From 5037a00992e5fcb3d8509964313565a3dab6697c Mon Sep 17 00:00:00 2001 From: Sunil Dutt Date: Thu, 25 Jan 2018 17:13:37 +0200 Subject: nl80211: Introduce scan flags to emphasize requested scan behavior This commit defines new scan flags (LOW_SPAN, LOW_POWER, HIGH_LATENCY) to emphasize the requested scan behavior for the driver. These flags are optional and are mutually exclusive. The implementation of the respective functionality can be driver/hardware specific. These flags can be used to control the compromise between how long a scan takes, how much power it uses, and high accurate/complete the scan is in finding the BSSs. Signed-off-by: Sunil Dutt Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c587a61c32bf..6f60503fa617 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4945,6 +4945,9 @@ enum nl80211_feature_flags { * probe request tx deferral and suppression * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL * value in %NL80211_ATTR_USE_MFP. + * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. + * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. + * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4972,6 +4975,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, NL80211_EXT_FEATURE_MFP_OPTIONAL, + NL80211_EXT_FEATURE_LOW_SPAN_SCAN, + NL80211_EXT_FEATURE_LOW_POWER_SCAN, + NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -5032,6 +5038,10 @@ enum nl80211_timeout_reason { * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN * requests. * + * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and + * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only + * one of them can be used in the request. + * * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured @@ -5059,7 +5069,20 @@ enum nl80211_timeout_reason { * and suppression (if it has received a broadcast Probe Response frame, * Beacon frame or FILS Discovery frame from an AP that the STA considers * a suitable candidate for (re-)association - suitable in terms of - * SSID and/or RSSI + * SSID and/or RSSI. + * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to + * accomplish the scan. Thus, this flag intends the driver to perform the + * scan request with lesser span/duration. It is specific to the driver + * implementations on how this is accomplished. Scan accuracy may get + * impacted with this flag. + * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume + * optimal possible power. Drivers can resort to their specific means to + * optimize the power. Scan accuracy may get impacted with this flag. + * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan + * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum + * possible scan results. This flag hints the driver to use the best + * possible scan configuration to improve the accuracy in scanning. + * Latency and power use may get impacted with this flag. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -5070,6 +5093,9 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, + NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, + NL80211_SCAN_FLAG_LOW_POWER = 1<<9, + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, }; /** -- cgit v1.2.3 From 40cbfa90218bc570a7959b436b9d48a18c361041 Mon Sep 17 00:00:00 2001 From: Srinivas Dasari Date: Thu, 25 Jan 2018 17:13:38 +0200 Subject: cfg80211/nl80211: Optional authentication offload to userspace This interface allows the host driver to offload the authentication to user space. This is exclusively defined for host drivers that do not define separate commands for authentication and association, but rely on userspace SME (e.g., in wpa_supplicant for the ~WPA_DRIVER_FLAGS_SME case) for the authentication to happen. This can be used to implement SAE without full implementation in the kernel/firmware while still being able to use NL80211_CMD_CONNECT with driver-based BSS selection. Host driver sends NL80211_CMD_EXTERNAL_AUTH event to start/abort authentication to the port on which connect is triggered and status of authentication is further indicated by user space to host driver through the same command response interface. User space entities advertise this capability through the NL80211_ATTR_EXTERNAL_AUTH_SUPP flag in the NL80211_CMD_CONNECT request. Host drivers shall look at this capability to offload the authentication. Signed-off-by: Srinivas Dasari Signed-off-by: Jouni Malinen [add socket connection ownership check] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 47 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6f60503fa617..c2342456cf16 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -992,6 +992,27 @@ * * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. * + * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host + * drivers that do not define separate commands for authentication and + * association, but rely on user space for the authentication to happen. + * This interface acts both as the event request (driver to user space) + * to trigger the authentication and command response (userspace to + * driver) to indicate the authentication status. + * + * User space uses the %NL80211_CMD_CONNECT command to the host driver to + * trigger a connection. The host driver selects a BSS and further uses + * this interface to offload only the authentication part to the user + * space. Authentication frames are passed between the driver and user + * space through the %NL80211_CMD_FRAME interface. Host driver proceeds + * further with the association after getting successful authentication + * status. User space indicates the authentication status through + * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH + * command interface. + * + * Host driver reports this status on an authentication failure to the + * user space through the connect result as the user space would have + * initiated the connection through the connect request. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1198,6 +1219,8 @@ enum nl80211_commands { NL80211_CMD_RELOAD_REGDB, + NL80211_CMD_EXTERNAL_AUTH, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2153,6 +2176,16 @@ enum nl80211_commands { * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) * + * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external + * authentication operation (u32 attribute with an + * &enum nl80211_external_auth_action value). This is used with the + * &NL80211_CMD_EXTERNAL_AUTH request event. + * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user + * space supports external authentication. This attribute shall be used + * only with %NL80211_CMD_CONNECT request. The driver may offload + * authentication processing to user space if this capability is indicated + * in NL80211_CMD_CONNECT requests from the user space. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2579,6 +2612,9 @@ enum nl80211_attrs { NL80211_ATTR_PMKR0_NAME, NL80211_ATTR_PORT_AUTHORIZED, + NL80211_ATTR_EXTERNAL_AUTH_ACTION, + NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -5495,4 +5531,15 @@ enum nl80211_nan_match_attributes { NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 }; +/** + * nl80211_external_auth_action - Action to perform with external + * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. + * @NL80211_EXTERNAL_AUTH_START: Start the authentication. + * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. + */ +enum nl80211_external_auth_action { + NL80211_EXTERNAL_AUTH_START, + NL80211_EXTERNAL_AUTH_ABORT, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 466b9936bf93b7ec3bce1dcd493262ff0a8a4f44 Mon Sep 17 00:00:00 2001 From: "tamizhr@codeaurora.org" Date: Wed, 31 Jan 2018 16:24:49 +0530 Subject: cfg80211: Add support to notify station's opmode change to userspace ht/vht action frames will be sent to AP from station to notify change of its ht/vht opmode(max bandwidth, smps mode or nss) modified values. Currently these valuse used by driver/firmware for rate control algorithm. This patch introduces NL80211_CMD_STA_OPMODE_CHANGED command to notify those modified/current supported values(max bandwidth, smps mode, max nss) to userspace application. This will be useful for the application like steering, which closely monitoring station's capability changes. Since the application has taken these values during station association. Signed-off-by: Tamizh chelvam Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c2342456cf16..ca3d5a613fc0 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1013,6 +1013,11 @@ * user space through the connect result as the user space would have * initiated the connection through the connect request. * + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's + * ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE, + * &NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its + * address(specified in &NL80211_ATTR_MAC). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1221,6 +1226,8 @@ enum nl80211_commands { NL80211_CMD_EXTERNAL_AUTH, + NL80211_CMD_STA_OPMODE_CHANGED, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2186,6 +2193,9 @@ enum nl80211_commands { * authentication processing to user space if this capability is indicated * in NL80211_CMD_CONNECT requests from the user space. * + * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this + * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2615,6 +2625,8 @@ enum nl80211_attrs { NL80211_ATTR_EXTERNAL_AUTH_ACTION, NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, + NL80211_ATTR_NSS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 65074d43fc77bcae32776724b7fa2696923c78e4 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Wed, 6 Dec 2017 14:45:13 -0800 Subject: perf/core: Prepare perf_event.h for new types: 'perf_kprobe' and 'perf_uprobe' Two new perf types, perf_kprobe and perf_uprobe, will be added to allow creating [k,u]probe with perf_event_open. These [k,u]probe are associated with the file decriptor created by perf_event_open(), thus are easy to clean when the file descriptor is destroyed. kprobe_func and uprobe_path are added to union config1 for pointers to function name for kprobe or binary path for uprobe. kprobe_addr and probe_offset are added to union config2 for kernel address (when kprobe_func is NULL), or [k,u]probe offset. Signed-off-by: Song Liu Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Yonghong Song Reviewed-by: Josef Bacik Acked-by: Alexei Starovoitov Cc: Cc: Cc: Cc: Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20171206224518.3598254-4-songliubraving@fb.com Signed-off-by: Ingo Molnar --- include/uapi/linux/perf_event.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index c77c9a2ebbbb..5d49cfc509e7 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -380,10 +380,14 @@ struct perf_event_attr { __u32 bp_type; union { __u64 bp_addr; + __u64 kprobe_func; /* for perf_kprobe */ + __u64 uprobe_path; /* for perf_uprobe */ __u64 config1; /* extension of config */ }; union { __u64 bp_len; + __u64 kprobe_addr; /* when kprobe_func == NULL */ + __u64 probe_offset; /* for perf_[k,u]probe */ __u64 config2; /* extension of config1 */ }; __u64 branch_sample_type; /* enum perf_branch_sample_type */ -- cgit v1.2.3 From e1603b6effe177210701d3d7132d1b68e7bd2c93 Mon Sep 17 00:00:00 2001 From: Kirill Tkhai Date: Fri, 9 Feb 2018 18:04:54 +0300 Subject: inotify: Extend ioctl to allow to request id of new watch descriptor Watch descriptor is id of the watch created by inotify_add_watch(). It is allocated in inotify_add_to_idr(), and takes the numbers starting from 1. Every new inotify watch obtains next available number (usually, old + 1), as served by idr_alloc_cyclic(). CRIU (Checkpoint/Restore In Userspace) project supports inotify files, and restores watched descriptors with the same numbers, they had before dump. Since there was no kernel support, we had to use cycle to add a watch with specific descriptor id: while (1) { int wd; wd = inotify_add_watch(inotify_fd, path, mask); if (wd < 0) { break; } else if (wd == desired_wd_id) { ret = 0; break; } inotify_rm_watch(inotify_fd, wd); } (You may find the actual code at the below link: https://github.com/checkpoint-restore/criu/blob/v3.7/criu/fsnotify.c#L577) The cycle is suboptiomal and very expensive, but since there is no better kernel support, it was the only way to restore that. Happily, we had met mostly descriptors with small id, and this approach had worked somehow. But recent time containers with inotify with big watch descriptors begun to come, and this way stopped to work at all. When descriptor id is something about 0x34d71d6, the restoring process spins in busy loop for a long time, and the restore hungs and delay of migration from node to node could easily be watched. This patch aims to solve this problem. It introduces new ioctl INOTIFY_IOC_SETNEXTWD, which allows to request the number of next created watch descriptor from userspace. It simply calls idr_set_cursor() primitive to populate idr::idr_next, so that next idr_alloc_cyclic() allocation will return this id, if it is not occupied. This is the way which is used to restore some other resources from userspace. For example, /proc/sys/kernel/ns_last_pid works the same for task pids. The new code is under CONFIG_CHECKPOINT_RESTORE #define, so small system may exclude it. v2: Use INT_MAX instead of custom definition of max id, as IDR subsystem guarantees id is between 0 and INT_MAX. CC: Jan Kara CC: Matthew Wilcox CC: Andrew Morton CC: Amir Goldstein Signed-off-by: Kirill Tkhai Reviewed-by: Cyrill Gorcunov Reviewed-by: Matthew Wilcox Reviewed-by: Andrew Morton Signed-off-by: Jan Kara --- include/uapi/linux/inotify.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/inotify.h b/include/uapi/linux/inotify.h index 5474461683db..4800bf2a531d 100644 --- a/include/uapi/linux/inotify.h +++ b/include/uapi/linux/inotify.h @@ -71,5 +71,13 @@ struct inotify_event { #define IN_CLOEXEC O_CLOEXEC #define IN_NONBLOCK O_NONBLOCK +/* + * ioctl numbers: inotify uses 'I' prefix for all ioctls, + * except historical FIONREAD, which is based on 'T'. + * + * INOTIFY_IOC_SETNEXTWD: set desired number of next created + * watch descriptor. + */ +#define INOTIFY_IOC_SETNEXTWD _IOW('I', 0, __s32) #endif /* _UAPI_LINUX_INOTIFY_H */ -- cgit v1.2.3 From ab15d248cc96d12c928a69d3485a98d223c607ae Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 7 Feb 2018 09:05:46 -0500 Subject: media: include/(uapi/)media: add SPDX license info Replace the old license information with the corresponding SPDX license for those headers that I authored. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/cec-funcs.h | 29 ----------------------------- include/uapi/linux/cec.h | 29 ----------------------------- 2 files changed, 58 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/cec-funcs.h b/include/uapi/linux/cec-funcs.h index 28e8a2a86e16..8997d5068c08 100644 --- a/include/uapi/linux/cec-funcs.h +++ b/include/uapi/linux/cec-funcs.h @@ -3,35 +3,6 @@ * cec - HDMI Consumer Electronics Control message functions * * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - * - * This program is free software; you may redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * Alternatively you can redistribute this file under the terms of the - * BSD license as stated below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. The names of its contributors may not be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. */ #ifndef _CEC_UAPI_FUNCS_H diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index b51fbe1941a7..20fe091b7e96 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -3,35 +3,6 @@ * cec - HDMI Consumer Electronics Control public header * * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - * - * This program is free software; you may redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * Alternatively you can redistribute this file under the terms of the - * BSD license as stated below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. The names of its contributors may not be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. */ #ifndef _CEC_UAPI_H -- cgit v1.2.3 From 01883eda72bd3f0a6c81447e4f223de14033fd9d Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Thu, 15 Feb 2018 10:49:35 -0800 Subject: rds: support for zcopy completion notification RDS removes a datagram (rds_message) from the retransmit queue when an ACK is received. The ACK indicates that the receiver has queued the RDS datagram, so that the sender can safely forget the datagram. When all references to the rds_message are quiesced, rds_message_purge is called to release resources used by the rds_message If the datagram to be removed had pinned pages set up, add an entry to the rs->rs_znotify_queue so that the notifcation will be sent up via rds_rm_zerocopy_callback() when the rds_message is eventually freed by rds_message_purge. rds_rm_zerocopy_callback() attempts to batch the number of cookies sent with each notification to a max of SO_EE_ORIGIN_MAX_ZCOOKIES. This is achieved by checking the tail skb in the sk_error_queue: if this has room for one more cookie, the cookie from the current notification is added; else a new skb is added to the sk_error_queue. Every invocation of rds_rm_zerocopy_callback() will trigger a ->sk_error_report to notify the application. Signed-off-by: Sowmini Varadhan Acked-by: Santosh Shilimkar Acked-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/uapi/linux/errqueue.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h index dc64cfaf13da..28812eda4209 100644 --- a/include/uapi/linux/errqueue.h +++ b/include/uapi/linux/errqueue.h @@ -20,11 +20,13 @@ struct sock_extended_err { #define SO_EE_ORIGIN_ICMP6 3 #define SO_EE_ORIGIN_TXSTATUS 4 #define SO_EE_ORIGIN_ZEROCOPY 5 +#define SO_EE_ORIGIN_ZCOOKIE 6 #define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS #define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) #define SO_EE_CODE_ZEROCOPY_COPIED 1 +#define SO_EE_ORIGIN_MAX_ZCOOKIES 8 /** * struct scm_timestamping - timestamps exposed through cmsg -- cgit v1.2.3 From 0cebaccef3acbdfbc2d85880a2efb765d2f4e2e3 Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Thu, 15 Feb 2018 10:49:36 -0800 Subject: rds: zerocopy Tx support. If the MSG_ZEROCOPY flag is specified with rds_sendmsg(), and, if the SO_ZEROCOPY socket option has been set on the PF_RDS socket, application pages sent down with rds_sendmsg() are pinned. The pinning uses the accounting infrastructure added by Commit a91dbff551a6 ("sock: ulimit on MSG_ZEROCOPY pages") The payload bytes in the message may not be modified for the duration that the message has been pinned. A multi-threaded application using this infrastructure may thus need to be notified about send-completion so that it can free/reuse the buffers passed to rds_sendmsg(). Notification of send-completion will identify each message-buffer by a cookie that the application must specify as ancillary data to rds_sendmsg(). The ancillary data in this case has cmsg_level == SOL_RDS and cmsg_type == RDS_CMSG_ZCOPY_COOKIE. Signed-off-by: Sowmini Varadhan Acked-by: Santosh Shilimkar Acked-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/uapi/linux/rds.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rds.h b/include/uapi/linux/rds.h index e71d4491f225..12e3bca32cad 100644 --- a/include/uapi/linux/rds.h +++ b/include/uapi/linux/rds.h @@ -103,6 +103,7 @@ #define RDS_CMSG_MASKED_ATOMIC_FADD 8 #define RDS_CMSG_MASKED_ATOMIC_CSWP 9 #define RDS_CMSG_RXPATH_LATENCY 11 +#define RDS_CMSG_ZCOPY_COOKIE 12 #define RDS_INFO_FIRST 10000 #define RDS_INFO_COUNTERS 10000 -- cgit v1.2.3 From 1ec010e705934c8acbe7dbf31afc81e60e3d828b Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 16 Feb 2018 11:03:07 +0100 Subject: tun: export flags, uid, gid, queue information over netlink Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- include/uapi/linux/if_link.