From 47d75f7822064d024ec9207c0fc1777f983783b7 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 11 Mar 2022 23:15:19 +0200 Subject: net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- include/net/dsa.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/net') diff --git a/include/net/dsa.h b/include/net/dsa.h index 1220af73151b..9bfe984fcdbf 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -898,6 +898,11 @@ struct dsa_switch_ops { int (*port_get_default_prio)(struct dsa_switch *ds, int port); int (*port_set_default_prio)(struct dsa_switch *ds, int port, u8 prio); + int (*port_get_dscp_prio)(struct dsa_switch *ds, int port, u8 dscp); + int (*port_add_dscp_prio)(struct dsa_switch *ds, int port, u8 dscp, + u8 prio); + int (*port_del_dscp_prio)(struct dsa_switch *ds, int port, u8 dscp, + u8 prio); /* * Suspend and resume -- cgit v1.2.3