From a9fd053b56c6bb14972ab7a19da0b575fe4c5d66 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 19 Nov 2015 10:15:17 +0100 Subject: iio: st_sensors: support active-low interrupts Most ST MEMS Sensors that support interrupts can also handle sending an active low interrupt, i.e. going from high to low on data ready (or other interrupt) and thus triggering on a falling edge to the interrupt controller. Set up logic to inspect the interrupt line we get for a sensor: if it is triggering on rising edge, leave everything alone, but if it triggers on falling edges, set up active low, and if unsupported configurations appear: warn with errors and reconfigure the interrupt to a rising edge, which all interrupt generating sensors support. Create a local header for st_sensors_core.h to share functions between the sensor core and the trigger setup code. Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 2fe939c73cd2..6670c3d25c58 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -119,6 +119,8 @@ struct st_sensor_bdu { * @addr: address of the register. * @mask_int1: mask to enable/disable IRQ on INT1 pin. * @mask_int2: mask to enable/disable IRQ on INT2 pin. + * @addr_ihl: address to enable/disable active low on the INT lines. + * @mask_ihl: mask to enable/disable active low on the INT lines. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. @@ -127,6 +129,8 @@ struct st_sensor_data_ready_irq { u8 addr; u8 mask_int1; u8 mask_int2; + u8 addr_ihl; + u8 mask_ihl; struct { u8 en_addr; u8 en_mask; -- cgit v1.2.3 From 131497acd88a4456d99247cee457baefd2817835 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Sat, 16 Jan 2016 14:24:07 +0100 Subject: iio: add ad5761 DAC driver ad5761 is a 1-channel DAC with configurable output range. The driver uses the regulator interface for its voltage ref. It shares its register layout with ad5761r, ad5721 and ad5721r. Differences: ad5761* are 16 bit, ad5721* are 12 bits. ad57*1r have an internal reference. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Jonathan Cameron --- include/linux/platform_data/ad5761.h | 44 ++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 include/linux/platform_data/ad5761.h (limited to 'include/linux') diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h new file mode 100644 index 000000000000..7bd8ed7d978e --- /dev/null +++ b/include/linux/platform_data/ad5761.h @@ -0,0 +1,44 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5761_H__ +#define __LINUX_PLATFORM_DATA_AD5761_H__ + +/** + * enum ad5761_voltage_range - Voltage range the AD5761 is configured for. + * @AD5761_VOLTAGE_RANGE_M10V_10V: -10V to 10V + * @AD5761_VOLTAGE_RANGE_0V_10V: 0V to 10V + * @AD5761_VOLTAGE_RANGE_M5V_5V: -5V to 5V + * @AD5761_VOLTAGE_RANGE_0V_5V: 0V to 5V + * @AD5761_VOLTAGE_RANGE_M2V5_7V5: -2.5V to 7.5V + * @AD5761_VOLTAGE_RANGE_M3V_3V: -3V to 3V + * @AD5761_VOLTAGE_RANGE_0V_16V: 0V to 16V + * @AD5761_VOLTAGE_RANGE_0V_20V: 0V to 20V + */ + +enum ad5761_voltage_range { + AD5761_VOLTAGE_RANGE_M10V_10V, + AD5761_VOLTAGE_RANGE_0V_10V, + AD5761_VOLTAGE_RANGE_M5V_5V, + AD5761_VOLTAGE_RANGE_0V_5V, + AD5761_VOLTAGE_RANGE_M2V5_7V5, + AD5761_VOLTAGE_RANGE_M3V_3V, + AD5761_VOLTAGE_RANGE_0V_16V, + AD5761_VOLTAGE_RANGE_0V_20V, +}; + +/** + * struct ad5761_platform_data - AD5761 DAC driver platform data + * @voltage_range: Voltage range the AD5761 is configured for + */ + +struct ad5761_platform_data { + enum ad5761_voltage_range voltage_range; +}; + +#endif -- cgit v1.2.3