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 6d9447700e18..11d0c0ea2bfa 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -941,4 +941,22 @@ enum { IFLA_EVENT_BONDING_OPTIONS, /* change in bonding options */ }; +/* tun section */ + +enum { + IFLA_TUN_UNSPEC, + IFLA_TUN_OWNER, + IFLA_TUN_GROUP, + IFLA_TUN_TYPE, + IFLA_TUN_PI, + IFLA_TUN_VNET_HDR, + IFLA_TUN_PERSIST, + IFLA_TUN_MULTI_QUEUE, + IFLA_TUN_NUM_QUEUES, + IFLA_TUN_NUM_DISABLED_QUEUES, + __IFLA_TUN_MAX, +}; + +#define IFLA_TUN_MAX (__IFLA_TUN_MAX - 1) + #endif /* _UAPI_LINUX_IF_LINK_H */ -- cgit v1.2.3 From c4b50cd31d25c3d17886ffc47ca4a9a12c6dc9bf Mon Sep 17 00:00:00 2001 From: Venkateswara Naralasetty Date: Tue, 13 Feb 2018 11:03:06 +0530 Subject: cfg80211: send ack_signal to user in probe client response This patch provides support to get ack signal in probe client response and in station info from user. Signed-off-by: Venkateswara Naralasetty [squash in compilation fixes] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ca3d5a613fc0..c13c84304be3 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2626,6 +2626,7 @@ enum nl80211_attrs { NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, NL80211_ATTR_NSS, + NL80211_ATTR_ACK_SIGNAL, /* add attributes here, update the policy in nl80211.c */ @@ -2947,6 +2948,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames * received from the station (u64, usec) * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2985,6 +2987,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_TID_STATS, NL80211_STA_INFO_RX_DURATION, NL80211_STA_INFO_PAD, + NL80211_STA_INFO_ACK_SIGNAL, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, -- cgit v1.2.3 From ccc007e4a746bb592d3e72106f00241f81d51410 Mon Sep 17 00:00:00 2001 From: Eyal Birger Date: Thu, 15 Feb 2018 19:42:43 +0200 Subject: net: sched: add em_ipt ematch for calling xtables matches The commit a new tc ematch for using netfilter xtable matches. This allows early classification as well as mirroning/redirecting traffic based on logic implemented in netfilter extensions. Current supported use case is classification based on the incoming IPSec state used during decpsulation using the 'policy' iptables extension (xt_policy). The module dynamically fetches the netfilter match module and calls it using a fake xt_action_param structure based on validated userspace provided parameters. As the xt_policy match does not access skb->data, no skb modifications are needed on match. Signed-off-by: Eyal Birger Signed-off-by: David S. Miller --- include/uapi/linux/pkt_cls.h | 3 ++- include/uapi/linux/tc_ematch/tc_em_ipt.h | 20 ++++++++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/tc_ematch/tc_em_ipt.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 46c506615f4a..7cafb26df555 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -555,7 +555,8 @@ enum { #define TCF_EM_VLAN 6 #define TCF_EM_CANID 7 #define TCF_EM_IPSET 8 -#define TCF_EM_MAX 8 +#define TCF_EM_IPT 9 +#define TCF_EM_MAX 9 enum { TCF_EM_PROG_TC diff --git a/include/uapi/linux/tc_ematch/tc_em_ipt.h b/include/uapi/linux/tc_ematch/tc_em_ipt.h new file mode 100644 index 000000000000..49a65530992c --- /dev/null +++ b/include/uapi/linux/tc_ematch/tc_em_ipt.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_TC_EM_IPT_H +#define __LINUX_TC_EM_IPT_H + +#include +#include + +enum { + TCA_EM_IPT_UNSPEC, + TCA_EM_IPT_HOOK, + TCA_EM_IPT_MATCH_NAME, + TCA_EM_IPT_MATCH_REVISION, + TCA_EM_IPT_NFPROTO, + TCA_EM_IPT_MATCH_DATA, + __TCA_EM_IPT_MAX +}; + +#define TCA_EM_IPT_MAX (__TCA_EM_IPT_MAX - 1) + +#endif -- cgit v1.2.3 From cac56209a66ea3b0be67aa2966b2c628b944da1e Mon Sep 17 00:00:00 2001 From: Donald Sharp Date: Tue, 20 Feb 2018 08:55:58 -0500 Subject: net: Allow a rule to track originating protocol Allow a rule that is being added/deleted/modified or dumped to contain the originating protocol's id. The protocol is handled just like a routes originating protocol is. This is especially useful because there is starting to be a plethora of different user space programs adding rules. Allow the vrf device to specify that the kernel is the originator of the rule created for this device. Signed-off-by: Donald Sharp Signed-off-by: David S. Miller --- include/uapi/linux/fib_rules.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 2b642bf9b5a0..925539172d5b 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -23,8 +23,8 @@ struct fib_rule_hdr { __u8 tos; __u8 table; + __u8 proto; __u8 res1; /* reserved */ - __u8 res2; /* reserved */ __u8 action; __u32 flags; -- cgit v1.2.3 From 5271a98cd8baae39bb0415f8002aa1bd331f9aa3 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 15 Feb 2018 12:55:31 -0500 Subject: media: add digital video decoder entity functions Add a new media entity function definition for digital TV decoders: MEDIA_ENT_F_DTV_DECODER Signed-off-by: Tim Harvey Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/media.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index b9b9446095e9..2f12328e260d 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -109,6 +109,11 @@ struct media_device_info { #define MEDIA_ENT_F_VID_MUX (MEDIA_ENT_F_BASE + 0x5001) #define MEDIA_ENT_F_VID_IF_BRIDGE (MEDIA_ENT_F_BASE + 0x5002) +/* + * Digital video decoder entities + */ +#define MEDIA_ENT_F_DTV_DECODER (MEDIA_ENT_F_BASE + 0x6001) + /* * Connectors */ -- cgit v1.2.3 From 4fe0de5b143762d327bfaf1d7be7c5b58041a18c Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Wed, 31 Jan 2018 19:04:15 -0600 Subject: uapi: Add 802.11 Preauthentication to if_ether This adds 0x88c7 protocol type to if_ether. Signed-off-by: Denis Kenzior Signed-off-by: Johannes Berg --- include/uapi/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index f8cb5760ea4f..54585906e50a 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -89,6 +89,7 @@ #define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ #define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ #define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ +#define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */ #define ETH_P_TIPC 0x88CA /* TIPC */ #define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */ #define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ -- cgit v1.2.3 From 5f171577b4f35b44795a73bde8cf2c49b4073925 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 24 Oct 2017 16:52:32 +0100 Subject: Drop a bunch of metag references Now that arch/metag/ has been removed, drop a bunch of metag references in various codes across the whole tree: - VM_GROWSUP and __VM_ARCH_SPECIFIC_1. - MT_METAG_* ELF note types. - METAG Kconfig dependencies (FRAME_POINTER) and ranges (MAX_STACK_SIZE_MB). - metag cases in tools (checkstack.pl, recordmcount.c, perf). Signed-off-by: James Hogan Acked-by: Steven Rostedt (VMware) Acked-by: Peter Zijlstra (Intel) Reviewed-by: Guenter Roeck Cc: Ingo Molnar Cc: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: linux-mm@kvack.org Cc: linux-metag@vger.kernel.org --- include/uapi/linux/elf.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index 3bf73fb58045..e2535d6dcec7 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -420,9 +420,6 @@ typedef struct elf64_shdr { #define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ #define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */ #define NT_ARM_SVE 0x405 /* ARM Scalable Vector Extension registers */ -#define NT_METAG_CBUF 0x500 /* Metag catch buffer registers */ -#define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */ -#define NT_METAG_TLS 0x502 /* Metag TLS pointer */ #define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */ /* Note header in a PT_NOTE section */ -- cgit v1.2.3 From 1b71af6053af1bd2f849e9fda4f71c1e3f145dcf Mon Sep 17 00:00:00 2001 From: Donald Sharp Date: Fri, 23 Feb 2018 14:01:52 -0500 Subject: net: fib_rules: Add new attribute to set protocol For ages iproute2 has used `struct rtmsg` as the ancillary header for FIB rules and in the process set the protocol value to RTPROT_BOOT. Until ca56209a66 ("net: Allow a rule to track originating protocol") the kernel rules code ignored the protocol value sent from userspace and always returned 0 in notifications. To avoid incompatibility with existing iproute2, send the protocol as a new attribute. Fixes: cac56209a66 ("net: Allow a rule to track originating protocol") Signed-off-by: Donald Sharp Signed-off-by: David S. Miller --- include/uapi/linux/fib_rules.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 925539172d5b..77d90ae38114 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -23,8 +23,8 @@ struct fib_rule_hdr { __u8 tos; __u8 table; - __u8 proto; - __u8 res1; /* reserved */ + __u8 res1; /* reserved */ + __u8 res2; /* reserved */ __u8 action; __u32 flags; @@ -58,6 +58,7 @@ enum { FRA_PAD, FRA_L3MDEV, /* iif or oif is l3mdev goto its table */ FRA_UID_RANGE, /* UID range */ + FRA_PROTOCOL, /* Originator of the rule */ __FRA_MAX }; -- cgit v1.2.3 From 0018147c964e73cb6ee0d463cad534fb4309e286 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Mon, 8 Jan 2018 12:55:23 -0500 Subject: media: v4l: doc: Clarify v4l2_mbus_fmt height definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The v4l2_mbus_fmt width and height corresponds directly with the v4l2_pix_format definitions, yet the differences in documentation make it ambiguous what to do in the event of field heights. Clarify this using the same text as is provided for the v4l2_pix_format which is explicit on the matter, and by matching the terminology of 'image height' rather than the misleading 'frame height'. Signed-off-by: Kieran Bingham Acked-by: Sakari Ailus Reviewed-by: Niklas Söderlund Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-mediabus.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 6e20de63ec59..123a231001a8 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -18,8 +18,8 @@ /** * struct v4l2_mbus_framefmt - frame format on the media bus - * @width: frame width - * @height: frame height + * @width: image width + * @height: image height * @code: data format code (from enum v4l2_mbus_pixelcode) * @field: used interlacing type (from enum v4l2_field) * @colorspace: colorspace of the data (from enum v4l2_colorspace) -- cgit v1.2.3 From 81e0989e2ff411b3bb40098730830f16f707bd42 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 5 Feb 2018 04:30:48 -0500 Subject: media: media.h: fix confusing typo in comment Subdevs are initialized with MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN, not MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/media.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index 2f12328e260d..3e8a28a5429f 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -136,7 +136,7 @@ struct media_device_info { * with the legacy v1 API.The number range is out of range by purpose: * several previously reserved numbers got excluded from this range. * - * Subdevs are initialized with MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN, + * Subdevs are initialized with MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN, * in order to preserve backward compatibility. * Drivers must change to the proper subdev type before * registering the entity. -- cgit v1.2.3 From ed3056f015de90a53127d05c34d49fe3e04675a4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 5 Feb 2018 06:19:00 -0500 Subject: media: media.h: reorganize header to make it easier to understand The media.h public header is very messy. It mixes legacy and 'new' defines and it is not easy to figure out what should and what shouldn't be used. It also contains confusing comment that are either out of date or completely uninteresting for anyone that needs to use this header. The patch groups all entity functions together, including the 'old' defines based on the old range base. The reader just wants to know about the available functions and doesn't care about what range is used. All legacy defines are moved to the end of the header, so it is easier to locate them and just ignore them. The legacy structs in the struct media_entity_desc are put under also a much more effective signal to the reader that they shouldn't be used compared to the old method of relying on '#if 1' followed by a comment. The unused MEDIA_INTF_T_ALSA_* defines are also moved to the end of the header in the legacy area. They are also dropped from intf_type() in media-entity.c. All defines are also aligned at the same tab making the header easier to read. Signed-off-by: Hans Verkuil [mchehab@s-opensource.com: removed lots of spaces before tabs; typo changes ->change ] Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/media.h | 347 +++++++++++++++++++++------------------------ 1 file changed, 164 insertions(+), 183 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index 3e8a28a5429f..c7e9a5cba24e 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -15,10 +15,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_MEDIA_H @@ -42,113 +38,66 @@ struct media_device_info { __u32 reserved[31]; }; -#define MEDIA_ENT_ID_FLAG_NEXT (1 << 31) - -/* - * Initial value to be used when a new entity is created - * Drivers should change it to something useful - */ -#define MEDIA_ENT_F_UNKNOWN 0x00000000 - /* * Base number ranges for entity functions * - * NOTE: those ranges and entity function number are phased just to - * make it easier to maintain this file. Userspace should not rely on - * the ranges to identify a group of function types, as newer - * functions can be added with any name within the full u32 range. + * NOTE: Userspace should not rely on these ranges to identify a group + * of function types, as newer functions can be added with any name within + * the full u32 range. + * + * Some older functions use the MEDIA_ENT_F_OLD_*_BASE range. Do not + * change this, this is for backwards compatibility. When adding new + * functions always use MEDIA_ENT_F_BASE. */ -#define MEDIA_ENT_F_BASE 0x00000000 -#define MEDIA_ENT_F_OLD_BASE 0x00010000 -#define MEDIA_ENT_F_OLD_SUBDEV_BASE 0x00020000 +#define MEDIA_ENT_F_BASE 0x00000000 +#define MEDIA_ENT_F_OLD_BASE 0x00010000 +#define MEDIA_ENT_F_OLD_SUBDEV_BASE 0x00020000 /* - * DVB entities + * Initial value to be used when a new entity is created + * Drivers should change it to something useful. */ -#define MEDIA_ENT_F_DTV_DEMOD (MEDIA_ENT_F_BASE + 0x00001) -#define MEDIA_ENT_F_TS_DEMUX (MEDIA_ENT_F_BASE + 0x00002) -#define MEDIA_ENT_F_DTV_CA (MEDIA_ENT_F_BASE + 0x00003) -#define MEDIA_ENT_F_DTV_NET_DECAP (MEDIA_ENT_F_BASE + 0x00004) +#define MEDIA_ENT_F_UNKNOWN MEDIA_ENT_F_BASE /* - * I/O entities + * Subdevs are initialized with MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN in order + * to preserve backward compatibility. Drivers must change to the proper + * subdev type before registering the entity. */ -#define MEDIA_ENT_F_IO_DTV (MEDIA_ENT_F_BASE + 0x01001) -#define MEDIA_ENT_F_IO_VBI (MEDIA_ENT_F_BASE + 0x01002) -#define MEDIA_ENT_F_IO_SWRADIO (MEDIA_ENT_F_BASE + 0x01003) +#define MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN MEDIA_ENT_F_OLD_SUBDEV_BASE /* - * Analog TV IF-PLL decoders - * - * It is a responsibility of the master/bridge drivers to create links - * for MEDIA_ENT_F_IF_VID_DECODER and MEDIA_ENT_F_IF_AUD_DECODER. + * DVB entity functions */ -#define MEDIA_ENT_F_IF_VID_DECODER (MEDIA_ENT_F_BASE + 0x02001) -#define MEDIA_ENT_F_IF_AUD_DECODER (MEDIA_ENT_F_BASE + 0x02002) +#define MEDIA_ENT_F_DTV_DEMOD (MEDIA_ENT_F_BASE + 0x00001) +#define MEDIA_ENT_F_TS_DEMUX (MEDIA_ENT_F_BASE + 0x00002) +#define MEDIA_ENT_F_DTV_CA (MEDIA_ENT_F_BASE + 0x00003) +#define MEDIA_ENT_F_DTV_NET_DECAP (MEDIA_ENT_F_BASE + 0x00004) /* - * Audio Entity Functions + * I/O entity functions */ -#define MEDIA_ENT_F_AUDIO_CAPTURE (MEDIA_ENT_F_BASE + 0x03001) -#define MEDIA_ENT_F_AUDIO_PLAYBACK (MEDIA_ENT_F_BASE + 0x03002) -#define MEDIA_ENT_F_AUDIO_MIXER (MEDIA_ENT_F_BASE + 0x03003) +#define MEDIA_ENT_F_IO_V4L (MEDIA_ENT_F_OLD_BASE + 1) +#define MEDIA_ENT_F_IO_DTV (MEDIA_ENT_F_BASE + 0x01001) +#define MEDIA_ENT_F_IO_VBI (MEDIA_ENT_F_BASE + 0x01002) +#define MEDIA_ENT_F_IO_SWRADIO (MEDIA_ENT_F_BASE + 0x01003) /* - * Processing entities + * Sensor functions */ -#define MEDIA_ENT_F_PROC_VIDEO_COMPOSER (MEDIA_ENT_F_BASE + 0x4001) -#define MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER (MEDIA_ENT_F_BASE + 0x4002) -#define MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV (MEDIA_ENT_F_BASE + 0x4003) -#define MEDIA_ENT_F_PROC_VIDEO_LUT (MEDIA_ENT_F_BASE + 0x4004) -#define MEDIA_ENT_F_PROC_VIDEO_SCALER (MEDIA_ENT_F_BASE + 0x4005) -#define MEDIA_ENT_F_PROC_VIDEO_STATISTICS (MEDIA_ENT_F_BASE + 0x4006) +#define MEDIA_ENT_F_CAM_SENSOR (MEDIA_ENT_F_OLD_SUBDEV_BASE + 1) +#define MEDIA_ENT_F_FLASH (MEDIA_ENT_F_OLD_SUBDEV_BASE + 2) +#define MEDIA_ENT_F_LENS (MEDIA_ENT_F_OLD_SUBDEV_BASE + 3) /* - * Switch and bridge entitites - */ -#define MEDIA_ENT_F_VID_MUX (MEDIA_ENT_F_BASE + 0x5001) -#define MEDIA_ENT_F_VID_IF_BRIDGE (MEDIA_ENT_F_BASE + 0x5002) - -/* - * Digital video decoder entities + * Video decoder functions */ +#define MEDIA_ENT_F_ATV_DECODER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 4) #define MEDIA_ENT_F_DTV_DECODER (MEDIA_ENT_F_BASE + 0x6001) /* - * Connectors - */ -/* It is a responsibility of the entity drivers to add connectors and links */ -#ifdef __KERNEL__ - /* - * For now, it should not be used in userspace, as some - * definitions may change - */ - -#define MEDIA_ENT_F_CONN_RF (MEDIA_ENT_F_BASE + 0x30001) -#define MEDIA_ENT_F_CONN_SVIDEO (MEDIA_ENT_F_BASE + 0x30002) -#define MEDIA_ENT_F_CONN_COMPOSITE (MEDIA_ENT_F_BASE + 0x30003) - -#endif - -/* - * Don't touch on those. The ranges MEDIA_ENT_F_OLD_BASE and - * MEDIA_ENT_F_OLD_SUBDEV_BASE are kept to keep backward compatibility - * with the legacy v1 API.The number range is out of range by purpose: - * several previously reserved numbers got excluded from this range. + * Digital TV, analog TV, radio and/or software defined radio tuner functions. * - * Subdevs are initialized with MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN, - * in order to preserve backward compatibility. - * Drivers must change to the proper subdev type before - * registering the entity. - */ - -#define MEDIA_ENT_F_IO_V4L (MEDIA_ENT_F_OLD_BASE + 1) - -#define MEDIA_ENT_F_CAM_SENSOR (MEDIA_ENT_F_OLD_SUBDEV_BASE + 1) -#define MEDIA_ENT_F_FLASH (MEDIA_ENT_F_OLD_SUBDEV_BASE + 2) -#define MEDIA_ENT_F_LENS (MEDIA_ENT_F_OLD_SUBDEV_BASE + 3) -#define MEDIA_ENT_F_ATV_DECODER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 4) -/* * It is a responsibility of the master/bridge drivers to add connectors * and links for MEDIA_ENT_F_TUNER. Please notice that some old tuners * may require the usage of separate I2C chips to decode analog TV signals, @@ -156,49 +105,46 @@ struct media_device_info { * On such cases, the IF-PLL staging is mapped via one or two entities: * MEDIA_ENT_F_IF_VID_DECODER and/or MEDIA_ENT_F_IF_AUD_DECODER. */ -#define MEDIA_ENT_F_TUNER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 5) +#define MEDIA_ENT_F_TUNER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 5) -#define MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN MEDIA_ENT_F_OLD_SUBDEV_BASE +/* + * Analog TV IF-PLL decoder functions + * + * It is a responsibility of the master/bridge drivers to create links + * for MEDIA_ENT_F_IF_VID_DECODER and MEDIA_ENT_F_IF_AUD_DECODER. + */ +#define