From e39e5b5e7206767a0f1be0e5cb7acbd0db87ae60 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 30 Sep 2012 19:29:39 +0300 Subject: cfg80211: Allow user space to specify non-IEs to SAE Authentication SAE extends Authentication frames with fields that are not information elements. NL80211_ATTR_IE is not suitable for these, so introduce a new attribute that can be used to specify the fields needed for SAE in station mode. Signed-off-by: Jouni Malinen [change to verify that SAE is only used with authenticate command] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1b4989082244..60cebfac3e3c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1152,6 +1152,9 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication * @key: WEP key for shared key authentication + * @sae_data: Non-IE data to use with SAE or %NULL. This starts with + * Authentication transaction sequence number field. + * @sae_data_len: Length of sae_data buffer in octets */ struct cfg80211_auth_request { struct cfg80211_bss *bss; @@ -1160,6 +1163,8 @@ struct cfg80211_auth_request { enum nl80211_auth_type auth_type; const u8 *key; u8 key_len, key_idx; + const u8 *sae_data; + size_t sae_data_len; }; /** -- cgit v1.2.3 From f461be3eff662f01a177ecea8c1d7b040bb6bfbe Mon Sep 17 00:00:00 2001 From: Mahesh Palivela Date: Thu, 11 Oct 2012 08:04:52 +0000 Subject: {nl,cfg}80211: Peer STA VHT caps To save STAs VHT caps in AP mode Signed-off-by: Mahesh Palivela Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 60cebfac3e3c..607b5c02f740 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -498,6 +498,7 @@ enum station_parameters_apply_mask { * @plink_action: plink action to take * @plink_state: set the peer link state for a station * @ht_capa: HT capabilities of station + * @vht_capa: VHT capabilities of station * @uapsd_queues: bitmap of queues configured for uapsd. same format * as the AC bitmap in the QoS info field * @max_sp: max Service Period. same format as the MAX_SP in the @@ -517,6 +518,7 @@ struct station_parameters { u8 plink_action; u8 plink_state; struct ieee80211_ht_cap *ht_capa; + struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; }; -- cgit v1.2.3 From ed47377154310fd2fd59d75fcdeb3d022344fb31 Mon Sep 17 00:00:00 2001 From: Sam Leffler Date: Thu, 11 Oct 2012 21:03:31 -0700 Subject: {nl,cfg}80211: add a flags word to scan requests Add a flags word to direct and scheduled scan requests; it will be used for control of optional behaviours such as flushing the bss cache prior to doing a scan. Signed-off-by: Sam Leffler Tested-by: Amitkumar Karwar Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 607b5c02f740..d95da8f55f6e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1002,6 +1002,7 @@ struct cfg80211_ssid { * @n_channels: total number of channels to scan * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for * @wdev: the wireless device to scan for @@ -1014,6 +1015,7 @@ struct cfg80211_scan_request { u32 n_channels; const u8 *ie; size_t ie_len; + u32 flags; u32 rates[IEEE80211_NUM_BANDS]; @@ -1046,6 +1048,7 @@ struct cfg80211_match_set { * @interval: interval between each scheduled scan cycle * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @flags: bit field of flags controlling operation * @match_sets: sets of parameters to be matched for a scan result * entry to be considered valid and to be passed to the host * (others are filtered out). @@ -1063,6 +1066,7 @@ struct cfg80211_sched_scan_request { u32 interval; const u8 *ie; size_t ie_len; + u32 flags; struct cfg80211_match_set *match_sets; int n_match_sets; s32 rssi_thold; -- cgit v1.2.3 From 15d6030b4bec618742b8b9ccae9209c8f9e4a916 Mon Sep 17 00:00:00 2001 From: Sam Leffler Date: Thu, 11 Oct 2012 21:03:34 -0700 Subject: cfg80211: add support for flushing old scan results Add an NL80211_SCAN_FLAG_FLUSH flag that causes old bss cache entries to be flushed on scan completion. This is useful for collecting guaranteed fresh scan/survey result (e.g. on resume). For normal scan, flushing only happens on successful completion of a scan; i.e. it does not happen if the scan is aborted. For scheduled scan, previous scan results are flushed everytime when we get new scan results. This feature is enabled by default. Drivers can disable it by unsetting the NL80211_FEATURE_SCAN_FLUSH flag. Signed-off-by: Sam Leffler Tested-by: Amitkumar Karwar Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao [invert polarity of feature flag to account for old kernels] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d95da8f55f6e..aa0e4a12308c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1005,6 +1005,7 @@ struct cfg80211_ssid { * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for + * @scan_start: time (in jiffies) when the scan started * @wdev: the wireless device to scan for * @aborted: (internal) scan request was notified as aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band @@ -1023,6 +1024,7 @@ struct cfg80211_scan_request { /* internal */ struct wiphy *wiphy; + unsigned long scan_start; bool aborted; bool no_cck; @@ -1074,6 +1076,7 @@ struct cfg80211_sched_scan_request { /* internal */ struct wiphy *wiphy; struct net_device *dev; + unsigned long scan_start; /* keep last */ struct ieee80211_channel *channels[0]; -- cgit v1.2.3 From c8442118ad9cd05cfe3b993f058e70ab25b1009a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Oct 2012 10:17:18 +0200 Subject: cfg80211: allow per interface TX power setting The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c6964572890f..8034a4268fcb 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1551,7 +1551,10 @@ struct cfg80211_gtk_rekey_data { * struct wiphy. If returning an error, no value should be changed. * * @set_tx_power: set the transmit power according to the parameters, - * the power passed is in mBm, to get dBm use MBM_TO_DBM(). + * the power passed is in mBm, to get dBm use MBM_TO_DBM(). The + * wdev may be %NULL if power was set for the wiphy, and will + * always be %NULL unless the driver supports per-vif TX power + * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful * @@ -1748,9 +1751,10 @@ struct cfg80211_ops { int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); - int (*set_tx_power)(struct wiphy *wiphy, + int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_tx_power_setting type, int mbm); - int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, + int *dbm); int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); -- cgit v1.2.3 From f4e583c8935c6f52f9385ee7cfbea8f65c66a737 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 2 Nov 2012 13:27:48 +0100 Subject: nl/cfg80211: add the NL80211_CMD_SET_MCAST_RATE command This command triggers a new callback: set_mcast_rate(). It enables the user to change the rate used to send multicast frames for vif configured as IBSS or MESH_POINT Signed-off-by: Antonio Quartulli Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8034a4268fcb..cee791fd4cff 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1545,6 +1545,9 @@ struct cfg80211_gtk_rekey_data { * to a merge. * @leave_ibss: Leave the IBSS. * + * @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or + * MESH mode) + * * @set_wiphy_params: Notify that wiphy parameters have changed; * @changed bitfield (see &enum wiphy_params_flags) describes which values * have changed. The actual parameter values are available in @@ -1749,6 +1752,9 @@ struct cfg80211_ops { struct cfg80211_ibss_params *params); int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); + int (*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev, + int rate[IEEE80211_NUM_BANDS]); + int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, -- cgit v1.2.3 From 37c73b5f323c973c1db6857494a6685260440be1 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Fri, 26 Oct 2012 14:49:25 -0700 Subject: cfg80211: allow registering more than one beacon listener The commit: commit 5e760230e42cf759bd923457ca2753aacf2e656e Author: Johannes Berg Date: Fri Nov 4 11:18:17 2011 +0100 cfg80211: allow registering to beacons allowed only a single process to register for beacon events per wiphy. This breaks cases where a user may want two or more VIFs on a wiphy and run a seperate hostapd process on each vif. This patch allows multiple beacon listeners, fixing the regression. Signed-off-by: Ben Greear Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index cee791fd4cff..10c9fc68d1af 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3560,7 +3560,6 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, * @len: length of the frame * @freq: frequency the frame was received on * @sig_dbm: signal strength in mBm, or 0 if unknown - * @gfp: allocation flags * * Use this function to report to userspace when a beacon was * received. It is not useful to call this when there is no @@ -3568,7 +3567,7 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, */ void cfg80211_report_obss_beacon(struct wiphy *wiphy, const u8 *frame, size_t len, - int freq, int sig_dbm, gfp_t gfp); + int freq, int sig_dbm); /** * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used -- cgit v1.2.3 From 0ee453552f0b1ea87f6f50a077b0ed9d9ac7d6ac Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Oct 2012 19:48:40 +0100 Subject: wireless: add utility function to get P2P attribute Parsing the P2P attributes can be tricky as their contents can be split across multiple (vendor) IEs. Thus, it's not possible to parse them like IEs (by returning a pointer to the data.) Instead, provide a function that copies the attribute data into a caller-provided buffer and returns the size needed (useful in case the buffer was too small.) Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 10c9fc68d1af..81d725038f97 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3617,6 +3617,25 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate); */ void cfg80211_unregister_wdev(struct wireless_dev *wdev); +/** + * cfg80211_get_p2p_attr - find and copy a P2P attribute from IE buffer + * @ies: the input IE buffer + * @len: the input length + * @attr: the attribute ID to find + * @buf: output buffer, can be %NULL if the data isn't needed, e.g. + * if the function is only called to get the needed buffer size + * @bufsize: size of the output buffer + * + * The function finds a given P2P attribute in the (vendor) IEs and + * copies its contents to the given buffer. + * + * The return value is a negative error code (-%EILSEQ or -%ENOENT) if + * the data is malformed or the attribute can't be found (respectively), + * or the length of the found attribute (which can be zero). + */ +unsigned int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, + u8 attr, u8 *buf, unsigned int bufsize); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ -- cgit v1.2.3 From 3475b0946bd2057497628790d4b4fce4bfdcc304 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Fri, 16 Nov 2012 22:49:57 +0200 Subject: cfg80211: Add TDLS event to allow drivers to request operations The NL80211_CMD_TDLS_OPER command was previously used only for userspace request for the kernel code to perform TDLS operations. However, there are also cases where the driver may need to request operations from userspace, e.g., when using security on the AP path. Add a new cfg80211 function for generating a TDLS operation event for drivers to request a new link to be set up (NL80211_TDLS_SETUP) or an existing link to be torn down (NL80211_TDLS_TEARDOWN). Drivers can optionally use these events, e.g., based on noticing data traffic being sent to a peer station that is seen with good signal strength. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 81d725038f97..8a1aec54e68f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3593,6 +3593,25 @@ bool cfg80211_can_beacon_sec_chan(struct wiphy *wiphy, void cfg80211_ch_switch_notify(struct net_device *dev, int freq, enum nl80211_channel_type type); +/* + * cfg80211_tdls_oper_request - request userspace to perform TDLS operation + * @dev: the device on which the operation is requested + * @peer: the MAC address of the peer device + * @oper: the requested TDLS operation (NL80211_TDLS_SETUP or + * NL80211_TDLS_TEARDOWN) + * @reason_code: the reason code for teardown request + * @gfp: allocation flags + * + * This function is used to request userspace to perform TDLS operation that + * requires knowledge of keys, i.e., link setup or teardown when the AP + * connection uses encryption. This is optional mechanism for the driver to use + * if it can automatically determine when a TDLS link could be useful (e.g., + * based on traffic and signal strength for a peer). + */ +void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer, + enum nl80211_tdls_operation oper, + u16 reason_code, gfp_t gfp); + /* * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units) * @rate: given rate_info to calculate bitrate from -- cgit v1.2.3 From c216e6417f473ab4666f539844652bf2f4129777 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sun, 25 Nov 2012 19:13:28 +0100 Subject: cfg80211: change function signature of cfg80211_get_p2p_attr() The function cfg80211_get_p2p_attr() can fail and returns a negative error code. However, the return type is unsigned int. The largest positive number is determined by desired_len variable in the function, which is u16. So changing the return type to int to allow easy error checking. Also change the type for the attribute to enum for improved type checking. Signed-off-by: Arend van Spriel [fix indentation, don't use u8 attr variable] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8a1aec54e68f..c2c185febb87 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3652,8 +3652,9 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev); * the data is malformed or the attribute can't be found (respectively), * or the length of the found attribute (which can be zero). */ -unsigned int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, - u8 attr, u8 *buf, unsigned int bufsize); +int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, + enum ieee80211_p2p_attr_id attr, + u8 *buf, unsigned int bufsize); /* Logging, debugging and troubleshooting/diagnostic helpers. */ -- cgit v1.2.3 From 42d97a599eb6b2aab3a401b3e5799a399d6c7652 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 8 Nov 2012 18:31:02 +0100 Subject: cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c2c185febb87..1effe0682d28 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1791,7 +1791,6 @@ struct cfg80211_ops { int (*remain_on_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type, unsigned int duration, u64 *cookie); int (*cancel_remain_on_channel)(struct wiphy *wiphy, @@ -1800,10 +1799,8 @@ struct cfg80211_ops { int (*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, bool offchan, - enum nl80211_channel_type channel_type, - bool channel_type_valid, unsigned int wait, - const u8 *buf, size_t len, bool no_cck, - bool dont_wait_for_ack, u64 *cookie); + unsigned int wait, const u8 *buf, size_t len, + bool no_cck, bool dont_wait_for_ack, u64 *cookie); int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, struct wireless_dev *wdev, u64 cookie); @@ -3350,14 +3347,12 @@ void cfg80211_disconnected(struct net_device *dev, u16 reason, * @wdev: wireless device * @cookie: the request cookie * @chan: The current channel (from remain_on_channel request) - * @channel_type: Channel type * @duration: Duration in milliseconds that the driver intents to remain on the * channel * @gfp: allocation flags */ void cfg80211_ready_on_channel(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type, unsigned int duration, gfp_t gfp); /** @@ -3365,12 +3360,10 @@ void cfg80211_ready_on_channel(struct wireless_dev *wdev, u64 cookie, * @wdev: wireless device * @cookie: the request cookie * @chan: The current channel (from remain_on_channel request) - * @channel_type: Channel type * @gfp: allocation flags */ void cfg80211_remain_on_channel_expired(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type, gfp_t gfp); -- cgit v1.2.3 From 683b6d3b31a51956ea540df00abb0b78894924c1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 8 Nov 2012 21:25:48 +0100 Subject: cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 65 +++++++++++++++++++++++++++----------------------- 1 file changed, 35 insertions(+), 30 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1effe0682d28..86f777af79e8 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -305,6 +305,23 @@ struct key_params { u32 cipher; }; +/** + * struct cfg80211_chan_def - channel definition + * @chan: the (control) channel + * @_type: the channel type, don't use this field, + * use cfg80211_get_chandef_type() if needed. + */ +struct cfg80211_chan_def { + struct ieee80211_channel *chan; + enum nl80211_channel_type _type; +}; + +static inline enum nl80211_channel_type +cfg80211_get_chandef_type(const struct cfg80211_chan_def *chandef) +{ + return chandef->_type; +} + /** * enum survey_info_flags - survey information flags * @@ -426,8 +443,7 @@ struct cfg80211_beacon_data { * * Used to configure an AP interface. * - * @channel: the channel to start the AP on - * @channel_type: the channel type to use + * @chandef: defines the channel to use * @beacon: beacon data * @beacon_interval: beacon interval * @dtim_period: DTIM period @@ -441,8 +457,7 @@ struct cfg80211_beacon_data { * @inactivity_timeout: time in seconds to determine station's inactivity. */ struct cfg80211_ap_settings { - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; struct cfg80211_beacon_data beacon; @@ -909,8 +924,7 @@ struct mesh_config { /** * struct mesh_setup - 802.11s mesh setup configuration - * @channel: the channel to start the mesh network on - * @channel_type: the channel type to use + * @chandef: defines the channel to use * @mesh_id: the mesh ID * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes * @sync_method: which synchronization method to use @@ -925,8 +939,7 @@ struct mesh_config { * These parameters are fixed when the mesh is created. */ struct mesh_setup { - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; const u8 *mesh_id; u8 mesh_id_len; u8 sync_method; @@ -1266,8 +1279,7 @@ struct cfg80211_disassoc_request { * @ssid_len: The length of the SSID, will always be non-zero. * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not * search for IBSSs with a different BSSID. - * @channel: The channel to use if no IBSS can be found to join. - * @channel_type: channel type (HT mode) + * @chandef: defines the channel to use if no other IBSS to join can be found * @channel_fixed: The channel should be fixed -- do not search for * IBSSs to join on other channels. * @ie: information element(s) to include in the beacon @@ -1285,8 +1297,7 @@ struct cfg80211_disassoc_request { struct cfg80211_ibss_params { u8 *ssid; u8 *bssid; - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; u8 *ie; u8 ssid_len, ie_len; u16 beacon_interval; @@ -1728,8 +1739,7 @@ struct cfg80211_ops { struct ieee80211_channel *chan); int (*set_monitor_channel)(struct wiphy *wiphy, - struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type); + struct cfg80211_chan_def *chandef); int (*scan)(struct wiphy *wiphy, struct cfg80211_scan_request *request); @@ -1855,10 +1865,9 @@ struct cfg80211_ops { void (*get_et_strings)(struct wiphy *wiphy, struct net_device *dev, u32 sset, u8 *data); - struct ieee80211_channel * - (*get_channel)(struct wiphy *wiphy, + int (*get_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, - enum nl80211_channel_type *type); + struct cfg80211_chan_def *chandef); int (*start_p2p_device)(struct wiphy *wiphy, struct wireless_dev *wdev); @@ -2466,8 +2475,7 @@ struct wireless_dev { spinlock_t event_lock; struct cfg80211_internal_bss *current_bss; /* associated / joined */ - struct ieee80211_channel *preset_chan; - enum nl80211_channel_type preset_chantype; + struct cfg80211_chan_def preset_chandef; /* for AP and mesh channel tracking */ struct ieee80211_channel *channel; @@ -3563,28 +3571,25 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, int freq, int sig_dbm); /** - * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used + * cfg80211_reg_can_beacon - check if beaconing is allowed * @wiphy: the wiphy - * @chan: main channel - * @channel_type: HT mode + * @chandef: the channel definition * * This function returns true if there is no secondary channel or the secondary - * channel can be used for beaconing (i.e. is not a radar channel etc.) + * channel(s) can be used for beaconing (i.e. is not a radar channel etc.) */ -bool cfg80211_can_beacon_sec_chan(struct wiphy *wiphy, - struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type); +bool cfg80211_reg_can_beacon(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef); /* * cfg80211_ch_switch_notify - update wdev channel and notify userspace * @dev: the device which switched channels - * @freq: new channel frequency (in MHz) - * @type: channel type + * @chandef: the new channel definition * * Acquires wdev_lock, so must only be called from sleepable driver context! */ -void cfg80211_ch_switch_notify(struct net_device *dev, int freq, - enum nl80211_channel_type type); +void cfg80211_ch_switch_notify(struct net_device *dev, + struct cfg80211_chan_def *chandef); /* * cfg80211_tdls_oper_request - request userspace to perform TDLS operation -- cgit v1.2.3 From 3d9d1d6656a73ea8407734cfb00b81d14ef62d4b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 8 Nov 2012 23:14:50 +0100 Subject: nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 73 +++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 69 insertions(+), 4 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 86f777af79e8..977da58fb7ea 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -308,20 +308,85 @@ struct key_params { /** * struct cfg80211_chan_def - channel definition * @chan: the (control) channel - * @_type: the channel type, don't use this field, - * use cfg80211_get_chandef_type() if needed. + * @width: channel width + * @center_freq1: center frequency of first segment + * @center_freq2: center frequency of second segment + * (only with 80+80 MHz) */ struct cfg80211_chan_def { struct ieee80211_channel *chan; - enum nl80211_channel_type _type; + enum nl80211_chan_width width; + u32 center_freq1; + u32 center_freq2; }; +/** + * cfg80211_get_chandef_type - return old channel type from chandef + * @chandef: the channel definition + * + * Returns the old channel type (NOHT, HT20, HT40+/-) from a given + * chandef, which must have a bandwidth allowing this conversion. + */ static inline enum nl80211_channel_type cfg80211_get_chandef_type(const struct cfg80211_chan_def *chandef) { - return chandef->_type; + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20_NOHT: + return NL80211_CHAN_NO_HT; + case NL80211_CHAN_WIDTH_20: + return NL80211_CHAN_HT20; + case NL80211_CHAN_WIDTH_40: + if (chandef->center_freq1 > chandef->chan->center_freq) + return NL80211_CHAN_HT40PLUS; + return NL80211_CHAN_HT40MINUS; + default: + WARN_ON(1); + return NL80211_CHAN_NO_HT; + } +} + +/** + * cfg80211_chandef_create - create channel definition using channel type + * @chandef: the channel definition struct to fill + * @channel: the control channel + * @chantype: the channel type + * + * Given a channel type, create a channel definition. + */ +void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, + struct ieee80211_channel *channel, + enum nl80211_channel_type chantype); + +/** + * cfg80211_chandef_identical - check if two channel definitions are identical + * @chandef1: first channel definition + * @chandef2: second channel definition + * + * Returns %true if the channels defined by the channel definitions are + * identical, %false otherwise. + */ +static inline bool +cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, + const struct cfg80211_chan_def *chandef2) +{ + return (chandef1->chan == chandef2->chan && + chandef1->width == chandef2->width && + chandef1->center_freq1 == chandef2->center_freq1 && + chandef1->center_freq2 == chandef2->center_freq2); } +/** + * cfg80211_chandef_compatible - check if two channel definitions are compatible + * @chandef1: first channel definition + * @chandef2: second channel definition + * + * Returns %NULL if the given channel definitions are incompatible, + * chandef1 or chandef2 otherwise. + */ +const struct cfg80211_chan_def * +cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, + const struct cfg80211_chan_def *chandef2); + /** * enum survey_info_flags - survey information flags * -- cgit v1.2.3 From db9c64cf8d9d3fcbc34b09d037f266d1fc9f928c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 9 Nov 2012 14:56:41 +0100 Subject: nl80211/cfg80211: add VHT MCS support Add support for reporting and calculating VHT MCSes. Note that I'm not completely sure that the bitrate calculations are correct, nor that they can't be simplified. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 977da58fb7ea..e78db2cf3d1b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -662,16 +662,24 @@ enum station_info_flags { * Used by the driver to indicate the specific rate transmission * type for 802.11n transmissions. * - * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled - * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission + * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS + * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS + * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission + * @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission + * @RATE_INFO_FLAGS_80P80_MHZ_WIDTH: 80+80 MHz width transmission + * @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval - * @RATE_INFO_FLAGS_60G: 60gHz MCS + * @RATE_INFO_FLAGS_60G: 60GHz MCS */ enum rate_info_flags { - RATE_INFO_FLAGS_MCS = 1<<0, - RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1, - RATE_INFO_FLAGS_SHORT_GI = 1<<2, - RATE_INFO_FLAGS_60G = 1<<3, + RATE_INFO_FLAGS_MCS = BIT(0), + RATE_INFO_FLAGS_VHT_MCS = BIT(1), + RATE_INFO_FLAGS_40_MHZ_WIDTH = BIT(2), + RATE_INFO_FLAGS_80_MHZ_WIDTH = BIT(3), + RATE_INFO_FLAGS_80P80_MHZ_WIDTH = BIT(4), + RATE_INFO_FLAGS_160_MHZ_WIDTH = BIT(5), + RATE_INFO_FLAGS_SHORT_GI = BIT(6), + RATE_INFO_FLAGS_60G = BIT(7), }; /** @@ -682,11 +690,13 @@ enum rate_info_flags { * @flags: bitflag of flags from &enum rate_info_flags * @mcs: mcs index if struct describes a 802.11n bitrate * @legacy: bitrate in 100kbit/s for 802.11abg + * @nss: number of streams (VHT only) */ struct rate_info { u8 flags; u8 mcs; u16 legacy; + u8 nss; }; /** -- cgit v1.2.3 From 9f5e8f6efc7c2601136b27d9c7325c245f8fd19a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 22 Nov 2012 16:59:45 +0100 Subject: cfg80211: rework chandef checking and export it Some of the chandef checking that we do in cfg80211 to check if a channel is supported or not is also needed in mac80211, so rework that a bit and export the functions that are needed. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e78db2cf3d1b..a238f41e55c2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -58,6 +58,8 @@ * structures here describe these capabilities in detail. */ +struct wiphy; + /* * wireless hardware capability structures */ @@ -387,6 +389,22 @@ const struct cfg80211_chan_def * cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, const struct cfg80211_chan_def *chandef2); +/** + * cfg80211_chandef_valid - check if a channel definition is valid + * @chandef: the channel definition to check + */ +bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); + +/** + * cfg80211_chandef_usable - check if secondary channels can be used + * @wiphy: the wiphy to validate against + * @chandef: the channel definition to check + * @prohibited_flags: the regulatory chanenl flags that must not be set + */ +bool cfg80211_chandef_usable(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef, + u32 prohibited_flags); + /** * enum survey_info_flags - survey information flags * @@ -1045,9 +1063,6 @@ struct ieee80211_txq_params { u8 aifs; }; -/* from net/wireless.h */ -struct wiphy; - /** * DOC: Scanning and BSS list handling * -- cgit v1.2.3 From 53cabad70ecf0c245b41285de64a74a6c3ee9933 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 14 Nov 2012 15:17:28 +0100 Subject: nl80211: support P2P GO powersave configuration If a driver supports P2P GO powersave, allow it to set the new feature flags for it and allow userspace to configure the parameters for it. This can be done at GO startup and later changed with SET_BSS. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a238f41e55c2..731b48fa238b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -538,6 +538,8 @@ struct cfg80211_beacon_data { * @privacy: the BSS uses privacy * @auth_type: Authentication type (algorithm) * @inactivity_timeout: time in seconds to determine station's inactivity. + * @p2p_ctwindow: P2P CT Window + * @p2p_opp_ps: P2P opportunistic PS */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -552,6 +554,8 @@ struct cfg80211_ap_settings { bool privacy; enum nl80211_auth_type auth_type; int inactivity_timeout; + u8 p2p_ctwindow; + bool p2p_opp_ps; }; /** @@ -913,6 +917,8 @@ struct mpath_info { * @ap_isolate: do not forward packets between connected stations * @ht_opmode: HT Operation mode * (u16 = opmode, -1 = do not change) + * @p2p_ctwindow: P2P CT Window (-1 = no change) + * @p2p_opp_ps: P2P opportunistic PS (-1 = no change) */ struct bss_parameters { int use_cts_prot; @@ -922,6 +928,7 @@ struct bss_parameters { u8 basic_rates_len; int ap_isolate; int ht_opmode; + s8 p2p_ctwindow, p2p_opp_ps; }; /** -- cgit v1.2.3 From 9caf03640279e64d0ba36539b42daa1b43a49486 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Nov 2012 01:25:20 +0100 Subject: cfg80211: fix BSS struct IE access races When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 41 +++++++++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 14 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 731b48fa238b..8e6a6b73b9c9 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1205,6 +1205,18 @@ enum cfg80211_signal_type { CFG80211_SIGNAL_TYPE_UNSPEC, }; +/** + * struct cfg80211_bss_ie_data - BSS entry IE data + * @rcu_head: internal use, for freeing + * @len: length of the IEs + * @data: IE data + */ +struct cfg80211_bss_ies { + struct rcu_head rcu_head; + int len; + u8 data[]; +}; + /** * struct cfg80211_bss - BSS description * @@ -1216,36 +1228,34 @@ enum cfg80211_signal_type { * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order - * @information_elements: the information elements (Note that there + * @ies: the information elements (Note that there * is no guarantee that these are well-formed!); this is a pointer to * either the beacon_ies or proberesp_ies depending on whether Probe * Response frame has been received - * @len_information_elements: total length of the information elements * @beacon_ies: the information elements from the last Beacon frame - * @len_beacon_ies: total length of the beacon_ies * @proberesp_ies: the information elements from the last Probe Response frame - * @len_proberesp_ies: total length of the proberesp_ies * @signal: signal strength value (type depends on the wiphy's signal_type) * @free_priv: function pointer to free private data * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { + u64 tsf; + struct ieee80211_channel *channel; - u8 bssid[ETH_ALEN]; - u64 tsf; + const struct cfg80211_bss_ies __rcu *ies; + const struct cfg80211_bss_ies __rcu *beacon_ies; + const struct cfg80211_bss_ies __rcu *proberesp_ies; + + void (*free_priv)(struct cfg80211_bss *bss); + + s32 signal; + u16 beacon_interval; u16 capability; - u8 *information_elements; - size_t len_information_elements; - u8 *beacon_ies; - size_t len_beacon_ies; - u8 *proberesp_ies; - size_t len_proberesp_ies; - s32 signal; + u8 bssid[ETH_ALEN]; - void (*free_priv)(struct cfg80211_bss *bss); u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -1253,6 +1263,9 @@ struct cfg80211_bss { * ieee80211_bss_get_ie - find IE with given ID * @bss: the bss to search * @ie: the IE ID + * + * Note that the return value is an RCU-protected pointer, so + * rcu_read_lock() must be held when calling this function. * Returns %NULL if not found. */ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); -- cgit v1.2.3 From fe7ef5e9ba0c60bab01390493a4c6790f7b093af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 15:07:34 +0100 Subject: regulatory: remove handling of channel bandwidth The channel bandwidth handling isn't really quite right, it assumes that a 40 MHz channel is really two 20 MHz channels, which isn't strictly true. This is the way the regulatory database handling is defined right now though so remove the logic to handle other channel widths. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8e6a6b73b9c9..c222e5fbf53a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2938,10 +2938,6 @@ extern void wiphy_apply_custom_regulatory( * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for - * @desired_bw_khz: the desired max bandwidth you want to use per - * channel. Note that this is still 20 MHz if you want to use HT40 - * as HT40 makes use of two channels for its 40 MHz width bandwidth. - * If set to 0 we'll assume you want the standard 20 MHz. * @reg_rule: the regulatory rule which we have for this frequency * * Use this function to get the regulatory rule for a specific frequency on @@ -2956,9 +2952,7 @@ extern void wiphy_apply_custom_regulatory( * freq_in_rule_band() for our current definition of a band -- this is purely * subjective and right now its 802.11 specific. */ -extern int freq_reg_info(struct wiphy *wiphy, - u32 center_freq, - u32 desired_bw_khz, +extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule); /* -- cgit v1.2.3 From 458f4f9e960b9a3b674c4b87d996eef186b1fe83 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:47:38 +0100 Subject: regulatory: use RCU to protect global and wiphy regdomains To simplify the locking and not require cfg80211_mutex (which nl80211 uses to access the global regdomain) and also to make it possible for drivers to access their wiphy->regd safely, use RCU to protect these pointers. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c222e5fbf53a..f3be58a29642 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2369,7 +2369,7 @@ struct wiphy { /* fields below are read-only, assigned by cfg80211 */ - const struct ieee80211_regdomain *regd; + const struct ieee80211_regdomain __rcu *regd; /* the item in /sys/class/ieee80211/ points to this, * you need use set_wiphy_dev() (see below) */ -- cgit v1.2.3 From 361c9c8b0eeeec7d881e018d5143bf883558c566 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:57:14 +0100 Subject: regulatory: use IS_ERR macro family for freq_reg_info Instead of returning an error and filling a pointer return the pointer and an ERR_PTR value in error cases. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f3be58a29642..1f74360b527c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2938,22 +2938,22 @@ extern void wiphy_apply_custom_regulatory( * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for - * @reg_rule: the regulatory rule which we have for this frequency * * Use this function to get the regulatory rule for a specific frequency on * a given wireless device. If the device has a specific regulatory domain * it wants to follow we respect that unless a country IE has been received * and processed already. * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. + * When an error occurs, for example if no rule can be found, the return value + * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain + * the numeric return value. The numeric return value will be -ERANGE if we + * determine the given center_freq does not even have a regulatory rule for a + * frequency range in the center_freq's band. See freq_in_rule_band() for our + * current definition of a band -- this is purely subjective and right now it's + * 802.11 specific. */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, - const struct ieee80211_reg_rule **reg_rule); +const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, + u32 center_freq); /* * callbacks for asynchronous cfg80211 methods, notification -- cgit v1.2.3 From 1c06ef9831c78648f719a174e4598ae2600b0cf7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:22:02 +0100 Subject: wireless: use __aligned Use __aligned(...) instead of __attribute__((aligned(...))) in mac80211 and cfg80211. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1f74360b527c..e5f085c89221 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1256,7 +1256,7 @@ struct cfg80211_bss { u8 bssid[ETH_ALEN]; - u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 priv[0] __aligned(sizeof(void *)); }; /** @@ -2392,7 +2392,7 @@ struct wiphy { const struct iw_handler_def *wext; #endif - char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); + char priv[0] __aligned(NETDEV_ALIGN); }; static inline struct net *wiphy_net(struct wiphy *wiphy) -- cgit v1.2.3 From 81135548e697a24ab41944c4354953a71b0b9efe Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 6 Jan 2013 02:12:51 +0000 Subject: net: use ETHTOOL_FWVERS_LEN instead of ETHTOOL_BUSINFO_LEN for fw_ver strings Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/net/cfg80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8e6a6b73b9c9..f78fa19a07b0 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2333,7 +2333,7 @@ struct wiphy { u32 rts_threshold; u8 coverage_class; - char fw_version[ETHTOOL_BUSINFO_LEN]; + char fw_version[ETHTOOL_FWVERS_LEN]; u32 hw_version; #ifdef CONFIG_PM -- cgit v1.2.3 From 0c0280bd0ba410326eecdaeb1b936696eda6381d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 11 Jan 2013 18:39:36 +0000 Subject: wireless: make the reg_notifier() void The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: Luis R. Rodriguez [move lbs_reg_notifier to not break compile] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e5f085c89221..4275127da05a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2364,8 +2364,8 @@ struct wiphy { struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); /* fields below are read-only, assigned by cfg80211 */ -- cgit v1.2.3 From 0ae997dc75efb60d47f0c71890f1e972f7d462c1 Mon Sep 17 00:00:00 2001 From: Yacine Belkadi Date: Sat, 12 Jan 2013 13:54:14 +0100 Subject: {cfg,mac}80211.h: fix some kernel-doc warnings When building the 80211 DocBook, scripts/kernel-doc reports the following type of warnings: Warning(include/net/cfg80211.h:334): No description found for return value of 'cfg80211_get_chandef_type' These warnings are only reported when scripts/kernel-doc runs in verbose mode. To fix these use "Return:" to describe function return values. Signed-off-by: Yacine Belkadi [adjust for freq_reg_info() change] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 159 +++++++++++++++++++++++++++++-------------------- 1 file changed, 93 insertions(+), 66 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 4275127da05a..3d8717a0d3b2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -326,7 +326,7 @@ struct cfg80211_chan_def { * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * - * Returns the old channel type (NOHT, HT20, HT40+/-) from a given + * Return: The old channel type (NOHT, HT20, HT40+/-) from a given * chandef, which must have a bandwidth allowing this conversion. */ static inline enum nl80211_channel_type @@ -364,7 +364,7 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %true if the channels defined by the channel definitions are + * Return: %true if the channels defined by the channel definitions are * identical, %false otherwise. */ static inline bool @@ -382,7 +382,7 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %NULL if the given channel definitions are incompatible, + * Return: %NULL if the given channel definitions are incompatible, * chandef1 or chandef2 otherwise. */ const struct cfg80211_chan_def * @@ -392,6 +392,7 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, /** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check + * Return: %true if the channel definition is valid. %false otherwise. */ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); @@ -399,7 +400,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); * cfg80211_chandef_usable - check if secondary channels can be used * @wiphy: the wiphy to validate against * @chandef: the channel definition to check - * @prohibited_flags: the regulatory chanenl flags that must not be set + * @prohibited_flags: the regulatory channel flags that must not be set + * Return: %true if secondary channels are usable. %false otherwise. */ bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, @@ -1266,7 +1268,7 @@ struct cfg80211_bss { * * Note that the return value is an RCU-protected pointer, so * rcu_read_lock() must be held when calling this function. - * Returns %NULL if not found. + * Return: %NULL if not found. */ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); @@ -2409,6 +2411,7 @@ static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) * wiphy_priv - return priv from wiphy * * @wiphy: the wiphy whose priv pointer to return + * Return: The priv of @wiphy. */ static inline void *wiphy_priv(struct wiphy *wiphy) { @@ -2420,6 +2423,7 @@ static inline void *wiphy_priv(struct wiphy *wiphy) * priv_to_wiphy - return the wiphy containing the priv * * @priv: a pointer previously returned by wiphy_priv + * Return: The wiphy of @priv. */ static inline struct wiphy *priv_to_wiphy(void *priv) { @@ -2442,6 +2446,7 @@ static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) * wiphy_dev - get wiphy dev pointer * * @wiphy: The wiphy whose device struct to look up + * Return: The dev of @wiphy. */ static inline struct device *wiphy_dev(struct wiphy *wiphy) { @@ -2452,6 +2457,7 @@ static inline struct device *wiphy_dev(struct wiphy *wiphy) * wiphy_name - get wiphy name * * @wiphy: The wiphy whose name to return + * Return: The name of @wiphy. */ static inline const char *wiphy_name(const struct wiphy *wiphy) { @@ -2467,8 +2473,8 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) * Create a new wiphy and associate the given operations with it. * @sizeof_priv bytes are allocated for private use. * - * The returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. + * Return: A pointer to the new wiphy. This pointer must be + * assigned to each netdev's ieee80211_ptr for proper operation. */ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); @@ -2477,7 +2483,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); * * @wiphy: The wiphy to register. * - * Returns a non-negative wiphy index or a negative error code. + * Return: A non-negative wiphy index or a negative error code. */ extern int wiphy_register(struct wiphy *wiphy); @@ -2626,6 +2632,7 @@ static inline u8 *wdev_address(struct wireless_dev *wdev) * wdev_priv - return wiphy priv from wireless_dev * * @wdev: The wireless device whose wiphy's priv pointer to return + * Return: The wiphy priv of @wdev. */ static inline void *wdev_priv(struct wireless_dev *wdev) { @@ -2643,12 +2650,14 @@ static inline void *wdev_priv(struct wireless_dev *wdev) * ieee80211_channel_to_frequency - convert channel number to frequency * @chan: channel number * @band: band, necessary due to channel number overlap + * Return: The corresponding frequency (in MHz), or 0 if the conversion failed. */ extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); /** * ieee80211_frequency_to_channel - convert frequency to channel number * @freq: center frequency + * Return: The corresponding channel, or 0 if the conversion failed. */ extern int ieee80211_frequency_to_channel(int freq); @@ -2665,6 +2674,7 @@ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, * ieee80211_get_channel - get channel struct from wiphy for specified frequency * @wiphy: the struct wiphy to get the channel for * @freq: the center frequency of the channel + * Return: The channel struct from @wiphy at @freq. */ static inline struct ieee80211_channel * ieee80211_get_channel(struct wiphy *wiphy, int freq) @@ -2679,10 +2689,10 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) * @basic_rates: bitmap of basic rates * @bitrate: the bitrate for which to find the basic rate * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. + * Return: The basic rate corresponding to a given bitrate, that + * is the next lower bitrate contained in the basic rate map, + * which is, for this function, given as a bitmap of indices of + * rates in the band's bitrate table. */ struct ieee80211_rate * ieee80211_get_response_rate(struct ieee80211_supported_band *sband, @@ -2775,18 +2785,21 @@ extern const unsigned char bridge_tunnel_header[6]; /** * ieee80211_get_hdrlen_from_skb - get header length from data * + * @skb: the frame + * * Given an skb with a raw 802.11 header at the data pointer this function - * returns the 802.11 header length in bytes (not including encryption - * headers). If the data in the sk_buff is too short to contain a valid 802.11 - * header the function returns 0. + * returns the 802.11 header length. * - * @skb: the frame + * Return: The 802.11 header length in bytes (not including encryption + * headers). Or 0 if the data in the sk_buff is too short to contain a valid + * 802.11 header. */ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); /** * ieee80211_hdrlen - get header length in bytes from frame control * @fc: frame control field in little-endian format + * Return: The header length in bytes. */ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); @@ -2794,7 +2807,7 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); * ieee80211_get_mesh_hdrlen - get mesh extension header length * @meshhdr: the mesh extension header, only the flags field * (first byte) will be accessed - * Returns the length of the extension header, which is always at + * Return: The length of the extension header, which is always at * least 6 bytes and at most 18 if address 5 and 6 are present. */ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); @@ -2812,6 +2825,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); * @skb: the 802.11 data frame * @addr: the device MAC address * @iftype: the virtual interface type + * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype); @@ -2823,6 +2837,7 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, * @iftype: the virtual interface type * @bssid: the network bssid (used only for iftype STATION and ADHOC) * @qos: build 802.11 QoS data frame + * Return: 0 on success, or a negative error code. */ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype, u8 *bssid, bool qos); @@ -2850,6 +2865,7 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, /** * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame * @skb: the data frame + * Return: The 802.1p/1d tag. */ unsigned int cfg80211_classify8021d(struct sk_buff *skb); @@ -2860,12 +2876,13 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the element ID could - * not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the element ID could not be found or if + * the element is invalid (claims to be longer than the given + * data), or a pointer to the first byte of the requested + * element, that is the byte containing the element ID. + * + * Note: There are no checks on the element length other than + * having to fit into