 /* ASRC_ASYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_WARP_OVERCLOCKED_STS 0x0800 /* ASRC_ASYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_WARP_OVERCLOCKED_STS_MASK 0x0800 /* ASRC_ASYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_WARP_OVERCLOCKED_STS_SHIFT 11 /* ASRC_ASYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_ASYNC_WARP_OVERCLOCKED_STS_WIDTH 1 /* ASRC_ASYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_SYS_OVERCLOCKED_STS 0x0400 /* ASRC_SYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_SYS_OVERCLOCKED_STS_MASK 0x0400 /* ASRC_SYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_SYS_OVERCLOCKED_STS_SHIFT 10 /* ASRC_SYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_SYS_OVERCLOCKED_STS_WIDTH 1 /* ASRC_SYNC_SYS_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_WARP_OVERCLOCKED_STS 0x0200 /* ASRC_SYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_WARP_OVERCLOCKED_STS_MASK 0x0200 /* ASRC_SYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_WARP_OVERCLOCKED_STS_SHIFT 9 /* ASRC_SYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ASRC_SYNC_WARP_OVERCLOCKED_STS_WIDTH 1 /* ASRC_SYNC_WARP_OVERCLOCKED_STS */ +#define ARIZONA_ADSP2_1_OVERCLOCKED_STS 0x0008 /* ADSP2_1_OVERCLOCKED_STS */ +#define ARIZONA_ADSP2_1_OVERCLOCKED_STS_MASK 0x0008 /* ADSP2_1_OVERCLOCKED_STS */ +#define ARIZONA_ADSP2_1_OVERCLOCKED_STS_SHIFT 3 /* ADSP2_1_OVERCLOCKED_STS */ +#define ARIZONA_ADSP2_1_OVERCLOCKED_STS_WIDTH 1 /* ADSP2_1_OVERCLOCKED_STS */ +#define ARIZONA_ISRC2_OVERCLOCKED_STS 0x0002 /* ISRC2_OVERCLOCKED_STS */ +#define ARIZONA_ISRC2_OVERCLOCKED_STS_MASK 0x0002 /* ISRC2_OVERCLOCKED_STS */ +#define ARIZONA_ISRC2_OVERCLOCKED_STS_SHIFT 1 /* ISRC2_OVERCLOCKED_STS */ +#define ARIZONA_ISRC2_OVERCLOCKED_STS_WIDTH 1 /* ISRC2_OVERCLOCKED_STS */ +#define ARIZONA_ISRC1_OVERCLOCKED_STS 0x0001 /* ISRC1_OVERCLOCKED_STS */ +#define ARIZONA_ISRC1_OVERCLOCKED_STS_MASK 0x0001 /* ISRC1_OVERCLOCKED_STS */ +#define ARIZONA_ISRC1_OVERCLOCKED_STS_SHIFT 0 /* ISRC1_OVERCLOCKED_STS */ +#define ARIZONA_ISRC1_OVERCLOCKED_STS_WIDTH 1 /* ISRC1_OVERCLOCKED_STS */ + +/* + * R3366 (0xD26) - Interrupt Raw Status 8 + */ +#define ARIZONA_AIF3_UNDERCLOCKED_STS 0x0400 /* AIF3_UNDERCLOCKED_STS */ +#define ARIZONA_AIF3_UNDERCLOCKED_STS_MASK 0x0400 /* AIF3_UNDERCLOCKED_STS */ +#define ARIZONA_AIF3_UNDERCLOCKED_STS_SHIFT 10 /* AIF3_UNDERCLOCKED_STS */ +#define ARIZONA_AIF3_UNDERCLOCKED_STS_WIDTH 1 /* AIF3_UNDERCLOCKED_STS */ +#define ARIZONA_AIF2_UNDERCLOCKED_STS 0x0200 /* AIF2_UNDERCLOCKED_STS */ +#define ARIZONA_AIF2_UNDERCLOCKED_STS_MASK 0x0200 /* AIF2_UNDERCLOCKED_STS */ +#define ARIZONA_AIF2_UNDERCLOCKED_STS_SHIFT 9 /* AIF2_UNDERCLOCKED_STS */ +#define ARIZONA_AIF2_UNDERCLOCKED_STS_WIDTH 1 /* AIF2_UNDERCLOCKED_STS */ +#define ARIZONA_AIF1_UNDERCLOCKED_STS 0x0100 /* AIF1_UNDERCLOCKED_STS */ +#define ARIZONA_AIF1_UNDERCLOCKED_STS_MASK 0x0100 /* AIF1_UNDERCLOCKED_STS */ +#define ARIZONA_AIF1_UNDERCLOCKED_STS_SHIFT 8 /* AIF1_UNDERCLOCKED_STS */ +#define ARIZONA_AIF1_UNDERCLOCKED_STS_WIDTH 1 /* AIF1_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC2_UNDERCLOCKED_STS 0x0040 /* ISRC2_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC2_UNDERCLOCKED_STS_MASK 0x0040 /* ISRC2_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC2_UNDERCLOCKED_STS_SHIFT 6 /* ISRC2_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC2_UNDERCLOCKED_STS_WIDTH 1 /* ISRC2_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC1_UNDERCLOCKED_STS 0x0020 /* ISRC1_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC1_UNDERCLOCKED_STS_MASK 0x0020 /* ISRC1_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC1_UNDERCLOCKED_STS_SHIFT 5 /* ISRC1_UNDERCLOCKED_STS */ +#define ARIZONA_ISRC1_UNDERCLOCKED_STS_WIDTH 1 /* ISRC1_UNDERCLOCKED_STS */ +#define ARIZONA_FX_UNDERCLOCKED_STS 0x0010 /* FX_UNDERCLOCKED_STS */ +#define ARIZONA_FX_UNDERCLOCKED_STS_MASK 0x0010 /* FX_UNDERCLOCKED_STS */ +#define ARIZONA_FX_UNDERCLOCKED_STS_SHIFT 4 /* FX_UNDERCLOCKED_STS */ +#define ARIZONA_FX_UNDERCLOCKED_STS_WIDTH 1 /* FX_UNDERCLOCKED_STS */ +#define ARIZONA_ASRC_UNDERCLOCKED_STS 0x0008 /* ASRC_UNDERCLOCKED_STS */ +#define ARIZONA_ASRC_UNDERCLOCKED_STS_MASK 0x0008 /* ASRC_UNDERCLOCKED_STS */ +#define ARIZONA_ASRC_UNDERCLOCKED_STS_SHIFT 3 /* ASRC_UNDERCLOCKED_STS */ +#define ARIZONA_ASRC_UNDERCLOCKED_STS_WIDTH 1 /* ASRC_UNDERCLOCKED_STS */ +#define ARIZONA_DAC_UNDERCLOCKED_STS 0x0004 /* DAC_UNDERCLOCKED_STS */ +#define ARIZONA_DAC_UNDERCLOCKED_STS_MASK 0x0004 /* DAC_UNDERCLOCKED_STS */ +#define ARIZONA_DAC_UNDERCLOCKED_STS_SHIFT 2 /* DAC_UNDERCLOCKED_STS */ +#define ARIZONA_DAC_UNDERCLOCKED_STS_WIDTH 1 /* DAC_UNDERCLOCKED_STS */ +#define ARIZONA_ADC_UNDERCLOCKED_STS 0x0002 /* ADC_UNDERCLOCKED_STS */ +#define ARIZONA_ADC_UNDERCLOCKED_STS_MASK 0x0002 /* ADC_UNDERCLOCKED_STS */ +#define ARIZONA_ADC_UNDERCLOCKED_STS_SHIFT 1 /* ADC_UNDERCLOCKED_STS */ +#define ARIZONA_ADC_UNDERCLOCKED_STS_WIDTH 1 /* ADC_UNDERCLOCKED_STS */ +#define ARIZONA_MIXER_UNDERCLOCKED_STS 0x0001 /* MIXER_UNDERCLOCKED_STS */ +#define ARIZONA_MIXER_UNDERCLOCKED_STS_MASK 0x0001 /* MIXER_UNDERCLOCKED_STS */ +#define ARIZONA_MIXER_UNDERCLOCKED_STS_SHIFT 0 /* MIXER_UNDERCLOCKED_STS */ +#define ARIZONA_MIXER_UNDERCLOCKED_STS_WIDTH 1 /* MIXER_UNDERCLOCKED_STS */ + +/* + * R3392 (0xD40) - IRQ Pin Status + */ +#define ARIZONA_IRQ2_STS 0x0002 /* IRQ2_STS */ +#define ARIZONA_IRQ2_STS_MASK 0x0002 /* IRQ2_STS */ +#define ARIZONA_IRQ2_STS_SHIFT 1 /* IRQ2_STS */ +#define ARIZONA_IRQ2_STS_WIDTH 1 /* IRQ2_STS */ +#define ARIZONA_IRQ1_STS 0x0001 /* IRQ1_STS */ +#define ARIZONA_IRQ1_STS_MASK 0x0001 /* IRQ1_STS */ +#define ARIZONA_IRQ1_STS_SHIFT 0 /* IRQ1_STS */ +#define ARIZONA_IRQ1_STS_WIDTH 1 /* IRQ1_STS */ + +/* + * R3393 (0xD41) - ADSP2 IRQ0 + */ +#define ARIZONA_DSP_IRQ2 0x0002 /* DSP_IRQ2 */ +#define ARIZONA_DSP_IRQ2_MASK 0x0002 /* DSP_IRQ2 */ +#define ARIZONA_DSP_IRQ2_SHIFT 1 /* DSP_IRQ2 */ +#define ARIZONA_DSP_IRQ2_WIDTH 1 /* DSP_IRQ2 */ +#define ARIZONA_DSP_IRQ1 0x0001 /* DSP_IRQ1 */ +#define ARIZONA_DSP_IRQ1_MASK 0x0001 /* DSP_IRQ1 */ +#define ARIZONA_DSP_IRQ1_SHIFT 0 /* DSP_IRQ1 */ +#define ARIZONA_DSP_IRQ1_WIDTH 1 /* DSP_IRQ1 */ + +/* + * R3408 (0xD50) - AOD wkup and trig + */ +#define ARIZONA_GP5_FALL_TRIG_STS 0x0020 /* GP5_FALL_TRIG_STS */ +#define ARIZONA_GP5_FALL_TRIG_STS_MASK 0x0020 /* GP5_FALL_TRIG_STS */ +#define ARIZONA_GP5_FALL_TRIG_STS_SHIFT 5 /* GP5_FALL_TRIG_STS */ +#define ARIZONA_GP5_FALL_TRIG_STS_WIDTH 1 /* GP5_FALL_TRIG_STS */ +#define ARIZONA_GP5_RISE_TRIG_STS 0x0010 /* GP5_RISE_TRIG_STS */ +#define ARIZONA_GP5_RISE_TRIG_STS_MASK 0x0010 /* GP5_RISE_TRIG_STS */ +#define ARIZONA_GP5_RISE_TRIG_STS_SHIFT 4 /* GP5_RISE_TRIG_STS */ +#define ARIZONA_GP5_RISE_TRIG_STS_WIDTH 1 /* GP5_RISE_TRIG_STS */ +#define ARIZONA_JD1_FALL_TRIG_STS 0x0008 /* JD1_FALL_TRIG_STS */ +#define ARIZONA_JD1_FALL_TRIG_STS_MASK 0x0008 /* JD1_FALL_TRIG_STS */ +#define ARIZONA_JD1_FALL_TRIG_STS_SHIFT 3 /* JD1_FALL_TRIG_STS */ +#define ARIZONA_JD1_FALL_TRIG_STS_WIDTH 1 /* JD1_FALL_TRIG_STS */ +#define ARIZONA_JD1_RISE_TRIG_STS 0x0004 /* JD1_RISE_TRIG_STS */ +#define ARIZONA_JD1_RISE_TRIG_STS_MASK 0x0004 /* JD1_RISE_TRIG_STS */ +#define ARIZONA_JD1_RISE_TRIG_STS_SHIFT 2 /* JD1_RISE_TRIG_STS */ +#define ARIZONA_JD1_RISE_TRIG_STS_WIDTH 1 /* JD1_RISE_TRIG_STS */ +#define ARIZONA_JD2_FALL_TRIG_STS 0x0002 /* JD2_FALL_TRIG_STS */ +#define ARIZONA_JD2_FALL_TRIG_STS_MASK 0x0002 /* JD2_FALL_TRIG_STS */ +#define ARIZONA_JD2_FALL_TRIG_STS_SHIFT 1 /* JD2_FALL_TRIG_STS */ +#define ARIZONA_JD2_FALL_TRIG_STS_WIDTH 1 /* JD2_FALL_TRIG_STS */ +#define ARIZONA_JD2_RISE_TRIG_STS 0x0001 /* JD2_RISE_TRIG_STS */ +#define ARIZONA_JD2_RISE_TRIG_STS_MASK 0x0001 /* JD2_RISE_TRIG_STS */ +#define ARIZONA_JD2_RISE_TRIG_STS_SHIFT 0 /* JD2_RISE_TRIG_STS */ +#define ARIZONA_JD2_RISE_TRIG_STS_WIDTH 1 /* JD2_RISE_TRIG_STS */ + +/* + * R3409 (0xD51) - AOD IRQ1 + */ +#define ARIZONA_GP5_FALL_EINT1 0x0020 /* GP5_FALL_EINT1 */ +#define ARIZONA_GP5_FALL_EINT1_MASK 0x0020 /* GP5_FALL_EINT1 */ +#define ARIZONA_GP5_FALL_EINT1_SHIFT 5 /* GP5_FALL_EINT1 */ +#define ARIZONA_GP5_FALL_EINT1_WIDTH 1 /* GP5_FALL_EINT1 */ +#define ARIZONA_GP5_RISE_EINT1 0x0010 /* GP5_RISE_EINT1 */ +#define ARIZONA_GP5_RISE_EINT1_MASK 0x0010 /* GP5_RISE_EINT1 */ +#define ARIZONA_GP5_RISE_EINT1_SHIFT 4 /* GP5_RISE_EINT1 */ +#define ARIZONA_GP5_RISE_EINT1_WIDTH 1 /* GP5_RISE_EINT1 */ +#define ARIZONA_JD1_FALL_EINT1 0x0008 /* JD1_FALL_EINT1 */ +#define ARIZONA_JD1_FALL_EINT1_MASK 0x0008 /* JD1_FALL_EINT1 */ +#define ARIZONA_JD1_FALL_EINT1_SHIFT 3 /* JD1_FALL_EINT1 */ +#define ARIZONA_JD1_FALL_EINT1_WIDTH 1 /* JD1_FALL_EINT1 */ +#define ARIZONA_JD1_RISE_EINT1 0x0004 /* JD1_RISE_EINT1 */ +#define ARIZONA_JD1_RISE_EINT1_MASK 0x0004 /* JD1_RISE_EINT1 */ +#define ARIZONA_JD1_RISE_EINT1_SHIFT 2 /* JD1_RISE_EINT1 */ +#define ARIZONA_JD1_RISE_EINT1_WIDTH 1 /* JD1_RISE_EINT1 */ +#define ARIZONA_JD2_FALL_EINT1 0x0002 /* JD2_FALL_EINT1 */ +#define ARIZONA_JD2_FALL_EINT1_MASK 0x0002 /* JD2_FALL_EINT1 */ +#define ARIZONA_JD2_FALL_EINT1_SHIFT 1 /* JD2_FALL_EINT1 */ +#define ARIZONA_JD2_FALL_EINT1_WIDTH 1 /* JD2_FALL_EINT1 */ +#define ARIZONA_JD2_RISE_EINT1 0x0001 /* JD2_RISE_EINT1 */ +#define ARIZONA_JD2_RISE_EINT1_MASK 0x0001 /* JD2_RISE_EINT1 */ +#define ARIZONA_JD2_RISE_EINT1_SHIFT 0 /* JD2_RISE_EINT1 */ +#define ARIZONA_JD2_RISE_EINT1_WIDTH 1 /* JD2_RISE_EINT1 */ + +/* + * R3410 (0xD52) - AOD IRQ2 + */ +#define ARIZONA_GP5_FALL_EINT2 0x0020 /* GP5_FALL_EINT2 */ +#define ARIZONA_GP5_FALL_EINT2_MASK 0x0020 /* GP5_FALL_EINT2 */ +#define ARIZONA_GP5_FALL_EINT2_SHIFT 5 /* GP5_FALL_EINT2 */ +#define ARIZONA_GP5_FALL_EINT2_WIDTH 1 /* GP5_FALL_EINT2 */ +#define ARIZONA_GP5_RISE_EINT2 0x0010 /* GP5_RISE_EINT2 */ +#define ARIZONA_GP5_RISE_EINT2_MASK 0x0010 /* GP5_RISE_EINT2 */ +#define ARIZONA_GP5_RISE_EINT2_SHIFT 4 /* GP5_RISE_EINT2 */ +#define ARIZONA_GP5_RISE_EINT2_WIDTH 1 /* GP5_RISE_EINT2 */ +#define ARIZONA_JD1_FALL_EINT2 0x0008 /* JD1_FALL_EINT2 */ +#define ARIZONA_JD1_FALL_EINT2_MASK 0x0008 /* JD1_FALL_EINT2 */ +#define ARIZONA_JD1_FALL_EINT2_SHIFT 3 /* JD1_FALL_EINT2 */ +#define ARIZONA_JD1_FALL_EINT2_WIDTH 1 /* JD1_FALL_EINT2 */ +#define ARIZONA_JD1_RISE_EINT2 0x0004 /* JD1_RISE_EINT2 */ +#define ARIZONA_JD1_RISE_EINT2_MASK 0x0004 /* JD1_RISE_EINT2 */ +#define ARIZONA_JD1_RISE_EINT2_SHIFT 2 /* JD1_RISE_EINT2 */ +#define ARIZONA_JD1_RISE_EINT2_WIDTH 1 /* JD1_RISE_EINT2 */ +#define ARIZONA_JD2_FALL_EINT2 0x0002 /* JD2_FALL_EINT2 */ +#define ARIZONA_JD2_FALL_EINT2_MASK 0x0002 /* JD2_FALL_EINT2 */ +#define ARIZONA_JD2_FALL_EINT2_SHIFT 1 /* JD2_FALL_EINT2 */ +#define ARIZONA_JD2_FALL_EINT2_WIDTH 1 /* JD2_FALL_EINT2 */ +#define ARIZONA_JD2_RISE_EINT2 0x0001 /* JD2_RISE_EINT2 */ +#define ARIZONA_JD2_RISE_EINT2_MASK 0x0001 /* JD2_RISE_EINT2 */ +#define ARIZONA_JD2_RISE_EINT2_SHIFT 0 /* JD2_RISE_EINT2 */ +#define ARIZONA_JD2_RISE_EINT2_WIDTH 1 /* JD2_RISE_EINT2 */ + +/* + * R3411 (0xD53) - AOD IRQ Mask IRQ1 + */ +#define ARIZONA_IM_GP5_FALL_EINT1 0x0020 /* IM_GP5_FALL_EINT1 */ +#define ARIZONA_IM_GP5_FALL_EINT1_MASK 0x0020 /* IM_GP5_FALL_EINT1 */ +#define ARIZONA_IM_GP5_FALL_EINT1_SHIFT 5 /* IM_GP5_FALL_EINT1 */ +#define ARIZONA_IM_GP5_FALL_EINT1_WIDTH 1 /* IM_GP5_FALL_EINT1 */ +#define ARIZONA_IM_GP5_RISE_EINT1 0x0010 /* IM_GP5_RISE_EINT1 */ +#define ARIZONA_IM_GP5_RISE_EINT1_MASK 0x0010 /* IM_GP5_RISE_EINT1 */ +#define ARIZONA_IM_GP5_RISE_EINT1_SHIFT 4 /* IM_GP5_RISE_EINT1 */ +#define ARIZONA_IM_GP5_RISE_EINT1_WIDTH 1 /* IM_GP5_RISE_EINT1 */ +#define ARIZONA_IM_JD1_FALL_EINT1 0x0008 /* IM_JD1_FALL_EINT1 */ +#define ARIZONA_IM_JD1_FALL_EINT1_MASK 0x0008 /* IM_JD1_FALL_EINT1 */ +#define ARIZONA_IM_JD1_FALL_EINT1_SHIFT 3 /* IM_JD1_FALL_EINT1 */ +#define ARIZONA_IM_JD1_FALL_EINT1_WIDTH 1 /* IM_JD1_FALL_EINT1 */ +#define ARIZONA_IM_JD1_RISE_EINT1 0x0004 /* IM_JD1_RISE_EINT1 */ +#define ARIZONA_IM_JD1_RISE_EINT1_MASK 0x0004 /* IM_JD1_RISE_EINT1 */ +#define ARIZONA_IM_JD1_RISE_EINT1_SHIFT 2 /* IM_JD1_RISE_EINT1 */ +#define ARIZONA_IM_JD1_RISE_EINT1_WIDTH 1 /* IM_JD1_RISE_EINT1 */ +#define ARIZONA_IM_JD2_FALL_EINT1 0x0002 /* IM_JD2_FALL_EINT1 */ +#define ARIZONA_IM_JD2_FALL_EINT1_MASK 0x0002 /* IM_JD2_FALL_EINT1 */ +#define ARIZONA_IM_JD2_FALL_EINT1_SHIFT 1 /* IM_JD2_FALL_EINT1 */ +#define ARIZONA_IM_JD2_FALL_EINT1_WIDTH 1 /* IM_JD2_FALL_EINT1 */ +#define ARIZONA_IM_JD2_RISE_EINT1 0x0001 /* IM_JD2_RISE_EINT1 */ +#define ARIZONA_IM_JD2_RISE_EINT1_MASK 0x0001 /* IM_JD2_RISE_EINT1 */ +#define ARIZONA_IM_JD2_RISE_EINT1_SHIFT 0 /* IM_JD2_RISE_EINT1 */ +#define ARIZONA_IM_JD2_RISE_EINT1_WIDTH 1 /* IM_JD2_RISE_EINT1 */ + +/* + * R3412 (0xD54) - AOD IRQ Mask IRQ2 + */ +#define ARIZONA_IM_GP5_FALL_EINT2 0x0020 /* IM_GP5_FALL_EINT2 */ +#define ARIZONA_IM_GP5_FALL_EINT2_MASK 0x0020 /* IM_GP5_FALL_EINT2 */ +#define ARIZONA_IM_GP5_FALL_EINT2_SHIFT 5 /* IM_GP5_FALL_EINT2 */ +#define ARIZONA_IM_GP5_FALL_EINT2_WIDTH 1 /* IM_GP5_FALL_EINT2 */ +#define ARIZONA_IM_GP5_RISE_EINT2 0x0010 /* IM_GP5_RISE_EINT2 */ +#define ARIZONA_IM_GP5_RISE_EINT2_MASK 0x0010 /* IM_GP5_RISE_EINT2 */ +#define ARIZONA_IM_GP5_RISE_EINT2_SHIFT 4 /* IM_GP5_RISE_EINT2 */ +#define ARIZONA_IM_GP5_RISE_EINT2_WIDTH 1 /* IM_GP5_RISE_EINT2 */ +#define ARIZONA_IM_JD1_FALL_EINT2 0x0008 /* IM_JD1_FALL_EINT2 */ +#define ARIZONA_IM_JD1_FALL_EINT2_MASK 0x0008 /* IM_JD1_FALL_EINT2 */ +#define ARIZONA_IM_JD1_FALL_EINT2_SHIFT 3 /* IM_JD1_FALL_EINT2 */ +#define ARIZONA_IM_JD1_FALL_EINT2_WIDTH 1 /* IM_JD1_FALL_EINT2 */ +#define ARIZONA_IM_JD1_RISE_EINT2 0x0004 /* IM_JD1_RISE_EINT2 */ +#define ARIZONA_IM_JD1_RISE_EINT2_MASK 0x0004 /* IM_JD1_RISE_EINT2 */ +#define ARIZONA_IM_JD1_RISE_EINT2_SHIFT 2 /* IM_JD1_RISE_EINT2 */ +#define ARIZONA_IM_JD1_RISE_EINT2_WIDTH 1 /* IM_JD1_RISE_EINT2 */ +#define ARIZONA_IM_JD2_FALL_EINT2 0x0002 /* IM_JD2_FALL_EINT2 */ +#define ARIZONA_IM_JD2_FALL_EINT2_MASK 0x0002 /* IM_JD2_FALL_EINT2 */ +#define ARIZONA_IM_JD2_FALL_EINT2_SHIFT 1 /* IM_JD2_FALL_EINT2 */ +#define ARIZONA_IM_JD2_FALL_EINT2_WIDTH 1 /* IM_JD2_FALL_EINT2 */ +#define ARIZONA_IM_JD2_RISE_EINT2 0x0001 /* IM_JD2_RISE_EINT2 */ +#define ARIZONA_IM_JD2_RISE_EINT2_MASK 0x0001 /* IM_JD2_RISE_EINT2 */ +#define ARIZONA_IM_JD2_RISE_EINT2_SHIFT 0 /* IM_JD2_RISE_EINT2 */ +#define ARIZONA_IM_JD2_RISE_EINT2_WIDTH 1 /* IM_JD2_RISE_EINT2 */ + +/* + * R3413 (0xD55) - AOD IRQ Raw Status + */ +#define ARIZONA_GP5_STS 0x0004 /* GP5_STS */ +#define ARIZONA_GP5_STS_MASK 0x0004 /* GP5_STS */ +#define ARIZONA_GP5_STS_SHIFT 2 /* GP5_STS */ +#define ARIZONA_GP5_STS_WIDTH 1 /* GP5_STS */ +#define ARIZONA_JD2_STS 0x0002 /* JD2_STS */ +#define ARIZONA_JD2_STS_MASK 0x0002 /* JD2_STS */ +#define ARIZONA_JD2_STS_SHIFT 1 /* JD2_STS */ +#define ARIZONA_JD2_STS_WIDTH 1 /* JD2_STS */ +#define ARIZONA_JD1_STS 0x0001 /* JD1_STS */ +#define ARIZONA_JD1_STS_MASK 0x0001 /* JD1_STS */ +#define ARIZONA_JD1_STS_SHIFT 0 /* JD1_STS */ +#define ARIZONA_JD1_STS_WIDTH 1 /* JD1_STS */ + +/* + * R3414 (0xD56) - Jack detect debounce + */ +#define ARIZONA_JD2_DB 0x0002 /* JD2_DB */ +#define ARIZONA_JD2_DB_MASK 0x0002 /* JD2_DB */ +#define ARIZONA_JD2_DB_SHIFT 1 /* JD2_DB */ +#define ARIZONA_JD2_DB_WIDTH 1 /* JD2_DB */ +#define ARIZONA_JD1_DB 0x0001 /* JD1_DB */ +#define ARIZONA_JD1_DB_MASK 0x0001 /* JD1_DB */ +#define ARIZONA_JD1_DB_SHIFT 0 /* JD1_DB */ +#define ARIZONA_JD1_DB_WIDTH 1 /* JD1_DB */ + +/* + * R3584 (0xE00) - FX_Ctrl1 + */ +#define ARIZONA_FX_RATE_MASK 0x7800 /* FX_RATE - [14:11] */ +#define ARIZONA_FX_RATE_SHIFT 11 /* FX_RATE - [14:11] */ +#define ARIZONA_FX_RATE_WIDTH 4 /* FX_RATE - [14:11] */ + +/* + * R3585 (0xE01) - FX_Ctrl2 + */ +#define ARIZONA_FX_STS_MASK 0xFFF0 /* FX_STS - [15:4] */ +#define ARIZONA_FX_STS_SHIFT 4 /* FX_STS - [15:4] */ +#define ARIZONA_FX_STS_WIDTH 12 /* FX_STS - [15:4] */ + +/* + * R3600 (0xE10) - EQ1_1 + */ +#define ARIZONA_EQ1_B1_GAIN_MASK 0xF800 /* EQ1_B1_GAIN - [15:11] */ +#define ARIZONA_EQ1_B1_GAIN_SHIFT 11 /* EQ1_B1_GAIN - [15:11] */ +#define ARIZONA_EQ1_B1_GAIN_WIDTH 5 /* EQ1_B1_GAIN - [15:11] */ +#define ARIZONA_EQ1_B2_GAIN_MASK 0x07C0 /* EQ1_B2_GAIN - [10:6] */ +#define ARIZONA_EQ1_B2_GAIN_SHIFT 6 /* EQ1_B2_GAIN - [10:6] */ +#define ARIZONA_EQ1_B2_GAIN_WIDTH 5 /* EQ1_B2_GAIN - [10:6] */ +#define ARIZONA_EQ1_B3_GAIN_MASK 0x003E /* EQ1_B3_GAIN - [5:1] */ +#define ARIZONA_EQ1_B3_GAIN_SHIFT 1 /* EQ1_B3_GAIN - [5:1] */ +#define ARIZONA_EQ1_B3_GAIN_WIDTH 5 /* EQ1_B3_GAIN - [5:1] */ +#define ARIZONA_EQ1_ENA 0x0001 /* EQ1_ENA */ +#define ARIZONA_EQ1_ENA_MASK 0x0001 /* EQ1_ENA */ +#define ARIZONA_EQ1_ENA_SHIFT 0 /* EQ1_ENA */ +#define ARIZONA_EQ1_ENA_WIDTH 1 /* EQ1_ENA */ + +/* + * R3601 (0xE11) - EQ1_2 + */ +#define ARIZONA_EQ1_B4_GAIN_MASK 0xF800 /* EQ1_B4_GAIN - [15:11] */ +#define ARIZONA_EQ1_B4_GAIN_SHIFT 11 /* EQ1_B4_GAIN - [15:11] */ +#define ARIZONA_EQ1_B4_GAIN_WIDTH 5 /* EQ1_B4_GAIN - [15:11] */ +#define ARIZONA_EQ1_B5_GAIN_MASK 0x07C0 /* EQ1_B5_GAIN - [10:6] */ +#define ARIZONA_EQ1_B5_GAIN_SHIFT 6 /* EQ1_B5_GAIN - [10:6] */ +#define ARIZONA_EQ1_B5_GAIN_WIDTH 5 /* EQ1_B5_GAIN - [10:6] */ +#define ARIZONA_EQ1_B1_MODE 0x0001 /* EQ1_B1_MODE */ +#define ARIZONA_EQ1_B1_MODE_MASK 0x0001 /* EQ1_B1_MODE */ +#define ARIZONA_EQ1_B1_MODE_SHIFT 0 /* EQ1_B1_MODE */ +#define ARIZONA_EQ1_B1_MODE_WIDTH 1 /* EQ1_B1_MODE */ + +/* + * R3602 (0xE12) - EQ1_3 + */ +#define ARIZONA_EQ1_B1_A_MASK 0xFFFF /* EQ1_B1_A - [15:0] */ +#define ARIZONA_EQ1_B1_A_SHIFT 0 /* EQ1_B1_A - [15:0] */ +#define ARIZONA_EQ1_B1_A_WIDTH 16 /* EQ1_B1_A - [15:0] */ + +/* + * R3603 (0xE13) - EQ1_4 + */ +#define ARIZONA_EQ1_B1_B_MASK 0xFFFF /* EQ1_B1_B - [15:0] */ +#define ARIZONA_EQ1_B1_B_SHIFT 0 /* EQ1_B1_B - [15:0] */ +#define ARIZONA_EQ1_B1_B_WIDTH 16 /* EQ1_B1_B - [15:0] */ + +/* + * R3604 (0xE14) - EQ1_5 + */ +#define ARIZONA_EQ1_B1_PG_MASK 0xFFFF /* EQ1_B1_PG - [15:0] */ +#define ARIZONA_EQ1_B1_PG_SHIFT 0 /* EQ1_B1_PG - [15:0] */ +#define ARIZONA_EQ1_B1_PG_WIDTH 16 /* EQ1_B1_PG - [15:0] */ + +/* + * R3605 (0xE15) - EQ1_6 + */ +#define ARIZONA_EQ1_B2_A_MASK 0xFFFF /* EQ1_B2_A - [15:0] */ +#define ARIZONA_EQ1_B2_A_SHIFT 0 /* EQ1_B2_A - [15:0] */ +#define ARIZONA_EQ1_B2_A_WIDTH 16 /* EQ1_B2_A - [15:0] */ + +/* + * R3606 (0xE16) - EQ1_7 + */ +#define ARIZONA_EQ1_B2_B_MASK 0xFFFF /* EQ1_B2_B - [15:0] */ +#define ARIZONA_EQ1_B2_B_SHIFT 0 /* EQ1_B2_B - [15:0] */ +#define ARIZONA_EQ1_B2_B_WIDTH 16 /* EQ1_B2_B - [15:0] */ + +/* + * R3607 (0xE17) - EQ1_8 + */ +#define ARIZONA_EQ1_B2_C_MASK 0xFFFF /* EQ1_B2_C - [15:0] */ +#define ARIZONA_EQ1_B2_C_SHIFT 0 /* EQ1_B2_C - [15:0] */ +#define ARIZONA_EQ1_B2_C_WIDTH 16 /* EQ1_B2_C - [15:0] */ + +/* + * R3608 (0xE18) - EQ1_9 + */ +#define ARIZONA_EQ1_B2_PG_MASK 0xFFFF /* EQ1_B2_PG - [15:0] */ +#define ARIZONA_EQ1_B2_PG_SHIFT 0 /* EQ1_B2_PG - [15:0] */ +#define ARIZONA_EQ1_B2_PG_WIDTH 16 /* EQ1_B2_PG - [15:0] */ + +/* + * R3609 (0xE19) - EQ1_10 + */ +#define ARIZONA_EQ1_B3_A_MASK 0xFFFF /* EQ1_B3_A - [15:0] */ +#define ARIZONA_EQ1_B3_A_SHIFT 0 /* EQ1_B3_A - [15:0] */ +#define ARIZONA_EQ1_B3_A_WIDTH 16 /* EQ1_B3_A - [15:0] */ + +/* + * R3610 (0xE1A) - EQ1_11 + */ +#define ARIZONA_EQ1_B3_B_MASK 0xFFFF /* EQ1_B3_B - [15:0] */ +#define ARIZONA_EQ1_B3_B_SHIFT 0 /* EQ1_B3_B - [15:0] */ +#define ARIZONA_EQ1_B3_B_WIDTH 16 /* EQ1_B3_B - [15:0] */ + +/* + * R3611 (0xE1B) - EQ1_12 + */ +#define ARIZONA_EQ1_B3_C_MASK 0xFFFF /* EQ1_B3_C - [15:0] */ +#define ARIZONA_EQ1_B3_C_SHIFT 0 /* EQ1_B3_C - [15:0] */ +#define ARIZONA_EQ1_B3_C_WIDTH 16 /* EQ1_B3_C - [15:0] */ + +/* + * R3612 (0xE1C) - EQ1_13 + */ +#define ARIZONA_EQ1_B3_PG_MASK 0xFFFF /* EQ1_B3_PG - [15:0] */ +#define ARIZONA_EQ1_B3_PG_SHIFT 0 /* EQ1_B3_PG - [15:0] */ +#define ARIZONA_EQ1_B3_PG_WIDTH 16 /* EQ1_B3_PG - [15:0] */ + +/* + * R3613 (0xE1D) - EQ1_14 + */ +#define ARIZONA_EQ1_B4_A_MASK 0xFFFF /* EQ1_B4_A - [15:0] */ +#define ARIZONA_EQ1_B4_A_SHIFT 0 /* EQ1_B4_A - [15:0] */ +#define ARIZONA_EQ1_B4_A_WIDTH 16 /* EQ1_B4_A - [15:0] */ + +/* + * R3614 (0xE1E) - EQ1_15 + */ +#define ARIZONA_EQ1_B4_B_MASK 0xFFFF /* EQ1_B4_B - [15:0] */ +#define ARIZONA_EQ1_B4_B_SHIFT 0 /* EQ1_B4_B - [15:0] */ +#define ARIZONA_EQ1_B4_B_WIDTH 16 /* EQ1_B4_B - [15:0] */ + +/* + * R3615 (0xE1F) - EQ1_16 + */ +#define ARIZONA_EQ1_B4_C_MASK 0xFFFF /* EQ1_B4_C - [15:0] */ +#define ARIZONA_EQ1_B4_C_SHIFT 0 /* EQ1_B4_C - [15:0] */ +#define ARIZONA_EQ1_B4_C_WIDTH 16 /* EQ1_B4_C - [15:0] */ + +/* + * R3616 (0xE20) - EQ1_17 + */ +#define ARIZONA_EQ1_B4_PG_MASK 0xFFFF /* EQ1_B4_PG - [15:0] */ +#define ARIZONA_EQ1_B4_PG_SHIFT 0 /* EQ1_B4_PG - [15:0] */ +#define ARIZONA_EQ1_B4_PG_WIDTH 16 /* EQ1_B4_PG - [15:0] */ + +/* + * R3617 (0xE21) - EQ1_18 + */ +#define ARIZONA_EQ1_B5_A_MASK 0xFFFF /* EQ1_B5_A - [15:0] */ +#define ARIZONA_EQ1_B5_A_SHIFT 0 /* EQ1_B5_A - [15:0] */ +#define ARIZONA_EQ1_B5_A_WIDTH 16 /* EQ1_B5_A - [15:0] */ + +/* + * R3618 (0xE22) - EQ1_19 + */ +#define ARIZONA_EQ1_B5_B_MASK 0xFFFF /* EQ1_B5_B - [15:0] */ +#define ARIZONA_EQ1_B5_B_SHIFT 0 /* EQ1_B5_B - [15:0] */ +#define ARIZONA_EQ1_B5_B_WIDTH 16 /* EQ1_B5_B - [15:0] */ + +/* + * R3619 (0xE23) - EQ1_20 + */ +#define ARIZONA_EQ1_B5_PG_MASK 0xFFFF /* EQ1_B5_PG - [15:0] */ +#define ARIZONA_EQ1_B5_PG_SHIFT 0 /* EQ1_B5_PG - [15:0] */ +#define ARIZONA_EQ1_B5_PG_WIDTH 16 /* EQ1_B5_PG - [15:0] */ + +/* + * R3620 (0xE24) - EQ1_21 + */ +#define ARIZONA_EQ1_B1_C_MASK 0xFFFF /* EQ1_B1_C - [15:0] */ +#define ARIZONA_EQ1_B1_C_SHIFT 0 /* EQ1_B1_C - [15:0] */ +#define ARIZONA_EQ1_B1_C_WIDTH 16 /* EQ1_B1_C - [15:0] */ + +/* + * R3622 (0xE26) - EQ2_1 + */ +#define ARIZONA_EQ2_B1_GAIN_MASK 0xF800 /* EQ2_B1_GAIN - [15:11] */ +#define ARIZONA_EQ2_B1_GAIN_SHIFT 11 /* EQ2_B1_GAIN - [15:11] */ +#define ARIZONA_EQ2_B1_GAIN_WIDTH 5 /* EQ2_B1_GAIN - [15:11] */ +#define ARIZONA_EQ2_B2_GAIN_MASK 0x07C0 /* EQ2_B2_GAIN - [10:6] */ +#define ARIZONA_EQ2_B2_GAIN_SHIFT 6 /* EQ2_B2_GAIN - [10:6] */ +#define ARIZONA_EQ2_B2_GAIN_WIDTH 5 /* EQ2_B2_GAIN - [10:6] */ +#define ARIZONA_EQ2_B3_GAIN_MASK 0x003E /* EQ2_B3_GAIN - [5:1] */ +#define ARIZONA_EQ2_B3_GAIN_SHIFT 1 /* EQ2_B3_GAIN - [5:1] */ +#define ARIZONA_EQ2_B3_GAIN_WIDTH 5 /* EQ2_B3_GAIN - [5:1] */ +#define ARIZONA_EQ2_ENA 0x0001 /* EQ2_ENA */ +#define ARIZONA_EQ2_ENA_MASK 0x0001 /* EQ2_ENA */ +#define ARIZONA_EQ2_ENA_SHIFT 0 /* EQ2_ENA */ +#define ARIZONA_EQ2_ENA_WIDTH 1 /* EQ2_ENA */ + +/* + * R3623 (0xE27) - EQ2_2 + */ +#define ARIZONA_EQ2_B4_GAIN_MASK 0xF800 /* EQ2_B4_GAIN - [15:11] */ +#define ARIZONA_EQ2_B4_GAIN_SHIFT 11 /* EQ2_B4_GAIN - [15:11] */ +#define ARIZONA_EQ2_B4_GAIN_WIDTH 5 /* EQ2_B4_GAIN - [15:11] */ +#define ARIZONA_EQ2_B5_GAIN_MASK 0x07C0 /* EQ2_B5_GAIN - [10:6] */ +#define ARIZONA_EQ2_B5_GAIN_SHIFT 6 /* EQ2_B5_GAIN - [10:6] */ +#define ARIZONA_EQ2_B5_GAIN_WIDTH 5 /* EQ2_B5_GAIN - [10:6] */ +#define ARIZONA_EQ2_B1_MODE 0x0001 /* EQ2_B1_MODE */ +#define ARIZONA_EQ2_B1_MODE_MASK 0x0001 /* EQ2_B1_MODE */ +#define ARIZONA_EQ2_B1_MODE_SHIFT 0 /* EQ2_B1_MODE */ +#define ARIZONA_EQ2_B1_MODE_WIDTH 1 /* EQ2_B1_MODE */ + +/* + * R3624 (0xE28) - EQ2_3 + */ +#define ARIZONA_EQ2_B1_A_MASK 0xFFFF /* EQ2_B1_A - [15:0] */ +#define ARIZONA_EQ2_B1_A_SHIFT 0 /* EQ2_B1_A - [15:0] */ +#define ARIZONA_EQ2_B1_A_WIDTH 16 /* EQ2_B1_A - [15:0] */ + +/* + * R3625 (0xE29) - EQ2_4 + */ +#define ARIZONA_EQ2_B1_B_MASK 0xFFFF /* EQ2_B1_B - [15:0] */ +#define ARIZONA_EQ2_B1_B_SHIFT 0 /* EQ2_B1_B - [15:0] */ +#define ARIZONA_EQ2_B1_B_WIDTH 16 /* EQ2_B1_B - [15:0] */ + +/* + * R3626 (0xE2A) - EQ2_5 + */ +#define ARIZONA_EQ2_B1_PG_MASK 0xFFFF /* EQ2_B1_PG - [15:0] */ +#define ARIZONA_EQ2_B1_PG_SHIFT 0 /* EQ2_B1_PG - [15:0] */ +#define ARIZONA_EQ2_B1_PG_WIDTH 16 /* EQ2_B1_PG - [15:0] */ + +/* + * R3627 (0xE2B) - EQ2_6 + */ +#define ARIZONA_EQ2_B2_A_MASK 0xFFFF /* EQ2_B2_A - [15:0] */ +#define ARIZONA_EQ2_B2_A_SHIFT 0 /* EQ2_B2_A - [15:0] */ +#define ARIZONA_EQ2_B2_A_WIDTH 16 /* EQ2_B2_A - [15:0] */ + +/* + * R3628 (0xE2C) - EQ2_7 + */ +#define ARIZONA_EQ2_B2_B_MASK 0xFFFF /* EQ2_B2_B - [15:0] */ +#define ARIZONA_EQ2_B2_B_SHIFT 0 /* EQ2_B2_B - [15:0] */ +#define ARIZONA_EQ2_B2_B_WIDTH 16 /* EQ2_B2_B - [15:0] */ + +/* + * R3629 (0xE2D) - EQ2_8 + */ +#define ARIZONA_EQ2_B2_C_MASK 0xFFFF /* EQ2_B2_C - [15:0] */ +#define ARIZONA_EQ2_B2_C_SHIFT 0 /* EQ2_B2_C - [15:0] */ +#define ARIZONA_EQ2_B2_C_WIDTH 16 /* EQ2_B2_C - [15:0] */ + +/* + * R3630 (0xE2E) - EQ2_9 + */ +#define ARIZONA_EQ2_B2_PG_MASK 0xFFFF /* EQ2_B2_PG - [15:0] */ +#define ARIZONA_EQ2_B2_PG_SHIFT 0 /* EQ2_B2_PG - [15:0] */ +#define ARIZONA_EQ2_B2_PG_WIDTH 16 /* EQ2_B2_PG - [15:0] */ + +/* + * R3631 (0xE2F) - EQ2_10 + */ +#define ARIZONA_EQ2_B3_A_MASK 0xFFFF /* EQ2_B3_A - [15:0] */ +#define ARIZONA_EQ2_B3_A_SHIFT 0 /* EQ2_B3_A - [15:0] */ +#define ARIZONA_EQ2_B3_A_WIDTH 16 /* EQ2_B3_A - [15:0] */ + +/* + * R3632 (0xE30) - EQ2_11 + */ +#define ARIZONA_EQ2_B3_B_MASK 0xFFFF /* EQ2_B3_B - [15:0] */ +#define ARIZONA_EQ2_B3_B_SHIFT 0 /* EQ2_B3_B - [15:0] */ +#define ARIZONA_EQ2_B3_B_WIDTH 16 /* EQ2_B3_B - [15:0] */ + +/* + * R3633 (0xE31) - EQ2_12 + */ +#define ARIZONA_EQ2_B3_C_MASK 0xFFFF /* EQ2_B3_C - [15:0] */ +#define ARIZONA_EQ2_B3_C_SHIFT 0 /* EQ2_B3_C - [15:0] */ +#define ARIZONA_EQ2_B3_C_WIDTH 16 /* EQ2_B3_C - [15:0] */ + +/* + * R3634 (0xE32) - EQ2_13 + */ +#define ARIZONA_EQ2_B3_PG_MASK 0xFFFF /* EQ2_B3_PG - [15:0] */ +#define ARIZONA_EQ2_B3_PG_SHIFT 0 /* EQ2_B3_PG - [15:0] */ +#define ARIZONA_EQ2_B3_PG_WIDTH 16 /* EQ2_B3_PG - [15:0] */ + +/* + * R3635 (0xE33) - EQ2_14 + */ +#define ARIZONA_EQ2_B4_A_MASK 0xFFFF /* EQ2_B4_A - [15:0] */ +#define ARIZONA_EQ2_B4_A_SHIFT 0 /* EQ2_B4_A - [15:0] */ +#define ARIZONA_EQ2_B4_A_WIDTH 16 /* EQ2_B4_A - [15:0] */ + +/* + * R3636 (0xE34) - EQ2_15 + */ +#define ARIZONA_EQ2_B4_B_MASK 0xFFFF /* EQ2_B4_B - [15:0] */ +#define ARIZONA_EQ2_B4_B_SHIFT 0 /* EQ2_B4_B - [15:0] */ +#define ARIZONA_EQ2_B4_B_WIDTH 16 /* EQ2_B4_B - [15:0] */ + +/* + * R3637 (0xE35) - EQ2_16 + */ +#define ARIZONA_EQ2_B4_C_MASK 0xFFFF /* EQ2_B4_C - [15:0] */ +#define ARIZONA_EQ2_B4_C_SHIFT 0 /* EQ2_B4_C - [15:0] */ +#define ARIZONA_EQ2_B4_C_WIDTH 16 /* EQ2_B4_C - [15:0] */ + +/* + * R3638 (0xE36) - EQ2_17 + */ +#define ARIZONA_EQ2_B4_PG_MASK 0xFFFF /* EQ2_B4_PG - [15:0] */ +#define ARIZONA_EQ2_B4_PG_SHIFT 0 /* EQ2_B4_PG - [15:0] */ +#define ARIZONA_EQ2_B4_PG_WIDTH 16 /* EQ2_B4_PG - [15:0] */ + +/* + * R3639 (0xE37) - EQ2_18 + */ +#define ARIZONA_EQ2_B5_A_MASK 0xFFFF /* EQ2_B5_A - [15:0] */ +#define ARIZONA_EQ2_B5_A_SHIFT 0 /* EQ2_B5_A - [15:0] */ +#define ARIZONA_EQ2_B5_A_WIDTH 16 /* EQ2_B5_A - [15:0] */ + +/* + * R3640 (0xE38) - EQ2_19 + */ +#define ARIZONA_EQ2_B5_B_MASK 0xFFFF /* EQ2_B5_B - [15:0] */ +#define ARIZONA_EQ2_B5_B_SHIFT 0 /* EQ2_B5_B - [15:0] */ +#define ARIZONA_EQ2_B5_B_WIDTH 16 /* EQ2_B5_B - [15:0] */ + +/* + * R3641 (0xE39) - EQ2_20 + */ +#define ARIZONA_EQ2_B5_PG_MASK 0xFFFF /* EQ2_B5_PG - [15:0] */ +#define ARIZONA_EQ2_B5_PG_SHIFT 0 /* EQ2_B5_PG - [15:0] */ +#define ARIZONA_EQ2_B5_PG_WIDTH 16 /* EQ2_B5_PG - [15:0] */ + +/* + * R3642 (0xE3A) - EQ2_21 + */ +#define ARIZONA_EQ2_B1_C_MASK 0xFFFF /* EQ2_B1_C - [15:0] */ +#define ARIZONA_EQ2_B1_C_SHIFT 0 /* EQ2_B1_C - [15:0] */ +#define ARIZONA_EQ2_B1_C_WIDTH 16 /* EQ2_B1_C - [15:0] */ + +/* + * R3644 (0xE3C) - EQ3_1 + */ +#define ARIZONA_EQ3_B1_GAIN_MASK 0xF800 /* EQ3_B1_GAIN - [15:11] */ +#define ARIZONA_EQ3_B1_GAIN_SHIFT 11 /* EQ3_B1_GAIN - [15:11] */ +#define ARIZONA_EQ3_B1_GAIN_WIDTH 5 /* EQ3_B1_GAIN - [15:11] */ +#define ARIZONA_EQ3_B2_GAIN_MASK 0x07C0 /* EQ3_B2_GAIN - [10:6] */ +#define ARIZONA_EQ3_B2_GAIN_SHIFT 6 /* EQ3_B2_GAIN - [10:6] */ +#define ARIZONA_EQ3_B2_GAIN_WIDTH 5 /* EQ3_B2_GAIN - [10:6] */ +#define ARIZONA_EQ3_B3_GAIN_MASK 0x003E /* EQ3_B3_GAIN - [5:1] */ +#define ARIZONA_EQ3_B3_GAIN_SHIFT 1 /* EQ3_B3_GAIN - [5:1] */ +#define ARIZONA_EQ3_B3_GAIN_WIDTH 5 /* EQ3_B3_GAIN - [5:1] */ +#define ARIZONA_EQ3_ENA 0x0001 /* EQ3_ENA */ +#define ARIZONA_EQ3_ENA_MASK 0x0001 /* EQ3_ENA */ +#define ARIZONA_EQ3_ENA_SHIFT 0 /* EQ3_ENA */ +#define ARIZONA_EQ3_ENA_WIDTH 1 /* EQ3_ENA */ + +/* + * R3645 (0xE3D) - EQ3_2 + */ +#define ARIZONA_EQ3_B4_GAIN_MASK 0xF800 /* EQ3_B4_GAIN - [15:11] */ +#define ARIZONA_EQ3_B4_GAIN_SHIFT 11 /* EQ3_B4_GAIN - [15:11] */ +#define ARIZONA_EQ3_B4_GAIN_WIDTH 5 /* EQ3_B4_GAIN - [15:11] */ +#define ARIZONA_EQ3_B5_GAIN_MASK 0x07C0 /* EQ3_B5_GAIN - [10:6] */ +#define ARIZONA_EQ3_B5_GAIN_SHIFT 6 /* EQ3_B5_GAIN - [10:6] */ +#define ARIZONA_EQ3_B5_GAIN_WIDTH 5 /* EQ3_B5_GAIN - [10:6] */ +#define ARIZONA_EQ3_B1_MODE 0x0001 /* EQ3_B1_MODE */ +#define ARIZONA_EQ3_B1_MODE_MASK 0x0001 /* EQ3_B1_MODE */ +#define ARIZONA_EQ3_B1_MODE_SHIFT 0 /* EQ3_B1_MODE */ +#define ARIZONA_EQ3_B1_MODE_WIDTH 1 /* EQ3_B1_MODE */ + +/* + * R3646 (0xE3E) - EQ3_3 + */ +#define ARIZONA_EQ3_B1_A_MASK 0xFFFF /* EQ3_B1_A - [15:0] */ +#define ARIZONA_EQ3_B1_A_SHIFT 0 /* EQ3_B1_A - [15:0] */ +#define ARIZONA_EQ3_B1_A_WIDTH 16 /* EQ3_B1_A - [15:0] */ + +/* + * R3647 (0xE3F) - EQ3_4 + */ +#define ARIZONA_EQ3_B1_B_MASK 0xFFFF /* EQ3_B1_B - [15:0] */ +#define ARIZONA_EQ3_B1_B_SHIFT 0 /* EQ3_B1_B - [15:0] */ +#define ARIZONA_EQ3_B1_B_WIDTH 16 /* EQ3_B1_B - [15:0] */ + +/* + * R3648 (0xE40) - EQ3_5 + */ +#define ARIZONA_EQ3_B1_PG_MASK 0xFFFF /* EQ3_B1_PG - [15:0] */ +#define ARIZONA_EQ3_B1_PG_SHIFT 0 /* EQ3_B1_PG - [15:0] */ +#define ARIZONA_EQ3_B1_PG_WIDTH 16 /* EQ3_B1_PG - [15:0] */ + +/* + * R3649 (0xE41) - EQ3_6 + */ +#define ARIZONA_EQ3_B2_A_MASK 0xFFFF /* EQ3_B2_A - [15:0] */ +#define ARIZONA_EQ3_B2_A_SHIFT 0 /* EQ3_B2_A - [15:0] */ +#define ARIZONA_EQ3_B2_A_WIDTH 16 /* EQ3_B2_A - [15:0] */ + +/* + * R3650 (0xE42) - EQ3_7 + */ +#define ARIZONA_EQ3_B2_B_MASK 0xFFFF /* EQ3_B2_B - [15:0] */ +#define ARIZONA_EQ3_B2_B_SHIFT 0 /* EQ3_B2_B - [15:0] */ +#define ARIZONA_EQ3_B2_B_WIDTH 16 /* EQ3_B2_B - [15:0] */ + +/* + * R3651 (0xE43) - EQ3_8 + */ +#define ARIZONA_EQ3_B2_C_MASK 0xFFFF /* EQ3_B2_C - [15:0] */ +#define ARIZONA_EQ3_B2_C_SHIFT 0 /* EQ3_B2_C - [15:0] */ +#define ARIZONA_EQ3_B2_C_WIDTH 16 /* EQ3_B2_C - [15:0] */ + +/* + * R3652 (0xE44) - EQ3_9 + */ +#define ARIZONA_EQ3_B2_PG_MASK 0xFFFF /* EQ3_B2_PG - [15:0] */ +#define ARIZONA_EQ3_B2_PG_SHIFT 0 /* EQ3_B2_PG - [15:0] */ +#define ARIZONA_EQ3_B2_PG_WIDTH 16 /* EQ3_B2_PG - [15:0] */ + +/* + * R3653 (0xE45) - EQ3_10 + */ +#define ARIZONA_EQ3_B3_A_MASK 0xFFFF /* EQ3_B3_A - [15:0] */ +#define ARIZONA_EQ3_B3_A_SHIFT 0 /* EQ3_B3_A - [15:0] */ +#define ARIZONA_EQ3_B3_A_WIDTH 16 /* EQ3_B3_A - [15:0] */ + +/* + * R3654 (0xE46) - EQ3_11 + */ +#define ARIZONA_EQ3_B3_B_MASK 0xFFFF /* EQ3_B3_B - [15:0] */ +#define ARIZONA_EQ3_B3_B_SHIFT 0 /* EQ3_B3_B - [15:0] */ +#define ARIZONA_EQ3_B3_B_WIDTH 16 /* EQ3_B3_B - [15:0] */ + +/* + * R3655 (0xE47) - EQ3_12 + */ +#define ARIZONA_EQ3_B3_C_MASK 0xFFFF /* EQ3_B3_C - [15:0] */ +#define ARIZONA_EQ3_B3_C_SHIFT 0 /* EQ3_B3_C - [15:0] */ +#define ARIZONA_EQ3_B3_C_WIDTH 16 /* EQ3_B3_C - [15:0] */ + +/* + * R3656 (0xE48) - EQ3_13 + */ +#define ARIZONA_EQ3_B3_PG_MASK 0xFFFF /* EQ3_B3_PG - [15:0] */ +#define ARIZONA_EQ3_B3_PG_SHIFT 0 /* EQ3_B3_PG - [15:0] */ +#define ARIZONA_EQ3_B3_PG_WIDTH 16 /* EQ3_B3_PG - [15:0] */ + +/* + * R3657 (0xE49) - EQ3_14 + */ +#define ARIZONA_EQ3_B4_A_MASK 0xFFFF /* EQ3_B4_A - [15:0] */ +#define ARIZONA_EQ3_B4_A_SHIFT 0 /* EQ3_B4_A - [15:0] */ +#define ARIZONA_EQ3_B4_A_WIDTH 16 /* EQ3_B4_A - [15:0] */ + +/* + * R3658 (0xE4A) - EQ3_15 + */ +#define ARIZONA_EQ3_B4_B_MASK 0xFFFF /* EQ3_B4_B - [15:0] */ +#define ARIZONA_EQ3_B4_B_SHIFT 0 /* EQ3_B4_B - [15:0] */ +#define ARIZONA_EQ3_B4_B_WIDTH 16 /* EQ3_B4_B - [15:0] */ + +/* + * R3659 (0xE4B) - EQ3_16 + */ +#define ARIZONA_EQ3_B4_C_MASK 0xFFFF /* EQ3_B4_C - [15:0] */ +#define ARIZONA_EQ3_B4_C_SHIFT 0 /* EQ3_B4_C - [15:0] */ +#define ARIZONA_EQ3_B4_C_WIDTH 16 /* EQ3_B4_C - [15:0] */ + +/* + * R3660 (0xE4C) - EQ3_17 + */ +#define ARIZONA_EQ3_B4_PG_MASK 0xFFFF /* EQ3_B4_PG - [15:0] */ +#define ARIZONA_EQ3_B4_PG_SHIFT 0 /* EQ3_B4_PG - [15:0] */ +#define ARIZONA_EQ3_B4_PG_WIDTH 16 /* EQ3_B4_PG - [15:0] */ + +/* + * R3661 (0xE4D) - EQ3_18 + */ +#define ARIZONA_EQ3_B5_A_MASK 0xFFFF /* EQ3_B5_A - [15:0] */ +#define ARIZONA_EQ3_B5_A_SHIFT 0 /* EQ3_B5_A - [15:0] */ +#define ARIZONA_EQ3_B5_A_WIDTH 16 /* EQ3_B5_A - [15:0] */ + +/* + * R3662 (0xE4E) - EQ3_19 + */ +#define ARIZONA_EQ3_B5_B_MASK 0xFFFF /* EQ3_B5_B - [15:0] */ +#define ARIZONA_EQ3_B5_B_SHIFT 0 /* EQ3_B5_B - [15:0] */ +#define ARIZONA_EQ3_B5_B_WIDTH 16 /* EQ3_B5_B - [15:0] */ + +/* + * R3663 (0xE4F) - EQ3_20 + */ +#define ARIZONA_EQ3_B5_PG_MASK 0xFFFF /* EQ3_B5_PG - [15:0] */ +#define ARIZONA_EQ3_B5_PG_SHIFT 0 /* EQ3_B5_PG - [15:0] */ +#define ARIZONA_EQ3_B5_PG_WIDTH 16 /* EQ3_B5_PG - [15:0] */ + +/* + * R3664 (0xE50) - EQ3_21 + */ +#define ARIZONA_EQ3_B1_C_MASK 0xFFFF /* EQ3_B1_C - [15:0] */ +#define ARIZONA_EQ3_B1_C_SHIFT 0 /* EQ3_B1_C - [15:0] */ +#define ARIZONA_EQ3_B1_C_WIDTH 16 /* EQ3_B1_C - [15:0] */ + +/* + * R3666 (0xE52) - EQ4_1 + */ +#define ARIZONA_EQ4_B1_GAIN_MASK 0xF800 /* EQ4_B1_GAIN - [15:11] */ +#define ARIZONA_EQ4_B1_GAIN_SHIFT 11 /* EQ4_B1_GAIN - [15:11] */ +#define ARIZONA_EQ4_B1_GAIN_WIDTH 5 /* EQ4_B1_GAIN - [15:11] */ +#define ARIZONA_EQ4_B2_GAIN_MASK 0x07C0 /* EQ4_B2_GAIN - [10:6] */ +#define ARIZONA_EQ4_B2_GAIN_SHIFT 6 /* EQ4_B2_GAIN - [10:6] */ +#define ARIZONA_EQ4_B2_GAIN_WIDTH 5 /* EQ4_B2_GAIN - [10:6] */ +#define ARIZONA_EQ4_B3_GAIN_MASK 0x003E /* EQ4_B3_GAIN - [5:1] */ +#define ARIZONA_EQ4_B3_GAIN_SHIFT 1 /* EQ4_B3_GAIN - [5:1] */ +#define ARIZONA_EQ4_B3_GAIN_WIDTH 5 /* EQ4_B3_GAIN - [5:1] */ +#define ARIZONA_EQ4_ENA 0x0001 /* EQ4_ENA */ +#define ARIZONA_EQ4_ENA_MASK 0x0001 /* EQ4_ENA */ +#define ARIZONA_EQ4_ENA_SHIFT 0 /* EQ4_ENA */ +#define ARIZONA_EQ4_ENA_WIDTH 1 /* EQ4_ENA */ + +/* + * R3667 (0xE53) - EQ4_2 + */ +#define ARIZONA_EQ4_B4_GAIN_MASK 0xF800 /* EQ4_B4_GAIN - [15:11] */ +#define ARIZONA_EQ4_B4_GAIN_SHIFT 11 /* EQ4_B4_GAIN - [15:11] */ +#define ARIZONA_EQ4_B4_GAIN_WIDTH 5 /* EQ4_B4_GAIN - [15:11] */ +#define ARIZONA_EQ4_B5_GAIN_MASK 0x07C0 /* EQ4_B5_GAIN - [10:6] */ +#define ARIZONA_EQ4_B5_GAIN_SHIFT 6 /* EQ4_B5_GAIN - [10:6] */ +#define ARIZONA_EQ4_B5_GAIN_WIDTH 5 /* EQ4_B5_GAIN - [10:6] */ +#define ARIZONA_EQ4_B1_MODE 0x0001 /* EQ4_B1_MODE */ +#define ARIZONA_EQ4_B1_MODE_MASK 0x0001 /* EQ4_B1_MODE */ +#define ARIZONA_EQ4_B1_MODE_SHIFT 0 /* EQ4_B1_MODE */ +#define ARIZONA_EQ4_B1_MODE_WIDTH 1 /* EQ4_B1_MODE */ + +/* + * R3668 (0xE54) - EQ4_3 + */ +#define ARIZONA_EQ4_B1_A_MASK 0xFFFF /* EQ4_B1_A - [15:0] */ +#define ARIZONA_EQ4_B1_A_SHIFT 0 /* EQ4_B1_A - [15:0] */ +#define ARIZONA_EQ4_B1_A_WIDTH 16 /* EQ4_B1_A - [15:0] */ + +/* + * R3669 (0xE55) - EQ4_4 + */ +#define ARIZONA_EQ4_B1_B_MASK 0xFFFF /* EQ4_B1_B - [15:0] */ +#define ARIZONA_EQ4_B1_B_SHIFT 0 /* EQ4_B1_B - [15:0] */ +#define ARIZONA_EQ4_B1_B_WIDTH 16 /* EQ4_B1_B - [15:0] */ + +/* + * R3670 (0xE56) - EQ4_5 + */ +#define ARIZONA_EQ4_B1_PG_MASK 0xFFFF /* EQ4_B1_PG - [15:0] */ +#define ARIZONA_EQ4_B1_PG_SHIFT 0 /* EQ4_B1_PG - [15:0] */ +#define ARIZONA_EQ4_B1_PG_WIDTH 16 /* EQ4_B1_PG - [15:0] */ + +/* + * R3671 (0xE57) - EQ4_6 + */ +#define ARIZONA_EQ4_B2_A_MASK 0xFFFF /* EQ4_B2_A - [15:0] */ +#define ARIZONA_EQ4_B2_A_SHIFT 0 /* EQ4_B2_A - [15:0] */ +#define ARIZONA_EQ4_B2_A_WIDTH 16 /* EQ4_B2_A - [15:0] */ + +/* + * R3672 (0xE58) - EQ4_7 + */ +#define ARIZONA_EQ4_B2_B_MASK 0xFFFF /* EQ4_B2_B - [15:0] */ +#define ARIZONA_EQ4_B2_B_SHIFT 0 /* EQ4_B2_B - [15:0] */ +#define ARIZONA_EQ4_B2_B_WIDTH 16 /* EQ4_B2_B - [15:0] */ + +/* + * R3673 (0xE59) - EQ4_8 + */ +#define ARIZONA_EQ4_B2_C_MASK 0xFFFF /* EQ4_B2_C - [15:0] */ +#define ARIZONA_EQ4_B2_C_SHIFT 0 /* EQ4_B2_C - [15:0] */ +#define ARIZONA_EQ4_B2_C_WIDTH 16 /* EQ4_B2_C - [15:0] */ + +/* + * R3674 (0xE5A) - EQ4_9 + */ +#define ARIZONA_EQ4_B2_PG_MASK 0xFFFF /* EQ4_B2_PG - [15:0] */ +#define ARIZONA_EQ4_B2_PG_SHIFT 0 /* EQ4_B2_PG - [15:0] */ +#define ARIZONA_EQ4_B2_PG_WIDTH 16 /* EQ4_B2_PG - [15:0] */ + +/* + * R3675 (0xE5B) - EQ4_10 + */ +#define ARIZONA_EQ4_B3_A_MASK 0xFFFF /* EQ4_B3_A - [15:0] */ +#define ARIZONA_EQ4_B3_A_SHIFT 0 /* EQ4_B3_A - [15:0] */ +#define ARIZONA_EQ4_B3_A_WIDTH 16 /* EQ4_B3_A - [15:0] */ + +/* + * R3676 (0xE5C) - EQ4_11 + */ +#define ARIZONA_EQ4_B3_B_MASK 0xFFFF /* EQ4_B3_B - [15:0] */ +#define ARIZONA_EQ4_B3_B_SHIFT 0 /* EQ4_B3_B - [15:0] */ +#define ARIZONA_EQ4_B3_B_WIDTH 16 /* EQ4_B3_B - [15:0] */ + +/* + * R3677 (0xE5D) - EQ4_12 + */ +#define ARIZONA_EQ4_B3_C_MASK 0xFFFF /* EQ4_B3_C - [15:0] */ +#define ARIZONA_EQ4_B3_C_SHIFT 0 /* EQ4_B3_C - [15:0] */ +#define ARIZONA_EQ4_B3_C_WIDTH 16 /* EQ4_B3_C - [15:0] */ + +/* + * R3678 (0xE5E) - EQ4_13 + */ +#define ARIZONA_EQ4_B3_PG_MASK 0xFFFF /* EQ4_B3_PG - [15:0] */ +#define ARIZONA_EQ4_B3_PG_SHIFT 0 /* EQ4_B3_PG - [15:0] */ +#define ARIZONA_EQ4_B3_PG_WIDTH 16 /* EQ4_B3_PG - [15:0] */ + +/* + * R3679 (0xE5F) - EQ4_14 + */ +#define ARIZONA_EQ4_B4_A_MASK 0xFFFF /* EQ4_B4_A - [15:0] */ +#define ARIZONA_EQ4_B4_A_SHIFT 0 /* EQ4_B4_A - [15:0] */ +#define ARIZONA_EQ4_B4_A_WIDTH 16 /* EQ4_B4_A - [15:0] */ + +/* + * R3680 (0xE60) - EQ4_15 + */ +#define ARIZONA_EQ4_B4_B_MASK 0xFFFF /* EQ4_B4_B - [15:0] */ +#define ARIZONA_EQ4_B4_B_SHIFT 0 /* EQ4_B4_B - [15:0] */ +#define ARIZONA_EQ4_B4_B_WIDTH 16 /* EQ4_B4_B - [15:0] */ + +/* + * R3681 (0xE61) - EQ4_16 + */ +#define ARIZONA_EQ4_B4_C_MASK 0xFFFF /* EQ4_B4_C - [15:0] */ +#define ARIZONA_EQ4_B4_C_SHIFT 0 /* EQ4_B4_C - [15:0] */ +#define ARIZONA_EQ4_B4_C_WIDTH 16 /* EQ4_B4_C - [15:0] */ + +/* + * R3682 (0xE62) - EQ4_17 + */ +#define ARIZONA_EQ4_B4_PG_MASK 0xFFFF /* EQ4_B4_PG - [15:0] */ +#define ARIZONA_EQ4_B4_PG_SHIFT 0 /* EQ4_B4_PG - [15:0] */ +#define ARIZONA_EQ4_B4_PG_WIDTH 16 /* EQ4_B4_PG - [15:0] */ + +/* + * R3683 (0xE63) - EQ4_18 + */ +#define ARIZONA_EQ4_B5_A_MASK 0xFFFF /* EQ4_B5_A - [15:0] */ +#define ARIZONA_EQ4_B5_A_SHIFT 0 /* EQ4_B5_A - [15:0] */ +#define ARIZONA_EQ4_B5_A_WIDTH 16 /* EQ4_B5_A - [15:0] */ + +/* + * R3684 (0xE64) - EQ4_19 + */ +#define ARIZONA_EQ4_B5_B_MASK 0xFFFF /* EQ4_B5_B - [15:0] */ +#define ARIZONA_EQ4_B5_B_SHIFT 0 /* EQ4_B5_B - [15:0] */ +#define ARIZONA_EQ4_B5_B_WIDTH 16 /* EQ4_B5_B - [15:0] */ + +/* + * R3685 (0xE65) - EQ4_20 + */ +#define ARIZONA_EQ4_B5_PG_MASK 0xFFFF /* EQ4_B5_PG - [15:0] */ +#define ARIZONA_EQ4_B5_PG_SHIFT 0 /* EQ4_B5_PG - [15:0] */ +#define ARIZONA_EQ4_B5_PG_WIDTH 16 /* EQ4_B5_PG - [15:0] */ + +/* + * R3686 (0xE66) - EQ4_21 + */ +#define ARIZONA_EQ4_B1_C_MASK 0xFFFF /* EQ4_B1_C - [15:0] */ +#define ARIZONA_EQ4_B1_C_SHIFT 0 /* EQ4_B1_C - [15:0] */ +#define ARIZONA_EQ4_B1_C_WIDTH 16 /* EQ4_B1_C - [15:0] */ + +/* + * R3712 (0xE80) - DRC1 ctrl1 + */ +#define ARIZONA_DRC1_SIG_DET_RMS_MASK 0xF800 /* DRC1_SIG_DET_RMS - [15:11] */ +#define ARIZONA_DRC1_SIG_DET_RMS_SHIFT 11 /* DRC1_SIG_DET_RMS - [15:11] */ +#define ARIZONA_DRC1_SIG_DET_RMS_WIDTH 5 /* DRC1_SIG_DET_RMS - [15:11] */ +#define ARIZONA_DRC1_SIG_DET_PK_MASK 0x0600 /* DRC1_SIG_DET_PK - [10:9] */ +#define ARIZONA_DRC1_SIG_DET_PK_SHIFT 9 /* DRC1_SIG_DET_PK - [10:9] */ +#define ARIZONA_DRC1_SIG_DET_PK_WIDTH 2 /* DRC1_SIG_DET_PK - [10:9] */ +#define ARIZONA_DRC1_NG_ENA 0x0100 /* DRC1_NG_ENA */ +#define ARIZONA_DRC1_NG_ENA_MASK 0x0100 /* DRC1_NG_ENA */ +#define ARIZONA_DRC1_NG_ENA_SHIFT 8 /* DRC1_NG_ENA */ +#define ARIZONA_DRC1_NG_ENA_WIDTH 1 /* DRC1_NG_ENA */ +#define ARIZONA_DRC1_SIG_DET_MODE 0x0080 /* DRC1_SIG_DET_MODE */ +#define ARIZONA_DRC1_SIG_DET_MODE_MASK 0x0080 /* DRC1_SIG_DET_MODE */ +#define ARIZONA_DRC1_SIG_DET_MODE_SHIFT 7 /* DRC1_SIG_DET_MODE */ +#define ARIZONA_DRC1_SIG_DET_MODE_WIDTH 1 /* DRC1_SIG_DET_MODE */ +#define ARIZONA_DRC1_SIG_DET 0x0040 /* DRC1_SIG_DET */ +#define ARIZONA_DRC1_SIG_DET_MASK 0x0040 /* DRC1_SIG_DET */ +#define ARIZONA_DRC1_SIG_DET_SHIFT 6 /* DRC1_SIG_DET */ +#define ARIZONA_DRC1_SIG_DET_WIDTH 1 /* DRC1_SIG_DET */ +#define ARIZONA_DRC1_KNEE2_OP_ENA 0x0020 /* DRC1_KNEE2_OP_ENA */ +#define ARIZONA_DRC1_KNEE2_OP_ENA_MASK 0x0020 /* DRC1_KNEE2_OP_ENA */ +#define ARIZONA_DRC1_KNEE2_OP_ENA_SHIFT 5 /* DRC1_KNEE2_OP_ENA */ +#define ARIZONA_DRC1_KNEE2_OP_ENA_WIDTH 1 /* DRC1_KNEE2_OP_ENA */ +#define ARIZONA_DRC1_QR 0x0010 /* DRC1_QR */ +#define ARIZONA_DRC1_QR_MASK 0x0010 /* DRC1_QR */ +#define ARIZONA_DRC1_QR_SHIFT 4 /* DRC1_QR */ +#define ARIZONA_DRC1_QR_WIDTH 1 /* DRC1_QR */ +#define ARIZONA_DRC1_ANTICLIP 0x0008 /* DRC1_ANTICLIP */ +#define ARIZONA_DRC1_ANTICLIP_MASK 0x0008 /* DRC1_ANTICLIP */ +#define ARIZONA_DRC1_ANTICLIP_SHIFT 3 /* DRC1_ANTICLIP */ +#define ARIZONA_DRC1_ANTICLIP_WIDTH 1 /* DRC1_ANTICLIP */ +#define ARIZONA_DRC1L_ENA 0x0002 /* DRC1L_ENA */ +#define ARIZONA_DRC1L_ENA_MASK 0x0002 /* DRC1L_ENA */ +#define ARIZONA_DRC1L_ENA_SHIFT 1 /* DRC1L_ENA */ +#define ARIZONA_DRC1L_ENA_WIDTH 1 /* DRC1L_ENA */ +#define ARIZONA_DRC1R_ENA 0x0001 /* DRC1R_ENA */ +#define ARIZONA_DRC1R_ENA_MASK 0x0001 /* DRC1R_ENA */ +#define ARIZONA_DRC1R_ENA_SHIFT 0 /* DRC1R_ENA */ +#define ARIZONA_DRC1R_ENA_WIDTH 1 /* DRC1R_ENA */ + +/* + * R3713 (0xE81) - DRC1 ctrl2 + */ +#define ARIZONA_DRC1_ATK_MASK 0x1E00 /* DRC1_ATK - [12:9] */ +#define ARIZONA_DRC1_ATK_SHIFT 9 /* DRC1_ATK - [12:9] */ +#define ARIZONA_DRC1_ATK_WIDTH 4 /* DRC1_ATK - [12:9] */ +#define ARIZONA_DRC1_DCY_MASK 0x01E0 /* DRC1_DCY - [8:5] */ +#define ARIZONA_DRC1_DCY_SHIFT 5 /* DRC1_DCY - [8:5] */ +#define ARIZONA_DRC1_DCY_WIDTH 4 /* DRC1_DCY - [8:5] */ +#define ARIZONA_DRC1_MINGAIN_MASK 0x001C /* DRC1_MINGAIN - [4:2] */ +#define ARIZONA_DRC1_MINGAIN_SHIFT 2 /* DRC1_MINGAIN - [4:2] */ +#define ARIZONA_DRC1_MINGAIN_WIDTH 3 /* DRC1_MINGAIN - [4:2] */ +#define ARIZONA_DRC1_MAXGAIN_MASK 0x0003 /* DRC1_MAXGAIN - [1:0] */ +#define ARIZONA_DRC1_MAXGAIN_SHIFT 0 /* DRC1_MAXGAIN - [1:0] */ +#define ARIZONA_DRC1_MAXGAIN_WIDTH 2 /* DRC1_MAXGAIN - [1:0] */ + +/* + * R3714 (0xE82) - DRC1 ctrl3 + */ +#define ARIZONA_DRC1_NG_MINGAIN_MASK 0xF000 /* DRC1_NG_MINGAIN - [15:12] */ +#define ARIZONA_DRC1_NG_MINGAIN_SHIFT 12 /* DRC1_NG_MINGAIN - [15:12] */ +#define ARIZONA_DRC1_NG_MINGAIN_WIDTH 4 /* DRC1_NG_MINGAIN - [15:12] */ +#define ARIZONA_DRC1_NG_EXP_MASK 0x0C00 /* DRC1_NG_EXP - [11:10] */ +#define ARIZONA_DRC1_NG_EXP_SHIFT 10 /* DRC1_NG_EXP - [11:10] */ +#define ARIZONA_DRC1_NG_EXP_WIDTH 2 /* DRC1_NG_EXP - [11:10] */ +#define ARIZONA_DRC1_QR_THR_MASK 0x0300 /* DRC1_QR_THR - [9:8] */ +#define ARIZONA_DRC1_QR_THR_SHIFT 8 /* DRC1_QR_THR - [9:8] */ +#define ARIZONA_DRC1_QR_THR_WIDTH 2 /* DRC1_QR_THR - [9:8] */ +#define ARIZONA_DRC1_QR_DCY_MASK 0x00C0 /* DRC1_QR_DCY - [7:6] */ +#define ARIZONA_DRC1_QR_DCY_SHIFT 6 /* DRC1_QR_DCY - [7:6] */ +#define ARIZONA_DRC1_QR_DCY_WIDTH 2 /* DRC1_QR_DCY - [7:6] */ +#define ARIZONA_DRC1_HI_COMP_MASK 0x0038 /* DRC1_HI_COMP - [5:3] */ +#define ARIZONA_DRC1_HI_COMP_SHIFT 3 /* DRC1_HI_COMP - [5:3] */ +#define ARIZONA_DRC1_HI_COMP_WIDTH 3 /* DRC1_HI_COMP - [5:3] */ +#define ARIZONA_DRC1_LO_COMP_MASK 0x0007 /* DRC1_LO_COMP - [2:0] */ +#define ARIZONA_DRC1_LO_COMP_SHIFT 0 /* DRC1_LO_COMP - [2:0] */ +#define ARIZONA_DRC1_LO_COMP_WIDTH 3 /* DRC1_LO_COMP - [2:0] */ + +/* + * R3715 (0xE83) - DRC1 ctrl4 + */ +#define ARIZONA_DRC1_KNEE_IP_MASK 0x07E0 /* DRC1_KNEE_IP - [10:5] */ +#define ARIZONA_DRC1_KNEE_IP_SHIFT 5 /* DRC1_KNEE_IP - [10:5] */ +#define ARIZONA_DRC1_KNEE_IP_WIDTH 6 /* DRC1_KNEE_IP - [10:5] */ +#define ARIZONA_DRC1_KNEE_OP_MASK 0x001F /* DRC1_KNEE_OP - [4:0] */ +#define ARIZONA_DRC1_KNEE_OP_SHIFT 0 /* DRC1_KNEE_OP - [4:0] */ +#define ARIZONA_DRC1_KNEE_OP_WIDTH 5 /* DRC1_KNEE_OP - [4:0] */ + +/* + * R3716 (0xE84) - DRC1 ctrl5 + */ +#define ARIZONA_DRC1_KNEE2_IP_MASK 0x03E0 /* DRC1_KNEE2_IP - [9:5] */ +#define ARIZONA_DRC1_KNEE2_IP_SHIFT 5 /* DRC1_KNEE2_IP - [9:5] */ +#define ARIZONA_DRC1_KNEE2_IP_WIDTH 5 /* DRC1_KNEE2_IP - [9:5] */ +#define ARIZONA_DRC1_KNEE2_OP_MASK 0x001F /* DRC1_KNEE2_OP - [4:0] */ +#define ARIZONA_DRC1_KNEE2_OP_SHIFT 0 /* DRC1_KNEE2_OP - [4:0] */ +#define ARIZONA_DRC1_KNEE2_OP_WIDTH 5 /* DRC1_KNEE2_OP - [4:0] */ + +/* + * R3721 (0xE89) - DRC2 ctrl1 + */ +#define ARIZONA_DRC2_SIG_DET_RMS_MASK 0xF800 /* DRC2_SIG_DET_RMS - [15:11] */ +#define ARIZONA_DRC2_SIG_DET_RMS_SHIFT 11 /* DRC2_SIG_DET_RMS - [15:11] */ +#define ARIZONA_DRC2_SIG_DET_RMS_WIDTH 5 /* DRC2_SIG_DET_RMS - [15:11] */ +#define ARIZONA_DRC2_SIG_DET_PK_MASK 0x0600 /* DRC2_SIG_DET_PK - [10:9] */ +#define ARIZONA_DRC2_SIG_DET_PK_SHIFT 9 /* DRC2_SIG_DET_PK - [10:9] */ +#define ARIZONA_DRC2_SIG_DET_PK_WIDTH 2 /* DRC2_SIG_DET_PK - [10:9] */ +#define ARIZONA_DRC2_NG_ENA 0x0100 /* DRC2_NG_ENA */ +#define ARIZONA_DRC2_NG_ENA_MASK 0x0100 /* DRC2_NG_ENA */ +#define ARIZONA_DRC2_NG_ENA_SHIFT 8 /* DRC2_NG_ENA */ +#define ARIZONA_DRC2_NG_ENA_WIDTH 1 /* DRC2_NG_ENA */ +#define ARIZONA_DRC2_SIG_DET_MODE 0x0080 /* DRC2_SIG_DET_MODE */ +#define ARIZONA_DRC2_SIG_DET_MODE_MASK 0x0080 /* DRC2_SIG_DET_MODE */ +#define ARIZONA_DRC2_SIG_DET_MODE_SHIFT 7 /* DRC2_SIG_DET_MODE */ +#define ARIZONA_DRC2_SIG_DET_MODE_WIDTH 1 /* DRC2_SIG_DET_MODE */ +#define ARIZONA_DRC2_SIG_DET 0x0040 /* DRC2_SIG_DET */ +#define ARIZONA_DRC2_SIG_DET_MASK 0x0040 /* DRC2_SIG_DET */ +#define ARIZONA_DRC2_SIG_DET_SHIFT 6 /* DRC2_SIG_DET */ +#define ARIZONA_DRC2_SIG_DET_WIDTH 1 /* DRC2_SIG_DET */ +#define ARIZONA_DRC2_KNEE2_OP_ENA 0x0020 /* DRC2_KNEE2_OP_ENA */ +#define ARIZONA_DRC2_KNEE2_OP_ENA_MASK 0x0020 /* DRC2_KNEE2_OP_ENA */ +#define ARIZONA_DRC2_KNEE2_OP_ENA_SHIFT 5 /* DRC2_KNEE2_OP_ENA */ +#define ARIZONA_DRC2_KNEE2_OP_ENA_WIDTH 1 /* DRC2_KNEE2_OP_ENA */ +#define ARIZONA_DRC2_QR 0x0010 /* DRC2_QR */ +#define ARIZONA_DRC2_QR_MASK 0x0010 /* DRC2_QR */ +#define ARIZONA_DRC2_QR_SHIFT 4 /* DRC2_QR */ +#define ARIZONA_DRC2_QR_WIDTH 1 /* DRC2_QR */ +#define ARIZONA_DRC2_ANTICLIP 0x0008 /* DRC2_ANTICLIP */ +#define ARIZONA_DRC2_ANTICLIP_MASK 0x0008 /* DRC2_ANTICLIP */ +#define ARIZONA_DRC2_ANTICLIP_SHIFT 3 /* DRC2_ANTICLIP */ +#define ARIZONA_DRC2_ANTICLIP_WIDTH 1 /* DRC2_ANTICLIP */ +#define ARIZONA_DRC2L_ENA 0x0002 /* DRC2L_ENA */ +#define ARIZONA_DRC2L_ENA_MASK 0x0002 /* DRC2L_ENA */ +#define ARIZONA_DRC2L_ENA_SHIFT 1 /* DRC2L_ENA */ +#define ARIZONA_DRC2L_ENA_WIDTH 1 /* DRC2L_ENA */ +#define ARIZONA_DRC2R_ENA 0x0001 /* DRC2R_ENA */ +#define ARIZONA_DRC2R_ENA_MASK 0x0001 /* DRC2R_ENA */ +#define ARIZONA_DRC2R_ENA_SHIFT 0 /* DRC2R_ENA */ +#define ARIZONA_DRC2R_ENA_WIDTH 1 /* DRC2R_ENA */ + +/* + * R3722 (0xE8A) - DRC2 ctrl2 + */ +#define ARIZONA_DRC2_ATK_MASK 0x1E00 /* DRC2_ATK - [12:9] */ +#define ARIZONA_DRC2_ATK_SHIFT 9 /* DRC2_ATK - [12:9] */ +#define ARIZONA_DRC2_ATK_WIDTH 4 /* DRC2_ATK - [12:9] */ +#define ARIZONA_DRC2_DCY_MASK 0x01E0 /* DRC2_DCY - [8:5] */ +#define ARIZONA_DRC2_DCY_SHIFT 5 /* DRC2_DCY - [8:5] */ +#define ARIZONA_DRC2_DCY_WIDTH 4 /* DRC2_DCY - [8:5] */ +#define ARIZONA_DRC2_MINGAIN_MASK 0x001C /* DRC2_MINGAIN - [4:2] */ +#define ARIZONA_DRC2_MINGAIN_SHIFT 2 /* DRC2_MINGAIN - [4:2] */ +#define ARIZONA_DRC2_MINGAIN_WIDTH 3 /* DRC2_MINGAIN - [4:2] */ +#define ARIZONA_DRC2_MAXGAIN_MASK 0x0003 /* DRC2_MAXGAIN - [1:0] */ +#define ARIZONA_DRC2_MAXGAIN_SHIFT 0 /* DRC2_MAXGAIN - [1:0] */ +#define ARIZONA_DRC2_MAXGAIN_WIDTH 2 /* DRC2_MAXGAIN - [1:0] */ + +/* + * R3723 (0xE8B) - DRC2 ctrl3 + */ +#define ARIZONA_DRC2_NG_MINGAIN_MASK 0xF000 /* DRC2_NG_MINGAIN - [15:12] */ +#define ARIZONA_DRC2_NG_MINGAIN_SHIFT 12 /* DRC2_NG_MINGAIN - [15:12] */ +#define ARIZONA_DRC2_NG_MINGAIN_WIDTH 4 /* DRC2_NG_MINGAIN - [15:12] */ +#define ARIZONA_DRC2_NG_EXP_MASK 0x0C00 /* DRC2_NG_EXP - [11:10] */ +#define ARIZONA_DRC2_NG_EXP_SHIFT 10 /* DRC2_NG_EXP - [11:10] */ +#define ARIZONA_DRC2_NG_EXP_WIDTH 2 /* DRC2_NG_EXP - [11:10] */ +#define ARIZONA_DRC2_QR_THR_MASK 0x0300 /* DRC2_QR_THR - [9:8] */ +#define ARIZONA_DRC2_QR_THR_SHIFT 8 /* DRC2_QR_THR - [9:8] */ +#define ARIZONA_DRC2_QR_THR_WIDTH 2 /* DRC2_QR_THR - [9:8] */ +#define ARIZONA_DRC2_QR_DCY_MASK 0x00C0 /* DRC2_QR_DCY - [7:6] */ +#define ARIZONA_DRC2_QR_DCY_SHIFT 6 /* DRC2_QR_DCY - [7:6] */ +#define ARIZONA_DRC2_QR_DCY_WIDTH 2 /* DRC2_QR_DCY - [7:6] */ +#define ARIZONA_DRC2_HI_COMP_MASK 0x0038 /* DRC2_HI_COMP - [5:3] */ +#define ARIZONA_DRC2_HI_COMP_SHIFT 3 /* DRC2_HI_COMP - [5:3] */ +#define ARIZONA_DRC2_HI_COMP_WIDTH 3 /* DRC2_HI_COMP - [5:3] */ +#define ARIZONA_DRC2_LO_COMP_MASK 0x0007 /* DRC2_LO_COMP - [2:0] */ +#define ARIZONA_DRC2_LO_COMP_SHIFT 0 /* DRC2_LO_COMP - [2:0] */ +#define ARIZONA_DRC2_LO_COMP_WIDTH 3 /* DRC2_LO_COMP - [2:0] */ + +/* + * R3724 (0xE8C) - DRC2 ctrl4 + */ +#define ARIZONA_DRC2_KNEE_IP_MASK 0x07E0 /* DRC2_KNEE_IP - [10:5] */ +#define ARIZONA_DRC2_KNEE_IP_SHIFT 5 /* DRC2_KNEE_IP - [10:5] */ +#define ARIZONA_DRC2_KNEE_IP_WIDTH 6 /* DRC2_KNEE_IP - [10:5] */ +#define ARIZONA_DRC2_KNEE_OP_MASK 0x001F /* DRC2_KNEE_OP - [4:0] */ +#define ARIZONA_DRC2_KNEE_OP_SHIFT 0 /* DRC2_KNEE_OP - [4:0] */ +#define ARIZONA_DRC2_KNEE_OP_WIDTH 5 /* DRC2_KNEE_OP - [4:0] */ + +/* + * R3725 (0xE8D) - DRC2 ctrl5 + */ +#define ARIZONA_DRC2_KNEE2_IP_MASK 0x03E0 /* DRC2_KNEE2_IP - [9:5] */ +#define ARIZONA_DRC2_KNEE2_IP_SHIFT 5 /* DRC2_KNEE2_IP - [9:5] */ +#define ARIZONA_DRC2_KNEE2_IP_WIDTH 5 /* DRC2_KNEE2_IP - [9:5] */ +#define ARIZONA_DRC2_KNEE2_OP_MASK 0x001F /* DRC2_KNEE2_OP - [4:0] */ +#define ARIZONA_DRC2_KNEE2_OP_SHIFT 0 /* DRC2_KNEE2_OP - [4:0] */ +#define ARIZONA_DRC2_KNEE2_OP_WIDTH 5 /* DRC2_KNEE2_OP - [4:0] */ + +/* + * R3776 (0xEC0) - HPLPF1_1 + */ +#define ARIZONA_LHPF1_MODE 0x0002 /* LHPF1_MODE */ +#define ARIZONA_LHPF1_MODE_MASK 0x0002 /* LHPF1_MODE */ +#define ARIZONA_LHPF1_MODE_SHIFT 1 /* LHPF1_MODE */ +#define ARIZONA_LHPF1_MODE_WIDTH 1 /* LHPF1_MODE */ +#define ARIZONA_LHPF1_ENA 0x0001 /* LHPF1_ENA */ +#define ARIZONA_LHPF1_ENA_MASK 0x0001 /* LHPF1_ENA */ +#define ARIZONA_LHPF1_ENA_SHIFT 0 /* LHPF1_ENA */ +#define ARIZONA_LHPF1_ENA_WIDTH 1 /* LHPF1_ENA */ + +/* + * R3777 (0xEC1) - HPLPF1_2 + */ +#define ARIZONA_LHPF1_COEFF_MASK 0xFFFF /* LHPF1_COEFF - [15:0] */ +#define ARIZONA_LHPF1_COEFF_SHIFT 0 /* LHPF1_COEFF - [15:0] */ +#define ARIZONA_LHPF1_COEFF_WIDTH 16 /* LHPF1_COEFF - [15:0] */ + +/* + * R3780 (0xEC4) - HPLPF2_1 + */ +#define ARIZONA_LHPF2_MODE 0x0002 /* LHPF2_MODE */ +#define ARIZONA_LHPF2_MODE_MASK 0x0002 /* LHPF2_MODE */ +#define ARIZONA_LHPF2_MODE_SHIFT 1 /* LHPF2_MODE */ +#define ARIZONA_LHPF2_MODE_WIDTH 1 /* LHPF2_MODE */ +#define ARIZONA_LHPF2_ENA 0x0001 /* LHPF2_ENA */ +#define ARIZONA_LHPF2_ENA_MASK 0x0001 /* LHPF2_ENA */ +#define ARIZONA_LHPF2_ENA_SHIFT 0 /* LHPF2_ENA */ +#define ARIZONA_LHPF2_ENA_WIDTH 1 /* LHPF2_ENA */ + +/* + * R3781 (0xEC5) - HPLPF2_2 + */ +#define ARIZONA_LHPF2_COEFF_MASK 0xFFFF /* LHPF2_COEFF - [15:0] */ +#define ARIZONA_LHPF2_COEFF_SHIFT 0 /* LHPF2_COEFF - [15:0] */ +#define ARIZONA_LHPF2_COEFF_WIDTH 16 /* LHPF2_COEFF - [15:0] */ + +/* + * R3784 (0xEC8) - HPLPF3_1 + */ +#define ARIZONA_LHPF3_MODE 0x0002 /* LHPF3_MODE */ +#define ARIZONA_LHPF3_MODE_MASK 0x0002 /* LHPF3_MODE */ +#define ARIZONA_LHPF3_MODE_SHIFT 1 /* LHPF3_MODE */ +#define ARIZONA_LHPF3_MODE_WIDTH 1 /* LHPF3_MODE */ +#define ARIZONA_LHPF3_ENA 0x0001 /* LHPF3_ENA */ +#define ARIZONA_LHPF3_ENA_MASK 0x0001 /* LHPF3_ENA */ +#define ARIZONA_LHPF3_ENA_SHIFT 0 /* LHPF3_ENA */ +#define ARIZONA_LHPF3_ENA_WIDTH 1 /* LHPF3_ENA */ + +/* + * R3785 (0xEC9) - HPLPF3_2 + */ +#define ARIZONA_LHPF3_COEFF_MASK 0xFFFF /* LHPF3_COEFF - [15:0] */ +#define ARIZONA_LHPF3_COEFF_SHIFT 0 /* LHPF3_COEFF - [15:0] */ +#define ARIZONA_LHPF3_COEFF_WIDTH 16 /* LHPF3_COEFF - [15:0] */ + +/* + * R3788 (0xECC) - HPLPF4_1 + */ +#define ARIZONA_LHPF4_MODE 0x0002 /* LHPF4_MODE */ +#define ARIZONA_LHPF4_MODE_MASK 0x0002 /* LHPF4_MODE */ +#define ARIZONA_LHPF4_MODE_SHIFT 1 /* LHPF4_MODE */ +#define ARIZONA_LHPF4_MODE_WIDTH 1 /* LHPF4_MODE */ +#define ARIZONA_LHPF4_ENA 0x0001 /* LHPF4_ENA */ +#define ARIZONA_LHPF4_ENA_MASK 0x0001 /* LHPF4_ENA */ +#define ARIZONA_LHPF4_ENA_SHIFT 0 /* LHPF4_ENA */ +#define ARIZONA_LHPF4_ENA_WIDTH 1 /* LHPF4_ENA */ + +/* + * R3789 (0xECD) - HPLPF4_2 + */ +#define ARIZONA_LHPF4_COEFF_MASK 0xFFFF /* LHPF4_COEFF - [15:0] */ +#define ARIZONA_LHPF4_COEFF_SHIFT 0 /* LHPF4_COEFF - [15:0] */ +#define ARIZONA_LHPF4_COEFF_WIDTH 16 /* LHPF4_COEFF - [15:0] */ + +/* + * R3808 (0xEE0) - ASRC_ENABLE + */ +#define ARIZONA_ASRC2L_ENA 0x0008 /* ASRC2L_ENA */ +#define ARIZONA_ASRC2L_ENA_MASK 0x0008 /* ASRC2L_ENA */ +#define ARIZONA_ASRC2L_ENA_SHIFT 3 /* ASRC2L_ENA */ +#define ARIZONA_ASRC2L_ENA_WIDTH 1 /* ASRC2L_ENA */ +#define ARIZONA_ASRC2R_ENA 0x0004 /* ASRC2R_ENA */ +#define ARIZONA_ASRC2R_ENA_MASK 0x0004 /* ASRC2R_ENA */ +#define ARIZONA_ASRC2R_ENA_SHIFT 2 /* ASRC2R_ENA */ +#define ARIZONA_ASRC2R_ENA_WIDTH 1 /* ASRC2R_ENA */ +#define ARIZONA_ASRC1L_ENA 0x0002 /* ASRC1L_ENA */ +#define ARIZONA_ASRC1L_ENA_MASK 0x0002 /* ASRC1L_ENA */ +#define ARIZONA_ASRC1L_ENA_SHIFT 1 /* ASRC1L_ENA */ +#define ARIZONA_ASRC1L_ENA_WIDTH 1 /* ASRC1L_ENA */ +#define ARIZONA_ASRC1R_ENA 0x0001 /* ASRC1R_ENA */ +#define ARIZONA_ASRC1R_ENA_MASK 0x0001 /* ASRC1R_ENA */ +#define ARIZONA_ASRC1R_ENA_SHIFT 0 /* ASRC1R_ENA */ +#define ARIZONA_ASRC1R_ENA_WIDTH 1 /* ASRC1R_ENA */ + +/* + * R3810 (0xEE2) - ASRC_RATE1 + */ +#define ARIZONA_ASRC_RATE1_MASK 0x7800 /* ASRC_RATE1 - [14:11] */ +#define ARIZONA_ASRC_RATE1_SHIFT 11 /* ASRC_RATE1 - [14:11] */ +#define ARIZONA_ASRC_RATE1_WIDTH 4 /* ASRC_RATE1 - [14:11] */ + +/* + * R3811 (0xEE3) - ASRC_RATE2 + */ +#define ARIZONA_ASRC_RATE2_MASK 0x7800 /* ASRC_RATE2 - [14:11] */ +#define ARIZONA_ASRC_RATE2_SHIFT 11 /* ASRC_RATE2 - [14:11] */ +#define ARIZONA_ASRC_RATE2_WIDTH 4 /* ASRC_RATE2 - [14:11] */ + +/* + * R3824 (0xEF0) - ISRC 1 CTRL 1 + */ +#define ARIZONA_ISRC1_FSH_MASK 0x7800 /* ISRC1_FSH - [14:11] */ +#define ARIZONA_ISRC1_FSH_SHIFT 11 /* ISRC1_FSH - [14:11] */ +#define ARIZONA_ISRC1_FSH_WIDTH 4 /* ISRC1_FSH - [14:11] */ +#define ARIZONA_ISRC1_CLK_SEL_MASK 0x0700 /* ISRC1_CLK_SEL - [10:8] */ +#define ARIZONA_ISRC1_CLK_SEL_SHIFT 8 /* ISRC1_CLK_SEL - [10:8] */ +#define ARIZONA_ISRC1_CLK_SEL_WIDTH 3 /* ISRC1_CLK_SEL - [10:8] */ + +/* + * R3825 (0xEF1) - ISRC 1 CTRL 2 + */ +#define ARIZONA_ISRC1_FSL_MASK 0x7800 /* ISRC1_FSL - [14:11] */ +#define ARIZONA_ISRC1_FSL_SHIFT 11 /* ISRC1_FSL - [14:11] */ +#define ARIZONA_ISRC1_FSL_WIDTH 4 /* ISRC1_FSL - [14:11] */ + +/* + * R3826 (0xEF2) - ISRC 1 CTRL 3 + */ +#define ARIZONA_ISRC1_INT0_ENA 0x8000 /* ISRC1_INT0_ENA */ +#define ARIZONA_ISRC1_INT0_ENA_MASK 0x8000 /* ISRC1_INT0_ENA */ +#define ARIZONA_ISRC1_INT0_ENA_SHIFT 15 /* ISRC1_INT0_ENA */ +#define ARIZONA_ISRC1_INT0_ENA_WIDTH 1 /* ISRC1_INT0_ENA */ +#define ARIZONA_ISRC1_INT1_ENA 0x4000 /* ISRC1_INT1_ENA */ +#define ARIZONA_ISRC1_INT1_ENA_MASK 0x4000 /* ISRC1_INT1_ENA */ +#define ARIZONA_ISRC1_INT1_ENA_SHIFT 14 /* ISRC1_INT1_ENA */ +#define ARIZONA_ISRC1_INT1_ENA_WIDTH 1 /* ISRC1_INT1_ENA */ +#define ARIZONA_ISRC1_INT2_ENA 0x2000 /* ISRC1_INT2_ENA */ +#define ARIZONA_ISRC1_INT2_ENA_MASK 0x2000 /* ISRC1_INT2_ENA */ +#define ARIZONA_ISRC1_INT2_ENA_SHIFT 13 /* ISRC1_INT2_ENA */ +#define ARIZONA_ISRC1_INT2_ENA_WIDTH 1 /* ISRC1_INT2_ENA */ +#define ARIZONA_ISRC1_INT3_ENA 0x1000 /* ISRC1_INT3_ENA */ +#define ARIZONA_ISRC1_INT3_ENA_MASK 0x1000 /* ISRC1_INT3_ENA */ +#define ARIZONA_ISRC1_INT3_ENA_SHIFT 12 /* ISRC1_INT3_ENA */ +#define ARIZONA_ISRC1_INT3_ENA_WIDTH 1 /* ISRC1_INT3_ENA */ +#define ARIZONA_ISRC1_DEC0_ENA 0x0200 /* ISRC1_DEC0_ENA */ +#define ARIZONA_ISRC1_DEC0_ENA_MASK 0x0200 /* ISRC1_DEC0_ENA */ +#define ARIZONA_ISRC1_DEC0_ENA_SHIFT 9 /* ISRC1_DEC0_ENA */ +#define ARIZONA_ISRC1_DEC0_ENA_WIDTH 1 /* ISRC1_DEC0_ENA */ +#define ARIZONA_ISRC1_DEC1_ENA 0x0100 /* ISRC1_DEC1_ENA */ +#define ARIZONA_ISRC1_DEC1_ENA_MASK 0x0100 /* ISRC1_DEC1_ENA */ +#define ARIZONA_ISRC1_DEC1_ENA_SHIFT 8 /* ISRC1_DEC1_ENA */ +#define ARIZONA_ISRC1_DEC1_ENA_WIDTH 1 /* ISRC1_DEC1_ENA */ +#define ARIZONA_ISRC1_DEC2_ENA 0x0080 /* ISRC1_DEC2_ENA */ +#define ARIZONA_ISRC1_DEC2_ENA_MASK 0x0080 /* ISRC1_DEC2_ENA */ +#define ARIZONA_ISRC1_DEC2_ENA_SHIFT 7 /* ISRC1_DEC2_ENA */ +#define ARIZONA_ISRC1_DEC2_ENA_WIDTH 1 /* ISRC1_DEC2_ENA */ +#define ARIZONA_ISRC1_DEC3_ENA 0x0040 /* ISRC1_DEC3_ENA */ +#define ARIZONA_ISRC1_DEC3_ENA_MASK 0x0040 /* ISRC1_DEC3_ENA */ +#define ARIZONA_ISRC1_DEC3_ENA_SHIFT 6 /* ISRC1_DEC3_ENA */ +#define ARIZONA_ISRC1_DEC3_ENA_WIDTH 1 /* ISRC1_DEC3_ENA */ +#define ARIZONA_ISRC1_NOTCH_ENA 0x0001 /* ISRC1_NOTCH_ENA */ +#define ARIZONA_ISRC1_NOTCH_ENA_MASK 0x0001 /* ISRC1_NOTCH_ENA */ +#define ARIZONA_ISRC1_NOTCH_ENA_SHIFT 0 /* ISRC1_NOTCH_ENA */ +#define ARIZONA_ISRC1_NOTCH_ENA_WIDTH 1 /* ISRC1_NOTCH_ENA */ + +/* + * R3827 (0xEF3) - ISRC 2 CTRL 1 + */ +#define ARIZONA_ISRC2_FSH_MASK 0x7800 /* ISRC2_FSH - [14:11] */ +#define ARIZONA_ISRC2_FSH_SHIFT 11 /* ISRC2_FSH - [14:11] */ +#define ARIZONA_ISRC2_FSH_WIDTH 4 /* ISRC2_FSH - [14:11] */ +#define ARIZONA_ISRC2_CLK_SEL_MASK 0x0700 /* ISRC2_CLK_SEL - [10:8] */ +#define ARIZONA_ISRC2_CLK_SEL_SHIFT 8 /* ISRC2_CLK_SEL - [10:8] */ +#define ARIZONA_ISRC2_CLK_SEL_WIDTH 3 /* ISRC2_CLK_SEL - [10:8] */ + +/* + * R3828 (0xEF4) - ISRC 2 CTRL 2 + */ +#define ARIZONA_ISRC2_FSL_MASK 0x7800 /* ISRC2_FSL - [14:11] */ +#define ARIZONA_ISRC2_FSL_SHIFT 11 /* ISRC2_FSL - [14:11] */ +#define ARIZONA_ISRC2_FSL_WIDTH 4 /* ISRC2_FSL - [14:11] */ + +/* + * R3829 (0xEF5) - ISRC 2 CTRL 3 + */ +#define ARIZONA_ISRC2_INT0_ENA 0x8000 /* ISRC2_INT0_ENA */ +#define ARIZONA_ISRC2_INT0_ENA_MASK 0x8000 /* ISRC2_INT0_ENA */ +#define ARIZONA_ISRC2_INT0_ENA_SHIFT 15 /* ISRC2_INT0_ENA */ +#define ARIZONA_ISRC2_INT0_ENA_WIDTH 1 /* ISRC2_INT0_ENA */ +#define ARIZONA_ISRC2_INT1_ENA 0x4000 /* ISRC2_INT1_ENA */ +#define ARIZONA_ISRC2_INT1_ENA_MASK 0x4000 /* ISRC2_INT1_ENA */ +#define ARIZONA_ISRC2_INT1_ENA_SHIFT 14 /* ISRC2_INT1_ENA */ +#define ARIZONA_ISRC2_INT1_ENA_WIDTH 1 /* ISRC2_INT1_ENA */ +#define ARIZONA_ISRC2_INT2_ENA 0x2000 /* ISRC2_INT2_ENA */ +#define ARIZONA_ISRC2_INT2_ENA_MASK 0x2000 /* ISRC2_INT2_ENA */ +#define ARIZONA_ISRC2_INT2_ENA_SHIFT 13 /* ISRC2_INT2_ENA */ +#define ARIZONA_ISRC2_INT2_ENA_WIDTH 1 /* ISRC2_INT2_ENA */ +#define ARIZONA_ISRC2_INT3_ENA 0x1000 /* ISRC2_INT3_ENA */ +#define ARIZONA_ISRC2_INT3_ENA_MASK 0x1000 /* ISRC2_INT3_ENA */ +#define ARIZONA_ISRC2_INT3_ENA_SHIFT 12 /* ISRC2_INT3_ENA */ +#define ARIZONA_ISRC2_INT3_ENA_WIDTH 1 /* ISRC2_INT3_ENA */ +#define ARIZONA_ISRC2_DEC0_ENA 0x0200 /* ISRC2_DEC0_ENA */ +#define ARIZONA_ISRC2_DEC0_ENA_MASK 0x0200 /* ISRC2_DEC0_ENA */ +#define ARIZONA_ISRC2_DEC0_ENA_SHIFT 9 /* ISRC2_DEC0_ENA */ +#define ARIZONA_ISRC2_DEC0_ENA_WIDTH 1 /* ISRC2_DEC0_ENA */ +#define ARIZONA_ISRC2_DEC1_ENA 0x0100 /* ISRC2_DEC1_ENA */ +#define ARIZONA_ISRC2_DEC1_ENA_MASK 0x0100 /* ISRC2_DEC1_ENA */ +#define ARIZONA_ISRC2_DEC1_ENA_SHIFT 8 /* ISRC2_DEC1_ENA */ +#define ARIZONA_ISRC2_DEC1_ENA_WIDTH 1 /* ISRC2_DEC1_ENA */ +#define ARIZONA_ISRC2_DEC2_ENA 0x0080 /* ISRC2_DEC2_ENA */ +#define ARIZONA_ISRC2_DEC2_ENA_MASK 0x0080 /* ISRC2_DEC2_ENA */ +#define ARIZONA_ISRC2_DEC2_ENA_SHIFT 7 /* ISRC2_DEC2_ENA */ +#define ARIZONA_ISRC2_DEC2_ENA_WIDTH 1 /* ISRC2_DEC2_ENA */ +#define ARIZONA_ISRC2_DEC3_ENA 0x0040 /* ISRC2_DEC3_ENA */ +#define ARIZONA_ISRC2_DEC3_ENA_MASK 0x0040 /* ISRC2_DEC3_ENA */ +#define ARIZONA_ISRC2_DEC3_ENA_SHIFT 6 /* ISRC2_DEC3_ENA */ +#define ARIZONA_ISRC2_DEC3_ENA_WIDTH 1 /* ISRC2_DEC3_ENA */ +#define ARIZONA_ISRC2_NOTCH_ENA 0x0001 /* ISRC2_NOTCH_ENA */ +#define ARIZONA_ISRC2_NOTCH_ENA_MASK 0x0001 /* ISRC2_NOTCH_ENA */ +#define ARIZONA_ISRC2_NOTCH_ENA_SHIFT 0 /* ISRC2_NOTCH_ENA */ +#define ARIZONA_ISRC2_NOTCH_ENA_WIDTH 1 /* ISRC2_NOTCH_ENA */ + +/* + * R3830 (0xEF6) - ISRC 3 CTRL 1 + */ +#define ARIZONA_ISRC3_FSH_MASK 0x7800 /* ISRC3_FSH - [14:11] */ +#define ARIZONA_ISRC3_FSH_SHIFT 11 /* ISRC3_FSH - [14:11] */ +#define ARIZONA_ISRC3_FSH_WIDTH 4 /* ISRC3_FSH - [14:11] */ +#define ARIZONA_ISRC3_CLK_SEL_MASK 0x0700 /* ISRC3_CLK_SEL - [10:8] */ +#define ARIZONA_ISRC3_CLK_SEL_SHIFT 8 /* ISRC3_CLK_SEL - [10:8] */ +#define ARIZONA_ISRC3_CLK_SEL_WIDTH 3 /* ISRC3_CLK_SEL - [10:8] */ + +/* + * R3831 (0xEF7) - ISRC 3 CTRL 2 + */ +#define ARIZONA_ISRC3_FSL_MASK 0x7800 /* ISRC3_FSL - [14:11] */ +#define ARIZONA_ISRC3_FSL_SHIFT 11 /* ISRC3_FSL - [14:11] */ +#define ARIZONA_ISRC3_FSL_WIDTH 4 /* ISRC3_FSL - [14:11] */ + +/* + * R3832 (0xEF8) - ISRC 3 CTRL 3 + */ +#define ARIZONA_ISRC3_INT0_ENA 0x8000 /* ISRC3_INT0_ENA */ +#define ARIZONA_ISRC3_INT0_ENA_MASK 0x8000 /* ISRC3_INT0_ENA */ +#define ARIZONA_ISRC3_INT0_ENA_SHIFT 15 /* ISRC3_INT0_ENA */ +#define ARIZONA_ISRC3_INT0_ENA_WIDTH 1 /* ISRC3_INT0_ENA */ +#define ARIZONA_ISRC3_INT1_ENA 0x4000 /* ISRC3_INT1_ENA */ +#define ARIZONA_ISRC3_INT1_ENA_MASK 0x4000 /* ISRC3_INT1_ENA */ +#define ARIZONA_ISRC3_INT1_ENA_SHIFT 14 /* ISRC3_INT1_ENA */ +#define ARIZONA_ISRC3_INT1_ENA_WIDTH 1 /* ISRC3_INT1_ENA */ +#define ARIZONA_ISRC3_INT2_ENA 0x2000 /* ISRC3_INT2_ENA */ +#define ARIZONA_ISRC3_INT2_ENA_MASK 0x2000 /* ISRC3_INT2_ENA */ +#define ARIZONA_ISRC3_INT2_ENA_SHIFT 13 /* ISRC3_INT2_ENA */ +#define ARIZONA_ISRC3_INT2_ENA_WIDTH 1 /* ISRC3_INT2_ENA */ +#define ARIZONA_ISRC3_INT3_ENA 0x1000 /* ISRC3_INT3_ENA */ +#define ARIZONA_ISRC3_INT3_ENA_MASK 0x1000 /* ISRC3_INT3_ENA */ +#define ARIZONA_ISRC3_INT3_ENA_SHIFT 12 /* ISRC3_INT3_ENA */ +#define ARIZONA_ISRC3_INT3_ENA_WIDTH 1 /* ISRC3_INT3_ENA */ +#define ARIZONA_ISRC3_DEC0_ENA 0x0200 /* ISRC3_DEC0_ENA */ +#define ARIZONA_ISRC3_DEC0_ENA_MASK 0x0200 /* ISRC3_DEC0_ENA */ +#define ARIZONA_ISRC3_DEC0_ENA_SHIFT 9 /* ISRC3_DEC0_ENA */ +#define ARIZONA_ISRC3_DEC0_ENA_WIDTH 1 /* ISRC3_DEC0_ENA */ +#define ARIZONA_ISRC3_DEC1_ENA 0x0100 /* ISRC3_DEC1_ENA */ +#define ARIZONA_ISRC3_DEC1_ENA_MASK 0x0100 /* ISRC3_DEC1_ENA */ +#define ARIZONA_ISRC3_DEC1_ENA_SHIFT 8 /* ISRC3_DEC1_ENA */ +#define ARIZONA_ISRC3_DEC1_ENA_WIDTH 1 /* ISRC3_DEC1_ENA */ +#define ARIZONA_ISRC3_DEC2_ENA 0x0080 /* ISRC3_DEC2_ENA */ +#define ARIZONA_ISRC3_DEC2_ENA_MASK 0x0080 /* ISRC3_DEC2_ENA */ +#define ARIZONA_ISRC3_DEC2_ENA_SHIFT 7 /* ISRC3_DEC2_ENA */ +#define ARIZONA_ISRC3_DEC2_ENA_WIDTH 1 /* ISRC3_DEC2_ENA */ +#define ARIZONA_ISRC3_DEC3_ENA 0x0040 /* ISRC3_DEC3_ENA */ +#define ARIZONA_ISRC3_DEC3_ENA_MASK 0x0040 /* ISRC3_DEC3_ENA */ +#define ARIZONA_ISRC3_DEC3_ENA_SHIFT 6 /* ISRC3_DEC3_ENA */ +#define ARIZONA_ISRC3_DEC3_ENA_WIDTH 1 /* ISRC3_DEC3_ENA */ +#define ARIZONA_ISRC3_NOTCH_ENA 0x0001 /* ISRC3_NOTCH_ENA */ +#define ARIZONA_ISRC3_NOTCH_ENA_MASK 0x0001 /* ISRC3_NOTCH_ENA */ +#define ARIZONA_ISRC3_NOTCH_ENA_SHIFT 0 /* ISRC3_NOTCH_ENA */ +#define ARIZONA_ISRC3_NOTCH_ENA_WIDTH 1 /* ISRC3_NOTCH_ENA */ + +/* + * R4352 (0x1100) - DSP1 Control 1 + */ +#define ARIZONA_DSP1_RATE_MASK 0x7800 /* DSP1_RATE - [14:11] */ +#define ARIZONA_DSP1_RATE_SHIFT 11 /* DSP1_RATE - [14:11] */ +#define ARIZONA_DSP1_RATE_WIDTH 4 /* DSP1_RATE - [14:11] */ +#define ARIZONA_DSP1_MEM_ENA 0x0010 /* DSP1_MEM_ENA */ +#define ARIZONA_DSP1_MEM_ENA_MASK 0x0010 /* DSP1_MEM_ENA */ +#define ARIZONA_DSP1_MEM_ENA_SHIFT 4 /* DSP1_MEM_ENA */ +#define ARIZONA_DSP1_MEM_ENA_WIDTH 1 /* DSP1_MEM_ENA */ +#define ARIZONA_DSP1_SYS_ENA 0x0004 /* DSP1_SYS_ENA */ +#define ARIZONA_DSP1_SYS_ENA_MASK 0x0004 /* DSP1_SYS_ENA */ +#define ARIZONA_DSP1_SYS_ENA_SHIFT 2 /* DSP1_SYS_ENA */ +#define ARIZONA_DSP1_SYS_ENA_WIDTH 1 /* DSP1_SYS_ENA */ +#define ARIZONA_DSP1_CORE_ENA 0x0002 /* DSP1_CORE_ENA */ +#define ARIZONA_DSP1_CORE_ENA_MASK 0x0002 /* DSP1_CORE_ENA */ +#define ARIZONA_DSP1_CORE_ENA_SHIFT 1 /* DSP1_CORE_ENA */ +#define ARIZONA_DSP1_CORE_ENA_WIDTH 1 /* DSP1_CORE_ENA */ +#define ARIZONA_DSP1_START 0x0001 /* DSP1_START */ +#define ARIZONA_DSP1_START_MASK 0x0001 /* DSP1_START */ +#define ARIZONA_DSP1_START_SHIFT 0 /* DSP1_START */ +#define ARIZONA_DSP1_START_WIDTH 1 /* DSP1_START */ + +/* + * R4353 (0x1101) - DSP1 Clocking 1 + */ +#define ARIZONA_DSP1_CLK_SEL_MASK 0x0007 /* DSP1_CLK_SEL - [2:0] */ +#define ARIZONA_DSP1_CLK_SEL_SHIFT 0 /* DSP1_CLK_SEL - [2:0] */ +#define ARIZONA_DSP1_CLK_SEL_WIDTH 3 /* DSP1_CLK_SEL - [2:0] */ + +/* + * R4356 (0x1104) - DSP1 Status 1 + */ +#define ARIZONA_DSP1_RAM_RDY 0x0001 /* DSP1_RAM_RDY */ +#define ARIZONA_DSP1_RAM_RDY_MASK 0x0001 /* DSP1_RAM_RDY */ +#define ARIZONA_DSP1_RAM_RDY_SHIFT 0 /* DSP1_RAM_RDY */ +#define ARIZONA_DSP1_RAM_RDY_WIDTH 1 /* DSP1_RAM_RDY */ + +/* + * R4357 (0x1105) - DSP1 Status 2 + */ +#define ARIZONA_DSP1_PING_FULL 0x8000 /* DSP1_PING_FULL */ +#define ARIZONA_DSP1_PING_FULL_MASK 0x8000 /* DSP1_PING_FULL */ +#define ARIZONA_DSP1_PING_FULL_SHIFT 15 /* DSP1_PING_FULL */ +#define ARIZONA_DSP1_PING_FULL_WIDTH 1 /* DSP1_PING_FULL */ +#define ARIZONA_DSP1_PONG_FULL 0x4000 /* DSP1_PONG_FULL */ +#define ARIZONA_DSP1_PONG_FULL_MASK 0x4000 /* DSP1_PONG_FULL */ +#define ARIZONA_DSP1_PONG_FULL_SHIFT 14 /* DSP1_PONG_FULL */ +#define ARIZONA_DSP1_PONG_FULL_WIDTH 1 /* DSP1_PONG_FULL */ +#define ARIZONA_DSP1_WDMA_ACTIVE_CHANNELS_MASK 0x00FF /* DSP1_WDMA_ACTIVE_CHANNELS - [7:0] */ +#define ARIZONA_DSP1_WDMA_ACTIVE_CHANNELS_SHIFT 0 /* DSP1_WDMA_ACTIVE_CHANNELS - [7:0] */ +#define ARIZONA_DSP1_WDMA_ACTIVE_CHANNELS_WIDTH 8 /* DSP1_WDMA_ACTIVE_CHANNELS - [7:0] */ + +#endif -- cgit v1.2.3 From 3cc72986947501a6a8fd12330e0963b59ed2f964 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 19 Jun 2012 16:31:53 +0100 Subject: mfd: arizona: Core driver Several forthcoming Wolfson devices are based on a common platform known as Arizona allowing a great deal of reuse of driver code. This patch adds core support for these devices. In order to handle systems which do not use the generic clock API a simple wrapper for the 32kHz clock domain in the devices is provided. Once the generic clock API is widely available this code will be moved over to use that. For simplicity some WM5102 specific code is included in the core driver, the effort involved in splitting the device out isn't worth it. Signed-off-by: Mark Brown --- include/linux/mfd/arizona/core.h | 102 ++++++++++++++++++++++++++++++++ include/linux/mfd/arizona/pdata.h | 119 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 221 insertions(+) create mode 100644 include/linux/mfd/arizona/core.h create mode 100644 include/linux/mfd/arizona/pdata.h (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h new file mode 100644 index 000000000000..0157d845c2ff --- /dev/null +++ b/include/linux/mfd/arizona/core.h @@ -0,0 +1,102 @@ +/* + * Arizona MFD internals + * + * Copyright 2012 Wolfson Microelectronics plc + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM_ARIZONA_CORE_H +#define _WM_ARIZONA_CORE_H + +#include +#include +#include +#include + +#define ARIZONA_MAX_CORE_SUPPLIES 3 + +enum arizona_type { + WM5102 = 1, +}; + +#define ARIZONA_IRQ_GP1 0 +#define ARIZONA_IRQ_GP2 1 +#define ARIZONA_IRQ_GP3 2 +#define ARIZONA_IRQ_GP4 3 +#define ARIZONA_IRQ_GP5_FALL 4 +#define ARIZONA_IRQ_GP5_RISE 5 +#define ARIZONA_IRQ_JD_FALL 6 +#define ARIZONA_IRQ_JD_RISE 7 +#define ARIZONA_IRQ_DSP1_RAM_RDY 8 +#define ARIZONA_IRQ_DSP_IRQ1 9 +#define ARIZONA_IRQ_DSP_IRQ2 10 +#define ARIZONA_IRQ_SPK_SHUTDOWN_WARN 11 +#define ARIZONA_IRQ_SPK_SHUTDOWN 12 +#define ARIZONA_IRQ_MICDET 13 +#define ARIZONA_IRQ_HPDET 14 +#define ARIZONA_IRQ_WSEQ_DONE 15 +#define ARIZONA_IRQ_DRC2_SIG_DET 16 +#define ARIZONA_IRQ_DRC1_SIG_DET 17 +#define ARIZONA_IRQ_ASRC2_LOCK 18 +#define ARIZONA_IRQ_ASRC1_LOCK 19 +#define ARIZONA_IRQ_UNDERCLOCKED 20 +#define ARIZONA_IRQ_OVERCLOCKED 21 +#define ARIZONA_IRQ_FLL2_LOCK 22 +#define ARIZONA_IRQ_FLL1_LOCK 23 +#define ARIZONA_IRQ_CLKGEN_ERR 24 +#define ARIZONA_IRQ_CLKGEN_ERR_ASYNC 25 +#define ARIZONA_IRQ_ASRC_CFG_ERR 26 +#define ARIZONA_IRQ_AIF3_ERR 27 +#define ARIZONA_IRQ_AIF2_ERR 28 +#define ARIZONA_IRQ_AIF1_ERR 29 +#define ARIZONA_IRQ_CTRLIF_ERR 30 +#define ARIZONA_IRQ_MIXER_DROPPED_SAMPLES 31 +#define ARIZONA_IRQ_ASYNC_CLK_ENA_LOW 32 +#define ARIZONA_IRQ_SYSCLK_ENA_LOW 33 +#define ARIZONA_IRQ_ISRC1_CFG_ERR 34 +#define ARIZONA_IRQ_ISRC2_CFG_ERR 35 +#define ARIZONA_IRQ_BOOT_DONE 36 +#define ARIZONA_IRQ_DCS_DAC_DONE 37 +#define ARIZONA_IRQ_DCS_HP_DONE 38 +#define ARIZONA_IRQ_FLL2_CLOCK_OK 39 +#define ARIZONA_IRQ_FLL1_CLOCK_OK 40 + +#define ARIZONA_NUM_IRQ 41 + +struct arizona { + struct regmap *regmap; + struct device *dev; + + enum arizona_type type; + unsigned int rev; + + int num_core_supplies; + struct regulator_bulk_data core_supplies[ARIZONA_MAX_CORE_SUPPLIES]; + + struct arizona_pdata pdata; + + int irq; + struct irq_domain *virq; + struct regmap_irq_chip_data *aod_irq_chip; + struct regmap_irq_chip_data *irq_chip; + + struct mutex clk_lock; + int clk32k_ref; +}; + +int arizona_clk32k_enable(struct arizona *arizona); +int arizona_clk32k_disable(struct arizona *arizona); + +int arizona_request_irq(struct arizona *arizona, int irq, char *name, + irq_handler_t handler, void *data); +void arizona_free_irq(struct arizona *arizona, int irq, void *data); +int arizona_set_irq_wake(struct arizona *arizona, int irq, int on); + +int wm5102_patch(struct arizona *arizona); + +#endif diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h new file mode 100644 index 000000000000..fa2cb9885d62 --- /dev/null +++ b/include/linux/mfd/arizona/pdata.h @@ -0,0 +1,119 @@ +/* + * Platform data for Arizona devices + * + * Copyright 2012 Wolfson Microelectronics. PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ARIZONA_PDATA_H +#define _ARIZONA_PDATA_H + +#define ARIZONA_GPN_DIR 0x8000 /* GPN_DIR */ +#define ARIZONA_GPN_DIR_MASK 0x8000 /* GPN_DIR */ +#define ARIZONA_GPN_DIR_SHIFT 15 /* GPN_DIR */ +#define ARIZONA_GPN_DIR_WIDTH 1 /* GPN_DIR */ +#define ARIZONA_GPN_PU 0x4000 /* GPN_PU */ +#define ARIZONA_GPN_PU_MASK 0x4000 /* GPN_PU */ +#define ARIZONA_GPN_PU_SHIFT 14 /* GPN_PU */ +#define ARIZONA_GPN_PU_WIDTH 1 /* GPN_PU */ +#define ARIZONA_GPN_PD 0x2000 /* GPN_PD */ +#define ARIZONA_GPN_PD_MASK 0x2000 /* GPN_PD */ +#define ARIZONA_GPN_PD_SHIFT 13 /* GPN_PD */ +#define ARIZONA_GPN_PD_WIDTH 1 /* GPN_PD */ +#define ARIZONA_GPN_LVL 0x0800 /* GPN_LVL */ +#define ARIZONA_GPN_LVL_MASK 0x0800 /* GPN_LVL */ +#define ARIZONA_GPN_LVL_SHIFT 11 /* GPN_LVL */ +#define ARIZONA_GPN_LVL_WIDTH 1 /* GPN_LVL */ +#define ARIZONA_GPN_POL 0x0400 /* GPN_POL */ +#define ARIZONA_GPN_POL_MASK 0x0400 /* GPN_POL */ +#define ARIZONA_GPN_POL_SHIFT 10 /* GPN_POL */ +#define ARIZONA_GPN_POL_WIDTH 1 /* GPN_POL */ +#define ARIZONA_GPN_OP_CFG 0x0200 /* GPN_OP_CFG */ +#define ARIZONA_GPN_OP_CFG_MASK 0x0200 /* GPN_OP_CFG */ +#define ARIZONA_GPN_OP_CFG_SHIFT 9 /* GPN_OP_CFG */ +#define ARIZONA_GPN_OP_CFG_WIDTH 1 /* GPN_OP_CFG */ +#define ARIZONA_GPN_DB 0x0100 /* GPN_DB */ +#define ARIZONA_GPN_DB_MASK 0x0100 /* GPN_DB */ +#define ARIZONA_GPN_DB_SHIFT 8 /* GPN_DB */ +#define ARIZONA_GPN_DB_WIDTH 1 /* GPN_DB */ +#define ARIZONA_GPN_FN_MASK 0x007F /* GPN_FN - [6:0] */ +#define ARIZONA_GPN_FN_SHIFT 0 /* GPN_FN - [6:0] */ +#define ARIZONA_GPN_FN_WIDTH 7 /* GPN_FN - [6:0] */ + +#define ARIZONA_MAX_GPIO 5 + +#define ARIZONA_32KZ_MCLK1 1 +#define ARIZONA_32KZ_MCLK2 2 +#define ARIZONA_32KZ_NONE 3 + +#define ARIZONA_MAX_INPUT 3 + +#define ARIZONA_DMIC_MICVDD 0 +#define ARIZONA_DMIC_MICBIAS1 1 +#define ARIZONA_DMIC_MICBIAS2 2 +#define ARIZONA_DMIC_MICBIAS3 3 + +#define ARIZONA_INMODE_DIFF 0 +#define ARIZONA_INMODE_SE 1 +#define ARIZONA_INMODE_DMIC 2 + +#define ARIZONA_MAX_OUTPUT 5 + +#define ARIZONA_MAX_PDM_SPK 1 + +struct regulator_init_data; + +struct arizona_micd_config { + unsigned int src; + unsigned int bias; + bool gpio; +}; + +struct arizona_pdata { + int reset; /** GPIO controlling /RESET, if any */ + int ldoena; /** GPIO controlling LODENA, if any */ + + /** Regulator configuration for MICVDD */ + struct regulator_init_data *micvdd; + + /** Regulator configuration for LDO1 */ + struct regulator_init_data *ldo1; + + /** If a direct 32kHz clock is provided on an MCLK specify it here */ + int clk32k_src; + + bool irq_active_high; /** IRQ polarity */ + + /* Base GPIO */ + int gpio_base; + + /** Pin state for GPIO pins */ + int gpio_defaults[ARIZONA_MAX_GPIO]; + + /** GPIO for mic detection polarity */ + int micd_pol_gpio; + + /** Headset polarity configurations */ + struct arizona_micd_config *micd_configs; + int num_micd_configs; + + /** Reference voltage for DMIC inputs */ + int dmic_ref[ARIZONA_MAX_INPUT]; + + /** Mode of input structures */ + int inmode[ARIZONA_MAX_INPUT]; + + /** Mode for outputs */ + bool out_mono[ARIZONA_MAX_OUTPUT]; + + /** PDM speaker mute setting */ + unsigned int spk_mute[ARIZONA_MAX_PDM_SPK]; + + /** PDM speaker format */ + unsigned int spk_fmt[ARIZONA_MAX_PDM_SPK]; +}; + +#endif -- cgit v1.2.3 From 448bd857d48e69b33ef323739dc6d8ca20d4cda7 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Sat, 23 Jun 2012 10:23:51 +0800 Subject: PCI/PM: add PCIe runtime D3cold support This patch adds runtime D3cold support and corresponding ACPI platform support. This patch only enables runtime D3cold support; it does not enable D3cold support during system suspend/hibernate. D3cold is the deepest power saving state for a PCIe device, where its main power is removed. While it is in D3cold, you can't access the device at all, not even its configuration space (which is still accessible in D3hot). Therefore the PCI PM registers can not be used to transition into/out of the D3cold state; that must be done by platform logic such as ACPI _PR3. To support wakeup from D3cold, a system may provide auxiliary power, which allows a device to request wakeup using a Beacon or the sideband WAKE# signal. WAKE# is usually connected to platform logic such as ACPI GPE. This is quite different from other power saving states, where devices request wakeup via a PME message on the PCIe link. Some devices, such as those in plug-in slots, have no direct platform logic. For example, there is usually no ACPI _PR3 for them. D3cold support for these devices can be done via the PCIe Downstream Port leading to the device. When the PCIe port is powered on/off, the device is powered on/off too. Wakeup events from the device will be notified to the corresponding PCIe port. For more information about PCIe D3cold and corresponding ACPI support, please refer to: - PCI Express Base Specification Revision 2.0 - Advanced Configuration and Power Interface Specification Revision 5.0 [bhelgaas: changelog] Reviewed-by: Rafael J. Wysocki Originally-by: Zheng Yan Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..002cfd3e33ca 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -132,9 +132,10 @@ static inline const char *pci_power_name(pci_power_t state) return pci_power_names[1 + (int) state]; } -#define PCI_PM_D2_DELAY 200 -#define PCI_PM_D3_WAIT 10 -#define PCI_PM_BUS_WAIT 50 +#define PCI_PM_D2_DELAY 200 +#define PCI_PM_D3_WAIT 10 +#define PCI_PM_D3COLD_WAIT 100 +#define PCI_PM_BUS_WAIT 50 /** The pci_channel state describes connectivity between the CPU and * the pci device. If some PCI bus between here and the pci device @@ -278,11 +279,18 @@ struct pci_dev { unsigned int pme_poll:1; /* Poll device's PME status bit */ unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ - unsigned int no_d1d2:1; /* Only allow D0 and D3 */ + unsigned int no_d1d2:1; /* D1 and D2 are forbidden */ + unsigned int no_d3cold:1; /* D3cold is forbidden */ + unsigned int d3cold_allowed:1; /* D3cold is allowed by user */ unsigned int mmio_always_on:1; /* disallow turning off io/mem decoding during bar sizing */ unsigned int wakeup_prepared:1; + unsigned int runtime_d3cold:1; /* whether go through runtime + D3cold, not set for devices + powered on/off by the + corresponding bridge */ unsigned int d3_delay; /* D3->D0 transition time in ms */ + unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ -- cgit v1.2.3 From a91a5ac6858fbf7477131e1210cb3e897b668e6f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 4 Jun 2012 20:40:53 -0700 Subject: mempool: add @gfp_mask to mempool_create_node() mempool_create_node() currently assumes %GFP_KERNEL. Its only user, blk_init_free_list(), is about to be updated to use other allocation flags - add @gfp_mask argument to the function. Signed-off-by: Tejun Heo Cc: Andrew Morton Cc: Hugh Dickins Signed-off-by: Jens Axboe --- include/linux/mempool.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mempool.h b/include/linux/mempool.h index 7c08052e3321..39ed62ab5b8a 100644 --- a/include/linux/mempool.h +++ b/include/linux/mempool.h @@ -26,7 +26,8 @@ typedef struct mempool_s { extern mempool_t *mempool_create(int min_nr, mempool_alloc_t *alloc_fn, mempool_free_t *free_fn, void *pool_data); extern mempool_t *mempool_create_node(int min_nr, mempool_alloc_t *alloc_fn, - mempool_free_t *free_fn, void *pool_data, int nid); + mempool_free_t *free_fn, void *pool_data, + gfp_t gfp_mask, int nid); extern int mempool_resize(mempool_t *pool, int new_min_nr, gfp_t gfp_mask); extern void mempool_destroy(mempool_t *pool); -- cgit v1.2.3 From 86072d8112595ea1b6beeb33f578e7c2839e014e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 4 Jun 2012 20:40:54 -0700 Subject: block: drop custom queue draining used by scsi_transport_{iscsi|fc} iscsi_remove_host() uses bsg_remove_queue() which implements custom queue draining. fc_bsg_remove() open-codes mostly identical logic. The draining logic isn't correct in that blk_stop_queue() doesn't prevent new requests from being queued - it just stops processing, so nothing prevents new requests to be queued after the logic determines that the queue is drained. blk_cleanup_queue() now implements proper queue draining and these custom draining logics aren't necessary. Drop them and use bsg_unregister_queue() + blk_cleanup_queue() instead. Signed-off-by: Tejun Heo Reviewed-by: Mike Christie Acked-by: Vivek Goyal Cc: James Bottomley Cc: James Smart Signed-off-by: Jens Axboe --- include/linux/bsg-lib.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/bsg-lib.h b/include/linux/bsg-lib.h index f55ab8cdc106..4d0fb3df2f4a 100644 --- a/include/linux/bsg-lib.h +++ b/include/linux/bsg-lib.h @@ -67,7 +67,6 @@ void bsg_job_done(struct bsg_job *job, int result, int bsg_setup_queue(struct device *dev, struct request_queue *q, char *name, bsg_job_fn *job_fn, int dd_job_size); void bsg_request_fn(struct request_queue *q); -void bsg_remove_queue(struct request_queue *q); void bsg_goose_queue(struct request_queue *q); #endif -- cgit v1.2.3 From 8a5ecdd42862bf87ceab00bf2a15d7eabf58c02d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 4 Jun 2012 20:40:58 -0700 Subject: block: add q->nr_rqs[] and move q->rq.elvpriv to q->nr_rqs_elvpriv Add q->nr_rqs[] which currently behaves the same as q->rq.count[] and move q->rq.elvpriv to q->nr_rqs_elvpriv. blk_drain_queue() is updated to use q->nr_rqs[] instead of q->rq.count[]. These counters separates queue-wide request statistics from the request list and allow implementation of per-queue request allocation. While at it, properly indent fields of struct request_list. Signed-off-by: Tejun Heo Acked-by: Vivek Goyal Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 07954b05b86c..7e44ed93f84b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -51,11 +51,10 @@ struct request_list { * count[], starved[], and wait[] are indexed by * BLK_RW_SYNC/BLK_RW_ASYNC */ - int count[2]; - int starved[2]; - int elvpriv; - mempool_t *rq_pool; - wait_queue_head_t wait[2]; + int count[2]; + int starved[2]; + mempool_t *rq_pool; + wait_queue_head_t wait[2]; }; /* @@ -282,6 +281,8 @@ struct request_queue { struct list_head queue_head; struct request *last_merge; struct elevator_queue *elevator; + int nr_rqs[2]; /* # allocated [a]sync rqs */ + int nr_rqs_elvpriv; /* # allocated rqs w/ elvpriv */ /* * the queue request freelist, one for reads and one for writes -- cgit v1.2.3 From 5b788ce3e2acac9bf109743b1281d77347cf2101 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 4 Jun 2012 20:40:59 -0700 Subject: block: prepare for multiple request_lists Request allocation is about to be made per-blkg meaning that there'll be multiple request lists. * Make queue full state per request_list. blk_*queue_full() functions are renamed to blk_*rl_full() and takes @rl instead of @q. * Rename blk_init_free_list() to blk_init_rl() and make it take @rl instead of @q. Also add @gfp_mask parameter. * Add blk_exit_rl() instead of destroying rl directly from blk_release_queue(). * Add request_list->q and make request alloc/free functions - blk_free_request(), [__]freed_request(), __get_request() - take @rl instead of @q. This patch doesn't introduce any functional difference. Signed-off-by: Tejun Heo Acked-by: Vivek Goyal Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7e44ed93f84b..f2385ee7c7b2 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -46,7 +46,12 @@ struct blkcg_gq; struct request; typedef void (rq_end_io_fn)(struct request *, int); +#define BLK_RL_SYNCFULL (1U << 0) +#define BLK_RL_ASYNCFULL (1U << 1) + struct request_list { + struct request_queue *q; /* the queue this rl belongs to */ + /* * count[], starved[], and wait[] are indexed by * BLK_RW_SYNC/BLK_RW_ASYNC @@ -55,6 +60,7 @@ struct request_list { int starved[2]; mempool_t *rq_pool; wait_queue_head_t wait[2]; + unsigned int flags; }; /* @@ -562,27 +568,25 @@ static inline bool rq_is_sync(struct request *rq) return rw_is_sync(rq->cmd_flags); } -static inline int blk_queue_full(struct request_queue *q, int sync) +static inline bool blk_rl_full(struct request_list *rl, bool sync) { - if (sync) - return test_bit(QUEUE_FLAG_SYNCFULL, &q->queue_flags); - return test_bit(QUEUE_FLAG_ASYNCFULL, &q->queue_flags); + unsigned int flag = sync ? BLK_RL_SYNCFULL : BLK_RL_ASYNCFULL; + + return rl->flags & flag; } -static inline void blk_set_queue_full(struct request_queue *q, int sync) +static inline void blk_set_rl_full(struct request_list *rl, bool sync) { - if (sync) - queue_flag_set(QUEUE_FLAG_SYNCFULL, q); - else - queue_flag_set(QUEUE_FLAG_ASYNCFULL, q); + unsigned int flag = sync ? BLK_RL_SYNCFULL : BLK_RL_ASYNCFULL; + + rl->flags |= flag; } -static inline void blk_clear_queue_full(struct request_queue *q, int sync) +static inline void blk_clear_rl_full(struct request_list *rl, bool sync) { - if (sync) - queue_flag_clear(QUEUE_FLAG_SYNCFULL, q); - else - queue_flag_clear(QUEUE_FLAG_ASYNCFULL, q); + unsigned int flag = sync ? BLK_RL_SYNCFULL : BLK_RL_ASYNCFULL; + + rl->flags &= ~flag; } -- cgit v1.2.3 From 721002ec1dd55a52425455826af49cf8853b2d4f Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 22 Jun 2012 17:02:45 +0530 Subject: usb: otg: utils: rename function name in OTG utils _transceiver() in otg.c is replaced with _phy. usb_set_transceiver is replaced with usb_add_phy to make it similar to other usb standard function names like usb_add_hcd. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 38ab3f46346f..0e739c810525 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -121,7 +121,7 @@ struct usb_phy { /* for board-specific init logic */ -extern int usb_set_transceiver(struct usb_phy *); +extern int usb_add_phy(struct usb_phy *); #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ @@ -172,16 +172,16 @@ usb_phy_shutdown(struct usb_phy *x) /* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *usb_get_transceiver(void); -extern void usb_put_transceiver(struct usb_phy *); +extern struct usb_phy *usb_get_phy(void); +extern void usb_put_phy(struct usb_phy *); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *usb_get_transceiver(void) +static inline struct usb_phy *usb_get_phy(void) { return NULL; } -static inline void usb_put_transceiver(struct usb_phy *x) +static inline void usb_put_phy(struct usb_phy *x) { } -- cgit v1.2.3 From 662dca54ca67c92b7aa14b9a2ec54acacf33ce45 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 22 Jun 2012 17:02:46 +0530 Subject: usb: otg: support for multiple transceivers by a single controller Add a linked list for keeping multiple PHY instances with different types so that we can have separate USB2 and USB3 PHYs on one single board. _get_phy_ has been changed so that the controller gets the transceiver by type. _remove_phy_ has been added to let the phy be removed from the phy list. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 0e739c810525..1def65fb57d0 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -43,6 +43,13 @@ enum usb_phy_events { USB_EVENT_ENUMERATED, /* gadget driver enumerated */ }; +/* associate a type with PHY */ +enum usb_phy_type { + USB_PHY_TYPE_UNDEFINED, + USB_PHY_TYPE_USB2, + USB_PHY_TYPE_USB3, +}; + struct usb_phy; /* for transceivers connected thru an ULPI interface, the user must @@ -89,6 +96,7 @@ struct usb_phy { const char *label; unsigned int flags; + enum usb_phy_type type; enum usb_otg_state state; enum usb_phy_events last_event; @@ -105,6 +113,9 @@ struct usb_phy { u16 port_status; u16 port_change; + /* to support controllers that have multiple transceivers */ + struct list_head head; + /* initialize/shutdown the OTG controller */ int (*init)(struct usb_phy *x); void (*shutdown)(struct usb_phy *x); @@ -121,7 +132,8 @@ struct usb_phy { /* for board-specific init logic */ -extern int usb_add_phy(struct usb_phy *); +extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); +extern void usb_remove_phy(struct usb_phy *); #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ @@ -172,11 +184,11 @@ usb_phy_shutdown(struct usb_phy *x) /* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *usb_get_phy(void); +extern struct usb_phy *usb_get_phy(enum usb_phy_type type); extern void usb_put_phy(struct usb_phy *); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *usb_get_phy(void) +static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) { return NULL; } @@ -276,4 +288,15 @@ usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); +static inline const char *usb_phy_type_string(enum usb_phy_type type) +{ + switch (type) { + case USB_PHY_TYPE_USB2: + return "USB2 PHY"; + case USB_PHY_TYPE_USB3: + return "USB3 PHY"; + default: + return "UNKNOWN PHY TYPE"; + } +} #endif /* __LINUX_USB_OTG_H */ -- cgit v1.2.3 From 410219dcd2ba8d8b4bcfa9c232f35bf505bc021a Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 22 Jun 2012 17:02:47 +0530 Subject: usb: otg: utils: devres: Add API's to associate a device with the phy Used devres API's to associate the phy with a device so that on driver detach, release function is invoked on the devres data(usb_phy) and devres data(usb_phy) is released. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 1def65fb57d0..0cb2ec2e50c0 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -185,7 +185,10 @@ usb_phy_shutdown(struct usb_phy *x) /* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS extern struct usb_phy *usb_get_phy(enum usb_phy_type type); +extern struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type); extern void usb_put_phy(struct usb_phy *); +extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern const char *otg_state_string(enum usb_otg_state state); #else static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) @@ -193,10 +196,20 @@ static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) return NULL; } +static inline struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type) +{ + return NULL; +} + static inline void usb_put_phy(struct usb_phy *x) { } +static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) +{ +} + static inline const char *otg_state_string(enum usb_otg_state state) { return NULL; -- cgit v1.2.3 From c9721438c009adf8e81d376839ed037c53b9b8d9 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 22 Jun 2012 17:40:52 +0530 Subject: usb: musb: twl: use mailbox API to send VBUS or ID events The atomic notifier from twl4030/twl6030 to notifiy VBUS and ID events, is replaced by a direct call to omap musb blue. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- include/linux/usb/musb-omap.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 include/linux/usb/musb-omap.h (limited to 'include/linux') diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h new file mode 100644 index 000000000000..7774c5986f07 --- /dev/null +++ b/include/linux/usb/musb-omap.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2011-2012 by Texas Instruments + * + * The Inventra Controller Driver for Linux is free software; you + * can redistribute it and/or modify it under the terms of the GNU + * General Public License version 2 as published by the Free Software + * Foundation. + */ + +#ifndef __MUSB_OMAP_H__ +#define __MUSB_OMAP_H__ + +enum omap_musb_vbus_id_status { + OMAP_MUSB_UNKNOWN = 0, + OMAP_MUSB_ID_GROUND, + OMAP_MUSB_ID_FLOAT, + OMAP_MUSB_VBUS_VALID, + OMAP_MUSB_VBUS_OFF, +}; + +#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \ + defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)) +void omap_musb_mailbox(enum omap_musb_vbus_id_status status); +#else +static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status) +{ +} +#endif + +#endif /* __MUSB_OMAP_H__ */ -- cgit v1.2.3 From 74416e1e07660798379ce10a210bf4fd35b84f9f Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 30 May 2012 14:18:41 -0600 Subject: driver core: Add iommu_group tracking to struct device IOMMU groups allow IOMMU drivers to represent DMA visibility and isolation of devices. Multiple devices may be grouped together for the purposes of DMA. Placing a pointer on struct device enable easy access for things like streaming DMA programming and drivers like VFIO. Signed-off-by: Alex Williamson Acked-by: Greg Kroah-Hartman Acked-by: Benjamin Herrenschmidt Signed-off-by: Joerg Roedel --- include/linux/device.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 161d96241b1b..d0e4d99405ae 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -36,6 +36,7 @@ struct subsys_private; struct bus_type; struct device_node; struct iommu_ops; +struct iommu_group; struct bus_attribute { struct attribute attr; @@ -687,6 +688,7 @@ struct device { const struct attribute_group **groups; /* optional groups */ void (*release)(struct device *dev); + struct iommu_group *iommu_group; }; /* Get the wakeup routines, which depend on struct device */ -- cgit v1.2.3 From d72e31c9374627068df29da8085ca18c92ae35d3 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 30 May 2012 14:18:53 -0600 Subject: iommu: IOMMU Groups IOMMU device groups are currently a rather vague associative notion with assembly required by the user or user level driver provider to do anything useful. This patch intends to grow the IOMMU group concept into something a bit more consumable. To do this, we first create an object representing the group, struct iommu_group. This structure is allocated (iommu_group_alloc) and filled (iommu_group_add_device) by the iommu driver. The iommu driver is free to add devices to the group using it's own set of policies. This allows inclusion of devices based on physical hardware or topology limitations of the platform, as well as soft requirements, such as multi-function trust levels or peer-to-peer protection of the interconnects. Each device may only belong to a single iommu group, which is linked from struct device.iommu_group. IOMMU groups are maintained using kobject reference counting, allowing for automatic removal of empty, unreferenced groups. It is the responsibility of the iommu driver to remove devices from the group (iommu_group_remove_device). IOMMU groups also include a userspace representation in sysfs under /sys/kernel/iommu_groups. When allocated, each group is given a dynamically assign ID (int). The ID is managed by the core IOMMU group code to support multiple heterogeneous iommu drivers, which could potentially collide in group naming/numbering. This also keeps group IDs to small, easily managed values. A directory is created under /sys/kernel/iommu_groups for each group. A further subdirectory named "devices" contains links to each device within the group. The iommu_group file in the device's sysfs directory, which formerly contained a group number when read, is now a link to the iommu group. Example: $ ls -l /sys/kernel/iommu_groups/26/devices/ total 0 lrwxrwxrwx. 1 root root 0 Apr 17 12:57 0000:00:1e.0 -> ../../../../devices/pci0000:00/0000:00:1e.0 lrwxrwxrwx. 1 root root 0 Apr 17 12:57 0000:06:0d.0 -> ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.0 lrwxrwxrwx. 1 root root 0 Apr 17 12:57 0000:06:0d.1 -> ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.1 $ ls -l /sys/kernel/iommu_groups/26/devices/*/iommu_group [truncating perms/owner/timestamp] /sys/kernel/iommu_groups/26/devices/0000:00:1e.0/iommu_group -> ../../../kernel/iommu_groups/26 /sys/kernel/iommu_groups/26/devices/0000:06:0d.0/iommu_group -> ../../../../kernel/iommu_groups/26 /sys/kernel/iommu_groups/26/devices/0000:06:0d.1/iommu_group -> ../../../../kernel/iommu_groups/26 Groups also include several exported functions for use by user level driver providers, for example VFIO. These include: iommu_group_get(): Acquires a reference to a group from a device iommu_group_put(): Releases reference iommu_group_for_each_dev(): Iterates over group devices using callback iommu_group_[un]register_notifier(): Allows notification of device add and remove operations relevant to the group iommu_group_id(): Return the group number This patch also extends the IOMMU API to allow attaching groups to domains. This is currently a simple wrapper for iterating through devices within a group, but it's expected that the IOMMU API may eventually make groups a more integral part of domains. Groups intentionally do not try to manage group ownership. A user level driver provider must independently acquire ownership for each device within a group before making use of the group as a whole. This may change in the future if group usage becomes more pervasive across both DMA and IOMMU ops. Groups intentionally do not provide a mechanism for driver locking or otherwise manipulating driver matching/probing of devices within the group. Such interfaces are generic to devices and beyond the scope of IOMMU groups. If implemented, user level providers have ready access via iommu_group_for_each_dev and group notifiers. iommu_device_group() is removed here as it has no users. The replacement is: group = iommu_group_get(dev); id = iommu_group_id(group); iommu_group_put(group); AMD-Vi & Intel VT-d support re-added in following patches. Signed-off-by: Alex Williamson Acked-by: Benjamin Herrenschmidt Signed-off-by: Joerg Roedel --- include/linux/iommu.h | 104 ++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 101 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 450293f6d68b..a71df92be992 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -26,6 +26,7 @@ #define IOMMU_CACHE (4) /* DMA cache coherency */ struct iommu_ops; +struct iommu_group; struct bus_type; struct device; struct iommu_domain; @@ -60,6 +61,8 @@ struct iommu_domain { * @iova_to_phys: translate iova to physical address * @domain_has_cap: domain capabilities query * @commit: commit iommu domain + * @add_device: add device to iommu grouping + * @remove_device: remove device from iommu grouping * @pgsize_bitmap: bitmap of supported page sizes */ struct iommu_ops { @@ -75,10 +78,18 @@ struct iommu_ops { unsigned long iova); int (*domain_has_cap)(struct iommu_domain *domain, unsigned long cap); - int (*device_group)(struct device *dev, unsigned int *groupid); + int (*add_device)(struct device *dev); + void (*remove_device)(struct device *dev); unsigned long pgsize_bitmap; }; +#define IOMMU_GROUP_NOTIFY_ADD_DEVICE 1 /* Device added */ +#define IOMMU_GROUP_NOTIFY_DEL_DEVICE 2 /* Pre Device removed */ +#define IOMMU_GROUP_NOTIFY_BIND_DRIVER 3 /* Pre Driver bind */ +#define IOMMU_GROUP_NOTIFY_BOUND_DRIVER 4 /* Post Driver bind */ +#define IOMMU_GROUP_NOTIFY_UNBIND_DRIVER 5 /* Pre Driver unbind */ +#define IOMMU_GROUP_NOTIFY_UNBOUND_DRIVER 6 /* Post Driver unbind */ + extern int bus_set_iommu(struct bus_type *bus, struct iommu_ops *ops); extern bool iommu_present(struct bus_type *bus); extern struct iommu_domain *iommu_domain_alloc(struct bus_type *bus); @@ -97,7 +108,29 @@ extern int iommu_domain_has_cap(struct iommu_domain *domain, unsigned long cap); extern void iommu_set_fault_handler(struct iommu_domain *domain, iommu_fault_handler_t handler, void *token); -extern int iommu_device_group(struct device *dev, unsigned int *groupid); + +extern int iommu_attach_group(struct iommu_domain *domain, + struct iommu_group *group); +extern void iommu_detach_group(struct iommu_domain *domain, + struct iommu_group *group); +extern struct iommu_group *iommu_group_alloc(void); +extern void *iommu_group_get_iommudata(struct iommu_group *group); +extern void iommu_group_set_iommudata(struct iommu_group *group, + void *iommu_data, + void (*release)(void *iommu_data)); +extern int iommu_group_set_name(struct iommu_group *group, const char *name); +extern int iommu_group_add_device(struct iommu_group *group, + struct device *dev); +extern void iommu_group_remove_device(struct device *dev); +extern int iommu_group_for_each_dev(struct iommu_group *group, void *data, + int (*fn)(struct device *, void *)); +extern struct iommu_group *iommu_group_get(struct device *dev); +extern void iommu_group_put(struct iommu_group *group); +extern int iommu_group_register_notifier(struct iommu_group *group, + struct notifier_block *nb); +extern int iommu_group_unregister_notifier(struct iommu_group *group, + struct notifier_block *nb); +extern int iommu_group_id(struct iommu_group *group); /** * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework @@ -142,6 +175,7 @@ static inline int report_iommu_fault(struct iommu_domain *domain, #else /* CONFIG_IOMMU_API */ struct iommu_ops {}; +struct iommu_group {}; static inline bool iommu_present(struct bus_type *bus) { @@ -197,11 +231,75 @@ static inline void iommu_set_fault_handler(struct iommu_domain *domain, { } -static inline int iommu_device_group(struct device *dev, unsigned int *groupid) +int iommu_attach_group(struct iommu_domain *domain, struct iommu_group *group) +{ + return -ENODEV; +} + +void iommu_detach_group(struct iommu_domain *domain, struct iommu_group *group) +{ +} + +struct iommu_group *iommu_group_alloc(void) +{ + return ERR_PTR(-ENODEV); +} + +void *iommu_group_get_iommudata(struct iommu_group *group) +{ + return NULL; +} + +void iommu_group_set_iommudata(struct iommu_group *group, void *iommu_data, + void (*release)(void *iommu_data)) +{ +} + +int iommu_group_set_name(struct iommu_group *group, const char *name) +{ + return -ENODEV; +} + +int iommu_group_add_device(struct iommu_group *group, struct device *dev) +{ + return -ENODEV; +} + +void iommu_group_remove_device(struct device *dev) +{ +} + +int iommu_group_for_each_dev(struct iommu_group *group, void *data, + int (*fn)(struct device *, void *)) +{ + return -ENODEV; +} + +struct iommu_group *iommu_group_get(struct device *dev) +{ + return NULL; +} + +void iommu_group_put(struct iommu_group *group) +{ +} + +int iommu_group_register_notifier(struct iommu_group *group, + struct notifier_block *nb) { return -ENODEV; } +int iommu_group_unregister_notifier(struct iommu_group *group, + struct notifier_block *nb) +{ + return 0; +} + +int iommu_group_id(struct iommu_group *group) +{ + return -ENODEV; +} #endif /* CONFIG_IOMMU_API */ #endif /* __LINUX_IOMMU_H */ -- cgit v1.2.3 From 4e0ee78f2af96676c9dca898c13250f62c513058 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Mon, 25 Jun 2012 14:23:54 +0300 Subject: iommu: Add DMA window parser, of_get_dma_window() This code was based on: "arch/microblaze/kernel/prom_parse.c" "arch/powerpc/kernel/prom_parse.c" Can replace "of_parse_dma_window()" in the above. This supports different formats flexibly. "prefix" can be configured if any. "busno" and "index" are optionally specified. Set NULL and 0 if not used. Signed-off-by: Hiroshi DOYU Acked-by: Stephen Warren Signed-off-by: Joerg Roedel --- include/linux/of_iommu.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 include/linux/of_iommu.h (limited to 'include/linux') diff --git a/include/linux/of_iommu.h b/include/linux/of_iommu.h new file mode 100644 index 000000000000..51a560f34bca --- /dev/null +++ b/include/linux/of_iommu.h @@ -0,0 +1,21 @@ +#ifndef __OF_IOMMU_H +#define __OF_IOMMU_H + +#ifdef CONFIG_OF_IOMMU + +extern int of_get_dma_window(struct device_node *dn, const char *prefix, + int index, unsigned long *busno, dma_addr_t *addr, + size_t *size); + +#else + +static inline int of_get_dma_window(struct device_node *dn, const char *prefix, + int index, unsigned long *busno, dma_addr_t *addr, + size_t *size) +{ + return -EINVAL; +} + +#endif /* CONFIG_OF_IOMMU */ + +#endif /* __OF_IOMMU_H */ -- cgit v1.2.3 From 023b515e5b304122f3802abaa68d1da46fdf48b8 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 19 Jun 2012 09:54:54 +0200 Subject: uas: task mgmt & error handling Add task management support, wind up in abort and device reset error handlers. Cancel all in-flight urbs in bus reset handler. Signed-off-by: Gerd Hoffmann Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/uas.h | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h index 9a988e413694..5499ab5c94bd 100644 --- a/include/linux/usb/uas.h +++ b/include/linux/usb/uas.h @@ -20,6 +20,28 @@ enum { IU_ID_WRITE_READY = 0x07, }; +enum { + TMF_ABORT_TASK = 0x01, + TMF_ABORT_TASK_SET = 0x02, + TMF_CLEAR_TASK_SET = 0x04, + TMF_LOGICAL_UNIT_RESET = 0x08, + TMF_I_T_NEXUS_RESET = 0x10, + TMF_CLEAR_ACA = 0x40, + TMF_QUERY_TASK = 0x80, + TMF_QUERY_TASK_SET = 0x81, + TMF_QUERY_ASYNC_EVENT = 0x82, +}; + +enum { + RC_TMF_COMPLETE = 0x00, + RC_INVALID_INFO_UNIT = 0x02, + RC_TMF_NOT_SUPPORTED = 0x04, + RC_TMF_FAILED = 0x05, + RC_TMF_SUCCEEDED = 0x08, + RC_INCORRECT_LUN = 0x09, + RC_OVERLAPPED_TAG = 0x0a, +}; + struct command_iu { __u8 iu_id; __u8 rsvd1; @@ -32,6 +54,16 @@ struct command_iu { __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */ }; +struct task_mgmt_iu { + __u8 iu_id; + __u8 rsvd1; + __be16 tag; + __u8 function; + __u8 rsvd2; + __be16 task_tag; + struct scsi_lun lun; +}; + /* * Also used for the Read Ready and Write Ready IUs since they have the * same first four bytes @@ -47,6 +79,14 @@ struct sense_iu { __u8 sense[SCSI_SENSE_BUFFERSIZE]; }; +struct response_ui { + __u8 iu_id; + __u8 rsvd1; + __be16 tag; + __be16 add_response_info; + __u8 response_code; +}; + struct usb_pipe_usage_descriptor { __u8 bLength; __u8 bDescriptorType; -- cgit v1.2.3 From 88e920b4505105b710f8d4a535ec02c4078f8e2e Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 21 Jun 2012 11:09:54 -0700 Subject: nl80211: specify RSSI threshold in scheduled scan Support configuring an RSSI threshold in dBm (s32) when requesting scheduled scan, below which a BSS won't be reported by the cfg80211 driver. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index b7c3b737ddde..c0fc5d277338 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1542,6 +1542,9 @@ enum nl80211_attrs { #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 +/* default RSSI threshold for scan results if none specified. */ +#define NL80211_SCAN_RSSI_THOLD_OFF -300 + /** * enum nl80211_iftype - (virtual) interface types * @@ -1974,6 +1977,8 @@ enum nl80211_reg_rule_attr { * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -1982,6 +1987,7 @@ enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, NL80211_SCHED_SCAN_MATCH_ATTR_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, -- cgit v1.2.3 From 2b6f2c3520124e8bad4bffa71f5b98e602b9cf03 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Mon, 25 Jun 2012 21:30:57 -0600 Subject: PCI: pull pcibios_setup() up into core Currently, all of the architectures implement their own pcibios_setup() routine. Most of the implementations do nothing so this patch introduces a generic (__weak) routine in the core that can be used by all architectures as a default. If necessary, it can be overridden by architecture-specific code. Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..f91143e86f85 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -642,6 +642,7 @@ extern int no_pci_devices(void); void pcibios_fixup_bus(struct pci_bus *); int __must_check pcibios_enable_device(struct pci_dev *, int mask); +/* Architecture specific versions may override this (weak) */ char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ -- cgit v1.2.3 From a051661ca6d134c18599498b185b667859d4339b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 26 Jun 2012 15:05:44 -0700 Subject: blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer . v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo Acked-by: Vivek Goyal Cc: Wu Fengguang Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index f2385ee7c7b2..3816ce8a08fc 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -51,7 +51,9 @@ typedef void (rq_end_io_fn)(struct request *, int); struct request_list { struct request_queue *q; /* the queue this rl belongs to */ - +#ifdef CONFIG_BLK_CGROUP + struct blkcg_gq *blkg; /* blkg this request pool belongs to */ +#endif /* * count[], starved[], and wait[] are indexed by * BLK_RW_SYNC/BLK_RW_ASYNC @@ -143,6 +145,7 @@ struct request { struct hd_struct *part; unsigned long start_time; #ifdef CONFIG_BLK_CGROUP + struct request_list *rl; /* rl this rq is alloced from */ unsigned long long start_time_ns; unsigned long long io_start_time_ns; /* when passed to hardware */ #endif @@ -291,9 +294,12 @@ struct request_queue { int nr_rqs_elvpriv; /* # allocated rqs w/ elvpriv */ /* - * the queue request freelist, one for reads and one for writes + * If blkcg is not used, @q->root_rl serves all requests. If blkcg + * is used, root blkg allocates from @q->root_rl and all other + * blkgs from their own blkg->rl. Which one to use should be + * determined using bio_request_list(). */ - struct request_list rq; + struct request_list root_rl; request_fn_proc *request_fn; make_request_fn *make_request_fn; -- cgit v1.2.3 From a46af4ebf9ffec35eea0390e89935197b833dc61 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 25 Jun 2012 12:19:03 -0400 Subject: USB: EHCI: define extension registers like normal ones This patch (as1562) cleans up the definitions of the EHCI extended registers to be consistent with the definitions of the standard registers. This makes the code look a lot nicer, with no functional change. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_def.h | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 7cc95ee3606b..de4b9ed5d5dd 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -111,7 +111,13 @@ struct ehci_regs { /* ASYNCLISTADDR: offset 0x18 */ u32 async_next; /* address of next async queue head */ - u32 reserved[9]; + u32 reserved1[2]; + + /* TXFILLTUNING: offset 0x24 */ + u32 txfill_tuning; /* TX FIFO Tuning register */ +#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ + + u32 reserved2[6]; /* CONFIGFLAG: offset 0x40 */ u32 configured_flag; @@ -155,26 +161,34 @@ struct ehci_regs { #define PORT_CSC (1<<1) /* connect status change */ #define PORT_CONNECT (1<<0) /* device connected */ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -}; -#define USBMODE 0x68 /* USB Device mode */ + u32 reserved3[9]; + + /* USBMODE: offset 0x68 */ + u32 usbmode; /* USB Device mode */ #define USBMODE_SDIS (1<<3) /* Stream disable */ #define USBMODE_BE (1<<2) /* BE/LE endianness select */ #define USBMODE_CM_HC (3<<0) /* host controller mode */ #define USBMODE_CM_IDLE (0<<0) /* idle state */ + u32 reserved4[7]; + /* Moorestown has some non-standard registers, partially due to the fact that * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ -#define HOSTPC0 0x84 /* HOSTPC extension */ + /* HOSTPC: offset 0x84 */ + u32 hostpc[0]; /* HOSTPC extension */ #define HOSTPC_PHCD (1<<22) /* Phy clock disable */ #define HOSTPC_PSPD (3<<25) /* Port speed detection */ -#define USBMODE_EX 0xc8 /* USB Device mode extension */ + + u32 reserved5[17]; + + /* USBMODE_EX: offset 0xc8 */ + u32 usbmode_ex; /* USB Device mode extension */ #define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ #define USBMODE_EX_HC (3<<0) /* host controller mode */ -#define TXFILLTUNING 0x24 /* TX FIFO Tuning register */ -#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ +}; /* Appendix C, Debug port ... intended for use with special "debug devices" * that can help if there's no serial console. (nonstandard enumeration.) -- cgit v1.2.3 From 32bad7e30f113a8a5cebe4704bf6519ab4383e1b Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Mon, 25 Jun 2012 23:24:48 +0000 Subject: mac802154: add wpan device-class support Every real 802.15.4 transceiver, which works with software MAC layer, can be classified as a wpan device in this stack. So the wpan device implementation provides missing link in datapath between the device drivers and the Linux network queue. According to the IEEE 802.15.4 standard each packet can be one of the following types: - beacon - MAC layer command - ACK - data This patch adds support for the data packet-type only, but this is enough to perform data transmission and receiving over radio. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- include/linux/nl802154.h | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h index 5a3db3aa5f17..fd4f2d1cdf6c 100644 --- a/include/linux/nl802154.h +++ b/include/linux/nl802154.h @@ -130,18 +130,8 @@ enum { enum { __IEEE802154_DEV_INVALID = -1, - /* TODO: - * Nowadays three device types supported by this stack at linux-zigbee - * project: WPAN = 0, MONITOR = 1 and SMAC = 2. - * - * Since this stack implementation exists many years, it's definitely - * bad idea to change the assigned values due to they are already used - * by third-party userspace software like: iz-tools, wireshark... - * - * Currently only monitor device is added and initialized by '1' for - * compatibility. - */ - IEEE802154_DEV_MONITOR = 1, + IEEE802154_DEV_WPAN, + IEEE802154_DEV_MONITOR, __IEEE802154_DEV_MAX, }; -- cgit v1.2.3 From 7b8e19b67c1b171a04f6bd2f973d0b38cb496bf6 Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Mon, 25 Jun 2012 23:24:53 +0000 Subject: drivers/ieee802154: add support for the at86rf230/231 transceivers The AT86RF231 is a feature rich, low-power 2.4 GHz radio transceiver designed for industrial and consumer ZigBee/IEEE 802.15.4, 6LoWPAN, RF4CE and high data rate 2.4 GHz ISM band applications. This patch adds support for the Atmel RF230/231 radio transceivers. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- include/linux/spi/at86rf230.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 include/linux/spi/at86rf230.h (limited to 'include/linux') diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h new file mode 100644 index 000000000000..b2b1afbb3202 --- /dev/null +++ b/include/linux/spi/at86rf230.h @@ -0,0 +1,31 @@ +/* + * AT86RF230/RF231 driver + * + * Copyright (C) 2009-2012 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Dmitry Eremin-Solenikov + */ +#ifndef AT86RF230_H +#define AT86RF230_H + +struct at86rf230_platform_data { + int rstn; + int slp_tr; + int dig2; +}; + +#endif -- cgit v1.2.3 From 52a4fd77808662a16cd17ad3b0e1ad75e0162d8b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 26 Jun 2012 06:52:46 +0000 Subject: team: do not allow to map disabled ports Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index c1938869191f..e636a54e7a71 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -64,6 +64,8 @@ struct team_port { long mode_priv[0]; }; +extern bool team_port_enabled(struct team_port *port); + struct team_mode_ops { int (*init)(struct team *team); void (*exit)(struct team *team); -- cgit v1.2.3 From 4a9fbcc6d606ae7f6a4e65b8a2759f46be8d45c6 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 26 Jun 2012 06:52:47 +0000 Subject: team: remove unused rcu_head field from team_port struct Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index e636a54e7a71..99efd60fa8c9 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -60,7 +60,6 @@ struct team_port { unsigned int mtu; } orig; - struct rcu_head rcu; long mode_priv[0]; }; -- cgit v1.2.3 From c3deafc5261a9421b315ee0d0e8e36ba7857128c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 Jun 2012 21:51:35 -0700 Subject: netlink: Delete NLMSG_PUT and NLMSG_NEW. No longer used and a poor interface as they were macros with embedded gotos. Signed-off-by: David S. Miller --- include/linux/netlink.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 0f628ffa420c..ed33f0901bc2 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -241,14 +241,6 @@ struct netlink_notify { struct nlmsghdr * __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags); -#define NLMSG_NEW(skb, pid, seq, type, len, flags) \ -({ if (unlikely(skb_tailroom(skb) < (int)NLMSG_SPACE(len))) \ - goto nlmsg_failure; \ - __nlmsg_put(skb, pid, seq, type, len, flags); }) - -#define NLMSG_PUT(skb, pid, seq, type, len) \ - NLMSG_NEW(skb, pid, seq, type, len, 0) - struct netlink_dump_control { int (*dump)(struct sk_buff *skb, struct netlink_callback *); int (*done)(struct netlink_callback*); -- cgit v1.2.3 From 38ced28b21efff18fd5e5c98a92830e8f0031cee Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 12 Jun 2012 10:55:57 -0300 Subject: edac: allow specifying the error count with fake_inject In order to test if the error counters are properly incremented, add a way to specify how many errors were generated by a trace. Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index 6677af853e30..bab9f8473dc1 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -665,6 +665,7 @@ struct mem_ctl_info { struct dentry *debugfs; u8 fake_inject_layer[EDAC_MAX_LAYERS]; u32 fake_inject_ue; + u16 fake_inject_count; #endif }; -- cgit v1.2.3 From 392025f87a5105c640cf1b4b317c21c14c05a6f9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 26 Jun 2012 20:27:09 +0200 Subject: netfilter: ctnetlink: add new messages to obtain statistics This patch adds the following messages to ctnetlink: IPCTNL_MSG_CT_GET_STATS_CPU IPCTNL_MSG_CT_GET_STATS IPCTNL_MSG_EXP_GET_STATS_CPU To display connection tracking system per-cpu and global statistics. This provides a replacement for the following /proc interfaces: /proc/net/stat/nf_conntrack /proc/sys/net/netfilter/nf_conntrack_count Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nfnetlink_conntrack.h | 38 +++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 768883370080..f649f7423ca2 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -7,6 +7,8 @@ enum cntl_msg_types { IPCTNL_MSG_CT_GET, IPCTNL_MSG_CT_DELETE, IPCTNL_MSG_CT_GET_CTRZERO, + IPCTNL_MSG_CT_GET_STATS_CPU, + IPCTNL_MSG_CT_GET_STATS, IPCTNL_MSG_MAX }; @@ -15,6 +17,7 @@ enum ctnl_exp_msg_types { IPCTNL_MSG_EXP_NEW, IPCTNL_MSG_EXP_GET, IPCTNL_MSG_EXP_DELETE, + IPCTNL_MSG_EXP_GET_STATS_CPU, IPCTNL_MSG_EXP_MAX }; @@ -203,4 +206,39 @@ enum ctattr_secctx { }; #define CTA_SECCTX_MAX (__CTA_SECCTX_MAX - 1) +enum ctattr_stats_cpu { + CTA_STATS_UNSPEC, + CTA_STATS_SEARCHED, + CTA_STATS_FOUND, + CTA_STATS_NEW, + CTA_STATS_INVALID, + CTA_STATS_IGNORE, + CTA_STATS_DELETE, + CTA_STATS_DELETE_LIST, + CTA_STATS_INSERT, + CTA_STATS_INSERT_FAILED, + CTA_STATS_DROP, + CTA_STATS_EARLY_DROP, + CTA_STATS_ERROR, + CTA_STATS_SEARCH_RESTART, + __CTA_STATS_MAX, +}; +#define CTA_STATS_MAX (__CTA_STATS_MAX - 1) + +enum ctattr_stats_global { + CTA_STATS_GLOBAL_UNSPEC, + CTA_STATS_GLOBAL_ENTRIES, + __CTA_STATS_GLOBAL_MAX, +}; +#define CTA_STATS_GLOBAL_MAX (__CTA_STATS_GLOBAL_MAX - 1) + +enum ctattr_expect_stats { + CTA_STATS_EXP_UNSPEC, + CTA_STATS_EXP_NEW, + CTA_STATS_EXP_CREATE, + CTA_STATS_EXP_DELETE, + __CTA_STATS_EXP_MAX, +}; +#define CTA_STATS_EXP_MAX (__CTA_STATS_EXP_MAX - 1) + #endif /* _IPCONNTRACK_NETLINK_H */ -- cgit v1.2.3 From d2bb2b9e9161d221badafae063d0c62b41bf3078 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 25 Jun 2012 22:12:20 +0200 Subject: bcma: define some additional cores IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some of them are BCM4706 specific AFAWK. Most of them was confirmed on Netgear WNDR450. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 8deaf6d050c3..12334f9190cb 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -70,6 +70,13 @@ struct bcma_host_ops { /* Core-ID values. */ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_4706_CHIPCOMMON 0x500 +#define BCMA_CORE_4706_SOC_RAM 0x50E +#define BCMA_CORE_4706_MAC_GBIT 0x52D +#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ +#define BCMA_CORE_ALTA 0x534 /* I2S core */ +#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC +#define BCMA_CORE_DDR23_PHY 0x5DD #define BCMA_CORE_INVALID 0x700 #define BCMA_CORE_CHIPCOMMON 0x800 #define BCMA_CORE_ILINE20 0x801 -- cgit v1.2.3 From 4c3af034fafeb7269176bf1310c9bcff0b9fd9bb Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Tue, 26 Jun 2012 23:36:16 +0000 Subject: netlink: Get rid of obsolete rtnetlink macros Removes all RTA_GET*() and RTA_PUT*() variations, as well as the the unused rtattr_strcmp(). Get rid of rtm_get_table() by moving it to its only user decnet. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- include/linux/rtnetlink.h | 129 ---------------------------------------------- 1 file changed, 129 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 2c1de8982c85..ea60b0854109 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -612,12 +612,6 @@ struct tcamsg { #include #include -static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str) -{ - int len = strlen(str) + 1; - return len > rta->rta_len || memcmp(RTA_DATA(rta), str, len); -} - extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo); extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid); extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, @@ -628,122 +622,6 @@ extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id, u32 ts, u32 tsage, long expires, u32 error); -extern void __rta_fill(struct sk_buff *skb, int attrtype, int attrlen, const void *data); - -#define RTA_PUT(skb, attrtype, attrlen, data) \ -({ if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \ - goto rtattr_failure; \ - __rta_fill(skb, attrtype, attrlen, data); }) - -#define RTA_APPEND(skb, attrlen, data) \ -({ if (unlikely(skb_tailroom(skb) < (int)(attrlen))) \ - goto rtattr_failure; \ - memcpy(skb_put(skb, attrlen), data, attrlen); }) - -#define RTA_PUT_NOHDR(skb, attrlen, data) \ -({ RTA_APPEND(skb, RTA_ALIGN(attrlen), data); \ - memset(skb_tail_pointer(skb) - (RTA_ALIGN(attrlen) - attrlen), 0, \ - RTA_ALIGN(attrlen) - attrlen); }) - -#define RTA_PUT_U8(skb, attrtype, value) \ -({ u8 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u8), &_tmp); }) - -#define RTA_PUT_U16(skb, attrtype, value) \ -({ u16 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u16), &_tmp); }) - -#define RTA_PUT_U32(skb, attrtype, value) \ -({ u32 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u32), &_tmp); }) - -#define RTA_PUT_U64(skb, attrtype, value) \ -({ u64 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u64), &_tmp); }) - -#define RTA_PUT_SECS(skb, attrtype, value) \ - RTA_PUT_U64(skb, attrtype, (value) / HZ) - -#define RTA_PUT_MSECS(skb, attrtype, value) \ - RTA_PUT_U64(skb, attrtype, jiffies_to_msecs(value)) - -#define RTA_PUT_STRING(skb, attrtype, value) \ - RTA_PUT(skb, attrtype, strlen(value) + 1, value) - -#define RTA_PUT_FLAG(skb, attrtype) \ - RTA_PUT(skb, attrtype, 0, NULL); - -#define RTA_NEST(skb, type) \ -({ struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \ - RTA_PUT(skb, type, 0, NULL); \ - __start; }) - -#define RTA_NEST_END(skb, start) \ -({ (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \ - (skb)->len; }) - -#define RTA_NEST_COMPAT(skb, type, attrlen, data) \ -({ struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \ - RTA_PUT(skb, type, attrlen, data); \ - RTA_NEST(skb, type); \ - __start; }) - -#define RTA_NEST_COMPAT_END(skb, start) \ -({ struct rtattr *__nest = (void *)(start) + NLMSG_ALIGN((start)->rta_len); \ - (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \ - RTA_NEST_END(skb, __nest); \ - (skb)->len; }) - -#define RTA_NEST_CANCEL(skb, start) \ -({ if (start) \ - skb_trim(skb, (unsigned char *) (start) - (skb)->data); \ - -1; }) - -#define RTA_GET_U8(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u8)) \ - goto rtattr_failure; \ - *(u8 *) RTA_DATA(rta); }) - -#define RTA_GET_U16(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u16)) \ - goto rtattr_failure; \ - *(u16 *) RTA_DATA(rta); }) - -#define RTA_GET_U32(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u32)) \ - goto rtattr_failure; \ - *(u32 *) RTA_DATA(rta); }) - -#define RTA_GET_U64(rta) \ -({ u64 _tmp; \ - if (!rta || RTA_PAYLOAD(rta) < sizeof(u64)) \ - goto rtattr_failure; \ - memcpy(&_tmp, RTA_DATA(rta), sizeof(_tmp)); \ - _tmp; }) - -#define RTA_GET_FLAG(rta) (!!(rta)) - -#define RTA_GET_SECS(rta) ((unsigned long) RTA_GET_U64(rta) * HZ) -#define RTA_GET_MSECS(rta) (msecs_to_jiffies((unsigned long) RTA_GET_U64(rta))) - -static inline struct rtattr * -__rta_reserve(struct sk_buff *skb, int attrtype, int attrlen) -{ - struct rtattr *rta; - int size = RTA_LENGTH(attrlen); - - rta = (struct rtattr*)skb_put(skb, RTA_ALIGN(size)); - rta->rta_type = attrtype; - rta->rta_len = size; - memset(RTA_DATA(rta) + attrlen, 0, RTA_ALIGN(size) - size); - return rta; -} - -#define __RTA_PUT(skb, attrtype, attrlen) \ -({ if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \ - goto rtattr_failure; \ - __rta_reserve(skb, attrtype, attrlen); }) - extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change); /* RTNL is used as a global lock for all changes to network configuration */ @@ -794,13 +672,6 @@ extern void __rtnl_unlock(void); } \ } while(0) -static inline u32 rtm_get_table(struct rtattr **rta, u8 table) -{ - return RTA_GET_U32(rta[RTA_TABLE-1]); -rtattr_failure: - return table; -} - extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, -- cgit v1.2.3 From e440cf2ca0a1b075c64016240d46c3aa9d877bbf Mon Sep 17 00:00:00 2001 From: "parav.pandit@emulex.com" Date: Wed, 27 Jun 2012 03:56:12 +0000 Subject: net: added support for 40GbE link. 1. removed code replication for tov calculation for 1G, 10G and made is common for speed > 1G (1G, 10G, 40G, 100G). 2. defines values for #4 different 40G Phys (KR4, LF4, SR4, CR4) Signed-off-by: Parav Pandit Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 297370a6cb18..21eff418091b 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -1153,6 +1153,10 @@ struct ethtool_ops { #define SUPPORTED_10000baseR_FEC (1 << 20) #define SUPPORTED_20000baseMLD2_Full (1 << 21) #define SUPPORTED_20000baseKR2_Full (1 << 22) +#define SUPPORTED_40000baseKR4_Full (1 << 23) +#define SUPPORTED_40000baseCR4_Full (1 << 24) +#define SUPPORTED_40000baseSR4_Full (1 << 25) +#define SUPPORTED_40000baseLR4_Full (1 << 26) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) @@ -1178,6 +1182,10 @@ struct ethtool_ops { #define ADVERTISED_10000baseR_FEC (1 << 20) #define ADVERTISED_20000baseMLD2_Full (1 << 21) #define ADVERTISED_20000baseKR2_Full (1 << 22) +#define ADVERTISED_40000baseKR4_Full (1 << 23) +#define ADVERTISED_40000baseCR4_Full (1 << 24) +#define ADVERTISED_40000baseSR4_Full (1 << 25) +#define ADVERTISED_40000baseLR4_Full (1 << 26) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the -- cgit v1.2.3 From ac28b9f8cd66d6bc54f8063df59e99abd62173a4 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 27 Jun 2012 07:33:35 +0000 Subject: netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. get_phy_device() gets a new parameter is_c45 to indicate that the PHY device should use the clause 45 protocol, and its callers are adjusted to pass false. The follow-on patch to of_mdio.c will pass true where appropriate. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney Signed-off-by: David S. Miller --- include/linux/phy.