MEDIA_ENT_F_IF_VID_DECODER (MEDIA_ENT_F_BASE + 0x02001) +#define MEDIA_ENT_F_IF_AUD_DECODER (MEDIA_ENT_F_BASE + 0x02002) -#if !defined(__KERNEL__) || defined(__NEED_MEDIA_LEGACY_API) +/* + * Audio entity functions + */ +#define MEDIA_ENT_F_AUDIO_CAPTURE (MEDIA_ENT_F_BASE + 0x03001) +#define MEDIA_ENT_F_AUDIO_PLAYBACK (MEDIA_ENT_F_BASE + 0x03002) +#define MEDIA_ENT_F_AUDIO_MIXER (MEDIA_ENT_F_BASE + 0x03003) /* - * Legacy symbols used to avoid userspace compilation breakages - * - * Those symbols map the entity function into types and should be - * used only on legacy programs for legacy hardware. Don't rely - * on those for MEDIA_IOC_G_TOPOLOGY. + * Processing entity functions */ -#define MEDIA_ENT_TYPE_SHIFT 16 -#define MEDIA_ENT_TYPE_MASK 0x00ff0000 -#define MEDIA_ENT_SUBTYPE_MASK 0x0000ffff - -/* End of the old subdev reserved numberspace */ -#define MEDIA_ENT_T_DEVNODE_UNKNOWN (MEDIA_ENT_T_DEVNODE | \ - MEDIA_ENT_SUBTYPE_MASK) - -#define MEDIA_ENT_T_DEVNODE MEDIA_ENT_F_OLD_BASE -#define MEDIA_ENT_T_DEVNODE_V4L MEDIA_ENT_F_IO_V4L -#define MEDIA_ENT_T_DEVNODE_FB (MEDIA_ENT_T_DEVNODE + 2) -#define MEDIA_ENT_T_DEVNODE_ALSA (MEDIA_ENT_T_DEVNODE + 3) -#define MEDIA_ENT_T_DEVNODE_DVB (MEDIA_ENT_T_DEVNODE + 4) - -#define MEDIA_ENT_T_UNKNOWN MEDIA_ENT_F_UNKNOWN -#define MEDIA_ENT_T_V4L2_VIDEO MEDIA_ENT_F_IO_V4L -#define MEDIA_ENT_T_V4L2_SUBDEV MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN -#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR MEDIA_ENT_F_CAM_SENSOR -#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH MEDIA_ENT_F_FLASH -#define MEDIA_ENT_T_V4L2_SUBDEV_LENS MEDIA_ENT_F_LENS -#define MEDIA_ENT_T_V4L2_SUBDEV_DECODER MEDIA_ENT_F_ATV_DECODER -#define MEDIA_ENT_T_V4L2_SUBDEV_TUNER MEDIA_ENT_F_TUNER +#define MEDIA_ENT_F_PROC_VIDEO_COMPOSER (MEDIA_ENT_F_BASE + 0x4001) +#define MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER (MEDIA_ENT_F_BASE + 0x4002) +#define MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV (MEDIA_ENT_F_BASE + 0x4003) +#define MEDIA_ENT_F_PROC_VIDEO_LUT (MEDIA_ENT_F_BASE + 0x4004) +#define MEDIA_ENT_F_PROC_VIDEO_SCALER (MEDIA_ENT_F_BASE + 0x4005) +#define MEDIA_ENT_F_PROC_VIDEO_STATISTICS (MEDIA_ENT_F_BASE + 0x4006) -/* Obsolete symbol for media_version, no longer used in the kernel */ -#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0) -#endif +/* + * Switch and bridge entity functions + */ +#define MEDIA_ENT_F_VID_MUX (MEDIA_ENT_F_BASE + 0x5001) +#define MEDIA_ENT_F_VID_IF_BRIDGE (MEDIA_ENT_F_BASE + 0x5002) /* Entity flags */ -#define MEDIA_ENT_FL_DEFAULT (1 << 0) -#define MEDIA_ENT_FL_CONNECTOR (1 << 1) +#define MEDIA_ENT_FL_DEFAULT (1 << 0) +#define MEDIA_ENT_FL_CONNECTOR (1 << 1) + +/* OR with the entity id value to find the next entity */ +#define MEDIA_ENT_ID_FLAG_NEXT (1 << 31) struct media_entity_desc { __u32 id; @@ -219,7 +165,7 @@ struct media_entity_desc { __u32 minor; } dev; -#if 1 +#if !defined(__KERNEL__) /* * TODO: this shouldn't have been added without * actual drivers that use this. When the first real driver @@ -230,24 +176,17 @@ struct media_entity_desc { * contain the subdevice information. In addition, struct dev * can only refer to a single device, and not to multiple (e.g. * pcm and mixer devices). - * - * So for now mark this as a to do. */ struct { __u32 card; __u32 device; __u32 subdevice; } alsa; -#endif -#if 1 /* * DEPRECATED: previous node specifications. Kept just to - * avoid breaking compilation, but media_entity_desc.dev - * should be used instead. In particular, alsa and dvb - * fields below are wrong: for all devnodes, there should - * be just major/minor inside the struct, as this is enough - * to represent any devnode, no matter what type. + * avoid breaking compilation. Use media_entity_desc.dev + * instead. */ struct { __u32 major; @@ -266,9 +205,9 @@ struct media_entity_desc { }; }; -#define MEDIA_PAD_FL_SINK (1 << 0) -#define MEDIA_PAD_FL_SOURCE (1 << 1) -#define MEDIA_PAD_FL_MUST_CONNECT (1 << 2) +#define MEDIA_PAD_FL_SINK (1 << 0) +#define MEDIA_PAD_FL_SOURCE (1 << 1) +#define MEDIA_PAD_FL_MUST_CONNECT (1 << 2) struct media_pad_desc { __u32 entity; /* entity ID */ @@ -277,13 +216,13 @@ struct media_pad_desc { __u32 reserved[2]; }; -#define MEDIA_LNK_FL_ENABLED (1 << 0) -#define MEDIA_LNK_FL_IMMUTABLE (1 << 1) -#define MEDIA_LNK_FL_DYNAMIC (1 << 2) +#define MEDIA_LNK_FL_ENABLED (1 << 0) +#define MEDIA_LNK_FL_IMMUTABLE (1 << 1) +#define MEDIA_LNK_FL_DYNAMIC (1 << 2) -#define MEDIA_LNK_FL_LINK_TYPE (0xf << 28) -# define MEDIA_LNK_FL_DATA_LINK (0 << 28) -# define MEDIA_LNK_FL_INTERFACE_LINK (1 << 28) +#define MEDIA_LNK_FL_LINK_TYPE (0xf << 28) +# define MEDIA_LNK_FL_DATA_LINK (0 << 28) +# define MEDIA_LNK_FL_INTERFACE_LINK (1 << 28) struct media_link_desc { struct media_pad_desc source; @@ -303,57 +242,47 @@ struct media_links_enum { /* Interface type ranges */ -#define MEDIA_INTF_T_DVB_BASE 0x00000100 -#define MEDIA_INTF_T_V4L_BASE 0x00000200 -#define MEDIA_INTF_T_ALSA_BASE 0x00000300 +#define MEDIA_INTF_T_DVB_BASE 0x00000100 +#define MEDIA_INTF_T_V4L_BASE 0x00000200 /* Interface types */ -#define MEDIA_INTF_T_DVB_FE (MEDIA_INTF_T_DVB_BASE) -#define MEDIA_INTF_T_DVB_DEMUX (MEDIA_INTF_T_DVB_BASE + 1) -#define MEDIA_INTF_T_DVB_DVR (MEDIA_INTF_T_DVB_BASE + 2) -#define MEDIA_INTF_T_DVB_CA (MEDIA_INTF_T_DVB_BASE + 3) -#define MEDIA_INTF_T_DVB_NET (MEDIA_INTF_T_DVB_BASE + 4) - -#define MEDIA_INTF_T_V4L_VIDEO (MEDIA_INTF_T_V4L_BASE) -#define MEDIA_INTF_T_V4L_VBI (MEDIA_INTF_T_V4L_BASE + 1) -#define MEDIA_INTF_T_V4L_RADIO (MEDIA_INTF_T_V4L_BASE + 2) -#define MEDIA_INTF_T_V4L_SUBDEV (MEDIA_INTF_T_V4L_BASE + 3) -#define MEDIA_INTF_T_V4L_SWRADIO (MEDIA_INTF_T_V4L_BASE + 4) -#define MEDIA_INTF_T_V4L_TOUCH (MEDIA_INTF_T_V4L_BASE + 5) - -#define MEDIA_INTF_T_ALSA_PCM_CAPTURE (MEDIA_INTF_T_ALSA_BASE) -#define MEDIA_INTF_T_ALSA_PCM_PLAYBACK (MEDIA_INTF_T_ALSA_BASE + 1) -#define MEDIA_INTF_T_ALSA_CONTROL (MEDIA_INTF_T_ALSA_BASE + 2) -#define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) -#define MEDIA_INTF_T_ALSA_RAWMIDI (MEDIA_INTF_T_ALSA_BASE + 4) -#define MEDIA_INTF_T_ALSA_HWDEP (MEDIA_INTF_T_ALSA_BASE + 5) -#define MEDIA_INTF_T_ALSA_SEQUENCER (MEDIA_INTF_T_ALSA_BASE + 6) -#define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) +#define MEDIA_INTF_T_DVB_FE (MEDIA_INTF_T_DVB_BASE) +#define MEDIA_INTF_T_DVB_DEMUX (MEDIA_INTF_T_DVB_BASE + 1) +#define MEDIA_INTF_T_DVB_DVR (MEDIA_INTF_T_DVB_BASE + 2) +#define MEDIA_INTF_T_DVB_CA (MEDIA_INTF_T_DVB_BASE + 3) +#define MEDIA_INTF_T_DVB_NET (MEDIA_INTF_T_DVB_BASE + 4) + +#define MEDIA_INTF_T_V4L_VIDEO (MEDIA_INTF_T_V4L_BASE) +#define MEDIA_INTF_T_V4L_VBI (MEDIA_INTF_T_V4L_BASE + 1) +#define MEDIA_INTF_T_V4L_RADIO (MEDIA_INTF_T_V4L_BASE + 2) +#define MEDIA_INTF_T_V4L_SUBDEV (MEDIA_INTF_T_V4L_BASE + 3) +#define MEDIA_INTF_T_V4L_SWRADIO (MEDIA_INTF_T_V4L_BASE + 4) +#define MEDIA_INTF_T_V4L_TOUCH (MEDIA_INTF_T_V4L_BASE + 5) + +#if defined(__KERNEL__) /* - * MC next gen API definitions + * Connector functions * - * NOTE: The declarations below are close to the MC RFC for the Media - * Controller, the next generation. Yet, there are a few adjustments - * to do, as we want to be able to have a functional API before - * the MC properties change. Those will be properly marked below. - * Please also notice that I removed "num_pads", "num_links", - * from the proposal, as a proper userspace application will likely - * use lists for pads/links, just as we intend to do in Kernelspace. - * The API definition should be freed from fields that are bound to - * some specific data structure. + * For now these should not be used in userspace, as some definitions may + * change. * - * FIXME: Currently, I opted to name the new types as "media_v2", as this - * won't cause any conflict with the Kernelspace namespace, nor with - * the previous kAPI media_*_desc namespace. This can be changed - * later, before the adding this API upstream. + * It is the responsibility of the entity drivers to add connectors and links. */ +#define MEDIA_ENT_F_CONN_RF (MEDIA_ENT_F_BASE + 0x30001) +#define MEDIA_ENT_F_CONN_SVIDEO (MEDIA_ENT_F_BASE + 0x30002) +#define MEDIA_ENT_F_CONN_COMPOSITE (MEDIA_ENT_F_BASE + 0x30003) +#endif + +/* + * MC next gen API definitions + */ struct media_v2_entity { __u32 id; - char name[64]; /* FIXME: move to a property? (RFC says so) */ + char name[64]; __u32 function; /* Main function of the entity */ __u32 reserved[6]; } __attribute__ ((packed)); @@ -413,10 +342,62 @@ struct media_v2_topology { /* ioctls */ -#define MEDIA_IOC_DEVICE_INFO _IOWR('|', 0x00, struct media_device_info) -#define MEDIA_IOC_ENUM_ENTITIES _IOWR('|', 0x01, struct media_entity_desc) -#define MEDIA_IOC_ENUM_LINKS _IOWR('|', 0x02, struct media_links_enum) -#define MEDIA_IOC_SETUP_LINK _IOWR('|', 0x03, struct media_link_desc) -#define MEDIA_IOC_G_TOPOLOGY _IOWR('|', 0x04, struct media_v2_topology) +#define MEDIA_IOC_DEVICE_INFO _IOWR('|', 0x00, struct media_device_info) +#define MEDIA_IOC_ENUM_ENTITIES _IOWR('|', 0x01, struct media_entity_desc) +#define MEDIA_IOC_ENUM_LINKS _IOWR('|', 0x02, struct media_links_enum) +#define MEDIA_IOC_SETUP_LINK _IOWR('|', 0x03, struct media_link_desc) +#define MEDIA_IOC_G_TOPOLOGY _IOWR('|', 0x04, struct media_v2_topology) + +#if !defined(__KERNEL__) || defined(__NEED_MEDIA_LEGACY_API) + +/* + * Legacy symbols used to avoid userspace compilation breakages. + * Do not use any of this in new applications! + * + * Those symbols map the entity function into types and should be + * used only on legacy programs for legacy hardware. Don't rely + * on those for MEDIA_IOC_G_TOPOLOGY. + */ +#define MEDIA_ENT_TYPE_SHIFT 16 +#define MEDIA_ENT_TYPE_MASK 0x00ff0000 +#define MEDIA_ENT_SUBTYPE_MASK 0x0000ffff + +#define MEDIA_ENT_T_DEVNODE_UNKNOWN (MEDIA_ENT_F_OLD_BASE | \ + MEDIA_ENT_SUBTYPE_MASK) + +#define MEDIA_ENT_T_DEVNODE MEDIA_ENT_F_OLD_BASE +#define MEDIA_ENT_T_DEVNODE_V4L MEDIA_ENT_F_IO_V4L +#define MEDIA_ENT_T_DEVNODE_FB (MEDIA_ENT_F_OLD_BASE + 2) +#define MEDIA_ENT_T_DEVNODE_ALSA (MEDIA_ENT_F_OLD_BASE + 3) +#define MEDIA_ENT_T_DEVNODE_DVB (MEDIA_ENT_F_OLD_BASE + 4) + +#define MEDIA_ENT_T_UNKNOWN MEDIA_ENT_F_UNKNOWN +#define MEDIA_ENT_T_V4L2_VIDEO MEDIA_ENT_F_IO_V4L +#define MEDIA_ENT_T_V4L2_SUBDEV MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN +#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR MEDIA_ENT_F_CAM_SENSOR +#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH MEDIA_ENT_F_FLASH +#define MEDIA_ENT_T_V4L2_SUBDEV_LENS MEDIA_ENT_F_LENS +#define MEDIA_ENT_T_V4L2_SUBDEV_DECODER MEDIA_ENT_F_ATV_DECODER +#define MEDIA_ENT_T_V4L2_SUBDEV_TUNER MEDIA_ENT_F_TUNER + +/* + * There is still no ALSA support in the media controller. These + * defines should not have been added and we leave them here only + * in case some application tries to use these defines. + */ +#define MEDIA_INTF_T_ALSA_BASE 0x00000300 +#define MEDIA_INTF_T_ALSA_PCM_CAPTURE (MEDIA_INTF_T_ALSA_BASE) +#define MEDIA_INTF_T_ALSA_PCM_PLAYBACK (MEDIA_INTF_T_ALSA_BASE + 1) +#define MEDIA_INTF_T_ALSA_CONTROL (MEDIA_INTF_T_ALSA_BASE + 2) +#define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) +#define MEDIA_INTF_T_ALSA_RAWMIDI (MEDIA_INTF_T_ALSA_BASE + 4) +#define MEDIA_INTF_T_ALSA_HWDEP (MEDIA_INTF_T_ALSA_BASE + 5) +#define MEDIA_INTF_T_ALSA_SEQUENCER (MEDIA_INTF_T_ALSA_BASE + 6) +#define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) + +/* Obsolete symbol for media_version, no longer used in the kernel */ +#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0) + +#endif #endif /* __LINUX_MEDIA_H */ -- cgit v1.2.3 From 20d60f61c58e8c937f3653819816dd203e6e3cb4 Mon Sep 17 00:00:00 2001 From: Haiyue Wang Date: Fri, 2 Feb 2018 10:16:10 +0800 Subject: ipmi: add a KCS IPMI BMC driver Provides a device driver for the KCS (Keyboard Controller Style) IPMI interface which meets the requirement of the BMC (Baseboard Management Controllers) side for handling the IPMI request from host system software. Signed-off-by: Haiyue Wang [Removed the selectability of IPMI_KCS_BMC, as it doesn't do much good to have it by itself.] Signed-off-by: Corey Minyard --- include/uapi/linux/ipmi_bmc.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 include/uapi/linux/ipmi_bmc.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipmi_bmc.h b/include/uapi/linux/ipmi_bmc.h new file mode 100644 index 000000000000..2f9f97e6123a --- /dev/null +++ b/include/uapi/linux/ipmi_bmc.h @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2015-2018, Intel Corporation. + +#ifndef _UAPI_LINUX_IPMI_BMC_H +#define _UAPI_LINUX_IPMI_BMC_H + +#include + +#define __IPMI_BMC_IOCTL_MAGIC 0xB1 +#define IPMI_BMC_IOCTL_SET_SMS_ATN _IO(__IPMI_BMC_IOCTL_MAGIC, 0x00) +#define IPMI_BMC_IOCTL_CLEAR_SMS_ATN _IO(__IPMI_BMC_IOCTL_MAGIC, 0x01) +#define IPMI_BMC_IOCTL_FORCE_ABORT _IO(__IPMI_BMC_IOCTL_MAGIC, 0x02) + +#endif /* _UAPI_LINUX_KCS_BMC_H */ -- cgit v1.2.3 From 3b6d082f0dfc2b7b9def494d2ab67fd4d3862ea1 Mon Sep 17 00:00:00 2001 From: Haiyue Wang Date: Mon, 26 Feb 2018 23:48:14 +0800 Subject: ipmi: kcs_bmc: coding-style fixes and use new poll type Many for coding-style fixes, and update the poll API with the new type '__poll_t', this is new commit from linux-4.16-rc1. Signed-off-by: Haiyue Wang Signed-off-by: Corey Minyard --- include/uapi/linux/ipmi_bmc.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipmi_bmc.h b/include/uapi/linux/ipmi_bmc.h index 2f9f97e6123a..1670f0944227 100644 --- a/include/uapi/linux/ipmi_bmc.h +++ b/include/uapi/linux/ipmi_bmc.h @@ -1,5 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2015-2018, Intel Corporation. +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2015-2018, Intel Corporation. + */ #ifndef _UAPI_LINUX_IPMI_BMC_H #define _UAPI_LINUX_IPMI_BMC_H @@ -11,4 +13,4 @@ #define IPMI_BMC_IOCTL_CLEAR_SMS_ATN _IO(__IPMI_BMC_IOCTL_MAGIC, 0x01) #define IPMI_BMC_IOCTL_FORCE_ABORT _IO(__IPMI_BMC_IOCTL_MAGIC, 0x02) -#endif /* _UAPI_LINUX_KCS_BMC_H */ +#endif /* _UAPI_LINUX_IPMI_BMC_H */ -- cgit v1.2.3 From 6b1aea8cf2c8618146edaf6b35775ab55f7cafe5 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 1 Jan 2018 00:00:00 +0100 Subject: batman-adv: Update copyright years for 2018 Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- include/uapi/linux/batadv_packet.h | 2 +- include/uapi/linux/batman_adv.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index 5cb360be2a11..daefd7283896 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) */ -/* Copyright (C) 2007-2017 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2018 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index ae00c99cbed0..56ae28934070 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: MIT */ -/* Copyright (C) 2016-2017 B.A.T.M.A.N. contributors: +/* Copyright (C) 2016-2018 B.A.T.M.A.N. contributors: * * Matthias Schiffer * -- cgit v1.2.3 From 2277c7cd75e39783eeb7512a6c35f8b4abbe1039 Mon Sep 17 00:00:00 2001 From: Richard Haines Date: Tue, 13 Feb 2018 20:56:24 +0000 Subject: sctp: Add LSM hooks Add security hooks allowing security modules to exercise access control over SCTP. Signed-off-by: Richard Haines Signed-off-by: Paul Moore --- include/uapi/linux/sctp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 4c4db14786bd..64736edd6726 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -126,6 +126,7 @@ typedef __s32 sctp_assoc_t; #define SCTP_STREAM_SCHEDULER 123 #define SCTP_STREAM_SCHEDULER_VALUE 124 #define SCTP_INTERLEAVING_SUPPORTED 125 +#define SCTP_SENDMSG_CONNECT 126 /* PR-SCTP policies */ #define SCTP_PR_SCTP_NONE 0x0000 -- cgit v1.2.3 From a163dc22d515d17844435c8217ff66193d35b3fa Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Wed, 24 Jan 2018 12:21:37 +0100 Subject: batman-adv: always assume 2-byte packet alignment NIC drivers generally try to ensure that the "network header" is aligned to a 4-byte boundary. This is not always possible: When Ethernet frames are encapsulated in other packets with 4-byte aligned headers, the inner Ethernet header will have 4-byte alignment, and in consequence, the inner network header is aligned to 2, but not to 4 bytes. Most parts of batman-adv only care about 2-byte alignment; in particular, no unaligned accesses occur in performance-critical paths that handle actual payload data. This is not true for OGM handling: the seqno and crc fields are accessed as 32-bit values. To avoid these unaligned accesses, this patch reduces the expected packet alignment to 2 bytes for all of batadv's packet types. As no unaligned accesses existed on the performance-critical paths anyways, this chance does have any (positive or negative) effect on performance, but it still makes sense to avoid these accesses to prevent log noise when examining other unaligned accesses in the kernel while batman-adv is active. Signed-off-by: Matthias Schiffer Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- include/uapi/linux/batadv_packet.h | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index daefd7283896..894d8d2f713d 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -196,8 +196,6 @@ struct batadv_bla_claim_dst { __be16 group; /* group id */ }; -#pragma pack() - /** * struct batadv_ogm_packet - ogm (routing protocol) packet * @packet_type: batman-adv packet type, part of the general header @@ -222,9 +220,6 @@ struct batadv_ogm_packet { __u8 reserved; __u8 tq; __be16 tvlv_len; - /* __packed is not needed as the struct size is divisible by 4, - * and the largest data type in this struct has a size of 4. - */ }; #define BATADV_OGM_HLEN sizeof(struct batadv_ogm_packet) @@ -249,9 +244,6 @@ struct batadv_ogm2_packet { __u8 orig[ETH_ALEN]; __be16 tvlv_len; __be32 throughput; - /* __packed is not needed as the struct size is divisible by 4, - * and the largest data type in this struct has a size of 4. - */ }; #define BATADV_OGM2_HLEN sizeof(struct batadv_ogm2_packet) @@ -405,7 +397,6 @@ struct batadv_icmp_packet_rr { * misalignment of the payload after the ethernet header. It may also lead to * leakage of information when the padding it not initialized before sending. */ -#pragma pack(2) /** * struct batadv_unicast_packet - unicast packet for network payload @@ -533,8 +524,6 @@ struct batadv_coded_packet { __be16 coded_len; }; -#pragma pack() - /** * struct batadv_unicast_tvlv_packet - generic unicast packet with tvlv payload * @packet_type: batman-adv packet type, part of the general header @@ -641,4 +630,6 @@ struct batadv_tvlv_mcast_data { __u8 reserved[3]; }; +#pragma pack() + #endif /* _UAPI_LINUX_BATADV_PACKET_H_ */ -- cgit v1.2.3 From 243ac21035176ac9692c1308a9f3b8f6a4e5d733 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 20 Feb 2018 07:30:22 -0600 Subject: ipmi: Add or fix SPDX-License-Identifier in all files And get rid of the license text that is no longer necessary. Signed-off-by: Corey Minyard Cc: Kees Cook Cc: Alistair Popple Cc: Jeremy Kerr Cc: Joel Stanley Cc: Rocky Craig --- include/uapi/linux/ipmi.h | 20 -------------------- include/uapi/linux/ipmi_msgdefs.h | 20 -------------------- 2 files changed, 40 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h index b076f7a47407..32d148309b16 100644 --- a/include/uapi/linux/ipmi.h +++ b/include/uapi/linux/ipmi.h @@ -10,26 +10,6 @@ * * Copyright 2002 MontaVista Software Inc. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _UAPI__LINUX_IPMI_H diff --git a/include/uapi/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h index 17f349459587..c2b23a9fdf3d 100644 --- a/include/uapi/linux/ipmi_msgdefs.h +++ b/include/uapi/linux/ipmi_msgdefs.h @@ -10,26 +10,6 @@ * * Copyright 2002 MontaVista Software Inc. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __LINUX_IPMI_MSGDEFS_H -- cgit v1.2.3 From 401910db4cd425899832a093539222b6174f92a2 Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Tue, 27 Feb 2018 09:52:43 -0800 Subject: rds: deliver zerocopy completion notification with data This commit is an optimization over commit 01883eda72bd ("rds: support for zcopy completion notification") for PF_RDS sockets. RDS applications are predominantly request-response transactions, so it is more efficient to reduce the number of system calls and have zerocopy completion notification delivered as ancillary data on the POLLIN channel. Cookies are passed up as ancillary data (at level SOL_RDS) in a struct rds_zcopy_cookies when the returned value of recvmsg() is greater than, or equal to, 0. A max of RDS_MAX_ZCOOKIES may be passed with each message. This commit removes support for zerocopy completion notification on MSG_ERRQUEUE for PF_RDS sockets. Signed-off-by: Sowmini Varadhan Acked-by: Willem de Bruijn Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller --- include/uapi/linux/errqueue.h | 2 -- include/uapi/linux/rds.h | 7 +++++++ 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h index 28812eda4209..dc64cfaf13da 100644 --- a/include/uapi/linux/errqueue.h +++ b/include/uapi/linux/errqueue.h @@ -20,13 +20,11 @@ struct sock_extended_err { #define SO_EE_ORIGIN_ICMP6 3 #define SO_EE_ORIGIN_TXSTATUS 4 #define SO_EE_ORIGIN_ZEROCOPY 5 -#define SO_EE_ORIGIN_ZCOOKIE 6 #define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS #define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) #define SO_EE_CODE_ZEROCOPY_COPIED 1 -#define SO_EE_ORIGIN_MAX_ZCOOKIES 8 /** * struct scm_timestamping - timestamps exposed through cmsg diff --git a/include/uapi/linux/rds.h b/include/uapi/linux/rds.h index 12e3bca32cad..a66b213de3d7 100644 --- a/include/uapi/linux/rds.h +++ b/include/uapi/linux/rds.h @@ -104,6 +104,7 @@ #define RDS_CMSG_MASKED_ATOMIC_CSWP 9 #define RDS_CMSG_RXPATH_LATENCY 11 #define RDS_CMSG_ZCOPY_COOKIE 12 +#define RDS_CMSG_ZCOPY_COMPLETION 13 #define RDS_INFO_FIRST 10000 #define RDS_INFO_COUNTERS 10000 @@ -317,6 +318,12 @@ struct rds_rdma_notify { #define RDS_RDMA_DROPPED 3 #define RDS_RDMA_OTHER_ERROR 4 +#define RDS_MAX_ZCOOKIES 8 +struct rds_zcopy_cookies { + __u32 num; + __u32 cookies[RDS_MAX_ZCOOKIES]; +}; + /* * Common set of flags for all RDMA related structs */ -- cgit v1.2.3 From bfff4862653bb96001ab57c1edd6d03f48e5f035 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Wed, 28 Feb 2018 22:40:16 -0500 Subject: net: fib_rules: support for match on ip_proto, sport and dport uapi for ip_proto, sport and dport range match in fib rules. Signed-off-by: Roopa Prabhu Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/uapi/linux/fib_rules.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 77d90ae38114..232df14e1287 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -35,6 +35,11 @@ struct fib_rule_uid_range { __u32 end; }; +struct fib_rule_port_range { + __u16 start; + __u16 end; +}; + enum { FRA_UNSPEC, FRA_DST, /* destination address */ @@ -59,6 +64,9 @@ enum { FRA_L3MDEV, /* iif or oif is l3mdev goto its table */ FRA_UID_RANGE, /* UID range */ FRA_PROTOCOL, /* Originator of the rule */ + FRA_IP_PROTO, /* ip proto */ + FRA_SPORT_RANGE, /* sport */ + FRA_DPORT_RANGE, /* dport */ __FRA_MAX }; -- cgit v1.2.3 From 77a5196a804e34ce5e215ef84d5e1de332e9c529 Mon Sep 17 00:00:00 2001 From: William Tu Date: Thu, 1 Mar 2018 13:49:57 -0800 Subject: gre: add sequence number for collect md mode. Currently GRE sequence number can only be used in native tunnel mode. This patch adds sequence number support for gre collect metadata mode. RFC2890 defines GRE sequence number to be specific to the traffic flow identified by the key. However, this patch does not implement per-key seqno. The sequence number is shared in the same tunnel device. That is, different tunnel keys using the same collect_md tunnel share single sequence number. Signed-off-by: William Tu Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index db6bdc375126..2a66769e5875 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -800,6 +800,7 @@ enum bpf_func_id { /* BPF_FUNC_skb_set_tunnel_key flags. */ #define BPF_F_ZERO_CSUM_TX (1ULL << 1) #define BPF_F_DONT_FRAGMENT (1ULL << 2) +#define BPF_F_SEQ_NUMBER (1ULL << 3) /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and * BPF_FUNC_perf_event_read_value flags. -- cgit v1.2.3 From 87ecc95d81d951b0984f2eb9c5c118cb68d0dce8 Mon Sep 17 00:00:00 2001 From: Priyaranjan Jha Date: Sun, 4 Mar 2018 10:38:35 -0800 Subject: tcp: add send queue size stat in SCM_TIMESTAMPING_OPT_STATS This patch adds TCP_NLA_SENDQ_SIZE stat into SCM_TIMESTAMPING_OPT_STATS. It reports no. of bytes present in send queue, when timestamp is generated. Signed-off-by: Priyaranjan Jha Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index b4a4f64635fa..93bad2128ef6 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -241,6 +241,7 @@ enum { TCP_NLA_MIN_RTT, /* minimum RTT */ TCP_NLA_RECUR_RETRANS, /* Recurring retransmits for the current pkt */ TCP_NLA_DELIVERY_RATE_APP_LMT, /* delivery rate application limited ? */ + TCP_NLA_SNDQ_SIZE, /* Data (bytes) pending in send queue */ }; -- cgit v1.2.3 From be631892948060f44b1ceee3132be1266932071e Mon Sep 17 00:00:00 2001 From: Priyaranjan Jha Date: Sun, 4 Mar 2018 10:38:36 -0800 Subject: tcp: add ca_state stat in SCM_TIMESTAMPING_OPT_STATS This patch adds TCP_NLA_CA_STATE stat into SCM_TIMESTAMPING_OPT_STATS. It reports ca_state of socket, when timestamp is generated. Signed-off-by: Priyaranjan Jha Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 93bad2128ef6..4c0ae0faf7ca 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -242,6 +242,7 @@ enum { TCP_NLA_RECUR_RETRANS, /* Recurring retransmits for the current pkt */ TCP_NLA_DELIVERY_RATE_APP_LMT, /* delivery rate application limited ? */ TCP_NLA_SNDQ_SIZE, /* Data (bytes) pending in send queue */ + TCP_NLA_CA_STATE, /* ca_state of socket */ }; -- cgit v1.2.3 From 955dc68cb9b23b42999cafe6df3684309bc686c6 Mon Sep 17 00:00:00 2001 From: Samuel Mendoza-Jonas Date: Mon, 5 Mar 2018 11:39:05 +1100 Subject: net/ncsi: Add generic netlink family Add a generic netlink family for NCSI. This supports three commands; NCSI_CMD_PKG_INFO which returns information on packages and their associated channels, NCSI_CMD_SET_INTERFACE which allows a specific package or package/channel combination to be set as the preferred choice, and NCSI_CMD_CLEAR_INTERFACE which clears any preferred setting. Signed-off-by: Samuel Mendoza-Jonas Signed-off-by: David S. Miller --- include/uapi/linux/ncsi.h | 115 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 include/uapi/linux/ncsi.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ncsi.h b/include/uapi/linux/ncsi.h new file mode 100644 index 000000000000..4c292ecbb748 --- /dev/null +++ b/include/uapi/linux/ncsi.h @@ -0,0 +1,115 @@ +/* + * Copyright Samuel Mendoza-Jonas, IBM Corporation 2018. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __UAPI_NCSI_NETLINK_H__ +#define __UAPI_NCSI_NETLINK_H__ + +/** + * enum ncsi_nl_commands - supported NCSI commands + * + * @NCSI_CMD_UNSPEC: unspecified command to catch errors + * @NCSI_CMD_PKG_INFO: list package and channel attributes. Requires + * NCSI_ATTR_IFINDEX. If NCSI_ATTR_PACKAGE_ID is specified returns the + * specific package and its channels - otherwise a dump request returns + * all packages and their associated channels. + * @NCSI_CMD_SET_INTERFACE: set preferred package and channel combination. + * Requires NCSI_ATTR_IFINDEX and the preferred NCSI_ATTR_PACKAGE_ID and + * optionally the preferred NCSI_ATTR_CHANNEL_ID. + * @NCSI_CMD_CLEAR_INTERFACE: clear any preferred package/channel combination. + * Requires NCSI_ATTR_IFINDEX. + * @NCSI_CMD_MAX: highest command number + */ +enum ncsi_nl_commands { + NCSI_CMD_UNSPEC, + NCSI_CMD_PKG_INFO, + NCSI_CMD_SET_INTERFACE, + NCSI_CMD_CLEAR_INTERFACE, + + __NCSI_CMD_AFTER_LAST, + NCSI_CMD_MAX = __NCSI_CMD_AFTER_LAST - 1 +}; + +/** + * enum ncsi_nl_attrs - General NCSI netlink attributes + * + * @NCSI_ATTR_UNSPEC: unspecified attributes to catch errors + * @NCSI_ATTR_IFINDEX: ifindex of network device using NCSI + * @NCSI_ATTR_PACKAGE_LIST: nested array of NCSI_PKG_ATTR attributes + * @NCSI_ATTR_PACKAGE_ID: package ID + * @NCSI_ATTR_CHANNEL_ID: channel ID + * @NCSI_ATTR_MAX: highest attribute number + */ +enum ncsi_nl_attrs { + NCSI_ATTR_UNSPEC, + NCSI_ATTR_IFINDEX, + NCSI_ATTR_PACKAGE_LIST, + NCSI_ATTR_PACKAGE_ID, + NCSI_ATTR_CHANNEL_ID, + + __NCSI_ATTR_AFTER_LAST, + NCSI_ATTR_MAX = __NCSI_ATTR_AFTER_LAST - 1 +}; + +/** + * enum ncsi_nl_pkg_attrs - NCSI netlink package-specific attributes + * + * @NCSI_PKG_ATTR_UNSPEC: unspecified attributes to catch errors + * @NCSI_PKG_ATTR: nested array of package attributes + * @NCSI_PKG_ATTR_ID: package ID + * @NCSI_PKG_ATTR_FORCED: flag signifying a package has been set as preferred + * @NCSI_PKG_ATTR_CHANNEL_LIST: nested array of NCSI_CHANNEL_ATTR attributes + * @NCSI_PKG_ATTR_MAX: highest attribute number + */ +enum ncsi_nl_pkg_attrs { + NCSI_PKG_ATTR_UNSPEC, + NCSI_PKG_ATTR, + NCSI_PKG_ATTR_ID, + NCSI_PKG_ATTR_FORCED, + NCSI_PKG_ATTR_CHANNEL_LIST, + + __NCSI_PKG_ATTR_AFTER_LAST, + NCSI_PKG_ATTR_MAX = __NCSI_PKG_ATTR_AFTER_LAST - 1 +}; + +/** + * enum ncsi_nl_channel_attrs - NCSI netlink channel-specific attributes + * + * @NCSI_CHANNEL_ATTR_UNSPEC: unspecified attributes to catch errors + * @NCSI_CHANNEL_ATTR: nested array of channel attributes + * @NCSI_CHANNEL_ATTR_ID: channel ID + * @NCSI_CHANNEL_ATTR_VERSION_MAJOR: channel major version number + * @NCSI_CHANNEL_ATTR_VERSION_MINOR: channel minor version number + * @NCSI_CHANNEL_ATTR_VERSION_STR: channel version string + * @NCSI_CHANNEL_ATTR_LINK_STATE: channel link state flags + * @NCSI_CHANNEL_ATTR_ACTIVE: channels with this flag are in + * NCSI_CHANNEL_ACTIVE state + * @NCSI_CHANNEL_ATTR_FORCED: flag signifying a channel has been set as + * preferred + * @NCSI_CHANNEL_ATTR_VLAN_LIST: nested array of NCSI_CHANNEL_ATTR_VLAN_IDs + * @NCSI_CHANNEL_ATTR_VLAN_ID: VLAN ID being filtered on this channel + * @NCSI_CHANNEL_ATTR_MAX: highest attribute number + */ +enum ncsi_nl_channel_attrs { + NCSI_CHANNEL_ATTR_UNSPEC, + NCSI_CHANNEL_ATTR, + NCSI_CHANNEL_ATTR_ID, + NCSI_CHANNEL_ATTR_VERSION_MAJOR, + NCSI_CHANNEL_ATTR_VERSION_MINOR, + NCSI_CHANNEL_ATTR_VERSION_STR, + NCSI_CHANNEL_ATTR_LINK_STATE, + NCSI_CHANNEL_ATTR_ACTIVE, + NCSI_CHANNEL_ATTR_FORCED, + NCSI_CHANNEL_ATTR_VLAN_LIST, + NCSI_CHANNEL_ATTR_VLAN_ID, + + __NCSI_CHANNEL_ATTR_AFTER_LAST, + NCSI_CHANNEL_ATTR_MAX = __NCSI_CHANNEL_ATTR_AFTER_LAST - 1 +}; + +#endif /* __UAPI_NCSI_NETLINK_H__ */ -- cgit v1.2.3 From faeb7833eee0d6afe0ecb6bdfa6042556c2c352e Mon Sep 17 00:00:00 2001 From: Roman Kagan Date: Thu, 1 Feb 2018 16:48:32 +0300 Subject: kvm: x86: hyperv: guest->host event signaling via eventfd MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In Hyper-V, the fast guest->host notification mechanism is the SIGNAL_EVENT hypercall, with a single parameter of the connection ID to signal. Currently this hypercall incurs a user exit and requires the userspace to decode the parameters and trigger the notification of the potentially different I/O context. To avoid the costly user exit, process this hypercall and signal the corresponding eventfd in KVM, similar to ioeventfd. The association between the connection id and the eventfd is established via the newly introduced KVM_HYPERV_EVENTFD ioctl, and maintained in an (srcu-protected) IDR. Signed-off-by: Roman Kagan Reviewed-by: David Hildenbrand [asm/hyperv.h changes approved by KY Srinivasan. - Radim] Signed-off-by: Radim Krčmář --- include/uapi/linux/kvm.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 7b26d4b0b052..2d2d926113ba 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -936,6 +936,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_PPC_GET_CPU_CHAR 151 #define KVM_CAP_S390_BPB 152 #define KVM_CAP_GET_MSR_FEATURES 153 +#define KVM_CAP_HYPERV_EVENTFD 154 #ifdef KVM_CAP_IRQ_ROUTING @@ -1375,6 +1376,10 @@ struct kvm_enc_region { #define KVM_MEMORY_ENCRYPT_REG_REGION _IOR(KVMIO, 0xbb, struct kvm_enc_region) #define KVM_MEMORY_ENCRYPT_UNREG_REGION _IOR(KVMIO, 0xbc, struct kvm_enc_region) +/* Available with KVM_CAP_HYPERV_EVENTFD */ +#define KVM_HYPERV_EVENTFD _IOW(KVMIO, 0xbd, struct kvm_hyperv_eventfd) + + /* Secure Encrypted Virtualization command */ enum sev_cmd_id { /* Guest initialization commands */ @@ -1515,4 +1520,14 @@ struct kvm_assigned_msix_entry { #define KVM_ARM_DEV_EL1_PTIMER (1 << 1) #define KVM_ARM_DEV_PMU (1 << 2) +struct kvm_hyperv_eventfd { + __u32 conn_id; + __s32 fd; + __u32 flags; + __u32 padding[3]; +}; + +#define KVM_HYPERV_CONN_ID_MASK 0x00ffffff +#define KVM_HYPERV_EVENTFD_DEASSIGN (1 << 0) + #endif /* __LINUX_KVM_H */ -- cgit v1.2.3 From 7b7e39522a61f402d41dd9a67f3fa2133ef9d4e8 Mon Sep 17 00:00:00 2001 From: Ken Hofsass Date: Wed, 31 Jan 2018 16:03:35 -0800 Subject: KVM: x86: add SYNC_REGS_SIZE_BYTES #define. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace hardcoded padding size value for struct kvm_sync_regs with #define SYNC_REGS_SIZE_BYTES. Also update the value specified in api.txt from outdated hardcoded value to SYNC_REGS_SIZE_BYTES. Signed-off-by: Ken Hofsass Reviewed-by: David Hildenbrand Acked-by: Christian Borntraeger Signed-off-by: Radim Krčmář --- include/uapi/linux/kvm.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 2d2d926113ba..088c2c92db55 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -396,6 +396,10 @@ struct kvm_run { char padding[256]; }; + /* 2048 is the size of the char array used to bound/pad the size + * of the union that holds sync regs. + */ + #define SYNC_REGS_SIZE_BYTES 2048 /* * shared registers between kvm and userspace. * kvm_valid_regs specifies the register classes set by the host @@ -407,7 +411,7 @@ struct kvm_run { __u64 kvm_dirty_regs; union { struct kvm_sync_regs regs; - char padding[2048]; + char padding[SYNC_REGS_SIZE_BYTES]; } s; }; -- cgit v1.2.3 From ed63afb8a318f6b3558d76afba7809daee4f28e5 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 5 Mar 2018 20:44:18 +0800 Subject: sctp: add support for PR-SCTP Information for sendmsg This patch is to add support for PR-SCTP Information for sendmsg, as described in section 5.3.7 of RFC6458. With this option, you can specify pr_policy and pr_value for user data in sendmsg. It's also a necessary send info for sctp_sendv. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 4c4db14786bd..0dd1f82a4fa8 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -260,6 +260,19 @@ struct sctp_nxtinfo { sctp_assoc_t nxt_assoc_id; }; +/* 5.3.7 SCTP PR-SCTP Information Structure (SCTP_PRINFO) + * + * This cmsghdr structure specifies SCTP options for sendmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ------------------- + * IPPROTO_SCTP SCTP_PRINFO struct sctp_prinfo + */ +struct sctp_prinfo { + __u16 pr_policy; + __u32 pr_value; +}; + /* * sinfo_flags: 16 bits (unsigned integer) * @@ -293,6 +306,8 @@ typedef enum sctp_cmsg_type { #define SCTP_RCVINFO SCTP_RCVINFO SCTP_NXTINFO, /* 5.3.6 SCTP Next Receive Information Structure */ #define SCTP_NXTINFO SCTP_NXTINFO + SCTP_PRINFO, /* 5.3.7 SCTP PR-SCTP Information Structure */ +#define SCTP_PRINFO SCTP_PRINFO } sctp_cmsg_t; /* -- cgit v1.2.3 From 2c0dbaa0c43d04d8d6daf52adb724c5789676b15 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 5 Mar 2018 20:44:19 +0800 Subject: sctp: add support for SCTP_DSTADDRV4/6 Information for sendmsg This patch is to add support for Destination IPv4/6 Address options for sendmsg, as described in section 5.3.9/10 of RFC6458. With this option, you can provide more than one destination addrs to sendmsg when creating asoc, like sctp_connectx. It's also a necessary send info for sctp_sendv. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 0dd1f82a4fa8..a1bc35098033 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -308,6 +308,12 @@ typedef enum sctp_cmsg_type { #define SCTP_NXTINFO SCTP_NXTINFO SCTP_PRINFO, /* 5.3.7 SCTP PR-SCTP Information Structure */ #define SCTP_PRINFO SCTP_PRINFO + SCTP_AUTHINFO, /* 5.3.8 SCTP AUTH Information Structure (RESERVED) */ +#define SCTP_AUTHINFO SCTP_AUTHINFO + SCTP_DSTADDRV4, /* 5.3.9 SCTP Destination IPv4 Address Structure */ +#define SCTP_DSTADDRV4 SCTP_DSTADDRV4 + SCTP_DSTADDRV6, /* 5.3.10 SCTP Destination IPv6 Address Structure */ +#define SCTP_DSTADDRV6 SCTP_DSTADDRV6 } sctp_cmsg_t; /* -- cgit v1.2.3 From 4910280503f3af2857d5aa77e35b22d93a8960a8 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 5 Mar 2018 20:44:20 +0800 Subject: sctp: add support for snd flag SCTP_SENDALL process in sendmsg This patch is to add support for snd flag SCTP_SENDALL process in sendmsg, as described in section 5.3.4 of RFC6458. With this flag, you can send the same data to all the asocs of this sk once. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index a1bc35098033..e94b6d297ad9 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -284,6 +284,8 @@ enum sctp_sinfo_flags { SCTP_ADDR_OVER = (1 << 1), /* Override the primary destination. */ SCTP_ABORT = (1 << 2), /* Send an ABORT message to the peer. */ SCTP_SACK_IMMEDIATELY = (1 << 3), /* SACK should be sent without delay. */ + /* 2 bits here have been used by SCTP_PR_SCTP_MASK */ + SCTP_SENDALL = (1 << 6), SCTP_NOTIFICATION = MSG_NOTIFICATION, /* Next message is not user msg but notification. */ SCTP_EOF = MSG_FIN, /* Initiate graceful shutdown process. */ }; -- cgit v1.2.3 From 95da0cdb723260362fc126a563285ac66a193da7 Mon Sep 17 00:00:00 2001 From: Teng Qin Date: Tue, 6 Mar 2018 10:55:01 -0800 Subject: bpf: add support to read sample address in bpf program This commit adds new field "addr" to bpf_perf_event_data which could be read and used by bpf programs attached to perf events. The value of the field is copied from bpf_perf_event_data_kern.addr and contains the address value recorded by specifying sample_type with PERF_SAMPLE_ADDR when calling perf_event_open. Signed-off-by: Teng Qin Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf_perf_event.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf_perf_event.h b/include/uapi/linux/bpf_perf_event.h index 8f95303f9d80..eb1b9d21250c 100644 --- a/include/uapi/linux/bpf_perf_event.h +++ b/include/uapi/linux/bpf_perf_event.h @@ -13,6 +13,7 @@ struct bpf_perf_event_data { bpf_user_pt_regs_t regs; __u64 sample_period; + __u64 addr; }; #endif /* _UAPI__LINUX_BPF_PERF_EVENT_H__ */ -- cgit v1.2.3 From 459d153d9916ea48b1550bbb6f2959dc03bff011 Mon Sep 17 00:00:00 2001 From: Pieter Jansen van Vuuren Date: Tue, 6 Mar 2018 18:11:14 +0100 Subject: net/sched: cls_flower: Add support to handle first frag as match field Allow setting firstfrag as matching option in tc flower classifier. # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 \ ip_flags firstfrag action mirred egress redirect dev eth1 Signed-off-by: Pieter Jansen van Vuuren Signed-off-by: Simon Horman Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- include/uapi/linux/pkt_cls.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 7cafb26df555..be05e66c167b 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -475,6 +475,7 @@ enum { enum { TCA_FLOWER_KEY_FLAGS_IS_FRAGMENT = (1 << 0), + TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), }; /* Match-all classifier */ -- cgit v1.2.3 From 84a1d9c4820080bebcbd413a845076dcb62f45fa Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Thu, 8 Mar 2018 15:45:03 +0000 Subject: net: ethtool: extend RXNFC API to support RSS spreading of filter matches We use a two-step process to configure a filter with RSS spreading. First, the RSS context is allocated and configured using ETHTOOL_SRSSH; this returns an identifier (rss_context) which can then be passed to subsequent invocations of ETHTOOL_SRXCLSRLINS to specify that the offset from the RSS indirection table lookup should be added to the queue number (ring_cookie) when delivering the packet. Drivers for devices which can only use the indirection table entry directly (not add it to a base queue number) should reject rule insertions combining RSS with a nonzero ring_cookie. Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 44a0b675a6bc..20da156aaf64 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -914,12 +914,15 @@ static inline __u64 ethtool_get_flow_spec_ring_vf(__u64 ring_cookie) * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW * @data: Command-dependent value * @fs: Flow classification rule + * @rss_context: RSS context to be affected * @rule_cnt: Number of rules to be affected * @rule_locs: Array of used rule locations * * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following - * structure fields must not be used. + * structure fields must not be used, except that if @flow_type includes + * the %FLOW_RSS flag, then @rss_context determines which RSS context to + * act on. * * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues * on return. @@ -931,7 +934,9 @@ static inline __u64 ethtool_get_flow_spec_ring_vf(__u64 ring_cookie) * set in @data then special location values should not be used. * * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an - * existing rule on entry and @fs contains the rule on return. + * existing rule on entry and @fs contains the rule on return; if + * @fs.@flow_type includes the %FLOW_RSS flag, then @rss_context is + * filled with the RSS context ID associated with the rule. * * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the * user buffer for @rule_locs on entry. On return, @data is the size @@ -942,7 +947,11 @@ static inline __u64 ethtool_get_flow_spec_ring_vf(__u64 ring_cookie) * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. * @fs.@location either specifies the location to use or is a special * location value with %RX_CLS_LOC_SPECIAL flag set. On return, - * @fs.@location is the actual rule location. + * @fs.@location is the actual rule location. If @fs.@flow_type + * includes the %FLOW_RSS flag, @rss_context is the RSS context ID to + * use for flow spreading traffic which matches this rule. The value + * from the rxfh indirection table will be added to @fs.@ring_cookie + * to choose which ring to deliver to. * * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an * existing rule on entry. @@ -963,7 +972,10 @@ struct ethtool_rxnfc { __u32 flow_type; __u64 data; struct ethtool_rx_flow_spec fs; - __u32 rule_cnt; + union { + __u32 rule_cnt; + __u32 rss_context; + }; __u32 rule_locs[0]; }; @@ -990,7 +1002,11 @@ struct ethtool_rxfh_indir { /** * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key. * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH - * @rss_context: RSS context identifier. + * @rss_context: RSS context identifier. Context 0 is the default for normal + * traffic; other contexts can be referenced as the destination for RX flow + * classification rules. %ETH_RXFH_CONTEXT_ALLOC is used with command + * %ETHTOOL_SRSSH to allocate a new RSS context; on return this field will + * contain the ID of the newly allocated context. * @indir_size: On entry, the array size of the user buffer for the * indirection table, which may be zero, or (for %ETHTOOL_SRSSH), * %ETH_RXFH_INDIR_NO_CHANGE. On return from %ETHTOOL_GRSSH, @@ -1009,7 +1025,8 @@ struct ethtool_rxfh_indir { * size should be returned. For %ETHTOOL_SRSSH, an @indir_size of * %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested * and a @indir_size of zero means the indir table should be reset to default - * values. An hfunc of zero means that hash function setting is not requested. + * values (if @rss_context == 0) or that the RSS context should be deleted. + * An hfunc of zero means that hash function setting is not requested. */ struct ethtool_rxfh { __u32 cmd; @@ -1021,6 +1038,7 @@ struct ethtool_rxfh { __u32 rsvd32; __u32 rss_config[0]; }; +#define ETH_RXFH_CONTEXT_ALLOC 0xffffffff #define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff /** @@ -1635,6 +1653,8 @@ static inline int ethtool_validate_duplex(__u8 duplex) /* Flag to enable additional fields in struct ethtool_rx_flow_spec */ #define FLOW_EXT 0x80000000 #define FLOW_MAC_EXT 0x40000000 +/* Flag to enable RSS spreading of traffic matching rule (nfc only) */ +#define FLOW_RSS 0x20000000 /* L3-L4 network traffic flow hash options */ #define RXH_L2DA (1 << 1) -- cgit v1.2.3 From f597fbce38d230af95384f4a04e0a13a1d0ad45d Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Mon, 5 Mar 2018 22:17:38 +1030 Subject: serial: 8250: Add Nuvoton NPCM UART The Nuvoton UART is almost compatible with the 8250 driver when probed via the 8250_of driver, however it requires some extra configuration at startup. Reviewed-by: Rob Herring Signed-off-by: Joel Stanley Cc: stable Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/serial_core.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 1c8413f93e3d..dce5f9dae121 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -76,6 +76,9 @@ #define PORT_SUNZILOG 38 #define PORT_SUNSAB 39 +/* Nuvoton UART */ +#define PORT_NPCM 40 + /* Intel EG20 */ #define PORT_PCH_8LINE 44 #define PORT_PCH_2LINE 45 -- cgit v1.2.3 From 72199320d49dbafa1a99f94f1cd60dc90035c154 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 1 Mar 2018 17:33:32 +0100 Subject: timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock The planned change to unify the behaviour of the MONOTONIC and BOOTTIME clocks vs. suspend removes the ability to retrieve the active non-suspended time of a system. Provide a new CLOCK_MONOTONIC_ACTIVE clock which returns the active non-suspended time of the system via clock_gettime(). This preserves the old behaviour of CLOCK_MONOTONIC before the BOOTTIME/MONOTONIC unification. This new clock also allows applications to detect programmatically that the MONOTONIC and BOOTTIME clocks are identical. Signed-off-by: Thomas Gleixner Cc: Dmitry Torokhov Cc: John Stultz Cc: Jonathan Corbet Cc: Kevin Easton Cc: Linus Torvalds Cc: Mark Salyzyn Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Petr Mladek Cc: Prarit Bhargava Cc: Sergey Senozhatsky Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20180301165149.965235774@linutronix.de Signed-off-by: Ingo Molnar --- include/uapi/linux/time.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h index 53f8dd84beb5..61a187df8da2 100644 --- a/include/uapi/linux/time.h +++ b/include/uapi/linux/time.h @@ -61,6 +61,7 @@ struct itimerval { */ #define CLOCK_SGI_CYCLE 10 #define CLOCK_TAI 11 +#define CLOCK_MONOTONIC_ACTIVE 12 #define MAX_CLOCKS 16 #define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC) -- cgit v1.2.3 From 32ff77e8cc9e66cc4fb38098f64fd54cc8f54573 Mon Sep 17 00:00:00 2001 From: Milind Chabbi Date: Mon, 12 Mar 2018 14:45:47 +0100 Subject: perf/core: Implement fast breakpoint modification via _IOC_MODIFY_ATTRIBUTES Problem and motivation: Once a breakpoint perf event (PERF_TYPE_BREAKPOINT) is created, there is no flexibility to change the breakpoint type (bp_type), breakpoint address (bp_addr), or breakpoint length (bp_len). The only option is to close the perf event and configure a new breakpoint event. This inflexibility has a significant performance overhead. For example, sampling-based, lightweight performance profilers (and also concurrency bug detection tools), monitor different addresses for a short duration using PERF_TYPE_BREAKPOINT and change the address (bp_addr) to another address or change the kind of breakpoint (bp_type) from "write" to a "read" or vice-versa or change the length (bp_len) of the address being monitored. The cost of these modifications is prohibitive since it involves unmapping the circular buffer associated with the perf event, closing the perf event, opening another perf event and mmaping another circular buffer. Solution: The new ioctl flag for perf events, PERF_EVENT_IOC_MODIFY_ATTRIBUTES, introduced in this patch takes a pointer to a struct perf_event_attr as an argument to update an old breakpoint event with new address, type, and size. This facility allows retaining a previous mmaped perf events ring buffer and avoids having to close and reopen another perf event. This patch supports only changing PERF_TYPE_BREAKPOINT event type; future implementations can extend this feature. The patch replicates some of its functionality of modify_user_hw_breakpoint() in kernel/events/hw_breakpoint.c. modify_user_hw_breakpoint cannot be called directly since perf_event_ctx_lock() is already held in _perf_ioctl(). Evidence: Experiments show that the baseline (not able to modify an already created breakpoint) costs an order of magnitude (~10x) more than the suggested optimization (having the ability to dynamically modifying a configured breakpoint via ioctl). When the breakpoints typically do not trap, the speedup due to the suggested optimization is ~10x; even when the breakpoints always trap, the speedup is ~4x due to the suggested optimization. Testing: tests posted at https://github.com/linux-contrib/perf_event_modify_bp demonstrate the performance significance of this patch. Tests also check the functional correctness of the patch. Signed-off-by: Milind Chabbi [ Using modify_user_hw_breakpoint_check function. ] [ Reformated PERF_EVENT_IOC_*, so the values are all in one column. ] Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Frederic Weisbecker Cc: Hari Bathini Cc: Jin Yao Cc: Jiri Olsa Cc: Kan Liang Cc: Linus Torvalds Cc: Michael Ellerman Cc: Namhyung Kim Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Sukadev Bhattiprolu Cc: Thomas Gleixner Cc: Will Deacon Link: http://lkml.kernel.org/r/20180312134548.31532-8-jolsa@kernel.org Signed-off-by: Ingo Molnar --- include/uapi/linux/perf_event.h | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 6f873503552d..912b85b52344 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -448,17 +448,18 @@ struct perf_event_query_bpf { /* * Ioctls that can be done on a perf event fd: */ -#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) -#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) -#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) -#define PERF_EVENT_IOC_RESET _IO ('$', 3) -#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) -#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) -#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) -#define PERF_EVENT_IOC_ID _IOR('$', 7, __u64 *) -#define PERF_EVENT_IOC_SET_BPF _IOW('$', 8, __u32) -#define PERF_EVENT_IOC_PAUSE_OUTPUT _IOW('$', 9, __u32) -#define PERF_EVENT_IOC_QUERY_BPF _IOWR('$', 10, struct perf_event_query_bpf *) +#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) +#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) +#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) +#define PERF_EVENT_IOC_RESET _IO ('$', 3) +#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) +#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) +#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) +#define PERF_EVENT_IOC_ID _IOR('$', 7, __u64 *) +#define PERF_EVENT_IOC_SET_BPF _IOW('$', 8, __u32) +#define PERF_EVENT_IOC_PAUSE_OUTPUT _IOW('$', 9, __u32) +#define PERF_EVENT_IOC_QUERY_BPF _IOWR('$', 10, struct perf_event_query_bpf *) +#define PERF_EVENT_IOC_MODIFY_ATTRIBUTES _IOW('$', 11, struct perf_event_attr *) enum perf_event_ioc_flags { PERF_IOC_FLAG_GROUP = 1U << 0, -- cgit v1.2.3 From 41aeefcc38a2643a62db46818a70a781efb40d99 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Tue, 13 Mar 2018 11:41:12 +0100 Subject: batman-adv: add DAT cache netlink support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dump the list of DAT cache entries via the netlink socket. Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- include/uapi/linux/batman_adv.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 56ae28934070..95ab5dbd09fa 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -272,6 +272,21 @@ enum batadv_nl_attrs { */ BATADV_ATTR_BLA_CRC, + /** + * @BATADV_ATTR_DAT_CACHE_IP4ADDRESS: Client IPv4 address + */ + BATADV_ATTR_DAT_CACHE_IP4ADDRESS, + + /** + * @BATADV_ATTR_DAT_CACHE_HWADDRESS: Client MAC address + */ + BATADV_ATTR_DAT_CACHE_HWADDRESS, + + /** + * @BATADV_ATTR_DAT_CACHE_VID: VLAN ID + */ + BATADV_ATTR_DAT_CACHE_VID, + /* add attributes above here, update the policy in netlink.c */ /** @@ -361,6 +376,11 @@ enum batadv_nl_commands { */ BATADV_CMD_GET_BLA_BACKBONE, + /** + * @BATADV_CMD_GET_DAT_CACHE: Query list of DAT cache entries + */ + BATADV_CMD_GET_DAT_CACHE, + /* add new commands above here */ /** -- cgit v1.2.3 From 53dd9a68ba683986ec90497586f94b941bb748a0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Tue, 13 Mar 2018 11:41:13 +0100 Subject: batman-adv: add multicast flags netlink support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dump the list of multicast flags entries via the netlink socket. Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- include/uapi/linux/batman_adv.h | 62 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 95ab5dbd09fa..324a0e1143e7 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -91,6 +91,53 @@ enum batadv_tt_client_flags { BATADV_TT_CLIENT_TEMP = (1 << 11), }; +/** + * enum batadv_mcast_flags_priv - Private, own multicast flags + * + * These are internal, multicast related flags. Currently they describe certain + * multicast related attributes of the segment this originator bridges into the + * mesh. + * + * Those attributes are used to determine the public multicast flags this + * originator is going to announce via TT. + * + * For netlink, if BATADV_MCAST_FLAGS_BRIDGED is unset then all querier + * related flags are undefined. + */ +enum batadv_mcast_flags_priv { + /** + * @BATADV_MCAST_FLAGS_BRIDGED: There is a bridge on top of the mesh + * interface. + */ + BATADV_MCAST_FLAGS_BRIDGED = (1 << 0), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS: Whether an IGMP querier + * exists in the mesh + */ + BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS = (1 << 1), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS: Whether an MLD querier + * exists in the mesh + */ + BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS = (1 << 2), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING: If an IGMP querier + * exists, whether it is potentially shadowing multicast listeners + * (i.e. querier is behind our own bridge segment) + */ + BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING = (1 << 3), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING: If an MLD querier + * exists, whether it is potentially shadowing multicast listeners + * (i.e. querier is behind our own bridge segment) + */ + BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4), +}; + /** * enum batadv_nl_attrs - batman-adv netlink attributes */ @@ -287,6 +334,16 @@ enum batadv_nl_attrs { */ BATADV_ATTR_DAT_CACHE_VID, + /** + * @BATADV_ATTR_MCAST_FLAGS: Per originator multicast flags + */ + BATADV_ATTR_MCAST_FLAGS, + + /** + * @BATADV_ATTR_MCAST_FLAGS_PRIV: Private, own multicast flags + */ + BATADV_ATTR_MCAST_FLAGS_PRIV, + /* add attributes above here, update the policy in netlink.c */ /** @@ -381,6 +438,11 @@ enum batadv_nl_commands { */ BATADV_CMD_GET_DAT_CACHE, + /** + * @BATADV_CMD_GET_MCAST_FLAGS: Query list of multicast flags + */ + BATADV_CMD_GET_MCAST_FLAGS, + /* add new commands above here */ /** -- cgit v1.2.3 From d64c2a76123f0300b08d0557ad56e9d599872a36 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 14 Mar 2018 13:12:26 +0100 Subject: staging: irda: remove the irda network stack and drivers No one has publicly stepped up to maintain this broken codebase for devices that no one uses anymore, so let's just drop the whole thing. If someone really wants/needs it, we can revert this and they can fix the code up to work properly. Cc: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/irda.h | 252 ---------------------------------------------- 1 file changed, 252 deletions(-) delete mode 100644 include/uapi/linux/irda.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/irda.h b/include/uapi/linux/irda.h deleted file mode 100644 index 2105c266aa6e..000000000000 --- a/include/uapi/linux/irda.h +++ /dev/null @@ -1,252 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/********************************************************************* - * - * Filename: irda.h - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli - * Created at: Mon Mar 8 14:06:12 1999 - * Modified at: Sat Dec 25 16:06:42 1999 - * Modified by: Dag Brattli - * - * Copyright (c) 1999 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#ifndef KERNEL_IRDA_H -#define KERNEL_IRDA_H - -#include -#include - -/* Note that this file is shared with user space. */ - -/* Hint bit positions for first hint byte */ -#define HINT_PNP 0x01 -#define HINT_PDA 0x02 -#define HINT_COMPUTER 0x04 -#define HINT_PRINTER 0x08 -#define HINT_MODEM 0x10 -#define HINT_FAX 0x20 -#define HINT_LAN 0x40 -#define HINT_EXTENSION 0x80 - -/* Hint bit positions for second hint byte (first extension byte) */ -#define HINT_TELEPHONY 0x01 -#define HINT_FILE_SERVER 0x02 -#define HINT_COMM 0x04 -#define HINT_MESSAGE 0x08 -#define HINT_HTTP 0x10 -#define HINT_OBEX 0x20 - -/* IrLMP character code values */ -#define CS_ASCII 0x00 -#define CS_ISO_8859_1 0x01 -#define CS_ISO_8859_2 0x02 -#define CS_ISO_8859_3 0x03 -#define CS_ISO_8859_4 0x04 -#define CS_ISO_8859_5 0x05 -#define CS_ISO_8859_6 0x06 -#define CS_ISO_8859_7 0x07 -#define CS_ISO_8859_8 0x08 -#define CS_ISO_8859_9 0x09 -#define CS_UNICODE 0xff - -/* These are the currently known dongles */ -typedef enum { - IRDA_TEKRAM_DONGLE = 0, - IRDA_ESI_DONGLE = 1, - IRDA_ACTISYS_DONGLE = 2, - IRDA_ACTISYS_PLUS_DONGLE = 3, - IRDA_GIRBIL_DONGLE = 4, - IRDA_LITELINK_DONGLE = 5, - IRDA_AIRPORT_DONGLE = 6, - IRDA_OLD_BELKIN_DONGLE = 7, - IRDA_EP7211_IR = 8, - IRDA_MCP2120_DONGLE = 9, - IRDA_ACT200L_DONGLE = 10, - IRDA_MA600_DONGLE = 11, - IRDA_TOIM3232_DONGLE = 12, - IRDA_EP7211_DONGLE = 13, -} IRDA_DONGLE; - -/* Protocol types to be used for SOCK_DGRAM */ -enum { - IRDAPROTO_UNITDATA = 0, - IRDAPROTO_ULTRA = 1, - IRDAPROTO_MAX -}; - -#define SOL_IRLMP 266 /* Same as SOL_IRDA for now */ -#define SOL_IRTTP 266 /* Same as SOL_IRDA for now */ - -#define IRLMP_ENUMDEVICES 1 /* Return discovery log */ -#define IRLMP_IAS_SET 2 /* Set an attribute in local IAS */ -#define IRLMP_IAS_QUERY 3 /* Query remote IAS for attribute */ -#define IRLMP_HINTS_SET 4 /* Set hint bits advertised */ -#define IRLMP_QOS_SET 5 -#define IRLMP_QOS_GET 6 -#define IRLMP_MAX_SDU_SIZE 7 -#define IRLMP_IAS_GET 8 /* Get an attribute from local IAS */ -#define IRLMP_IAS_DEL 9 /* Remove attribute from local IAS */ -#define IRLMP_HINT_MASK_SET 10 /* Set discovery filter */ -#define IRLMP_WAITDEVICE 11 /* Wait for a new discovery */ - -#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */ - -#define IAS_MAX_STRING 256 /* See IrLMP 1.1, 4.3.3.2 */ -#define IAS_MAX_OCTET_STRING 1024 /* See IrLMP 1.1, 4.3.3.2 */ -#define IAS_MAX_CLASSNAME 60 /* See IrLMP 1.1, 4.3.1 */ -#define IAS_MAX_ATTRIBNAME 60 /* See IrLMP 1.1, 4.3.3.1 */ -#define IAS_MAX_ATTRIBNUMBER 256 /* See IrLMP 1.1, 4.3.3.1 */ -/* For user space backward compatibility - may be fixed in kernel 2.5.X - * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */ -#define IAS_EXPORT_CLASSNAME 64 -#define