the given data. */ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); @@ -2877,12 +2894,13 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the vendor specific element ID - * could not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the vendor specific element ID could not be found or if the + * element is invalid (claims to be longer than the given data), or a pointer to + * the first byte of the requested element, that is the byte containing the + * element ID. + * + * Note: There are no checks on the element length other than having to fit into + * the given data. */ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, const u8 *ies, int len); @@ -2915,6 +2933,8 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, * * Drivers should check the return value, its possible you can get * an -ENOMEM. + * + * Return: 0 on success. -ENOMEM. */ extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); @@ -2944,13 +2964,13 @@ extern void wiphy_apply_custom_regulatory( * it wants to follow we respect that unless a country IE has been received * and processed already. * - * When an error occurs, for example if no rule can be found, the return value - * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain - * the numeric return value. The numeric return value will be -ERANGE if we - * determine the given center_freq does not even have a regulatory rule for a - * frequency range in the center_freq's band. See freq_in_rule_band() for our - * current definition of a band -- this is purely subjective and right now it's - * 802.11 specific. + * Return: A valid pointer, or, when an error occurs, for example if no rule + * can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to + * check and PTR_ERR() to obtain the numeric return value. The numeric return + * value will be -ERANGE if we determine the given center_freq does not even + * have a regulatory rule for a frequency range in the center_freq's band. + * See freq_in_rule_band() for our current definition of a band -- this is + * purely subjective and right now it's 802.11 specific. */ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, u32 center_freq); @@ -3000,7 +3020,8 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy); * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss_frame(struct wiphy *wiphy, @@ -3025,7 +3046,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss(struct wiphy *wiphy, @@ -3302,16 +3324,18 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); * the testmode command. Since it is intended for a reply, calling * it outside of the @testmode_cmd operation is invalid. * - * The returned skb (or %NULL if any errors happen) is pre-filled - * with the wiphy index and set up in a way that any data that is - * put into the skb (with skb_put(), nla_put() or similar) will end - * up being within the %NL80211_ATTR_TESTDATA attribute, so all that - * needs to be done with the skb is adding data for the corresponding - * userspace tool which can then read that data out of the testdata - * attribute. You must not modify the skb in any other way. + * The returned skb is pre-filled with the wiphy index and set up in + * a way that any data that is put into the skb (with skb_put(), + * nla_put() or similar) will end up being within the + * %NL80211_ATTR_TESTDATA attribute, so all that needs to be done + * with the skb is adding data for the corresponding userspace tool + * which can then read that data out of the testdata attribute. You + * must not modify the skb in any other way. * * When done, call cfg80211_testmode_reply() with the skb and return * its error code as the result of the @testmode_cmd operation. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, int approxlen); @@ -3321,11 +3345,12 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, * @skb: The skb, must have been allocated with * cfg80211_testmode_alloc_reply_skb() * - * Returns an error code or 0 on success, since calling this - * function will usually be the last thing before returning - * from the @testmode_cmd you should return the error code. - * Note that this function consumes the skb regardless of the - * return value. + * Since calling this function will usually be the last thing + * before returning from the @testmode_cmd you should return + * the error code. Note that this function consumes the skb + * regardless of the return value. + * + * Return: An error code or 0 on success. */ int cfg80211_testmode_reply(struct sk_buff *skb); @@ -3339,14 +3364,16 @@ int cfg80211_testmode_reply(struct sk_buff *skb); * This function allocates and pre-fills an skb for an event on the * testmode multicast group. * - * The returned skb (or %NULL if any errors happen) is set up in the - * same way as with cfg80211_testmode_alloc_reply_skb() but prepared - * for an event. As there, you should simply add data to it that will - * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must - * not modify the skb in any other way. + * The returned skb is set up in the same way as with + * cfg80211_testmode_alloc_reply_skb() but prepared for an event. As + * there, you should simply add data to it that will then end up in the + * %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb + * in any other way. * * When done filling the skb, call cfg80211_testmode_event() with the * skb to send the event. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp); @@ -3527,13 +3554,13 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * @len: length of the frame data * @gfp: context flags * - * Returns %true if a user space application has registered for this frame. + * This function is called whenever an Action frame is received for a station + * mode interface, but is not processed in kernel. + * + * Return: %true if a user space application has registered for this frame. * For action frames, that makes it responsible for rejecting unrecognized * action frames; %false otherwise, in which case for action frames the * driver is responsible for rejecting the frame. - * - * This function is called whenever an Action frame is received for a station - * mode interface, but is not processed in kernel. */ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, const u8 *buf, size_t len, gfp_t gfp); @@ -3625,7 +3652,7 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, * This function is used in AP mode (only!) to inform userspace that * a spurious class 3 frame was received, to be able to deauth the * sender. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_spurious_frame(struct net_device *dev, @@ -3641,7 +3668,7 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev, * an associated station sent a 4addr frame but that wasn't expected. * It is allowed and desirable to send this event only once for each * station to avoid event flooding. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, @@ -3679,8 +3706,8 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, * @wiphy: the wiphy * @chandef: the channel definition * - * This function returns true if there is no secondary channel or the secondary - * channel(s) can be used for beaconing (i.e. is not a radar channel etc.) + * Return: %true if there is no secondary channel or the secondary channel(s) + * can be used for beaconing (i.e. is not a radar channel etc.) */ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, struct cfg80211_chan_def *chandef); @@ -3750,9 +3777,9 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev); * The function finds a given P2P attribute in the (vendor) IEs and * copies its contents to the given buffer. * - * The return value is a negative error code (-%EILSEQ or -%ENOENT) if - * the data is malformed or the attribute can't be found (respectively), - * or the length of the found attribute (which can be zero). + * Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is + * malformed or the attribute can't be found (respectively), or the + * length of the found attribute (which can be zero). */ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, -- cgit v1.2.3 From 9bdbf04db099c11bbbaea9dcea7465c508531fb8 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:51 +0100 Subject: {cfg,nl,mac}80211: set beacon interval and DTIM period on mesh join Move the default mesh beacon interval and DTIM period to cfg80211 and make them accessible to nl80211. This enables setting both values when joining an MBSS. Previously the DTIM parameter was not set by mac80211 so the driver's default value was used. Signed-off-by: Marco Porsch Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3d8717a0d3b2..516aded3697f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1036,6 +1036,8 @@ struct mesh_config { * @ie_len: length of vendor information elements * @is_authenticated: this mesh requires authentication * @is_secure: this mesh uses security + * @dtim_period: DTIM period to use + * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] * * These parameters are fixed when the mesh is created. @@ -1051,6 +1053,8 @@ struct mesh_setup { u8 ie_len; bool is_authenticated; bool is_secure; + u8 dtim_period; + u16 beacon_interval; int mcast_rate[IEEE80211_NUM_BANDS]; }; -- cgit v1.2.3 From 3b1c5a5307fb5277f395efdcf330c064d79df07d Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:52 +0100 Subject: {cfg,nl}80211: mesh power mode primitives and userspace access Add the nl80211_mesh_power_mode enumeration which holds possible values for the mesh power mode. These modes are unknown, active, light sleep and deep sleep. Add power_mode entry to the mesh config structure to hold the user-configured default mesh power mode. This value will be used for new peer links. Add the dot11MeshAwakeWindowDuration value to the mesh config. The awake window is a duration in TU describing how long the STA will stay awake after transmitting its beacon in PS mode. Add access routines to: - get/set local link-specific power mode (STA) - get remote STA's link-specific power mode (STA) - get remote STA's non-peer power mode (STA) - get/set default mesh power mode (mesh config) - get/set mesh awake window duration (mesh config) All config changes may be done at mesh runtime and take effect immediately. Signed-off-by: Marco Porsch Signed-off-by: Ivan Bezyazychnyy Signed-off-by: Mike Krinkin [fix commit message line length, error handling in set station] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 516aded3697f..d9f08f65f7a5 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -610,6 +610,8 @@ enum station_parameters_apply_mask { * @sta_modify_mask: bitmap indicating which parameters changed * (for those that don't have a natural "no change" value), * see &enum station_parameters_apply_mask + * @local_pm: local link-specific mesh power save mode (no change when set + * to unknown) */ struct station_parameters { u8 *supported_rates; @@ -625,6 +627,7 @@ struct station_parameters { struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; + enum nl80211_mesh_power_mode local_pm; }; /** @@ -655,6 +658,9 @@ struct station_parameters { * @STATION_INFO_STA_FLAGS: @sta_flags filled * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled * @STATION_INFO_T_OFFSET: @t_offset filled + * @STATION_INFO_LOCAL_PM: @local_pm filled + * @STATION_INFO_PEER_PM: @peer_pm filled + * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -678,6 +684,9 @@ enum station_info_flags { STATION_INFO_STA_FLAGS = 1<<18, STATION_INFO_BEACON_LOSS_COUNT = 1<<19, STATION_INFO_T_OFFSET = 1<<20, + STATION_INFO_LOCAL_PM = 1<<21, + STATION_INFO_PEER_PM = 1<<22, + STATION_INFO_NONPEER_PM = 1<<23, }; /** @@ -791,6 +800,9 @@ struct sta_bss_parameters { * @sta_flags: station flags mask & values * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. + * @local_pm: local mesh STA power save mode + * @peer_pm: peer mesh STA power save mode + * @nonpeer_pm: non-peer mesh STA power save mode */ struct station_info { u32 filled; @@ -820,6 +832,9 @@ struct station_info { u32 beacon_loss_count; s64 t_offset; + enum nl80211_mesh_power_mode local_pm; + enum nl80211_mesh_power_mode peer_pm; + enum nl80211_mesh_power_mode nonpeer_pm; /* * Note: Add a new enum station_info_flags value for each new field and @@ -995,6 +1010,10 @@ struct bss_parameters { * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) * during which a mesh STA can send only one Action frame containing * a PREQ element for root path confirmation. + * @power_mode: The default mesh power save mode which will be the initial + * setting for new peer links. + * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake + * after transmitting its beacon. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1022,6 +1041,8 @@ struct mesh_config { u32 dot11MeshHWMPactivePathToRootTimeout; u16 dot11MeshHWMProotInterval; u16 dot11MeshHWMPconfirmationInterval; + enum nl80211_mesh_power_mode power_mode; + u16 dot11MeshAwakeWindowDuration; }; /** -- cgit v1.2.3 From 1c18f1452a772dfe884ed25677bddb3ecaf9c43a Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 8 Jan 2013 10:17:27 +0100 Subject: nl80211: allow user-space to set address for P2P_DEVICE As per email discussion Jouni Malinen pointed out that: "P2P message exchanges can be executed on the current operating channel of any operation (both P2P and non-P2P station). These can be on 5 GHz and even on 60 GHz (so yes, you _can_ do GO Negotiation on 60 GHz). As an example, it would be possible to receive a GO Negotiation Request frame on a 5 GHz only radio and then to complete GO Negotiation on that band. This can happen both when connected to a P2P group (through client discoverability mechanism) and when connected to a legacy AP (assuming the station receive Probe Request frame from full scan in the beginning of P2P device discovery)." This means that P2P messages can be sent over different radio devices. However, these should use the same P2P device address so it should be able to provision this from user-space. This patch adds a parameter for this to struct vif_params which should only be used during creation of the P2P device interface. Cc: Jouni Malinen Cc: Greg Goldman Cc: Jithu Jance Signed-off-by: Arend van Spriel [add error checking] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d9f08f65f7a5..d81e730962cc 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -281,9 +281,13 @@ struct ieee80211_supported_band { /** * struct vif_params - describes virtual interface parameters * @use_4addr: use 4-address frames + * @macaddr: address to use for this virtual interface. This will only + * be used for non-netdevice interfaces. If this parameter is set + * to zero address the driver may determine the address as needed. */ struct vif_params { int use_4addr; + u8 macaddr[ETH_ALEN]; }; /** -- cgit v1.2.3 From cee00a959c0a86571e6f99cf42f0261d7e54d2ae Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 15 Jan 2013 17:15:57 +0200 Subject: cfg80211: Allow use_mfp to be specified with the connect command The NL80211_ATTR_USE_MFP attribute was originally added for NL80211_CMD_ASSOCIATE, but it is actually as useful (if not even more useful) with NL80211_CMD_CONNECT, so process that attribute with the connect command, too. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d81e730962cc..f1686d460e6b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1465,6 +1465,7 @@ struct cfg80211_ibss_params { * @ie: IEs for association request * @ie_len: Length of assoc_ie in octets * @privacy: indicates whether privacy-enabled APs should be used + * @mfp: indicate whether management frame protection is used * @crypto: crypto settings * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication @@ -1485,6 +1486,7 @@ struct cfg80211_connect_params { u8 *ie; size_t ie_len; bool privacy; + enum nl80211_mfp mfp; struct cfg80211_crypto_settings crypto; const u8 *key; u8 key_len, key_idx; -- cgit v1.2.3 From 11c4a075db2f8774d37544342c8cb9752b4db9e1 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 8 Jan 2013 14:04:07 +0100 Subject: cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f1686d460e6b..970da4420676 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2125,6 +2125,7 @@ struct ieee80211_iface_limit { * @beacon_int_infra_match: In this combination, the beacon intervals * between infrastructure and AP types must match. This is required * only in special cases. + * @radar_detect_widths: bitmap of channel widths supported for radar detection * * These examples can be expressed as follows: * @@ -2177,6 +2178,7 @@ struct ieee80211_iface_combination { u16 max_interfaces; u8 n_limits; bool beacon_int_infra_match; + u8 radar_detect_widths; }; struct mac_address { -- cgit v1.2.3 From 6d45a74b1f2e42e41c9931bfb35cdb789d0bb3ea Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 18 Jan 2013 11:18:44 +0530 Subject: cfg80211: Move the definition of struct mac_address up struct mac_address will be used by ACL related configuration ops. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 970da4420676..183033789e69 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -527,6 +527,10 @@ struct cfg80211_beacon_data { size_t probe_resp_len; }; +struct mac_address { + u8 addr[ETH_ALEN]; +}; + /** * struct cfg80211_ap_settings - AP configuration * @@ -2181,10 +2185,6 @@ struct ieee80211_iface_combination { u8 radar_detect_widths; }; -struct mac_address { - u8 addr[ETH_ALEN]; -}; - struct ieee80211_txrx_stypes { u16 tx, rx; }; -- cgit v1.2.3 From 77765eaf5cfb6b8dd98ec8b54b411d74ff6095f1 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 18 Jan 2013 11:18:45 +0530 Subject: cfg80211/nl80211: add API for MAC address ACLs Add API to enable drivers to implement MAC address based access control in AP/P2P GO mode. Capable drivers advertise this capability by setting the maximum number of MAC addresses in such a list in wiphy->max_acl_mac_addrs. An initial ACL may be given to the NL80211_CMD_START_AP command and/or changed later with NL80211_CMD_SET_MAC_ACL. Black- and whitelists are supported, but not simultaneously. Signed-off-by: Vasanthakumar Thiagarajan [rewrite commit log, many cleanups] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 183033789e69..36e076e374d2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -531,6 +531,22 @@ struct mac_address { u8 addr[ETH_ALEN]; }; +/** + * struct cfg80211_acl_data - Access control list data + * + * @acl_policy: ACL policy to be applied on the station's + entry specified by mac_addr + * @n_acl_entries: Number of MAC address entries passed + * @mac_addrs: List of MAC addresses of stations to be used for ACL + */ +struct cfg80211_acl_data { + enum nl80211_acl_policy acl_policy; + int n_acl_entries; + + /* Keep it last */ + struct mac_address mac_addrs[]; +}; + /** * struct cfg80211_ap_settings - AP configuration * @@ -550,6 +566,8 @@ struct mac_address { * @inactivity_timeout: time in seconds to determine station's inactivity. * @p2p_ctwindow: P2P CT Window * @p2p_opp_ps: P2P opportunistic PS + * @acl: ACL configuration used by the drivers which has support for + * MAC address based access control */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -566,6 +584,7 @@ struct cfg80211_ap_settings { int inactivity_timeout; u8 p2p_ctwindow; bool p2p_opp_ps; + const struct cfg80211_acl_data *acl; }; /** @@ -1800,6 +1819,13 @@ struct cfg80211_gtk_rekey_data { * * @start_p2p_device: Start the given P2P device. * @stop_p2p_device: Stop the given P2P device. + * + * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode. + * Parameters include ACL policy, an array of MAC address of stations + * and the number of MAC addresses. If there is already a list in driver + * this new list replaces the existing one. Driver has to clear its ACL + * when number of MAC addresses entries is passed as 0. Drivers which + * advertise the support for MAC based ACL have to implement this callback. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2020,6 +2046,9 @@ struct cfg80211_ops { struct wireless_dev *wdev); void (*stop_p2p_device)(struct wiphy *wiphy, struct wireless_dev *wdev); + + int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, + const struct cfg80211_acl_data *params); }; /* @@ -2325,6 +2354,9 @@ struct wiphy_wowlan_support { * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. * @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden. * If null, then none can be over-ridden. + * + * @max_acl_mac_addrs: Maximum number of MAC addresses that the device + * supports for ACL. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2346,6 +2378,8 @@ struct wiphy { /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; + u16 max_acl_mac_addrs; + u32 flags, features; u32 ap_sme_capa; -- cgit v1.2.3 From cd8f7cb4e6dfa4ea08fc250a814240b883ef7911 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 22 Jan 2013 12:34:29 +0100 Subject: cfg80211/mac80211: support reporting wakeup reason When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 36e076e374d2..48add7e3ba1d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1596,6 +1596,32 @@ struct cfg80211_wowlan { int n_patterns; }; +/** + * struct cfg80211_wowlan_wakeup - wakeup report + * @disconnect: woke up by getting disconnected + * @magic_pkt: woke up by receiving magic packet + * @gtk_rekey_failure: woke up by GTK rekey failure + * @eap_identity_req: woke up by EAP identity request packet + * @four_way_handshake: woke up by 4-way handshake + * @rfkill_release: woke up by rfkill being released + * @pattern_idx: pattern that caused wakeup, -1 if not due to pattern + * @packet_present_len: copied wakeup packet data + * @packet_len: original wakeup packet length + * @packet: The packet causing the wakeup, if any. + * @packet_80211: For pattern match, magic packet and other data + * frame triggers an 802.3 frame should be reported, for + * disconnect due to deauth 802.11 frame. This indicates which + * it is. + */ +struct cfg80211_wowlan_wakeup { + bool disconnect, magic_pkt, gtk_rekey_failure, + eap_identity_req, four_way_handshake, + rfkill_release, packet_80211; + s32 pattern_idx; + u32 packet_present_len, packet_len; + const void *packet; +}; + /** * struct cfg80211_gtk_rekey_data - rekey data * @kek: key encryption key @@ -3852,6 +3878,21 @@ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, u8 *buf, unsigned int bufsize); +/** + * cfg80211_report_wowlan_wakeup - report wakeup from WoWLAN + * @wdev: the wireless device reporting the wakeup + * @wakeup: the wakeup report + * @gfp: allocation flags + * + * This function reports that the given device woke up. If it + * caused the wakeup, report the reason(s), otherwise you may + * pass %NULL as the @wakeup parameter to advertise that something + * else caused the wakeup. + */ +void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ -- cgit v1.2.3 From 3ff9a827c683353b9826ef57366b0f313acc21b0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 22:37:48 +0100 Subject: cfg80211: remove free_priv BSS API Now that mac80211 no longer uses this API, remove it completely. If anyone needs it again, we can revert this patch of course, but mac80211 was the only user right now. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 48add7e3ba1d..63599ab6005b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1289,7 +1289,6 @@ struct cfg80211_bss_ies { * @beacon_ies: the information elements from the last Beacon frame * @proberesp_ies: the information elements from the last Probe Response frame * @signal: signal strength value (type depends on the wiphy's signal_type) - * @free_priv: function pointer to free private data * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { @@ -1301,8 +1300,6 @@ struct cfg80211_bss { const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; - void (*free_priv)(struct cfg80211_bss *bss); - s32 signal; u16 beacon_interval; -- cgit v1.2.3 From 42745e039312ab4672c60ec584651f0c74e8264f Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 4 Feb 2013 13:53:11 +0200 Subject: cfg80211: expand per-station byte counters to 64bit In per-station statistics, present 32bit counters are too small for practical purposes - with gigabit speeds, it get overlapped every few seconds. Expand counters in the struct station_info to be 64-bit. Driver can still fill only 32-bit and indicate in @filled only bits like STATION_INFO_[TR]X_BYTES; in case driver provides full 64-bit counter, it should also set in @filled bit STATION_INFO_[TR]RX_BYTES64 Netlink sends both 32-bit and 64-bit counters, if present, to not break userspace. Signed-off-by: Vladimir Kondratiev [change to also have 32-bit counters if driver advertises 64-bit] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 63599ab6005b..94a0810ef68e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -672,8 +672,10 @@ struct station_parameters { * @STATION_INFO_SIGNAL: @signal filled * @STATION_INFO_TX_BITRATE: @txrate fields are filled * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) - * @STATION_INFO_RX_PACKETS: @rx_packets filled - * @STATION_INFO_TX_PACKETS: @tx_packets filled + * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value + * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value + * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value + * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -714,6 +716,8 @@ enum station_info_flags { STATION_INFO_LOCAL_PM = 1<<21, STATION_INFO_PEER_PM = 1<<22, STATION_INFO_NONPEER_PM = 1<<23, + STATION_INFO_RX_BYTES64 = 1<<24, + STATION_INFO_TX_BYTES64 = 1<<25, }; /** @@ -835,8 +839,8 @@ struct station_info { u32 filled; u32 connected_time; u32 inactive_time; - u32 rx_bytes; - u32 tx_bytes; + u64 rx_bytes; + u64 tx_bytes; u16 llid; u16 plid; u8 plink_state; -- cgit v1.2.3 From 37e0838117084eb957fdf124bf555f4b9933a5a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 08:50:37 +0100 Subject: cfg80211: remove unused cfg80211_get_mesh As Thomas pointed out, cfg80211_get_mesh() is unused and can be removed. Cc: Thomas Pedersen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 94a0810ef68e..3ec70e1681d3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3164,10 +3164,6 @@ cfg80211_get_ibss(struct wiphy *wiphy, WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); } -struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, - struct ieee80211_channel *channel, - const u8 *meshid, size_t meshidlen, - const u8 *meshcfg); /** * cfg80211_ref_bss - reference BSS struct * @bss: the BSS struct to reference -- cgit v1.2.3 From 5b112d3d098c97b867cc580f590395cd1e72f18c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:49:58 +0100 Subject: cfg80211: pass wiphy to cfg80211_ref_bss/put_bss This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao [mwifiex] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3ec70e1681d3..691b347545cb 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3166,19 +3166,21 @@ cfg80211_get_ibss(struct wiphy *wiphy, /** * cfg80211_ref_bss - reference BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct to reference * * Increments the refcount of the given BSS struct. */ -void cfg80211_ref_bss(struct cfg80211_bss *bss); +void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_put_bss - unref BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct * * Decrements the refcount of the given BSS struct. */ -void cfg80211_put_bss(struct cfg80211_bss *bss); +void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_unlink_bss - unlink BSS from internal data structures -- cgit v1.2.3 From 077f897a8be9c617e69035af4d17a472d4af272b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 09:06:36 +0100 Subject: wireless: fix kernel-doc Fix most kernel-doc warnings, for some reason it seems to have issues with __aligned, don't remove the documentation entries it considers to be in excess due to that. Reported-by: Fengguang Wu Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 691b347545cb..5d8554bd95da 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -535,7 +535,7 @@ struct mac_address { * struct cfg80211_acl_data - Access control list data * * @acl_policy: ACL policy to be applied on the station's - entry specified by mac_addr + * entry specified by mac_addr * @n_acl_entries: Number of MAC address entries passed * @mac_addrs: List of MAC addresses of stations to be used for ACL */ @@ -666,6 +666,8 @@ struct station_parameters { * @STATION_INFO_INACTIVE_TIME: @inactive_time filled * @STATION_INFO_RX_BYTES: @rx_bytes filled * @STATION_INFO_TX_BYTES: @tx_bytes filled + * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value + * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value * @STATION_INFO_LLID: @llid filled * @STATION_INFO_PLID: @plid filled * @STATION_INFO_PLINK_STATE: @plink_state filled @@ -674,8 +676,6 @@ struct station_parameters { * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value - * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value - * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -1226,6 +1226,7 @@ struct cfg80211_match_set { * @n_match_sets: number of match sets * @wiphy: the wiphy this was for * @dev: the interface + * @scan_start: start time of the scheduled scan * @channels: channels to scan * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ @@ -1404,6 +1405,8 @@ struct cfg80211_assoc_request { * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the deauthentication + * @local_state_change: if set, change local state only and + * do not set a deauth frame */ struct cfg80211_deauth_request { const u8 *bssid; @@ -2629,7 +2632,6 @@ struct cfg80211_cached_keys; * the user-set AP, monitor and WDS channel * @preset_chan: (private) Used by the internal configuration code to * track the channel to be used for AP later - * @preset_chantype: (private) the corresponding channel type * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code -- cgit v1.2.3 From 776b3580178f2065838fa0db0eb7a41b57495c0a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 02:06:18 +0100 Subject: cfg80211: track hidden SSID networks properly Currently, cfg80211 will copy beacon IEs from a previously received hidden SSID beacon to a probe response entry, if that entry is created after the beacon entry. However, if it is the other way around, or if the beacon is updated, such changes aren't propagated. Fix this by tracking the relation between the probe response and beacon BSS structs in this case. In case drivers have private data stored in a BSS struct and need access to such data from a beacon entry, cfg80211 now provides the hidden_beacon_bss pointer from the probe response entry to the beacon entry. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5d8554bd95da..04a702d1f2a5 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1292,7 +1292,14 @@ struct cfg80211_bss_ies { * either the beacon_ies or proberesp_ies depending on whether Probe * Response frame has been received * @beacon_ies: the information elements from the last Beacon frame + * (implementation note: if @hidden_beacon_bss is set this struct doesn't + * own the beacon_ies, but they're just pointers to the ones from the + * @hidden_beacon_bss struct) * @proberesp_ies: the information elements from the last Probe Response frame + * @hidden_beacon_bss: in case this BSS struct represents a probe response from + * a BSS that hides the SSID in its beacon, this points to the BSS struct + * that holds the beacon data. @beacon_ies is still valid, of course, and + * points to the same data as hidden_beacon_bss->beacon_ies in that case. * @signal: signal strength value (type depends on the wiphy's signal_type) * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ @@ -1305,6 +1312,8 @@ struct cfg80211_bss { const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; + struct cfg80211_bss *hidden_beacon_bss; + s32 signal; u16 beacon_interval; -- cgit v1.2.3 From 83c7aa1a1475ae1c42640ab6e4559016142efc67 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:51:29 +0100 Subject: cfg80211: remove scan ies NULL check There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 04a702d1f2a5..fb766314b3a1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1287,10 +1287,10 @@ struct cfg80211_bss_ies { * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order - * @ies: the information elements (Note that there - * is no guarantee that these are well-formed!); this is a pointer to - * either the beacon_ies or proberesp_ies depending on whether Probe - * Response frame has been received + * @ies: the information elements (Note that there is no guarantee that these + * are well-formed!); this is a pointer to either the beacon_ies or + * proberesp_ies depending on whether Probe Response frame has been + * received. It is always non-%NULL. * @beacon_ies: the information elements from the last Beacon frame * (implementation note: if @hidden_beacon_bss is set this struct doesn't * own the beacon_ies, but they're just pointers to the ones from the -- cgit v1.2.3 From 8cef2c9df88fdd13f518e6607de9d664b31f26cc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:54:31 +0100 Subject: cfg80211: move TSF into IEs While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fb766314b3a1..77686ca28948 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1266,11 +1266,13 @@ enum cfg80211_signal_type { /** * struct cfg80211_bss_ie_data - BSS entry IE data + * @tsf: TSF contained in the frame that carried these IEs * @rcu_head: internal use, for freeing * @len: length of the IEs * @data: IE data */ struct cfg80211_bss_ies { + u64 tsf; struct rcu_head rcu_head; int len; u8 data[]; @@ -1284,7 +1286,6 @@ struct cfg80211_bss_ies { * * @channel: channel this BSS is on * @bssid: BSSID of the BSS - * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order * @ies: the information elements (Note that there is no guarantee that these @@ -1304,8 +1305,6 @@ struct cfg80211_bss_ies { * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { - u64 tsf; - struct ieee80211_channel *channel; const struct cfg80211_bss_ies __rcu *ies; -- cgit v1.2.3 From bb92d19983a4b54be3e3b83441a8076d92cd04bc Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 12 Feb 2013 12:16:26 -0800 Subject: nl80211: add packet offset information for wowlan pattern If user knows the location of a wowlan pattern to be matched in Rx packet, he can provide an offset with the pattern. This will help drivers to ignore initial bytes and match the pattern efficiently. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao [refactor pattern sending] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 77686ca28948..d3a73818e44c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1576,6 +1576,7 @@ struct cfg80211_pmksa { * one bit per byte, in same format as nl80211 * @pattern: bytes to match where bitmask is 1 * @pattern_len: length of pattern (in bytes) + * @pkt_offset: packet offset (in bytes) * * Internal note: @mask and @pattern are allocated in one chunk of * memory, free @mask only! @@ -1583,6 +1584,7 @@ struct cfg80211_pmksa { struct cfg80211_wowlan_trig_pkt_pattern { u8 *mask, *pattern; int pattern_len; + int pkt_offset; }; /** @@ -2290,12 +2292,14 @@ enum wiphy_wowlan_support_flags { * (see nl80211.h for the pattern definition) * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern + * @max_pkt_offset: maximum Rx packet offset */ struct wiphy_wowlan_support { u32 flags; int n_patterns; int pattern_max_len; int pattern_min_len; + int max_pkt_offset; }; /** -- cgit v1.2.3 From 2a0e047ed62f20664005881b8e7f9328f910316a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Jan 2013 22:57:40 +0100 Subject: cfg80211: configuration for WoWLAN over TCP Intel Wireless devices are able to make a TCP connection after suspending, sending some data and waking up when the connection receives wakeup data (or breaks). Add the WoWLAN configuration and feature advertising API for it. Acked-by: David S. Miller Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 55 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 54 insertions(+), 1 deletion(-) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d3a73818e44c..7e6569e1f16f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -19,6 +19,7 @@ #include #include #include +#include #include /** @@ -1587,6 +1588,41 @@ struct cfg80211_wowlan_trig_pkt_pattern { int pkt_offset; }; +/** + * struct cfg80211_wowlan_tcp - TCP connection parameters + * + * @sock: (internal) socket for source port allocation + * @src: source IP address + * @dst: destination IP address + * @dst_mac: destination MAC address + * @src_port: source port + * @dst_port: destination port + * @payload_len: data payload length + * @payload: data payload buffer + * @payload_seq: payload sequence stamping configuration + * @data_interval: interval at which to send data packets + * @wake_len: wakeup payload match length + * @wake_data: wakeup payload match data + * @wake_mask: wakeup payload match mask + * @tokens_size: length of the tokens buffer + * @payload_tok: payload token usage configuration + */ +struct cfg80211_wowlan_tcp { + struct socket *sock; + __be32 src, dst; + u16 src_port, dst_port; + u8 dst_mac[ETH_ALEN]; + int payload_len; + const u8 *payload; + struct nl80211_wowlan_tcp_data_seq payload_seq; + u32 data_interval; + u32 wake_len; + const u8 *wake_data, *wake_mask; + u32 tokens_size; + /* must be last, variable member */ + struct nl80211_wowlan_tcp_data_token payload_tok; +}; + /** * struct cfg80211_wowlan - Wake on Wireless-LAN support info * @@ -1601,12 +1637,15 @@ struct cfg80211_wowlan_trig_pkt_pattern { * @eap_identity_req: wake up on EAP identity request packet * @four_way_handshake: wake up on 4-way handshake * @rfkill_release: wake up when rfkill is released + * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. + * NULL if not configured. */ struct cfg80211_wowlan { bool any, disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, rfkill_release; struct cfg80211_wowlan_trig_pkt_pattern *patterns; + struct cfg80211_wowlan_tcp *tcp; int n_patterns; }; @@ -1626,11 +1665,15 @@ struct cfg80211_wowlan { * frame triggers an 802.3 frame should be reported, for * disconnect due to deauth 802.11 frame. This indicates which * it is. + * @tcp_match: TCP wakeup packet received + * @tcp_connlost: TCP connection lost or failed to establish + * @tcp_nomoretokens: TCP data ran out of tokens */ struct cfg80211_wowlan_wakeup { bool disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, - rfkill_release, packet_80211; + rfkill_release, packet_80211, + tcp_match, tcp_connlost, tcp_nomoretokens; s32 pattern_idx; u32 packet_present_len, packet_len; const void *packet; @@ -2285,6 +2328,14 @@ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), }; +struct wiphy_wowlan_tcp_support { + const struct nl80211_wowlan_tcp_data_token_feature *tok; + u32 data_payload_max; + u32 data_interval_max; + u32 wake_payload_max; + bool seq; +}; + /** * struct wiphy_wowlan_support - WoWLAN support data * @flags: see &enum wiphy_wowlan_support_flags @@ -2293,6 +2344,7 @@ enum wiphy_wowlan_support_flags { * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset + * @tcp: TCP wakeup support information */ struct wiphy_wowlan_support { u32 flags; @@ -2300,6 +2352,7 @@ struct wiphy_wowlan_support { int pattern_max_len; int pattern_min_len; int max_pkt_offset; + const struct wiphy_wowlan_tcp_support *tcp; }; /** -- cgit v1.2.3 From 04f39047af2a6df64b763ea5a271db24879d0391 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 8 Feb 2013 18:16:19 +0100 Subject: nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein Signed-off-by: Simon Wunderlich [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7e6569e1f16f..ee11a3db730b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -114,6 +114,9 @@ enum ieee80211_channel_flags { #define IEEE80211_CHAN_NO_HT40 \ (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) +#define IEEE80211_DFS_MIN_CAC_TIME_MS 60000 +#define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000) + /** * struct ieee80211_channel - channel definition * @@ -134,6 +137,9 @@ enum ieee80211_channel_flags { * to enable this, this is useful only on 5 GHz band. * @orig_mag: internal use * @orig_mpwr: internal use + * @dfs_state: current state of this channel. Only relevant if radar is required + * on this channel. + * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered. */ struct ieee80211_channel { enum ieee80211_band band; @@ -146,6 +152,8 @@ struct ieee80211_channel { bool beacon_found; u32 orig_flags; int orig_mag, orig_mpwr; + enum nl80211_dfs_state dfs_state; + unsigned long dfs_state_entered; }; /** @@ -569,6 +577,7 @@ struct cfg80211_acl_data { * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control + * @radar_required: set if radar detection is required */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -586,6 +595,7 @@ struct cfg80211_ap_settings { u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; + bool radar_required; }; /** @@ -1909,6 +1919,8 @@ struct cfg80211_gtk_rekey_data { * this new list replaces the existing one. Driver has to clear its ACL * when number of MAC addresses entries is passed as 0. Drivers which * advertise the support for MAC based ACL have to implement this callback. + * + * @start_radar_detection: Start radar detection in the driver. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2132,6 +2144,10 @@ struct cfg80211_ops { int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, const struct cfg80211_acl_data *params); + + int (*start_radar_detection)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef); }; /* @@ -2715,6 +2731,8 @@ struct cfg80211_cached_keys; * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @p2p_started: true if this is a P2P Device that has been started + * @cac_started: true if DFS channel availability check has been started + * @cac_start_time: timestamp (jiffies) when the dfs state was entered. */ struct wireless_dev { struct wiphy *wiphy; @@ -2766,6 +2784,9 @@ struct wireless_dev { u32 ap_unexpected_nlportid; + bool cac_started; + unsigned long cac_start_time; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -3754,6 +3775,31 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); +/** + * cfg80211_radar_event - radar detection event + * @wiphy: the wiphy + * @chandef: chandef for the current channel + * @gfp: context flags + * + * This function is called when a radar is detected on the current chanenl. + */ +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, gfp_t gfp); + +/** + * cfg80211_cac_event - Channel availability check (CAC) event + * @netdev: network device + * @event: type of event + * @gfp: context flags + * + * This function is called when a Channel availability check (CAC) is finished + * or aborted. This must be called to notify the completion of a CAC process, + * also by full-MAC drivers. + */ +void cfg80211_cac_event(struct net_device *netdev, + enum nl80211_radar_event event, gfp_t gfp); + + /** * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer * @dev: network device -- cgit v1.2.3 From c7a6ee27abd46247c1c7edfc49fb935138da7875 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:50:39 +0100 Subject: cfg80211: allow drivers to selectively disable 80/160 MHz Some drivers might support 80 or 160 MHz only on some channels for whatever reason, so allow them to disable these channel widths. Also maintain the new flags when regulatory bandwidth limitations would disable these wide channels. Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ee11a3db730b..8a9200f2f4a4 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -100,6 +100,16 @@ enum ieee80211_band { * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. + * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, + * this flag indicates that an 80 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. + * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, + * this flag indicates that an 160 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -109,6 +119,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, IEEE80211_CHAN_NO_OFDM = 1<<6, + IEEE80211_CHAN_NO_80MHZ = 1<<7, + IEEE80211_CHAN_NO_160MHZ = 1<<8, }; #define IEEE80211_CHAN_NO_HT40 \ -- cgit v1.2.3 From a50df0c4c0d97170a6c43573612acacc43e62fe7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Feb 2013 14:20:05 +0100 Subject: cfg80211: advertise extended capabilities to userspace In many cases, userspace may need to know which of the 802.11 extended capabilities ("Extended Capabilities element") are implemented in the driver or device, to include them e.g. in beacons, assoc request/response or other frames. Add a new nl80211 attribute to hold the extended capabilities bitmap for this. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8a9200f2f4a4..a229046d86d4 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2480,6 +2480,14 @@ struct wiphy_wowlan_support { * * @max_acl_mac_addrs: Maximum number of MAC addresses that the device * supports for ACL. + * + * @extended_capabilities: extended capabilities supported by the driver, + * additional capabilities might be supported by userspace; these are + * the 802.11 extended capabilities ("Extended Capabilities element") + * and are in the same format as in the information element. See + * 802.11-2012 8.4.2.29 for the defined fields. + * @extended_capabilities_mask: mask of the valid values + * @extended_capabilities_len: length of the extended capabilities */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2546,6 +2554,9 @@ struct wiphy { */ u32 probe_resp_offload; + const u8 *extended_capabilities, *extended_capabilities_mask; + u8 extended_capabilities_len; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered -- cgit v1.2.3 From 9d62a98617298c1da288f50e84c5dd67732e79b7 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 14 Feb 2013 21:10:13 +0200 Subject: cfg80211: Pass station (extended) capability info to kernel The information of the peer's capabilities and extended capabilities are required for the driver to perform TDLS Peer UAPSD operations and off channel operations. This information of the peer is passed from user space using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass the capability information of the peer to the driver. Similarly, there may be need for capability information for other modes, so allow this to be provided with both add_station and change_station. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/net/cfg80211.h') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a229046d86d4..fa2612952c19 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -626,12 +626,14 @@ enum plink_actions { /** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) + * @STATION_PARAM_APPLY_CAPABILITY: apply new capability * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. */ enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), + STATION_PARAM_APPLY_CAPABILITY = BIT(1), }; /** @@ -662,6 +664,9 @@ enum station_parameters_apply_mask { * see &enum station_parameters_apply_mask * @local_pm: local link-specific mesh power save mode (no change when set * to unknown) + * @capability: station capability + * @ext_capab: extended capabilities of the station + * @ext_capab_len: number of extended capabilities */ struct station_parameters { u8 *supported_rates; @@ -678,6 +683,9 @@ struct station_parameters { u8 uapsd_queues; u8 max_sp; enum nl80211_mesh_power_mode local_pm; + u16 capability; + u8 *ext_capab; + u8 ext_capab_len; }; /** -- cgit v1.2.3