From 35025735a79eaa894c43837b94fd33c9d6b122df Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 3 Mar 2022 15:41:18 +0000 Subject: KVM: x86/xen: Support direct injection of event channel events This adds a KVM_XEN_HVM_EVTCHN_SEND ioctl which allows direct injection of events given an explicit { vcpu, port, priority } in precisely the same form that those fields are given in the IRQ routing table. Userspace is currently able to inject 2-level events purely by setting the bits in the shared_info and vcpu_info, but FIFO event channels are harder to deal with; we will need the kernel to take sole ownership of delivery when we support those. A patch advertising this feature with a new bit in the KVM_CAP_XEN_HVM ioctl will be added in a subsequent patch. Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-9-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 91a6fe4e02c0..49cd2e9e0f6a 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1699,6 +1699,9 @@ struct kvm_xen_hvm_attr { #define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr) #define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr) +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_HVM_EVTCHN_SEND _IOW(KVMIO, 0xd0, struct kvm_irq_routing_xen_evtchn) + #define KVM_GET_SREGS2 _IOR(KVMIO, 0xcc, struct kvm_sregs2) #define KVM_SET_SREGS2 _IOW(KVMIO, 0xcd, struct kvm_sregs2) -- cgit v1.2.3 From 2fd6df2f2b47d4301b1ee0fe9d627d1c061a5988 Mon Sep 17 00:00:00 2001 From: Joao Martins Date: Thu, 3 Mar 2022 15:41:19 +0000 Subject: KVM: x86/xen: intercept EVTCHNOP_send from guests Userspace registers a sending @port to either deliver to an @eventfd or directly back to a local event channel port. After binding events the guest or host may wish to bind those events to a particular vcpu. This is usually done for unbound and and interdomain events. Update requests are handled via the KVM_XEN_EVTCHN_UPDATE flag. Unregistered ports are handled by the emulator. Co-developed-by: Ankur Arora Co-developed-By: David Woodhouse Signed-off-by: Joao Martins Signed-off-by: Ankur Arora Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-10-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 49cd2e9e0f6a..623ed2cb228f 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1686,6 +1686,32 @@ struct kvm_xen_hvm_attr { struct { __u64 gfn; } shared_info; + struct { + __u32 send_port; + __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */ + __u32 flags; +#define KVM_XEN_EVTCHN_DEASSIGN (1 << 0) +#define KVM_XEN_EVTCHN_UPDATE (1 << 1) +#define KVM_XEN_EVTCHN_RESET (1 << 2) + /* + * Events sent by the guest are either looped back to + * the guest itself (potentially on a different port#) + * or signalled via an eventfd. + */ + union { + struct { + __u32 port; + __u32 vcpu; + __u32 priority; + } port; + struct { + __u32 port; /* Zero for eventfd */ + __s32 fd; + } eventfd; + __u32 padding[4]; + } deliver; + } evtchn; + __u64 pad[8]; } u; }; @@ -1694,6 +1720,8 @@ struct kvm_xen_hvm_attr { #define KVM_XEN_ATTR_TYPE_LONG_MODE 0x0 #define KVM_XEN_ATTR_TYPE_SHARED_INFO 0x1 #define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 0x2 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_ATTR_TYPE_EVTCHN 0x3 /* Per-vCPU Xen attributes */ #define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr) -- cgit v1.2.3 From 942c2490c23f2800ad8143f5eb84a79b859aa743 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 3 Mar 2022 15:41:21 +0000 Subject: KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID In order to intercept hypercalls such as VCPUOP_set_singleshot_timer, we need to be aware of the Xen CPU numbering. This looks a lot like the Hyper-V handling of vpidx, for obvious reasons. Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-12-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 623ed2cb228f..4b65e9f0a4d9 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1747,6 +1747,7 @@ struct kvm_xen_vcpu_attr { __u64 time_blocked; __u64 time_offline; } runstate; + __u32 vcpu_id; } u; }; @@ -1757,6 +1758,8 @@ struct kvm_xen_vcpu_attr { #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT 0x3 #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA 0x4 #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 0x5 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 0x6 /* Secure Encrypted Virtualization command */ enum sev_cmd_id { -- cgit v1.2.3 From 536395260582be7443b0b35b0bbb89ffe3947f62 Mon Sep 17 00:00:00 2001 From: Joao Martins Date: Thu, 3 Mar 2022 15:41:22 +0000 Subject: KVM: x86/xen: handle PV timers oneshot mode If the guest has offloaded the timer virq, handle the following hypercalls for programming the timer: VCPUOP_set_singleshot_timer VCPUOP_stop_singleshot_timer set_timer_op(timestamp_ns) The event channel corresponding to the timer virq is then used to inject events once timer deadlines are met. For now we back the PV timer with hrtimer. [ dwmw2: Add save/restore, 32-bit compat mode, immediate delivery, don't check timer in kvm_vcpu_has_event() ] Signed-off-by: Joao Martins Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-13-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 4b65e9f0a4d9..cb223e425223 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1748,6 +1748,11 @@ struct kvm_xen_vcpu_attr { __u64 time_offline; } runstate; __u32 vcpu_id; + struct { + __u32 port; + __u32 priority; + __u64 expires_ns; + } timer; } u; }; @@ -1760,6 +1765,7 @@ struct kvm_xen_vcpu_attr { #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 0x5 /* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ #define KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 0x6 +#define KVM_XEN_VCPU_ATTR_TYPE_TIMER 0x7 /* Secure Encrypted Virtualization command */ enum sev_cmd_id { -- cgit v1.2.3 From 28d1629f751c4a5f9437fbaa0ee4ed81d1a8e587 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 3 Mar 2022 15:41:23 +0000 Subject: KVM: x86/xen: Kernel acceleration for XENVER_version Turns out this is a fast path for PV guests because they use it to trigger the event channel upcall. So letting it bounce all the way up to userspace is not great. Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-14-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index cb223e425223..4dda3896ed71 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1711,7 +1711,7 @@ struct kvm_xen_hvm_attr { __u32 padding[4]; } deliver; } evtchn; - + __u32 xen_version; __u64 pad[8]; } u; }; @@ -1722,6 +1722,7 @@ struct kvm_xen_hvm_attr { #define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 0x2 /* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ #define KVM_XEN_ATTR_TYPE_EVTCHN 0x3 +#define KVM_XEN_ATTR_TYPE_XEN_VERSION 0x4 /* Per-vCPU Xen attributes */ #define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr) -- cgit v1.2.3 From fde0451be8fb3208d4d146b8602d99ee8139e515 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 3 Mar 2022 15:41:24 +0000 Subject: KVM: x86/xen: Support per-vCPU event channel upcall via local APIC Windows uses a per-vCPU vector, and it's delivered via the local APIC basically like an MSI (with associated EOI) unlike the traditional guest-wide vector which is just magically asserted by Xen (and in the KVM case by kvm_xen_has_interrupt() / kvm_cpu_get_extint()). Now that the kernel is able to raise event channel events for itself, being able to do so for Windows guests is also going to be useful. Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-15-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 4dda3896ed71..a9ba690c4f37 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1754,6 +1754,7 @@ struct kvm_xen_vcpu_attr { __u32 priority; __u64 expires_ns; } timer; + __u8 vector; } u; }; @@ -1767,6 +1768,7 @@ struct kvm_xen_vcpu_attr { /* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ #define KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 0x6 #define KVM_XEN_VCPU_ATTR_TYPE_TIMER 0x7 +#define KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR 0x8 /* Secure Encrypted Virtualization command */ enum sev_cmd_id { -- cgit v1.2.3 From 661a20fab7d156cf6b9a407c946a1e558a633151 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 3 Mar 2022 15:41:25 +0000 Subject: KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit At the end of the patch series adding this batch of event channel acceleration features, finally add the feature bit which advertises them and document it all. For SCHEDOP_poll we need to wake a polling vCPU when a given port is triggered, even when it's masked — and we want to implement that in the kernel, for efficiency. So we want the kernel to know that it has sole ownership of event channel delivery. Thus, we allow userspace to make the 'promise' by setting the corresponding feature bit in its KVM_XEN_HVM_CONFIG call. As we implement SCHEDOP_poll bypass later, we will do so only if that promise has been made by userspace. Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-16-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index a9ba690c4f37..ee5cc9e2a837 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1232,6 +1232,7 @@ struct kvm_x86_mce { #define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) +#define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5) struct kvm_xen_hvm_config { __u32 flags; -- cgit v1.2.3 From ffbb61d09fc56c85e28b110494f3788d0ed4d1f8 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 25 Feb 2022 14:53:02 +0000 Subject: KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl. This sets the default TSC frequency for subsequently created vCPUs. Signed-off-by: David Woodhouse Message-Id: <20220225145304.36166-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index ee5cc9e2a837..8616af85dc5d 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1144,6 +1144,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_MEM_OP_EXTENSION 211 #define KVM_CAP_PMU_CAPABILITY 212 #define KVM_CAP_DISABLE_QUIRKS2 213 +#define KVM_CAP_VM_TSC_CONTROL 214 #ifdef KVM_CAP_IRQ_ROUTING @@ -1471,7 +1472,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) /* Available with KVM_CAP_PPC_GET_PVINFO */ #define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) -/* Available with KVM_CAP_TSC_CONTROL */ +/* Available with KVM_CAP_TSC_CONTROL for a vCPU, or with +* KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */ #define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) #define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) /* Available with KVM_CAP_PCI_2_3 */ -- cgit v1.2.3 From 66df0fdb5981052f3ad97c9879eda93712bdefc2 Mon Sep 17 00:00:00 2001 From: Haiyue Wang Date: Sun, 3 Apr 2022 19:53:26 +0800 Subject: bpf: Correct the comment for BTF kind bitfield The commit 8fd886911a6a ("bpf: Add BTF_KIND_FLOAT to uapi") has extended the BTF kind bitfield from 4 to 5 bits, correct the comment. Signed-off-by: Haiyue Wang Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220403115327.205964-1-haiyue.wang@intel.com --- include/uapi/linux/btf.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index b0d8fea1951d..a9162a6c0284 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -33,8 +33,8 @@ struct btf_type { /* "info" bits arrangement * bits 0-15: vlen (e.g. # of struct's members) * bits 16-23: unused - * bits 24-27: kind (e.g. int, ptr, array...etc) - * bits 28-30: unused + * bits 24-28: kind (e.g. int, ptr, array...etc) + * bits 29-30: unused * bit 31: kind_flag, currently used by * struct, union and fwd */ -- cgit v1.2.3 From 1ee375d77bb944321c969b456aa73994566cecf6 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Mon, 4 Apr 2022 10:54:47 -0700 Subject: net, uapi: remove inclusion of arpa/inet.h In include/uapi/linux/tipc_config.h, there's a comment that it includes arpa/inet.h for ntohs; but ntohs is not defined in any UAPI header. For now, reuse the definitions from include/linux/byteorder/generic.h, since the various conversion functions do exist in UAPI headers: include/uapi/linux/byteorder/big_endian.h include/uapi/linux/byteorder/little_endian.h We would like to get to the point where we can build UAPI header tests with -nostdinc, meaning that kernel UAPI headers should not have a circular dependency on libc headers. Link: https://android-review.googlesource.com/c/platform/bionic/+/2048127 Suggested-by: Jakub Kicinski Signed-off-by: Nick Desaulniers Signed-off-by: David S. Miller --- include/uapi/linux/tipc_config.h | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tipc_config.h b/include/uapi/linux/tipc_config.h index 4dfc05651c98..c00adf2fe868 100644 --- a/include/uapi/linux/tipc_config.h +++ b/include/uapi/linux/tipc_config.h @@ -43,10 +43,6 @@ #include #include -#ifndef __KERNEL__ -#include /* for ntohs etc. */ -#endif - /* * Configuration * @@ -269,33 +265,33 @@ static inline int TLV_OK(const void *tlv, __u16 space) */ return (space >= TLV_SPACE(0)) && - (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); + (__be16_to_cpu(((struct tlv_desc *)tlv)->tlv_len) <= space); } static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) { return TLV_OK(tlv, space) && - (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); + (__be16_to_cpu(((struct tlv_desc *)tlv)->tlv_type) == exp_type); } static inline int TLV_GET_LEN(struct tlv_desc *tlv) { - return ntohs(tlv->tlv_len); + return __be16_to_cpu(tlv->tlv_len); } static inline void TLV_SET_LEN(struct tlv_desc *tlv, __u16 len) { - tlv->tlv_len = htons(len); + tlv->tlv_len = __cpu_to_be16(len); } static inline int TLV_CHECK_TYPE(struct tlv_desc *tlv, __u16 type) { - return (ntohs(tlv->tlv_type) == type); + return (__be16_to_cpu(tlv->tlv_type) == type); } static inline void TLV_SET_TYPE(struct tlv_desc *tlv, __u16 type) { - tlv->tlv_type = htons(type); + tlv->tlv_type = __cpu_to_be16(type); } static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) @@ -305,8 +301,8 @@ static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) tlv_len = TLV_LENGTH(len); tlv_ptr = (struct tlv_desc *)tlv; - tlv_ptr->tlv_type = htons(type); - tlv_ptr->tlv_len = htons(tlv_len); + tlv_ptr->tlv_type = __cpu_to_be16(type); + tlv_ptr->tlv_len = __cpu_to_be16(tlv_len); if (len && data) { memcpy(TLV_DATA(tlv_ptr), data, len); memset((char *)TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len); @@ -348,7 +344,7 @@ static inline void *TLV_LIST_DATA(struct tlv_list_desc *list) static inline void TLV_LIST_STEP(struct tlv_list_desc *list) { - __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); + __u16 tlv_space = TLV_ALIGN(__be16_to_cpu(list->tlv_ptr->tlv_len)); list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); list->tlv_space -= tlv_space; @@ -404,9 +400,9 @@ static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags, msg_len = TCM_LENGTH(data_len); tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; - tcm_hdr->tcm_len = htonl(msg_len); - tcm_hdr->tcm_type = htons(cmd); - tcm_hdr->tcm_flags = htons(flags); + tcm_hdr->tcm_len = __cpu_to_be32(msg_len); + tcm_hdr->tcm_type = __cpu_to_be16(cmd); + tcm_hdr->tcm_flags = __cpu_to_be16(flags); if (data_len && data) { memcpy(TCM_DATA(msg), data, data_len); memset((char *)TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len); -- cgit v1.2.3 From 794c24e9921f32ded4422833a990ccf11dc3c00e Mon Sep 17 00:00:00 2001 From: Jeffrey Ji Date: Wed, 6 Apr 2022 17:26:00 +0000 Subject: net-core: rx_otherhost_dropped to core_stats Increment rx_otherhost_dropped counter when packet dropped due to mismatched dest MAC addr. An example when this drop can occur is when manually crafting raw packets that will be consumed by a user space application via a tap device. For testing purposes local traffic was generated using trafgen for the client and netcat to start a server Tested: Created 2 netns, sent 1 packet using trafgen from 1 to the other with "{eth(daddr=$INCORRECT_MAC...