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index c291cae8ce32..597d05dd0fb4 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -243,6 +243,15 @@ enum phy_state { PHY_RESUMING }; +/** + * struct phy_c45_device_ids - 802.3-c45 Device Identifiers + * @devices_in_package: Bit vector of devices present. + * @device_ids: The device identifer for each present device. + */ +struct phy_c45_device_ids { + u32 devices_in_package; + u32 device_ids[8]; +}; /* phy_device: An instance of a PHY * @@ -250,6 +259,8 @@ enum phy_state { * bus: Pointer to the bus this PHY is on * dev: driver model device structure for this PHY * phy_id: UID for this device found during discovery + * c45_ids: 802.3-c45 Device Identifers if is_c45. + * is_c45: Set to true if this phy uses clause 45 addressing. * state: state of the PHY for management purposes * dev_flags: Device-specific flags used by the PHY driver. * addr: Bus address of PHY @@ -285,6 +296,9 @@ struct phy_device { u32 phy_id; + struct phy_c45_device_ids c45_ids; + bool is_c45; + enum phy_state state; u32 dev_flags; @@ -480,7 +494,9 @@ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) return mdiobus_write(phydev->bus, phydev->addr, regnum, val); } -struct phy_device* get_phy_device(struct mii_bus *bus, int addr); +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + bool is_c45, struct phy_c45_device_ids *c45_ids); +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); int phy_init_hw(struct phy_device *phydev); struct phy_device * phy_attach(struct net_device *dev, -- cgit v1.2.3 From a30e2c1891296b5ee8de48430a07fdf8b818c661 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 27 Jun 2012 07:33:37 +0000 Subject: netdev/phy/of: Add more methods for binding PHY devices to drivers. Allow PHY drivers to supply their own device matching function (match_phy_device()), or to be matched OF compatible properties. PHYs following IEEE802.3 clause 45 have more than one device identifier constants, which breaks the default device matching code. Other 10G PHYs don't follow the standard manufacturer/device identifier register layout standards, but they do use the standard MDIO bus protocols for register access. Both of these require adjustments to the PHY driver to device matching code. If the there is an of_node associated with such a PHY, we can match it to its driver using the "compatible" properties, just as we do with certain platform devices. If the "compatible" property match fails, first check if there is a driver supplied matching function, and if not fall back to the existing identifier matching rules. Signed-off-by: David Daney Signed-off-by: David S. Miller --- include/linux/phy.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 597d05dd0fb4..7eac80a2557b 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -426,6 +426,12 @@ struct phy_driver { /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); + /* Returns true if this is a suitable driver for the given + * phydev. If NULL, matching is based on phy_id and + * phy_id_mask. + */ + int (*match_phy_device)(struct phy_device *phydev); + /* Handles ethtool queries for hardware time stamping. */ int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti); -- cgit v1.2.3 From 46028e6d10cbf9ccd5fb49aa0c23a430f314144c Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Fri, 15 Jun 2012 16:52:29 +0800 Subject: mm: cleanup on the comments of zone_reclaim_stat Signed-off-by: Wanpeng Li Acked-by: Minchan Kim Signed-off-by: Jiri Kosina --- include/linux/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 4871e31ae277..54631776dff2 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -316,7 +316,7 @@ enum zone_type { struct zone_reclaim_stat { /* * The pageout code in vmscan.c keeps track of how many of the - * mem/swap backed and file backed pages are refeferenced. + * mem/swap backed and file backed pages are referenced. * The higher the rotated/scanned ratio, the more valuable * that cache is. * -- cgit v1.2.3 From ce0e169529a2db1cd910d2d45a5713fcdc29f6e1 Mon Sep 17 00:00:00 2001 From: Mahesh Palivela Date: Fri, 22 Jun 2012 07:27:46 +0000 Subject: wireless: add VHT (802.11ac) definitions Add the VHT definitions to be used by drivers supporting it. Signed-off-by: Mahesh Palivela Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 70 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 318fc1f705b1..abf0e5fe6d24 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1092,6 +1092,73 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 +#define VHT_MCS_SUPPORTED_SET_SIZE 8 + +struct ieee80211_vht_capabilities { + __le32 vht_capabilities_info; + u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; +} __packed; + +struct ieee80211_vht_operation { + u8 vht_op_info_chwidth; + u8 vht_op_info_chan_center_freq_seg1_idx; + u8 vht_op_info_chan_center_freq_seg2_idx; + __le16 vht_basic_mcs_set; +} __packed; + +/** + * struct ieee80211_vht_mcs_info - VHT MCS information + * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams + * @rx_highest: Indicates highest long GI VHT PPDU data rate + * STA can receive. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams + * @tx_highest: Indicates highest long GI VHT PPDU data rate + * STA can transmit. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest TX data rate supported. + */ +struct ieee80211_vht_mcs_info { + __le16 rx_mcs_map; + __le16 rx_highest; + __le16 tx_mcs_map; + __le16 tx_highest; +} __packed; + +#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 +#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 +#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 +#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 + +/* 802.11ac VHT Capabilities */ +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1352,6 +1419,9 @@ enum ieee80211_eid { WLAN_EID_DSE_REGISTERED_LOCATION = 58, WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59, WLAN_EID_EXT_CHANSWITCH_ANN = 60, + + WLAN_EID_VHT_CAPABILITY = 191, + WLAN_EID_VHT_OPERATION = 192, }; /* Action category code */ -- cgit v1.2.3 From bf0c111ec80355ee9fe2e2bdb609a536b54768d8 Mon Sep 17 00:00:00 2001 From: Mahesh Palivela Date: Fri, 22 Jun 2012 07:27:46 +0000 Subject: cfg80211: allow advertising VHT capabilities Allow drivers to advertise their VHT capabilities and export them to userspace via nl80211. Signed-off-by: Mahesh Palivela Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c0fc5d277338..23003272c70e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1813,6 +1813,9 @@ enum nl80211_mpath_info { * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as + * defined in 802.11ac + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -1826,6 +1829,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_HT_AMPDU_FACTOR, NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + NL80211_BAND_ATTR_VHT_MCS_SET, + NL80211_BAND_ATTR_VHT_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 -- cgit v1.2.3 From dccd2304cc907c4b4d2920eeb24b055320fe942e Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Sun, 24 Jun 2012 12:46:05 +0100 Subject: ARM: 7430/1: sizes.h: move from asm-generic to sizes.h is used throughout the AMBA code and drivers, so the header should be available to everyone in order to driver AMBA/PrimeCell peripherals behind a PCI bridge where the host can be any platform (I'm doing it under x86). At this step includes , to allow a grace period for both in-tree and out-of-tree drivers. Signed-off-by: Alessandro Rubini Acked-by: Giancarlo Asnaghi Acked-by: Linus Walleij Cc: Alan Cox Signed-off-by: Russell King --- include/linux/sizes.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 include/linux/sizes.h (limited to 'include/linux') diff --git a/include/linux/sizes.h b/include/linux/sizes.h new file mode 100644 index 000000000000..ce3e8150c174 --- /dev/null +++ b/include/linux/sizes.h @@ -0,0 +1,47 @@ +/* + * include/linux/sizes.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_SIZES_H__ +#define __LINUX_SIZES_H__ + +#define SZ_1 0x00000001 +#define SZ_2 0x00000002 +#define SZ_4 0x00000004 +#define SZ_8 0x00000008 +#define SZ_16 0x00000010 +#define SZ_32 0x00000020 +#define SZ_64 0x00000040 +#define SZ_128 0x00000080 +#define SZ_256 0x00000100 +#define SZ_512 0x00000200 + +#define SZ_1K 0x00000400 +#define SZ_2K 0x00000800 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif /* __LINUX_SIZES_H__ */ -- cgit v1.2.3 From 6d158a813efcd09661c23f16ddf7e2ff834cb20c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 27 Jun 2012 20:46:14 -0400 Subject: tracing: Remove NR_CPUS array from trace_iterator Replace the NR_CPUS array of buffer_iter from the trace_iterator with an allocated array. This will just create an array of possible CPUS instead of the max number specified. The use of NR_CPUS in that array caused allocation failures for machines that were tight on memory. This did not cause any failures to the system itself (no crashes), but caused unnecessary failures for reading the trace files. Added a helper function called 'trace_buffer_iter()' that returns the buffer_iter item or NULL if it is not defined or the array was not allocated. Some routines do not require the array (tracing_open_pipe() for one). Reported-by: Dave Jones Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 1aff18346c71..af961d6f7ab1 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -65,7 +65,7 @@ struct trace_iterator { void *private; int cpu_file; struct mutex mutex; - struct ring_buffer_iter *buffer_iter[NR_CPUS]; + struct ring_buffer_iter **buffer_iter; unsigned long iter_flags; /* trace_seq for __print_flags() and __print_symbolic() etc. */ -- cgit v1.2.3 From bfeea1dc1c9238f9e5a17a265489ecd0d19f66bb Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 20 Jun 2012 09:58:35 -0400 Subject: SUNRPC: Don't decode beyond the end of the RPC reply message Now that xdr_inline_decode() will automatically cross into the page buffers, we need to ensure that it doesn't exceed the total reply message length. This patch sets up a counter that tracks the number of words remaining in the reply message, and ensures that xdr_inline_decode, xdr_read_pages and xdr_enter_page respect the end of message boundary. Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index af70af333546..f1e7f884d1c3 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -205,6 +205,7 @@ struct xdr_stream { struct kvec *iov; /* pointer to the current kvec */ struct kvec scratch; /* Scratch buffer */ struct page **page_ptr; /* pointer to the current page */ + unsigned int nwords; /* Remaining decode buffer length */ }; /* -- cgit v1.2.3 From c337d3655ce85e12c7c476cb81406521926cacd2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 21 Jun 2012 17:05:37 -0400 Subject: SUNRPC: xdr_read_pages should return the amount of XDR encoded page data Callers of xdr_read_pages() will want to know exactly how much XDR data is encoded in the pages after the data realignment. Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index f1e7f884d1c3..2489bce1fb88 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -223,7 +223,7 @@ extern void xdr_init_decode_pages(struct xdr_stream *xdr, struct xdr_buf *buf, struct page **pages, unsigned int len); extern void xdr_set_scratch_buffer(struct xdr_stream *xdr, void *buf, size_t buflen); extern __be32 *xdr_inline_decode(struct xdr_stream *xdr, size_t nbytes); -extern void xdr_read_pages(struct xdr_stream *xdr, unsigned int len); +extern unsigned int xdr_read_pages(struct xdr_stream *xdr, unsigned int len); extern void xdr_enter_page(struct xdr_stream *xdr, unsigned int len); extern int xdr_process_buf(struct xdr_buf *buf, unsigned int offset, unsigned int len, int (*actor)(struct scatterlist *, void *), void *data); -- cgit v1.2.3 From 4517d526c8aa31b5c14165ef180cc19518ff0a35 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 21 Jun 2012 17:14:46 -0400 Subject: SUNRPC: Add the helper xdr_stream_pos Add a helper to report the current offset from the start of the xdr_stream. Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index 2489bce1fb88..647faf2289a7 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -218,6 +218,7 @@ extern void xdr_init_encode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 extern __be32 *xdr_reserve_space(struct xdr_stream *xdr, size_t nbytes); extern void xdr_write_pages(struct xdr_stream *xdr, struct page **pages, unsigned int base, unsigned int len); +extern unsigned int xdr_stream_pos(const struct xdr_stream *xdr); extern void xdr_init_decode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p); extern void xdr_init_decode_pages(struct xdr_stream *xdr, struct xdr_buf *buf, struct page **pages, unsigned int len); -- cgit v1.2.3 From 140150dbb1f9cf3ef963fb55505f994d74ff3276 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 5 Jun 2012 15:20:25 -0400 Subject: SUNRPC: Remove unused function xdr_encode_pages Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index 647faf2289a7..63988990bd36 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -104,8 +104,6 @@ __be32 *xdr_decode_string_inplace(__be32 *p, char **sp, unsigned int *lenp, __be32 *xdr_encode_netobj(__be32 *p, const struct xdr_netobj *); __be32 *xdr_decode_netobj(__be32 *p, struct xdr_netobj *); -void xdr_encode_pages(struct xdr_buf *, struct page **, unsigned int, - unsigned int); void xdr_inline_pages(struct xdr_buf *, unsigned int, struct page **, unsigned int, unsigned int); void xdr_terminate_string(struct xdr_buf *, const u32); -- cgit v1.2.3 From 2f2c63bc221c5fcded24de2704575d0abf96b910 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 8 Jun 2012 11:56:09 -0400 Subject: NFS: Cleanup - only store the write verifier in struct nfs_page The 'committed' field is not needed once we have put the struct nfs_page on the right list. Also correct the type of the verifier: it is not an array of __be32, but simply an 8 byte long opaque array. Signed-off-by: Trond Myklebust --- include/linux/nfs_page.h | 2 +- include/linux/nfs_xdr.h | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 88d166b555e8..880805774f9f 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -42,7 +42,7 @@ struct nfs_page { wb_bytes; /* Length of request */ struct kref wb_kref; /* reference count */ unsigned long wb_flags; - struct nfs_writeverf wb_verf; /* Commit cookie */ + struct nfs_write_verifier wb_verf; /* Commit cookie */ }; struct nfs_pageio_descriptor; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 8aadd90b808a..5c0014d1c969 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -514,9 +514,13 @@ struct nfs_writeargs { struct nfs4_sequence_args seq_args; }; +struct nfs_write_verifier { + char data[8]; +}; + struct nfs_writeverf { + struct nfs_write_verifier verifier; enum nfs3_stable_how committed; - __be32 verifier[2]; }; struct nfs_writeres { -- cgit v1.2.3 From 30dcf76acc695cbd2fa919e294670fe9552e16e7 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 25 Jun 2012 16:13:04 +0800 Subject: libata: migrate ACPI code over to new bindings Now that we have the ability to directly glue the ACPI namespace to the driver model in libata, we don't need the custom code to handle the same thing. Remove it and migrate the functions over to the new code. Signed-off-by: Matthew Garrett Signed-off-by: Holger Macht Signed-off-by: Lin Ming Signed-off-by: Jeff Garzik --- include/linux/libata.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6e887c742a27..888feef3cda4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -545,9 +545,6 @@ struct ata_host { struct mutex eh_mutex; struct task_struct *eh_owner; -#ifdef CONFIG_ATA_ACPI - acpi_handle acpi_handle; -#endif struct ata_port *simplex_claimed; /* channel owning the DMA */ struct ata_port *ports[0]; }; @@ -615,7 +612,6 @@ struct ata_device { struct scsi_device *sdev; /* attached SCSI device */ void *private_data; #ifdef CONFIG_ATA_ACPI - acpi_handle acpi_handle; union acpi_object *gtf_cache; unsigned int gtf_filter; #endif @@ -797,7 +793,6 @@ struct ata_port { void *private_data; #ifdef CONFIG_ATA_ACPI - acpi_handle acpi_handle; struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif /* owned by EH */ @@ -1114,6 +1109,8 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, const struct ata_acpi_gtm *gtm); +acpi_handle ata_ap_acpi_handle(struct ata_port *ap); +acpi_handle ata_dev_acpi_handle(struct ata_device *dev); int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm); #else static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) -- cgit v1.2.3 From b1354cbb5bfce28f2e1ed28d77b362dfdfca638d Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 25 Jun 2012 16:13:08 +0800 Subject: libata: detect Device Attention support Add a new flag ATA_DFLAG_DA to indicate that device supports "Device Attention". Acked-by: Aaron Lu Signed-off-by: Lin Ming Signed-off-by: Jeff Garzik --- include/linux/ata.h | 1 + include/linux/libata.h | 2 ++ 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 32df2b6ef0e0..5713d3ac381a 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -578,6 +578,7 @@ static inline int ata_is_data(u8 prot) ((u64) (id)[(n) + 0]) ) #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) +#define ata_id_has_da(id) ((id)[77] & (1 << 4)) static inline bool ata_id_has_hipm(const u16 *id) { diff --git a/include/linux/libata.h b/include/linux/libata.h index 888feef3cda4..cc22b943db83 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -161,6 +161,8 @@ enum { ATA_DFLAG_DETACH = (1 << 24), ATA_DFLAG_DETACHED = (1 << 25), + ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ + ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ ATA_DEV_ATA_UNSUP = 2, /* ATA device (unsupported) */ -- cgit v1.2.3 From 011e2a7fd5e9e0c2fdba6b9466d53fc437f8bfaf Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 20 Jun 2012 15:53:43 -0400 Subject: NFS: Create a have_delegation rpc_op Delegations are a v4 feature, so push them out of the generic code. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 5c0014d1c969..8787f77c64b3 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1422,6 +1422,7 @@ struct nfs_rpc_ops { struct nfs_open_context *ctx, int open_flags, struct iattr *iattr); + int (*have_delegation)(struct inode *, fmode_t); struct nfs_client * (*init_client) (struct nfs_client *, const struct rpc_timeout *, const char *, rpc_authflavor_t); -- cgit v1.2.3 From 57ec14c55dee2733330327499d16e40f8c23219e Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 20 Jun 2012 15:53:44 -0400 Subject: NFS: Create a return_delegation rpc op Delegations are a v4 feature, so push return_delegation out of the generic client by creating a new rpc_op and renaming the old function to be in the nfs v4 "namespace" Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 8787f77c64b3..62235be07fb8 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1423,6 +1423,7 @@ struct nfs_rpc_ops { int open_flags, struct iattr *iattr); int (*have_delegation)(struct inode *, fmode_t); + int (*return_delegation)(struct inode *); struct nfs_client * (*init_client) (struct nfs_client *, const struct rpc_timeout *, const char *, rpc_authflavor_t); -- cgit v1.2.3 From cdb7ecedec766861e7c4cc35a203518f92023bff Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 20 Jun 2012 15:53:45 -0400 Subject: NFS: Create a free_client rpc_op NFS v4 needs a way to shut down callbacks and sessions, but v2 and v3 don't. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 62235be07fb8..e61dc7235d5d 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1427,6 +1427,7 @@ struct nfs_rpc_ops { struct nfs_client * (*init_client) (struct nfs_client *, const struct rpc_timeout *, const char *, rpc_authflavor_t); + void (*free_client) (struct nfs_client *); }; /* -- cgit v1.2.3 From 6663ee7f8187708143255c057bc132bbc84c1894 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 20 Jun 2012 15:53:46 -0400 Subject: NFS: Create an alloc_client rpc_op This gives NFS v4 a way to set up callbacks and sessions without v2 or v3 having to do them as well. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index e61dc7235d5d..4d62b774ddaf 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1353,6 +1353,7 @@ struct nfs_renamedata { struct nfs_access_entry; struct nfs_client; struct rpc_timeout; +struct nfs_client_initdata; /* * RPC procedure vector for NFSv2/NFSv3 demuxing @@ -1424,6 +1425,7 @@ struct nfs_rpc_ops { struct iattr *iattr); int (*have_delegation)(struct inode *, fmode_t); int (*return_delegation)(struct inode *); + struct nfs_client *(*alloc_client) (const struct nfs_client_initdata *); struct nfs_client * (*init_client) (struct nfs_client *, const struct rpc_timeout *, const char *, rpc_authflavor_t); -- cgit v1.2.3 From 1abb50886afe8a126705c93dab2b50c1252a9c19 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 20 Jun 2012 15:53:47 -0400 Subject: NFS: Create an read_pageio_init() function pNFS needs to select a read function based on the layout driver currently in use, so I let each NFS version decide how to best handle initializing reads. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 4d62b774ddaf..e00b8b3c334e 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1354,6 +1354,7 @@ struct nfs_access_entry; struct nfs_client; struct rpc_timeout; struct nfs_client_initdata; +struct nfs_pageio_descriptor; /* * RPC procedure vector for NFSv2/NFSv3 demuxing @@ -1407,6 +1408,8 @@ struct nfs_rpc_ops { int (*set_capabilities)(struct nfs_server *, struct nfs_fh *); int (*decode_dirent)(struct xdr_stream *, struct nfs_entry *, int); void (*read_setup) (struct nfs_read_data *, struct rpc_message *); + void (*read_pageio_init)(struct nfs_pageio_descriptor *, struct inode *, + const struct nfs_pgio_completion_ops *); void (*read_rpc_prepare)(struct rpc_task *, struct nfs_read_data *); int (*read_done) (struct rpc_task *, struct nfs_read_data *); void (*write_setup) (struct nfs_write_data *, struct rpc_message *); -- cgit v1.2.3 From 57208fa7e51ca16cd68de8e8bf482f16b06d3ea1 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 20 Jun 2012 15:53:48 -0400 Subject: NFS: Create an write_pageio_init() function pNFS needs to select a write function based on the layout driver currently in use, so I let each NFS version decide how to best handle initializing writes. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index e00b8b3c334e..8ed8ec628290 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1413,6 +1413,8 @@ struct nfs_rpc_ops { void (*read_rpc_prepare)(struct rpc_task *, struct nfs_read_data *); int (*read_done) (struct rpc_task *, struct nfs_read_data *); void (*write_setup) (struct nfs_write_data *, struct rpc_message *); + void (*write_pageio_init)(struct nfs_pageio_descriptor *, struct inode *, int, + const struct nfs_pgio_completion_ops *); void (*write_rpc_prepare)(struct rpc_task *, struct nfs_write_data *); int (*write_done) (struct rpc_task *, struct nfs_write_data *); void (*commit_setup) (struct nfs_commit_data *, struct rpc_message *); -- cgit v1.2.3 From b37d2a3a75cb0e72e18c29336cb2095b63dabfc8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 29 Jun 2012 07:47:19 -0300 Subject: [media] i2c: Export an unlocked flavor of i2c_transfer Some drivers (in particular for TV cards) need exclusive access to their I2C buses for specific operations. Export an unlocked flavor of i2c_transfer to give them full control. The unlocked flavor has the following limitations: * Obviously, caller must hold the i2c adapter lock. * No debug messages are logged. We don't want to log messages while holding a rt_mutex. * No check is done on the existence of adap->algo->master_xfer. It is thus the caller's responsibility to ensure that the function is OK to call. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 195d8b3d9cfb..a121c012309a 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -68,6 +68,9 @@ extern int i2c_master_recv(const struct i2c_client *client, char *buf, */ extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num); +/* Unlocked flavor */ +extern int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num); /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, -- cgit v1.2.3 From a31f2d17b331db970259e875b7223d3aba7e3821 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 29 Jun 2012 06:15:21 +0000 Subject: netlink: add netlink_kernel_cfg parameter to netlink_kernel_create This patch adds the following structure: struct netlink_kernel_cfg { unsigned int groups; void (*input)(struct sk_buff *skb); struct mutex *cb_mutex; }; That can be passed to netlink_kernel_create to set optional configurations for netlink kernel sockets. I've populated this structure by looking for NULL and zero parameters at the existing code. The remaining parameters that always need to be set are still left in the original interface. That includes optional parameters for the netlink socket creation. This allows easy extensibility of this interface in the future. This patch also adapts all callers to use this new interface. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/linux/netlink.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index ed33f0901bc2..6085e4919cb3 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -174,11 +174,16 @@ struct netlink_skb_parms { extern void netlink_table_grab(void); extern void netlink_table_ungrab(void); -extern struct sock *netlink_kernel_create(struct net *net, - int unit,unsigned int groups, - void (*input)(struct sk_buff *skb), - struct mutex *cb_mutex, - struct module *module); +/* optional Netlink kernel configuration parameters */ +struct netlink_kernel_cfg { + unsigned int groups; + void (*input)(struct sk_buff *skb); + struct mutex *cb_mutex; +}; + +extern struct sock *netlink_kernel_create(struct net *net, int unit, + struct module *module, + struct netlink_kernel_cfg *cfg); extern void netlink_kernel_release(struct sock *sk); extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups); extern int netlink_change_ngroups(struct sock *sk, unsigned int groups); -- cgit v1.2.3 From 03292745b02d1166e2a215504407e096b8427be5 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 29 Jun 2012 06:15:22 +0000 Subject: netlink: add nlk->netlink_bind hook for module auto-loading This patch adds a hook in the binding path of netlink. This is used by ctnetlink to allow module autoloading for the case in which one user executes: conntrack -E So far, this resulted in nfnetlink loaded, but not nf_conntrack_netlink. I have received in the past many complains on this behaviour. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/linux/netlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 6085e4919cb3..f74dd133788f 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -179,6 +179,7 @@ struct netlink_kernel_cfg { unsigned int groups; void (*input)(struct sk_buff *skb); struct mutex *cb_mutex; + void (*bind)(int group); }; extern struct sock *netlink_kernel_create(struct net *net, int unit, -- cgit v1.2.3 From bb35f67195fcdbe79faa7a15ce148a67c9ab923d Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 29 Jun 2012 05:10:05 +0000 Subject: net: introduce new priv_flag indicating iface capable of change mac when running Introduce IFF_LIVE_ADDR_CHANGE priv_flag and use it to disable netif_running() check in eth_mac_addr() Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if.h b/include/linux/if.h index f995c663c493..1ec407b01e46 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -81,6 +81,8 @@ #define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IFF_TEAM_PORT 0x40000 /* device used as team port */ #define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ +#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address + * change when it's running */ #define IF_GET_IFACE 0x0001 /* for querying only */ -- cgit v1.2.3 From baedee177e6c553af455865718971d9a9c75e537 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 17 Jun 2012 16:40:36 +0200 Subject: firewire: core: add is_local sysfs device attribute Making this information available in sysfs allows to differentiate between controllers in the local and remote Linux PCs, and thus is useful for servers that are started with udev rules. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter --- include/linux/firewire.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/firewire.h b/include/linux/firewire.h index d77f60c6d1ed..cb2445e2e10e 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -138,7 +138,7 @@ struct fw_card { struct fw_attribute_group { struct attribute_group *groups[2]; struct attribute_group group; - struct attribute *attrs[12]; + struct attribute *attrs[13]; }; enum fw_device_state { -- cgit v1.2.3 From 8ec4cf5303e03941fa5fd91bbb9c85bd4ae88c47 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 25 Jun 2012 14:52:49 +0200 Subject: iio:adc: Add AD7265/AD7266 support This patch adds support for the Analog Devices AD7265 and AD7266 Analog-to-Digital converters. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/platform_data/ad7266.h | 54 ++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 include/linux/platform_data/ad7266.h (limited to 'include/linux') diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h new file mode 100644 index 000000000000..eabfdcb26992 --- /dev/null +++ b/include/linux/platform_data/ad7266.h @@ -0,0 +1,54 @@ +/* + * AD7266/65 SPI ADC driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __IIO_ADC_AD7266_H__ +#define __IIO_ADC_AD7266_H__ + +/** + * enum ad7266_range - AD7266 reference voltage range + * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF + * (RANGE pin set to low) + * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF + * (RANGE pin set to high) + */ +enum ad7266_range { + AD7266_RANGE_VREF, + AD7266_RANGE_2VREF, +}; + +/** + * enum ad7266_mode - AD7266 sample mode + * @AD7266_MODE_DIFF: Device is configured for full differential mode + * (SGL/DIFF pin set to low, AD0 pin set to low) + * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode + * (SGL/DIFF pin set to low, AD0 pin set to high) + * @AD7266_MODE_SINGLE_ENDED: Device is configured for single-ended mode + * (SGL/DIFF pin set to high) + */ +enum ad7266_mode { + AD7266_MODE_DIFF, + AD7266_MODE_PSEUDO_DIFF, + AD7266_MODE_SINGLE_ENDED, +}; + +/** + * struct ad7266_platform_data - Platform data for the AD7266 driver + * @range: Reference voltage range the device is configured for + * @mode: Sample mode the device is configured for + * @fixed_addr: Whether the address pins are hard-wired + * @addr_gpios: GPIOs used for controlling the address pins, only used if + * fixed_addr is set to false. + */ +struct ad7266_platform_data { + enum ad7266_range range; + enum ad7266_mode mode; + bool fixed_addr; + unsigned int addr_gpios[3]; +}; + +#endif -- cgit v1.2.3 From 314be14bb89369b2164125b0ec3b24d85b407b62 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Tue, 1 May 2012 21:04:24 +0100 Subject: iio: Rename _st_ functions to loose the bit that meant the staging version. These were originally introduced when the plan was to have parallel IIO cores in and out of staging with a slow move between them. Now we have reached the point where the whole core has moved, they need clearing up! Signed-off-by: Jonathan Cameron --- include/linux/iio/consumer.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 1a15e560a5a1..e2657e6d4d26 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -33,17 +33,17 @@ struct iio_channel { * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' */ -struct iio_channel *iio_st_channel_get(const char *name, - const char *consumer_channel); +struct iio_channel *iio_channel_get(const char *name, + const char *consumer_channel); /** - * iio_st_channel_release() - release channels obtained via iio_st_channel_get + * iio_channel_release() - release channels obtained via iio_channel_get * @chan: The channel to be released. */ -void iio_st_channel_release(struct iio_channel *chan); +void iio_channel_release(struct iio_channel *chan); /** - * iio_st_channel_get_all() - get all channels associated with a client + * iio_channel_get_all() - get all channels associated with a client * @name: name of consumer device. * * Returns an array of iio_channel structures terminated with one with @@ -51,37 +51,37 @@ void iio_st_channel_release(struct iio_channel *chan); * This function is used by fairly generic consumers to get all the * channels registered as having this consumer. */ -struct iio_channel *iio_st_channel_get_all(const char *name); +struct iio_channel *iio_channel_get_all(const char *name); /** - * iio_st_channel_release_all() - reverse iio_st_get_all + * iio_channel_release_all() - reverse iio_channel_get_all * @chan: Array of channels to be released. */ -void iio_st_channel_release_all(struct iio_channel *chan); +void iio_channel_release_all(struct iio_channel *chan); /** - * iio_st_read_channel_raw() - read from a given channel + * iio_read_channel_raw() - read from a given channel * @channel: The channel being queried. * @val: Value read back. * * Note raw reads from iio channels are in adc counts and hence * scale will need to be applied if standard units required. */ -int iio_st_read_channel_raw(struct iio_channel *chan, - int *val); +int iio_read_channel_raw(struct iio_channel *chan, + int *val); /** - * iio_st_get_channel_type() - get the type of a channel + * iio_get_channel_type() - get the type of a channel * @channel: The channel being queried. * @type: The type of the channel. * * returns the enum iio_chan_type of the channel */ -int iio_st_get_channel_type(struct iio_channel *channel, - enum iio_chan_type *type); +int iio_get_channel_type(struct iio_channel *channel, + enum iio_chan_type *type); /** - * iio_st_read_channel_scale() - read the scale value for a channel + * iio_read_channel_scale() - read the scale value for a channel * @channel: The channel being queried. * @val: First part of value read back. * @val2: Second part of value read back. @@ -90,7 +90,7 @@ int iio_st_get_channel_type(struct iio_channel *channel, * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val * + val2/1e6 */ -int iio_st_read_channel_scale(struct iio_channel *chan, int *val, - int *val2); +int iio_read_channel_scale(struct iio_channel *chan, int *val, + int *val2); #endif -- cgit v1.2.3 From 8f5879b20be7f918cdc4b3d831cfd8f3dc02c74c Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 5 May 2012 10:39:22 +0100 Subject: IIO: Add a modifier for sqrt(x^2+y^2) There will probably be a number of such modifiers eventually but this one is used in the adis16204 accelerometer driver. Signed-off-by: Jonathan Cameron --- include/linux/iio/types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index d086736a9033..210559ddf8a3 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -44,6 +44,7 @@ enum iio_modifier { IIO_MOD_X_OR_Y_OR_Z, IIO_MOD_LIGHT_BOTH, IIO_MOD_LIGHT_IR, + IIO_MOD_ROOT_SUM_SQUARED_X_Y, }; #define IIO_VAL_INT 1 -- cgit v1.2.3 From cf82cb8128496955a38fa62e1819ceb1d596e2eb Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 5 May 2012 10:56:41 +0100 Subject: IIO: Add a modifier for x^2+y^2+z^2 There will probably be a number of such modifiers eventually but this one is used in the adis16240 accelerometer driver. Signed-off-by: Jonathan Cameron --- include/linux/iio/types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 210559ddf8a3..e25040173346 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -45,6 +45,7 @@ enum iio_modifier { IIO_MOD_LIGHT_BOTH, IIO_MOD_LIGHT_IR, IIO_MOD_ROOT_SUM_SQUARED_X_Y, + IIO_MOD_SUM_SQUARED_X_Y_Z, }; #define IIO_VAL_INT 1 -- cgit v1.2.3 From a59a4d1921664da63d801ba477950114c71c88c9 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 27 Jun 2012 21:14:38 +0000 Subject: phy: add the EEE support and the way to access to the MMD registers. This patch adds the support for the Energy-Efficient Ethernet (EEE) to the Physical Abstraction Layer. To support the EEE we have to access to the MMD registers 3.20 and 7.60/61. So two new functions have been added to read/write the MMD registers (clause 45). An Ethernet driver (I tested the stmmac) can invoke the phy_init_eee to properly check if the EEE is supported by the PHYs and it can also set the clock stop enable bit in the 3.0 register. The phy_get_eee_err can be used for reporting the number of time where the PHY failed to complete its normal wake sequence. In the end, this patch also adds the EEE ethtool support implementing: o phy_ethtool_set_eee o phy_ethtool_get_eee v1: initial patch v2: fixed some errors especially on naming convention v3: renamed again the mmd read/write functions thank to Ben's feedback v4: moved file to phy.c and added the ethtool support. v5: fixed phy_adv_to_eee, phy_eee_to_supported, phy_eee_to_adv return values according to ethtool API (thanks to Ben's feedback). Renamed some macros to avoid too long names. v6: fixed kernel-doc comments to be properly parsed. Fixed the phy_init_eee function: we need to check which link mode was autonegotiated and then the corresponding bits in 7.60 and 7.61 registers. v7: reviewed the way to get the negotiated settings. v8: fixed a problem in the phy_init_eee return value erroneously added when included the phy_read_status call. v9: do not remove the MDIO_AN_EEE_ADV_100TX and MDIO_AN_EEE_ADV_1000T and fixed the eee_{cap,lp,adv} declaration as "int" instead of u16. Signed-off-by: Giuseppe Cavallaro Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 28 ++++++++++++++++++++++++---- include/linux/mii.h | 9 +++++++++ include/linux/phy.h | 5 +++++ 3 files changed, 38 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index dfb947959ec9..7cccafe50e7b 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -43,7 +43,11 @@ #define MDIO_PKGID2 15 #define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ #define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ +#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ +#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ +#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ +#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ @@ -56,7 +60,6 @@ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ -#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -82,6 +85,7 @@ #define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART #define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE #define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ +#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ /* 10 Gb/s */ #define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) @@ -237,9 +241,25 @@ #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ -/* AN EEE Advertisement register. */ -#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ -#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ +/* EEE Supported/Advertisement/LP Advertisement registers. + * + * EEE capability Register (3.20), Advertisement (7.60) and + * Link partner ability (7.61) registers have and can use the same identical + * bit masks. + */ +#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ +#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ +/* Note: the two defines above can be potentially used by the user-land + * and cannot remove them now. + * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros + * using the previous ones (that can be considered obsolete). + */ +#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ +#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ +#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ +#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ +#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ +#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ /* LASI RX_ALARM control/status registers. */ #define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ diff --git a/include/linux/mii.h b/include/linux/mii.h index 2783eca629a0..8ef3a7a11592 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -21,6 +21,8 @@ #define MII_EXPANSION 0x06 /* Expansion register */ #define MII_CTRL1000 0x09 /* 1000BASE-T control */ #define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ +#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ #define MII_ESTATUS 0x0f /* Extended Status */ #define MII_DCOUNTER 0x12 /* Disconnect counter */ #define MII_FCSCOUNTER 0x13 /* False carrier counter */ @@ -141,6 +143,13 @@ #define FLOW_CTRL_TX 0x01 #define FLOW_CTRL_RX 0x02 +/* MMD Access Control register fields */ +#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ +#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ +#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ +#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ +#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ + /* This structure is used in all SIOCxMIIxxx ioctl calls */ struct mii_ioctl_data { __u16 phy_id; diff --git a/include/linux/phy.h b/include/linux/phy.h index 7eac80a2557b..c35299e4da8e 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -554,6 +554,11 @@ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_scan_fixups(struct phy_device *phydev); +int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); +int phy_get_eee_err(struct phy_device *phydev); +int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); +int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); + int __init mdio_bus_init(void); void mdio_bus_exit(void); -- cgit v1.2.3 From b2df1d4f8b95d9d1e3f064cef02fc5c5116b05cf Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 21 Jun 2012 00:19:33 +0200 Subject: PM / Sleep: Separate printing suspend times from initcall_debug Change the behavior of the newly introduced /sys/power/pm_print_times attribute so that its initial value depends on initcall_debug, but setting it to 0 will cause device suspend/resume times not to be printed, even if initcall_debug has been set. This way, the people who use initcall_debug for reasons other than PM debugging will be able to switch the suspend/resume times printing off, if need be. Signed-off-by: Rafael J. Wysocki Reviewed-by: Srivatsa S. Bhat Acked-by: Greg Kroah-Hartman --- include/linux/suspend.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/suspend.h b/include/linux/suspend.h index cd83059fb592..0c808d7fa579 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -408,6 +408,12 @@ static inline void unlock_system_sleep(void) {} #endif /* !CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM_SLEEP_DEBUG +extern bool pm_print_times_enabled; +#else +#define pm_print_times_enabled (false) +#endif + #ifdef CONFIG_PM_AUTOSLEEP /* kernel/power/autosleep.c */ -- cgit v1.2.3 From 48afb3112e6373a292e54d675e986a5da14c0516 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 26 May 2012 16:58:15 +0100 Subject: dmaengine: PL08x: remove circular_buffer boolean from channel data Circular buffers are not handled in this way; we have a separate API call now to setup circular buffers. So lets not mislead people with this bool. Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl08x.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 02549017212a..0f5b34d668b6 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -51,9 +51,6 @@ enum { * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring * this. - * @circular_buffer: whether the buffer passed in is circular and - * shall simply be looped round round (like a record baby round - * round round round) * @single: the device connected to this channel will request single DMA * transfers, not bursts. (Bursts are default.) * @periph_buses: the device connected to this channel is accessible via @@ -66,7 +63,6 @@ struct pl08x_channel_data { u32 muxval; u32 cctl; dma_addr_t addr; - bool circular_buffer; bool single; u8 periph_buses; }; -- cgit v1.2.3 From aeea1808fe752e917b966961bde3e9603f206dec Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 17 May 2012 15:01:28 +0100 Subject: dmaengine: PL08x: clean up get_signal/put_signal Try to avoid dereferencing the DMA engine's channel struct in these platform helpers; instead, pass a pointer to the channel data into get_signal(), and the returned signal number to put_signal(). Tested-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl08x.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 0f5b34d668b6..88765a62c8f2 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -225,8 +225,8 @@ struct pl08x_platform_data { const struct pl08x_channel_data *slave_channels; unsigned int num_slave_channels; struct pl08x_channel_data memcpy_channel; - int (*get_signal)(struct pl08x_dma_chan *); - void (*put_signal)(struct pl08x_dma_chan *); + int (*get_signal)(const struct pl08x_channel_data *); + void (*put_signal)(const struct pl08x_channel_data *, int); u8 lli_buses; u8 mem_buses; }; -- cgit v1.2.3 From b23f204c8dbbed8e501442c47d7639aac21a3d84 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 May 2012 10:48:44 +0100 Subject: dmaengine: PL08x: move private data structures into amba-pl08x.c Move the driver private data structures into the driver itself, rather than having them exposed to everyone in a header file. Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl08x.h | 141 +-------------------------------------------- 1 file changed, 2 insertions(+), 139 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 88765a62c8f2..48d02bf66ec9 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -21,8 +21,9 @@ #include #include -struct pl08x_lli; struct pl08x_driver_data; +struct pl08x_phy_chan; +struct pl08x_txd; /* Bitmasks for selecting AHB ports for DMA transfers */ enum { @@ -67,144 +68,6 @@ struct pl08x_channel_data { u8 periph_buses; }; -/** - * Struct pl08x_bus_data - information of source or destination - * busses for a transfer - * @addr: current address - * @maxwidth: the maximum width of a transfer on this bus - * @buswidth: the width of this bus in bytes: 1, 2 or 4 - */ -struct pl08x_bus_data { - dma_addr_t addr; - u8 maxwidth; - u8 buswidth; -}; - -/** - * struct pl08x_phy_chan - holder for the physical channels - * @id: physical index to this channel - * @lock: a lock to use when altering an instance of this struct - * @signal: the physical signal (aka channel) serving this physical channel - * right now - * @serving: the virtual channel currently being served by this physical - * channel - * @locked: channel unavailable for the system, e.g. dedicated to secure - * world - */ -struct pl08x_phy_chan { - unsigned int id; - void __iomem *base; - spinlock_t lock; - int signal; - struct pl08x_dma_chan *serving; - bool locked; -}; - -/** - * struct pl08x_sg - structure containing data per sg - * @src_addr: src address of sg - * @dst_addr: dst address of sg - * @len: transfer len in bytes - * @node: node for txd's dsg_list - */ -struct pl08x_sg { - dma_addr_t src_addr; - dma_addr_t dst_addr; - size_t len; - struct list_head node; -}; - -/** - * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor - * @tx: async tx descriptor - * @node: node for txd list for channels - * @dsg_list: list of children sg's - * @direction: direction of transfer - * @llis_bus: DMA memory address (physical) start for the LLIs - * @llis_va: virtual memory address start for the LLIs - * @cctl: control reg values for current txd - * @ccfg: config reg values for current txd - */ -struct pl08x_txd { - struct dma_async_tx_descriptor tx; - struct list_head node; - struct list_head dsg_list; - enum dma_transfer_direction direction; - dma_addr_t llis_bus; - struct pl08x_lli *llis_va; - /* Default cctl value for LLIs */ - u32 cctl; - /* - * Settings to be put into the physical channel when we - * trigger this txd. Other registers are in llis_va[0]. - */ - u32 ccfg; -}; - -/** - * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel - * states - * @PL08X_CHAN_IDLE: the channel is idle - * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport - * channel and is running a transfer on it - * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport - * channel, but the transfer is currently paused - * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport - * channel to become available (only pertains to memcpy channels) - */ -enum pl08x_dma_chan_state { - PL08X_CHAN_IDLE, - PL08X_CHAN_RUNNING, - PL08X_CHAN_PAUSED, - PL08X_CHAN_WAITING, -}; - -/** - * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel - * @chan: wrappped abstract channel - * @phychan: the physical channel utilized by this channel, if there is one - * @phychan_hold: if non-zero, hold on to the physical channel even if we - * have no pending entries - * @tasklet: tasklet scheduled by the IRQ to handle actual work etc - * @name: name of channel - * @cd: channel platform data - * @runtime_addr: address for RX/TX according to the runtime config - * @runtime_direction: current direction of this channel according to - * runtime config - * @pend_list: queued transactions pending on this channel - * @at: active transaction on this channel - * @lock: a lock for this channel data - * @host: a pointer to the host (internal use) - * @state: whether the channel is idle, paused, running etc - * @slave: whether this channel is a device (slave) or for memcpy - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. - * @waiting: a TX descriptor on this channel which is waiting for a physical - * channel to become available - */ -struct pl08x_dma_chan { - struct dma_chan chan; - struct pl08x_phy_chan *phychan; - int phychan_hold; - struct tasklet_struct tasklet; - char *name; - const struct pl08x_channel_data *cd; - dma_addr_t src_addr; - dma_addr_t dst_addr; - u32 src_cctl; - u32 dst_cctl; - enum dma_transfer_direction runtime_direction; - struct list_head pend_list; - struct pl08x_txd *at; - spinlock_t lock; - struct pl08x_driver_data *host; - enum pl08x_dma_chan_state state; - bool slave; - bool device_fc; - struct pl08x_txd *waiting; -}; - /** * struct pl08x_platform_data - the platform configuration for the PL08x * PrimeCells. -- cgit v1.2.3 From 550ec36f507177470a394c4dfffcaf986ca25818 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 28 May 2012 10:18:55 +0100 Subject: dmaengine: PL08x: constify channel names and bus_id strings Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl08x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 48d02bf66ec9..158ce2634b01 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -58,7 +58,7 @@ enum { * these buses (use PL08X_AHB1 | PL08X_AHB2). */ struct pl08x_channel_data { - char *bus_id; + const char *bus_id; int min_signal; int max_signal; u32 muxval; -- cgit v1.2.3 From dc8d5f8de12146c8732d926a30e5f064d76061e0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 May 2012 12:20:55 +0100 Subject: dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config Get rid of the unnecessary checks in dma_slave_config utilizing the DMA direction. This allows us to move the computation of cctl to the prepare function. Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl08x.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 158ce2634b01..2a5f64a11b77 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,7 +47,8 @@ enum { * devices with static assignments * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel - * @cctl_opt: default options for the channel control register + * @cctl_memcpy: options for the channel control register for memcpy + * *** not used for slave channels *** * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -62,7 +63,7 @@ struct pl08x_channel_data { int min_signal; int max_signal; u32 muxval; - u32 cctl; + u32 cctl_memcpy; dma_addr_t addr; bool single; u8 periph_buses; -- cgit v1.2.3 From 4fe23791a4052ad4c8ba79dab9ff5febc8095714 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Sat, 30 Jun 2012 16:05:36 -0700 Subject: regulator: add missing defintion regulator_is_supported_voltage This definition is missing when CONFIG_REGULATOR is not defined. This causes compiler errors when compiling sdhci.c. This can be worked around by adding #ifdef CONFIG_REGULATOR .. #endif but since other definitions are there we have defined the missing definition Signed-off-by: Philip Rakity Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 9ff29ef317c2..da339fd8c755 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -294,6 +294,12 @@ static inline int regulator_get_voltage(struct regulator *regulator) return -EINVAL; } +static inline int regulator_is_supported_voltage(struct regulator *regulator, + int min_uV, int max_uV) +{ + return 0; +} + static inline int regulator_set_current_limit(struct regulator *regulator, int min_uA, int max_uA) { -- cgit v1.2.3 From d172f319c1094ef22d2a00f43e8a7da4dd02c8f3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 29 Jun 2012 09:45:16 +0800 Subject: regulator: tps65217: Convert LDO1 to use regulator_list_voltage_table Convert tps65217_pmic_ldo1_ops to use regulator_list_voltage_table. We have n_voltages and volt_table settings in regulator_desc, so we don't need the table and table_len fields in struct tps_info. Thus remove them from struct tps_info. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/mfd/tps65217.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index 4e035a41a9b0..3a80da103f3f 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -227,8 +227,6 @@ struct tps65217_board { * @max_uV: minimum micro volts * @vsel_to_uv: Function pointer to get voltage from selector * @uv_to_vsel: Function pointer to get selector from voltage - * @table: Table for non-uniform voltage step-size - * @table_len: Length of the voltage table * * This data is used to check the regualtor voltage limits while setting. */ @@ -238,8 +236,6 @@ struct tps_info { int max_uV; int (*vsel_to_uv)(unsigned int vsel); int (*uv_to_vsel)(int uV, unsigned int *vsel); - const int *table; - unsigned int table_len; }; /** -- cgit v1.2.3 From a618e89f1e6fb3cdfc8ef0ad54a0d57830bf8881 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Thu, 14 Jun 2012 16:17:21 +0400 Subject: slab: rename gfpflags to allocflags A consistent name with slub saves us an acessor function. In both caches, this field represents the same thing. We would like to use it from the mem_cgroup code. Signed-off-by: Glauber Costa Acked-by: Christoph Lameter CC: Pekka Enberg Signed-off-by: Pekka Enberg --- include/linux/slab_def.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 1d93f27d81de..0c634fa376c9 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -39,7 +39,7 @@ struct kmem_cache { unsigned int gfporder; /* force GFP flags, e.g. GFP_DMA */ - gfp_t gfpflags; + gfp_t allocflags; size_t colour; /* cache colouring range */ unsigned int colour_off; /* colour offset */ -- cgit v1.2.3 From e2fb50521c3811eddd60d911bc6d4d191f5d6e61 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Wed, 23 May 2012 15:08:10 -0500 Subject: omap2+: add drm device Register OMAP DRM/KMS platform device. DMM is split into a separate device using hwmod. Signed-off-by: Andy Gross Signed-off-by: Rob Clark Signed-off-by: Tony Lindgren --- include/linux/platform_data/omap_drm.h | 52 ++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/platform_data/omap_drm.h (limited to 'include/linux') diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h new file mode 100644 index 000000000000..3da73bdc2031 --- /dev/null +++ b/include/linux/platform_data/omap_drm.h @@ -0,0 +1,52 @@ +/* + * DRM/KMS platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __PLATFORM_DATA_OMAP_DRM_H__ +#define __PLATFORM_DATA_OMAP_DRM_H__ + +/* + * Optional platform data to configure the default configuration of which + * pipes/overlays/CRTCs are used.. if this is not provided, then instead the + * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to + * one manager, with priority given to managers that are connected to + * detected devices. Remaining overlays are used as video planes. This + * should be a good default behavior for most cases, but yet there still + * might be times when you wish to do something different. + */ +struct omap_kms_platform_data { + /* overlays to use as CRTCs: */ + int ovl_cnt; + const int *ovl_ids; + + /* overlays to use as video planes: */ + int pln_cnt; + const int *pln_ids; + + int mgr_cnt; + const int *mgr_ids; + + int dev_cnt; + const char **dev_names; +}; + +struct omap_drm_platform_data { + struct omap_kms_platform_data *kms_pdata; +}; + +#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */ -- cgit v1.2.3 From 5b063b87deba33ed1676db9d16c52ede662132d8 Mon Sep 17 00:00:00 2001 From: Alexandre Pereira da Silva Date: Thu, 14 Jun 2012 10:10:32 -0300 Subject: spi/pl022: cleanup pl022 header documentation Remove the unused fields from struct ssp_config_chip that was removed before Add bus_id documentation to pl022_ssp_controller Signed-off-by: Alexandre Pereira da Silva Signed-off-by: Roland Stigge --- include/linux/amba/pl022.h | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 76dd1b199a1b..fe1d7b283cb6 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -231,6 +231,7 @@ enum ssp_chip_select { struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. + * @bus_id: identifier for this bus * @num_chipselect: chipselects are used to distinguish individual * SPI slaves, and are numbered from zero to num_chipselects - 1. * each slave has a chipselect signal, but it's common that not @@ -259,19 +260,13 @@ struct pl022_ssp_controller { * struct ssp_config_chip - spi_board_info.controller_data for SPI * slave devices, copied to spi_device.controller_data. * - * @lbm: used for test purpose to internally connect RX and TX * @iface: Interface type(Motorola, TI, Microwire, Universal) * @hierarchy: sets whether interface is master or slave * @slave_tx_disable: SSPTXD is disconnected (in slave mode only) * @clk_freq: Tune freq parameters of SSP(when in master mode) - * @endian_rx: Endianess of Data in Rx FIFO - * @endian_tx: Endianess of Data in Tx FIFO - * @data_size: Width of data element(4 to 32 bits) * @com_mode: communication mode: polling, Interrupt or DMA * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode) * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode) - * @clk_phase: Motorola SPI interface Clock phase - * @clk_pol: Motorola SPI interface Clock polarity * @ctrl_len: Microwire interface: Control length * @wait_state: Microwire interface: Wait state * @duplex: Microwire interface: Full/Half duplex @@ -279,8 +274,6 @@ struct pl022_ssp_controller { * before sampling the incoming line * @cs_control: function pointer to board-specific function to * assert/deassert I/O port to control HW generation of devices chip-select. - * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph) - * @dma_config: DMA configuration for SSP controller and peripheral */ struct pl022_config_chip { enum ssp_interface iface; -- cgit v1.2.3 From 3a0c52a6d82cc41da965284412608c74aece34e4 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 2 Jul 2012 09:32:32 +0300 Subject: cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 23003272c70e..74cc55c1bf28 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2545,10 +2545,12 @@ enum nl80211_tx_rate_attributes { * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) */ enum nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, }; /** -- cgit v1.2.3 From b188148c690e15284d5b20d384f950506d02e3e2 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 2 Jul 2012 09:32:35 +0300 Subject: wireless: 60g protocol constants Provide various constants as defined by the 802.11ad: frame types, IE's, capability bits, action categories Introduce GCMP cipher, mandatory by 802.11ad Signed-off-by: Vladimir Kondratiev Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 90 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index abf0e5fe6d24..e02fc682bb68 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -47,6 +47,7 @@ #define IEEE80211_FCTL_MOREDATA 0x2000 #define IEEE80211_FCTL_PROTECTED 0x4000 #define IEEE80211_FCTL_ORDER 0x8000 +#define IEEE80211_FCTL_CTL_EXT 0x0f00 #define IEEE80211_SCTL_FRAG 0x000F #define IEEE80211_SCTL_SEQ 0xFFF0 @@ -54,6 +55,7 @@ #define IEEE80211_FTYPE_MGMT 0x0000 #define IEEE80211_FTYPE_CTL 0x0004 #define IEEE80211_FTYPE_DATA 0x0008 +#define IEEE80211_FTYPE_EXT 0x000c /* management */ #define IEEE80211_STYPE_ASSOC_REQ 0x0000 @@ -70,6 +72,7 @@ #define IEEE80211_STYPE_ACTION 0x00D0 /* control */ +#define IEEE80211_STYPE_CTL_EXT 0x0060 #define IEEE80211_STYPE_BACK_REQ 0x0080 #define IEEE80211_STYPE_BACK 0x0090 #define IEEE80211_STYPE_PSPOLL 0x00A0 @@ -97,6 +100,18 @@ #define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 #define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 +/* extension, added by 802.11ad */ +#define IEEE80211_STYPE_DMG_BEACON 0x0000 + +/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */ +#define IEEE80211_CTL_EXT_POLL 0x2000 +#define IEEE80211_CTL_EXT_SPR 0x3000 +#define IEEE80211_CTL_EXT_GRANT 0x4000 +#define IEEE80211_CTL_EXT_DMG_CTS 0x5000 +#define IEEE80211_CTL_EXT_DMG_DTS 0x6000 +#define IEEE80211_CTL_EXT_SSW 0x8000 +#define IEEE80211_CTL_EXT_SSW_FBACK 0x9000 +#define IEEE80211_CTL_EXT_SSW_ACK 0xa000 /* miscellaneous IEEE 802.11 constants */ #define IEEE80211_MAX_FRAG_THRESHOLD 2352 @@ -1191,6 +1206,21 @@ struct ieee80211_vht_mcs_info { #define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) + +/* DMG (60gHz) 802.11ad */ +/* type - bits 0..1 */ +#define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */ +#define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */ +#define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */ + +#define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2) +#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) +#define WLAN_CAPABILITY_DMG_PRIVACY (1<<4) +#define WLAN_CAPABILITY_DMG_ECPAC (1<<5) + +#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT (1<<8) +#define WLAN_CAPABILITY_DMG_RADIO_MEASURE (1<<12) + /* measurement */ #define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0) #define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1) @@ -1200,7 +1230,6 @@ struct ieee80211_vht_mcs_info { #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 - /* 802.11g ERP information element */ #define WLAN_ERP_NON_ERP_PRESENT (1<<0) #define WLAN_ERP_USE_PROTECTION (1<<1) @@ -1212,6 +1241,16 @@ enum { WLAN_ERP_PREAMBLE_LONG = 1, }; +/* Band ID, 802.11ad #8.4.1.45 */ +enum { + IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */ + IEEE80211_BANDID_SUB1 = 1, /* Sub-1 GHz (excluding TV white spaces) */ + IEEE80211_BANDID_2G = 2, /* 2.4 GHz */ + IEEE80211_BANDID_3G = 3, /* 3.6 GHz */ + IEEE80211_BANDID_5G = 4, /* 4.9 and 5 GHz */ + IEEE80211_BANDID_60G = 5, /* 60 GHz */ +}; + /* Status codes */ enum ieee80211_statuscode { WLAN_STATUS_SUCCESS = 0, @@ -1263,6 +1302,17 @@ enum ieee80211_statuscode { WLAN_STATUS_ANTI_CLOG_REQUIRED = 76, WLAN_STATUS_FCG_NOT_SUPP = 78, WLAN_STATUS_STA_NO_TBTT = 78, + /* 802.11ad */ + WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39, + WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47, + WLAN_STATUS_REJECT_WITH_SCHEDULE = 83, + WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86, + WLAN_STATUS_PERFORMING_FST_NOW = 87, + WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88, + WLAN_STATUS_REJECT_U_PID_SETTING = 89, + WLAN_STATUS_REJECT_DSE_BAND = 96, + WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99, + WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103, }; @@ -1422,6 +1472,40 @@ enum ieee80211_eid { WLAN_EID_VHT_CAPABILITY = 191, WLAN_EID_VHT_OPERATION = 192, + + /* 802.11ad */ + WLAN_EID_NON_TX_BSSID_CAP = 83, + WLAN_EID_WAKEUP_SCHEDULE = 143, + WLAN_EID_EXT_SCHEDULE = 144, + WLAN_EID_STA_AVAILABILITY = 145, + WLAN_EID_DMG_TSPEC = 146, + WLAN_EID_DMG_AT = 147, + WLAN_EID_DMG_CAP = 148, + WLAN_EID_DMG_OPERATION = 151, + WLAN_EID_DMG_BSS_PARAM_CHANGE = 152, + WLAN_EID_DMG_BEAM_REFINEMENT = 153, + WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154, + WLAN_EID_AWAKE_WINDOW = 157, + WLAN_EID_MULTI_BAND = 158, + WLAN_EID_ADDBA_EXT = 159, + WLAN_EID_NEXT_PCP_LIST = 160, + WLAN_EID_PCP_HANDOVER = 161, + WLAN_EID_DMG_LINK_MARGIN = 162, + WLAN_EID_SWITCHING_STREAM = 163, + WLAN_EID_SESSION_TRANSITION = 164, + WLAN_EID_DYN_TONE_PAIRING_REPORT = 165, + WLAN_EID_CLUSTER_REPORT = 166, + WLAN_EID_RELAY_CAP = 167, + WLAN_EID_RELAY_XFER_PARAM_SET = 168, + WLAN_EID_BEAM_LINK_MAINT = 169, + WLAN_EID_MULTIPLE_MAC_ADDR = 170, + WLAN_EID_U_PID = 171, + WLAN_EID_DMG_LINK_ADAPT_ACK = 172, + WLAN_EID_QUIET_PERIOD_REQ = 175, + WLAN_EID_QUIET_PERIOD_RESP = 177, + WLAN_EID_EPAC_POLICY = 182, + WLAN_EID_CLISTER_TIME_OFF = 183, + WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190, }; /* Action category code */ @@ -1438,7 +1522,10 @@ enum ieee80211_category { WLAN_CATEGORY_MESH_ACTION = 13, WLAN_CATEGORY_MULTIHOP_ACTION = 14, WLAN_CATEGORY_SELF_PROTECTED = 15, + WLAN_CATEGORY_DMG = 16, WLAN_CATEGORY_WMM = 17, + WLAN_CATEGORY_FST = 18, + WLAN_CATEGORY_UNPROT_DMG = 20, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1686,6 +1773,7 @@ enum ieee80211_sa_query_action { #define WLAN_CIPHER_SUITE_CCMP 0x000FAC04 #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 #define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 +#define WLAN_CIPHER_SUITE_GCMP 0x000FAC08 #define WLAN_CIPHER_SUITE_SMS4 0x00147201 -- cgit v1.2.3 From cba6d0d64ee53772b285d0c0c288deefbeaf7775 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 2 Jul 2012 07:08:42 -0700 Subject: Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation" This reverts commit 616c310e83b872024271c915c1b9ab505b9efad9. (Move PREEMPT_RCU preemption to switch_to() invocation). Testing by Sasha Levin showed that this can result in deadlock due to invoking the scheduler when one of the runqueue locks is held. Because this commit was simply a performance optimization, revert it. Reported-by: Sasha Levin Signed-off-by: Paul E. McKenney Tested-by: Sasha Levin --- include/linux/rcupdate.h | 1 - include/linux/rcutiny.h | 6 ++++++ include/linux/sched.h | 10 ---------- 3 files changed, 6 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 26d1a47591f1..9cac722b169c 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -184,7 +184,6 @@ static inline int rcu_preempt_depth(void) /* Internal to kernel */ extern void rcu_sched_qs(int cpu); extern void rcu_bh_qs(int cpu); -extern void rcu_preempt_note_context_switch(void); extern void rcu_check_callbacks(int cpu, int user); struct notifier_block; extern void rcu_idle_enter(void); diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index 854dc4c5c271..4e56a9c69a35 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -87,6 +87,10 @@ static inline void kfree_call_rcu(struct rcu_head *head, #ifdef CONFIG_TINY_RCU +static inline void rcu_preempt_note_context_switch(void) +{ +} + static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) { *delta_jiffies = ULONG_MAX; @@ -95,6 +99,7 @@ static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) #else /* #ifdef CONFIG_TINY_RCU */ +void rcu_preempt_note_context_switch(void); int rcu_preempt_needs_cpu(void); static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) @@ -108,6 +113,7 @@ static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) static inline void rcu_note_context_switch(int cpu) { rcu_sched_qs(cpu); + rcu_preempt_note_context_switch(); } /* diff --git a/include/linux/sched.h b/include/linux/sched.h index 4059c0f33f07..06a4c5f4f55c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1871,22 +1871,12 @@ static inline void rcu_copy_process(struct task_struct *p) INIT_LIST_HEAD(&p->rcu_node_entry); } -static inline void rcu_switch_from(struct task_struct *prev) -{ - if (prev->rcu_read_lock_nesting != 0) - rcu_preempt_note_context_switch(); -} - #else static inline void rcu_copy_process(struct task_struct *p) { } -static inline void rcu_switch_from(struct task_struct *prev) -{ -} - #endif #ifdef CONFIG_SMP -- cgit v1.2.3 From 172708d002e0a2aca032b04fe6f2b8525c29244a Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 16 May 2012 15:23:45 -0700 Subject: rcu: Add a gcc-style structure initializer for RCU pointers RCU_INIT_POINTER() returns a value that is never used, and which should be abolished due to terminal ugliness: q = RCU_INIT_POINTER(global_p, p); However, there are two uses that cannot be handled by a do-while formulation because they do gcc-style initialization: RCU_INIT_POINTER(.real_cred, &init_cred), RCU_INIT_POINTER(.cred, &init_cred), This usage is clever, but not necessarily the nicest approach. This commit therefore creates an RCU_POINTER_INITIALIZER() macro that is specifically designed for gcc-style initialization. Signed-off-by: Paul E. McKenney Acked-by: David Howells --- include/linux/rcupdate.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 9cac722b169c..ffe24c09e53d 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -905,6 +905,14 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) #define RCU_INIT_POINTER(p, v) \ p = (typeof(*v) __force __rcu *)(v) +/** + * RCU_POINTER_INITIALIZER() - statically initialize an RCU protected pointer + * + * GCC-style initialization for an RCU-protected pointer in a structure field. + */ +#define RCU_POINTER_INITIALIZER(p, v) \ + .p = (typeof(*v) __force __rcu *)(v) + static __always_inline bool __is_kfree_rcu_offset(unsigned long offset) { return offset < 4096; -- cgit v1.2.3 From d36cc701b28983ea2c8d80afe68aae5452aea3bf Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 16 May 2012 15:33:15 -0700 Subject: rcu: Use new RCU_POINTER_INITIALIZER for gcc-style initializations This commit applies the INIT_RCU_POINTER() macro to all uses of RCU_POINTER_INITIALIZER() that were all too cleverly creating gcc-style initializations. Signed-off-by: Paul E. McKenney Acked-by: David Howells --- include/linux/init_task.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 9e65eff6af3b..8a7476186990 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -168,8 +168,8 @@ extern struct cred init_cred; .children = LIST_HEAD_INIT(tsk.children), \ .sibling = LIST_HEAD_INIT(tsk.sibling), \ .group_leader = &tsk, \ - RCU_INIT_POINTER(.real_cred, &init_cred), \ - RCU_INIT_POINTER(.cred, &init_cred), \ + RCU_POINTER_INITIALIZER(real_cred, &init_cred), \ + RCU_POINTER_INITIALIZER(cred, &init_cred), \ .comm = INIT_TASK_COMM, \ .thread = INIT_THREAD, \ .fs = &init_fs, \ -- cgit v1.2.3 From d1b88eb9e3bccaa43fb5d1bde1cbe210b3434731 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 16 May 2012 15:42:30 -0700 Subject: rcu: Remove return value from RCU_INIT_POINTER() The return value from RCU_INIT_POINTER() is not used, and using it would be quite ugly, for example: q = RCU_INIT_POINTER(global_p, p); To prevent this sort of ugliness from appearing, this commit wraps RCU_INIT_POINTER() in a do-while loop. Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett Acked-by: David Howells --- include/linux/rcupdate.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index ffe24c09e53d..abf44d89c6ce 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -903,7 +903,9 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * the reader-accessible portions of the linked structure. */ #define RCU_INIT_POINTER(p, v) \ - p = (typeof(*v) __force __rcu *)(v) + do { \ + p = (typeof(*v) __force __rcu *)(v); \ + } while (0) /** * RCU_POINTER_INITIALIZER() - statically initialize an RCU protected pointer -- cgit v1.2.3 From e5c1f444d28b1a9eaf9c3927041db0414f684ef4 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 16 May 2012 16:31:38 -0700 Subject: key: Remove extraneous parentheses from rcu_assign_keypointer() This commit removes the extraneous parentheses from rcu_assign_keypointer() so that rcu_assign_pointer() can be wrapped in do-while. It also wraps rcu_assign_keypointer() in a do-while and parenthesizes its final argument, as suggested by David Howells. Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett --- include/linux/key.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/key.h b/include/linux/key.h index 4cd22ed627ef..cef3b315ba7c 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -303,7 +303,9 @@ static inline bool key_is_instantiated(const struct key *key) rwsem_is_locked(&((struct key *)(KEY))->sem))) #define rcu_assign_keypointer(KEY, PAYLOAD) \ - (rcu_assign_pointer((KEY)->payload.rcudata, PAYLOAD)) +do { \ + rcu_assign_pointer((KEY)->payload.rcudata, (PAYLOAD)); \ +} while (0) #ifdef CONFIG_SYSCTL extern ctl_table key_sysctls[]; -- cgit v1.2.3 From e9023c4061054cbf59c5288068118a4d0b152f01 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 16 May 2012 15:51:08 -0700 Subject: rcu: Remove return value from rcu_assign_pointer() The return value from rcu_assign_pointer() is not used, and using it would be quite ugly, for example: q = rcu_assign_pointer(global_p, p); To prevent this sort of ugliness from spreading, this commit wraps rcu_assign_pointer() in a do-while loop. Reported-by: Mathieu Desnoyers Reported-by: Josh Triplett Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett --- include/linux/rcupdate.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index abf44d89c6ce..fb8e6db511d7 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -513,10 +513,10 @@ static inline void rcu_preempt_sleep_check(void) (_________p1); \ }) #define __rcu_assign_pointer(p, v, space) \ - ({ \ + do { \ smp_wmb(); \ (p) = (typeof(*v) __force space *)(v); \ - }) + } while (0) /** @@ -851,7 +851,7 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * * Assigns the specified value to the specified RCU-protected * pointer, ensuring that any concurrent RCU readers will see - * any prior initialization. Returns the value assigned. + * any prior initialization. * * Inserts memory barriers on architectures that require them * (which is most of them), and also prevents the compiler from -- cgit v1.2.3 From 2a3fa843b555d202e682bf08c65ee1a4a93c79cf Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 21 May 2012 11:58:36 -0700 Subject: rcu: Consolidate tree/tiny __rcu_read_{,un}lock() implementations The CONFIG_TREE_PREEMPT_RCU and CONFIG_TINY_PREEMPT_RCU versions of __rcu_read_lock() and __rcu_read_unlock() are identical, so this commit consolidates them into kernel/rcupdate.h. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett --- include/linux/rcupdate.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index fb8e6db511d7..698555ebf49b 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -147,6 +147,7 @@ extern void synchronize_sched(void); extern void __rcu_read_lock(void); extern void __rcu_read_unlock(void); +extern void rcu_read_unlock_special(struct task_struct *t); void synchronize_rcu(void); /* -- cgit v1.2.3 From 28f5c693d03530eb15c5354f758b789189b98c37 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 25 May 2012 14:25:58 -0700 Subject: rcu: Remove function versions of __kfree_rcu and __is_kfree_rcu_offset Commit d8169d4c (Make __kfree_rcu() less dependent on compiler choices) added cpp macro versions of __kfree_rcu() and __is_kfree_rcu_offset(), but failed to remove the old inline-function versions. This commit does this cleanup. Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett --- include/linux/rcupdate.h | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 698555ebf49b..31568c734525 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -916,24 +916,6 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) #define RCU_POINTER_INITIALIZER(p, v) \ .p = (typeof(*v) __force __rcu *)(v) -static __always_inline bool __is_kfree_rcu_offset(unsigned long offset) -{ - return offset < 4096; -} - -static __always_inline -void __kfree_rcu(struct rcu_head *head, unsigned long offset) -{ - typedef void (*rcu_callback)(struct rcu_head *); - - BUILD_BUG_ON(!__builtin_constant_p(offset)); - - /* See the kfree_rcu() header comment. */ - BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); - - kfree_call_rcu(head, (rcu_callback)offset); -} - /* * Does the specified offset indicate that the corresponding rcu_head * structure can be handled by kfree_rcu()? -- cgit v1.2.3 From 62fde6edf12b60fddb13a3f0a779c8be0bb7447e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 22 May 2012 22:10:24 -0700 Subject: rcu: Make __call_rcu() handle invocation from idle Although __call_rcu() is handled correctly when called from a momentary non-idle period, if it is called on a CPU that RCU believes to be idle on RCU_FAST_NO_HZ kernels, the callback might be indefinitely postponed. This commit therefore ensures that RCU is aware of the new callback and has a chance to force the CPU out of dyntick-idle mode when a new callback is posted. Reported-by: Frederic Weisbecker Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett --- include/linux/rcupdate.h | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 31568c734525..26f6417f0264 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -256,6 +256,10 @@ static inline void destroy_rcu_head_on_stack(struct rcu_head *head) } #endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */ +#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP) +extern int rcu_is_cpu_idle(void); +#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP) */ + #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) bool rcu_lockdep_current_cpu_online(void); #else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */ @@ -267,15 +271,6 @@ static inline bool rcu_lockdep_current_cpu_online(void) #ifdef CONFIG_DEBUG_LOCK_ALLOC -#ifdef CONFIG_PROVE_RCU -extern int rcu_is_cpu_idle(void); -#else /* !CONFIG_PROVE_RCU */ -static inline int rcu_is_cpu_idle(void) -{ - return 0; -} -#endif /* else !CONFIG_PROVE_RCU */ - static inline void rcu_lock_acquire(struct lockdep_map *map) { lock_acquire(map, 0, 0, 2, 1, NULL, _THIS_IP_); -- cgit v1.2.3 From 4fa3b6cb1bc8c14b81b4c8ffdfd3f2500a7e9367 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 5 Jun 2012 15:53:53 -0700 Subject: rcu: Fix qlen_lazy breakage Commit d8169d4c (Make __kfree_rcu() less dependent on compiler choices) created a macro out of an inline function in order to avoid build breakage for certain combinations of gcc flags. Unfortunately, it also converted a kfree_call_rcu() to a call_rcu(), which made the rcu_data structure's ->qlen_lazy field lose counts. This commit therefore changes the call_rcu() back to kfree_call_rcu(). Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- include/linux/rcupdate.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 9cac722b169c..46d45e0f9134 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -935,7 +935,7 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset) #define __kfree_rcu(head, offset) \ do { \ BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); \ - call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \ + kfree_call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \ } while (0) /** -- cgit v1.2.3 From d4db2935e4fffeba42540b0dc9d85e3036701221 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 29 Jun 2012 09:56:08 -0600 Subject: KVM: Pass kvm_irqfd to functions Prune this down to just the struct kvm_irqfd so we can avoid changing function definition for every flag or field we use. Signed-off-by: Alex Williamson Acked-by: Cornelia Huck Signed-off-by: Marcelo Tosatti --- include/linux/kvm_host.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index c4464356b35b..96c158a37d3e 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -815,7 +815,7 @@ static inline void kvm_free_irq_routing(struct kvm *kvm) {} #ifdef CONFIG_HAVE_KVM_EVENTFD void kvm_eventfd_init(struct kvm *kvm); -int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags); +int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args); void kvm_irqfd_release(struct kvm *kvm); void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *); int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args); @@ -824,7 +824,7 @@ int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args); static inline void kvm_eventfd_init(struct kvm *kvm) {} -static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags) +static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args) { return -EINVAL; } -- cgit v1.2.3 From ce4409b5821f170c018b94bacb36df1ffadb751f Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 25 Jun 2012 19:22:09 +0800 Subject: video: mxsfb: move mxsfb.h into include/linux Move mxsfb.h into include/linux, so that mxsfb driver does not have to include header. Signed-off-by: Shawn Guo --- include/linux/mxsfb.h | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 include/linux/mxsfb.h (limited to 'include/linux') diff --git a/include/linux/mxsfb.h b/include/linux/mxsfb.h new file mode 100644 index 000000000000..f14943d55315 --- /dev/null +++ b/include/linux/mxsfb.h @@ -0,0 +1,49 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __LINUX_MXSFB_H +#define __LINUX_MXSFB_H + +#include + +#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */ +#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */ +#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */ +#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */ + +#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) +#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ + +struct mxsfb_platform_data { + struct fb_videomode *mode_list; + unsigned mode_count; + + unsigned default_bpp; + + unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */ + unsigned ld_intf_width; /* refer STMLCDIF_* macros */ + + unsigned fb_size; /* Size of the video memory. If zero a + * default will be used + */ + unsigned long fb_phys; /* physical address for the video memory. If + * zero the framebuffer memory will be dynamically + * allocated. If specified,fb_size must also be specified. + * fb_phys must be unused by Linux. + */ +}; + +#endif /* __LINUX_MXSFB_H */ -- cgit v1.2.3 From dc7fd275ae60ef8edf952aff2a62462f5d892fd4 Mon Sep 17 00:00:00 2001 From: ShuoX Liu Date: Tue, 3 Jul 2012 19:05:31 +0200 Subject: cpuidle: move field disable from per-driver to per-cpu Andrew J.Schorr raises a question. When he changes the disable setting on a single CPU, it affects all the other CPUs. Basically, currently, the disable field is per-driver instead of per-cpu. All the C states of the same driver are shared by all CPU in the same machine. The patch changes the `disable' field to per-cpu, so we could set this separately for each cpu. Signed-off-by: ShuoX Liu Reported-by: Andrew J.Schorr Reviewed-by: Yanmin Zhang Signed-off-by: Andrew Morton Signed-off-by: Rafael J. Wysocki --- include/linux/cpuidle.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 6c26a3da0e03..8570012a535a 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -34,6 +34,7 @@ struct cpuidle_driver; struct cpuidle_state_usage { void *driver_data; + unsigned long long disable; unsigned long long usage; unsigned long long time; /* in US */ }; @@ -46,7 +47,6 @@ struct cpuidle_state { unsigned int exit_latency; /* in US */ int power_usage; /* in mW */ unsigned int target_residency; /* in US */ - unsigned int disable; int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, -- cgit v1.2.3 From 6e797a078824b30afbfae6cc4b1c2b21c51761ef Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 16 Jun 2012 15:20:11 +0200 Subject: PM / cpuidle: Add driver reference counter Add a reference counter for the cpuidle driver, so that it can't be unregistered when it is in use. Signed-off-by: Rafael J. Wysocki --- include/linux/cpuidle.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 8570012a535a..27cfced7b57b 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -136,7 +136,9 @@ struct cpuidle_driver { extern void disable_cpuidle(void); extern int cpuidle_idle_call(void); extern int cpuidle_register_driver(struct cpuidle_driver *drv); -struct cpuidle_driver *cpuidle_get_driver(void); +extern struct cpuidle_driver *cpuidle_get_driver(void); +extern struct cpuidle_driver *cpuidle_driver_ref(void); +extern void cpuidle_driver_unref(void); extern void cpuidle_unregister_driver(struct cpuidle_driver *drv); extern int cpuidle_register_device(struct cpuidle_device *dev); extern void cpuidle_unregister_device(struct cpuidle_device *dev); @@ -157,6 +159,8 @@ static inline int cpuidle_idle_call(void) { return -ENODEV; } static inline int cpuidle_register_driver(struct cpuidle_driver *drv) {return -ENODEV; } static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; } +static inline struct cpuidle_driver *cpuidle_driver_ref(void) {return NULL; } +static inline void cpuidle_driver_unref(void) {} static inline void cpuidle_unregister_driver(struct cpuidle_driver *drv) { } static inline int cpuidle_register_device(struct cpuidle_device *dev) {return -ENODEV; } -- cgit v1.2.3 From cbc9ef0287ab764d3da0129efa673808df641fe3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 3 Jul 2012 19:07:42 +0200 Subject: PM / Domains: Add preliminary support for cpuidle, v2 On some systems there are CPU cores located in the same power domains as I/O devices. Then, power can only be removed from the domain if all I/O devices in it are not in use and the CPU core is idle. Add preliminary support for that to the generic PM domains framework. First, the platform is expected to provide a cpuidle driver with one extra state designated for use with the generic PM domains code. This state should be initially disabled and its exit_latency value should be set to whatever time is needed to bring up the CPU core itself after restoring power to it, not including the domain's power on latency. Its .enter() callback should point to a procedure that will remove power from the domain containing the CPU core at the end of the CPU power transition. The remaining characteristics of the extra cpuidle state, referred to as the "domain" cpuidle state below, (e.g. power usage, target residency) should be populated in accordance with the properties of the hardware. Next, the platform should execute genpd_attach_cpuidle() on the PM domain containing the CPU core. That will cause the generic PM domains framework to treat that domain in a special way such that: * When all devices in the domain have been suspended and it is about to be turned off, the states of the devices will be saved, but power will not be removed from the domain. Instead, the "domain" cpuidle state will be enabled so that power can be removed from the domain when the CPU core is idle and the state has been chosen as the target by the cpuidle governor. * When the first I/O device in the domain is resumed and __pm_genpd_poweron(() is called for the first time after power has been removed from the domain, the "domain" cpuidle state will be disabled to avoid subsequent surprise power removals via cpuidle. The effective exit_latency value of the "domain" cpuidle state depends on the time needed to bring up the CPU core itself after restoring power to it as well as on the power on latency of the domain containing the CPU core. Thus the "domain" cpuidle state's exit_latency has to be recomputed every time the domain's power on latency is updated, which may happen every time power is restored to the domain, if the measured power on latency is greater than the latency stored in the corresponding generic_pm_domain structure. Signed-off-by: Rafael J. Wysocki Reviewed-by: Kevin Hilman --- include/linux/cpuidle.h | 1 + include/linux/pm_domain.h | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 27cfced7b57b..8684a0d07b87 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -47,6 +47,7 @@ struct cpuidle_state { unsigned int exit_latency; /* in US */ int power_usage; /* in mW */ unsigned int target_residency; /* in US */ + bool disabled; /* disabled on all CPUs */ int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 30f794eb3826..2febe31d2675 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -15,6 +15,7 @@ #include #include #include +#include enum gpd_status { GPD_STATE_ACTIVE = 0, /* PM domain is active */ @@ -45,6 +46,11 @@ struct gpd_dev_ops { bool (*active_wakeup)(struct device *dev); }; +struct gpd_cpu_data { + unsigned int saved_exit_latency; + struct cpuidle_state *idle_state; +}; + struct generic_pm_domain { struct dev_pm_domain domain; /* PM domain operations */ struct list_head gpd_list_node; /* Node in the global PM domains list */ @@ -75,6 +81,7 @@ struct generic_pm_domain { bool max_off_time_changed; bool cached_power_down_ok; struct device_node *of_node; /* Node in device tree */ + struct gpd_cpu_data *cpu_data; }; static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd) @@ -155,6 +162,8 @@ extern int pm_genpd_add_callbacks(struct device *dev, struct gpd_dev_ops *ops, struct gpd_timing_data *td); extern int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td); +extern int genpd_attach_cpuidle(struct generic_pm_domain *genpd, int state); +extern int genpd_detach_cpuidle(struct generic_pm_domain *genpd); extern void pm_genpd_init(struct generic_pm_domain *genpd, struct dev_power_governor *gov, bool is_off); @@ -211,6 +220,14 @@ static inline int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td) { return -ENOSYS; } +static inline int genpd_attach_cpuidle(struct generic_pm_domain *genpd, int st) +{ + return -ENOSYS; +} +static inline int genpd_detach_cpuidle(struct generic_pm_domain *genpd) +{ + return -ENOSYS; +} static inline void pm_genpd_init(struct generic_pm_domain *genpd, struct dev_power_governor *gov, bool is_off) { -- cgit v1.2.3 From 36c1ed821bd11fb9a3f99a060b1553c114dc2d07 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 15 Jun 2012 15:07:24 -0400 Subject: KVM: Guard mmu_notifier specific code with CONFIG_MMU_NOTIFIER In order to avoid compilation failure when KVM is not compiled in, guard the mmu_notifier specific sections with both CONFIG_MMU_NOTIFIER and KVM_ARCH_WANT_MMU_NOTIFIER, like it is being done in the rest of the KVM code. Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Marcelo Tosatti --- include/linux/kvm_host.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index c7f77876c9b3..e3c86f8c86c9 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -306,7 +306,7 @@ struct kvm { struct hlist_head irq_ack_notifier_list; #endif -#ifdef KVM_ARCH_WANT_MMU_NOTIFIER +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) struct mmu_notifier mmu_notifier; unsigned long mmu_notifier_seq; long mmu_notifier_count; @@ -780,7 +780,7 @@ struct kvm_stats_debugfs_item { extern struct kvm_stats_debugfs_item debugfs_entries[]; extern struct dentry *kvm_debugfs_dir; -#ifdef KVM_ARCH_WANT_MMU_NOTIFIER +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq) { if (unlikely(vcpu->kvm->mmu_notifier_count)) -- cgit v1.2.3 From 79511ed3225a64f6b7fc749f4f9c1ed82f24f729 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Jun 2012 14:23:10 +0100 Subject: regulator: core: Allow fixed enable_time to be set in the regulator_desc Many regulators have a fixed specification for their enable time. Allow this to be set in the regulator_desc as a number to save them having to implement an explicit operation. Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 84f999ed394b..176bd4335581 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -180,6 +180,8 @@ enum regulator_type { * @vsel_mask: Mask for register bitfield used for selector * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops + * + * @enable_time: Time taken for initial enable of regulator (in uS). */ struct regulator_desc { const char *name; @@ -201,6 +203,8 @@ struct regulator_desc { unsigned int vsel_mask; unsigned int enable_reg; unsigned int enable_mask; + + unsigned int enable_time; }; /** -- cgit v1.2.3 From 65f735082de35aa4d44e8d0afe862798d0e09e29 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Jun 2012 14:14:38 +0100 Subject: regulator: core: Add core support for GPIO controlled enable lines It is very common for regulators to support having their enable signal controlled by a GPIO. Since there are a bunch of fiddly things to get right like handling the operations when the enable signal is tied to a rail and it's just replicated code add support for this to the core. Drivers should set ena_gpio in their config if they have a GPIO control, using ena_gpio_flags to specify any flags (including GPIOF_OUT_INIT_ for the initial state) and ena_gpio_invert if the GPIO is active low. The core will then override any enable and disable operations the driver has and instead control the specified GPIO. This will in the future also allow us to further extend the core by identifying when several enable signals have been tied together and handling this properly. Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 176bd4335581..b1b7b8b43ece 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -220,6 +220,9 @@ struct regulator_desc { * @of_node: OpenFirmware node to parse for device tree bindings (may be * NULL). * @regmap: regmap to use for core regmap helpers + * @ena_gpio: GPIO controlling regulator enable. + * @ena_gpio_invert: Sense for GPIO enable control. + * @ena_gpio_flags: Flags to use when calling gpio_request_one() */ struct regulator_config { struct device *dev; @@ -227,6 +230,10 @@ struct regulator_config { void *driver_data; struct device_node *of_node; struct regmap *regmap; + + int ena_gpio; + unsigned int ena_gpio_invert:1; + unsigned int ena_gpio_flags; }; /* @@ -265,6 +272,10 @@ struct regulator_dev { void *reg_data; /* regulator_dev data */ struct dentry *debugfs; + + int ena_gpio; + unsigned int ena_gpio_invert:1; + unsigned int ena_gpio_state:1; }; struct regulator_dev * -- cgit v1.2.3 From 5d589b092ab212bbcc27828167e1c036e7fc77d2 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 23 May 2012 21:22:40 +0800 Subject: pinctrl: remove pinctrl_remove_gpio_range The gpio ranges will be automatically removed when the pinctrl driver is unregistered. Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinctrl.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 3b894a668d32..170a588a55b6 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -131,8 +131,6 @@ extern void pinctrl_unregister(struct pinctrl_dev *pctldev); extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin); extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range); -extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev, - struct pinctrl_gpio_range *range); extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else -- cgit v1.2.3 From 3e5e00b654997aa2c3998d30f7213b9611eb23d7 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 23 May 2012 21:22:41 +0800 Subject: pinctrl: add pinctrl_add_gpio_ranges function Often GPIO ranges are added in batch, so create a special function for that. Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinctrl.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 170a588a55b6..69393a662532 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -131,6 +131,9 @@ extern void pinctrl_unregister(struct pinctrl_dev *pctldev); extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin); extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range); +extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *ranges, + unsigned nranges); extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else -- cgit v1.2.3 From 5a081caa0414b9bbb82c17ffab9d6fe66edbb72f Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Wed, 6 Jun 2012 10:09:25 +0300 Subject: rpmsg: avoid premature deallocation of endpoints When an inbound message arrives, the rpmsg core looks up its associated endpoint and invokes the registered callback. If a message arrives while its endpoint is being removed (because the rpmsg driver was removed, or a recovery of a remote processor has kicked in) we must ensure atomicity, i.e.: - Either the ept is removed before it is found or - The ept is found but will not be freed until the callback returns This is achieved by maintaining a per-ept reference count, which, when drops to zero, will trigger deallocation of the ept. With this in hand, it is now forbidden to directly deallocate epts once they have been added to the endpoints idr. Cc: stable Reported-by: Fernando Guzman Lugo Signed-off-by: Ohad Ben-Cohen --- include/linux/rpmsg.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h index a8e50e44203c..195f373590b8 100644 --- a/include/linux/rpmsg.h +++ b/include/linux/rpmsg.h @@ -38,6 +38,7 @@ #include #include #include +#include /* The feature bitmap for virtio rpmsg */ #define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ @@ -120,6 +121,7 @@ typedef void (*rpmsg_rx_cb_t)(struct rpmsg_channel *, void *, int, void *, u32); /** * struct rpmsg_endpoint - binds a local rpmsg address to its user * @rpdev: rpmsg channel device + * @refcount: when this drops to zero, the ept is deallocated * @cb: rx callback handler * @addr: local rpmsg address * @priv: private data for the driver's use @@ -140,6 +142,7 @@ typedef void (*rpmsg_rx_cb_t)(struct rpmsg_channel *, void *, int, void *, u32); */ struct rpmsg_endpoint { struct rpmsg_channel *rpdev; + struct kref refcount; rpmsg_rx_cb_t cb; u32 addr; void *priv; -- cgit v1.2.3 From 15fd943af50dbc5f7f4de33835795c72595f7bf4 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Thu, 7 Jun 2012 15:39:35 +0300 Subject: rpmsg: make sure inflight messages don't invoke just-removed callbacks When inbound messages arrive, rpmsg core looks up their associated endpoint (by destination address) and then invokes their callback. We've made sure that endpoints will never be de-allocated after they were found by rpmsg core, but we also need to protect against the (rare) scenario where the rpmsg driver was just removed, and its callback function isn't available anymore. This is achieved by introducing a callback mutex, which must be taken before the callback is invoked, and, obviously, before it is removed. Cc: stable Reported-by: Fernando Guzman Lugo Signed-off-by: Ohad Ben-Cohen --- include/linux/rpmsg.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h index 195f373590b8..82a673905edb 100644 --- a/include/linux/rpmsg.h +++ b/include/linux/rpmsg.h @@ -39,6 +39,7 @@ #include #include #include +#include /* The feature bitmap for virtio rpmsg */ #define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ @@ -123,6 +124,7 @@ typedef void (*rpmsg_rx_cb_t)(struct rpmsg_channel *, void *, int, void *, u32); * @rpdev: rpmsg channel device * @refcount: when this drops to zero, the ept is deallocated * @cb: rx callback handler + * @cb_lock: must be taken before accessing/changing @cb * @addr: local rpmsg address * @priv: private data for the driver's use * @@ -144,6 +146,7 @@ struct rpmsg_endpoint { struct rpmsg_channel *rpdev; struct kref refcount; rpmsg_rx_cb_t cb; + struct mutex cb_lock; u32 addr; void *priv; }; -- cgit v1.2.3 From f057bbb6f9ed0fb61ea11105c9ef0ed5ac1a354d Mon Sep 17 00:00:00 2001 From: Rostislav Lisovy Date: Wed, 4 Jul 2012 05:32:03 +0200 Subject: net: em_canid: Ematch rule to match CAN frames according to their identifiers This ematch makes it possible to classify CAN frames (AF_CAN) according to their identifiers. This functionality can not be easily achieved with existing classifiers, such as u32, because CAN identifier is always stored in native endianness, whereas u32 expects Network byte order. Signed-off-by: Rostislav Lisovy Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can.h | 3 +++ include/linux/pkt_cls.h | 5 +++-- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/can.h b/include/linux/can.h index 1a66cf6112ae..018055efc034 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -38,6 +38,9 @@ */ typedef __u32 canid_t; +#define CAN_SFF_ID_BITS 11 +#define CAN_EFF_ID_BITS 29 + /* * Controller Area Network Error Message Frame Mask structure * diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index defbde203d07..38fbd4bc20ab 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -451,8 +451,9 @@ enum { #define TCF_EM_U32 3 #define TCF_EM_META 4 #define TCF_EM_TEXT 5 -#define TCF_EM_VLAN 6 -#define TCF_EM_MAX 6 +#define TCF_EM_VLAN 6 +#define TCF_EM_CANID 7 +#define TCF_EM_MAX 7 enum { TCF_EM_PROG_TC -- cgit v1.2.3 From 46ba5a25f521e3c50d7bb81b1abb977769047456 Mon Sep 17 00:00:00 2001 From: Krishna Kumar Date: Wed, 27 Jun 2012 00:59:56 +0000 Subject: netfilter: nfnetlink_queue: do not allow to set unsupported flag bits Allow setting of only supported flag bits in queue->flags. Signed-off-by: Krishna Kumar Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nfnetlink_queue.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_queue.h b/include/linux/netfilter/nfnetlink_queue.h index e0d8fd8d4d24..3b1c1360aedf 100644 --- a/include/linux/netfilter/nfnetlink_queue.h +++ b/include/linux/netfilter/nfnetlink_queue.h @@ -95,5 +95,6 @@ enum nfqnl_attr_config { /* Flags for NFQA_CFG_FLAGS */ #define NFQA_CFG_F_FAIL_OPEN (1 << 0) #define NFQA_CFG_F_CONNTRACK (1 << 1) +#define NFQA_CFG_F_MAX (1 << 2) #endif /* _NFNETLINK_QUEUE_H */ -- cgit v1.2.3 From cab7faca5e446b84e829d57d2095035d72edba09 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 27 Jun 2012 09:53:47 +0200 Subject: Input: MT - Include win8 support The newly released HID protocol for win8 multitouch devices is capable of transmitting more information about each touch. In particular, it includes details useful for touch alignment. This patch completes the MT protocol with the ABS_MT_TOOL_X/Y events, and documents how to map win8 devices. Cc: Stephane Chatty Cc: Benjamin Tissoires Cc: Peter Hutterer Acked-by: Chase Douglas Signed-off-by: Henrik Rydberg --- include/linux/input.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index a81671453575..cacb95343a7e 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -806,18 +806,20 @@ struct input_keymap_entry { #define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ #define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ #define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ -#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ -#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ #define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ #define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ +#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ +#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ #ifdef __KERNEL__ /* Implementation details, userspace should not care about these */ #define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR -#define ABS_MT_LAST ABS_MT_DISTANCE +#define ABS_MT_LAST ABS_MT_TOOL_Y #endif #define ABS_MAX 0x3f -- cgit v1.2.3 From 2dfd06036ba7ae8e7be2daf5a2fff1dac42390bf Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Wed, 27 Jun 2012 17:09:54 +0800 Subject: aio: make kiocb->private NUll in init_sync_kiocb() Ocfs2 uses kiocb.*private as a flag of unsigned long size. In commit a11f7e6 ocfs2: serialize unaligned aio, the unaligned io flag is involved in it to serialize the unaligned aio. As *private is not initialized in init_sync_kiocb() of do_sync_write(), this unaligned io flag may be unexpectly set in an aligned dio. And this will cause OCFS2_I(inode)->ip_unaligned_aio decreased to -1 in ocfs2_dio_end_io(), thus the following unaligned dio will hang forever at ocfs2_aiodio_wait() in ocfs2_file_aio_write(). Signed-off-by: Junxiao Bi Cc: stable@vger.kernel.org Acked-by: Jeff Moyer Signed-off-by: Joel Becker --- include/linux/aio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/aio.h b/include/linux/aio.h index 2314ad8b3c9c..b1a520ec8b59 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -140,6 +140,7 @@ struct kiocb { (x)->ki_dtor = NULL; \ (x)->ki_obj.tsk = tsk; \ (x)->ki_user_data = 0; \ + (x)->private = NULL; \ } while (0) #define AIO_RING_MAGIC 0xa10a10a1 -- cgit v1.2.3 From 16917b87a23b429226527f393270047069d665e9 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 1 Jul 2012 03:18:50 +0000 Subject: net-next: Add netif_get_num_default_rss_queues Most multi-queue networking driver consider the number of online cpus when configuring RSS queues. This patch adds a wrapper to the number of cpus, setting an upper limit on the number of cpus a driver should consider (by default) when allocating resources for his queues. Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2c2ecea28a1b..ab0251d541ab 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2119,6 +2119,9 @@ static inline int netif_copy_real_num_queues(struct net_device *to_dev, #endif } +#define DEFAULT_MAX_NUM_RSS_QUEUES (8) +extern int netif_get_num_default_rss_queues(void); + /* Use this variant when it is known for sure that it * is executing from hardware interrupt context or with hardware interrupts * disabled. -- cgit v1.2.3 From 6be5bfc3bf0d31a70745a52e69f7f46de974193f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 5 Jul 2012 18:12:01 +0530 Subject: regulator: fixed: dt: support for input supply Add support for input supply in DT parsing of node. The input supply will be provided by the property "vin-supply" in the regulator node. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- include/linux/regulator/fixed.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index f83f7440b488..d6c24c53adf4 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -22,6 +22,7 @@ struct regulator_init_data; /** * struct fixed_voltage_config - fixed_voltage_config structure * @supply_name: Name of the regulator supply + * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator * @gpio: GPIO to use for enable control * set to -EINVAL if not used @@ -46,6 +47,7 @@ struct regulator_init_data; */ struct fixed_voltage_config { const char *supply_name; + const char *input_supply; int microvolts; int gpio; unsigned startup_delay; -- cgit v1.2.3 From f567fde24640cf6f2d6416196bfc8b3fefc8e433 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 20 Jun 2012 14:14:05 +0530 Subject: gpio: fix bits conflict for gpio flags The bit 2 and 3 in GPIO flag are allocated for the flag OPEN_DRAIN/OPEN_SOURCE. These bits are reused for the flag EXPORT/EXPORT_CHANGEABLE and so creating conflict. Fix this conflict by assigning bit 4 and 5 for the flag EXPORT/EXPORT_CHANGEABLE. Signed-off-by: Laxman Dewangan Signed-off-by: Linus Walleij --- include/linux/gpio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gpio.h b/include/linux/gpio.h index f07fc2d08159..2e31e8b3a190 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -22,8 +22,8 @@ /* Gpio pin is open source */ #define GPIOF_OPEN_SOURCE (1 << 3) -#define GPIOF_EXPORT (1 << 2) -#define GPIOF_EXPORT_CHANGEABLE (1 << 3) +#define GPIOF_EXPORT (1 << 4) +#define GPIOF_EXPORT_CHANGEABLE (1 << 5) #define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT) #define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE) -- cgit v1.2.3 From 8eb41c8dfb9e2396d2452ada9023a83d610b9051 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Thu, 5 Jul 2012 14:25:49 +0300 Subject: {nl,cfg}80211: support high bitrates Until now, a u16 value was used to represent bitrate value. With VHT bitrates this becomes too small. Introduce a new 32-bit bitrate attribute. nl80211 will report both the new and the old attribute, unless the bitrate doesn't fit into the old u16 attribute in which case only the new one will be reported. User space tools encouraged to prefer the 32-bit attribute, if available (since it won't be available on older kernels.) Signed-off-by: Vladimir Kondratiev [reword commit message and comments a bit] Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 74cc55c1bf28..db961a59247f 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1638,12 +1638,20 @@ struct nl80211_sta_flag_update { * * These attribute types are used with %NL80211_STA_INFO_TXRATE * when getting information about the bitrate of a station. + * There are 2 attributes for bitrate, a legacy one that represents + * a 16-bit value, and new one that represents a 32-bit value. + * If the rate value fits into 16 bit, both attributes are reported + * with the same value. If the rate is too high to fit into 16 bits + * (>6.5535Gbps) only 32-bit attribute is included. + * User space tools encouraged to use the 32-bit attribute and fall + * back to the 16-bit one for compatibility with older kernels. * * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ @@ -1653,6 +1661,7 @@ enum nl80211_rate_info { NL80211_RATE_INFO_MCS, NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, + NL80211_RATE_INFO_BITRATE32, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, -- cgit v1.2.3 From 5167e8d5417bf5c322a703d2927daec727ea40dd Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 22 Jun 2012 15:52:09 +0200 Subject: sched/nohz: Rewrite and fix load-avg computation -- again Thanks to Charles Wang for spotting the defects in the current code: - If we go idle during the sample window -- after sampling, we get a negative bias because we can negate our own sample. - If we wake up during the sample window we get a positive bias because we push the sample to a known active period. So rewrite the entire nohz load-avg muck once again, now adding copious documentation to the code. Reported-and-tested-by: Doug Smythies Reported-and-tested-by: Charles Wang Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1340373782.18025.74.camel@twins [ minor edits ] Signed-off-by: Ingo Molnar --- include/linux/sched.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 4059c0f33f07..20cb7497c59c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1909,6 +1909,14 @@ static inline int set_cpus_allowed_ptr(struct task_struct *p, } #endif +#ifdef CONFIG_NO_HZ +void calc_load_enter_idle(void); +void calc_load_exit_idle(void); +#else +static inline void calc_load_enter_idle(void) { } +static inline void calc_load_exit_idle(void) { } +#endif /* CONFIG_NO_HZ */ + #ifndef CONFIG_CPUMASK_OFFSTACK static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) { -- cgit v1.2.3 From 1d5fcfec22ce5f69db0d29284d2b65ff8ab1bfaa Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 5 Jul 2012 22:12:32 +0200 Subject: PM / Domains: Add device domain data reference counter Add a mechanism for counting references to the struct generic_pm_domain_data object pointed to by dev->power.subsys_data->domain_data if the device in question belongs to a generic PM domain. This change is necessary for a subsequent patch making it possible to allocate that object from within pm_genpd_add_callbacks(), so that drivers can attach their PM domain device callbacks to devices before those devices are added to PM domains. This patch has been tested on the SH7372 Mackerel board. Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 2febe31d2675..a7d6172922d4 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -112,6 +112,7 @@ struct generic_pm_domain_data { struct gpd_timing_data td; struct notifier_block nb; struct mutex lock; + unsigned int refcount; bool need_restore; bool always_on; }; -- cgit v1.2.3 From 25ac77613aa8fca131599705e3d7da2a0eaa06a0 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 5 Jul 2012 15:23:25 +0200 Subject: ACPI: intel_idle : break dependency between modules When the system is booted with some cpus offline, the idle driver is not initialized. When a cpu is set online, the acpi code call the intel idle init function. Unfortunately this code introduce a dependency between intel_idle and acpi. This patch is intended to remove this dependency by using the notifier of intel_idle. This patch has the benefit of encapsulating the intel_idle driver and remove some exported functions. Signed-off-by: Daniel Lezcano Acked-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- include/linux/cpuidle.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 27cfced7b57b..524bb6f3b6c4 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -206,14 +206,7 @@ struct cpuidle_governor { extern int cpuidle_register_governor(struct cpuidle_governor *gov); extern void cpuidle_unregister_governor(struct cpuidle_governor *gov); -#ifdef CONFIG_INTEL_IDLE -extern int intel_idle_cpu_init(int cpu); #else -static inline int intel_idle_cpu_init(int cpu) { return -1; } -#endif - -#else -static inline int intel_idle_cpu_init(int cpu) { return -1; } static inline int cpuidle_register_governor(struct cpuidle_governor *gov) {return 0;} -- cgit v1.2.3 From 2b719d7baf490e24ce7d817c6337b7c87fda84c1 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 2 May 2012 09:40:03 -0300 Subject: [media] v4l: drop v4l2_buffer.input and V4L2_BUF_FLAG_INPUT Remove input field in struct v4l2_buffer and flag V4L2_BUF_FLAG_INPUT which tells the former is valid. The flag is used by no driver currently. Also change the documentation accordingly. Signed-off-by: Sakari Ailus Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index f79d0cc565ab..a61edb353273 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -657,7 +657,7 @@ struct v4l2_buffer { struct v4l2_plane *planes; } m; __u32 length; - __u32 input; + __u32 reserved2; __u32 reserved; }; @@ -671,7 +671,6 @@ struct v4l2_buffer { /* Buffer is ready, but the data contained within is corrupted. */ #define V4L2_BUF_FLAG_ERROR 0x0040 #define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ -#define V4L2_BUF_FLAG_INPUT 0x0200 /* input field is valid */ #define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */ /* Cache handling flags */ #define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 -- cgit v1.2.3 From b5ab5e24e960b9f780a4cc96815cfd4b0d412720 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Wed, 30 May 2012 22:01:25 +0300 Subject: remoteproc: maintain a generic child device for each rproc For each registered rproc, maintain a generic remoteproc device whose parent is the low level platform-specific device (commonly a pdev, but it may certainly be any other type of device too). With this in hand, the resulting device hierarchy might then look like: omap-rproc.0 | - remoteproc0 <---- new ! | - virtio0 | - virtio1 | - rpmsg0 | - rpmsg1 | - rpmsg2 Where: - omap-rproc.0 is the low level device that's bound to the driver which invokes rproc_register() - remoteproc0 is the result of this patch, and will be added by the remoteproc framework when rproc_register() is invoked - virtio0 and virtio1 are vdevs that are registered by remoteproc when it realizes that they are supported by the firmware of the physical remote processor represented by omap-rproc.0 - rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg channels, and are registerd by the rpmsg bus when it gets notified about their existence Technically, this patch: - changes 'struct rproc' to contain this generic remoteproc.x device - creates a new "remoteproc" type, to which this new generic remoteproc.x device belong to. - adds a super simple enumeration method for the indices of the remoteproc.x devices - updates all dev_* messaging to use the generic remoteproc.x device instead of the low level platform-specific device - updates all dma_* allocations to use the parent of remoteproc.x (where the platform-specific memory pools, most commonly CMA, are to be found) Adding this generic device has several merits: - we can now add remoteproc runtime PM support simply by hooking onto the new "remoteproc" type - all remoteproc log messages will now carry a common name prefix instead of having a platform-specific one - having a device as part of the rproc struct makes it possible to simplify refcounting (see subsequent patch) Thanks to Stephen Boyd for suggesting and discussing these ideas in one of the remoteproc review threads and to Fernando Guzman Lugo for trying them out with the (upcoming) runtime PM support for remoteproc. Cc: Fernando Guzman Lugo Reviewed-by: Stephen Boyd Signed-off-by: Ohad Ben-Cohen --- include/linux/remoteproc.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index f1ffabb978d3..7f806dcf5278 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -369,7 +369,7 @@ enum rproc_state { * @firmware: name of firmware file to be loaded * @priv: private data which belongs to the platform-specific rproc module * @ops: platform-specific start/stop rproc handlers - * @dev: underlying device + * @dev: virtual device for refcounting and common remoteproc behavior * @refcount: refcount of users that have a valid pointer to this rproc * @power: refcount of users who need this rproc powered up * @state: state of the device @@ -383,6 +383,7 @@ enum rproc_state { * @bootaddr: address of first instruction to boot rproc with (optional) * @rvdevs: list of remote virtio devices * @notifyids: idr for dynamically assigning rproc-wide unique notify ids + * @index: index of this rproc device */ struct rproc { struct klist_node node; @@ -391,7 +392,7 @@ struct rproc { const char *firmware; void *priv; const struct rproc_ops *ops; - struct device *dev; + struct device dev; struct kref refcount; atomic_t power; unsigned int state; @@ -405,6 +406,7 @@ struct rproc { u32 bootaddr; struct list_head rvdevs; struct idr notifyids; + int index; }; /* we currently support only two vrings per rvdev */ -- cgit v1.2.3 From 7183a2a799b81490354973117ecd810c23cdc668 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Wed, 30 May 2012 22:02:24 +0300 Subject: remoteproc: remove the now-redundant kref Now that every rproc instance contains a device, we don't need a kref anymore to maintain the refcount of the rproc instances: that's what device are good with! This patch removes the now-redundant kref, and switches to {get, put}_device instead of kref_{get, put}. We also don't need the kref's release function anymore, and instead, we just utilize the class's release handler (which is now responsible for all memory de-allocations). Cc: Stephen Boyd Cc: Fernando Guzman Lugo Signed-off-by: Ohad Ben-Cohen --- include/linux/remoteproc.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 7f806dcf5278..cbe8a51a21de 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -36,7 +36,6 @@ #define REMOTEPROC_H #include -#include #include #include #include @@ -370,7 +369,6 @@ enum rproc_state { * @priv: private data which belongs to the platform-specific rproc module * @ops: platform-specific start/stop rproc handlers * @dev: virtual device for refcounting and common remoteproc behavior - * @refcount: refcount of users that have a valid pointer to this rproc * @power: refcount of users who need this rproc powered up * @state: state of the device * @lock: lock which protects concurrent manipulations of the rproc @@ -393,7 +391,6 @@ struct rproc { void *priv; const struct rproc_ops *ops; struct device dev; - struct kref refcount; atomic_t power; unsigned int state; struct mutex lock; -- cgit v1.2.3 From 40e575b1d0b34b38519d361c10bdf8e0c688957b Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 2 Jul 2012 20:20:53 +0300 Subject: remoteproc: remove the get_by_name/put API MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove rproc_get_by_name() and rproc_put(), and the associated remoteproc infrastructure that supports it (i.e. klist and friends), because: 1. No one uses them 2. Using them is highly discouraged, and any potential user will be deeply scrutinized and encouraged to move. If a user, that absolutely can't live with the direct boot/shutdown model, does show up one day, then bringing this functionality back is going to be trivial. At this point though, keeping this functionality around is way too much of a maintenance burden. Cc: Sjur Brændeland Cc: Loic Pallardy Cc: Ludovic BARRE Cc: Michal Simek Cc: Fernando Guzman Lugo Cc: Suman Anna Cc: Mark Grosen Acked-by: Stephen Boyd Signed-off-by: Ohad Ben-Cohen --- include/linux/remoteproc.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index cbe8a51a21de..b88d6af5ba52 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -449,9 +449,6 @@ struct rproc_vdev { unsigned long gfeatures; }; -struct rproc *rproc_get_by_name(const char *name); -void rproc_put(struct rproc *rproc); - struct rproc *rproc_alloc(struct device *dev, const char *name, const struct rproc_ops *ops, const char *firmware, int len); -- cgit v1.2.3 From 160e7c840fe85836040c43e0058d5afced470c85 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Wed, 4 Jul 2012 16:25:06 +0300 Subject: remoteproc: adopt the driver core's alloc/add/del/put naming MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To make remoteproc's API more intuitive for developers, we adopt the driver core's naming, i.e. alloc -> add -> del -> put. We'll also add register/unregister when their first user shows up. Otherwise - there's no functional change here. Suggested by Russell King . Cc: Russell King Cc: Fernando Guzman Lugo Cc: Sjur Brændeland Reviewed-by: Linus Walleij Acked-by: Stephen Boyd Signed-off-by: Ohad Ben-Cohen --- include/linux/remoteproc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index b88d6af5ba52..eea3ac86b2b7 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -452,9 +452,9 @@ struct rproc_vdev { struct rproc *rproc_alloc(struct device *dev, const char *name, const struct rproc_ops *ops, const char *firmware, int len); -void rproc_free(struct rproc *rproc); -int rproc_register(struct rproc *rproc); -int rproc_unregister(struct rproc *rproc); +void rproc_put(struct rproc *rproc); +int rproc_add(struct rproc *rproc); +int rproc_del(struct rproc *rproc); int rproc_boot(struct rproc *rproc); void rproc_shutdown(struct rproc *rproc); -- cgit v1.2.3 From e27947c767f5bed15048f4e4dad3e2eb69133697 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 23 May 2012 14:35:23 -0500 Subject: libceph: define and use an explicit CONNECTED state There is no state explicitly defined when a ceph connection is fully operational. So define one. It's set when the connection sequence completes successfully, and is cleared when the connection gets closed. Be a little more careful when examining the old state when a socket disconnect event is reported. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index cc6f9bdcf466..002d504df3b7 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -120,6 +120,7 @@ struct ceph_msg_pos { */ #define CONNECTING 1 #define NEGOTIATING 2 +#define CONNECTED 5 #define STANDBY 8 /* no outgoing messages, socket closed. we keep * the ceph_connection around to maintain shared * state with the peer. */ -- cgit v1.2.3 From 261030215d970c62f799e6e508e3c68fc7ec2aa9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Thu, 21 Jun 2012 12:49:23 -0700 Subject: libceph: drop declaration of ceph_con_get() For some reason the declaration of ceph_con_get() and ceph_con_put() did not get deleted in this commit: d59315ca libceph: drop ceph_con_get/put helpers and nref member Clean that up. Signed-off-by: Alex Elder --- include/linux/ceph/messenger.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 002d504df3b7..dd4ef1f8ec93 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -244,8 +244,6 @@ extern void ceph_msg_revoke(struct ceph_msg *msg); extern void ceph_msg_revoke_incoming(struct ceph_msg *msg); extern void ceph_con_keepalive(struct ceph_connection *con); -extern struct ceph_connection *ceph_con_get(struct ceph_connection *con); -extern void ceph_con_put(struct ceph_connection *con); extern struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags, bool can_fail); -- cgit v1.2.3 From b7a9e5dd40f17a48a72f249b8bbc989b63bae5fd Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 27 Jun 2012 12:24:08 -0700 Subject: libceph: set peer name on con_open, not init The peer name may change on each open attempt, even when the connection is reused. Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index dd4ef1f8ec93..478f814f2100 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -232,9 +232,9 @@ extern void ceph_messenger_init(struct ceph_messenger *msgr, extern void ceph_con_init(struct ceph_connection *con, void *private, const struct ceph_connection_operations *ops, - struct ceph_messenger *msgr, __u8 entity_type, - __u64 entity_num); + struct ceph_messenger *msgr); extern void ceph_con_open(struct ceph_connection *con, + __u8 entity_type, __u64 entity_num, struct ceph_entity_addr *addr); extern bool ceph_con_opened(struct ceph_connection *con); extern void ceph_con_close(struct ceph_connection *con); -- cgit v1.2.3 From 326f418b4c74ab4a6066f38b6144bc6461f9447b Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Thu, 28 Jun 2012 15:04:57 -0400 Subject: tracepoint: Use static_key_false(), since static_branch() is deprecated Convert the last user of static_branch() -> static_key_false(). Signed-off-by: Jason Baron Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/5fffcd40a6c063769badcdd74a7d90980500dbcb.1340909155.git.jbaron@redhat.com Signed-off-by: Ingo Molnar --- include/linux/tracepoint.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index bd96ecd0e05c..802de56c41e8 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -153,7 +153,7 @@ static inline void tracepoint_synchronize_unregister(void) } \ static inline void trace_##name##_rcuidle(proto) \ { \ - if (static_branch(&__tracepoint_##name.key)) \ + if (static_key_false(&__tracepoint_##name.key)) \ __DO_TRACE(&__tracepoint_##name, \ TP_PROTO(data_proto), \ TP_ARGS(data_args), \ -- cgit v1.2.3 From 47fbc518a4b5c9a949f7cab8b14a00d3549bf138 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Thu, 28 Jun 2012 15:05:02 -0400 Subject: jump label: Remove static_branch() Remove the obsolete static_branch() interface, since the supported interface is now static_key_false()/true() - which is used by all in-tree code. See commit: c5905afb0e ("static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]()"). Signed-off-by: Jason Baron Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/199332c47eef8005d5a5bf1018a80d25929a5746.1340909155.git.jbaron@redhat.com Signed-off-by: Ingo Molnar --- include/linux/jump_label.h | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h index c513a40510f5..0976fc46d1e0 100644 --- a/include/linux/jump_label.h +++ b/include/linux/jump_label.h @@ -42,8 +42,7 @@ * allowed. * * Not initializing the key (static data is initialized to 0s anyway) is the - * same as using STATIC_KEY_INIT_FALSE and static_key_false() is - * equivalent with static_branch(). + * same as using STATIC_KEY_INIT_FALSE. * */ @@ -107,12 +106,6 @@ static __always_inline bool static_key_true(struct static_key *key) return !static_key_false(key); } -/* Deprecated. Please use 'static_key_false() instead. */ -static __always_inline bool static_branch(struct static_key *key) -{ - return arch_static_branch(key); -} - extern struct jump_entry __start___jump_table[]; extern struct jump_entry __stop___jump_table[]; @@ -166,14 +159,6 @@ static __always_inline bool static_key_true(struct static_key *key) return false; } -/* Deprecated. Please use 'static_key_false() instead. */ -static __always_inline bool static_branch(struct static_key *key) -{ - if (unlikely(atomic_read(&key->enabled)) > 0) - return true; - return false; -} - static inline void static_key_slow_inc(struct static_key *key) { atomic_inc(&key->enabled); -- cgit v1.2.3 From 74a7f08448adea6cb47cd9b260c98ff168117e92 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 15 Jun 2012 11:50:25 -0600 Subject: devicetree: add helper inline for retrieving a node's full name The pattern (np ? np->full_name : "") is rather common in the kernel, but can also make for quite long lines. This patch adds a new inline function, of_node_full_name() so that the test for a valid node pointer doesn't need to be open coded at all call sites. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Signed-off-by: Rob Herring --- include/linux/of.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 2ec1083af7ff..1012377cae92 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -163,6 +163,11 @@ static inline int of_node_to_nid(struct device_node *np) { return -1; } #define of_node_to_nid of_node_to_nid #endif +static inline const char* of_node_full_name(struct device_node *np) +{ + return np ? np->full_name : ""; +} + extern struct device_node *of_find_node_by_name(struct device_node *from, const char *name); #define for_each_node_by_name(dn, name) \ @@ -303,6 +308,11 @@ const char *of_prop_next_string(struct property *prop, const char *cur); #else /* CONFIG_OF */ +static inline const char* of_node_full_name(struct device_node *np) +{ + return ""; +} + static inline bool of_have_populated_dt(void) { return false; -- cgit v1.2.3 From 5cf05ad758c30d17ff23c2be346b5de982bc2121 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 17 May 2012 15:12:45 -0700 Subject: rcu: Fix broken strings in RCU's source code. Although the C language allows you to break strings across lines, doing this makes it hard for people to find the Linux kernel code corresponding to a given console message. This commit therefore fixes broken strings throughout RCU's source code. Suggested-by: Josh Triplett Suggested-by: Ingo Molnar Signed-off-by: Paul E. McKenney --- include/linux/rcupdate.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index c2c0d86dd3ac..115ead2b5155 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -427,8 +427,7 @@ extern int rcu_my_thread_group_empty(void); static inline void rcu_preempt_sleep_check(void) { rcu_lockdep_assert(!lock_is_held(&rcu_lock_map), - "Illegal context switch in RCU read-side " - "critical section"); + "Illegal context switch in RCU read-side critical section"); } #else /* #ifdef CONFIG_PROVE_RCU */ static inline void rcu_preempt_sleep_check(void) -- cgit v1.2.3 From 19181bc50e1b8e92a7a3b3d78637c6dc5c0b5a1b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 4 Jul 2012 09:18:02 +0200 Subject: usbdevfs: Add a USBDEVFS_GET_CAPABILITIES ioctl There are a few (new) usbdevfs capabilities which an application cannot discover in any other way then checking the kernel version. There are 3 problems with this: 1) It is just not very pretty. 2) Given the tendency of enterprise distros to backport stuff it is not reliable. 3) As discussed in length on the mailinglist, USBDEVFS_URB_BULK_CONTINUATION does not work as it should when combined with USBDEVFS_URB_SHORT_NOT_OK (which is its intended use) on devices attached to an XHCI controller. So the availability of these features can be host controller dependent, making depending on them based on the kernel version not a good idea. This patch besides adding the new ioctl also adds flags for the following existing capabilities: USBDEVFS_CAP_ZERO_PACKET, available since 2.6.31 USBDEVFS_CAP_BULK_CONTINUATION, available since 2.6.32, except for XHCI USBDEVFS_CAP_NO_PACKET_SIZE_LIM, available since 3.3 Note that this patch only does not advertise the USBDEVFS_URB_BULK_CONTINUATION cap for XHCI controllers, bulk transfers with this flag set will still be accepted when submitted to XHCI controllers. Returning -EINVAL for them would break existing apps, and in most cases the troublesome scenario wrt USBDEVFS_URB_SHORT_NOT_OK urbs on XHCI controllers will never get hit, so this would break working use cases. The disadvantage of not returning -EINVAL is that cases were it is causing real trouble may go undetected / the cause of the trouble may be unclear, but this is the best we can do. Signed-off-by: Hans de Goede Acked-by: Alan Stern Acked-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 5 +++++ include/linux/usbdevice_fs.h | 7 +++++++ 2 files changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index f717fbdaee8e..d4f9de1acd45 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -331,6 +331,11 @@ struct usb_bus { u8 otg_port; /* 0, or number of OTG/HNP port */ unsigned is_b_host:1; /* true during some HNP roleswitches */ unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ + unsigned no_stop_on_short:1; /* + * Quirk: some controllers don't stop + * the ep queue on a short transfer + * with the URB_SHORT_NOT_OK flag set. + */ unsigned sg_tablesize; /* 0 or largest number of sg list entries */ int devnum_next; /* Next open device number in diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 15591d2ea400..07b2ceaaad70 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -125,6 +125,11 @@ struct usbdevfs_hub_portinfo { char port [127]; /* e.g. port 3 connects to device 27 */ }; +/* Device capability flags */ +#define USBDEVFS_CAP_ZERO_PACKET 0x01 +#define USBDEVFS_CAP_BULK_CONTINUATION 0x02 +#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 + #ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include @@ -204,4 +209,6 @@ struct usbdevfs_ioctl32 { #define USBDEVFS_CONNECT _IO('U', 23) #define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) #define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) +#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) + #endif /* _LINUX_USBDEVICE_FS_H */ -- cgit v1.2.3 From 3d97ff63f8997761f12c8fbe8082996c6eeaba1a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 4 Jul 2012 09:18:03 +0200 Subject: usbdevfs: Use scatter-gather lists for large bulk transfers When using urb->transfer_buffer we need to allocate physical contiguous buffers for the entire transfer, which is pretty much guaranteed to fail with large transfers. Currently userspace works around this by breaking large transfers into multiple urbs. For large bulk transfers this leads to all kind of complications. This patch makes it possible for userspace to reliable submit large bulk transfers to scatter-gather capable host controllers in one go, by using a scatterlist to break the transfer up in managable chunks. Signed-off-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usbdevice_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 07b2ceaaad70..3b74666be027 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -129,6 +129,7 @@ struct usbdevfs_hub_portinfo { #define USBDEVFS_CAP_ZERO_PACKET 0x01 #define USBDEVFS_CAP_BULK_CONTINUATION 0x02 #define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 +#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08 #ifdef __KERNEL__ #ifdef CONFIG_COMPAT -- cgit v1.2.3 From 77c4400f2f0fd8384ab5cbe41d81ccc664896b2d Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 29 Jun 2012 17:48:53 +0800 Subject: USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data This patch rename struct ci13xxx_udc_driver and var with the type. ci13xxx_platform_data reflect it's passed from platfrom driver. Signed-off-by: Richard Zhao Reviewed-by: Felipe Balbi Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/chipidea.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index edb90d6cfd12..d4cf970656fb 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -6,7 +6,7 @@ #define __LINUX_USB_CHIPIDEA_H struct ci13xxx; -struct ci13xxx_udc_driver { +struct ci13xxx_platform_data { const char *name; /* offset of the capability registers */ uintptr_t capoffset; -- cgit v1.2.3 From 19228a6a59250d414824ae07e06ad057a404ea3e Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 6 Jul 2012 14:13:12 +0530 Subject: regulator: tps65910: add support for input supply There is multiple voltage input pins on device which takes the voltage input for different voltage regulator. Support to configure the voltage input supplied by different regulator for each regulators. Signed-off-by: Laxman Dewangan Acked-by: Stephen Warren Signed-off-by: Mark Brown --- include/linux/mfd/tps65910.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index dd8dc0a6c462..c5f806011b32 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -799,6 +799,7 @@ struct tps65910_sleep_keepon_data { /** * struct tps65910_board * Board platform data may be used to initialize regulators. + * @input_supply: Name of input supply regulator. */ struct tps65910_board { @@ -811,6 +812,7 @@ struct tps65910_board { struct tps65910_sleep_keepon_data *slp_keepon; bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS]; + const char *input_supply[TPS65910_NUM_REGS]; struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS]; }; -- cgit v1.2.3 From 7078daa020db5ba501fa3de64b8653c221a640b4 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 14 May 2012 04:34:34 -0300 Subject: [media] uvcvideo: Document the struct uvc_xu_control_query query field Several developers have reported that the lack of macros for the struct uvc_xu_control_query query field in uvcvideo.h was confusing and forced them to look at the driver source code to find out what applications were supposed to pass in that field. Add a comment to the header to clarify the expected usage of the query field. Reported-by: Paulo Assis Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- include/linux/uvcvideo.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/uvcvideo.h b/include/linux/uvcvideo.h index f46a53f060d7..3b081862b9e8 100644 --- a/include/linux/uvcvideo.h +++ b/include/linux/uvcvideo.h @@ -58,7 +58,8 @@ struct uvc_xu_control_mapping { struct uvc_xu_control_query { __u8 unit; __u8 selector; - __u8 query; + __u8 query; /* Video Class-Specific Request Code, */ + /* defined in linux/usb/video.h A.8. */ __u16 size; __u8 __user *data; }; -- cgit v1.2.3 From c133482300113b3b71fa4a1fd2118531e765b36a Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sun, 20 May 2012 11:17:12 -0300 Subject: [media] V4L: Remove "_ACTIVE" from the selection target name definitions This patch drops the _ACTIVE part from the selection target names as a prerequisite to unify the selection target names across the subdev and regular video node API. The meaning of V4L2_SEL_TGT_*_ACTIVE and V4L2_SUBDEV_SEL_TGT_*_ACTUAL selection targets is logically the same. Different names add to confusion where both APIs are used in a single driver or an application. For some system configurations different names may lead to interoperability issues. For backwards compatibility V4L2_SEL_TGT_CROP_ACTIVE and V4L2_SEL_TGT_COMPOSE_ACTIVE are defined as aliases to V4L2_SEL_TGT_CROP and V4L2_SEL_TGT_COMPOSE. These aliases will be removed after deprecation period, according to Documentation/feature-removal-schedule.txt. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Laurent Pinchart Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index a61edb353273..ac1ad33ba3e0 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -767,13 +767,13 @@ struct v4l2_crop { /* Selection targets */ /* Current cropping area */ -#define V4L2_SEL_TGT_CROP_ACTIVE 0x0000 +#define V4L2_SEL_TGT_CROP 0x0000 /* Default cropping area */ #define V4L2_SEL_TGT_CROP_DEFAULT 0x0001 /* Cropping bounds */ #define V4L2_SEL_TGT_CROP_BOUNDS 0x0002 /* Current composing area */ -#define V4L2_SEL_TGT_COMPOSE_ACTIVE 0x0100 +#define V4L2_SEL_TGT_COMPOSE 0x0100 /* Default composing area */ #define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101 /* Composing bounds */ @@ -781,6 +781,10 @@ struct v4l2_crop { /* Current composing area plus all padding pixels */ #define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 +/* Backward compatibility definitions */ +#define V4L2_SEL_TGT_CROP_ACTIVE V4L2_SEL_TGT_CROP +#define V4L2_SEL_TGT_COMPOSE_ACTIVE V4L2_SEL_TGT_COMPOSE + /** * struct v4l2_selection - selection info * @type: buffer type (do not use *_MPLANE types) -- cgit v1.2.3 From 1ec0ed083988ae433305d7f4158fda8c3a1a23b9 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Thu, 17 May 2012 17:50:45 -0300 Subject: [media] v4l: Remove "_ACTUAL" from subdev selection API target definition names The string "_ACTUAL" does not say anything more about the target names. Drop it. V4L2 selection API was changed by "V4L: Remove "_ACTIVE" from the selection target name definitions" by Sylwester Nawrocki. This patch does the same for the V4L2 subdev API. Signed-off-by: Sakari Ailus Acked-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- include/linux/v4l2-subdev.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h index 812019ee1e06..3cbe6889fcb5 100644 --- a/include/linux/v4l2-subdev.h +++ b/include/linux/v4l2-subdev.h @@ -128,14 +128,19 @@ struct v4l2_subdev_frame_interval_enum { #define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG (1 << 2) /* active cropping area */ -#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL 0x0000 +#define V4L2_SUBDEV_SEL_TGT_CROP 0x0000 /* cropping bounds */ #define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS 0x0002 /* current composing area */ -#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL 0x0100 +#define V4L2_SUBDEV_SEL_TGT_COMPOSE 0x0100 /* composing bounds */ #define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS 0x0102 +/* backward compatibility definitions */ +#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL \ + V4L2_SUBDEV_SEL_TGT_CROP +#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL \ + V4L2_SUBDEV_SEL_TGT_COMPOSE /** * struct v4l2_subdev_selection - selection info -- cgit v1.2.3 From 5689b28890f4a7c4e12290dbf2c29a9d23047335 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Fri, 18 May 2012 09:31:18 -0300 Subject: [media] v4l: Unify selection targets across V4L2 and V4L2 subdev interfaces Change the users of V4L2_SUBDEV_SEL_TGT_* targets to use V4L2_SEL_TGT_* instead. The common definitions are moved to a new header file, include/linux/v4l2-common.h. Signed-off-by: Sakari Ailus Signed-off-by: Sylwester Nawrocki Acked-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- include/linux/v4l2-common.h | 57 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/v4l2-subdev.h | 19 +++------------ include/linux/videodev2.h | 25 +++----------------- 3 files changed, 63 insertions(+), 38 deletions(-) create mode 100644 include/linux/v4l2-common.h (limited to 'include/linux') diff --git a/include/linux/v4l2-common.h b/include/linux/v4l2-common.h new file mode 100644 index 000000000000..e85bf15b5994 --- /dev/null +++ b/include/linux/v4l2-common.h @@ -0,0 +1,57 @@ +/* + * include/linux/v4l2-common.h + * + * Common V4L2 and V4L2 subdev definitions. + * + * Users are advised to #include this file either through videodev2.h + * (V4L2) or through v4l2-subdev.h (V4L2 subdev) rather than to refer + * to this file directly. + * + * Copyright (C) 2012 Nokia Corporation + * Contact: Sakari Ailus + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __V4L2_COMMON__ +#define __V4L2_COMMON__ + +/* Selection target definitions */ + +/* Current cropping area */ +#define V4L2_SEL_TGT_CROP 0x0000 +/* Default cropping area */ +#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001 +/* Cropping bounds */ +#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002 +/* Current composing area */ +#define V4L2_SEL_TGT_COMPOSE 0x0100 +/* Default composing area */ +#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101 +/* Composing bounds */ +#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102 +/* Current composing area plus all padding pixels */ +#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 + +/* Backward compatibility definitions */ +#define V4L2_SEL_TGT_CROP_ACTIVE V4L2_SEL_TGT_CROP +#define V4L2_SEL_TGT_COMPOSE_ACTIVE V4L2_SEL_TGT_COMPOSE +#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL \ + V4L2_SEL_TGT_CROP +#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL \ + V4L2_SEL_TGT_COMPOSE + +#endif /* __V4L2_COMMON__ */ diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h index 3cbe6889fcb5..1d7d45739260 100644 --- a/include/linux/v4l2-subdev.h +++ b/include/linux/v4l2-subdev.h @@ -25,6 +25,7 @@ #include #include +#include #include /** @@ -127,27 +128,13 @@ struct v4l2_subdev_frame_interval_enum { #define V4L2_SUBDEV_SEL_FLAG_SIZE_LE (1 << 1) #define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG (1 << 2) -/* active cropping area */ -#define V4L2_SUBDEV_SEL_TGT_CROP 0x0000 -/* cropping bounds */ -#define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS 0x0002 -/* current composing area */ -#define V4L2_SUBDEV_SEL_TGT_COMPOSE 0x0100 -/* composing bounds */ -#define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS 0x0102 - -/* backward compatibility definitions */ -#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL \ - V4L2_SUBDEV_SEL_TGT_CROP -#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL \ - V4L2_SUBDEV_SEL_TGT_COMPOSE - /** * struct v4l2_subdev_selection - selection info * * @which: either V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY * @pad: pad number, as reported by the media API - * @target: selection target, used to choose one of possible rectangles + * @target: Selection target, used to choose one of possible rectangles, + * defined in v4l2-common.h; V4L2_SEL_TGT_* . * @flags: constraint flags * @r: coordinates of the selection window * @reserved: for future use, set to zero for now diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index ac1ad33ba3e0..7fdb8710c831 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -64,6 +64,7 @@ #include #include #include +#include /* * Common stuff for both V4L1 and V4L2 @@ -764,31 +765,11 @@ struct v4l2_crop { #define V4L2_SEL_FLAG_GE 0x00000001 #define V4L2_SEL_FLAG_LE 0x00000002 -/* Selection targets */ - -/* Current cropping area */ -#define V4L2_SEL_TGT_CROP 0x0000 -/* Default cropping area */ -#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001 -/* Cropping bounds */ -#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002 -/* Current composing area */ -#define V4L2_SEL_TGT_COMPOSE 0x0100 -/* Default composing area */ -#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101 -/* Composing bounds */ -#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102 -/* Current composing area plus all padding pixels */ -#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 - -/* Backward compatibility definitions */ -#define V4L2_SEL_TGT_CROP_ACTIVE V4L2_SEL_TGT_CROP -#define V4L2_SEL_TGT_COMPOSE_ACTIVE V4L2_SEL_TGT_COMPOSE - /** * struct v4l2_selection - selection info * @type: buffer type (do not use *_MPLANE types) - * @target: selection target, used to choose one of possible rectangles + * @target: Selection target, used to choose one of possible rectangles; + * defined in v4l2-common.h; V4L2_SEL_TGT_* . * @flags: constraints flags * @r: coordinates of selection window * @reserved: for future use, rounds structure size to 64 bytes, set to zero -- cgit v1.2.3 From 563df3d0bc2ca103e5ddb76c8b7b3386ed2da0d6 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 13 Jun 2012 16:01:10 -0300 Subject: [media] v4l: Unify selection flags Unify flags on the selection interfaces on V4L2 and V4L2 subdev. Flags are very similar to targets in this case: there are more similarities than differences between the two interfaces. Signed-off-by: Sakari Ailus Acked-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- include/linux/v4l2-common.h | 20 +++++++++++++++++--- include/linux/v4l2-subdev.h | 6 +----- include/linux/videodev2.h | 6 +----- 3 files changed, 19 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/v4l2-common.h b/include/linux/v4l2-common.h index e85bf15b5994..0fa8b64c3cdb 100644 --- a/include/linux/v4l2-common.h +++ b/include/linux/v4l2-common.h @@ -29,7 +29,11 @@ #ifndef __V4L2_COMMON__ #define __V4L2_COMMON__ -/* Selection target definitions */ +/* + * + * Selection interface definitions + * + */ /* Current cropping area */ #define V4L2_SEL_TGT_CROP 0x0000 @@ -46,7 +50,7 @@ /* Current composing area plus all padding pixels */ #define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 -/* Backward compatibility definitions */ +/* Backward compatibility target definitions --- to be removed. */ #define V4L2_SEL_TGT_CROP_ACTIVE V4L2_SEL_TGT_CROP #define V4L2_SEL_TGT_COMPOSE_ACTIVE V4L2_SEL_TGT_COMPOSE #define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL \ @@ -54,4 +58,14 @@ #define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL \ V4L2_SEL_TGT_COMPOSE -#endif /* __V4L2_COMMON__ */ +/* Selection flags */ +#define V4L2_SEL_FLAG_GE (1 << 0) +#define V4L2_SEL_FLAG_LE (1 << 1) +#define V4L2_SEL_FLAG_KEEP_CONFIG (1 << 2) + +/* Backward compatibility flag definitions --- to be removed. */ +#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE V4L2_SEL_FLAG_GE +#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE V4L2_SEL_FLAG_LE +#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG + +#endif /* __V4L2_COMMON__ */ diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h index 1d7d45739260..8c57ee9872bb 100644 --- a/include/linux/v4l2-subdev.h +++ b/include/linux/v4l2-subdev.h @@ -124,10 +124,6 @@ struct v4l2_subdev_frame_interval_enum { __u32 reserved[9]; }; -#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE (1 << 0) -#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE (1 << 1) -#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG (1 << 2) - /** * struct v4l2_subdev_selection - selection info * @@ -135,7 +131,7 @@ struct v4l2_subdev_frame_interval_enum { * @pad: pad number, as reported by the media API * @target: Selection target, used to choose one of possible rectangles, * defined in v4l2-common.h; V4L2_SEL_TGT_* . - * @flags: constraint flags + * @flags: constraint flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*. * @r: coordinates of the selection window * @reserved: for future use, set to zero for now * diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 7fdb8710c831..5d78910f926c 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -761,16 +761,12 @@ struct v4l2_crop { struct v4l2_rect c; }; -/* Hints for adjustments of selection rectangle */ -#define V4L2_SEL_FLAG_GE 0x00000001 -#define V4L2_SEL_FLAG_LE 0x00000002 - /** * struct v4l2_selection - selection info * @type: buffer type (do not use *_MPLANE types) * @target: Selection target, used to choose one of possible rectangles; * defined in v4l2-common.h; V4L2_SEL_TGT_* . - * @flags: constraints flags + * @flags: constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*. * @r: coordinates of selection window * @reserved: for future use, rounds structure size to 64 bytes, set to zero * -- cgit v1.2.3 From 6680884a44207efe8ef6bc56b1c932cce2b89994 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 6 Jul 2012 10:44:19 -0700 Subject: Input: ad7879 - add option to correct xy axis Sebastian Zenker reported that driver swaps x and y samples when the touchscreen leads are connected in accordance with the datasheet specification. Transposed axis can be typically corrected by touch screen calibration however this bug also negatively influences touch pressure measurements. Add an option to correct x and y axis. Signed-off-by: Michael Hennerich Reported-and-tested-by: Sebastian Zenker Signed-off-by: Dmitry Torokhov --- include/linux/spi/ad7879.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h index 6334cee1a3be..58368be0b4c0 100644 --- a/include/linux/spi/ad7879.h +++ b/include/linux/spi/ad7879.h @@ -12,6 +12,8 @@ struct ad7879_platform_data { u16 y_min, y_max; u16 pressure_min, pressure_max; + bool swap_xy; /* swap x and y axes */ + /* [0..255] 0=OFF Starts at 1=550us and goes * all the way to 9.440ms in steps of 35us. */ -- cgit v1.2.3 From c540521bba5d2f24bd2c0417157bfaf8b85e2eee Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Thu, 5 Jul 2012 11:23:24 -0700 Subject: security: Minor improvements to no_new_privs documentation The documentation didn't actually mention how to enable no_new_privs. This also adds a note about possible interactions between no_new_privs and LSMs (i.e. why teaching systemd to set no_new_privs is not necessarily a good idea), and it references the new docs from include/linux/prctl.h. Suggested-by: Rob Landley Signed-off-by: Andy Lutomirski Acked-by: Kees Cook Signed-off-by: James Morris --- include/linux/prctl.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/prctl.h b/include/linux/prctl.h index 3988012255dc..289760f424aa 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -141,6 +141,8 @@ * Changing LSM security domain is considered a new privilege. So, for example, * asking selinux for a specific new context (e.g. with runcon) will result * in execve returning -EPERM. + * + * See Documentation/prctl/no_new_privs.txt for more details. */ #define PR_SET_NO_NEW_PRIVS 38 #define PR_GET_NO_NEW_PRIVS 39 -- cgit v1.2.3 From 3bdff937827da04b487f0a0ac6e1f3a9a1296878 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Sun, 1 Jul 2012 00:47:43 +0200 Subject: iio: cleanup buffer.h comments Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer.h | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index ad4fb1af0f7d..2a2b6b4d8d05 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -85,7 +85,7 @@ struct iio_buffer { /** * iio_buffer_init() - Initialize the buffer structure - * @buffer: buffer to be initialized + * @buffer: buffer to be initialized **/ void iio_buffer_init(struct iio_buffer *buffer); @@ -107,8 +107,9 @@ int iio_scan_mask_query(struct iio_dev *indio_dev, /** * iio_scan_mask_set() - set particular bit in the scan mask - * @buffer: the buffer whose scan mask we are interested in - * @bit: the bit to be set. + * @indio_dev IIO device structure + * @buffer: the buffer whose scan mask we are interested in + * @bit: the bit to be set. **/ int iio_scan_mask_set(struct iio_dev *indio_dev, struct iio_buffer *buffer, int bit); @@ -116,8 +117,8 @@ int iio_scan_mask_set(struct iio_dev *indio_dev, /** * iio_push_to_buffer() - push to a registered buffer. * @buffer: IIO buffer structure for device - * @scan: Full scan. - * @timestamp: + * @data: the data to push to the buffer + * @timestamp: timestamp to associate with the data */ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data, s64 timestamp); @@ -126,7 +127,9 @@ int iio_update_demux(struct iio_dev *indio_dev); /** * iio_buffer_register() - register the buffer with IIO core - * @indio_dev: device with the buffer to be registered + * @indio_dev: device with the buffer to be registered + * @channels: the channel descriptions used to construct buffer + * @num_channels: the number of channels **/ int iio_buffer_register(struct iio_dev *indio_dev, const struct iio_chan_spec *channels, @@ -134,7 +137,7 @@ int iio_buffer_register(struct iio_dev *indio_dev, /** * iio_buffer_unregister() - unregister the buffer from IIO core - * @indio_dev: the device with the buffer to be unregistered + * @indio_dev: the device with the buffer to be unregistered **/ void iio_buffer_unregister(struct iio_dev *indio_dev); -- cgit v1.2.3 From c96d97f4d127b61def87b3ee056bec20cfc265d1 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 5 Jul 2012 04:03:44 +0000 Subject: net/mlx4: Set steering mode according to device capabilities Instead of checking the firmware supported steering mode in various places in the code, add a dedicated field in the mlx4 device capabilities structure which is written once during the initialization flow and read across the code. This also set the grounds for add new steering modes. Currently two modes are supported, and are named after the ConnectX HW versions A0 and B0. A0 steering uses mac_index, vlan_index and priority to steer traffic into pre-defined range of QPs. B0 steering uses Ethernet L2 hashing rules and is enabled only if the firmware supports both unicast and multicast B0 steering, The current steering modes are relevant for Ethernet traffic only, such that Infiniband steering remains untouched. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 6a8f002b8ed3..7f5c9ee42f96 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -70,6 +70,29 @@ enum { MLX4_MFUNC_EQE_MASK = (MLX4_MFUNC_MAX_EQES - 1) }; +/* Driver supports 2 diffrent device methods to manage traffic steering: + * - B0 steering mode - Common low level API for ib and (if supported) eth. + * - A0 steering mode - Limited low level API for eth. In case of IB, + * B0 mode is in use. + */ +enum { + MLX4_STEERING_MODE_A0, + MLX4_STEERING_MODE_B0 +}; + +static inline const char *mlx4_steering_mode_str(int steering_mode) +{ + switch (steering_mode) { + case MLX4_STEERING_MODE_A0: + return "A0 steering"; + + case MLX4_STEERING_MODE_B0: + return "B0 steering"; + default: + return "Unrecognize steering mode"; + } +} + enum { MLX4_DEV_CAP_FLAG_RC = 1LL << 0, MLX4_DEV_CAP_FLAG_UC = 1LL << 1, @@ -295,6 +318,7 @@ struct mlx4_caps { int num_amgms; int reserved_mcgs; int num_qp_per_mgm; + int steering_mode; int num_pds; int reserved_pds; int max_xrcds; -- cgit v1.2.3 From 8fcfb4db74352d3d447b7a559ad54f7577074d19 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 5 Jul 2012 04:03:45 +0000 Subject: net/mlx4_core: Add firmware commands to support device managed flow steering Add support for firmware commands to attach/detach a new device managed steering mode. Such network steering rules allow the user to provide an L2/L3/L4 flow specification to the firmware and have the device to steer traffic that matches that specification to the provided QP. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/cmd.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h index 1f3860a8a109..260695186256 100644 --- a/include/linux/mlx4/cmd.h +++ b/include/linux/mlx4/cmd.h @@ -154,6 +154,10 @@ enum { /* set port opcode modifiers */ MLX4_SET_PORT_PRIO2TC = 0x8, MLX4_SET_PORT_SCHEDULER = 0x9, + + /* register/delete flow steering network rules */ + MLX4_QP_FLOW_STEERING_ATTACH = 0x65, + MLX4_QP_FLOW_STEERING_DETACH = 0x66, }; enum { -- cgit v1.2.3 From 0ff1fb654bec0cff62ddf81a8a8edec4263604a0 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 5 Jul 2012 04:03:46 +0000 Subject: {NET, IB}/mlx4: Add device managed flow steering firmware API The driver is modified to support three operation modes. If supported by firmware use the device managed flow steering API, that which we call device managed steering mode. Else, if the firmware supports the B0 steering mode use it, and finally, if none of the above, use the A0 steering mode. When the steering mode is device managed, the code is modified such that L2 based rules set by the mlx4_en driver for Ethernet unicast and multicast, and the IB stack multicast attach calls done through the mlx4_ib driver are all routed to use the device managed API. When attaching rule using device managed flow steering API, the firmware returns a 64 bit registration id, which is to be provided during detach. Currently the firmware is always programmed during HCA initialization to use standard L2 hashing. Future work should be done to allow configuring the flow-steering hash function with common, non proprietary means. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 108 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 103 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 7f5c9ee42f96..e45fc20bd01f 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -70,14 +70,17 @@ enum { MLX4_MFUNC_EQE_MASK = (MLX4_MFUNC_MAX_EQES - 1) }; -/* Driver supports 2 diffrent device methods to manage traffic steering: +/* Driver supports 3 diffrent device methods to manage traffic steering: + * -device managed - High level API for ib and eth flow steering. FW is + * managing flow steering tables. * - B0 steering mode - Common low level API for ib and (if supported) eth. * - A0 steering mode - Limited low level API for eth. In case of IB, * B0 mode is in use. */ enum { MLX4_STEERING_MODE_A0, - MLX4_STEERING_MODE_B0 + MLX4_STEERING_MODE_B0, + MLX4_STEERING_MODE_DEVICE_MANAGED }; static inline const char *mlx4_steering_mode_str(int steering_mode) @@ -88,6 +91,10 @@ static inline const char *mlx4_steering_mode_str(int steering_mode) case MLX4_STEERING_MODE_B0: return "B0 steering"; + + case MLX4_STEERING_MODE_DEVICE_MANAGED: + return "Device managed flow steering"; + default: return "Unrecognize steering mode"; } @@ -125,7 +132,8 @@ enum { enum { MLX4_DEV_CAP_FLAG2_RSS = 1LL << 0, MLX4_DEV_CAP_FLAG2_RSS_TOP = 1LL << 1, - MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2 + MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2, + MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3 }; #define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90) @@ -319,6 +327,7 @@ struct mlx4_caps { int reserved_mcgs; int num_qp_per_mgm; int steering_mode; + int fs_log_max_ucast_qp_range_size; int num_pds; int reserved_pds; int max_xrcds; @@ -647,9 +656,94 @@ int mlx4_unicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], int mlx4_unicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], enum mlx4_protocol prot); int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], - int block_mcast_loopback, enum mlx4_protocol protocol); + u8 port, int block_mcast_loopback, + enum mlx4_protocol protocol, u64 *reg_id); int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], - enum mlx4_protocol protocol); + enum mlx4_protocol protocol, u64 reg_id); + +enum { + MLX4_DOMAIN_UVERBS = 0x1000, + MLX4_DOMAIN_ETHTOOL = 0x2000, + MLX4_DOMAIN_RFS = 0x3000, + MLX4_DOMAIN_NIC = 0x5000, +}; + +enum mlx4_net_trans_rule_id { + MLX4_NET_TRANS_RULE_ID_ETH = 0, + MLX4_NET_TRANS_RULE_ID_IB, + MLX4_NET_TRANS_RULE_ID_IPV6, + MLX4_NET_TRANS_RULE_ID_IPV4, + MLX4_NET_TRANS_RULE_ID_TCP, + MLX4_NET_TRANS_RULE_ID_UDP, + MLX4_NET_TRANS_RULE_NUM, /* should be last */ +}; + +enum mlx4_net_trans_promisc_mode { + MLX4_FS_PROMISC_NONE = 0, + MLX4_FS_PROMISC_UPLINK, + MLX4_FS_PROMISC_FUNCTION_PORT, + MLX4_FS_PROMISC_ALL_MULTI, +}; + +struct mlx4_spec_eth { + u8 dst_mac[6]; + u8 dst_mac_msk[6]; + u8 src_mac[6]; + u8 src_mac_msk[6]; + u8 ether_type_enable; + __be16 ether_type; + __be16 vlan_id_msk; + __be16 vlan_id; +}; + +struct mlx4_spec_tcp_udp { + __be16 dst_port; + __be16 dst_port_msk; + __be16 src_port; + __be16 src_port_msk; +}; + +struct mlx4_spec_ipv4 { + __be32 dst_ip; + __be32 dst_ip_msk; + __be32 src_ip; + __be32 src_ip_msk; +}; + +struct mlx4_spec_ib { + __be32 r_qpn; + __be32 qpn_msk; + u8 dst_gid[16]; + u8 dst_gid_msk[16]; +}; + +struct mlx4_spec_list { + struct list_head list; + enum mlx4_net_trans_rule_id id; + union { + struct mlx4_spec_eth eth; + struct mlx4_spec_ib ib; + struct mlx4_spec_ipv4 ipv4; + struct mlx4_spec_tcp_udp tcp_udp; + }; +}; + +enum mlx4_net_trans_hw_rule_queue { + MLX4_NET_TRANS_Q_FIFO, + MLX4_NET_TRANS_Q_LIFO, +}; + +struct mlx4_net_trans_rule { + struct list_head list; + enum mlx4_net_trans_hw_rule_queue queue_mode; + bool exclusive; + bool allow_loopback; + enum mlx4_net_trans_promisc_mode promisc_mode; + u8 port; + u16 priority; + u32 qpn; +}; + int mlx4_multicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_multicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); @@ -692,4 +786,8 @@ int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port); int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx); void mlx4_counter_free(struct mlx4_dev *dev, u32 idx); +int mlx4_flow_attach(struct mlx4_dev *dev, + struct mlx4_net_trans_rule *rule, u64 *reg_id); +int mlx4_flow_detach(struct mlx4_dev *dev, u64 reg_id); + #endif /* MLX4_DEVICE_H */ -- cgit v1.2.3 From 592e49dda8122ab621cdc59cc429bdb968ee6364 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 5 Jul 2012 04:03:48 +0000 Subject: net/mlx4: Implement promiscuous mode with device managed flow-steering The device managed flow steering API has three promiscuous modes: 1. Uplink - captures all the packets that arrive to the port. 2. Allmulti - captures all multicast packets arriving to the port. 3. Function port - for future use, this mode is not implemented yet. Use these modes with the flow_attach and flow_detach firmware commands according to the promiscuous state of the netdevice. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index e45fc20bd01f..6f0d133cc7ad 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -542,6 +542,8 @@ struct mlx4_dev { u8 rev_id; char board_id[MLX4_BOARD_ID_LEN]; int num_vfs; + u64 regid_promisc_array[MLX4_MAX_PORTS + 1]; + u64 regid_allmulti_array[MLX4_MAX_PORTS + 1]; }; struct mlx4_init_port_param { @@ -681,6 +683,7 @@ enum mlx4_net_trans_rule_id { enum mlx4_net_trans_promisc_mode { MLX4_FS_PROMISC_NONE = 0, MLX4_FS_PROMISC_UPLINK, + /* For future use. Not implemented yet */ MLX4_FS_PROMISC_FUNCTION_PORT, MLX4_FS_PROMISC_ALL_MULTI, }; @@ -744,6 +747,10 @@ struct mlx4_net_trans_rule { u32 qpn; }; +int mlx4_flow_steer_promisc_add(struct mlx4_dev *dev, u8 port, u32 qpn, + enum mlx4_net_trans_promisc_mode mode); +int mlx4_flow_steer_promisc_remove(struct mlx4_dev *dev, u8 port, + enum mlx4_net_trans_promisc_mode mode); int mlx4_multicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_multicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); -- cgit v1.2.3 From dae8a969d512ee15e08fbec7837b9dab1777896d Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Mon, 25 Jun 2012 10:34:36 +0200 Subject: mfd: Add Maxim 77686 driver This patch is device driver for MAX77686 chip. MAX77686 is PMIC and includes regulator and rtc on it. This driver is core of MAX77686 chip, so provides common support for accessing on-chip devices. It uses irq_domain to manage irq and regmap to read/write data to its register with i2c bus. Signed-off-by: Chiwoong Byun Signed-off-by: Jonghwa Lee Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/max77686-private.h | 247 +++++++++++++++++++++++++++++++++++ include/linux/mfd/max77686.h | 117 +++++++++++++++++ 2 files changed, 364 insertions(+) create mode 100644 include/linux/mfd/max77686-private.h create mode 100644 include/linux/mfd/max77686.h (limited to 'include/linux') diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h new file mode 100644 index 000000000000..962f65e72b71 --- /dev/null +++ b/include/linux/mfd/max77686-private.h @@ -0,0 +1,247 @@ +/* + * max77686.h - Voltage regulator driver for the Maxim 77686 + * + * Copyright (C) 2012 Samsung Electrnoics + * Chiwoong Byun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_MAX77686_PRIV_H +#define __LINUX_MFD_MAX77686_PRIV_H + +#include +#include +#include + +#define MAX77686_REG_INVALID (0xff) + +enum max77686_pmic_reg { + MAX77686_REG_DEVICE_ID = 0x00, + MAX77686_REG_INTSRC = 0x01, + MAX77686_REG_INT1 = 0x02, + MAX77686_REG_INT2 = 0x03, + + MAX77686_REG_INT1MSK = 0x04, + MAX77686_REG_INT2MSK = 0x05, + + MAX77686_REG_STATUS1 = 0x06, + MAX77686_REG_STATUS2 = 0x07, + + MAX77686_REG_PWRON = 0x08, + MAX77686_REG_ONOFF_DELAY = 0x09, + MAX77686_REG_MRSTB = 0x0A, + /* Reserved: 0x0B-0x0F */ + + MAX77686_REG_BUCK1CTRL = 0x10, + MAX77686_REG_BUCK1OUT = 0x11, + MAX77686_REG_BUCK2CTRL1 = 0x12, + MAX77686_REG_BUCK234FREQ = 0x13, + MAX77686_REG_BUCK2DVS1 = 0x14, + MAX77686_REG_BUCK2DVS2 = 0x15, + MAX77686_REG_BUCK2DVS3 = 0x16, + MAX77686_REG_BUCK2DVS4 = 0x17, + MAX77686_REG_BUCK2DVS5 = 0x18, + MAX77686_REG_BUCK2DVS6 = 0x19, + MAX77686_REG_BUCK2DVS7 = 0x1A, + MAX77686_REG_BUCK2DVS8 = 0x1B, + MAX77686_REG_BUCK3CTRL1 = 0x1C, + /* Reserved: 0x1D */ + MAX77686_REG_BUCK3DVS1 = 0x1E, + MAX77686_REG_BUCK3DVS2 = 0x1F, + MAX77686_REG_BUCK3DVS3 = 0x20, + MAX77686_REG_BUCK3DVS4 = 0x21, + MAX77686_REG_BUCK3DVS5 = 0x22, + MAX77686_REG_BUCK3DVS6 = 0x23, + MAX77686_REG_BUCK3DVS7 = 0x24, + MAX77686_REG_BUCK3DVS8 = 0x25, + MAX77686_REG_BUCK4CTRL1 = 0x26, + /* Reserved: 0x27 */ + MAX77686_REG_BUCK4DVS1 = 0x28, + MAX77686_REG_BUCK4DVS2 = 0x29, + MAX77686_REG_BUCK4DVS3 = 0x2A, + MAX77686_REG_BUCK4DVS4 = 0x2B, + MAX77686_REG_BUCK4DVS5 = 0x2C, + MAX77686_REG_BUCK4DVS6 = 0x2D, + MAX77686_REG_BUCK4DVS7 = 0x2E, + MAX77686_REG_BUCK4DVS8 = 0x2F, + MAX77686_REG_BUCK5CTRL = 0x30, + MAX77686_REG_BUCK5OUT = 0x31, + MAX77686_REG_BUCK6CTRL = 0x32, + MAX77686_REG_BUCK6OUT = 0x33, + MAX77686_REG_BUCK7CTRL = 0x34, + MAX77686_REG_BUCK7OUT = 0x35, + MAX77686_REG_BUCK8CTRL = 0x36, + MAX77686_REG_BUCK8OUT = 0x37, + MAX77686_REG_BUCK9CTRL = 0x38, + MAX77686_REG_BUCK9OUT = 0x39, + /* Reserved: 0x3A-0x3F */ + + MAX77686_REG_LDO1CTRL1 = 0x40, + MAX77686_REG_LDO2CTRL1 = 0x41, + MAX77686_REG_LDO3CTRL1 = 0x42, + MAX77686_REG_LDO4CTRL1 = 0x43, + MAX77686_REG_LDO5CTRL1 = 0x44, + MAX77686_REG_LDO6CTRL1 = 0x45, + MAX77686_REG_LDO7CTRL1 = 0x46, + MAX77686_REG_LDO8CTRL1 = 0x47, + MAX77686_REG_LDO9CTRL1 = 0x48, + MAX77686_REG_LDO10CTRL1 = 0x49, + MAX77686_REG_LDO11CTRL1 = 0x4A, + MAX77686_REG_LDO12CTRL1 = 0x4B, + MAX77686_REG_LDO13CTRL1 = 0x4C, + MAX77686_REG_LDO14CTRL1 = 0x4D, + MAX77686_REG_LDO15CTRL1 = 0x4E, + MAX77686_REG_LDO16CTRL1 = 0x4F, + MAX77686_REG_LDO17CTRL1 = 0x50, + MAX77686_REG_LDO18CTRL1 = 0x51, + MAX77686_REG_LDO19CTRL1 = 0x52, + MAX77686_REG_LDO20CTRL1 = 0x53, + MAX77686_REG_LDO21CTRL1 = 0x54, + MAX77686_REG_LDO22CTRL1 = 0x55, + MAX77686_REG_LDO23CTRL1 = 0x56, + MAX77686_REG_LDO24CTRL1 = 0x57, + MAX77686_REG_LDO25CTRL1 = 0x58, + MAX77686_REG_LDO26CTRL1 = 0x59, + /* Reserved: 0x5A-0x5F */ + MAX77686_REG_LDO1CTRL2 = 0x60, + MAX77686_REG_LDO2CTRL2 = 0x61, + MAX77686_REG_LDO3CTRL2 = 0x62, + MAX77686_REG_LDO4CTRL2 = 0x63, + MAX77686_REG_LDO5CTRL2 = 0x64, + MAX77686_REG_LDO6CTRL2 = 0x65, + MAX77686_REG_LDO7CTRL2 = 0x66, + MAX77686_REG_LDO8CTRL2 = 0x67, + MAX77686_REG_LDO9CTRL2 = 0x68, + MAX77686_REG_LDO10CTRL2 = 0x69, + MAX77686_REG_LDO11CTRL2 = 0x6A, + MAX77686_REG_LDO12CTRL2 = 0x6B, + MAX77686_REG_LDO13CTRL2 = 0x6C, + MAX77686_REG_LDO14CTRL2 = 0x6D, + MAX77686_REG_LDO15CTRL2 = 0x6E, + MAX77686_REG_LDO16CTRL2 = 0x6F, + MAX77686_REG_LDO17CTRL2 = 0x70, + MAX77686_REG_LDO18CTRL2 = 0x71, + MAX77686_REG_LDO19CTRL2 = 0x72, + MAX77686_REG_LDO20CTRL2 = 0x73, + MAX77686_REG_LDO21CTRL2 = 0x74, + MAX77686_REG_LDO22CTRL2 = 0x75, + MAX77686_REG_LDO23CTRL2 = 0x76, + MAX77686_REG_LDO24CTRL2 = 0x77, + MAX77686_REG_LDO25CTRL2 = 0x78, + MAX77686_REG_LDO26CTRL2 = 0x79, + /* Reserved: 0x7A-0x7D */ + + MAX77686_REG_BBAT_CHG = 0x7E, + MAX77686_REG_32KHZ = 0x7F, + + MAX77686_REG_PMIC_END = 0x80, +}; + +enum max77686_rtc_reg { + MAX77686_RTC_INT = 0x00, + MAX77686_RTC_INTM = 0x01, + MAX77686_RTC_CONTROLM = 0x02, + MAX77686_RTC_CONTROL = 0x03, + MAX77686_RTC_UPDATE0 = 0x04, + /* Reserved: 0x5 */ + MAX77686_WTSR_SMPL_CNTL = 0x06, + MAX77686_RTC_SEC = 0x07, + MAX77686_RTC_MIN = 0x08, + MAX77686_RTC_HOUR = 0x09, + MAX77686_RTC_WEEKDAY = 0x0A, + MAX77686_RTC_MONTH = 0x0B, + MAX77686_RTC_YEAR = 0x0C, + MAX77686_RTC_DATE = 0x0D, + MAX77686_ALARM1_SEC = 0x0E, + MAX77686_ALARM1_MIN = 0x0F, + MAX77686_ALARM1_HOUR = 0x10, + MAX77686_ALARM1_WEEKDAY = 0x11, + MAX77686_ALARM1_MONTH = 0x12, + MAX77686_ALARM1_YEAR = 0x13, + MAX77686_ALARM1_DATE = 0x14, + MAX77686_ALARM2_SEC = 0x15, + MAX77686_ALARM2_MIN = 0x16, + MAX77686_ALARM2_HOUR = 0x17, + MAX77686_ALARM2_WEEKDAY = 0x18, + MAX77686_ALARM2_MONTH = 0x19, + MAX77686_ALARM2_YEAR = 0x1A, + MAX77686_ALARM2_DATE = 0x1B, +}; + +#define MAX77686_IRQSRC_PMIC (0) +#define MAX77686_IRQSRC_RTC (1 << 0) + +enum max77686_irq_source { + PMIC_INT1 = 0, + PMIC_INT2, + RTC_INT, + + MAX77686_IRQ_GROUP_NR, +}; + +enum max77686_irq { + MAX77686_PMICIRQ_PWRONF, + MAX77686_PMICIRQ_PWRONR, + MAX77686_PMICIRQ_JIGONBF, + MAX77686_PMICIRQ_JIGONBR, + MAX77686_PMICIRQ_ACOKBF, + MAX77686_PMICIRQ_ACOKBR, + MAX77686_PMICIRQ_ONKEY1S, + MAX77686_PMICIRQ_MRSTB, + + MAX77686_PMICIRQ_140C, + MAX77686_PMICIRQ_120C, + + MAX77686_RTCIRQ_RTC60S, + MAX77686_RTCIRQ_RTCA1, + MAX77686_RTCIRQ_RTCA2, + MAX77686_RTCIRQ_SMPL, + MAX77686_RTCIRQ_RTC1S, + MAX77686_RTCIRQ_WTSR, + + MAX77686_IRQ_NR, +}; + +struct max77686_dev { + struct device *dev; + struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ + struct i2c_client *rtc; /* slave addr 0x0c */ + struct mutex iolock; + + int type; + + struct regmap *regmap; /* regmap for mfd */ + struct regmap *rtc_regmap; /* regmap for rtc */ + + struct irq_domain *irq_domain; + + int irq; + int irq_gpio; + bool wakeup; + struct mutex irqlock; + int irq_masks_cur[MAX77686_IRQ_GROUP_NR]; + int irq_masks_cache[MAX77686_IRQ_GROUP_NR]; +}; + +enum max77686_types { + TYPE_MAX77686, +}; + +extern int max77686_irq_init(struct max77686_dev *max77686); +extern void max77686_irq_exit(struct max77686_dev *max77686); +extern int max77686_irq_resume(struct max77686_dev *max77686); + +#endif /* __LINUX_MFD_MAX77686_PRIV_H */ diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h new file mode 100644 index 000000000000..fcf312678cac --- /dev/null +++ b/include/linux/mfd/max77686.h @@ -0,0 +1,117 @@ +/* + * max77686.h - Driver for the Maxim 77686 + * + * Copyright (C) 2012 Samsung Electrnoics + * Chiwoong Byun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8997.h + * + * MAX77686 has PMIC, RTC devices. + * The devices share the same I2C bus and included in + * this mfd driver. + */ + +#ifndef __LINUX_MFD_MAX77686_H +#define __LINUX_MFD_MAX77686_H + +#include + +/* MAX77686 regulator IDs */ +enum max77686_regulators { + MAX77686_LDO1 = 0, + MAX77686_LDO2, + MAX77686_LDO3, + MAX77686_LDO4, + MAX77686_LDO5, + MAX77686_LDO6, + MAX77686_LDO7, + MAX77686_LDO8, + MAX77686_LDO9, + MAX77686_LDO10, + MAX77686_LDO11, + MAX77686_LDO12, + MAX77686_LDO13, + MAX77686_LDO14, + MAX77686_LDO15, + MAX77686_LDO16, + MAX77686_LDO17, + MAX77686_LDO18, + MAX77686_LDO19, + MAX77686_LDO20, + MAX77686_LDO21, + MAX77686_LDO22, + MAX77686_LDO23, + MAX77686_LDO24, + MAX77686_LDO25, + MAX77686_LDO26, + MAX77686_BUCK1, + MAX77686_BUCK2, + MAX77686_BUCK3, + MAX77686_BUCK4, + MAX77686_BUCK5, + MAX77686_BUCK6, + MAX77686_BUCK7, + MAX77686_BUCK8, + MAX77686_BUCK9, + MAX77686_EN32KHZ_AP, + MAX77686_EN32KHZ_CP, + MAX77686_P32KH, + + MAX77686_REG_MAX, +}; + +struct max77686_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +enum max77686_opmode { + MAX77686_OPMODE_NORMAL, + MAX77686_OPMODE_LP, + MAX77686_OPMODE_STANDBY, +}; + +struct max77686_opmode_data { + int id; + int mode; +}; + +struct max77686_platform_data { + /* IRQ */ + int irq_gpio; + int ono; + int wakeup; + + /* ---- PMIC ---- */ + struct max77686_regulator_data *regulators; + int num_regulators; + + struct max77686_opmode_data *opmode_data; + + /* + * GPIO-DVS feature is not enabled with the current version of + * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default + * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW. + */ + int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */ + int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */ + unsigned int buck2_voltage[8]; /* buckx_voltage in uV */ + unsigned int buck3_voltage[8]; + unsigned int buck4_voltage[8]; +}; + +#endif /* __LINUX_MFD_MAX77686_H */ -- cgit v1.2.3 From a7cc37a49876319b2f848290eefe3388dd82286b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 24 May 2012 16:57:46 +0800 Subject: mfd: Remove unused max77693 iolock mutex Now this driver is using regmap APIs, the iolock mutex is not used and can be removed. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- include/linux/mfd/max77693-private.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 68263c5fa53c..1eeae5c07915 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -190,7 +190,6 @@ struct max77693_dev { struct i2c_client *i2c; /* 0xCC , PMIC, Charger, Flash LED */ struct i2c_client *muic; /* 0x4A , MUIC */ struct i2c_client *haptic; /* 0x90 , Haptic */ - struct mutex iolock; int type; -- cgit v1.2.3 From 06e589efa5b75e6a38a8e8b9c6cd774b5f679cdc Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 20 Jun 2012 13:56:37 +0100 Subject: mfd: Add IRQ domain support for the AB8500 As the AB8500 is an IRQ controller in its own right, here we provide the AB8500 driver with IRQ domain support. This is required if we wish to reference any of its IRQs from a platform's Device Tree. Cc: Naga Radheshy Cc: Mattias Wallin Cc: Daniel Willerud Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- include/linux/mfd/abx500/ab8500.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 91dd3ef63e99..4ae2cd9584fb 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -9,6 +9,7 @@ #include #include +#include struct device; @@ -227,6 +228,7 @@ enum ab8500_version { * @irq_lock: genirq bus lock * @transfer_ongoing: 0 if no transfer ongoing * @irq: irq line + * @irq_domain: irq domain * @version: chip version id (e.g. ab8500 or ab9540) * @chip_id: chip revision id * @write: register write @@ -247,6 +249,7 @@ struct ab8500 { atomic_t transfer_ongoing; int irq_base; int irq; + struct irq_domain *domain; enum ab8500_version version; u8 chip_id; @@ -336,4 +339,6 @@ static inline int is_ab8500_2p0(struct ab8500 *ab) return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0)); } +int ab8500_irq_get_virq(struct ab8500 *ab8500, int irq); + #endif /* MFD_AB8500_H */ -- cgit v1.2.3 From c94bb233a9fee3314dc5d9c7de9fa702e91283f2 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 29 Jun 2012 19:01:03 +0200 Subject: mfd: Make MFD core code Device Tree and IRQ domain aware During Device Tree enablement of the ab8500 and db8500-prcmu drivers, a decision was made to omit registration through the MFD API and use Device Tree directly. However, because MFD devices have a different address space and the ab8500 and db8500 both use I2C to communicate, this causes issues with address translation during execution of of_platform_populate(). So the solution is to make the MFD core aware of Device Tree and have it assign the correct node pointers instead. To make this work the MFD core also needs to be awere of IRQ domains, as Device Tree insists on IRQ domain compatibility. So, instead of providing an irq-base via platform code, in the DT case we simply look up the IRQ domain and map to the correct virtual IRQ. Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 4e76163dd862..99b7eb1961b6 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -36,6 +36,7 @@ struct mfd_cell { /* platform data passed to the sub devices drivers */ void *platform_data; size_t pdata_size; + const char *of_compatible; /* * These resources can be specified relative to the parent device. -- cgit v1.2.3 From b0ab907d325f99054eb2700a8f8c50776ebfeaf9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 1 Jun 2012 16:33:19 +0100 Subject: mfd: Support for user defined wm8994 irq flags Signed-off-by: Chris Rattray Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8994/pdata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 893267bb6229..f0361c031927 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -141,6 +141,7 @@ struct wm8994_pdata { struct wm8994_ldo_pdata ldo[WM8994_NUM_LDO]; int irq_base; /** Base IRQ number for WM8994, required for IRQs */ + unsigned long irq_flags; /** user irq flags */ int num_drc_cfgs; struct wm8994_drc_cfg *drc_cfgs; -- cgit v1.2.3 From 52b461b86a9f6c7a86bdcb858e1bbef089fbe6a0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 3 Jun 2012 13:37:22 +0100 Subject: mfd: Add regmap cache support for wm8350 Use the most simple possible transformation on the existing code so keep the table sitting around, further patches in this series will delete the existing cache code - the main purpose of this patch is to ensure that we always have a cache for bisection. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8350/core.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 9192b6404a73..cba9bc8f947b 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -66,6 +67,9 @@ #define WM8350_MAX_REGISTER 0xFF +#define WM8350_UNLOCK_KEY 0x0013 +#define WM8350_LOCK_KEY 0x0000 + /* * Field Definitions. */ @@ -582,6 +586,7 @@ #define WM8350_NUM_IRQ_REGS 7 +extern const struct regmap_config wm8350_regmap; struct wm8350_reg_access { u16 readable; /* Mask of readable bits */ u16 writable; /* Mask of writable bits */ @@ -602,7 +607,6 @@ extern const u16 wm8352_mode2_defaults[]; extern const u16 wm8352_mode3_defaults[]; struct wm8350; -struct regmap; struct wm8350_hwmon { struct platform_device *pdev; @@ -615,6 +619,7 @@ struct wm8350 { /* device IO */ struct regmap *regmap; u16 *reg_cache; + bool unlocked; struct mutex auxadc_mutex; struct completion auxadc_done; -- cgit v1.2.3 From 19d57ed5a308472a02e773f33c03ad4cb2ec6a9d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 3 Jun 2012 13:37:24 +0100 Subject: mfd: Remove custom wm8350 cache implementation Since none of the users now reference the cache directly we can happily remove the custom cache code and rely on the regmap cache. For simplicity we don't bother with the register defaults tables but instead read the defaults from the device - regmap is capable of doing this, unlike our old cache infrastructure. This saves a lot of code and allows us to cache the device revision information too. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8350/core.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index cba9bc8f947b..509481d9cf19 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -587,24 +587,6 @@ #define WM8350_NUM_IRQ_REGS 7 extern const struct regmap_config wm8350_regmap; -struct wm8350_reg_access { - u16 readable; /* Mask of readable bits */ - u16 writable; /* Mask of writable bits */ - u16 vol; /* Mask of volatile bits */ -}; -extern const struct wm8350_reg_access wm8350_reg_io_map[]; -extern const u16 wm8350_mode0_defaults[]; -extern const u16 wm8350_mode1_defaults[]; -extern const u16 wm8350_mode2_defaults[]; -extern const u16 wm8350_mode3_defaults[]; -extern const u16 wm8351_mode0_defaults[]; -extern const u16 wm8351_mode1_defaults[]; -extern const u16 wm8351_mode2_defaults[]; -extern const u16 wm8351_mode3_defaults[]; -extern const u16 wm8352_mode0_defaults[]; -extern const u16 wm8352_mode1_defaults[]; -extern const u16 wm8352_mode2_defaults[]; -extern const u16 wm8352_mode3_defaults[]; struct wm8350; @@ -618,7 +600,6 @@ struct wm8350 { /* device IO */ struct regmap *regmap; - u16 *reg_cache; bool unlocked; struct mutex auxadc_mutex; -- cgit v1.2.3 From 5261e101198e7ef31a60d3aa97815a49c8b8fa20 Mon Sep 17 00:00:00 2001 From: Arun Murthy Date: Mon, 21 May 2012 14:28:21 +0530 Subject: mfd: Update db8500-prmcu hostport_access enable Force the Modem wakeup by asserting the CaWakeReq signal before the hostaccess_req/ack ping-pong sequence. The Awake_req signal is de-asserted asserted at the same time than the hostaccess_req. Return error on failure case so that the client using this can take appropiate steps. Signed-off-by: Arun Murthy Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/db8500-prcmu.h | 7 +++++-- include/linux/mfd/dbx500-prcmu.h | 7 +++++-- 2 files changed, 10 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index b3a43b1263fe..b82f6ee66a0b 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -530,7 +530,7 @@ int db8500_prcmu_stop_temp_sense(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -void prcmu_ac_wake_req(void); +int prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); void db8500_prcmu_modem_reset(void); @@ -680,7 +680,10 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) return -ENOSYS; } -static inline void prcmu_ac_wake_req(void) {} +static inline int prcmu_ac_wake_req(void) +{ + return 0; +} static inline void prcmu_ac_sleep_req(void) {} diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 5a13f93d8f1c..5b90e94399e1 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -345,7 +345,7 @@ static inline u16 prcmu_get_reset_code(void) return db8500_prcmu_get_reset_code(); } -void prcmu_ac_wake_req(void); +int prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); static inline void prcmu_modem_reset(void) { @@ -533,7 +533,10 @@ static inline u16 prcmu_get_reset_code(void) return 0; } -static inline void prcmu_ac_wake_req(void) {} +static inline int prcmu_ac_wake_req(void) +{ + return 0; +} static inline void prcmu_ac_sleep_req(void) {} -- cgit v1.2.3 From 2968ab133ec790134d4347aa4264c2eb064b42e7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 2 Jul 2012 10:50:19 +0100 Subject: mfd: Attaching a node to new 'struct mfd_cell' of_compatible variable Applying a succinct description to the of_compatible variable recently added to the mfd_cell struct. Also link to the documentation page where more information can be found about compatible properties. Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 99b7eb1961b6..3a8435a8058f 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -36,6 +36,10 @@ struct mfd_cell { /* platform data passed to the sub devices drivers */ void *platform_data; size_t pdata_size; + /* + * Device Tree compatible string + * See: Documentation/devicetree/usage-model.txt Chapter 2.2 for details + */ const char *of_compatible; /* -- cgit v1.2.3 From b41511f713ccaef666e450fae8cb18909897fe4e Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Mon, 2 Jul 2012 09:02:55 +0900 Subject: mfd: Add irq domain support for max8997 interrupts Add irq domain support for max8997 interrupts. The reverse mapping method used is linear mapping since the sub-drivers of max8997 such as regulator and charger drivers can use the max8997 irq_domain to get the linux irq number for max8997 interrupts. All uses of irq_base in platform data and max8997 driver private data are removed. Reviwed-by: Mark Brown Acked-by: MyungJoo Ham Acked-by: Grant Likely Signed-off-by: Thomas Abraham Signed-off-by: Chanwoo Choi Signed-off-by: Kyungmin Park Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997-private.h | 4 +++- include/linux/mfd/max8997.h | 1 - 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 3f4deb62d6b0..830152cfae33 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -23,6 +23,8 @@ #define __LINUX_MFD_MAX8997_PRIV_H #include +#include +#include #define MAX8997_REG_INVALID (0xff) @@ -325,7 +327,7 @@ struct max8997_dev { int irq; int ono; - int irq_base; + struct irq_domain *irq_domain; struct mutex irqlock; int irq_masks_cur[MAX8997_IRQ_GROUP_NR]; int irq_masks_cache[MAX8997_IRQ_GROUP_NR]; diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index b40c08cd30bc..328d8e24b533 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -181,7 +181,6 @@ struct max8997_led_platform_data { struct max8997_platform_data { /* IRQ */ - int irq_base; int ono; int wakeup; -- cgit v1.2.3 From 712db99df155eeef7bbab8677d8a02d0eff50d11 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 28 Jun 2012 12:20:21 +0200 Subject: mfd: Add support for enabling tps65910 external 32-kHz oscillator Add flag to platform data to enable external 32-kHz crystal oscillator (or square wave) input. The tps6591x can use either an internal 32-kHz RC oscillator or an external crystal (or square wave) to generate the 32-kHz clock. The default setting depends on the selected boot mode. In boot mode 00 the internal RC oscillator is used at power-on, but the external crystal oscillator (or square wave) can be enabled by clearing the ck32k_ctrl flag in the device control register. Note that there is no way to switch from the external crystal oscillator to the internal RC oscillator. Signed-off-by: Johan Hovold Signed-off-by: Samuel Ortiz --- include/linux/mfd/tps65910.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index dd8dc0a6c462..a989d2b066be 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -807,6 +807,7 @@ struct tps65910_board { int irq_base; int vmbch_threshold; int vmbch2_threshold; + bool en_ck32k_xtal; bool en_dev_slp; struct tps65910_sleep_keepon_data *slp_keepon; bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; -- cgit v1.2.3 From 2573f6d36e73e080fc1d9d9ac7dfaf2253a61434 Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Fri, 6 Jul 2012 10:59:58 +0800 Subject: mfd: Add pre-regulator device for 88pm860x Pre-regulator of 88pm8606 is mainly for support charging based on vbus, it needs to be enabled for charging battery, and will be disabled in some exception condition like over-temp. Add the pre-regulator device init data and resource for mfd subdev. Signed-off-by: Jett.Zhou Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm860x.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 84d071ade1d8..7b24943779fa 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -136,6 +136,7 @@ enum { PM8607_ID_LDO13, PM8607_ID_LDO14, PM8607_ID_LDO15, + PM8606_ID_PREG, PM8607_ID_RG_MAX, }; -- cgit v1.2.3 From b8748096111b483de8a544cc220510dff17bbff9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 6 Jul 2012 15:32:20 +0800 Subject: mfd: Remove unused max77686 iolock mutex Now this driver is using regmap API, the iolock mutex is not used and can be removed. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- include/linux/mfd/max77686-private.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index 962f65e72b71..d327d4971e4f 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -219,7 +219,6 @@ struct max77686_dev { struct device *dev; struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ struct i2c_client *rtc; /* slave addr 0x0c */ - struct mutex iolock; int type; -- cgit v1.2.3 From 59db96913c9d94fe74002df494eb80e4a5ca4087 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 9 Jul 2012 00:31:36 +0200 Subject: mfd: Move arizona digital core supply management to the regulator API Rather than open coding the enable GPIO control in the MFD core use the API to push the management on to the regulator driver. The immediate advantage is slight for most systems but this will in future allow device configurations where an external regulator is used for DCVDD. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/arizona/core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index 0157d845c2ff..3ef32b4c1136 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -77,6 +77,7 @@ struct arizona { int num_core_supplies; struct regulator_bulk_data core_supplies[ARIZONA_MAX_CORE_SUPPLIES]; + struct regulator *dcvdd; struct arizona_pdata pdata; -- cgit v1.2.3 From de2233365d5abc94993378330768786de2c606f6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 5 Jul 2012 20:35:28 +0100 Subject: mfd: Add more arizona register definitions These registers will be used in future devices. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/arizona/registers.h | 163 ++++++++++++++++++++++++++++++++++ 1 file changed, 163 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 989c47d681e0..8f49106d7bda 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -20,6 +20,9 @@ #define ARIZONA_DEVICE_REVISION 0x01 #define ARIZONA_CTRL_IF_SPI_CFG_1 0x08 #define ARIZONA_CTRL_IF_I2C1_CFG_1 0x09 +#define ARIZONA_CTRL_IF_I2C2_CFG_1 0x0A +#define ARIZONA_CTRL_IF_I2C1_CFG_2 0x0B +#define ARIZONA_CTRL_IF_I2C2_CFG_2 0x0C #define ARIZONA_CTRL_IF_STATUS_1 0x0D #define ARIZONA_WRITE_SEQUENCER_CTRL_0 0x16 #define ARIZONA_WRITE_SEQUENCER_CTRL_1 0x17 @@ -80,6 +83,7 @@ #define ARIZONA_FLL1_CONTROL_5 0x175 #define ARIZONA_FLL1_CONTROL_6 0x176 #define ARIZONA_FLL1_LOOP_FILTER_TEST_1 0x177 +#define ARIZONA_FLL1_NCO_TEST_0 0x178 #define ARIZONA_FLL1_SYNCHRONISER_1 0x181 #define ARIZONA_FLL1_SYNCHRONISER_2 0x182 #define ARIZONA_FLL1_SYNCHRONISER_3 0x183 @@ -95,6 +99,7 @@ #define ARIZONA_FLL2_CONTROL_5 0x195 #define ARIZONA_FLL2_CONTROL_6 0x196 #define ARIZONA_FLL2_LOOP_FILTER_TEST_1 0x197 +#define ARIZONA_FLL2_NCO_TEST_0 0x198 #define ARIZONA_FLL2_SYNCHRONISER_1 0x1A1 #define ARIZONA_FLL2_SYNCHRONISER_2 0x1A2 #define ARIZONA_FLL2_SYNCHRONISER_3 0x1A3 @@ -119,6 +124,7 @@ #define ARIZONA_ISOLATION_CONTROL 0x2CB #define ARIZONA_JACK_DETECT_ANALOGUE 0x2D3 #define ARIZONA_INPUT_ENABLES 0x300 +#define ARIZONA_INPUT_ENABLES_STATUS 0x301 #define ARIZONA_INPUT_RATE 0x308 #define ARIZONA_INPUT_VOLUME_RAMP 0x309 #define ARIZONA_IN1L_CONTROL 0x310 @@ -139,8 +145,14 @@ #define ARIZONA_IN3R_CONTROL 0x324 #define ARIZONA_ADC_DIGITAL_VOLUME_3R 0x325 #define ARIZONA_DMIC3R_CONTROL 0x326 +#define ARIZONA_IN4_CONTROL 0x328 +#define ARIZONA_ADC_DIGITAL_VOLUME_4L 0x329 +#define ARIZONA_DMIC4L_CONTROL 0x32A +#define ARIZONA_ADC_DIGITAL_VOLUME_4R 0x32D +#define ARIZONA_DMIC4R_CONTROL 0x32E #define ARIZONA_OUTPUT_ENABLES_1 0x400 #define ARIZONA_OUTPUT_STATUS_1 0x401 +#define ARIZONA_RAW_OUTPUT_STATUS_1 0x406 #define ARIZONA_OUTPUT_RATE_1 0x408 #define ARIZONA_OUTPUT_VOLUME_RAMP 0x409 #define ARIZONA_OUTPUT_PATH_CONFIG_1L 0x410 @@ -166,6 +178,7 @@ #define ARIZONA_OUTPUT_PATH_CONFIG_3R 0x424 #define ARIZONA_DAC_DIGITAL_VOLUME_3R 0x425 #define ARIZONA_DAC_VOLUME_LIMIT_3R 0x426 +#define ARIZONA_NOISE_GATE_SELECT_3R 0x427 #define ARIZONA_OUTPUT_PATH_CONFIG_4L 0x428 #define ARIZONA_DAC_DIGITAL_VOLUME_4L 0x429 #define ARIZONA_OUT_VOLUME_4L 0x42A @@ -182,10 +195,20 @@ #define ARIZONA_DAC_DIGITAL_VOLUME_5R 0x435 #define ARIZONA_DAC_VOLUME_LIMIT_5R 0x436 #define ARIZONA_NOISE_GATE_SELECT_5R 0x437 +#define ARIZONA_OUTPUT_PATH_CONFIG_6L 0x438 +#define ARIZONA_DAC_DIGITAL_VOLUME_6L 0x439 +#define ARIZONA_DAC_VOLUME_LIMIT_6L 0x43A +#define ARIZONA_NOISE_GATE_SELECT_6L 0x43B +#define ARIZONA_OUTPUT_PATH_CONFIG_6R 0x43C +#define ARIZONA_DAC_DIGITAL_VOLUME_6R 0x43D +#define ARIZONA_DAC_VOLUME_LIMIT_6R 0x43E +#define ARIZONA_NOISE_GATE_SELECT_6R 0x43F #define ARIZONA_DAC_AEC_CONTROL_1 0x450 #define ARIZONA_NOISE_GATE_CONTROL 0x458 #define ARIZONA_PDM_SPK1_CTRL_1 0x490 #define ARIZONA_PDM_SPK1_CTRL_2 0x491 +#define ARIZONA_PDM_SPK2_CTRL_1 0x492 +#define ARIZONA_PDM_SPK2_CTRL_2 0x493 #define ARIZONA_DAC_COMP_1 0x4DC #define ARIZONA_DAC_COMP_2 0x4DD #define ARIZONA_DAC_COMP_3 0x4DE @@ -335,6 +358,14 @@ #define ARIZONA_OUT3LMIX_INPUT_3_VOLUME 0x6A5 #define ARIZONA_OUT3LMIX_INPUT_4_SOURCE 0x6A6 #define ARIZONA_OUT3LMIX_INPUT_4_VOLUME 0x6A7 +#define ARIZONA_OUT3RMIX_INPUT_1_SOURCE 0x6A8 +#define ARIZONA_OUT3RMIX_INPUT_1_VOLUME 0x6A9 +#define ARIZONA_OUT3RMIX_INPUT_2_SOURCE 0x6AA +#define ARIZONA_OUT3RMIX_INPUT_2_VOLUME 0x6AB +#define ARIZONA_OUT3RMIX_INPUT_3_SOURCE 0x6AC +#define ARIZONA_OUT3RMIX_INPUT_3_VOLUME 0x6AD +#define ARIZONA_OUT3RMIX_INPUT_4_SOURCE 0x6AE +#define ARIZONA_OUT3RMIX_INPUT_4_VOLUME 0x6AF #define ARIZONA_OUT4LMIX_INPUT_1_SOURCE 0x6B0 #define ARIZONA_OUT4LMIX_INPUT_1_VOLUME 0x6B1 #define ARIZONA_OUT4LMIX_INPUT_2_SOURCE 0x6B2 @@ -367,6 +398,22 @@ #define ARIZONA_OUT5RMIX_INPUT_3_VOLUME 0x6CD #define ARIZONA_OUT5RMIX_INPUT_4_SOURCE 0x6CE #define ARIZONA_OUT5RMIX_INPUT_4_VOLUME 0x6CF +#define ARIZONA_OUT6LMIX_INPUT_1_SOURCE 0x6D0 +#define ARIZONA_OUT6LMIX_INPUT_1_VOLUME 0x6D1 +#define ARIZONA_OUT6LMIX_INPUT_2_SOURCE 0x6D2 +#define ARIZONA_OUT6LMIX_INPUT_2_VOLUME 0x6D3 +#define ARIZONA_OUT6LMIX_INPUT_3_SOURCE 0x6D4 +#define ARIZONA_OUT6LMIX_INPUT_3_VOLUME 0x6D5 +#define ARIZONA_OUT6LMIX_INPUT_4_SOURCE 0x6D6 +#define ARIZONA_OUT6LMIX_INPUT_4_VOLUME 0x6D7 +#define ARIZONA_OUT6RMIX_INPUT_1_SOURCE 0x6D8 +#define ARIZONA_OUT6RMIX_INPUT_1_VOLUME 0x6D9 +#define ARIZONA_OUT6RMIX_INPUT_2_SOURCE 0x6DA +#define ARIZONA_OUT6RMIX_INPUT_2_VOLUME 0x6DB +#define ARIZONA_OUT6RMIX_INPUT_3_SOURCE 0x6DC +#define ARIZONA_OUT6RMIX_INPUT_3_VOLUME 0x6DD +#define ARIZONA_OUT6RMIX_INPUT_4_SOURCE 0x6DE +#define ARIZONA_OUT6RMIX_INPUT_4_VOLUME 0x6DF #define ARIZONA_AIF1TX1MIX_INPUT_1_SOURCE 0x700 #define ARIZONA_AIF1TX1MIX_INPUT_1_VOLUME 0x701 #define ARIZONA_AIF1TX1MIX_INPUT_2_SOURCE 0x702 @@ -645,18 +692,106 @@ #define ARIZONA_DSP1AUX4MIX_INPUT_1_SOURCE 0x968 #define ARIZONA_DSP1AUX5MIX_INPUT_1_SOURCE 0x970 #define ARIZONA_DSP1AUX6MIX_INPUT_1_SOURCE 0x978 +#define ARIZONA_DSP2LMIX_INPUT_1_SOURCE 0x980 +#define ARIZONA_DSP2LMIX_INPUT_1_VOLUME 0x981 +#define ARIZONA_DSP2LMIX_INPUT_2_SOURCE 0x982 +#define ARIZONA_DSP2LMIX_INPUT_2_VOLUME 0x983 +#define ARIZONA_DSP2LMIX_INPUT_3_SOURCE 0x984 +#define ARIZONA_DSP2LMIX_INPUT_3_VOLUME 0x985 +#define ARIZONA_DSP2LMIX_INPUT_4_SOURCE 0x986 +#define ARIZONA_DSP2LMIX_INPUT_4_VOLUME 0x987 +#define ARIZONA_DSP2RMIX_INPUT_1_SOURCE 0x988 +#define ARIZONA_DSP2RMIX_INPUT_1_VOLUME 0x989 +#define ARIZONA_DSP2RMIX_INPUT_2_SOURCE 0x98A +#define ARIZONA_DSP2RMIX_INPUT_2_VOLUME 0x98B +#define ARIZONA_DSP2RMIX_INPUT_3_SOURCE 0x98C +#define ARIZONA_DSP2RMIX_INPUT_3_VOLUME 0x98D +#define ARIZONA_DSP2RMIX_INPUT_4_SOURCE 0x98E +#define ARIZONA_DSP2RMIX_INPUT_4_VOLUME 0x98F +#define ARIZONA_DSP2AUX1MIX_INPUT_1_SOURCE 0x990 +#define ARIZONA_DSP2AUX2MIX_INPUT_1_SOURCE 0x998 +#define ARIZONA_DSP2AUX3MIX_INPUT_1_SOURCE 0x9A0 +#define ARIZONA_DSP2AUX4MIX_INPUT_1_SOURCE 0x9A8 +#define ARIZONA_DSP2AUX5MIX_INPUT_1_SOURCE 0x9B0 +#define ARIZONA_DSP2AUX6MIX_INPUT_1_SOURCE 0x9B8 +#define ARIZONA_DSP3LMIX_INPUT_1_SOURCE 0x9C0 +#define ARIZONA_DSP3LMIX_INPUT_1_VOLUME 0x9C1 +#define ARIZONA_DSP3LMIX_INPUT_2_SOURCE 0x9C2 +#define ARIZONA_DSP3LMIX_INPUT_2_VOLUME 0x9C3 +#define ARIZONA_DSP3LMIX_INPUT_3_SOURCE 0x9C4 +#define ARIZONA_DSP3LMIX_INPUT_3_VOLUME 0x9C5 +#define ARIZONA_DSP3LMIX_INPUT_4_SOURCE 0x9C6 +#define ARIZONA_DSP3LMIX_INPUT_4_VOLUME 0x9C7 +#define ARIZONA_DSP3RMIX_INPUT_1_SOURCE 0x9C8 +#define ARIZONA_DSP3RMIX_INPUT_1_VOLUME 0x9C9 +#define ARIZONA_DSP3RMIX_INPUT_2_SOURCE 0x9CA +#define ARIZONA_DSP3RMIX_INPUT_2_VOLUME 0x9CB +#define ARIZONA_DSP3RMIX_INPUT_3_SOURCE 0x9CC +#define ARIZONA_DSP3RMIX_INPUT_3_VOLUME 0x9CD +#define ARIZONA_DSP3RMIX_INPUT_4_SOURCE 0x9CE +#define ARIZONA_DSP3RMIX_INPUT_4_VOLUME 0x9CF +#define ARIZONA_DSP3AUX1MIX_INPUT_1_SOURCE 0x9D0 +#define ARIZONA_DSP3AUX2MIX_INPUT_1_SOURCE 0x9D8 +#define ARIZONA_DSP3AUX3MIX_INPUT_1_SOURCE 0x9E0 +#define ARIZONA_DSP3AUX4MIX_INPUT_1_SOURCE 0x9E8 +#define ARIZONA_DSP3AUX5MIX_INPUT_1_SOURCE 0x9F0 +#define ARIZONA_DSP3AUX6MIX_INPUT_1_SOURCE 0x9F8 +#define ARIZONA_DSP4LMIX_INPUT_1_SOURCE 0xA00 +#define ARIZONA_DSP4LMIX_INPUT_1_VOLUME 0xA01 +#define ARIZONA_DSP4LMIX_INPUT_2_SOURCE 0xA02 +#define ARIZONA_DSP4LMIX_INPUT_2_VOLUME 0xA03 +#define ARIZONA_DSP4LMIX_INPUT_3_SOURCE 0xA04 +#define ARIZONA_DSP4LMIX_INPUT_3_VOLUME 0xA05 +#define ARIZONA_DSP4LMIX_INPUT_4_SOURCE 0xA06 +#define ARIZONA_DSP4LMIX_INPUT_4_VOLUME 0xA07 +#define ARIZONA_DSP4RMIX_INPUT_1_SOURCE 0xA08 +#define ARIZONA_DSP4RMIX_INPUT_1_VOLUME 0xA09 +#define ARIZONA_DSP4RMIX_INPUT_2_SOURCE 0xA0A +#define ARIZONA_DSP4RMIX_INPUT_2_VOLUME 0xA0B +#define ARIZONA_DSP4RMIX_INPUT_3_SOURCE 0xA0C +#define ARIZONA_DSP4RMIX_INPUT_3_VOLUME 0xA0D +#define ARIZONA_DSP4RMIX_INPUT_4_SOURCE 0xA0E +#define ARIZONA_DSP4RMIX_INPUT_4_VOLUME 0xA0F +#define ARIZONA_DSP4AUX1MIX_INPUT_1_SOURCE 0xA10 +#define ARIZONA_DSP4AUX2MIX_INPUT_1_SOURCE 0xA18 +#define ARIZONA_DSP4AUX3MIX_INPUT_1_SOURCE 0xA20 +#define ARIZONA_DSP4AUX4MIX_INPUT_1_SOURCE 0xA28 +#define ARIZONA_DSP4AUX5MIX_INPUT_1_SOURCE 0xA30 +#define ARIZONA_DSP4AUX6MIX_INPUT_1_SOURCE 0xA38 #define ARIZONA_ASRC1LMIX_INPUT_1_SOURCE 0xA80 #define ARIZONA_ASRC1RMIX_INPUT_1_SOURCE 0xA88 #define ARIZONA_ASRC2LMIX_INPUT_1_SOURCE 0xA90 #define ARIZONA_ASRC2RMIX_INPUT_1_SOURCE 0xA98 #define ARIZONA_ISRC1DEC1MIX_INPUT_1_SOURCE 0xB00 #define ARIZONA_ISRC1DEC2MIX_INPUT_1_SOURCE 0xB08 +#define ARIZONA_ISRC1DEC3MIX_INPUT_1_SOURCE 0xB10 +#define ARIZONA_ISRC1DEC4MIX_INPUT_1_SOURCE 0xB18 #define ARIZONA_ISRC1INT1MIX_INPUT_1_SOURCE 0xB20 #define ARIZONA_ISRC1INT2MIX_INPUT_1_SOURCE 0xB28 +#define ARIZONA_ISRC1INT3MIX_INPUT_1_SOURCE 0xB30 +#define ARIZONA_ISRC1INT4MIX_INPUT_1_SOURCE 0xB38 #define ARIZONA_ISRC2DEC1MIX_INPUT_1_SOURCE 0xB40 #define ARIZONA_ISRC2DEC2MIX_INPUT_1_SOURCE 0xB48 #define ARIZONA_ISRC2INT1MIX_INPUT_1_SOURCE 0xB60 #define ARIZONA_ISRC2INT2MIX_INPUT_1_SOURCE 0xB68 +#define ARIZONA_ISRC1INT3MIX_INPUT_1_SOURCE 0xB30 +#define ARIZONA_ISRC1INT4MIX_INPUT_1_SOURCE 0xB38 +#define ARIZONA_ISRC2DEC1MIX_INPUT_1_SOURCE 0xB40 +#define ARIZONA_ISRC2DEC2MIX_INPUT_1_SOURCE 0xB48 +#define ARIZONA_ISRC2DEC3MIX_INPUT_1_SOURCE 0xB50 +#define ARIZONA_ISRC2DEC4MIX_INPUT_1_SOURCE 0xB58 +#define ARIZONA_ISRC2INT1MIX_INPUT_1_SOURCE 0xB60 +#define ARIZONA_ISRC2INT2MIX_INPUT_1_SOURCE 0xB68 +#define ARIZONA_ISRC2INT3MIX_INPUT_1_SOURCE 0xB70 +#define ARIZONA_ISRC2INT4MIX_INPUT_1_SOURCE 0xB78 +#define ARIZONA_ISRC3DEC1MIX_INPUT_1_SOURCE 0xB80 +#define ARIZONA_ISRC3DEC2MIX_INPUT_1_SOURCE 0xB88 +#define ARIZONA_ISRC3DEC3MIX_INPUT_1_SOURCE 0xB90 +#define ARIZONA_ISRC3DEC4MIX_INPUT_1_SOURCE 0xB98 +#define ARIZONA_ISRC3INT1MIX_INPUT_1_SOURCE 0xBA0 +#define ARIZONA_ISRC3INT2MIX_INPUT_1_SOURCE 0xBA8 +#define ARIZONA_ISRC3INT3MIX_INPUT_1_SOURCE 0xBB0 +#define ARIZONA_ISRC3INT4MIX_INPUT_1_SOURCE 0xBB8 #define ARIZONA_GPIO1_CTRL 0xC00 #define ARIZONA_GPIO2_CTRL 0xC01 #define ARIZONA_GPIO3_CTRL 0xC02 @@ -670,6 +805,18 @@ #define ARIZONA_MISC_PAD_CTRL_4 0xC23 #define ARIZONA_MISC_PAD_CTRL_5 0xC24 #define ARIZONA_MISC_PAD_CTRL_6 0xC25 +#define ARIZONA_MISC_PAD_CTRL_7 0xC30 +#define ARIZONA_MISC_PAD_CTRL_8 0xC31 +#define ARIZONA_MISC_PAD_CTRL_9 0xC32 +#define ARIZONA_MISC_PAD_CTRL_10 0xC33 +#define ARIZONA_MISC_PAD_CTRL_11 0xC34 +#define ARIZONA_MISC_PAD_CTRL_12 0xC35 +#define ARIZONA_MISC_PAD_CTRL_13 0xC36 +#define ARIZONA_MISC_PAD_CTRL_14 0xC37 +#define ARIZONA_MISC_PAD_CTRL_15 0xC38 +#define ARIZONA_MISC_PAD_CTRL_16 0xC39 +#define ARIZONA_MISC_PAD_CTRL_17 0xC3A +#define ARIZONA_MISC_PAD_CTRL_18 0xC3B #define ARIZONA_INTERRUPT_STATUS_1 0xD00 #define ARIZONA_INTERRUPT_STATUS_2 0xD01 #define ARIZONA_INTERRUPT_STATUS_3 0xD02 @@ -813,6 +960,7 @@ #define ARIZONA_HPLPF4_1 0xECC #define ARIZONA_HPLPF4_2 0xECD #define ARIZONA_ASRC_ENABLE 0xEE0 +#define ARIZONA_ASRC_STATUS 0xEE1 #define ARIZONA_ASRC_RATE1 0xEE2 #define ARIZONA_ASRC_RATE2 0xEE3 #define ARIZONA_ISRC_1_CTRL_1 0xEF0 @@ -824,10 +972,25 @@ #define ARIZONA_ISRC_3_CTRL_1 0xEF6 #define ARIZONA_ISRC_3_CTRL_2 0xEF7 #define ARIZONA_ISRC_3_CTRL_3 0xEF8 +#define ARIZONA_CLOCK_CONTROL 0xF00 +#define ARIZONA_ANC_SRC 0xF01 +#define ARIZONA_DSP_STATUS 0xF02 #define ARIZONA_DSP1_CONTROL_1 0x1100 #define ARIZONA_DSP1_CLOCKING_1 0x1101 #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 +#define ARIZONA_DSP2_CONTROL_1 0x1200 +#define ARIZONA_DSP2_CLOCKING_1 0x1201 +#define ARIZONA_DSP2_STATUS_1 0x1204 +#define ARIZONA_DSP2_STATUS_2 0x1205 +#define ARIZONA_DSP3_CONTROL_1 0x1300 +#define ARIZONA_DSP3_CLOCKING_1 0x1301 +#define ARIZONA_DSP3_STATUS_1 0x1304 +#define ARIZONA_DSP3_STATUS_2 0x1305 +#define ARIZONA_DSP4_CONTROL_1 0x1400 +#define ARIZONA_DSP4_CLOCKING_1 0x1401 +#define ARIZONA_DSP4_STATUS_1 0x1404 +#define ARIZONA_DSP4_STATUS_2 0x1405 /* * Field Definitions. -- cgit v1.2.3 From 752a50cab600c6d46c5a1921c6a6d2fb116c8a4b Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 19 Jun 2012 11:21:33 +0300 Subject: mlx4_core: Pass an invalid PCI id number to VFs Currently, VFs have 0 in their dev->caps.function field. This is a valid pci id (usually of the PF). Instead, pass an invalid PCI id to the VF via QUERY_FW, so that if the value gets accessed in the VF driver, we'll catch the problem. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- include/linux/mlx4/device.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 6a8f002b8ed3..8eadf0f14cc5 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -534,6 +534,8 @@ struct mlx4_init_port_param { if (((dev)->caps.port_mask[port] == MLX4_PORT_TYPE_IB) || \ ((dev)->caps.flags & MLX4_DEV_CAP_FLAG_IBOE)) +#define MLX4_INVALID_SLAVE_ID 0xFF + static inline int mlx4_is_master(struct mlx4_dev *dev) { return dev->flags & MLX4_FLAG_MASTER; -- cgit v1.2.3 From d5bf9071e71a4db85a0eea6236ef94a29fc3eec9 Mon Sep 17 00:00:00 2001 From: Christian Hohnstaedt Date: Wed, 4 Jul 2012 05:44:34 +0000 Subject: phylib: Support registering a bunch of drivers If registering of one of them fails, all already registered drivers of this module will be unregistered. Use the new register/unregister functions in all drivers registering more than one driver. amd.c, realtek.c: Simplify: directly return registration result. Tested with broadcom.c All others compile-tested. Signed-off-by: Christian Hohnstaedt Signed-off-by: David S. Miller --- include/linux/phy.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index c35299e4da8e..93b3cf77f564 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -533,7 +533,9 @@ int genphy_read_status(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); void phy_driver_unregister(struct phy_driver *drv); +void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver); +int phy_drivers_register(struct phy_driver *new_driver, int n); void phy_state_machine(struct work_struct *work); void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)); -- cgit v1.2.3 From 039363f38bfe5f6281e9eae5e0518b11577d9d50 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 6 Jul 2012 15:25:10 -0500 Subject: mm, sl[aou]b: Extract common code for kmem_cache_create() Kmem_cache_create() does a variety of sanity checks but those vary depending on the allocator. Use the strictest tests and put them into a slab_common file. Make the tests conditional on CONFIG_DEBUG_VM. This patch has the effect of adding sanity checks for SLUB and SLOB under CONFIG_DEBUG_VM and removes the checks in SLAB for !CONFIG_DEBUG_VM. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index 0dd2dfa7beca..0cb7c7eb0416 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -130,6 +130,10 @@ int kmem_cache_shrink(struct kmem_cache *); void kmem_cache_free(struct kmem_cache *, void *); unsigned int kmem_cache_size(struct kmem_cache *); +/* Slab internal function */ +struct kmem_cache *__kmem_cache_create(const char *, size_t, size_t, + unsigned long, + void (*)(void *)); /* * Please use this macro to create slab caches. Simply specify the * name of the structure and maybe some flags that are listed above. -- cgit v1.2.3 From 97d06609158e61f6bdf538c4a6788e2de492236f Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 6 Jul 2012 15:25:11 -0500 Subject: mm, sl[aou]b: Common definition for boot state of the slab allocators All allocators have some sort of support for the bootstrap status. Setup a common definition for the boot states and make all slab allocators use that definition. Reviewed-by: Glauber Costa Reviewed-by: Joonsoo Kim Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index 0cb7c7eb0416..0dd2dfa7beca 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -130,10 +130,6 @@ int kmem_cache_shrink(struct kmem_cache *); void kmem_cache_free(struct kmem_cache *, void *); unsigned int kmem_cache_size(struct kmem_cache *); -/* Slab internal function */ -struct kmem_cache *__kmem_cache_create(const char *, size_t, size_t, - unsigned long, - void (*)(void *)); /* * Please use this macro to create slab caches. Simply specify the * name of the structure and maybe some flags that are listed above. -- cgit v1.2.3 From af97bace2cca58ee7c94bf4d31e820f29688d7a5 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Mon, 11 Jun 2012 22:56:26 +0200 Subject: i2c-nomadik: move header to The header and driver are only used by arm/mach-u8500 (and potentially arm/mach-nomadik), but the STA2X11 I/O Hub exports on PCIe a number of devices, including i2c-nomadik. This patch allows compilation of the driver under x86. Signed-off-by: Alessandro Rubini Acked-by: Giancarlo Asnaghi Tested-by: Linus Walleij Signed-off-by: Wolfram Sang --- include/linux/platform_data/i2c-nomadik.h | 39 +++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 include/linux/platform_data/i2c-nomadik.h (limited to 'include/linux') diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h new file mode 100644 index 000000000000..c2303c3e4803 --- /dev/null +++ b/include/linux/platform_data/i2c-nomadik.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ +#ifndef __PDATA_I2C_NOMADIK_H +#define __PDATA_I2C_NOMADIK_H + +enum i2c_freq_mode { + I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ + I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ + I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ + I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ +}; + +/** + * struct nmk_i2c_controller - client specific controller configuration + * @clk_freq: clock frequency for the operation mode + * @slsu: Slave data setup time in ns. + * The needed setup time for three modes of operation + * are 250ns, 100ns and 10ns respectively thus leading + * to the values of 14, 6, 2 for a 48 MHz i2c clk + * @tft: Tx FIFO Threshold in bytes + * @rft: Rx FIFO Threshold in bytes + * @timeout Slave response timeout(ms) + * @sm: speed mode + */ +struct nmk_i2c_controller { + unsigned long clk_freq; + unsigned short slsu; + unsigned char tft; + unsigned char rft; + int timeout; + enum i2c_freq_mode sm; +}; + +#endif /* __PDATA_I2C_NOMADIK_H */ -- cgit v1.2.3 From 89a54e48b9cbb44aed1bf6cd712e087b96b6ae65 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Jun 2012 14:33:17 +0200 Subject: nl80211: prepare for non-netdev wireless devs In order to support a P2P device abstraction and Bluetooth high-speed AMPs, we need to have a way to identify virtual interfaces that don't have a netdev associated. Do this by adding a NL80211_ATTR_WDEV attribute to identify a wdev which may or may not also be a netdev. To simplify things, use a 64-bit value with the high 32 bits being the wiphy index for this new wdev identifier in the nl80211 API. Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index db961a59247f..e791487ead37 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -771,6 +771,9 @@ enum nl80211_commands { * @NL80211_ATTR_IFNAME: network interface name * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype * + * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices + * that don't have a netdev (u64) + * * @NL80211_ATTR_MAC: MAC address (various uses) * * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of @@ -1493,6 +1496,8 @@ enum nl80211_attrs { NL80211_ATTR_BG_SCAN_PERIOD, + NL80211_ATTR_WDEV, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 70c6cce040661204986ebbf22224cb24bd77ea71 Mon Sep 17 00:00:00 2001 From: Qiao Zhou Date: Mon, 9 Jul 2012 14:37:32 +0800 Subject: mfd: Support 88pm80x in 80x driver 88PM800 and 88PM805 are two discrete chips used for power management. Hardware designer can use them together or only one of them according to requirement. 88pm80x.c provides common i2c driver handling for both 800 and 805, such as i2c_driver init, regmap init, read/write api etc. 88pm800.c handles specifically for 800, such as chip init, irq init/handle, mfd device register, including rtc, onkey, regulator( to be add later) etc. besides that, 800 has three i2c device, one regular i2c client, two other i2c dummy for gpadc and power purpose. 88pm805.c handles specifically for 805, such as chip init, irq init/handle, mfd device register, including codec, headset/mic detect etc. the i2c operation of both 800 and 805 are via regmap, and 88pm80x-i2c exported a group of r/w bulk r/w and bits set API for facility. Signed-off-by: Qiao Zhou Reviewed-by: Arnd Bergmann Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm80x.h | 368 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 368 insertions(+) create mode 100644 include/linux/mfd/88pm80x.h (limited to 'include/linux') diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h new file mode 100644 index 000000000000..6c126e9714a3 --- /dev/null +++ b/include/linux/mfd/88pm80x.h @@ -0,0 +1,368 @@ +/* + * Marvell 88PM80x Interface + * + * Copyright (C) 2012 Marvell International Ltd. + * Qiao Zhou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MFD_88PM80X_H +#define __LINUX_MFD_88PM80X_H + +#include +#include +#include +#include + +#define PM80X_VERSION_MASK (0xFF) /* 80X chip ID mask */ +enum { + CHIP_INVALID = 0, + CHIP_PM800, + CHIP_PM805, + CHIP_MAX, +}; + +enum { + PM800_ID_BUCK1 = 0, + PM800_ID_BUCK2, + PM800_ID_BUCK3, + PM800_ID_BUCK4, + PM800_ID_BUCK5, + + PM800_ID_LDO1, + PM800_ID_LDO2, + PM800_ID_LDO3, + PM800_ID_LDO4, + PM800_ID_LDO5, + PM800_ID_LDO6, + PM800_ID_LDO7, + PM800_ID_LDO8, + PM800_ID_LDO9, + PM800_ID_LDO10, + PM800_ID_LDO11, + PM800_ID_LDO12, + PM800_ID_LDO13, + PM800_ID_LDO14, + PM800_ID_LDO15, + PM800_ID_LDO16, + PM800_ID_LDO17, + PM800_ID_LDO18, + PM800_ID_LDO19, + + PM800_ID_RG_MAX, +}; +#define PM800_MAX_REGULATOR PM800_ID_RG_MAX /* 5 Bucks, 19 LDOs */ +#define PM800_NUM_BUCK (5) /*5 Bucks */ +#define PM800_NUM_LDO (19) /*19 Bucks */ + +/* page 0 basic: slave adder 0x60 */ + +#define PM800_STATUS_1 (0x01) +#define PM800_ONKEY_STS1 (1 << 0) +#define PM800_EXTON_STS1 (1 << 1) +#define PM800_CHG_STS1 (1 << 2) +#define PM800_BAT_STS1 (1 << 3) +#define PM800_VBUS_STS1 (1 << 4) +#define PM800_LDO_PGOOD_STS1 (1 << 5) +#define PM800_BUCK_PGOOD_STS1 (1 << 6) + +#define PM800_STATUS_2 (0x02) +#define PM800_RTC_ALARM_STS2 (1 << 0) + +/* Wakeup Registers */ +#define PM800_WAKEUP1 (0x0D) + +#define PM800_WAKEUP2 (0x0E) +#define PM800_WAKEUP2_INV_INT (1 << 0) +#define PM800_WAKEUP2_INT_CLEAR (1 << 1) +#define PM800_WAKEUP2_INT_MASK (1 << 2) + +#define PM800_POWER_UP_LOG (0x10) + +/* Referance and low power registers */ +#define PM800_LOW_POWER1 (0x20) +#define PM800_LOW_POWER2 (0x21) +#define PM800_LOW_POWER_CONFIG3 (0x22) +#define PM800_LOW_POWER_CONFIG4 (0x23) + +/* GPIO register */ +#define PM800_GPIO_0_1_CNTRL (0x30) +#define PM800_GPIO0_VAL (1 << 0) +#define PM800_GPIO0_GPIO_MODE(x) (x << 1) +#define PM800_GPIO1_VAL (1 << 4) +#define PM800_GPIO1_GPIO_MODE(x) (x << 5) + +#define PM800_GPIO_2_3_CNTRL (0x31) +#define PM800_GPIO2_VAL (1 << 0) +#define PM800_GPIO2_GPIO_MODE(x) (x << 1) +#define PM800_GPIO3_VAL (1 << 4) +#define PM800_GPIO3_GPIO_MODE(x) (x << 5) +#define PM800_GPIO3_MODE_MASK 0x1F +#define PM800_GPIO3_HEADSET_MODE PM800_GPIO3_GPIO_MODE(6) + +#define PM800_GPIO_4_CNTRL (0x32) +#define PM800_GPIO4_VAL (1 << 0) +#define PM800_GPIO4_GPIO_MODE(x) (x << 1) + +#define PM800_HEADSET_CNTRL (0x38) +#define PM800_HEADSET_DET_EN (1 << 7) +#define PM800_HSDET_SLP (1 << 1) +/* PWM register */ +#define PM800_PWM1 (0x40) +#define PM800_PWM2 (0x41) +#define PM800_PWM3 (0x42) +#define PM800_PWM4 (0x43) + +/* RTC Registers */ +#define PM800_RTC_CONTROL (0xD0) +#define PM800_RTC_MISC1 (0xE1) +#define PM800_RTC_MISC2 (0xE2) +#define PM800_RTC_MISC3 (0xE3) +#define PM800_RTC_MISC4 (0xE4) +#define PM800_RTC_MISC5 (0xE7) +/* bit definitions of RTC Register 1 (0xD0) */ +#define PM800_ALARM1_EN (1 << 0) +#define PM800_ALARM_WAKEUP (1 << 4) +#define PM800_ALARM (1 << 5) +#define PM800_RTC1_USE_XO (1 << 7) + +/* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ + +/* buck registers */ +#define PM800_SLEEP_BUCK1 (0x30) + +/* BUCK Sleep Mode Register 1: BUCK[1..4] */ +#define PM800_BUCK_SLP1 (0x5A) +#define PM800_BUCK1_SLP1_SHIFT 0 +#define PM800_BUCK1_SLP1_MASK (0x3 << PM800_BUCK1_SLP1_SHIFT) + +/* page 2 GPADC: slave adder 0x02 */ +#define PM800_GPADC_MEAS_EN1 (0x01) +#define PM800_MEAS_EN1_VBAT (1 << 2) +#define PM800_GPADC_MEAS_EN2 (0x02) +#define PM800_MEAS_EN2_RFTMP (1 << 0) +#define PM800_MEAS_GP0_EN (1 << 2) +#define PM800_MEAS_GP1_EN (1 << 3) +#define PM800_MEAS_GP2_EN (1 << 4) +#define PM800_MEAS_GP3_EN (1 << 5) +#define PM800_MEAS_GP4_EN (1 << 6) + +#define PM800_GPADC_MISC_CONFIG1 (0x05) +#define PM800_GPADC_MISC_CONFIG2 (0x06) +#define PM800_GPADC_MISC_GPFSM_EN (1 << 0) +#define PM800_GPADC_SLOW_MODE(x) (x << 3) + +#define PM800_GPADC_MISC_CONFIG3 (0x09) +#define PM800_GPADC_MISC_CONFIG4 (0x0A) + +#define PM800_GPADC_PREBIAS1 (0x0F) +#define PM800_GPADC0_GP_PREBIAS_TIME(x) (x << 0) +#define PM800_GPADC_PREBIAS2 (0x10) + +#define PM800_GP_BIAS_ENA1 (0x14) +#define PM800_GPADC_GP_BIAS_EN0 (1 << 0) +#define PM800_GPADC_GP_BIAS_EN1 (1 << 1) +#define PM800_GPADC_GP_BIAS_EN2 (1 << 2) +#define PM800_GPADC_GP_BIAS_EN3 (1 << 3) + +#define PM800_GP_BIAS_OUT1 (0x15) +#define PM800_BIAS_OUT_GP0 (1 << 0) +#define PM800_BIAS_OUT_GP1 (1 << 1) +#define PM800_BIAS_OUT_GP2 (1 << 2) +#define PM800_BIAS_OUT_GP3 (1 << 3) + +#define PM800_GPADC0_LOW_TH 0x20 +#define PM800_GPADC1_LOW_TH 0x21 +#define PM800_GPADC2_LOW_TH 0x22 +#define PM800_GPADC3_LOW_TH 0x23 +#define PM800_GPADC4_LOW_TH 0x24 + +#define PM800_GPADC0_UPP_TH 0x30 +#define PM800_GPADC1_UPP_TH 0x31 +#define PM800_GPADC2_UPP_TH 0x32 +#define PM800_GPADC3_UPP_TH 0x33 +#define PM800_GPADC4_UPP_TH 0x34 + +#define PM800_VBBAT_MEAS1 0x40 +#define PM800_VBBAT_MEAS2 0x41 +#define PM800_VBAT_MEAS1 0x42 +#define PM800_VBAT_MEAS2 0x43 +#define PM800_VSYS_MEAS1 0x44 +#define PM800_VSYS_MEAS2 0x45 +#define PM800_VCHG_MEAS1 0x46 +#define PM800_VCHG_MEAS2 0x47 +#define PM800_TINT_MEAS1 0x50 +#define PM800_TINT_MEAS2 0x51 +#define PM800_PMOD_MEAS1 0x52 +#define PM800_PMOD_MEAS2 0x53 + +#define PM800_GPADC0_MEAS1 0x54 +#define PM800_GPADC0_MEAS2 0x55 +#define PM800_GPADC1_MEAS1 0x56 +#define PM800_GPADC1_MEAS2 0x57 +#define PM800_GPADC2_MEAS1 0x58 +#define PM800_GPADC2_MEAS2 0x59 +#define PM800_GPADC3_MEAS1 0x5A +#define PM800_GPADC3_MEAS2 0x5B +#define PM800_GPADC4_MEAS1 0x5C +#define PM800_GPADC4_MEAS2 0x5D + +#define PM800_GPADC4_AVG1 0xA8 +#define PM800_GPADC4_AVG2 0xA9 + +/* 88PM805 Registers */ +#define PM805_MAIN_POWERUP (0x01) +#define PM805_INT_STATUS0 (0x02) /* for ena/dis all interrupts */ + +#define PM805_STATUS0_INT_CLEAR (1 << 0) +#define PM805_STATUS0_INV_INT (1 << 1) +#define PM800_STATUS0_INT_MASK (1 << 2) + +#define PM805_INT_STATUS1 (0x03) + +#define PM805_INT1_HP1_SHRT (1 << 0) +#define PM805_INT1_HP2_SHRT (1 << 1) +#define PM805_INT1_MIC_CONFLICT (1 << 2) +#define PM805_INT1_CLIP_FAULT (1 << 3) +#define PM805_INT1_LDO_OFF (1 << 4) +#define PM805_INT1_SRC_DPLL_LOCK (1 << 5) + +#define PM805_INT_STATUS2 (0x04) + +#define PM805_INT2_MIC_DET (1 << 0) +#define PM805_INT2_SHRT_BTN_DET (1 << 1) +#define PM805_INT2_VOLM_BTN_DET (1 << 2) +#define PM805_INT2_VOLP_BTN_DET (1 << 3) +#define PM805_INT2_RAW_PLL_FAULT (1 << 4) +#define PM805_INT2_FINE_PLL_FAULT (1 << 5) + +#define PM805_INT_MASK1 (0x05) +#define PM805_INT_MASK2 (0x06) +#define PM805_SHRT_BTN_DET (1 << 1) + +/* number of status and int reg in a row */ +#define PM805_INT_REG_NUM (2) + +#define PM805_MIC_DET1 (0x07) +#define PM805_MIC_DET_EN_MIC_DET (1 << 0) +#define PM805_MIC_DET2 (0x08) +#define PM805_MIC_DET_STATUS1 (0x09) + +#define PM805_MIC_DET_STATUS3 (0x0A) +#define PM805_AUTO_SEQ_STATUS1 (0x0B) +#define PM805_AUTO_SEQ_STATUS2 (0x0C) + +#define PM805_ADC_SETTING1 (0x10) +#define PM805_ADC_SETTING2 (0x11) +#define PM805_ADC_SETTING3 (0x11) +#define PM805_ADC_GAIN1 (0x12) +#define PM805_ADC_GAIN2 (0x13) +#define PM805_DMIC_SETTING (0x15) +#define PM805_DWS_SETTING (0x16) +#define PM805_MIC_CONFLICT_STS (0x17) + +#define PM805_PDM_SETTING1 (0x20) +#define PM805_PDM_SETTING2 (0x21) +#define PM805_PDM_SETTING3 (0x22) +#define PM805_PDM_CONTROL1 (0x23) +#define PM805_PDM_CONTROL2 (0x24) +#define PM805_PDM_CONTROL3 (0x25) + +#define PM805_HEADPHONE_SETTING (0x26) +#define PM805_HEADPHONE_GAIN_A2A (0x27) +#define PM805_HEADPHONE_SHORT_STATE (0x28) +#define PM805_EARPHONE_SETTING (0x29) +#define PM805_AUTO_SEQ_SETTING (0x2A) + +struct pm80x_rtc_pdata { + int vrtc; + int rtc_wakeup; +}; + +struct pm80x_subchip { + struct i2c_client *power_page; /* chip client for power page */ + struct i2c_client *gpadc_page; /* chip client for gpadc page */ + struct regmap *regmap_power; + struct regmap *regmap_gpadc; + unsigned short power_page_addr; /* power page I2C address */ + unsigned short gpadc_page_addr; /* gpadc page I2C address */ +}; + +struct pm80x_chip { + struct pm80x_subchip *subchip; + struct device *dev; + struct i2c_client *client; + struct regmap *regmap; + struct regmap_irq_chip *regmap_irq_chip; + struct regmap_irq_chip_data *irq_data; + unsigned char version; + int id; + int irq; + int irq_mode; + unsigned long wu_flag; + spinlock_t lock; +}; + +struct pm80x_platform_data { + struct pm80x_rtc_pdata *rtc; + unsigned short power_page_addr; /* power page I2C address */ + unsigned short gpadc_page_addr; /* gpadc page I2C address */ + int irq_mode; /* Clear interrupt by read/write(0/1) */ + int batt_det; /* enable/disable */ + int (*plat_config)(struct pm80x_chip *chip, + struct pm80x_platform_data *pdata); +}; + +extern const struct dev_pm_ops pm80x_pm_ops; +extern const struct regmap_config pm80x_regmap_config; + +static inline int pm80x_request_irq(struct pm80x_chip *pm80x, int irq, + irq_handler_t handler, unsigned long flags, + const char *name, void *data) +{ + if (!pm80x->irq_data) + return -EINVAL; + return request_threaded_irq(regmap_irq_get_virq(pm80x->irq_data, irq), + NULL, handler, flags, name, data); +} + +static inline void pm80x_free_irq(struct pm80x_chip *pm80x, int irq, void *data) +{ + if (!pm80x->irq_data) + return; + free_irq(regmap_irq_get_virq(pm80x->irq_data, irq), data); +} + +#ifdef CONFIG_PM +static inline int pm80x_dev_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + set_bit((1 << irq), &chip->wu_flag); + + return 0; +} + +static inline int pm80x_dev_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + clear_bit((1 << irq), &chip->wu_flag); + + return 0; +} +#endif + +extern int pm80x_init(struct i2c_client *client, + const struct i2c_device_id *id) __devinit; +extern int pm80x_deinit(struct i2c_client *client) __devexit; +#endif /* __LINUX_MFD_88PM80X_H */ -- cgit v1.2.3 From 5500e3964b8c154dc5af51ebcd7cd4df5d4abfee Mon Sep 17 00:00:00 2001 From: Qiao Zhou Date: Mon, 9 Jul 2012 14:37:33 +0800 Subject: mfd: Add companion chip in 88pm80x in hw design, 800 is mainly for pmic control, while 805 for audio. but there are 3 registers which controls class D speaker property, and they are defined in 800 i2c client domain. so 805 codec driver needs to use 800 i2c client to access class D speaker reg for audio path management. so add this workaround for the purpose to let 805 access 800 i2c in some scenario. Signed-off-by: Qiao Zhou Reviewed-by: Arnd Bergmann Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm80x.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 6c126e9714a3..103f06d1892d 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -295,6 +295,7 @@ struct pm80x_chip { struct pm80x_subchip *subchip; struct device *dev; struct i2c_client *client; + struct i2c_client *companion; struct regmap *regmap; struct regmap_irq_chip *regmap_irq_chip; struct regmap_irq_chip_data *irq_data; -- cgit v1.2.3 From a232d56e48024c41c87ba884cc0a0fc98e37f5c6 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Thu, 5 Jul 2012 09:28:24 +0530 Subject: mfd: Remove the clocks from the list of max77686 regulators Remove the clocks from the list of regulators to correct the value of MAX77686_REG_MAX which is used in the regulator driver to represent the no. of regulators present in max77686. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Samuel Ortiz --- include/linux/mfd/max77686.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index fcf312678cac..3d7ae4d7fd36 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -67,9 +67,6 @@ enum max77686_regulators { MAX77686_BUCK7, MAX77686_BUCK8, MAX77686_BUCK9, - MAX77686_EN32KHZ_AP, - MAX77686_EN32KHZ_CP, - MAX77686_P32KH, MAX77686_REG_MAX, }; -- cgit v1.2.3 From 929578ab0339fe42bb3ceeaa2e6607189cddf70b Mon Sep 17 00:00:00 2001 From: Keng-Yu Lin Date: Fri, 6 Jul 2012 18:06:11 +0800 Subject: HID: Add suport for the brightness control keys on HP keyboards The keys are found on the keyboards bundled with HP All-In-One machines with USB VID/PID of 04ca:004d and 04f2:1061. Signed-off-by: Keng-Yu Lin Signed-off-by: Jiri Kosina --- include/linux/hid.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index 449fa385703d..42970de1b40c 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -200,6 +200,7 @@ struct hid_item { #define HID_UP_DIGITIZER 0x000d0000 #define HID_UP_PID 0x000f0000 #define HID_UP_HPVENDOR 0xff7f0000 +#define HID_UP_HPVENDOR2 0xff010000 #define HID_UP_MSVENDOR 0xff000000 #define HID_UP_CUSTOM 0x00ff0000 #define HID_UP_LOGIVENDOR 0xffbc0000 -- cgit v1.2.3 From 26c696c678c4ce180599330999e895cded0f625b Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 7 Jul 2012 22:56:40 +0800 Subject: USB: Chipidea: rename struct ci13xxx variables from udc to ci struct ci13xxx represent the controller, which may be device or host, so name its variables as ci. Signed-off-by: Richard Zhao Reviewed-by: Felipe Balbi Signed-off-by: Alexander Shishkin Reviewed-by: Marek Vasut Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/chipidea.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d4cf970656fb..d2f7e494f5c0 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -19,7 +19,7 @@ struct ci13xxx_platform_data { #define CI13XXX_CONTROLLER_RESET_EVENT 0 #define CI13XXX_CONTROLLER_STOPPED_EVENT 1 - void (*notify_event) (struct ci13xxx *udc, unsigned event); + void (*notify_event) (struct ci13xxx *ci, unsigned event); }; /* Default offset of capability registers */ -- cgit v1.2.3 From cbc6dc2af39e1395564445fd71cfcc1c70a96277 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 7 Jul 2012 22:56:41 +0800 Subject: USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers Platform drivers do the similar things to add/remove ci13xxx device, so create a unified one. Signed-off-by: Richard Zhao Reviewed-by: Felipe Balbi Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/chipidea.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d2f7e494f5c0..be078f0bfde2 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -25,4 +25,11 @@ struct ci13xxx_platform_data { /* Default offset of capability registers */ #define DEF_CAPOFFSET 0x100 +/* Add ci13xxx device */ +struct platform_device *ci13xxx_add_device(struct device *dev, + struct resource *res, int nres, + struct ci13xxx_platform_data *platdata); +/* Remove ci13xxx device */ +void ci13xxx_remove_device(struct platform_device *pdev); + #endif -- cgit v1.2.3 From 526c51382d59144a3704970ab111d668e604a10f Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 7 Jul 2012 22:56:44 +0800 Subject: usb: otg: add notify_connect/notify_disconnect callback This let usb phy driver has a chance to change hw settings when connect status change. Signed-off-by: Richard Zhao Acked-by: Felipe Balbi Tested-by: Subodh Nijsure Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/otg.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 0cb2ec2e50c0..45824be0a2f9 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -128,6 +128,9 @@ struct usb_phy { int (*set_suspend)(struct usb_phy *x, int suspend); + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, int port); + int (*notify_disconnect)(struct usb_phy *x, int port); }; @@ -276,6 +279,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) return 0; } +static inline int +usb_phy_notify_connect(struct usb_phy *x, int port) +{ + if (x->notify_connect) + return x->notify_connect(x, port); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, int port) +{ + if (x->notify_disconnect) + return x->notify_disconnect(x, port); + else + return 0; +} + static inline int otg_start_srp(struct usb_otg *otg) { -- cgit v1.2.3 From a2c3d6902f6f9916b5376c44baa8c1d08bf92a27 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 7 Jul 2012 22:56:46 +0800 Subject: usb: chipidea: permit driver bindings pass phy pointer Sometimes, the driver bindings may know what phy they use. For example, when using device tree, the usb controller may have a phandler pointing to usb phy. Signed-off-by: Richard Zhao Reviewed-by: Marek Vasut Acked-by: Felipe Balbi Tested-by: Subodh Nijsure Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/chipidea.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index be078f0bfde2..544825dde823 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -5,12 +5,15 @@ #ifndef __LINUX_USB_CHIPIDEA_H #define __LINUX_USB_CHIPIDEA_H +#include + struct ci13xxx; struct ci13xxx_platform_data { const char *name; /* offset of the capability registers */ uintptr_t capoffset; unsigned power_budget; + struct usb_phy *phy; unsigned long flags; #define CI13XXX_REGS_SHARED BIT(0) #define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) -- cgit v1.2.3 From 939546d1a9f47ed169554c711e1e05965b84ffe1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 9 Jul 2012 10:00:00 +0100 Subject: iio: Add callback to check whether a scan mask is valid This is useful for cases where the number of valid scan masks grows exponentially, but it is rather easy to check whether a mask is valid or not programmatically. An example of such a case is a device with multiple ADCs where each ADC has a upstream MUX, which allows to select from a number of physical channels. +-------+ +-------+ | | | | --- Channel 1 | ADC 1 |---| MUX 1 | --- ... | | | | --- Channel M +-------+ +-------+ . . . . . . . . . +-------+ +-------+ | | | | --- Channel M * N + 1 | ADC N |---| MUX N | --- ... | | | | --- Channel M * N + M +-------+ +-------+ The number of necessary scan masks for this case is (M+1)**N - 1, on the other hand it is easy to check whether subsets for each ADC of the scanmask have only one bit set. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 2afbb6f01afc..be82936c4089 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -363,12 +363,16 @@ struct iio_info { * @predisable: [DRIVER] function to run prior to marking buffer * disabled * @postdisable: [DRIVER] function to run after marking buffer disabled + * @validate_scan_mask: [DRIVER] function callback to check whether a given + * scan mask is valid for the device. */ struct iio_buffer_setup_ops { int (*preenable)(struct iio_dev *); int (*postenable)(struct iio_dev *); int (*predisable)(struct iio_dev *); int (*postdisable)(struct iio_dev *); + bool (*validate_scan_mask)(struct iio_dev *indio_dev, + const unsigned long *scan_mask); }; /** -- cgit v1.2.3 From 81636632057cc1bece2531220dd5803036f95ea9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 9 Jul 2012 10:00:00 +0100 Subject: iio: Introduce iio_validate_scan_mask_onehot Add a helper function for validating a scan mask for devices where exactly one channel must be selected during sampling. This is a common case among devices which have scan mask restrictions so it makes sense to provide this function in the core. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 2a2b6b4d8d05..8ba516fc2ec6 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -177,6 +177,9 @@ ssize_t iio_buffer_show_enable(struct device *dev, int iio_sw_buffer_preenable(struct iio_dev *indio_dev); +bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, + const unsigned long *mask); + #else /* CONFIG_IIO_BUFFER */ static inline int iio_buffer_register(struct iio_dev *indio_dev, -- cgit v1.2.3 From 00eeedcf084a21bf436ff3147f11f0923c811155 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 30 Jun 2012 01:44:37 +0200 Subject: bcma: extend workaround for bcm4331 This patch is based on a recent version of the Broadcom SDK. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 8bbfe31fbac8..1e523cc61860 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -321,6 +321,7 @@ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ -- cgit v1.2.3 From 4b4f5be2e49a604de11dee0ee9b3f151de061724 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 30 Jun 2012 01:44:38 +0200 Subject: bcma: add constants for chip ids The chip IDs are used all over bcma and no constants where defined. This patch adds the constants and makes bcma use them. Acked-by: Arend van Spriel Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 12334f9190cb..03b2f30d2ace 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -137,6 +137,36 @@ struct bcma_host_ops { #define BCMA_MAX_NR_CORES 16 +/* Chip IDs of PCIe devices */ +#define BCMA_CHIP_ID_BCM4313 0x4313 +#define BCMA_CHIP_ID_BCM43224 43224 +#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 +#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa +#define BCMA_CHIP_ID_BCM43225 43225 +#define BCMA_CHIP_ID_BCM43227 43227 +#define BCMA_CHIP_ID_BCM43228 43228 +#define BCMA_CHIP_ID_BCM43421 43421 +#define BCMA_CHIP_ID_BCM43428 43428 +#define BCMA_CHIP_ID_BCM43431 43431 +#define BCMA_CHIP_ID_BCM43460 43460 +#define BCMA_CHIP_ID_BCM4331 0x4331 +#define BCMA_CHIP_ID_BCM6362 0x6362 +#define BCMA_CHIP_ID_BCM4360 0x4360 +#define BCMA_CHIP_ID_BCM4352 0x4352 + +/* Chip IDs of SoCs */ +#define BCMA_CHIP_ID_BCM4706 0x5300 +#define BCMA_CHIP_ID_BCM4716 0x4716 +#define BCMA_PKG_ID_BCM4716 8 +#define BCMA_PKG_ID_BCM4717 9 +#define BCMA_PKG_ID_BCM4718 10 +#define BCMA_CHIP_ID_BCM47162 47162 +#define BCMA_CHIP_ID_BCM4748 0x4748 +#define BCMA_CHIP_ID_BCM4749 0x4749 +#define BCMA_CHIP_ID_BCM5356 0x5356 +#define BCMA_CHIP_ID_BCM5357 0x5357 +#define BCMA_CHIP_ID_BCM53572 53572 + struct bcma_device { struct bcma_bus *bus; struct bcma_device_id id; -- cgit v1.2.3 From b9562545ef0b13c0440ccd8d6dd4111fb77cb17a Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 30 Jun 2012 01:44:41 +0200 Subject: bcma: complete workaround for BCMA43224 and BCM4313 This code is based on the Broadcom SDK and brcmsmac. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 1e523cc61860..09f31ade1410 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -325,6 +325,14 @@ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ +/* 43224 chip-specific ChipControl register bits */ +#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ +#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ +#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ + +/* 4313 Chip specific ChipControl register bits */ +#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -- cgit v1.2.3 From c586e10992b2e5e2dfe7cca9be615818cfb98605 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 30 Jun 2012 01:44:44 +0200 Subject: bcma: add bcma_pmu_spuravoid_pllupdate() This function is needed by brcmsmac. This code is based on code from the Broadcom SDK. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 09f31ade1410..12975eac403f 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -308,6 +308,19 @@ #define BCMA_CC_PPL_PCHI_OFF 5 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f +#define BCMA_CC_PMU_PLL_CTL0 0 +#define BCMA_CC_PMU_PLL_CTL1 1 +#define BCMA_CC_PMU_PLL_CTL2 2 +#define BCMA_CC_PMU_PLL_CTL3 3 +#define BCMA_CC_PMU_PLL_CTL4 4 +#define BCMA_CC_PMU_PLL_CTL5 5 + +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 + +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 + /* BCM4331 ChipControl numbers. */ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ @@ -420,5 +433,6 @@ extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); +extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); #endif /* LINUX_BCMA_DRIVER_CC_H_ */ -- cgit v1.2.3 From 01d719a2287ec34f631800d10f1fad3c134c3e89 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 4 Jul 2012 00:14:04 +0200 Subject: NFC: Add ISO 14443 type B protocol Some devices (e.g. Sony's PaSoRi) can not do type B polling, so we have to make a distinction between ISO14443 type A and B poll modes. Cc: Eric Lapuyade Cc: Ilan Elias Signed-off-by: Samuel Ortiz --- include/linux/nfc.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index f4e6dd915b1c..6189f27e305b 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -136,8 +136,9 @@ enum nfc_attrs { #define NFC_PROTO_FELICA 3 #define NFC_PROTO_ISO14443 4 #define NFC_PROTO_NFC_DEP 5 +#define NFC_PROTO_ISO14443_B 6 -#define NFC_PROTO_MAX 6 +#define NFC_PROTO_MAX 7 /* NFC communication modes */ #define NFC_COMM_ACTIVE 0 @@ -149,11 +150,12 @@ enum nfc_attrs { #define NFC_RF_NONE 2 /* NFC protocols masks used in bitsets */ -#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) -#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE) -#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA) -#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) -#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) +#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) +#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE) +#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA) +#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) +#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) +#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) struct sockaddr_nfc { sa_family_t sa_family; -- cgit v1.2.3 From 2b28ae1912e5ce5bb0527e352ae6ff04e76183d1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jul 2012 13:38:57 -0600 Subject: PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) 9d265124d051 and 15a260d53f7c added quirks for P2P bridges that support I/O windows that start/end at 1K boundaries, not just the 4K boundaries defined by the PCI spec. For details, see the IOBL_ADR register and the EN1K bit in the CNF register in the Intel 82870P2 (P64H2). These quirks complicate the code that reads P2P bridge windows (pci_read_bridge_io() and pci_cfg_fake_ranges()) because the bridge I/O resource is updated in the HEADER quirk, in pci_read_bridge_io(), in pci_setup_bridge(), and again in the FINAL quirk. This is confusing and makes it impossible to reassign the bridge windows after FINAL quirks are run. This patch adds support for 1K windows in the generic paths, so the HEADER quirk only has to enable this support. The FINAL quirk, which used to undo damage done by pci_setup_bridge(), is no longer needed. This removes "if (!res->start) res->start = ..." from pci_read_bridge_io(); that was part of 9d265124d051 to avoid overwriting the resource filled in by the quirk. Since pci_read_bridge_io() itself now knows about granularity, the quirk no longer updates the resource and this test is no longer needed. Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + include/linux/pci_regs.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..89b46fd245c6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -324,6 +324,7 @@ struct pci_dev { unsigned int is_hotplug_bridge:1; unsigned int __aer_firmware_first_valid:1; unsigned int __aer_firmware_first:1; + unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */ pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f543412..88c9ea56e252 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -125,7 +125,8 @@ #define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ #define PCI_IO_RANGE_TYPE_16 0x00 #define PCI_IO_RANGE_TYPE_32 0x01 -#define PCI_IO_RANGE_MASK (~0x0fUL) +#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */ +#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */ #define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ #define PCI_MEMORY_BASE 0x20 /* Memory range behind */ #define PCI_MEMORY_LIMIT 0x22 -- cgit v1.2.3 From afae021abeadc58aec5074f26a1d62912773edf7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 10 Jul 2012 11:49:30 +0900 Subject: sh: pfc: Shuffle PFC support core. This follows the intc/clk changes and shuffles the PFC support code under its own directory. This will facilitate better code sharing, and allow us to trim down the exported interface by quite a margin. Signed-off-by: Paul Mundt --- include/linux/sh_pfc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h index ed1d8234f6ae..f522550fc32b 100644 --- a/include/linux/sh_pfc.h +++ b/include/linux/sh_pfc.h @@ -127,10 +127,10 @@ struct sh_pfc { /* XXX compat for now */ #define pinmux_info sh_pfc -/* drivers/sh/pfc-gpio.c */ +/* drivers/sh/pfc/gpio.c */ int sh_pfc_register_gpiochip(struct sh_pfc *pfc); -/* drivers/sh/pfc.c */ +/* drivers/sh/pfc/core.c */ int register_sh_pfc(struct sh_pfc *pfc); int sh_pfc_read_bit(struct pinmux_data_reg *dr, unsigned long in_pos); -- cgit v1.2.3 From 72c7afa10f272710028f244da65d35e571144085 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 10 Jul 2012 11:59:29 +0900 Subject: sh: pfc: Dumb GPIO stringification. This implements fairly simplistic stringification of existing pinmux GPIOs for easy enum id -> string mapping, which will subsequently be used by the pinctrl support code. Signed-off-by: Paul Mundt --- include/linux/sh_pfc.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h index f522550fc32b..8c4cbcb9064d 100644 --- a/include/linux/sh_pfc.h +++ b/include/linux/sh_pfc.h @@ -11,6 +11,7 @@ #ifndef __SH_PFC_H #define __SH_PFC_H +#include #include typedef unsigned short pinmux_enum_t; @@ -37,10 +38,11 @@ enum { struct pinmux_gpio { pinmux_enum_t enum_id; pinmux_flag_t flags; + const char *name; }; #define PINMUX_GPIO(gpio, data_or_mark) \ - [gpio] = { .enum_id = data_or_mark, .flags = PINMUX_TYPE_NONE } + [gpio] = { .name = __stringify(gpio), .enum_id = data_or_mark, .flags = PINMUX_TYPE_NONE } #define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0 -- cgit v1.2.3 From ca5481c68e9fbcea62bb3c78ae6cccf99ca8fb73 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 10 Jul 2012 12:08:14 +0900 Subject: sh: pfc: Rudimentary pinctrl-backed GPIO support. This begins the migration of the PFC core to the pinctrl subsystem. Initial support is very basic, with the bulk of the implementation simply being nopped out in such a way to allow registration with the pinctrl core to succeed. The gpio chip driver is stripped down considerably now relying purely on pinctrl API calls to manage the bulk of its operations. This provides a basis for further PFC refactoring, including decoupling pin functions from the GPIO API, establishing pin groups, and so forth. These will all be dealt with incrementally so as to introduce as few growing and migratory pains to tree-wide PFC pinmux users today. When the interfaces have been well established and in-tree users have been migrated off of the legacy interfaces it will be possible to strip down the core considerably, leading to eventual drivers/pinctrl rehoming. Signed-off-by: Paul Mundt --- include/linux/sh_pfc.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h index 8c4cbcb9064d..c19a0925829a 100644 --- a/include/linux/sh_pfc.h +++ b/include/linux/sh_pfc.h @@ -132,6 +132,9 @@ struct sh_pfc { /* drivers/sh/pfc/gpio.c */ int sh_pfc_register_gpiochip(struct sh_pfc *pfc); +/* drivers/sh/pfc/pinctrl.c */ +int sh_pfc_register_pinctrl(struct sh_pfc *pfc); + /* drivers/sh/pfc/core.c */ int register_sh_pfc(struct sh_pfc *pfc); @@ -144,8 +147,6 @@ int sh_pfc_gpio_to_enum(struct sh_pfc *pfc, unsigned gpio, int pos, pinmux_enum_t *enum_idp); int sh_pfc_config_gpio(struct sh_pfc *pfc, unsigned gpio, int pinmux_type, int cfg_mode); -int sh_pfc_set_direction(struct sh_pfc *pfc, unsigned gpio, - int new_pinmux_type); /* xxx */ static inline int register_pinmux(struct pinmux_info *pip) -- cgit v1.2.3 From 2a51da04fef56ec83f790bf0746e90fe40215a92 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 9 Jul 2012 19:33:14 +0100 Subject: mfd: Add support for multiple arizona PDM speaker outputs The registers have stride 2 so we can write the loop properly now. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/arizona/pdata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index fa2cb9885d62..68ff91aa3888 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -62,7 +62,7 @@ #define ARIZONA_MAX_OUTPUT 5 -#define ARIZONA_MAX_PDM_SPK 1 +#define ARIZONA_MAX_PDM_SPK 2 struct regulator_init_data; -- cgit v1.2.3 From 1faedca9c7bfd3055204b9d10017ce77ad03fc72 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 9 Jul 2012 19:33:15 +0100 Subject: mfd: Add even more arizona register definitions A few more registers used on newer devices. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/arizona/registers.h | 211 +++++++++++++++++++++++++++++++++- 1 file changed, 210 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 8f49106d7bda..7671a287dfee 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -145,7 +145,7 @@ #define ARIZONA_IN3R_CONTROL 0x324 #define ARIZONA_ADC_DIGITAL_VOLUME_3R 0x325 #define ARIZONA_DMIC3R_CONTROL 0x326 -#define ARIZONA_IN4_CONTROL 0x328 +#define ARIZONA_IN4L_CONTROL 0x328 #define ARIZONA_ADC_DIGITAL_VOLUME_4L 0x329 #define ARIZONA_DMIC4L_CONTROL 0x32A #define ARIZONA_ADC_DIGITAL_VOLUME_4R 0x32D @@ -2129,6 +2129,14 @@ /* * R768 (0x300) - Input Enables */ +#define ARIZONA_IN4L_ENA 0x0080 /* IN4L_ENA */ +#define ARIZONA_IN4L_ENA_MASK 0x0080 /* IN4L_ENA */ +#define ARIZONA_IN4L_ENA_SHIFT 7 /* IN4L_ENA */ +#define ARIZONA_IN4L_ENA_WIDTH 1 /* IN4L_ENA */ +#define ARIZONA_IN4R_ENA 0x0040 /* IN4R_ENA */ +#define ARIZONA_IN4R_ENA_MASK 0x0040 /* IN4R_ENA */ +#define ARIZONA_IN4R_ENA_SHIFT 6 /* IN4R_ENA */ +#define ARIZONA_IN4R_ENA_WIDTH 1 /* IN4R_ENA */ #define ARIZONA_IN3L_ENA 0x0020 /* IN3L_ENA */ #define ARIZONA_IN3L_ENA_MASK 0x0020 /* IN3L_ENA */ #define ARIZONA_IN3L_ENA_SHIFT 5 /* IN3L_ENA */ @@ -2372,9 +2380,71 @@ #define ARIZONA_IN3_DMICR_DLY_SHIFT 0 /* IN3_DMICR_DLY - [5:0] */ #define ARIZONA_IN3_DMICR_DLY_WIDTH 6 /* IN3_DMICR_DLY - [5:0] */ +/* + * R808 (0x328) - IN4 Control + */ +#define ARIZONA_IN4_OSR_MASK 0x6000 /* IN4_OSR - [14:13] */ +#define ARIZONA_IN4_OSR_SHIFT 13 /* IN4_OSR - [14:13] */ +#define ARIZONA_IN4_OSR_WIDTH 2 /* IN4_OSR - [14:13] */ +#define ARIZONA_IN4_DMIC_SUP_MASK 0x1800 /* IN4_DMIC_SUP - [12:11] */ +#define ARIZONA_IN4_DMIC_SUP_SHIFT 11 /* IN4_DMIC_SUP - [12:11] */ +#define ARIZONA_IN4_DMIC_SUP_WIDTH 2 /* IN4_DMIC_SUP - [12:11] */ + +/* + * R809 (0x329) - ADC Digital Volume 4L + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN4L_MUTE 0x0100 /* IN4L_MUTE */ +#define ARIZONA_IN4L_MUTE_MASK 0x0100 /* IN4L_MUTE */ +#define ARIZONA_IN4L_MUTE_SHIFT 8 /* IN4L_MUTE */ +#define ARIZONA_IN4L_MUTE_WIDTH 1 /* IN4L_MUTE */ +#define ARIZONA_IN4L_DIG_VOL_MASK 0x00FF /* IN4L_DIG_VOL - [7:0] */ +#define ARIZONA_IN4L_DIG_VOL_SHIFT 0 /* IN4L_DIG_VOL - [7:0] */ +#define ARIZONA_IN4L_DIG_VOL_WIDTH 8 /* IN4L_DIG_VOL - [7:0] */ + +/* + * R810 (0x32A) - DMIC4L Control + */ +#define ARIZONA_IN4L_DMIC_DLY_MASK 0x003F /* IN4L_DMIC_DLY - [5:0] */ +#define ARIZONA_IN4L_DMIC_DLY_SHIFT 0 /* IN4L_DMIC_DLY - [5:0] */ +#define ARIZONA_IN4L_DMIC_DLY_WIDTH 6 /* IN4L_DMIC_DLY - [5:0] */ + +/* + * R813 (0x32D) - ADC Digital Volume 4R + */ +#define ARIZONA_IN_VU 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_MASK 0x0200 /* IN_VU */ +#define ARIZONA_IN_VU_SHIFT 9 /* IN_VU */ +#define ARIZONA_IN_VU_WIDTH 1 /* IN_VU */ +#define ARIZONA_IN4R_MUTE 0x0100 /* IN4R_MUTE */ +#define ARIZONA_IN4R_MUTE_MASK 0x0100 /* IN4R_MUTE */ +#define ARIZONA_IN4R_MUTE_SHIFT 8 /* IN4R_MUTE */ +#define ARIZONA_IN4R_MUTE_WIDTH 1 /* IN4R_MUTE */ +#define ARIZONA_IN4R_DIG_VOL_MASK 0x00FF /* IN4R_DIG_VOL - [7:0] */ +#define ARIZONA_IN4R_DIG_VOL_SHIFT 0 /* IN4R_DIG_VOL - [7:0] */ +#define ARIZONA_IN4R_DIG_VOL_WIDTH 8 /* IN4R_DIG_VOL - [7:0] */ + +/* + * R814 (0x32E) - DMIC4R Control + */ +#define ARIZONA_IN4R_DMIC_DLY_MASK 0x003F /* IN4R_DMIC_DLY - [5:0] */ +#define ARIZONA_IN4R_DMIC_DLY_SHIFT 0 /* IN4R_DMIC_DLY - [5:0] */ +#define ARIZONA_IN4R_DMIC_DLY_WIDTH 6 /* IN4R_DMIC_DLY - [5:0] */ + /* * R1024 (0x400) - Output Enables 1 */ +#define ARIZONA_OUT6L_ENA 0x0800 /* OUT6L_ENA */ +#define ARIZONA_OUT6L_ENA_MASK 0x0800 /* OUT6L_ENA */ +#define ARIZONA_OUT6L_ENA_SHIFT 11 /* OUT6L_ENA */ +#define ARIZONA_OUT6L_ENA_WIDTH 1 /* OUT6L_ENA */ +#define ARIZONA_OUT6R_ENA 0x0400 /* OUT6R_ENA */ +#define ARIZONA_OUT6R_ENA_MASK 0x0400 /* OUT6R_ENA */ +#define ARIZONA_OUT6R_ENA_SHIFT 10 /* OUT6R_ENA */ +#define ARIZONA_OUT6R_ENA_WIDTH 1 /* OUT6R_ENA */ #define ARIZONA_OUT5L_ENA 0x0200 /* OUT5L_ENA */ #define ARIZONA_OUT5L_ENA_MASK 0x0200 /* OUT5L_ENA */ #define ARIZONA_OUT5L_ENA_SHIFT 9 /* OUT5L_ENA */ @@ -2876,6 +2946,82 @@ #define ARIZONA_OUT5R_NGATE_SRC_SHIFT 0 /* OUT5R_NGATE_SRC - [11:0] */ #define ARIZONA_OUT5R_NGATE_SRC_WIDTH 12 /* OUT5R_NGATE_SRC - [11:0] */ +/* + * R1080 (0x438) - Output Path Config 6L + */ +#define ARIZONA_OUT6_OSR 0x2000 /* OUT6_OSR */ +#define ARIZONA_OUT6_OSR_MASK 0x2000 /* OUT6_OSR */ +#define ARIZONA_OUT6_OSR_SHIFT 13 /* OUT6_OSR */ +#define ARIZONA_OUT6_OSR_WIDTH 1 /* OUT6_OSR */ +#define ARIZONA_OUT6L_ANC_SRC_MASK 0x0C00 /* OUT6L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT6L_ANC_SRC_SHIFT 10 /* OUT6L_ANC_SRC - [11:10] */ +#define ARIZONA_OUT6L_ANC_SRC_WIDTH 2 /* OUT6L_ANC_SRC - [11:10] */ + +/* + * R1081 (0x439) - DAC Digital Volume 6L + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT6L_MUTE 0x0100 /* OUT6L_MUTE */ +#define ARIZONA_OUT6L_MUTE_MASK 0x0100 /* OUT6L_MUTE */ +#define ARIZONA_OUT6L_MUTE_SHIFT 8 /* OUT6L_MUTE */ +#define ARIZONA_OUT6L_MUTE_WIDTH 1 /* OUT6L_MUTE */ +#define ARIZONA_OUT6L_VOL_MASK 0x00FF /* OUT6L_VOL - [7:0] */ +#define ARIZONA_OUT6L_VOL_SHIFT 0 /* OUT6L_VOL - [7:0] */ +#define ARIZONA_OUT6L_VOL_WIDTH 8 /* OUT6L_VOL - [7:0] */ + +/* + * R1082 (0x43A) - DAC Volume Limit 6L + */ +#define ARIZONA_OUT6L_VOL_LIM_MASK 0x00FF /* OUT6L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT6L_VOL_LIM_SHIFT 0 /* OUT6L_VOL_LIM - [7:0] */ +#define ARIZONA_OUT6L_VOL_LIM_WIDTH 8 /* OUT6L_VOL_LIM - [7:0] */ + +/* + * R1083 (0x43B) - Noise Gate Select 6L + */ +#define ARIZONA_OUT6L_NGATE_SRC_MASK 0x0FFF /* OUT6L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT6L_NGATE_SRC_SHIFT 0 /* OUT6L_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT6L_NGATE_SRC_WIDTH 12 /* OUT6L_NGATE_SRC - [11:0] */ + +/* + * R1084 (0x43C) - Output Path Config 6R + */ +#define ARIZONA_OUT6R_ANC_SRC_MASK 0x0C00 /* OUT6R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT6R_ANC_SRC_SHIFT 10 /* OUT6R_ANC_SRC - [11:10] */ +#define ARIZONA_OUT6R_ANC_SRC_WIDTH 2 /* OUT6R_ANC_SRC - [11:10] */ + +/* + * R1085 (0x43D) - DAC Digital Volume 6R + */ +#define ARIZONA_OUT_VU 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_MASK 0x0200 /* OUT_VU */ +#define ARIZONA_OUT_VU_SHIFT 9 /* OUT_VU */ +#define ARIZONA_OUT_VU_WIDTH 1 /* OUT_VU */ +#define ARIZONA_OUT6R_MUTE 0x0100 /* OUT6R_MUTE */ +#define ARIZONA_OUT6R_MUTE_MASK 0x0100 /* OUT6R_MUTE */ +#define ARIZONA_OUT6R_MUTE_SHIFT 8 /* OUT6R_MUTE */ +#define ARIZONA_OUT6R_MUTE_WIDTH 1 /* OUT6R_MUTE */ +#define ARIZONA_OUT6R_VOL_MASK 0x00FF /* OUT6R_VOL - [7:0] */ +#define ARIZONA_OUT6R_VOL_SHIFT 0 /* OUT6R_VOL - [7:0] */ +#define ARIZONA_OUT6R_VOL_WIDTH 8 /* OUT6R_VOL - [7:0] */ + +/* + * R1086 (0x43E) - DAC Volume Limit 6R + */ +#define ARIZONA_OUT6R_VOL_LIM_MASK 0x00FF /* OUT6R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT6R_VOL_LIM_SHIFT 0 /* OUT6R_VOL_LIM - [7:0] */ +#define ARIZONA_OUT6R_VOL_LIM_WIDTH 8 /* OUT6R_VOL_LIM - [7:0] */ + +/* + * R1087 (0x43F) - Noise Gate Select 6R + */ +#define ARIZONA_OUT6R_NGATE_SRC_MASK 0x0FFF /* OUT6R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT6R_NGATE_SRC_SHIFT 0 /* OUT6R_NGATE_SRC - [11:0] */ +#define ARIZONA_OUT6R_NGATE_SRC_WIDTH 12 /* OUT6R_NGATE_SRC - [11:0] */ + /* * R1104 (0x450) - DAC AEC Control 1 */ @@ -2932,6 +3078,33 @@ #define ARIZONA_SPK1_FMT_SHIFT 0 /* SPK1_FMT */ #define ARIZONA_SPK1_FMT_WIDTH 1 /* SPK1_FMT */ +/* + * R1170 (0x492) - PDM SPK2 CTRL 1 + */ +#define ARIZONA_SPK2R_MUTE 0x2000 /* SPK2R_MUTE */ +#define ARIZONA_SPK2R_MUTE_MASK 0x2000 /* SPK2R_MUTE */ +#define ARIZONA_SPK2R_MUTE_SHIFT 13 /* SPK2R_MUTE */ +#define ARIZONA_SPK2R_MUTE_WIDTH 1 /* SPK2R_MUTE */ +#define ARIZONA_SPK2L_MUTE 0x1000 /* SPK2L_MUTE */ +#define ARIZONA_SPK2L_MUTE_MASK 0x1000 /* SPK2L_MUTE */ +#define ARIZONA_SPK2L_MUTE_SHIFT 12 /* SPK2L_MUTE */ +#define ARIZONA_SPK2L_MUTE_WIDTH 1 /* SPK2L_MUTE */ +#define ARIZONA_SPK2_MUTE_ENDIAN 0x0100 /* SPK2_MUTE_ENDIAN */ +#define ARIZONA_SPK2_MUTE_ENDIAN_MASK 0x0100 /* SPK2_MUTE_ENDIAN */ +#define ARIZONA_SPK2_MUTE_ENDIAN_SHIFT 8 /* SPK2_MUTE_ENDIAN */ +#define ARIZONA_SPK2_MUTE_ENDIAN_WIDTH 1 /* SPK2_MUTE_ENDIAN */ +#define ARIZONA_SPK2_MUTE_SEQ_MASK 0x00FF /* SPK2_MUTE_SEQ - [7:0] */ +#define ARIZONA_SPK2_MUTE_SEQ_SHIFT 0 /* SPK2_MUTE_SEQ - [7:0] */ +#define ARIZONA_SPK2_MUTE_SEQ_WIDTH 8 /* SPK2_MUTE_SEQ - [7:0] */ + +/* + * R1171 (0x493) - PDM SPK2 CTRL 2 + */ +#define ARIZONA_SPK2_FMT 0x0001 /* SPK2_FMT */ +#define ARIZONA_SPK2_FMT_MASK 0x0001 /* SPK2_FMT */ +#define ARIZONA_SPK2_FMT_SHIFT 0 /* SPK2_FMT */ +#define ARIZONA_SPK2_FMT_WIDTH 1 /* SPK2_FMT */ + /* * R1244 (0x4DC) - DAC comp 1 */ @@ -4028,10 +4201,46 @@ /* * R3329 (0xD01) - Interrupt Status 2 */ +#define ARIZONA_DSP4_RAM_RDY_EINT1 0x0800 /* DSP4_RAM_RDY_EINT1 */ +#define ARIZONA_DSP4_RAM_RDY_EINT1_MASK 0x0800 /* DSP4_RAM_RDY_EINT1 */ +#define ARIZONA_DSP4_RAM_RDY_EINT1_SHIFT 11 /* DSP4_RAM_RDY_EINT1 */ +#define ARIZONA_DSP4_RAM_RDY_EINT1_WIDTH 1 /* DSP4_RAM_RDY_EINT1 */ +#define ARIZONA_DSP3_RAM_RDY_EINT1 0x0400 /* DSP3_RAM_RDY_EINT1 */ +#define ARIZONA_DSP3_RAM_RDY_EINT1_MASK 0x0400 /* DSP3_RAM_RDY_EINT1 */ +#define ARIZONA_DSP3_RAM_RDY_EINT1_SHIFT 10 /* DSP3_RAM_RDY_EINT1 */ +#define ARIZONA_DSP3_RAM_RDY_EINT1_WIDTH 1 /* DSP3_RAM_RDY_EINT1 */ +#define ARIZONA_DSP2_RAM_RDY_EINT1 0x0200 /* DSP2_RAM_RDY_EINT1 */ +#define ARIZONA_DSP2_RAM_RDY_EINT1_MASK 0x0200 /* DSP2_RAM_RDY_EINT1 */ +#define ARIZONA_DSP2_RAM_RDY_EINT1_SHIFT 9 /* DSP2_RAM_RDY_EINT1 */ +#define ARIZONA_DSP2_RAM_RDY_EINT1_WIDTH 1 /* DSP2_RAM_RDY_EINT1 */ #define ARIZONA_DSP1_RAM_RDY_EINT1 0x0100 /* DSP1_RAM_RDY_EINT1 */ #define ARIZONA_DSP1_RAM_RDY_EINT1_MASK 0x0100 /* DSP1_RAM_RDY_EINT1 */ #define ARIZONA_DSP1_RAM_RDY_EINT1_SHIFT 8 /* DSP1_RAM_RDY_EINT1 */ #define ARIZONA_DSP1_RAM_RDY_EINT1_WIDTH 1 /* DSP1_RAM_RDY_EINT1 */ +#define ARIZONA_DSP_IRQ8_EINT1 0x0080 /* DSP_IRQ8_EINT1 */ +#define ARIZONA_DSP_IRQ8_EINT1_MASK 0x0080 /* DSP_IRQ8_EINT1 */ +#define ARIZONA_DSP_IRQ8_EINT1_SHIFT 7 /* DSP_IRQ8_EINT1 */ +#define ARIZONA_DSP_IRQ8_EINT1_WIDTH 1 /* DSP_IRQ8_EINT1 */ +#define ARIZONA_DSP_IRQ7_EINT1 0x0040 /* DSP_IRQ7_EINT1 */ +#define ARIZONA_DSP_IRQ7_EINT1_MASK 0x0040 /* DSP_IRQ7_EINT1 */ +#define ARIZONA_DSP_IRQ7_EINT1_SHIFT 6 /* DSP_IRQ7_EINT1 */ +#define ARIZONA_DSP_IRQ7_EINT1_WIDTH 1 /* DSP_IRQ7_EINT1 */ +#define ARIZONA_DSP_IRQ6_EINT1 0x0020 /* DSP_IRQ6_EINT1 */ +#define ARIZONA_DSP_IRQ6_EINT1_MASK 0x0020 /* DSP_IRQ6_EINT1 */ +#define ARIZONA_DSP_IRQ6_EINT1_SHIFT 5 /* DSP_IRQ6_EINT1 */ +#define ARIZONA_DSP_IRQ6_EINT1_WIDTH 1 /* DSP_IRQ6_EINT1 */ +#define ARIZONA_DSP_IRQ5_EINT1 0x0010 /* DSP_IRQ5_EINT1 */ +#define ARIZONA_DSP_IRQ5_EINT1_MASK 0x0010 /* DSP_IRQ5_EINT1 */ +#define ARIZONA_DSP_IRQ5_EINT1_SHIFT 4 /* DSP_IRQ5_EINT1 */ +#define ARIZONA_DSP_IRQ5_EINT1_WIDTH 1 /* DSP_IRQ5_EINT1 */ +#define ARIZONA_DSP_IRQ4_EINT1 0x0008 /* DSP_IRQ4_EINT1 */ +#define ARIZONA_DSP_IRQ4_EINT1_MASK 0x0008 /* DSP_IRQ4_EINT1 */ +#define ARIZONA_DSP_IRQ4_EINT1_SHIFT 3 /* DSP_IRQ4_EINT1 */ +#define ARIZONA_DSP_IRQ4_EINT1_WIDTH 1 /* DSP_IRQ4_EINT1 */ +#define ARIZONA_DSP_IRQ3_EINT1 0x0004 /* DSP_IRQ3_EINT1 */ +#define ARIZONA_DSP_IRQ3_EINT1_MASK 0x0004 /* DSP_IRQ3_EINT1 */ +#define ARIZONA_DSP_IRQ3_EINT1_SHIFT 2 /* DSP_IRQ3_EINT1 */ +#define ARIZONA_DSP_IRQ3_EINT1_WIDTH 1 /* DSP_IRQ3_EINT1 */ #define ARIZONA_DSP_IRQ2_EINT1 0x0002 /* DSP_IRQ2_EINT1 */ #define ARIZONA_DSP_IRQ2_EINT1_MASK 0x0002 /* DSP_IRQ2_EINT1 */ #define ARIZONA_DSP_IRQ2_EINT1_SHIFT 1 /* DSP_IRQ2_EINT1 */ -- cgit v1.2.3 From 6fe9cbd1119b3cd2595dabaf25a400eed95b170c Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 13 Jun 2012 18:58:09 +0200 Subject: clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver Timer 0 is used as free-running clocksource, while timer 1 is used as clock_event_device. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Signed-off-by: Lior Amsalem Reviewed-by: Thomas Gleixner Tested-by: Yehuda Yitschak Tested-by: Lior Amsalem Acked-by: Andrew Lunn CC: Thomas Gleixner CC: John Stultz --- include/linux/time-armada-370-xp.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/linux/time-armada-370-xp.h (limited to 'include/linux') diff --git a/include/linux/time-armada-370-xp.h b/include/linux/time-armada-370-xp.h new file mode 100644 index 000000000000..dfdfdc03115b --- /dev/null +++ b/include/linux/time-armada-370-xp.h @@ -0,0 +1,18 @@ +/* + * Marvell Armada 370/XP SoC timer handling. + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem + * Gregory CLEMENT + * Thomas Petazzoni + * + */ +#ifndef __TIME_ARMADA_370_XPPRCMU_H +#define __TIME_ARMADA_370_XPPRCMU_H + +#include + +void __init armada_370_xp_timer_init(void); + +#endif -- cgit v1.2.3 From e95d8aafa5d911bf523bc47fe89f3336eb8a1b51 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 10 Jul 2012 13:35:50 +0000 Subject: of: mtd: nuke useless const qualifier This patch does the following: -const int of_get_nand_ecc_mode(struct device_node *np) +int of_get_nand_ecc_mode(struct device_node *np) because: 1. it is probably just a typo? 2. it causes warnings like this when people assing the returned value to an 'int' variable: include/linux/of_mtd.h:14:18: warning: type qualifiers ignored on functi= on return type [-Wignored-qualifiers] Remove also the unnecessary "extern" qualifier to be consistent with other declarations in this file. Signed-off-by: Artem Bityutskiy Signed-off-by: Rob Herring --- include/linux/of_mtd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h index bae1b6094c63..ed7f267e6389 100644 --- a/include/linux/of_mtd.h +++ b/include/linux/of_mtd.h @@ -11,7 +11,7 @@ #ifdef CONFIG_OF_MTD #include -extern const int of_get_nand_ecc_mode(struct device_node *np); +int of_get_nand_ecc_mode(struct device_node *np); int of_get_nand_bus_width(struct device_node *np); bool of_get_nand_on_flash_bbt(struct device_node *np); #endif -- cgit v1.2.3 From 00f5ce99dc6ee46c3113393cc8fa12173f9bbcd7 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 19 Jun 2012 11:21:40 +0300 Subject: mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- include/linux/mlx4/device.h | 99 ++++++++++++++++++++++++++++++++++++++++++++- include/linux/mlx4/driver.h | 3 +- 2 files changed, 100 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 8eadf0f14cc5..560b2201519f 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -96,7 +96,8 @@ enum { MLX4_DEV_CAP_FLAG_VEP_UC_STEER = 1LL << 41, MLX4_DEV_CAP_FLAG_VEP_MC_STEER = 1LL << 42, MLX4_DEV_CAP_FLAG_COUNTERS = 1LL << 48, - MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55 + MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55, + MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV = 1LL << 59, }; enum { @@ -138,6 +139,7 @@ enum mlx4_event { MLX4_EVENT_TYPE_COMM_CHANNEL = 0x18, MLX4_EVENT_TYPE_FATAL_WARNING = 0x1b, MLX4_EVENT_TYPE_FLR_EVENT = 0x1c, + MLX4_EVENT_TYPE_PORT_MNG_CHG_EVENT = 0x1d, MLX4_EVENT_TYPE_NONE = 0xff, }; @@ -235,6 +237,24 @@ enum { MLX4_MAX_FAST_REG_PAGES = 511, }; +enum { + MLX4_DEV_PMC_SUBTYPE_GUID_INFO = 0x14, + MLX4_DEV_PMC_SUBTYPE_PORT_INFO = 0x15, + MLX4_DEV_PMC_SUBTYPE_PKEY_TABLE = 0x16, +}; + +/* Port mgmt change event handling */ +enum { + MLX4_EQ_PORT_INFO_MSTR_SM_LID_CHANGE_MASK = 1 << 0, + MLX4_EQ_PORT_INFO_GID_PFX_CHANGE_MASK = 1 << 1, + MLX4_EQ_PORT_INFO_LID_CHANGE_MASK = 1 << 2, + MLX4_EQ_PORT_INFO_CLIENT_REREG_MASK = 1 << 3, + MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK = 1 << 4, +}; + +#define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \ + MLX4_EQ_PORT_INFO_MSTR_SM_LID_CHANGE_MASK) + static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor) { return (major << 32) | (minor << 16) | subminor; @@ -511,6 +531,81 @@ struct mlx4_dev { int num_vfs; }; +struct mlx4_eqe { + u8 reserved1; + u8 type; + u8 reserved2; + u8 subtype; + union { + u32 raw[6]; + struct { + __be32 cqn; + } __packed comp; + struct { + u16 reserved1; + __be16 token; + u32 reserved2; + u8 reserved3[3]; + u8 status; + __be64 out_param; + } __packed cmd; + struct { + __be32 qpn; + } __packed qp; + struct { + __be32 srqn; + } __packed srq; + struct { + __be32 cqn; + u32 reserved1; + u8 reserved2[3]; + u8 syndrome; + } __packed cq_err; + struct { + u32 reserved1[2]; + __be32 port; + } __packed port_change; + struct { + #define COMM_CHANNEL_BIT_ARRAY_SIZE 4 + u32 reserved; + u32 bit_vec[COMM_CHANNEL_BIT_ARRAY_SIZE]; + } __packed comm_channel_arm; + struct { + u8 port; + u8 reserved[3]; + __be64 mac; + } __packed mac_update; + struct { + __be32 slave_id; + } __packed flr_event; + struct { + __be16 current_temperature; + __be16 warning_threshold; + } __packed warming; + struct { + u8 reserved[3]; + u8 port; + union { + struct { + __be16 mstr_sm_lid; + __be16 port_lid; + __be32 changed_attr; + u8 reserved[3]; + u8 mstr_sm_sl; + __be64 gid_prefix; + } __packed port_info; + struct { + __be32 block_ptr; + __be32 tbl_entries_mask; + } __packed tbl_change_info; + } params; + } __packed port_mgmt_change; + } event; + u8 slave_id; + u8 reserved3[2]; + u8 owner; +} __packed; + struct mlx4_init_port_param { int set_guid0; int set_node_guid; @@ -536,6 +631,8 @@ struct mlx4_init_port_param { #define MLX4_INVALID_SLAVE_ID 0xFF +void handle_port_mgmt_change_event(struct work_struct *work); + static inline int mlx4_is_master(struct mlx4_dev *dev) { return dev->flags & MLX4_FLAG_MASTER; diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h index 5f1298b1b5ef..0f509229fb3d 100644 --- a/include/linux/mlx4/driver.h +++ b/include/linux/mlx4/driver.h @@ -42,13 +42,14 @@ enum mlx4_dev_event { MLX4_DEV_EVENT_PORT_UP, MLX4_DEV_EVENT_PORT_DOWN, MLX4_DEV_EVENT_PORT_REINIT, + MLX4_DEV_EVENT_PORT_MGMT_CHANGE, }; struct mlx4_interface { void * (*add) (struct mlx4_dev *dev); void (*remove)(struct mlx4_dev *dev, void *context); void (*event) (struct mlx4_dev *dev, void *context, - enum mlx4_dev_event event, int port); + enum mlx4_dev_event event, unsigned long param); void * (*get_dev)(struct mlx4_dev *dev, void *context, u8 port); struct list_head list; enum mlx4_protocol protocol; -- cgit v1.2.3 From dbf0e4c7257f8d684ec1a3c919853464293de66e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 9 Jul 2012 11:09:21 -0400 Subject: PCI: EHCI: fix crash during suspend on ASUS computers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Quite a few ASUS computers experience a nasty problem, related to the EHCI controllers, when going into system suspend. It was observed that the problem didn't occur if the controllers were not put into the D3 power state before starting the suspend, and commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers) was created to do this. It turned out this approach messed up other computers that didn't have the problem -- it prevented USB wakeup from working. Consequently commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2) was merged; it reverted the earlier commit and added a whitelist of known good board names. Now we know the actual cause of the problem. Thanks to AceLan Kao for tracking it down. According to him, an engineer at ASUS explained that some of their BIOSes contain a bug that was added in an attempt to work around a problem in early versions of Windows. When the computer goes into S3 suspend, the BIOS tries to verify that the EHCI controllers were first quiesced by the OS. Nothing's wrong with this, but the BIOS does it by checking that the PCI COMMAND registers contain 0 without checking the controllers' power state. If the register isn't 0, the BIOS assumes the controller needs to be quiesced and tries to do so. This involves making various MMIO accesses to the controller, which don't work very well if the controller is already in D3. The end result is a system hang or memory corruption. Since the value in the PCI COMMAND register doesn't matter once the controller has been suspended, and since the value will be restored anyway when the controller is resumed, we can work around the BIOS bug simply by setting the register to 0 during system suspend. This patch (as1590) does so and also reverts the second commit mentioned above, which is now unnecessary. In theory we could do this for every PCI device. However to avoid introducing new problems, the patch restricts itself to EHCI host controllers. Finally the affected systems can suspend with USB wakeup working properly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728 Based-on-patch-by: AceLan Kao Signed-off-by: Alan Stern Tested-by: Dâniel Fraga Tested-by: Javier Marcet Tested-by: Andrey Rahmatullin Tested-by: Oleksij Rempel Tested-by: Pavel Pisa Cc: stable Acked-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index fefb4e19bf6a..d8c379dba6ad 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -176,8 +176,6 @@ enum pci_dev_flags { PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2, /* Provide indication device is assigned by a Virtual Machine Manager */ PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4, - /* Device causes system crash if in D3 during S3 sleep */ - PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8, }; enum pci_irq_reroute_variant { -- cgit v1.2.3 From 2aca1172c2f5b27fbc37297574f716c1c15f4153 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 19 Jun 2012 11:21:41 +0300 Subject: net/mlx4_core: Initialize IB port capabilities for all slaves With IB SR-IOV, each slave has its own separate copy of the port capabilities flags. For example, the master can run a subnet manager (which causes the IsSM bit to be set in the master's port capabilities) without affecting the port capabilities seen by the slaves (the IsSM bit will be seen as cleared in the slaves). Also add a static inline mlx4_master_func_num() to enhance readability of the code. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- include/linux/mlx4/device.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 560b2201519f..7fbdc89de495 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -633,6 +633,11 @@ struct mlx4_init_port_param { void handle_port_mgmt_change_event(struct work_struct *work); +static inline int mlx4_master_func_num(struct mlx4_dev *dev) +{ + return dev->caps.function; +} + static inline int mlx4_is_master(struct mlx4_dev *dev) { return dev->flags & MLX4_FLAG_MASTER; -- cgit v1.2.3 From 21cd1fab058671313f7c178b640999fcd0d8de21 Mon Sep 17 00:00:00 2001 From: Jon Brenner Date: Wed, 16 May 2012 10:46:42 -0500 Subject: IIO channel type and modifiers for CCT and RGBC data Add iio channel type and modifiers for Correlated Color Temperature (CCT) and RGBC (red/green/blue/clear) data. Add CCT and RGBC descriptions to documentation. Changes: Revised/condensed RGBC descriptions. Merge and trivial fix done by Jonathan Cameron. Signed-off-by: Jon Brenner Signed-off-by: Jonathan Cameron --- include/linux/iio/types.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index e25040173346..44e397705d7f 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -27,6 +27,7 @@ enum iio_chan_type { IIO_TIMESTAMP, IIO_CAPACITANCE, IIO_ALTVOLTAGE, + IIO_CCT, }; enum iio_modifier { @@ -46,6 +47,10 @@ enum iio_modifier { IIO_MOD_LIGHT_IR, IIO_MOD_ROOT_SUM_SQUARED_X_Y, IIO_MOD_SUM_SQUARED_X_Y_Z, + IIO_MOD_LIGHT_CLEAR, + IIO_MOD_LIGHT_RED, + IIO_MOD_LIGHT_GREEN, + IIO_MOD_LIGHT_BLUE, }; #define IIO_VAL_INT 1 -- cgit v1.2.3 From 8651f97bd951d0bb1c10fa24e3fa3455193f3548 Mon Sep 17 00:00:00 2001 From: Preeti U Murthy Date: Mon, 9 Jul 2012 10:12:56 +0200 Subject: PM / cpuidle: System resume hang fix with cpuidle On certain bios, resume hangs if cpus are allowed to enter idle states during suspend [1]. This was fixed in apci idle driver [2].But intel_idle driver does not have this fix. Thus instead of replicating the fix in both the idle drivers, or in more platform specific idle drivers if needed, the more general cpuidle infrastructure could handle this. A suspend callback in cpuidle_driver could handle this fix. But a cpuidle_driver provides only basic functionalities like platform idle state detection capability and mechanisms to support entry and exit into CPU idle states. All other cpuidle functions are found in the cpuidle generic infrastructure for good reason that all cpuidle drivers, irrepective of their platforms will support these functions. One option therefore would be to register a suspend callback in cpuidle which handles this fix. This could be called through a PM_SUSPEND_PREPARE notifier. But this is too generic a notfier for a driver to handle. Also, ideally the job of cpuidle is not to handle side effects of suspend. It should expose the interfaces which "handle cpuidle 'during' suspend" or any other operation, which the subsystems call during that respective operation. The fix demands that during suspend, no cpus should be allowed to enter deep C-states. The interface cpuidle_uninstall_idle_handler() in cpuidle ensures that. Not just that it also kicks all the cpus which are already in idle out of their idle states which was being done during cpu hotplug through a CPU_DYING_FROZEN callbacks. Now the question arises about when during suspend should cpuidle_uninstall_idle_handler() be called. Since we are dealing with drivers it seems best to call this function during dpm_suspend(). Delaying the call till dpm_suspend_noirq() does no harm, as long as it is before cpu_hotplug_begin() to avoid race conditions with cpu hotpulg operations. In dpm_suspend_noirq(), it would be wise to place this call before suspend_device_irqs() to avoid ugly interactions with the same. Ananlogously, during resume. References: [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674075. [2] http://marc.info/?l=linux-pm&m=133958534231884&w=2 Reported-and-tested-by: Dave Hansen Signed-off-by: Preeti U Murthy Reviewed-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- include/linux/cpuidle.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 524bb6f3b6c4..ca6cdf55eb18 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -145,6 +145,8 @@ extern void cpuidle_unregister_device(struct cpuidle_device *dev); extern void cpuidle_pause_and_lock(void); extern void cpuidle_resume_and_unlock(void); +extern void cpuidle_pause(void); +extern void cpuidle_resume(void); extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); extern int cpuidle_wrap_enter(struct cpuidle_device *dev, @@ -168,6 +170,8 @@ static inline void cpuidle_unregister_device(struct cpuidle_device *dev) { } static inline void cpuidle_pause_and_lock(void) { } static inline void cpuidle_resume_and_unlock(void) { } +static inline void cpuidle_pause(void) { } +static inline void cpuidle_resume(void) { } static inline int cpuidle_enable_device(struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_disable_device(struct cpuidle_device *dev) { } -- cgit v1.2.3 From ad7eee98bef92481581060801bdfd1b25a6106c0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2012 06:18:44 +0000 Subject: etherdevice: introduce eth_broadcast_addr A lot of code has either the memset or an inefficient copy from a static array that contains the all-ones broadcast address. Introduce eth_broadcast_addr() to fill an address with all ones, making the code clearer and allowing us to get rid of some constant arrays. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/etherdevice.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 3d406e0ede6d..98a27cccedfd 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -137,6 +137,17 @@ static inline void random_ether_addr(u8 *addr) addr [0] |= 0x02; /* set local assignment bit (IEEE802) */ } +/** + * eth_broadcast_addr - Assign broadcast address + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Assign the broadcast address to the given address array. + */ +static inline void eth_broadcast_addr(u8 *addr) +{ + memset(addr, 0xff, ETH_ALEN); +} + /** * eth_hw_addr_random - Generate software assigned random Ethernet and * set device flag -- cgit v1.2.3 From fd0ea65d3e675e479e022b6cfc9ebe1864c76afc Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 30 Apr 2012 23:31:57 +0200 Subject: mmc: extend and rename cd-gpio helpers to handle more slot GPIO functions GPIOs can be used in MMC/SD-card slots not only for hotplug detection, but also to implement the write-protection pin. Rename cd-gpio helpers to slot-gpio to make addition of further slot GPIO functions possible. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/cd-gpio.h | 18 ------------------ include/linux/mmc/slot-gpio.h | 18 ++++++++++++++++++ 2 files changed, 18 insertions(+), 18 deletions(-) delete mode 100644 include/linux/mmc/cd-gpio.h create mode 100644 include/linux/mmc/slot-gpio.h (limited to 'include/linux') diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h deleted file mode 100644 index cefaba038ccb..000000000000 --- a/include/linux/mmc/cd-gpio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Generic GPIO card-detect helper header - * - * Copyright (C) 2011, Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef MMC_CD_GPIO_H -#define MMC_CD_GPIO_H - -struct mmc_host; -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio); -void mmc_cd_gpio_free(struct mmc_host *host); - -#endif diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h new file mode 100644 index 000000000000..edfaa3254373 --- /dev/null +++ b/include/linux/mmc/slot-gpio.h @@ -0,0 +1,18 @@ +/* + * Generic GPIO card-detect helper header + * + * Copyright (C) 2011, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MMC_SLOT_GPIO_H +#define MMC_SLOT_GPIO_H + +struct mmc_host; +int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio); +void mmc_gpio_free_cd(struct mmc_host *host); + +#endif -- cgit v1.2.3 From 815e972110052e8da68b5b5298ca2cd69cb7c3c0 Mon Sep 17 00:00:00 2001 From: Nicolas Royer Date: Sun, 1 Jul 2012 19:19:43 +0200 Subject: ARM: AT91SAM9G45: add crypto peripherals MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Nicolas Royer Acked-by: Nicolas Ferre Acked-by: Eric Bénard Tested-by: Eric Bénard Signed-off-by: Herbert Xu --- include/linux/platform_data/atmel-aes.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/platform_data/atmel-aes.h (limited to 'include/linux') diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h new file mode 100644 index 000000000000..e7a1949bad26 --- /dev/null +++ b/include/linux/platform_data/atmel-aes.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_ATMEL_AES_H +#define __LINUX_ATMEL_AES_H + +#include + +/** + * struct aes_dma_data - DMA data for AES + */ +struct aes_dma_data { + struct at_dma_slave txdata; + struct at_dma_slave rxdata; +}; + +/** + * struct aes_platform_data - board-specific AES configuration + * @dma_slave: DMA slave interface to use in data transfers. + */ +struct aes_platform_data { + struct aes_dma_data *dma_slave; +}; + +#endif /* __LINUX_ATMEL_AES_H */ -- cgit v1.2.3 From 475d0094293b51353e342d1198377967dbc48169 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 11 Jul 2012 15:16:37 +1000 Subject: of: Improve prom_update_property() function prom_update_property() currently fails if the property doesn't actually exist yet which isn't what we want. Change to add-or-update instead of update-only, then we can remove a lot duplicated lines. Suggested-by: Grant Likely Signed-off-by: Dong Aisheng Acked-by: Rob Herring Signed-off-by: Benjamin Herrenschmidt --- include/linux/of.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 2ec1083af7ff..b27c87191df2 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -260,8 +260,7 @@ extern int of_machine_is_compatible(const char *compat); extern int prom_add_property(struct device_node* np, struct property* prop); extern int prom_remove_property(struct device_node *np, struct property *prop); extern int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop); + struct property *newprop); #if defined(CONFIG_OF_DYNAMIC) /* For updating the device tree at runtime */ -- cgit v1.2.3 From b6242b9b45e84ef71c59002cd128c3197938cb2f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 10 Jul 2012 03:27:56 -0700 Subject: tcp: Remove tw->tw_peer No longer used. Signed-off-by: David S. Miller --- include/linux/tcp.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 7d3bcedc062a..2de9cf46f9fc 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -506,7 +506,6 @@ struct tcp_timewait_sock { u32 tw_rcv_wnd; u32 tw_ts_recent; long tw_ts_recent_stamp; - struct inet_peer *tw_peer; #ifdef CONFIG_TCP_MD5SIG struct tcp_md5sig_key *tw_md5_key; #endif -- cgit v1.2.3 From 87a50699cb6d169591cc776fb82683a2c77cecac Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 10 Jul 2012 05:06:14 -0700 Subject: rtnetlink: Remove ts/tsage args to rtnl_put_cacheinfo(). Nobody provides non-zero values any longer. Signed-off-by: David S. Miller --- include/linux/rtnetlink.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index ea60b0854109..db71c4ad8624 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -619,8 +619,7 @@ extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, extern void rtnl_set_sk_err(struct net *net, u32 group, int error); extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics); extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, - u32 id, u32 ts, u32 tsage, long expires, - u32 error); + u32 id, long expires, u32 error); extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change); -- cgit v1.2.3 From e1612de9e4cdf375c3cf1c72434ab8abdcb3927e Mon Sep 17 00:00:00 2001 From: Haren Myneni Date: Wed, 11 Jul 2012 15:18:44 +1000 Subject: powerpc: Disable /dev/port interface on systems without an ISA bridge Some power systems do not have legacy ISA devices. So, /dev/port is not a valid interface on these systems. User level tools such as kbdrate is trying to access the device using this interface which is causing the system crash. This patch will fix this issue by not creating this interface on these powerpc systems. Signed-off-by: Haren Myneni Signed-off-by: Benjamin Herrenschmidt --- include/linux/io.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/io.h b/include/linux/io.h index 7fd2d2138bf3..069e4075f872 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -67,4 +67,13 @@ int check_signature(const volatile void __iomem *io_addr, const unsigned char *signature, int length); void devm_ioremap_release(struct device *dev, void *res); +/* + * Some systems do not have legacy ISA devices. + * /dev/port is not a valid interface on these systems. + * So for those archs, should define the following symbol. + */ +#ifndef arch_has_dev_port +#define arch_has_dev_port() (1) +#endif + #endif /* _LINUX_IO_H */ -- cgit v1.2.3 From 48ee3569f31d91084dc694fef5517eb782428083 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 11 Jul 2012 02:39:24 -0700 Subject: ipv6: Move ipv6 twsk accessors outside of CONFIG_IPV6 ifdefs. Fixes build when ipv6 is disabled. Reported-by: Fengguang Wu Signed-off-by: David S. Miller --- include/linux/ipv6.h | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 8260ef779762..bc6c8fd8ed01 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -410,6 +410,22 @@ struct tcp6_sock { extern int inet6_sk_rebuild_header(struct sock *sk); +struct inet6_timewait_sock { + struct in6_addr tw_v6_daddr; + struct in6_addr tw_v6_rcv_saddr; +}; + +struct tcp6_timewait_sock { + struct tcp_timewait_sock tcp6tw_tcp; + struct inet6_timewait_sock tcp6tw_inet6; +}; + +static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk) +{ + return (struct inet6_timewait_sock *)(((u8 *)sk) + + inet_twsk(sk)->tw_ipv6_offset); +} + #if IS_ENABLED(CONFIG_IPV6) static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk) { @@ -459,28 +475,12 @@ static inline void inet_sk_copy_descendant(struct sock *sk_to, #define __ipv6_only_sock(sk) (inet6_sk(sk)->ipv6only) #define ipv6_only_sock(sk) ((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk)) -struct inet6_timewait_sock { - struct in6_addr tw_v6_daddr; - struct in6_addr tw_v6_rcv_saddr; -}; - -struct tcp6_timewait_sock { - struct tcp_timewait_sock tcp6tw_tcp; - struct inet6_timewait_sock tcp6tw_inet6; -}; - static inline u16 inet6_tw_offset(const struct proto *prot) { return prot->twsk_prot->twsk_obj_size - sizeof(struct inet6_timewait_sock); } -static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk) -{ - return (struct inet6_timewait_sock *)(((u8 *)sk) + - inet_twsk(sk)->tw_ipv6_offset); -} - static inline struct in6_addr *__inet6_rcv_saddr(const struct sock *sk) { return likely(sk->sk_state != TCP_TIME_WAIT) ? -- cgit v1.2.3 From 0cd76dd13bdd2f7f02a2dc931e808e92b191082f Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 26 Jan 2012 19:40:52 +0100 Subject: iommu: Add domain-attribute handlers This patch introduces an extension to the iommu-api to get and set attributes for an iommu_domain. Two functions are introduced for this: * iommu_domain_get_attr() * iommu_domain_set_attr() These functions will be used to make the iommu-api suitable for GART-like IOMMUs and to implement hardware-specifc api-extensions. Signed-off-by: Joerg Roedel --- include/linux/iommu.h | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 450293f6d68b..0eef096183e8 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -47,6 +47,10 @@ struct iommu_domain { #define IOMMU_CAP_CACHE_COHERENCY 0x1 #define IOMMU_CAP_INTR_REMAP 0x2 /* isolates device intrs */ +enum iommu_attr { + DOMAIN_ATTR_MAX, +}; + #ifdef CONFIG_IOMMU_API /** @@ -59,7 +63,8 @@ struct iommu_domain { * @unmap: unmap a physically contiguous memory region from an iommu domain * @iova_to_phys: translate iova to physical address * @domain_has_cap: domain capabilities query - * @commit: commit iommu domain + * @domain_get_attr: Query domain attributes + * @domain_set_attr: Change domain attributes * @pgsize_bitmap: bitmap of supported page sizes */ struct iommu_ops { @@ -76,6 +81,10 @@ struct iommu_ops { int (*domain_has_cap)(struct iommu_domain *domain, unsigned long cap); int (*device_group)(struct device *dev, unsigned int *groupid); + int (*domain_get_attr)(struct iommu_domain *domain, + enum iommu_attr attr, void *data); + int (*domain_set_attr)(struct iommu_domain *domain, + enum iommu_attr attr, void *data); unsigned long pgsize_bitmap; }; @@ -99,6 +108,11 @@ extern void iommu_set_fault_handler(struct iommu_domain *domain, iommu_fault_handler_t handler, void *token); extern int iommu_device_group(struct device *dev, unsigned int *groupid); +extern int iommu_domain_get_attr(struct iommu_domain *domain, enum iommu_attr, + void *data); +extern int iommu_domain_set_attr(struct iommu_domain *domain, enum iommu_attr, + void *data); + /** * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework * @domain: the iommu domain where the fault has happened @@ -202,6 +216,18 @@ static inline int iommu_device_group(struct device *dev, unsigned int *groupid) return -ENODEV; } +static inline int iommu_domain_get_attr(struct iommu_domain *domain, + enum iommu_attr attr, void *data) +{ + return -EINVAL; +} + +static inline int iommu_domain_set_attr(struct iommu_domain *domain, + enum iommu_attr attr, void *data) +{ + return -EINVAL; +} + #endif /* CONFIG_IOMMU_API */ #endif /* __LINUX_IOMMU_H */ -- cgit v1.2.3 From 0ff64f80e075ae036a4c80c7d7752b1e07fed792 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 26 Jan 2012 19:40:53 +0100 Subject: iommu/amd: Implement DOMAIN_ATTR_GEOMETRY attribute Implement the attribute itself and add the code for the AMD IOMMU driver. Signed-off-by: Joerg Roedel --- include/linux/iommu.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 0eef096183e8..f7df4aa527f3 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -37,11 +37,18 @@ struct iommu_domain; typedef int (*iommu_fault_handler_t)(struct iommu_domain *, struct device *, unsigned long, int, void *); +struct iommu_domain_geometry { + dma_addr_t aperture_start; /* First address that can be mapped */ + dma_addr_t aperture_end; /* Last address that can be mapped */ + bool force_aperture; /* DMA only allowed in mappable range? */ +}; + struct iommu_domain { struct iommu_ops *ops; void *priv; iommu_fault_handler_t handler; void *handler_token; + struct iommu_domain_geometry geometry; }; #define IOMMU_CAP_CACHE_COHERENCY 0x1 @@ -49,6 +56,7 @@ struct iommu_domain { enum iommu_attr { DOMAIN_ATTR_MAX, + DOMAIN_ATTR_GEOMETRY, }; #ifdef CONFIG_IOMMU_API -- cgit v1.2.3 From c5c4bdf02e518a281b229ae0891b346919e2d291 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 5 Jul 2012 09:41:22 -0700 Subject: USB: Remove unused LPM variable. hub_initiated_lpm_disable_count is not used by any code, so remove it. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- include/linux/usb.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index d4f9de1acd45..dea2f0de063e 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -561,7 +561,6 @@ struct usb_device { struct usb3_lpm_parameters u1_params; struct usb3_lpm_parameters u2_params; unsigned lpm_disable_count; - unsigned hub_initiated_lpm_disable_count; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) -- cgit v1.2.3 From f74631e3426474183389e55f703797bd965cd356 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 25 Jun 2012 12:08:08 -0700 Subject: USB: Enable Latency Tolerance Messaging (LTM). USB 3.0 devices may optionally support a new feature called Latency Tolerance Messaging. If both the xHCI host controller and the device support LTM, it should be turned on in order to give the system hardware a better clue about the latency tolerance values of its PCI devices. Once a Set Feature request to enable LTM is received, the USB 3.0 device will begin to send LTM updates as its buffers fill or empty, and it can tolerate more or less latency. The USB 3.0 spec, section C.4.2 says that LTM should be disabled just before the device is placed into suspend. Then the device will send an updated LTM notification, so that the system doesn't think it should remain in an active state in order to satisfy the latency requirements of the suspended device. The Set and Clear Feature LTM enable command can only be sent to a configured device. The device will respond with an error if that command is sent while it is in the Default or Addressed state. Make sure to check udev->actconfig in usb_enable_ltm() and usb_disable_ltm(), and don't send those commands when the device is unconfigured. LTM should be enabled once a new configuration is installed in usb_set_configuration(). If we end up sending duplicate Set Feature LTM Enable commands on a switch from one installed configuration to another configuration, that should be harmless. Make sure that LTM is disabled before the device is unconfigured in usb_disable_device(). If no drivers are bound to the device, it doesn't make sense to allow the device to control the latency tolerance of the xHCI host controller. Signed-off-by: Sarah Sharp --- include/linux/usb.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index dea2f0de063e..f29831bad235 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -633,6 +633,9 @@ extern void usb_enable_lpm(struct usb_device *udev); extern int usb_unlocked_disable_lpm(struct usb_device *udev); extern void usb_unlocked_enable_lpm(struct usb_device *udev); +extern int usb_disable_ltm(struct usb_device *udev); +extern void usb_enable_ltm(struct usb_device *udev); + /*-------------------------------------------------------------------------*/ /* for drivers using iso endpoints */ -- cgit v1.2.3 From 024f117c2f3c4bb5df6e6696b709e0f3ed7e5dbb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 5 Jul 2012 17:17:24 -0700 Subject: USB: Add a sysfs file to show LTM capabilities. USB 3.0 devices can optionally support Latency Tolerance Messaging (LTM). Add a new sysfs file in the device directory to show whether a device is LTM capable. This file will be present for both USB 2.0 and USB 3.0 devices. Signed-off-by: Sarah Sharp --- include/linux/usb.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index f29831bad235..f8506ed0f97b 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -636,6 +636,14 @@ extern void usb_unlocked_enable_lpm(struct usb_device *udev); extern int usb_disable_ltm(struct usb_device *udev); extern void usb_enable_ltm(struct usb_device *udev); +static inline bool usb_device_supports_ltm(struct usb_device *udev) +{ + if (udev->speed != USB_SPEED_SUPER || !udev->bos || !udev->bos->ss_cap) + return false; + return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT; +} + + /*-------------------------------------------------------------------------*/ /* for drivers using iso endpoints */ -- cgit v1.2.3 From 781d0f46d81e2c26c70649903b503bcfe817efc8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 5 Jul 2012 12:19:19 +0100 Subject: irq_domain: Standardise legacy/linear domain selection A large proportion of interrupt controllers that support legacy mappings do so because non-DT systems need to use fixed IRQ numbers when registering devices via buses but can otherwise use a linear mapping. The interrupt controller itself typically is not affected by the mapping used and best practice is to use a linear mapping where possible so drivers frequently select at runtime depending on if a legacy range has been allocated to them. Standardise this behaviour by providing irq_domain_register_simple() which will allocate a linear mapping unless a positive first_irq is provided in which case it will fall back to a legacy mapping. This helps make best practice for irq_domain adoption clearer. Signed-off-by: Mark Brown Signed-off-by: Grant Likely --- include/linux/irqdomain.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 5abb533eb8eb..17b60be30fff 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -112,6 +112,11 @@ struct irq_domain { }; #ifdef CONFIG_IRQ_DOMAIN +struct irq_domain *irq_domain_add_simple(struct device_node *of_node, + unsigned int size, + unsigned int first_irq, + const struct irq_domain_ops *ops, + void *host_data); struct irq_domain *irq_domain_add_legacy(struct device_node *of_node, unsigned int size, unsigned int first_irq, -- cgit v1.2.3 From 98aa468e045a0091a7c34d9f5205a629634fabf4 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 17 Jun 2012 16:17:04 -0600 Subject: irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring --- include/linux/irqdomain.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux') diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 17b60be30fff..eab8a0e60b8e 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -149,12 +149,31 @@ static inline struct irq_domain *irq_domain_add_legacy_isa( extern void irq_domain_remove(struct irq_domain *host); +extern int irq_domain_associate_many(struct irq_domain *domain, + unsigned int irq_base, + irq_hw_number_t hwirq_base, int count); +static inline int irq_domain_associate(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + return irq_domain_associate_many(domain, irq, hwirq, 1); +} + extern unsigned int irq_create_mapping(struct irq_domain *host, irq_hw_number_t hwirq); extern void irq_dispose_mapping(unsigned int virq); extern unsigned int irq_find_mapping(struct irq_domain *host, irq_hw_number_t hwirq); extern unsigned int irq_create_direct_mapping(struct irq_domain *host); +extern int irq_create_strict_mappings(struct irq_domain *domain, + unsigned int irq_base, + irq_hw_number_t hwirq_base, int count); + +static inline int irq_create_identity_mapping(struct irq_domain *host, + irq_hw_number_t hwirq) +{ + return irq_create_strict_mappings(host, hwirq, hwirq, 1); +} + extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq, irq_hw_number_t hwirq); extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host, -- cgit v1.2.3 From d6b0d1f7058f7cf818138cd7fd116dca3f3576d9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:37 -0700 Subject: irqdomain: Eliminate dedicated radix lookup functions In preparation to remove the slow revmap path, eliminate the public radix revmap lookup functions. This simplifies the code and makes the slowpath removal patch a lot simpler. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring --- include/linux/irqdomain.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index eab8a0e60b8e..0d5b17bf5e51 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -174,10 +174,6 @@ static inline int irq_create_identity_mapping(struct irq_domain *host, return irq_create_strict_mappings(host, hwirq, hwirq, 1); } -extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq, - irq_hw_number_t hwirq); -extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host, - irq_hw_number_t hwirq); extern unsigned int irq_linear_revmap(struct irq_domain *host, irq_hw_number_t hwirq); -- cgit v1.2.3 From 6751ed65dc6642af64f7b8a440a75563c8aab7ae Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 11 Jul 2012 10:20:47 -0700 Subject: x86/mce: Fix siginfo_t->si_addr value for non-recoverable memory faults In commit dad1743e5993f1 ("x86/mce: Only restart instruction after machine check recovery if it is safe") we fixed mce_notify_process() to force a signal to the current process if it was not restartable (RIPV bit not set in MCG_STATUS). But doing it here means that the process doesn't get told the virtual address of the fault via siginfo_t->si_addr. This would prevent application level recovery from the fault. Make a new MF_MUST_KILL flag bit for memory_failure() et al. to use so that we will provide the right information with the signal. Signed-off-by: Tony Luck Acked-by: Borislav Petkov Cc: stable@kernel.org # 3.4+ --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index b36d08ce5c57..f9f279cf5b1b 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1591,6 +1591,7 @@ void vmemmap_populate_print_last(void); enum mf_flags { MF_COUNT_INCREASED = 1 << 0, MF_ACTION_REQUIRED = 1 << 1, + MF_MUST_KILL = 1 << 2, }; extern int memory_failure(unsigned long pfn, int trapno, int flags); extern void memory_failure_queue(unsigned long pfn, int trapno, int flags); -- cgit v1.2.3 From 396f2feb05d7cc5549c611c05abfb4108cd1c6d6 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 19 Jun 2012 11:21:42 +0300 Subject: mlx4_core: Implement mechanism for reserved Q_Keys The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- include/linux/mlx4/device.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 7fbdc89de495..c30a314e095c 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -56,6 +56,13 @@ enum { MLX4_MAX_PORTS = 2 }; +/* base qkey for use in sriov tunnel-qp/proxy-qp communication. + * These qkeys must not be allowed for general use. This is a 64k range, + * and to test for violation, we use the mask (protect against future chg). + */ +#define MLX4_RESERVED_QKEY_BASE (0xFFFF0000) +#define MLX4_RESERVED_QKEY_MASK (0xFFFF0000) + enum { MLX4_BOARD_ID_LEN = 64 }; @@ -293,6 +300,8 @@ struct mlx4_caps { int max_qp_init_rdma; int max_qp_dest_rdma; int sqp_start; + u32 base_sqpn; + u32 base_tunnel_sqpn; int num_srqs; int max_srq_wqes; int max_srq_sge; @@ -772,4 +781,6 @@ int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port); int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx); void mlx4_counter_free(struct mlx4_dev *dev, u32 idx); +int mlx4_get_parav_qkey(struct mlx4_dev *dev, u32 qpn, u32 *qkey); + #endif /* MLX4_DEVICE_H */ -- cgit v1.2.3 From 6634961c14d38ef64ec284c07aecb03d3dd03b4a Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 19 Jun 2012 11:21:44 +0300 Subject: mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them To allow easy paravirtualization of P_Key and GID table sizes, keep paravirtualized sizes in mlx4_dev->caps, but save the actual physical sizes from FW in struct: mlx4_dev->phys_cap. In addition, in SR-IOV mode, do the following: 1. Reduce reported P_Key table size by 1. This is done to reserve the highest P_Key index for internal use, for declaring an invalid P_Key in P_Key paravirtualization. We require a P_Key index which always contain an invalid P_Key value for this purpose (i.e., one which cannot be modified by the subnet manager). The way to do this is to reduce the P_Key table size reported to the subnet manager by 1, so that it will not attempt to access the P_Key at index #127. 2. Paravirtualize the GID table size to 1. Thus, each guest sees only a single GID (at its paravirtualized index 0). In addition, since we are paravirtualizing the GID table size to 1, we add paravirtualization of the master GID event here (i.e., we do not do ib_dispatch_event() for the GUID change event on the master, since its (only) GUID never changes). Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- include/linux/mlx4/device.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index c30a314e095c..441caf1a497d 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -268,6 +268,8 @@ static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor) } struct mlx4_phys_caps { + u32 gid_phys_table_len[MLX4_MAX_PORTS + 1]; + u32 pkey_phys_table_len[MLX4_MAX_PORTS + 1]; u32 num_phys_eqs; }; -- cgit v1.2.3 From 650cef38263c0f4c8970265354432be154eef425 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 9 Jul 2012 22:03:10 +0200 Subject: bcma: add PMU clock support for BCM4706 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Hauke Mehrtens Tested-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 12975eac403f..fbd0d49dc4d2 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -88,6 +88,11 @@ #define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 #define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 #define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ +#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ +#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ +#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ +#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -280,6 +285,15 @@ /* 4706 PMU */ #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 +#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ +#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 +#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 -- cgit v1.2.3 From d9c2ede63c74048dfddbb129c59ac01176b0ab71 Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Fri, 6 Jul 2012 21:31:56 +0200 Subject: sunrpc/cache.h: fix coding style Neaten code style in get_int(). Also use sizeof() instead of hard coded number as suggested by Joe Perches . Cc: Joe Perches Signed-off-by: Eldad Zack Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/cache.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index f5fd6160dbca..6def1f6cc269 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -219,11 +219,17 @@ static inline int get_int(char **bpp, int *anint) char buf[50]; char *ep; int rv; - int len = qword_get(bpp, buf, 50); - if (len < 0) return -EINVAL; - if (len ==0) return -ENOENT; + int len = qword_get(bpp, buf, sizeof(buf)); + + if (len < 0) + return -EINVAL; + if (len == 0) + return -ENOENT; + rv = simple_strtol(buf, &ep, 0); - if (*ep) return -EINVAL; + if (*ep) + return -EINVAL; + *anint = rv; return 0; } -- cgit v1.2.3 From bbf43dc888833ac0539e437dbaeb28bfd4fbab9f Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Fri, 6 Jul 2012 21:31:57 +0200 Subject: sunrpc/cache.h: replace simple_strtoul This patch replaces the usage of simple_strtoul with kstrtoint in get_int(), since the simple_str* family doesn't account for overflow and is deprecated. Also, in this specific case, the long from strtol is silently converted to an int by the caller. As Joe Perches suggested, this patch also removes the redundant temporary variable rv, since kstrtoint() will not write to anint unless it's successful. Cc: Joe Perches Signed-off-by: Eldad Zack Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/cache.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 6def1f6cc269..af42596a82f9 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -217,8 +217,6 @@ extern int qword_get(char **bpp, char *dest, int bufsize); static inline int get_int(char **bpp, int *anint) { char buf[50]; - char *ep; - int rv; int len = qword_get(bpp, buf, sizeof(buf)); if (len < 0) @@ -226,11 +224,9 @@ static inline int get_int(char **bpp, int *anint) if (len == 0) return -ENOENT; - rv = simple_strtol(buf, &ep, 0); - if (*ep) + if (kstrtoint(buf, 0, anint)) return -EINVAL; - *anint = rv; return 0; } -- cgit v1.2.3 From f55a6faa384304c89cfef162768e88374d3312cb Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 10 Jul 2012 18:43:19 -0400 Subject: hrtimer: Provide clock_was_set_delayed() clock_was_set() cannot be called from hard interrupt context because it calls on_each_cpu(). For fixing the widely reported leap seconds issue it is necessary to call it from hard interrupt context, i.e. the timer tick code, which does the timekeeping updates. Provide a new function which denotes it in the hrtimer cpu base structure of the cpu on which it is called and raise the hrtimer softirq. We then execute the clock_was_set() notificiation from softirq context in run_hrtimer_softirq(). The hrtimer softirq is rarely used, so polling the flag there is not a performance issue. [ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get rid of all this ifdeffery ASAP ] Signed-off-by: John Stultz Reported-by: Jan Engelhardt Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra Acked-by: Prarit Bhargava Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1341960205-56738-2-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index fd0dc30c9f15..c9ec9400ee5b 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -165,6 +165,7 @@ enum hrtimer_base_type { * @lock: lock protecting the base and associated clock bases * and timers * @active_bases: Bitfield to mark bases with active timers + * @clock_was_set: Indicates that clock was set from irq context. * @expires_next: absolute time of the next event which was scheduled * via clock_set_next_event() * @hres_active: State of high resolution mode @@ -177,7 +178,8 @@ enum hrtimer_base_type { */ struct hrtimer_cpu_base { raw_spinlock_t lock; - unsigned long active_bases; + unsigned int active_bases; + unsigned int clock_was_set; #ifdef CONFIG_HIGH_RES_TIMERS ktime_t expires_next; int hres_active; @@ -286,6 +288,8 @@ extern void hrtimer_peek_ahead_timers(void); # define MONOTONIC_RES_NSEC HIGH_RES_NSEC # define KTIME_MONOTONIC_RES KTIME_HIGH_RES +extern void clock_was_set_delayed(void); + #else # define MONOTONIC_RES_NSEC LOW_RES_NSEC @@ -306,6 +310,9 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer) { return 0; } + +static inline void clock_was_set_delayed(void) { } + #endif extern void clock_was_set(void); -- cgit v1.2.3 From f6c06abfb3972ad4914cef57d8348fcb2932bc3b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 10 Jul 2012 18:43:24 -0400 Subject: timekeeping: Provide hrtimer update function To finally fix the infamous leap second issue and other race windows caused by functions which change the offsets between the various time bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a function which atomically gets the current monotonic time and updates the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic overhead. The previous patch which provides ktime_t offsets allows us to make this function almost as cheap as ktime_get() which is going to be replaced in hrtimer_interrupt(). Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra Acked-by: Prarit Bhargava Cc: stable@vger.kernel.org Signed-off-by: John Stultz Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index c9ec9400ee5b..cc07d2777bbe 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -327,6 +327,7 @@ extern ktime_t ktime_get(void); extern ktime_t ktime_get_real(void); extern ktime_t ktime_get_boottime(void); extern ktime_t ktime_get_monotonic_offset(void); +extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot); DECLARE_PER_CPU(struct tick_device, tick_cpu_device); -- cgit v1.2.3 From 357c3f0a6c7613f7230fcaf1eb16190ed2a4b0af Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 29 Jun 2012 19:06:32 +0530 Subject: clk: Add support for rate table based dividers Some divider clks do not have any obvious relationship between the divider and the value programmed in the register. For instance, say a value of 1 could signify divide by 6 and a value of 2 could signify divide by 4 etc. Also there are dividers where not all values possible based on the bitfield width are valid. For instance a 3 bit wide bitfield can be used to program a value from 0 to 7. However its possible that only 0 to 4 are valid values. All these cases need the platform code to pass a simple table of divider/value tuple, so the framework knows the exact value to be written based on the divider calculation and can also do better error checking. This patch adds support for such rate table based dividers and as part of the support adds a new registration function 'clk_register_divider_table()' and a new macro for static definition 'DEFINE_CLK_DIVIDER_TABLE'. Signed-off-by: Rajendra Nayak Signed-off-by: Mike Turquette --- include/linux/clk-private.h | 20 ++++++++++++++++++-- include/linux/clk-provider.h | 12 ++++++++++++ 2 files changed, 30 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index eb3f84bc5325..cc9972d1429c 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -103,9 +103,9 @@ struct clk { DEFINE_CLK(_name, clk_gate_ops, _flags, \ _name##_parent_names, _name##_parents); -#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ +#define _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ _flags, _reg, _shift, _width, \ - _divider_flags, _lock) \ + _divider_flags, _table, _lock) \ static struct clk _name; \ static const char *_name##_parent_names[] = { \ _parent_name, \ @@ -121,11 +121,27 @@ struct clk { .shift = _shift, \ .width = _width, \ .flags = _divider_flags, \ + .table = _table, \ .lock = _lock, \ }; \ DEFINE_CLK(_name, clk_divider_ops, _flags, \ _name##_parent_names, _name##_parents); +#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, _lock) \ + _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, NULL, _lock) + +#define DEFINE_CLK_DIVIDER_TABLE(_name, _parent_name, \ + _parent_ptr, _flags, _reg, \ + _shift, _width, _divider_flags, \ + _table, _lock) \ + _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, _table, _lock) \ + #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ _reg, _shift, _width, \ _mux_flags, _lock) \ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 4a0b483986c3..79caee9f1489 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -203,6 +203,11 @@ struct clk *clk_register_gate(struct device *dev, const char *name, void __iomem *reg, u8 bit_idx, u8 clk_gate_flags, spinlock_t *lock); +struct clk_div_table { + unsigned int val; + unsigned int div; +}; + /** * struct clk_divider - adjustable divider clock * @@ -210,6 +215,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name, * @reg: register containing the divider * @shift: shift to the divider bit field * @width: width of the divider bit field + * @table: array of value/divider pairs, last entry should have div = 0 * @lock: register lock * * Clock with an adjustable divider affecting its output frequency. Implements @@ -229,6 +235,7 @@ struct clk_divider { u8 shift; u8 width; u8 flags; + const struct clk_div_table *table; spinlock_t *lock; }; @@ -240,6 +247,11 @@ struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags, spinlock_t *lock); +struct clk *clk_register_divider_table(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, const struct clk_div_table *table, + spinlock_t *lock); /** * struct clk_mux - multiplexer clock -- cgit v1.2.3 From f7d8caadfd2813cbada82ce9041b13c38e8e5282 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 1 Jun 2012 14:02:47 +0530 Subject: clk: Add CLK_IS_BASIC flag to identify basic clocks Most platforms end up using a mix of basic clock types and some which use clk_hw_foo struct for filling in custom platform information when the clocks don't fit into basic types supported. In platform code, its useful to know if a clock is using a basic type or clk_hw_foo, which helps platforms know if they can safely use to_clk_hw_foo to derive the clk_hw_foo pointer from clk_hw. Mark all basic clocks with a CLK_IS_BASIC flag. Signed-off-by: Rajendra Nayak Signed-off-by: Mike Turquette --- include/linux/clk-private.h | 2 +- include/linux/clk-provider.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index cc9972d1429c..9c7f5807824b 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -64,7 +64,7 @@ struct clk { .parent_names = _parent_names, \ .num_parents = ARRAY_SIZE(_parent_names), \ .parents = _parents, \ - .flags = _flags, \ + .flags = _flags | CLK_IS_BASIC, \ } #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 79caee9f1489..0236f58f3e65 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -25,6 +25,7 @@ #define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ +#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ struct clk_hw; -- cgit v1.2.3 From dc4cd941c900fda27f0146ab615122426229de73 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 14 May 2012 15:12:42 +0100 Subject: clk: Constify struct clk_init_data Allow drivers to declare their clk_init_data const, the framework really shouldn't be modifying the data. Signed-off-by: Mark Brown Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 0236f58f3e65..06ad617664a2 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -144,7 +144,7 @@ struct clk_init_data { */ struct clk_hw { struct clk *clk; - struct clk_init_data *init; + const struct clk_init_data *init; }; /* -- cgit v1.2.3 From 50667d63085af108f625c83102430c1d74931d78 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 19 Jun 2012 23:44:25 +0200 Subject: ARM: u300: convert to common clock This converts the U300 clock implementation over to use the common struct clk and moves the implementation down into drivers/clk. Since VCO isn't used in tree it was removed, it's not hard to put it back in if need be. Signed-off-by: Linus Walleij [mturquette@linaro.org: trivial Makefile conflict] Signed-off-by: Mike Turquette --- include/linux/platform_data/clk-u300.h | 1 + 1 file changed, 1 insertion(+) create mode 100644 include/linux/platform_data/clk-u300.h (limited to 'include/linux') diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h new file mode 100644 index 000000000000..8429e73911a1 --- /dev/null +++ b/include/linux/platform_data/clk-u300.h @@ -0,0 +1 @@ +void __init u300_clk_init(void __iomem *base); -- cgit v1.2.3 From d8adde17e5f858427504725218c56aef90e90fc7 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Wed, 11 Jul 2012 14:01:52 -0700 Subject: memory hotplug: fix invalid memory access caused by stale kswapd pointer kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by: Xishi Qiu Signed-off-by: Jiang Liu Acked-by: KAMEZAWA Hiroyuki Acked-by: KOSAKI Motohiro Acked-by: Mel Gorman Acked-by: David Rientjes Reviewed-by: Minchan Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 2427706f78b4..68c569fcbb66 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -694,7 +694,7 @@ typedef struct pglist_data { range, including holes */ int node_id; wait_queue_head_t kswapd_wait; - struct task_struct *kswapd; + struct task_struct *kswapd; /* Protected by lock_memory_hotplug() */ int kswapd_max_order; enum zone_type classzone_idx; } pg_data_t; -- cgit v1.2.3 From 99ab7b19440a72ebdf225f99b20f8ef40decee86 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 11 Jul 2012 14:02:53 -0700 Subject: mm: sparse: fix usemap allocation above node descriptor section After commit f5bf18fa22f8 ("bootmem/sparsemem: remove limit constraint in alloc_bootmem_section"), usemap allocations may easily be placed outside the optimal section that holds the node descriptor, even if there is space available in that section. This results in unnecessary hotplug dependencies that need to have the node unplugged before the section holding the usemap. The reason is that the bootmem allocator doesn't guarantee a linear search starting from the passed allocation goal but may start out at a much higher address absent an upper limit. Fix this by trying the allocation with the limit at the section end, then retry without if that fails. This keeps the fix from f5bf18fa22f8 of not panicking if the allocation does not fit in the section, but still makes sure to try to stay within the section at first. Signed-off-by: Yinghai Lu Signed-off-by: Johannes Weiner Cc: [3.3.x, 3.4.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/bootmem.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 324fe08ea3b1..6d6795d46a75 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -91,6 +91,11 @@ extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal); +void *___alloc_bootmem_node_nopanic(pg_data_t *pgdat, + unsigned long size, + unsigned long align, + unsigned long goal, + unsigned long limit); extern void *__alloc_bootmem_low(unsigned long size, unsigned long align, unsigned long goal); -- cgit v1.2.3 From 29f6738609e40227dabcc63bfb3b84b3726a75bd Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 11 Jul 2012 14:02:56 -0700 Subject: memblock: free allocated memblock_reserved_regions later memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[] [] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin Acked-by: Tejun Heo Cc: Benjamin Herrenschmidt Signed-off-by: Yinghai Lu Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memblock.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memblock.h b/include/linux/memblock.h index a6bb10235148..19dc455b4f3d 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -50,9 +50,7 @@ phys_addr_t memblock_find_in_range_node(phys_addr_t start, phys_addr_t end, phys_addr_t size, phys_addr_t align, int nid); phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end, phys_addr_t size, phys_addr_t align); -int memblock_free_reserved_regions(void); -int memblock_reserve_reserved_regions(void); - +phys_addr_t get_allocated_memblock_reserved_regions_info(phys_addr_t *addr); void memblock_allow_resize(void); int memblock_add_node(phys_addr_t base, phys_addr_t size, int nid); int memblock_add(phys_addr_t base, phys_addr_t size); -- cgit v1.2.3 From a613163dff04cbfcb7d66b06ef4a5f65498ee59b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 11 Jun 2012 17:33:12 +0200 Subject: ARM: integrator: convert to common clock This converts the Integrator platform to use common clock and the ICST driver. Since from this point not all ARM reference platforms use the clock, we define CONFIG_PLAT_VERSATILE_CLOCK and select it for all platforms except the Integrator. Open issue: I could not use the .init_early() field of the machine descriptor to initialize the clocks, but had to move them to .init_irq(), so presumably .init_early() is so early that common clock is not up, and .init_machine() is too late since it's needed for the clockevent/clocksource initialization. Any suggestions on how to solve this is very welcome. Cc: Russell King Signed-off-by: Linus Walleij [mturquette@linaro.org: use 'select' instead of versatile Kconfig] Signed-off-by: Mike Turquette --- include/linux/platform_data/clk-integrator.h | 1 + 1 file changed, 1 insertion(+) create mode 100644 include/linux/platform_data/clk-integrator.h (limited to 'include/linux') diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h new file mode 100644 index 000000000000..83fe9c283bb8 --- /dev/null +++ b/include/linux/platform_data/clk-integrator.h @@ -0,0 +1 @@ +void integrator_clk_init(bool is_cp); -- cgit v1.2.3 From 766e6a4ec602d0c107553b91b3434fe9c03474f4 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 9 Apr 2012 14:50:06 -0500 Subject: clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely Signed-off-by: Rob Herring Reviewed-by: Shawn Guo Cc: Sascha Hauer Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 14 ++++++++++++++ include/linux/clk.h | 19 +++++++++++++++++++ 2 files changed, 33 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 06ad617664a2..7c9c691102b5 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -347,5 +347,19 @@ void __clk_unprepare(struct clk *clk); void __clk_reparent(struct clk *clk, struct clk *new_parent); unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); +struct of_device_id; + +typedef void (*of_clk_init_cb_t)(struct device_node *); + +int of_clk_add_provider(struct device_node *np, + struct clk *(*clk_src_get)(struct of_phandle_args *args, + void *data), + void *data); +void of_clk_del_provider(struct device_node *np); +struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, + void *data); +const char *of_clk_get_parent_name(struct device_node *np, int index); +void of_clk_init(const struct of_device_id *matches); + #endif /* CONFIG_COMMON_CLK */ #endif /* CLK_PROVIDER_H */ diff --git a/include/linux/clk.h b/include/linux/clk.h index ad5c43e8ae8a..8b70342e7e0b 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -310,4 +310,23 @@ struct clk *clk_get_sys(const char *dev_id, const char *con_id); int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, struct device *dev); +struct device_node; +struct of_phandle_args; + +#ifdef CONFIG_OF +struct clk *of_clk_get(struct device_node *np, int index); +struct clk *of_clk_get_by_name(struct device_node *np, const char *name); +struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec); +#else +static inline struct clk *of_clk_get(struct device_node *np, int index) +{ + return NULL; +} +static inline struct clk *of_clk_get_by_name(struct device_node *np, + const char *name) +{ + return NULL; +} +#endif + #endif -- cgit v1.2.3 From 015ba40246497ae02a5f644d4c8adfec76d9b75c Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 7 Apr 2012 21:39:39 -0500 Subject: clk: add DT fixed-clock binding support Add support for DT "fixed-clock" binding to the common fixed rate clock support. Signed-off-by: Grant Likely [Rob Herring] Rework and move into common clock infrastructure Signed-off-by: Rob Herring Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 7c9c691102b5..77335fac943e 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -172,6 +172,8 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned long fixed_rate); +void of_fixed_clk_setup(struct device_node *np); + /** * struct clk_gate - gating clock * -- cgit v1.2.3 From 46d3ceabd8d98ed0ad10f20c595ca784e34786c5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 11 Jul 2012 05:50:31 +0000 Subject: tcp: TCP Small Queues This introduce TSQ (TCP Small Queues) TSQ goal is to reduce number of TCP packets in xmit queues (qdisc & device queues), to reduce RTT and cwnd bias, part of the bufferbloat problem. sk->sk_wmem_alloc not allowed to grow above a given limit, allowing no more than ~128KB [1] per tcp socket in qdisc/dev layers at a given time. TSO packets are sized/capped to half the limit, so that we have two TSO packets in flight, allowing better bandwidth use. As a side effect, setting the limit to 40000 automatically reduces the standard gso max limit (65536) to 40000/2 : It can help to reduce latencies of high prio packets, having smaller TSO packets. This means we divert sock_wfree() to a tcp_wfree() handler, to queue/send following frames when skb_orphan() [2] is called for the already queued skbs. Results on my dev machines (tg3/ixgbe nics) are really impressive, using standard pfifo_fast, and with or without TSO/GSO. Without reduction of nominal bandwidth, we have reduction of buffering per bulk sender : < 1ms on Gbit (instead of 50ms with TSO) < 8ms on 100Mbit (instead of 132 ms) I no longer have 4 MBytes backlogged in qdisc by a single netperf session, and both side socket autotuning no longer use 4 Mbytes. As skb destructor cannot restart xmit itself ( as qdisc lock might be taken at this point ), we delegate the work to a tasklet. We use one tasklest per cpu for performance reasons. If tasklet finds a socket owned by the user, it sets TSQ_OWNED flag. This flag is tested in a new protocol method called from release_sock(), to eventually send new segments. [1] New /proc/sys/net/ipv4/tcp_limit_output_bytes tunable [2] skb_orphan() is usually called at TX completion time, but some drivers call it in their start_xmit() handler. These drivers should at least use BQL, or else a single TCP session can still fill the whole NIC TX ring, since TSQ will have no effect. Signed-off-by: Eric Dumazet Cc: Dave Taht Cc: Tom Herbert Cc: Matt Mathis Cc: Yuchung Cheng Cc: Nandita Dukkipati Signed-off-by: David S. Miller --- include/linux/tcp.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 2de9cf46f9fc..1888169e07c7 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -339,6 +339,9 @@ struct tcp_sock { u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ u32 lsndtime; /* timestamp of last sent data packet (for restart window) */ + struct list_head tsq_node; /* anchor in tsq_tasklet.head list */ + unsigned long tsq_flags; + /* Data for direct copy to user */ struct { struct sk_buff_head prequeue; @@ -494,6 +497,12 @@ struct tcp_sock { struct tcp_cookie_values *cookie_values; }; +enum tsq_flags { + TSQ_THROTTLED, + TSQ_QUEUED, + TSQ_OWNED, /* tcp_tasklet_func() found socket was locked */ +}; + static inline struct tcp_sock *tcp_sk(const struct sock *sk) { return (struct tcp_sock *)sk; -- cgit v1.2.3 From 2cefabc00ffdc1f22f960df946ae41b163081d5e Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 9 Jul 2012 12:10:26 +0300 Subject: v4l: Export v4l2-common.h in include/linux/Kbuild v4l2-common.h is a header file that's used in user space, thus it must be exported using header-y. Signed-off-by: Sakari Ailus Reported-by: Stephen Rothwell Tested-by: Stephen Rothwell Signed-off-by: Mauro Carvalho Chehab --- include/linux/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index d38b3a8fb380..ef4cc9429c3a 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -382,6 +382,7 @@ header-y += usbdevice_fs.h header-y += utime.h header-y += utsname.h header-y += uvcvideo.h +header-y += v4l2-common.h header-y += v4l2-dv-timings.h header-y += v4l2-mediabus.h header-y += v4l2-subdev.h -- cgit v1.2.3 From 6d4fa852a023080101f1665ea189dd1844c87fef Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 11 Jul 2012 10:56:57 +0000 Subject: net: sched: add ipset ematch Can be used to match packets against netfilter ip sets created via ipset(8). skb->sk_iif is used as 'incoming interface', skb->dev is 'outgoing interface'. Since ipset is usually called from netfilter, the ematch initializes a fake xt_action_param, pulls the ip header into the linear area and also sets skb->data to the IP header (otherwise matching Layer 4 set types doesn't work). Tested-by: Mr Dash Four Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- include/linux/pkt_cls.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index 38fbd4bc20ab..082eafaf026b 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -453,7 +453,8 @@ enum { #define TCF_EM_TEXT 5 #define TCF_EM_VLAN 6 #define TCF_EM_CANID 7 -#define TCF_EM_MAX 7 +#define TCF_EM_IPSET 8 +#define TCF_EM_MAX 8 enum { TCF_EM_PROG_TC -- cgit v1.2.3 From 6e88e1357c788d40cd64a8c9080e81ca6c9eee0f Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 11 Jul 2012 05:34:02 +0000 Subject: team: use function team_port_txable() for determing enabled and up port Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 99efd60fa8c9..dca426cb1e12 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -64,6 +64,7 @@ struct team_port { }; extern bool team_port_enabled(struct team_port *port); +extern bool team_port_txable(struct team_port *port); struct team_mode_ops { int (*init)(struct team *team); -- cgit v1.2.3 From 68c450426ae665653b06f62539e48727b696496f Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 11 Jul 2012 05:34:04 +0000 Subject: team: make team_port_enabled() and team_port_txable() static inline Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index dca426cb1e12..dfa0c8e0ab84 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -63,8 +63,15 @@ struct team_port { long mode_priv[0]; }; -extern bool team_port_enabled(struct team_port *port); -extern bool team_port_txable(struct team_port *port); +static inline bool team_port_enabled(struct team_port *port) +{ + return port->index != -1; +} + +static inline bool team_port_txable(struct team_port *port) +{ + return port->linkup && team_port_enabled(port); +} struct team_mode_ops { int (*init)(struct team *team); -- cgit v1.2.3 From faa95fde43f758d0a9e0e3d8751dac79aae1f08d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 11 Jul 2012 19:44:13 +0800 Subject: regulator: tps65910: Remvoe tps65910_reg_[read|modify_bits|read_locked|write_locked] functions The tps65910 mfd driver has been converted to regmap APIs. This patch adds tps65910_reg_update_bits() in include/linux/mfd/tps65910.h. Thus we can use tps65910_reg_read/tps65910_reg_write/tps65910_reg_update_bits directly and remove tps65910_reg_[read|modify_bits|read_locked|write_locked] functions. With this change, we can also remove the mutex in struct tps65910_reg. Signed-off-by: Axel Lin Tested-by: Laxman Dewangan Signed-off-by: Mark Brown --- include/linux/mfd/tps65910.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index c5f806011b32..1aca1fbbc138 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -882,4 +882,10 @@ static inline int tps65910_reg_clear_bits(struct tps65910 *tps65910, u8 reg, return regmap_update_bits(tps65910->regmap, reg, mask, 0); } +static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg, + u8 mask, u8 val) +{ + return regmap_update_bits(tps65910->regmap, reg, mask, val); +} + #endif /* __LINUX_MFD_TPS65910_H */ -- cgit v1.2.3 From 1beaf762b4ad5f53876f790bb6cfbd3bac072985 Mon Sep 17 00:00:00 2001 From: Krystian Garbaciak Date: Thu, 12 Jul 2012 13:53:35 +0100 Subject: regulator: Add REGULATOR_STATUS_UNDEFINED. REGULATOR_STATUS_UNDEFINED is to be returned by regulator, if any other state doesn't really apply. Signed-off-by: Krystian Garbaciak Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 80226383e561..2513a54ca2e8 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -32,6 +32,8 @@ enum regulator_status { REGULATOR_STATUS_NORMAL, REGULATOR_STATUS_IDLE, REGULATOR_STATUS_STANDBY, + /* in case that any other status doesn't apply */ + REGULATOR_STATUS_UNDEFINED, }; /** -- cgit v1.2.3 From a7f1b63eb85606ad77a559b95c703b99e1205aa4 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 10 Jul 2012 16:39:42 +0530 Subject: regulator: tps65217: Add device tree support This commit adds device tree support for tps65217 pmic. And usage details are added to device tree documentation. Driver is tested by using kernel module with regulator set and get APIs. Signed-off-by: AnilKumar Ch Signed-off-by: Mark Brown --- include/linux/mfd/tps65217.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index 3a80da103f3f..12c06870829a 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -217,7 +217,8 @@ enum tps65217_regulator_id { * Board data may be used to initialize regulator. */ struct tps65217_board { - struct regulator_init_data *tps65217_init_data; + struct regulator_init_data *tps65217_init_data[TPS65217_NUM_REGULATOR]; + struct device_node *of_node[TPS65217_NUM_REGULATOR]; }; /** -- cgit v1.2.3 From e1ac4b409037b128f9a3eca3b3ab5dbbb71a7e6f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 11 Jul 2012 09:23:43 +0200 Subject: bcma: add trivial GBIT MAC COMMON driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GMAC COMMON core is present on BCM4706 and is used for example to access board PHYs (PHYs can not be accessed directly using GBIT MAC core). Signed-off-by: RafaÅ‚ MiÅ‚ecki Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 2 + include/linux/bcma/bcma_driver_gmac_cmn.h | 100 ++++++++++++++++++++++++++++++ 2 files changed, 102 insertions(+) create mode 100644 include/linux/bcma/bcma_driver_gmac_cmn.h (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 03b2f30d2ace..1954a4e305a3 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -7,6 +7,7 @@ #include #include #include +#include #include /* SPROM sharing */ #include "bcma_regs.h" @@ -252,6 +253,7 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; struct bcma_drv_mips drv_mips; + struct bcma_drv_gmac_cmn drv_gmac_cmn; /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ diff --git a/include/linux/bcma/bcma_driver_gmac_cmn.h b/include/linux/bcma/bcma_driver_gmac_cmn.h new file mode 100644 index 000000000000..def894b83b0d --- /dev/null +++ b/include/linux/bcma/bcma_driver_gmac_cmn.h @@ -0,0 +1,100 @@ +#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_ +#define LINUX_BCMA_DRIVER_GMAC_CMN_H_ + +#include + +#define BCMA_GMAC_CMN_STAG0 0x000 +#define BCMA_GMAC_CMN_STAG1 0x004 +#define BCMA_GMAC_CMN_STAG2 0x008 +#define BCMA_GMAC_CMN_STAG3 0x00C +#define BCMA_GMAC_CMN_PARSER_CTL 0x020 +#define BCMA_GMAC_CMN_MIB_MAX_LEN 0x024 +#define BCMA_GMAC_CMN_PHY_ACCESS 0x100 +#define BCMA_GMAC_CMN_PA_DATA_MASK 0x0000ffff +#define BCMA_GMAC_CMN_PA_ADDR_MASK 0x001f0000 +#define BCMA_GMAC_CMN_PA_ADDR_SHIFT 16 +#define BCMA_GMAC_CMN_PA_REG_MASK 0x1f000000 +#define BCMA_GMAC_CMN_PA_REG_SHIFT 24 +#define BCMA_GMAC_CMN_PA_WRITE 0x20000000 +#define BCMA_GMAC_CMN_PA_START 0x40000000 +#define BCMA_GMAC_CMN_PHY_CTL 0x104 +#define BCMA_GMAC_CMN_PC_EPA_MASK 0x0000001f +#define BCMA_GMAC_CMN_PC_MCT_MASK 0x007f0000 +#define BCMA_GMAC_CMN_PC_MCT_SHIFT 16 +#define BCMA_GMAC_CMN_PC_MTE 0x00800000 +#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL 0x110 +#define BCMA_GMAC_CMN_CFP_ACCESS 0x200 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA0 0x210 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA1 0x214 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA2 0x218 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA3 0x21C +#define BCMA_GMAC_CMN_CFP_TCAM_DATA4 0x220 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA5 0x224 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA6 0x228 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA7 0x22C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK0 0x230 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK1 0x234 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK2 0x238 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK3 0x23C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK4 0x240 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK5 0x244 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK6 0x248 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK7 0x24C +#define BCMA_GMAC_CMN_CFP_ACTION_DATA 0x250 +#define BCMA_GMAC_CMN_TCAM_BIST_CTL 0x2A0 +#define BCMA_GMAC_CMN_TCAM_BIST_STATUS 0x2A4 +#define BCMA_GMAC_CMN_TCAM_CMP_STATUS 0x2A8 +#define BCMA_GMAC_CMN_TCAM_DISABLE 0x2AC +#define BCMA_GMAC_CMN_TCAM_TEST_CTL 0x2F0 +#define BCMA_GMAC_CMN_UDF_0_A3_A0 0x300 +#define BCMA_GMAC_CMN_UDF_0_A7_A4 0x304 +#define BCMA_GMAC_CMN_UDF_0_A8 0x308 +#define BCMA_GMAC_CMN_UDF_1_A3_A0 0x310 +#define BCMA_GMAC_CMN_UDF_1_A7_A4 0x314 +#define BCMA_GMAC_CMN_UDF_1_A8 0x318 +#define BCMA_GMAC_CMN_UDF_2_A3_A0 0x320 +#define BCMA_GMAC_CMN_UDF_2_A7_A4 0x324 +#define BCMA_GMAC_CMN_UDF_2_A8 0x328 +#define BCMA_GMAC_CMN_UDF_0_B3_B0 0x330 +#define BCMA_GMAC_CMN_UDF_0_B7_B4 0x334 +#define BCMA_GMAC_CMN_UDF_0_B8 0x338 +#define BCMA_GMAC_CMN_UDF_1_B3_B0 0x340 +#define BCMA_GMAC_CMN_UDF_1_B7_B4 0x344 +#define BCMA_GMAC_CMN_UDF_1_B8 0x348 +#define BCMA_GMAC_CMN_UDF_2_B3_B0 0x350 +#define BCMA_GMAC_CMN_UDF_2_B7_B4 0x354 +#define BCMA_GMAC_CMN_UDF_2_B8 0x358 +#define BCMA_GMAC_CMN_UDF_0_C3_C0 0x360 +#define BCMA_GMAC_CMN_UDF_0_C7_C4 0x364 +#define BCMA_GMAC_CMN_UDF_0_C8 0x368 +#define BCMA_GMAC_CMN_UDF_1_C3_C0 0x370 +#define BCMA_GMAC_CMN_UDF_1_C7_C4 0x374 +#define BCMA_GMAC_CMN_UDF_1_C8 0x378 +#define BCMA_GMAC_CMN_UDF_2_C3_C0 0x380 +#define BCMA_GMAC_CMN_UDF_2_C7_C4 0x384 +#define BCMA_GMAC_CMN_UDF_2_C8 0x388 +#define BCMA_GMAC_CMN_UDF_0_D3_D0 0x390 +#define BCMA_GMAC_CMN_UDF_0_D7_D4 0x394 +#define BCMA_GMAC_CMN_UDF_0_D11_D8 0x394 + +struct bcma_drv_gmac_cmn { + struct bcma_device *core; + + /* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and + * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */ + struct mutex phy_mutex; +}; + +/* Register access */ +#define gmac_cmn_read16(gc, offset) bcma_read16((gc)->core, offset) +#define gmac_cmn_read32(gc, offset) bcma_read32((gc)->core, offset) +#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val) +#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val) + +#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN +extern void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); +#else +static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { } +#endif + +#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */ -- cgit v1.2.3 From 9a7b8e002e331d0599127f16613c32f425a14f2c Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 May 2012 17:09:13 +0200 Subject: dmaengine: add an shdma-base library This patch extracts code from shdma.c, that does not directly deal with hardware implementation details and can be re-used with diverse DMA controller variants, found on SH-based SoCs. Signed-off-by: Guennadi Liakhovetski Cc: Sascha Hauer Signed-off-by: Vinod Koul --- include/linux/shdma-base.h | 123 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 include/linux/shdma-base.h (limited to 'include/linux') diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h new file mode 100644 index 000000000000..83efd1332b39 --- /dev/null +++ b/include/linux/shdma-base.h @@ -0,0 +1,123 @@ +/* + * Dmaengine driver base library for DMA controllers, found on SH-based SoCs + * + * extracted from shdma.c and headers + * + * Copyright (C) 2011-2012 Guennadi Liakhovetski + * Copyright (C) 2009 Nobuhiro Iwamatsu + * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved. + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#ifndef SHDMA_BASE_H +#define SHDMA_BASE_H + +#include +#include +#include +#include + +/** + * shdma_pm_state - DMA channel PM state + * SHDMA_PM_ESTABLISHED: either idle or during data transfer + * SHDMA_PM_BUSY: during the transfer preparation, when we have to + * drop the lock temporarily + * SHDMA_PM_PENDING: transfers pending + */ +enum shdma_pm_state { + SHDMA_PM_ESTABLISHED, + SHDMA_PM_BUSY, + SHDMA_PM_PENDING, +}; + +struct device; + +/* + * Drivers, using this library are expected to embed struct shdma_dev, + * struct shdma_chan, struct shdma_desc, and struct shdma_slave + * in their respective device, channel, descriptor and slave objects. + */ + +struct shdma_slave { + unsigned int slave_id; +}; + +struct shdma_desc { + struct list_head node; + struct dma_async_tx_descriptor async_tx; + enum dma_transfer_direction direction; + dma_cookie_t cookie; + int chunks; + int mark; +}; + +struct shdma_chan { + spinlock_t chan_lock; /* Channel operation lock */ + struct list_head ld_queue; /* Link descriptors queue */ + struct list_head ld_free; /* Free link descriptors */ + struct dma_chan dma_chan; /* DMA channel */ + struct device *dev; /* Channel device */ + void *desc; /* buffer for descriptor array */ + int desc_num; /* desc count */ + size_t max_xfer_len; /* max transfer length */ + int id; /* Raw id of this channel */ + int irq; /* Channel IRQ */ + enum shdma_pm_state pm_state; +}; + +/** + * struct shdma_ops - simple DMA driver operations + * desc_completed: return true, if this is the descriptor, that just has + * completed (atomic) + * halt_channel: stop DMA channel operation (atomic) + * channel_busy: return true, if the channel is busy (atomic) + * slave_addr: return slave DMA address + * desc_setup: set up the hardware specific descriptor portion (atomic) + * set_slave: bind channel to a slave + * setup_xfer: configure channel hardware for operation (atomic) + * start_xfer: start the DMA transfer (atomic) + * embedded_desc: return Nth struct shdma_desc pointer from the + * descriptor array + * chan_irq: process channel IRQ, return true if a transfer has + * completed (atomic) + */ +struct shdma_ops { + bool (*desc_completed)(struct shdma_chan *, struct shdma_desc *); + void (*halt_channel)(struct shdma_chan *); + bool (*channel_busy)(struct shdma_chan *); + dma_addr_t (*slave_addr)(struct shdma_chan *); + int (*desc_setup)(struct shdma_chan *, struct shdma_desc *, + dma_addr_t, dma_addr_t, size_t *); + int (*set_slave)(struct shdma_chan *, struct shdma_slave *); + void (*setup_xfer)(struct shdma_chan *, struct shdma_slave *); + void (*start_xfer)(struct shdma_chan *, struct shdma_desc *); + struct shdma_desc *(*embedded_desc)(void *, int); + bool (*chan_irq)(struct shdma_chan *, int); +}; + +struct shdma_dev { + struct dma_device dma_dev; + struct shdma_chan **schan; + const struct shdma_ops *ops; + size_t desc_size; +}; + +#define shdma_for_each_chan(c, d, i) for (i = 0, c = (d)->schan[0]; \ + i < (d)->dma_dev.chancnt; c = (d)->schan[++i]) + +int shdma_request_irq(struct shdma_chan *, int, + unsigned long, const char *); +void shdma_free_irq(struct shdma_chan *); +bool shdma_reset(struct shdma_dev *sdev); +void shdma_chan_probe(struct shdma_dev *sdev, + struct shdma_chan *schan, int id); +void shdma_chan_remove(struct shdma_chan *schan); +int shdma_init(struct device *dev, struct shdma_dev *sdev, + int chan_num); +void shdma_cleanup(struct shdma_dev *sdev); + +#endif -- cgit v1.2.3 From 5902c9a7a2a9c2520af54af1ba7a9c7831664a17 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 May 2012 17:09:14 +0200 Subject: dma: shdma: prepare for conversion to the shdma base library By placing an anonymous union at the top of struct sh_dmae_slave we can transparently prepare all device and client drivers for the upcoming shdma-base conversion. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Vinod Koul --- include/linux/sh_dma.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 425450b980b8..e081e8e8d109 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -10,12 +10,16 @@ #ifndef SH_DMA_H #define SH_DMA_H -#include #include +#include +#include /* Used by slave DMA clients to request DMA to/from a specific peripheral */ struct sh_dmae_slave { - unsigned int slave_id; /* Set by the platform */ + union { + unsigned int slave_id; /* Set by the platform */ + struct shdma_slave shdma_slave; + }; struct device *dma_dev; /* Set by the platform */ const struct sh_dmae_slave_config *config; /* Set by the driver */ }; -- cgit v1.2.3 From 916001fe33b7b4dc797f7b29ec8bc346c4369fa6 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 May 2012 17:09:15 +0200 Subject: mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion Now that all users have been updated to use the embedded in struct sh_mmcif_plat_data DMA slave IDs, struct sh_mmcif_dma is no longer needed and can be removed. This also makes preparation to the shdma base library conversion easier. Signed-off-by: Guennadi Liakhovetski Cc: Chris Ball Signed-off-by: Vinod Koul --- include/linux/mmc/sh_mmcif.h | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 05f0e3db1c12..c37956ccf02e 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -32,17 +32,11 @@ * 1111 : Peripheral clock (sup_pclk set '1') */ -struct sh_mmcif_dma { - struct sh_dmae_slave chan_priv_tx; - struct sh_dmae_slave chan_priv_rx; -}; - struct sh_mmcif_plat_data { void (*set_pwr)(struct platform_device *pdev, int state); void (*down_pwr)(struct platform_device *pdev); int (*get_cd)(struct platform_device *pdef); - struct sh_mmcif_dma *dma; /* Deprecated. Instead */ - unsigned int slave_id_tx; /* use embedded slave_id_[tr]x */ + unsigned int slave_id_tx; /* embedded slave_id_[tr]x */ unsigned int slave_id_rx; u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ unsigned long caps; -- cgit v1.2.3 From ce3a1ab74264b860450709e4bd0dcfc2d0bfc7f8 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 May 2012 17:09:21 +0200 Subject: dma: shdma: convert to the shdma base library The shdma base library has originally been extracted from the shdma driver, which now can be converted to actually use it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Vinod Koul --- include/linux/sh_dma.h | 33 ++++++++++----------------------- 1 file changed, 10 insertions(+), 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index e081e8e8d109..7c8ca41e60e6 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -13,34 +13,21 @@ #include #include #include +#include + +struct device; /* Used by slave DMA clients to request DMA to/from a specific peripheral */ struct sh_dmae_slave { - union { - unsigned int slave_id; /* Set by the platform */ - struct shdma_slave shdma_slave; - }; - struct device *dma_dev; /* Set by the platform */ - const struct sh_dmae_slave_config *config; /* Set by the driver */ -}; - -struct sh_dmae_regs { - u32 sar; /* SAR / source address */ - u32 dar; /* DAR / destination address */ - u32 tcr; /* TCR / transfer count */ -}; - -struct sh_desc { - struct sh_dmae_regs hw; - struct list_head node; - struct dma_async_tx_descriptor async_tx; - enum dma_transfer_direction direction; - dma_cookie_t cookie; - size_t partial; - int chunks; - int mark; + struct shdma_slave shdma_slave; /* Set by the platform */ + struct device *dma_dev; /* Set by the platform */ + const struct sh_dmae_slave_config *config; /* Set by the driver */ }; +/* + * Supplied by platforms to specify, how a DMA channel has to be configured for + * a certain peripheral + */ struct sh_dmae_slave_config { unsigned int slave_id; dma_addr_t addr; -- cgit v1.2.3 From 869dd4662f90514cb92b44a389e85c737b464e25 Mon Sep 17 00:00:00 2001 From: Erik Hugne Date: Fri, 29 Jun 2012 00:50:24 -0400 Subject: tipc: remove print_buf and deprecated log buffer code The internal log buffer handling functions can now safely be removed since there is no code using it anymore. Requests to interact with the internal tipc log buffer over netlink (in config.c) will report 'obsolete command'. This represents the final removal of any references to a struct print_buf, and the removal of the struct itself. We also get rid of a TIPC specific Kconfig in the process. Finally, log.h is removed since it is not needed anymore. Signed-off-by: Erik Hugne Signed-off-by: Jon Maloy Signed-off-by: Paul Gortmaker --- include/linux/tipc_config.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h index 9730b0e51e46..c98928420100 100644 --- a/include/linux/tipc_config.h +++ b/include/linux/tipc_config.h @@ -102,8 +102,8 @@ #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ -#define TIPC_CMD_SET_LOG_SIZE 0x410A /* tx unsigned, rx none */ -#define TIPC_CMD_DUMP_LOG 0x410B /* tx none, rx ultra_string */ +#define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */ +#define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */ #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ /* -- cgit v1.2.3 From bee737bccb03ebd27f2d52706e9aed2fa2c8dcc4 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 12 Jul 2012 15:03:25 +0900 Subject: charger-manager: Use EXTCON Subsystem to detect charger cables for charging This patch support that charger-manager use EXTCON(External Connector) Subsystem to detect the state of charger cables for enabling or disabling charger(regulator) and select the charger cable for charging among a number of external cable according to policy of H/W board. Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Anton Vorontsov --- include/linux/power/charger-manager.h | 59 ++++++++++++++++++++++++++++++++++- 1 file changed, 58 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h index 241065c9ce51..6cb9fbc9a153 100644 --- a/include/linux/power/charger-manager.h +++ b/include/linux/power/charger-manager.h @@ -16,6 +16,7 @@ #define _CHARGER_MANAGER_H #include +#include enum data_source { CM_BATTERY_PRESENT, @@ -64,6 +65,62 @@ struct charger_global_desc { bool assume_timer_stops_in_suspend; }; +/** + * struct charger_cable + * @extcon_name: the name of extcon device. + * @name: the name of charger cable(external connector). + * @extcon_dev: the extcon device. + * @wq: the workqueue to control charger according to the state of + * charger cable. If charger cable is attached, enable charger. + * But if charger cable is detached, disable charger. + * @nb: the notifier block to receive changed state from EXTCON + * (External Connector) when charger cable is attached/detached. + * @attached: the state of charger cable. + * true: the charger cable is attached + * false: the charger cable is detached + * @charger: the instance of struct charger_regulator. + * @cm: the Charger Manager representing the battery. + */ +struct charger_cable { + const char *extcon_name; + const char *name; + + /* The charger-manager use Exton framework*/ + struct extcon_specific_cable_nb extcon_dev; + struct work_struct wq; + struct notifier_block nb; + + /* The state of charger cable */ + bool attached; + + struct charger_regulator *charger; + struct charger_manager *cm; +}; + +/** + * struct charger_regulator + * @regulator_name: the name of regulator for using charger. + * @consumer: the regulator consumer for the charger. + * @cables: + * the array of charger cables to enable/disable charger + * and set current limit according to constratint data of + * struct charger_cable if only charger cable included + * in the array of charger cables is attached/detached. + * @num_cables: the number of charger cables. + */ +struct charger_regulator { + /* The name of regulator for charging */ + const char *regulator_name; + struct regulator *consumer; + + /* + * Store constraint information related to current limit, + * each cable have different condition for charging. + */ + struct charger_cable *cables; + int num_cables; +}; + /** * struct charger_desc * @psy_name: the name of power-supply-class for charger manager @@ -109,7 +166,7 @@ struct charger_desc { char **psy_charger_stat; int num_charger_regulators; - struct regulator_bulk_data *charger_regulators; + struct charger_regulator *charger_regulators; char *psy_fuel_gauge; -- cgit v1.2.3 From 45cd4fb28b43756afcd752ed1e8b3b836c1b1a2a Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 12 Jul 2012 15:03:29 +0900 Subject: charger-manager: Set current limit of regulator for over current protection This patch support the protection of host device from over current. The Charger-manager set proper current limit of charger(regulator) for charging according to type of charger cable when external connector is attached. Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Anton Vorontsov --- include/linux/power/charger-manager.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h index 6cb9fbc9a153..cd22029e32aa 100644 --- a/include/linux/power/charger-manager.h +++ b/include/linux/power/charger-manager.h @@ -94,6 +94,14 @@ struct charger_cable { bool attached; struct charger_regulator *charger; + + /* + * Set min/max current of regulator to protect over-current issue + * according to a kind of charger cable when cable is attached. + */ + int min_uA; + int max_uA; + struct charger_manager *cm; }; -- cgit v1.2.3 From e908c41806bdb9151c8f875c4f9d73c6f66e3bc8 Mon Sep 17 00:00:00 2001 From: Ramakrishna Pallala Date: Thu, 5 Jul 2012 16:59:12 +0530 Subject: power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT Minimum and maximum alerts on power supply properties will help or allow the user space to "proactively" create policies like connect/disconnect charger or stop/start the user apps based on capacity or temperature parameters. These parameters can be used to avoid unnecessary polling from user space and even from kernel space if the underlying HW can support INT triggers (ex: max17042/47). This patch adds the following power supply alert type properties: CAPACITY_ALERT_MIN CAPACITY_ALERT_MAX TEMP_ALERT_MIN TEMP_ALERT_MAX TEMP_AMBIENT_ALERT_MIN TEMP_AMBIENT_ALERT_MAX Signed-off-by: Ramakrishna Pallala Signed-off-by: Anton Vorontsov --- include/linux/power_supply.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 53f177db6ac9..0bafbb15f29c 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -118,9 +118,15 @@ enum power_supply_property { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_AVG, POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_ALERT_MAX, /* in percents! */ POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TEMP_ALERT_MIN, + POWER_SUPPLY_PROP_TEMP_ALERT_MAX, POWER_SUPPLY_PROP_TEMP_AMBIENT, + POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN, + POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, -- cgit v1.2.3 From 1aebb0973160570e1df4c95c2e43a60993f71087 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Tue, 3 Jul 2012 01:19:03 +0000 Subject: lp8727_charger: Move header file into platform_data directory The lp8727 header can be used only in the platform side, so it can be moved to the platform_data directory. Signed-off-by: Milo(Woogyom) Kim Signed-off-by: Anton Vorontsov --- include/linux/lp8727.h | 65 ------------------------------------ include/linux/platform_data/lp8727.h | 65 ++++++++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+), 65 deletions(-) delete mode 100644 include/linux/lp8727.h create mode 100644 include/linux/platform_data/lp8727.h (limited to 'include/linux') diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h deleted file mode 100644 index ea98c6133d32..000000000000 --- a/include/linux/lp8727.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * LP8727 Micro/Mini USB IC with integrated charger - * - * Copyright (C) 2011 Texas Instruments - * Copyright (C) 2011 National Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _LP8727_H -#define _LP8727_H - -enum lp8727_eoc_level { - EOC_5P, - EOC_10P, - EOC_16P, - EOC_20P, - EOC_25P, - EOC_33P, - EOC_50P, -}; - -enum lp8727_ichg { - ICHG_90mA, - ICHG_100mA, - ICHG_400mA, - ICHG_450mA, - ICHG_500mA, - ICHG_600mA, - ICHG_700mA, - ICHG_800mA, - ICHG_900mA, - ICHG_1000mA, -}; - -/** - * struct lp8727_chg_param - * @eoc_level : end of charge level setting - * @ichg : charging current - */ -struct lp8727_chg_param { - enum lp8727_eoc_level eoc_level; - enum lp8727_ichg ichg; -}; - -/** - * struct lp8727_platform_data - * @get_batt_present : check battery status - exists or not - * @get_batt_level : get battery voltage (mV) - * @get_batt_capacity : get battery capacity (%) - * @get_batt_temp : get battery temperature - * @ac, @usb : charging parameters each charger type - */ -struct lp8727_platform_data { - u8 (*get_batt_present)(void); - u16 (*get_batt_level)(void); - u8 (*get_batt_capacity)(void); - u8 (*get_batt_temp)(void); - struct lp8727_chg_param ac; - struct lp8727_chg_param usb; -}; - -#endif diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h new file mode 100644 index 000000000000..ea98c6133d32 --- /dev/null +++ b/include/linux/platform_data/lp8727.h @@ -0,0 +1,65 @@ +/* + * LP8727 Micro/Mini USB IC with integrated charger + * + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2011 National Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LP8727_H +#define _LP8727_H + +enum lp8727_eoc_level { + EOC_5P, + EOC_10P, + EOC_16P, + EOC_20P, + EOC_25P, + EOC_33P, + EOC_50P, +}; + +enum lp8727_ichg { + ICHG_90mA, + ICHG_100mA, + ICHG_400mA, + ICHG_450mA, + ICHG_500mA, + ICHG_600mA, + ICHG_700mA, + ICHG_800mA, + ICHG_900mA, + ICHG_1000mA, +}; + +/** + * struct lp8727_chg_param + * @eoc_level : end of charge level setting + * @ichg : charging current + */ +struct lp8727_chg_param { + enum lp8727_eoc_level eoc_level; + enum lp8727_ichg ichg; +}; + +/** + * struct lp8727_platform_data + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) + * @get_batt_capacity : get battery capacity (%) + * @get_batt_temp : get battery temperature + * @ac, @usb : charging parameters each charger type + */ +struct lp8727_platform_data { + u8 (*get_batt_present)(void); + u16 (*get_batt_level)(void); + u8 (*get_batt_capacity)(void); + u8 (*get_batt_temp)(void); + struct lp8727_chg_param ac; + struct lp8727_chg_param usb; +}; + +#endif -- cgit v1.2.3 From 8bb986a816148d6e8fbaae23be0fee33d6a1ae3f Mon Sep 17 00:00:00 2001 From: Ganesan Ramalingam Date: Fri, 13 Jul 2012 19:14:23 +0530 Subject: i2c: i2c-ocores: Use reg-shift property Deprecate 'regstep' property and use the standard 'reg-shift' property for register offset shifts. 'regstep' will still be supported as an optional property, but will give a warning when used. Signed-off-by: Ganesan Ramalingam Signed-off-by: Jayachandran C Signed-off-by: Wolfram Sang --- include/linux/i2c-ocores.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h index 4d5e57ff6614..5d95df2436f4 100644 --- a/include/linux/i2c-ocores.h +++ b/include/linux/i2c-ocores.h @@ -12,7 +12,7 @@ #define _LINUX_I2C_OCORES_H struct ocores_i2c_platform_data { - u32 regstep; /* distance between registers */ + u32 reg_shift; /* register offset shift value */ u32 clock_khz; /* input clock in kHz */ u8 num_devices; /* number of devices in the devices list */ struct i2c_board_info const *devices; /* devices connected to the bus */ -- cgit v1.2.3 From 7326e38ffe894d0cd2904704b7d8c53d4a55d752 Mon Sep 17 00:00:00 2001 From: Ganesan Ramalingam Date: Fri, 13 Jul 2012 19:14:25 +0530 Subject: i2c: i2c-ocores: support for 16bit and 32bit IO Some architectures supports only 16-bit or 32-bit read/write access to their IO space. Add a 'reg-io-width' platform and OF parameter which specifies the IO width to support these platforms. reg-io-width can be specified as 1, 2 or 4, and has a default value of 1 if it is unspecified. Signed-off-by: Ganesan Ramalingam Signed-off-by: Jayachandran C Signed-off-by: Wolfram Sang --- include/linux/i2c-ocores.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h index 5d95df2436f4..1c06b5c7c308 100644 --- a/include/linux/i2c-ocores.h +++ b/include/linux/i2c-ocores.h @@ -13,6 +13,7 @@ struct ocores_i2c_platform_data { u32 reg_shift; /* register offset shift value */ + u32 reg_io_width; /* register io read/write width */ u32 clock_khz; /* input clock in kHz */ u8 num_devices; /* number of devices in the devices list */ struct i2c_board_info const *devices; /* devices connected to the bus */ -- cgit v1.2.3 From b3d9b7a3c752dc4b6976a4ff7b8298887a5b734d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 9 Jun 2012 13:51:19 -0400 Subject: vfs: switch i_dentry/d_alias to hlist Signed-off-by: Al Viro --- include/linux/dcache.h | 2 +- include/linux/fs.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 094789ff3e9f..8ca255518204 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -128,7 +128,7 @@ struct dentry { struct rcu_head d_rcu; } d_u; struct list_head d_subdirs; /* our children */ - struct list_head d_alias; /* inode alias list */ + struct hlist_node d_alias; /* inode alias list */ }; /* diff --git a/include/linux/fs.h b/include/linux/fs.h index 17fd887c798f..f06db6bd5a74 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -826,7 +826,7 @@ struct inode { struct list_head i_lru; /* inode LRU list */ struct list_head i_sb_list; union { - struct list_head i_dentry; + struct hlist_head i_dentry; struct rcu_head i_rcu; }; u64 i_version; -- cgit v1.2.3 From d18e9008c377dc6a6d2166a6840bf3a23a5867fd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 5 Jun 2012 15:10:17 +0200 Subject: vfs: add i_op->atomic_open() Add a new inode operation which is called on the last component of an open. Using this the filesystem can look up, possibly create and open the file in one atomic operation. If it cannot perform this (e.g. the file type turned out to be wrong) it may signal this by returning NULL instead of an open struct file pointer. i_op->atomic_open() is only called if the last component is negative or needs lookup. Handling cached positive dentries here doesn't add much value: these can be opened using f_op->open(). If the cached file turns out to be invalid, the open can be retried, this time using ->atomic_open() with a fresh dentry. For now leave the old way of using open intents in lookup and revalidate in place. This will be removed once all the users are converted. David Howells noticed that if ->atomic_open() opens the file but does not create it, handle_truncate() will be called on it even if it is not a regular file. Fix this by checking the file type in this case too. Signed-off-by: Miklos Szeredi Signed-off-by: Al Viro --- include/linux/fs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index f06db6bd5a74..0314635cf833 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -427,6 +427,7 @@ struct kstatfs; struct vm_area_struct; struct vfsmount; struct cred; +struct opendata; extern void __init inode_init(void); extern void __init inode_init_early(void); @@ -1693,6 +1694,9 @@ struct inode_operations { int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); int (*update_time)(struct inode *, struct timespec *, int); + struct file * (*atomic_open)(struct inode *, struct dentry *, + struct opendata *, unsigned open_flag, + umode_t create_mode, bool *created); } ____cacheline_aligned; struct seq_file; @@ -2061,6 +2065,9 @@ extern struct file * dentry_open(struct dentry *, struct vfsmount *, int, const struct cred *); extern int filp_close(struct file *, fl_owner_t id); extern char * getname(const char __user *); +extern struct file *finish_open(struct opendata *od, struct dentry *dentry, + int (*open)(struct inode *, struct file *)); +extern void finish_no_open(struct opendata *od, struct dentry *dentry); /* fs/ioctl.c */ -- cgit v1.2.3 From 8867fe5899010a0c0ac36dadfdacf1072b1c990c Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 5 Jun 2012 15:10:19 +0200 Subject: nfs: clean up ->create in nfs_rpc_ops Don't pass nfs_open_context() to ->create(). Only the NFS4 implementation needed that and only because it wanted to return an open file using open intents. That task has been replaced by ->atomic_open so it is not necessary anymore to pass the context to the create rpc operation. Despite nfs4_proc_create apparently being okay with a NULL context it Oopses somewhere down the call chain. So allocate a context here. Signed-off-by: Miklos Szeredi CC: Trond Myklebust Signed-off-by: Al Viro --- include/linux/nfs_xdr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 8aadd90b808a..d3b7c18b18f4 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1374,7 +1374,7 @@ struct nfs_rpc_ops { int (*readlink)(struct inode *, struct page *, unsigned int, unsigned int); int (*create) (struct inode *, struct dentry *, - struct iattr *, int, struct nfs_open_context *); + struct iattr *, int); int (*remove) (struct inode *, struct qstr *); void (*unlink_setup) (struct rpc_message *, struct inode *dir); void (*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *); -- cgit v1.2.3 From 015c3bbcd88df2305aae5b017a9c91c08b380aa1 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 5 Jun 2012 15:10:27 +0200 Subject: vfs: remove open intents from nameidata All users of open intents have been converted to use ->atomic_{open,create}. This patch gets rid of nd->intent.open and related infrastructure. Signed-off-by: Miklos Szeredi Signed-off-by: Al Viro --- include/linux/namei.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index ffc02135c483..23d859879210 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -7,12 +7,6 @@ struct vfsmount; -struct open_intent { - int flags; - int create_mode; - struct file *file; -}; - enum { MAX_NESTED_LINKS = 8 }; struct nameidata { @@ -25,11 +19,6 @@ struct nameidata { int last_type; unsigned depth; char *saved_names[MAX_NESTED_LINKS + 1]; - - /* Intent data */ - union { - struct open_intent open; - } intent; }; /* @@ -82,9 +71,6 @@ extern int kern_path_parent(const char *, struct nameidata *); extern int vfs_path_lookup(struct dentry *, struct vfsmount *, const char *, unsigned int, struct path *); -extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, - int (*open)(struct inode *, struct file *)); - extern struct dentry *lookup_one_len(const char *, struct dentry *, int); extern int follow_down_one(struct path *); -- cgit v1.2.3 From 47237687d73cbeae1dd7a133c3fc3d7239094568 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 10 Jun 2012 05:01:45 -0400 Subject: ->atomic_open() prototype change - pass int * instead of bool * ... and let finish_open() report having opened the file via that sucker. Next step: don't modify od->filp at all. [AV: FILE_CREATE was already used by cifs; Miklos' fix folded] Signed-off-by: Al Viro --- include/linux/fs.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 0314635cf833..a7618cf28d0e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1696,7 +1696,7 @@ struct inode_operations { int (*update_time)(struct inode *, struct timespec *, int); struct file * (*atomic_open)(struct inode *, struct dentry *, struct opendata *, unsigned open_flag, - umode_t create_mode, bool *created); + umode_t create_mode, int *opened); } ____cacheline_aligned; struct seq_file; @@ -2065,8 +2065,13 @@ extern struct file * dentry_open(struct dentry *, struct vfsmount *, int, const struct cred *); extern int filp_close(struct file *, fl_owner_t id); extern char * getname(const char __user *); +enum { + FILE_CREATED = 1, + FILE_OPENED = 2 +}; extern struct file *finish_open(struct opendata *od, struct dentry *dentry, - int (*open)(struct inode *, struct file *)); + int (*open)(struct inode *, struct file *), + int *opened); extern void finish_no_open(struct opendata *od, struct dentry *dentry); /* fs/ioctl.c */ -- cgit v1.2.3 From d95852777bc8ba6b3ad3397d495c5f9dd8ca8383 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 22 Jun 2012 12:39:14 +0400 Subject: make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro --- include/linux/fs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index a7618cf28d0e..33bda922988a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1694,9 +1694,9 @@ struct inode_operations { int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); int (*update_time)(struct inode *, struct timespec *, int); - struct file * (*atomic_open)(struct inode *, struct dentry *, - struct opendata *, unsigned open_flag, - umode_t create_mode, int *opened); + int (*atomic_open)(struct inode *, struct dentry *, + struct opendata *, unsigned open_flag, + umode_t create_mode, int *opened); } ____cacheline_aligned; struct seq_file; -- cgit v1.2.3 From 30d904947459cca2beb69e0110716f5248b31f2a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 22 Jun 2012 12:40:19 +0400 Subject: kill struct opendata Just pass struct file *. Methods are happier that way... There's no need to return struct file * from finish_open() now, so let it return int. Next: saner prototypes for parts in namei.c Signed-off-by: Al Viro --- include/linux/fs.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 33bda922988a..1dcc75c95763 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -427,7 +427,6 @@ struct kstatfs; struct vm_area_struct; struct vfsmount; struct cred; -struct opendata; extern void __init inode_init(void); extern void __init inode_init_early(void); @@ -1695,7 +1694,7 @@ struct inode_operations { u64 len); int (*update_time)(struct inode *, struct timespec *, int); int (*atomic_open)(struct inode *, struct dentry *, - struct opendata *, unsigned open_flag, + struct file *, unsigned open_flag, umode_t create_mode, int *opened); } ____cacheline_aligned; @@ -2069,10 +2068,10 @@ enum { FILE_CREATED = 1, FILE_OPENED = 2 }; -extern struct file *finish_open(struct opendata *od, struct dentry *dentry, - int (*open)(struct inode *, struct file *), - int *opened); -extern void finish_no_open(struct opendata *od, struct dentry *dentry); +extern int finish_open(struct file *file, struct dentry *dentry, + int (*open)(struct inode *, struct file *), + int *opened); +extern void finish_no_open(struct file *file, struct dentry *dentry); /* fs/ioctl.c */ -- cgit v1.2.3 From e45198a6ac24bd2c4ad4a43b670c2f1a23dd2df3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 10 Jun 2012 06:48:09 -0400 Subject: make finish_no_open() return int namely, 1 ;-) That's what we want to return from ->atomic_open() instances after finish_no_open(). Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 1dcc75c95763..17ee20dba86c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2071,7 +2071,7 @@ enum { extern int finish_open(struct file *file, struct dentry *dentry, int (*open)(struct inode *, struct file *), int *opened); -extern void finish_no_open(struct file *file, struct dentry *dentry); +extern int finish_no_open(struct file *file, struct dentry *dentry); /* fs/ioctl.c */ -- cgit v1.2.3 From 0b728e1911cbe6e24020727c3870628b9653f32a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 10 Jun 2012 16:03:43 -0400 Subject: stop passing nameidata * to ->d_revalidate() Just the lookup flags. Die, bastard, die... Signed-off-by: Al Viro --- include/linux/dcache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 8ca255518204..caa34e50537e 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -144,7 +144,7 @@ enum dentry_d_lock_class }; struct dentry_operations { - int (*d_revalidate)(struct dentry *, struct nameidata *); + int (*d_revalidate)(struct dentry *, unsigned int); int (*d_hash)(const struct dentry *, const struct inode *, struct qstr *); int (*d_compare)(const struct dentry *, const struct inode *, -- cgit v1.2.3 From 00cd8dd3bf95f2cc8435b4cac01d9995635c6d0b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 10 Jun 2012 17:13:09 -0400 Subject: stop passing nameidata to ->lookup() Just the flags; only NFS cares even about that, but there are legitimate uses for such argument. And getting rid of that completely would require splitting ->lookup() into a couple of methods (at least), so let's leave that alone for now... Signed-off-by: Al Viro --- include/linux/fs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 17ee20dba86c..7a71709b7fa7 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1666,7 +1666,7 @@ struct file_operations { }; struct inode_operations { - struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *); + struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); void * (*follow_link) (struct dentry *, struct nameidata *); int (*permission) (struct inode *, int); struct posix_acl * (*get_acl)(struct inode *, int); @@ -2571,7 +2571,7 @@ extern int simple_write_end(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned copied, struct page *page, void *fsdata); -extern struct dentry *simple_lookup(struct inode *, struct dentry *, struct nameidata *); +extern struct dentry *simple_lookup(struct inode *, struct dentry *, unsigned int flags); extern ssize_t generic_read_dir(struct file *, char __user *, size_t, loff_t *); extern const struct file_operations simple_dir_operations; extern const struct inode_operations simple_dir_inode_operations; -- cgit v1.2.3 From ebfc3b49a7ac25920cb5be5445f602e51d2ea559 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 10 Jun 2012 18:05:36 -0400 Subject: don't pass nameidata to ->create() boolean "does it have to be exclusive?" flag is passed instead; Local filesystem should just ignore it - the object is guaranteed not to be there yet. Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 7a71709b7fa7..df869d248e7c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1674,7 +1674,7 @@ struct inode_operations { int (*readlink) (struct dentry *, char __user *,int); void (*put_link) (struct dentry *, struct nameidata *, void *); - int (*create) (struct inode *,struct dentry *,umode_t,struct nameidata *); + int (*create) (struct inode *,struct dentry *, umode_t, bool); int (*link) (struct dentry *,struct inode *,struct dentry *); int (*unlink) (struct inode *,struct dentry *); int (*symlink) (struct inode *,struct dentry *,const char *); -- cgit v1.2.3 From 312b63fba9e88a0dcf800834b8ede8716bcc1e17 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 10 Jun 2012 18:09:36 -0400 Subject: don't pass nameidata * to vfs_create() all we want is a boolean flag, same as the method gets now Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index df869d248e7c..2f857e9eeb3a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1571,7 +1571,7 @@ extern void unlock_super(struct super_block *); /* * VFS helper functions.. */ -extern int vfs_create(struct inode *, struct dentry *, umode_t, struct nameidata *); +extern int vfs_create(struct inode *, struct dentry *, umode_t, bool); extern int vfs_mkdir(struct inode *, struct dentry *, umode_t); extern int vfs_mknod(struct inode *, struct dentry *, umode_t, dev_t); extern int vfs_symlink(struct inode *, struct dentry *, const char *); -- cgit v1.2.3 From 79714f72d3b964611997de512cb29198c9f2dbbb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 15 Jun 2012 03:01:42 +0400 Subject: get rid of kern_path_parent() all callers want the same thing, actually - a kinda-sorta analog of kern_path_create(). I.e. they want parent vfsmount/dentry (with ->i_mutex held, to make sure the child dentry is still their child) + the child dentry. Signed-off-by Al Viro --- include/linux/namei.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index 23d859879210..f5931489e150 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -67,7 +67,7 @@ extern int kern_path(const char *, unsigned, struct path *); extern struct dentry *kern_path_create(int, const char *, struct path *, int); extern struct dentry *user_path_create(int, const char __user *, struct path *, int); -extern int kern_path_parent(const char *, struct nameidata *); +extern struct dentry *kern_path_locked(const char *, struct path *); extern int vfs_path_lookup(struct dentry *, struct vfsmount *, const char *, unsigned int, struct path *); -- cgit v1.2.3 From b5fb63c18315c5510c1d0636179c057e0c761c77 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 18 Jun 2012 10:47:04 -0400 Subject: fs: add nd_jump_link Add a helper that abstracts out the jump to an already parsed struct path from ->follow_link operation from procfs. Not only does this clean up the code by moving the two sides of this game into a single helper, but it also prepares for making struct nameidata private to namei.c Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/namei.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index f5931489e150..d2ef8b34b967 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -80,6 +80,8 @@ extern int follow_up(struct path *); extern struct dentry *lock_rename(struct dentry *, struct dentry *); extern void unlock_rename(struct dentry *, struct dentry *); +extern void nd_jump_link(struct nameidata *nd, struct path *path); + static inline void nd_set_link(struct nameidata *nd, char *path) { nd->saved_names[nd->depth] = path; -- cgit v1.2.3 From 9249e17fe094d853d1ef7475dd559a2cc7e23d42 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 25 Jun 2012 12:55:37 +0100 Subject: VFS: Pass mount flags to sget() Pass mount flags to sget() so that it can use them in initialising a new superblock before the set function is called. They could also be passed to the compare function. Signed-off-by: David Howells Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 2f857e9eeb3a..48548bdd7722 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1914,7 +1914,7 @@ void free_anon_bdev(dev_t); struct super_block *sget(struct file_system_type *type, int (*test)(struct super_block *,void *), int (*set)(struct super_block *,void *), - void *data); + int flags, void *data); extern struct dentry *mount_pseudo(struct file_system_type *, char *, const struct super_operations *ops, const struct dentry_operations *dops, -- cgit v1.2.3 From 775f4b297b780601e61787b766f306ed3e1d23eb Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 2 Jul 2012 07:52:16 -0400 Subject: random: make 'add_interrupt_randomness()' do something sane We've been moving away from add_interrupt_randomness() for various reasons: it's too expensive to do on every interrupt, and flooding the CPU with interrupts could theoretically cause bogus floods of entropy from a somewhat externally controllable source. This solves both problems by limiting the actual randomness addition to just once a second or after 64 interrupts, whicever comes first. During that time, the interrupt cycle data is buffered up in a per-cpu pool. Also, we make sure the the nonblocking pool used by urandom is initialized before we start feeding the normal input pool. This assures that /dev/urandom is returning unpredictable data as soon as possible. (Based on an original patch by Linus, but significantly modified by tytso.) Tested-by: Eric Wustrow Reported-by: Eric Wustrow Reported-by: Nadia Heninger Reported-by: Zakir Durumeric Reported-by: J. Alex Halderman . Signed-off-by: Linus Torvalds Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- include/linux/random.