IAS_EXPORT_ATTRIBNAME 256 - -/* Attribute type needed for struct irda_ias_set */ -#define IAS_MISSING 0 -#define IAS_INTEGER 1 -#define IAS_OCT_SEQ 2 -#define IAS_STRING 3 - -#define LSAP_ANY 0xff - -struct sockaddr_irda { - __kernel_sa_family_t sir_family; /* AF_IRDA */ - __u8 sir_lsap_sel; /* LSAP selector */ - __u32 sir_addr; /* Device address */ - char sir_name[25]; /* Usually :IrDA:TinyTP */ -}; - -struct irda_device_info { - __u32 saddr; /* Address of local interface */ - __u32 daddr; /* Address of remote device */ - char info[22]; /* Description */ - __u8 charset; /* Charset used for description */ - __u8 hints[2]; /* Hint bits */ -}; - -struct irda_device_list { - __u32 len; - struct irda_device_info dev[1]; -}; - -struct irda_ias_set { - char irda_class_name[IAS_EXPORT_CLASSNAME]; - char irda_attrib_name[IAS_EXPORT_ATTRIBNAME]; - unsigned int irda_attrib_type; - union { - unsigned int irda_attrib_int; - struct { - unsigned short len; - __u8 octet_seq[IAS_MAX_OCTET_STRING]; - } irda_attrib_octet_seq; - struct { - __u8 len; - __u8 charset; - __u8 string[IAS_MAX_STRING]; - } irda_attrib_string; - } attribute; - __u32 daddr; /* Address of device (for some queries only) */ -}; - -/* Some private IOCTL's (max 16) */ -#define SIOCSDONGLE (SIOCDEVPRIVATE + 0) -#define SIOCGDONGLE (SIOCDEVPRIVATE + 1) -#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2) -#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3) -#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4) -#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5) -#define SIOCSMODE (SIOCDEVPRIVATE + 6) -#define SIOCGMODE (SIOCDEVPRIVATE + 7) -#define SIOCSDTRRTS (SIOCDEVPRIVATE + 8) -#define SIOCGQOS (SIOCDEVPRIVATE + 9) - -/* No reason to include just because of this one ;-) */ -#define IRNAMSIZ 16 - -/* IrDA quality of service information (must not exceed 16 bytes) */ -struct if_irda_qos { - unsigned long baudrate; - unsigned short data_size; - unsigned short window_size; - unsigned short min_turn_time; - unsigned short max_turn_time; - unsigned char add_bofs; - unsigned char link_disc; -}; - -/* For setting RTS and DTR lines of a dongle */ -struct if_irda_line { - __u8 dtr; - __u8 rts; -}; - -/* IrDA interface configuration (data part must not exceed 16 bytes) */ -struct if_irda_req { - union { - char ifrn_name[IRNAMSIZ]; /* if name, e.g. "irda0" */ - } ifr_ifrn; - - /* Data part */ - union { - struct if_irda_line ifru_line; - struct if_irda_qos ifru_qos; - unsigned short ifru_flags; - unsigned int ifru_receiving; - unsigned int ifru_mode; - unsigned int ifru_dongle; - } ifr_ifru; -}; - -#define ifr_baudrate ifr_ifru.ifru_qos.baudrate -#define ifr_receiving ifr_ifru.ifru_receiving -#define ifr_dongle ifr_ifru.ifru_dongle -#define ifr_mode ifr_ifru.ifru_mode -#define ifr_dtr ifr_ifru.ifru_line.dtr -#define ifr_rts ifr_ifru.ifru_line.rts - - -/* IrDA netlink definitions */ -#define IRDA_NL_NAME "irda" -#define IRDA_NL_VERSION 1 - -enum irda_nl_commands { - IRDA_NL_CMD_UNSPEC, - IRDA_NL_CMD_SET_MODE, - IRDA_NL_CMD_GET_MODE, - - __IRDA_NL_CMD_AFTER_LAST -}; -#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1) - -enum nl80211_attrs { - IRDA_NL_ATTR_UNSPEC, - IRDA_NL_ATTR_IFNAME, - IRDA_NL_ATTR_MODE, - - __IRDA_NL_ATTR_AFTER_LAST -}; -#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1) - -/* IrDA modes */ -#define IRDA_MODE_PRIMARY 0x1 -#define IRDA_MODE_SECONDARY 0x2 -#define IRDA_MODE_MONITOR 0x4 - -#endif /* KERNEL_IRDA_H */ - - - - -- cgit v1.2.3 From 3ff547c06a7d75d72d37dae2c064fcf0672e56c0 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 14 Mar 2018 19:05:31 +0800 Subject: sctp: add support for SCTP AUTH Information for sendmsg This patch is to add support for SCTP AUTH Information for sendmsg, as described in section 5.3.8 of RFC6458. With this option, you can provide shared key identifier used for sending the user message. It's also a necessary send info for sctp_sendv. Note that it reuses sinfo->sinfo_tsn to indicate if this option is set and sinfo->sinfo_ssn to save the shkey ID which can be 0. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index e94b6d297ad9..47e781ebde05 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -273,6 +273,18 @@ struct sctp_prinfo { __u32 pr_value; }; +/* 5.3.8 SCTP AUTH Information Structure (SCTP_AUTHINFO) + * + * This cmsghdr structure specifies SCTP options for sendmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ------------------- + * IPPROTO_SCTP SCTP_AUTHINFO struct sctp_authinfo + */ +struct sctp_authinfo { + __u16 auth_keynumber; +}; + /* * sinfo_flags: 16 bits (unsigned integer) * @@ -310,7 +322,7 @@ typedef enum sctp_cmsg_type { #define SCTP_NXTINFO SCTP_NXTINFO SCTP_PRINFO, /* 5.3.7 SCTP PR-SCTP Information Structure */ #define SCTP_PRINFO SCTP_PRINFO - SCTP_AUTHINFO, /* 5.3.8 SCTP AUTH Information Structure (RESERVED) */ + SCTP_AUTHINFO, /* 5.3.8 SCTP AUTH Information Structure */ #define SCTP_AUTHINFO SCTP_AUTHINFO SCTP_DSTADDRV4, /* 5.3.9 SCTP Destination IPv4 Address Structure */ #define SCTP_DSTADDRV4 SCTP_DSTADDRV4 -- cgit v1.2.3 From 601590ec155aadf5daa17a6f63a06d1bba5b5ce9 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 14 Mar 2018 19:05:32 +0800 Subject: sctp: add sockopt SCTP_AUTH_DEACTIVATE_KEY This patch is to add sockopt SCTP_AUTH_DEACTIVATE_KEY, as described in section 8.3.4 of RFC6458. This set option indicates that the application will no longer send user messages using the indicated key identifier. Note that RFC requires that only deactivated keys that are no longer used by an association can be deleted, but for the backward compatibility, it is not to check deactivated when deleting or replacing one sh_key. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 47e781ebde05..08fc313829f4 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -99,6 +99,7 @@ typedef __s32 sctp_assoc_t; #define SCTP_RECVRCVINFO 32 #define SCTP_RECVNXTINFO 33 #define SCTP_DEFAULT_SNDINFO 34 +#define SCTP_AUTH_DEACTIVATE_KEY 35 /* Internal Socket Options. Some of the sctp library functions are * implemented using these socket options. -- cgit v1.2.3 From ec2e506c680deaa8e1a087986db6d73ba63a04be Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 14 Mar 2018 19:05:33 +0800 Subject: sctp: add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT This patch is to add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT, as described in section 6.1.8 of RFC6458. SCTP_AUTH_FREE_KEY: This report indicates that the SCTP implementation will no longer use the key identifier specified in auth_keynumber. After deactivating a key, it would never be used again, which means it's refcnt can't be held/increased by new chunks. But there may be some chunks in out queue still using it. So only when refcnt is 1, which means no chunk in outqueue is using/holding this key either, this EVENT would be sent. When users receive this notification, they could do DEL_KEY sockopt to remove this shkey, and also tell the peer that this key won't be used in any chunk thoroughly from now on, then the peer can remove it as well safely. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 08fc313829f4..18ebbfeee4af 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -518,7 +518,11 @@ struct sctp_authkey_event { sctp_assoc_t auth_assoc_id; }; -enum { SCTP_AUTH_NEWKEY = 0, }; +enum { + SCTP_AUTH_NEW_KEY, +#define SCTP_AUTH_NEWKEY SCTP_AUTH_NEW_KEY /* compatible with before */ + SCTP_AUTH_FREE_KEY, +}; /* * 6.1.9. SCTP_SENDER_DRY_EVENT -- cgit v1.2.3 From 30f6ebf65bc46161c5aaff1db2e6e7c76aa4a06b Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 14 Mar 2018 19:05:34 +0800 Subject: sctp: add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT This patch is to add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT, as described in section 6.1.8 of RFC6458. SCTP_AUTH_NO_AUTH: This report indicates that the peer does not support SCTP authentication as defined in [RFC4895]. Note that the implementation is quite similar as that of SCTP_ADAPTATION_INDICATION. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 18ebbfeee4af..afd4346386e0 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -522,6 +522,7 @@ enum { SCTP_AUTH_NEW_KEY, #define SCTP_AUTH_NEWKEY SCTP_AUTH_NEW_KEY /* compatible with before */ SCTP_AUTH_FREE_KEY, + SCTP_AUTH_NO_AUTH, }; /* -- cgit v1.2.3 From 615755a77b2461ed78dfafb8a6649456201949c7 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Wed, 14 Mar 2018 10:23:21 -0700 Subject: bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 2a66769e5875..1e15d1724d89 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -231,6 +231,28 @@ enum bpf_attach_type { #define BPF_F_RDONLY (1U << 3) #define BPF_F_WRONLY (1U << 4) +/* Flag for stack_map, store build_id+offset instead of pointer */ +#define BPF_F_STACK_BUILD_ID (1U << 5) + +enum bpf_stack_build_id_status { + /* user space need an empty entry to identify end of a trace */ + BPF_STACK_BUILD_ID_EMPTY = 0, + /* with valid build_id and offset */ + BPF_STACK_BUILD_ID_VALID = 1, + /* couldn't get build_id, fallback to ip */ + BPF_STACK_BUILD_ID_IP = 2, +}; + +#define BPF_BUILD_ID_SIZE 20 +struct bpf_stack_build_id { + __s32 status; + unsigned char build_id[BPF_BUILD_ID_SIZE]; + union { + __u64 offset; + __u64 ip; + }; +}; + union bpf_attr { struct { /* anonymous struct used by BPF_MAP_CREATE command */ __u32 map_type; /* one of enum bpf_map_type */ -- cgit v1.2.3 From c26dd817d99bc50acf2667ee27c39414a7a6638e Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Thu, 22 Feb 2018 21:44:53 +0200 Subject: uapi: remove telephony headers ixjuser.h includes the telephony.h header. Other than that no kernel code uses any of these headers. The last user of the ixjuser.h header has been removed in commit 7326446c728 (Staging: remove telephony drivers), more than 5 years ago. Signed-off-by: Baruch Siach Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/ixjuser.h | 721 ----------------------------------------- include/uapi/linux/telephony.h | 263 --------------- 2 files changed, 984 deletions(-) delete mode 100644 include/uapi/linux/ixjuser.h delete mode 100644 include/uapi/linux/telephony.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ixjuser.h b/include/uapi/linux/ixjuser.h deleted file mode 100644 index ba245007cfe7..000000000000 --- a/include/uapi/linux/ixjuser.h +++ /dev/null @@ -1,721 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -#ifndef __LINUX_IXJUSER_H -#define __LINUX_IXJUSER_H - -/****************************************************************************** - * - * ixjuser.h - * - * Device Driver for Quicknet Technologies, Inc.'s Telephony cards - * including the Internet PhoneJACK, Internet PhoneJACK Lite, - * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and - * SmartCABLE - * - * (c) Copyright 1999-2001 Quicknet Technologies, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Author: Ed Okerson, - * - * Contributors: Greg Herlein, - * David W. Erhart, - * John Sellers, - * Mike Preston, - * - * More information about the hardware related to this driver can be found - * at our website: http://www.quicknet.net - * - * Fixes: - * - * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR - * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT - * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET - * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS - * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION - * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. - * - *****************************************************************************/ - -#include - - -/****************************************************************************** -* -* IOCTL's used for the Quicknet Telephony Cards -* -* If you use the IXJCTL_TESTRAM command, the card must be power cycled to -* reset the SRAM values before further use. -* -******************************************************************************/ - -#define IXJCTL_DSP_RESET _IO ('q', 0xC0) - -#define IXJCTL_RING PHONE_RING -#define IXJCTL_HOOKSTATE PHONE_HOOKSTATE -#define IXJCTL_MAXRINGS PHONE_MAXRINGS -#define IXJCTL_RING_CADENCE PHONE_RING_CADENCE -#define IXJCTL_RING_START PHONE_RING_START -#define IXJCTL_RING_STOP PHONE_RING_STOP - -#define IXJCTL_CARDTYPE _IOR ('q', 0xC1, int) -#define IXJCTL_SERIAL _IOR ('q', 0xC2, int) -#define IXJCTL_DSP_TYPE _IOR ('q', 0xC3, int) -#define IXJCTL_DSP_VERSION _IOR ('q', 0xC4, int) -#define IXJCTL_VERSION _IOR ('q', 0xDA, char *) -#define IXJCTL_DSP_IDLE _IO ('q', 0xC5) -#define IXJCTL_TESTRAM _IO ('q', 0xC6) - -/****************************************************************************** -* -* This group of IOCTLs deal with the record settings of the DSP -* -* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP. -* Setting a lower depth reduces latency, but increases the demand of the -* application to service the driver without frame loss. The DSP has 480 -* bytes of physical buffer memory for the record channel so the true -* maximum limit is determined by how many frames will fit in the buffer. -* -* 1 uncompressed (480 byte) 16-bit linear frame. -* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames. -* 15 TrueSpeech 8.5 frames. -* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames. -* -* The default in the driver is currently set to 2 frames. -* -* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8 -* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the -* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given -* against over-scaling, if the multiplication factor times the input -* signal exceeds 16 bits, overflow distortion will occur. The default -* setting is 0x100 (1.0). -* -* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on -* the most recently recorded frame as a 16 bit value. -******************************************************************************/ - -#define IXJCTL_REC_CODEC PHONE_REC_CODEC -#define IXJCTL_REC_START PHONE_REC_START -#define IXJCTL_REC_STOP PHONE_REC_STOP -#define IXJCTL_REC_DEPTH PHONE_REC_DEPTH -#define IXJCTL_FRAME PHONE_FRAME -#define IXJCTL_REC_VOLUME PHONE_REC_VOLUME -#define IXJCTL_REC_LEVEL PHONE_REC_LEVEL - -typedef enum { - f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50, - f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400, - f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450, - f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450, - f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587, - f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850, - f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400, - f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336, - lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860 -} IXJ_FILTER_FREQ; - -typedef struct { - unsigned int filter; - IXJ_FILTER_FREQ freq; - char enable; -} IXJ_FILTER; - -typedef struct { - char enable; - char en_filter; - unsigned int filter; - unsigned int on1; - unsigned int off1; - unsigned int on2; - unsigned int off2; - unsigned int on3; - unsigned int off3; -} IXJ_FILTER_CADENCE; - -#define IXJCTL_SET_FILTER _IOW ('q', 0xC7, IXJ_FILTER *) -#define IXJCTL_SET_FILTER_RAW _IOW ('q', 0xDD, IXJ_FILTER_RAW *) -#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0xC8, int) -#define IXJCTL_FILTER_CADENCE _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *) -#define IXJCTL_PLAY_CID _IO ('q', 0xD7) -/****************************************************************************** -* -* This IOCTL allows you to reassign values in the tone index table. The -* tone table has 32 entries (0 - 31), but the driver only allows entries -* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are -* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D. -* The positions used internally for Call Progress Tones are as follows: -* Dial Tone - 25 -* Ring Back - 26 -* Busy Signal - 27 -* -* The freq values are calculated as: -* freq = cos(2 * PI * frequency / 8000) -* -* The most commonly needed values are already calculated and listed in the -* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with -* different gains, if you are only using a single frequency set the unused -* one to 0. -* -* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB -* increments. -* -******************************************************************************/ - -typedef enum { - hz20 = 0x7ffa, - hz50 = 0x7fe5, - hz133 = 0x7f4c, - hz200 = 0x7e6b, - hz261 = 0x7d50, /* .63 C1 */ - hz277 = 0x7cfa, /* .18 CS1 */ - hz293 = 0x7c9f, /* .66 D1 */ - hz300 = 0x7c75, - hz311 = 0x7c32, /* .13 DS1 */ - hz329 = 0x7bbf, /* .63 E1 */ - hz330 = 0x7bb8, - hz340 = 0x7b75, - hz349 = 0x7b37, /* .23 F1 */ - hz350 = 0x7b30, - hz360 = 0x7ae9, - hz369 = 0x7aa8, /* .99 FS1 */ - hz380 = 0x7a56, - hz392 = 0x79fa, /* .00 G1 */ - hz400 = 0x79bb, - hz415 = 0x7941, /* .30 GS1 */ - hz420 = 0x7918, - hz425 = 0x78ee, - hz435 = 0x7899, - hz440 = 0x786d, /* .00 A1 */ - hz445 = 0x7842, - hz450 = 0x7815, - hz452 = 0x7803, - hz466 = 0x7784, /* .16 AS1 */ - hz475 = 0x7731, - hz480 = 0x7701, - hz493 = 0x7685, /* .88 B1 */ - hz494 = 0x767b, - hz500 = 0x7640, - hz520 = 0x7578, - hz523 = 0x7559, /* .25 C2 */ - hz525 = 0x7544, - hz540 = 0x74a7, - hz554 = 0x7411, /* .37 CS2 */ - hz587 = 0x72a1, /* .33 D2 */ - hz590 = 0x727f, - hz600 = 0x720b, - hz620 = 0x711e, - hz622 = 0x7106, /* .25 DS2 */ - hz659 = 0x6f3b, /* .26 E2 */ - hz660 = 0x6f2e, - hz698 = 0x6d3d, /* .46 F2 */ - hz700 = 0x6d22, - hz739 = 0x6b09, /* .99 FS2 */ - hz740 = 0x6afa, - hz750 = 0x6a6c, - hz770 = 0x694b, - hz783 = 0x688b, /* .99 G2 */ - hz800 = 0x678d, - hz816 = 0x6698, - hz830 = 0x65bf, /* .61 GS2 */ - hz850 = 0x6484, - hz857 = 0x6414, - hz880 = 0x629f, /* .00 A2 */ - hz900 = 0x6154, - hz932 = 0x5f35, /* .33 AS2 */ - hz935 = 0x5f01, - hz941 = 0x5e9a, - hz942 = 0x5e88, - hz950 = 0x5dfd, - hz975 = 0x5c44, - hz1000 = 0x5a81, - hz1020 = 0x5912, - hz1050 = 0x56e2, - hz1100 = 0x5320, - hz1140 = 0x5007, - hz1200 = 0x4b3b, - hz1209 = 0x4a80, - hz1215 = 0x4a02, - hz1250 = 0x471c, - hz1300 = 0x42e0, - hz1330 = 0x4049, - hz1336 = 0x3fc4, - hz1366 = 0x3d22, - hz1380 = 0x3be4, - hz1400 = 0x3a1b, - hz1450 = 0x3596, - hz1477 = 0x331c, - hz1500 = 0x30fb, - hz1600 = 0x278d, - hz1633 = 0x2462, - hz1638 = 0x23e7, - hz1645 = 0x233a, - hz1750 = 0x18f8, - hz1800 = 0x1405, - hz1860 = 0xe0b, - hz2100 = 0xf5f6, - hz2130 = 0xf2f5, - hz2450 = 0xd3b3, - hz2750 = 0xb8e4 -} IXJ_FREQ; - -typedef enum { - C1 = hz261, - CS1 = hz277, - D1 = hz293, - DS1 = hz311, - E1 = hz329, - F1 = hz349, - FS1 = hz369, - G1 = hz392, - GS1 = hz415, - A1 = hz440, - AS1 = hz466, - B1 = hz493, - C2 = hz523, - CS2 = hz554, - D2 = hz587, - DS2 = hz622, - E2 = hz659, - F2 = hz698, - FS2 = hz739, - G2 = hz783, - GS2 = hz830, - A2 = hz880, - AS2 = hz932, -} IXJ_NOTE; - -typedef struct { - int tone_index; - int freq0; - int gain0; - int freq1; - int gain1; -} IXJ_TONE; - -#define IXJCTL_INIT_TONE _IOW ('q', 0xC9, IXJ_TONE *) - -/****************************************************************************** -* -* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various -* Call Progress Tones (CPT). This is accomplished by setting up an array of -* IXJ_CADENCE_ELEMENT structures that sequentially define the states of -* the tone sequence. The tone_on_time and tone_off time are in -* 250 microsecond intervals. A pointer to this array is passed to the -* driver as the ce element of an IXJ_CADENCE structure. The elements_used -* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The -* termination variable defines what to do at the end of a cadence, the -* options are to play the cadence once and stop, to repeat the last -* element of the cadence