}", verified that iproute2 showed the counter was incremented. (Also had to modify iproute2 to show the stat, additional patch for that coming next.) Signed-off-by: Jeffrey Ji Reviewed-by: Brian Vazquez Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20220406172600.1141083-1-jeffreyjilinux@gmail.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/if_link.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index cc284c048e69..d1e600816b82 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -211,6 +211,9 @@ struct rtnl_link_stats { * @rx_nohandler: Number of packets received on the interface * but dropped by the networking stack because the device is * not designated to receive packets (e.g. backup link in a bond). + * + * @rx_otherhost_dropped: Number of packets dropped due to mismatch + * in destination MAC address. */ struct rtnl_link_stats64 { __u64 rx_packets; @@ -243,6 +246,8 @@ struct rtnl_link_stats64 { __u64 rx_compressed; __u64 tx_compressed; __u64 rx_nohandler; + + __u64 rx_otherhost_dropped; }; /* Subset of link stats useful for in-HW collection. Meaning of the fields is as -- cgit v1.2.3 From 2d7991fe867974a8e5065ee9691451a406b9320d Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 11 Mar 2022 16:23:22 -0700 Subject: dmaengine: idxd: update IAA definitions for user header Add additional structure definitions for Intel In-memory Analytics Accelerator (IAA/IAX). See specification (1) for more details. 1: https://cdrdv2.intel.com/v1/dl/getContent/721858 Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/164704100212.1373038.18362680016033557757.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- include/uapi/linux/idxd.h | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h index a8f0ff75c430..bce7c43657d5 100644 --- a/include/uapi/linux/idxd.h +++ b/include/uapi/linux/idxd.h @@ -53,6 +53,11 @@ enum idxd_scmd_stat { /* IAX */ #define IDXD_OP_FLAG_RD_SRC2_AECS 0x010000 +#define IDXD_OP_FLAG_RD_SRC2_2ND 0x020000 +#define IDXD_OP_FLAG_WR_SRC2_AECS_COMP 0x040000 +#define IDXD_OP_FLAG_WR_SRC2_AECS_OVFL 0x080000 +#define IDXD_OP_FLAG_SRC2_STS 0x100000 +#define IDXD_OP_FLAG_CRC_RFC3720 0x200000 /* Opcode */ enum dsa_opcode { @@ -81,6 +86,18 @@ enum iax_opcode { IAX_OPCODE_MEMMOVE, IAX_OPCODE_DECOMPRESS = 0x42, IAX_OPCODE_COMPRESS, + IAX_OPCODE_CRC64, + IAX_OPCODE_ZERO_DECOMP_32 = 0x48, + IAX_OPCODE_ZERO_DECOMP_16, + IAX_OPCODE_DECOMP_32 = 0x4c, + IAX_OPCODE_DECOMP_16, + IAX_OPCODE_SCAN = 0x50, + IAX_OPCODE_SET_MEMBER, + IAX_OPCODE_EXTRACT, + IAX_OPCODE_SELECT, + IAX_OPCODE_RLE_BURST, + IAX_OPCDE_FIND_UNIQUE, + IAX_OPCODE_EXPAND, }; /* Completion record status */ @@ -120,6 +137,7 @@ enum iax_completion_status { IAX_COMP_NONE = 0, IAX_COMP_SUCCESS, IAX_COMP_PAGE_FAULT_IR = 0x04, + IAX_COMP_ANALYTICS_ERROR = 0x0a, IAX_COMP_OUTBUF_OVERFLOW, IAX_COMP_BAD_OPCODE = 0x10, IAX_COMP_INVALID_FLAGS, @@ -140,7 +158,10 @@ enum iax_completion_status { IAX_COMP_WATCHDOG, IAX_COMP_INVALID_COMP_FLAG = 0x30, IAX_COMP_INVALID_FILTER_FLAG, - IAX_COMP_INVALID_NUM_ELEMS = 0x33, + IAX_COMP_INVALID_INPUT_SIZE, + IAX_COMP_INVALID_NUM_ELEMS, + IAX_COMP_INVALID_SRC1_WIDTH, + IAX_COMP_INVALID_INVERT_OUT, }; #define DSA_COMP_STATUS_MASK 0x7f @@ -319,8 +340,12 @@ struct iax_completion_record { uint32_t output_size; uint8_t output_bits; uint8_t rsvd3; - uint16_t rsvd4; - uint64_t rsvd5[4]; + uint16_t xor_csum; + uint32_t crc; + uint32_t min; + uint32_t max; + uint32_t sum; + uint64_t rsvd4[2]; } __attribute__((packed)); struct iax_raw_completion_record { -- cgit v1.2.3 From 545528d788556c724eeb5400757f828ef27782a8 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 13 Apr 2022 13:51:54 +0300 Subject: net: netlink: add NLM_F_BULK delete request modifier Add a new delete request modifier called NLM_F_BULK which, when supported, would cause the request to delete multiple objects. The flag is a convenient way to signal that a multiple delete operation is requested which can be gradually added to different delete requests. In order to make sure older kernels will error out if the operation is not supported instead of doing something unintended we have to break a required condition when implementing support for this flag, f.e. for neighbors we will omit the mandatory mac address attribute. Initially it will be used to add flush with filtering support for bridge fdbs, but it also opens the door to add similar support to others. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/uapi/linux/netlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index 4c0cde075c27..855dffb4c1c3 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -72,6 +72,7 @@ struct nlmsghdr { /* Modifiers to DELETE request */ #define NLM_F_NONREC 0x100 /* Do not delete recursively */ +#define NLM_F_BULK 0x200 /* Delete multiple objects */ /* Flags for ACK message */ #define NLM_F_CAPPED 0x100 /* request was capped */ -- cgit v1.2.3 From ea2c0f9e3fc2f94f090d693b7235c02af1289629 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 13 Apr 2022 13:52:00 +0300 Subject: net: rtnetlink: add ndm flags and state mask attributes Add ndm flags/state masks which will be used for bulk delete filtering. All of these are used by the bridge and vxlan drivers. Also minimal attr policy validation is added, it is up to ndo_fdb_del_bulk implementers to further validate them. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/uapi/linux/neighbour.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h index db05fb55055e..39c565e460c7 100644 --- a/include/uapi/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h @@ -32,6 +32,8 @@ enum { NDA_NH_ID, NDA_FDB_EXT_ATTRS, NDA_FLAGS_EXT, + NDA_NDM_STATE_MASK, + NDA_NDM_FLAGS_MASK, __NDA_MAX }; -- cgit v1.2.3 From c24a950ec7d60c4da91dc3f273295c7f438b531e Mon Sep 17 00:00:00 2001 From: Peter Gonda Date: Thu, 7 Apr 2022 14:02:33 -0700 Subject: KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata for SEV-ES If an SEV-ES guest requests termination, exit to userspace with KVM_EXIT_SYSTEM_EVENT and a dedicated SEV_TERM type instead of -EINVAL so that userspace can take appropriate action. See AMD's GHCB spec section '4.1.13 Termination Request' for more details. Suggested-by: Sean Christopherson Suggested-by: Paolo Bonzini Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Gonda Reported-by: kernel test robot Message-Id: <20220407210233.782250-1-pgonda@google.com> [Add documentatino. - Paolo] Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 8616af85dc5d..dd1d8167e71f 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -444,8 +444,11 @@ struct kvm_run { #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_SEV_TERM 4 +#define KVM_SYSTEM_EVENT_NDATA_VALID (1u << 31) __u32 type; - __u64 flags; + __u32 ndata; + __u64 data[16]; } system_event; /* KVM_EXIT_S390_STSI */ struct { -- cgit v1.2.3 From 4dc84c06a343fcb95fd5a0acb537aefa4ebdd1b0 Mon Sep 17 00:00:00 2001 From: Jie Wang Date: Tue, 12 Apr 2022 10:01:19 +0800 Subject: net: ethtool: extend ringparam set/get APIs for tx_push Currently tx push is a standard driver feature which controls use of a fast path descriptor push. So this patch extends the ringparam APIs and data structures to support set/get tx push by ethtool -G/g. Signed-off-by: Jie Wang Signed-off-by: Guangbin Huang Signed-off-by: Jakub Kicinski --- include/uapi/linux/ethtool_netlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 979850221b8d..d2fb4f7be61b 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -338,6 +338,7 @@ enum { ETHTOOL_A_RINGS_RX_BUF_LEN, /* u32 */ ETHTOOL_A_RINGS_TCP_DATA_SPLIT, /* u8 */ ETHTOOL_A_RINGS_CQE_SIZE, /* u32 */ + ETHTOOL_A_RINGS_TX_PUSH, /* u8 */ /* add new constants above here */ __ETHTOOL_A_RINGS_CNT, -- cgit v1.2.3 From f9a2fb73318eb4dbf8cd84866b8b0dd012d8b116 Mon Sep 17 00:00:00 2001 From: Arun Ajith S Date: Fri, 15 Apr 2022 08:34:02 +0000 Subject: net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131 Add a new neighbour cache entry in STALE state for routers on receiving an unsolicited (gratuitous) neighbour advertisement with target link-layer-address option specified. This is similar to the arp_accept configuration for IPv4. A new sysctl endpoint is created to turn on this behaviour: /proc/sys/net/ipv6/conf/interface/accept_unsolicited_na. Signed-off-by: Arun Ajith S Reviewed-by: David Ahern Signed-off-by: David S. Miller --- include/uapi/linux/ipv6.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index d4178dace0bf..549ddeaf788b 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -194,6 +194,7 @@ enum { DEVCONF_IOAM6_ID, DEVCONF_IOAM6_ID_WIDE, DEVCONF_NDISC_EVICT_NOCARRIER, + DEVCONF_ACCEPT_UNSOLICITED_NA, DEVCONF_MAX }; -- cgit v1.2.3 From c246f9b5fd617fe487f8b6f18851703f468501d6 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 18 Apr 2022 09:42:25 +0300 Subject: devlink: add support to create line card and expose to user Extend the devlink API so the driver is going to be able to create and destroy linecard instances. There can be multiple line cards per devlink device. Expose this new type of object over devlink netlink API to the userspace, with notifications. Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- include/uapi/linux/devlink.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index b897b80770f6..59c33ed2d3e7 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -131,6 +131,11 @@ enum devlink_command { DEVLINK_CMD_RATE_NEW, DEVLINK_CMD_RATE_DEL, + DEVLINK_CMD_LINECARD_GET, /* can dump */ + DEVLINK_CMD_LINECARD_SET, + DEVLINK_CMD_LINECARD_NEW, + DEVLINK_CMD_LINECARD_DEL, + /* add new commands above here */ __DEVLINK_CMD_MAX, DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1 @@ -553,6 +558,8 @@ enum devlink_attr { DEVLINK_ATTR_REGION_MAX_SNAPSHOTS, /* u32 */ + DEVLINK_ATTR_LINECARD_INDEX, /* u32 */ + /* add new attributes above here, update the policy in devlink.c */ __DEVLINK_ATTR_MAX, -- cgit v1.2.3 From fcdc8ce23a309c26a67fc613a741d9b21a248311 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 18 Apr 2022 09:42:26 +0300 Subject: devlink: implement line card provisioning In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- include/uapi/linux/devlink.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 59c33ed2d3e7..de91e4a0d476 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -343,6 +343,18 @@ enum devlink_reload_limit { #define DEVLINK_RELOAD_LIMITS_VALID_MASK (_BITUL(__DEVLINK_RELOAD_LIMIT_MAX) - 1) +enum devlink_linecard_state { + DEVLINK_LINECARD_STATE_UNSPEC, + DEVLINK_LINECARD_STATE_UNPROVISIONED, + DEVLINK_LINECARD_STATE_UNPROVISIONING, + DEVLINK_LINECARD_STATE_PROVISIONING, + DEVLINK_LINECARD_STATE_PROVISIONING_FAILED, + DEVLINK_LINECARD_STATE_PROVISIONED, + + __DEVLINK_LINECARD_STATE_MAX, + DEVLINK_LINECARD_STATE_MAX = __DEVLINK_LINECARD_STATE_MAX - 1 +}; + enum devlink_attr { /* don't change the order or add anything between, this is ABI! */ DEVLINK_ATTR_UNSPEC, @@ -559,6 +571,9 @@ enum devlink_attr { DEVLINK_ATTR_REGION_MAX_SNAPSHOTS, /* u32 */ DEVLINK_ATTR_LINECARD_INDEX, /* u32 */ + DEVLINK_ATTR_LINECARD_STATE, /* u8 */ + DEVLINK_ATTR_LINECARD_TYPE, /* string */ + DEVLINK_ATTR_LINECARD_SUPPORTED_TYPES, /* nested */ /* add new attributes above here, update the policy in devlink.c */ -- cgit v1.2.3 From fc9f50d5b366cd9f35bdee22fe3f8d77833cb1d8 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 18 Apr 2022 09:42:27 +0300 Subject: devlink: implement line card active state Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- include/uapi/linux/devlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index de91e4a0d476..b3d40a5d72ff 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -350,6 +350,7 @@ enum devlink_linecard_state { DEVLINK_LINECARD_STATE_PROVISIONING, DEVLINK_LINECARD_STATE_PROVISIONING_FAILED, DEVLINK_LINECARD_STATE_PROVISIONED, + DEVLINK_LINECARD_STATE_ACTIVE, __DEVLINK_LINECARD_STATE_MAX, DEVLINK_LINECARD_STATE_MAX = __DEVLINK_LINECARD_STATE_MAX - 1 -- cgit v1.2.3 From 38a6f0865796e26fc38fff4858f681d9ae76fa0f Mon Sep 17 00:00:00 2001 From: Tonghao Zhang Date: Sat, 16 Apr 2022 00:40:46 +0800 Subject: net: sched: support hash selecting tx queue This patch allows users to pick queue_mapping, range from A to B. Then we can load balance packets from A to B tx queue. The range is an unsigned 16bit value in decimal format. $ tc filter ... action skbedit queue_mapping skbhash A B "skbedit queue_mapping QUEUE_MAPPING" (from "man 8 tc-skbedit") is enhanced with flags: SKBEDIT_F_TXQ_SKBHASH +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | qn | qm v v v HTB/FQ FIFO ... FIFO For example: If P1 sends out packets to different Pods on other host, and we want distribute flows from qn - qm. Then we can use skb->hash as hash. setup commands: $ NETDEV=eth0 $ ip netns add n1 $ ip link add ipv1 link $NETDEV type ipvlan mode l2 $ ip link set ipv1 netns n1 $ ip netns exec n1 ifconfig ipv1 2.2.2.100/24 up $ tc qdisc add dev $NETDEV clsact $ tc filter add dev $NETDEV egress protocol ip prio 1 \ flower skip_hw src_ip 2.2.2.100 action skbedit queue_mapping skbhash 2 6 $ tc qdisc add dev $NETDEV handle 1: root mq $ tc qdisc add dev $NETDEV parent 1:1 handle 2: htb $ tc class add dev $NETDEV parent 2: classid 2:1 htb rate 100kbit $ tc class add dev $NETDEV parent 2: classid 2:2 htb rate 200kbit $ tc qdisc add dev $NETDEV parent 1:2 tbf rate 100mbit burst 100mb latency 1 $ tc qdisc add dev $NETDEV parent 1:3 pfifo $ tc qdisc add dev $NETDEV parent 1:4 pfifo $ tc qdisc add dev $NETDEV parent 1:5 pfifo $ tc qdisc add dev $NETDEV parent 1:6 pfifo $ tc qdisc add dev $NETDEV parent 1:7 pfifo $ ip netns exec n1 iperf3 -c 2.2.2.1 -i 1 -t 10 -P 10 pick txqueue from 2 - 6: $ ethtool -S $NETDEV | grep -i tx_queue_[0-9]_bytes tx_queue_0_bytes: 42 tx_queue_1_bytes: 0 tx_queue_2_bytes: 11442586444 tx_queue_3_bytes: 7383615334 tx_queue_4_bytes: 3981365579 tx_queue_5_bytes: 3983235051 tx_queue_6_bytes: 6706236461 tx_queue_7_bytes: 42 tx_queue_8_bytes: 0 tx_queue_9_bytes: 0 txqueues 2 - 6 are mapped to classid 1:3 - 1:7 $ tc -s class show dev $NETDEV ... class mq 1:3 root leaf 8002: Sent 11949133672 bytes 7929798 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:4 root leaf 8003: Sent 7710449050 bytes 5117279 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:5 root leaf 8004: Sent 4157648675 bytes 2758990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:6 root leaf 8005: Sent 4159632195 bytes 2759990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:7 root leaf 8006: Sent 7003169603 bytes 4646912 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... Cc: Jamal Hadi Salim Cc: Cong Wang Cc: Jiri Pirko Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Jonathan Lemon Cc: Eric Dumazet Cc: Alexander Lobakin Cc: Paolo Abeni Cc: Talal Ahmad Cc: Kevin Hao Cc: Ilias Apalodimas Cc: Kees Cook Cc: Kumar Kartikeya Dwivedi Cc: Antoine Tenart Cc: Wei Wang Cc: Arnd Bergmann Signed-off-by: Tonghao Zhang Reviewed-by: Jamal Hadi Salim Signed-off-by: Paolo Abeni --- include/uapi/linux/tc_act/tc_skbedit.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tc_act/tc_skbedit.h b/include/uapi/linux/tc_act/tc_skbedit.h index 800e93377218..6cb6101208d0 100644 --- a/include/uapi/linux/tc_act/tc_skbedit.h +++ b/include/uapi/linux/tc_act/tc_skbedit.h @@ -29,6 +29,7 @@ #define SKBEDIT_F_PTYPE 0x8 #define SKBEDIT_F_MASK 0x10 #define SKBEDIT_F_INHERITDSFIELD 0x20 +#define SKBEDIT_F_TXQ_SKBHASH 0x40 struct tc_skbedit { tc_gen; @@ -45,6 +46,7 @@ enum { TCA_SKBEDIT_PTYPE, TCA_SKBEDIT_MASK, TCA_SKBEDIT_FLAGS, + TCA_SKBEDIT_QUEUE_MAPPING_MAX, __TCA_SKBEDIT_MAX }; #define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1) -- cgit v1.2.3 From b4000312822615ba2222e368188029e9b725dbf4 Mon Sep 17 00:00:00 2001 From: Boris Sukholitko Date: Tue, 19 Apr 2022 11:14:33 +0300 Subject: net/sched: flower: Add number of vlan tags filter These are bookkeeping parts of the new num_of_vlans filter. Defines, dump, load and set are being done here. Signed-off-by: Boris Sukholitko Signed-off-by: David S. Miller --- include/uapi/linux/pkt_cls.