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/random.h b/include/linux/random.h index 8f74538c96db..6ef39d7f2db1 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -52,7 +52,7 @@ extern void rand_initialize_irq(int irq); extern void add_input_randomness(unsigned int type, unsigned int code, unsigned int value); -extern void add_interrupt_randomness(int irq); +extern void add_interrupt_randomness(int irq, int irq_flags); extern void get_random_bytes(void *buf, int nbytes); void generate_random_uuid(unsigned char uuid_out[16]); -- cgit v1.2.3 From a2080a67abe9e314f9e9c2cc3a4a176e8a8f8793 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 4 Jul 2012 11:16:01 -0400 Subject: random: create add_device_randomness() interface Add a new interface, add_device_randomness() for adding data to the random pool that is likely to differ between two devices (or possibly even per boot). This would be things like MAC addresses or serial numbers, or the read-out of the RTC. This does *not* add any actual entropy to the pool, but it initializes the pool to different values for devices that might otherwise be identical and have very little entropy available to them (particularly common in the embedded world). [ Modified by tytso to mix in a timestamp, since there may be some variability caused by the time needed to detect/configure the hardware in question. ] Signed-off-by: Linus Torvalds Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- include/linux/random.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/random.h b/include/linux/random.h index 6ef39d7f2db1..e14b4387354a 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -50,6 +50,7 @@ struct rnd_state { extern void rand_initialize_irq(int irq); +extern void add_device_randomness(const void *, unsigned int); extern void add_input_randomness(unsigned int type, unsigned int code, unsigned int value); extern void add_interrupt_randomness(int irq, int irq_flags); -- cgit v1.2.3 From c2557a303ab6712bb6e09447df828c557c710ac9 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 5 Jul 2012 10:35:23 -0400 Subject: random: add new get_random_bytes_arch() function Create a new function, get_random_bytes_arch() which will use the architecture-specific hardware random number generator if it is present. Change get_random_bytes() to not use the HW RNG, even if it is avaiable. The reason for this is that the hw random number generator is fast (if it is present), but it requires that we trust the hardware manufacturer to have not put in a back door. (For example, an increasing counter encrypted by an AES key known to the NSA.) It's unlikely that Intel (for example) was paid off by the US Government to do this, but it's impossible for them to prove otherwise --- especially since Bull Mountain is documented to use AES as a whitener. Hence, the output of an evil, trojan-horse version of RDRAND is statistically indistinguishable from an RDRAND implemented to the specifications claimed by Intel. Short of using a tunnelling electronic microscope to reverse engineer an Ivy Bridge chip and disassembling and analyzing the CPU microcode, there's no way for us to tell for sure. Since users of get_random_bytes() in the Linux kernel need to be able to support hardware systems where the HW RNG is not present, most time-sensitive users of this interface have already created their own cryptographic RNG interface which uses get_random_bytes() as a seed. So it's much better to use the HW RNG to improve the existing random number generator, by mixing in any entropy returned by the HW RNG into /dev/random's entropy pool, but to always _use_ /dev/random's entropy pool. This way we get almost of the benefits of the HW RNG without any potential liabilities. The only benefits we forgo is the speed/performance enhancements --- and generic kernel code can't depend on depend on get_random_bytes() having the speed of a HW RNG anyway. For those places that really want access to the arch-specific HW RNG, if it is available, we provide get_random_bytes_arch(). Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- include/linux/random.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/random.h b/include/linux/random.h index e14b4387354a..29e217a7e6d0 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -56,6 +56,7 @@ extern void add_input_randomness(unsigned int type, unsigned int code, extern void add_interrupt_randomness(int irq, int irq_flags); extern void get_random_bytes(void *buf, int nbytes); +extern void get_random_bytes_arch(void *buf, int nbytes); void generate_random_uuid(unsigned char uuid_out[16]); #ifndef MODULE -- cgit v1.2.3 From 4afc89d66c60a372ec15e99eee93621f650b5d17 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sjur=20Br=C3=A6ndeland?= Date: Tue, 19 Jun 2012 10:08:18 +0300 Subject: remoteproc: Support custom firmware handlers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Firmware handling is made customizable. This is done by creating a separate ops structure for the firmware functions that depends on a particular firmware format (such as ELF). The ELF functions are default used unless the HW driver explicitly injects another firmware handler by updating rproc->fw_ops. The function rproc_da_to_va() is exported, as custom firmware handlers may need to use this function. Signed-off-by: Sjur Brændeland [ohad: namespace fixes, whitespace fixes, style fixes] Signed-off-by: Ohad Ben-Cohen --- include/linux/remoteproc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index eea3ac86b2b7..131b53957b9f 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -369,6 +369,7 @@ enum rproc_state { * @priv: private data which belongs to the platform-specific rproc module * @ops: platform-specific start/stop rproc handlers * @dev: virtual device for refcounting and common remoteproc behavior + * @fw_ops: firmware-specific handlers * @power: refcount of users who need this rproc powered up * @state: state of the device * @lock: lock which protects concurrent manipulations of the rproc @@ -391,6 +392,7 @@ struct rproc { void *priv; const struct rproc_ops *ops; struct device dev; + const struct rproc_fw_ops *fw_ops; atomic_t power; unsigned int state; struct mutex lock; -- cgit v1.2.3 From 66c9fbb9895499ff3aede96845968138a5bec8ab Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Wed, 11 Jul 2012 21:06:40 +0900 Subject: mfd: Rename s5m file and directories to samsung Previously, Samsung PMIC naming rule start with prefix of s5m. But Naming rule is changed. From now on, Prefix will be changed to s2m. So, To support pmic series of s5m and s2m, change mfd file and directory name. Signed-off-by: Sangbeom Kim Signed-off-by: Samuel Ortiz --- include/linux/mfd/s5m87xx/s5m-core.h | 374 ----------------------------------- include/linux/mfd/s5m87xx/s5m-pmic.h | 129 ------------ include/linux/mfd/s5m87xx/s5m-rtc.h | 84 -------- include/linux/mfd/samsung/s5m-core.h | 374 +++++++++++++++++++++++++++++++++++ include/linux/mfd/samsung/s5m-pmic.h | 129 ++++++++++++ include/linux/mfd/samsung/s5m-rtc.h | 84 ++++++++ 6 files changed, 587 insertions(+), 587 deletions(-) delete mode 100644 include/linux/mfd/s5m87xx/s5m-core.h delete mode 100644 include/linux/mfd/s5m87xx/s5m-pmic.h delete mode 100644 include/linux/mfd/s5m87xx/s5m-rtc.h create mode 100644 include/linux/mfd/samsung/s5m-core.h create mode 100644 include/linux/mfd/samsung/s5m-pmic.h create mode 100644 include/linux/mfd/samsung/s5m-rtc.h (limited to 'include/linux') diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h deleted file mode 100644 index 21603b42f22f..000000000000 --- a/include/linux/mfd/s5m87xx/s5m-core.h +++ /dev/null @@ -1,374 +0,0 @@ -/* - * s5m-core.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MFD_S5M_CORE_H -#define __LINUX_MFD_S5M_CORE_H - -#define NUM_IRQ_REGS 4 - -enum s5m_device_type { - S5M8751X, - S5M8763X, - S5M8767X, -}; - -/* S5M8767 registers */ -enum s5m8767_reg { - S5M8767_REG_ID, - S5M8767_REG_INT1, - S5M8767_REG_INT2, - S5M8767_REG_INT3, - S5M8767_REG_INT1M, - S5M8767_REG_INT2M, - S5M8767_REG_INT3M, - S5M8767_REG_STATUS1, - S5M8767_REG_STATUS2, - S5M8767_REG_STATUS3, - S5M8767_REG_CTRL1, - S5M8767_REG_CTRL2, - S5M8767_REG_LOWBAT1, - S5M8767_REG_LOWBAT2, - S5M8767_REG_BUCHG, - S5M8767_REG_DVSRAMP, - S5M8767_REG_DVSTIMER2 = 0x10, - S5M8767_REG_DVSTIMER3, - S5M8767_REG_DVSTIMER4, - S5M8767_REG_LDO1, - S5M8767_REG_LDO2, - S5M8767_REG_LDO3, - S5M8767_REG_LDO4, - S5M8767_REG_LDO5, - S5M8767_REG_LDO6, - S5M8767_REG_LDO7, - S5M8767_REG_LDO8, - S5M8767_REG_LDO9, - S5M8767_REG_LDO10, - S5M8767_REG_LDO11, - S5M8767_REG_LDO12, - S5M8767_REG_LDO13, - S5M8767_REG_LDO14 = 0x20, - S5M8767_REG_LDO15, - S5M8767_REG_LDO16, - S5M8767_REG_LDO17, - S5M8767_REG_LDO18, - S5M8767_REG_LDO19, - S5M8767_REG_LDO20, - S5M8767_REG_LDO21, - S5M8767_REG_LDO22, - S5M8767_REG_LDO23, - S5M8767_REG_LDO24, - S5M8767_REG_LDO25, - S5M8767_REG_LDO26, - S5M8767_REG_LDO27, - S5M8767_REG_LDO28, - S5M8767_REG_UVLO = 0x31, - S5M8767_REG_BUCK1CTRL1, - S5M8767_REG_BUCK1CTRL2, - S5M8767_REG_BUCK2CTRL, - S5M8767_REG_BUCK2DVS1, - S5M8767_REG_BUCK2DVS2, - S5M8767_REG_BUCK2DVS3, - S5M8767_REG_BUCK2DVS4, - S5M8767_REG_BUCK2DVS5, - S5M8767_REG_BUCK2DVS6, - S5M8767_REG_BUCK2DVS7, - S5M8767_REG_BUCK2DVS8, - S5M8767_REG_BUCK3CTRL, - S5M8767_REG_BUCK3DVS1, - S5M8767_REG_BUCK3DVS2, - S5M8767_REG_BUCK3DVS3, - S5M8767_REG_BUCK3DVS4, - S5M8767_REG_BUCK3DVS5, - S5M8767_REG_BUCK3DVS6, - S5M8767_REG_BUCK3DVS7, - S5M8767_REG_BUCK3DVS8, - S5M8767_REG_BUCK4CTRL, - S5M8767_REG_BUCK4DVS1, - S5M8767_REG_BUCK4DVS2, - S5M8767_REG_BUCK4DVS3, - S5M8767_REG_BUCK4DVS4, - S5M8767_REG_BUCK4DVS5, - S5M8767_REG_BUCK4DVS6, - S5M8767_REG_BUCK4DVS7, - S5M8767_REG_BUCK4DVS8, - S5M8767_REG_BUCK5CTRL1, - S5M8767_REG_BUCK5CTRL2, - S5M8767_REG_BUCK5CTRL3, - S5M8767_REG_BUCK5CTRL4, - S5M8767_REG_BUCK5CTRL5, - S5M8767_REG_BUCK6CTRL1, - S5M8767_REG_BUCK6CTRL2, - S5M8767_REG_BUCK7CTRL1, - S5M8767_REG_BUCK7CTRL2, - S5M8767_REG_BUCK8CTRL1, - S5M8767_REG_BUCK8CTRL2, - S5M8767_REG_BUCK9CTRL1, - S5M8767_REG_BUCK9CTRL2, - S5M8767_REG_LDO1CTRL, - S5M8767_REG_LDO2_1CTRL, - S5M8767_REG_LDO2_2CTRL, - S5M8767_REG_LDO2_3CTRL, - S5M8767_REG_LDO2_4CTRL, - S5M8767_REG_LDO3CTRL, - S5M8767_REG_LDO4CTRL, - S5M8767_REG_LDO5CTRL, - S5M8767_REG_LDO6CTRL, - S5M8767_REG_LDO7CTRL, - S5M8767_REG_LDO8CTRL, - S5M8767_REG_LDO9CTRL, - S5M8767_REG_LDO10CTRL, - S5M8767_REG_LDO11CTRL, - S5M8767_REG_LDO12CTRL, - S5M8767_REG_LDO13CTRL, - S5M8767_REG_LDO14CTRL, - S5M8767_REG_LDO15CTRL, - S5M8767_REG_LDO16CTRL, - S5M8767_REG_LDO17CTRL, - S5M8767_REG_LDO18CTRL, - S5M8767_REG_LDO19CTRL, - S5M8767_REG_LDO20CTRL, - S5M8767_REG_LDO21CTRL, - S5M8767_REG_LDO22CTRL, - S5M8767_REG_LDO23CTRL, - S5M8767_REG_LDO24CTRL, - S5M8767_REG_LDO25CTRL, - S5M8767_REG_LDO26CTRL, - S5M8767_REG_LDO27CTRL, - S5M8767_REG_LDO28CTRL, -}; - -/* S5M8763 registers */ -enum s5m8763_reg { - S5M8763_REG_IRQ1, - S5M8763_REG_IRQ2, - S5M8763_REG_IRQ3, - S5M8763_REG_IRQ4, - S5M8763_REG_IRQM1, - S5M8763_REG_IRQM2, - S5M8763_REG_IRQM3, - S5M8763_REG_IRQM4, - S5M8763_REG_STATUS1, - S5M8763_REG_STATUS2, - S5M8763_REG_STATUSM1, - S5M8763_REG_STATUSM2, - S5M8763_REG_CHGR1, - S5M8763_REG_CHGR2, - S5M8763_REG_LDO_ACTIVE_DISCHARGE1, - S5M8763_REG_LDO_ACTIVE_DISCHARGE2, - S5M8763_REG_BUCK_ACTIVE_DISCHARGE3, - S5M8763_REG_ONOFF1, - S5M8763_REG_ONOFF2, - S5M8763_REG_ONOFF3, - S5M8763_REG_ONOFF4, - S5M8763_REG_BUCK1_VOLTAGE1, - S5M8763_REG_BUCK1_VOLTAGE2, - S5M8763_REG_BUCK1_VOLTAGE3, - S5M8763_REG_BUCK1_VOLTAGE4, - S5M8763_REG_BUCK2_VOLTAGE1, - S5M8763_REG_BUCK2_VOLTAGE2, - S5M8763_REG_BUCK3, - S5M8763_REG_BUCK4, - S5M8763_REG_LDO1_LDO2, - S5M8763_REG_LDO3, - S5M8763_REG_LDO4, - S5M8763_REG_LDO5, - S5M8763_REG_LDO6, - S5M8763_REG_LDO7, - S5M8763_REG_LDO7_LDO8, - S5M8763_REG_LDO9_LDO10, - S5M8763_REG_LDO11, - S5M8763_REG_LDO12, - S5M8763_REG_LDO13, - S5M8763_REG_LDO14, - S5M8763_REG_LDO15, - S5M8763_REG_LDO16, - S5M8763_REG_BKCHR, - S5M8763_REG_LBCNFG1, - S5M8763_REG_LBCNFG2, -}; - -enum s5m8767_irq { - S5M8767_IRQ_PWRR, - S5M8767_IRQ_PWRF, - S5M8767_IRQ_PWR1S, - S5M8767_IRQ_JIGR, - S5M8767_IRQ_JIGF, - S5M8767_IRQ_LOWBAT2, - S5M8767_IRQ_LOWBAT1, - - S5M8767_IRQ_MRB, - S5M8767_IRQ_DVSOK2, - S5M8767_IRQ_DVSOK3, - S5M8767_IRQ_DVSOK4, - - S5M8767_IRQ_RTC60S, - S5M8767_IRQ_RTCA1, - S5M8767_IRQ_RTCA2, - S5M8767_IRQ_SMPL, - S5M8767_IRQ_RTC1S, - S5M8767_IRQ_WTSR, - - S5M8767_IRQ_NR, -}; - -#define S5M8767_IRQ_PWRR_MASK (1 << 0) -#define S5M8767_IRQ_PWRF_MASK (1 << 1) -#define S5M8767_IRQ_PWR1S_MASK (1 << 3) -#define S5M8767_IRQ_JIGR_MASK (1 << 4) -#define S5M8767_IRQ_JIGF_MASK (1 << 5) -#define S5M8767_IRQ_LOWBAT2_MASK (1 << 6) -#define S5M8767_IRQ_LOWBAT1_MASK (1 << 7) - -#define S5M8767_IRQ_MRB_MASK (1 << 2) -#define S5M8767_IRQ_DVSOK2_MASK (1 << 3) -#define S5M8767_IRQ_DVSOK3_MASK (1 << 4) -#define S5M8767_IRQ_DVSOK4_MASK (1 << 5) - -#define S5M8767_IRQ_RTC60S_MASK (1 << 0) -#define S5M8767_IRQ_RTCA1_MASK (1 << 1) -#define S5M8767_IRQ_RTCA2_MASK (1 << 2) -#define S5M8767_IRQ_SMPL_MASK (1 << 3) -#define S5M8767_IRQ_RTC1S_MASK (1 << 4) -#define S5M8767_IRQ_WTSR_MASK (1 << 5) - -enum s5m8763_irq { - S5M8763_IRQ_DCINF, - S5M8763_IRQ_DCINR, - S5M8763_IRQ_JIGF, - S5M8763_IRQ_JIGR, - S5M8763_IRQ_PWRONF, - S5M8763_IRQ_PWRONR, - - S5M8763_IRQ_WTSREVNT, - S5M8763_IRQ_SMPLEVNT, - S5M8763_IRQ_ALARM1, - S5M8763_IRQ_ALARM0, - - S5M8763_IRQ_ONKEY1S, - S5M8763_IRQ_TOPOFFR, - S5M8763_IRQ_DCINOVPR, - S5M8763_IRQ_CHGRSTF, - S5M8763_IRQ_DONER, - S5M8763_IRQ_CHGFAULT, - - S5M8763_IRQ_LOBAT1, - S5M8763_IRQ_LOBAT2, - - S5M8763_IRQ_NR, -}; - -#define S5M8763_IRQ_DCINF_MASK (1 << 2) -#define S5M8763_IRQ_DCINR_MASK (1 << 3) -#define S5M8763_IRQ_JIGF_MASK (1 << 4) -#define S5M8763_IRQ_JIGR_MASK (1 << 5) -#define S5M8763_IRQ_PWRONF_MASK (1 << 6) -#define S5M8763_IRQ_PWRONR_MASK (1 << 7) - -#define S5M8763_IRQ_WTSREVNT_MASK (1 << 0) -#define S5M8763_IRQ_SMPLEVNT_MASK (1 << 1) -#define S5M8763_IRQ_ALARM1_MASK (1 << 2) -#define S5M8763_IRQ_ALARM0_MASK (1 << 3) - -#define S5M8763_IRQ_ONKEY1S_MASK (1 << 0) -#define S5M8763_IRQ_TOPOFFR_MASK (1 << 2) -#define S5M8763_IRQ_DCINOVPR_MASK (1 << 3) -#define S5M8763_IRQ_CHGRSTF_MASK (1 << 4) -#define S5M8763_IRQ_DONER_MASK (1 << 5) -#define S5M8763_IRQ_CHGFAULT_MASK (1 << 7) - -#define S5M8763_IRQ_LOBAT1_MASK (1 << 0) -#define S5M8763_IRQ_LOBAT2_MASK (1 << 1) - -#define S5M8763_ENRAMP (1 << 4) - -/** - * struct s5m87xx_dev - s5m87xx master device for sub-drivers - * @dev: master device of the chip (can be used to access platform data) - * @i2c: i2c client private data for regulator - * @rtc: i2c client private data for rtc - * @iolock: mutex for serializing io access - * @irqlock: mutex for buslock - * @irq_base: base IRQ number for s5m87xx, required for IRQs - * @irq: generic IRQ number for s5m87xx - * @ono: power onoff IRQ number for s5m87xx - * @irq_masks_cur: currently active value - * @irq_masks_cache: cached hardware value - * @type: indicate which s5m87xx "variant" is used - */ -struct s5m87xx_dev { - struct device *dev; - struct regmap *regmap; - struct i2c_client *i2c; - struct i2c_client *rtc; - struct mutex iolock; - struct mutex irqlock; - - int device_type; - int irq_base; - int irq; - int ono; - u8 irq_masks_cur[NUM_IRQ_REGS]; - u8 irq_masks_cache[NUM_IRQ_REGS]; - int type; - bool wakeup; -}; - -int s5m_irq_init(struct s5m87xx_dev *s5m87xx); -void s5m_irq_exit(struct s5m87xx_dev *s5m87xx); -int s5m_irq_resume(struct s5m87xx_dev *s5m87xx); - -extern int s5m_reg_read(struct s5m87xx_dev *s5m87xx, u8 reg, void *dest); -extern int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); -extern int s5m_reg_write(struct s5m87xx_dev *s5m87xx, u8 reg, u8 value); -extern int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); -extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask); - -struct s5m_platform_data { - struct s5m_regulator_data *regulators; - struct s5m_opmode_data *opmode; - int device_type; - int num_regulators; - - int irq_base; - int (*cfg_pmic_irq)(void); - - int ono; - bool wakeup; - bool buck_voltage_lock; - - int buck_gpios[3]; - int buck2_voltage[8]; - bool buck2_gpiodvs; - int buck3_voltage[8]; - bool buck3_gpiodvs; - int buck4_voltage[8]; - bool buck4_gpiodvs; - - int buck_set1; - int buck_set2; - int buck_set3; - int buck2_enable; - int buck3_enable; - int buck4_enable; - int buck_default_idx; - int buck2_default_idx; - int buck3_default_idx; - int buck4_default_idx; - - int buck_ramp_delay; - bool buck2_ramp_enable; - bool buck3_ramp_enable; - bool buck4_ramp_enable; -}; - -#endif /* __LINUX_MFD_S5M_CORE_H */ diff --git a/include/linux/mfd/s5m87xx/s5m-pmic.h b/include/linux/mfd/s5m87xx/s5m-pmic.h deleted file mode 100644 index 7c719f20f58a..000000000000 --- a/include/linux/mfd/s5m87xx/s5m-pmic.h +++ /dev/null @@ -1,129 +0,0 @@ -/* s5m87xx.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __LINUX_MFD_S5M_PMIC_H -#define __LINUX_MFD_S5M_PMIC_H - -#include - -/* S5M8767 regulator ids */ -enum s5m8767_regulators { - S5M8767_LDO1, - S5M8767_LDO2, - S5M8767_LDO3, - S5M8767_LDO4, - S5M8767_LDO5, - S5M8767_LDO6, - S5M8767_LDO7, - S5M8767_LDO8, - S5M8767_LDO9, - S5M8767_LDO10, - S5M8767_LDO11, - S5M8767_LDO12, - S5M8767_LDO13, - S5M8767_LDO14, - S5M8767_LDO15, - S5M8767_LDO16, - S5M8767_LDO17, - S5M8767_LDO18, - S5M8767_LDO19, - S5M8767_LDO20, - S5M8767_LDO21, - S5M8767_LDO22, - S5M8767_LDO23, - S5M8767_LDO24, - S5M8767_LDO25, - S5M8767_LDO26, - S5M8767_LDO27, - S5M8767_LDO28, - S5M8767_BUCK1, - S5M8767_BUCK2, - S5M8767_BUCK3, - S5M8767_BUCK4, - S5M8767_BUCK5, - S5M8767_BUCK6, - S5M8767_BUCK7, - S5M8767_BUCK8, - S5M8767_BUCK9, - S5M8767_AP_EN32KHZ, - S5M8767_CP_EN32KHZ, - - S5M8767_REG_MAX, -}; - -#define S5M8767_ENCTRL_SHIFT 6 - -/* S5M8763 regulator ids */ -enum s5m8763_regulators { - S5M8763_LDO1, - S5M8763_LDO2, - S5M8763_LDO3, - S5M8763_LDO4, - S5M8763_LDO5, - S5M8763_LDO6, - S5M8763_LDO7, - S5M8763_LDO8, - S5M8763_LDO9, - S5M8763_LDO10, - S5M8763_LDO11, - S5M8763_LDO12, - S5M8763_LDO13, - S5M8763_LDO14, - S5M8763_LDO15, - S5M8763_LDO16, - S5M8763_BUCK1, - S5M8763_BUCK2, - S5M8763_BUCK3, - S5M8763_BUCK4, - S5M8763_AP_EN32KHZ, - S5M8763_CP_EN32KHZ, - S5M8763_ENCHGVI, - S5M8763_ESAFEUSB1, - S5M8763_ESAFEUSB2, -}; - -/** - * s5m87xx_regulator_data - regulator data - * @id: regulator id - * @initdata: regulator init data (contraints, supplies, ...) - */ -struct s5m_regulator_data { - int id; - struct regulator_init_data *initdata; -}; - -/* - * s5m_opmode_data - regulator operation mode data - * @id: regulator id - * @mode: regulator operation mode - */ -struct s5m_opmode_data { - int id; - int mode; -}; - -/* - * s5m regulator operation mode - * S5M_OPMODE_OFF Regulator always OFF - * S5M_OPMODE_ON Regulator always ON - * S5M_OPMODE_LOWPOWER Regulator is on in low-power mode - * S5M_OPMODE_SUSPEND Regulator is changed by PWREN pin - * If PWREN is high, regulator is on - * If PWREN is low, regulator is off - */ - -enum s5m_opmode { - S5M_OPMODE_OFF, - S5M_OPMODE_ON, - S5M_OPMODE_LOWPOWER, - S5M_OPMODE_SUSPEND, -}; - -#endif /* __LINUX_MFD_S5M_PMIC_H */ diff --git a/include/linux/mfd/s5m87xx/s5m-rtc.h b/include/linux/mfd/s5m87xx/s5m-rtc.h deleted file mode 100644 index 6ce8da264cec..000000000000 --- a/include/linux/mfd/s5m87xx/s5m-rtc.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * s5m-rtc.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MFD_S5M_RTC_H -#define __LINUX_MFD_S5M_RTC_H - -enum s5m87xx_rtc_reg { - S5M87XX_RTC_SEC, - S5M87XX_RTC_MIN, - S5M87XX_RTC_HOUR, - S5M87XX_RTC_WEEKDAY, - S5M87XX_RTC_DATE, - S5M87XX_RTC_MONTH, - S5M87XX_RTC_YEAR1, - S5M87XX_RTC_YEAR2, - S5M87XX_ALARM0_SEC, - S5M87XX_ALARM0_MIN, - S5M87XX_ALARM0_HOUR, - S5M87XX_ALARM0_WEEKDAY, - S5M87XX_ALARM0_DATE, - S5M87XX_ALARM0_MONTH, - S5M87XX_ALARM0_YEAR1, - S5M87XX_ALARM0_YEAR2, - S5M87XX_ALARM1_SEC, - S5M87XX_ALARM1_MIN, - S5M87XX_ALARM1_HOUR, - S5M87XX_ALARM1_WEEKDAY, - S5M87XX_ALARM1_DATE, - S5M87XX_ALARM1_MONTH, - S5M87XX_ALARM1_YEAR1, - S5M87XX_ALARM1_YEAR2, - S5M87XX_ALARM0_CONF, - S5M87XX_ALARM1_CONF, - S5M87XX_RTC_STATUS, - S5M87XX_WTSR_SMPL_CNTL, - S5M87XX_RTC_UDR_CON, -}; - -#define RTC_I2C_ADDR (0x0C >> 1) - -#define HOUR_12 (1 << 7) -#define HOUR_AMPM (1 << 6) -#define HOUR_PM (1 << 5) -#define ALARM0_STATUS (1 << 1) -#define ALARM1_STATUS (1 << 2) -#define UPDATE_AD (1 << 0) - -/* RTC Control Register */ -#define BCD_EN_SHIFT 0 -#define BCD_EN_MASK (1 << BCD_EN_SHIFT) -#define MODEL24_SHIFT 1 -#define MODEL24_MASK (1 << MODEL24_SHIFT) -/* RTC Update Register1 */ -#define RTC_UDR_SHIFT 0 -#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) -/* RTC Hour register */ -#define HOUR_PM_SHIFT 6 -#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT) -/* RTC Alarm Enable */ -#define ALARM_ENABLE_SHIFT 7 -#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT) - -enum { - RTC_SEC = 0, - RTC_MIN, - RTC_HOUR, - RTC_WEEKDAY, - RTC_DATE, - RTC_MONTH, - RTC_YEAR1, - RTC_YEAR2, -}; - -#endif /* __LINUX_MFD_S5M_RTC_H */ diff --git a/include/linux/mfd/samsung/s5m-core.h b/include/linux/mfd/samsung/s5m-core.h new file mode 100644 index 000000000000..7332ff608c85 --- /dev/null +++ b/include/linux/mfd/samsung/s5m-core.h @@ -0,0 +1,374 @@ +/* + * s5m-core.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S5M_CORE_H +#define __LINUX_MFD_S5M_CORE_H + +#define NUM_IRQ_REGS 4 + +enum s5m_device_type { + S5M8751X, + S5M8763X, + S5M8767X, +}; + +/* S5M8767 registers */ +enum s5m8767_reg { + S5M8767_REG_ID, + S5M8767_REG_INT1, + S5M8767_REG_INT2, + S5M8767_REG_INT3, + S5M8767_REG_INT1M, + S5M8767_REG_INT2M, + S5M8767_REG_INT3M, + S5M8767_REG_STATUS1, + S5M8767_REG_STATUS2, + S5M8767_REG_STATUS3, + S5M8767_REG_CTRL1, + S5M8767_REG_CTRL2, + S5M8767_REG_LOWBAT1, + S5M8767_REG_LOWBAT2, + S5M8767_REG_BUCHG, + S5M8767_REG_DVSRAMP, + S5M8767_REG_DVSTIMER2 = 0x10, + S5M8767_REG_DVSTIMER3, + S5M8767_REG_DVSTIMER4, + S5M8767_REG_LDO1, + S5M8767_REG_LDO2, + S5M8767_REG_LDO3, + S5M8767_REG_LDO4, + S5M8767_REG_LDO5, + S5M8767_REG_LDO6, + S5M8767_REG_LDO7, + S5M8767_REG_LDO8, + S5M8767_REG_LDO9, + S5M8767_REG_LDO10, + S5M8767_REG_LDO11, + S5M8767_REG_LDO12, + S5M8767_REG_LDO13, + S5M8767_REG_LDO14 = 0x20, + S5M8767_REG_LDO15, + S5M8767_REG_LDO16, + S5M8767_REG_LDO17, + S5M8767_REG_LDO18, + S5M8767_REG_LDO19, + S5M8767_REG_LDO20, + S5M8767_REG_LDO21, + S5M8767_REG_LDO22, + S5M8767_REG_LDO23, + S5M8767_REG_LDO24, + S5M8767_REG_LDO25, + S5M8767_REG_LDO26, + S5M8767_REG_LDO27, + S5M8767_REG_LDO28, + S5M8767_REG_UVLO = 0x31, + S5M8767_REG_BUCK1CTRL1, + S5M8767_REG_BUCK1CTRL2, + S5M8767_REG_BUCK2CTRL, + S5M8767_REG_BUCK2DVS1, + S5M8767_REG_BUCK2DVS2, + S5M8767_REG_BUCK2DVS3, + S5M8767_REG_BUCK2DVS4, + S5M8767_REG_BUCK2DVS5, + S5M8767_REG_BUCK2DVS6, + S5M8767_REG_BUCK2DVS7, + S5M8767_REG_BUCK2DVS8, + S5M8767_REG_BUCK3CTRL, + S5M8767_REG_BUCK3DVS1, + S5M8767_REG_BUCK3DVS2, + S5M8767_REG_BUCK3DVS3, + S5M8767_REG_BUCK3DVS4, + S5M8767_REG_BUCK3DVS5, + S5M8767_REG_BUCK3DVS6, + S5M8767_REG_BUCK3DVS7, + S5M8767_REG_BUCK3DVS8, + S5M8767_REG_BUCK4CTRL, + S5M8767_REG_BUCK4DVS1, + S5M8767_REG_BUCK4DVS2, + S5M8767_REG_BUCK4DVS3, + S5M8767_REG_BUCK4DVS4, + S5M8767_REG_BUCK4DVS5, + S5M8767_REG_BUCK4DVS6, + S5M8767_REG_BUCK4DVS7, + S5M8767_REG_BUCK4DVS8, + S5M8767_REG_BUCK5CTRL1, + S5M8767_REG_BUCK5CTRL2, + S5M8767_REG_BUCK5CTRL3, + S5M8767_REG_BUCK5CTRL4, + S5M8767_REG_BUCK5CTRL5, + S5M8767_REG_BUCK6CTRL1, + S5M8767_REG_BUCK6CTRL2, + S5M8767_REG_BUCK7CTRL1, + S5M8767_REG_BUCK7CTRL2, + S5M8767_REG_BUCK8CTRL1, + S5M8767_REG_BUCK8CTRL2, + S5M8767_REG_BUCK9CTRL1, + S5M8767_REG_BUCK9CTRL2, + S5M8767_REG_LDO1CTRL, + S5M8767_REG_LDO2_1CTRL, + S5M8767_REG_LDO2_2CTRL, + S5M8767_REG_LDO2_3CTRL, + S5M8767_REG_LDO2_4CTRL, + S5M8767_REG_LDO3CTRL, + S5M8767_REG_LDO4CTRL, + S5M8767_REG_LDO5CTRL, + S5M8767_REG_LDO6CTRL, + S5M8767_REG_LDO7CTRL, + S5M8767_REG_LDO8CTRL, + S5M8767_REG_LDO9CTRL, + S5M8767_REG_LDO10CTRL, + S5M8767_REG_LDO11CTRL, + S5M8767_REG_LDO12CTRL, + S5M8767_REG_LDO13CTRL, + S5M8767_REG_LDO14CTRL, + S5M8767_REG_LDO15CTRL, + S5M8767_REG_LDO16CTRL, + S5M8767_REG_LDO17CTRL, + S5M8767_REG_LDO18CTRL, + S5M8767_REG_LDO19CTRL, + S5M8767_REG_LDO20CTRL, + S5M8767_REG_LDO21CTRL, + S5M8767_REG_LDO22CTRL, + S5M8767_REG_LDO23CTRL, + S5M8767_REG_LDO24CTRL, + S5M8767_REG_LDO25CTRL, + S5M8767_REG_LDO26CTRL, + S5M8767_REG_LDO27CTRL, + S5M8767_REG_LDO28CTRL, +}; + +/* S5M8763 registers */ +enum s5m8763_reg { + S5M8763_REG_IRQ1, + S5M8763_REG_IRQ2, + S5M8763_REG_IRQ3, + S5M8763_REG_IRQ4, + S5M8763_REG_IRQM1, + S5M8763_REG_IRQM2, + S5M8763_REG_IRQM3, + S5M8763_REG_IRQM4, + S5M8763_REG_STATUS1, + S5M8763_REG_STATUS2, + S5M8763_REG_STATUSM1, + S5M8763_REG_STATUSM2, + S5M8763_REG_CHGR1, + S5M8763_REG_CHGR2, + S5M8763_REG_LDO_ACTIVE_DISCHARGE1, + S5M8763_REG_LDO_ACTIVE_DISCHARGE2, + S5M8763_REG_BUCK_ACTIVE_DISCHARGE3, + S5M8763_REG_ONOFF1, + S5M8763_REG_ONOFF2, + S5M8763_REG_ONOFF3, + S5M8763_REG_ONOFF4, + S5M8763_REG_BUCK1_VOLTAGE1, + S5M8763_REG_BUCK1_VOLTAGE2, + S5M8763_REG_BUCK1_VOLTAGE3, + S5M8763_REG_BUCK1_VOLTAGE4, + S5M8763_REG_BUCK2_VOLTAGE1, + S5M8763_REG_BUCK2_VOLTAGE2, + S5M8763_REG_BUCK3, + S5M8763_REG_BUCK4, + S5M8763_REG_LDO1_LDO2, + S5M8763_REG_LDO3, + S5M8763_REG_LDO4, + S5M8763_REG_LDO5, + S5M8763_REG_LDO6, + S5M8763_REG_LDO7, + S5M8763_REG_LDO7_LDO8, + S5M8763_REG_LDO9_LDO10, + S5M8763_REG_LDO11, + S5M8763_REG_LDO12, + S5M8763_REG_LDO13, + S5M8763_REG_LDO14, + S5M8763_REG_LDO15, + S5M8763_REG_LDO16, + S5M8763_REG_BKCHR, + S5M8763_REG_LBCNFG1, + S5M8763_REG_LBCNFG2, +}; + +enum s5m8767_irq { + S5M8767_IRQ_PWRR, + S5M8767_IRQ_PWRF, + S5M8767_IRQ_PWR1S, + S5M8767_IRQ_JIGR, + S5M8767_IRQ_JIGF, + S5M8767_IRQ_LOWBAT2, + S5M8767_IRQ_LOWBAT1, + + S5M8767_IRQ_MRB, + S5M8767_IRQ_DVSOK2, + S5M8767_IRQ_DVSOK3, + S5M8767_IRQ_DVSOK4, + + S5M8767_IRQ_RTC60S, + S5M8767_IRQ_RTCA1, + S5M8767_IRQ_RTCA2, + S5M8767_IRQ_SMPL, + S5M8767_IRQ_RTC1S, + S5M8767_IRQ_WTSR, + + S5M8767_IRQ_NR, +}; + +#define S5M8767_IRQ_PWRR_MASK (1 << 0) +#define S5M8767_IRQ_PWRF_MASK (1 << 1) +#define S5M8767_IRQ_PWR1S_MASK (1 << 3) +#define S5M8767_IRQ_JIGR_MASK (1 << 4) +#define S5M8767_IRQ_JIGF_MASK (1 << 5) +#define S5M8767_IRQ_LOWBAT2_MASK (1 << 6) +#define S5M8767_IRQ_LOWBAT1_MASK (1 << 7) + +#define S5M8767_IRQ_MRB_MASK (1 << 2) +#define S5M8767_IRQ_DVSOK2_MASK (1 << 3) +#define S5M8767_IRQ_DVSOK3_MASK (1 << 4) +#define S5M8767_IRQ_DVSOK4_MASK (1 << 5) + +#define S5M8767_IRQ_RTC60S_MASK (1 << 0) +#define S5M8767_IRQ_RTCA1_MASK (1 << 1) +#define S5M8767_IRQ_RTCA2_MASK (1 << 2) +#define S5M8767_IRQ_SMPL_MASK (1 << 3) +#define S5M8767_IRQ_RTC1S_MASK (1 << 4) +#define S5M8767_IRQ_WTSR_MASK (1 << 5) + +enum s5m8763_irq { + S5M8763_IRQ_DCINF, + S5M8763_IRQ_DCINR, + S5M8763_IRQ_JIGF, + S5M8763_IRQ_JIGR, + S5M8763_IRQ_PWRONF, + S5M8763_IRQ_PWRONR, + + S5M8763_IRQ_WTSREVNT, + S5M8763_IRQ_SMPLEVNT, + S5M8763_IRQ_ALARM1, + S5M8763_IRQ_ALARM0, + + S5M8763_IRQ_ONKEY1S, + S5M8763_IRQ_TOPOFFR, + S5M8763_IRQ_DCINOVPR, + S5M8763_IRQ_CHGRSTF, + S5M8763_IRQ_DONER, + S5M8763_IRQ_CHGFAULT, + + S5M8763_IRQ_LOBAT1, + S5M8763_IRQ_LOBAT2, + + S5M8763_IRQ_NR, +}; + +#define S5M8763_IRQ_DCINF_MASK (1 << 2) +#define S5M8763_IRQ_DCINR_MASK (1 << 3) +#define S5M8763_IRQ_JIGF_MASK (1 << 4) +#define S5M8763_IRQ_JIGR_MASK (1 << 5) +#define S5M8763_IRQ_PWRONF_MASK (1 << 6) +#define S5M8763_IRQ_PWRONR_MASK (1 << 7) + +#define S5M8763_IRQ_WTSREVNT_MASK (1 << 0) +#define S5M8763_IRQ_SMPLEVNT_MASK (1 << 1) +#define S5M8763_IRQ_ALARM1_MASK (1 << 2) +#define S5M8763_IRQ_ALARM0_MASK (1 << 3) + +#define S5M8763_IRQ_ONKEY1S_MASK (1 << 0) +#define S5M8763_IRQ_TOPOFFR_MASK (1 << 2) +#define S5M8763_IRQ_DCINOVPR_MASK (1 << 3) +#define S5M8763_IRQ_CHGRSTF_MASK (1 << 4) +#define S5M8763_IRQ_DONER_MASK (1 << 5) +#define S5M8763_IRQ_CHGFAULT_MASK (1 << 7) + +#define S5M8763_IRQ_LOBAT1_MASK (1 << 0) +#define S5M8763_IRQ_LOBAT2_MASK (1 << 1) + +#define S5M8763_ENRAMP (1 << 4) + +/** + * struct s5m87xx_dev - s5m87xx master device for sub-drivers + * @dev: master device of the chip (can be used to access platform data) + * @i2c: i2c client private data for regulator + * @rtc: i2c client private data for rtc + * @iolock: mutex for serializing io access + * @irqlock: mutex for buslock + * @irq_base: base IRQ number for s5m87xx, required for IRQs + * @irq: generic IRQ number for s5m87xx + * @ono: power onoff IRQ number for s5m87xx + * @irq_masks_cur: currently active value + * @irq_masks_cache: cached hardware value + * @type: indicate which s5m87xx "variant" is used + */ +struct s5m87xx_dev { + struct device *dev; + struct regmap *regmap; + struct i2c_client *i2c; + struct i2c_client *rtc; + struct mutex iolock; + struct mutex irqlock; + + int device_type; + int irq_base; + int irq; + int ono; + u8 irq_masks_cur[NUM_IRQ_REGS]; + u8 irq_masks_cache[NUM_IRQ_REGS]; + int type; + bool wakeup; +}; + +int s5m_irq_init(struct s5m87xx_dev *s5m87xx); +void s5m_irq_exit(struct s5m87xx_dev *s5m87xx); +int s5m_irq_resume(struct s5m87xx_dev *s5m87xx); + +extern int s5m_reg_read(struct s5m87xx_dev *s5m87xx, u8 reg, void *dest); +extern int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); +extern int s5m_reg_write(struct s5m87xx_dev *s5m87xx, u8 reg, u8 value); +extern int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); +extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask); + +struct s5m_platform_data { + struct s5m_regulator_data *regulators; + struct s5m_opmode_data *opmode; + int device_type; + int num_regulators; + + int irq_base; + int (*cfg_pmic_irq)(void); + + int ono; + bool wakeup; + bool buck_voltage_lock; + + int buck_gpios[3]; + int buck2_voltage[8]; + bool buck2_gpiodvs; + int buck3_voltage[8]; + bool buck3_gpiodvs; + int buck4_voltage[8]; + bool buck4_gpiodvs; + + int buck_set1; + int buck_set2; + int buck_set3; + int buck2_enable; + int buck3_enable; + int buck4_enable; + int buck_default_idx; + int buck2_default_idx; + int buck3_default_idx; + int buck4_default_idx; + + int buck_ramp_delay; + bool buck2_ramp_enable; + bool buck3_ramp_enable; + bool buck4_ramp_enable; +}; + +#endif /* __LINUX_MFD_S5M_CORE_H */ diff --git a/include/linux/mfd/samsung/s5m-pmic.h b/include/linux/mfd/samsung/s5m-pmic.h new file mode 100644 index 000000000000..7c719f20f58a --- /dev/null +++ b/include/linux/mfd/samsung/s5m-pmic.h @@ -0,0 +1,129 @@ +/* s5m87xx.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_MFD_S5M_PMIC_H +#define __LINUX_MFD_S5M_PMIC_H + +#include + +/* S5M8767 regulator ids */ +enum s5m8767_regulators { + S5M8767_LDO1, + S5M8767_LDO2, + S5M8767_LDO3, + S5M8767_LDO4, + S5M8767_LDO5, + S5M8767_LDO6, + S5M8767_LDO7, + S5M8767_LDO8, + S5M8767_LDO9, + S5M8767_LDO10, + S5M8767_LDO11, + S5M8767_LDO12, + S5M8767_LDO13, + S5M8767_LDO14, + S5M8767_LDO15, + S5M8767_LDO16, + S5M8767_LDO17, + S5M8767_LDO18, + S5M8767_LDO19, + S5M8767_LDO20, + S5M8767_LDO21, + S5M8767_LDO22, + S5M8767_LDO23, + S5M8767_LDO24, + S5M8767_LDO25, + S5M8767_LDO26, + S5M8767_LDO27, + S5M8767_LDO28, + S5M8767_BUCK1, + S5M8767_BUCK2, + S5M8767_BUCK3, + S5M8767_BUCK4, + S5M8767_BUCK5, + S5M8767_BUCK6, + S5M8767_BUCK7, + S5M8767_BUCK8, + S5M8767_BUCK9, + S5M8767_AP_EN32KHZ, + S5M8767_CP_EN32KHZ, + + S5M8767_REG_MAX, +}; + +#define S5M8767_ENCTRL_SHIFT 6 + +/* S5M8763 regulator ids */ +enum s5m8763_regulators { + S5M8763_LDO1, + S5M8763_LDO2, + S5M8763_LDO3, + S5M8763_LDO4, + S5M8763_LDO5, + S5M8763_LDO6, + S5M8763_LDO7, + S5M8763_LDO8, + S5M8763_LDO9, + S5M8763_LDO10, + S5M8763_LDO11, + S5M8763_LDO12, + S5M8763_LDO13, + S5M8763_LDO14, + S5M8763_LDO15, + S5M8763_LDO16, + S5M8763_BUCK1, + S5M8763_BUCK2, + S5M8763_BUCK3, + S5M8763_BUCK4, + S5M8763_AP_EN32KHZ, + S5M8763_CP_EN32KHZ, + S5M8763_ENCHGVI, + S5M8763_ESAFEUSB1, + S5M8763_ESAFEUSB2, +}; + +/** + * s5m87xx_regulator_data - regulator data + * @id: regulator id + * @initdata: regulator init data (contraints, supplies, ...) + */ +struct s5m_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +/* + * s5m_opmode_data - regulator operation mode data + * @id: regulator id + * @mode: regulator operation mode + */ +struct s5m_opmode_data { + int id; + int mode; +}; + +/* + * s5m regulator operation mode + * S5M_OPMODE_OFF Regulator always OFF + * S5M_OPMODE_ON Regulator always ON + * S5M_OPMODE_LOWPOWER Regulator is on in low-power mode + * S5M_OPMODE_SUSPEND Regulator is changed by PWREN pin + * If PWREN is high, regulator is on + * If PWREN is low, regulator is off + */ + +enum s5m_opmode { + S5M_OPMODE_OFF, + S5M_OPMODE_ON, + S5M_OPMODE_LOWPOWER, + S5M_OPMODE_SUSPEND, +}; + +#endif /* __LINUX_MFD_S5M_PMIC_H */ diff --git a/include/linux/mfd/samsung/s5m-rtc.h b/include/linux/mfd/samsung/s5m-rtc.h new file mode 100644 index 000000000000..6ce8da264cec --- /dev/null +++ b/include/linux/mfd/samsung/s5m-rtc.h @@ -0,0 +1,84 @@ +/* + * s5m-rtc.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S5M_RTC_H +#define __LINUX_MFD_S5M_RTC_H + +enum s5m87xx_rtc_reg { + S5M87XX_RTC_SEC, + S5M87XX_RTC_MIN, + S5M87XX_RTC_HOUR, + S5M87XX_RTC_WEEKDAY, + S5M87XX_RTC_DATE, + S5M87XX_RTC_MONTH, + S5M87XX_RTC_YEAR1, + S5M87XX_RTC_YEAR2, + S5M87XX_ALARM0_SEC, + S5M87XX_ALARM0_MIN, + S5M87XX_ALARM0_HOUR, + S5M87XX_ALARM0_WEEKDAY, + S5M87XX_ALARM0_DATE, + S5M87XX_ALARM0_MONTH, + S5M87XX_ALARM0_YEAR1, + S5M87XX_ALARM0_YEAR2, + S5M87XX_ALARM1_SEC, + S5M87XX_ALARM1_MIN, + S5M87XX_ALARM1_HOUR, + S5M87XX_ALARM1_WEEKDAY, + S5M87XX_ALARM1_DATE, + S5M87XX_ALARM1_MONTH, + S5M87XX_ALARM1_YEAR1, + S5M87XX_ALARM1_YEAR2, + S5M87XX_ALARM0_CONF, + S5M87XX_ALARM1_CONF, + S5M87XX_RTC_STATUS, + S5M87XX_WTSR_SMPL_CNTL, + S5M87XX_RTC_UDR_CON, +}; + +#define RTC_I2C_ADDR (0x0C >> 1) + +#define HOUR_12 (1 << 7) +#define HOUR_AMPM (1 << 6) +#define HOUR_PM (1 << 5) +#define ALARM0_STATUS (1 << 1) +#define ALARM1_STATUS (1 << 2) +#define UPDATE_AD (1 << 0) + +/* RTC Control Register */ +#define BCD_EN_SHIFT 0 +#define BCD_EN_MASK (1 << BCD_EN_SHIFT) +#define MODEL24_SHIFT 1 +#define MODEL24_MASK (1 << MODEL24_SHIFT) +/* RTC Update Register1 */ +#define RTC_UDR_SHIFT 0 +#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) +/* RTC Hour register */ +#define HOUR_PM_SHIFT 6 +#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT) +/* RTC Alarm Enable */ +#define ALARM_ENABLE_SHIFT 7 +#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT) + +enum { + RTC_SEC = 0, + RTC_MIN, + RTC_HOUR, + RTC_WEEKDAY, + RTC_DATE, + RTC_MONTH, + RTC_YEAR1, + RTC_YEAR2, +}; + +#endif /* __LINUX_MFD_S5M_RTC_H */ -- cgit v1.2.3 From 63063bfbffe997452e2ee4890f22dcde0119001e Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Wed, 11 Jul 2012 21:06:55 +0900 Subject: mfd: Modify samsung mfd driver for common api Previous naming rule of samsung pmic start with s5m prefix. But It is changed by s2m. To cover various samsung s2m and s5m series, This patch modify function and variable name for common usage. Signed-off-by: Sangbeom Kim Signed-off-by: Samuel Ortiz --- include/linux/mfd/samsung/s5m-core.h | 30 +++++++++++++++--------------- include/linux/mfd/samsung/s5m-pmic.h | 24 ++++++++++++------------ 2 files changed, 27 insertions(+), 27 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/s5m-core.h b/include/linux/mfd/samsung/s5m-core.h index 7332ff608c85..d3b4f634b5da 100644 --- a/include/linux/mfd/samsung/s5m-core.h +++ b/include/linux/mfd/samsung/s5m-core.h @@ -16,7 +16,7 @@ #define NUM_IRQ_REGS 4 -enum s5m_device_type { +enum sec_device_type { S5M8751X, S5M8763X, S5M8767X, @@ -292,20 +292,20 @@ enum s5m8763_irq { #define S5M8763_ENRAMP (1 << 4) /** - * struct s5m87xx_dev - s5m87xx master device for sub-drivers + * struct sec_pmic_dev - sec_pmic master device for sub-drivers * @dev: master device of the chip (can be used to access platform data) * @i2c: i2c client private data for regulator * @rtc: i2c client private data for rtc * @iolock: mutex for serializing io access * @irqlock: mutex for buslock - * @irq_base: base IRQ number for s5m87xx, required for IRQs + * @irq_base: base IRQ number for sec_pmic, required for IRQs * @irq: generic IRQ number for s5m87xx * @ono: power onoff IRQ number for s5m87xx * @irq_masks_cur: currently active value * @irq_masks_cache: cached hardware value * @type: indicate which s5m87xx "variant" is used */ -struct s5m87xx_dev { +struct sec_pmic_dev { struct device *dev; struct regmap *regmap; struct i2c_client *i2c; @@ -323,19 +323,19 @@ struct s5m87xx_dev { bool wakeup; }; -int s5m_irq_init(struct s5m87xx_dev *s5m87xx); -void s5m_irq_exit(struct s5m87xx_dev *s5m87xx); -int s5m_irq_resume(struct s5m87xx_dev *s5m87xx); +int sec_irq_init(struct sec_pmic_dev *sec_pmic); +void sec_irq_exit(struct sec_pmic_dev *sec_pmic); +int sec_irq_resume(struct sec_pmic_dev *sec_pmic); -extern int s5m_reg_read(struct s5m87xx_dev *s5m87xx, u8 reg, void *dest); -extern int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); -extern int s5m_reg_write(struct s5m87xx_dev *s5m87xx, u8 reg, u8 value); -extern int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); -extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask); +extern int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest); +extern int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf); +extern int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value); +extern int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf); +extern int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask); -struct s5m_platform_data { - struct s5m_regulator_data *regulators; - struct s5m_opmode_data *opmode; +struct sec_platform_data { + struct sec_regulator_data *regulators; + struct sec_opmode_data *opmode; int device_type; int num_regulators; diff --git a/include/linux/mfd/samsung/s5m-pmic.h b/include/linux/mfd/samsung/s5m-pmic.h index 7c719f20f58a..562febf73277 100644 --- a/include/linux/mfd/samsung/s5m-pmic.h +++ b/include/linux/mfd/samsung/s5m-pmic.h @@ -94,7 +94,7 @@ enum s5m8763_regulators { * @id: regulator id * @initdata: regulator init data (contraints, supplies, ...) */ -struct s5m_regulator_data { +struct sec_regulator_data { int id; struct regulator_init_data *initdata; }; @@ -104,26 +104,26 @@ struct s5m_regulator_data { * @id: regulator id * @mode: regulator operation mode */ -struct s5m_opmode_data { +struct sec_opmode_data { int id; int mode; }; /* - * s5m regulator operation mode - * S5M_OPMODE_OFF Regulator always OFF - * S5M_OPMODE_ON Regulator always ON - * S5M_OPMODE_LOWPOWER Regulator is on in low-power mode - * S5M_OPMODE_SUSPEND Regulator is changed by PWREN pin + * samsung regulator operation mode + * SEC_OPMODE_OFF Regulator always OFF + * SEC_OPMODE_ON Regulator always ON + * SEC_OPMODE_LOWPOWER Regulator is on in low-power mode + * SEC_OPMODE_SUSPEND Regulator is changed by PWREN pin * If PWREN is high, regulator is on * If PWREN is low, regulator is off */ -enum s5m_opmode { - S5M_OPMODE_OFF, - S5M_OPMODE_ON, - S5M_OPMODE_LOWPOWER, - S5M_OPMODE_SUSPEND, +enum sec_opmode { + SEC_OPMODE_OFF, + SEC_OPMODE_ON, + SEC_OPMODE_LOWPOWER, + SEC_OPMODE_SUSPEND, }; #endif /* __LINUX_MFD_S5M_PMIC_H */ -- cgit v1.2.3 From 54227bcf20fa0d8a0748c54747b9c39e8b16150d Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Wed, 11 Jul 2012 21:07:16 +0900 Subject: mfd: Modify samsung mfd header As Prefix of Samsung pmic changed from s5m to s2m, To make common mfd driver for s2m and s5m series, This patch rename header of Samsung mfd and modify mfd driver. Signed-off-by: Sangbeom Kim Signed-off-by: Samuel Ortiz --- include/linux/mfd/samsung/core.h | 147 ++++++++++++++ include/linux/mfd/samsung/irq.h | 110 +++++++++++ include/linux/mfd/samsung/rtc.h | 83 ++++++++ include/linux/mfd/samsung/s5m-core.h | 374 ----------------------------------- include/linux/mfd/samsung/s5m-pmic.h | 129 ------------ include/linux/mfd/samsung/s5m-rtc.h | 84 -------- include/linux/mfd/samsung/s5m8763.h | 96 +++++++++ include/linux/mfd/samsung/s5m8767.h | 188 ++++++++++++++++++ 8 files changed, 624 insertions(+), 587 deletions(-) create mode 100644 include/linux/mfd/samsung/core.h create mode 100644 include/linux/mfd/samsung/irq.h create mode 100644 include/linux/mfd/samsung/rtc.h delete mode 100644 include/linux/mfd/samsung/s5m-core.h delete mode 100644 include/linux/mfd/samsung/s5m-pmic.h delete mode 100644 include/linux/mfd/samsung/s5m-rtc.h create mode 100644 include/linux/mfd/samsung/s5m8763.h create mode 100644 include/linux/mfd/samsung/s5m8767.h (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h new file mode 100644 index 000000000000..3f5bcb2d0f18 --- /dev/null +++ b/include/linux/mfd/samsung/core.h @@ -0,0 +1,147 @@ +/* + * core.h + * + * copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_SEC_CORE_H +#define __LINUX_MFD_SEC_CORE_H + +#define NUM_IRQ_REGS 4 + +enum sec_device_type { + S5M8751X, + S5M8763X, + S5M8767X, +}; + +/** + * struct sec_pmic_dev - s5m87xx master device for sub-drivers + * @dev: master device of the chip (can be used to access platform data) + * @i2c: i2c client private data for regulator + * @rtc: i2c client private data for rtc + * @iolock: mutex for serializing io access + * @irqlock: mutex for buslock + * @irq_base: base IRQ number for sec-pmic, required for IRQs + * @irq: generic IRQ number for s5m87xx + * @ono: power onoff IRQ number for s5m87xx + * @irq_masks_cur: currently active value + * @irq_masks_cache: cached hardware value + * @type: indicate which s5m87xx "variant" is used + */ +struct sec_pmic_dev { + struct device *dev; + struct regmap *regmap; + struct i2c_client *i2c; + struct i2c_client *rtc; + struct mutex iolock; + struct mutex irqlock; + + int device_type; + int irq_base; + int irq; + int ono; + u8 irq_masks_cur[NUM_IRQ_REGS]; + u8 irq_masks_cache[NUM_IRQ_REGS]; + int type; + bool wakeup; +}; + +int sec_irq_init(struct sec_pmic_dev *sec_pmic); +void sec_irq_exit(struct sec_pmic_dev *sec_pmic); +int sec_irq_resume(struct sec_pmic_dev *sec_pmic); + +extern int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest); +extern int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf); +extern int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value); +extern int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf); +extern int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask); + +struct sec_platform_data { + struct sec_regulator_data *regulators; + struct sec_opmode_data *opmode; + int device_type; + int num_regulators; + + int irq_base; + int (*cfg_pmic_irq)(void); + + int ono; + bool wakeup; + bool buck_voltage_lock; + + int buck_gpios[3]; + int buck_ds[3]; + int buck2_voltage[8]; + bool buck2_gpiodvs; + int buck3_voltage[8]; + bool buck3_gpiodvs; + int buck4_voltage[8]; + bool buck4_gpiodvs; + + int buck_set1; + int buck_set2; + int buck_set3; + int buck2_enable; + int buck3_enable; + int buck4_enable; + int buck_default_idx; + int buck2_default_idx; + int buck3_default_idx; + int buck4_default_idx; + + int buck_ramp_delay; + bool buck2_ramp_enable; + bool buck3_ramp_enable; + bool buck4_ramp_enable; + + int buck2_init; + int buck3_init; + int buck4_init; +}; + +/** + * sec_regulator_data - regulator data + * @id: regulator id + * @initdata: regulator init data (contraints, supplies, ...) + */ +struct sec_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +/* + * sec_opmode_data - regulator operation mode data + * @id: regulator id + * @mode: regulator operation mode + */ +struct sec_opmode_data { + int id; + int mode; +}; + +/* + * samsung regulator operation mode + * SEC_OPMODE_OFF Regulator always OFF + * SEC_OPMODE_ON Regulator always ON + * SEC_OPMODE_LOWPOWER Regulator is on in low-power mode + * SEC_OPMODE_SUSPEND Regulator is changed by PWREN pin + * If PWREN is high, regulator is on + * If PWREN is low, regulator is off + */ + +enum sec_opmode { + SEC_OPMODE_OFF, + SEC_OPMODE_ON, + SEC_OPMODE_LOWPOWER, + SEC_OPMODE_SUSPEND, +}; + +#endif /* __LINUX_MFD_SEC_CORE_H */ diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h new file mode 100644 index 000000000000..7f7a6248f707 --- /dev/null +++ b/include/linux/mfd/samsung/irq.h @@ -0,0 +1,110 @@ +/* irq.h + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_SEC_IRQ_H +#define __LINUX_MFD_SEC_IRQ_H + +enum s5m8767_irq { + S5M8767_IRQ_PWRR, + S5M8767_IRQ_PWRF, + S5M8767_IRQ_PWR1S, + S5M8767_IRQ_JIGR, + S5M8767_IRQ_JIGF, + S5M8767_IRQ_LOWBAT2, + S5M8767_IRQ_LOWBAT1, + + S5M8767_IRQ_MRB, + S5M8767_IRQ_DVSOK2, + S5M8767_IRQ_DVSOK3, + S5M8767_IRQ_DVSOK4, + + S5M8767_IRQ_RTC60S, + S5M8767_IRQ_RTCA1, + S5M8767_IRQ_RTCA2, + S5M8767_IRQ_SMPL, + S5M8767_IRQ_RTC1S, + S5M8767_IRQ_WTSR, + + S5M8767_IRQ_NR, +}; + +#define S5M8767_IRQ_PWRR_MASK (1 << 0) +#define S5M8767_IRQ_PWRF_MASK (1 << 1) +#define S5M8767_IRQ_PWR1S_MASK (1 << 3) +#define S5M8767_IRQ_JIGR_MASK (1 << 4) +#define S5M8767_IRQ_JIGF_MASK (1 << 5) +#define S5M8767_IRQ_LOWBAT2_MASK (1 << 6) +#define S5M8767_IRQ_LOWBAT1_MASK (1 << 7) + +#define S5M8767_IRQ_MRB_MASK (1 << 2) +#define S5M8767_IRQ_DVSOK2_MASK (1 << 3) +#define S5M8767_IRQ_DVSOK3_MASK (1 << 4) +#define S5M8767_IRQ_DVSOK4_MASK (1 << 5) + +#define S5M8767_IRQ_RTC60S_MASK (1 << 0) +#define S5M8767_IRQ_RTCA1_MASK (1 << 1) +#define S5M8767_IRQ_RTCA2_MASK (1 << 2) +#define S5M8767_IRQ_SMPL_MASK (1 << 3) +#define S5M8767_IRQ_RTC1S_MASK (1 << 4) +#define S5M8767_IRQ_WTSR_MASK (1 << 5) + +enum s5m8763_irq { + S5M8763_IRQ_DCINF, + S5M8763_IRQ_DCINR, + S5M8763_IRQ_JIGF, + S5M8763_IRQ_JIGR, + S5M8763_IRQ_PWRONF, + S5M8763_IRQ_PWRONR, + + S5M8763_IRQ_WTSREVNT, + S5M8763_IRQ_SMPLEVNT, + S5M8763_IRQ_ALARM1, + S5M8763_IRQ_ALARM0, + + S5M8763_IRQ_ONKEY1S, + S5M8763_IRQ_TOPOFFR, + S5M8763_IRQ_DCINOVPR, + S5M8763_IRQ_CHGRSTF, + S5M8763_IRQ_DONER, + S5M8763_IRQ_CHGFAULT, + + S5M8763_IRQ_LOBAT1, + S5M8763_IRQ_LOBAT2, + + S5M8763_IRQ_NR, +}; + +#define S5M8763_IRQ_DCINF_MASK (1 << 2) +#define S5M8763_IRQ_DCINR_MASK (1 << 3) +#define S5M8763_IRQ_JIGF_MASK (1 << 4) +#define S5M8763_IRQ_JIGR_MASK (1 << 5) +#define S5M8763_IRQ_PWRONF_MASK (1 << 6) +#define S5M8763_IRQ_PWRONR_MASK (1 << 7) + +#define S5M8763_IRQ_WTSREVNT_MASK (1 << 0) +#define S5M8763_IRQ_SMPLEVNT_MASK (1 << 1) +#define S5M8763_IRQ_ALARM1_MASK (1 << 2) +#define S5M8763_IRQ_ALARM0_MASK (1 << 3) + +#define S5M8763_IRQ_ONKEY1S_MASK (1 << 0) +#define S5M8763_IRQ_TOPOFFR_MASK (1 << 2) +#define S5M8763_IRQ_DCINOVPR_MASK (1 << 3) +#define S5M8763_IRQ_CHGRSTF_MASK (1 << 4) +#define S5M8763_IRQ_DONER_MASK (1 << 5) +#define S5M8763_IRQ_CHGFAULT_MASK (1 << 7) + +#define S5M8763_IRQ_LOBAT1_MASK (1 << 0) +#define S5M8763_IRQ_LOBAT2_MASK (1 << 1) + +#define S5M8763_ENRAMP (1 << 4) + +#endif /* __LINUX_MFD_SEC_IRQ_H */ diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h new file mode 100644 index 000000000000..71597e20cddb --- /dev/null +++ b/include/linux/mfd/samsung/rtc.h @@ -0,0 +1,83 @@ +/* rtc.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_SEC_RTC_H +#define __LINUX_MFD_SEC_RTC_H + +enum sec_rtc_reg { + SEC_RTC_SEC, + SEC_RTC_MIN, + SEC_RTC_HOUR, + SEC_RTC_WEEKDAY, + SEC_RTC_DATE, + SEC_RTC_MONTH, + SEC_RTC_YEAR1, + SEC_RTC_YEAR2, + SEC_ALARM0_SEC, + SEC_ALARM0_MIN, + SEC_ALARM0_HOUR, + SEC_ALARM0_WEEKDAY, + SEC_ALARM0_DATE, + SEC_ALARM0_MONTH, + SEC_ALARM0_YEAR1, + SEC_ALARM0_YEAR2, + SEC_ALARM1_SEC, + SEC_ALARM1_MIN, + SEC_ALARM1_HOUR, + SEC_ALARM1_WEEKDAY, + SEC_ALARM1_DATE, + SEC_ALARM1_MONTH, + SEC_ALARM1_YEAR1, + SEC_ALARM1_YEAR2, + SEC_ALARM0_CONF, + SEC_ALARM1_CONF, + SEC_RTC_STATUS, + SEC_WTSR_SMPL_CNTL, + SEC_RTC_UDR_CON, +}; + +#define RTC_I2C_ADDR (0x0C >> 1) + +#define HOUR_12 (1 << 7) +#define HOUR_AMPM (1 << 6) +#define HOUR_PM (1 << 5) +#define ALARM0_STATUS (1 << 1) +#define ALARM1_STATUS (1 << 2) +#define UPDATE_AD (1 << 0) + +/* RTC Control Register */ +#define BCD_EN_SHIFT 0 +#define BCD_EN_MASK (1 << BCD_EN_SHIFT) +#define MODEL24_SHIFT 1 +#define MODEL24_MASK (1 << MODEL24_SHIFT) +/* RTC Update Register1 */ +#define RTC_UDR_SHIFT 0 +#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) +/* RTC Hour register */ +#define HOUR_PM_SHIFT 6 +#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT) +/* RTC Alarm Enable */ +#define ALARM_ENABLE_SHIFT 7 +#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT) + +enum { + RTC_SEC = 0, + RTC_MIN, + RTC_HOUR, + RTC_WEEKDAY, + RTC_DATE, + RTC_MONTH, + RTC_YEAR1, + RTC_YEAR2, +}; + +#endif /* __LINUX_MFD_SEC_RTC_H */ diff --git a/include/linux/mfd/samsung/s5m-core.h b/include/linux/mfd/samsung/s5m-core.h deleted file mode 100644 index d3b4f634b5da..000000000000 --- a/include/linux/mfd/samsung/s5m-core.h +++ /dev/null @@ -1,374 +0,0 @@ -/* - * s5m-core.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MFD_S5M_CORE_H -#define __LINUX_MFD_S5M_CORE_H - -#define NUM_IRQ_REGS 4 - -enum sec_device_type { - S5M8751X, - S5M8763X, - S5M8767X, -}; - -/* S5M8767 registers */ -enum s5m8767_reg { - S5M8767_REG_ID, - S5M8767_REG_INT1, - S5M8767_REG_INT2, - S5M8767_REG_INT3, - S5M8767_REG_INT1M, - S5M8767_REG_INT2M, - S5M8767_REG_INT3M, - S5M8767_REG_STATUS1, - S5M8767_REG_STATUS2, - S5M8767_REG_STATUS3, - S5M8767_REG_CTRL1, - S5M8767_REG_CTRL2, - S5M8767_REG_LOWBAT1, - S5M8767_REG_LOWBAT2, - S5M8767_REG_BUCHG, - S5M8767_REG_DVSRAMP, - S5M8767_REG_DVSTIMER2 = 0x10, - S5M8767_REG_DVSTIMER3, - S5M8767_REG_DVSTIMER4, - S5M8767_REG_LDO1, - S5M8767_REG_LDO2, - S5M8767_REG_LDO3, - S5M8767_REG_LDO4, - S5M8767_REG_LDO5, - S5M8767_REG_LDO6, - S5M8767_REG_LDO7, - S5M8767_REG_LDO8, - S5M8767_REG_LDO9, - S5M8767_REG_LDO10, - S5M8767_REG_LDO11, - S5M8767_REG_LDO12, - S5M8767_REG_LDO13, - S5M8767_REG_LDO14 = 0x20, - S5M8767_REG_LDO15, - S5M8767_REG_LDO16, - S5M8767_REG_LDO17, - S5M8767_REG_LDO18, - S5M8767_REG_LDO19, - S5M8767_REG_LDO20, - S5M8767_REG_LDO21, - S5M8767_REG_LDO22, - S5M8767_REG_LDO23, - S5M8767_REG_LDO24, - S5M8767_REG_LDO25, - S5M8767_REG_LDO26, - S5M8767_REG_LDO27, - S5M8767_REG_LDO28, - S5M8767_REG_UVLO = 0x31, - S5M8767_REG_BUCK1CTRL1, - S5M8767_REG_BUCK1CTRL2, - S5M8767_REG_BUCK2CTRL, - S5M8767_REG_BUCK2DVS1, - S5M8767_REG_BUCK2DVS2, - S5M8767_REG_BUCK2DVS3, - S5M8767_REG_BUCK2DVS4, - S5M8767_REG_BUCK2DVS5, - S5M8767_REG_BUCK2DVS6, - S5M8767_REG_BUCK2DVS7, - S5M8767_REG_BUCK2DVS8, - S5M8767_REG_BUCK3CTRL, - S5M8767_REG_BUCK3DVS1, - S5M8767_REG_BUCK3DVS2, - S5M8767_REG_BUCK3DVS3, - S5M8767_REG_BUCK3DVS4, - S5M8767_REG_BUCK3DVS5, - S5M8767_REG_BUCK3DVS6, - S5M8767_REG_BUCK3DVS7, - S5M8767_REG_BUCK3DVS8, - S5M8767_REG_BUCK4CTRL, - S5M8767_REG_BUCK4DVS1, - S5M8767_REG_BUCK4DVS2, - S5M8767_REG_BUCK4DVS3, - S5M8767_REG_BUCK4DVS4, - S5M8767_REG_BUCK4DVS5, - S5M8767_REG_BUCK4DVS6, - S5M8767_REG_BUCK4DVS7, - S5M8767_REG_BUCK4DVS8, - S5M8767_REG_BUCK5CTRL1, - S5M8767_REG_BUCK5CTRL2, - S5M8767_REG_BUCK5CTRL3, - S5M8767_REG_BUCK5CTRL4, - S5M8767_REG_BUCK5CTRL5, - S5M8767_REG_BUCK6CTRL1, - S5M8767_REG_BUCK6CTRL2, - S5M8767_REG_BUCK7CTRL1, - S5M8767_REG_BUCK7CTRL2, - S5M8767_REG_BUCK8CTRL1, - S5M8767_REG_BUCK8CTRL2, - S5M8767_REG_BUCK9CTRL1, - S5M8767_REG_BUCK9CTRL2, - S5M8767_REG_LDO1CTRL, - S5M8767_REG_LDO2_1CTRL, - S5M8767_REG_LDO2_2CTRL, - S5M8767_REG_LDO2_3CTRL, - S5M8767_REG_LDO2_4CTRL, - S5M8767_REG_LDO3CTRL, - S5M8767_REG_LDO4CTRL, - S5M8767_REG_LDO5CTRL, - S5M8767_REG_LDO6CTRL, - S5M8767_REG_LDO7CTRL, - S5M8767_REG_LDO8CTRL, - S5M8767_REG_LDO9CTRL, - S5M8767_REG_LDO10CTRL, - S5M8767_REG_LDO11CTRL, - S5M8767_REG_LDO12CTRL, - S5M8767_REG_LDO13CTRL, - S5M8767_REG_LDO14CTRL, - S5M8767_REG_LDO15CTRL, - S5M8767_REG_LDO16CTRL, - S5M8767_REG_LDO17CTRL, - S5M8767_REG_LDO18CTRL, - S5M8767_REG_LDO19CTRL, - S5M8767_REG_LDO20CTRL, - S5M8767_REG_LDO21CTRL, - S5M8767_REG_LDO22CTRL, - S5M8767_REG_LDO23CTRL, - S5M8767_REG_LDO24CTRL, - S5M8767_REG_LDO25CTRL, - S5M8767_REG_LDO26CTRL, - S5M8767_REG_LDO27CTRL, - S5M8767_REG_LDO28CTRL, -}; - -/* S5M8763 registers */ -enum s5m8763_reg { - S5M8763_REG_IRQ1, - S5M8763_REG_IRQ2, - S5M8763_REG_IRQ3, - S5M8763_REG_IRQ4, - S5M8763_REG_IRQM1, - S5M8763_REG_IRQM2, - S5M8763_REG_IRQM3, - S5M8763_REG_IRQM4, - S5M8763_REG_STATUS1, - S5M8763_REG_STATUS2, - S5M8763_REG_STATUSM1, - S5M8763_REG_STATUSM2, - S5M8763_REG_CHGR1, - S5M8763_REG_CHGR2, - S5M8763_REG_LDO_ACTIVE_DISCHARGE1, - S5M8763_REG_LDO_ACTIVE_DISCHARGE2, - S5M8763_REG_BUCK_ACTIVE_DISCHARGE3, - S5M8763_REG_ONOFF1, - S5M8763_REG_ONOFF2, - S5M8763_REG_ONOFF3, - S5M8763_REG_ONOFF4, - S5M8763_REG_BUCK1_VOLTAGE1, - S5M8763_REG_BUCK1_VOLTAGE2, - S5M8763_REG_BUCK1_VOLTAGE3, - S5M8763_REG_BUCK1_VOLTAGE4, - S5M8763_REG_BUCK2_VOLTAGE1, - S5M8763_REG_BUCK2_VOLTAGE2, - S5M8763_REG_BUCK3, - S5M8763_REG_BUCK4, - S5M8763_REG_LDO1_LDO2, - S5M8763_REG_LDO3, - S5M8763_REG_LDO4, - S5M8763_REG_LDO5, - S5M8763_REG_LDO6, - S5M8763_REG_LDO7, - S5M8763_REG_LDO7_LDO8, - S5M8763_REG_LDO9_LDO10, - S5M8763_REG_LDO11, - S5M8763_REG_LDO12, - S5M8763_REG_LDO13, - S5M8763_REG_LDO14, - S5M8763_REG_LDO15, - S5M8763_REG_LDO16, - S5M8763_REG_BKCHR, - S5M8763_REG_LBCNFG1, - S5M8763_REG_LBCNFG2, -}; - -enum s5m8767_irq { - S5M8767_IRQ_PWRR, - S5M8767_IRQ_PWRF, - S5M8767_IRQ_PWR1S, - S5M8767_IRQ_JIGR, - S5M8767_IRQ_JIGF, - S5M8767_IRQ_LOWBAT2, - S5M8767_IRQ_LOWBAT1, - - S5M8767_IRQ_MRB, - S5M8767_IRQ_DVSOK2, - S5M8767_IRQ_DVSOK3, - S5M8767_IRQ_DVSOK4, - - S5M8767_IRQ_RTC60S, - S5M8767_IRQ_RTCA1, - S5M8767_IRQ_RTCA2, - S5M8767_IRQ_SMPL, - S5M8767_IRQ_RTC1S, - S5M8767_IRQ_WTSR, - - S5M8767_IRQ_NR, -}; - -#define S5M8767_IRQ_PWRR_MASK (1 << 0) -#define S5M8767_IRQ_PWRF_MASK (1 << 1) -#define S5M8767_IRQ_PWR1S_MASK (1 << 3) -#define S5M8767_IRQ_JIGR_MASK (1 << 4) -#define S5M8767_IRQ_JIGF_MASK (1 << 5) -#define S5M8767_IRQ_LOWBAT2_MASK (1 << 6) -#define S5M8767_IRQ_LOWBAT1_MASK (1 << 7) - -#define S5M8767_IRQ_MRB_MASK (1 << 2) -#define S5M8767_IRQ_DVSOK2_MASK (1 << 3) -#define S5M8767_IRQ_DVSOK3_MASK (1 << 4) -#define S5M8767_IRQ_DVSOK4_MASK (1 << 5) - -#define S5M8767_IRQ_RTC60S_MASK (1 << 0) -#define S5M8767_IRQ_RTCA1_MASK (1 << 1) -#define S5M8767_IRQ_RTCA2_MASK (1 << 2) -#define S5M8767_IRQ_SMPL_MASK (1 << 3) -#define S5M8767_IRQ_RTC1S_MASK (1 << 4) -#define S5M8767_IRQ_WTSR_MASK (1 << 5) - -enum s5m8763_irq { - S5M8763_IRQ_DCINF, - S5M8763_IRQ_DCINR, - S5M8763_IRQ_JIGF, - S5M8763_IRQ_JIGR, - S5M8763_IRQ_PWRONF, - S5M8763_IRQ_PWRONR, - - S5M8763_IRQ_WTSREVNT, - S5M8763_IRQ_SMPLEVNT, - S5M8763_IRQ_ALARM1, - S5M8763_IRQ_ALARM0, - - S5M8763_IRQ_ONKEY1S, - S5M8763_IRQ_TOPOFFR, - S5M8763_IRQ_DCINOVPR, - S5M8763_IRQ_CHGRSTF, - S5M8763_IRQ_DONER, - S5M8763_IRQ_CHGFAULT, - - S5M8763_IRQ_LOBAT1, - S5M8763_IRQ_LOBAT2, - - S5M8763_IRQ_NR, -}; - -#define S5M8763_IRQ_DCINF_MASK (1 << 2) -#define S5M8763_IRQ_DCINR_MASK (1 << 3) -#define S5M8763_IRQ_JIGF_MASK (1 << 4) -#define S5M8763_IRQ_JIGR_MASK (1 << 5) -#define S5M8763_IRQ_PWRONF_MASK (1 << 6) -#define S5M8763_IRQ_PWRONR_MASK (1 << 7) - -#define S5M8763_IRQ_WTSREVNT_MASK (1 << 0) -#define S5M8763_IRQ_SMPLEVNT_MASK (1 << 1) -#define S5M8763_IRQ_ALARM1_MASK (1 << 2) -#define S5M8763_IRQ_ALARM0_MASK (1 << 3) - -#define S5M8763_IRQ_ONKEY1S_MASK (1 << 0) -#define S5M8763_IRQ_TOPOFFR_MASK (1 << 2) -#define S5M8763_IRQ_DCINOVPR_MASK (1 << 3) -#define S5M8763_IRQ_CHGRSTF_MASK (1 << 4) -#define S5M8763_IRQ_DONER_MASK (1 << 5) -#define S5M8763_IRQ_CHGFAULT_MASK (1 << 7) - -#define S5M8763_IRQ_LOBAT1_MASK (1 << 0) -#define S5M8763_IRQ_LOBAT2_MASK (1 << 1) - -#define S5M8763_ENRAMP (1 << 4) - -/** - * struct sec_pmic_dev - sec_pmic master device for sub-drivers - * @dev: master device of the chip (can be used to access platform data) - * @i2c: i2c client private data for regulator - * @rtc: i2c client private data for rtc - * @iolock: mutex for serializing io access - * @irqlock: mutex for buslock - * @irq_base: base IRQ number for sec_pmic, required for IRQs - * @irq: generic IRQ number for s5m87xx - * @ono: power onoff IRQ number for s5m87xx - * @irq_masks_cur: currently active value - * @irq_masks_cache: cached hardware value - * @type: indicate which s5m87xx "variant" is used - */ -struct sec_pmic_dev { - struct device *dev; - struct regmap *regmap; - struct i2c_client *i2c; - struct i2c_client *rtc; - struct mutex iolock; - struct mutex irqlock; - - int device_type; - int irq_base; - int irq; - int ono; - u8 irq_masks_cur[NUM_IRQ_REGS]; - u8 irq_masks_cache[NUM_IRQ_REGS]; - int type; - bool wakeup; -}; - -int sec_irq_init(struct sec_pmic_dev *sec_pmic); -void sec_irq_exit(struct sec_pmic_dev *sec_pmic); -int sec_irq_resume(struct sec_pmic_dev *sec_pmic); - -extern int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest); -extern int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf); -extern int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value); -extern int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf); -extern int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask); - -struct sec_platform_data { - struct sec_regulator_data *regulators; - struct sec_opmode_data *opmode; - int device_type; - int num_regulators; - - int irq_base; - int (*cfg_pmic_irq)(void); - - int ono; - bool wakeup; - bool buck_voltage_lock; - - int buck_gpios[3]; - int buck2_voltage[8]; - bool buck2_gpiodvs; - int buck3_voltage[8]; - bool buck3_gpiodvs; - int buck4_voltage[8]; - bool buck4_gpiodvs; - - int buck_set1; - int buck_set2; - int buck_set3; - int buck2_enable; - int buck3_enable; - int buck4_enable; - int buck_default_idx; - int buck2_default_idx; - int buck3_default_idx; - int buck4_default_idx; - - int buck_ramp_delay; - bool buck2_ramp_enable; - bool buck3_ramp_enable; - bool buck4_ramp_enable; -}; - -#endif /* __LINUX_MFD_S5M_CORE_H */ diff --git a/include/linux/mfd/samsung/s5m-pmic.h b/include/linux/mfd/samsung/s5m-pmic.h deleted file mode 100644 index 562febf73277..000000000000 --- a/include/linux/mfd/samsung/s5m-pmic.h +++ /dev/null @@ -1,129 +0,0 @@ -/* s5m87xx.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __LINUX_MFD_S5M_PMIC_H -#define __LINUX_MFD_S5M_PMIC_H - -#include - -/* S5M8767 regulator ids */ -enum s5m8767_regulators { - S5M8767_LDO1, - S5M8767_LDO2, - S5M8767_LDO3, - S5M8767_LDO4, - S5M8767_LDO5, - S5M8767_LDO6, - S5M8767_LDO7, - S5M8767_LDO8, - S5M8767_LDO9, - S5M8767_LDO10, - S5M8767_LDO11, - S5M8767_LDO12, - S5M8767_LDO13, - S5M8767_LDO14, - S5M8767_LDO15, - S5M8767_LDO16, - S5M8767_LDO17, - S5M8767_LDO18, - S5M8767_LDO19, - S5M8767_LDO20, - S5M8767_LDO21, - S5M8767_LDO22, - S5M8767_LDO23, - S5M8767_LDO24, - S5M8767_LDO25, - S5M8767_LDO26, - S5M8767_LDO27, - S5M8767_LDO28, - S5M8767_BUCK1, - S5M8767_BUCK2, - S5M8767_BUCK3, - S5M8767_BUCK4, - S5M8767_BUCK5, - S5M8767_BUCK6, - S5M8767_BUCK7, - S5M8767_BUCK8, - S5M8767_BUCK9, - S5M8767_AP_EN32KHZ, - S5M8767_CP_EN32KHZ, - - S5M8767_REG_MAX, -}; - -#define S5M8767_ENCTRL_SHIFT 6 - -/* S5M8763 regulator ids */ -enum s5m8763_regulators { - S5M8763_LDO1, - S5M8763_LDO2, - S5M8763_LDO3, - S5M8763_LDO4, - S5M8763_LDO5, - S5M8763_LDO6, - S5M8763_LDO7, - S5M8763_LDO8, - S5M8763_LDO9, - S5M8763_LDO10, - S5M8763_LDO11, - S5M8763_LDO12, - S5M8763_LDO13, - S5M8763_LDO14, - S5M8763_LDO15, - S5M8763_LDO16, - S5M8763_BUCK1, - S5M8763_BUCK2, - S5M8763_BUCK3, - S5M8763_BUCK4, - S5M8763_AP_EN32KHZ, - S5M8763_CP_EN32KHZ, - S5M8763_ENCHGVI, - S5M8763_ESAFEUSB1, - S5M8763_ESAFEUSB2, -}; - -/** - * s5m87xx_regulator_data - regulator data - * @id: regulator id - * @initdata: regulator init data (contraints, supplies, ...) - */ -struct sec_regulator_data { - int id; - struct regulator_init_data *initdata; -}; - -/* - * s5m_opmode_data - regulator operation mode data - * @id: regulator id - * @mode: regulator operation mode - */ -struct sec_opmode_data { - int id; - int mode; -}; - -/* - * samsung regulator operation mode - * SEC_OPMODE_OFF Regulator always OFF - * SEC_OPMODE_ON Regulator always ON - * SEC_OPMODE_LOWPOWER Regulator is on in low-power mode - * SEC_OPMODE_SUSPEND Regulator is changed by PWREN pin - * If PWREN is high, regulator is on - * If PWREN is low, regulator is off - */ - -enum sec_opmode { - SEC_OPMODE_OFF, - SEC_OPMODE_ON, - SEC_OPMODE_LOWPOWER, - SEC_OPMODE_SUSPEND, -}; - -#endif /* __LINUX_MFD_S5M_PMIC_H */ diff --git a/include/linux/mfd/samsung/s5m-rtc.h b/include/linux/mfd/samsung/s5m-rtc.h deleted file mode 100644 index 6ce8da264cec..000000000000 --- a/include/linux/mfd/samsung/s5m-rtc.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * s5m-rtc.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MFD_S5M_RTC_H -#define __LINUX_MFD_S5M_RTC_H - -enum s5m87xx_rtc_reg { - S5M87XX_RTC_SEC, - S5M87XX_RTC_MIN, - S5M87XX_RTC_HOUR, - S5M87XX_RTC_WEEKDAY, - S5M87XX_RTC_DATE, - S5M87XX_RTC_MONTH, - S5M87XX_RTC_YEAR1, - S5M87XX_RTC_YEAR2, - S5M87XX_ALARM0_SEC, - S5M87XX_ALARM0_MIN, - S5M87XX_ALARM0_HOUR, - S5M87XX_ALARM0_WEEKDAY, - S5M87XX_ALARM0_DATE, - S5M87XX_ALARM0_MONTH, - S5M87XX_ALARM0_YEAR1, - S5M87XX_ALARM0_YEAR2, - S5M87XX_ALARM1_SEC, - S5M87XX_ALARM1_MIN, - S5M87XX_ALARM1_HOUR, - S5M87XX_ALARM1_WEEKDAY, - S5M87XX_ALARM1_DATE, - S5M87XX_ALARM1_MONTH, - S5M87XX_ALARM1_YEAR1, - S5M87XX_ALARM1_YEAR2, - S5M87XX_ALARM0_CONF, - S5M87XX_ALARM1_CONF, - S5M87XX_RTC_STATUS, - S5M87XX_WTSR_SMPL_CNTL, - S5M87XX_RTC_UDR_CON, -}; - -#define RTC_I2C_ADDR (0x0C >> 1) - -#define HOUR_12 (1 << 7) -#define HOUR_AMPM (1 << 6) -#define HOUR_PM (1 << 5) -#define ALARM0_STATUS (1 << 1) -#define ALARM1_STATUS (1 << 2) -#define UPDATE_AD (1 << 0) - -/* RTC Control Register */ -#define BCD_EN_SHIFT 0 -#define BCD_EN_MASK (1 << BCD_EN_SHIFT) -#define MODEL24_SHIFT 1 -#define MODEL24_MASK (1 << MODEL24_SHIFT) -/* RTC Update Register1 */ -#define RTC_UDR_SHIFT 0 -#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) -/* RTC Hour register */ -#define HOUR_PM_SHIFT 6 -#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT) -/* RTC Alarm Enable */ -#define ALARM_ENABLE_SHIFT 7 -#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT) - -enum { - RTC_SEC = 0, - RTC_MIN, - RTC_HOUR, - RTC_WEEKDAY, - RTC_DATE, - RTC_MONTH, - RTC_YEAR1, - RTC_YEAR2, -}; - -#endif /* __LINUX_MFD_S5M_RTC_H */ diff --git a/include/linux/mfd/samsung/s5m8763.h b/include/linux/mfd/samsung/s5m8763.h new file mode 100644 index 000000000000..e025418e5589 --- /dev/null +++ b/include/linux/mfd/samsung/s5m8763.h @@ -0,0 +1,96 @@ +/* s5m8763.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S5M8763_H +#define __LINUX_MFD_S5M8763_H + +/* S5M8763 registers */ +enum s5m8763_reg { + S5M8763_REG_IRQ1, + S5M8763_REG_IRQ2, + S5M8763_REG_IRQ3, + S5M8763_REG_IRQ4, + S5M8763_REG_IRQM1, + S5M8763_REG_IRQM2, + S5M8763_REG_IRQM3, + S5M8763_REG_IRQM4, + S5M8763_REG_STATUS1, + S5M8763_REG_STATUS2, + S5M8763_REG_STATUSM1, + S5M8763_REG_STATUSM2, + S5M8763_REG_CHGR1, + S5M8763_REG_CHGR2, + S5M8763_REG_LDO_ACTIVE_DISCHARGE1, + S5M8763_REG_LDO_ACTIVE_DISCHARGE2, + S5M8763_REG_BUCK_ACTIVE_DISCHARGE3, + S5M8763_REG_ONOFF1, + S5M8763_REG_ONOFF2, + S5M8763_REG_ONOFF3, + S5M8763_REG_ONOFF4, + S5M8763_REG_BUCK1_VOLTAGE1, + S5M8763_REG_BUCK1_VOLTAGE2, + S5M8763_REG_BUCK1_VOLTAGE3, + S5M8763_REG_BUCK1_VOLTAGE4, + S5M8763_REG_BUCK2_VOLTAGE1, + S5M8763_REG_BUCK2_VOLTAGE2, + S5M8763_REG_BUCK3, + S5M8763_REG_BUCK4, + S5M8763_REG_LDO1_LDO2, + S5M8763_REG_LDO3, + S5M8763_REG_LDO4, + S5M8763_REG_LDO5, + S5M8763_REG_LDO6, + S5M8763_REG_LDO7, + S5M8763_REG_LDO7_LDO8, + S5M8763_REG_LDO9_LDO10, + S5M8763_REG_LDO11, + S5M8763_REG_LDO12, + S5M8763_REG_LDO13, + S5M8763_REG_LDO14, + S5M8763_REG_LDO15, + S5M8763_REG_LDO16, + S5M8763_REG_BKCHR, + S5M8763_REG_LBCNFG1, + S5M8763_REG_LBCNFG2, +}; + +/* S5M8763 regulator ids */ +enum s5m8763_regulators { + S5M8763_LDO1, + S5M8763_LDO2, + S5M8763_LDO3, + S5M8763_LDO4, + S5M8763_LDO5, + S5M8763_LDO6, + S5M8763_LDO7, + S5M8763_LDO8, + S5M8763_LDO9, + S5M8763_LDO10, + S5M8763_LDO11, + S5M8763_LDO12, + S5M8763_LDO13, + S5M8763_LDO14, + S5M8763_LDO15, + S5M8763_LDO16, + S5M8763_BUCK1, + S5M8763_BUCK2, + S5M8763_BUCK3, + S5M8763_BUCK4, + S5M8763_AP_EN32KHZ, + S5M8763_CP_EN32KHZ, + S5M8763_ENCHGVI, + S5M8763_ESAFEUSB1, + S5M8763_ESAFEUSB2, +}; + +#define S5M8763_ENRAMP (1 << 4) +#endif /* __LINUX_MFD_S5M8763_H */ diff --git a/include/linux/mfd/samsung/s5m8767.h b/include/linux/mfd/samsung/s5m8767.h new file mode 100644 index 000000000000..306a95fc558c --- /dev/null +++ b/include/linux/mfd/samsung/s5m8767.h @@ -0,0 +1,188 @@ +/* s5m8767.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S5M8767_H +#define __LINUX_MFD_S5M8767_H + +/* S5M8767 registers */ +enum s5m8767_reg { + S5M8767_REG_ID, + S5M8767_REG_INT1, + S5M8767_REG_INT2, + S5M8767_REG_INT3, + S5M8767_REG_INT1M, + S5M8767_REG_INT2M, + S5M8767_REG_INT3M, + S5M8767_REG_STATUS1, + S5M8767_REG_STATUS2, + S5M8767_REG_STATUS3, + S5M8767_REG_CTRL1, + S5M8767_REG_CTRL2, + S5M8767_REG_LOWBAT1, + S5M8767_REG_LOWBAT2, + S5M8767_REG_BUCHG, + S5M8767_REG_DVSRAMP, + S5M8767_REG_DVSTIMER2 = 0x10, + S5M8767_REG_DVSTIMER3, + S5M8767_REG_DVSTIMER4, + S5M8767_REG_LDO1, + S5M8767_REG_LDO2, + S5M8767_REG_LDO3, + S5M8767_REG_LDO4, + S5M8767_REG_LDO5, + S5M8767_REG_LDO6, + S5M8767_REG_LDO7, + S5M8767_REG_LDO8, + S5M8767_REG_LDO9, + S5M8767_REG_LDO10, + S5M8767_REG_LDO11, + S5M8767_REG_LDO12, + S5M8767_REG_LDO13, + S5M8767_REG_LDO14 = 0x20, + S5M8767_REG_LDO15, + S5M8767_REG_LDO16, + S5M8767_REG_LDO17, + S5M8767_REG_LDO18, + S5M8767_REG_LDO19, + S5M8767_REG_LDO20, + S5M8767_REG_LDO21, + S5M8767_REG_LDO22, + S5M8767_REG_LDO23, + S5M8767_REG_LDO24, + S5M8767_REG_LDO25, + S5M8767_REG_LDO26, + S5M8767_REG_LDO27, + S5M8767_REG_LDO28, + S5M8767_REG_UVLO = 0x31, + S5M8767_REG_BUCK1CTRL1, + S5M8767_REG_BUCK1CTRL2, + S5M8767_REG_BUCK2CTRL, + S5M8767_REG_BUCK2DVS1, + S5M8767_REG_BUCK2DVS2, + S5M8767_REG_BUCK2DVS3, + S5M8767_REG_BUCK2DVS4, + S5M8767_REG_BUCK2DVS5, + S5M8767_REG_BUCK2DVS6, + S5M8767_REG_BUCK2DVS7, + S5M8767_REG_BUCK2DVS8, + S5M8767_REG_BUCK3CTRL, + S5M8767_REG_BUCK3DVS1, + S5M8767_REG_BUCK3DVS2, + S5M8767_REG_BUCK3DVS3, + S5M8767_REG_BUCK3DVS4, + S5M8767_REG_BUCK3DVS5, + S5M8767_REG_BUCK3DVS6, + S5M8767_REG_BUCK3DVS7, + S5M8767_REG_BUCK3DVS8, + S5M8767_REG_BUCK4CTRL, + S5M8767_REG_BUCK4DVS1, + S5M8767_REG_BUCK4DVS2, + S5M8767_REG_BUCK4DVS3, + S5M8767_REG_BUCK4DVS4, + S5M8767_REG_BUCK4DVS5, + S5M8767_REG_BUCK4DVS6, + S5M8767_REG_BUCK4DVS7, + S5M8767_REG_BUCK4DVS8, + S5M8767_REG_BUCK5CTRL1, + S5M8767_REG_BUCK5CTRL2, + S5M8767_REG_BUCK5CTRL3, + S5M8767_REG_BUCK5CTRL4, + S5M8767_REG_BUCK5CTRL5, + S5M8767_REG_BUCK6CTRL1, + S5M8767_REG_BUCK6CTRL2, + S5M8767_REG_BUCK7CTRL1, + S5M8767_REG_BUCK7CTRL2, + S5M8767_REG_BUCK8CTRL1, + S5M8767_REG_BUCK8CTRL2, + S5M8767_REG_BUCK9CTRL1, + S5M8767_REG_BUCK9CTRL2, + S5M8767_REG_LDO1CTRL, + S5M8767_REG_LDO2_1CTRL, + S5M8767_REG_LDO2_2CTRL, + S5M8767_REG_LDO2_3CTRL, + S5M8767_REG_LDO2_4CTRL, + S5M8767_REG_LDO3CTRL, + S5M8767_REG_LDO4CTRL, + S5M8767_REG_LDO5CTRL, + S5M8767_REG_LDO6CTRL, + S5M8767_REG_LDO7CTRL, + S5M8767_REG_LDO8CTRL, + S5M8767_REG_LDO9CTRL, + S5M8767_REG_LDO10CTRL, + S5M8767_REG_LDO11CTRL, + S5M8767_REG_LDO12CTRL, + S5M8767_REG_LDO13CTRL, + S5M8767_REG_LDO14CTRL, + S5M8767_REG_LDO15CTRL, + S5M8767_REG_LDO16CTRL, + S5M8767_REG_LDO17CTRL, + S5M8767_REG_LDO18CTRL, + S5M8767_REG_LDO19CTRL, + S5M8767_REG_LDO20CTRL, + S5M8767_REG_LDO21CTRL, + S5M8767_REG_LDO22CTRL, + S5M8767_REG_LDO23CTRL, + S5M8767_REG_LDO24CTRL, + S5M8767_REG_LDO25CTRL, + S5M8767_REG_LDO26CTRL, + S5M8767_REG_LDO27CTRL, + S5M8767_REG_LDO28CTRL, +}; + +/* S5M8767 regulator ids */ +enum s5m8767_regulators { + S5M8767_LDO1, + S5M8767_LDO2, + S5M8767_LDO3, + S5M8767_LDO4, + S5M8767_LDO5, + S5M8767_LDO6, + S5M8767_LDO7, + S5M8767_LDO8, + S5M8767_LDO9, + S5M8767_LDO10, + S5M8767_LDO11, + S5M8767_LDO12, + S5M8767_LDO13, + S5M8767_LDO14, + S5M8767_LDO15, + S5M8767_LDO16, + S5M8767_LDO17, + S5M8767_LDO18, + S5M8767_LDO19, + S5M8767_LDO20, + S5M8767_LDO21, + S5M8767_LDO22, + S5M8767_LDO23, + S5M8767_LDO24, + S5M8767_LDO25, + S5M8767_LDO26, + S5M8767_LDO27, + S5M8767_LDO28, + S5M8767_BUCK1, + S5M8767_BUCK2, + S5M8767_BUCK3, + S5M8767_BUCK4, + S5M8767_BUCK5, + S5M8767_BUCK6, + S5M8767_BUCK7, + S5M8767_BUCK8, + S5M8767_BUCK9, + S5M8767_AP_EN32KHZ, + S5M8767_CP_EN32KHZ, + + S5M8767_REG_MAX, +}; + +#define S5M8767_ENCTRL_SHIFT 6 + +#endif /* __LINUX_MFD_S5M8767_H */ -- cgit v1.2.3 From 9b6d1343068d87f06c8dabf6628a30ea38082eb0 Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Wed, 11 Jul 2012 21:07:55 +0900 Subject: mfd: Add samsung s2mps11 mfd support This patch add Samsung S2MPS11 mfd driver. The S2MPS11 can support regulators and RTC. Signed-off-by: Sangbeom Kim Signed-off-by: Samuel Ortiz --- include/linux/mfd/samsung/core.h | 10 ++ include/linux/mfd/samsung/s2mps11.h | 196 ++++++++++++++++++++++++++++++++++++ 2 files changed, 206 insertions(+) create mode 100644 include/linux/mfd/samsung/s2mps11.h (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 3f5bcb2d0f18..323e200bc82c 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -20,6 +20,7 @@ enum sec_device_type { S5M8751X, S5M8763X, S5M8767X, + S2MPS11X, }; /** @@ -98,9 +99,18 @@ struct sec_platform_data { int buck4_default_idx; int buck_ramp_delay; + + int buck2_ramp_delay; + int buck34_ramp_delay; + int buck5_ramp_delay; + int buck16_ramp_delay; + int buck7810_ramp_delay; + int buck9_ramp_delay; + bool buck2_ramp_enable; bool buck3_ramp_enable; bool buck4_ramp_enable; + bool buck6_ramp_enable; int buck2_init; int buck3_init; diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h new file mode 100644 index 000000000000..ad2252f239d7 --- /dev/null +++ b/include/linux/mfd/samsung/s2mps11.h @@ -0,0 +1,196 @@ +/* + * s2mps11.h + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S2MPS11_H +#define __LINUX_MFD_S2MPS11_H + +/* S2MPS11 registers */ +enum s2mps11_reg { + S2MPS11_REG_ID, + S2MPS11_REG_INT1, + S2MPS11_REG_INT2, + S2MPS11_REG_INT3, + S2MPS11_REG_INT1M, + S2MPS11_REG_INT2M, + S2MPS11_REG_INT3M, + S2MPS11_REG_ST1, + S2MPS11_REG_ST2, + S2MPS11_REG_OFFSRC, + S2MPS11_REG_PWRONSRC, + S2MPS11_REG_RTC_CTRL, + S2MPS11_REG_CTRL1, + S2MPS11_REG_ETC_TEST, + S2MPS11_REG_RSVD3, + S2MPS11_REG_BU_CHG, + S2MPS11_REG_RAMP, + S2MPS11_REG_RAMP_BUCK, + S2MPS11_REG_LDO1_8, + S2MPS11_REG_LDO9_16, + S2MPS11_REG_LDO17_24, + S2MPS11_REG_LDO25_32, + S2MPS11_REG_LDO33_38, + S2MPS11_REG_LDO1_8_1, + S2MPS11_REG_LDO9_16_1, + S2MPS11_REG_LDO17_24_1, + S2MPS11_REG_LDO25_32_1, + S2MPS11_REG_LDO33_38_1, + S2MPS11_REG_OTP_ADRL, + S2MPS11_REG_OTP_ADRH, + S2MPS11_REG_OTP_DATA, + S2MPS11_REG_MON1SEL, + S2MPS11_REG_MON2SEL, + S2MPS11_REG_LEE, + S2MPS11_REG_RSVD_NO, + S2MPS11_REG_UVLO, + S2MPS11_REG_LEE_NO, + S2MPS11_REG_B1CTRL1, + S2MPS11_REG_B1CTRL2, + S2MPS11_REG_B2CTRL1, + S2MPS11_REG_B2CTRL2, + S2MPS11_REG_B3CTRL1, + S2MPS11_REG_B3CTRL2, + S2MPS11_REG_B4CTRL1, + S2MPS11_REG_B4CTRL2, + S2MPS11_REG_B5CTRL1, + S2MPS11_REG_BUCK5_SW, + S2MPS11_REG_B5CTRL2, + S2MPS11_REG_B5CTRL3, + S2MPS11_REG_B5CTRL4, + S2MPS11_REG_B5CTRL5, + S2MPS11_REG_B6CTRL1, + S2MPS11_REG_B6CTRL2, + S2MPS11_REG_B7CTRL1, + S2MPS11_REG_B7CTRL2, + S2MPS11_REG_B8CTRL1, + S2MPS11_REG_B8CTRL2, + S2MPS11_REG_B9CTRL1, + S2MPS11_REG_B9CTRL2, + S2MPS11_REG_B10CTRL1, + S2MPS11_REG_B10CTRL2, + S2MPS11_REG_L1CTRL, + S2MPS11_REG_L2CTRL, + S2MPS11_REG_L3CTRL, + S2MPS11_REG_L4CTRL, + S2MPS11_REG_L5CTRL, + S2MPS11_REG_L6CTRL, + S2MPS11_REG_L7CTRL, + S2MPS11_REG_L8CTRL, + S2MPS11_REG_L9CTRL, + S2MPS11_REG_L10CTRL, + S2MPS11_REG_L11CTRL, + S2MPS11_REG_L12CTRL, + S2MPS11_REG_L13CTRL, + S2MPS11_REG_L14CTRL, + S2MPS11_REG_L15CTRL, + S2MPS11_REG_L16CTRL, + S2MPS11_REG_L17CTRL, + S2MPS11_REG_L18CTRL, + S2MPS11_REG_L19CTRL, + S2MPS11_REG_L20CTRL, + S2MPS11_REG_L21CTRL, + S2MPS11_REG_L22CTRL, + S2MPS11_REG_L23CTRL, + S2MPS11_REG_L24CTRL, + S2MPS11_REG_L25CTRL, + S2MPS11_REG_L26CTRL, + S2MPS11_REG_L27CTRL, + S2MPS11_REG_L28CTRL, + S2MPS11_REG_L29CTRL, + S2MPS11_REG_L30CTRL, + S2MPS11_REG_L31CTRL, + S2MPS11_REG_L32CTRL, + S2MPS11_REG_L33CTRL, + S2MPS11_REG_L34CTRL, + S2MPS11_REG_L35CTRL, + S2MPS11_REG_L36CTRL, + S2MPS11_REG_L37CTRL, + S2MPS11_REG_L38CTRL, +}; + +/* S2MPS11 regulator ids */ +enum s2mps11_regulators { + S2MPS11_LDO1, + S2MPS11_LDO2, + S2MPS11_LDO3, + S2MPS11_LDO4, + S2MPS11_LDO5, + S2MPS11_LDO6, + S2MPS11_LDO7, + S2MPS11_LDO8, + S2MPS11_LDO9, + S2MPS11_LDO10, + S2MPS11_LDO11, + S2MPS11_LDO12, + S2MPS11_LDO13, + S2MPS11_LDO14, + S2MPS11_LDO15, + S2MPS11_LDO16, + S2MPS11_LDO17, + S2MPS11_LDO18, + S2MPS11_LDO19, + S2MPS11_LDO20, + S2MPS11_LDO21, + S2MPS11_LDO22, + S2MPS11_LDO23, + S2MPS11_LDO24, + S2MPS11_LDO25, + S2MPS11_LDO26, + S2MPS11_LDO27, + S2MPS11_LDO28, + S2MPS11_LDO29, + S2MPS11_LDO30, + S2MPS11_LDO31, + S2MPS11_LDO32, + S2MPS11_LDO33, + S2MPS11_LDO34, + S2MPS11_LDO35, + S2MPS11_LDO36, + S2MPS11_LDO37, + S2MPS11_LDO38, + S2MPS11_BUCK1, + S2MPS11_BUCK2, + S2MPS11_BUCK3, + S2MPS11_BUCK4, + S2MPS11_BUCK5, + S2MPS11_BUCK6, + S2MPS11_BUCK7, + S2MPS11_BUCK8, + S2MPS11_BUCK9, + S2MPS11_BUCK10, + S2MPS11_AP_EN32KHZ, + S2MPS11_CP_EN32KHZ, + S2MPS11_BT_EN32KHZ, + + S2MPS11_REG_MAX, +}; + +#define S2MPS11_BUCK_MIN1 600000 +#define S2MPS11_BUCK_MIN2 750000 +#define S2MPS11_BUCK_MIN3 3000000 +#define S2MPS11_LDO_MIN 800000 +#define S2MPS11_BUCK_STEP1 6250 +#define S2MPS11_BUCK_STEP2 12500 +#define S2MPS11_BUCK_STEP3 25000 +#define S2MPS11_LDO_STEP1 50000 +#define S2MPS11_LDO_STEP2 25000 +#define S2MPS11_LDO_VSEL_MASK 0x3F +#define S2MPS11_BUCK_VSEL_MASK 0xFF +#define S2MPS11_ENABLE_MASK (0x03 << S2MPS11_ENABLE_SHIFT) +#define S2MPS11_ENABLE_SHIFT 0x06 +#define S2MPS11_LDO_N_VOLTAGES (S2MPS11_LDO_VSEL_MASK + 1) +#define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1) + +#define S2MPS11_PMIC_EN_SHIFT 6 +#define S2MPS11_REGULATOR_MAX (S2MPS11_REG_MAX - 3) + +#endif /* __LINUX_MFD_S2MPS11_H */ -- cgit v1.2.3 From 6445b84abf91549d8568fb5d9155447e6dba86cc Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Wed, 11 Jul 2012 21:08:11 +0900 Subject: mfd: Add s2mps11 irq driver This patch support irq handling driver for s2mps11. As this patch use regmap_irq, s5m8767 and s5m8763 are modified with regmap_irq. Signed-off-by: Sangbeom Kim Signed-off-by: Samuel Ortiz --- include/linux/mfd/samsung/core.h | 2 ++ include/linux/mfd/samsung/irq.h | 42 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 323e200bc82c..b50c38f8bc48 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -48,6 +48,8 @@ struct sec_pmic_dev { int device_type; int irq_base; int irq; + struct regmap_irq_chip_data *irq_data; + int ono; u8 irq_masks_cur[NUM_IRQ_REGS]; u8 irq_masks_cache[NUM_IRQ_REGS]; diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h index 7f7a6248f707..d43b4f9e7fb2 100644 --- a/include/linux/mfd/samsung/irq.h +++ b/include/linux/mfd/samsung/irq.h @@ -13,6 +13,48 @@ #ifndef __LINUX_MFD_SEC_IRQ_H #define __LINUX_MFD_SEC_IRQ_H +enum s2mps11_irq { + S2MPS11_IRQ_PWRONF, + S2MPS11_IRQ_PWRONR, + S2MPS11_IRQ_JIGONBF, + S2MPS11_IRQ_JIGONBR, + S2MPS11_IRQ_ACOKBF, + S2MPS11_IRQ_ACOKBR, + S2MPS11_IRQ_PWRON1S, + S2MPS11_IRQ_MRB, + + S2MPS11_IRQ_RTC60S, + S2MPS11_IRQ_RTCA1, + S2MPS11_IRQ_RTCA2, + S2MPS11_IRQ_SMPL, + S2MPS11_IRQ_RTC1S, + S2MPS11_IRQ_WTSR, + + S2MPS11_IRQ_INT120C, + S2MPS11_IRQ_INT140C, + + S2MPS11_IRQ_NR, +}; + +#define S2MPS11_IRQ_PWRONF_MASK (1 << 0) +#define S2MPS11_IRQ_PWRONR_MASK (1 << 1) +#define S2MPS11_IRQ_JIGONBF_MASK (1 << 2) +#define S2MPS11_IRQ_JIGONBR_MASK (1 << 3) +#define S2MPS11_IRQ_ACOKBF_MASK (1 << 4) +#define S2MPS11_IRQ_ACOKBR_MASK (1 << 5) +#define S2MPS11_IRQ_PWRON1S_MASK (1 << 6) +#define S2MPS11_IRQ_MRB_MASK (1 << 7) + +#define S2MPS11_IRQ_RTC60S_MASK (1 << 0) +#define S2MPS11_IRQ_RTCA1_MASK (1 << 1) +#define S2MPS11_IRQ_RTCA2_MASK (1 << 2) +#define S2MPS11_IRQ_SMPL_MASK (1 << 3) +#define S2MPS11_IRQ_RTC1S_MASK (1 << 4) +#define S2MPS11_IRQ_WTSR_MASK (1 << 5) + +#define S2MPS11_IRQ_INT120C_MASK (1 << 0) +#define S2MPS11_IRQ_INT140C_MASK (1 << 1) + enum s5m8767_irq { S5M8767_IRQ_PWRR, S5M8767_IRQ_PWRF, -- cgit v1.2.3 From e102befe7a254f7b827fecc19eba0c5af03d1bf3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 10 Jul 2012 12:37:58 +0100 Subject: mfd: Initial support for the WM5110 The WM5110 is a highly-integrated low-power audio system for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high-performance audio hub CODEC. The support is based on the Arizona core driver. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/arizona/core.h | 79 ++++++++++++++++++++++----------------- include/linux/mfd/arizona/pdata.h | 4 +- 2 files changed, 47 insertions(+), 36 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index 3ef32b4c1136..dd231ac0bb1f 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -22,6 +22,7 @@ enum arizona_type { WM5102 = 1, + WM5110 = 2, }; #define ARIZONA_IRQ_GP1 0 @@ -33,40 +34,49 @@ enum arizona_type { #define ARIZONA_IRQ_JD_FALL 6 #define ARIZONA_IRQ_JD_RISE 7 #define ARIZONA_IRQ_DSP1_RAM_RDY 8 -#define ARIZONA_IRQ_DSP_IRQ1 9 -#define ARIZONA_IRQ_DSP_IRQ2 10 -#define ARIZONA_IRQ_SPK_SHUTDOWN_WARN 11 -#define ARIZONA_IRQ_SPK_SHUTDOWN 12 -#define ARIZONA_IRQ_MICDET 13 -#define ARIZONA_IRQ_HPDET 14 -#define ARIZONA_IRQ_WSEQ_DONE 15 -#define ARIZONA_IRQ_DRC2_SIG_DET 16 -#define ARIZONA_IRQ_DRC1_SIG_DET 17 -#define ARIZONA_IRQ_ASRC2_LOCK 18 -#define ARIZONA_IRQ_ASRC1_LOCK 19 -#define ARIZONA_IRQ_UNDERCLOCKED 20 -#define ARIZONA_IRQ_OVERCLOCKED 21 -#define ARIZONA_IRQ_FLL2_LOCK 22 -#define ARIZONA_IRQ_FLL1_LOCK 23 -#define ARIZONA_IRQ_CLKGEN_ERR 24 -#define ARIZONA_IRQ_CLKGEN_ERR_ASYNC 25 -#define ARIZONA_IRQ_ASRC_CFG_ERR 26 -#define ARIZONA_IRQ_AIF3_ERR 27 -#define ARIZONA_IRQ_AIF2_ERR 28 -#define ARIZONA_IRQ_AIF1_ERR 29 -#define ARIZONA_IRQ_CTRLIF_ERR 30 -#define ARIZONA_IRQ_MIXER_DROPPED_SAMPLES 31 -#define ARIZONA_IRQ_ASYNC_CLK_ENA_LOW 32 -#define ARIZONA_IRQ_SYSCLK_ENA_LOW 33 -#define ARIZONA_IRQ_ISRC1_CFG_ERR 34 -#define ARIZONA_IRQ_ISRC2_CFG_ERR 35 -#define ARIZONA_IRQ_BOOT_DONE 36 -#define ARIZONA_IRQ_DCS_DAC_DONE 37 -#define ARIZONA_IRQ_DCS_HP_DONE 38 -#define ARIZONA_IRQ_FLL2_CLOCK_OK 39 -#define ARIZONA_IRQ_FLL1_CLOCK_OK 40 - -#define ARIZONA_NUM_IRQ 41 +#define ARIZONA_IRQ_DSP2_RAM_RDY 9 +#define ARIZONA_IRQ_DSP3_RAM_RDY 10 +#define ARIZONA_IRQ_DSP4_RAM_RDY 11 +#define ARIZONA_IRQ_DSP_IRQ1 12 +#define ARIZONA_IRQ_DSP_IRQ2 13 +#define ARIZONA_IRQ_DSP_IRQ3 14 +#define ARIZONA_IRQ_DSP_IRQ4 15 +#define ARIZONA_IRQ_DSP_IRQ5 16 +#define ARIZONA_IRQ_DSP_IRQ6 17 +#define ARIZONA_IRQ_DSP_IRQ7 18 +#define ARIZONA_IRQ_DSP_IRQ8 19 +#define ARIZONA_IRQ_SPK_SHUTDOWN_WARN 20 +#define ARIZONA_IRQ_SPK_SHUTDOWN 21 +#define ARIZONA_IRQ_MICDET 22 +#define ARIZONA_IRQ_HPDET 23 +#define ARIZONA_IRQ_WSEQ_DONE 24 +#define ARIZONA_IRQ_DRC2_SIG_DET 25 +#define ARIZONA_IRQ_DRC1_SIG_DET 26 +#define ARIZONA_IRQ_ASRC2_LOCK 27 +#define ARIZONA_IRQ_ASRC1_LOCK 28 +#define ARIZONA_IRQ_UNDERCLOCKED 29 +#define ARIZONA_IRQ_OVERCLOCKED 30 +#define ARIZONA_IRQ_FLL2_LOCK 31 +#define ARIZONA_IRQ_FLL1_LOCK 32 +#define ARIZONA_IRQ_CLKGEN_ERR 33 +#define ARIZONA_IRQ_CLKGEN_ERR_ASYNC 34 +#define ARIZONA_IRQ_ASRC_CFG_ERR 35 +#define ARIZONA_IRQ_AIF3_ERR 36 +#define ARIZONA_IRQ_AIF2_ERR 37 +#define ARIZONA_IRQ_AIF1_ERR 38 +#define ARIZONA_IRQ_CTRLIF_ERR 39 +#define ARIZONA_IRQ_MIXER_DROPPED_SAMPLES 40 +#define ARIZONA_IRQ_ASYNC_CLK_ENA_LOW 41 +#define ARIZONA_IRQ_SYSCLK_ENA_LOW 42 +#define ARIZONA_IRQ_ISRC1_CFG_ERR 43 +#define ARIZONA_IRQ_ISRC2_CFG_ERR 44 +#define ARIZONA_IRQ_BOOT_DONE 45 +#define ARIZONA_IRQ_DCS_DAC_DONE 46 +#define ARIZONA_IRQ_DCS_HP_DONE 47 +#define ARIZONA_IRQ_FLL2_CLOCK_OK 48 +#define ARIZONA_IRQ_FLL1_CLOCK_OK 49 + +#define ARIZONA_NUM_IRQ 50 struct arizona { struct regmap *regmap; @@ -99,5 +109,6 @@ void arizona_free_irq(struct arizona *arizona, int irq, void *data); int arizona_set_irq_wake(struct arizona *arizona, int irq, int on); int wm5102_patch(struct arizona *arizona); +int wm5110_patch(struct arizona *arizona); #endif diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 68ff91aa3888..7ab442905a57 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -49,7 +49,7 @@ #define ARIZONA_32KZ_MCLK2 2 #define ARIZONA_32KZ_NONE 3 -#define ARIZONA_MAX_INPUT 3 +#define ARIZONA_MAX_INPUT 4 #define ARIZONA_DMIC_MICVDD 0 #define ARIZONA_DMIC_MICBIAS1 1 @@ -60,7 +60,7 @@ #define ARIZONA_INMODE_SE 1 #define ARIZONA_INMODE_DMIC 2 -#define ARIZONA_MAX_OUTPUT 5 +#define ARIZONA_MAX_OUTPUT 6 #define ARIZONA_MAX_PDM_SPK 2 -- cgit v1.2.3 From 706c96b7208b6b4f070b7f5c104ea917c48043f5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 11 Jul 2012 10:01:10 +0800 Subject: mfd: Remove __devexit annotation for pm80x_deinit This fixes below section mismatch warning: LD drivers/mfd/built-in.o WARNING: drivers/mfd/built-in.o(.devinit.text+0x46c): Section mismatch in reference from the function pm800_probe() to the function .devexit.text:pm80x_deinit() The function __devinit pm800_probe() references a function __devexit pm80x_deinit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of pm80x_deinit() so it may be used outside an exit section. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm80x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 103f06d1892d..a0ca0dca1244 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -365,5 +365,5 @@ static inline int pm80x_dev_resume(struct device *dev) extern int pm80x_init(struct i2c_client *client, const struct i2c_device_id *id) __devinit; -extern int pm80x_deinit(struct i2c_client *client) __devexit; +extern int pm80x_deinit(struct i2c_client *client); #endif /* __LINUX_MFD_88PM80X_H */ -- cgit v1.2.3 From c600040f0d1fecbbe4582c00d99d8f5c4ffd0390 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 11 Jul 2012 10:06:34 +0800 Subject: mfd: Remove unneeded io_mutex from struct twl6040 Current code has been converted to use regmap APIs, the io_mutex is not needed. Thus remove the io_mutex. Signed-off-by: Axel Lin Acked-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- include/linux/mfd/twl6040.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 6659487c31e7..dcc0e12b8038 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -206,7 +206,6 @@ struct twl6040 { struct regmap *regmap; struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */ struct mutex mutex; - struct mutex io_mutex; struct mutex irq_mutex; struct mfd_cell cells[TWL6040_CELLS]; struct completion ready; -- cgit v1.2.3 From 6a1a1e34dc55f17e7bd260809207442dbb7a0296 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 11 Jul 2012 16:31:08 -0400 Subject: SUNRPC: Add rpcauth_list_flavors() The gss_mech_list_pseudoflavors() function provides a list of currently registered GSS pseudoflavors. This list does not include any non-GSS flavors that have been registered with the RPC client. nfs4_find_root_sec() currently adds these extra flavors by hand. Instead, nfs4_find_root_sec() should be looking at the set of flavors that have been explicitly registered via rpcauth_register(). And, other areas of code will soon need the same kind of list that contains all flavors the kernel currently knows about (see below). Rather than cloning the open-coded logic in nfs4_find_root_sec() to those new places, introduce a generic RPC function that generates a full list of registered auth flavors and pseudoflavors. A new rpc_authops method is added that lists a flavor's pseudoflavors, if it has any. I encountered an interesting module loader loop when I tried to get the RPC client to invoke gss_mech_list_pseudoflavors() by name. This patch is a pre-requisite for server trunking discovery, and a pre-requisite for fixing up the in-kernel mount client to do better automatic security flavor selection. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/auth.h | 2 ++ include/linux/sunrpc/gss_api.h | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h index 492a36d72829..f25ba922baaf 100644 --- a/include/linux/sunrpc/auth.h +++ b/include/linux/sunrpc/auth.h @@ -101,6 +101,7 @@ struct rpc_authops { struct rpc_cred * (*crcreate)(struct rpc_auth*, struct auth_cred *, int); int (*pipes_create)(struct rpc_auth *); void (*pipes_destroy)(struct rpc_auth *); + int (*list_pseudoflavors)(rpc_authflavor_t *, int); }; struct rpc_credops { @@ -135,6 +136,7 @@ int rpcauth_register(const struct rpc_authops *); int rpcauth_unregister(const struct rpc_authops *); struct rpc_auth * rpcauth_create(rpc_authflavor_t, struct rpc_clnt *); void rpcauth_release(struct rpc_auth *); +int rpcauth_list_flavors(rpc_authflavor_t *, int); struct rpc_cred * rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred *, int); void rpcauth_init_cred(struct rpc_cred *, const struct auth_cred *, struct rpc_auth *, const struct rpc_credops *); struct rpc_cred * rpcauth_lookupcred(struct rpc_auth *, int); diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h index 332da61cf8b7..a19e2547ae6a 100644 --- a/include/linux/sunrpc/gss_api.h +++ b/include/linux/sunrpc/gss_api.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ #include +#include #include /* The mechanism-independent gss-api context: */ @@ -127,7 +128,7 @@ struct gss_api_mech *gss_mech_get_by_name(const char *); struct gss_api_mech *gss_mech_get_by_pseudoflavor(u32); /* Fill in an array with a list of supported pseudoflavors */ -int gss_mech_list_pseudoflavors(u32 *); +int gss_mech_list_pseudoflavors(rpc_authflavor_t *, int); /* Just increments the mechanism's reference count and returns its input: */ struct gss_api_mech * gss_mech_get(struct gss_api_mech *); -- cgit v1.2.3 From de734831224e74fcaf8917386e33644c4243db95 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 11 Jul 2012 16:30:50 -0400 Subject: NFS: Treat NFS4ERR_CLID_INUSE as a fatal error For NFSv4 minor version 0, currently the cl_id_uniquifier allows the Linux client to generate a unique nfs_client_id4 string whenever a server replies with NFS4ERR_CLID_INUSE. This implementation seems to be based on a flawed reading of RFC 3530. NFS4ERR_CLID_INUSE actually means that the client has presented this nfs_client_id4 string with a different principal at some time in the past, and that lease is still in use on the server. For a Linux client this might be rather difficult to achieve: the authentication flavor is named right in the nfs_client_id4.id string. If we change flavors, we change strings automatically. So, practically speaking, NFS4ERR_CLID_INUSE means there is some other client using our string. There is not much that can be done to recover automatically. Let's make it a permanent error. Remove the recovery logic in nfs4_proc_setclientid(), and remove the cl_id_uniquifier field from the nfs_client data structure. And, remove the authentication flavor from the nfs_client_id4 string. Keeping the authentication flavor in the nfs_client_id4.id string means that we could have a separate lease for each authentication flavor used by mounts on the client. But we want just one lease for all the mounts on this client. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/nfs_fs_sb.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index f58325a1d8fb..65327652c61a 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -69,10 +69,9 @@ struct nfs_client { struct idmap * cl_idmap; /* Our own IP address, as a null-terminated string. - * This is used to generate the clientid, and the callback address. + * This is used to generate the mv0 callback address. */ char cl_ipaddr[48]; - unsigned char cl_id_uniquifier; u32 cl_cb_ident; /* v4.0 callback identifier */ const struct nfs4_minor_version_ops *cl_mvops; -- cgit v1.2.3 From e1bc9e50752c291a9ea602866331cd9e02049745 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 7 Jul 2012 23:05:28 -0400 Subject: usb: storage: add support for write cache quirk Add support for write cache quirk on usb hdd. scsi driver will be set to wce by detecting write cache quirk in quirk list when plugging usb hdd. Signed-off-by: Namjae Jeon Signed-off-by: Pankaj Kumar Signed-off-by: Amit Sahrawat Acked-by: Alan Stern Cc: James Bottomley Signed-off-by: Greg Kroah-Hartman --- include/linux/usb_usual.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 17df3600bcef..e84e769aaddc 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -64,7 +64,9 @@ US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \ /* cannot handle READ_CAPACITY_16 */ \ US_FLAG(INITIAL_READ10, 0x00100000) \ - /* Initial READ(10) (and others) must be retried */ + /* Initial READ(10) (and others) must be retried */ \ + US_FLAG(WRITE_CACHE, 0x00200000) \ + /* Write Cache status is not available */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.2.3 From 0d5ff306582834e3172365d619ec0cfe7a4f79ba Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Tue, 10 Jul 2012 17:19:25 +0100 Subject: USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds Reorder elements in the usb_host_interface structure to remove 8 bytes of padding on 64 bit builds , and so shrink it's size to 40 bytes. usb_interface_descriptor is a odd size which leaves a gap that is not big enough to hold a pointer, so moving extralen into that gap removes the need for more padding. Signed-off-by: Richard Kennedy Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index f8506ed0f97b..873956bec25e 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -77,14 +77,15 @@ struct usb_host_endpoint { struct usb_host_interface { struct usb_interface_descriptor desc; + int extralen; + unsigned char *extra; /* Extra descriptors */ + /* array of desc.bNumEndpoint endpoints associated with this * interface setting. these will be in no particular order. */ struct usb_host_endpoint *endpoint; char *string; /* iInterface string, if present */ - unsigned char *extra; /* Extra descriptors */ - int extralen; }; enum usb_interface_condition { -- cgit v1.2.3 From d81a5d1956731c453b85c141458d4ff5d6cc5366 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Tue, 10 Jul 2012 19:10:06 -0300 Subject: USB: add USB_VENDOR_AND_INTERFACE_INFO() macro A lot of Broadcom Bluetooth devices provides vendor specific interface class and we are getting flooded by patches adding new device support. This change will help us enable support for any other Broadcom with vendor specific device that arrives in the future. Only the product id changes for those devices, so this macro would be perfect for us: { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) } Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan Acked-by: Henrik Rydberg Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 873956bec25e..30d1ae38eab1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -861,6 +861,27 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) .bInterfaceSubClass = (sc), \ .bInterfaceProtocol = (pr) +/** + * USB_VENDOR_AND_INTERFACE_INFO - describe a specific usb vendor with a class of usb interfaces + * @vend: the 16 bit USB Vendor ID + * @cl: bInterfaceClass value + * @sc: bInterfaceSubClass value + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific vendor with a specific class of interfaces. + * + * This is especially useful when explicitly matching devices that have + * vendor specific bDeviceClass values, but standards-compliant interfaces. + */ +#define USB_VENDOR_AND_INTERFACE_INFO(vend, cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ + | USB_DEVICE_ID_MATCH_VENDOR, \ + .idVendor = (vend), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr) + /* ----------------------------------------------------------------------- */ /* Stuff for dynamic usb ids */ -- cgit v1.2.3 From a4232963757e62b3b97bbba07cb92c6d448f6f4b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 3 Jul 2012 18:49:35 +0200 Subject: driver-core: Move kobj_to_dev from genhd.h to device.h This function is not really specific to the genhd layer and there are various re-implementations or open-coded variants of it all throughout the kernel. To avoid further duplications move the function to a more generic place. While moving also convert it from a macro to a inline function. Potential users of this function can be detected and converted using the following coccinelle patch: // @@ expression k; @@ -container_of(k, struct device, kobj) +kobj_to_dev(kobj) // Signed-off-by: Lars-Peter Clausen Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 5 +++++ include/linux/genhd.h | 1 - 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 161d96241b1b..5c4495c8fe3f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -689,6 +689,11 @@ struct device { void (*release)(struct device *dev); }; +static inline struct device *kobj_to_dev(struct kobject *kobj) +{ + return container_of(kobj, struct device, kobj); +} + /* Get the wakeup routines, which depend on struct device */ #include diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 017a7fb5a1fc..ae0aaa9d42fa 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -16,7 +16,6 @@ #ifdef CONFIG_BLOCK -#define kobj_to_dev(k) container_of((k), struct device, kobj) #define dev_to_disk(device) container_of((device), struct gendisk, part0.__dev) #define dev_to_part(device) container_of((device), struct hd_struct, __dev) #define disk_to_dev(disk) (&(disk)->part0.__dev) -- cgit v1.2.3 From a6df1ae9383697c4eb1365176002f154982325ad Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 16 Jul 2012 01:41:36 +0000 Subject: tcp: add OFO snmp counters Add three SNMP TCP counters, to better track TCP behavior at global stage (netstat -s), when packets are received Out Of Order (OFO) TCPOFOQueue : Number of packets queued in OFO queue TCPOFODrop : Number of packets meant to be queued in OFO but dropped because socket rcvbuf limit hit. TCPOFOMerge : Number of packets in OFO that were merged with other packets. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/snmp.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 2e68f5ba0389..6e4c51123828 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -233,7 +233,10 @@ enum LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ - LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */ + LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ + LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ __LINUX_MIB_MAX }; -- cgit v1.2.3 From 51d7cccf07238f5236c5b9269231a30dd5f8e714 Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Mon, 16 Jul 2012 04:28:49 +0000 Subject: net: make sock diag per-namespace Before this patch sock_diag works for init_net only and dumps information about sockets from all namespaces. This patch expands sock_diag for all name-spaces. It creates a netlink kernel socket for each netns and filters data during dumping. v2: filter accoding with netns in all places remove an unused variable. Cc: "David S. Miller" Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy Cc: Pavel Emelyanov CC: Eric Dumazet Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Andrew Vagin Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller --- include/linux/sock_diag.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index 6793fac5eab5..e3e395acc2fd 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -44,6 +44,5 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie); int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr); -extern struct sock *sock_diag_nlsk; #endif /* KERNEL */ #endif -- cgit v1.2.3 From 0a4dd594982a321699000218715e28664ec49169 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 12 Jul 2012 19:33:05 +0000 Subject: etherdevice: Rename random_ether_addr to eth_random_addr Add some API symmetry to eth_broadcast_addr and add a #define to the old name for backward compatibility. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- include/linux/etherdevice.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 98a27cccedfd..d426336d92d9 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -124,19 +124,21 @@ static inline bool is_valid_ether_addr(const u8 *addr) } /** - * random_ether_addr - Generate software assigned random Ethernet address + * eth_random_addr - Generate software assigned random Ethernet address * @addr: Pointer to a six-byte array containing the Ethernet address * * Generate a random Ethernet address (MAC) that is not multicast * and has the local assigned bit set. */ -static inline void random_ether_addr(u8 *addr) +static inline void eth_random_addr(u8 *addr) { - get_random_bytes (addr, ETH_ALEN); - addr [0] &= 0xfe; /* clear multicast bit */ - addr [0] |= 0x02; /* set local assignment bit (IEEE802) */ + get_random_bytes(addr, ETH_ALEN); + addr[0] &= 0xfe; /* clear multicast bit */ + addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ } +#define random_ether_addr(addr) eth_random_addr(addr) + /** * eth_broadcast_addr - Assign broadcast address * @addr: Pointer to a six-byte array containing the Ethernet address @@ -160,7 +162,7 @@ static inline void eth_broadcast_addr(u8 *addr) static inline void eth_hw_addr_random(struct net_device *dev) { dev->addr_assign_type |= NET_ADDR_RANDOM; - random_ether_addr(dev->dev_addr); + eth_random_addr(dev->dev_addr); } /** -- cgit v1.2.3 From 282f23c6ee343126156dd41218b22ece96d747e3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 Jul 2012 10:13:05 +0200 Subject: tcp: implement RFC 5961 3.2 Implement the RFC 5691 mitigation against Blind Reset attack using RST bit. Idea is to validate incoming RST sequence, to match RCV.NXT value, instead of previouly accepted window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND) If sequence is in window but not an exact match, send a "challenge ACK", so that the other part can resend an RST with the appropriate sequence. Add a new sysctl, tcp_challenge_ack_limit, to limit number of challenge ACK sent per second. Add a new SNMP counter to count number of challenge acks sent. (netstat -s | grep TCPChallengeACK) Signed-off-by: Eric Dumazet Cc: Kiran Kumar Kella Signed-off-by: David S. Miller --- include/linux/snmp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 6e4c51123828..673e0e928b2b 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -237,6 +237,7 @@ enum LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */ LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ + LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ __LINUX_MIB_MAX }; -- cgit v1.2.3 From 84f10708f73254878246772cead70a2eb6a123f2 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 12 Jul 2012 16:17:33 -0700 Subject: cfg80211: support TX error rate CQM Let the user configure serveral TX error conection quality monitoring parameters: % error rate, survey interval, and # of attempted packets. On exceeding the TX failure rate over the given interval, the driver will send a CQM notify event with the actual TX failure rate and packets attempted. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e791487ead37..d6cfacc3ce4d 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1550,6 +1550,8 @@ enum nl80211_attrs { /* default RSSI threshold for scan results if none specified. */ #define NL80211_SCAN_RSSI_THOLD_OFF -300 +#define NL80211_CQM_TXE_MAX_INTVL 1800 + /** * enum nl80211_iftype - (virtual) interface types * @@ -2589,6 +2591,17 @@ enum nl80211_ps_state { * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many * consecutive packets were not acknowledged by the peer + * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures + * during the given %NL80211_ATTR_CQM_TXE_INTVL before an + * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and + * %NL80211_ATTR_CQM_TXE_PKTS is generated. + * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given + * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is + * checked. + * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic + * interval in which %NL80211_ATTR_CQM_TXE_PKTS and + * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. * @__NL80211_ATTR_CQM_AFTER_LAST: internal * @NL80211_ATTR_CQM_MAX: highest key attribute */ @@ -2598,6 +2611,9 @@ enum nl80211_attr_cqm { NL80211_ATTR_CQM_RSSI_HYST, NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, NL80211_ATTR_CQM_PKT_LOSS_EVENT, + NL80211_ATTR_CQM_TXE_RATE, + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, /* keep last */ __NL80211_ATTR_CQM_AFTER_LAST, -- cgit v1.2.3 From d2cfdb055d77f8d0864d75adfc1a3f0e0ec40e69 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 17 Jul 2012 11:34:06 +0530 Subject: regulator: tps65910: set input_supply on desc unconditionally Set the supply_name in the regulator descriptor unconditionally and make this parameter as required parameter in the device node for successfully registration of the regulator. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- include/linux/mfd/tps65910.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 1aca1fbbc138..6c4c478e21a4 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -799,7 +799,6 @@ struct tps65910_sleep_keepon_data { /** * struct tps65910_board * Board platform data may be used to initialize regulators. - * @input_supply: Name of input supply regulator. */ struct tps65910_board { @@ -812,7 +811,6 @@ struct tps65910_board { struct tps65910_sleep_keepon_data *slp_keepon; bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS]; - const char *input_supply[TPS65910_NUM_REGS]; struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS]; }; -- cgit v1.2.3 From 57b5ce072e7361218a8e2ea1d62960cbb71d9cff Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 12 Jul 2012 11:49:18 -0700 Subject: cfg80211: add cellular base station regulatory hint support Cellular base stations can provide hints to cfg80211 about where they think we are. This can be done for example on a cell phone. To enable these hints we simply allow them through as user regulatory hints but we allow userspace to clasify the hint as either coming directly from the user or coming from a cellular base station. This option is only available when you enable CONFIG_CFG80211_CERTIFICATION_ONUS. The base station hints themselves will not be processed by the core unless at least one device on the system supports this feature. Signed-off-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index d6cfacc3ce4d..2f3878806403 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1245,6 +1245,12 @@ enum nl80211_commands { * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds * or 0 to disable background scan. * + * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from + * userspace. If unset it is assumed the hint comes directly from + * a user. If set code could specify exactly what type of source + * was used to provide the hint. For the different types of + * allowed user regulatory hints see nl80211_user_reg_hint_type. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1498,6 +1504,8 @@ enum nl80211_attrs { NL80211_ATTR_WDEV, + NL80211_ATTR_USER_REG_HINT_TYPE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2060,6 +2068,26 @@ enum nl80211_dfs_regions { NL80211_DFS_JP = 3, }; +/** + * enum nl80211_user_reg_hint_type - type of user regulatory hint + * + * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always + * assumed if the attribute is not set. + * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular + * base station. Device drivers that have been tested to work + * properly to support this type of hint can enable these hints + * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature + * capability on the struct wiphy. The wireless core will + * ignore all cell base station hints until at least one device + * present has been registered with the wireless core that + * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a + * supported feature. + */ +enum nl80211_user_reg_hint_type { + NL80211_USER_REG_HINT_USER = 0, + NL80211_USER_REG_HINT_CELL_BASE = 1, +}; + /** * enum nl80211_survey_info - survey information * @@ -2963,11 +2991,15 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up * the connected inactive stations in AP mode. + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to suppport receiving regulatory hints from + * cellular base stations. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, NL80211_FEATURE_HT_IBSS = 1 << 1, NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, }; /** -- cgit v1.2.3 From 0c24604b68fc7810d429d6c3657b6f148270e528 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 Jul 2012 01:41:30 +0000 Subject: tcp: implement RFC 5961 4.2 Implement the RFC 5691 mitigation against Blind Reset attack using SYN bit. Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop incoming packet, instead of resetting the session. Add a new SNMP counter to count number of challenge acks sent in response to SYN packets. (netstat -s | grep TCPSYNChallenge) Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session because of a SYN flag. Signed-off-by: Eric Dumazet Cc: Kiran Kumar Kella Signed-off-by: David S. Miller --- include/linux/snmp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 673e0e928b2b..e5fcbd079e4a 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -208,7 +208,6 @@ enum LINUX_MIB_TCPDSACKOFOSENT, /* TCPDSACKOfoSent */ LINUX_MIB_TCPDSACKRECV, /* TCPDSACKRecv */ LINUX_MIB_TCPDSACKOFORECV, /* TCPDSACKOfoRecv */ - LINUX_MIB_TCPABORTONSYN, /* TCPAbortOnSyn */ LINUX_MIB_TCPABORTONDATA, /* TCPAbortOnData */ LINUX_MIB_TCPABORTONCLOSE, /* TCPAbortOnClose */ LINUX_MIB_TCPABORTONMEMORY, /* TCPAbortOnMemory */ @@ -238,6 +237,7 @@ enum LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ + LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ __LINUX_MIB_MAX }; -- cgit v1.2.3 From 30fdd8a082a00126a6feec994e43e8dc12f5bccb Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 17 Jul 2012 05:22:35 +0000 Subject: netpoll: move np->dev and np->dev_name init into __netpoll_setup() Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/netpoll.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 5dfa091c3347..28f5389c924b 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -43,7 +43,7 @@ struct netpoll_info { void netpoll_send_udp(struct netpoll *np, const char *msg, int len); void netpoll_print_options(struct netpoll *np); int netpoll_parse_options(struct netpoll *np, char *opt); -int __netpoll_setup(struct netpoll *np); +int __netpoll_setup(struct netpoll *np, struct net_device *ndev); int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); -- cgit v1.2.3 From bd2d0837abc0206ecdd3f6b9fc8c25b55b63c96b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 17 Jul 2012 05:22:36 +0000 Subject: team: add netpoll support It's done in very similar way this is done in bonding and bridge. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index dfa0c8e0ab84..7fd0cdeb9444 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -13,6 +13,8 @@ #ifdef __KERNEL__ +#include + struct team_pcpu_stats { u64 rx_packets; u64 rx_bytes; @@ -60,6 +62,10 @@ struct team_port { unsigned int mtu; } orig; +#ifdef CONFIG_NET_POLL_CONTROLLER + struct netpoll *np; +#endif + long mode_priv[0]; }; @@ -73,6 +79,33 @@ static inline bool team_port_txable(struct team_port *port) return port->linkup && team_port_enabled(port); } +#ifdef CONFIG_NET_POLL_CONTROLLER +static inline void team_netpoll_send_skb(struct team_port *port, + struct sk_buff *skb) +{ + struct netpoll *np = port->np; + + if (np) + netpoll_send_skb(np, skb); +} +#else +static inline void team_netpoll_send_skb(struct team_port *port, + struct sk_buff *skb) +{ +} +#endif + +static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, + struct sk_buff *skb) +{ + skb->dev = port->dev; + if (unlikely(netpoll_tx_running(port->dev))) { + team_netpoll_send_skb(port, skb); + return 0; + } + return dev_queue_xmit(skb); +} + struct team_mode_ops { int (*init)(struct team *team); void (*exit)(struct team *team); -- cgit v1.2.3 From 47610d98e884dd47fd874469a105797e1a9f5ed0 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 2 Jul 2012 23:32:50 +0200 Subject: extcon: spelling of detach in function doc Signed-off-by: Peter Meerwald Signed-off-by: Myungjoo Ham Signed-off-by: Greg Kroah-Hartman --- include/linux/extcon/extcon_gpio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/extcon/extcon_gpio.h b/include/linux/extcon/extcon_gpio.h index a2129b73dcb1..2d8307f7d67d 100644 --- a/include/linux/extcon/extcon_gpio.h +++ b/include/linux/extcon/extcon_gpio.h @@ -31,7 +31,7 @@ * @irq_flags IRQ Flags (e.g., IRQF_TRIGGER_LOW). * @state_on print_state is overriden with state_on if attached. If Null, * default method of extcon class is used. - * @state_off print_state is overriden with state_on if dettached. If Null, + * @state_off print_state is overriden with state_on if detached. If Null, * default method of extcon class is used. * * Note that in order for state_on or state_off to be valid, both state_on -- cgit v1.2.3 From 4a53ffae6afc94bab803087245b3b45e712c21c8 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 9 Jul 2012 17:03:18 -0700 Subject: pstore/ram_core: Get rid of prz->ecc_symsize and prz->ecc_poly The struct members were never used anywhere outside of persistent_ram_init_ecc(), so there's actually no need for them to be in the struct. If we ever want to make polynomial or symbol size configurable, it would make more sense to just pass initialized rs_decoder to the persistent_ram init functions. Signed-off-by: Anton Vorontsov Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index e681af92c04b..a0975c02194a 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -41,8 +41,6 @@ struct persistent_ram_zone { int bad_blocks; int ecc_block_size; int ecc_size; - int ecc_symsize; - int ecc_poly; char *old_log; size_t old_log_size; -- cgit v1.2.3 From 5ca5d4e61d0cac15f36160ab48425c6e43bf2e2f Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 9 Jul 2012 17:03:19 -0700 Subject: pstore/ram: Make ECC size configurable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is now pretty straightforward: instead of using bool, just pass an integer. For backwards compatibility ramoops.ecc=1 means 16 bytes ECC (using 1 byte for ECC isn't much of use anyway). Suggested-by: Arve HjønnevÃ¥g Signed-off-by: Anton Vorontsov Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index a0975c02194a..94b79f173365 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -48,7 +48,7 @@ struct persistent_ram_zone { struct persistent_ram_zone * __devinit persistent_ram_new(phys_addr_t start, size_t size, - bool ecc); + int ecc_size); void persistent_ram_free(struct persistent_ram_zone *prz); void persistent_ram_zap(struct persistent_ram_zone *prz); @@ -74,7 +74,7 @@ struct ramoops_platform_data { unsigned long record_size; unsigned long console_size; int dump_oops; - bool ecc; + int ecc_size; }; #endif -- cgit v1.2.3 From c1743cbc8d20d208bb1d2b10598204f2d89b144c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 9 Jul 2012 17:03:20 -0700 Subject: pstore/ram_core: Get rid of prz->ecc enable/disable flag Nowadays we can use prz->ecc_size as a flag, no need for the special member in the prz struct. Signed-off-by: Anton Vorontsov Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 94b79f173365..dcf805f56bc6 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -33,7 +33,6 @@ struct persistent_ram_zone { size_t buffer_size; /* ECC correction */ - bool ecc; char *par_buffer; char *par_header; struct rs_control *rs_decoder; -- cgit v1.2.3 From 897dba027445be93f40e5caf550556ca38c48c51 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 9 Jul 2012 17:10:40 -0700 Subject: pstore: Introduce write_buf backend callback For function tracing we need to stop using pstore.buf directly, since in a tracing callback we can't use spinlocks, and thus we can't safely use the global buffer. With write_buf callback, backends no longer need to access pstore.buf directly, and thus we can pass any buffers (e.g. allocated on stack). Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pstore.h b/include/linux/pstore.h index 1bd014b8e432..b107484192fc 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -48,6 +48,10 @@ struct pstore_info { int (*write)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); + int (*write_buf)(enum pstore_type_id type, + enum kmsg_dump_reason reason, u64 *id, + unsigned int part, const char *buf, size_t size, + struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, struct pstore_info *psi); void *data; -- cgit v1.2.3 From 060287b8c467bf49a594d8d669e1986c6d8d76b0 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 9 Jul 2012 17:10:41 -0700 Subject: pstore: Add persistent function tracing With this support kernel can save function call chain log into a persistent ram buffer that can be decoded and dumped after reboot through pstore filesystem. It can be used to determine what function was last called before a reset or panic. We store the log in a binary format and then decode it at read time. p.s. Mostly the code comes from trace_persistent.c driver found in the Android git tree, written by Colin Cross (according to sign-off history). I reworked the driver a little bit, and ported it to pstore. Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pstore.h b/include/linux/pstore.h index b107484192fc..120443b0fda5 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -30,6 +30,7 @@ enum pstore_type_id { PSTORE_TYPE_DMESG = 0, PSTORE_TYPE_MCE = 1, PSTORE_TYPE_CONSOLE = 2, + PSTORE_TYPE_FTRACE = 3, PSTORE_TYPE_UNKNOWN = 255 }; @@ -57,6 +58,14 @@ struct pstore_info { void *data; }; + +#ifdef CONFIG_PSTORE_FTRACE +extern void pstore_ftrace_call(unsigned long ip, unsigned long parent_ip); +#else +static inline void pstore_ftrace_call(unsigned long ip, unsigned long parent_ip) +{ } +#endif + #ifdef CONFIG_PSTORE extern int pstore_register(struct pstore_info *); #else -- cgit v1.2.3 From a694d1b5916a486ce25fb5f2b39f2627f7afd5f3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 9 Jul 2012 17:10:44 -0700 Subject: pstore/ram: Add ftrace messages handling The ftrace log size is configurable via ramoops.ftrace_size module option, and the log itself is available via /ftrace-ramoops file. Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index dcf805f56bc6..af848e1593b9 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -72,6 +72,7 @@ struct ramoops_platform_data { unsigned long mem_address; unsigned long record_size; unsigned long console_size; + unsigned long ftrace_size; int dump_oops; int ecc_size; }; -- cgit v1.2.3 From 597d92891b8859b4b4949fd08e25e60fc80ddaaf Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Mon, 16 Jul 2012 16:39:10 -0400 Subject: NFS: Split out NFS v2 inode operations This patch moves the NFS v2 file and directory inode functions into files that are only compiled whet CONFIG_NFS_V2 is enabled. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index b23cfc120edb..6c38bc9c0081 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -427,7 +427,6 @@ extern __be32 root_nfs_parse_addr(char *name); /*__init*/ /* * linux/fs/nfs/file.c */ -extern const struct inode_operations nfs_file_inode_operations; #ifdef CONFIG_NFS_V3 extern const struct inode_operations nfs3_file_inode_operations; #endif /* CONFIG_NFS_V3 */ @@ -485,7 +484,6 @@ extern ssize_t nfs_file_direct_write(struct kiocb *iocb, /* * linux/fs/nfs/dir.c */ -extern const struct inode_operations nfs_dir_inode_operations; #ifdef CONFIG_NFS_V3 extern const struct inode_operations nfs3_dir_inode_operations; #endif /* CONFIG_NFS_V3 */ -- cgit v1.2.3 From ab96291ea16b6b9c76bfac35ccbb26a15ecb01ce Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Mon, 16 Jul 2012 16:39:11 -0400 Subject: NFS: Split out NFS v3 inode operations This patch moves the NFS v3 file and directory inode functions into files that are only compiled whet CONFIG_NFS_V3 is enabled. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 6c38bc9c0081..4b6043c20f77 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -427,9 +427,6 @@ extern __be32 root_nfs_parse_addr(char *name); /*__init*/ /* * linux/fs/nfs/file.c */ -#ifdef CONFIG_NFS_V3 -extern const struct inode_operations nfs3_file_inode_operations; -#endif /* CONFIG_NFS_V3 */ extern const struct file_operations nfs_file_operations; #ifdef CONFIG_NFS_V4 extern const struct file_operations nfs4_file_operations; @@ -484,9 +481,6 @@ extern ssize_t nfs_file_direct_write(struct kiocb *iocb, /* * linux/fs/nfs/dir.c */ -#ifdef CONFIG_NFS_V3 -extern const struct inode_operations nfs3_dir_inode_operations; -#endif /* CONFIG_NFS_V3 */ extern const struct file_operations nfs_dir_operations; extern const struct dentry_operations nfs_dentry_operations; -- cgit v1.2.3 From 66177cc10295ffdfc613c06f59b07a577d91ee82 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 17 Jul 2012 16:37:45 +0530 Subject: usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h Adds header file protection macros to avoid multiple inclusion. Signed-off-by: Sachin Kamat Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/s3c-hsotg.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h index 97ec12c2ded4..8b79e0967f9c 100644 --- a/include/linux/platform_data/s3c-hsotg.h +++ b/include/linux/platform_data/s3c-hsotg.h @@ -12,6 +12,9 @@ * published by the Free Software Foundation. */ +#ifndef __LINUX_USB_S3C_HSOTG_H +#define __LINUX_USB_S3C_HSOTG_H + enum s3c_hsotg_dmamode { S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ S3C_HSOTG_DMA_ONLY, /* always use DMA */ @@ -33,3 +36,5 @@ struct s3c_hsotg_plat { }; extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); + +#endif /* __LINUX_USB_S3C_HSOTG_H */ -- cgit v1.2.3 From 6a7b36aa4b0afbe7a9798feac16de47ad856f358 Mon Sep 17 00:00:00 2001 From: Chandrabhanu Mahapatra Date: Tue, 10 Jul 2012 19:05:37 +0530 Subject: GPIO: PCA953X: Increase size of invert variable to support 24 bit TCA6424 is a low voltage 24 bit I2C and SMBus I/O expander of pca953x family similar to its 16 bit predecessor TCA6416. It comes with three 8-bit active Input, Output, Polarity Inversion and Configuration registers each. The polarity of Input ports can be reversed by setting the appropiate bit in Polarity Inversion registers. The variables corresponding to Input, Output and Configuration registers have already been updated to support 24 bit values. This patch thus updates the invert variable of PCA953X platform data to support 24 bit. Signed-off-by: Chandrabhanu Mahapatra Signed-off-by: Linus Walleij --- include/linux/i2c/pca953x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h index 139ba52667c8..3c98dd4f901f 100644 --- a/include/linux/i2c/pca953x.h +++ b/include/linux/i2c/pca953x.h @@ -11,7 +11,7 @@ struct pca953x_platform_data { unsigned gpio_base; /* initial polarity inversion setting */ - uint16_t invert; + u32 invert; /* interrupt base */ int irq_base; -- cgit v1.2.3 From 7eea1a23b47743be2dab4d29ad1f5b65f7ef3d7b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 16 Jul 2012 11:46:52 +0200 Subject: bcma: cc: update defines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 51 ++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index fbd0d49dc4d2..3c80885fa829 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,7 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ -#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -45,6 +45,7 @@ #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */ #define BCMA_CC_CORECTL 0x0008 #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ @@ -122,10 +123,58 @@ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ #define BCMA_CC_FLASHCTL 0x0040 +/* Start/busy bit in flashcontrol */ +#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff +#define BCMA_CC_FLASHCTL_ACTION 0x00000700 +#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ #define BCMA_CC_FLASHCTL_START 0x80000000 #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +/* Flashcontrol action + opcodes for ST flashes */ +#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ +#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ +#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ +#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ +#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ +#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ +#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ +#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ +#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ +#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ +#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ +#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ +/* Flashcontrol action + opcodes for Atmel flashes */ +#define BCMA_CC_FLASHCTL_AT_READ 0x07e8 +#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 +#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 +#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 +#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 +#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 +#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 +#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 +#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 +#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 +#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 +#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 +#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 +#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 +#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 #define BCMA_CC_FLASHADDR 0x0044 #define BCMA_CC_FLASHDATA 0x0048 +/* Status register bits for ST flashes */ +#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ +#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ +#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ +#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 +#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ +/* Status register bits for Atmel flashes */ +#define BCMA_CC_FLASHDATA_AT_READY 0x80 +#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 +#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 +#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -- cgit v1.2.3 From 67a101f573b0cb1043c8c305112113450cb9fdbf Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 17 Jul 2012 11:37:07 -0700 Subject: pstore: Headers should include all stuff they use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Headers should really include all the needed prototypes, types, defines etc. to be self-contained. This is a long-standing issue, but apparently the new tracing code unearthed it (SMP=n is also a prerequisite): In file included from fs/pstore/internal.h:4:0, from fs/pstore/ftrace.c:21: include/linux/pstore.h:43:15: error: field ‘read_mutex’ has incomplete type While at it, I also added the following: linux/types.h -> size_t, phys_addr_t, uXX and friends linux/spinlock.h -> spinlock_t linux/errno.h -> Exxxx linux/time.h -> struct timespec (struct passed by value) struct module and rs_control forward declaration (passed via pointers). Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore.h | 6 ++++++ include/linux/pstore_ram.h | 1 + 2 files changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pstore.h b/include/linux/pstore.h index 120443b0fda5..c892587d9b81 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -24,6 +24,10 @@ #include #include +#include +#include +#include +#include /* types */ enum pstore_type_id { @@ -34,6 +38,8 @@ enum pstore_type_id { PSTORE_TYPE_UNKNOWN = 255 }; +struct module; + struct pstore_info { struct module *owner; char *name; diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index af848e1593b9..ba2b211aaa81 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -24,6 +24,7 @@ #include struct persistent_ram_buffer; +struct rs_control; struct persistent_ram_zone { phys_addr_t paddr; -- cgit v1.2.3 From d9914cf66181b8aa0929775f5c6f675c6ebc3eb5 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Tue, 17 Jul 2012 21:37:27 +0200 Subject: PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND As discussed in http://thread.gmane.org/gmane.linux.kernel/1249726/focus=1288990, the capability introduced in 4d7e30d98939a0340022ccd49325a3d70f7e0238 to govern EPOLLWAKEUP seems misnamed: this capability is about governing the ability to suspend the system, not using a particular API flag (EPOLLWAKEUP). We should make the name of the capability more general to encourage reuse in related cases. (Whether or not this capability should also be used to govern the use of /sys/power/wake_lock is a question that needs to be separately resolved.) This patch renames the capability to CAP_BLOCK_SUSPEND. In order to ensure that the old capability name doesn't make it out into the wild, could you please apply and push up the tree to ensure that it is incorporated for the 3.5 release. Signed-off-by: Michael Kerrisk Acked-by: Serge Hallyn Signed-off-by: Rafael J. Wysocki --- include/linux/capability.h | 6 +++--- include/linux/eventpoll.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index 68d56effc328..d10b7ed595b1 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -360,11 +360,11 @@ struct cpu_vfs_cap_data { #define CAP_WAKE_ALARM 35 -/* Allow preventing system suspends while epoll events are pending */ +/* Allow preventing system suspends */ -#define CAP_EPOLLWAKEUP 36 +#define CAP_BLOCK_SUSPEND 36 -#define CAP_LAST_CAP CAP_EPOLLWAKEUP +#define CAP_LAST_CAP CAP_BLOCK_SUSPEND #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h index 6f8be328770a..f4bb378ccf6a 100644 --- a/include/linux/eventpoll.h +++ b/include/linux/eventpoll.h @@ -34,7 +34,7 @@ * re-allowed until epoll_wait is called again after consuming the wakeup * event(s). * - * Requires CAP_EPOLLWAKEUP + * Requires CAP_BLOCK_SUSPEND */ #define EPOLLWAKEUP (1 << 29) -- cgit v1.2.3 From 6575820221f7a4dd6eadecf7bf83cdd154335eda Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jul 2012 12:39:26 -0700 Subject: workqueue: perform cpu down operations from low priority cpu_notifier() Currently, all workqueue cpu hotplug operations run off CPU_PRI_WORKQUEUE which is higher than normal notifiers. This is to ensure that workqueue is up and running while bringing up a CPU before other notifiers try to use workqueue on the CPU. Per-cpu workqueues are supposed to remain working and bound to the CPU for normal CPU_DOWN_PREPARE notifiers. This holds mostly true even with workqueue offlining running with higher priority because workqueue CPU_DOWN_PREPARE only creates a bound trustee thread which runs the per-cpu workqueue without concurrency management without explicitly detaching the existing workers. However, if the trustee needs to create new workers, it creates unbound workers which may wander off to other CPUs while CPU_DOWN_PREPARE notifiers are in progress. Furthermore, if the CPU down is cancelled, the per-CPU workqueue may end up with workers which aren't bound to the CPU. While reliably reproducible with a convoluted artificial test-case involving scheduling and flushing CPU burning work items from CPU down notifiers, this isn't very likely to happen in the wild, and, even when it happens, the effects are likely to be hidden by the following successful CPU down. Fix it by using different priorities for up and down notifiers - high priority for up operations and low priority for down operations. Workqueue cpu hotplug operations will soon go through further cleanup. Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Acked-by: "Rafael J. Wysocki" --- include/linux/cpu.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 2e9b9ebbeb78..ce7a074f2519 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -73,8 +73,9 @@ enum { /* migration should happen before other stuff but after perf */ CPU_PRI_PERF = 20, CPU_PRI_MIGRATION = 10, - /* prepare workqueues for other notifiers */ - CPU_PRI_WORKQUEUE = 5, + /* bring up workqueues before normal notifiers and down after */ + CPU_PRI_WORKQUEUE_UP = 5, + CPU_PRI_WORKQUEUE_DOWN = -5, }; #define CPU_ONLINE 0x0002 /* CPU (unsigned)v is up */ -- cgit v1.2.3 From cbe7cbf5a666ad9dfe2e0c276066131af73769ab Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 17 Jul 2012 12:11:12 -0700 Subject: pstore/ram: Make tracing log versioned Decoding the binary trace w/ a different kernel might be troublesome since we convert addresses to symbols. For kernels with minimal changes, the mappings would probably match, but it's not guaranteed at all. (But still we could convert the addresses by hand, since we do print raw addresses.) If we use modules, the symbols could be loaded at different addresses from the previously booted kernel, and so this would also fail, but there's nothing we can do about it. Also, the binary data format that pstore/ram is using in its ringbuffer may change between the kernels, so here we too must ensure that we're running the same kernel. So, there are two questions really: 1. How to compute the unique kernel tag; 2. Where to store it. In this patch we're using LINUX_VERSION_CODE, just as hibernation (suspend-to-disk) does. This way we are protecting from the kernel version mismatch, making sure that we're running the same kernel version and patch level. We could use CRC of a symbol table (as suggested by Tony Luck), but for now let's not be that strict. And as for storing, we are using a small trick here. Instead of allocating a dedicated buffer for the tag (i.e. another prz), or hacking ram_core routines to "reserve" some control data in the buffer, we are just encoding the tag into the buffer signature (and XOR'ing it with the actual signature value, so that buffers not needing a tag can just pass zero, which will result into the plain old PRZ signature). Suggested-by: Steven Rostedt Suggested-by: Tony Luck Suggested-by: Colin Cross Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- include/linux/pstore_ram.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index ba2b211aaa81..098d2a838296 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -47,7 +47,7 @@ struct persistent_ram_zone { }; struct persistent_ram_zone * __devinit persistent_ram_new(phys_addr_t start, - size_t size, + size_t size, u32 sig, int ecc_size); void persistent_ram_free(struct persistent_ram_zone *prz); void persistent_ram_zap(struct persistent_ram_zone *prz); -- cgit v1.2.3 From 5bdca4e0768d3e0f4efa43d9a2cc8210aeb91ab9 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 10 Jul 2012 11:53:34 -0700 Subject: libceph: fix messenger retry In ancient times, the messenger could both initiate and accept connections. An artifact if that was data structures to store/process an incoming ceph_msg_connect request and send an outgoing ceph_msg_connect_reply. Sadly, the negotiation code was referencing those structures and ignoring important information (like the peer's connect_seq) from the correct ones. Among other things, this fixes tight reconnect loops where the server sends RETRY_SESSION and we (the client) retries with the same connect_seq as last time. This bug pretty easily triggered by injecting socket failures on the MDS and running some fs workload like workunits/direct_io/test_sync_io. Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 2521a95fa6d9..44c87e731e9d 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -163,16 +163,8 @@ struct ceph_connection { /* connection negotiation temps */ char in_banner[CEPH_BANNER_MAX_LEN]; - union { - struct { /* outgoing connection */ - struct ceph_msg_connect out_connect; - struct ceph_msg_connect_reply in_reply; - }; - struct { /* incoming */ - struct ceph_msg_connect in_connect; - struct ceph_msg_connect_reply out_reply; - }; - }; + struct ceph_msg_connect out_connect; + struct ceph_msg_connect_reply in_reply; struct ceph_entity_addr actual_peer_addr; /* message out temps */ -- cgit v1.2.3 From 07b8481d4aff73d6f451f25e74ea10240ff5131e Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 13 Jul 2012 00:25:45 -0700 Subject: Input: add MELFAS mms114 touchscreen driver This is a initial driver for new touchscreen chip mms114 of MELFAS. It uses I2C interface and supports 10 multi touch. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Dmitry Torokhov --- include/linux/i2c/mms114.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/i2c/mms114.h (limited to 'include/linux') diff --git a/include/linux/i2c/mms114.h b/include/linux/i2c/mms114.h new file mode 100644 index 000000000000..5722ebfb2738 --- /dev/null +++ b/include/linux/i2c/mms114.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundationr + */ + +#ifndef __LINUX_MMS114_H +#define __LINUX_MMS114_H + +struct mms114_platform_data { + unsigned int x_size; + unsigned int y_size; + unsigned int contact_threshold; + unsigned int moving_threshold; + bool x_invert; + bool y_invert; + + void (*cfg_pin)(bool); +}; + +#endif /* __LINUX_MMS114_H */ -- cgit v1.2.3 From d3818c92afabecfe6b8e5d2e3734c8753522987c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 Jul 2012 21:38:04 +0000 Subject: ipv6: fix inet6_csk_xmit() We should provide to inet6_csk_route_socket a struct flowi6 pointer, so that net6_csk_xmit() works correctly instead of sending garbage. Also add some consts Signed-off-by: Eric Dumazet Reported-by: Yuchung Cheng Cc: Neal Cardwell Signed-off-by: David S. Miller --- include/linux/ipv6.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index bc6c8fd8ed01..379e433e15e0 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -299,9 +299,9 @@ struct ipv6_pinfo { struct in6_addr rcv_saddr; struct in6_addr daddr; struct in6_pktinfo sticky_pktinfo; - struct in6_addr *daddr_cache; + const struct in6_addr *daddr_cache; #ifdef CONFIG_IPV6_SUBTREES - struct in6_addr *saddr_cache; + const struct in6_addr *saddr_cache; #endif __be32 flow_label; -- cgit v1.2.3 From 1181412c1a671ed4e8fb1736f17e6ec617c68059 Mon Sep 17 00:00:00 2001 From: Saurabh Date: Tue, 17 Jul 2012 09:44:54 +0000 Subject: net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan Reviewed-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/if_tunnel.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 16b92d008bed..5efff60b6f56 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -80,4 +80,18 @@ enum { #define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) +/* VTI-mode i_flags */ +#define VTI_ISVTI 0x0001 + +enum { + IFLA_VTI_UNSPEC, + IFLA_VTI_LINK, + IFLA_VTI_IKEY, + IFLA_VTI_OKEY, + IFLA_VTI_LOCAL, + IFLA_VTI_REMOTE, + __IFLA_VTI_MAX, +}; + +#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) #endif /* _IF_TUNNEL_H_ */ -- cgit v1.2.3 From 47fc28bff82a4dd5f6b41c97e335d10fc78a8e9a Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 9 May 2012 13:58:14 -0400 Subject: usb: add host support for the tilegx architecture This change adds OHCI and EHCI support for the tilegx's on-chip USB hardware. Signed-off-by: Chris Metcalf --- include/linux/usb/tilegx.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 include/linux/usb/tilegx.h (limited to 'include/linux') diff --git a/include/linux/usb/tilegx.h b/include/linux/usb/tilegx.h new file mode 100644 index 000000000000..2d65e3435680 --- /dev/null +++ b/include/linux/usb/tilegx.h @@ -0,0 +1,34 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Structure to contain platform-specific data related to Tile-Gx USB + * controllers. + */ + +#ifndef _LINUX_USB_TILEGX_H +#define _LINUX_USB_TILEGX_H + +#include + +struct tilegx_usb_platform_data { + /* GXIO device index. */ + int dev_index; + + /* GXIO device context. */ + gxio_usb_host_context_t usb_ctx; + + /* Device IRQ. */ + unsigned int irq; +}; + +#endif /* _LINUX_USB_TILEGX_H */ -- cgit v1.2.3 From 83618092645f970668f47b6ee2fec1afdca32efd Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 17 Jul 2012 22:38:18 +0200 Subject: PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h Fix the following sparse warning: include/linux/pm_qos.h:69:28: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat Signed-off-by: Rafael J. Wysocki --- include/linux/pm_qos.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h index 233149cb19f4..9924ea1f22e0 100644 --- a/include/linux/pm_qos.h +++ b/include/linux/pm_qos.h @@ -66,7 +66,7 @@ enum pm_qos_req_action { static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req) { - return req->dev != 0; + return req->dev != NULL; } int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node, -- cgit v1.2.3 From eea03c20ae38a55405c0865ed9adfccc400e4c8e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 18 Jul 2012 18:15:46 -0700 Subject: Make wait_for_device_probe() also do scsi_complete_async_scans() Commit a7a20d103994 ("sd: limit the scope of the async probe domain") make the SCSI device probing run device discovery in it's own async domain. However, as a result, the partition detection was no longer synchronized by async_synchronize_full() (which, despite the name, only synchronizes the global async space, not all of them). Which in turn meant that "wait_for_device_probe()" would not wait for the SCSI partitions to be parsed. And "wait_for_device_probe()" was what the boot time init code relied on for mounting the root filesystem. Now, most people never noticed this, because not only is it timing-dependent, but modern distributions all use initrd. So the root filesystem isn't actually on a disk at all. And then before they actually mount the final disk filesystem, they will have loaded the scsi-wait-scan module, which not only does the expected wait_for_device_probe(), but also does scsi_complete_async_scans(). [ Side note: scsi_complete_async_scans() had also been partially broken, but that was fixed in commit 43a8d39d0137 ("fix async probe regression"), so that same commit a7a20d103994 had actually broken setups even if you used scsi-wait-scan explicitly ] Solve this problem by just moving the scsi_complete_async_scans() call into wait_for_device_probe(). Everybody who wants to wait for device probing to finish really wants the SCSI probing to complete, so there's no reason not to do this. So now "wait_for_device_probe()" really does what the name implies, and properly waits for device probing to finish. This also removes the now unnecessary extra calls to scsi_complete_async_scans(). Reported-and-tested-by: Artem S. Tashkinov Cc: Dan Williams Cc: Alan Stern Cc: James Bottomley Cc: Borislav Petkov Cc: linux-scsi Signed-off-by: Linus Torvalds --- include/linux/device.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 161d96241b1b..6de94151ff6f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -865,8 +865,6 @@ extern int (*platform_notify_remove)(struct device *dev); extern struct device *get_device(struct device *dev); extern void put_device(struct device *dev); -extern void wait_for_device_probe(void); - #ifdef CONFIG_DEVTMPFS extern int devtmpfs_create_node(struct device *dev); extern int devtmpfs_delete_node(struct device *dev); -- cgit v1.2.3 From 66314223aa5e862c9d1d068cb7186b4fd58ebeaa Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 18 Jul 2012 16:07:18 -0600 Subject: ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen Reviewed-by: Pavel Machek Reviewed-by: Rob Herring Reviewed-by: Thomas Petazzoni Signed-off-by: Arnd Bergmann --- include/linux/dw_apb_timer.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h index 07261d52a6df..1148575fd134 100644 --- a/include/linux/dw_apb_timer.h +++ b/include/linux/dw_apb_timer.h @@ -53,4 +53,5 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs); cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs); void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs); +extern struct sys_timer dw_apb_timer; #endif /* __DW_APB_TIMER_H__ */ -- cgit v1.2.3 From c5857ccf293968348e5eb4ebedc68074de3dcda6 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 14 Jul 2012 20:27:52 -0400 Subject: random: remove rand_initialize_irq() With the new interrupt sampling system, we are no longer using the timer_rand_state structure in the irq descriptor, so we can stop initializing it now. [ Merged in fixes from Sedat to find some last missing references to rand_initialize_irq() ] Signed-off-by: "Theodore Ts'o" Signed-off-by: Sedat Dilek --- include/linux/irqdesc.h | 1 - include/linux/random.h | 2 -- 2 files changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index f1e2527006bd..9a323d12de1c 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -39,7 +39,6 @@ struct module; */ struct irq_desc { struct irq_data irq_data; - struct timer_rand_state *timer_rand_state; unsigned int __percpu *kstat_irqs; irq_flow_handler_t handle_irq; #ifdef CONFIG_IRQ_PREFLOW_FASTEOI diff --git a/include/linux/random.h b/include/linux/random.h index 29e217a7e6d0..ac621ce886ca 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -48,8 +48,6 @@ struct rnd_state { #ifdef __KERNEL__ -extern void rand_initialize_irq(int irq); - extern void add_device_randomness(const void *, unsigned int); extern void add_input_randomness(unsigned int type, unsigned int code, unsigned int value); -- cgit v1.2.3 From b4237003cff66084ebeb502412d9cee392e6f52f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 17 Jul 2012 14:20:51 -0400 Subject: random: final removal of IRQF_SAMPLE_RANDOM The IRQF_SAMPLE_RANDOM flag is finally gone from the kernel tree, only three years late. :-) Signed-off-by: "Theodore Ts'o" --- include/linux/interrupt.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index e68a8e53bb59..c5f856a040b9 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -42,7 +42,6 @@ * * IRQF_DISABLED - keep irqs disabled when calling the action handler. * DEPRECATED. This flag is a NOOP and scheduled to be removed - * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator * IRQF_SHARED - allow sharing the irq among several devices * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur * IRQF_TIMER - Flag to mark this interrupt as timer interrupt @@ -61,7 +60,6 @@ * resume time. */ #define IRQF_DISABLED 0x00000020 -#define IRQF_SAMPLE_RANDOM 0x00000040 #define IRQF_SHARED 0x00000080 #define IRQF_PROBE_SHARED 0x00000100 #define __IRQF_TIMER 0x00000200 -- cgit v1.2.3 From af22d9de45caf8b2a99f2b27a927169c029528b4 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 18 Jul 2012 22:33:49 +0000 Subject: net/mlx4: Move MAC_MASK to a common place Define this macro is one common place instead of duplicating it over the code Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/driver.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h index 5f1298b1b5ef..8dc485febc6b 100644 --- a/include/linux/mlx4/driver.h +++ b/include/linux/mlx4/driver.h @@ -37,6 +37,8 @@ struct mlx4_dev; +#define MLX4_MAC_MASK 0xffffffffffffULL + enum mlx4_dev_event { MLX4_DEV_EVENT_CATASTROPHIC_ERROR, MLX4_DEV_EVENT_PORT_UP, -- cgit v1.2.3 From 122733a189d687087364d6dc3ecc7c682554f6a0 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 18 Jul 2012 22:33:50 +0000 Subject: net/rps: Protect cpu_rmap.h from double inclusion Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Acked-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/cpu_rmap.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpu_rmap.h b/include/linux/cpu_rmap.h index 473771a528c0..ac3bbb5b9502 100644 --- a/include/linux/cpu_rmap.h +++ b/include/linux/cpu_rmap.h @@ -1,3 +1,6 @@ +#ifndef __LINUX_CPU_RMAP_H +#define __LINUX_CPU_RMAP_H + /* * cpu_rmap.c: CPU affinity reverse-map support * Copyright 2011 Solarflare Communications Inc. @@ -71,3 +74,4 @@ extern void free_irq_cpu_rmap(struct cpu_rmap *rmap); extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq); #endif +#endif /* __LINUX_CPU_RMAP_H */ -- cgit v1.2.3 From d9236c3f10490cd0b3fd4516af12ba62dcbae0b0 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 18 Jul 2012 22:33:51 +0000 Subject: {NET,IB}/mlx4: Add rmap support to mlx4_assign_eq Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap. If supplied, the assigned IRQ is tracked using rmap infrastructure. Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 6f0d133cc7ad..4d7761f8c3f6 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -36,6 +36,7 @@ #include #include #include +#include #include @@ -784,7 +785,8 @@ void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr, int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr); int mlx4_SYNC_TPT(struct mlx4_dev *dev); int mlx4_test_interrupts(struct mlx4_dev *dev); -int mlx4_assign_eq(struct mlx4_dev *dev, char* name , int* vector); +int mlx4_assign_eq(struct mlx4_dev *dev, char *name, struct cpu_rmap *rmap, + int *vector); void mlx4_release_eq(struct mlx4_dev *dev, int vec); int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port); -- cgit v1.2.3 From 2100c8d2d9db23c0a09901a782bb4e3b21bee298 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 19 Jul 2012 06:43:05 +0000 Subject: net-tcp: Fast Open base This patch impelements the common code for both the client and server. 1. TCP Fast Open option processing. Since Fast Open does not have an option number assigned by IANA yet, it shares the experiment option code 254 by implementing draft-ietf-tcpm-experimental-options with a 16 bits magic number 0xF989. This enables global experiments without clashing the scarce(2) experimental options available for TCP. When the draft status becomes standard (maybe), the client should switch to the new option number assigned while the server supports both numbers for transistion. 2. The new sysctl tcp_fastopen 3. A place holder init function Signed-off-by: Yuchung Cheng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/tcp.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 1888169e07c7..12948f543839 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -243,6 +243,16 @@ static inline unsigned int tcp_optlen(const struct sk_buff *skb) return (tcp_hdr(skb)->doff - 5) * 4; } +/* TCP Fast Open */ +#define TCP_FASTOPEN_COOKIE_MIN 4 /* Min Fast Open Cookie size in bytes */ +#define TCP_FASTOPEN_COOKIE_MAX 16 /* Max Fast Open Cookie size in bytes */ + +/* TCP Fast Open Cookie as stored in memory */ +struct tcp_fastopen_cookie { + s8 len; + u8 val[TCP_FASTOPEN_COOKIE_MAX]; +}; + /* This defines a selective acknowledgement block. */ struct tcp_sack_block_wire { __be32 start_seq; -- cgit v1.2.3 From 783237e8daf13481ee234997cbbbb823872ac388 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 19 Jul 2012 06:43:07 +0000 Subject: net-tcp: Fast Open client - sending SYN-data This patch implements sending SYN-data in tcp_connect(). The data is from tcp_sendmsg() with flag MSG_FASTOPEN (implemented in a later patch). The length of the cookie in tcp_fastopen_req, init'd to 0, controls the type of the SYN. If the cookie is not cached (len==0), the host sends data-less SYN with Fast Open cookie request option to solicit a cookie from the remote. If cookie is not available (len > 0), the host sends a SYN-data with Fast Open cookie option. If cookie length is negative, the SYN will not include any Fast Open option (for fall back operations). To deal with middleboxes that may drop SYN with data or experimental TCP option, the SYN-data is only sent once. SYN retransmits do not include data or Fast Open options. The connection will fall back to regular TCP handshake. Signed-off-by: Yuchung Cheng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/snmp.h | 1 + include/linux/tcp.h | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index e5fcbd079e4a..00bc189cb395 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -238,6 +238,7 @@ enum LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ + LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ __LINUX_MIB_MAX }; diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 12948f543839..1edf96afab44 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -386,7 +386,8 @@ struct tcp_sock { unused : 1; u8 repair_queue; u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ - early_retrans_delayed:1; /* Delayed ER timer installed */ + early_retrans_delayed:1, /* Delayed ER timer installed */ + syn_fastopen:1; /* SYN includes Fast Open option */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ @@ -500,6 +501,9 @@ struct tcp_sock { struct tcp_md5sig_info __rcu *md5sig_info; #endif +/* TCP fastopen related information */ + struct tcp_fastopen_request *fastopen_req; + /* When the cookie options are generated and exchanged, then this * object holds a reference to them (cookie_values->kref). Also * contains related tcp_cookie_transactions fields. -- cgit v1.2.3 From cf60af03ca4e71134206809ea892e49b92a88896 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 19 Jul 2012 06:43:09 +0000 Subject: net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN) sendmsg() (or sendto()) with MSG_FASTOPEN is a combo of connect(2) and write(2). The application should replace connect() with it to send data in the opening SYN packet. For blocking socket, sendmsg() blocks until all the data are buffered locally and the handshake is completed like connect() call. It returns similar errno like connect() if the TCP handshake fails. For non-blocking socket, it returns the number of bytes queued (and transmitted in the SYN-data packet) if cookie is available. If cookie is not available, it transmits a data-less SYN packet with Fast Open cookie request option and returns -EINPROGRESS like connect(). Using MSG_FASTOPEN on connecting or connected socket will result in simlar errno like repeating connect() calls. Therefore the application should only use this flag on new sockets. The buffer size of sendmsg() is independent of the MSS of the connection. Signed-off-by: Yuchung Cheng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/socket.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/socket.h b/include/linux/socket.h index 25d6322fb635..ba7b2e817cfa 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -268,6 +268,7 @@ struct ucred { #define MSG_SENDPAGE_NOTLAST 0x20000 /* sendpage() internal : not the last page */ #define MSG_EOF MSG_FIN +#define MSG_FASTOPEN 0x20000000 /* Send data in TCP SYN */ #define MSG_CMSG_CLOEXEC 0x40000000 /* Set close_on_exit for file descriptor received through SCM_RIGHTS */ -- cgit v1.2.3 From 67da22d23fa6f3324e03bcd0580b914b2e4afbf3 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 19 Jul 2012 06:43:11 +0000 Subject: net-tcp: Fast Open client - cookie-less mode In trusted networks, e.g., intranet, data-center, the client does not need to use Fast Open cookie to mitigate DoS attacks. In cookie-less mode, sendmsg() with MSG_FASTOPEN flag will send SYN-data regardless of cookie availability. Signed-off-by: Yuchung Cheng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/tcp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 1edf96afab44..9febfb685c33 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -387,6 +387,7 @@ struct tcp_sock { u8 repair_queue; u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ early_retrans_delayed:1, /* Delayed ER timer installed */ + syn_data:1, /* SYN includes data */ syn_fastopen:1; /* SYN includes Fast Open option */ /* RTT measurement */ -- cgit v1.2.3 From cef12ee52b054282461a6d5fe7742755fa6e3bd3 Mon Sep 17 00:00:00 2001 From: "Liu, Jinsong" Date: Thu, 7 Jun 2012 19:56:51 +0800 Subject: xen/mce: Add mcelog support for Xen platform When MCA error occurs, it would be handled by Xen hypervisor first, and then the error information would be sent to initial domain for logging. This patch gets error information from Xen hypervisor and convert Xen format error into Linux format mcelog. This logic is basically self-contained, not touching other kernel components. By using tools like mcelog tool users could read specific error information, like what they did under native Linux. To test follow directions outlined in Documentation/acpi/apei/einj.txt Acked-and-tested-by: Borislav Petkov Signed-off-by: Ke, Liping Signed-off-by: Jiang, Yunhong Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Liu, Jinsong Signed-off-by: Konrad Rzeszutek Wilk --- include/linux/miscdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 0549d2115507..e0deeb2cc939 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -35,6 +35,7 @@ #define MPT_MINOR 220 #define MPT2SAS_MINOR 221 #define UINPUT_MINOR 223 +#define MISC_MCELOG_MINOR 227 #define HPET_MINOR 228 #define FUSE_MINOR 229 #define KVM_MINOR 232 -- cgit v1.2.3 From 9f1612d351a8e57d3d694e828641d3e4eeb224f8 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 18 Jul 2012 11:52:22 +0800 Subject: clk: fix clk_get on of_clk_get_by_name return check The commit 766e6a4 (clk: add DT clock binding support) plugs device tree clk lookup of_clk_get_by_name into clk_get, and fall on non-DT lookup clk_get_sys if DT lookup fails. The return check on of_clk_get_by_name takes (clk != NULL) as a successful DT lookup. But it's not the case. For any system that does not define clk lookup in device tree, ERR_PTR(-ENOENT) will be returned, and consequently, all the client drivers calling clk_get in their probe functions will fail to probe with error code -ENOENT returned. Fix the issue by checking of_clk_get_by_name return with !IS_ERR(clk), and update of_clk_get and of_clk_get_by_name for !CONFIG_OF build correspondingly. Signed-off-by: Shawn Guo Acked-by: Rob Herring Tested-by: Marek Vasut Tested-by: Lauri Hintsala Signed-off-by: Mike Turquette --- include/linux/clk.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk.h b/include/linux/clk.h index 8b70342e7e0b..071e24083dc8 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -12,6 +12,7 @@ #ifndef __LINUX_CLK_H #define __LINUX_CLK_H +#include #include #include @@ -320,12 +321,12 @@ struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec); #else static inline struct clk *of_clk_get(struct device_node *np, int index) { - return NULL; + return ERR_PTR(-ENOENT); } static inline struct clk *of_clk_get_by_name(struct device_node *np, const char *name) { - return NULL; + return ERR_PTR(-ENOENT); } #endif -- cgit v1.2.3 From 137f8a7213d80c1388ca48280c1ef0856b6fec30 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 18 Jul 2012 11:52:23 +0800 Subject: clk: fix compile for OF && !COMMON_CLK With commit 766e6a4ec602d0c107 (clk: add DT clock binding support), compiling with OF && !COMMON_CLK is broken. Reported-by: Alexandre Pereira da Silva Reported-by: Prashant Gaikwad Signed-off-by: Rob Herring Signed-off-by: Mike Turquette --- include/linux/clk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/clk.h b/include/linux/clk.h index 071e24083dc8..6587b5280583 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -314,7 +314,7 @@ int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, struct device_node; struct of_phandle_args; -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) struct clk *of_clk_get(struct device_node *np, int index); struct clk *of_clk_get_by_name(struct device_node *np, const char *name); struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec); -- cgit v1.2.3 From cdcac9cd7741af2c2b9255cbf060f772596907bb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 27 Jun 2012 08:35:52 +0100 Subject: pci_regs: define LNKSTA2 pcie cap + bits. We need these for detecting the max link speed for drm drivers. Acked-by: Bjorn Helgaas Signed-off-by: Dave Airlie --- include/linux/pci_regs.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f543412..7f04132eb02d 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -521,6 +521,11 @@ #define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ #define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ #define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ -- cgit v1.2.3 From ecf90fbbdc66cde6f5fa25d88541112b9baac459 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 5 Jul 2012 12:29:40 +0200 Subject: dmaengine: shdma: prepare to stop using struct dma_chan::private Using struct dma_chan::private is deprecated. To update the shdma driver to stop using it we first have to eliminate internal runtime uses of it. After that we will also be able to stop using it for channel configuration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Vinod Koul --- include/linux/sh_dma.h | 2 -- include/linux/shdma-base.h | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 7c8ca41e60e6..a79f10a32243 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -20,8 +20,6 @@ struct device; /* Used by slave DMA clients to request DMA to/from a specific peripheral */ struct sh_dmae_slave { struct shdma_slave shdma_slave; /* Set by the platform */ - struct device *dma_dev; /* Set by the platform */ - const struct sh_dmae_slave_config *config; /* Set by the driver */ }; /* diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h index 83efd1332b39..c3a19e9c20c4 100644 --- a/include/linux/shdma-base.h +++ b/include/linux/shdma-base.h @@ -66,6 +66,7 @@ struct shdma_chan { size_t max_xfer_len; /* max transfer length */ int id; /* Raw id of this channel */ int irq; /* Channel IRQ */ + struct shdma_slave *slave; /* Client data for slave DMA */ enum shdma_pm_state pm_state; }; -- cgit v1.2.3 From c2cdb7e4d16394fc51dc5c2c5b3e7c3733bdfaac Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 5 Jul 2012 12:29:41 +0200 Subject: dma: sh: use an integer slave ID to improve API compatibility Initially struct shdma_slave has been introduced with the only member - an unsigned slave ID - to describe common properties of DMA slaves in an extensible way. However, experience shows, that a slave ID is indeed the only parameter, needed to identify DMA slaves. This is also, what is used by the core dmaengine API in struct dma_slave_config. We switch to using the slave_id directly, instead of passing a pointer to struct shdma_slave to improve compatibility with the core. We also make the slave_id signed for easier error checking. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Vinod Koul --- include/linux/sh_dma.h | 8 ++++---- include/linux/shdma-base.h | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index a79f10a32243..4e83f3e034f3 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -27,10 +27,10 @@ struct sh_dmae_slave { * a certain peripheral */ struct sh_dmae_slave_config { - unsigned int slave_id; - dma_addr_t addr; - u32 chcr; - char mid_rid; + int slave_id; + dma_addr_t addr; + u32 chcr; + char mid_rid; }; struct sh_dmae_channel { diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h index c3a19e9c20c4..6263ad2e7426 100644 --- a/include/linux/shdma-base.h +++ b/include/linux/shdma-base.h @@ -43,7 +43,7 @@ struct device; */ struct shdma_slave { - unsigned int slave_id; + int slave_id; }; struct shdma_desc { @@ -66,7 +66,7 @@ struct shdma_chan { size_t max_xfer_len; /* max transfer length */ int id; /* Raw id of this channel */ int irq; /* Channel IRQ */ - struct shdma_slave *slave; /* Client data for slave DMA */ + int slave_id; /* Client ID for slave DMA */ enum shdma_pm_state pm_state; }; @@ -93,8 +93,8 @@ struct shdma_ops { dma_addr_t (*slave_addr)(struct shdma_chan *); int (*desc_setup)(struct shdma_chan *, struct shdma_desc *, dma_addr_t, dma_addr_t, size_t *); - int (*set_slave)(struct shdma_chan *, struct shdma_slave *); - void (*setup_xfer)(struct shdma_chan *, struct shdma_slave *); + int (*set_slave)(struct shdma_chan *, int); + void (*setup_xfer)(struct shdma_chan *, int); void (*start_xfer)(struct shdma_chan *, struct shdma_desc *); struct shdma_desc *(*embedded_desc)(void *, int); bool (*chan_irq)(struct shdma_chan *, int); -- cgit v1.2.3 From 1ff8df4f5388ad66bd7d0199b5839a2e3345c055 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 5 Jul 2012 12:29:42 +0200 Subject: dma: sh: provide a migration path for slave drivers to stop using .private This patch extends the sh dmaengine driver to support the preferred channel selection and configuration method, instead of using the "private" field from struct dma_chan. We add a standard filter function to be used by slave drivers instead of implementing their own ones, and add support for the DMA_SLAVE_CONFIG control operation, which must accompany the new channel selection method. We still support the legacy .private channel allocation method to cater for a smooth driver migration. Signed-off-by: Guennadi Liakhovetski [applied a trvial checkpath fix] Signed-off-by: Vinod Koul --- include/linux/sh_dma.h | 2 ++ include/linux/shdma-base.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 4e83f3e034f3..b64d6bec6f90 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -99,4 +99,6 @@ struct sh_dmae_pdata { #define CHCR_TE 0x00000002 #define CHCR_IE 0x00000004 +bool shdma_chan_filter(struct dma_chan *chan, void *arg); + #endif diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h index 6263ad2e7426..93f9821554b6 100644 --- a/include/linux/shdma-base.h +++ b/include/linux/shdma-base.h @@ -93,7 +93,7 @@ struct shdma_ops { dma_addr_t (*slave_addr)(struct shdma_chan *); int (*desc_setup)(struct shdma_chan *, struct shdma_desc *, dma_addr_t, dma_addr_t, size_t *); - int (*set_slave)(struct shdma_chan *, int); + int (*set_slave)(struct shdma_chan *, int, bool); void (*setup_xfer)(struct shdma_chan *, int); void (*start_xfer)(struct shdma_chan *, struct shdma_desc *); struct shdma_desc *(*embedded_desc)(void *, int); -- cgit v1.2.3 From e4a9c3732cea3e3c8c704aad86636090ffe6b25f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 21 Jun 2012 23:25:27 -0700 Subject: [SCSI] libata, libsas: introduce sched_eh and end_eh port ops When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki Acked-by: Jeff Garzik Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- include/linux/libata.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6e887c742a27..53da442f892d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -846,6 +846,8 @@ struct ata_port_operations { void (*error_handler)(struct ata_port *ap); void (*lost_interrupt)(struct ata_port *ap); void (*post_internal_cmd)(struct ata_queued_cmd *qc); + void (*sched_eh)(struct ata_port *ap); + void (*end_eh)(struct ata_port *ap); /* * Optional features @@ -1167,6 +1169,8 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); extern void ata_std_error_handler(struct ata_port *ap); +extern void ata_std_sched_eh(struct ata_port *ap); +extern void ata_std_end_eh(struct ata_port *ap); extern int ata_link_nr_enabled(struct ata_link *link); /* -- cgit v1.2.3 From 365a7150094114a0f8ef0b6164e6b04b519039e8 Mon Sep 17 00:00:00 2001 From: Cong Meng Date: Thu, 5 Jul 2012 17:06:43 +0800 Subject: [SCSI] virtio-scsi: hotplug support for virtio-scsi This patch implements the hotplug support for virtio-scsi. When there is a device attached/detached, the virtio-scsi driver will be signaled via event virtual queue and it will add/remove the scsi device in question automatically. Signed-off-by: Sen Wang Signed-off-by: Cong Meng Acked-by: Paolo Bonzini Signed-off-by: James Bottomley --- include/linux/virtio_scsi.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h index 8ddeafdc0546..dc8d305b0e05 100644 --- a/include/linux/virtio_scsi.h +++ b/include/linux/virtio_scsi.h @@ -69,6 +69,10 @@ struct virtio_scsi_config { u32 max_lun; } __packed; +/* Feature Bits */ +#define VIRTIO_SCSI_F_INOUT 0 +#define VIRTIO_SCSI_F_HOTPLUG 1 + /* Response codes */ #define VIRTIO_SCSI_S_OK 0 #define VIRTIO_SCSI_S_OVERRUN 1 @@ -105,6 +109,11 @@ struct virtio_scsi_config { #define VIRTIO_SCSI_T_TRANSPORT_RESET 1 #define VIRTIO_SCSI_T_ASYNC_NOTIFY 2 +/* Reasons of transport reset event */ +#define VIRTIO_SCSI_EVT_RESET_HARD 0 +#define VIRTIO_SCSI_EVT_RESET_RESCAN 1 +#define VIRTIO_SCSI_EVT_RESET_REMOVED 2 + #define VIRTIO_SCSI_S_SIMPLE 0 #define VIRTIO_SCSI_S_ORDERED 1 #define VIRTIO_SCSI_S_HEAD 2 -- cgit v1.2.3 From eaa05dfcdb12cf3a7bedf8918dc8699c00944384 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 7 Jul 2012 23:05:28 -0400 Subject: [SCSI] usb-storage: add support for write cache quirk Add support for write cache quirk on usb hdd. scsi driver will be set to wce by detecting write cache quirk in quirk list when plugging usb hdd. Signed-off-by: Namjae Jeon Signed-off-by: Pankaj Kumar Signed-off-by: Amit Sahrawat Acked-by: Alan Stern Signed-off-by: James Bottomley --- include/linux/usb_usual.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 17df3600bcef..e84e769aaddc 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -64,7 +64,9 @@ US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \ /* cannot handle READ_CAPACITY_16 */ \ US_FLAG(INITIAL_READ10, 0x00100000) \ - /* Initial READ(10) (and others) must be retried */ + /* Initial READ(10) (and others) must be retried */ \ + US_FLAG(WRITE_CACHE, 0x00200000) \ + /* Write Cache status is not available */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.2.3 From 59057fbc37178f10a196ab7ec170b80273f75a47 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 11 Jul 2012 21:22:16 +0000 Subject: [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning This patch changes virtio-scsi to use a new virtio_driver->scan() callback so that scsi_scan_host() can be properly invoked once virtio_dev_probe() has set add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK) to signal active virtio-ring operation, instead of from within virtscsi_probe(). This fixes a bug where SCSI LUN scanning for both virtio-scsi-raw and virtio-scsi/tcm_vhost setups was happening before VIRTIO_CONFIG_S_DRIVER_OK had been set, causing VIRTIO_SCSI_S_BAD_TARGET to occur. This fixes a bug with virtio-scsi/tcm_vhost where LUN scan was not detecting LUNs. Tested with virtio-scsi-raw + virtio-scsi/tcm_vhost w/ IBLOCK on 3.5-rc2 code. Signed-off-by: Nicholas Bellinger Acked-by: Paolo Bonzini Signed-off-by: James Bottomley --- include/linux/virtio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 8efd28ae5597..a1ba8bbd9fbe 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -92,6 +92,7 @@ struct virtio_driver { const unsigned int *feature_table; unsigned int feature_table_size; int (*probe)(struct virtio_device *dev); + void (*scan)(struct virtio_device *dev); void (*remove)(struct virtio_device *dev); void (*config_changed)(struct virtio_device *dev); #ifdef CONFIG_PM -- cgit v1.2.3 From 2955b47d2c1983998a8c5915cb96884e67f7cb53 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 9 Jul 2012 19:33:25 -0700 Subject: [SCSI] async: introduce 'async_domain' type This is in preparation for teaching async_synchronize_full() to sync all pending async work, and not just on the async_running domain. This conversion is functionally equivalent, just embedding the existing list in a new async_domain type. The .registered attribute is used in a later patch to distinguish between domains that want to be flushed by async_synchronize_full() versus those that only expect async_synchronize_{full|cookie}_domain to be used for flushing. [jejb: add async.h to scsi_priv.h for struct async_domain] Signed-off-by: Dan Williams Acked-by: Arjan van de Ven Acked-by: Mark Brown Tested-by: Eldad Zack Signed-off-by: James Bottomley --- include/linux/async.h | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/async.h b/include/linux/async.h index 68a9530196f2..364e7ff16c08 100644 --- a/include/linux/async.h +++ b/include/linux/async.h @@ -9,19 +9,46 @@ * as published by the Free Software Foundation; version 2 * of the License. */ +#ifndef __ASYNC_H__ +#define __ASYNC_H__ #include #include typedef u64 async_cookie_t; typedef void (async_func_ptr) (void *data, async_cookie_t cookie); +struct async_domain { + struct list_head node; + struct list_head domain; + int count; + unsigned registered:1; +}; + +/* + * domain participates in global async_synchronize_full + */ +#define ASYNC_DOMAIN(_name) \ + struct async_domain _name = { .node = LIST_HEAD_INIT(_name.node), \ + .domain = LIST_HEAD_INIT(_name.domain), \ + .count = 0, \ + .registered = 1 } + +/* + * domain is free to go out of scope as soon as all pending work is + * complete, this domain does not participate in async_synchronize_full + */ +#define ASYNC_DOMAIN_EXCLUSIVE(_name) \ + struct async_domain _name = { .node = LIST_HEAD_INIT(_name.node), \ + .domain = LIST_HEAD_INIT(_name.domain), \ + .count = 0, \ + .registered = 0 } extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data); extern async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data, - struct list_head *list); + struct async_domain *domain); extern void async_synchronize_full(void); -extern void async_synchronize_full_domain(struct list_head *list); +extern void async_synchronize_full_domain(struct async_domain *domain); extern void async_synchronize_cookie(async_cookie_t cookie); extern void async_synchronize_cookie_domain(async_cookie_t cookie, - struct list_head *list); - + struct async_domain *domain); +#endif -- cgit v1.2.3 From a4683487f90bfe3049686fc5c566bdc1ad03ace6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 9 Jul 2012 19:33:30 -0700 Subject: [SCSI] async: make async_synchronize_full() flush all work regardless of domain In response to an async related regression James noted: "My theory is that this is an init problem: The assumption in a lot of our code is that async_synchronize_full() waits for everything ... even the domain specific async schedules, which isn't true." ...so make this assumption true. Each domain, including the default one, registers itself on a global domain list when work is scheduled. Once all entries complete it exits that list. Waiting for the list to be empty syncs all in-flight work across all domains. Domains can opt-out of global syncing if they are declared as exclusive ASYNC_DOMAIN_EXCLUSIVE(). All stack-based domains have been declared exclusive since the domain may go out of scope as soon as the last work item completes. Statically declared domains are mostly ok, but async_unregister_domain() is there to close any theoretical races with pending async_synchronize_full waiters at module removal time. Signed-off-by: Dan Williams Acked-by: Arjan van de Ven Reported-by: Meelis Roos Reported-by: Eldad Zack Tested-by: Eldad Zack Signed-off-by: James Bottomley --- include/linux/async.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/async.h b/include/linux/async.h index 364e7ff16c08..7a24fe9b44b4 100644 --- a/include/linux/async.h +++ b/include/linux/async.h @@ -46,6 +46,7 @@ struct async_domain { extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data); extern async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data, struct async_domain *domain); +void async_unregister_domain(struct async_domain *domain); extern void async_synchronize_full(void); extern void async_synchronize_full_domain(struct async_domain *domain); extern void async_synchronize_cookie(async_cookie_t cookie); -- cgit v1.2.3 From 194b9a4cb91713ddb60c9f98f7212f6d8cb8e05f Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 16 Jul 2012 12:58:31 +0200 Subject: can: mark bittiming_const pointer in struct can_priv as const This patch marks the bittiming_const pointer as in the struct can_pric as "const". This allows us to mark the struct can_bittiming_const in the CAN drivers as "const", too. Signed-off-by: Marc Kleine-Budde --- include/linux/can/dev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index ee5a771fb20d..2b2fc345afca 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -33,7 +33,7 @@ struct can_priv { struct can_device_stats can_stats; struct can_bittiming bittiming; - struct can_bittiming_const *bittiming_const; + const struct can_bittiming_const *bittiming_const; struct can_clock clock; enum can_state state; -- cgit v1.2.3 From 6f458dfb409272082c9bfa412f77ff2fc21c626f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 20 Jul 2012 05:45:50 +0000 Subject: tcp: improve latencies of timer triggered events Modern TCP stack highly depends on tcp_write_timer() having a small latency, but current implementation doesn't exactly meet the expectations. When a timer fires but finds the socket is owned by the user, it rearms itself for an additional delay hoping next run will be more successful. tcp_write_timer() for example uses a 50ms delay for next try, and it defeats many attempts to get predictable TCP behavior in term of latencies. Use the recently introduced tcp_release_cb(), so that the user owning the socket will call various handlers right before socket release. This will permit us to post a followup patch to address the tcp_tso_should_defer() syndrome (some deferred packets have to wait RTO timer to be transmitted, while cwnd should allow us to send them sooner) Signed-off-by: Eric Dumazet Cc: Tom Herbert Cc: Yuchung Cheng Cc: Neal Cardwell Cc: Nandita Dukkipati Cc: H.K. Jerry Chu Cc: John Heffner Signed-off-by: David S. Miller --- include/linux/tcp.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 9febfb685c33..2761856987b2 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -515,7 +515,9 @@ struct tcp_sock { enum tsq_flags { TSQ_THROTTLED, TSQ_QUEUED, - TSQ_OWNED, /* tcp_tasklet_func() found socket was locked */ + TCP_TSQ_DEFERRED, /* tcp_tasklet_func() found socket was owned */ + TCP_WRITE_TIMER_DEFERRED, /* tcp_write_timer() found socket was owned */ + TCP_DELACK_TIMER_DEFERRED, /* tcp_delack_timer() found socket was owned */ }; static inline struct tcp_sock *tcp_sk(const struct sock *sk) -- cgit v1.2.3 From ee6ae1a1d58c70fc864bc777a36be56b0880ebff Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 20 Jul 2012 02:28:46 +0000 Subject: net: honour netif_set_real_num_tx_queues() retval In netif_copy_real_num_queues() the return value of netif_set_real_num_tx_queues() should be checked. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/netdevice.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ab0251d541ab..eb06e58bed0b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2110,7 +2110,12 @@ static inline int netif_set_real_num_rx_queues(struct net_device *dev, static inline int netif_copy_real_num_queues(struct net_device *to_dev, const struct net_device *from_dev) { - netif_set_real_num_tx_queues(to_dev, from_dev->real_num_tx_queues); + int err; + + err = netif_set_real_num_tx_queues(to_dev, + from_dev->real_num_tx_queues); + if (err) + return err; #ifdef CONFIG_RPS return netif_set_real_num_rx_queues(to_dev, from_dev->real_num_rx_queues); -- cgit v1.2.3 From 76ff5cc91935c51fcf1a6a99ffa28b97a6e7a884 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 20 Jul 2012 02:28:48 +0000 Subject: rtnl: allow to specify number of rx and tx queues on device creation This patch introduces IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES by which userspace can set number of rx and/or tx queues to be allocated for newly created netdevice. This overrides ops->get_num_[tr]x_queues() Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_link.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_link.h b/include/linux/if_link.h index f715750d0b87..ac173bd2ab65 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -140,6 +140,8 @@ enum { IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ #define IFLA_PROMISCUITY IFLA_PROMISCUITY + IFLA_NUM_TX_QUEUES, + IFLA_NUM_RX_QUEUES, __IFLA_MAX }; -- cgit v1.2.3 From 6c85f2bdda2086d804e198a3f31b685bc2f86b04 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 20 Jul 2012 02:28:51 +0000 Subject: team: add multiqueue support Largely copied from bonding code. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 7fd0cdeb9444..6960fc1841a7 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ #include +#include struct team_pcpu_stats { u64 rx_packets; @@ -98,6 +99,10 @@ static inline void team_netpoll_send_skb(struct team_port *port, static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, struct sk_buff *skb) { + BUILD_BUG_ON(sizeof(skb->queue_mapping) != + sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); + skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); + skb->dev = port->dev; if (unlikely(netpoll_tx_running(port->dev))) { team_netpoll_send_skb(port, skb); @@ -236,6 +241,9 @@ extern void team_options_unregister(struct team *team, extern int team_mode_register(const struct team_mode *mode); extern void team_mode_unregister(const struct team_mode *mode); +#define TEAM_DEFAULT_NUM_TX_QUEUES 16 +#define TEAM_DEFAULT_NUM_RX_QUEUES 16 + #endif /* __KERNEL__ */ #define TEAM_STRING_MAX_LEN 32 -- cgit v1.2.3 From b09e786bd1dd66418b69348cb110f3a64764626a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 19 Jul 2012 06:13:36 +0000 Subject: tun: fix a crash bug and a memory leak This patch fixes a crash tun_chr_close -> netdev_run_todo -> tun_free_netdev -> sk_release_kernel -> sock_release -> iput(SOCK_INODE(sock)) introduced by commit 1ab5ecb90cb6a3df1476e052f76a6e8f6511cb3d The problem is that this socket is embedded in struct tun_struct, it has no inode, iput is called on invalid inode, which modifies invalid memory and optionally causes a crash. sock_release also decrements sockets_in_use, this causes a bug that "sockets: used" field in /proc/*/net/sockstat keeps on decreasing when creating and closing tun devices. This patch introduces a flag SOCK_EXTERNALLY_ALLOCATED that instructs sock_release to not free the inode and not decrement sockets_in_use, fixing both memory corruption and sockets_in_use underflow. It should be backported to 3.3 an 3.4 stabke. Signed-off-by: Mikulas Patocka Cc: stable@kernel.org Signed-off-by: David S. Miller --- include/linux/net.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/net.h b/include/linux/net.h index e9ac2df079ba..dc95700de5df 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -72,6 +72,7 @@ struct net; #define SOCK_NOSPACE 2 #define SOCK_PASSCRED 3 #define SOCK_PASSSEC 4 +#define SOCK_EXTERNALLY_ALLOCATED 5 #ifndef ARCH_HAS_SOCKET_TYPES /** -- cgit v1.2.3 From e137788dd115dd9d21759a768dba5fff9685e587 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 20 Jun 2012 02:28:43 -0400 Subject: mmc: add a function to get regulators, supplying card's power Add a function to get regulators, supplying card's Vdd and Vccq on a specific host. If a Vdd supplying regulator is found, the function checks, whether a valid OCR mask can be obtained from it. The Vccq regulator is optional. A failure to get it is not fatal. Signed-off-by: Guennadi Liakhovetski Reviwed-by: Mark Brown Acked-by: Ulf Hansson Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0707d228d7f1..9deb725799e7 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -155,6 +155,13 @@ struct mmc_hotplug { void *handler_priv; }; +struct regulator; + +struct mmc_supply { + struct regulator *vmmc; /* Card power supply */ + struct regulator *vqmmc; /* Optional Vccq supply */ +}; + struct mmc_host { struct device *parent; struct device class_dev; @@ -309,6 +316,7 @@ struct mmc_host { #ifdef CONFIG_REGULATOR bool regulator_enabled; /* regulator state */ #endif + struct mmc_supply supply; struct dentry *debugfs_root; @@ -357,13 +365,12 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host) wake_up_process(host->sdio_irq_thread); } -struct regulator; - #ifdef CONFIG_REGULATOR int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit); +int mmc_regulator_get_supply(struct mmc_host *mmc); #else static inline int mmc_regulator_get_ocrmask(struct regulator *supply) { @@ -376,6 +383,11 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc, { return 0; } + +static inline int mmc_regulator_get_supply(struct mmc_host *mmc) +{ + return 0; +} #endif int mmc_card_awake(struct mmc_host *host); -- cgit v1.2.3 From 8c102a964655b1a8df41b1f9e2355657471a45e3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 20 Jun 2012 19:10:31 +0200 Subject: mmc: tmio: add callbacks to enable-update and disable the interface clock Every time the clock is enabled after possibly being disabled, we have to re-read its frequency and update our configuration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mfd/tmio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index f5171dbf8850..b332c4c7857b 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -110,6 +110,9 @@ struct tmio_mmc_data { void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); int (*write16_hook)(struct tmio_mmc_host *host, int addr); + /* clock management callbacks */ + int (*clk_enable)(struct platform_device *pdev, unsigned int *f); + void (*clk_disable)(struct platform_device *pdev); }; /* -- cgit v1.2.3 From 27410ee7e391ce650d6d0242805f080599be7ad7 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 1 May 2012 15:40:15 +0200 Subject: mmc: core: use a more generic name for slot function types and fields struct mmc_host::hotplug is becoming a generic hook for slot functions. Rename it accordingly. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 9deb725799e7..90b6a38b0374 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -150,8 +150,19 @@ struct mmc_async_req { int (*err_check) (struct mmc_card *, struct mmc_async_req *); }; -struct mmc_hotplug { - unsigned int irq; +/** + * struct mmc_slot - MMC slot functions + * + * @cd_irq: MMC/SD-card slot hotplug detection IRQ or -EINVAL + * @handler_priv: MMC/SD-card slot context + * + * Some MMC/SD host controllers implement slot-functions like card and + * write-protect detection natively. However, a large number of controllers + * leave these functions to the CPU. This struct provides a hook to attach + * such slot-function drivers. + */ +struct mmc_slot { + int cd_irq; void *handler_priv; }; @@ -297,7 +308,7 @@ struct mmc_host { struct delayed_work detect; int detect_change; /* card detect flag */ - struct mmc_hotplug hotplug; + struct mmc_slot slot; const struct mmc_bus_ops *bus_ops; /* current bus driver */ unsigned int bus_refs; /* reference counter */ -- cgit v1.2.3 From 5c08d7fae0815cd163a98e05c8d94fc0de77ff67 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 1 May 2012 15:49:52 +0200 Subject: mmc: add two capability flags for CD and WP signal polarity To handle CD and WP SD/MMC slot pins we need generic flags to specify their polarity. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 90b6a38b0374..c1a03eed1d17 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -256,6 +256,8 @@ struct mmc_host { #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ #define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */ #define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ +#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ +#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3 From befe4048d8d20483a62636e20f3dbffebf85a1c1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 1 May 2012 16:27:25 +0200 Subject: mmc: add CD GPIO polling support to slot functions A simple extension of mmc slot functions add support for CD GPIO polling for cases where the GPIO cannot produce interrupts, or where this is not desired for some reason. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/slot-gpio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index edfaa3254373..1a977d7ba3ba 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -12,6 +12,8 @@ #define MMC_SLOT_GPIO_H struct mmc_host; + +int mmc_gpio_get_cd(struct mmc_host *host); int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio); void mmc_gpio_free_cd(struct mmc_host *host); -- cgit v1.2.3 From a7d1a1ebd8f5858a812ac3d5fbbc178b4959a63b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 1 May 2012 16:51:38 +0200 Subject: mmc: core: convert slot functions to managed allocation This prepares for the addition of further slot functions. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index c1a03eed1d17..65c64ee578a7 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -11,6 +11,7 @@ #define LINUX_MMC_HOST_H #include +#include #include #include #include @@ -154,6 +155,7 @@ struct mmc_async_req { * struct mmc_slot - MMC slot functions * * @cd_irq: MMC/SD-card slot hotplug detection IRQ or -EINVAL + * @lock: protect the @handler_priv pointer * @handler_priv: MMC/SD-card slot context * * Some MMC/SD host controllers implement slot-functions like card and @@ -163,6 +165,7 @@ struct mmc_async_req { */ struct mmc_slot { int cd_irq; + struct mutex lock; void *handler_priv; }; -- cgit v1.2.3 From 5aa7dad305594ea30d21e23b3036565042adf50c Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 1 May 2012 16:59:38 +0200 Subject: mmc: core: add WP pin handler to slot functions Card Write-Protect pin is often implemented, using a GPIO, which makes it simple to provide a generic handler for it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/slot-gpio.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index 1a977d7ba3ba..7d88d27bfafa 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -13,6 +13,10 @@ struct mmc_host; +int mmc_gpio_get_ro(struct mmc_host *host); +int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio); +void mmc_gpio_free_ro(struct mmc_host *host); + int mmc_gpio_get_cd(struct mmc_host *host); int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio); void mmc_gpio_free_cd(struct mmc_host *host); -- cgit v1.2.3 From 02cb3221d5bb351ad9f7469453dcca7594a0fabf Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 23 May 2012 10:44:37 +0200 Subject: mmc: tmio: support caps2 flags Allow tmio mmc glue drivers to pass mmc_host::caps2 flags down to the mmc layer. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mfd/tmio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index b332c4c7857b..d83af39815ab 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -101,6 +101,7 @@ struct tmio_mmc_host; struct tmio_mmc_data { unsigned int hclk; unsigned long capabilities; + unsigned long capabilities2; unsigned long flags; u32 ocr_mask; /* available voltages */ struct tmio_mmc_dma *dma; -- cgit v1.2.3 From d7d8d500bc03891c4a86da49858c46e2db256581 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 23 May 2012 11:05:33 +0200 Subject: mmc: sh_mobile_sdhi: support caps2 flags Let SDHI platforms specify mmc_host::caps2 flags in their platform data. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/sh_mobile_sdhi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index e94e620aeddc..b65679ffa880 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -23,6 +23,7 @@ struct sh_mobile_sdhi_info { int dma_slave_rx; unsigned long tmio_flags; unsigned long tmio_caps; + unsigned long tmio_caps2; u32 tmio_ocr_mask; /* available MMC voltages */ unsigned int cd_gpio; struct tmio_mmc_data *pdata; -- cgit v1.2.3 From e480606ad43bb72fd82a9bd99cdcf21829a6e9c0 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 14 Jun 2012 14:24:35 +0200 Subject: mmc: sh_mmcif: support generic card-detection Extend the sh_mmcif driver to support GPIO card detection, provided by the slot function module. The original .get_cd() platform callback is also preserved for now. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/sh_mmcif.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 05f0e3db1c12..c2f73cbb4d5c 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -44,6 +44,8 @@ struct sh_mmcif_plat_data { struct sh_mmcif_dma *dma; /* Deprecated. Instead */ unsigned int slave_id_tx; /* use embedded slave_id_[tr]x */ unsigned int slave_id_rx; + bool use_cd_gpio : 1; + unsigned int cd_gpio; u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ unsigned long caps; u32 ocr; -- cgit v1.2.3 From 0aa6770000bafa65c17cf44b6619d328d4fc79b3 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Sun, 27 May 2012 18:36:33 -0700 Subject: mmc: sdhci: only set 200mA support for 1.8v if 200mA is available max_current_caps can return 0 if not available from the sd controller. If no regulator is present or the regulator specifies a current less then 200ma, we no longer still set the 200mA caps bit anyway. Signed-off-by: Philip Rakity Reviewed-by: Aaron Lu Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index d76513b5b263..111aca5e97f3 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -149,6 +149,7 @@ struct sd_switch_caps { #define SD_SET_CURRENT_LIMIT_400 1 #define SD_SET_CURRENT_LIMIT_600 2 #define SD_SET_CURRENT_LIMIT_800 3 +#define SD_SET_CURRENT_NO_CHANGE (-1) #define SD_MAX_CURRENT_200 (1 << SD_SET_CURRENT_LIMIT_200) #define SD_MAX_CURRENT_400 (1 << SD_SET_CURRENT_LIMIT_400) -- cgit v1.2.3 From 533827c921c34310f63e859e1d6d0feec439657d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 20 Jul 2012 17:28:07 -0700 Subject: printk: Implement some unlocked kmsg_dump functions If used from KDB, the locked variants are prone to deadlocks (suppose we got to the debugger w/ the logbuf lock held). So, we have to implement a few routines that grab no logbuf lock. Yet we don't need these functions in modules, so we don't export them. Signed-off-by: Anton Vorontsov Signed-off-by: Linus Torvalds --- include/linux/kmsg_dump.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h index d6bd50110ec2..2e7a1e032c71 100644 --- a/include/linux/kmsg_dump.h +++ b/include/linux/kmsg_dump.h @@ -55,12 +55,17 @@ struct kmsg_dumper { #ifdef CONFIG_PRINTK void kmsg_dump(enum kmsg_dump_reason reason); +bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog, + char *line, size_t size, size_t *len); + bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, char *line, size_t size, size_t *len); bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, char *buf, size_t size, size_t *len); +void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper); + void kmsg_dump_rewind(struct kmsg_dumper *dumper); int kmsg_dump_register(struct kmsg_dumper *dumper); @@ -71,6 +76,13 @@ static inline void kmsg_dump(enum kmsg_dump_reason reason) { } +static inline bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, + bool syslog, const char *line, + size_t size, size_t *len) +{ + return false; +} + static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, const char *line, size_t size, size_t *len) { @@ -83,6 +95,10 @@ static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, return false; } +static inline void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper) +{ +} + static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper) { } -- cgit v1.2.3 From bff9d1865640dcb4d9711dcc50714e9a8b859453 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 21 Jul 2012 20:24:52 +0200 Subject: Remove SYSTEM_SUSPEND_DISK system state The SYSTEM_SUSPEND_DISK system state is never used, so drop it. Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e07f5e0c5df4..604382143bcf 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -377,7 +377,6 @@ extern enum system_states { SYSTEM_HALT, SYSTEM_POWER_OFF, SYSTEM_RESTART, - SYSTEM_SUSPEND_DISK, } system_state; #define TAINT_PROPRIETARY_MODULE 0 -- cgit v1.2.3 From 46f3d976213452350f9d10b0c2780c2681f7075b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 19 Jul 2012 13:52:53 -0700 Subject: kthread_worker: reimplement flush_kthread_work() to allow freeing the work item being executed kthread_worker provides minimalistic workqueue-like interface for users which need a dedicated worker thread (e.g. for realtime priority). It has basic queue, flush_work, flush_worker operations which mostly match the workqueue counterparts; however, due to the way flush_work() is implemented, it has a noticeable difference of not allowing work items to be freed while being executed. While the current users of kthread_worker are okay with the current behavior, the restriction does impede some valid use cases. Also, removing this difference isn't difficult and actually makes the code easier to understand. This patch reimplements flush_kthread_work() such that it uses a flush_work item instead of queue/done sequence numbers. Signed-off-by: Tejun Heo --- include/linux/kthread.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kthread.h b/include/linux/kthread.h index 0714b24c0e45..22ccf9dee177 100644 --- a/include/linux/kthread.h +++ b/include/linux/kthread.h @@ -49,8 +49,6 @@ extern int tsk_fork_get_node(struct task_struct *tsk); * can be queued and flushed using queue/flush_kthread_work() * respectively. Queued kthread_works are processed by a kthread * running kthread_worker_fn(). - * - * A kthread_work can't be freed while it is executing. */ struct kthread_work; typedef void (*kthread_work_func_t)(struct kthread_work *work); @@ -59,15 +57,14 @@ struct kthread_worker { spinlock_t lock; struct list_head work_list; struct task_struct *task; + struct kthread_work *current_work; }; struct kthread_work { struct list_head node; kthread_work_func_t func; wait_queue_head_t done; - atomic_t flushing; - int queue_seq; - int done_seq; + struct kthread_worker *worker; }; #define KTHREAD_WORKER_INIT(worker) { \ @@ -79,7 +76,6 @@ struct kthread_work { .node = LIST_HEAD_INIT((work).node), \ .func = (fn), \ .done = __WAIT_QUEUE_HEAD_INITIALIZER((work).done), \ - .flushing = ATOMIC_INIT(0), \ } #define DEFINE_KTHREAD_WORKER(worker) \ -- cgit v1.2.3 From bd6a8c30faf19b4e7abace93fb89efd6d72607ec Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Wed, 27 Jun 2012 21:49:27 -0700 Subject: mmc: sdhci: Allow caps[1] to be set via SDHCI_QUIRK_MISSING_CAPS Currently only the capability_0 register can be set if SDHCI_QUIRK_MISSING_CAPS is defined. This is a problem when the capability_1 register also needs changing. Use the quirk SDHCI_QUIRK_MISSING_CAPS to allow both registers to be set. Redefining caps[1] is useful when the board design does not support 1.8v vccq so UHS modes are not available. The code that calls sdhci_add_host can then detect this condition and adjust the caps so the UHS mode will not be attempted on UHS cards. Signed-off-by: Philip Rakity Signed-off-by: Chris Ball --- include/linux/mmc/sdhci.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index e9051e1cb1ce..d989b511c9ab 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -155,7 +155,8 @@ struct sdhci_host { struct timer_list timer; /* Timer for timeouts */ - unsigned int caps; /* Alternative capabilities */ + unsigned int caps; /* Alternative CAPABILITY_0 */ + unsigned int caps1; /* Alternative CAPABILITY_1 */ unsigned int ocr_avail_sdio; /* OCR bit masks */ unsigned int ocr_avail_sd; -- cgit v1.2.3 From 973905feab85416784f36cc94b868392fd465ef4 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Wed, 4 Jul 2012 13:29:09 +0800 Subject: mmc: sdhci: Introduce new flag SDHCI_USING_RETUNING_TIMER Add a new flag of SDHCI_USING_RETUNING_TIMER to represent if the host is using a retuning timer for the card inserted. This flag is set when the host does tuning the first time for the card and the host's retuning mode is 1. This flag is used afterwards whenever needs to decide if the host is currently using a retuning timer. This flag is cleared when the card is removed in sdhci_reinit. The set/clear of the flag and the start/stop of the retuning timer is associated with the card's init/remove time, so there is no need to touch it when the host is to be removed as at that time the card should have already been removed. Signed-off-by: Aaron Lu Reviewed-by: Girish K S Reviewed-by: Philip Rakity Signed-off-by: Chris Ball --- include/linux/mmc/sdhci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index d989b511c9ab..ac83b105bedd 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -122,6 +122,7 @@ struct sdhci_host { #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ #define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */ +#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ unsigned int version; /* SDHCI spec. version */ -- cgit v1.2.3 From 55c4665ea0a42fd6427826bfce96eb4b0389262a Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Wed, 4 Jul 2012 13:31:48 +0800 Subject: mmc: sd: Fix sd current limit setting Host has different current capabilities at different voltages, we need to record these settings seperately. The defined voltages are 1.8/3.0/3.3. For other voltages, we do not touch current limit setting. Before we set the current limit for the sd card, find out the host's operating voltage first and then find out the current capabilities of the host at that voltage to set the current limit. Signed-off-by: Aaron Lu Reviewed-by: Philip Rakity Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 65c64ee578a7..f578a71d82a6 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -189,6 +189,9 @@ struct mmc_host { u32 ocr_avail_sd; /* SD-specific OCR */ u32 ocr_avail_mmc; /* MMC-specific OCR */ struct notifier_block pm_notify; + u32 max_current_330; + u32 max_current_300; + u32 max_current_180; #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ @@ -232,16 +235,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */ -#define MMC_CAP_SET_XPC_330 (1 << 20) /* Host supports >150mA current at 3.3V */ -#define MMC_CAP_SET_XPC_300 (1 << 21) /* Host supports >150mA current at 3.0V */ -#define MMC_CAP_SET_XPC_180 (1 << 22) /* Host supports >150mA current at 1.8V */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ #define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */ -#define MMC_CAP_MAX_CURRENT_200 (1 << 26) /* Host max current limit is 200mA */ -#define MMC_CAP_MAX_CURRENT_400 (1 << 27) /* Host max current limit is 400mA */ -#define MMC_CAP_MAX_CURRENT_600 (1 << 28) /* Host max current limit is 600mA */ -#define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */ #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ #define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ -- cgit v1.2.3 From a353e0ce0fd42d8859260666d1e9b10f2abd4698 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 Jul 2012 09:23:07 +0000 Subject: skbuff: add an api to orphan frags Many places do if ((skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY)) skb_copy_ubufs(skb, gfp_mask); to copy and invoke frag destructors if necessary. Add an inline helper for this. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/linux/skbuff.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 642cb7355df3..d205c4be7f5b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1666,6 +1666,22 @@ static inline void skb_orphan(struct sk_buff *skb) skb->sk = NULL; } +/** + * skb_orphan_frags - orphan the frags contained in a buffer + * @skb: buffer to orphan frags from + * @gfp_mask: allocation mask for replacement pages + * + * For each frag in the SKB which needs a destructor (i.e. has an + * owner) create a copy of that frag and release the original + * page by calling the destructor. + */ +static inline int skb_orphan_frags(struct sk_buff *skb, gfp_t gfp_mask) +{ + if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY))) + return 0; + return skb_copy_ubufs(skb, gfp_mask); +} + /** * __skb_queue_purge - empty a list * @list: list to empty -- cgit v1.2.3 From 406a3c638ce8b17d9704052c07955490f732c2b8 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 20 Jul 2012 10:39:25 +0000 Subject: net: netprio_cgroup: rework update socket logic Instead of updating the sk_cgrp_prioidx struct field on every send this only updates the field when a task is moved via cgroup infrastructure. This allows sockets that may be used by a kernel worker thread to be managed. For example in the iscsi case today a user can put iscsid in a netprio cgroup and control traffic will be sent with the correct sk_cgrp_prioidx value set but as soon as data is sent the kernel worker thread isssues a send and sk_cgrp_prioidx is updated with the kernel worker threads value which is the default case. It seems more correct to only update the field when the user explicitly sets it via control group infrastructure. This allows the users to manage sockets that may be used with other threads. Signed-off-by: John Fastabend Acked-by: Neil Horman Signed-off-by: David S. Miller --- include/linux/net.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/net.h b/include/linux/net.h index dc95700de5df..99276c3dc89a 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -248,6 +248,7 @@ extern int sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int flags); extern int sock_map_fd(struct socket *sock, int flags); extern struct socket *sockfd_lookup(int fd, int *err); +extern struct socket *sock_from_file(struct file *file, int *err); #define sockfd_put(sock) fput(sock->file) extern int net_ratelimit(void); -- cgit v1.2.3 From 41f9d29f09ca0b22c3631e8a39676e74cda9bcc0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 26 Jun 2012 22:10:04 +0400 Subject: trimming task_work: kill ->data get rid of the only user of ->data; this is _not_ the final variant - in the end we'll have task_work and rcu_head identical and just use cred->rcu, at which point the separate allocation will be gone completely. Signed-off-by: Al Viro --- include/linux/task_work.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/task_work.h b/include/linux/task_work.h index 294d5d5e90b1..627421c0e108 100644 --- a/include/linux/task_work.h +++ b/include/linux/task_work.h @@ -10,14 +10,12 @@ typedef void (*task_work_func_t)(struct task_work *); struct task_work { struct hlist_node hlist; task_work_func_t func; - void *data; }; static inline void -init_task_work(struct task_work *twork, task_work_func_t func, void *data) +init_task_work(struct task_work *twork, task_work_func_t func) { twork->func = func; - twork->data = data; } int task_work_add(struct task_struct *task, struct task_work *twork, bool); -- cgit v1.2.3 From 158e1645e07f3e9f7e4962d7a0997f5c3b98311b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 27 Jun 2012 09:24:13 +0400 Subject: trim task_work: get rid of hlist layout based on Oleg's suggestion; single-linked list, task->task_works points to the last element, forward pointer from said last element points to head. I'd still prefer much more regular scheme with two pointers in task_work, but... Signed-off-by: Al Viro --- include/linux/sched.h | 2 +- include/linux/task_work.h | 4 ++-- include/linux/tracehook.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 4059c0f33f07..b9216ebc2789 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1405,7 +1405,7 @@ struct task_struct { int (*notifier)(void *priv); void *notifier_data; sigset_t *notifier_mask; - struct hlist_head task_works; + void *task_works; struct audit_context *audit_context; #ifdef CONFIG_AUDITSYSCALL diff --git a/include/linux/task_work.h b/include/linux/task_work.h index 627421c0e108..3b3e2c8d037b 100644 --- a/include/linux/task_work.h +++ b/include/linux/task_work.h @@ -8,7 +8,7 @@ struct task_work; typedef void (*task_work_func_t)(struct task_work *); struct task_work { - struct hlist_node hlist; + struct task_work *next; task_work_func_t func; }; @@ -24,7 +24,7 @@ void task_work_run(void); static inline void exit_task_work(struct task_struct *task) { - if (unlikely(!hlist_empty(&task->task_works))) + if (unlikely(task->task_works)) task_work_run(); } diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 6a4d82bedb03..1e98b5530425 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -192,7 +192,7 @@ static inline void tracehook_notify_resume(struct pt_regs *regs) * hlist_add_head(task->task_works); */ smp_mb__after_clear_bit(); - if (unlikely(!hlist_empty(¤t->task_works))) + if (unlikely(current->task_works)) task_work_run(); } -- cgit v1.2.3 From 67d1214551e800f9fe7dc7c47a346d2df0fafed5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 27 Jun 2012 11:07:19 +0400 Subject: merge task_work and rcu_head, get rid of separate allocation for keyring case task_work and rcu_head are identical now; merge them (calling the result struct callback_head, rcu_head #define'd to it), kill separate allocation in security/keys since we can just use cred->rcu now. Signed-off-by: Al Viro --- include/linux/sched.h | 2 +- include/linux/task_work.h | 14 ++++---------- include/linux/types.h | 9 +++++---- 3 files changed, 10 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index b9216ebc2789..af3555cc760f 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1405,7 +1405,7 @@ struct task_struct { int (*notifier)(void *priv); void *notifier_data; sigset_t *notifier_mask; - void *task_works; + struct callback_head *task_works; struct audit_context *audit_context; #ifdef CONFIG_AUDITSYSCALL diff --git a/include/linux/task_work.h b/include/linux/task_work.h index 3b3e2c8d037b..fb46b03b1852 100644 --- a/include/linux/task_work.h +++ b/include/linux/task_work.h @@ -4,22 +4,16 @@ #include #include -struct task_work; -typedef void (*task_work_func_t)(struct task_work *); - -struct task_work { - struct task_work *next; - task_work_func_t func; -}; +typedef void (*task_work_func_t)(struct callback_head *); static inline void -init_task_work(struct task_work *twork, task_work_func_t func) +init_task_work(struct callback_head *twork, task_work_func_t func) { twork->func = func; } -int task_work_add(struct task_struct *task, struct task_work *twork, bool); -struct task_work *task_work_cancel(struct task_struct *, task_work_func_t); +int task_work_add(struct task_struct *task, struct callback_head *twork, bool); +struct callback_head *task_work_cancel(struct task_struct *, task_work_func_t); void task_work_run(void); static inline void exit_task_work(struct task_struct *task) diff --git a/include/linux/types.h b/include/linux/types.h index 9c1bd539ea70..bf0dd7524b2a 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -246,14 +246,15 @@ struct ustat { }; /** - * struct rcu_head - callback structure for use with RCU + * struct callback_head - callback structure for use with RCU and task_work * @next: next update requests in a list * @func: actual update function to call after the grace period. */ -struct rcu_head { - struct rcu_head *next; - void (*func)(struct rcu_head *head); +struct callback_head { + struct callback_head *next; + void (*func)(struct callback_head *head); }; +#define rcu_head callback_head #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From 4a9d4b024a3102fc083c925c242d98ac27b1c5f6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jun 2012 09:56:45 +0400 Subject: switch fput to task_work_add ... and schedule_work() for interrupt/kernel_thread callers (and yes, now it *is* OK to call from interrupt). We are guaranteed that __fput() will be done before we return to userland (or exit). Note that for fput() from a kernel thread we get an async behaviour; it's almost always OK, but sometimes you might need to have __fput() completed before you do anything else. There are two mechanisms for that - a general barrier (flush_delayed_fput()) and explicit __fput_sync(). Both should be used with care (as was the case for fput() from kernel threads all along). See comments in fs/file_table.c for details. Signed-off-by: Al Viro --- include/linux/file.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/file.h b/include/linux/file.h index 58bf158c53d9..a22408bac0d0 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -39,4 +39,7 @@ extern void put_unused_fd(unsigned int fd); extern void fd_install(unsigned int fd, struct file *file); +extern void flush_delayed_fput(void); +extern void __fput_sync(struct file *); + #endif /* __LINUX_FILE_H */ -- cgit v1.2.3 From 6120d3dbb1220792ebea88cd475e1ec8f8620a93 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jun 2012 10:03:05 +0400 Subject: get rid of ->scm_work_list recursion in __scm_destroy() will be cut by delaying final fput() Signed-off-by: Al Viro --- include/linux/sched.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index af3555cc760f..598ba2da7865 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1546,7 +1546,6 @@ struct task_struct { unsigned long timer_slack_ns; unsigned long default_timer_slack_ns; - struct list_head *scm_work_list; #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* Index of current stored address in ret_stack */ int curr_ret_stack; -- cgit v1.2.3 From ceed17236a7491b44ee2be21f56a41ab997cbe7d Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 3 Jul 2012 16:45:28 +0200 Subject: quota: Split dquot_quota_sync() to writeback and cache flushing part Split off part of dquot_quota_sync() which writes dquots into a quota file to a separate function. In the next patch we will use the function from filesystems and we do not want to abuse ->quota_sync quotactl callback more than necessary. Acked-by: Steven Whitehouse Reviewed-by: Christoph Hellwig Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/quota.h | 2 +- include/linux/quotaops.h | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/quota.h b/include/linux/quota.h index c09fa042b5ea..524ede8a160a 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -333,7 +333,7 @@ struct quotactl_ops { int (*quota_on)(struct super_block *, int, int, struct path *); int (*quota_on_meta)(struct super_block *, int, int); int (*quota_off)(struct super_block *, int); - int (*quota_sync)(struct super_block *, int, int); + int (*quota_sync)(struct super_block *, int); int (*get_info)(struct super_block *, int, struct if_dqinfo *); int (*set_info)(struct super_block *, int, struct if_dqinfo *); int (*get_dqblk)(struct super_block *, int, qid_t, struct fs_disk_quota *); diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 17b977304a09..ec6b65feaaba 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -83,7 +83,8 @@ int dquot_quota_on(struct super_block *sb, int type, int format_id, int dquot_quota_on_mount(struct super_block *sb, char *qf_name, int format_id, int type); int dquot_quota_off(struct super_block *sb, int type); -int dquot_quota_sync(struct super_block *sb, int type, int wait); +int dquot_writeback_dquots(struct super_block *sb, int type); +int dquot_quota_sync(struct super_block *sb, int type); int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii); int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii); int dquot_get_dqblk(struct super_block *sb, int type, qid_t id, @@ -255,6 +256,11 @@ static inline int dquot_resume(struct super_block *sb, int type) #define dquot_file_open generic_file_open +static inline int dquot_writeback_dquots(struct super_block *sb, int type) +{ + return 0; +} + #endif /* CONFIG_QUOTA */ static inline int dquot_alloc_space_nodirty(struct inode *inode, qsize_t nr) -- cgit v1.2.3 From 5c0d6b60a0ba46d45020547eacf7199171920935 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 3 Jul 2012 16:45:31 +0200 Subject: vfs: Create function for iterating over block devices Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 48548bdd7722..6a6ca85bee23 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2102,6 +2102,7 @@ extern sector_t blkdev_max_block(struct block_device *bdev); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); extern void invalidate_bdev(struct block_device *); +extern void iterate_bdevs(void (*)(struct block_device *, void *), void *); extern int sync_blockdev(struct block_device *bdev); extern void kill_bdev(struct block_device *); extern struct super_block *freeze_bdev(struct block_device *); @@ -2123,6 +2124,10 @@ static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb) { return 0; } + +static inline void iterate_bdevs(void (*f)(struct block_device *, void *), void *arg) +{ +} #endif extern int sync_filesystem(struct super_block *); extern const struct file_operations def_blk_fops; -- cgit v1.2.3 From e8b96eb5034a0ccebf36760f88e31ea3e3cdf1e4 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 30 Apr 2012 13:11:29 -0500 Subject: vfs: allow custom EOF in generic_file_llseek code For ext3/4 htree directories, using the vfs llseek function with SEEK_END goes to i_size like for any other file, but in reality we want the maximum possible hash value. Recent changes in ext4 have cut & pasted generic_file_llseek() back into fs/ext4/dir.c, but replicating this core code seems like a bad idea, especially since the copy has already diverged from the vfs. This patch updates generic_file_llseek_size to accept both a custom maximum offset, and a custom EOF position. With this in place, ext4_dir_llseek can pass in the appropriate maximum hash position for both maxsize and eof, and get what it wants. As far as I know, this does not fix any bugs - nfs in the kernel doesn't use SEEK_END, and I don't know of any user who does. But some ext4 folks seem keen on doing the right thing here, and I can't really argue. (Patch also fixes up some comments slightly) Signed-off-by: Eric Sandeen Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 6a6ca85bee23..34acf51273dd 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2454,7 +2454,7 @@ extern loff_t noop_llseek(struct file *file, loff_t offset, int origin); extern loff_t no_llseek(struct file *file, loff_t offset, int origin); extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin); extern loff_t generic_file_llseek_size(struct file *file, loff_t offset, - int origin, loff_t maxsize); + int origin, loff_t maxsize, loff_t eof); extern int generic_file_open(struct inode * inode, struct file * filp); extern int nonseekable_open(struct inode * inode, struct file * filp); -- cgit v1.2.3 From 765927b2d508712d320c8934db963bbe14c3fcec Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 26 Jun 2012 21:58:53 +0400 Subject: switch dentry_open() to struct path, make it grab references itself Signed-off-by: Al Viro --- include/linux/fs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 34acf51273dd..8fabb037a48d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2060,8 +2060,7 @@ extern long do_sys_open(int dfd, const char __user *filename, int flags, extern struct file *filp_open(const char *, int, umode_t); extern struct file *file_open_root(struct dentry *, struct vfsmount *, const char *, int); -extern struct file * dentry_open(struct dentry *, struct vfsmount *, int, - const struct cred *); +extern struct file * dentry_open(const struct path *, int, const struct cred *); extern int filp_close(struct file *, fl_owner_t id); extern char * getname(const char __user *); enum { -- cgit v1.2.3 From 563d34d05786263893ba4a1042eb9b9374127cf5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Jul 2012 09:48:52 +0200 Subject: tcp: dont drop MTU reduction indications MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ICMP messages generated in output path if frame length is bigger than mtu are actually lost because socket is owned by user (doing the xmit) One example is the ipgre_tunnel_xmit() calling icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); We had a similar case fixed in commit a34a101e1e6 (ipv6: disable GSO on sockets hitting dst_allfrag). Problem of such fix is that it relied on retransmit timers, so short tcp sessions paid a too big latency increase price. This patch uses the tcp_release_cb() infrastructure so that MTU reduction messages (ICMP messages) are not lost, and no extra delay is added in TCP transmits. Reported-by: Maciej Å»enczykowski Diagnosed-by: Neal Cardwell Signed-off-by: Eric Dumazet Cc: Nandita Dukkipati Cc: Tom Herbert Cc: Tore Anderson Signed-off-by: David S. Miller --- include/linux/tcp.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 2761856987b2..eb125a4c30b3 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -493,6 +493,9 @@ struct tcp_sock { u32 probe_seq_start; u32 probe_seq_end; } mtu_probe; + u32 mtu_info; /* We received an ICMP_FRAG_NEEDED / ICMPV6_PKT_TOOBIG + * while socket was owned by user. + */ #ifdef CONFIG_TCP_MD5SIG /* TCP AF-Specific parts; only used by MD5 Signature support so far */ @@ -518,6 +521,9 @@ enum tsq_flags { TCP_TSQ_DEFERRED, /* tcp_tasklet_func() found socket was owned */ TCP_WRITE_TIMER_DEFERRED, /* tcp_write_timer() found socket was owned */ TCP_DELACK_TIMER_DEFERRED, /* tcp_delack_timer() found socket was owned */ + TCP_MTU_REDUCED_DEFERRED, /* tcp_v{4|6}_err() could not call + * tcp_v{4|6}_mtu_reduced() + */ }; static inline struct tcp_sock *tcp_sk(const struct sock *sk) -- cgit v1.2.3 From 3e3ed6cdc49d758719c148a78c8b04c243ef74d0 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 16 Dec 2011 21:25:29 +0100 Subject: pwm-backlight: Add rudimentary device tree support This commit adds very basic support for device tree probing. Currently, only a PWM and a list of distinct brightness levels can be specified. Enabling or disabling backlight power via GPIOs is not yet supported. Reviewed-by: Shawn Guo Reviewed-by: Mark Brown Signed-off-by: Thierry Reding --- include/linux/pwm_backlight.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h index 63d2df43e61a..56f4a866539a 100644 --- a/include/linux/pwm_backlight.h +++ b/include/linux/pwm_backlight.h @@ -12,6 +12,7 @@ struct platform_pwm_backlight_data { unsigned int dft_brightness; unsigned int lth_brightness; unsigned int pwm_period_ns; + unsigned int *levels; int (*init)(struct device *dev); int (*notify)(struct device *dev, int brightness); void (*notify_after)(struct device *dev, int brightness); -- cgit v1.2.3 From ab25383983fb8d7786696f5371e75e79c3e9a405 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 5 Jul 2012 18:12:38 +0200 Subject: of/lib: Allow scripts/dtc/libfdt to be used from kernel code libfdt is part of the device tree support in scripts/dtc/libfdt. For some platforms that use the Device Tree, we want to be able to edit the flattened device tree form. We don't want to burden kernel builds that do not require it, so we gate compilation of libfdt files with CONFIG_LIBFDT. So if it is needed, you need to do this in your Kconfig: select LIBFDT And in the Makefile of the code using libfdt something like: ccflags-y := -I$(src)/../../../scripts/dtc/libfdt Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely Cc: linux-kernel@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Ralf Baechle --- include/linux/libfdt.h | 8 ++++++++ include/linux/libfdt_env.h | 13 +++++++++++++ 2 files changed, 21 insertions(+) create mode 100644 include/linux/libfdt.h create mode 100644 include/linux/libfdt_env.h (limited to 'include/linux') diff --git a/include/linux/libfdt.h b/include/linux/libfdt.h new file mode 100644 index 000000000000..4c0306c69b4e --- /dev/null +++ b/include/linux/libfdt.h @@ -0,0 +1,8 @@ +#ifndef _INCLUDE_LIBFDT_H_ +#define _INCLUDE_LIBFDT_H_ + +#include +#include "../../scripts/dtc/libfdt/fdt.h" +#include "../../scripts/dtc/libfdt/libfdt.h" + +#endif /* _INCLUDE_LIBFDT_H_ */ diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h new file mode 100644 index 000000000000..01508c7b8c81 --- /dev/null +++ b/include/linux/libfdt_env.h @@ -0,0 +1,13 @@ +#ifndef _LIBFDT_ENV_H +#define _LIBFDT_ENV_H + +#include + +#include + +#define fdt32_to_cpu(x) be32_to_cpu(x) +#define cpu_to_fdt32(x) cpu_to_be32(x) +#define fdt64_to_cpu(x) be64_to_cpu(x) +#define cpu_to_fdt64(x) cpu_to_be64(x) + +#endif /* _LIBFDT_ENV_H */ -- cgit v1.2.3 From 5bb629c504394f4d42c53a25d75ccb02a393f92f Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Sun, 27 May 2012 07:19:22 +0800 Subject: leds: add oneshot blink functions Add two new functions, led_blink_set_oneshot and led_trigger_blink_oneshot, to be used by triggers for one-shot blink of led devices. This is implemented extending the existing software-blink code, and uses the same timer and handler function. The behavior of the code is to do a blink-on, blink-off sequence when the function is called, ignoring other calls until the sequence is completed so that the leds keep blinking at constant rate if the functions are called repeatedly. This is meant to be used by drivers which needs to trigger on sporadic event, but doesn't have clear busy/idle trigger points. After the blink sequence the led remains off. This behavior can be inverted setting the "invert" argument, which blink the led off, than on and leave the led on after the sequence. (bryan.wu@canonical.com: rebase to commit 'leds: don't disable blinking when writing the same value to delay_on or delay_off') Signed-off-by: Fabio Baltieri Acked-by: Shuah Khan Signed-off-by: Bryan Wu --- include/linux/leds.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/leds.h b/include/linux/leds.h index 39eee41d8c6f..dd93a22044bb 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -38,6 +38,9 @@ struct led_classdev { #define LED_SUSPENDED (1 << 0) /* Upper 16 bits reflect control information */ #define LED_CORE_SUSPENDRESUME (1 << 16) +#define LED_BLINK_ONESHOT (1 << 17) +#define LED_BLINK_ONESHOT_STOP (1 << 18) +#define LED_BLINK_INVERT (1 << 19) /* Set LED brightness level */ /* Must not sleep, use a workqueue if needed */ @@ -102,6 +105,24 @@ extern void led_classdev_resume(struct led_classdev *led_cdev); extern void led_blink_set(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off); +/** + * led_blink_set_oneshot - do a oneshot software blink + * @led_cdev: the LED to start blinking + * @delay_on: the time it should be on (in ms) + * @delay_off: the time it should ble off (in ms) + * @invert: blink off, then on, leaving the led on + * + * This function makes the LED blink one time for delay_on + + * delay_off time, ignoring the request if another one-shot + * blink is already in progress. + * + * If invert is set, led blinks for delay_off first, then for + * delay_on and leave the led on after the on-off cycle. + */ +extern void led_blink_set_oneshot(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off, + int invert); /** * led_brightness_set - set LED brightness * @led_cdev: the LED to set @@ -150,6 +171,10 @@ extern void led_trigger_event(struct led_trigger *trigger, extern void led_trigger_blink(struct led_trigger *trigger, unsigned long *delay_on, unsigned long *delay_off); +extern void led_trigger_blink_oneshot(struct led_trigger *trigger, + unsigned long *delay_on, + unsigned long *delay_off, + int invert); #else -- cgit v1.2.3 From 19cd67e2d51225b164560b54b85f943e07deee8a Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 14 Jun 2012 04:34:30 +0800 Subject: leds: Rename led_brightness_set() to led_set_brightness() Rename leds external interface led_brightness_set() to led_set_brightness(). This is the second phase of the change to reduce confusion between the leds internal and external interfaces that set brightness. With this change, now the external interface is led_set_brightness(). The first phase renamed the internal interface led_set_brightness() to __led_set_brightness(). There are no changes to the interface implementations. Signed-off-by: Shuah Khan Signed-off-by: Bryan Wu --- include/linux/leds.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/leds.h b/include/linux/leds.h index dd93a22044bb..3aade1d8f410 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -124,7 +124,7 @@ extern void led_blink_set_oneshot(struct led_classdev *led_cdev, unsigned long *delay_off, int invert); /** - * led_brightness_set - set LED brightness + * led_set_brightness - set LED brightness * @led_cdev: the LED to set * @brightness: the brightness to set it to * @@ -132,7 +132,7 @@ extern void led_blink_set_oneshot(struct led_classdev *led_cdev, * software blink timer that implements blinking when the * hardware doesn't. */ -extern void led_brightness_set(struct led_classdev *led_cdev, +extern void led_set_brightness(struct led_classdev *led_cdev, enum led_brightness brightness); /* -- cgit v1.2.3 From 32abb4788d3fff69fa242c7850e39ec1418df4f4 Mon Sep 17 00:00:00 2001 From: "G.Shark Jeong" Date: Fri, 22 Jun 2012 08:12:06 +0800 Subject: leds: Add LED driver for lm3556 chip LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf Tested on OMAP4430 (bryan.wu@canonical.com: use module_i2c_driver() rather than lm3556_init/lm3556_exit for code simplicity; fixed some typo pointed out by Rob Landley) Signed-off-by: G.Shark Jeong Reviewed-by: Axel Lin Reviewed-by: Kim, Milo Acked-by: Rob Landley Signed-off-by: Bryan Wu --- include/linux/platform_data/leds-lm3556.h | 50 +++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 include/linux/platform_data/leds-lm3556.h (limited to 'include/linux') diff --git a/include/linux/platform_data/leds-lm3556.h b/include/linux/platform_data/leds-lm3556.h new file mode 100644 index 000000000000..4b4e7d6b0527 --- /dev/null +++ b/include/linux/platform_data/leds-lm3556.h @@ -0,0 +1,50 @@ +/* + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) + * Copyright (C) 2012 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_LM3556_H +#define __LINUX_LM3556_H + +#define LM3556_NAME "leds-lm3556" + +enum lm3556_pin_polarity { + PIN_LOW_ACTIVE = 0, + PIN_HIGH_ACTIVE, +}; + +enum lm3556_pin_enable { + PIN_DISABLED = 0, + PIN_ENABLED, +}; + +enum lm3556_strobe_usuage { + STROBE_EDGE_DETECT = 0, + STROBE_LEVEL_DETECT, +}; + +enum lm3556_indic_mode { + INDIC_MODE_INTERNAL = 0, + INDIC_MODE_EXTERNAL, +}; + +struct lm3556_platform_data { + enum lm3556_pin_enable torch_pin_en; + enum lm3556_pin_polarity torch_pin_polarity; + + enum lm3556_strobe_usuage strobe_usuage; + enum lm3556_pin_enable strobe_pin_en; + enum lm3556_pin_polarity strobe_pin_polarity; + + enum lm3556_pin_enable tx_pin_en; + enum lm3556_pin_polarity tx_pin_polarity; + + enum lm3556_indic_mode indicator_mode; +}; + +#endif /* __LINUX_LM3556_H */ -- cgit v1.2.3 From 320f5ea0cedc08ef65d67e056bcb9d181386ef2c Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 24 Jul 2012 13:44:01 +0800 Subject: genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP lockdep_is_held() is defined when CONFIG_LOCKDEP, not CONFIG_PROVE_LOCKING. Cc: "David S. Miller" Cc: Jesse Gross Signed-off-by: WANG Cong Signed-off-by: David S. Miller --- include/linux/genetlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 7a114016ac7d..5ab61c1eb6bf 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -85,7 +85,7 @@ enum { /* All generic netlink requests are serialized by a global lock. */ extern void genl_lock(void); extern void genl_unlock(void); -#ifdef CONFIG_PROVE_LOCKING +#ifdef CONFIG_LOCKDEP extern int lockdep_genl_is_held(void); #endif -- cgit v1.2.3 From 1285e4c8a751a7aedeb6bd35d2c08794e088b908 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 22 Jun 2012 23:17:53 +0800 Subject: highmem: remove the deprecated form of kmap_atomic Signed-off-by: Cong Wang --- include/linux/highmem.h | 41 +---------------------------------------- 1 file changed, 1 insertion(+), 40 deletions(-) (limited to 'include/linux') diff --git a/include/linux/highmem.h b/include/linux/highmem.h index d3999b4e26cc..774fa47b3b5b 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -109,55 +109,16 @@ static inline void kmap_atomic_idx_pop(void) #endif -/* - * NOTE: - * kmap_atomic() and kunmap_atomic() with two arguments are deprecated. - * We only keep them for backward compatibility, any usage of them - * are now warned. - */ - -#define PASTE(a, b) a ## b -#define PASTE2(a, b) PASTE(a, b) - -#define NARG_(_2, _1, n, ...) n -#define NARG(...) NARG_(__VA_ARGS__, 2, 1, :) - -static inline void __deprecated *kmap_atomic_deprecated(struct page *page, - enum km_type km) -{ - return kmap_atomic(page); -} - -#define kmap_atomic1(...) kmap_atomic(__VA_ARGS__) -#define kmap_atomic2(...) kmap_atomic_deprecated(__VA_ARGS__) -#define kmap_atomic(...) PASTE2(kmap_atomic, NARG(__VA_ARGS__)(__VA_ARGS__)) - -static inline void __deprecated __kunmap_atomic_deprecated(void *addr, - enum km_type km) -{ - __kunmap_atomic(addr); -} - /* * Prevent people trying to call kunmap_atomic() as if it were kunmap() * kunmap_atomic() should get the return value of kmap_atomic, not the page. */ -#define kunmap_atomic_deprecated(addr, km) \ -do { \ - BUILD_BUG_ON(__same_type((addr), struct page *)); \ - __kunmap_atomic_deprecated(addr, km); \ -} while (0) - -#define kunmap_atomic_withcheck(addr) \ +#define kunmap_atomic(addr) \ do { \ BUILD_BUG_ON(__same_type((addr), struct page *)); \ __kunmap_atomic(addr); \ } while (0) -#define kunmap_atomic1(...) kunmap_atomic_withcheck(__VA_ARGS__) -#define kunmap_atomic2(...) kunmap_atomic_deprecated(__VA_ARGS__) -#define kunmap_atomic(...) PASTE2(kunmap_atomic, NARG(__VA_ARGS__)(__VA_ARGS__)) -/**** End of C pre-processor tricks for deprecated macros ****/ /* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */ #ifndef clear_user_highpage -- cgit v1.2.3 From 2164d3344693d2d4799fe91836d61f55516cbdf0 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Sat, 23 Jun 2012 11:33:51 +0800 Subject: pipe: remove KM_USER0 from comments Signed-off-by: Cong Wang --- include/linux/pipe_fs_i.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index e1ac1ce16fb0..e11d1c0fc60f 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -86,11 +86,9 @@ struct pipe_buf_operations { * mapping or not. The atomic map is faster, however you can't take * page faults before calling ->unmap() again. So if you need to eg * access user data through copy_to/from_user(), then you must get - * a non-atomic map. ->map() uses the KM_USER0 atomic slot for - * atomic maps, so you can't map more than one pipe_buffer at once - * and you have to be careful if mapping another page as source - * or destination for a copy (IOW, it has to use something else - * than KM_USER0). + * a non-atomic map. ->map() uses the kmap_atomic slot for + * atomic maps, you have to be careful if mapping another page as + * source or destination for a copy. */ void * (*map)(struct pipe_inode_info *, struct pipe_buffer *, int); -- cgit v1.2.3 From a58b3a4aba2fd5c445d9deccc73192bff48b591d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan-Simon=20M=C3=B6ller?= Date: Mon, 23 Jul 2012 20:48:56 +0200 Subject: Fix typo in include/linux/clk.h . MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jan-Simon Möller Cc: Russell King Cc: linux-kernel@vger.kernel.org Signed-off-by: Jiri Kosina --- include/linux/clk.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk.h b/include/linux/clk.h index ad5c43e8ae8a..f6fb40c8bf97 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -86,7 +86,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); /** * clk_get - lookup and obtain a reference to a clock producer. * @dev: device for clock "consumer" - * @id: clock comsumer ID + * @id: clock consumer ID * * Returns a struct clk corresponding to the clock producer, or * valid IS_ERR() condition containing errno. The implementation @@ -103,7 +103,7 @@ struct clk *clk_get(struct device *dev, const char *id); /** * devm_clk_get - lookup and obtain a managed reference to a clock producer. * @dev: device for clock "consumer" - * @id: clock comsumer ID + * @id: clock consumer ID * * Returns a struct clk corresponding to the clock producer, or * valid IS_ERR() condition containing errno. The implementation -- cgit v1.2.3 From 7ddf96b02fe8dd441f452deef879040def5f7b34 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 24 May 2012 19:46:55 +0530 Subject: cpusets, hotplug: Restructure functions that are invoked during hotplug Separate out the cpuset related handling for CPU/Memory online/offline. This also helps us exploit the most obvious and basic level of optimization that any notification mechanism (CPU/Mem online/offline) has to offer us: "We *know* why we have been invoked. So stop pretending that we are lost, and do only the necessary amount of processing!". And while at it, rename scan_for_empty_cpusets() to scan_cpusets_upon_hotplug(), which is more appropriate considering how it is restructured. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20120524141650.3692.48637.stgit@srivatsabhat.in.ibm.com Signed-off-by: Ingo Molnar --- include/linux/cpuset.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 668f66baac7b..838320fc3d1d 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -20,7 +20,7 @@ extern int number_of_cpusets; /* How many cpusets are defined in system? */ extern int cpuset_init(void); extern void cpuset_init_smp(void); -extern void cpuset_update_active_cpus(void); +extern void cpuset_update_active_cpus(bool cpu_online); extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask); extern void cpuset_cpus_allowed_fallback(struct task_struct *p); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); @@ -124,7 +124,7 @@ static inline void set_mems_allowed(nodemask_t nodemask) static inline int cpuset_init(void) { return 0; } static inline void cpuset_init_smp(void) {} -static inline void cpuset_update_active_cpus(void) +static inline void cpuset_update_active_cpus(bool cpu_online) { partition_sched_domains(1, NULL, NULL); } -- cgit v1.2.3 From 970e178985cadbca660feb02f4d2ee3a09f7fdda Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 12 Jun 2012 05:18:32 +0200 Subject: sched: Improve scalability via 'CPU buddies', which withstand random perturbations Traversing an entire package is not only expensive, it also leads to tasks bouncing all over a partially idle and possible quite large package. Fix that up by assigning a 'buddy' CPU to try to motivate. Each buddy may try to motivate that one other CPU, if it's busy, tough, it may then try its SMT sibling, but that's all this optimization is allowed to cost. Sibling cache buddies are cross-wired to prevent bouncing. 4 socket 40 core + SMT Westmere box, single 30 sec tbench runs, higher is better: clients 1 2 4 8 16 32 64 128 .......................................................................... pre 30 41 118 645 3769 6214 12233 14312 post 299 603 1211 2418 4697 6847 11606 14557 A nice increase in performance. Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1339471112.7352.32.camel@marge.simpson.net Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 4a1f493e0fef..bc9952991710 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -949,6 +949,7 @@ struct sched_domain { unsigned int smt_gain; int flags; /* See SD_* */ int level; + int idle_buddy; /* cpu assigned to select_idle_sibling() */ /* Runtime fields. */ unsigned long last_balance; /* init to jiffies. units in jiffies */ -- cgit v1.2.3 From 8323f26ce3425460769605a6aece7a174edaa7d1 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 22 Jun 2012 13:36:05 +0200 Subject: sched: Fix race in task_group() Stefan reported a crash on a kernel before a3e5d1091c1 ("sched: Don't call task_group() too many times in set_task_rq()"), he found the reason to be that the multiple task_group() invocations in set_task_rq() returned different values. Looking at all that I found a lack of serialization and plain wrong comments. The below tries to fix it using an extra pointer which is updated under the appropriate scheduler locks. Its not pretty, but I can't really see another way given how all the cgroup stuff works. Reported-and-tested-by: Stefan Bader Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1340364965.18025.71.camel@twins Signed-off-by: Ingo Molnar --- include/linux/init_task.h | 12 +++++++++++- include/linux/sched.h | 5 ++++- 2 files changed, 15 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 9e65eff6af3b..b806b821e735 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -123,8 +123,17 @@ extern struct group_info init_groups; extern struct cred init_cred; +extern struct task_group root_task_group; + +#ifdef CONFIG_CGROUP_SCHED +# define INIT_CGROUP_SCHED(tsk) \ + .sched_task_group = &root_task_group, +#else +# define INIT_CGROUP_SCHED(tsk) +#endif + #ifdef CONFIG_PERF_EVENTS -# define INIT_PERF_EVENTS(tsk) \ +# define INIT_PERF_EVENTS(tsk) \ .perf_event_mutex = \ __MUTEX_INITIALIZER(tsk.perf_event_mutex), \ .perf_event_list = LIST_HEAD_INIT(tsk.perf_event_list), @@ -161,6 +170,7 @@ extern struct cred init_cred; }, \ .tasks = LIST_HEAD_INIT(tsk.tasks), \ INIT_PUSHABLE_TASKS(tsk) \ + INIT_CGROUP_SCHED(tsk) \ .ptraced = LIST_HEAD_INIT(tsk.ptraced), \ .ptrace_entry = LIST_HEAD_INIT(tsk.ptrace_entry), \ .real_parent = &tsk, \ diff --git a/include/linux/sched.h b/include/linux/sched.h index bc9952991710..fd9436a3a545 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1245,6 +1245,9 @@ struct task_struct { const struct sched_class *sched_class; struct sched_entity se; struct sched_rt_entity rt; +#ifdef CONFIG_CGROUP_SCHED + struct task_group *sched_task_group; +#endif #ifdef CONFIG_PREEMPT_NOTIFIERS /* list of struct preempt_notifier: */ @@ -2724,7 +2727,7 @@ extern int sched_group_set_rt_period(struct task_group *tg, extern long sched_group_rt_period(struct task_group *tg); extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk); #endif -#endif +#endif /* CONFIG_CGROUP_SCHED */ extern int task_can_switch_user(struct user_struct *up, struct task_struct *tsk); -- cgit v1.2.3 From d47726c52122d64253ae56e0fafdb7d0b954e97c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Jul 2012 14:13:59 +0200 Subject: i2c: Add SCCB support SCCB is a serial communication bus developed by Omnivision. Its 2-wire mode is very similar to SMBus byte data transactions, but requires the controller to ignore the ACK bit and to insert a stop condition after each message. Add a device SCCB flag and a message stop flag to be passed to controller drivers. [JD: Kill rogue definition in go7007 driver.] Signed-off-by: Laurent Pinchart Signed-off-by: Jean Delvare --- include/linux/i2c.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index ddfa04108baf..1d0fe4877b1f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -425,6 +425,8 @@ void i2c_unlock_adapter(struct i2c_adapter *); #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ /* Must equal I2C_M_TEN below */ #define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */ +#define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */ + /* Must match I2C_M_STOP|IGNORE_NAK */ /* i2c adapter classes (bitmask) */ #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ @@ -541,6 +543,7 @@ struct i2c_msg { __u16 flags; #define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ #define I2C_M_RD 0x0001 /* read data, from slave to master */ +#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ #define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -- cgit v1.2.3 From be4ac00ac486aa68f82a940602963c466cea1a4e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 16 Jul 2012 11:49:43 +0200 Subject: mfd: Fix twl6040 revision information twl6040 ES1.1 and ES1.2 have the same revid (0x01). ES1.3 of twl6040 REVID is 0x02. Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- include/linux/mfd/twl6040.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index dcc0e12b8038..00b330e578b1 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -161,8 +161,8 @@ #define TWL6040_CELLS 2 #define TWL6040_REV_ES1_0 0x00 -#define TWL6040_REV_ES1_1 0x01 -#define TWL6040_REV_ES1_2 0x02 +#define TWL6040_REV_ES1_1 0x01 /* Rev ES1.1 and ES1.2 */ +#define TWL6040_REV_ES1_3 0x02 #define TWL6040_IRQ_TH 0 #define TWL6040_IRQ_PLUG 1 -- cgit v1.2.3 From 1fc74aef0420f6bad7b632cbc961edac40a3eeae Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 16 Jul 2012 11:49:44 +0200 Subject: mfd: Add support for twl6041 The delta between twl6040 and twl6041 is small, the main difference is in the number of GPOs (3 on twl6040, 1 on twl6041). Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- include/linux/mfd/twl6040.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 00b330e578b1..eaad49f7c130 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -163,6 +163,7 @@ #define TWL6040_REV_ES1_0 0x00 #define TWL6040_REV_ES1_1 0x01 /* Rev ES1.1 and ES1.2 */ #define TWL6040_REV_ES1_3 0x02 +#define TWL6041_REV_ES2_0 0x10 #define TWL6040_IRQ_TH 0 #define TWL6040_IRQ_PLUG 1 -- cgit v1.2.3 From c56f5c0342dfee11a1a13d2f5bb7618de5b17590 Mon Sep 17 00:00:00 2001 From: Durgadoss R Date: Wed, 25 Jul 2012 10:10:58 +0800 Subject: Thermal: Make Thermal trip points writeable Some of the thermal drivers using the Generic Thermal Framework require (all/some) trip points to be writeable. This patch makes the trip point temperatures writeable on a per-trip point basis, and modifies the required function call in thermal.c. This patch also updates the Documentation to reflect the new change. Signed-off-by: Durgadoss R Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/linux/thermal.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 796f1ff0388c..6eaf9146c847 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -58,6 +58,8 @@ struct thermal_zone_device_ops { enum thermal_trip_type *); int (*get_trip_temp) (struct thermal_zone_device *, int, unsigned long *); + int (*set_trip_temp) (struct thermal_zone_device *, int, + unsigned long); int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *); int (*notify) (struct thermal_zone_device *, int, enum thermal_trip_type); @@ -85,10 +87,17 @@ struct thermal_cooling_device { ((long)t-2732+5)/10 : ((long)t-2732-5)/10) #define CELSIUS_TO_KELVIN(t) ((t)*10+2732) +struct thermal_attr { + struct device_attribute attr; + char name[THERMAL_NAME_LENGTH]; +}; + struct thermal_zone_device { int id; char type[THERMAL_NAME_LENGTH]; struct device device; + struct thermal_attr *trip_temp_attrs; + struct thermal_attr *trip_type_attrs; void *devdata; int trips; int tc1; @@ -137,9 +146,9 @@ enum { }; #define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) -struct thermal_zone_device *thermal_zone_device_register(char *, int, void *, - const struct thermal_zone_device_ops *, int tc1, int tc2, - int passive_freq, int polling_freq); +struct thermal_zone_device *thermal_zone_device_register(char *, int, int, + void *, const struct thermal_zone_device_ops *, int tc1, + int tc2, int passive_freq, int polling_freq); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, -- cgit v1.2.3 From 27365a6c7d64a3bba22ee62109e4a071bbd7f933 Mon Sep 17 00:00:00 2001 From: Durgadoss R Date: Wed, 25 Jul 2012 10:10:59 +0800 Subject: Thermal: Add Hysteresis attributes The Linux Thermal Framework does not support hysteresis attributes. Most thermal sensors, today, have a hysteresis value associated with trip points. This patch adds hysteresis attributes on a per-trip-point basis, to the Thermal Framework. These attributes are optionally writable. Signed-off-by: Durgadoss R Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/linux/thermal.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 6eaf9146c847..cfc8d908892e 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -60,6 +60,10 @@ struct thermal_zone_device_ops { unsigned long *); int (*set_trip_temp) (struct thermal_zone_device *, int, unsigned long); + int (*get_trip_hyst) (struct thermal_zone_device *, int, + unsigned long *); + int (*set_trip_hyst) (struct thermal_zone_device *, int, + unsigned long); int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *); int (*notify) (struct thermal_zone_device *, int, enum thermal_trip_type); @@ -98,6 +102,7 @@ struct thermal_zone_device { struct device device; struct thermal_attr *trip_temp_attrs; struct thermal_attr *trip_type_attrs; + struct thermal_attr *trip_hyst_attrs; void *devdata; int trips; int tc1; -- cgit v1.2.3 From 43c4d13e901a8f37d9abbd410f093ebe885b5322 Mon Sep 17 00:00:00 2001 From: Simon Budig Date: Tue, 24 Jul 2012 23:29:36 -0700 Subject: Input: add driver for FT5x06 based EDT displays This is a driver for the EDT "Polytouch" family of touch controllers based on the FocalTech FT5x06 line of chips. Signed-off-by: Simon Budig Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/input/edt-ft5x06.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/input/edt-ft5x06.h (limited to 'include/linux') diff --git a/include/linux/input/edt-ft5x06.h b/include/linux/input/edt-ft5x06.h new file mode 100644 index 000000000000..8a1e0d1a0124 --- /dev/null +++ b/include/linux/input/edt-ft5x06.h @@ -0,0 +1,24 @@ +#ifndef _EDT_FT5X06_H +#define _EDT_FT5X06_H + +/* + * Copyright (c) 2012 Simon Budig, + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +struct edt_ft5x06_platform_data { + int irq_pin; + int reset_pin; + + /* startup defaults for operational parameters */ + bool use_parameters; + u8 gain; + u8 threshold; + u8 offset; + u8 report_rate; +}; + +#endif /* _EDT_FT5X06_H */ -- cgit v1.2.3 From a007c4c3e943ecc054a806c259d95420a188754b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 12 Jun 2012 16:54:16 -0400 Subject: nfsd: add get_uint for u32's I don't think there's a practical difference for the range of values these interfaces should see, but it would be safer to be unambiguous. Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/cache.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index af42596a82f9..f792794f6634 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -230,6 +230,22 @@ static inline int get_int(char **bpp, int *anint) return 0; } +static inline int get_uint(char **bpp, unsigned int *anint) +{ + char buf[50]; + int len = qword_get(bpp, buf, sizeof(buf)); + + if (len < 0) + return -EINVAL; + if (len == 0) + return -ENOENT; + + if (kstrtouint(buf, 0, anint)) + return -EINVAL; + + return 0; +} + /* * timestamps kept in the cache are expressed in seconds * since boot. This is the best for measuring differences in -- cgit v1.2.3 From 8ded2bbc1845e19c771eb55209aab166ef011243 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 25 Jul 2012 10:40:34 -0400 Subject: posix_types.h: Cleanup stale __NFDBITS and related definitions Recently, glibc made a change to suppress sign-conversion warnings in FD_SET (glibc commit ceb9e56b3d1). This uncovered an issue with the kernel's definition of __NFDBITS if applications #include after including . A build failure would be seen when passing the -Werror=sign-compare and -D_FORTIFY_SOURCE=2 flags to gcc. It was suggested that the kernel should either match the glibc definition of __NFDBITS or remove that entirely. The current in-kernel uses of __NFDBITS can be replaced with BITS_PER_LONG, and there are no uses of the related __FDELT and __FDMASK defines. Given that, we'll continue the cleanup that was started with commit 8b3d1cda4f5f ("posix_types: Remove fd_set macros") and drop the remaining unused macros. Additionally, linux/time.h has similar macros defined that expand to nothing so we'll remove those at the same time. Reported-by: Jeff Law Suggested-by: Linus Torvalds CC: Signed-off-by: Josh Boyer [ .. and fix up whitespace as per akpm ] Signed-off-by: Linus Torvalds --- include/linux/posix_types.h | 18 +++--------------- include/linux/time.h | 8 -------- 2 files changed, 3 insertions(+), 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h index f04c98cf44f3..988f76e636e3 100644 --- a/include/linux/posix_types.h +++ b/include/linux/posix_types.h @@ -15,26 +15,14 @@ */ /* - * Those macros may have been defined in . But we always - * use the ones here. + * This macro may have been defined in . But we always + * use the one here. */ -#undef __NFDBITS -#define __NFDBITS (8 * sizeof(unsigned long)) - #undef __FD_SETSIZE #define __FD_SETSIZE 1024 -#undef __FDSET_LONGS -#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS) - -#undef __FDELT -#define __FDELT(d) ((d) / __NFDBITS) - -#undef __FDMASK -#define __FDMASK(d) (1UL << ((d) % __NFDBITS)) - typedef struct { - unsigned long fds_bits [__FDSET_LONGS]; + unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))]; } __kernel_fd_set; /* Type of a signal handler. */ diff --git a/include/linux/time.h b/include/linux/time.h index 179f4d6755fc..c81c5e40fcb5 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -257,14 +257,6 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) #endif /* __KERNEL__ */ -#define NFDBITS __NFDBITS - -#define FD_SETSIZE __FD_SETSIZE -#define FD_SET(fd,fdsetp) __FD_SET(fd,fdsetp) -#define FD_CLR(fd,fdsetp) __FD_CLR(fd,fdsetp) -#define FD_ISSET(fd,fdsetp) __FD_ISSET(fd,fdsetp) -#define FD_ZERO(fdsetp) __FD_ZERO(fdsetp) - /* * Names of the interval timers, and structure * defining a timer setting: -- cgit v1.2.3 From 6b583fa318f7229a398fc04369141bf2f3522db5 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 11 Jun 2012 21:57:13 +0200 Subject: serial/8250: Add LPC3220 standard UART type LPC32xx has "Standard" UARTs that are actually 16550A compatible but have bigger FIFOs. Since the already supported 16X50 line still doesn't match here, we agreed on adding a new type. Signed-off-by: Roland Stigge Acked-by: Alan Cox Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 65db9928e15f..0253c2022e53 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -47,7 +47,8 @@ #define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ #define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ #define PORT_XR17D15X 21 /* Exar XR17D15x UART */ -#define PORT_MAX_8250 21 /* max port ID */ +#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ +#define PORT_MAX_8250 22 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed -- cgit v1.2.3 From c777ad69185de908a0d571abbaec117392b3ad1b Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Mon, 28 May 2012 22:23:51 +0800 Subject: cpumask: add a few comments of cpumask functions Current few cpumask functions' purposes are not quite clear. Stupid user like myself needs to dig into details for clear function purpose and return value. Add few explanation for them is helpful. Thanks for Srivatsa's comments and correction! Signed-off-by: Alex Shi Acked-by: KOSAKI Motohiro Signed-off-by: Rusty Russell --- include/linux/cpumask.