indefinitely, or to repeat the entire cadence -* indefinitely. The ce variable is a pointer to the array of IXJ_TONE -* structures. If the freq0 variable is non-zero, the tone table contents -* for the tone_index are updated to the frequencies and gains defined. It -* should be noted that DTMF tones cannot be reassigned, so if DTMF tone -* table indexes are used in a cadence the frequency and gain variables will -* be ignored. -* -* If the array elements contain frequency parameters the driver will -* initialize the needed tone table elements and begin playing the tone, -* there is no preset limit on the number of elements in the cadence. If -* there is more than one frequency used in the cadence, sequential elements -* of different frequencies MUST use different tone table indexes. Only one -* cadence can be played at a time. It is possible to build complex -* cadences with multiple frequencies using 2 tone table indexes by -* alternating between them. -* -******************************************************************************/ - -typedef struct { - int index; - int tone_on_time; - int tone_off_time; - int freq0; - int gain0; - int freq1; - int gain1; -} IXJ_CADENCE_ELEMENT; - -typedef enum { - PLAY_ONCE, - REPEAT_LAST_ELEMENT, - REPEAT_ALL -} IXJ_CADENCE_TERM; - -typedef struct { - int elements_used; - IXJ_CADENCE_TERM termination; - IXJ_CADENCE_ELEMENT __user *ce; -} IXJ_CADENCE; - -#define IXJCTL_TONE_CADENCE _IOW ('q', 0xCA, IXJ_CADENCE *) -/****************************************************************************** -* -* This group of IOCTLs deal with the playback settings of the DSP -* -******************************************************************************/ - -#define IXJCTL_PLAY_CODEC PHONE_PLAY_CODEC -#define IXJCTL_PLAY_START PHONE_PLAY_START -#define IXJCTL_PLAY_STOP PHONE_PLAY_STOP -#define IXJCTL_PLAY_DEPTH PHONE_PLAY_DEPTH -#define IXJCTL_PLAY_VOLUME PHONE_PLAY_VOLUME -#define IXJCTL_PLAY_LEVEL PHONE_PLAY_LEVEL - -/****************************************************************************** -* -* This group of IOCTLs deal with the Acoustic Echo Cancellation settings -* of the DSP -* -* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the -* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar -* controls. IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC. -******************************************************************************/ -#define IXJCTL_AEC_START _IOW ('q', 0xCB, int) -#define IXJCTL_AEC_STOP _IO ('q', 0xCC) -#define IXJCTL_AEC_GET_LEVEL _IO ('q', 0xCD) - -#define AEC_OFF 0 -#define AEC_LOW 1 -#define AEC_MED 2 -#define AEC_HIGH 3 -#define AEC_AUTO 4 -#define AEC_AGC 5 -/****************************************************************************** -* -* Call Progress Tones, DTMF, etc. -* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band -* only. If you pass a 1, DTMF is suppressed from the audio stream. -* Tone on and off times are in 250 microsecond intervals so -* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360); -* will set the tone on time of board ixj1 to 360 * 250us = 90ms -* the default values of tone on and off times is 840 or 210ms -******************************************************************************/ - -#define IXJCTL_DTMF_READY PHONE_DTMF_READY -#define IXJCTL_GET_DTMF PHONE_GET_DTMF -#define IXJCTL_GET_DTMF_ASCII PHONE_GET_DTMF_ASCII -#define IXJCTL_DTMF_OOB PHONE_DTMF_OOB -#define IXJCTL_EXCEPTION PHONE_EXCEPTION -#define IXJCTL_PLAY_TONE PHONE_PLAY_TONE -#define IXJCTL_SET_TONE_ON_TIME PHONE_SET_TONE_ON_TIME -#define IXJCTL_SET_TONE_OFF_TIME PHONE_SET_TONE_OFF_TIME -#define IXJCTL_GET_TONE_ON_TIME PHONE_GET_TONE_ON_TIME -#define IXJCTL_GET_TONE_OFF_TIME PHONE_GET_TONE_OFF_TIME -#define IXJCTL_GET_TONE_STATE PHONE_GET_TONE_STATE -#define IXJCTL_BUSY PHONE_BUSY -#define IXJCTL_RINGBACK PHONE_RINGBACK -#define IXJCTL_DIALTONE PHONE_DIALTONE -#define IXJCTL_CPT_STOP PHONE_CPT_STOP - -/****************************************************************************** -* LineJACK specific IOCTLs -* -* The lsb 4 bits of the LED argument represent the state of each of the 4 -* LED's on the LineJACK -******************************************************************************/ - -#define IXJCTL_SET_LED _IOW ('q', 0xCE, int) -#define IXJCTL_MIXER _IOW ('q', 0xCF, int) - -/****************************************************************************** -* -* The master volume controls use attenuation with 32 levels from 0 to -62dB -* with steps of 2dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_MASTER_L 0x0000 -#define MIXER_MASTER_R 0x0100 -#define ATT00DB 0x00 -#define ATT02DB 0x01 -#define ATT04DB 0x02 -#define ATT06DB 0x03 -#define ATT08DB 0x04 -#define ATT10DB 0x05 -#define ATT12DB 0x06 -#define ATT14DB 0x07 -#define ATT16DB 0x08 -#define ATT18DB 0x09 -#define ATT20DB 0x0A -#define ATT22DB 0x0B -#define ATT24DB 0x0C -#define ATT26DB 0x0D -#define ATT28DB 0x0E -#define ATT30DB 0x0F -#define ATT32DB 0x10 -#define ATT34DB 0x11 -#define ATT36DB 0x12 -#define ATT38DB 0x13 -#define ATT40DB 0x14 -#define ATT42DB 0x15 -#define ATT44DB 0x16 -#define ATT46DB 0x17 -#define ATT48DB 0x18 -#define ATT50DB 0x19 -#define ATT52DB 0x1A -#define ATT54DB 0x1B -#define ATT56DB 0x1C -#define ATT58DB 0x1D -#define ATT60DB 0x1E -#define ATT62DB 0x1F -#define MASTER_MUTE 0x80 - -/****************************************************************************** -* -* The input volume controls use gain with 32 levels from +12dB to -50dB -* with steps of 2dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_PORT_CD_L 0x0600 -#define MIXER_PORT_CD_R 0x0700 -#define MIXER_PORT_LINE_IN_L 0x0800 -#define MIXER_PORT_LINE_IN_R 0x0900 -#define MIXER_PORT_POTS_REC 0x0C00 -#define MIXER_PORT_MIC 0x0E00 - -#define GAIN12DB 0x00 -#define GAIN10DB 0x01 -#define GAIN08DB 0x02 -#define GAIN06DB 0x03 -#define GAIN04DB 0x04 -#define GAIN02DB 0x05 -#define GAIN00DB 0x06 -#define GAIN_02DB 0x07 -#define GAIN_04DB 0x08 -#define GAIN_06DB 0x09 -#define GAIN_08DB 0x0A -#define GAIN_10DB 0x0B -#define GAIN_12DB 0x0C -#define GAIN_14DB 0x0D -#define GAIN_16DB 0x0E -#define GAIN_18DB 0x0F -#define GAIN_20DB 0x10 -#define GAIN_22DB 0x11 -#define GAIN_24DB 0x12 -#define GAIN_26DB 0x13 -#define GAIN_28DB 0x14 -#define GAIN_30DB 0x15 -#define GAIN_32DB 0x16 -#define GAIN_34DB 0x17 -#define GAIN_36DB 0x18 -#define GAIN_38DB 0x19 -#define GAIN_40DB 0x1A -#define GAIN_42DB 0x1B -#define GAIN_44DB 0x1C -#define GAIN_46DB 0x1D -#define GAIN_48DB 0x1E -#define GAIN_50DB 0x1F -#define INPUT_MUTE 0x80 - -/****************************************************************************** -* -* The POTS volume control use attenuation with 8 levels from 0dB to -28dB -* with steps of 4dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_PORT_POTS_PLAY 0x0F00 - -#define POTS_ATT_00DB 0x00 -#define POTS_ATT_04DB 0x01 -#define POTS_ATT_08DB 0x02 -#define POTS_ATT_12DB 0x03 -#define POTS_ATT_16DB 0x04 -#define POTS_ATT_20DB 0x05 -#define POTS_ATT_24DB 0x06 -#define POTS_ATT_28DB 0x07 -#define POTS_MUTE 0x80 - -/****************************************************************************** -* -* The DAA controls the interface to the PSTN port. The driver loads the -* US coefficients by default, so if you live in a different country you -* need to load the set for your countries phone system. -* -******************************************************************************/ -#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD0, int) - -#define DAA_US 1 /*PITA 8kHz */ -#define DAA_UK 2 /*ISAR34 8kHz */ -#define DAA_FRANCE 3 /* */ -#define DAA_GERMANY 4 -#define DAA_AUSTRALIA 5 -#define DAA_JAPAN 6 - -/****************************************************************************** -* -* Use IXJCTL_PORT to set or query the port the card is set to. If the -* argument is set to PORT_QUERY, the return value of the ioctl will -* indicate which port is currently in use, otherwise it will change the -* port. -* -******************************************************************************/ -#define IXJCTL_PORT _IOW ('q', 0xD1, int) - -#define PORT_QUERY 0 -#define PORT_POTS 1 -#define PORT_PSTN 2 -#define PORT_SPEAKER 3 -#define PORT_HANDSET 4 - -#define IXJCTL_PSTN_SET_STATE PHONE_PSTN_SET_STATE -#define IXJCTL_PSTN_GET_STATE PHONE_PSTN_GET_STATE - -#define PSTN_ON_HOOK 0 -#define PSTN_RINGING 1 -#define PSTN_OFF_HOOK 2 -#define PSTN_PULSE_DIAL 3 - -/****************************************************************************** -* -* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), -* and the transmit gain (AGX). OR together the components and pass them -* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB. -* -******************************************************************************/ -#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD2, int) - -#define AGRR00DB 0x00 /* Analog gain in receive direction 0dB */ -#define AGRR3_5DB 0x10 /* Analog gain in receive direction 3.5dB */ -#define AGRR06DB 0x30 /* Analog gain in receive direction 6dB */ - -#define AGX00DB 0x00 /* Analog gain in transmit direction 0dB */ -#define AGX_6DB 0x04 /* Analog gain in transmit direction -6dB */ -#define AGX3_5DB 0x08 /* Analog gain in transmit direction 3.5dB */ -#define AGX_2_5B 0x0C /* Analog gain in transmit direction -2.5dB */ - -#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD3) - -#define IXJCTL_CID _IOR ('q', 0xD4, PHONE_CID *) -#define IXJCTL_VMWI _IOR ('q', 0xD8, int) -#define IXJCTL_CIDCW _IOW ('q', 0xD9, PHONE_CID *) -/****************************************************************************** -* -* The wink duration is tunable with this ioctl. The default wink duration -* is 320ms. You do not need to use this ioctl if you do not require a -* different wink duration. -* -******************************************************************************/ -#define IXJCTL_WINK_DURATION PHONE_WINK_DURATION - -/****************************************************************************** -* -* This ioctl will connect the POTS port to the PSTN port on the LineJACK -* In order for this to work properly the port selection should be set to -* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will -* enable conference calls between PSTN callers and network callers. -* Passing a 1 to this ioctl enables the POTS<->PSTN connection while -* passing a 0 turns it back off. -* -******************************************************************************/ -#define IXJCTL_POTS_PSTN _IOW ('q', 0xD5, int) - -/****************************************************************************** -* -* IOCTLs added by request. -* -* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in -* /usr/include/asm/param.h, this determines the fundamental -* frequency of the clock ticks on your Linux system. The kernel -* must be rebuilt if you change this value, also all modules you -* use (except this one) must be recompiled. The default value -* is 100, and you only need to use this IOCTL if you use some -* other value. -* -* -* IXJCTL_RATE sets the number of times per second that the driver polls -* the DSP. This value cannot be larger than HZ. By -* increasing both of these values, you may be able to reduce -* latency because the max hang time that can exist between the -* driver and the DSP will be reduced. -* -******************************************************************************/ - -#define IXJCTL_HZ _IOW ('q', 0xE0, int) -#define IXJCTL_RATE _IOW ('q', 0xE1, int) -#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long) -#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long) -#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long) -#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long) -#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long) -#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7) -#define IXJCTL_DTMF_PRESCALE _IOW ('q', 0xE8, int) - -/****************************************************************************** -* -* This ioctl allows the user application to control what events the driver -* will send signals for, and what signals it will send for which event. -* By default, if signaling is enabled, all events will send SIGIO when -* they occur. To disable signals for an event set the signal to 0. -* -******************************************************************************/ -typedef enum { - SIG_DTMF_READY, - SIG_HOOKSTATE, - SIG_FLASH, - SIG_PSTN_RING, - SIG_CALLER_ID, - SIG_PSTN_WINK, - SIG_F0, SIG_F1, SIG_F2, SIG_F3, - SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3, - SIG_READ_READY = 33, - SIG_WRITE_READY = 34 -} IXJ_SIGEVENT; - -typedef struct { - unsigned int event; - int signal; -} IXJ_SIGDEF; - -#define IXJCTL_SIGCTL _IOW ('q', 0xE9, IXJ_SIGDEF *) - -/****************************************************************************** -* -* These ioctls allow the user application to change the gain in the -* Smart Cable of the Internet Phone Card. Sending -1 as a value will cause -* return value to be the current setting. Valid values to set are 0x00 - 0x1F -* -* 11111 = +12 dB -* 10111 = 0 dB -* 00000 = -34.5 dB -* -* IXJCTL_SC_RXG sets the Receive gain -* IXJCTL_SC_TXG sets the Transmit gain -* -******************************************************************************/ -#define IXJCTL_SC_RXG _IOW ('q', 0xEA, int) -#define IXJCTL_SC_TXG _IOW ('q', 0xEB, int) - -/****************************************************************************** -* -* The intercom IOCTL's short the output from one card to the input of the -* other and vice versa (actually done in the DSP read function). It is only -* necessary to execute the IOCTL on one card, but it is necessary to have -* both devices open to be able to detect hook switch changes. The record -* codec and rate of each card must match the playback codec and rate of -* the other card for this to work properly. -* -******************************************************************************/ - -#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int) -#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int) - -/****************************************************************************** - * - * new structure for accessing raw filter information - * - ******************************************************************************/ - -typedef struct { - unsigned int filter; - char enable; - unsigned int coeff[19]; -} IXJ_FILTER_RAW; - -#endif diff --git a/include/uapi/linux/telephony.h b/include/uapi/linux/telephony.h deleted file mode 100644 index d2c9f7105f4b..000000000000 --- a/include/uapi/linux/telephony.h +++ /dev/null @@ -1,263 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/****************************************************************************** - * - * telephony.h - * - * Basic Linux Telephony Interface - * - * (c) Copyright 1999-2001 Quicknet Technologies, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Authors: Ed Okerson, - * Greg Herlein, - * - * Contributors: Alan Cox, - * David W. Erhart, - * - * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR - * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT - * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET - * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS - * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION - * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. - * - *****************************************************************************/ - -#ifndef TELEPHONY_H -#define TELEPHONY_H - -#define TELEPHONY_VERSION 3013 - -#define PHONE_VENDOR_IXJ 1 -#define PHONE_VENDOR_QUICKNET PHONE_VENDOR_IXJ -#define PHONE_VENDOR_VOICETRONIX 2 -#define PHONE_VENDOR_ACULAB 3 -#define PHONE_VENDOR_DIGI 4 -#define PHONE_VENDOR_FRANKLIN 5 - -/****************************************************************************** - * Vendor Summary Information Area - * - * Quicknet Technologies, Inc. - makes low density analog telephony cards - * with audio compression, POTS and PSTN interfaces (www.quicknet.net) - * - * (other vendors following this API shuld add a short description of - * the telephony products they support under Linux) - * - *****************************************************************************/ -#define QTI_PHONEJACK 100 -#define QTI_LINEJACK 300 -#define QTI_PHONEJACK_LITE 400 -#define QTI_PHONEJACK_PCI 500 -#define QTI_PHONECARD 600 - -/****************************************************************************** -* -* The capabilities ioctls can inform you of the capabilities of each phone -* device installed in your system. The PHONECTL_CAPABILITIES ioctl -* returns an integer value indicating the number of capabilities the -* device has. The PHONECTL_CAPABILITIES_LIST will fill an array of -* capability structs with all of its capabilities. The -* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns -* a TRUE if the device has that capability, otherwise it returns false. -* -******************************************************************************/ -typedef enum { - vendor = 0, - device, - port, - codec, - dsp -} phone_cap; - -struct phone_capability { - char desc[80]; - phone_cap captype; - int cap; - int handle; -}; - -typedef enum { - pots = 0, - pstn, - handset, - speaker -} phone_ports; - -#define PHONE_CAPABILITIES _IO ('q', 0x80) -#define PHONE_CAPABILITIES_LIST _IOR ('q', 0x81, struct phone_capability *) -#define PHONE_CAPABILITIES_CHECK _IOW ('q', 0x82, struct phone_capability *) - -typedef struct { - char month[3]; - char day[3]; - char hour[3]; - char min[3]; - int numlen; - char number[11]; - int namelen; - char name[80]; -} PHONE_CID; - -#define PHONE_RING _IO ('q', 0x83) -#define PHONE_HOOKSTATE _IO ('q', 0x84) -#define PHONE_MAXRINGS _IOW ('q', 0x85, char) -#define PHONE_RING_CADENCE _IOW ('q', 0x86, short) -#define OLD_PHONE_RING_START _IO ('q', 0x87) -#define PHONE_RING_START _IOW ('q', 0x87, PHONE_CID *) -#define PHONE_RING_STOP _IO ('q', 0x88) - -#define USA_RING_CADENCE 0xC0C0 - -#define PHONE_REC_CODEC _IOW ('q', 0x89, int) -#define PHONE_REC_START _IO ('q', 0x8A) -#define PHONE_REC_STOP _IO ('q', 0x8B) -#define PHONE_REC_DEPTH _IOW ('q', 0x8C, int) -#define PHONE_FRAME _IOW ('q', 0x8D, int) -#define PHONE_REC_VOLUME _IOW ('q', 0x8E, int) -#define PHONE_REC_VOLUME_LINEAR _IOW ('q', 0xDB, int) -#define PHONE_REC_LEVEL _IO ('q', 0x8F) - -#define PHONE_PLAY_CODEC _IOW ('q', 0x90, int) -#define PHONE_PLAY_START _IO ('q', 0x91) -#define PHONE_PLAY_STOP _IO ('q', 0x92) -#define PHONE_PLAY_DEPTH _IOW ('q', 0x93, int) -#define PHONE_PLAY_VOLUME _IOW ('q', 0x94, int) -#define PHONE_PLAY_VOLUME_LINEAR _IOW ('q', 0xDC, int) -#define PHONE_PLAY_LEVEL _IO ('q', 0x95) -#define PHONE_DTMF_READY _IOR ('q', 0x96, int) -#define PHONE_GET_DTMF _IOR ('q', 0x97, int) -#define PHONE_GET_DTMF_ASCII _IOR ('q', 0x98, int) -#define PHONE_DTMF_OOB _IOW ('q', 0x99, int) -#define PHONE_EXCEPTION _IOR ('q', 0x9A, int) -#define PHONE_PLAY_TONE _IOW ('q', 0x9B, char) -#define PHONE_SET_TONE_ON_TIME _IOW ('q', 0x9C, int) -#define PHONE_SET_TONE_OFF_TIME _IOW ('q', 0x9D, int) -#define PHONE_GET_TONE_ON_TIME _IO ('q', 0x9E) -#define PHONE_GET_TONE_OFF_TIME _IO ('q', 0x9F) -#define PHONE_GET_TONE_STATE _IO ('q', 0xA0) -#define PHONE_BUSY _IO ('q', 0xA1) -#define PHONE_RINGBACK _IO ('q', 0xA2) -#define PHONE_DIALTONE _IO ('q', 0xA3) -#define PHONE_CPT_STOP _IO ('q', 0xA4) - -#define PHONE_PSTN_SET_STATE _IOW ('q', 0xA4, int) -#define PHONE_PSTN_GET_STATE _IO ('q', 0xA5) - -#define PSTN_ON_HOOK 0 -#define PSTN_RINGING 1 -#define PSTN_OFF_HOOK 2 -#define PSTN_PULSE_DIAL 3 - -/****************************************************************************** -* -* The