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 404f97fb239c..9a2ee1e39fad 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -587,6 +587,8 @@ enum { TCA_FLOWER_KEY_HASH, /* u32 */ TCA_FLOWER_KEY_HASH_MASK, /* u32 */ + TCA_FLOWER_KEY_NUM_OF_VLANS, /* u8 */ + __TCA_FLOWER_MAX, }; -- cgit v1.2.3 From 26f89535a5bb17915a2e1062c3999a2ee797c7b0 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Wed, 13 Apr 2022 22:12:46 -0700 Subject: cxl/mbox: Use type __u32 for mailbox payload sizes Payload sizes for mailbox commands are expected to be positive values coming from userspace. The documentation correctly describes these as always unsigned values. The mailbox and send structures that support the mailbox commands however, use __s32 types for the payloads. Replace __s32 with __u32 in the mailbox and send command structures and update usages. Kernel users of the interface already block all negative values and there is no known ability for userspace to have grown a dependency on submitting negative values to the kernel. The known user of the IOCTL, the CXL command line interface (cxl-cli) already enforces positive size values. A Smatch warning of a signedness uncovered this issue. Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Alison Schofield Link: https://lore.kernel.org/r/20220414051246.1244575-1-alison.schofield@intel.com Signed-off-by: Dan Williams --- include/uapi/linux/cxl_mem.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h index 8d206f27bb6d..c71021a2a9ed 100644 --- a/include/uapi/linux/cxl_mem.h +++ b/include/uapi/linux/cxl_mem.h @@ -68,8 +68,8 @@ static const struct { * struct cxl_command_info - Command information returned from a query. * @id: ID number for the command. * @flags: Flags that specify command behavior. - * @size_in: Expected input size, or -1 if variable length. - * @size_out: Expected output size, or -1 if variable length. + * @size_in: Expected input size, or ~0 if variable length. + * @size_out: Expected output size, or ~0 if variable length. * * Represents a single command that is supported by both the driver and the * hardware. This is returned as part of an array from the query ioctl. The @@ -78,7 +78,7 @@ static const struct { * * - @id = 10 * - @flags = 0 - * - @size_in = -1 + * - @size_in = ~0 * - @size_out = 0 * * See struct cxl_mem_query_commands. @@ -89,8 +89,8 @@ struct cxl_command_info { __u32 flags; #define CXL_MEM_COMMAND_FLAG_MASK GENMASK(0, 0) - __s32 size_in; - __s32 size_out; + __u32 size_in; + __u32 size_out; }; /** @@ -169,13 +169,13 @@ struct cxl_send_command { __u32 retval; struct { - __s32 size; + __u32 size; __u32 rsvd; __u64 payload; } in; struct { - __s32 size; + __u32 size; __u32 rsvd; __u64 payload; } out; -- cgit v1.2.3 From 8d92e4fbcf0fb7ecb24223b7b1ce95b9beb4dfa2 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 25 Apr 2022 06:44:21 +0300 Subject: devlink: introduce line card devices support Line card can contain one or more devices that makes sense to make visible to the user. For example, this can be a gearbox with flash memory, which could be updated. Provide the driver possibility to attach such devices to a line card and expose those to user. Example: $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G devices: device 0 device 1 device 2 device 3 Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- include/uapi/linux/devlink.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index b3d40a5d72ff..cd578645f94f 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -575,6 +575,9 @@ enum devlink_attr { DEVLINK_ATTR_LINECARD_STATE, /* u8 */ DEVLINK_ATTR_LINECARD_TYPE, /* string */ DEVLINK_ATTR_LINECARD_SUPPORTED_TYPES, /* nested */ + DEVLINK_ATTR_LINECARD_DEVICE_LIST, /* nested */ + DEVLINK_ATTR_LINECARD_DEVICE, /* nested */ + DEVLINK_ATTR_LINECARD_DEVICE_INDEX, /* u32 */ /* add new attributes above here, update the policy in devlink.c */ -- cgit v1.2.3 From 276910aecc6a4076f5fbfd8160ff70695d6c1eb5 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 25 Apr 2022 06:44:22 +0300 Subject: devlink: introduce line card info get message Allow the driver to provide per line card info get op to fill-up info, similar to the "devlink dev info". Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- include/uapi/linux/devlink.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index cd578645f94f..fb8c3864457f 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -136,6 +136,8 @@ enum devlink_command { DEVLINK_CMD_LINECARD_NEW, DEVLINK_CMD_LINECARD_DEL, + DEVLINK_CMD_LINECARD_INFO_GET, /* can dump */ + /* add new commands above here */ __DEVLINK_CMD_MAX, DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1 -- cgit v1.2.3 From e8e7fbb6a39cd6761c843d97851eb40c5885e922 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 12 Apr 2022 11:49:43 +0200 Subject: PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add macro defining Auto Slot Power Limit Disable bit in Slot Control Register. Link: https://lore.kernel.org/r/20220412094946.27069-2-pali@kernel.org Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Lorenzo Pieralisi Acked-by: Bjorn Helgaas --- include/uapi/linux/pci_regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index bee1a9ed6e66..108f8523fa04 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -616,6 +616,7 @@ #define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */ #define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ #define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ +#define PCI_EXP_SLTCTL_ASPL_DISABLE 0x2000 /* Auto Slot Power Limit Disable */ #define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */ #define PCI_EXP_SLTSTA 0x1a /* Slot Status */ #define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ -- cgit v1.2.3 From 7d5e005d982527e4029b0139823d179986e34cdc Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Fri, 22 Apr 2022 15:03:25 +0300 Subject: fanotify: implement "evictable" inode marks When an inode mark is created with flag FAN_MARK_EVICTABLE, it will not pin the marked inode to inode cache, so when inode is evicted from cache due to memory pressure, the mark will be lost. When an inode mark with flag FAN_MARK_EVICATBLE is updated without using this flag, the marked inode is pinned to inode cache. When an inode mark is updated with flag FAN_MARK_EVICTABLE but an existing mark already has the inode pinned, the mark update fails with error EEXIST. Evictable inode marks can be used to setup inode marks with ignored mask to suppress events from uninteresting files or directories in a lazy manner, upon receiving the first event, without having to iterate all the uninteresting files or directories before hand. The evictbale inode mark feature allows performing this lazy marks setup without exhausting the system memory with pinned inodes. This change does not enable the feature yet. Link: https://lore.kernel.org/linux-fsdevel/CAOQ4uxiRDpuS=2uA6+ZUM7yG9vVU-u212tkunBmSnP_u=mkv=Q@mail.gmail.com/ Link: https://lore.kernel.org/r/20220422120327.3459282-15-amir73il@gmail.com Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara --- include/uapi/linux/fanotify.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fanotify.h b/include/uapi/linux/fanotify.h index e8ac38cc2fd6..f1f89132d60e 100644 --- a/include/uapi/linux/fanotify.h +++ b/include/uapi/linux/fanotify.h @@ -82,6 +82,7 @@ #define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040 #define FAN_MARK_FLUSH 0x00000080 /* FAN_MARK_FILESYSTEM is 0x00000100 */ +#define FAN_MARK_EVICTABLE 0x00000200 /* These are NOT bitwise flags. Both bits can be used togther. */ #define FAN_MARK_INODE 0x00000000 -- cgit v1.2.3 From c0a5a21c25f37c9fd7b36072f9968cdff1e4aa13 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Mon, 25 Apr 2022 03:18:51 +0530 Subject: bpf: Allow storing referenced kptr in map Extending the code in previous commits, introduce referenced kptr support, which needs to be tagged using 'kptr_ref' tag instead. Unlike unreferenced kptr, referenced kptr have a lot more restrictions. In addition to the type matching, only a newly introduced bpf_kptr_xchg helper is allowed to modify the map value at that offset. This transfers the referenced pointer being stored into the map, releasing the references state for the program, and returning the old value and creating new reference state for the returned pointer. Similar to unreferenced pointer case, return value for this case will also be PTR_TO_BTF_ID_OR_NULL. The reference for the returned pointer must either be eventually released by calling the corresponding release function, otherwise it must be transferred into another map. It is also allowed to call bpf_kptr_xchg with a NULL pointer, to clear the value, and obtain the old value if any. BPF_LDX, BPF_STX, and BPF_ST cannot access referenced kptr. A future commit will permit using BPF_LDX for such pointers, but attempt at making it safe, since the lifetime of object won't be guaranteed. There are valid reasons to enforce the restriction of permitting only bpf_kptr_xchg to operate on referenced kptr. The pointer value must be consistent in face of concurrent modification, and any prior values contained in the map must also be released before a new one is moved into the map. To ensure proper transfer of this ownership, bpf_kptr_xchg returns the old value, which the verifier would require the user to either free or move into another map, and releases the reference held for the pointer being moved in. In the future, direct BPF_XCHG instruction may also be permitted to work like bpf_kptr_xchg helper. Note that process_kptr_func doesn't have to call check_helper_mem_access, since we already disallow rdonly/wronly flags for map, which is what check_map_access_type checks, and we already ensure the PTR_TO_MAP_VALUE refers to kptr by obtaining its off_desc, so check_map_access is also not required. Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220424214901.2743946-4-memxor@gmail.com --- include/uapi/linux/bpf.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index d14b10b85e51..444fe6f1cf35 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5143,6 +5143,17 @@ union bpf_attr { * The **hash_algo** is returned on success, * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if * invalid arguments are passed. + * + * void *bpf_kptr_xchg(void *map_value, void *ptr) + * Description + * Exchange kptr at pointer *map_value* with *ptr*, and return the + * old value. *ptr* can be NULL, otherwise it must be a referenced + * pointer which will be released when this helper is called. + * Return + * The old value of kptr (which can be NULL). The returned pointer + * if not NULL, is a reference which must be released using its + * corresponding release function, or moved into a BPF map before + * program exit. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5339,6 +5350,7 @@ union bpf_attr { FN(copy_from_user_task), \ FN(skb_set_tstamp), \ FN(ima_file_hash), \ + FN(kptr_xchg), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper -- cgit v1.2.3 From d8fc1c7c4c9b705ce5f5bba772ad66a0137c685d Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Mon, 25 Apr 2022 09:16:17 -0500 Subject: tee: remove flags TEE_IOCTL_SHM_MAPPED and TEE_IOCTL_SHM_DMA_BUF These look to be leftover from an early edition of this driver. Userspace does not need this information. Checking all users of this that I have access to I have verified no one is using them. They leak internal use flags out to userspace. Even more they are not correct anymore after a45ea4efa358. Lets drop these flags before someone does try to use them for something and they become ABI. Signed-off-by: Andrew Davis Acked-by: Sumit Garg Signed-off-by: Jens Wiklander --- include/uapi/linux/tee.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index 25a6c534beb1..23e57164693c 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -42,10 +42,6 @@ #define TEE_IOC_MAGIC 0xa4 #define TEE_IOC_BASE 0 -/* Flags relating to shared memory */ -#define TEE_IOCTL_SHM_MAPPED 0x1 /* memory mapped in normal world */ -#define TEE_IOCTL_SHM_DMA_BUF 0x2 /* dma-buf handle on shared memory */ - #define TEE_MAX_ARG_SIZE 1024 #define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */ -- cgit v1.2.3 From 052e1f01bfae8be6f31b61ed3a2356edfca855dc Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 26 Apr 2022 10:54:33 -0700 Subject: net: atm: remove support for ZeitNet ZN122x ATM devices This driver received nothing but automated fixes in the last 15 years. Since it's using virt_to_bus it's unlikely to be used on any modern platform. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- include/uapi/linux/atm_zatm.h | 47 ------------------------------------------- 1 file changed, 47 deletions(-) delete mode 100644 include/uapi/linux/atm_zatm.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h deleted file mode 100644 index 5135027b93c1..000000000000 --- a/include/uapi/linux/atm_zatm.h +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by - driver-specific utilities) */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ZATM_H -#define LINUX_ATM_ZATM_H - -/* - * Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include -#include - -#define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define ZATM_GETPOOLZ _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* get statistics and zero */ -#define ZATM_SETPOOL _IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc) - /* set pool parameters */ - -struct zatm_pool_info { - int ref_count; /* free buffer pool usage counters */ - int low_water,high_water; /* refill parameters */ - int rqa_count,rqu_count; /* queue condition counters */ - int offset,next_off; /* alignment optimizations: offset */ - int next_cnt,next_thres; /* repetition counter and threshold */ -}; - -struct zatm_pool_req { - int pool_num; /* pool number */ - struct zatm_pool_info info; /* actual information */ -}; - -#define ZATM_OAM_POOL 0 /* free buffer pool for OAM cells */ -#define ZATM_AAL0_POOL 1 /* free buffer pool for AAL0 cells */ -#define ZATM_AAL5_POOL_BASE 2 /* first AAL5 free buffer pool */ -#define ZATM_LAST_POOL ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */ - -#define ZATM_TIMER_HISTORY_SIZE 16 /* number of timer adjustments to - record; must be 2^n */ - -#endif -- cgit v1.2.3 From 0e0af57e0e91b304f36b7d1dba859e3c04094273 Mon Sep 17 00:00:00 2001 From: "Dr. Thomas Orgis" Date: Fri, 29 Apr 2022 14:38:03 -0700 Subject: taskstats: version 12 with thread group and exe info The task exit struct needs some crucial information to be able to provide an enhanced version of process and thread accounting. This change provides: 1. ac_tgid in additon to ac_pid 2. thread group execution walltime in ac_tgetime 3. flag AGROUP in ac_flag to indicate the last task in a thread group / process 4. device ID and inode of task's /proc/self/exe in ac_exe_dev and ac_exe_inode 5. tools/accounting/procacct as demonstrator When a task exits, taskstats are reported to userspace including the task's pid and ppid, but without the id of the thread group this task is part of. Without the tgid, the stats of single tasks cannot be correlated to each other as a thread group (process). The taskstats documentation suggests that on process exit a data set consisting of accumulated stats for the whole group is produced. But such an additional set of stats is only produced for actually multithreaded processes, not groups that had only one thread, and also those stats only contain data about delay accounting and not the more basic information about CPU and memory resource usage. Adding the AGROUP flag to be set when the last task of