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index a2c819d3c96e..8bf1c275fce3 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -272,6 +272,8 @@ static inline void cpumask_clear_cpu(int cpu, struct cpumask *dstp) * @cpu: cpu number (< nr_cpu_ids) * @cpumask: the cpumask pointer * + * Returns 1 if @cpu is set in @cpumask, else returns 0 + * * No static inline type checking - see Subtlety (1) above. */ #define cpumask_test_cpu(cpu, cpumask) \ @@ -282,6 +284,8 @@ static inline void cpumask_clear_cpu(int cpu, struct cpumask *dstp) * @cpu: cpu number (< nr_cpu_ids) * @cpumask: the cpumask pointer * + * Returns 1 if @cpu is set in old bitmap of @cpumask, else returns 0 + * * test_and_set_bit wrapper for cpumasks. */ static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask) @@ -294,6 +298,8 @@ static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask) * @cpu: cpu number (< nr_cpu_ids) * @cpumask: the cpumask pointer * + * Returns 1 if @cpu is set in old bitmap of @cpumask, else returns 0 + * * test_and_clear_bit wrapper for cpumasks. */ static inline int cpumask_test_and_clear_cpu(int cpu, struct cpumask *cpumask) @@ -324,6 +330,8 @@ static inline void cpumask_clear(struct cpumask *dstp) * @dstp: the cpumask result * @src1p: the first input * @src2p: the second input + * + * If *@dstp is empty, returns 0, else returns 1 */ static inline int cpumask_and(struct cpumask *dstp, const struct cpumask *src1p, @@ -365,6 +373,8 @@ static inline void cpumask_xor(struct cpumask *dstp, * @dstp: the cpumask result * @src1p: the first input * @src2p: the second input + * + * If *@dstp is empty, returns 0, else returns 1 */ static inline int cpumask_andnot(struct cpumask *dstp, const struct cpumask *src1p, @@ -414,6 +424,8 @@ static inline bool cpumask_intersects(const struct cpumask *src1p, * cpumask_subset - (*src1p & ~*src2p) == 0 * @src1p: the first input * @src2p: the second input + * + * Returns 1 if *@src1p is a subset of *@src2p, else returns 0 */ static inline int cpumask_subset(const struct cpumask *src1p, const struct cpumask *src2p) -- cgit v1.2.3 From 96263d2863ab5dfe101bf4dec74e3508cc5d003d Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Thu, 14 Jun 2012 16:00:59 -0600 Subject: init: add comments to keep initcall-names in sync with initcall levels main.c has initcall_level_names[] for parse_args to print in debug messages, add comments to keep them in sync with initcalls defined in init.h. Also add "loadable" into comment re not using *_initcall macros in modules, to disambiguate from kernel/params.c and other builtins. Signed-off-by: Jim Cromie Acked-by: Borislav Petkov Signed-off-by: Rusty Russell --- include/linux/init.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 6b951095a42f..5e664f671615 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -191,6 +191,7 @@ extern bool initcall_debug; * initializes variables that couldn't be statically initialized. * * This only exists for built-in code, not for modules. + * Keep main.c:initcall_level_names[] in sync. */ #define pure_initcall(fn) __define_initcall("0",fn,0) @@ -280,7 +281,7 @@ void __init parse_early_options(char *cmdline); #else /* MODULE */ -/* Don't use these in modules, but some people do... */ +/* Don't use these in loadable modules, but some people do... */ #define early_initcall(fn) module_init(fn) #define core_initcall(fn) module_init(fn) #define postcore_initcall(fn) module_init(fn) -- cgit v1.2.3 From 231daf0751ccaf21373f591c524a3f557a15d03f Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Fri, 27 Jul 2012 09:29:42 +0930 Subject: cpumask: cpulist_parse() comments correction As introduced in Rusty's commit 29c0177e6a4, the function has no parameter @len, so need to remove it from comments to avoid kernel-doc warning: alexs@debian:~/linux-next$ scripts/kernel-doc -man include/linux/cpumask.h | split-man.pl /tmp/man .... Warning(include/linux/cpumask.h:602): Excess function parameter 'len' description in 'cpulist_parse' and correct the function name in comments to cpulist_parse. Signed-off-by: Alex Shi Signed-off-by: Rusty Russell --- include/linux/cpumask.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 8bf1c275fce3..032560295fcb 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -591,9 +591,8 @@ static inline int cpulist_scnprintf(char *buf, int len, } /** - * cpulist_parse_user - extract a cpumask from a user string of ranges + * cpulist_parse - extract a cpumask from a user string of ranges * @buf: the buffer to extract from - * @len: the length of the buffer * @dstp: the cpumask to set. * * Returns -errno, or 0 for success. -- cgit v1.2.3 From af7346ebbda5f4a95da71359231d32cb136bd246 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 27 Jul 2012 15:07:58 +0100 Subject: dm: remove unused flush target method Remove unused dm_flush_fn .flush target method from header. This was left-over from the FLUSH/FUA conversion and is no longer used. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 98f34b886f95..d70cbb2ada25 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -66,7 +66,6 @@ typedef int (*dm_request_endio_fn) (struct dm_target *ti, struct request *clone, int error, union map_info *map_context); -typedef void (*dm_flush_fn) (struct dm_target *ti); typedef void (*dm_presuspend_fn) (struct dm_target *ti); typedef void (*dm_postsuspend_fn) (struct dm_target *ti); typedef int (*dm_preresume_fn) (struct dm_target *ti); @@ -139,7 +138,6 @@ struct target_type { dm_map_request_fn map_rq; dm_endio_fn end_io; dm_request_endio_fn rq_end_io; - dm_flush_fn flush; dm_presuspend_fn presuspend; dm_postsuspend_fn postsuspend; dm_preresume_fn preresume; -- cgit v1.2.3 From 542f90381422676544382d4071ba44a2de90a0c1 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 27 Jul 2012 15:08:00 +0100 Subject: dm: support non power of two target max_io_len Remove the restriction that limits a target's specified maximum incoming I/O size to be a power of 2. Rename this setting from 'split_io' to the less-ambiguous 'max_io_len'. Change it from sector_t to uint32_t, which is plenty big enough, and introduce a wrapper function dm_set_target_max_io_len() to set it. Use sector_div() to process it now that it is not necessarily a power of 2. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 9 +++++++-- include/linux/dm-ioctl.h | 4 ++-- 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index d70cbb2ada25..b19c1e189a68 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -186,8 +186,8 @@ struct dm_target { sector_t begin; sector_t len; - /* Always a power of 2 */ - sector_t split_io; + /* If non-zero, maximum size of I/O submitted to a target. */ + uint32_t max_io_len; /* * A number of zero-length barrier requests that will be submitted @@ -357,6 +357,11 @@ void dm_table_add_target_callbacks(struct dm_table *t, struct dm_target_callback */ int dm_table_complete(struct dm_table *t); +/* + * Target may require that it is never sent I/O larger than len. + */ +int __must_check dm_set_target_max_io_len(struct dm_target *ti, sector_t len); + /* * Table reference counting. */ diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h index 75fd5573516e..3ece4eee84cb 100644 --- a/include/linux/dm-ioctl.h +++ b/include/linux/dm-ioctl.h @@ -268,8 +268,8 @@ enum { #define DM_VERSION_MAJOR 4 #define DM_VERSION_MINOR 22 -#define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2011-10-19)" +#define DM_VERSION_PATCHLEVEL 1 +#define DM_VERSION_EXTRA "-ioctl (2012-06-01)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ -- cgit v1.2.3 From 7acf0277cea0f2da89ffffcc9892bea23f618e63 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 27 Jul 2012 15:08:03 +0100 Subject: dm: introduce split_discard_requests This patch introduces a new variable split_discard_requests. It can be set by targets so that discard requests are split on max_io_len boundaries. When split_discard_requests is not set, discard requests are only split on boundaries between targets, as was the case before this patch. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index b19c1e189a68..8bdbbfce759a 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -217,6 +217,12 @@ struct dm_target { */ unsigned discards_supported:1; + /* + * Set if the target required discard request to be split + * on max_io_len boundary. + */ + unsigned split_discard_requests:1; + /* * Set if this target does not return zeroes on discarded blocks. */ -- cgit v1.2.3 From 0e9c24ed7443d090e369a2eddfa13f7f0b5afbaf Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 27 Jul 2012 15:08:07 +0100 Subject: dm: allow targets to request flushes regardless of underlying device support Allow targets to override the 'supports flush' calculation. Set 'flush_supported' if a target needs to receive flushes regardless of whether or not its underlying devices have support. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 8bdbbfce759a..bdd65e97a129 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -211,6 +211,12 @@ struct dm_target { /* Used to provide an error string from the ctr */ char *error; + /* + * Set if this target needs to receive flushes regardless of + * whether or not its underlying devices have support. + */ + bool flush_supported:1; + /* * Set if this target needs to receive discards regardless of * whether or not its underlying devices have support. -- cgit v1.2.3 From 0ac55489d9e3898987b2ae305844cf2af86e6b8d Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Fri, 27 Jul 2012 15:08:08 +0100 Subject: dm: use bool bitfields in struct dm_target Use boolean bit fields for flags in struct dm_target. Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index bdd65e97a129..eb753633b576 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -221,18 +221,18 @@ struct dm_target { * Set if this target needs to receive discards regardless of * whether or not its underlying devices have support. */ - unsigned discards_supported:1; + bool discards_supported:1; /* * Set if the target required discard request to be split * on max_io_len boundary. */ - unsigned split_discard_requests:1; + bool split_discard_requests:1; /* * Set if this target does not return zeroes on discarded blocks. */ - unsigned discard_zeroes_data_unsupported:1; + bool discard_zeroes_data_unsupported:1; }; /* Each target can link one of these into the table */ -- cgit v1.2.3 From 1f4e0ff07980820977f45d6a5dbc81d3bb9ce4d3 Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Fri, 27 Jul 2012 15:08:16 +0100 Subject: dm thin: commit before gathering status Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 2 +- include/linux/dm-ioctl.h | 8 +++++--- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index eb753633b576..38d27a10aa5d 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -72,7 +72,7 @@ typedef int (*dm_preresume_fn) (struct dm_target *ti); typedef void (*dm_resume_fn) (struct dm_target *ti); typedef int (*dm_status_fn) (struct dm_target *ti, status_type_t status_type, - char *result, unsigned int maxlen); + unsigned status_flags, char *result, unsigned maxlen); typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv); diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h index 3ece4eee84cb..91e3a360f611 100644 --- a/include/linux/dm-ioctl.h +++ b/include/linux/dm-ioctl.h @@ -267,9 +267,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 22 -#define DM_VERSION_PATCHLEVEL 1 -#define DM_VERSION_EXTRA "-ioctl (2012-06-01)" +#define DM_VERSION_MINOR 23 +#define DM_VERSION_PATCHLEVEL 0 +#define DM_VERSION_EXTRA "-ioctl (2012-07-25)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ @@ -307,6 +307,8 @@ enum { /* * Set this to suspend without flushing queued ios. + * Also disables flushing uncommitted changes in the thin target before + * generating statistics for DM_TABLE_STATUS and DM_DEV_WAIT. */ #define DM_NOFLUSH_FLAG (1 << 11) /* In */ -- cgit v1.2.3 From b26411f85d3763ec5fc553854d9c3c0966072090 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Wed, 25 Jul 2012 16:55:54 +0400 Subject: LockD: mark host per network namespace on garbage collect This is required for per-network NLM shutdown and cleanup. This patch passes init_net for a while. Signed-off-by: Stanislav Kinsbursky Signed-off-by: J. Bruce Fields --- include/linux/lockd/lockd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index f04ce6ac6d04..50e31a2c1a97 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -279,7 +279,7 @@ void nlmsvc_release_call(struct nlm_rqst *); __be32 nlm_lookup_file(struct svc_rqst *, struct nlm_file **, struct nfs_fh *); void nlm_release_file(struct nlm_file *); -void nlmsvc_mark_resources(void); +void nlmsvc_mark_resources(struct net *); void nlmsvc_free_host_resources(struct nlm_host *); void nlmsvc_invalidate_all(void); -- cgit v1.2.3 From 9695c7057f4887ed54dc1e6c2ef22f72a2be1175 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Wed, 25 Jul 2012 16:57:06 +0400 Subject: SUNRPC: service request network namespace helper introduced This is a cleanup patch - makes code looks simplier. It replaces widely used rqstp->rq_xprt->xpt_net by introduced SVC_NET(rqstp). Signed-off-by: Stanislav Kinsbursky Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 40e0a273faea..d83db800fe02 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -278,6 +278,8 @@ struct svc_rqst { struct task_struct *rq_task; /* service thread */ }; +#define SVC_NET(svc_rqst) (svc_rqst->rq_xprt->xpt_net) + /* * Rigorous type checking on sockaddr type conversions */ -- cgit v1.2.3 From 5ccb0066f2d561549cc4d73d7f56b4ce3ca7a8a1 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Wed, 25 Jul 2012 16:57:22 +0400 Subject: LockD: pass actual network namespace to grace period management functions Passed network namespace replaced hard-coded init_net Signed-off-by: Stanislav Kinsbursky Signed-off-by: J. Bruce Fields --- include/linux/fs.h | 5 +++-- include/linux/lockd/lockd.h | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 17fd887c798f..a1e77270f5a5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1163,9 +1163,10 @@ struct lock_manager { struct list_head list; }; -void locks_start_grace(struct lock_manager *); +struct net; +void locks_start_grace(struct net *, struct lock_manager *); void locks_end_grace(struct lock_manager *); -int locks_in_grace(void); +int locks_in_grace(struct net *); /* that will die - we need it for nfs_lock_info */ #include diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 50e31a2c1a97..f5a051a79273 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -262,11 +262,11 @@ typedef int (*nlm_host_match_fn_t)(void *cur, struct nlm_host *ref); __be32 nlmsvc_lock(struct svc_rqst *, struct nlm_file *, struct nlm_host *, struct nlm_lock *, int, struct nlm_cookie *, int); -__be32 nlmsvc_unlock(struct nlm_file *, struct nlm_lock *); +__be32 nlmsvc_unlock(struct net *net, struct nlm_file *, struct nlm_lock *); __be32 nlmsvc_testlock(struct svc_rqst *, struct nlm_file *, struct nlm_host *, struct nlm_lock *, struct nlm_lock *, struct nlm_cookie *); -__be32 nlmsvc_cancel_blocked(struct nlm_file *, struct nlm_lock *); +__be32 nlmsvc_cancel_blocked(struct net *net, struct nlm_file *, struct nlm_lock *); unsigned long nlmsvc_retry_blocked(void); void nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *, nlm_host_match_fn_t match); -- cgit v1.2.3 From f838eb5bd257e8a666aa8c451058fa198df7e299 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 13 Jun 2012 09:32:01 +0200 Subject: acpi: add a way to promote/demote vendor backlight drivers Instead of adding a big blacklist in video_detect.c to set ACPI_VIDEO_BACKLIGHT_DMI_VENDOR correctly, let external modules promote or demote themselves when they know the generic video module won't work. Currently drivers where using acpi_video_unregister() directly but: - That didn't respect any acpi_backlight=[video|vendor] parameter provided by the user. - Any later call to acpi_video_register() would still re-load the generic video module (and some gpu drivers are doing that). This patch fix those two issues. Signed-off-by: Corentin Chary Signed-off-by: Matthew Garrett --- include/linux/acpi.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index f421dd84f29d..27ab2011067b 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -190,6 +190,8 @@ extern bool wmi_has_guid(const char *guid); extern long acpi_video_get_capabilities(acpi_handle graphics_dev_handle); extern long acpi_is_video_device(struct acpi_device *device); +extern void acpi_video_dmi_promote_vendor(void); +extern void acpi_video_dmi_demote_vendor(void); extern int acpi_video_backlight_support(void); extern int acpi_video_display_switch_support(void); @@ -205,6 +207,14 @@ static inline long acpi_is_video_device(struct acpi_device *device) return 0; } +static inline void acpi_video_dmi_promote_vendor(void) +{ +} + +static inline void acpi_video_dmi_demote_vendor(void) +{ +} + static inline int acpi_video_backlight_support(void) { return 0; -- cgit v1.2.3 From 921a1650de9eed40dd64d681aba4a4d98856f289 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 20 Jul 2012 01:15:31 +0400 Subject: new helper: done_path_create() releases what needs to be released after {kern,user}_path_create() Signed-off-by: Al Viro --- include/linux/namei.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index d2ef8b34b967..4bf19d8174ed 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -67,6 +67,7 @@ extern int kern_path(const char *, unsigned, struct path *); extern struct dentry *kern_path_create(int, const char *, struct path *, int); extern struct dentry *user_path_create(int, const char __user *, struct path *, int); +extern void done_path_create(struct path *, struct dentry *); extern struct dentry *kern_path_locked(const char *, struct path *); extern int vfs_path_lookup(struct dentry *, struct vfsmount *, const char *, unsigned int, struct path *); -- cgit v1.2.3 From e4fad8e5d220e3dfb1050eee752ee5058f29a232 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 21 Jul 2012 15:33:25 +0400 Subject: consolidate pipe file creation Signed-off-by: Al Viro --- include/linux/fs.h | 3 --- include/linux/pipe_fs_i.h | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 8fabb037a48d..478237844648 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2326,9 +2326,6 @@ static inline void i_readcount_inc(struct inode *inode) } #endif extern int do_pipe_flags(int *, int); -extern struct file *create_read_pipe(struct file *f, int flags); -extern struct file *create_write_pipe(int flags); -extern void free_write_pipe(struct file *); extern int kernel_read(struct file *, loff_t, char *, unsigned long); extern struct file * open_exec(const char *); diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index e1ac1ce16fb0..e16dcb31f0c7 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -162,4 +162,6 @@ void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *); long pipe_fcntl(struct file *, unsigned int, unsigned long arg); struct pipe_inode_info *get_pipe_info(struct file *file); +int create_pipe_files(struct file **, int); + #endif -- cgit v1.2.3 From 800179c9b8a1e796e441674776d11cd4c05d61d7 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 25 Jul 2012 17:29:07 -0700 Subject: fs: add link restrictions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds symlink and hardlink restrictions to the Linux VFS. Symlinks: A long-standing class of security issues is the symlink-based time-of-check-time-of-use race, most commonly seen in world-writable directories like /tmp. The common method of exploitation of this flaw is to cross privilege boundaries when following a given symlink (i.e. a root process follows a symlink belonging to another user). For a likely incomplete list of hundreds of examples across the years, please see: http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp The solution is to permit symlinks to only be followed when outside a sticky world-writable directory, or when the uid of the symlink and follower match, or when the directory owner matches the symlink's owner. Some pointers to the history of earlier discussion that I could find: 1996 Aug, Zygo Blaxell http://marc.info/?l=bugtraq&m=87602167419830&w=2 1996 Oct, Andrew Tridgell http://lkml.indiana.edu/hypermail/linux/kernel/9610.2/0086.html 1997 Dec, Albert D Cahalan http://lkml.org/lkml/1997/12/16/4 2005 Feb, Lorenzo Hernández García-Hierro http://lkml.indiana.edu/hypermail/linux/kernel/0502.0/1896.html 2010 May, Kees Cook https://lkml.org/lkml/2010/5/30/144 Past objections and rebuttals could be summarized as: - Violates POSIX. - POSIX didn't consider this situation and it's not useful to follow a broken specification at the cost of security. - Might break unknown applications that use this feature. - Applications that break because of the change are easy to spot and fix. Applications that are vulnerable to symlink ToCToU by not having the change aren't. Additionally, no applications have yet been found that rely on this behavior. - Applications should just use mkstemp() or O_CREATE|O_EXCL. - True, but applications are not perfect, and new software is written all the time that makes these mistakes; blocking this flaw at the kernel is a single solution to the entire class of vulnerability. - This should live in the core VFS. - This should live in an LSM. (https://lkml.org/lkml/2010/5/31/135) - This should live in an LSM. - This should live in the core VFS. (https://lkml.org/lkml/2010/8/2/188) Hardlinks: On systems that have user-writable directories on the same partition as system files, a long-standing class of security issues is the hardlink-based time-of-check-time-of-use race, most commonly seen in world-writable directories like /tmp. The common method of exploitation of this flaw is to cross privilege boundaries when following a given hardlink (i.e. a root process follows a hardlink created by another user). Additionally, an issue exists where users can "pin" a potentially vulnerable setuid/setgid file so that an administrator will not actually upgrade a system fully. The solution is to permit hardlinks to only be created when the user is already the existing file's owner, or if they already have read/write access to the existing file. Many Linux users are surprised when they learn they can link to files they have no access to, so this change appears to follow the doctrine of "least surprise". Additionally, this change does not violate POSIX, which states "the implementation may require that the calling process has permission to access the existing file"[1]. This change is known to break some implementations of the "at" daemon, though the version used by Fedora and Ubuntu has been fixed[2] for a while. Otherwise, the change has been undisruptive while in use in Ubuntu for the last 1.5 years. [1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/linkat.html [2] http://anonscm.debian.org/gitweb/?p=collab-maint/at.git;a=commitdiff;h=f4114656c3a6c6f6070e315ffdf940a49eda3279 This patch is based on the patches in Openwall and grsecurity, along with suggestions from Al Viro. I have added a sysctl to enable the protected behavior, and documentation. Signed-off-by: Kees Cook Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Al Viro --- include/linux/fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 478237844648..80c819cbe272 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -437,6 +437,8 @@ extern unsigned long get_max_files(void); extern int sysctl_nr_open; extern struct inodes_stat_t inodes_stat; extern int leases_enable, lease_break_time; +extern int sysctl_protected_symlinks; +extern int sysctl_protected_hardlinks; struct buffer_head; typedef int (get_block_t)(struct inode *inode, sector_t iblock, -- cgit v1.2.3 From a51d9eaa41866ab6b4b6ecad7b621f8b66ece0dc Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 25 Jul 2012 17:29:08 -0700 Subject: fs: add link restriction audit reporting Adds audit messages for unexpected link restriction violations so that system owners will have some sort of potentially actionable information about misbehaving processes. Signed-off-by: Kees Cook Signed-off-by: Al Viro --- include/linux/audit.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 22f292a917a3..36abf2aa7e68 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -130,6 +130,7 @@ #define AUDIT_LAST_KERN_ANOM_MSG 1799 #define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */ #define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */ +#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */ #define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */ #define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */ #define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */ @@ -687,6 +688,8 @@ extern void audit_log_d_path(struct audit_buffer *ab, const struct path *path); extern void audit_log_key(struct audit_buffer *ab, char *key); +extern void audit_log_link_denied(const char *operation, + struct path *link); extern void audit_log_lost(const char *message); #ifdef CONFIG_SECURITY extern void audit_log_secctx(struct audit_buffer *ab, u32 secid); @@ -716,6 +719,7 @@ extern int audit_enabled; #define audit_log_untrustedstring(a,s) do { ; } while (0) #define audit_log_d_path(b, p, d) do { ; } while (0) #define audit_log_key(b, k) do { ; } while (0) +#define audit_log_link_denied(o, l) do { ; } while (0) #define audit_log_secctx(b,s) do { ; } while (0) #define audit_enabled 0 #endif -- cgit v1.2.3 From ddcc286900732953ac2e950b6ad0f9a4933767fb Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Mon, 28 May 2012 12:18:39 +0530 Subject: virtio ids: fix comment for virtio-rng It's virtio-rng, not virtio-ring. Signed-off-by: Amit Shah Signed-off-by: Rusty Russell --- include/linux/virtio_ids.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h index 7529b854b7fd..270fb22c5811 100644 --- a/include/linux/virtio_ids.h +++ b/include/linux/virtio_ids.h @@ -32,7 +32,7 @@ #define VIRTIO_ID_NET 1 /* virtio net */ #define VIRTIO_ID_BLOCK 2 /* virtio block */ #define VIRTIO_ID_CONSOLE 3 /* virtio console */ -#define VIRTIO_ID_RNG 4 /* virtio ring */ +#define VIRTIO_ID_RNG 4 /* virtio rng */ #define VIRTIO_ID_BALLOON 5 /* virtio balloon */ #define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ #define VIRTIO_ID_SCSI 8 /* virtio scsi */ -- cgit v1.2.3 From cd5d503862b0d0d927c56ef2e34d3ededac88039 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 3 Jul 2012 15:19:37 +0200 Subject: virtio-blk: allow toggling host cache between writeback and writethrough This patch adds support for the new VIRTIO_BLK_F_CONFIG_WCE feature, which exposes the cache mode in the configuration space and lets the driver modify it. The cache mode is exposed via sysfs. Even if the host does not support the new feature, the cache mode is visible (thanks to the existing VIRTIO_BLK_F_WCE), but not modifiable. Signed-off-by: Paolo Bonzini Signed-off-by: Rusty Russell --- include/linux/virtio_blk.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index e0edb40ca7aa..e2aba15f545d 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -37,8 +37,9 @@ #define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ -#define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */ +#define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */ #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ +#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ #define VIRTIO_BLK_ID_BYTES 20 /* ID string length */ @@ -69,6 +70,8 @@ struct virtio_blk_config { /* optimal sustained I/O size in logical blocks. */ __u32 opt_io_size; + /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */ + __u8 wce; } __attribute__((packed)); /* -- cgit v1.2.3 From 6a743897144500fb4c4566ced3a498d5180fbb5b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 30 Jul 2012 13:30:52 +0930 Subject: virtio-blk: return VIRTIO_BLK_F_FLUSH to header. This got renamed and clarified, but let's not break any userspace out there. Signed-off-by: Rusty Russell --- include/linux/virtio_blk.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index e2aba15f545d..6d8e61c48563 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -41,6 +41,11 @@ #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ #define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ +#ifndef __KERNEL__ +/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */ +#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE +#endif + #define VIRTIO_BLK_ID_BYTES 20 /* ID string length */ struct virtio_blk_config { -- cgit v1.2.3 From 5935e6dcaaa8f666dd7f1169fa87d36752ebeb94 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 23 Jul 2012 15:37:31 +0100 Subject: KEYS: linux/key-type.h needs linux/errno.h linux/key-type.h needs to #include linux/errno.h as it refers to ENOKEY. Without this, with sparc's allmodconfig in one of my test trees, the following error occurs: include/linux/key-type.h: In function 'key_negate_and_link': include/linux/key-type.h:122:43: error: 'ENOKEY' undeclared (first use in this function) include/linux/key-type.h:122:43: note: each undeclared identifier is reported only once for each fun Reported-by: Fengguang Wu Signed-off-by: David Howells Signed-off-by: James Morris --- include/linux/key-type.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/key-type.h b/include/linux/key-type.h index 39e3c082c49d..f0c651cda7b0 100644 --- a/include/linux/key-type.h +++ b/include/linux/key-type.h @@ -13,6 +13,7 @@ #define _LINUX_KEY_TYPE_H #include +#include #ifdef CONFIG_KEYS -- cgit v1.2.3 From efc42bc98058a36d761b16a114823db1a902ed05 Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Mon, 18 Jun 2012 09:25:01 +0200 Subject: scatterlist: add sg_alloc_table_from_pages function This patch adds a new constructor for an sg table. The table is constructed from an array of struct pages. All contiguous chunks of the pages are merged into a single sg nodes. A user may provide an offset and a size of a buffer if the buffer is not page-aligned. The function is dedicated for DMABUF exporters which often perform conversion from an page array to a scatterlist. Moreover the scatterlist should be squashed in order to save memory and to speed-up the process of DMA mapping using dma_map_sg. The code is based on the patch 'v4l: vb2-dma-contig: add support for scatterlist in userptr mode' and hints from Laurent Pinchart. Signed-off-by: Tomasz Stanislawski Signed-off-by: Kyungmin Park Acked-by: Daniel Vetter Acked-by: Laurent Pinchart Signed-off-by: Marek Szyprowski CC: Andrew Morton --- include/linux/scatterlist.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index ac9586dadfa5..7b600da9a635 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -214,6 +214,10 @@ void sg_free_table(struct sg_table *); int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int, gfp_t, sg_alloc_fn *); int sg_alloc_table(struct sg_table *, unsigned int, gfp_t); +int sg_alloc_table_from_pages(struct sg_table *sgt, + struct page **pages, unsigned int n_pages, + unsigned long offset, unsigned long size, + gfp_t gfp_mask); size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents, void *buf, size_t buflen); -- cgit v1.2.3 From 5e6cafc83e30f0f70c79a2b7aef237dc57e29f02 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 13 Apr 2012 12:32:09 +0200 Subject: mm: vmalloc: use const void * for caller argument 'const void *' is a safer type for caller function type. This patch updates all references to caller function type. Signed-off-by: Marek Szyprowski Reviewed-by: Kyungmin Park Reviewed-by: Minchan Kim --- include/linux/vmalloc.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index dcdfc2bda922..2e28f4d40d7f 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -32,7 +32,7 @@ struct vm_struct { struct page **pages; unsigned int nr_pages; phys_addr_t phys_addr; - void *caller; + const void *caller; }; /* @@ -62,7 +62,7 @@ extern void *vmalloc_32_user(unsigned long size); extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot); extern void *__vmalloc_node_range(unsigned long size, unsigned long align, unsigned long start, unsigned long end, gfp_t gfp_mask, - pgprot_t prot, int node, void *caller); + pgprot_t prot, int node, const void *caller); extern void vfree(const void *addr); extern void *vmap(struct page **pages, unsigned int count, @@ -85,13 +85,13 @@ static inline size_t get_vm_area_size(const struct vm_struct *area) extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags); extern struct vm_struct *get_vm_area_caller(unsigned long size, - unsigned long flags, void *caller); + unsigned long flags, const void *caller); extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags, unsigned long start, unsigned long end); extern struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags, unsigned long start, unsigned long end, - void *caller); + const void *caller); extern struct vm_struct *remove_vm_area(const void *addr); extern int map_vm_area(struct vm_struct *area, pgprot_t prot, -- cgit v1.2.3 From e9da6e9905e639b0f842a244bc770b48ad0523e9 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 30 Jul 2012 09:11:33 +0200 Subject: ARM: dma-mapping: remove custom consistent dma region This patch changes dma-mapping subsystem to use generic vmalloc areas for all consistent dma allocations. This increases the total size limit of the consistent allocations and removes platform hacks and a lot of duplicated code. Atomic allocations are served from special pool preallocated on boot, because vmalloc areas cannot be reliably created in atomic context. Signed-off-by: Marek Szyprowski Reviewed-by: Kyungmin Park Reviewed-by: Minchan Kim --- include/linux/vmalloc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 2e28f4d40d7f..6071e911c7f4 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -93,6 +93,7 @@ extern struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long start, unsigned long end, const void *caller); extern struct vm_struct *remove_vm_area(const void *addr); +extern struct vm_struct *find_vm_area(const void *addr); extern int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages); -- cgit v1.2.3 From d5724f172fd1406c6962c4d2e27228b8e9e83642 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 16 May 2012 15:20:37 +0200 Subject: common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute This patch adds DMA_ATTR_NO_KERNEL_MAPPING attribute which lets the platform to avoid creating a kernel virtual mapping for the allocated buffer. On some architectures creating such mapping is non-trivial task and consumes very limited resources (like kernel virtual address space or dma consistent address space). Buffers allocated with this attribute can be only passed to user space by calling dma_mmap_attrs(). Signed-off-by: Marek Szyprowski Reviewed-by: Kyungmin Park Reviewed-by: Daniel Vetter --- include/linux/dma-attrs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h index 547ab568d3ae..a37c10cc51c5 100644 --- a/include/linux/dma-attrs.h +++ b/include/linux/dma-attrs.h @@ -15,6 +15,7 @@ enum dma_attr { DMA_ATTR_WEAK_ORDERING, DMA_ATTR_WRITE_COMBINE, DMA_ATTR_NON_CONSISTENT, + DMA_ATTR_NO_KERNEL_MAPPING, DMA_ATTR_MAX, }; -- cgit v1.2.3 From d2b7428eb0caa7c66e34b6ac869a43915b294123 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 13 Jun 2012 10:05:52 +0200 Subject: common: dma-mapping: introduce dma_get_sgtable() function This patch adds dma_get_sgtable() function which is required to let drivers to share the buffers allocated by DMA-mapping subsystem. Right now the driver gets a dma address of the allocated buffer and the kernel virtual mapping for it. If it wants to share it with other device (= map into its dma address space) it usually hacks around kernel virtual addresses to get pointers to pages or assumes that both devices share the DMA address space. Both solutions are just hacks for the special cases, which should be avoided in the final version of buffer sharing. To solve this issue in a generic way, a new call to DMA mapping has been introduced - dma_get_sgtable(). It allocates a scatter-list which describes the allocated buffer and lets the driver(s) to use it with other device(s) by calling dma_map_sg() on it. This patch provides a generic implementation based on virt_to_page() call. Architectures which require more sophisticated translation might provide their own get_sgtable() methods. Signed-off-by: Marek Szyprowski Reviewed-by: Kyungmin Park Reviewed-by: Daniel Vetter --- include/linux/dma-mapping.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index dfc099e56a66..94af41858513 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -18,6 +18,9 @@ struct dma_map_ops { int (*mmap)(struct device *, struct vm_area_struct *, void *, dma_addr_t, size_t, struct dma_attrs *attrs); + int (*get_sgtable)(struct device *dev, struct sg_table *sgt, void *, + dma_addr_t, size_t, struct dma_attrs *attrs); + dma_addr_t (*map_page)(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, -- cgit v1.2.3 From bdf5e4871f1b41150236e2337837399109469e65 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 6 Jun 2012 14:46:44 +0200 Subject: common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute This patch adds DMA_ATTR_SKIP_CPU_SYNC attribute to the DMA-mapping subsystem. By default dma_map_{single,page,sg} functions family transfer a given buffer from CPU domain to device domain. Some advanced use cases might require sharing a buffer between more than one device. This requires having a mapping created separately for each device and is usually performed by calling dma_map_{single,page,sg} function more than once for the given buffer with device pointer to each device taking part in the buffer sharing. The first call transfers a buffer from 'CPU' domain to 'device' domain, what synchronizes CPU caches for the given region (usually it means that the cache has been flushed or invalidated depending on the dma direction). However, next calls to dma_map_{single,page,sg}() for other devices will perform exactly the same sychronization operation on the CPU cache. CPU cache sychronization might be a time consuming operation, especially if the buffers are large, so it is highly recommended to avoid it if possible. DMA_ATTR_SKIP_CPU_SYNC allows platform code to skip synchronization of the CPU cache for the given buffer assuming that it has been already transferred to 'device' domain. This attribute can be also used for dma_unmap_{single,page,sg} functions family to force buffer to stay in device domain after releasing a mapping for it. Use this attribute with care! Signed-off-by: Marek Szyprowski Reviewed-by: Kyungmin Park --- include/linux/dma-attrs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h index a37c10cc51c5..f83f793223ff 100644 --- a/include/linux/dma-attrs.h +++ b/include/linux/dma-attrs.h @@ -16,6 +16,7 @@ enum dma_attr { DMA_ATTR_WRITE_COMBINE, DMA_ATTR_NON_CONSISTENT, DMA_ATTR_NO_KERNEL_MAPPING, + DMA_ATTR_SKIP_CPU_SYNC, DMA_ATTR_MAX, }; -- cgit v1.2.3 From d50b409fb8698571d8209e5adfe122e287e31290 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Mon, 9 Jul 2012 14:22:34 -0700 Subject: libceph: initialize msgpool message types Initialize the type field for messages in a msgpool. The caller was doing this for osd ops, but not for the reply messages. Reported-by: Alex Elder Signed-off-by: Sage Weil --- include/linux/ceph/msgpool.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/msgpool.h b/include/linux/ceph/msgpool.h index a362605f9368..09fa96b43436 100644 --- a/include/linux/ceph/msgpool.h +++ b/include/linux/ceph/msgpool.h @@ -11,10 +11,11 @@ struct ceph_msgpool { const char *name; mempool_t *pool; + int type; /* preallocated message type */ int front_len; /* preallocated payload size */ }; -extern int ceph_msgpool_init(struct ceph_msgpool *pool, +extern int ceph_msgpool_init(struct ceph_msgpool *pool, int type, int front_len, int size, bool blocking, const char *name); extern void ceph_msgpool_destroy(struct ceph_msgpool *pool); -- cgit v1.2.3 From a16cb1f70799c851410d9dca0a24122e258df06c Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 10 Jul 2012 11:53:34 -0700 Subject: libceph: fix messenger retry In ancient times, the messenger could both initiate and accept connections. An artifact if that was data structures to store/process an incoming ceph_msg_connect request and send an outgoing ceph_msg_connect_reply. Sadly, the negotiation code was referencing those structures and ignoring important information (like the peer's connect_seq) from the correct ones. Among other things, this fixes tight reconnect loops where the server sends RETRY_SESSION and we (the client) retries with the same connect_seq as last time. This bug pretty easily triggered by injecting socket failures on the MDS and running some fs workload like workunits/direct_io/test_sync_io. Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 478f814f2100..cfb1bbdac624 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -172,16 +172,8 @@ struct ceph_connection { /* connection negotiation temps */ char in_banner[CEPH_BANNER_MAX_LEN]; - union { - struct { /* outgoing connection */ - struct ceph_msg_connect out_connect; - struct ceph_msg_connect_reply in_reply; - }; - struct { /* incoming */ - struct ceph_msg_connect in_connect; - struct ceph_msg_connect_reply out_reply; - }; - }; + struct ceph_msg_connect out_connect; + struct ceph_msg_connect_reply in_reply; struct ceph_entity_addr actual_peer_addr; /* message out temps */ -- cgit v1.2.3 From a2a3258417eb6a1799cf893350771428875a8287 Mon Sep 17 00:00:00 2001 From: Guanjun He Date: Sun, 8 Jul 2012 19:50:33 -0700 Subject: libceph: prevent the race of incoming work during teardown Add an atomic variable 'stopping' as flag in struct ceph_messenger, set this flag to 1 in function ceph_destroy_client(), and add the condition code in function ceph_data_ready() to test the flag value, if true(1), just return. Signed-off-by: Guanjun He Reviewed-by: Sage Weil --- include/linux/ceph/messenger.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index cfb1bbdac624..a310d7fe6e29 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -50,6 +50,7 @@ struct ceph_messenger { struct ceph_entity_inst inst; /* my name+address */ struct ceph_entity_addr my_enc_addr; + atomic_t stopping; bool nocrc; /* -- cgit v1.2.3 From c61a1abd215c1ccd6fa73104c79e79987ed3aa98 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 3 Jul 2012 16:01:18 -0500 Subject: libceph: fix off-by-one bug in ceph_encode_filepath() There is a BUG_ON() call that doesn't account for the single byte structure version at the start of an encoded filepath in ceph_encode_filepath(). Fix that. Signed-off-by: Alex Elder Reviewed-by: Yehuda Sadeh Reviewed-by: Josh Durgin --- include/linux/ceph/decode.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/decode.h b/include/linux/ceph/decode.h index d8615dee5808..bcbd66c84890 100644 --- a/include/linux/ceph/decode.h +++ b/include/linux/ceph/decode.h @@ -151,7 +151,7 @@ static inline void ceph_encode_filepath(void **p, void *end, u64 ino, const char *path) { u32 len = path ? strlen(path) : 0; - BUG_ON(*p + sizeof(ino) + sizeof(len) + len > end); + BUG_ON(*p + 1 + sizeof(ino) + sizeof(len) + len > end); ceph_encode_8(p, 1); ceph_encode_64(p, ino); ceph_encode_32(p, len); -- cgit v1.2.3 From f8c36c58accd5c53a472b5c289910565b3df9f9d Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 11 Jul 2012 08:24:45 -0500 Subject: libceph: define ceph_extract_encoded_string() This adds a new utility routine which will return a dynamically- allocated buffer containing a string that has been decoded from ceph over-the-wire format. It also returns the length of the string if the address of a size variable is supplied to receive it. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- include/linux/ceph/decode.h | 47 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ceph/decode.h b/include/linux/ceph/decode.h index bcbd66c84890..4bbf2db45f46 100644 --- a/include/linux/ceph/decode.h +++ b/include/linux/ceph/decode.h @@ -1,6 +1,7 @@ #ifndef __CEPH_DECODE_H #define __CEPH_DECODE_H +#include #include #include #include @@ -84,6 +85,52 @@ static inline int ceph_has_room(void **p, void *end, size_t n) ceph_decode_copy(p, pv, n); \ } while (0) +/* + * Allocate a buffer big enough to hold the wire-encoded string, and + * decode the string into it. The resulting string will always be + * terminated with '\0'. If successful, *p will be advanced + * past the decoded data. Also, if lenp is not a null pointer, the + * length (not including the terminating '\0') will be recorded in + * *lenp. Note that a zero-length string is a valid return value. + * + * Returns a pointer to the newly-allocated string buffer, or a + * pointer-coded errno if an error occurs. Neither *p nor *lenp + * will have been updated if an error is returned. + * + * There are two possible failures: + * - converting the string would require accessing memory at or + * beyond the "end" pointer provided (-E + * - memory could not be allocated for the result + */ +static inline char *ceph_extract_encoded_string(void **p, void *end, + size_t *lenp, gfp_t gfp) +{ + u32 len; + void *sp = *p; + char *buf; + + ceph_decode_32_safe(&sp, end, len, bad); + if (!ceph_has_room(&sp, end, len)) + goto bad; + + buf = kmalloc(len + 1, gfp); + if (!buf) + return ERR_PTR(-ENOMEM); + + if (len) + memcpy(buf, sp, len); + buf[len] = '\0'; + + *p = (char *) *p + sizeof (u32) + len; + if (lenp) + *lenp = (size_t) len; + + return buf; + +bad: + return ERR_PTR(-ERANGE); +} + /* * struct ceph_timespec <-> struct timespec */ -- cgit v1.2.3 From 4fcf1c6205fcfc7a226a144ae4d83b7f5415cab8 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 12 Jun 2012 16:20:29 +0200 Subject: mm: Make default vm_ops provide ->page_mkwrite handler Make default vm_ops provide ->page_mkwrite handler. Currently it only updates file's modification times and gets locked page but later it will also handle filesystem freezing. BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa Tested-by: Peter M. Petrakis Tested-by: Dann Frazier Tested-by: Massimo Morana Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index b36d08ce5c57..15987d8e1d59 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1411,6 +1411,7 @@ extern void truncate_inode_pages_range(struct address_space *, /* generic vm_area_ops exported for stackable file systems */ extern int filemap_fault(struct vm_area_struct *, struct vm_fault *); +extern int filemap_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); /* mm/page-writeback.c */ int write_one_page(struct page *page, int wait); -- cgit v1.2.3 From 4a55c1017b8dcfd0554734ce3f19374d5b522d59 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 12 Jun 2012 16:20:33 +0200 Subject: nfsd: Push mnt_want_write() outside of i_mutex When mnt_want_write() starts to handle freezing it will get a full lock semantics requiring proper lock ordering. So push mnt_want_write() call consistently outside of i_mutex. CC: linux-nfs@vger.kernel.org CC: "J. Bruce Fields" Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/nfsd/nfsfh.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index ce4743a26015..fa63048fecff 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -143,6 +143,7 @@ typedef struct svc_fh { int fh_maxsize; /* max size for fh_handle */ unsigned char fh_locked; /* inode locked by us */ + unsigned char fh_want_write; /* remount protection taken */ #ifdef CONFIG_NFSD_V3 unsigned char fh_post_saved; /* post-op attrs saved */ -- cgit v1.2.3 From f0476a83d61a8004eb535a0b65721ca405421fe8 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 26 Jul 2012 09:30:00 -0300 Subject: [media] V4L: Add capability flags for memory-to-memory devices This patch adds new V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE capability flags that are intended to be used for memory-to-memory (M2M) devices, instead of ORed V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT. V4L2_CAP_VIDEO_M2M flag is added at the drivers, CAPTURE and OUTPUT capability flags are left untouched and will be removed in future, after a transition period required for existing applications to be adapted to check only for V4L2_CAP_VIDEO_M2M. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Kamil Debski Acked-by: Andrzej Pietrasiewicz Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5d78910f926c..4cf766e6f120 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -274,6 +274,10 @@ struct v4l2_capability { #define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000 /* Is a video output device that supports multiplanar formats */ #define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000 +/* Is a video mem-to-mem device that supports multiplanar formats */ +#define V4L2_CAP_VIDEO_M2M_MPLANE 0x00004000 +/* Is a video mem-to-mem device */ +#define V4L2_CAP_VIDEO_M2M 0x00008000 #define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ #define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ -- cgit v1.2.3 From ab7017a3a0a64b953e091619c30413b3721d925d Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Mon, 30 Jul 2012 16:05:16 -0400 Subject: NFS: Add version registering framework This patch adds in the code to track multiple versions of the NFS protocol. I created default structures for v2, v3 and v4 so that each version can continue to work while I convert them into kernel modules. I also removed the const parameter from the rpc_version array so that I can change it at runtime. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_fs_sb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 65327652c61a..6039297801f4 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -48,6 +48,7 @@ struct nfs_client { struct rpc_clnt * cl_rpcclient; const struct nfs_rpc_ops *rpc_ops; /* NFS protocol vector */ int cl_proto; /* Network transport protocol */ + struct nfs_subversion * cl_nfs_mod; /* pointer to nfs version module */ u32 cl_minorversion;/* NFSv4 minorversion */ struct rpc_cred *cl_machine_cred; -- cgit v1.2.3 From ff9099f26645818563c8d396a154c2ce6ee422eb Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Mon, 30 Jul 2012 16:05:18 -0400 Subject: NFS: Create a try_mount rpc op I'm already looking up the nfs subversion in nfs_fs_mount(), so I have easy access to rpc_ops that used to be difficult to reach. This allows me to set up a different mount path for NFS v2/3 and NFS v4. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 0e181c2320b7..bc7415baf44d 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1353,6 +1353,8 @@ struct nfs_renamedata { struct nfs_access_entry; struct nfs_client; struct rpc_timeout; +struct nfs_subversion; +struct nfs_mount_info; struct nfs_client_initdata; struct nfs_pageio_descriptor; @@ -1370,6 +1372,8 @@ struct nfs_rpc_ops { struct nfs_fsinfo *); struct vfsmount *(*submount) (struct nfs_server *, struct dentry *, struct nfs_fh *, struct nfs_fattr *); + struct dentry *(*try_mount) (int, const char *, struct nfs_mount_info *, + struct nfs_subversion *); int (*getattr) (struct nfs_server *, struct nfs_fh *, struct nfs_fattr *); int (*setattr) (struct dentry *, struct nfs_fattr *, -- cgit v1.2.3 From 1179acc6a3e260bc4edc74fa94f6c7908290eaec Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Mon, 30 Jul 2012 16:05:19 -0400 Subject: NFS: Only initialize the ACL client in the v3 case v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to initialize the ACL client only when we are using v3. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index bc7415baf44d..631182062994 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1439,6 +1439,9 @@ struct nfs_rpc_ops { (*init_client) (struct nfs_client *, const struct rpc_timeout *, const char *, rpc_authflavor_t); void (*free_client) (struct nfs_client *); + struct nfs_server *(*create_server)(struct nfs_mount_info *, struct nfs_subversion *); + struct nfs_server *(*clone_server)(struct nfs_server *, struct nfs_fh *, + struct nfs_fattr *, rpc_authflavor_t); }; /* -- cgit v1.2.3 From 89d77c8fa8e6d1cb7e2cce95b428be30ddcc6f23 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Mon, 30 Jul 2012 16:05:25 -0400 Subject: NFS: Convert v4 into a module This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 6 +++--- include/linux/nfs_fs_sb.h | 6 +++--- include/linux/nfs_idmap.h | 2 +- include/linux/nfs_xdr.h | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 4b6043c20f77..2889877318bc 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -191,7 +191,7 @@ struct nfs_inode { struct hlist_head silly_list; wait_queue_head_t waitqueue; -#ifdef CONFIG_NFS_V4 +#if IS_ENABLED(CONFIG_NFS_V4) struct nfs4_cached_acl *nfs4_acl; /* NFSv4 state */ struct list_head open_states; @@ -428,7 +428,7 @@ extern __be32 root_nfs_parse_addr(char *name); /*__init*/ * linux/fs/nfs/file.c */ extern const struct file_operations nfs_file_operations; -#ifdef CONFIG_NFS_V4 +#if IS_ENABLED(CONFIG_NFS_V4) extern const struct file_operations nfs4_file_operations; #endif /* CONFIG_NFS_V4 */ extern const struct address_space_operations nfs_file_aops; @@ -538,7 +538,7 @@ extern void nfs_writeback_done(struct rpc_task *, struct nfs_write_data *); extern int nfs_wb_all(struct inode *inode); extern int nfs_wb_page(struct inode *inode, struct page* page); extern int nfs_wb_page_cancel(struct inode *inode, struct page* page); -#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4) +#if IS_ENABLED(CONFIG_NFS_V3) || IS_ENABLED(CONFIG_NFS_V4) extern int nfs_commit_inode(struct inode *, int); extern struct nfs_commit_data *nfs_commitdata_alloc(void); extern void nfs_commit_free(struct nfs_commit_data *data); diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 6039297801f4..310c63c8ab2c 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -53,7 +53,7 @@ struct nfs_client { u32 cl_minorversion;/* NFSv4 minorversion */ struct rpc_cred *cl_machine_cred; -#ifdef CONFIG_NFS_V4 +#if IS_ENABLED(CONFIG_NFS_V4) u64 cl_clientid; /* constant */ nfs4_verifier cl_confirm; /* Clientid verifier */ unsigned long cl_state; @@ -138,7 +138,7 @@ struct nfs_server { #endif u32 pnfs_blksize; /* layout_blksize attr */ -#ifdef CONFIG_NFS_V4 +#if IS_ENABLED(CONFIG_NFS_V4) u32 attr_bitmask[3];/* V4 bitmask representing the set of attributes supported on this filesystem */ @@ -201,7 +201,7 @@ struct nfs_server { #define NFS4_MAX_SLOT_TABLE (256U) #define NFS4_NO_SLOT ((u32)-1) -#if defined(CONFIG_NFS_V4) +#if IS_ENABLED(CONFIG_NFS_V4) /* Sessions */ #define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long)) diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index 7eed2012d288..ece91c57ad79 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -69,7 +69,7 @@ struct nfs_server; struct nfs_fattr; struct nfs4_string; -#ifdef CONFIG_NFS_V4 +#if IS_ENABLED(CONFIG_NFS_V4) int nfs_idmap_init(void); void nfs_idmap_quit(void); #else diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 631182062994..00485e084394 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -824,7 +824,7 @@ struct nfs3_getaclres { struct posix_acl * acl_default; }; -#ifdef CONFIG_NFS_V4 +#if IS_ENABLED(CONFIG_NFS_V4) typedef u64 clientid4; -- cgit v1.2.3 From 3d687b49ff085b325488e7aeb2ee4df99dd7ca6e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 5 Jul 2012 06:04:04 -0300 Subject: [media] videodev2.h: add VIDIOC_ENUM_FREQ_BANDS Add a new ioctl to enumerate the supported frequency bands of a tuner. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 4cf766e6f120..63c950f6fcc2 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -2032,6 +2032,7 @@ struct v4l2_modulator { #define V4L2_TUNER_CAP_RDS 0x0080 #define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100 #define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 +#define V4L2_TUNER_CAP_FREQ_BANDS 0x0400 /* Flags for the 'rxsubchans' field */ #define V4L2_TUNER_SUB_MONO 0x0001 @@ -2050,19 +2051,34 @@ struct v4l2_modulator { #define V4L2_TUNER_MODE_LANG1_LANG2 0x0004 struct v4l2_frequency { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 frequency; - __u32 reserved[8]; + __u32 tuner; + __u32 type; /* enum v4l2_tuner_type */ + __u32 frequency; + __u32 reserved[8]; +}; + +#define V4L2_BAND_MODULATION_VSB (1 << 1) +#define V4L2_BAND_MODULATION_FM (1 << 2) +#define V4L2_BAND_MODULATION_AM (1 << 3) + +struct v4l2_frequency_band { + __u32 tuner; + __u32 type; /* enum v4l2_tuner_type */ + __u32 index; + __u32 capability; + __u32 rangelow; + __u32 rangehigh; + __u32 modulation; + __u32 reserved[9]; }; struct v4l2_hw_freq_seek { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 seek_upward; - __u32 wrap_around; - __u32 spacing; - __u32 reserved[7]; + __u32 tuner; + __u32 type; /* enum v4l2_tuner_type */ + __u32 seek_upward; + __u32 wrap_around; + __u32 spacing; + __u32 reserved[7]; }; /* @@ -2630,6 +2646,10 @@ struct v4l2_create_buffers { #define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings) #define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap) +/* Experimental, this ioctl may change over the next couple of kernel + versions. */ +#define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ -- cgit v1.2.3 From e0a9b1770bac048171961625875aaf15118a7ae9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 12 Jul 2012 16:55:45 -0300 Subject: [media] v4l2: Add rangelow and rangehigh fields to the v4l2_hw_freq_seek struct To allow apps to limit a hw-freq-seek to a specific band, for further info see the documentation this patch adds for these new fields. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 63c950f6fcc2..7a147c8299ab 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -2033,6 +2033,7 @@ struct v4l2_modulator { #define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100 #define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 #define V4L2_TUNER_CAP_FREQ_BANDS 0x0400 +#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800 /* Flags for the 'rxsubchans' field */ #define V4L2_TUNER_SUB_MONO 0x0001 @@ -2078,7 +2079,9 @@ struct v4l2_hw_freq_seek { __u32 seek_upward; __u32 wrap_around; __u32 spacing; - __u32 reserved[7]; + __u32 rangelow; + __u32 rangehigh; + __u32 reserved[5]; }; /* -- cgit v1.2.3 From 1fe60e51a3744528f3939b1b1167ca909133d9ae Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Mon, 30 Jul 2012 16:23:22 -0700 Subject: libceph: move feature bits to separate header This is simply cleanup that will keep things more closely synced with the userland code. Signed-off-by: Sage Weil Reviewed-by: Alex Elder Reviewed-by: Yehuda Sadeh --- include/linux/ceph/ceph_features.h | 24 ++++++++++++++++++++++++ include/linux/ceph/ceph_fs.h | 14 -------------- include/linux/ceph/libceph.h | 6 ------ 3 files changed, 24 insertions(+), 20 deletions(-) create mode 100644 include/linux/ceph/ceph_features.h (limited to 'include/linux') diff --git a/include/linux/ceph/ceph_features.h b/include/linux/ceph/ceph_features.h new file mode 100644 index 000000000000..342f93dbe162 --- /dev/null +++ b/include/linux/ceph/ceph_features.h @@ -0,0 +1,24 @@ +#ifndef __CEPH_FEATURES +#define __CEPH_FEATURES + +/* + * feature bits + */ +#define CEPH_FEATURE_UID (1<<0) +#define CEPH_FEATURE_NOSRCADDR (1<<1) +#define CEPH_FEATURE_MONCLOCKCHECK (1<<2) +#define CEPH_FEATURE_FLOCK (1<<3) +#define CEPH_FEATURE_SUBSCRIBE2 (1<<4) +#define CEPH_FEATURE_MONNAMES (1<<5) +#define CEPH_FEATURE_RECONNECT_SEQ (1<<6) +#define CEPH_FEATURE_DIRLAYOUTHASH (1<<7) + +/* + * Features supported. + */ +#define CEPH_FEATURES_SUPPORTED_DEFAULT \ + (CEPH_FEATURE_NOSRCADDR) + +#define CEPH_FEATURES_REQUIRED_DEFAULT \ + (CEPH_FEATURE_NOSRCADDR) +#endif diff --git a/include/linux/ceph/ceph_fs.h b/include/linux/ceph/ceph_fs.h index e81ab30d4896..d021610efd65 100644 --- a/include/linux/ceph/ceph_fs.h +++ b/include/linux/ceph/ceph_fs.h @@ -35,20 +35,6 @@ /* arbitrary limit on max # of monitors (cluster of 3 is typical) */ #define CEPH_MAX_MON 31 - -/* - * feature bits - */ -#define CEPH_FEATURE_UID (1<<0) -#define CEPH_FEATURE_NOSRCADDR (1<<1) -#define CEPH_FEATURE_MONCLOCKCHECK (1<<2) -#define CEPH_FEATURE_FLOCK (1<<3) -#define CEPH_FEATURE_SUBSCRIBE2 (1<<4) -#define CEPH_FEATURE_MONNAMES (1<<5) -#define CEPH_FEATURE_RECONNECT_SEQ (1<<6) -#define CEPH_FEATURE_DIRLAYOUTHASH (1<<7) - - /* * ceph_file_layout - describe data layout for a file/inode */ diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 98ec36ae8a3b..ea072e1f9db9 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -22,12 +22,6 @@ #include "osd_client.h" #include "ceph_fs.h" -/* - * Supported features - */ -#define CEPH_FEATURE_SUPPORTED_DEFAULT CEPH_FEATURE_NOSRCADDR -#define CEPH_FEATURE_REQUIRED_DEFAULT CEPH_FEATURE_NOSRCADDR - /* * mount options */ -- cgit v1.2.3 From 54b501992dd2a839e94e76aa392c392b55080ce8 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 30 Jul 2012 14:39:18 -0700 Subject: coredump: warn about unsafe suid_dumpable / core_pattern combo When suid_dumpable=2, detect unsafe core_pattern settings and warn when they are seen. Signed-off-by: Kees Cook Suggested-by: Andrew Morton Cc: Alexander Viro Cc: Alan Cox Cc: "Eric W. Biederman" Cc: Doug Ledford Cc: Serge Hallyn Cc: James Morris Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index a721cef7e2d4..1e26a5e45aa6 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -406,6 +406,11 @@ static inline void arch_pick_mmap_layout(struct mm_struct *mm) {} extern void set_dumpable(struct mm_struct *mm, int value); extern int get_dumpable(struct mm_struct *mm); +/* get/set_dumpable() values */ +#define SUID_DUMPABLE_DISABLED 0 +#define SUID_DUMPABLE_ENABLED 1 +#define SUID_DUMPABLE_SAFE 2 + /* mm flags */ /* dumpable bits */ #define MMF_DUMPABLE 0 /* core dump is permitted */ -- cgit v1.2.3 From 93abe8e4b13ae9a0428ce940a8a03ac72a7626f1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 30 Jul 2012 14:39:27 -0700 Subject: clk: add non CONFIG_HAVE_CLK routines Many drivers are shared between architectures that may or may not have HAVE_CLK selected for them. To remove compilation errors for them we enclose clk_*() calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif. This patch removes the need of these CONFIG_HAVE_CLK statements, by introducing dummy routines when HAVE_CLK is not selected by platforms. So, definition of these routines will always be available. These calls will return error for platforms that don't select HAVE_CLK. Signed-off-by: Viresh Kumar Cc: Wolfram Sang Cc: Greg Kroah-Hartman Cc: Jeff Garzik Cc: Andrew Lunn Cc: Bhupesh Sharma Cc: Giuseppe Cavallaro Cc: Russell King Cc: Mike Turquette Cc: Sergei Shtylyov Cc: viresh kumar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/clk.h | 168 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 109 insertions(+), 59 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk.h b/include/linux/clk.h index 2fd6a4234531..b3ac22d0fc1f 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -84,6 +84,43 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); #endif +/** + * clk_prepare - prepare a clock source + * @clk: clock source + * + * This prepares the clock source for use. + * + * Must not be called from within atomic context. + */ +#ifdef CONFIG_HAVE_CLK_PREPARE +int clk_prepare(struct clk *clk); +#else +static inline int clk_prepare(struct clk *clk) +{ + might_sleep(); + return 0; +} +#endif + +/** + * clk_unprepare - undo preparation of a clock source + * @clk: clock source + * + * This undoes a previously prepared clock. The caller must balance + * the number of prepare and unprepare calls. + * + * Must not be called from within atomic context. + */ +#ifdef CONFIG_HAVE_CLK_PREPARE +void clk_unprepare(struct clk *clk); +#else +static inline void clk_unprepare(struct clk *clk) +{ + might_sleep(); +} +#endif + +#ifdef CONFIG_HAVE_CLK /** * clk_get - lookup and obtain a reference to a clock producer. * @dev: device for clock "consumer" @@ -121,24 +158,6 @@ struct clk *clk_get(struct device *dev, const char *id); */ struct clk *devm_clk_get(struct device *dev, const char *id); -/** - * clk_prepare - prepare a clock source - * @clk: clock source - * - * This prepares the clock source for use. - * - * Must not be called from within atomic context. - */ -#ifdef CONFIG_HAVE_CLK_PREPARE -int clk_prepare(struct clk *clk); -#else -static inline int clk_prepare(struct clk *clk) -{ - might_sleep(); - return 0; -} -#endif - /** * clk_enable - inform the system when the clock source should be running. * @clk: clock source @@ -167,47 +186,6 @@ int clk_enable(struct clk *clk); */ void clk_disable(struct clk *clk); - -/** - * clk_unprepare - undo preparation of a clock source - * @clk: clock source - * - * This undoes a previously prepared clock. The caller must balance - * the number of prepare and unprepare calls. - * - * Must not be called from within atomic context. - */ -#ifdef CONFIG_HAVE_CLK_PREPARE -void clk_unprepare(struct clk *clk); -#else -static inline void clk_unprepare(struct clk *clk) -{ - might_sleep(); -} -#endif - -/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */ -static inline int clk_prepare_enable(struct clk *clk) -{ - int ret; - - ret = clk_prepare(clk); - if (ret) - return ret; - ret = clk_enable(clk); - if (ret) - clk_unprepare(clk); - - return ret; -} - -/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */ -static inline void clk_disable_unprepare(struct clk *clk) -{ - clk_disable(clk); - clk_unprepare(clk); -} - /** * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. * This is only valid once the clock source has been enabled. @@ -298,6 +276,78 @@ struct clk *clk_get_parent(struct clk *clk); */ struct clk *clk_get_sys(const char *dev_id, const char *con_id); +#else /* !CONFIG_HAVE_CLK */ + +static inline struct clk *clk_get(struct device *dev, const char *id) +{ + return NULL; +} + +static inline struct clk *devm_clk_get(struct device *dev, const char *id) +{ + return NULL; +} + +static inline void clk_put(struct clk *clk) {} + +static inline void devm_clk_put(struct device *dev, struct clk *clk) {} + +static inline int clk_enable(struct clk *clk) +{ + return 0; +} + +static inline void clk_disable(struct clk *clk) {} + +static inline unsigned long clk_get_rate(struct clk *clk) +{ + return 0; +} + +static inline int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} + +static inline long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} + +static inline int clk_set_parent(struct clk *clk, struct clk *parent) +{ + return 0; +} + +static inline struct clk *clk_get_parent(struct clk *clk) +{ + return NULL; +} + +#endif + +/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */ +static inline int clk_prepare_enable(struct clk *clk) +{ + int ret; + + ret = clk_prepare(clk); + if (ret) + return ret; + ret = clk_enable(clk); + if (ret) + clk_unprepare(clk); + + return ret; +} + +/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */ +static inline void clk_disable_unprepare(struct clk *clk) +{ + clk_disable(clk); + clk_unprepare(clk); +} + /** * clk_add_alias - add a new clock alias * @alias: name for clock alias -- cgit v1.2.3 From 714904e1c3f48b17ceff06b827485f8b1b5d8a91 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 30 Jul 2012 14:39:32 -0700 Subject: usb/marvell: remove conditional compilation of clk code With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. Marvell usb also has these dummy macros defined locally. Remove them as they aren't required anymore. Signed-off-by: Viresh Kumar Cc: Greg Kroah-Hartman Cc: Russell King Cc: Mike Turquette Cc: Sergei Shtylyov Cc: viresh kumar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/platform_data/mv_usb.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index d94804aca764..944b01dd103e 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -52,13 +52,4 @@ struct mv_usb_platform_data { int (*set_vbus)(unsigned int vbus); int (*private_init)(void __iomem *opregs, void __iomem *phyregs); }; - -#ifndef CONFIG_HAVE_CLK -/* Dummy stub for clk framework */ -#define clk_get(dev, id) NULL -#define clk_put(clock) do {} while (0) -#define clk_enable(clock) do {} while (0) -#define clk_disable(clock) do {} while (0) -#endif - #endif -- cgit v1.2.3 From 45226e944ce071d0231949f2fea90969437cd2dc Mon Sep 17 00:00:00 2001 From: Sameer Nanda Date: Mon, 30 Jul 2012 14:40:00 -0700 Subject: NMI watchdog: fix for lockup detector breakage on resume On the suspend/resume path the boot CPU does not go though an offline->online transition. This breaks the NMI detector post-resume since it depends on PMU state that is lost when the system gets suspended. Fix this by forcing a CPU offline->online transition for the lockup detector on the boot CPU during resume. To provide more context, we enable NMI watchdog on Chrome OS. We have seen several reports of systems freezing up completely which indicated that the NMI watchdog was not firing for some reason. Debugging further, we found a simple way of repro'ing system freezes -- issuing the command 'tasket 1 sh -c "echo nmilockup > /proc/breakme"' after the system has been suspended/resumed one or more times. With this patch in place, the system freeze result in panics, as expected. These panics provide a nice stack trace for us to debug the actual issue causing the freeze. [akpm@linux-foundation.org: fiddle with code comment] [akpm@linux-foundation.org: make lockup_detector_bootcpu_resume() conditional on CONFIG_SUSPEND] [akpm@linux-foundation.org: fix section errors] Signed-off-by: Sameer Nanda Cc: Ingo Molnar Cc: Peter Zijlstra Cc: "Rafael J. Wysocki" Cc: Don Zickus Cc: Mandeep Singh Baines Cc: Srivatsa S. Bhat Cc: Anshuman Khandual Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 1e26a5e45aa6..68dcffaa62a0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -334,6 +334,14 @@ static inline void lockup_detector_init(void) } #endif +#if defined(CONFIG_LOCKUP_DETECTOR) && defined(CONFIG_SUSPEND) +void lockup_detector_bootcpu_resume(void); +#else +static inline void lockup_detector_bootcpu_resume(void) +{ +} +#endif + #ifdef CONFIG_DETECT_HUNG_TASK extern unsigned int sysctl_hung_task_panic; extern unsigned long sysctl_hung_task_check_count; -- cgit v1.2.3 From acc8fa41ad31c576cdbc569cc3e0e443b1b98b44 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 30 Jul 2012 14:40:09 -0700 Subject: printk: add generic functions to find KERN_ headers The current form of a KERN_ is "<.>". Add printk_get_level and printk_skip_level functions to handle these formats. These functions centralize tests of KERN_ so a future modification can change the KERN_ style and shorten the number of bytes consumed by these headers. [akpm@linux-foundation.org: fix build error and warning] Signed-off-by: Joe Perches Cc: Kay Sievers Cc: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/printk.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include/linux') diff --git a/include/linux/printk.h b/include/linux/printk.h index 1bec2f7a2d42..6e12e1f09047 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -24,6 +24,32 @@ extern const char linux_proc_banner[]; */ #define KERN_CONT "" +static inline int printk_get_level(const char *buffer) +{ + if (buffer[0] == '<' && buffer[1] && buffer[2] == '>') { + switch (buffer[1]) { + case '0' ... '7': + case 'd': /* KERN_DEFAULT */ + case 'c': /* KERN_CONT */ + return buffer[1]; + } + } + return 0; +} + +static inline const char *printk_skip_level(const char *buffer) +{ + if (printk_get_level(buffer)) { + switch (buffer[1]) { + case '0' ... '7': + case 'd': /* KERN_DEFAULT */ + case 'c': /* KERN_CONT */ + return buffer + 3; + } + } + return buffer; +} + extern int console_printk[]; #define console_loglevel (console_printk[0]) -- cgit v1.2.3 From 314ba3520e513a78be80e8c2ddbd65c91e78a114 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 30 Jul 2012 14:40:11 -0700 Subject: printk: add kern_levels.h to make KERN_ available for asm use Separate the printk.h file into 2 pieces so the definitions can be used in asm files. Signed-off-by: Joe Perches Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kern_levels.h | 22 ++++++++++++++++++++++ include/linux/printk.h | 19 +------------------ 2 files changed, 23 insertions(+), 18 deletions(-) create mode 100644 include/linux/kern_levels.h (limited to 'include/linux') diff --git a/include/linux/kern_levels.h b/include/linux/kern_levels.h new file mode 100644 index 000000000000..337e56ff5332 --- /dev/null +++ b/include/linux/kern_levels.h @@ -0,0 +1,22 @@ +#ifndef __KERN_LEVELS_H__ +#define __KERN_LEVELS_H__ + +#define KERN_EMERG "<0>" /* system is unusable */ +#define KERN_ALERT "<1>" /* action must be taken immediately */ +#define KERN_CRIT "<2>" /* critical conditions */ +#define KERN_ERR "<3>" /* error conditions */ +#define KERN_WARNING "<4>" /* warning conditions */ +#define KERN_NOTICE "<5>" /* normal but significant condition */ +#define KERN_INFO "<6>" /* informational */ +#define KERN_DEBUG "<7>" /* debug-level messages */ + +/* Use the default kernel loglevel */ +#define KERN_DEFAULT "" +/* + * Annotation for a "continued" line of log printout (only done after a + * line that had no enclosing \n). Only to be used by core/arch code + * during early bootup (a continued line is not SMP-safe otherwise). + */ +#define KERN_CONT "" + +#endif diff --git a/include/linux/printk.h b/include/linux/printk.h index 6e12e1f09047..fea2de37b645 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -2,28 +2,11 @@ #define __KERNEL_PRINTK__ #include +#include extern const char linux_banner[]; extern const char linux_proc_banner[]; -#define KERN_EMERG "<0>" /* system is unusable */ -#define KERN_ALERT "<1>" /* action must be taken immediately */ -#define KERN_CRIT "<2>" /* critical conditions */ -#define KERN_ERR "<3>" /* error conditions */ -#define KERN_WARNING "<4>" /* warning conditions */ -#define KERN_NOTICE "<5>" /* normal but significant condition */ -#define KERN_INFO "<6>" /* informational */ -#define KERN_DEBUG "<7>" /* debug-level messages */ - -/* Use the default kernel loglevel */ -#define KERN_DEFAULT "" -/* - * Annotation for a "continued" line of log printout (only done after a - * line that had no enclosing \n). Only to be used by core/arch code - * during early bootup (a continued line is not SMP-safe otherwise). - */ -#define KERN_CONT "" - static inline int printk_get_level(const char *buffer) { if (buffer[0] == '<' && buffer[1] && buffer[2] == '>') { -- cgit v1.2.3 From 04d2c8c83d0e3ac5f78aeede51babb3236200112 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 30 Jul 2012 14:40:17 -0700 Subject: printk: convert the format for KERN_ to a 2 byte pattern Instead of "<.>", use an ASCII SOH for the KERN_ prefix initiator. This saves 1 byte per printk, thousands of bytes in a normal kernel. No output changes are produced as vprintk_emit converts these uses to "<.>". Signed-off-by: Joe Perches Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kern_levels.h | 25 ++++++++++++++----------- include/linux/printk.h | 4 ++-- 2 files changed, 16 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kern_levels.h b/include/linux/kern_levels.h index 337e56ff5332..8c719a955b5b 100644 --- a/include/linux/kern_levels.h +++ b/include/linux/kern_levels.h @@ -1,22 +1,25 @@ #ifndef __KERN_LEVELS_H__ #define __KERN_LEVELS_H__ -#define KERN_EMERG "<0>" /* system is unusable */ -#define KERN_ALERT "<1>" /* action must be taken immediately */ -#define KERN_CRIT "<2>" /* critical conditions */ -#define KERN_ERR "<3>" /* error conditions */ -#define KERN_WARNING "<4>" /* warning conditions */ -#define KERN_NOTICE "<5>" /* normal but significant condition */ -#define KERN_INFO "<6>" /* informational */ -#define KERN_DEBUG "<7>" /* debug-level messages */ +#define KERN_SOH "\001" /* ASCII Start Of Header */ +#define KERN_SOH_ASCII '\001' + +#define KERN_EMERG KERN_SOH "0" /* system is unusable */ +#define KERN_ALERT KERN_SOH "1" /* action must be taken immediately */ +#define KERN_CRIT KERN_SOH "2" /* critical conditions */ +#define KERN_ERR KERN_SOH "3" /* error conditions */ +#define KERN_WARNING KERN_SOH "4" /* warning conditions */ +#define KERN_NOTICE KERN_SOH "5" /* normal but significant condition */ +#define KERN_INFO KERN_SOH "6" /* informational */ +#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */ + +#define KERN_DEFAULT KERN_SOH "d" /* the default kernel loglevel */ -/* Use the default kernel loglevel */ -#define KERN_DEFAULT "" /* * Annotation for a "continued" line of log printout (only done after a * line that had no enclosing \n). Only to be used by core/arch code * during early bootup (a continued line is not SMP-safe otherwise). */ -#define KERN_CONT "" +#define KERN_CONT KERN_SOH "c" #endif diff --git a/include/linux/printk.h b/include/linux/printk.h index fea2de37b645..93a231f9835c 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -9,7 +9,7 @@ extern const char linux_proc_banner[]; static inline int printk_get_level(const char *buffer) { - if (buffer[0] == '<' && buffer[1] && buffer[2] == '>') { + if (buffer[0] == KERN_SOH_ASCII && buffer[1]) { switch (buffer[1]) { case '0' ... '7': case 'd': /* KERN_DEFAULT */ @@ -27,7 +27,7 @@ static inline const char *printk_skip_level(const char *buffer) case '0' ... '7': case 'd': /* KERN_DEFAULT */ case 'c': /* KERN_CONT */ - return buffer + 3; + return buffer + 2; } } return buffer; -- cgit v1.2.3 From 61e99ab8e35a88b8c4d0f80d3df9ee16df471be5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 30 Jul 2012 14:40:21 -0700 Subject: printk: remove the now unnecessary "C" annotation for KERN_CONT Now that all KERN_ uses are prefixed with ASCII SOH, there is no need for a KERN_CONT. Keep it backward compatible by adding #define KERN_CONT "" Reduces kernel image size a thousand bytes. Signed-off-by: Joe Perches Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kern_levels.h | 2 +- include/linux/printk.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kern_levels.h b/include/linux/kern_levels.h index 8c719a955b5b..866caaa9e2bb 100644 --- a/include/linux/kern_levels.h +++ b/include/linux/kern_levels.h @@ -20,6 +20,6 @@ * line that had no enclosing \n). Only to be used by core/arch code * during early bootup (a continued line is not SMP-safe otherwise). */ -#define KERN_CONT KERN_SOH "c" +#define KERN_CONT "" #endif diff --git a/include/linux/printk.h b/include/linux/printk.h index 93a231f9835c..9afc01e5a0a6 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -13,7 +13,6 @@ static inline int printk_get_level(const char *buffer) switch (buffer[1]) { case '0' ... '7': case 'd': /* KERN_DEFAULT */ - case 'c': /* KERN_CONT */ return buffer[1]; } } @@ -26,7 +25,6 @@ static inline const char *printk_skip_level(const char *buffer) switch (buffer[1]) { case '0' ... '7': case 'd': /* KERN_DEFAULT */ - case 'c': /* KERN_CONT */ return buffer + 2; } } -- cgit v1.2.3 From a1fcb2e31822c0617c6e274de4af2a2bb5dc7d3f Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Mon, 30 Jul 2012 14:40:50 -0700 Subject: backlight: move register definitions from header to source ROM boundary definitions do not need to be exported because these are used only internally in the lp855x driver. And few code cosmetic changes Signed-off-by: Milo(Woogyom) Kim Cc: Richard Purdie Cc: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lp855x.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h index 781a490a451b..cc76f1f18f18 100644 --- a/include/linux/lp855x.h +++ b/include/linux/lp855x.h @@ -47,12 +47,6 @@ (LP8556_I2C_ONLY << BRT_MODE_SHFT)) #define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) -/* ROM area boundary */ -#define EEPROM_START (0xA0) -#define EEPROM_END (0xA7) -#define EPROM_START (0xA0) -#define EPROM_END (0xAF) - enum lp855x_chip_id { LP8550, LP8551, -- cgit v1.2.3 From f7f95056779eb69c5fc3ac30e5cb6fd28bdbba43 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Mon, 30 Jul 2012 14:40:53 -0700 Subject: backlight: move lp855x header into platform_data directory The lp855x header is used only in the platform side, so it can be moved into platform_data directory Signed-off-by: Milo(Woogyom) Kim Cc: Richard Purdie Cc: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lp855x.h | 125 ----------------------------------- include/linux/platform_data/lp855x.h | 125 +++++++++++++++++++++++++++++++++++ 2 files changed, 125 insertions(+), 125 deletions(-) delete mode 100644 include/linux/lp855x.h create mode 100644 include/linux/platform_data/lp855x.h (limited to 'include/linux') diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h deleted file mode 100644 index cc76f1f18f18..000000000000 --- a/include/linux/lp855x.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * LP855x Backlight Driver - * - * Copyright (C) 2011 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _LP855X_H -#define _LP855X_H - -#define BL_CTL_SHFT (0) -#define BRT_MODE_SHFT (1) -#define BRT_MODE_MASK (0x06) - -/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */ -#define ENABLE_BL (1) -#define DISABLE_BL (0) - -#define I2C_CONFIG(id) id ## _I2C_CONFIG -#define PWM_CONFIG(id) id ## _PWM_CONFIG - -/* DEVICE CONTROL register - LP8550 */ -#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT) -#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ - (LP8550_I2C_ONLY << BRT_MODE_SHFT)) - -/* DEVICE CONTROL register - LP8551 */ -#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG -#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG - -/* DEVICE CONTROL register - LP8552 */ -#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG -#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG - -/* DEVICE CONTROL register - LP8553 */ -#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG -#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG - -/* DEVICE CONTROL register - LP8556 */ -#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) -#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) -#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ - (LP8556_I2C_ONLY << BRT_MODE_SHFT)) -#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) - -enum lp855x_chip_id { - LP8550, - LP8551, - LP8552, - LP8553, - LP8556, -}; - -enum lp855x_brightness_ctrl_mode { - PWM_BASED = 1, - REGISTER_BASED, -}; - -enum lp8550_brighntess_source { - LP8550_PWM_ONLY, - LP8550_I2C_ONLY = 2, -}; - -enum lp8551_brighntess_source { - LP8551_PWM_ONLY = LP8550_PWM_ONLY, - LP8551_I2C_ONLY = LP8550_I2C_ONLY, -}; - -enum lp8552_brighntess_source { - LP8552_PWM_ONLY = LP8550_PWM_ONLY, - LP8552_I2C_ONLY = LP8550_I2C_ONLY, -}; - -enum lp8553_brighntess_source { - LP8553_PWM_ONLY = LP8550_PWM_ONLY, - LP8553_I2C_ONLY = LP8550_I2C_ONLY, -}; - -enum lp8556_brightness_source { - LP8556_PWM_ONLY, - LP8556_COMBINED1, /* pwm + i2c before the shaper block */ - LP8556_I2C_ONLY, - LP8556_COMBINED2, /* pwm + i2c after the shaper block */ -}; - -struct lp855x_pwm_data { - void (*pwm_set_intensity) (int brightness, int max_brightness); - int (*pwm_get_intensity) (int max_brightness); -}; - -struct lp855x_rom_data { - u8 addr; - u8 val; -}; - -/** - * struct lp855x_platform_data - * @name : Backlight driver name. If it is not defined, default name is set. - * @mode : brightness control by pwm or lp855x register - * @device_control : value of DEVICE CONTROL register - * @initial_brightness : initial value of backlight brightness - * @pwm_data : platform specific pwm generation functions. - Only valid when mode is PWM_BASED. - * @load_new_rom_data : - 0 : use default configuration data - 1 : update values of eeprom or eprom registers on loading driver - * @size_program : total size of lp855x_rom_data - * @rom_data : list of new eeprom/eprom registers - */ -struct lp855x_platform_data { - char *name; - enum lp855x_brightness_ctrl_mode mode; - u8 device_control; - int initial_brightness; - struct lp855x_pwm_data pwm_data; - u8 load_new_rom_data; - int size_program; - struct lp855x_rom_data *rom_data; -}; - -#endif diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h new file mode 100644 index 000000000000..cc76f1f18f18 --- /dev/null +++ b/include/linux/platform_data/lp855x.h @@ -0,0 +1,125 @@ +/* + * LP855x Backlight Driver + * + * Copyright (C) 2011 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP855X_H +#define _LP855X_H + +#define BL_CTL_SHFT (0) +#define BRT_MODE_SHFT (1) +#define BRT_MODE_MASK (0x06) + +/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */ +#define ENABLE_BL (1) +#define DISABLE_BL (0) + +#define I2C_CONFIG(id) id ## _I2C_CONFIG +#define PWM_CONFIG(id) id ## _PWM_CONFIG + +/* DEVICE CONTROL register - LP8550 */ +#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT) +#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8550_I2C_ONLY << BRT_MODE_SHFT)) + +/* DEVICE CONTROL register - LP8551 */ +#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8552 */ +#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8553 */ +#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8556 */ +#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) +#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) +#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8556_I2C_ONLY << BRT_MODE_SHFT)) +#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) + +enum lp855x_chip_id { + LP8550, + LP8551, + LP8552, + LP8553, + LP8556, +}; + +enum lp855x_brightness_ctrl_mode { + PWM_BASED = 1, + REGISTER_BASED, +}; + +enum lp8550_brighntess_source { + LP8550_PWM_ONLY, + LP8550_I2C_ONLY = 2, +}; + +enum lp8551_brighntess_source { + LP8551_PWM_ONLY = LP8550_PWM_ONLY, + LP8551_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8552_brighntess_source { + LP8552_PWM_ONLY = LP8550_PWM_ONLY, + LP8552_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8553_brighntess_source { + LP8553_PWM_ONLY = LP8550_PWM_ONLY, + LP8553_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8556_brightness_source { + LP8556_PWM_ONLY, + LP8556_COMBINED1, /* pwm + i2c before the shaper block */ + LP8556_I2C_ONLY, + LP8556_COMBINED2, /* pwm + i2c after the shaper block */ +}; + +struct lp855x_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + +struct lp855x_rom_data { + u8 addr; + u8 val; +}; + +/** + * struct lp855x_platform_data + * @name : Backlight driver name. If it is not defined, default name is set. + * @mode : brightness control by pwm or lp855x register + * @device_control : value of DEVICE CONTROL register + * @initial_brightness : initial value of backlight brightness + * @pwm_data : platform specific pwm generation functions. + Only valid when mode is PWM_BASED. + * @load_new_rom_data : + 0 : use default configuration data + 1 : update values of eeprom or eprom registers on loading driver + * @size_program : total size of lp855x_rom_data + * @rom_data : list of new eeprom/eprom registers + */ +struct lp855x_platform_data { + char *name; + enum lp855x_brightness_ctrl_mode mode; + u8 device_control; + int initial_brightness; + struct lp855x_pwm_data pwm_data; + u8 load_new_rom_data; + int size_program; + struct lp855x_rom_data *rom_data; +}; + +#endif -- cgit v1.2.3 From 639b9e34f15e4b2c30068a4e4485586af0cdf709 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 30 Jul 2012 14:40:55 -0700 Subject: string: introduce memweight() memweight() is the function that counts the total number of bits set in memory area. Unlike bitmap_weight(), memweight() takes pointer and size in bytes to specify a memory area which does not need to be aligned to long-word boundary. [akpm@linux-foundation.org: rename `w' to `ret'] Signed-off-by: Akinobu Mita Cc: Anders Larsen Cc: Alasdair Kergon Cc: Laurent Pinchart Cc: Mark Fasheh Cc: Joel Becker Cc: Jan Kara Cc: Andreas Dilger Cc: "Theodore Ts'o" Cc: Matthew Wilcox Cc: Mauro Carvalho Chehab Cc: Tony Luck Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/string.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/string.h b/include/linux/string.h index e033564f10ba..ffe0442e18d2 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -145,4 +145,7 @@ static inline bool strstarts(const char *str, const char *prefix) return strncmp(str, prefix, strlen(prefix)) == 0; } #endif + +extern size_t memweight(const void *ptr, size_t bytes); + #endif /* _LINUX_STRING_H_ */ -- cgit v1.2.3 From 8c74ac0557b4cabc9017c2740c5f62b330192416 Mon Sep 17 00:00:00 2001 From: Vyacheslav Dubeyko Date: Mon, 30 Jul 2012 14:42:09 -0700 Subject: nilfs2: add omitted comments for structures in nilfs2_fs.h Add omitted comments for structures in nilfs2_fs.h. Signed-off-by: Vyacheslav Dubeyko Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 63 +++++++++++++++++++++++++++++------------------ 1 file changed, 39 insertions(+), 24 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 89bd4a4dcfb4..98755767c7b0 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -293,7 +293,7 @@ struct nilfs_dir_entry { __le64 inode; /* Inode number */ __le16 rec_len; /* Directory entry length */ __u8 name_len; /* Name length */ - __u8 file_type; + __u8 file_type; /* Dir entry type (file, dir, etc) */ char name[NILFS_NAME_LEN]; /* File name */ char pad; }; @@ -395,7 +395,7 @@ union nilfs_binfo { }; /** - * struct nilfs_segment_summary - segment summary + * struct nilfs_segment_summary - segment summary header * @ss_datasum: checksum of data * @ss_sumsum: checksum of segment summary * @ss_magic: magic number @@ -683,9 +683,9 @@ struct nilfs_sufile_header { /** * nilfs_suinfo - segment usage information - * @sui_lastmod: - * @sui_nblocks: - * @sui_flags: + * @sui_lastmod: timestamp of last modification + * @sui_nblocks: number of written blocks in segment + * @sui_flags: segment usage flags */ struct nilfs_suinfo { __u64 sui_lastmod; @@ -716,9 +716,10 @@ enum { }; /** - * struct nilfs_cpmode - - * @cc_cno: - * @cc_mode: + * struct nilfs_cpmode - change checkpoint mode structure + * @cm_cno: checkpoint number + * @cm_mode: mode of checkpoint + * @cm_pad: padding */ struct nilfs_cpmode { __u64 cm_cno; @@ -728,11 +729,11 @@ struct nilfs_cpmode { /** * struct nilfs_argv - argument vector - * @v_base: - * @v_nmembs: - * @v_size: - * @v_flags: - * @v_index: + * @v_base: pointer on data array from userspace + * @v_nmembs: number of members in data array + * @v_size: size of data array in bytes + * @v_flags: flags + * @v_index: start number of target data items */ struct nilfs_argv { __u64 v_base; @@ -743,9 +744,9 @@ struct nilfs_argv { }; /** - * struct nilfs_period - - * @p_start: - * @p_end: + * struct nilfs_period - period of checkpoint numbers + * @p_start: start checkpoint number (inclusive) + * @p_end: end checkpoint number (exclusive) */ struct nilfs_period { __u64 p_start; @@ -753,7 +754,7 @@ struct nilfs_period { }; /** - * struct nilfs_cpstat - + * struct nilfs_cpstat - checkpoint statistics * @cs_cno: checkpoint number * @cs_ncps: number of checkpoints * @cs_nsss: number of snapshots @@ -765,7 +766,7 @@ struct nilfs_cpstat { }; /** - * struct nilfs_sustat - + * struct nilfs_sustat - segment usage statistics * @ss_nsegs: number of segments * @ss_ncleansegs: number of clean segments * @ss_ndirtysegs: number of dirty segments @@ -784,10 +785,10 @@ struct nilfs_sustat { /** * struct nilfs_vinfo - virtual block number information - * @vi_vblocknr: - * @vi_start: - * @vi_end: - * @vi_blocknr: + * @vi_vblocknr: virtual block number + * @vi_start: start checkpoint number (inclusive) + * @vi_end: end checkpoint number (exclusive) + * @vi_blocknr: disk block number */ struct nilfs_vinfo { __u64 vi_vblocknr; @@ -797,7 +798,15 @@ struct nilfs_vinfo { }; /** - * struct nilfs_vdesc - + * struct nilfs_vdesc - descriptor of virtual block number + * @vd_ino: inode number + * @vd_cno: checkpoint number + * @vd_vblocknr: virtual block number + * @vd_period: period of checkpoint numbers + * @vd_blocknr: disk block number + * @vd_offset: logical block offset inside a file + * @vd_flags: flags (data or node block) + * @vd_pad: padding */ struct nilfs_vdesc { __u64 vd_ino; @@ -811,7 +820,13 @@ struct nilfs_vdesc { }; /** - * struct nilfs_bdesc - + * struct nilfs_bdesc - descriptor of disk block number + * @bd_ino: inode number + * @bd_oblocknr: disk block address (for skipping dead blocks) + * @bd_blocknr: disk block address + * @bd_offset: logical block offset inside a file + * @bd_level: level in the b-tree organization + * @bd_pad: padding */ struct nilfs_bdesc { __u64 bd_ino; -- cgit v1.2.3 From 079a96ae3871f0ed9083aac2218136ccec5b9877 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 30 Jul 2012 14:42:38 -0700 Subject: ipc: add COMPAT_SHMLBA support If the SHMLBA definition for a native task differs from the definition for a compat task, the do_shmat() function would need to handle both. This patch introduces COMPAT_SHMLBA, which is used by the compat shmat syscall when calling the ipc code and allows architectures such as AArch64 (where the native SHMLBA is 64k but the compat (AArch32) definition is 16k) to provide the correct semantics for compat IPC system calls. Cc: David S. Miller Cc: Chris Zankel Cc: Arnd Bergmann Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/shm.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/shm.h b/include/linux/shm.h index 92808b86703b..edd086883ccb 100644 --- a/include/linux/shm.h +++ b/include/linux/shm.h @@ -107,12 +107,14 @@ struct shmid_kernel /* private to the kernel */ #define SHM_NORESERVE 010000 /* don't check for reservations */ #ifdef CONFIG_SYSVIPC -long do_shmat(int shmid, char __user *shmaddr, int shmflg, unsigned long *addr); +long do_shmat(int shmid, char __user *shmaddr, int shmflg, unsigned long *addr, + unsigned long shmlba); extern int is_file_shm_hugepages(struct file *file); extern void exit_shm(struct task_struct *task); #else static inline long do_shmat(int shmid, char __user *shmaddr, - int shmflg, unsigned long *addr) + int shmflg, unsigned long *addr, + unsigned long shmlba) { return -ENOSYS; } -- cgit v1.2.3 From b610c04c667f3c056243fd64041c7f152a512ee4 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 30 Jul 2012 14:42:40 -0700 Subject: ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC Commit 48b25c43e6ee ("ipc: provide generic compat versions of IPC syscalls") added a new ARCH_WANT_OLD_COMPAT_IPC config option for architectures to select if their compat target requires the old IPC syscall interface. For architectures (such as AArch64) that do not require the internal calling conventions provided by this option, but have a compat target where the C library passes the IPC_64 flag explicitly, compat_ipc_parse_version no longer strips out the flag before calling the native system call implementation, resulting in unknown SHM/IPC commands and -EINVAL being returned to userspace. This patch separates the selection of the internal calling conventions for the IPC syscalls from the version parsing, allowing architectures to select __ARCH_WANT_COMPAT_IPC_PARSE_VERSION if they want to use version parsing whilst retaining the newer syscall calling conventions. Acked-by: Chris Metcalf Cc: Arnd Bergmann Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compat.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/compat.h b/include/linux/compat.h index 4e890394ef99..9f68e90a14ec 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -256,6 +256,7 @@ compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr, compat_size_t __user *len_ptr); #ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC +#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION long compat_sys_semctl(int first, int second, int third, void __user *uptr); long compat_sys_msgsnd(int first, int second, int third, void __user *uptr); long compat_sys_msgrcv(int first, int second, int msgtyp, int third, -- cgit v1.2.3 From 05ba3f1aa1b04e921068249dd52a80bc84c2aeb4 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 30 Jul 2012 14:42:43 -0700 Subject: ipc: compat: use signed size_t types for msgsnd and msgrcv The msgsnd and msgrcv system calls use size_t to represent the size of the message being transferred. POSIX states that values of msgsz greater than SSIZE_MAX cause the result to be implementation-defined. On Linux, this equates to returning -EINVAL if (long) msgsz < 0. For compat tasks where !CONFIG_ARCH_WANT_OLD_COMPAT_IPC and compat_size_t is smaller than size_t, negative size values passed from userspace will be interpreted as positive values by do_msg{rcv,snd} and will fail to exit early with -EINVAL. This patch changes the compat prototypes for msg{rcv,snd} so that the message size is represented as a compat_ssize_t, which we cast to the native ssize_t type for the core IPC code. Cc: Arnd Bergmann Acked-by: Chris Metcalf Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compat.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/compat.h b/include/linux/compat.h index 9f68e90a14ec..f2b8fe20cc8e 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -266,9 +266,9 @@ long compat_sys_shmat(int first, int second, compat_uptr_t third, int version, #else long compat_sys_semctl(int semid, int semnum, int cmd, int arg); long compat_sys_msgsnd(int msqid, struct compat_msgbuf __user *msgp, - size_t msgsz, int msgflg); + compat_ssize_t msgsz, int msgflg); long compat_sys_msgrcv(int msqid, struct compat_msgbuf __user *msgp, - size_t msgsz, long msgtyp, int msgflg); + compat_ssize_t msgsz, long msgtyp, int msgflg); long compat_sys_shmat(int shmid, compat_uptr_t shmaddr, int shmflg); #endif long compat_sys_msgctl(int first, int second, void __user *uptr); -- cgit v1.2.3 From c1d7e01d7877a397655277a920aeaa3830ed9461 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 30 Jul 2012 14:42:46 -0700 Subject: ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton Signed-off-by: Will Deacon Cc: Arnd Bergmann Cc: Chris Metcalf Cc: Catalin Marinas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compat.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compat.h b/include/linux/compat.h index f2b8fe20cc8e..09b28b7369d7 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -256,7 +256,6 @@ compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr, compat_size_t __user *len_ptr); #ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC -#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION long compat_sys_semctl(int first, int second, int third, void __user *uptr); long compat_sys_msgsnd(int first, int second, int third, void __user *uptr); long compat_sys_msgrcv(int first, int second, int msgtyp, int third, -- cgit v1.2.3 From f7e1becb078c2b996420a61f2a411ef19335e2da Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 30 Jul 2012 14:42:56 -0700 Subject: include/linux/aio.h: cpp->C conversions Convert init_sync_kiocb() from a nasty macro into a nice C function. The struct assignment trick takes care of zeroing all unmentioned fields. Shrinks fs/read_write.o's .text from 9857 bytes to 9714. Also demacroize is_sync_kiocb() and aio_ring_avail(). The latter fixes an arg-referenced-multiple-times hand grenade. Cc: Junxiao Bi Cc: Mark Fasheh Acked-by: Jeff Moyer Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/aio.h | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/aio.h b/include/linux/aio.h index b1a520ec8b59..31ff6dba4872 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -126,22 +126,20 @@ struct kiocb { struct eventfd_ctx *ki_eventfd; }; -#define is_sync_kiocb(iocb) ((iocb)->ki_key == KIOCB_SYNC_KEY) -#define init_sync_kiocb(x, filp) \ - do { \ - struct task_struct *tsk = current; \ - (x)->ki_flags = 0; \ - (x)->ki_users = 1; \ - (x)->ki_key = KIOCB_SYNC_KEY; \ - (x)->ki_filp = (filp); \ - (x)->ki_ctx = NULL; \ - (x)->ki_cancel = NULL; \ - (x)->ki_retry = NULL; \ - (x)->ki_dtor = NULL; \ - (x)->ki_obj.tsk = tsk; \ - (x)->ki_user_data = 0; \ - (x)->private = NULL; \ - } while (0) +static inline bool is_sync_kiocb(struct kiocb *kiocb) +{ + return kiocb->ki_key == KIOCB_SYNC_KEY; +} + +static inline void init_sync_kiocb(struct kiocb *kiocb, struct file *filp) +{ + *kiocb = (struct kiocb) { + .ki_users = 1, + .ki_key = KIOCB_SYNC_KEY, + .ki_filp = filp, + .ki_obj.tsk = current, + }; +} #define AIO_RING_MAGIC 0xa10a10a1 #define AIO_RING_COMPAT_FEATURES 1 @@ -161,8 +159,6 @@ struct aio_ring { struct io_event io_events[0]; }; /* 128 bytes + ring size */ -#define aio_ring_avail(info, ring) (((ring)->head + (info)->nr - 1 - (ring)->tail) % (info)->nr) - #define AIO_RING_PAGES 8 struct aio_ring_info { unsigned long mmap_base; @@ -177,6 +173,12 @@ struct aio_ring_info { struct page *internal_pages[AIO_RING_PAGES]; }; +static inline unsigned aio_ring_avail(struct aio_ring_info *info, + struct aio_ring *ring) +{ + return (ring->head + info->nr - 1 - ring->tail) % info->nr; +} + struct kioctx { atomic_t users; int dead; -- cgit v1.2.3 From 546f04ef716dd49521774653d8b032a7d64c05d9 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Mon, 30 Jul 2012 18:15:23 -0700 Subject: libceph: support crush tunables The server side recently added support for tuning some magic crush variables. Decode these variables if they are present, or use the default values if they are not present. Corresponds to ceph.git commit 89af369c25f274fe62ef730e5e8aad0c54f1e5a5. Signed-off-by: caleb miles Reviewed-by: Sage Weil Reviewed-by: Alex Elder Reviewed-by: Yehuda Sadeh --- include/linux/ceph/ceph_features.h | 5 ++++- include/linux/crush/crush.h | 8 ++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/ceph_features.h b/include/linux/ceph/ceph_features.h index 342f93dbe162..dad579b0c0e6 100644 --- a/include/linux/ceph/ceph_features.h +++ b/include/linux/ceph/ceph_features.h @@ -12,12 +12,15 @@ #define CEPH_FEATURE_MONNAMES (1<<5) #define CEPH_FEATURE_RECONNECT_SEQ (1<<6) #define CEPH_FEATURE_DIRLAYOUTHASH (1<<7) +/* bits 8-17 defined by user-space; not supported yet here */ +#define CEPH_FEATURE_CRUSH_TUNABLES (1<<18) /* * Features supported. */ #define CEPH_FEATURES_SUPPORTED_DEFAULT \ - (CEPH_FEATURE_NOSRCADDR) + (CEPH_FEATURE_NOSRCADDR | \ + CEPH_FEATURE_CRUSH_TUNABLES) #define CEPH_FEATURES_REQUIRED_DEFAULT \ (CEPH_FEATURE_NOSRCADDR) diff --git a/include/linux/crush/crush.h b/include/linux/crush/crush.h index 7c4750811b96..25baa287cff7 100644 --- a/include/linux/crush/crush.h +++ b/include/linux/crush/crush.h @@ -154,6 +154,14 @@ struct crush_map { __s32 max_buckets; __u32 max_rules; __s32 max_devices; + + /* choose local retries before re-descent */ + __u32 choose_local_tries; + /* choose local attempts using a fallback permutation before + * re-descent */ + __u32 choose_local_fallback_tries; + /* choose attempts before giving up */ + __u32 choose_total_tries; }; -- cgit v1.2.3 From aa711ee3402ad10ffd5b70ce0417fadc9a95cccf Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 13 Jul 2012 20:35:11 -0500 Subject: ceph: define snap counts as u32 everywhere There are two structures in which a count of snapshots are maintained: struct ceph_snap_context { ... u32 num_snaps; ... } and struct ceph_snap_realm { ... u32 num_prior_parent_snaps; /* had prior to parent_since */ ... u32 num_snaps; ... } These fields never take on negative values (e.g., to hold special meaning), and so are really inherently unsigned. Furthermore they take their value from over-the-wire or on-disk formatted 32-bit values. So change their definition to have type u32, and change some spots elsewhere in the code to account for this change. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- include/linux/ceph/libceph.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index ea072e1f9db9..42624789b06f 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -154,7 +154,7 @@ struct ceph_client { struct ceph_snap_context { atomic_t nref; u64 seq; - int num_snaps; + u32 num_snaps; u64 snaps[]; }; -- cgit v1.2.3 From 8dacc7da69a491c515851e68de6036f21b5663ce Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 20 Jul 2012 17:24:40 -0700 Subject: libceph: replace connection state bits with states Use a simple set of 6 enumerated values for the socket states (CON_STATE_*) and use those instead of the state bits. All of the con->state checks are now under the protection of the con mutex, so this is safe. It also simplifies many of the state checks because we can check for anything other than the expected state instead of various bits for races we can think of. This appears to hold up well to stress testing both with and without socket failure injection on the server side. Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index a310d7fe6e29..d9c2b8f5abde 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -116,18 +116,6 @@ struct ceph_msg_pos { #define SOCK_CLOSED 11 /* socket state changed to closed */ #define BACKOFF 15 -/* - * ceph_connection states - */ -#define CONNECTING 1 -#define NEGOTIATING 2 -#define CONNECTED 5 -#define STANDBY 8 /* no outgoing messages, socket closed. we keep - * the ceph_connection around to maintain shared - * state with the peer. */ -#define CLOSED 10 /* we've closed the connection */ -#define OPENING 13 /* open connection w/ (possibly new) peer */ - /* * A single connection with another host. * -- cgit v1.2.3 From 4a8616920860920abaa51193146fe36b38ef09aa Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 20 Jul 2012 17:29:55 -0700 Subject: libceph: clean up con flags Rename flags with CON_FLAG prefix, move the definitions into the c file, and (better) document their meaning. Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index d9c2b8f5abde..189ae0637634 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -106,16 +106,6 @@ struct ceph_msg_pos { #define BASE_DELAY_INTERVAL (HZ/2) #define MAX_DELAY_INTERVAL (5 * 60 * HZ) -/* - * ceph_connection flag bits - */ - -#define LOSSYTX 0 /* we can close channel or drop messages on errors */ -#define KEEPALIVE_PENDING 3 -#define WRITE_PENDING 4 /* we have data ready to send */ -#define SOCK_CLOSED 11 /* socket state changed to closed */ -#define BACKOFF 15 - /* * A single connection with another host. * -- cgit v1.2.3 From 5accdf82ba25cacefd6c1867f1704beb4d244cdd Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 12 Jun 2012 16:20:34 +0200 Subject: fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa Tested-by: Peter M. Petrakis Tested-by: Dann Frazier Tested-by: Massimo Morana Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 150 ++++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 143 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 80c819cbe272..aefed9426b03 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -412,6 +412,7 @@ struct inodes_stat_t { #include #include #include +#include #include @@ -1439,6 +1440,8 @@ extern void f_delown(struct file *filp); extern pid_t f_getown(struct file *filp); extern int send_sigurg(struct fown_struct *fown); +struct mm_struct; + /* * Umount options */ @@ -1452,6 +1455,32 @@ extern int send_sigurg(struct fown_struct *fown); extern struct list_head super_blocks; extern spinlock_t sb_lock; +/* Possible states of 'frozen' field */ +enum { + SB_UNFROZEN = 0, /* FS is unfrozen */ + SB_FREEZE_WRITE = 1, /* Writes, dir ops, ioctls frozen */ + SB_FREEZE_TRANS = 2, + SB_FREEZE_PAGEFAULT = 2, /* Page faults stopped as well */ + SB_FREEZE_FS = 3, /* For internal FS use (e.g. to stop + * internal threads if needed) */ + SB_FREEZE_COMPLETE = 4, /* ->freeze_fs finished successfully */ +}; + +#define SB_FREEZE_LEVELS (SB_FREEZE_COMPLETE - 1) + +struct sb_writers { + /* Counters for counting writers at each level */ + struct percpu_counter counter[SB_FREEZE_LEVELS]; + wait_queue_head_t wait; /* queue for waiting for + writers / faults to finish */ + int frozen; /* Is sb frozen? */ + wait_queue_head_t wait_unfrozen; /* queue for waiting for + sb to be thawed */ +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map lock_map[SB_FREEZE_LEVELS]; +#endif +}; + struct super_block { struct list_head s_list; /* Keep this first */ dev_t s_dev; /* search index; _not_ kdev_t */ @@ -1501,6 +1530,7 @@ struct super_block { int s_frozen; wait_queue_head_t s_wait_unfrozen; + struct sb_writers s_writers; char s_id[32]; /* Informational name */ u8 s_uuid[16]; /* UUID */ @@ -1555,14 +1585,119 @@ extern struct timespec current_fs_time(struct super_block *sb); /* * Snapshotting support. */ -enum { - SB_UNFROZEN = 0, - SB_FREEZE_WRITE = 1, - SB_FREEZE_TRANS = 2, -}; +/* Will go away when all users are converted */ +#define vfs_check_frozen(sb, level) do { } while (0) + +void __sb_end_write(struct super_block *sb, int level); +int __sb_start_write(struct super_block *sb, int level, bool wait); + +/** + * sb_end_write - drop write access to a superblock + * @sb: the super we wrote to + * + * Decrement number of writers to the filesystem. Wake up possible waiters + * wanting to freeze the filesystem. + */ +static inline void sb_end_write(struct super_block *sb) +{ + __sb_end_write(sb, SB_FREEZE_WRITE); +} + +/** + * sb_end_pagefault - drop write access to a superblock from a page fault + * @sb: the super we wrote to + * + * Decrement number of processes handling write page fault to the filesystem. + * Wake up possible waiters wanting to freeze the filesystem. + */ +static inline void sb_end_pagefault(struct super_block *sb) +{ + __sb_end_write(sb, SB_FREEZE_PAGEFAULT); +} + +/** + * sb_end_intwrite - drop write access to a superblock for internal fs purposes + * @sb: the super we wrote to + * + * Decrement fs-internal number of writers to the filesystem. Wake up possible + * waiters wanting to freeze the filesystem. + */ +static inline void sb_end_intwrite(struct super_block *sb) +{ + __sb_end_write(sb, SB_FREEZE_FS); +} + +/** + * sb_start_write - get write access to a superblock + * @sb: the super we write to + * + * When a process wants to write data or metadata to a file system (i.e. dirty + * a page or an inode), it should embed the operation in a sb_start_write() - + * sb_end_write() pair to get exclusion against file system freezing. This + * function increments number of writers preventing freezing. If the file + * system is already frozen, the function waits until the file system is + * thawed. + * + * Since freeze protection behaves as a lock, users have to preserve + * ordering of freeze protection and other filesystem locks. Generally, + * freeze protection should be the outermost lock. In particular, we have: + * + * sb_start_write + * -> i_mutex (write path, truncate, directory ops, ...) + * -> s_umount (freeze_super, thaw_super) + */ +static inline void sb_start_write(struct super_block *sb) +{ + __sb_start_write(sb, SB_FREEZE_WRITE, true); +} + +static inline int sb_start_write_trylock(struct super_block *sb) +{ + return __sb_start_write(sb, SB_FREEZE_WRITE, false); +} + +/** + * sb_start_pagefault - get write access to a superblock from a page fault + * @sb: the super we write to + * + * When a process starts handling write page fault, it should embed the + * operation into sb_start_pagefault() - sb_end_pagefault() pair to get + * exclusion against file system freezing. This is needed since the page fault + * is going to dirty a page. This function increments number of running page + * faults preventing freezing. If the file system is already frozen, the + * function waits until the file system is thawed. + * + * Since page fault freeze protection behaves as a lock, users have to preserve + * ordering of freeze protection and other filesystem locks. It is advised to + * put sb_start_pagefault() close to mmap_sem in lock ordering. Page fault + * handling code implies lock dependency: + * + * mmap_sem + * -> sb_start_pagefault + */ +static inline void sb_start_pagefault(struct super_block *sb) +{ + __sb_start_write(sb, SB_FREEZE_PAGEFAULT, true); +} + +/* + * sb_start_intwrite - get write access to a superblock for internal fs purposes + * @sb: the super we write to + * + * This is the third level of protection against filesystem freezing. It is + * free for use by a filesystem. The only requirement is that it must rank + * below sb_start_pagefault. + * + * For example filesystem can call sb_start_intwrite() when starting a + * transaction which somewhat eases handling of freezing for internal sources + * of filesystem changes (internal fs threads, discarding preallocation on file + * close, etc.). + */ +static inline void sb_start_intwrite(struct super_block *sb) +{ + __sb_start_write(sb, SB_FREEZE_FS, true); +} -#define vfs_check_frozen(sb, level) \ - wait_event((sb)->s_wait_unfrozen, ((sb)->s_frozen < (level))) extern bool inode_owner_or_capable(const struct inode *inode); @@ -1886,6 +2021,7 @@ struct file_system_type { struct lock_class_key s_lock_key; struct lock_class_key s_umount_key; struct lock_class_key s_vfs_rename_key; + struct lock_class_key s_writers_key[SB_FREEZE_LEVELS]; struct lock_class_key i_lock_key; struct lock_class_key i_mutex_key; -- cgit v1.2.3 From d9c95bdd53a8d9116d269c91ce3d151472e6bcd6 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 12 Jun 2012 16:20:47 +0200 Subject: fs: Remove old freezing mechanism Now that all users are converted, we can remove functions, variables, and constants defined by the old freezing mechanism. BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa Tested-by: Peter M. Petrakis Tested-by: Dann Frazier Tested-by: Massimo Morana Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index aefed9426b03..0f4b79be8717 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1459,7 +1459,6 @@ extern spinlock_t sb_lock; enum { SB_UNFROZEN = 0, /* FS is unfrozen */ SB_FREEZE_WRITE = 1, /* Writes, dir ops, ioctls frozen */ - SB_FREEZE_TRANS = 2, SB_FREEZE_PAGEFAULT = 2, /* Page faults stopped as well */ SB_FREEZE_FS = 3, /* For internal FS use (e.g. to stop * internal threads if needed) */ @@ -1528,8 +1527,6 @@ struct super_block { struct hlist_node s_instances; struct quota_info s_dquot; /* Diskquota specific options */ - int s_frozen; - wait_queue_head_t s_wait_unfrozen; struct sb_writers s_writers; char s_id[32]; /* Informational name */ @@ -1585,8 +1582,6 @@ extern struct timespec current_fs_time(struct super_block *sb); /* * Snapshotting support. */ -/* Will go away when all users are converted */ -#define vfs_check_frozen(sb, level) do { } while (0) void __sb_end_write(struct super_block *sb, int level); int __sb_start_write(struct super_block *sb, int level, bool wait); -- cgit v1.2.3 From 9cbb17508808f8a6bdd83354b61e126ac4fa6fed Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 31 Jul 2012 09:08:14 +0200 Subject: blk: centralize non-request unplug handling. Both md and umem has similar code for getting notified on an blk_finish_plug event. Centralize this code in block/ and allow each driver to provide its distinctive difference. Signed-off-by: NeilBrown Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 3816ce8a08fc..607ca228f47e 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -922,11 +922,15 @@ struct blk_plug { }; #define BLK_MAX_REQUEST_COUNT 16 +struct blk_plug_cb; +typedef void (*blk_plug_cb_fn)(struct blk_plug_cb *); struct blk_plug_cb { struct list_head list; - void (*callback)(struct blk_plug_cb *); + blk_plug_cb_fn callback; + void *data; }; - +extern struct blk_plug_cb *blk_check_plugged(blk_plug_cb_fn unplug, + void *data, int size); extern void blk_start_plug(struct blk_plug *); extern void blk_finish_plug(struct blk_plug *); extern void blk_flush_plug_list(struct blk_plug *, bool); -- cgit v1.2.3 From 74018dc3063a2c729fc73041c0a9f03aac995920 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 31 Jul 2012 09:08:15 +0200 Subject: blk: pass from_schedule to non-request unplug functions. This will allow md/raid to know why the unplug was called, and will be able to act according - if !from_schedule it is safe to perform tasks which could themselves schedule. Signed-off-by: NeilBrown Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 607ca228f47e..4e72a9d48232 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -923,7 +923,7 @@ struct blk_plug { #define BLK_MAX_REQUEST_COUNT 16 struct blk_plug_cb; -typedef void (*blk_plug_cb_fn)(struct blk_plug_cb *); +typedef void (*blk_plug_cb_fn)(struct blk_plug_cb *, bool); struct blk_plug_cb { struct list_head list; blk_plug_cb_fn callback; -- cgit v1.2.3 From 7bedaa5537604f34d1d63c5ec7891e559d2a61ed Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 13 Apr 2012 12:10:24 +0100 Subject: dmaengine: add OMAP DMA engine driver Tested-by: Tony Lindgren Signed-off-by: Russell King --- include/linux/omap-dma.