a group exited enables determination of process end also for single-threaded processes. My applicaton basically does enhanced process accounting with summed cputime, biggest maxrss, tasks per process. The data is not available with the traditional BSD process accounting (which is not designed to be extensible) and the taskstats interface allows more efficient on-the-fly grouping and summing of the stats, anyway, without intermediate disk writes. Furthermore, I do carry statistics on which exact program binary is used how often with associated resources, getting a picture on how important which parts of a collection of installed scientific software in different versions are, and how well they put load on the machine. This is enabled by providing information on /proc/self/exe for each task. I assume the two 64-bit fields for device ID and inode are more appropriate than the possibly large resolved path to keep the data volume down. Add the tgid to the stats to complete task identification, the flag AGROUP to mark the last task of a group, the group wallclock time, and inode-based identification of the associated executable file. Add tools/accounting/procacct.c as a simplified fork of getdelays.c to demonstrate process and thread accounting. [thomas.orgis@uni-hamburg.de: fix version number in comment] Link: https://lkml.kernel.org/r/20220405003601.7a5f6008@plasteblaster Link: https://lkml.kernel.org/r/20220331004106.64e5616b@plasteblaster Signed-off-by: Dr. Thomas Orgis Reviewed-by: Ismael Luceno Cc: Balbir Singh Cc: Eric W. Biederman Cc: xu xin Cc: Yang Yang Signed-off-by: Andrew Morton --- include/uapi/linux/acct.h | 3 ++- include/uapi/linux/taskstats.h | 24 +++++++++++++++++++++--- 2 files changed, 23 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h index 985b89068591..0e591152aa8a 100644 --- a/include/uapi/linux/acct.h +++ b/include/uapi/linux/acct.h @@ -103,12 +103,13 @@ struct acct_v3 /* * accounting flags */ - /* bit set when the process ... */ + /* bit set when the process/task ... */ #define AFORK 0x01 /* ... executed fork, but did not exec */ #define ASU 0x02 /* ... used super-user privileges */ #define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */ #define ACORE 0x08 /* ... dumped core */ #define AXSIG 0x10 /* ... was killed by a signal */ +#define AGROUP 0x20 /* ... was the last task of the process (task group) */ #if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) #define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ diff --git a/include/uapi/linux/taskstats.h b/include/uapi/linux/taskstats.h index 12327d32378f..736154171489 100644 --- a/include/uapi/linux/taskstats.h +++ b/include/uapi/linux/taskstats.h @@ -34,7 +34,7 @@ */ -#define TASKSTATS_VERSION 11 +#define TASKSTATS_VERSION 12 #define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN * in linux/sched.h */ @@ -48,7 +48,8 @@ struct taskstats { __u32 ac_exitcode; /* Exit status */ /* The accounting flags of a task as defined in - * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG. + * Defined values are AFORK, ASU, ACOMPAT, ACORE, AXSIG, and AGROUP. + * (AGROUP since version 12). */ __u8 ac_flag; /* Record flags */ __u8 ac_nice; /* task_nice */ @@ -173,9 +174,26 @@ struct taskstats { /* v10: 64-bit btime to avoid overflow */ __u64 ac_btime64; /* 64-bit begin time */ - /* Delay waiting for memory compact */ + /* v11: Delay waiting for memory compact */ __u64 compact_count; __u64 compact_delay_total; + + /* v12 begin */ + __u32 ac_tgid; /* thread group ID */ + /* Thread group walltime up to now. This is total process walltime if + * AGROUP flag is set. + */ + __u64 ac_tgetime __attribute__((aligned(8))); + /* Lightweight information to identify process binary files. + * This leaves userspace to match this to a file system path, using + * MAJOR() and MINOR() macros to identify a device and mount point, + * the inode to identify the executable file. This is /proc/self/exe + * at the end, so matching the most recent exec(). Values are zero + * for kernel threads. + */ + __u64 ac_exe_dev; /* program binary device ID */ + __u64 ac_exe_inode; /* program binary inode number */ + /* v12 end */ }; -- cgit v1.2.3 From 3254e0b9eb5649ffaa48717ebc9c593adc4ee6a9 Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Fri, 29 Apr 2022 18:34:31 +0300 Subject: ethtool: Add 10base-T1L link mode entry Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn Reviewed-by: Oleksij Rempel Signed-off-by: Alexandru Tachici Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 7bc4b8def12c..e0f0ee9bc89e 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1691,6 +1691,7 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89, ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90, ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91, + ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 92, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS }; -- cgit v1.2.3 From 909b4f2bf764a903e9183111368f1509f9b40e6d Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Fri, 29 Apr 2022 18:34:32 +0300 Subject: net: phy: Add 10-BaseT1L registers The 802.3gc specification defines the 10-BaseT1L link mode for ethernet trafic on twisted wire pair. PMA status register can be used to detect if the phy supports 2.4 V TX level and PCS control register can be used to enable/disable PCS level loopback. Reviewed-by: Andrew Lunn Signed-off-by: Alexandru Tachici Signed-off-by: David S. Miller --- include/uapi/linux/mdio.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index c54e6eae5366..0b2eba36dd7c 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -67,6 +67,9 @@ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ +#define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */ +#define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */ +#define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -268,6 +271,28 @@ #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ +/* 10BASE-T1L PMA control */ +#define MDIO_PMA_10T1L_CTRL_LB_EN 0x0001 /* Enable loopback mode */ +#define MDIO_PMA_10T1L_CTRL_EEE_EN 0x0400 /* Enable EEE mode */ +#define MDIO_PMA_10T1L_CTRL_LOW_POWER 0x0800 /* Low-power mode */ +#define MDIO_PMA_10T1L_CTRL_2V4_EN 0x1000 /* Enable 2.4 Vpp operating mode */ +#define MDIO_PMA_10T1L_CTRL_TX_DIS 0x4000 /* Transmit disable */ +#define MDIO_PMA_10T1L_CTRL_PMA_RST 0x8000 /* MA reset */ + +/* 10BASE-T1L PMA status register. */ +#define MDIO_PMA_10T1L_STAT_LINK 0x0001 /* PMA receive link up */ +#define MDIO_PMA_10T1L_STAT_FAULT 0x0002 /* Fault condition detected */ +#define MDIO_PMA_10T1L_STAT_POLARITY 0x0004 /* Receive polarity is reversed */ +#define MDIO_PMA_10T1L_STAT_RECV_FAULT 0x0200 /* Able to detect fault on receive path */ +#define MDIO_PMA_10T1L_STAT_EEE 0x0400 /* PHY has EEE ability */ +#define MDIO_PMA_10T1L_STAT_LOW_POWER 0x0800 /* PMA has low-power ability */ +#define MDIO_PMA_10T1L_STAT_2V4_ABLE 0x1000 /* PHY has 2.4 Vpp operating mode ability */ +#define MDIO_PMA_10T1L_STAT_LB_ABLE 0x2000 /* PHY has loopback ability */ + +/* 10BASE-T1L PCS control register. */ +#define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */ +#define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ + /* EEE Supported/Advertisement/LP Advertisement registers. * * EEE capability Register (3.20), Advertisement (7.60) and -- cgit v1.2.3 From 1b020e448e0fb67bcb04ee0f778d413045f965d3 Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Fri, 29 Apr 2022 18:34:33 +0300 Subject: net: phy: Add BaseT1 auto-negotiation registers Added BASE-T1 AN advertisement register (Registers 7.514, 7.515, and 7.516) and BASE-T1 AN LP Base Page ability register (Registers 7.517, 7.518, and 7.519). Reviewed-by: Andrew Lunn Signed-off-by: Alexandru Tachici Signed-off-by: David S. Miller --- include/uapi/linux/mdio.h | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index 0b2eba36dd7c..fa3515257f54 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -70,6 +70,14 @@ #define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */ #define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */ #define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */ +#define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */ +#define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */ +#define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_M 515 /* BASE-T1 AN advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_H 516 /* BASE-T1 AN advertisement register [47:32] */ +#define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP Base Page ability register [15:0] */ +#define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP Base Page ability register [31:16] */ +#define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP Base Page ability register [47:32] */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -293,6 +301,38 @@ #define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */ #define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ +/* BASE-T1 auto-negotiation advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP +#define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM +#define MDIO_AN_T1_ADV_L_FORCE_MS 0x1000 /* Force Master/slave Configuration */ +#define MDIO_AN_T1_ADV_L_REMOTE_FAULT ADVERTISE_RFAULT +#define MDIO_AN_T1_ADV_L_ACK ADVERTISE_LPACK +#define MDIO_AN_T1_ADV_L_NEXT_PAGE_REQ ADVERTISE_NPAGE + +/* BASE-T1 auto-negotiation advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_M_B10L 0x4000 /* device is compatible with 10BASE-T1L */ +#define MDIO_AN_T1_ADV_M_MST 0x0010 /* advertise master preference */ + +/* BASE-T1 auto-negotiation advertisement register [47:32] */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level Transmit Request */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level Transmit Ability */ + +/* BASE-T1 AN LP Base Page ability register [15:0] */ +#define MDIO_AN_T1_LP_L_PAUSE_CAP LPA_PAUSE_CAP +#define MDIO_AN_T1_LP_L_PAUSE_ASYM LPA_PAUSE_ASYM +#define MDIO_AN_T1_LP_L_FORCE_MS 0x1000 /* LP Force Master/slave Configuration */ +#define MDIO_AN_T1_LP_L_REMOTE_FAULT LPA_RFAULT +#define MDIO_AN_T1_LP_L_ACK LPA_LPACK +#define MDIO_AN_T1_LP_L_NEXT_PAGE_REQ LPA_NPAGE + +/* BASE-T1 AN LP Base Page ability register [31:16] */ +#define MDIO_AN_T1_LP_M_MST 0x0010 /* LP master preference */ +#define MDIO_AN_T1_LP_M_B10L 0x4000 /* LP is compatible with 10BASE-T1L */ + +/* BASE-T1 AN LP Base Page ability register [47:32] */ +#define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */ +#define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */ + /* EEE Supported/Advertisement/LP Advertisement registers. * * EEE capability Register (3.20), Advertisement (7.60) and -- cgit v1.2.3 From 3da8ffd8545f62fec85a48a3c637b2f427974f11 Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Fri, 29 Apr 2022 18:34:34 +0300 Subject: net: phy: Add 10BASE-T1L support in phy-c45 This patch is needed because the BASE-T1 uses different registers for status, control and advertisement to those already employed in the existing phy-c45 functions. Where required, genphy_c45 functions will now check whether the device supports BASE-T1 and use the specific registers instead: 45.2.7.19 BASE-T1 AN control register, 45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN advertisement register, 45.2.7.22 BASE-T1 AN LP Base Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control register. Tested-by: Oleksij Rempel Signed-off-by: Alexandru Tachici Signed-off-by: David S. Miller --- include/uapi/linux/mdio.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index fa3515257f54..75b7257a51e1 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -70,6 +70,7 @@ #define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */ #define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */ #define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */ +#define MDIO_PMA_PMD_BT1 18 /* BASE-T1 PMA/PMD extended ability */ #define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */ #define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */ #define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */ @@ -78,6 +79,7 @@ #define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP Base Page ability register [15:0] */ #define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP Base Page ability register [31:16] */ #define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP Base Page ability register [47:32] */ +#define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -170,6 +172,7 @@ #define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ #define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */ #define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */ +#define MDIO_PMA_CTRL2_BASET1 0x003D /* BASE-T1 type */ #define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ #define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ #define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ @@ -223,6 +226,7 @@ #define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ #define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ #define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ +#define MDIO_PMA_EXTABLE_BT1 0x0800 /* BASE-T1 ability */ #define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */ /* PHY XGXS lane state register. */ @@ -301,6 +305,9 @@ #define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */ #define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ +/* BASE-T1 PMA/PMD extended ability register. */ +#define MDIO_PMA_PMD_BT1_B10L_ABLE 0x0004 /* 10BASE-T1L Ability */ + /* BASE-T1 auto-negotiation advertisement register [15:0] */ #define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP #define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM @@ -333,6 +340,9 @@ #define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */ #define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */ +/* BASE-T1 PMA/PMD control register */ +#define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */ + /* EEE Supported/Advertisement/LP Advertisement registers. * * EEE capability Register (3.20), Advertisement (7.60) and -- cgit v1.2.3 From 41b3c69bf9414375319290c59f198ff5c71d273f Mon Sep 17 00:00:00 2001 From: Kishen Maloor Date: Mon, 2 May 2022 13:52:36 -0700 Subject: mptcp: expose server_side attribute in MPTCP netlink events This change records the 'server_side' attribute of MPTCP_EVENT_CREATED and MPTCP_EVENT_ESTABLISHED events to inform their recipient about the Client/Server role of the running MPTCP application. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/246 Acked-by: Paolo Abeni Signed-off-by: Kishen Maloor Signed-off-by: Mat Martineau Signed-off-by: Jakub Kicinski --- include/uapi/linux/mptcp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index 9690efedb5fa..e41ea01a94bb 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -188,6 +188,7 @@ enum mptcp_event_attr { MPTCP_ATTR_IF_IDX, /* s32 */ MPTCP_ATTR_RESET_REASON,/* u32 */ MPTCP_ATTR_RESET_FLAGS, /* u32 */ + MPTCP_ATTR_SERVER_SIDE, /* u8 */ __MPTCP_ATTR_AFTER_LAST }; -- cgit v1.2.3 From 7b33a09d036ffd9a04506122840629c7e870cf08 Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Wed, 4 May 2022 03:24:40 +0000 Subject: KVM: arm64: Add support for userspace to suspend a vCPU Introduce a new MP state, KVM_MP_STATE_SUSPENDED, which indicates a vCPU is in a suspended state. In the suspended state the vCPU will block until a wakeup event (pending interrupt) is recognized. Add a new system event type, KVM_SYSTEM_EVENT_WAKEUP, to indicate to userspace that KVM has recognized one such wakeup event. It is the responsibility of userspace to then make the vCPU runnable, or leave it suspended until the next wakeup event. Signed-off-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20220504032446.4133305-7-oupton@google.com --- include/uapi/linux/kvm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 6a184d260c7f..7f72fb7b05f2 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -444,6 +444,7 @@ struct kvm_run { #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4 __u32 type; __u32 ndata; union { @@ -646,6 +647,7 @@ struct kvm_vapic_addr { #define KVM_MP_STATE_OPERATING 7 #define KVM_MP_STATE_LOAD 8 #define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10 struct kvm_mp_state { __u32 mp_state; -- cgit v1.2.3 From bfbab44568779e1682bc6f63688bb9c965f0e74a Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Wed, 4 May 2022 03:24:41 +0000 Subject: KVM: arm64: Implement PSCI SYSTEM_SUSPEND ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND" describes a PSCI call that allows software to request that a system be placed in the deepest possible low-power state. Effectively, software can use this to suspend itself to RAM. Unfortunately, there really is no good way to implement a system-wide PSCI call in KVM. Any precondition checks done in the kernel will need to be repeated by userspace since there is no good way to protect a critical section that spans an exit to userspace. SYSTEM_RESET and SYSTEM_OFF are equally plagued by this issue, although no users have seemingly cared for the relatively long time these calls have been supported. The solution is to just make the whole implementation userspace's problem. Introduce a new system event, KVM_SYSTEM_EVENT_SUSPEND, that indicates to userspace a calling vCPU has invoked PSCI SYSTEM_SUSPEND. Additionally, add a CAP to get buy-in from userspace for this new exit type. Only advertise the SYSTEM_SUSPEND PSCI call if userspace has opted in. If a vCPU calls SYSTEM_SUSPEND, punt straight to userspace. Provide explicit documentation of userspace's responsibilites for the exit and point to the PSCI specification to describe the actual PSCI call. Reviewed-by: Reiji Watanabe Signed-off-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20220504032446.4133305-8-oupton@google.com --- include/uapi/linux/kvm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 7f72fb7b05f2..32c56384fd08 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -445,6 +445,7 @@ struct kvm_run { #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 #define KVM_SYSTEM_EVENT_WAKEUP 4 +#define KVM_SYSTEM_EVENT_SUSPEND 5 __u32 type; __u32 ndata; union { @@ -1154,6 +1155,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_DISABLE_QUIRKS2 213 /* #define KVM_CAP_VM_TSC_CONTROL 214 */ #define KVM_CAP_SYSTEM_EVENT_DATA 215 +#define KVM_CAP_ARM_SYSTEM_SUSPEND 216 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.2.3 From 2068339a6c35147847ba433fd0da67b313779059 Mon Sep 17 00:00:00 2001 From: Dipen Patel Date: Fri, 22 Apr 2022 13:52:18 -0700 Subject: gpiolib: cdev: Add hardware timestamp clock type This patch adds new clock type for the GPIO controller which can timestamp gpio lines in using hardware means. To expose such functionalities to the userspace, code has been added where during line create or set config API calls, it checks for new clock type and if requested, calls HTE API. During line change event, the HTE subsystem pushes timestamp data to userspace through gpiolib-cdev. Signed-off-by: Dipen Patel Acked-by: Linus Walleij Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Thierry Reding --- include/uapi/linux/gpio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h index eaaea3d8e6b4..cb9966d49a16 100644 --- a/include/uapi/linux/gpio.h +++ b/include/uapi/linux/gpio.h @@ -66,6 +66,8 @@ struct gpiochip_info { * @GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN: line has pull-down bias enabled * @GPIO_V2_LINE_FLAG_BIAS_DISABLED: line has bias disabled * @GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME: line events contain REALTIME timestamps + * @GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE: line events contain timestamps from + * hardware timestamp engine */ enum gpio_v2_line_flag { GPIO_V2_LINE_FLAG_USED = _BITULL(0), @@ -80,6 +82,7 @@ enum gpio_v2_line_flag { GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN = _BITULL(9), GPIO_V2_LINE_FLAG_BIAS_DISABLED = _BITULL(10), GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME = _BITULL(11), + GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE = _BITULL(12), }; /** -- cgit v1.2.3 From 9ab4807c84a4aacfc9b4f79cc81254035e0ec361 Mon Sep 17 00:00:00 2001 From: Kishen Maloor Date: Tue, 3 May 2022 19:38:52 -0700 Subject: mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE This change adds a MPTCP netlink interface for issuing ADD_ADDR advertisements over the chosen MPTCP connection from a userspace path manager. The command requires the following parameters: { token, { loc_id, family, daddr4 | daddr6 [, dport] } [, if_idx], flags[signal] }. Acked-by: Paolo Abeni Signed-off-by: Kishen Maloor Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- include/uapi/linux/mptcp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index e41ea01a94bb..ac66c1263f02 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -55,6 +55,7 @@ enum { MPTCP_PM_ATTR_ADDR, /* nested address */ MPTCP_PM_ATTR_RCV_ADD_ADDRS, /* u32 */ MPTCP_PM_ATTR_SUBFLOWS, /* u32 */ + MPTCP_PM_ATTR_TOKEN, /* u32 */ __MPTCP_PM_ATTR_MAX }; @@ -93,6 +94,7 @@ enum { MPTCP_PM_CMD_SET_LIMITS, MPTCP_PM_CMD_GET_LIMITS, MPTCP_PM_CMD_SET_FLAGS, + MPTCP_PM_CMD_ANNOUNCE, __MPTCP_PM_CMD_AFTER_LAST }; -- cgit v1.2.3 From d9a4594edabf125dc17dfd52acc722c3de1cb44c Mon Sep 17 00:00:00 2001 From: Kishen Maloor Date: Tue, 3 May 2022 19:38:54 -0700 Subject: mptcp: netlink: Add MPTCP_PM_CMD_REMOVE This change adds a MPTCP netlink command for issuing a REMOVE_ADDR signal for an address over the chosen MPTCP connection from a userspace path manager. The command requires the following parameters: {token, loc_id}. Acked-by: Paolo Abeni Signed-off-by: Kishen Maloor Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- include/uapi/linux/mptcp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index ac66c1263f02..11f9fa001a3c 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -56,6 +56,7 @@ enum { MPTCP_PM_ATTR_RCV_ADD_ADDRS, /* u32 */ MPTCP_PM_ATTR_SUBFLOWS, /* u32 */ MPTCP_PM_ATTR_TOKEN, /* u32 */ + MPTCP_PM_ATTR_LOC_ID, /* u8 */ __MPTCP_PM_ATTR_MAX }; @@ -95,6 +96,7 @@ enum { MPTCP_PM_CMD_GET_LIMITS, MPTCP_PM_CMD_SET_FLAGS, MPTCP_PM_CMD_ANNOUNCE, + MPTCP_PM_CMD_REMOVE, __MPTCP_PM_CMD_AFTER_LAST }; -- cgit v1.2.3 From 702c2f646d42cfd9e31133d68a8283fea48fd810 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 3 May 2022 19:38:56 -0700 Subject: mptcp: netlink: allow userspace-driven subflow establishment This allows userspace to tell kernel to add a new subflow to an existing mptcp connection. Userspace provides the token to identify the mptcp-level connection that needs a change in active subflows and the local and remote addresses of the new or the to-be-removed subflow. MPTCP_PM_CMD_SUBFLOW_CREATE requires the following parameters: { token, { loc_id, family, loc_addr4 | loc_addr6 }, { family, rem_addr4 | rem_addr6, rem_port } MPTCP_PM_CMD_SUBFLOW_DESTROY requires the following parameters: { token, { family, loc_addr4 | loc_addr6, loc_port }, { family, rem_addr4 | rem_addr6, rem_port } Acked-by: Paolo Abeni Co-developed-by: Kishen Maloor Signed-off-by: Kishen Maloor Signed-off-by: Florian Westphal Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- include/uapi/linux/mptcp.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index 11f9fa001a3c..921963589904 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -57,6 +57,7 @@ enum { MPTCP_PM_ATTR_SUBFLOWS, /* u32 */ MPTCP_PM_ATTR_TOKEN, /* u32 */ MPTCP_PM_ATTR_LOC_ID, /* u8 */ + MPTCP_PM_ATTR_ADDR_REMOTE, /* nested address */ __MPTCP_PM_ATTR_MAX }; @@ -97,6 +98,8 @@ enum { MPTCP_PM_CMD_SET_FLAGS, MPTCP_PM_CMD_ANNOUNCE, MPTCP_PM_CMD_REMOVE, + MPTCP_PM_CMD_SUBFLOW_CREATE, + MPTCP_PM_CMD_SUBFLOW_DESTROY, __MPTCP_PM_CMD_AFTER_LAST }; -- cgit v1.2.3 From 36f8423597000bd7d5e48b7b306e1d0958e72359 Mon Sep 17 00:00:00 2001 From: Muna Sinada Date: Wed, 23 Mar 2022 15:46:35 -0700 Subject: cfg80211: support disabling EHT mode Allow userspace to disable EHT mode during association. Signed-off-by: Muna Sinada Signed-off-by: Aloka Dixit Link: https://lore.kernel.org/r/20220323224636.20211-1-quic_alokad@quicinc.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 0568a79097b8..d9490e3062a7 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3175,6 +3175,8 @@ enum nl80211_attrs { NL80211_ATTR_EHT_CAPABILITY, + NL80211_ATTR_DISABLE_EHT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From c4a67a21a6d255ddcbaa076c0412aad73c7e0c02 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 4 May 2022 08:40:37 -0700 Subject: Revert "Merge branch 'mlxsw-line-card-model'" This reverts commit 5e927a9f4b9f29d78a7c7d66ea717bb5c8bbad8e, reversing changes made to cfc1d91a7d78cf9de25b043d81efcc16966d55b3. The discussion is still ongoing so let's remove the uAPI until the discussion settles. Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/ Reviewed-by: Ido Schimmel Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- include/uapi/linux/devlink.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index fb8c3864457f..b3d40a5d72ff 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -136,8 +136,6 @@ enum devlink_command { DEVLINK_CMD_LINECARD_NEW, DEVLINK_CMD_LINECARD_DEL, - DEVLINK_CMD_LINECARD_INFO_GET, /* can dump */ - /* add new commands above here */ __DEVLINK_CMD_MAX, DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1 @@ -577,9 +575,6 @@ enum devlink_attr { DEVLINK_ATTR_LINECARD_STATE, /* u8 */ DEVLINK_ATTR_LINECARD_TYPE, /* string */ DEVLINK_ATTR_LINECARD_SUPPORTED_TYPES, /* nested */ - DEVLINK_ATTR_LINECARD_DEVICE_LIST, /* nested */ - DEVLINK_ATTR_LINECARD_DEVICE, /* nested */ - DEVLINK_ATTR_LINECARD_DEVICE_INDEX, /* u32 */ /* add new attributes above here, update the policy in devlink.c */ -- cgit v1.2.3 From bd32889e841c12533d09a1bd02bba932baa9ed8f Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 29 Apr 2022 23:56:41 +0000 Subject: binder: add BINDER_GET_EXTENDED_ERROR ioctl Provide a userspace mechanism to pull precise error information upon failed operations. Extending the current error codes returned by the interfaces allows userspace to better determine the course of action. This could be for instance, retrying a failed transaction at a later point and thus offloading the error handling from the driver. Acked-by: Christian Brauner (Microsoft) Acked-by: Todd Kjos Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20220429235644.697372-3-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/android/binder.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index 11157fae8a8e..e6ee8cae303b 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -236,6 +236,21 @@ struct binder_frozen_status_info { __u32 async_recv; }; +/* struct binder_extened_error - extended error information + * @id: identifier for the failed operation + * @command: command as defined by binder_driver_return_protocol + * @param: parameter holding a negative errno value + * + * Used with BINDER_GET_EXTENDED_ERROR. This extends the error information + * returned by the driver upon a failed operation. Userspace can pull this + * data to properly handle specific error scenarios. + */ +struct binder_extended_error { + __u32 id; + __u32 command; + __s32 param; +}; + #define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read) #define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64) #define BINDER_SET_MAX_THREADS _IOW('b', 5, __u32) @@ -249,6 +264,7 @@ struct binder_frozen_status_info { #define BINDER_FREEZE _IOW('b', 14, struct binder_freeze_info) #define BINDER_GET_FROZEN_INFO _IOWR('b', 15, struct binder_frozen_status_info) #define BINDER_ENABLE_ONEWAY_SPAM_DETECTION _IOW('b', 16, __u32) +#define BINDER_GET_EXTENDED_ERROR _IOWR('b', 17, struct binder_extended_error) /* * NOTE: Two special error codes you should check for when calling -- cgit v1.2.3 From 26101f5ab6bdf30ac25c8e578e0b4873e7849e0c Mon Sep 17 00:00:00 2001 From: Kaixi Fan Date: Sat, 30 Apr 2022 15:48:42 +0800 Subject: bpf: Add source ip in "struct bpf_tunnel_key" Add tunnel source ip field in "struct bpf_tunnel_key". Add related code to set and get tunnel source field. Signed-off-by: Kaixi Fan Link: https://lore.kernel.org/r/20220430074844.69214-2-fankaixi.li@bytedance.com Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 444fe6f1cf35..95a3d1ff6255 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5604,6 +5604,10 @@ struct bpf_tunnel_key { __u8 tunnel_ttl; __u16 tunnel_ext; /* Padding, future use. */ __u32 tunnel_label; + union { + __u32 local_ipv4; + __u32 local_ipv6[4]; + }; }; /* user accessible mirror of in-kernel xfrm_state. -- cgit v1.2.3 From f7e0beaf39d3868dc700d4954b26cf8443c5d423 Mon Sep 17 00:00:00 2001 From: Kui-Feng Lee Date: Tue, 10 May 2022 13:59:19 -0700 Subject: bpf, x86: Generate trampolines from bpf_tramp_links Replace struct bpf_tramp_progs with struct bpf_tramp_links to collect struct bpf_tramp_link(s) for a trampoline. struct bpf_tramp_link extends bpf_link to act as a linked list node. arch_prepare_bpf_trampoline() accepts a struct bpf_tramp_links to collects all bpf_tramp_link(s) that a trampoline should call. Change BPF trampoline and bpf_struct_ops to pass bpf_tramp_links instead of bpf_tramp_progs. Signed-off-by: Kui-Feng Lee Signed-off-by: Alexei Starovoitov Signed-off-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220510205923.3206889-2-kuifeng@fb.com --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 95a3d1ff6255..3d032ea1b6a3 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1013,6 +1013,7 @@ enum bpf_link_type { BPF_LINK_TYPE_XDP = 6, BPF_LINK_TYPE_PERF_EVENT = 7, BPF_LINK_TYPE_KPROBE_MULTI = 8, + BPF_LINK_TYPE_STRUCT_OPS = 9, MAX_BPF_LINK_TYPE, }; -- cgit v1.2.3 From 2fcc82411e74e5e6aba336561cf56fb899bfae4e Mon Sep 17 00:00:00 2001 From: Kui-Feng Lee Date: Tue, 10 May 2022 13:59:21 -0700 Subject: bpf, x86: Attach a cookie to fentry/fexit/fmod_ret/lsm. Pass a cookie along with BPF_LINK_CREATE requests. Add a bpf_cookie field to struct bpf_tracing_link to attach a cookie. The cookie of a bpf_tracing_link is available by calling bpf_get_attach_cookie when running the BPF program of the attached link. The value of a cookie will be set at bpf_tramp_run_ctx by the trampoline of the link. Signed-off-by: Kui-Feng Lee Signed-off-by: Alexei Starovoitov Signed-off-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220510205923.3206889-4-kuifeng@fb.com --- include/uapi/linux/bpf.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 3d032ea1b6a3..bc7f89948f54 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1490,6 +1490,15 @@ union bpf_attr { __aligned_u64 addrs; __aligned_u64 cookies; } kprobe_multi; + struct { + /* this is overlaid with the target_btf_id above. */ + __u32 target_btf_id; + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 cookie; + } tracing; }; } link_create; -- cgit v1.2.3 From 07343110b293456d30393e89b86c4dee1ac051c8 Mon Sep 17 00:00:00 2001 From: Feng Zhou Date: Wed, 11 May 2022 17:38:53 +0800 Subject: bpf: add bpf_map_lookup_percpu_elem for percpu map Add new ebpf helpers bpf_map_lookup_percpu_elem. The implementation method is relatively simple, refer to the implementation method of map_lookup_elem of percpu map, increase the parameters of cpu, and obtain it according to the specified cpu. Signed-off-by: Feng Zhou Link: https://lore.kernel.org/r/20220511093854.411-2-zhoufeng.zf@bytedance.com Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index bc7f89948f54..0210f85131b3 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5164,6 +5164,14 @@ union bpf_attr { * if not NULL, is a reference which must be released using its * corresponding release function, or moved into a BPF map before * program exit. + * + * void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) + * Description + * Perform a lookup in *percpu map* for an entry associated to + * *key* on *cpu*. + * Return + * Map value associated to *key* on *cpu*, or **NULL** if no entry + * was found or *cpu* is invalid. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5361,6 +5369,7 @@ union bpf_attr { FN(skb_set_tstamp), \ FN(ima_file_hash), \ FN(kptr_xchg), \ + FN(map_lookup_percpu_elem), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper -- cgit v1.2.3 From c9b516f16be5896a3d798f8efb03acbd2ceec715 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 12 May 2022 20:38:36 -0700 Subject: ELF, uapi: fixup ELF_ST_TYPE definition This is very theoretical compile failure: ELF_ST_TYPE(st_info = A) Cast will bind first and st_info will stop being lvalue: error: lvalue required as left operand of assignment Given that the only use of this macro is ELF_ST_TYPE(sym->st_info) where st_info is "unsigned char" I've decided to remove cast especially given that companion macro ELF_ST_BIND doesn't use cast. Link: https://lkml.kernel.org/r/Ymv7G1BeX4kt3obz@localhost.localdomain Signed-off-by: Alexey Dobriyan Acked-by: Kees Cook Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton --- include/uapi/linux/elf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index 787c657bfae8..237f21a5e0f6 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -134,7 +134,7 @@ typedef __s64 Elf64_Sxword; #define STT_TLS 6 #define ELF_ST_BIND(x) ((x) >> 4) -#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf) +#define ELF_ST_TYPE(x) ((x) & 0xf) #define ELF32_ST_BIND(x) ELF_ST_BIND(x) #define ELF32_ST_TYPE(x) ELF_ST_TYPE(x) #define ELF64_ST_BIND(x) ELF_ST_BIND(x) -- cgit v1.2.3 From 783eb354fb3dcd598e8e7e8a2ed88c0fb6ce5d2f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 4 Apr 2022 15:19:41 +0900 Subject: agpgart.h: do not include from exported header Commit 35d0f1d54ecd ("include/uapi/linux/agpgart.h: include stdlib.h in userspace") included to fix the unknown size_t error, but I do not think it is the right fix. This header already uses __kernel_size_t a few lines below. Replace the remaining size_t, and stop including . Signed-off-by: Masahiro Yamada Signed-off-by: Arnd Bergmann Reviewed-by: Christoph Hellwig Reviewed-by: Nick Desaulniers --- include/uapi/linux/agpgart.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/agpgart.h b/include/uapi/linux/agpgart.h index f5251045181a..9cc3448c0b5b 100644 --- a/include/uapi/linux/agpgart.h +++ b/include/uapi/linux/agpgart.h @@ -52,7 +52,6 @@ #ifndef __KERNEL__ #include -#include struct agp_version { __u16 major; @@ -64,10 +63,10 @@ typedef struct _agp_info { __u32 bridge_id; /* bridge vendor/device */ __u32 agp_mode; /* mode info of bridge */ unsigned long aper_base;/* base of aperture */ - size_t aper_size; /* size of aperture */ - size_t pg_total; /* max pages (swap + system) */ - size_t pg_system; /* max pages (system) */ - size_t pg_used; /* current pages used */ + __kernel_size_t aper_size; /* size of aperture */ + __kernel_size_t pg_total; /* max pages (swap + system) */ + __kernel_size_t pg_system; /* max pages (system) */ + __kernel_size_t pg_used; /* current pages used */ } agp_info; typedef struct _agp_setup { -- cgit v1.2.3 From b1f9e876862d8f7176299ec4fb2108bc1045cbc8 Mon Sep 17 00:00:00 2001 From: Peter Xu Date: Thu, 12 May 2022 20:22:56 -0700 Subject: mm/uffd: enable write protection for shmem & hugetlbfs We've had all the necessary changes ready for both shmem and hugetlbfs. Turn on all the shmem/hugetlbfs switches for userfaultfd-wp. We can expand UFFD_API_RANGE_IOCTLS_BASIC with _UFFDIO_WRITEPROTECT too because all existing types now support write protection mode. Since vma_can_userfault() will be used elsewhere, move into userfaultfd_k.h. Link: https://lkml.kernel.org/r/20220405014926.15101-1-peterx@redhat.com Signed-off-by: Peter Xu Cc: Alistair Popple Cc: Andrea Arcangeli Cc: Axel Rasmussen Cc: David Hildenbrand Cc: Hugh Dickins Cc: Jerome Glisse Cc: "Kirill A . Shutemov" Cc: Matthew Wilcox Cc: Mike Kravetz Cc: Mike Rapoport Cc: Nadav Amit Signed-off-by: Andrew Morton --- include/uapi/linux/userfaultfd.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h index ef739054cb1c..7d32b1e797fb 100644 --- a/include/uapi/linux/userfaultfd.h +++ b/include/uapi/linux/userfaultfd.h @@ -33,7 +33,8 @@ UFFD_FEATURE_THREAD_ID | \ UFFD_FEATURE_MINOR_HUGETLBFS | \ UFFD_FEATURE_MINOR_SHMEM | \ - UFFD_FEATURE_EXACT_ADDRESS) + UFFD_FEATURE_EXACT_ADDRESS | \ + UFFD_FEATURE_WP_HUGETLBFS_SHMEM) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -47,7 +48,8 @@ #define UFFD_API_RANGE_IOCTLS_BASIC \ ((__u64)1 << _UFFDIO_WAKE | \ (__u64)1 << _UFFDIO_COPY | \ - (__u64)1 << _UFFDIO_CONTINUE) + (__u64)1 << _UFFDIO_CONTINUE | \ + (__u64)1 << _UFFDIO_WRITEPROTECT) /* * Valid ioctl command number range with this API is from 0x00 to @@ -194,6 +196,9 @@ struct uffdio_api { * UFFD_FEATURE_EXACT_ADDRESS indicates that the exact address of page * faults would be provided and the offset within the page would not be * masked. + * + * UFFD_FEATURE_WP_HUGETLBFS_SHMEM indicates that userfaultfd + * write-protection mode is supported on both shmem and hugetlbfs. */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) @@ -207,6 +212,7 @@ struct uffdio_api { #define UFFD_FEATURE_MINOR_HUGETLBFS (1<<9) #define UFFD_FEATURE_MINOR_SHMEM (1<<10) #define UFFD_FEATURE_EXACT_ADDRESS (1<<11) +#define UFFD_FEATURE_WP_HUGETLBFS_SHMEM (1<<12) __u64 features; __u64 ioctls; -- cgit v1.2.3 From 89527be8d8d672773eeaec910118a6e84fb597e3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 13 May 2022 11:33:56 -0700 Subject: net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes New netlink attributes IFLA_TSO_MAX_SIZE and IFLA_TSO_MAX_SEGS are used to report to user-space the device TSO limits. ip -d link sh dev eth1 ... tso_max_size 65536 tso_max_segs 65535 Signed-off-by: Eric Dumazet Acked-by: Alexander Duyck Signed-off-by: David S. Miller --- include/uapi/linux/if_link.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index d1e600816b82..5f58dcfe2787 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -368,6 +368,8 @@ enum { IFLA_PARENT_DEV_NAME, IFLA_PARENT_DEV_BUS_NAME, IFLA_GRO_MAX_SIZE, + IFLA_TSO_MAX_SIZE, + IFLA_TSO_MAX_SEGS, __IFLA_MAX }; -- cgit v1.2.3 From 1c05bb947f6464756174830b778aabf8f9d6ed0e Mon Sep 17 00:00:00 2001 From: Thomas Huth Date: Mon, 16 May 2022 12:12:02 +0200 Subject: include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead There is no macro called _IORW, so use _IOWR in the comment instead. Signed-off-by: Thomas Huth Reviewed-by: Cornelia Huck Link: https://lore.kernel.org/r/20220516101202.88373-1-thuth@redhat.com Signed-off-by: Alex Williamson --- include/uapi/linux/vfio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index fea86061b44e..733a1cddde30 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -643,7 +643,7 @@ enum { }; /** - * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12, + * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12, * struct vfio_pci_hot_reset_info) * * Return: 0 on success, -errno on failure: @@ -770,7 +770,7 @@ struct vfio_device_ioeventfd { #define VFIO_DEVICE_IOEVENTFD _IO(VFIO_TYPE, VFIO_BASE + 16) /** - * VFIO_DEVICE_FEATURE - _IORW(VFIO_TYPE, VFIO_BASE + 17, + * VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17, * struct vfio_device_feature) * * Get, set, or probe feature data of the device. The feature is selected -- cgit v1.2.3 From 9f39d36530e5678d092d53c5c2c60d82b4dcc169 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Sat, 7 May 2022 13:55:58 +0200 Subject: can: isotp: add support for transmission without flow control Usually the ISO 15765-2 protocol is a point-to-point protocol to transfer segmented PDUs to a dedicated receiver. This receiver sends a flow control message to specify protocol options and timings (e.g. block size / STmin). The so called functional addressing communication allows a 1:N communication but is limited to a single frame length. This new CAN_ISOTP_CF_BROADCAST allows an unconfirmed 1:N communication with PDU length that would not fit into a single frame. This feature is not covered by the ISO 15765-2 standard. Link: https://lore.kernel.org/all/20220507115558.19065-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/uapi/linux/can/isotp.h | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h index 590f8aea2b6d..439c982f7e81 100644 --- a/include/uapi/linux/can/isotp.h +++ b/include/uapi/linux/can/isotp.h @@ -124,18 +124,19 @@ struct can_isotp_ll_options { /* flags for isotp behaviour */ -#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */ -#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */ -#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */ -#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */ -#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */ -#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */ -#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */ -#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */ -#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ -#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ -#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ -#define CAN_ISOTP_SF_BROADCAST 0x800 /* 1-to-N functional addressing */ +#define CAN_ISOTP_LISTEN_MODE 0x0001 /* listen only (do not send FC) */ +#define CAN_ISOTP_EXTEND_ADDR 0x0002 /* enable extended addressing */ +#define CAN_ISOTP_TX_PADDING 0x0004 /* enable CAN frame padding tx path */ +#define CAN_ISOTP_RX_PADDING 0x0008 /* enable CAN frame padding rx path */ +#define CAN_ISOTP_CHK_PAD_LEN 0x0010 /* check received CAN frame padding */ +#define CAN_ISOTP_CHK_PAD_DATA 0x0020 /* check received CAN frame padding */ +#define CAN_ISOTP_HALF_DUPLEX 0x0040 /* half duplex error state handling */ +#define CAN_ISOTP_FORCE_TXSTMIN 0x0080 /* ignore stmin from received FC */ +#define CAN_ISOTP_FORCE_RXSTMIN 0x0100 /* ignore CFs depending on rx stmin */ +#define CAN_ISOTP_RX_EXT_ADDR 0x0200 /* different rx extended addressing */ +#define CAN_ISOTP_WAIT_TX_DONE 0x0400 /* wait for tx completion */ +#define CAN_ISOTP_SF_BROADCAST 0x0800 /* 1-to-N functional addressing */ +#define CAN_ISOTP_CF_BROADCAST 0x1000 /* 1-to-N transmission w/o FC */ /* protocol machine default values */ -- cgit v1.2.3 From c1318b39c7d36bd5139a9c71044ff2b2d3c6f9d8 Mon Sep 17 00:00:00 2001 From: Boris Pismenny Date: Wed, 18 May 2022 12:27:31 +0300 Subject: tls: Add opt-in zerocopy mode of sendfile() TLS device offload copies sendfile data to a bounce buffer before transmitting. It allows to maintain the valid MAC on TLS records when the file contents change and a part of TLS record has to be retransmitted on TCP level. In many common use cases (like serving static files over HTTPS) the file contents are not changed on the fly. In many use cases breaking the connection is totally acceptable if the file is changed during transmission, because it would be received corrupted in any case. This commit allows to optimize performance for such use cases to providing a new optional mode of TLS sendfile(), in which the extra copy is skipped. Removing this copy improves performance significantly, as TLS and TCP sendfile perform the same operations, and the only overhead is TLS header/trailer insertion. The new mode can only be enabled with the new socket option named TLS_TX_ZEROCOPY_SENDFILE on per-socket basis. It preserves backwards compatibility with existing applications that rely on the copying behavior. The new mode is safe, meaning that unsolicited modifications of the file being sent can't break integrity of the kernel. The worst thing that can happen is sending a corrupted TLS record, which is in any case not forbidden when using regular TCP sockets. Sockets other than TLS device offload are not affected by the new socket option. The actual status of zerocopy sendfile can be queried with sock_diag. Performance numbers in a single-core test with 24 HTTPS streams on nginx, under 100% CPU load: * non-zerocopy: 33.6 Gbit/s * zerocopy: 79.92 Gbit/s CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz Signed-off-by: Boris Pismenny Signed-off-by: Tariq Toukan Signed-off-by: Maxim Mikityanskiy Reviewed-by: Jakub Kicinski Link: https://lore.kernel.org/r/20220518092731.1243494-1-maximmi@nvidia.com Signed-off-by: Paolo Abeni --- include/uapi/linux/tls.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index 5f38be0ec0f3..ac39328eabe7 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -39,6 +39,7 @@ /* TLS socket options */ #define TLS_TX 1 /* Set transmit parameters */ #define TLS_RX 2 /* Set receive parameters */ +#define TLS_TX_ZEROCOPY_SENDFILE 3 /* transmit zerocopy sendfile */ /* Supported versions */ #define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) @@ -160,6 +161,7 @@ enum { TLS_INFO_CIPHER, TLS_INFO_TXCONF, TLS_INFO_RXCONF, + TLS_INFO_ZC_SENDFILE, __TLS_INFO_MAX, }; #define TLS_INFO_MAX (__TLS_INFO_MAX - 1) -- cgit v1.2.3 From 3bc253c2e652cf5f12cd8c00d80d8ec55d67d1a7 Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Thu, 19 May 2022 16:30:10 -0700 Subject: bpf: Add bpf_skc_to_mptcp_sock_proto This patch implements a new struct bpf_func_proto, named bpf_skc_to_mptcp_sock_proto. Define a new bpf_id BTF_SOCK_TYPE_MPTCP, and a new helper bpf_skc_to_mptcp_sock(), which invokes another new helper bpf_mptcp_sock_from_subflow() in net/mptcp/bpf.c to get struct mptcp_sock from a given subflow socket. v2: Emit BTF type, add func_id checks in verifier.c and bpf_trace.c, remove build check for CONFIG_BPF_JIT v5: Drop EXPORT_SYMBOL (Martin) Co-developed-by: Nicolas Rybowski Co-developed-by: Matthieu Baerts Signed-off-by: Nicolas Rybowski Signed-off-by: Matthieu Baerts Signed-off-by: Geliang Tang Signed-off-by: Mat Martineau Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220519233016.105670-2-mathew.j.martineau@linux.intel.com --- include/uapi/linux/bpf.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 0210f85131b3..56688bee20d9 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5172,6 +5172,12 @@ union bpf_attr { * Return * Map value associated to *key* on *cpu*, or **NULL** if no entry * was found or *cpu* is invalid. + * + * struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5370,6 +5376,7 @@ union bpf_attr { FN(ima_file_hash), \ FN(kptr_xchg), \ FN(map_lookup_percpu_elem), \ + FN(skc_to_mptcp_sock), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper -- cgit v1.2.3 From 97e03f521050c092919591e668107b3d69c5f426 Mon Sep 17 00:00:00 2001 From: Joanne Koong Date: Mon, 23 May 2022 14:07:07 -0700 Subject: bpf: Add verifier support for dynptrs This patch adds the bulk of the verifier work for supporting dynamic pointers (dynptrs) in bpf. A bpf_dynptr is opaque to the bpf program. It is a 16-byte structure defined internally as: struct bpf_dynptr_kern { void *data; u32 size; u32 offset; } __aligned(8); The upper 8 bits of *size* is reserved (it contains extra metadata about read-only status and dynptr type). Consequently, a dynptr only supports memory less than 16 MB. There are different types of dynptrs (eg malloc, ringbuf, ...). In this patchset, the most basic one, dynptrs to a bpf program's local memory, is added. For now only local memory that is of reg type PTR_TO_MAP_VALUE is supported. In the verifier, dynptr state information will be tracked in stack slots. When the program passes in an uninitialized dynptr (ARG_PTR_TO_DYNPTR | MEM_UNINIT), the stack slots corresponding to the frame pointer where the dynptr resides at are marked STACK_DYNPTR. For helper functions that take in initialized dynptrs (eg bpf_dynptr_read + bpf_dynptr_write which are added later in this patchset), the verifier enforces that the dynptr has been initialized properly by checking that their corresponding stack slots have been marked as STACK_DYNPTR. The 6th patch in this patchset adds test cases that the verifier should successfully reject, such as for example attempting to use a dynptr after doing a direct write into it inside the bpf program. Signed-off-by: Joanne Koong Signed-off-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Acked-by: David Vernet Link: https://lore.kernel.org/bpf/20220523210712.3641569-2-joannelkoong@gmail.com --- include/uapi/linux/bpf.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 56688bee20d9..610944cb3389 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -6528,6 +6528,11 @@ struct bpf_timer { __u64 :64; } __attribute__((aligned(8))); +struct bpf_dynptr { + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + struct bpf_sysctl { __u32 write; /* Sysctl is being read (= 0) or written (= 1). * Allows 1,2,4-byte read, but no write. -- cgit v1.2.3 From 263ae152e96253f40c2c276faad8629e096b3bad Mon Sep 17 00:00:00 2001 From: Joanne Koong Date: Mon, 23 May 2022 14:07:08 -0700 Subject: bpf: Add bpf_dynptr_from_mem for local dynptrs This patch adds a new api bpf_dynptr_from_mem: long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr); which initializes a dynptr to point to a bpf program's local memory. For now only local memory that is of reg type PTR_TO_MAP_VALUE is supported. Signed-off-by: Joanne Koong Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220523210712.3641569-3-joannelkoong@gmail.com --- include/uapi/linux/bpf.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 610944cb3389..9be3644457dd 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5178,6 +5178,17 @@ union bpf_attr { * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer. * Return * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Get a dynptr to local memory *data*. + * + * *data* must be a ptr to a map value. + * The maximum *size* supported is DYNPTR_MAX_SIZE. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE, + * -EINVAL if flags is not 0. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5377,6 +5388,7 @@ union bpf_attr { FN(kptr_xchg), \ FN(map_lookup_percpu_elem), \ FN(skc_to_mptcp_sock), \ + FN(dynptr_from_mem), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper -- cgit v1.2.3 From bc34dee65a65e9c920c420005b8a43f2a721a458 Mon Sep 17 00:00:00 2001 From: Joanne Koong Date: Mon, 23 May 2022 14:07:09 -0700 Subject: bpf: Dynptr support for ring buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, our only way of writing dynamically-sized data into a ring buffer is through bpf_ringbuf_output but this incurs an extra memcpy cost. bpf_ringbuf_reserve + bpf_ringbuf_commit avoids this extra memcpy, but it can only safely support reservation sizes that are statically known since the verifier cannot guarantee that the bpf program won’t access memory outside the reserved space. The bpf_dynptr abstraction allows for dynamically-sized ring buffer reservations without the extra memcpy. There are 3 new APIs: long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr); void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags); void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags); These closely follow the functionalities of the original ringbuf APIs. For example, all ringbuffer dynptrs that have been reserved must be either submitted or discarded before the program exits. Signed-off-by: Joanne Koong Signed-off-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Acked-by: David Vernet Link: https://lore.kernel.org/bpf/20220523210712.3641569-4-joannelkoong@gmail.com --- include/uapi/linux/bpf.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 9be3644457dd..081a55540aa5 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5189,6 +5189,38 @@ union bpf_attr { * Return * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE, * -EINVAL if flags is not 0. + * + * long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf* + * through the dynptr interface. *flags* must be 0. + * + * Please note that a corresponding bpf_ringbuf_submit_dynptr or + * bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the + * reservation fails. This is enforced by the verifier. + * Return + * 0 on success, or a negative error in case of failure. + * + * void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*, + * through the dynptr interface. This is a no-op if the dynptr is + * invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_submit'. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Discard reserved ring buffer sample through the dynptr + * interface. This is a no-op if the dynptr is invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_discard'. + * Return + * Nothing. Always succeeds. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5389,6 +5421,9 @@ union bpf_attr { FN(map_lookup_percpu_elem), \ FN(skc_to_mptcp_sock), \ FN(dynptr_from_mem), \ + FN(ringbuf_reserve_dynptr), \ + FN(ringbuf_submit_dynptr), \ + FN(ringbuf_discard_dynptr), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper -- cgit v1.2.3 From 13bbbfbea7598ea9f8d9c3d73bf053bb57f9c4b2 Mon Sep 17 00:00:00 2001 From: Joanne Koong Date: Mon, 23 May 2022 14:07:10 -0700 Subject: bpf: Add bpf_dynptr_read and bpf_dynptr_write This patch adds two helper functions, bpf_dynptr_read and bpf_dynptr_write: long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset); long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len); The dynptr passed into these functions must be valid dynptrs that have been initialized. Signed-off-by: Joanne Koong Signed-off-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220523210712.3641569-5-joannelkoong@gmail.com --- include/uapi/linux/bpf.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 081a55540aa5..efe2505650e6 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5221,6 +5221,23 @@ union bpf_attr { * 'bpf_ringbuf_discard'. * Return * Nothing. Always succeeds. + * + * long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset) + * Description + * Read *len* bytes from *src* into *dst*, starting from *offset* + * into *src*. + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *src*'s data, -EINVAL if *src* is an invalid dynptr. + * + * long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len) + * Description + * Write *len* bytes from *src* into *dst*, starting from *offset* + * into *dst*. + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* + * is a read-only dynptr. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5424,6 +5441,8 @@ union bpf_attr { FN(ringbuf_reserve_dynptr), \ FN(ringbuf_submit_dynptr), \ FN(ringbuf_discard_dynptr), \ + FN(dynptr_read), \ + FN(dynptr_write), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper -- cgit v1.2.3 From 34d4ef5775f776ec4b0d53a02d588bf3195cada6 Mon Sep 17 00:00:00 2001 From: Joanne Koong Date: Mon, 23 May 2022 14:07:11 -0700 Subject: bpf: Add dynptr data slices This patch adds a new helper function void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len); which returns a pointer to the underlying data of a dynptr. *len* must be a statically known value. The bpf program may access the returned data slice as a normal buffer (eg can do direct reads and writes), since the verifier associates the length with the returned pointer, and enforces that no out of bounds accesses occur. Signed-off-by: Joanne Koong Signed-off-by: Andrii Nakryiko Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/20220523210712.3641569-6-joannelkoong@gmail.com --- include/uapi/linux/bpf.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index efe2505650e6..f4009dbdf62d 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5238,6 +5238,17 @@ union bpf_attr { * 0 on success, -E2BIG if *offset* + *len* exceeds the length * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* * is a read-only dynptr. + * + * void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len) + * Description + * Get a pointer to the underlying dynptr data. + * + * *len* must be a statically known value. The returned data slice + * is invalidated whenever the dynptr is invalidated. + * Return + * Pointer to the underlying dynptr data, NULL if the dynptr is + * read-only, if the dynptr is invalid, or if the offset and length + * is out of bounds. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5443,6 +5454,7 @@ union bpf_attr { FN(ringbuf_discard_dynptr), \ FN(dynptr_read), \ FN(dynptr_write), \ + FN(dynptr_data), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper -- cgit v1.2.3 From e5499dd7253c8382d03f687f19a854adcc688357 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Wed, 25 May 2022 14:08:30 +0100 Subject: media: lirc: revert removal of unused feature flags Commit b2a90f4fcb14 ("media: lirc: remove unused lirc features") removed feature flags which were never implemented, but they are still used by the lirc daemon went built from source. Reinstate these symbols in order not to break the lirc build. Fixes: b2a90f4fcb14 ("media: lirc: remove unused lirc features") Link: https://lore.kernel.org/all/a0470450-ecfd-2918-e04a-7b57c1fd7694@kernel.org/ Reported-by: Jiri Slaby Cc: Mauro Carvalho Chehab Signed-off-by: Sean Young Signed-off-by: Linus Torvalds --- include/uapi/linux/lirc.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h index 23b0f2c8ba81..8d7ca7c6af42 100644 --- a/include/uapi/linux/lirc.h +++ b/include/uapi/linux/lirc.h @@ -84,6 +84,13 @@ #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) +/* + * Unused features. These features were never implemented, in tree or + * out of tree. These definitions are here so not to break the lircd build. + */ +#define LIRC_CAN_SET_REC_FILTER 0 +#define LIRC_CAN_NOTIFY_DECODE 0 + /*** IOCTL commands for lirc driver ***/ #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) -- cgit v1.2.3 From caa28984163cb63ea0be4cb8dbf05defdc7303f9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 25 May 2022 09:02:19 -0700 Subject: linux/types.h: reinstate "__bitwise__" macro for user space use Commit c724c866bb70 ("linux/types.h: remove unnecessary __bitwise__") was right that there are no users of __bitwise__ in the kernel, but it turns out there are user space users of it that do expect it. It is, after all, in the uapi directory, so user space usage is to be expected. Instead of reverting the commit completely, let's just clarify the situation so that it doesn't happen again, and have some in-code explanations for why that "__bitwise__" still exists. Reported-by: Jiri Slaby Cc: Bjorn Helgaas Link: https://lore.kernel.org/all/b5c0a68d-8387-4909-beea-f70ab9e6e3d5@kernel.org/ Signed-off-by: Linus Torvalds --- include/uapi/linux/types.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h index c4dc597f3dcf..308433be33c2 100644 --- a/include/uapi/linux/types.h +++ b/include/uapi/linux/types.h @@ -26,6 +26,9 @@ #define __bitwise #endif +/* The kernel doesn't use this legacy form, but user space does */ +#define __bitwise__ __bitwise + typedef __u16 __bitwise __le16; typedef __u16 __bitwise __be16; typedef __u32 __bitwise __le32; -- cgit v1.2.3 From a7c41b4687f5902af70cd559806990930c8a307b Mon Sep 17 00:00:00 2001 From: Xiaoguang Wang Date: Mon, 30 May 2022 21:15:20 +0800 Subject: io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots One big issue with the file registration feature is that it needs user space apps to maintain free slot info about io_uring's fixed file table, which really is a burden for development. io_uring now supports choosing free file slot for user space apps by using IORING_FILE_INDEX_ALLOC flag in accept, open, and socket operations, but they need the app to use direct accept or direct open, which not all apps are prepared to use yet. To support apps that still need real fds, make use of the registration feature easier. Let IORING_OP_FILES_UPDATE support choosing fixed file slots, which will store picked fixed files slots in fd array and let cqe return the number of slots allocated. Suggested-by: Hao Xu Signed-off-by: Xiaoguang Wang [axboe: move flag to uapi io_uring header, change goto to break, init] Signed-off-by: Jens Axboe --- include/uapi/linux/io_uring.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index 53e7dae92e42..776e0278f9dd 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -47,6 +47,7 @@ struct io_uring_sqe { __u32 unlink_flags; __u32 hardlink_flags; __u32 xattr_flags; + __u32 close_flags; }; __u64 user_data; /* data to be passed back at completion time */ /* pack this to avoid bogus arm OABI complaints */ @@ -258,6 +259,11 @@ enum io_uring_op { */ #define IORING_ACCEPT_MULTISHOT (1U << 0) +/* + * close flags, store in sqe->close_flags + */ +#define IORING_CLOSE_FD_AND_FILE_SLOT (1U << 0) + /* * IO completion data structure (Completion Queue Entry) */ -- cgit v1.2.3 From 3e0b8f529c10037ae0b369fc892e524eae5a5485 Mon Sep 17 00:00:00 2001 From: Arun Ajith S Date: Mon, 30 May 2022 10:14:14 +0000 Subject: net/ipv6: Expand and rename accept_unsolicited_na to accept_untracked_na RFC 9131 changes default behaviour of handling RX of NA messages when the corresponding entry is absent in the neighbour cache. The current implementation is limited to accept just unsolicited NAs. However, the RFC is more generic where it also accepts solicited NAs. Both types should result in adding a STALE entry for this case. Expand accept_untracked_na behaviour to also accept solicited NAs to be compliant with the RFC and rename the sysctl knob to accept_untracked_na. Fixes: f9a2fb73318e ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131") Signed-off-by: Arun Ajith S Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com Signed-off-by: Paolo Abeni --- include/uapi/linux/ipv6.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 549ddeaf788b..03cdbe798fe3 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -194,7 +194,7 @@ enum { DEVCONF_IOAM6_ID, DEVCONF_IOAM6_ID_WIDE, DEVCONF_NDISC_EVICT_NOCARRIER, - DEVCONF_ACCEPT_UNSOLICITED_NA, + DEVCONF_ACCEPT_UNTRACKED_NA, DEVCONF_MAX }; -- cgit v1.2.3 From 13b00b135665c92065a27c0c39dd97e0f380bd4f Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 18 May 2022 16:38:00 +0300 Subject: vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/vdpa.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h index 1061d8d2d09d..25c55cab3d7c 100644 --- a/include/uapi/linux/vdpa.h +++ b/include/uapi/linux/vdpa.h @@ -18,6 +18,7 @@ enum vdpa_command { VDPA_CMD_DEV_DEL, VDPA_CMD_DEV_GET, /* can dump */ VDPA_CMD_DEV_CONFIG_GET, /* can dump */ + VDPA_CMD_DEV_VSTATS_GET, }; enum vdpa_attr { @@ -46,6 +47,11 @@ enum vdpa_attr { VDPA_ATTR_DEV_NEGOTIATED_FEATURES, /* u64 */ VDPA_ATTR_DEV_MGMTDEV_MAX_VQS, /* u32 */ VDPA_ATTR_DEV_SUPPORTED_FEATURES, /* u64 */ + + VDPA_ATTR_DEV_QUEUE_INDEX, /* u32 */ + VDPA_ATTR_DEV_VENDOR_ATTR_NAME, /* string */ + VDPA_ATTR_DEV_VENDOR_ATTR_VALUE, /* u64 */ + /* new attributes must be added above here */ VDPA_ATTR_MAX, }; -- cgit v1.2.3 From 175d493c3c3e09a3abaa843068fae0f0ad42c47e Mon Sep 17 00:00:00 2001 From: Gautam Dawar Date: Wed, 30 Mar 2022 23:33:41 +0530 Subject: vhost: move the backend feature bits to vhost_types.h We should store feature bits in vhost_types.h as what has been done for e.g VHOST_F_LOG_ALL. Signed-off-by: Jason Wang Signed-off-by: Gautam Dawar Message-Id: <20220330180436.24644-2-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/vhost.h | 5 ----- include/uapi/linux/vhost_types.h | 5 +++++ 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index 5d99e7c242a2..8f7b4a95d6f9 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -89,11 +89,6 @@ /* Set or get vhost backend capability */ -/* Use message type V2 */ -#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 -/* IOTLB can accept batching hints */ -#define VHOST_BACKEND_F_IOTLB_BATCH 0x2 - #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64) #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64) diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h index f7f6a3a28977..76ee7016c501 100644 --- a/include/uapi/linux/vhost_types.h +++ b/include/uapi/linux/vhost_types.h @@ -153,4 +153,9 @@ struct vhost_vdpa_iova_range { /* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ #define VHOST_NET_F_VIRTIO_NET_HDR 27 +/* Use message type V2 */ +#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 +/* IOTLB can accept batching hints */ +#define VHOST_BACKEND_F_IOTLB_BATCH 0x2 + #endif -- cgit v1.2.3 From 91233ad711866f4e375742d84ef3ed6aab9daa96 Mon Sep 17 00:00:00 2001 From: Gautam Dawar Date: Wed, 30 Mar 2022 23:33:49 +0530 Subject: vhost: support ASID in IOTLB API This patches allows userspace to send ASID based IOTLB message to vhost. This idea is to use the reserved u32 field in the existing V2 IOTLB message. Vhost device should advertise this capability via VHOST_BACKEND_F_IOTLB_ASID backend feature. Signed-off-by: Jason Wang Signed-off-by: Gautam Dawar Message-Id: <20220330180436.24644-10-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/vhost_types.