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/omap-dma.h (limited to 'include/linux') diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h new file mode 100644 index 000000000000..eb475a8ea25b --- /dev/null +++ b/include/linux/omap-dma.h @@ -0,0 +1,22 @@ +/* + * OMAP DMA Engine support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_OMAP_DMA_H +#define __LINUX_OMAP_DMA_H + +struct dma_chan; + +#if defined(CONFIG_DMA_OMAP) || defined(CONFIG_DMA_OMAP_MODULE) +bool omap_dma_filter_fn(struct dma_chan *, void *); +#else +static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d) +{ + return false; +} +#endif + +#endif -- cgit v1.2.3 From 4b1bf5871f7d59de6484cc887e205d6d2f1e6fbd Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 31 Jul 2012 04:39:30 -0700 Subject: thermal: Constify 'type' argument for the registration routine thermal_zone_device_register() does not modify 'type' argument, so it is safe to declare it as const. Otherwise, if we pass a const string, we are getting the ugly warning: CC drivers/power/power_supply_core.o drivers/power/power_supply_core.c: In function 'psy_register_thermal': drivers/power/power_supply_core.c:204:6: warning: passing argument 1 of 'thermal_zone_device_register' discards 'const' qualifier from pointer target type [enabled by default] include/linux/thermal.h:140:29: note: expected 'char *' but argument is of type 'const char *' Signed-off-by: Anton Vorontsov Acked-by: Jean Delvare --- include/linux/thermal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 6eaf9146c847..4821735f3e77 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -146,7 +146,7 @@ enum { }; #define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) -struct thermal_zone_device *thermal_zone_device_register(char *, int, int, +struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, const struct thermal_zone_device_ops *, int tc1, int tc2, int passive_freq, int polling_freq); void thermal_zone_device_unregister(struct thermal_zone_device *); -- cgit v1.2.3 From cba3345cc494ad286ca8823f44b2c16cae496679 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 31 Jul 2012 08:16:22 -0600 Subject: vfio: VFIO core VFIO is a secure user level driver for use with both virtual machines and user level drivers. VFIO makes use of IOMMU groups to ensure the isolation of devices in use, allowing unprivileged user access. It's intended that VFIO will replace KVM device assignment and UIO drivers (in cases where the target platform includes a sufficiently capable IOMMU). New in this version of VFIO is support for IOMMU groups managed through the IOMMU core as well as a rework of the API, removing the group merge interface. We now go back to a model more similar to original VFIO with UIOMMU support where the file descriptor obtained from /dev/vfio/vfio allows access to the IOMMU, but only after a group is added, avoiding the previous privilege issues with this type of model. IOMMU support is also now fully modular as IOMMUs have vastly different interface requirements on different platforms. VFIO users are able to query and initialize the IOMMU model of their choice. Please see the follow-on Documentation commit for further description and usage example. Signed-off-by: Alex Williamson --- include/linux/vfio.h | 367 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 367 insertions(+) create mode 100644 include/linux/vfio.h (limited to 'include/linux') diff --git a/include/linux/vfio.h b/include/linux/vfio.h new file mode 100644 index 000000000000..03e56a5154b6 --- /dev/null +++ b/include/linux/vfio.h @@ -0,0 +1,367 @@ +/* + * VFIO API definition + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef VFIO_H +#define VFIO_H + +#include +#include + +#define VFIO_API_VERSION 0 + +#ifdef __KERNEL__ /* Internal VFIO-core/bus driver API */ + +#include +#include + +/** + * struct vfio_device_ops - VFIO bus driver device callbacks + * + * @open: Called when userspace creates new file descriptor for device + * @release: Called when userspace releases file descriptor for device + * @read: Perform read(2) on device file descriptor + * @write: Perform write(2) on device file descriptor + * @ioctl: Perform ioctl(2) on device file descriptor, supporting VFIO_DEVICE_* + * operations documented below + * @mmap: Perform mmap(2) on a region of the device file descriptor + */ +struct vfio_device_ops { + char *name; + int (*open)(void *device_data); + void (*release)(void *device_data); + ssize_t (*read)(void *device_data, char __user *buf, + size_t count, loff_t *ppos); + ssize_t (*write)(void *device_data, const char __user *buf, + size_t count, loff_t *size); + long (*ioctl)(void *device_data, unsigned int cmd, + unsigned long arg); + int (*mmap)(void *device_data, struct vm_area_struct *vma); +}; + +extern int vfio_add_group_dev(struct device *dev, + const struct vfio_device_ops *ops, + void *device_data); + +extern void *vfio_del_group_dev(struct device *dev); + +/** + * struct vfio_iommu_driver_ops - VFIO IOMMU driver callbacks + */ +struct vfio_iommu_driver_ops { + char *name; + struct module *owner; + void *(*open)(unsigned long arg); + void (*release)(void *iommu_data); + ssize_t (*read)(void *iommu_data, char __user *buf, + size_t count, loff_t *ppos); + ssize_t (*write)(void *iommu_data, const char __user *buf, + size_t count, loff_t *size); + long (*ioctl)(void *iommu_data, unsigned int cmd, + unsigned long arg); + int (*mmap)(void *iommu_data, struct vm_area_struct *vma); + int (*attach_group)(void *iommu_data, + struct iommu_group *group); + void (*detach_group)(void *iommu_data, + struct iommu_group *group); + +}; + +extern int vfio_register_iommu_driver(const struct vfio_iommu_driver_ops *ops); + +extern void vfio_unregister_iommu_driver( + const struct vfio_iommu_driver_ops *ops); + +/** + * offsetofend(TYPE, MEMBER) + * + * @TYPE: The type of the structure + * @MEMBER: The member within the structure to get the end offset of + * + * Simple helper macro for dealing with variable sized structures passed + * from user space. This allows us to easily determine if the provided + * structure is sized to include various fields. + */ +#define offsetofend(TYPE, MEMBER) ({ \ + TYPE tmp; \ + offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); }) \ + +#endif /* __KERNEL__ */ + +/* Kernel & User level defines for VFIO IOCTLs. */ + +/* Extensions */ + +/* None yet */ + +/* + * The IOCTL interface is designed for extensibility by embedding the + * structure length (argsz) and flags into structures passed between + * kernel and userspace. We therefore use the _IO() macro for these + * defines to avoid implicitly embedding a size into the ioctl request. + * As structure fields are added, argsz will increase to match and flag + * bits will be defined to indicate additional fields with valid data. + * It's *always* the caller's responsibility to indicate the size of + * the structure passed by setting argsz appropriately. + */ + +#define VFIO_TYPE (';') +#define VFIO_BASE 100 + +/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ + +/** + * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) + * + * Report the version of the VFIO API. This allows us to bump the entire + * API version should we later need to add or change features in incompatible + * ways. + * Return: VFIO_API_VERSION + * Availability: Always + */ +#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) + +/** + * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) + * + * Check whether an extension is supported. + * Return: 0 if not supported, 1 (or some other positive integer) if supported. + * Availability: Always + */ +#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) + +/** + * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) + * + * Set the iommu to the given type. The type must be supported by an + * iommu driver as verified by calling CHECK_EXTENSION using the same + * type. A group must be set to this file descriptor before this + * ioctl is available. The IOMMU interfaces enabled by this call are + * specific to the value set. + * Return: 0 on success, -errno on failure + * Availability: When VFIO group attached + */ +#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) + +/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ + +/** + * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, + * struct vfio_group_status) + * + * Retrieve information about the group. Fills in provided + * struct vfio_group_info. Caller sets argsz. + * Return: 0 on succes, -errno on failure. + * Availability: Always + */ +struct vfio_group_status { + __u32 argsz; + __u32 flags; +#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) +#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) +}; +#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) + +/** + * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) + * + * Set the container for the VFIO group to the open VFIO file + * descriptor provided. Groups may only belong to a single + * container. Containers may, at their discretion, support multiple + * groups. Only when a container is set are all of the interfaces + * of the VFIO file descriptor and the VFIO group file descriptor + * available to the user. + * Return: 0 on success, -errno on failure. + * Availability: Always + */ +#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) + +/** + * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) + * + * Remove the group from the attached container. This is the + * opposite of the SET_CONTAINER call and returns the group to + * an initial state. All device file descriptors must be released + * prior to calling this interface. When removing the last group + * from a container, the IOMMU will be disabled and all state lost, + * effectively also returning the VFIO file descriptor to an initial + * state. + * Return: 0 on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) + +/** + * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) + * + * Return a new file descriptor for the device object described by + * the provided string. The string should match a device listed in + * the devices subdirectory of the IOMMU group sysfs entry. The + * group containing the device must already be added to this context. + * Return: new file descriptor on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) + +/* --------------- IOCTLs for DEVICE file descriptors --------------- */ + +/** + * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, + * struct vfio_device_info) + * + * Retrieve information about the device. Fills in provided + * struct vfio_device_info. Caller sets argsz. + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_info { + __u32 argsz; + __u32 flags; +#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ + __u32 num_regions; /* Max region index + 1 */ + __u32 num_irqs; /* Max IRQ index + 1 */ +}; +#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) + +/** + * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, + * struct vfio_region_info) + * + * Retrieve information about a device region. Caller provides + * struct vfio_region_info with index value set. Caller sets argsz. + * Implementation of region mapping is bus driver specific. This is + * intended to describe MMIO, I/O port, as well as bus specific + * regions (ex. PCI config space). Zero sized regions may be used + * to describe unimplemented regions (ex. unimplemented PCI BARs). + * Return: 0 on success, -errno on failure. + */ +struct vfio_region_info { + __u32 argsz; + __u32 flags; +#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ +#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ +#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ + __u32 index; /* Region index */ + __u32 resv; /* Reserved for alignment */ + __u64 size; /* Region size (bytes) */ + __u64 offset; /* Region offset from start of device fd */ +}; +#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) + +/** + * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, + * struct vfio_irq_info) + * + * Retrieve information about a device IRQ. Caller provides + * struct vfio_irq_info with index value set. Caller sets argsz. + * Implementation of IRQ mapping is bus driver specific. Indexes + * using multiple IRQs are primarily intended to support MSI-like + * interrupt blocks. Zero count irq blocks may be used to describe + * unimplemented interrupt types. + * + * The EVENTFD flag indicates the interrupt index supports eventfd based + * signaling. + * + * The MASKABLE flags indicates the index supports MASK and UNMASK + * actions described below. + * + * AUTOMASKED indicates that after signaling, the interrupt line is + * automatically masked by VFIO and the user needs to unmask the line + * to receive new interrupts. This is primarily intended to distinguish + * level triggered interrupts. + * + * The NORESIZE flag indicates that the interrupt lines within the index + * are setup as a set and new subindexes cannot be enabled without first + * disabling the entire index. This is used for interrupts like PCI MSI + * and MSI-X where the driver may only use a subset of the available + * indexes, but VFIO needs to enable a specific number of vectors + * upfront. In the case of MSI-X, where the user can enable MSI-X and + * then add and unmask vectors, it's up to userspace to make the decision + * whether to allocate the maximum supported number of vectors or tear + * down setup and incrementally increase the vectors as each is enabled. + */ +struct vfio_irq_info { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_INFO_EVENTFD (1 << 0) +#define VFIO_IRQ_INFO_MASKABLE (1 << 1) +#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) +#define VFIO_IRQ_INFO_NORESIZE (1 << 3) + __u32 index; /* IRQ index */ + __u32 count; /* Number of IRQs within this index */ +}; +#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) + +/** + * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) + * + * Set signaling, masking, and unmasking of interrupts. Caller provides + * struct vfio_irq_set with all fields set. 'start' and 'count' indicate + * the range of subindexes being specified. + * + * The DATA flags specify the type of data provided. If DATA_NONE, the + * operation performs the specified action immediately on the specified + * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: + * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. + * + * DATA_BOOL allows sparse support for the same on arrays of interrupts. + * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): + * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, + * data = {1,0,1} + * + * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. + * A value of -1 can be used to either de-assign interrupts if already + * assigned or skip un-assigned interrupts. For example, to set an eventfd + * to be trigger for interrupts [0,0] and [0,2]: + * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, + * data = {fd1, -1, fd2} + * If index [0,1] is previously set, two count = 1 ioctls calls would be + * required to set [0,0] and [0,2] without changing [0,1]. + * + * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used + * with ACTION_TRIGGER to perform kernel level interrupt loopback testing + * from userspace (ie. simulate hardware triggering). + * + * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER + * enables the interrupt index for the device. Individual subindex interrupts + * can be disabled using the -1 value for DATA_EVENTFD or the index can be + * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. + * + * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while + * ACTION_TRIGGER specifies kernel->user signaling. + */ +struct vfio_irq_set { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ +#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ +#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ +#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ +#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ +#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ + __u32 index; + __u32 start; + __u32 count; + __u8 data[]; +}; +#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) + +#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ + VFIO_IRQ_SET_DATA_BOOL | \ + VFIO_IRQ_SET_DATA_EVENTFD) +#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ + VFIO_IRQ_SET_ACTION_UNMASK | \ + VFIO_IRQ_SET_ACTION_TRIGGER) +/** + * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) + * + * Reset a device. + */ +#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) + +#endif /* VFIO_H */ -- cgit v1.2.3 From 73fa0d10d077d9521ee2dace2307ae2c9a965336 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 31 Jul 2012 08:16:23 -0600 Subject: vfio: Type1 IOMMU implementation This VFIO IOMMU backend is designed primarily for AMD-Vi and Intel VT-d hardware, but is potentially usable by anything supporting similar mapping functionality. We arbitrarily call this a Type1 backend for lack of a better name. This backend has no IOVA or host memory mapping restrictions for the user and is optimized for relatively static mappings. Mapped areas are pinned into system memory. Signed-off-by: Alex Williamson --- include/linux/vfio.h | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/vfio.h b/include/linux/vfio.h index 03e56a5154b6..acb046fd5b70 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -98,7 +98,7 @@ extern void vfio_unregister_iommu_driver( /* Extensions */ -/* None yet */ +#define VFIO_TYPE1_IOMMU 1 /* * The IOCTL interface is designed for extensibility by embedding the @@ -364,4 +364,56 @@ struct vfio_irq_set { */ #define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) +/* -------- API for Type1 VFIO IOMMU -------- */ + +/** + * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) + * + * Retrieve information about the IOMMU object. Fills in provided + * struct vfio_iommu_info. Caller sets argsz. + * + * XXX Should we do these by CHECK_EXTENSION too? + */ +struct vfio_iommu_type1_info { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ + __u64 iova_pgsizes; /* Bitmap of supported page sizes */ +}; + +#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/** + * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) + * + * Map process virtual addresses to IO virtual addresses using the + * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. + */ +struct vfio_iommu_type1_dma_map { + __u32 argsz; + __u32 flags; +#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ +#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ + __u64 vaddr; /* Process virtual address */ + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) + +/** + * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * + * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. + * Caller sets argsz. + */ +struct vfio_iommu_type1_dma_unmap { + __u32 argsz; + __u32 flags; + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) + #endif /* VFIO_H */ -- cgit v1.2.3 From 89e1f7d4c66d85f42c3d52ea3866eb10cadf6153 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 31 Jul 2012 08:16:24 -0600 Subject: vfio: Add PCI device driver Add PCI device support for VFIO. PCI devices expose regions for accessing config space, I/O port space, and MMIO areas of the device. PCI config access is virtualized in the kernel, allowing us to ensure the integrity of the system, by preventing various accesses while reducing duplicate support across various userspace drivers. I/O port supports read/write access while MMIO also supports mmap of sufficiently sized regions. Support for INTx, MSI, and MSI-X interrupts are provided using eventfds to userspace. Signed-off-by: Alex Williamson --- include/linux/vfio.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vfio.h b/include/linux/vfio.h index acb046fd5b70..0a4f180a11d8 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -223,6 +223,7 @@ struct vfio_device_info { __u32 argsz; __u32 flags; #define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ +#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ __u32 num_regions; /* Max region index + 1 */ __u32 num_irqs; /* Max IRQ index + 1 */ }; @@ -364,6 +365,31 @@ struct vfio_irq_set { */ #define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) +/* + * The VFIO-PCI bus driver makes use of the following fixed region and + * IRQ index mapping. Unimplemented regions return a size of zero. + * Unimplemented IRQ types return a count of zero. + */ + +enum { + VFIO_PCI_BAR0_REGION_INDEX, + VFIO_PCI_BAR1_REGION_INDEX, + VFIO_PCI_BAR2_REGION_INDEX, + VFIO_PCI_BAR3_REGION_INDEX, + VFIO_PCI_BAR4_REGION_INDEX, + VFIO_PCI_BAR5_REGION_INDEX, + VFIO_PCI_ROM_REGION_INDEX, + VFIO_PCI_CONFIG_REGION_INDEX, + VFIO_PCI_NUM_REGIONS +}; + +enum { + VFIO_PCI_INTX_IRQ_INDEX, + VFIO_PCI_MSI_IRQ_INDEX, + VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_NUM_IRQS +}; + /* -------- API for Type1 VFIO IOMMU -------- */ /** -- cgit v1.2.3 From 44de9d0cad41f2c51ef26916842be046b582dcc9 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 31 Jul 2012 16:41:49 -0700 Subject: mm: account the total_vm in the vm_stat_account() vm_stat_account() accounts the shared_vm, stack_vm and reserved_vm now. But we can also account for total_vm in the vm_stat_account() which makes the code tidy. Even for mprotect_fixup(), we can get the right result in the end. Signed-off-by: Huang Shijie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index f9f279cf5b1b..3955bedeeed1 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1528,6 +1528,7 @@ void vm_stat_account(struct mm_struct *, unsigned long, struct file *, long); static inline void vm_stat_account(struct mm_struct *mm, unsigned long flags, struct file *file, long pages) { + mm->total_vm += pages; } #endif /* CONFIG_PROC_FS */ -- cgit v1.2.3 From 3965c9ae47d64aadf6f13b6fcd37767b83c0689a Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Tue, 31 Jul 2012 16:41:52 -0700 Subject: mm: prepare for removal of obsolete /proc/sys/vm/nr_pdflush_threads Since per-BDI flusher threads were introduced in 2.6, the pdflush mechanism is not used any more. But the old interface exported through /proc/sys/vm/nr_pdflush_threads still exists and is obviously useless. For back-compatibility, printk warning information and return 2 to notify the users that the interface is removed. Signed-off-by: Wanpeng Li Cc: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/backing-dev.h | 3 +++ include/linux/writeback.h | 5 ----- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 489de625cd25..c97c6b9cd38e 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -17,6 +17,7 @@ #include #include #include +#include struct page; struct device; @@ -304,6 +305,8 @@ void clear_bdi_congested(struct backing_dev_info *bdi, int sync); void set_bdi_congested(struct backing_dev_info *bdi, int sync); long congestion_wait(int sync, long timeout); long wait_iff_congested(struct zone *zone, int sync, long timeout); +int pdflush_proc_obsolete(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos); static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi) { diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 6d0a0fcd80e7..c66fe3332d83 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -189,9 +189,4 @@ void tag_pages_for_writeback(struct address_space *mapping, void account_page_redirty(struct page *page); -/* pdflush.c */ -extern int nr_pdflush_threads; /* Global so it can be exported to sysctl - read-only. */ - - #endif /* WRITEBACK_H */ -- cgit v1.2.3 From 972dc4de13f667a7df27ee32573b2e6fc6cc8434 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:00 -0700 Subject: hugetlb: add an inline helper for finding hstate index Add an inline helper and use it in the code. Signed-off-by: Aneesh Kumar K.V Acked-by: David Rientjes Acked-by: Michal Hocko Reviewed-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index d5d6bbe2259e..217f52859fa7 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -302,6 +302,11 @@ static inline unsigned hstate_index_to_shift(unsigned index) return hstates[index].order + PAGE_SHIFT; } +static inline int hstate_index(struct hstate *h) +{ + return h - hstates; +} + #else struct hstate {}; #define alloc_huge_page_node(h, nid) NULL @@ -320,6 +325,7 @@ static inline unsigned int pages_per_huge_page(struct hstate *h) return 1; } #define hstate_index_to_shift(index) 0 +#define hstate_index(h) 0 #endif #endif /* _LINUX_HUGETLB_H */ -- cgit v1.2.3 From 24669e58477e2752c1fbca9c1c988e9dd0d79d15 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:03 -0700 Subject: hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages Use a mmu_gather instead of a temporary linked list for accumulating pages when we unmap a hugepage range Signed-off-by: Aneesh Kumar K.V Reviewed-by: KAMEZAWA Hiroyuki Cc: David Rientjes Cc: Hillf Danton Cc: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 217f52859fa7..0f23c1840c9b 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -7,6 +7,7 @@ struct ctl_table; struct user_struct; +struct mmu_gather; #ifdef CONFIG_HUGETLB_PAGE @@ -40,9 +41,10 @@ int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int, unsigned int flags); void unmap_hugepage_range(struct vm_area_struct *, - unsigned long, unsigned long, struct page *); -void __unmap_hugepage_range(struct vm_area_struct *, - unsigned long, unsigned long, struct page *); + unsigned long, unsigned long, struct page *); +void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma, + unsigned long start, unsigned long end, + struct page *ref_page); int hugetlb_prefault(struct address_space *, struct vm_area_struct *); void hugetlb_report_meminfo(struct seq_file *); int hugetlb_report_node_meminfo(int, char *); @@ -98,7 +100,6 @@ static inline unsigned long hugetlb_total_pages(void) #define follow_huge_addr(mm, addr, write) ERR_PTR(-EINVAL) #define copy_hugetlb_page_range(src, dst, vma) ({ BUG(); 0; }) #define hugetlb_prefault(mapping, vma) ({ BUG(); 0; }) -#define unmap_hugepage_range(vma, start, end, page) BUG() static inline void hugetlb_report_meminfo(struct seq_file *m) { } @@ -112,13 +113,24 @@ static inline void hugetlb_report_meminfo(struct seq_file *m) #define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; }) #define hugetlb_fault(mm, vma, addr, flags) ({ BUG(); 0; }) #define huge_pte_offset(mm, address) 0 -#define dequeue_hwpoisoned_huge_page(page) 0 +static inline int dequeue_hwpoisoned_huge_page(struct page *page) +{ + return 0; +} + static inline void copy_huge_page(struct page *dst, struct page *src) { } #define hugetlb_change_protection(vma, address, end, newprot) +static inline void __unmap_hugepage_range(struct mmu_gather *tlb, + struct vm_area_struct *vma, unsigned long start, + unsigned long end, struct page *ref_page) +{ + BUG(); +} + #endif /* !CONFIG_HUGETLB_PAGE */ #define HUGETLB_ANON_FILE "anon_hugepage" -- cgit v1.2.3 From 189ebff2894a9d0f4e250dd1e154d282ef0a6779 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:06 -0700 Subject: hugetlb: simplify migrate_huge_page() Since we migrate only one hugepage, don't use linked list for passing the page around. Directly pass the page that need to be migrated as argument. This also removes the usage of page->lru in the migrate path. Signed-off-by: Aneesh Kumar K.V Reviewed-by: KAMEZAWA Hiroyuki Cc: David Rientjes Cc: Hillf Danton Reviewed-by: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/migrate.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/migrate.h b/include/linux/migrate.h index 855c337b20c3..ce7e6671968b 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -15,7 +15,7 @@ extern int migrate_page(struct address_space *, extern int migrate_pages(struct list_head *l, new_page_t x, unsigned long private, bool offlining, enum migrate_mode mode); -extern int migrate_huge_pages(struct list_head *l, new_page_t x, +extern int migrate_huge_page(struct page *, new_page_t x, unsigned long private, bool offlining, enum migrate_mode mode); @@ -36,7 +36,7 @@ static inline void putback_lru_pages(struct list_head *l) {} static inline int migrate_pages(struct list_head *l, new_page_t x, unsigned long private, bool offlining, enum migrate_mode mode) { return -ENOSYS; } -static inline int migrate_huge_pages(struct list_head *l, new_page_t x, +static inline int migrate_huge_page(struct page *page, new_page_t x, unsigned long private, bool offlining, enum migrate_mode mode) { return -ENOSYS; } -- cgit v1.2.3 From 0edaecfab218d747d30de4575e911907371e2cd2 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:07 -0700 Subject: hugetlb: add a list for tracking in-use HugeTLB pages hugepage_activelist will be used to track currently used HugeTLB pages. We need to find the in-use HugeTLB pages to support HugeTLB cgroup removal. On cgroup removal we update the page's HugeTLB cgroup to point to parent cgroup. Signed-off-by: Aneesh Kumar K.V Reviewed-by: KAMEZAWA Hiroyuki Cc: David Rientjes Cc: Hillf Danton Reviewed-by: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 0f23c1840c9b..ed550d819044 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -211,6 +211,7 @@ struct hstate { unsigned long resv_huge_pages; unsigned long surplus_huge_pages; unsigned long nr_overcommit_huge_pages; + struct list_head hugepage_activelist; struct list_head hugepage_freelists[MAX_NUMNODES]; unsigned int nr_huge_pages_node[MAX_NUMNODES]; unsigned int free_huge_pages_node[MAX_NUMNODES]; -- cgit v1.2.3 From c3f38a38715e9b4e7b1dda6840a1375f6894744d Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:10 -0700 Subject: hugetlb: make some static variables global We will use them later in hugetlb_cgroup.c Signed-off-by: Aneesh Kumar K.V Cc: David Rientjes Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Reviewed-by: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index ed550d819044..3d677dd41898 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -21,6 +21,11 @@ struct hugepage_subpool { long max_hpages, used_hpages; }; +extern spinlock_t hugetlb_lock; +extern int hugetlb_max_hstate __read_mostly; +#define for_each_hstate(h) \ + for ((h) = hstates; (h) < &hstates[hugetlb_max_hstate]; (h)++) + struct hugepage_subpool *hugepage_new_subpool(long nr_blocks); void hugepage_put_subpool(struct hugepage_subpool *spool); -- cgit v1.2.3 From 2bc64a2046975410505bb119bba32705892b9255 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:12 -0700 Subject: mm/hugetlb: add new HugeTLB cgroup Implement a new controller that allows us to control HugeTLB allocations. The extension allows to limit the HugeTLB usage per control group and enforces the controller limit during page fault. Since HugeTLB doesn't support page reclaim, enforcing the limit at page fault time implies that, the application will get SIGBUS signal if it tries to access HugeTLB pages beyond its limit. This requires the application to know beforehand how much HugeTLB pages it would require for its use. The charge/uncharge calls will be added to HugeTLB code in later patch. Support for cgroup removal will be added in later patches. [akpm@linux-foundation.org: s/CONFIG_CGROUP_HUGETLB_RES_CTLR/CONFIG_MEMCG_HUGETLB/g] [akpm@linux-foundation.org: s/CONFIG_MEMCG_HUGETLB/CONFIG_CGROUP_HUGETLB/g] Reviewed-by: KAMEZAWA Hiroyuki Signed-off-by: Aneesh Kumar K.V Cc: David Rientjes Cc: Hillf Danton Reviewed-by: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup_subsys.h | 6 ++++++ include/linux/hugetlb_cgroup.h | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) create mode 100644 include/linux/hugetlb_cgroup.h (limited to 'include/linux') diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h index 0bd390ce98b2..5b41ce079024 100644 --- a/include/linux/cgroup_subsys.h +++ b/include/linux/cgroup_subsys.h @@ -72,3 +72,9 @@ SUBSYS(net_prio) #endif /* */ + +#ifdef CONFIG_CGROUP_HUGETLB +SUBSYS(hugetlb) +#endif + +/* */ diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h new file mode 100644 index 000000000000..f19889e56b47 --- /dev/null +++ b/include/linux/hugetlb_cgroup.h @@ -0,0 +1,37 @@ +/* + * Copyright IBM Corporation, 2012 + * Author Aneesh Kumar K.V + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2.1 of the GNU Lesser General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + */ + +#ifndef _LINUX_HUGETLB_CGROUP_H +#define _LINUX_HUGETLB_CGROUP_H + +#include + +struct hugetlb_cgroup; + +#ifdef CONFIG_CGROUP_HUGETLB +static inline bool hugetlb_cgroup_disabled(void) +{ + if (hugetlb_subsys.disabled) + return true; + return false; +} + +#else +static inline bool hugetlb_cgroup_disabled(void) +{ + return true; +} + +#endif /* CONFIG_MEM_RES_CTLR_HUGETLB */ +#endif -- cgit v1.2.3 From 9dd540e23111d8884773ab942a736f3aba4040d4 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:15 -0700 Subject: hugetlb/cgroup: add the cgroup pointer to page lru Add the hugetlb cgroup pointer to 3rd page lru.next. This limit the usage to hugetlb cgroup to only hugepages with 3 or more normal pages. I guess that is an acceptable limitation. Signed-off-by: Aneesh Kumar K.V Cc: David Rientjes Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Reviewed-by: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb_cgroup.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h index f19889e56b47..e5451a3b4ebc 100644 --- a/include/linux/hugetlb_cgroup.h +++ b/include/linux/hugetlb_cgroup.h @@ -18,8 +18,34 @@ #include struct hugetlb_cgroup; +/* + * Minimum page order trackable by hugetlb cgroup. + * At least 3 pages are necessary for all the tracking information. + */ +#define HUGETLB_CGROUP_MIN_ORDER 2 #ifdef CONFIG_CGROUP_HUGETLB + +static inline struct hugetlb_cgroup *hugetlb_cgroup_from_page(struct page *page) +{ + VM_BUG_ON(!PageHuge(page)); + + if (compound_order(page) < HUGETLB_CGROUP_MIN_ORDER) + return NULL; + return (struct hugetlb_cgroup *)page[2].lru.next; +} + +static inline +int set_hugetlb_cgroup(struct page *page, struct hugetlb_cgroup *h_cg) +{ + VM_BUG_ON(!PageHuge(page)); + + if (compound_order(page) < HUGETLB_CGROUP_MIN_ORDER) + return -1; + page[2].lru.next = (void *)h_cg; + return 0; +} + static inline bool hugetlb_cgroup_disabled(void) { if (hugetlb_subsys.disabled) @@ -28,6 +54,17 @@ static inline bool hugetlb_cgroup_disabled(void) } #else +static inline struct hugetlb_cgroup *hugetlb_cgroup_from_page(struct page *page) +{ + return NULL; +} + +static inline +int set_hugetlb_cgroup(struct page *page, struct hugetlb_cgroup *h_cg) +{ + return 0; +} + static inline bool hugetlb_cgroup_disabled(void) { return true; -- cgit v1.2.3 From 6d76dcf40405144a448040a350fd214ddc243d5e Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:18 -0700 Subject: hugetlb/cgroup: add charge/uncharge routines for hugetlb cgroup Add the charge and uncharge routines for hugetlb cgroup. We do cgroup charging in page alloc and uncharge in compound page destructor. Assigning page's hugetlb cgroup is protected by hugetlb_lock. [liwp@linux.vnet.ibm.com: add huge_page_order check to avoid incorrect uncharge] Signed-off-by: Aneesh Kumar K.V Cc: David Rientjes Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Cc: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Aneesh Kumar K.V Signed-off-by: Wanpeng Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb_cgroup.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h index e5451a3b4ebc..7d3fde996be3 100644 --- a/include/linux/hugetlb_cgroup.h +++ b/include/linux/hugetlb_cgroup.h @@ -53,6 +53,16 @@ static inline bool hugetlb_cgroup_disabled(void) return false; } +extern int hugetlb_cgroup_charge_cgroup(int idx, unsigned long nr_pages, + struct hugetlb_cgroup **ptr); +extern void hugetlb_cgroup_commit_charge(int idx, unsigned long nr_pages, + struct hugetlb_cgroup *h_cg, + struct page *page); +extern void hugetlb_cgroup_uncharge_page(int idx, unsigned long nr_pages, + struct page *page); +extern void hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, + struct hugetlb_cgroup *h_cg); + #else static inline struct hugetlb_cgroup *hugetlb_cgroup_from_page(struct page *page) { @@ -70,5 +80,33 @@ static inline bool hugetlb_cgroup_disabled(void) return true; } +static inline int +hugetlb_cgroup_charge_cgroup(int idx, unsigned long nr_pages, + struct hugetlb_cgroup **ptr) +{ + return 0; +} + +static inline void +hugetlb_cgroup_commit_charge(int idx, unsigned long nr_pages, + struct hugetlb_cgroup *h_cg, + struct page *page) +{ + return; +} + +static inline void +hugetlb_cgroup_uncharge_page(int idx, unsigned long nr_pages, struct page *page) +{ + return; +} + +static inline void +hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, + struct hugetlb_cgroup *h_cg) +{ + return; +} + #endif /* CONFIG_MEM_RES_CTLR_HUGETLB */ #endif -- cgit v1.2.3 From abb8206cb07734d0b7bf033c715995d6371a94c3 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:24 -0700 Subject: hugetlb/cgroup: add hugetlb cgroup control files Add the control files for hugetlb controller [akpm@linux-foundation.org: s/CONFIG_CGROUP_HUGETLB_RES_CTLR/CONFIG_MEMCG_HUGETLB/g] [akpm@linux-foundation.org: s/CONFIG_MEMCG_HUGETLB/CONFIG_CGROUP_HUGETLB/] Signed-off-by: Aneesh Kumar K.V Cc: David Rientjes Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Reviewed-by: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 5 +++++ include/linux/hugetlb_cgroup.h | 6 ++++++ 2 files changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 3d677dd41898..f9db20bfa9fc 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -4,6 +4,7 @@ #include #include #include +#include struct ctl_table; struct user_struct; @@ -221,6 +222,10 @@ struct hstate { unsigned int nr_huge_pages_node[MAX_NUMNODES]; unsigned int free_huge_pages_node[MAX_NUMNODES]; unsigned int surplus_huge_pages_node[MAX_NUMNODES]; +#ifdef CONFIG_CGROUP_HUGETLB + /* cgroup control files */ + struct cftype cgroup_files[5]; +#endif char name[HSTATE_NAME_LEN]; }; diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h index 7d3fde996be3..73f1e600fc12 100644 --- a/include/linux/hugetlb_cgroup.h +++ b/include/linux/hugetlb_cgroup.h @@ -62,6 +62,7 @@ extern void hugetlb_cgroup_uncharge_page(int idx, unsigned long nr_pages, struct page *page); extern void hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, struct hugetlb_cgroup *h_cg); +extern int hugetlb_cgroup_file_init(int idx) __init; #else static inline struct hugetlb_cgroup *hugetlb_cgroup_from_page(struct page *page) @@ -108,5 +109,10 @@ hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, return; } +static inline int __init hugetlb_cgroup_file_init(int idx) +{ + return 0; +} + #endif /* CONFIG_MEM_RES_CTLR_HUGETLB */ #endif -- cgit v1.2.3 From 8e6ac7fab374816de9a8b0a8fbb02ef761a30ff4 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 31 Jul 2012 16:42:27 -0700 Subject: hugetlb/cgroup: migrate hugetlb cgroup info from oldpage to new page during migration With HugeTLB pages, hugetlb cgroup is uncharged in compound page destructor. Since we are holding a hugepage reference, we can be sure that old page won't get uncharged till the last put_page(). Signed-off-by: Aneesh Kumar K.V Cc: David Rientjes Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Cc: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb_cgroup.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h index 73f1e600fc12..d73878c694b3 100644 --- a/include/linux/hugetlb_cgroup.h +++ b/include/linux/hugetlb_cgroup.h @@ -63,6 +63,8 @@ extern void hugetlb_cgroup_uncharge_page(int idx, unsigned long nr_pages, extern void hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, struct hugetlb_cgroup *h_cg); extern int hugetlb_cgroup_file_init(int idx) __init; +extern void hugetlb_cgroup_migrate(struct page *oldhpage, + struct page *newhpage); #else static inline struct hugetlb_cgroup *hugetlb_cgroup_from_page(struct page *page) @@ -114,5 +116,11 @@ static inline int __init hugetlb_cgroup_file_init(int idx) return 0; } +static inline void hugetlb_cgroup_migrate(struct page *oldhpage, + struct page *newhpage) +{ + return; +} + #endif /* CONFIG_MEM_RES_CTLR_HUGETLB */ #endif -- cgit v1.2.3 From c59e26104e3e0e952cd7d63e79cd71ee5a9ec25a Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Tue, 31 Jul 2012 16:42:49 -0700 Subject: mm/compaction: cleanup on compaction_deferred When CONFIG_COMPACTION is enabled, compaction_deferred() tries to recalculate the deferred limit again, which isn't necessary. When CONFIG_COMPACTION is disabled, compaction_deferred() should return "true" or "false" since it has "bool" for its return value. Signed-off-by: Gavin Shan Acked-by: Minchan Kim Acked-by: Johannes Weiner Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compaction.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/compaction.h b/include/linux/compaction.h index 51a90b7f2d60..133ddcf83397 100644 --- a/include/linux/compaction.h +++ b/include/linux/compaction.h @@ -58,7 +58,7 @@ static inline bool compaction_deferred(struct zone *zone, int order) if (++zone->compact_considered > defer_limit) zone->compact_considered = defer_limit; - return zone->compact_considered < (1UL << zone->compact_defer_shift); + return zone->compact_considered < defer_limit; } #else @@ -85,7 +85,7 @@ static inline void defer_compaction(struct zone *zone, int order) static inline bool compaction_deferred(struct zone *zone, int order) { - return 1; + return true; } #endif /* CONFIG_COMPACTION */ -- cgit v1.2.3 From c255a458055e459f65eb7b7f51dc5dbdd0caf1d8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 31 Jul 2012 16:43:02 -0700 Subject: memcg: rename config variables Sanity: CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM [mhocko@suse.cz: fix missed bits] Cc: Glauber Costa Acked-by: Michal Hocko Cc: Johannes Weiner Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Tejun Heo Cc: Aneesh Kumar K.V Cc: David Rientjes Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup_subsys.h | 2 +- include/linux/memcontrol.h | 14 +++++++------- include/linux/mmzone.h | 8 ++++---- include/linux/page_cgroup.h | 10 +++++----- include/linux/sched.h | 2 +- include/linux/swap.h | 6 +++--- 6 files changed, 21 insertions(+), 21 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h index 5b41ce079024..dfae957398c3 100644 --- a/include/linux/cgroup_subsys.h +++ b/include/linux/cgroup_subsys.h @@ -31,7 +31,7 @@ SUBSYS(cpuacct) /* */ -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG SUBSYS(mem_cgroup) #endif diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 83e7ba90d6e5..170076222431 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -38,7 +38,7 @@ struct mem_cgroup_reclaim_cookie { unsigned int generation; }; -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG /* * All "charge" functions with gfp_mask should use GFP_KERNEL or * (gfp_mask & GFP_RECLAIM_MASK). In current implementatin, memcg doesn't @@ -124,7 +124,7 @@ extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg, extern void mem_cgroup_replace_page_cache(struct page *oldpage, struct page *newpage); -#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP +#ifdef CONFIG_MEMCG_SWAP extern int do_swap_account; #endif @@ -193,7 +193,7 @@ void mem_cgroup_split_huge_fixup(struct page *head); bool mem_cgroup_bad_page_check(struct page *page); void mem_cgroup_print_bad_page(struct page *page); #endif -#else /* CONFIG_CGROUP_MEM_RES_CTLR */ +#else /* CONFIG_MEMCG */ struct mem_cgroup; static inline int mem_cgroup_newpage_charge(struct page *page, @@ -384,9 +384,9 @@ static inline void mem_cgroup_replace_page_cache(struct page *oldpage, struct page *newpage) { } -#endif /* CONFIG_CGROUP_MEM_RES_CTLR */ +#endif /* CONFIG_MEMCG */ -#if !defined(CONFIG_CGROUP_MEM_RES_CTLR) || !defined(CONFIG_DEBUG_VM) +#if !defined(CONFIG_MEMCG) || !defined(CONFIG_DEBUG_VM) static inline bool mem_cgroup_bad_page_check(struct page *page) { @@ -406,7 +406,7 @@ enum { }; struct sock; -#ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM +#ifdef CONFIG_MEMCG_KMEM void sock_update_memcg(struct sock *sk); void sock_release_memcg(struct sock *sk); #else @@ -416,6 +416,6 @@ static inline void sock_update_memcg(struct sock *sk) static inline void sock_release_memcg(struct sock *sk) { } -#endif /* CONFIG_CGROUP_MEM_RES_CTLR_KMEM */ +#endif /* CONFIG_MEMCG_KMEM */ #endif /* _LINUX_MEMCONTROL_H */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 458988bd55a1..3bdfa15b2012 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -201,7 +201,7 @@ struct zone_reclaim_stat { struct lruvec { struct list_head lists[NR_LRU_LISTS]; struct zone_reclaim_stat reclaim_stat; -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG struct zone *zone; #endif }; @@ -671,7 +671,7 @@ typedef struct pglist_data { int nr_zones; #ifdef CONFIG_FLAT_NODE_MEM_MAP /* means !SPARSEMEM */ struct page *node_mem_map; -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG struct page_cgroup *node_page_cgroup; #endif #endif @@ -736,7 +736,7 @@ extern void lruvec_init(struct lruvec *lruvec, struct zone *zone); static inline struct zone *lruvec_zone(struct lruvec *lruvec) { -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG return lruvec->zone; #else return container_of(lruvec, struct zone, lruvec); @@ -1052,7 +1052,7 @@ struct mem_section { /* See declaration of similar field in struct zone */ unsigned long *pageblock_flags; -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG /* * If !SPARSEMEM, pgdat doesn't have page_cgroup pointer. We use * section. (see memcontrol.h/page_cgroup.h about this.) diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index a88cdba27809..777a524716db 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -12,7 +12,7 @@ enum { #ifndef __GENERATING_BOUNDS_H #include -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG #include /* @@ -82,7 +82,7 @@ static inline void unlock_page_cgroup(struct page_cgroup *pc) bit_spin_unlock(PCG_LOCK, &pc->flags); } -#else /* CONFIG_CGROUP_MEM_RES_CTLR */ +#else /* CONFIG_MEMCG */ struct page_cgroup; static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat) @@ -102,11 +102,11 @@ static inline void __init page_cgroup_init_flatmem(void) { } -#endif /* CONFIG_CGROUP_MEM_RES_CTLR */ +#endif /* CONFIG_MEMCG */ #include -#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP +#ifdef CONFIG_MEMCG_SWAP extern unsigned short swap_cgroup_cmpxchg(swp_entry_t ent, unsigned short old, unsigned short new); extern unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id); @@ -138,7 +138,7 @@ static inline void swap_cgroup_swapoff(int type) return; } -#endif /* CONFIG_CGROUP_MEM_RES_CTLR_SWAP */ +#endif /* CONFIG_MEMCG_SWAP */ #endif /* !__GENERATING_BOUNDS_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 68dcffaa62a0..865725adb9d3 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1584,7 +1584,7 @@ struct task_struct { /* bitmask and counter of trace recursion */ unsigned long trace_recursion; #endif /* CONFIG_TRACING */ -#ifdef CONFIG_CGROUP_MEM_RES_CTLR /* memcg uses this to do batch job */ +#ifdef CONFIG_MEMCG /* memcg uses this to do batch job */ struct memcg_batch_info { int do_batch; /* incremented when batch uncharge started */ struct mem_cgroup *memcg; /* target memcg of uncharge */ diff --git a/include/linux/swap.h b/include/linux/swap.h index c84ec68eaec9..9a16bb1cefd1 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -301,7 +301,7 @@ static inline void scan_unevictable_unregister_node(struct node *node) extern int kswapd_run(int nid); extern void kswapd_stop(int nid); -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG extern int mem_cgroup_swappiness(struct mem_cgroup *mem); #else static inline int mem_cgroup_swappiness(struct mem_cgroup *mem) @@ -309,7 +309,7 @@ static inline int mem_cgroup_swappiness(struct mem_cgroup *mem) return vm_swappiness; } #endif -#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP +#ifdef CONFIG_MEMCG_SWAP extern void mem_cgroup_uncharge_swap(swp_entry_t ent); #else static inline void mem_cgroup_uncharge_swap(swp_entry_t ent) @@ -360,7 +360,7 @@ extern int reuse_swap_page(struct page *); extern int try_to_free_swap(struct page *); struct backing_dev_info; -#ifdef CONFIG_CGROUP_MEM_RES_CTLR +#ifdef CONFIG_MEMCG extern void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout); #else -- cgit v1.2.3 From ca28ddc908fcfef0e5c1b6e5df632db7fc26de10 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Tue, 31 Jul 2012 16:43:04 -0700 Subject: mm: remove unused LRU_ALL_EVICTABLE Signed-off-by: Wanpeng Li Acked-by: KAMEZAWA Hiroyuki Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 3bdfa15b2012..1495d952e641 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -209,7 +209,6 @@ struct lruvec { /* Mask used at gathering information at once (see memcontrol.c) */ #define LRU_ALL_FILE (BIT(LRU_INACTIVE_FILE) | BIT(LRU_ACTIVE_FILE)) #define LRU_ALL_ANON (BIT(LRU_INACTIVE_ANON) | BIT(LRU_ACTIVE_ANON)) -#define LRU_ALL_EVICTABLE (LRU_ALL_FILE | LRU_ALL_ANON) #define LRU_ALL ((1 << NR_LRU_LISTS) - 1) /* Isolate clean file */ -- cgit v1.2.3 From 7db8889ab05b57200158432755af318fb68854a2 Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Tue, 31 Jul 2012 16:43:12 -0700 Subject: mm: have order > 0 compaction start off where it left Order > 0 compaction stops when enough free pages of the correct page order have been coalesced. When doing subsequent higher order allocations, it is possible for compaction to be invoked many times. However, the compaction code always starts out looking for things to compact at the start of the zone, and for free pages to compact things to at the end of the zone. This can cause quadratic behaviour, with isolate_freepages starting at the end of the zone each time, even though previous invocations of the compaction code already filled up all free memory on that end of the zone. This can cause isolate_freepages to take enormous amounts of CPU with certain workloads on larger memory systems. The obvious solution is to have isolate_freepages remember where it left off last time, and continue at that point the next time it gets invoked for an order > 0 compaction. This could cause compaction to fail if cc->free_pfn and cc->migrate_pfn are close together initially, in that case we restart from the end of the zone and try once more. Forced full (order == -1) compactions are left alone. [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: s/laste/last/, use 80 cols] Signed-off-by: Rik van Riel Reported-by: Jim Schutt Tested-by: Jim Schutt Cc: Minchan Kim Reviewed-by: KAMEZAWA Hiroyuki Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 1495d952e641..1aeadce4d56e 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -368,6 +368,10 @@ struct zone { */ spinlock_t lock; int all_unreclaimable; /* All pages pinned */ +#if defined CONFIG_COMPACTION || defined CONFIG_CMA + /* pfn where the last incremental compaction isolated free pages */ + unsigned long compact_cached_free_pfn; +#endif #ifdef CONFIG_MEMORY_HOTPLUG /* see spanned/present_pages for more description */ seqlock_t span_seqlock; -- cgit v1.2.3 From fe03025db3f4ade1f231b174938e0fe224722759 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 31 Jul 2012 16:43:14 -0700 Subject: mm: CONFIG_HAVE_MEMBLOCK_NODE -> CONFIG_HAVE_MEMBLOCK_NODE_MAP 0ee332c14518699 ("memblock: Kill early_node_map[]") wanted to replace CONFIG_ARCH_POPULATES_NODE_MAP with CONFIG_HAVE_MEMBLOCK_NODE_MAP but ended up replacing one occurence with a reference to the non-existent symbol CONFIG_HAVE_MEMBLOCK_NODE. The resulting omission of code would probably have been causing problems to 32-bit machines with memory hotplug. Signed-off-by: Rabin Vincent Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 1aeadce4d56e..f64afa5929fe 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -776,7 +776,7 @@ extern int movable_zone; static inline int zone_movable_is_highmem(void) { -#if defined(CONFIG_HIGHMEM) && defined(CONFIG_HAVE_MEMBLOCK_NODE) +#if defined(CONFIG_HIGHMEM) && defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) return movable_zone == ZONE_HIGHMEM; #else return 0; -- cgit v1.2.3 From 8e125cd85517c9716695b0abfabc0a4a3fcb94f3 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 31 Jul 2012 16:43:16 -0700 Subject: vmscan: remove obsolete shrink_control comment 09f363c7 ("vmscan: fix shrinker callback bug in fs/super.c") fixed a shrinker callback which was returning -1 when nr_to_scan is zero, which caused excessive slab scanning. But 635697c6 ("vmscan: fix initial shrinker size handling") fixed the problem, again so we can freely return -1 although nr_to_scan is zero. So let's revert 09f363c7 because the comment added in 09f363c7 made an unnecessary rule. Signed-off-by: Minchan Kim Cc: Al Viro Cc: Mikulas Patocka Cc: Konstantin Khlebnikov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/shrinker.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h index 07ceb97d53fa..ac6b8ee07825 100644 --- a/include/linux/shrinker.h +++ b/include/linux/shrinker.h @@ -20,7 +20,6 @@ struct shrink_control { * 'nr_to_scan' entries and attempt to free them up. It should return * the number of objects which remain in the cache. If it returns -1, it means * it cannot do any scanning at this time (eg. there is a risk of deadlock). - * The callback must not return -1 if nr_to_scan is zero. * * The 'gfpmask' refers to the allocation we are currently trying to * fulfil. -- cgit v1.2.3 From 9adb62a5df9c0fbef7b4665919329f73a34651ed Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Tue, 31 Jul 2012 16:43:28 -0700 Subject: mm/hotplug: correctly setup fallback zonelists when creating new pgdat When hotadd_new_pgdat() is called to create new pgdat for a new node, a fallback zonelist should be created for the new node. There's code to try to achieve that in hotadd_new_pgdat() as below: /* * The node we allocated has no zone fallback lists. For avoiding * to access not-initialized zonelist, build here. */ mutex_lock(&zonelists_mutex); build_all_zonelists(pgdat, NULL); mutex_unlock(&zonelists_mutex); But it doesn't work as expected. When hotadd_new_pgdat() is called, the new node is still in offline state because node_set_online(nid) hasn't been called yet. And build_all_zonelists() only builds zonelists for online nodes as: for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); build_zonelists(pgdat); build_zonelist_cache(pgdat); } Though we hope to create zonelist for the new pgdat, but it doesn't. So add a new parameter "pgdat" the build_all_zonelists() to build pgdat for the new pgdat too. Signed-off-by: Jiang Liu Signed-off-by: Xishi Qiu Cc: Mel Gorman Cc: Michal Hocko Cc: Minchan Kim Cc: Rusty Russell Cc: Yinghai Lu Cc: Tony Luck Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: David Rientjes Cc: Keping Chen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index f64afa5929fe..98f079bcf399 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -721,7 +721,7 @@ typedef struct pglist_data { #include extern struct mutex zonelists_mutex; -void build_all_zonelists(void *data); +void build_all_zonelists(pg_data_t *pgdat, struct zone *zone); void wakeup_kswapd(struct zone *zone, int order, enum zone_type classzone_idx); bool zone_watermark_ok(struct zone *z, int order, unsigned long mark, int classzone_idx, int alloc_flags); -- cgit v1.2.3 From 340175b7d14d5617559d0c1a54fa0ea204d9edcd Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Tue, 31 Jul 2012 16:43:32 -0700 Subject: mm/hotplug: free zone->pageset when a zone becomes empty When a zone becomes empty after memory offlining, free zone->pageset. Otherwise it will cause memory leak when adding memory to the empty zone again because build_all_zonelists() will allocate zone->pageset for an empty zone. Signed-off-by: Jiang Liu Signed-off-by: Wei Wang Cc: Mel Gorman Cc: Michal Hocko Cc: Minchan Kim Cc: Rusty Russell Cc: Yinghai Lu Cc: Tony Luck Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: David Rientjes Cc: Keping Chen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 3955bedeeed1..7c6dfd2faa69 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1331,6 +1331,7 @@ void warn_alloc_failed(gfp_t gfp_mask, int order, const char *fmt, ...); extern void setup_per_cpu_pageset(void); extern void zone_pcp_update(struct zone *zone); +extern void zone_pcp_reset(struct zone *zone); /* nommu.c */ extern atomic_long_t mmap_pages_allocated; -- cgit v1.2.3 From 62ce1c706f817cb9defef3ac2dfdd815149f2968 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 31 Jul 2012 16:43:39 -0700 Subject: mm, oom: move declaration for mem_cgroup_out_of_memory to oom.h mem_cgroup_out_of_memory() is defined in mm/oom_kill.c, so declare it in linux/oom.h rather than linux/memcontrol.h. Acked-by: KAMEZAWA Hiroyuki Acked-by: KOSAKI Motohiro Acked-by: Michal Hocko Signed-off-by: David Rientjes Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 2 -- include/linux/oom.h | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 170076222431..c0bff8976a69 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -72,8 +72,6 @@ extern void mem_cgroup_uncharge_end(void); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, - int order); bool __mem_cgroup_same_or_subtree(const struct mem_cgroup *root_memcg, struct mem_cgroup *memcg); int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg); diff --git a/include/linux/oom.h b/include/linux/oom.h index e4c29bc72e70..eb9dc14362c5 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -49,6 +49,8 @@ extern unsigned long oom_badness(struct task_struct *p, extern int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); extern void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); +extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, + int order); extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order, nodemask_t *mask, bool force_kill); extern int register_oom_notifier(struct notifier_block *nb); -- cgit v1.2.3 From 9cbb78bb314360a860a8b23723971cb6fcb54176 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 31 Jul 2012 16:43:44 -0700 Subject: mm, memcg: introduce own oom handler to iterate only over its own threads The global oom killer is serialized by the per-zonelist try_set_zonelist_oom() which is used in the page allocator. Concurrent oom kills are thus a rare event and only occur in systems using mempolicies and with a large number of nodes. Memory controller oom kills, however, can frequently be concurrent since there is no serialization once the oom killer is called for oom conditions in several different memcgs in parallel. This creates a massive contention on tasklist_lock since the oom killer requires the readside for the tasklist iteration. If several memcgs are calling the oom killer, this lock can be held for a substantial amount of time, especially if threads continue to enter it as other threads are exiting. Since the exit path grabs the writeside of the lock with irqs disabled in a few different places, this can cause a soft lockup on cpus as a result of tasklist_lock starvation. The kernel lacks unfair writelocks, and successful calls to the oom killer usually result in at least one thread entering the exit path, so an alternative solution is needed. This patch introduces a seperate oom handler for memcgs so that they do not require tasklist_lock for as much time. Instead, it iterates only over the threads attached to the oom memcg and grabs a reference to the selected thread before calling oom_kill_process() to ensure it doesn't prematurely exit. This still requires tasklist_lock for the tasklist dump, iterating children of the selected process, and killing all other threads on the system sharing the same memory as the selected victim. So while this isn't a complete solution to tasklist_lock starvation, it significantly reduces the amount of time that it is held. Acked-by: KAMEZAWA Hiroyuki Acked-by: Michal Hocko Signed-off-by: David Rientjes Cc: Oleg Nesterov Cc: KOSAKI Motohiro Reviewed-by: Sha Zhengju Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 9 ++------- include/linux/oom.h | 16 ++++++++++++++++ 2 files changed, 18 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index c0bff8976a69..2a80544aec99 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -180,7 +180,8 @@ static inline void mem_cgroup_dec_page_stat(struct page *page, unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, gfp_t gfp_mask, unsigned long *total_scanned); -u64 mem_cgroup_get_limit(struct mem_cgroup *memcg); +extern void __mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, + int order); void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx); #ifdef CONFIG_TRANSPARENT_HUGEPAGE @@ -364,12 +365,6 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, return 0; } -static inline -u64 mem_cgroup_get_limit(struct mem_cgroup *memcg) -{ - return 0; -} - static inline void mem_cgroup_split_huge_fixup(struct page *head) { } diff --git a/include/linux/oom.h b/include/linux/oom.h index eb9dc14362c5..5dc0e384ae9e 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -40,17 +40,33 @@ enum oom_constraint { CONSTRAINT_MEMCG, }; +enum oom_scan_t { + OOM_SCAN_OK, /* scan thread and find its badness */ + OOM_SCAN_CONTINUE, /* do not consider thread for oom kill */ + OOM_SCAN_ABORT, /* abort the iteration and return */ + OOM_SCAN_SELECT, /* always select this thread first */ +}; + extern void compare_swap_oom_score_adj(int old_val, int new_val); extern int test_set_oom_score_adj(int new_val); extern unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg, const nodemask_t *nodemask, unsigned long totalpages); +extern void oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order, + unsigned int points, unsigned long totalpages, + struct mem_cgroup *memcg, nodemask_t *nodemask, + const char *message); + extern int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); extern void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); +extern enum oom_scan_t oom_scan_process_thread(struct task_struct *task, + unsigned long totalpages, const nodemask_t *nodemask, + bool force_kill); extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, int order); + extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order, nodemask_t *mask, bool force_kill); extern int register_oom_notifier(struct notifier_block *nb); -- cgit v1.2.3 From 876aafbfd9ba5bb352f1b14622c27f3fe9a99013 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 31 Jul 2012 16:43:48 -0700 Subject: mm, memcg: move all oom handling to memcontrol.c By globally defining check_panic_on_oom(), the memcg oom handler can be moved entirely to mm/memcontrol.c. This removes the ugly #ifdef in the oom killer and cleans up the code. Signed-off-by: David Rientjes Cc: KAMEZAWA Hiroyuki Acked-by: Michal Hocko Cc: Oleg Nesterov Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 2 -- include/linux/oom.h | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 2a80544aec99..5a3ee6423634 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -180,8 +180,6 @@ static inline void mem_cgroup_dec_page_stat(struct page *page, unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, gfp_t gfp_mask, unsigned long *total_scanned); -extern void __mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, - int order); void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx); #ifdef CONFIG_TRANSPARENT_HUGEPAGE diff --git a/include/linux/oom.h b/include/linux/oom.h index 5dc0e384ae9e..49a3031fda50 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -61,6 +61,9 @@ extern void oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order, extern int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); extern void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); +extern void check_panic_on_oom(enum oom_constraint constraint, gfp_t gfp_mask, + int order, const nodemask_t *nodemask); + extern enum oom_scan_t oom_scan_process_thread(struct task_struct *task, unsigned long totalpages, const nodemask_t *nodemask, bool force_kill); -- cgit v1.2.3 From ee6f509c3274014d1f52e7a7a10aee9f85393c5e Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 31 Jul 2012 16:43:50 -0700 Subject: mm: factor out memory isolate functions mm/page_alloc.c has some memory isolation functions but they are used only when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. So let's make it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. Signed-off-by: Minchan Kim Cc: Andi Kleen Cc: Marek Szyprowski Acked-by: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: Mel Gorman Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/page-isolation.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h index 3bdcab30ca41..105077aa7685 100644 --- a/include/linux/page-isolation.h +++ b/include/linux/page-isolation.h @@ -1,6 +1,11 @@ #ifndef __LINUX_PAGEISOLATION_H #define __LINUX_PAGEISOLATION_H + +bool has_unmovable_pages(struct zone *zone, struct page *page, int count); +void set_pageblock_migratetype(struct page *page, int migratetype); +int move_freepages_block(struct zone *zone, struct page *page, + int migratetype); /* * Changes migrate type in [start_pfn, end_pfn) to be MIGRATE_ISOLATE. * If specified range includes migrate types other than MOVABLE or CMA, @@ -10,7 +15,7 @@ * free all pages in the range. test_page_isolated() can be used for * test it. */ -extern int +int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, unsigned migratetype); @@ -18,7 +23,7 @@ start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, * Changes MIGRATE_ISOLATE to MIGRATE_MOVABLE. * target range is [start_pfn, end_pfn) */ -extern int +int undo_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, unsigned migratetype); @@ -30,8 +35,8 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn); /* * Internal functions. Changes pageblock's migrate type. */ -extern int set_migratetype_isolate(struct page *page); -extern void unset_migratetype_isolate(struct page *page, unsigned migratetype); +int set_migratetype_isolate(struct page *page); +void unset_migratetype_isolate(struct page *page, unsigned migratetype); #endif -- cgit v1.2.3 From 702d1a6e0766d45642c934444fd41f658d251305 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 31 Jul 2012 16:43:56 -0700 Subject: memory-hotplug: fix kswapd looping forever problem When hotplug offlining happens on zone A, it starts to mark freed page as MIGRATE_ISOLATE type in buddy for preventing further allocation. (MIGRATE_ISOLATE is very irony type because it's apparently on buddy but we can't allocate them). When the memory shortage happens during hotplug offlining, current task starts to reclaim, then wake up kswapd. Kswapd checks watermark, then go sleep because current zone_watermark_ok_safe doesn't consider MIGRATE_ISOLATE freed page count. Current task continue to reclaim in direct reclaim path without kswapd's helping. The problem is that zone->all_unreclaimable is set by only kswapd so that current task would be looping forever like below. __alloc_pages_slowpath restart: wake_all_kswapd rebalance: __alloc_pages_direct_reclaim do_try_to_free_pages if global_reclaim && !all_unreclaimable return 1; /* It means we did did_some_progress */ skip __alloc_pages_may_oom should_alloc_retry goto rebalance; If we apply KOSAKI's patch[1] which doesn't depends on kswapd about setting zone->all_unreclaimable, we can solve this problem by killing some task in direct reclaim path. But it doesn't wake up kswapd, still. It could be a problem still if other subsystem needs GFP_ATOMIC request. So kswapd should consider MIGRATE_ISOLATE when it calculate free pages BEFORE going sleep. This patch counts the number of MIGRATE_ISOLATE page block and zone_watermark_ok_safe will consider it if the system has such blocks (fortunately, it's very rare so no problem in POV overhead and kswapd is never hotpath). Copy/modify from Mel's quote " Ideal solution would be "allocating" the pageblock. It would keep the free space accounting as it is but historically, memory hotplug didn't allocate pages because it would be difficult to detect if a pageblock was isolated or if part of some balloon. Allocating just full pageblocks would work around this, However, it would play very badly with CMA. " [1] http://lkml.org/lkml/2012/6/14/74 [akpm@linux-foundation.org: simplify nr_zone_isolate_freepages(), rework zone_watermark_ok_safe() comment, simplify set_pageblock_isolate() and restore_pageblock_isolate()] [akpm@linux-foundation.org: fix CONFIG_MEMORY_ISOLATION=n build] Signed-off-by: Minchan Kim Suggested-by: KOSAKI Motohiro Tested-by: Aaditya Kumar Cc: KAMEZAWA Hiroyuki Cc: Mel Gorman Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 98f079bcf399..64b2c3a48286 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -478,6 +478,14 @@ struct zone { * rarely used fields: */ const char *name; +#ifdef CONFIG_MEMORY_ISOLATION + /* + * the number of MIGRATE_ISOLATE *pageblock*. + * We need this for free page counting. Look at zone_watermark_ok_safe. + * It's protected by zone->lock + */ + int nr_pageblock_isolate; +#endif } ____cacheline_internodealigned_in_smp; typedef enum { -- cgit v1.2.3 From 072bb0aa5e062902968c5c1007bba332c7820cf4 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:43:58 -0700 Subject: mm: sl[au]b: add knowledge of PFMEMALLOC reserve pages When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. Swap over the network is considered as an option in diskless systems. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap according to the manual at https://sourceforge.net/projects/ltsp/files/Docs-Admin-Guide/LTSPManual.pdf/download There is also documentation and tutorials on how to setup swap over NBD at places like https://help.ubuntu.com/community/UbuntuLTSP/EnableNBDSWAP The nbd-client also documents the use of NBD as swap. Despite this, the fact is that a machine using NBD for swap can deadlock within minutes if swap is used intensively. This patch series addresses the problem. The core issue is that network block devices do not use mempools like normal block devices do. As the host cannot control where they receive packets from, they cannot reliably work out in advance how much memory they might need. Some years ago, Peter Zijlstra developed a series of patches that supported swap over an NFS that at least one distribution is carrying within their kernels. This patch series borrows very heavily from Peter's work to support swapping over NBD as a pre-requisite to supporting swap-over-NFS. The bulk of the complexity is concerned with preserving memory that is allocated from the PFMEMALLOC reserves for use by the network layer which is needed for both NBD and NFS. Patch 1 adds knowledge of the PFMEMALLOC reserves to SLAB and SLUB to preserve access to pages allocated under low memory situations to callers that are freeing memory. Patch 2 optimises the SLUB fast path to avoid pfmemalloc checks Patch 3 introduces __GFP_MEMALLOC to allow access to the PFMEMALLOC reserves without setting PFMEMALLOC. Patch 4 opens the possibility for softirqs to use PFMEMALLOC reserves for later use by network packet processing. Patch 5 only sets page->pfmemalloc when ALLOC_NO_WATERMARKS was required Patch 6 ignores memory policies when ALLOC_NO_WATERMARKS is set. Patches 7-12 allows network processing to use PFMEMALLOC reserves when the socket has been marked as being used by the VM to clean pages. If packets are received and stored in pages that were allocated under low-memory situations and are unrelated to the VM, the packets are dropped. Patch 11 reintroduces __skb_alloc_page which the networking folk may object to but is needed in some cases to propogate pfmemalloc from a newly allocated page to an skb. If there is a strong objection, this patch can be dropped with the impact being that swap-over-network will be slower in some cases but it should not fail. Patch 13 is a micro-optimisation to avoid a function call in the common case. Patch 14 tags NBD sockets as being SOCK_MEMALLOC so they can use PFMEMALLOC if necessary. Patch 15 notes that it is still possible for the PFMEMALLOC reserve to be depleted. To prevent this, direct reclaimers get throttled on a waitqueue if 50% of the PFMEMALLOC reserves are depleted. It is expected that kswapd and the direct reclaimers already running will clean enough pages for the low watermark to be reached and the throttled processes are woken up. Patch 16 adds a statistic to track how often processes get throttled Some basic performance testing was run using kernel builds, netperf on loopback for UDP and TCP, hackbench (pipes and sockets), iozone and sysbench. Each of them were expected to use the sl*b allocators reasonably heavily but there did not appear to be significant performance variances. For testing swap-over-NBD, a machine was booted with 2G of RAM with a swapfile backed by NBD. 8*NUM_CPU processes were started that create anonymous memory mappings and read them linearly in a loop. The total size of the mappings were 4*PHYSICAL_MEMORY to use swap heavily under memory pressure. Without the patches and using SLUB, the machine locks up within minutes and runs to completion with them applied. With SLAB, the story is different as an unpatched kernel run to completion. However, the patched kernel completed the test 45% faster. MICRO 3.5.0-rc2 3.5.0-rc2 vanilla swapnbd Unrecognised test vmscan-anon-mmap-write MMTests Statistics: duration Sys Time Running Test (seconds) 197.80 173.07 User+Sys Time Running Test (seconds) 206.96 182.03 Total Elapsed Time (seconds) 3240.70 1762.09 This patch: mm: sl[au]b: add knowledge of PFMEMALLOC reserve pages Allocations of pages below the min watermark run a risk of the machine hanging due to a lack of memory. To prevent this, only callers who have PF_MEMALLOC or TIF_MEMDIE set and are not processing an interrupt are allowed to allocate with ALLOC_NO_WATERMARKS. Once they are allocated to a slab though, nothing prevents other callers consuming free objects within those slabs. This patch limits access to slab pages that were alloced from the PFMEMALLOC reserves. When this patch is applied, pages allocated from below the low watermark are returned with page->pfmemalloc set and it is up to the caller to determine how the page should be protected. SLAB restricts access to any page with page->pfmemalloc set to callers which are known to able to access the PFMEMALLOC reserve. If one is not available, an attempt is made to allocate a new page rather than use a reserve. SLUB is a bit more relaxed in that it only records if the current per-CPU page was allocated from PFMEMALLOC reserve and uses another partial slab if the caller does not have the necessary GFP or process flags. This was found to be sufficient in tests to avoid hangs due to SLUB generally maintaining smaller lists than SLAB. In low-memory conditions it does mean that !PFMEMALLOC allocators can fail a slab allocation even though free objects are available because they are being preserved for callers that are freeing pages. [a.p.zijlstra@chello.nl: Original implementation] [sebastian@breakpoint.cc: Correct order of page flag clearing] Signed-off-by: Mel Gorman Cc: David Miller Cc: Neil Brown Cc: Peter Zijlstra Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_types.h | 9 +++++++++ include/linux/page-flags.h | 29 +++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 074eb98fe15d..375e79eb009b 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -54,6 +54,15 @@ struct page { union { pgoff_t index; /* Our offset within mapping. */ void *freelist; /* slub/slob first free object */ + bool pfmemalloc; /* If set by the page allocator, + * ALLOC_PFMEMALLOC was set + * and the low watermark was not + * met implying that the system + * is under some pressure. The + * caller should try ensure + * this page is only used to + * free other pages. + */ }; union { diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index c88d2a9451af..b5d13841604e 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -7,6 +7,7 @@ #include #include +#include #ifndef __GENERATING_BOUNDS_H #include #include @@ -453,6 +454,34 @@ static inline int PageTransTail(struct page *page) } #endif +/* + * If network-based swap is enabled, sl*b must keep track of whether pages + * were allocated from pfmemalloc reserves. + */ +static inline int PageSlabPfmemalloc(struct page *page) +{ + VM_BUG_ON(!PageSlab(page)); + return PageActive(page); +} + +static inline void SetPageSlabPfmemalloc(struct page *page) +{ + VM_BUG_ON(!PageSlab(page)); + SetPageActive(page); +} + +static inline void __ClearPageSlabPfmemalloc(struct page *page) +{ + VM_BUG_ON(!PageSlab(page)); + __ClearPageActive(page); +} + +static inline void ClearPageSlabPfmemalloc(struct page *page) +{ + VM_BUG_ON(!PageSlab(page)); + ClearPageActive(page); +} + #ifdef CONFIG_MMU #define __PG_MLOCKED (1 << PG_mlocked) #else -- cgit v1.2.3 From b37f1dd0f543d9714f96c2f9b9f74f7bdfdfdf31 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:03 -0700 Subject: mm: introduce __GFP_MEMALLOC to allow access to emergency reserves __GFP_MEMALLOC will allow the allocation to disregard the watermarks, much like PF_MEMALLOC. It allows one to pass along the memalloc state in object related allocation flags as opposed to task related flags, such as sk->sk_allocation. This removes the need for ALLOC_PFMEMALLOC as callers using __GFP_MEMALLOC can get the ALLOC_NO_WATERMARK flag which is now enough to identify allocations related to page reclaim. Signed-off-by: Peter Zijlstra Signed-off-by: Mel Gorman Cc: David Miller Cc: Neil Brown Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 10 ++++++++-- include/linux/mm_types.h | 2 +- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 1e49be49d324..cbd7400e5862 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -23,6 +23,7 @@ struct vm_area_struct; #define ___GFP_REPEAT 0x400u #define ___GFP_NOFAIL 0x800u #define ___GFP_NORETRY 0x1000u +#define ___GFP_MEMALLOC 0x2000u #define ___GFP_COMP 0x4000u #define ___GFP_ZERO 0x8000u #define ___GFP_NOMEMALLOC 0x10000u @@ -76,9 +77,14 @@ struct vm_area_struct; #define __GFP_REPEAT ((__force gfp_t)___GFP_REPEAT) /* See above */ #define __GFP_NOFAIL ((__force gfp_t)___GFP_NOFAIL) /* See above */ #define __GFP_NORETRY ((__force gfp_t)___GFP_NORETRY) /* See above */ +#define __GFP_MEMALLOC ((__force gfp_t)___GFP_MEMALLOC)/* Allow access to emergency reserves */ #define __GFP_COMP ((__force gfp_t)___GFP_COMP) /* Add compound page metadata */ #define __GFP_ZERO ((__force gfp_t)___GFP_ZERO) /* Return zeroed page on success */ -#define __GFP_NOMEMALLOC ((__force gfp_t)___GFP_NOMEMALLOC) /* Don't use emergency reserves */ +#define __GFP_NOMEMALLOC ((__force gfp_t)___GFP_NOMEMALLOC) /* Don't use emergency reserves. + * This takes precedence over the + * __GFP_MEMALLOC flag if both are + * set + */ #define __GFP_HARDWALL ((__force gfp_t)___GFP_HARDWALL) /* Enforce hardwall cpuset memory allocs */ #define __GFP_THISNODE ((__force gfp_t)___GFP_THISNODE)/* No fallback, no policies */ #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ @@ -129,7 +135,7 @@ struct vm_area_struct; /* Control page allocator reclaim behavior */ #define GFP_RECLAIM_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS|\ __GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\ - __GFP_NORETRY|__GFP_NOMEMALLOC) + __GFP_NORETRY|__GFP_MEMALLOC|__GFP_NOMEMALLOC) /* Control slab gfp mask during early boot */ #define GFP_BOOT_MASK (__GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS)) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 375e79eb009b..bf7867200b95 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -55,7 +55,7 @@ struct page { pgoff_t index; /* Our offset within mapping. */ void *freelist; /* slub/slob first free object */ bool pfmemalloc; /* If set by the page allocator, - * ALLOC_PFMEMALLOC was set + * ALLOC_NO_WATERMARKS was set * and the low watermark was not * met implying that the system * is under some pressure. The -- cgit v1.2.3 From 907aed48f65efeecf91575397e3d79335d93a466 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:07 -0700 Subject: mm: allow PF_MEMALLOC from softirq context This is needed to allow network softirq packet processing to make use of PF_MEMALLOC. Currently softirq context cannot use PF_MEMALLOC due to it not being associated with a task, and therefore not having task flags to fiddle with - thus the gfp to alloc flag mapping ignores the task flags when in interrupts (hard or soft) context. Allowing softirqs to make use of PF_MEMALLOC therefore requires some trickery. This patch borrows the task flags from whatever process happens to be preempted by the softirq. It then modifies the gfp to alloc flags mapping to not exclude task flags in softirq context, and modify the softirq code to save, clear and restore the PF_MEMALLOC flag. The save and clear, ensures the preempted task's PF_MEMALLOC flag doesn't leak into the softirq. The restore ensures a softirq's PF_MEMALLOC flag cannot leak back into the preempted process. This should be safe due to the following reasons Softirqs can run on multiple CPUs sure but the same task should not be executing the same softirq code. Neither should the softirq handler be preempted by any other softirq handler so the flags should not leak to an unrelated softirq. Softirqs re-enable hardware interrupts in __do_softirq() so can be preempted by hardware interrupts so PF_MEMALLOC is inherited by the hard IRQ. However, this is similar to a process in reclaim being preempted by a hardirq. While PF_MEMALLOC is set, gfp_to_alloc_flags() distinguishes between hard and soft irqs and avoids giving a hardirq the ALLOC_NO_WATERMARKS flag. If the softirq is deferred to ksoftirq then its flags may be used instead of a normal tasks but as the softirq cannot be preempted, the PF_MEMALLOC flag does not leak to other code by accident. [davem@davemloft.net: Document why PF_MEMALLOC is safe] Signed-off-by: Peter Zijlstra Signed-off-by: Mel Gorman Cc: David Miller Cc: Neil Brown Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 865725adb9d3..c147e7024f11 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1894,6 +1894,13 @@ static inline void rcu_copy_process(struct task_struct *p) #endif +static inline void tsk_restore_flags(struct task_struct *task, + unsigned long orig_flags, unsigned long flags) +{ + task->flags &= ~flags; + task->flags |= orig_flags & flags; +} + #ifdef CONFIG_SMP extern void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask); -- cgit v1.2.3 From c93bdd0e03e848555d144eb44a1f275b871a8dd5 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:19 -0700 Subject: netvm: allow skb allocation to use PFMEMALLOC reserves Change the skb allocation API to indicate RX usage and use this to fall back to the PFMEMALLOC reserve when needed. SKBs allocated from the reserve are tagged in skb->pfmemalloc. If an SKB is allocated from the reserve and the socket is later found to be unrelated to page reclaim, the packet is dropped so that the memory remains available for page reclaim. Network protocols are expected to recover from this packet loss. [a.p.zijlstra@chello.nl: Ideas taken from various patches] [davem@davemloft.net: Use static branches, coding style corrections] [sebastian@breakpoint.cc: Avoid unnecessary cast, fix !CONFIG_NET build] Signed-off-by: Mel Gorman Acked-by: David S. Miller Cc: Neil Brown Cc: Peter Zijlstra Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 3 +++ include/linux/skbuff.h | 14 ++++++++++++-- 2 files changed, 15 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index cbd7400e5862..4883f393f50a 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -385,6 +385,9 @@ void drain_local_pages(void *dummy); */ extern gfp_t gfp_allowed_mask; +/* Returns true if the gfp_mask allows use of ALLOC_NO_WATERMARK */ +bool gfp_pfmemalloc_allowed(gfp_t gfp_mask); + extern void pm_restrict_gfp_mask(void); extern void pm_restore_gfp_mask(void); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index d205c4be7f5b..0336f02e3667 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -462,6 +462,7 @@ struct sk_buff { #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif + __u8 pfmemalloc:1; __u8 ooo_okay:1; __u8 l4_rxhash:1; __u8 wifi_acked_valid:1; @@ -502,6 +503,15 @@ struct sk_buff { #include +#define SKB_ALLOC_FCLONE 0x01 +#define SKB_ALLOC_RX 0x02 + +/* Returns true if the skb was allocated from PFMEMALLOC reserves */ +static inline bool skb_pfmemalloc(const struct sk_buff *skb) +{ + return unlikely(skb->pfmemalloc); +} + /* * skb might have a dst pointer attached, refcounted or not. * _skb_refdst low order bit is set if refcount was _not_ taken @@ -565,7 +575,7 @@ extern bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from, bool *fragstolen, int *delta_truesize); extern struct sk_buff *__alloc_skb(unsigned int size, - gfp_t priority, int fclone, int node); + gfp_t priority, int flags, int node); extern struct sk_buff *build_skb(void *data, unsigned int frag_size); static inline struct sk_buff *alloc_skb(unsigned int size, gfp_t priority) @@ -576,7 +586,7 @@ static inline struct sk_buff *alloc_skb(unsigned int size, static inline struct sk_buff *alloc_skb_fclone(unsigned int size, gfp_t priority) { - return __alloc_skb(size, priority, 1, NUMA_NO_NODE); + return __alloc_skb(size, priority, SKB_ALLOC_FCLONE, NUMA_NO_NODE); } extern void skb_recycle(struct sk_buff *skb); -- cgit v1.2.3 From c48a11c7ad2623b99bbd6859b0b4234e7f11176f Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:23 -0700 Subject: netvm: propagate page->pfmemalloc to skb The skb->pfmemalloc flag gets set to true iff during the slab allocation of data in __alloc_skb that the the PFMEMALLOC reserves were used. If the packet is fragmented, it is possible that pages will be allocated from the PFMEMALLOC reserve without propagating this information to the skb. This patch propagates page->pfmemalloc from pages allocated for fragments to the skb. Signed-off-by: Mel Gorman Acked-by: David S. Miller Cc: Neil Brown Cc: Peter Zijlstra Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/skbuff.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 0336f02e3667..b814bb8fd5ab 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1247,6 +1247,17 @@ static inline void __skb_fill_page_desc(struct sk_buff *skb, int i, { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + /* + * Propagate page->pfmemalloc to the skb if we can. The problem is + * that not all callers have unique ownership of the page. If + * pfmemalloc is set, we check the mapping as a mapping implies + * page->index is set (index and pfmemalloc share space). + * If it's a valid mapping, we cannot use page->pfmemalloc but we + * do not lose pfmemalloc information as the pages would not be + * allocated using __GFP_MEMALLOC. + */ + if (page->pfmemalloc && !page->mapping) + skb->pfmemalloc = true; frag->page.p = page; frag->page_offset = off; skb_frag_size_set(frag, size); -- cgit v1.2.3 From 0614002bb5f7411e61ffa0dfe5be1f2c84df3da3 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:24 -0700 Subject: netvm: propagate page->pfmemalloc from skb_alloc_page to skb The skb->pfmemalloc flag gets set to true iff during the slab allocation of data in __alloc_skb that the the PFMEMALLOC reserves were used. If page splitting is used, it is possible that pages will be allocated from the PFMEMALLOC reserve without propagating this information to the skb. This patch propagates page->pfmemalloc from pages allocated for fragments to the skb. It works by reintroducing and expanding the skb_alloc_page() API to take an skb. If the page was allocated from pfmemalloc reserves, it is automatically copied. If the driver allocates the page before the skb, it should call skb_propagate_pfmemalloc() after the skb is allocated to ensure the flag is copied properly. Failure to do so is not critical. The resulting driver may perform slower if it is used for swap-over-NBD or swap-over-NFS but it should not result in failure. [davem@davemloft.net: API rename and consistency] Signed-off-by: Mel Gorman Acked-by: David S. Miller Cc: Neil Brown Cc: Peter Zijlstra Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/skbuff.h | 55 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b814bb8fd5ab..7632c87da2c9 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1774,6 +1774,61 @@ static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev, return __netdev_alloc_skb_ip_align(dev, length, GFP_ATOMIC); } +/* + * __skb_alloc_page - allocate pages for ps-rx on a skb and preserve pfmemalloc data + * @gfp_mask: alloc_pages_node mask. Set __GFP_NOMEMALLOC if not for network packet RX + * @skb: skb to set pfmemalloc on if __GFP_MEMALLOC is used + * @order: size of the allocation + * + * Allocate a new page. + * + * %NULL is returned if there is no free memory. +*/ +static inline struct page *__skb_alloc_pages(gfp_t gfp_mask, + struct sk_buff *skb, + unsigned int order) +{ + struct page *page; + + gfp_mask |= __GFP_COLD; + + if (!(gfp_mask & __GFP_NOMEMALLOC)) + gfp_mask |= __GFP_MEMALLOC; + + page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, order); + if (skb && page && page->pfmemalloc) + skb->pfmemalloc = true; + + return page; +} + +/** + * __skb_alloc_page - allocate a page for ps-rx for a given skb and preserve pfmemalloc data + * @gfp_mask: alloc_pages_node mask. Set __GFP_NOMEMALLOC if not for network packet RX + * @skb: skb to set pfmemalloc on if __GFP_MEMALLOC is used + * + * Allocate a new page. + * + * %NULL is returned if there is no free memory. + */ +static inline struct page *__skb_alloc_page(gfp_t gfp_mask, + struct sk_buff *skb) +{ + return __skb_alloc_pages(gfp_mask, skb, 0); +} + +/** + * skb_propagate_pfmemalloc - Propagate pfmemalloc if skb is allocated after RX page + * @page: The page that was allocated from skb_alloc_page + * @skb: The skb that may need pfmemalloc set + */ +static inline void skb_propagate_pfmemalloc(struct page *page, + struct sk_buff *skb) +{ + if (page && page->pfmemalloc) + skb->pfmemalloc = true; +} + /** * skb_frag_page - retrieve the page refered to by a paged fragment * @frag: the paged fragment -- cgit v1.2.3 From 5515061d22f0f9976ae7815864bfd22042d36848 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:35 -0700 Subject: mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage If swap is backed by network storage such as NBD, there is a risk that a large number of reclaimers can hang the system by consuming all PF_MEMALLOC reserves. To avoid these hangs, the administrator must tune min_free_kbytes in advance which is a bit fragile. This patch throttles direct reclaimers if half the PF_MEMALLOC reserves are in use. If the system is routinely getting throttled the system administrator can increase min_free_kbytes so degradation is smoother but the system will keep running. Signed-off-by: Mel Gorman Cc: David Miller Cc: Neil Brown Cc: Peter Zijlstra Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 64b2c3a48286..2daa54f55db7 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -705,6 +705,7 @@ typedef struct pglist_data { range, including holes */ int node_id; wait_queue_head_t kswapd_wait; + wait_queue_head_t pfmemalloc_wait; struct task_struct *kswapd; /* Protected by lock_memory_hotplug() */ int kswapd_max_order; enum zone_type classzone_idx; -- cgit v1.2.3 From 68243e76ee343d63c6cf76978588a885951e2818 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:39 -0700 Subject: mm: account for the number of times direct reclaimers get throttled Under significant pressure when writing back to network-backed storage, direct reclaimers may get throttled. This is expected to be a short-lived event and the processes get woken up again but processes do get stalled. This patch counts how many times such stalling occurs. It's up to the administrator whether to reduce these stalls by increasing min_free_kbytes. Signed-off-by: Mel Gorman Cc: David Miller Cc: Neil Brown Cc: Peter Zijlstra Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vm_event_item.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h index 06f8e3858251..57f7b1091511 100644 --- a/include/linux/vm_event_item.h +++ b/include/linux/vm_event_item.h @@ -30,6 +30,7 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, FOR_ALL_ZONES(PGSTEAL_DIRECT), FOR_ALL_ZONES(PGSCAN_KSWAPD), FOR_ALL_ZONES(PGSCAN_DIRECT), + PGSCAN_DIRECT_THROTTLE, #ifdef CONFIG_NUMA PGSCAN_ZONE_RECLAIM_FAILED, #endif -- cgit v1.2.3 From f981c5950fa85916ba49bea5d9a7a5078f47e569 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:47 -0700 Subject: mm: methods for teaching filesystems about PG_swapcache pages In order to teach filesystems to handle swap cache pages, three new page functions are introduced: pgoff_t page_file_index(struct page *); loff_t page_file_offset(struct page *); struct address_space *page_file_mapping(struct page *); page_file_index() - gives the offset of this page in the file in PAGE_CACHE_SIZE blocks. Like page->index is for mapped pages, this function also gives the correct index for PG_swapcache pages. page_file_offset() - uses page_file_index(), so that it will give the expected result, even for PG_swapcache pages. page_file_mapping() - gives the mapping backing the actual page; that is for swap cache pages it will give swap_file->f_mapping. Signed-off-by: Peter Zijlstra Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Christoph Hellwig Cc: David S. Miller Cc: Eric B Munson Cc: Eric Paris Cc: James Morris Cc: Mel Gorman Cc: Mike Christie Cc: Neil Brown Cc: Sebastian Andrzej Siewior Cc: Trond Myklebust Cc: Xiaotian Feng Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 25 +++++++++++++++++++++++++ include/linux/pagemap.h | 5 +++++ include/linux/swap.h | 1 + 3 files changed, 31 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 7c6dfd2faa69..7cdac1676b59 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -805,6 +805,17 @@ static inline void *page_rmapping(struct page *page) return (void *)((unsigned long)page->mapping & ~PAGE_MAPPING_FLAGS); } +extern struct address_space *__page_file_mapping(struct page *); + +static inline +struct address_space *page_file_mapping(struct page *page) +{ + if (unlikely(PageSwapCache(page))) + return __page_file_mapping(page); + + return page->mapping; +} + static inline int PageAnon(struct page *page) { return ((unsigned long)page->mapping & PAGE_MAPPING_ANON) != 0; @@ -821,6 +832,20 @@ static inline pgoff_t page_index(struct page *page) return page->index; } +extern pgoff_t __page_file_index(struct page *page); + +/* + * Return the file index of the page. Regular pagecache pages use ->index + * whereas swapcache pages use swp_offset(->private) + */ +static inline pgoff_t page_file_index(struct page *page) +{ + if (unlikely(PageSwapCache(page))) + return __page_file_index(page); + + return page->index; +} + /* * Return true if this page is mapped into pagetables. */ diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 7cfad3bbb0cc..e42c762f0dc7 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -286,6 +286,11 @@ static inline loff_t page_offset(struct page *page) return ((loff_t)page->index) << PAGE_CACHE_SHIFT; } +static inline loff_t page_file_offset(struct page *page) +{ + return ((loff_t)page_file_index(page)) << PAGE_CACHE_SHIFT; +} + extern pgoff_t linear_hugepage_index(struct vm_area_struct *vma, unsigned long address); diff --git a/include/linux/swap.h b/include/linux/swap.h index 9a16bb1cefd1..e62425ded2ed 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -356,6 +356,7 @@ extern unsigned int count_swap_pages(int, int); extern sector_t map_swap_page(struct page *, struct block_device **); extern sector_t swapdev_block(int, pgoff_t); extern int page_swapcount(struct page *); +extern struct swap_info_struct *page_swap_info(struct page *); extern int reuse_swap_page(struct page *); extern int try_to_free_swap(struct page *); struct backing_dev_info; -- cgit v1.2.3 From 18022c5d8627a7a9ba8097a0f238b513fae6f5b8 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:51 -0700 Subject: mm: add get_kernel_page[s] for pinning of kernel addresses for I/O This patch adds two new APIs get_kernel_pages() and get_kernel_page() that may be used to pin a vector of kernel addresses for IO. The initial user is expected to be NFS for allowing pages to be written to swap using aops->direct_IO(). Strictly speaking, swap-over-NFS only needs to pin one page for IO but it makes sense to express the API in terms of a vector and add a helper for pinning single pages. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Christoph Hellwig Cc: David S. Miller Cc: Eric B Munson Cc: Eric Paris Cc: James Morris Cc: Mel Gorman Cc: Mike Christie Cc: Neil Brown Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Trond Myklebust Cc: Xiaotian Feng Cc: Mark Salter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/blk_types.h | 2 ++ include/linux/fs.h | 2 ++ include/linux/mm.h | 4 ++++ 3 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 0edb65dd8edd..7b7ac9ccec7a 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -160,6 +160,7 @@ enum rq_flag_bits { __REQ_FLUSH_SEQ, /* request for flush sequence */ __REQ_IO_STAT, /* account I/O stat */ __REQ_MIXED_MERGE, /* merge of different types, fail separately */ + __REQ_KERNEL, /* direct IO to kernel pages */ __REQ_NR_BITS, /* stops here */ }; @@ -201,5 +202,6 @@ enum rq_flag_bits { #define REQ_IO_STAT (1 << __REQ_IO_STAT) #define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE) #define REQ_SECURE (1 << __REQ_SECURE) +#define REQ_KERNEL (1 << __REQ_KERNEL) #endif /* __LINUX_BLK_TYPES_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 8fabb037a48d..9d77309da153 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -165,6 +165,8 @@ struct inodes_stat_t { #define READ 0 #define WRITE RW_MASK #define READA RWA_MASK +#define KERNEL_READ (READ|REQ_KERNEL) +#define KERNEL_WRITE (WRITE|REQ_KERNEL) #define READ_SYNC (READ | REQ_SYNC) #define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE) diff --git a/include/linux/mm.h b/include/linux/mm.h index 7cdac1676b59..bd079a1b0fdc 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1019,6 +1019,10 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, struct page **pages, struct vm_area_struct **vmas); int get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages); +struct kvec; +int get_kernel_pages(const struct kvec *iov, int nr_pages, int write, + struct page **pages); +int get_kernel_page(unsigned long start, int write, struct page **pages); struct page *get_dump_page(unsigned long addr); extern int try_to_release_page(struct page * page, gfp_t gfp_mask); -- cgit v1.2.3 From 62c230bc1790923a1b35da03596a68a6c9b5b100 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:55 -0700 Subject: mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman Acked-by: Rik van Riel Cc: Christoph Hellwig Cc: David S. Miller Cc: Eric B Munson Cc: Eric Paris Cc: James Morris Cc: Mel Gorman Cc: Mike Christie Cc: Neil Brown Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Trond Myklebust Cc: Xiaotian Feng Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 4 ++++ include/linux/swap.h | 2 ++ 2 files changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 9d77309da153..38356ab827c9 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -638,6 +638,10 @@ struct address_space_operations { int (*is_partially_uptodate) (struct page *, read_descriptor_t *, unsigned long); int (*error_remove_page)(struct address_space *, struct page *); + + /* swapfile support */ + int (*swap_activate)(struct file *file); + int (*swap_deactivate)(struct file *file); }; extern const struct address_space_operations empty_aops; diff --git a/include/linux/swap.h b/include/linux/swap.h index e62425ded2ed..ab230b1ebf61 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -151,6 +151,7 @@ enum { SWP_SOLIDSTATE = (1 << 4), /* blkdev seeks are cheap */ SWP_CONTINUED = (1 << 5), /* swap_map has count continuation */ SWP_BLKDEV = (1 << 6), /* its a block device */ + SWP_FILE = (1 << 7), /* set after swap_activate success */ /* add others here before... */ SWP_SCANNING = (1 << 8), /* refcount in scan_swap_map */ }; @@ -320,6 +321,7 @@ static inline void mem_cgroup_uncharge_swap(swp_entry_t ent) /* linux/mm/page_io.c */ extern int swap_readpage(struct page *); extern int swap_writepage(struct page *page, struct writeback_control *wbc); +extern int swap_set_page_dirty(struct page *page); extern void end_swap_bio_read(struct bio *bio, int err); /* linux/mm/swap_state.c */ -- cgit v1.2.3 From a509bc1a9e487d952d9404318f7f990166ab57a7 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:44:57 -0700 Subject: mm: swap: implement generic handler for swap_activate The version of swap_activate introduced is sufficient for swap-over-NFS but would not provide enough information to implement a generic handler. This patch shuffles things slightly to ensure the same information is available for aops->swap_activate() as is available to the core. No functionality change. Signed-off-by: Mel Gorman Acked-by: Rik van Riel Cc: Christoph Hellwig Cc: David S. Miller Cc: Eric B Munson Cc: Eric Paris Cc: James Morris Cc: Mel Gorman Cc: Mike Christie Cc: Neil Brown Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Trond Myklebust Cc: Xiaotian Feng Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 6 ++++-- include/linux/swap.h | 5 +++++ 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 38356ab827c9..c8667f8b5358 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -429,6 +429,7 @@ struct kstatfs; struct vm_area_struct; struct vfsmount; struct cred; +struct swap_info_struct; extern void __init inode_init(void); extern void __init inode_init_early(void); @@ -640,8 +641,9 @@ struct address_space_operations { int (*error_remove_page)(struct address_space *, struct page *); /* swapfile support */ - int (*swap_activate)(struct file *file); - int (*swap_deactivate)(struct file *file); + int (*swap_activate)(struct swap_info_struct *sis, struct file *file, + sector_t *span); + void (*swap_deactivate)(struct file *file); }; extern const struct address_space_operations empty_aops; diff --git a/include/linux/swap.h b/include/linux/swap.h index ab230b1ebf61..388e70601413 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -324,6 +324,11 @@ extern int swap_writepage(struct page *page, struct writeback_control *wbc); extern int swap_set_page_dirty(struct page *page); extern void end_swap_bio_read(struct bio *bio, int err); +int add_swap_extent(struct swap_info_struct *sis, unsigned long start_page, + unsigned long nr_pages, sector_t start_block); +int generic_swapfile_activate(struct swap_info_struct *, struct file *, + sector_t *); + /* linux/mm/swap_state.c */ extern struct address_space swapper_space; #define total_swapcache_pages swapper_space.nrpages -- cgit v1.2.3 From 5a178119b0fbe37f7dfb602b37df9cc4b1dc9d71 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:45:02 -0700 Subject: mm: add support for direct_IO to highmem pages The patch "mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages" added support for using direct_IO to write swap pages but it is insufficient for highmem pages. To support highmem pages, this patch kmaps() the page before calling the direct_IO() handler. As direct_IO deals with virtual addresses an additional helper is necessary for get_kernel_pages() to lookup the struct page for a kmap virtual address. Signed-off-by: Mel Gorman Acked-by: Rik van Riel Cc: Christoph Hellwig Cc: David S. Miller Cc: Eric B Munson Cc: Eric Paris Cc: James Morris Cc: Mel Gorman Cc: Mike Christie Cc: Neil Brown Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Trond Myklebust Cc: Xiaotian Feng Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/highmem.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 774fa47b3b5b..ef788b5b4a35 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -39,10 +39,17 @@ extern unsigned long totalhigh_pages; void kmap_flush_unused(void); +struct page *kmap_to_page(void *addr); + #else /* CONFIG_HIGHMEM */ static inline unsigned int nr_free_highpages(void) { return 0; } +static inline struct page *kmap_to_page(void *addr) +{ + return virt_to_page(addr); +} + #define totalhigh_pages 0UL #ifndef ARCH_HAS_KMAP -- cgit v1.2.3 From a564b8f0398636ba30b07c0eaebdef7ff7837249 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:45:12 -0700 Subject: nfs: enable swap on NFS Implement the new swapfile a_ops for NFS and hook up ->direct_IO. This will set the NFS socket to SOCK_MEMALLOC and run socket reconnect under PF_MEMALLOC as well as reset SOCK_MEMALLOC before engaging the protocol ->connect() method. PF_MEMALLOC should allow the allocation of struct socket and related objects and the early (re)setting of SOCK_MEMALLOC should allow us to receive the packets required for the TCP connection buildup. [jlayton@redhat.com: Restore PF_MEMALLOC task flags in all cases] [dfeng@redhat.com: Fix handling of multiple swap files] [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman Acked-by: Rik van Riel Cc: Christoph Hellwig Cc: David S. Miller Cc: Eric B Munson Cc: Eric Paris Cc: James Morris Cc: Mel Gorman Cc: Mike Christie Cc: Neil Brown Cc: Sebastian Andrzej Siewior Cc: Trond Myklebust Cc: Xiaotian Feng Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfs_fs.h | 4 ++-- include/linux/sunrpc/xprt.h | 3 +++ 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 4b6043c20f77..35994f975a7f 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -473,10 +473,10 @@ extern ssize_t nfs_direct_IO(int, struct kiocb *, const struct iovec *, loff_t, unsigned long); extern ssize_t nfs_file_direct_read(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, - loff_t pos); + loff_t pos, bool uio); extern ssize_t nfs_file_direct_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, - loff_t pos); + loff_t pos, bool uio); /* * linux/fs/nfs/dir.c diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 77d278defa70..cff40aa7db62 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -174,6 +174,8 @@ struct rpc_xprt { unsigned long state; /* transport state */ unsigned char shutdown : 1, /* being shut down */ resvport : 1; /* use a reserved port */ + unsigned int swapper; /* we're swapping over this + transport */ unsigned int bind_index; /* bind function index */ /* @@ -316,6 +318,7 @@ void xprt_release_rqst_cong(struct rpc_task *task); void xprt_disconnect_done(struct rpc_xprt *xprt); void xprt_force_disconnect(struct rpc_xprt *xprt); void xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie); +int xs_swapper(struct rpc_xprt *xprt, int enable); /* * Reserved bit positions in xprt->state -- cgit v1.2.3 From 0030f535a5cf9b1841d2088c10a0b2f8f2987460 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 31 Jul 2012 16:45:25 -0700 Subject: mm: memcg: fix compaction/migration failing due to memcg limits Compaction (and page migration in general) can currently be hindered through pages being owned by memory cgroups that are at their limits and unreclaimable. The reason is that the replacement page is being charged against the limit while the page being replaced is also still charged. But this seems unnecessary, given that only one of the two pages will still be in use after migration finishes. This patch changes the memcg migration sequence so that the replacement page is not charged. Whatever page is still in use after successful or failed migration gets to keep the charge of the page that was going to be replaced. The replacement page will still show up temporarily in the rss/cache statistics, this can be fixed in a later patch as it's less urgent. Reported-by: David Rientjes Signed-off-by: Johannes Weiner Acked-by: KAMEZAWA Hiroyuki Acked-by: Michal Hocko Cc: Hugh Dickins Cc: David Rientjes Cc: Wanpeng Li Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 5a3ee6423634..8d9489fdab2e 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -98,9 +98,9 @@ int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup) extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg); -extern int -mem_cgroup_prepare_migration(struct page *page, - struct page *newpage, struct mem_cgroup **memcgp, gfp_t gfp_mask); +extern void +mem_cgroup_prepare_migration(struct page *page, struct page *newpage, + struct mem_cgroup **memcgp); extern void mem_cgroup_end_migration(struct mem_cgroup *memcg, struct page *oldpage, struct page *newpage, bool migration_ok); @@ -276,11 +276,10 @@ static inline struct cgroup_subsys_state return NULL; } -static inline int +static inline void mem_cgroup_prepare_migration(struct page *page, struct page *newpage, - struct mem_cgroup **memcgp, gfp_t gfp_mask) + struct mem_cgroup **memcgp) { - return 0; } static inline void mem_cgroup_end_migration(struct mem_cgroup *memcg, -- cgit v1.2.3 From 6527af5d1bea219d64095a5e30c1b1e0868aae16 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 31 Jul 2012 16:46:16 -0700 Subject: mm: remove redundant initialization pg_data_t is zeroed before reaching free_area_init_core(), so remove the now unnecessary initializations. Signed-off-by: Minchan Kim Cc: Tejun Heo Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmstat.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 65efb92da996..ad2cfd53dadc 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -179,11 +179,6 @@ extern void zone_statistics(struct zone *, struct zone *, gfp_t gfp); #define add_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, __d) #define sub_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, -(__d)) -static inline void zap_zone_vm_stats(struct zone *zone) -{ - memset(zone->vm_stat, 0, sizeof(zone->vm_stat)); -} - extern void inc_zone_state(struct zone *, enum zone_stat_item); #ifdef CONFIG_SMP -- cgit v1.2.3 From d833352a4338dc31295ed832a30c9ccff5c7a183 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 31 Jul 2012 16:46:20 -0700 Subject: mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables If a process creates a large hugetlbfs mapping that is eligible for page table sharing and forks heavily with children some of whom fault and others which destroy the mapping then it is possible for page tables to get corrupted. Some teardowns of the mapping encounter a "bad pmd" and output a message to the kernel log. The final teardown will trigger a BUG_ON in mm/filemap.c. This was reproduced in 3.4 but is known to have existed for a long time and goes back at least as far as 2.6.37. It was probably was introduced in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages look like this; [ ..........] Lots of bad pmd messages followed by this [ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7). [ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7). [ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7). [ 127.186778] ------------[ cut here ]------------ [ 127.186781] kernel BUG at mm/filemap.c:134! [ 127.186782] invalid opcode: 0000 [#1] SMP [ 127.186783] CPU 7 [ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod [ 127.186801] [ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR [ 127.186804] RIP: 0010:[] [] __delete_from_page_cache+0x15e/0x160 [ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002 [ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0 [ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00 [ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003 [ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8 [ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8 [ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000 [ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0 [ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0) [ 127.186821] Stack: [ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b [ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98 [ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000 [ 127.186827] Call Trace: [ 127.186829] [] delete_from_page_cache+0x3b/0x80 [ 127.186832] [] truncate_hugepages+0x115/0x220 [ 127.186834] [] hugetlbfs_evict_inode+0x13/0x30 [ 127.186837] [] evict+0xa7/0x1b0 [ 127.186839] [] iput_final+0xd3/0x1f0 [ 127.186840] [] iput+0x39/0x50 [ 127.186842] [] d_kill+0xf8/0x130 [ 127.186843] [] dput+0xd2/0x1a0 [ 127.186845] [] __fput+0x170/0x230 [ 127.186848] [] ? rb_erase+0xce/0x150 [ 127.186849] [] fput+0x1d/0x30 [ 127.186851] [] remove_vma+0x37/0x80 [ 127.186853] [] do_munmap+0x2d2/0x360 [ 127.186855] [] sys_shmdt+0xc9/0x170 [ 127.186857] [] system_call_fastpath+0x16/0x1b [ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0 [ 127.186868] RIP [] __delete_from_page_cache+0x15e/0x160 [ 127.186870] RSP [ 127.186871] ---[ end trace 7cbac5d1db69f426 ]--- The bug is a race and not always easy to reproduce. To reproduce it I was doing the following on a single socket I7-based machine with 16G of RAM. $ hugeadm --pool-pages-max DEFAULT:13G $ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax $ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall $ for i in `seq 1 9000`; do ./hugetlbfs-test; done On my particular machine, it usually triggers within 10 minutes but enabling debug options can change the timing such that it never hits. Once the bug is triggered, the machine is in trouble and needs to be rebooted. The machine will respond but processes accessing proc like "ps aux" will hang due to the BUG_ON. shutdown will also hang and needs a hard reset or a sysrq-b. The basic problem is a race between page table sharing and teardown. For the most part page table sharing depends on i_mmap_mutex. In some cases, it is also taking the mm->page_table_lock for the PTE updates but with shared page tables, it is the i_mmap_mutex that is more important. Unfortunately it appears to be also insufficient. Consider the following situation Process A Process B --------- --------- hugetlb_fault shmdt LockWrite(mmap_sem) do_munmap unmap_region unmap_vmas unmap_single_vma unmap_hugepage_range Lock(i_mmap_mutex) Lock(mm->page_table_lock) huge_pmd_unshare/unmap tables <--- (1) Unlock(mm->page_table_lock) Unlock(i_mmap_mutex) huge_pte_alloc ... Lock(i_mmap_mutex) ... vma_prio_walk, find svma, spte ... Lock(mm->page_table_lock) ... share spte ... Unlock(mm->page_table_lock) ... Unlock(i_mmap_mutex) ... hugetlb_no_page <--- (2) free_pgtables unlink_file_vma hugetlb_free_pgd_range remove_vma_list In this scenario, it is possible for Process A to share page tables with Process B that is trying to tear them down. The i_mmap_mutex on its own does not prevent Process A walking Process B's page tables. At (1) above, the page tables are not shared yet so it unmaps the PMDs. Process A sets up page table sharing and at (2) faults a new entry. Process B then trips up on it in free_pgtables. This patch fixes the problem by adding a new function __unmap_hugepage_range_final that is only called when the VMA is about to be destroyed. This function clears VM_MAYSHARE during unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA ineligible for sharing and avoids the race. Superficially this looks like it would then be vunerable to truncate and madvise issues but hugetlbfs has its own truncate handlers so does not use unmap_mapping_range() and does not support madvise(DONTNEED). This should be treated as a -stable candidate if it is merged. Test program is as follows. The test case was mostly written by Michal Hocko with a few minor changes to reproduce this bug. ==== CUT HERE ==== static size_t huge_page_size = (2UL << 20); static size_t nr_huge_page_A = 512; static size_t nr_huge_page_B = 5632; unsigned int get_random(unsigned int max) { struct timeval tv; gettimeofday(&tv, NULL); srandom(tv.tv_usec); return random() % max; } static void play(void *addr, size_t size) { unsigned char *start = addr, *end = start + size, *a; start += get_random(size/2); /* we could itterate on huge pages but let's give it more time. */ for (a = start; a < end; a += 4096) *a = 0; } int main(int argc, char **argv) { key_t key = IPC_PRIVATE; size_t sizeA = nr_huge_page_A * huge_page_size; size_t sizeB = nr_huge_page_B * huge_page_size; int shmidA, shmidB; void *addrA = NULL, *addrB = NULL; int nr_children = 300, n = 0; if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) { perror("shmget:"); return 1; } if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) { perror("shmat"); return 1; } if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) { perror("shmget:"); return 1; } if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) { perror("shmat"); return 1; } fork_child: switch(fork()) { case 0: switch (n%3) { case 0: play(addrA, sizeA); break; case 1: play(addrB, sizeB); break; case 2: break; } break; case -1: perror("fork:"); break; default: if (++n < nr_children) goto fork_child; play(addrA, sizeA); break; } shmdt(addrA); shmdt(addrB); do { wait(NULL); } while (--n > 0); shmctl(shmidA, IPC_RMID, NULL); shmctl(shmidB, IPC_RMID, NULL); return 0; } [akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build] Signed-off-by: Hugh Dickins Reviewed-by: Michal Hocko Signed-off-by: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index f9db20bfa9fc..225164842ab6 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -48,6 +48,10 @@ int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, unsigned long *, int *, int, unsigned int flags); void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long, struct page *); +void __unmap_hugepage_range_final(struct mmu_gather *tlb, + struct vm_area_struct *vma, + unsigned long start, unsigned long end, + struct page *ref_page); void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma, unsigned long start, unsigned long end, struct page *ref_page); @@ -130,6 +134,13 @@ static inline void copy_huge_page(struct page *dst, struct page *src) #define hugetlb_change_protection(vma, address, end, newprot) +static inline void __unmap_hugepage_range_final(struct mmu_gather *tlb, + struct vm_area_struct *vma, unsigned long start, + unsigned long end, struct page *ref_page) +{ + BUG(); +} + static inline void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma, unsigned long start, unsigned long end, struct page *ref_page) -- cgit v1.2.3 From 392a325c4351339cfbf182bb5a1444df1cf65dbb Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 10 Jul 2012 19:31:51 -0700 Subject: Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver The OLPC EC driver has outgrown arch/x86/platform/. It's time to both share common code amongst different architectures, as well as move it out of arch/x86/. The XO-1.75 is ARM-based, and the EC driver shares a lot of code with the x86 code. Signed-off-by: Andres Salomon Acked-by: Paul Fox Reviewed-by: Thomas Gleixner --- include/linux/olpc-ec.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 include/linux/olpc-ec.h (limited to 'include/linux') diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h new file mode 100644 index 000000000000..6d4e426d9fdc --- /dev/null +++ b/include/linux/olpc-ec.h @@ -0,0 +1,29 @@ +#ifndef _LINUX_OLPC_EC_H +#define _LINUX_OLPC_EC_H + +/* XO-1 EC commands */ +#define EC_FIRMWARE_REV 0x08 +#define EC_WRITE_SCI_MASK 0x1b +#define EC_WAKE_UP_WLAN 0x24 +#define EC_WLAN_LEAVE_RESET 0x25 +#define EC_READ_EB_MODE 0x2a +#define EC_SET_SCI_INHIBIT 0x32 +#define EC_SET_SCI_INHIBIT_RELEASE 0x34 +#define EC_WLAN_ENTER_RESET 0x35 +#define EC_WRITE_EXT_SCI_MASK 0x38 +#define EC_SCI_QUERY 0x84 +#define EC_EXT_SCI_QUERY 0x85 + +#ifdef CONFIG_OLPC + +extern int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, + size_t outlen); + +#else + +static inline int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, + size_t outlen) { return -ENODEV; } + +#endif /* CONFIG_OLPC */ + +#endif /* _LINUX_OLPC_EC_H */ -- cgit v1.2.3 From 3d26c20bae9e97c98f7240184427d3a38515d406 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Wed, 11 Jul 2012 17:40:25 -0700 Subject: Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it This provides a new API allows different OLPC architectures to override the EC driver. x86 and ARM OLPC machines use completely different EC backends. The olpc_ec_cmd is synchronous, and waits for the workqueue to send the command to the EC. Multiple callers can run olpc_ec_cmd() at once, and they will by serialized and sleep while only one executes on the EC at a time. We don't provide an unregister function, as that doesn't make sense within the context of OLPC machines - there's only ever 1 EC, it's critical to functionality, and it certainly not hotpluggable. Signed-off-by: Andres Salomon Acked-by: Paul Fox Reviewed-by: Thomas Gleixner --- include/linux/olpc-ec.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h index 6d4e426d9fdc..231e96f5dfe2 100644 --- a/include/linux/olpc-ec.h +++ b/include/linux/olpc-ec.h @@ -14,8 +14,14 @@ #define EC_SCI_QUERY 0x84 #define EC_EXT_SCI_QUERY 0x85 +struct olpc_ec_driver { + int (*ec_cmd)(u8, u8 *, size_t, u8 *, size_t, void *); +}; + #ifdef CONFIG_OLPC +extern void olpc_ec_driver_register(struct olpc_ec_driver *drv, void *arg); + extern int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, size_t outlen); -- cgit v1.2.3 From ac2504151f5af27bbf0c0362b7da5951e05dfc43 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 13 Jul 2012 05:57:17 -0700 Subject: Platform: OLPC: turn EC driver into a platform_driver The 1.75-based OLPC EC driver already does this; let's do it for all EC drivers. This gives us nice suspend/resume hooks, amongst other things. We want to run the EC's suspend hooks later than other drivers (which may be setting wakeup masks or be running EC commands). We also want to run the EC's resume hooks earlier than other drivers (which may want to run EC commands). Signed-off-by: Andres Salomon Acked-by: Paul Fox Reviewed-by: Thomas Gleixner --- include/linux/olpc-ec.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h index 231e96f5dfe2..5bb6e760aa61 100644 --- a/include/linux/olpc-ec.h +++ b/include/linux/olpc-ec.h @@ -14,7 +14,13 @@ #define EC_SCI_QUERY 0x84 #define EC_EXT_SCI_QUERY 0x85 +struct platform_device; + struct olpc_ec_driver { + int (*probe)(struct platform_device *); + int (*suspend)(struct platform_device *); + int (*resume)(struct platform_device *); + int (*ec_cmd)(u8, u8 *, size_t, u8 *, size_t, void *); }; -- cgit v1.2.3 From 4f46f8ac80416b0e8fd3aba6a0d842205fb29140 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 30 Jul 2012 21:28:27 +0200 Subject: dmaengine: shdma: restore partial transfer calculation The recent shdma driver split has mistakenly removed support for partial DMA transfer size calculation on forced termination. This patch restores it. Signed-off-by: Guennadi Liakhovetski Acked-by: Vinod Koul Signed-off-by: Paul Mundt --- include/linux/shdma-base.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h index 93f9821554b6..a3728bf66f0e 100644 --- a/include/linux/shdma-base.h +++ b/include/linux/shdma-base.h @@ -50,6 +50,7 @@ struct shdma_desc { struct list_head node; struct dma_async_tx_descriptor async_tx; enum dma_transfer_direction direction; + size_t partial; dma_cookie_t cookie; int chunks; int mark; @@ -98,6 +99,7 @@ struct shdma_ops { void (*start_xfer)(struct shdma_chan *, struct shdma_desc *); struct shdma_desc *(*embedded_desc)(void *, int); bool (*chan_irq)(struct shdma_chan *, int); + size_t (*get_partial)(struct shdma_chan *, struct shdma_desc *); }; struct shdma_dev { -- cgit v1.2.3 From c83f6bf98dc1f1a194118b3830706cebbebda8c4 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Wed, 1 Aug 2012 12:24:18 +0200 Subject: block: add partition resize function to blkpg ioctl Add a new operation code (BLKPG_RESIZE_PARTITION) to the BLKPG ioctl that allows altering the size of an existing partition, even if it is currently in use. This patch converts hd_struct->nr_sects into sequence counter because One might extend a partition while IO is happening to it and update of nr_sects can be non-atomic on 32bit machines with 64bit sector_t. This can lead to issues like reading inconsistent size of a partition. Sequence counter have been used so that readers don't have to take bdev mutex lock as we call sector_in_part() very frequently. Now all the access to hd_struct->nr_sects should happen using sequence counter read/update helper functions part_nr_sects_read/part_nr_sects_write. There is one exception though, set_capacity()/get_capacity(). I think theoritically race should exist there too but this patch does not modify set_capacity()/get_capacity() due to sheer number of call sites and I am afraid that change might break something. I have left that as a TODO item. We can handle it later if need be. This patch does not introduce any new races as such w.r.t set_capacity()/get_capacity(). v2: Add CONFIG_LBDAF test to UP preempt case as suggested by Phillip. Signed-off-by: Vivek Goyal Signed-off-by: Phillip Susi Signed-off-by: Jens Axboe --- include/linux/blkpg.h | 1 + include/linux/genhd.h | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkpg.h b/include/linux/blkpg.h index faf8a45af210..a8519446c111 100644 --- a/include/linux/blkpg.h +++ b/include/linux/blkpg.h @@ -40,6 +40,7 @@ struct blkpg_ioctl_arg { /* The subfunctions (for the op field) */ #define BLKPG_ADD_PARTITION 1 #define BLKPG_DEL_PARTITION 2 +#define BLKPG_RESIZE_PARTITION 3 /* Sizes of name fields. Unused at present. */ #define BLKPG_DEVNAMELTH 64 diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 017a7fb5a1fc..b88723b81b3d 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -98,7 +98,13 @@ struct partition_meta_info { struct hd_struct { sector_t start_sect; + /* + * nr_sects is protected by sequence counter. One might extend a + * partition while IO is happening to it and update of nr_sects + * can be non-atomic on 32bit machines with 64bit sector_t. + */ sector_t nr_sects; + seqcount_t nr_sects_seq; sector_t alignment_offset; unsigned int discard_alignment; struct device __dev; @@ -648,6 +654,57 @@ static inline void hd_struct_put(struct hd_struct *part) __delete_partition(part); } +/* + * Any access of part->nr_sects which is not protected by partition + * bd_mutex or gendisk bdev bd_mutex, should be done using this + * accessor function. + * + * Code written along the lines of i_size_read() and i_size_write(). + * CONFIG_PREEMPT case optimizes the case of UP kernel with preemption + * on. + */ +static inline sector_t part_nr_sects_read(struct hd_struct *part) +{ +#if BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_SMP) + sector_t nr_sects; + unsigned seq; + do { + seq = read_seqcount_begin(&part->nr_sects_seq); + nr_sects = part->nr_sects; + } while (read_seqcount_retry(&part->nr_sects_seq, seq)); + return nr_sects; +#elif BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_PREEMPT) + sector_t nr_sects; + + preempt_disable(); + nr_sects = part->nr_sects; + preempt_enable(); + return nr_sects; +#else + return part->nr_sects; +#endif +} + +/* + * Should be called with mutex lock held (typically bd_mutex) of partition + * to provide mutual exlusion among writers otherwise seqcount might be + * left in wrong state leaving the readers spinning infinitely. + */ +static inline void part_nr_sects_write(struct hd_struct *part, sector_t size) +{ +#if BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_SMP) + write_seqcount_begin(&part->nr_sects_seq); + part->nr_sects = size; + write_seqcount_end(&part->nr_sects_seq); +#elif BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_PREEMPT) + preempt_disable(); + part->nr_sects = size; + preempt_enable(); +#else + part->nr_sects = size; +#endif +} + #else /* CONFIG_BLOCK */ static inline void printk_all_partitions(void) { } -- cgit v1.2.3 From 068535f1fef4c90aee23eb7b9b9a71c5b72d7cd0 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Wed, 1 Aug 2012 07:56:16 -0400 Subject: locks: remove unused lm_release_private In commit 3b6e2723f32d ("locks: prevent side-effects of locks_release_private before file_lock is initialized") we removed the last user of lm_release_private without removing the field itself. Signed-off-by: J. Bruce Fields Signed-off-by: Linus Torvalds --- include/linux/fs.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index d7eed5b98ae2..4ba5c8715523 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1162,7 +1162,6 @@ struct lock_manager_operations { int (*lm_compare_owner)(struct file_lock *, struct file_lock *); void (*lm_notify)(struct file_lock *); /* unblock callback */ int (*lm_grant)(struct file_lock *, struct file_lock *, int); - void (*lm_release_private)(struct file_lock *); void (*lm_break)(struct file_lock *); int (*lm_change)(struct file_lock **, int); }; -- cgit v1.2.3