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h index 76ee7016c501..634cee485abb 100644 --- a/include/uapi/linux/vhost_types.h +++ b/include/uapi/linux/vhost_types.h @@ -87,7 +87,7 @@ struct vhost_msg { struct vhost_msg_v2 { __u32 type; - __u32 reserved; + __u32 asid; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; @@ -157,5 +157,9 @@ struct vhost_vdpa_iova_range { #define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 /* IOTLB can accept batching hints */ #define VHOST_BACKEND_F_IOTLB_BATCH 0x2 +/* IOTLB can accept address space identifier through V2 type of IOTLB + * message + */ +#define VHOST_BACKEND_F_IOTLB_ASID 0x3 #endif -- cgit v1.2.3 From 3ace88bd37436abc84906312146fe5158a469142 Mon Sep 17 00:00:00 2001 From: Gautam Dawar Date: Wed, 30 Mar 2022 23:33:51 +0530 Subject: vhost-vdpa: introduce uAPI to get the number of virtqueue groups Follows the vDPA support for multiple address spaces, this patch introduce uAPI for the userspace to know the number of virtqueue groups supported by the vDPA device. Signed-off-by: Jason Wang Signed-off-by: Gautam Dawar Message-Id: <20220330180436.24644-12-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/vhost.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index 8f7b4a95d6f9..61317c61d768 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -145,11 +145,13 @@ /* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) - /* Get the config size */ #define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) /* Get the count of all virtqueues */ #define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) +/* Get the number of virtqueue groups. */ +#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) + #endif -- cgit v1.2.3 From a0c95f201170bd559737d3cdc8a950aea62f29c6 Mon Sep 17 00:00:00 2001 From: Gautam Dawar Date: Wed, 30 Mar 2022 23:33:52 +0530 Subject: vhost-vdpa: introduce uAPI to get the number of address spaces This patch introduces the uAPI for getting the number of address spaces supported by this vDPA device. Signed-off-by: Jason Wang Signed-off-by: Gautam Dawar Message-Id: <20220330180436.24644-13-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/vhost.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index 61317c61d768..51322008901a 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -154,4 +154,6 @@ /* Get the number of virtqueue groups. */ #define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) +/* Get the number of address spaces. */ +#define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int) #endif -- cgit v1.2.3 From 2d1fcb7758e49fd9caf150f3c70804b95b2ce80c Mon Sep 17 00:00:00 2001 From: Gautam Dawar Date: Wed, 30 Mar 2022 23:33:53 +0530 Subject: vhost-vdpa: uAPI to get virtqueue group id Follows the support for virtqueue group in vDPA. This patches introduces uAPI to get the virtqueue group ID for a specific virtqueue in vhost-vdpa. Signed-off-by: Jason Wang Signed-off-by: Gautam Dawar Message-Id: <20220330180436.24644-14-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/vhost.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index 51322008901a..668914c87f74 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -156,4 +156,12 @@ /* Get the number of address spaces. */ #define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int) + +/* Get the group for a virtqueue: read index, write group in num, + * The virtqueue index is stored in the index field of + * vhost_vring_state. The group for this specific virtqueue is + * returned via num field of vhost_vring_state. + */ +#define VHOST_VDPA_GET_VRING_GROUP _IOWR(VHOST_VIRTIO, 0x7B, \ + struct vhost_vring_state) #endif -- cgit v1.2.3 From 84d7c8fd3aade2fe79313003ed06ede431ec2a6d Mon Sep 17 00:00:00 2001 From: Gautam Dawar Date: Wed, 30 Mar 2022 23:33:54 +0530 Subject: vhost-vdpa: introduce uAPI to set group ASID Follows the vDPA support for associating ASID to a specific virtqueue group. This patch adds a uAPI to support setting them from userspace. Signed-off-by: Jason Wang Signed-off-by: Gautam Dawar Message-Id: <20220330180436.24644-15-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/vhost.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index 668914c87f74..cab645d4a645 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -164,4 +164,11 @@ */ #define VHOST_VDPA_GET_VRING_GROUP _IOWR(VHOST_VIRTIO, 0x7B, \ struct vhost_vring_state) +/* Set the ASID for a virtqueue group. The group index is stored in + * the index field of vhost_vring_state, the ASID associated with this + * group is stored at num field of vhost_vring_state. + */ +#define VHOST_VDPA_SET_GROUP_ASID _IOW(VHOST_VIRTIO, 0x7C, \ + struct vhost_vring_state) + #endif -- cgit v1.2.3 From 662ce1dc9caf493c309200edbe38d186f1ea20d0 Mon Sep 17 00:00:00 2001 From: Yang Yang Date: Wed, 1 Jun 2022 15:55:25 -0700 Subject: delayacct: track delays from write-protect copy Delay accounting does not track the delay of write-protect copy. When tasks trigger many write-protect copys(include COW and unsharing of anonymous pages[1]), it may spend a amount of time waiting for them. To get the delay of tasks in write-protect copy, could help users to evaluate the impact of using KSM or fork() or GUP. Also update tools/accounting/getdelays.c: / # ./getdelays -dl -p 231 print delayacct stats ON listen forever PID 231 CPU count real total virtual total delay total delay average 6247 1859000000 2154070021 1674255063 0.268ms IO count delay total delay average 0 0 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 0 0 0ms COMPACT count delay total delay average 3 72758 0ms WPCOPY count delay total delay average 3635 271567604 0ms [1] commit 31cc5bc4af70("mm: support GUP-triggered unsharing of anonymous pages") Link: https://lkml.kernel.org/r/20220409014342.2505532-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang Reviewed-by: David Hildenbrand Reviewed-by: Jiang Xuexin Reviewed-by: Ran Xiaokai Reviewed-by: wangyong Cc: Jonathan Corbet Cc: Balbir Singh Cc: Mike Kravetz Cc: Stephen Rothwell Signed-off-by: Andrew Morton --- include/uapi/linux/taskstats.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/taskstats.h b/include/uapi/linux/taskstats.h index 736154171489..a7f5b11a8f1b 100644 --- a/include/uapi/linux/taskstats.h +++ b/include/uapi/linux/taskstats.h @@ -34,7 +34,7 @@ */ -#define TASKSTATS_VERSION 12 +#define TASKSTATS_VERSION 13 #define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN * in linux/sched.h */ @@ -194,6 +194,10 @@ struct taskstats { __u64 ac_exe_dev; /* program binary device ID */ __u64 ac_exe_inode; /* program binary inode number */ /* v12 end */ + + /* v13: Delay waiting for write-protect copy */ + __u64 wpcopy_count; + __u64 wpcopy_delay_total; }; -- cgit v1.2.3 From 8d3398ba2a0d1e25690f830192b7834acab003ec Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 31 May 2022 11:43:45 +0200 Subject: socket: Don't use u8 type in uapi socket.h Use plain 255 instead, which also avoid introducing an additional header dependency on Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior") Signed-off-by: Tobias Klauser Link: https://lore.kernel.org/r/20220531094345.13801-1-tklauser@distanz.ch Signed-off-by: Jakub Kicinski --- include/uapi/linux/socket.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h index 51d6bb2f6765..d3fcd3b5ec53 100644 --- a/include/uapi/linux/socket.h +++ b/include/uapi/linux/socket.h @@ -31,7 +31,7 @@ struct __kernel_sockaddr_storage { #define SOCK_BUF_LOCK_MASK (SOCK_SNDBUF_LOCK | SOCK_RCVBUF_LOCK) -#define SOCK_TXREHASH_DEFAULT ((u8)-1) +#define SOCK_TXREHASH_DEFAULT 255 #define SOCK_TXREHASH_DISABLED 0 #define SOCK_TXREHASH_ENABLED 1 -- cgit v1.2.3 From 8cc5b032240ae5220b62c689c20459d3e1825b2d Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Wed, 1 Jun 2022 01:00:17 +0000 Subject: binder: fix sender_euid type in uapi header The {pid,uid}_t fields of struct binder_transaction were recently replaced to use kernel types in commit 169adc2b6b3c ("android/binder.h: add linux/android/binder(fs).h to UAPI compile-test coverage"). However, using __kernel_uid_t here breaks backwards compatibility in architectures using 16-bits for this type, since glibc and some others still expect a 32-bit uid_t. Instead, let's use __kernel_uid32_t which avoids this compatibility problem. Fixes: 169adc2b6b3c ("android/binder.h: add linux/android/binder(fs).h to UAPI compile-test coverage") Reported-by: Christopher Ferris Signed-off-by: Carlos Llamas Acked-by: Todd Kjos Signed-off-by: Arnd Bergmann --- include/uapi/linux/android/binder.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index 11157fae8a8e..688bcdaeed53 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -289,7 +289,7 @@ struct binder_transaction_data { /* General information about the transaction. */ __u32 flags; __kernel_pid_t sender_pid; - __kernel_uid_t sender_euid; + __kernel_uid32_t sender_euid; binder_size_t data_size; /* number of bytes of data */ binder_size_t offsets_size; /* number of bytes of offsets */ -- cgit v1.2.3 From 08145b087e4481458f6075f3af58021a3cf8a940 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 31 May 2022 18:04:10 +0800 Subject: LoongArch: Add ELF-related definitions Add ELF-related definitions for LoongArch, including: EM_LOONGARCH, KEXEC_ARCH_LOONGARCH, AUDIT_ARCH_LOONGARCH32, AUDIT_ARCH_LOONGARCH64 and NT_LOONGARCH_*. Reviewed-by: WANG Xuerui Reviewed-by: Jiaxun Yang Signed-off-by: Huacai Chen --- include/uapi/linux/audit.h | 2 ++ include/uapi/linux/elf-em.h | 1 + include/uapi/linux/elf.h | 5 +++++ include/uapi/linux/kexec.h | 1 + 4 files changed, 9 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 8eda133ca4c1..7c1dc818b1d5 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -439,6 +439,8 @@ enum { #define AUDIT_ARCH_UNICORE (EM_UNICORE|__AUDIT_ARCH_LE) #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_XTENSA (EM_XTENSA) +#define AUDIT_ARCH_LOONGARCH32 (EM_LOONGARCH|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_LOONGARCH64 (EM_LOONGARCH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_PERM_EXEC 1 #define AUDIT_PERM_WRITE 2 diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h index f47e853546fa..ef38c2bc5ab7 100644 --- a/include/uapi/linux/elf-em.h +++ b/include/uapi/linux/elf-em.h @@ -51,6 +51,7 @@ #define EM_RISCV 243 /* RISC-V */ #define EM_BPF 247 /* Linux BPF - in-kernel virtual machine */ #define EM_CSKY 252 /* C-SKY */ +#define EM_LOONGARCH 258 /* LoongArch */ #define EM_FRV 0x5441 /* Fujitsu FR-V */ /* diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index c4abd09c3da9..2b9f5e9985e5 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -438,6 +438,11 @@ typedef struct elf64_shdr { #define NT_MIPS_DSP 0x800 /* MIPS DSP ASE registers */ #define NT_MIPS_FP_MODE 0x801 /* MIPS floating-point mode */ #define NT_MIPS_MSA 0x802 /* MIPS SIMD registers */ +#define NT_LOONGARCH_CPUCFG 0xa00 /* LoongArch CPU config registers */ +#define NT_LOONGARCH_CSR 0xa01 /* LoongArch control and status registers */ +#define NT_LOONGARCH_LSX 0xa02 /* LoongArch Loongson SIMD Extension registers */ +#define NT_LOONGARCH_LASX 0xa03 /* LoongArch Loongson Advanced SIMD Extension registers */ +#define NT_LOONGARCH_LBT 0xa04 /* LoongArch Loongson Binary Translation registers */ /* Note types with note name "GNU" */ #define NT_GNU_PROPERTY_TYPE_0 5 diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h index fb7e2ef60825..981016e05cfa 100644 --- a/include/uapi/linux/kexec.h +++ b/include/uapi/linux/kexec.h @@ -43,6 +43,7 @@ #define KEXEC_ARCH_MIPS ( 8 << 16) #define KEXEC_ARCH_AARCH64 (183 << 16) #define KEXEC_ARCH_RISCV (243 << 16) +#define KEXEC_ARCH_LOONGARCH (258 << 16) /* The artificial cap on the number of segments passed to kexec_load. */ #define KEXEC_SEGMENT_MAX 16 -- cgit v1.2.3 From b489a6e5871690735752f8875f411e4d0cd8e5df Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Wed, 8 Jun 2022 18:34:25 +0300 Subject: tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX To embrace possible future optimizations of TLS, rename zerocopy sendfile definitions to more generic ones: * setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO * sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX RO stands for readonly and emphasizes that the application shouldn't modify the data being transmitted with zerocopy to avoid potential disconnection. Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()") Signed-off-by: Maxim Mikityanskiy Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/tls.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index ac39328eabe7..bb8f80812b0b 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -39,7 +39,7 @@ /* TLS socket options */ #define TLS_TX 1 /* Set transmit parameters */ #define TLS_RX 2 /* Set receive parameters */ -#define TLS_TX_ZEROCOPY_SENDFILE 3 /* transmit zerocopy sendfile */ +#define TLS_TX_ZEROCOPY_RO 3 /* TX zerocopy (only sendfile now) */ /* Supported versions */ #define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) @@ -161,7 +161,7 @@ enum { TLS_INFO_CIPHER, TLS_INFO_TXCONF, TLS_INFO_RXCONF, - TLS_INFO_ZC_SENDFILE, + TLS_INFO_ZC_RO_TX, __TLS_INFO_MAX, }; #define TLS_INFO_MAX (__TLS_INFO_MAX - 1) -- cgit v1.2.3 From d884b6498d2f022098502e106d5a45ab635f2e9a Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Tue, 14 Jun 2022 17:51:18 +0100 Subject: io_uring: remove IORING_CLOSE_FD_AND_FILE_SLOT This partially reverts a7c41b4687f5902af70cd559806990930c8a307b Even though IORING_CLOSE_FD_AND_FILE_SLOT might save cycles for some users, but it tries to do two things at a time and it's not clear how to handle errors and what to return in a single result field when one part fails and another completes well. Kill it for now. Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/837c745019b3795941eee4fcfd7de697886d645b.1655224415.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- include/uapi/linux/io_uring.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index 776e0278f9dd..53e7dae92e42 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -47,7 +47,6 @@ struct io_uring_sqe { __u32 unlink_flags; __u32 hardlink_flags; __u32 xattr_flags; - __u32 close_flags; }; __u64 user_data; /* data to be passed back at completion time */ /* pack this to avoid bogus arm OABI complaints */ @@ -259,11 +258,6 @@ enum io_uring_op { */ #define IORING_ACCEPT_MULTISHOT (1U << 0) -/* - * close flags, store in sqe->close_flags - */ -#define IORING_CLOSE_FD_AND_FILE_SLOT (1U << 0) - /* * IO completion data structure (Completion Queue Entry) */ -- cgit v1.2.3