wink duration is tunable with this ioctl. The default wink duration -* is 320ms. You do not need to use this ioctl if you do not require a -* different wink duration. -* -******************************************************************************/ -#define PHONE_WINK_DURATION _IOW ('q', 0xA6, int) -#define PHONE_WINK _IOW ('q', 0xAA, int) - -/****************************************************************************** -* -* Codec Definitions -* -******************************************************************************/ -typedef enum { - G723_63 = 1, - G723_53 = 2, - TS85 = 3, - TS48 = 4, - TS41 = 5, - G728 = 6, - G729 = 7, - ULAW = 8, - ALAW = 9, - LINEAR16 = 10, - LINEAR8 = 11, - WSS = 12, - G729B = 13 -} phone_codec; - -struct phone_codec_data -{ - phone_codec type; - unsigned short buf_min, buf_opt, buf_max; -}; - -#define PHONE_QUERY_CODEC _IOWR ('q', 0xA7, struct phone_codec_data *) -#define PHONE_PSTN_LINETEST _IO ('q', 0xA8) - -/****************************************************************************** -* -* This controls the VAD/CNG functionality of G.723.1. The driver will -* always pass full size frames, any unused bytes will be padded with zeros, -* and frames passed to the driver should also be padded with zeros. The -* frame type is encoded in the least significant two bits of the first -* WORD of the frame as follows: -* -* bits 1-0 Frame Type Data Rate Significant Words -* 00 0 G.723.1 6.3 12 -* 01 1 G.723.1 5.3 10 -* 10 2 VAD/CNG 2 -* 11 3 Repeat last CNG 2 bits -* -******************************************************************************/ -#define PHONE_VAD _IOW ('q', 0xA9, int) - - -/****************************************************************************** -* -* The exception structure allows us to multiplex multiple events onto the -* select() exception set. If any of these flags are set select() will -* return with a positive indication on the exception set. The dtmf_ready -* bit indicates if there is data waiting in the DTMF buffer. The -* hookstate bit is set if there is a change in hookstate status, it does not -* indicate the current state of the hookswitch. The pstn_ring bit -* indicates that the DAA on a LineJACK card has detected ring voltage on -* the PSTN port. The caller_id bit indicates that caller_id data has been -* received and is available. The pstn_wink bit indicates that the DAA on -* the LineJACK has received a wink from the telco switch. The f0, f1, f2 -* and f3 bits indicate that the filter has been triggered by detecting the -* frequency programmed into that filter. -* -* The remaining bits should be set to zero. They will become defined over time -* for other interface cards and their needs. -* -******************************************************************************/ -struct phone_except -{ - unsigned int dtmf_ready:1; - unsigned int hookstate:1; - unsigned int pstn_ring:1; - unsigned int caller_id:1; - unsigned int pstn_wink:1; - unsigned int f0:1; - unsigned int f1:1; - unsigned int f2:1; - unsigned int f3:1; - unsigned int flash:1; - unsigned int fc0:1; - unsigned int fc1:1; - unsigned int fc2:1; - unsigned int fc3:1; - unsigned int reserved:18; -}; - -union telephony_exception { - struct phone_except bits; - unsigned int bytes; -}; - - -#endif /* TELEPHONY_H */ - -- cgit v1.2.3 From 7156d194a0772f733865267e7207e0b08f81b02b Mon Sep 17 00:00:00 2001 From: Yousuk Seung Date: Fri, 16 Mar 2018 10:51:07 -0700 Subject: tcp: add snd_ssthresh stat in SCM_TIMESTAMPING_OPT_STATS This patch adds TCP_NLA_SND_SSTHRESH stat into SCM_TIMESTAMPING_OPT_STATS that reports tcp_sock.snd_ssthresh. Signed-off-by: Yousuk Seung Signed-off-by: Neal Cardwell Signed-off-by: Priyaranjan Jha Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Yuchung Cheng Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 4c0ae0faf7ca..560374c978f9 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -243,6 +243,7 @@ enum { TCP_NLA_DELIVERY_RATE_APP_LMT, /* delivery rate application limited ? */ TCP_NLA_SNDQ_SIZE, /* Data (bytes) pending in send queue */ TCP_NLA_CA_STATE, /* ca_state of socket */ + TCP_NLA_SND_SSTHRESH, /* Slow start size threshold */ }; -- cgit v1.2.3 From 4d5422cea3b61f158d58924cbb43feada456ba5c Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Mon, 12 Mar 2018 04:53:02 -0700 Subject: KVM: X86: Provide a capability to disable MWAIT intercepts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Allowing a guest to execute MWAIT without interception enables a guest to put a (physical) CPU into a power saving state, where it takes longer to return from than what may be desired by the host. Don't give a guest that power over a host by default. (Especially, since nothing prevents a guest from using MWAIT even when it is not advertised via CPUID.) Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Jan H. Schönherr Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- include/uapi/linux/kvm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 088c2c92db55..1065006c9bf5 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -929,7 +929,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_GS 140 #define KVM_CAP_S390_AIS 141 #define KVM_CAP_SPAPR_TCE_VFIO 142 -#define KVM_CAP_X86_GUEST_MWAIT 143 +#define KVM_CAP_X86_DISABLE_EXITS 143 #define KVM_CAP_ARM_USER_IRQ 144 #define KVM_CAP_S390_CMMA_MIGRATION 145 #define KVM_CAP_PPC_FWNMI 146 -- cgit v1.2.3 From 233bde21aa43516baa013ef7ac33f3427056db3e Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 14 Mar 2018 15:48:06 -0700 Subject: block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into It happens often while I'm preparing a patch for a block driver that I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT available for this driver? Do I have to introduce definitions of these constants before I can use these constants? To avoid this confusion, move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the header file such that these become available for all block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h header file conditional to avoid that including that header file after causes the compiler to complain about a SECTOR_SIZE redefinition. Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have not been removed from uapi header files nor from NAND drivers in which these constants are used for another purpose than converting block layer offsets and sizes into a number of sectors. Cc: David S. Miller Cc: Mike Snitzer Cc: Dan Williams Cc: Minchan Kim Cc: Nitin Gupta Reviewed-by: Sergey Senozhatsky Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Martin K. Petersen Signed-off-by: Bart Van Assche Signed-off-by: Jens Axboe --- include/uapi/linux/msdos_fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h index a45d0754102e..fde753735aba 100644 --- a/include/uapi/linux/msdos_fs.h +++ b/include/uapi/linux/msdos_fs.h @@ -10,7 +10,9 @@ * The MS-DOS filesystem constants/structures */ +#ifndef SECTOR_SIZE #define SECTOR_SIZE 512 /* sector size (bytes) */ +#endif #define SECTOR_BITS 9 /* log2(SECTOR_SIZE) */ #define MSDOS_DPB (MSDOS_DPS) /* dir entries per block */ #define MSDOS_DPB_BITS 4 /* log2(MSDOS_DPB) */ -- cgit v1.2.3 From 928df1880e24bcd47d6359ff86df24db3dfba3c3 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Thu, 15 Mar 2018 16:48:51 +0100 Subject: tipc: obsolete TIPC_ZONE_SCOPE Publications for TIPC_CLUSTER_SCOPE and TIPC_ZONE_SCOPE are in all aspects handled the same way, both on the publishing node and on the receiving nodes. Despite previous ambitions to the contrary, this is never going to change, so we take the conseqeunce of this and obsolete TIPC_ZONE_SCOPE and related macros/functions. Whenever a user is doing a bind() or a sendmsg() attempt using ZONE_SCOPE we translate this internally to CLUSTER_SCOPE, while we remain compatible with users and remote nodes still using ZONE_SCOPE. Furthermore, the non-formalized scope value 0 has always been permitted for use during lookup, with the same meaning as ZONE_SCOPE/CLUSTER_SCOPE. We now permit it even as binding scope, but for compatibility reasons we choose to not change the value of TIPC_CLUSTER_SCOPE. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- include/uapi/linux/tipc.h | 102 ++++++++++++++++++++++++---------------------- 1 file changed, 54 insertions(+), 48 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index 14bacc7e6cef..4ac9f1f02b06 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -61,50 +61,6 @@ struct tipc_name_seq { __u32 upper; }; -/* TIPC Address Size, Offset, Mask specification for Z.C.N - */ -#define TIPC_NODE_BITS 12 -#define TIPC_CLUSTER_BITS 12 -#define TIPC_ZONE_BITS 8 - -#define TIPC_NODE_OFFSET 0 -#define TIPC_CLUSTER_OFFSET TIPC_NODE_BITS -#define TIPC_ZONE_OFFSET (TIPC_CLUSTER_OFFSET + TIPC_CLUSTER_BITS) - -#define TIPC_NODE_SIZE ((1UL << TIPC_NODE_BITS) - 1) -#define TIPC_CLUSTER_SIZE ((1UL << TIPC_CLUSTER_BITS) - 1) -#define TIPC_ZONE_SIZE ((1UL << TIPC_ZONE_BITS) - 1) - -#define TIPC_NODE_MASK (TIPC_NODE_SIZE << TIPC_NODE_OFFSET) -#define TIPC_CLUSTER_MASK (TIPC_CLUSTER_SIZE << TIPC_CLUSTER_OFFSET) -#define TIPC_ZONE_MASK (TIPC_ZONE_SIZE << TIPC_ZONE_OFFSET) - -#define TIPC_ZONE_CLUSTER_MASK (TIPC_ZONE_MASK | TIPC_CLUSTER_MASK) - -static inline __u32 tipc_addr(unsigned int zone, - unsigned int cluster, - unsigned int node) -{ - return (zone << TIPC_ZONE_OFFSET) | - (cluster << TIPC_CLUSTER_OFFSET) | - node; -} - -static inline unsigned int tipc_zone(__u32 addr) -{ - return addr >> TIPC_ZONE_OFFSET; -} - -static inline unsigned int tipc_cluster(__u32 addr) -{ - return (addr & TIPC_CLUSTER_MASK) >> TIPC_CLUSTER_OFFSET; -} - -static inline unsigned int tipc_node(__u32 addr) -{ - return addr & TIPC_NODE_MASK; -} - /* * Application-accessible port name types */ @@ -117,9 +73,10 @@ static inline unsigned int tipc_node(__u32 addr) /* * Publication scopes when binding port names and port name sequences */ -#define TIPC_ZONE_SCOPE 1 -#define TIPC_CLUSTER_SCOPE 2 -#define TIPC_NODE_SCOPE 3 +enum tipc_scope { + TIPC_CLUSTER_SCOPE = 2, /* 0 can also be used */ + TIPC_NODE_SCOPE = 3 +}; /* * Limiting values for messages @@ -243,7 +200,7 @@ struct sockaddr_tipc { struct tipc_group_req { __u32 type; /* group id */ __u32 instance; /* member id */ - __u32 scope; /* zone/cluster/node */ + __u32 scope; /* cluster/node */ __u32 flags; }; @@ -268,4 +225,53 @@ struct tipc_sioc_ln_req { __u32 bearer_id; char linkname[TIPC_MAX_LINK_NAME]; }; + + +/* The macros and functions below are deprecated: + */ + +#define TIPC_ZONE_SCOPE 1 + +#define TIPC_NODE_BITS 12 +#define TIPC_CLUSTER_BITS 12 +#define TIPC_ZONE_BITS 8 + +#define TIPC_NODE_OFFSET 0 +#define TIPC_CLUSTER_OFFSET TIPC_NODE_BITS +#define TIPC_ZONE_OFFSET (TIPC_CLUSTER_OFFSET + TIPC_CLUSTER_BITS) + +#define TIPC_NODE_SIZE ((1UL << TIPC_NODE_BITS) - 1) +#define TIPC_CLUSTER_SIZE ((1UL << TIPC_CLUSTER_BITS) - 1) +#define TIPC_ZONE_SIZE ((1UL << TIPC_ZONE_BITS) - 1) + +#define TIPC_NODE_MASK (TIPC_NODE_SIZE << TIPC_NODE_OFFSET) +#define TIPC_CLUSTER_MASK (TIPC_CLUSTER_SIZE << TIPC_CLUSTER_OFFSET) +#define TIPC_ZONE_MASK (TIPC_ZONE_SIZE << TIPC_ZONE_OFFSET) + +#define TIPC_ZONE_CLUSTER_MASK (TIPC_ZONE_MASK | TIPC_CLUSTER_MASK) + +static inline __u32 tipc_addr(unsigned int zone, + unsigned int cluster, + unsigned int node) +{ + return (zone << TIPC_ZONE_OFFSET) | + (cluster << TIPC_CLUSTER_OFFSET) | + node; +} + +static inline unsigned int tipc_zone(__u32 addr) +{ + return addr >> TIPC_ZONE_OFFSET; +} + +static inline unsigned int tipc_cluster(__u32 addr) +{ + return (addr & TIPC_CLUSTER_MASK) >> TIPC_CLUSTER_OFFSET; +} + +static inline unsigned int tipc_node(__u32 addr) +{ + return addr & TIPC_NODE_MASK; +} + #endif -- cgit v1.2.3 From a84d1169164b274f13b97a23ff235c000efe3b49 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 15 Mar 2018 17:12:40 +0100 Subject: y2038: Introduce struct __kernel_old_timeval Dealing with 'struct timeval' users in the y2038 series is a bit tricky: We have two definitions of timeval that are visible to user space, one comes from glibc (or some other C library), the other comes from linux/time.h. The kernel copy is what we want to be used for a number of structures defined by the kernel itself, e.g. elf_prstatus (used it core dumps), sysinfo and rusage (used in system calls). These generally tend to be used for passing time intervals rather than absolute (epoch-based) times, so they do not suffer from the y2038 overflow. Some of them could be changed to use 64-bit timestamps by creating new system calls, others like the core files cannot easily be changed. An application using these interfaces likely also uses gettimeofday() or other interfaces that use absolute times, and pass 'struct timeval' pointers directly into kernel interfaces, so glibc must redefine their timeval based on a 64-bit time_t when they introduce their y2038-safe interfaces. The only reasonable way forward I see is to remove the 'timeval' definion from the kernel's uapi headers, and change the interfaces that we do not want to (or cannot) duplicate for 64-bit times to use a new __kernel_old_timeval definition instead. This type should be avoided for all new interfaces (those can use 64-bit nanoseconds, or the 64-bit version of timespec instead), and should be used with great care when converting existing interfaces from timeval, to be sure they don't suffer from the y2038 overflow, and only with consensus for the particular user that using __kernel_old_timeval is better than moving to a 64-bit based interface. The structure name is intentionally chosen to not conflict with user space types, and to be ugly enough to discourage its use. Note that ioctl based interfaces that pass a bare 'timeval' pointer cannot change to '__kernel_old_timeval' because the user space source code refers to 'timeval' instead, and we don't want to modify the user space sources if possible. However, any application that relies on a structure to contain an embedded 'timeval' (e.g. by passing a pointer to the member into a function call that expects a timeval pointer) is broken when that structure gets converted to __kernel_old_timeval. I don't see any way around that, and we have to rely on the compiler to produce a warning or compile failure that will alert users when they recompile their sources against a new libc. Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Gleixner Cc: Stephen Boyd Cc: John Stultz Cc: Al Viro Link: https://lkml.kernel.org/r/20180315161739.576085-1-arnd@arndb.de --- include/uapi/linux/time.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h index 61a187df8da2..16a296612ba4 100644 --- a/include/uapi/linux/time.h +++ b/include/uapi/linux/time.h @@ -42,6 +42,18 @@ struct itimerval { struct timeval it_value; /* current value */ }; +/* + * legacy timeval structure, only embedded in structures that + * traditionally used 'timeval' to pass time intervals (not absolute + * times). Do not add new users. If user space fails to compile + * here, this is probably because it is not y2038 safe and needs to + * be changed to use another interface. + */ +struct __kernel_old_timeval { + __kernel_long_t tv_sec; + __kernel_long_t tv_usec; +}; + /* * The IDs of the various system clocks (for POSIX.1b interval timers): */ -- cgit v1.2.3 From 4f738adba30a7cfc006f605707e7aee847ffefa0 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sun, 18 Mar 2018 12:57:10 -0700 Subject: bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data This implements a BPF ULP layer to allow policy enforcement and monitoring at the socket layer. In order to support this a new program type BPF_PROG_TYPE_SK_MSG is used to run the policy at the sendmsg/sendpage hook. To attach the policy to sockets a sockmap is used with a new program attach type BPF_SK_MSG_VERDICT. Similar to previous sockmap usages when a sock is added to a sockmap, via a map update, if the map contains a BPF_SK_MSG_VERDICT program type attached then the BPF ULP layer is created on the socket and the attached BPF_PROG_TYPE_SK_MSG program is run for every msg in sendmsg case and page/offset in sendpage case. BPF_PROG_TYPE_SK_MSG Semantics/API: BPF_PROG_TYPE_SK_MSG supports only two return codes SK_PASS and SK_DROP. Returning SK_DROP free's the copied data in the sendmsg case and in the sendpage case leaves the data untouched. Both cases return -EACESS to the user. Returning SK_PASS will allow the msg to be sent. In the sendmsg case data is copied into kernel space buffers before running the BPF program. The kernel space buffers are stored in a scatterlist object where each element is a kernel memory buffer. Some effort is made to coalesce data from the sendmsg call here. For example a sendmsg call with many one byte iov entries will likely be pushed into a single entry. The BPF program is run with data pointers (start/end) pointing to the first sg element. In the sendpage case data is not copied. We opt not to copy the data by default here, because the BPF infrastructure does not know what bytes will be needed nor when they will be needed. So copying all bytes may be wasteful. Because of this the initial start/end data pointers are (0,0). Meaning no data can be read or written. This avoids reading data that may be modified by the user. A new helper is added later in this series if reading and writing the data is needed. The helper call will do a copy by default so that the page is exclusively owned by the BPF call. The verdict from the BPF_PROG_TYPE_SK_MSG applies to the entire msg in the sendmsg() case and the entire page/offset in the sendpage case. This avoids ambiguity on how to handle mixed return codes in the sendmsg case. Again a helper is added later in the series if a verdict needs to apply to multiple system calls and/or only a subpart of the currently being processed message. The helper msg_redirect_map() can be used to select the socket to send the data on. This is used similar to existing redirect use cases. This allows policy to redirect msgs. Pseudo code simple example: The basic logic to attach a program to a socket is as follows, // load the programs bpf_prog_load(SOCKMAP_TCP_MSG_PROG, BPF_PROG_TYPE_SK_MSG, &obj, &msg_prog); // lookup the sockmap bpf_map_msg = bpf_object__find_map_by_name(obj, "my_sock_map"); // get fd for sockmap map_fd_msg = bpf_map__fd(bpf_map_msg); // attach program to sockmap bpf_prog_attach(msg_prog, map_fd_msg, BPF_SK_MSG_VERDICT, 0); Adding sockets to the map is done in the normal way, // Add a socket 'fd' to sockmap at location 'i' bpf_map_update_elem(map_fd_msg, &i, fd, BPF_ANY); After the above any socket attached to "my_sock_map", in this case 'fd', will run the BPF msg verdict program (msg_prog) on every sendmsg and sendpage system call. For a complete example see BPF selftests or sockmap samples. Implementation notes: It seemed the simplest, to me at least, to use a refcnt to ensure psock is not lost across the sendmsg copy into the sg, the bpf program running on the data in sg_data, and the final pass to the TCP stack. Some performance testing may show a better method to do this and avoid the refcnt cost, but for now use the simpler method. Another item that will come after basic support is in place is supporting MSG_MORE flag. At the moment we call sendpages even if the MSG_MORE flag is set. An enhancement would be to collect the pages into a larger scatterlist and pass down the stack. Notice that bpf_tcp_sendmsg() could support this with some additional state saved across sendmsg calls. I built the code to support this without having to do refactoring work. Other features TBD include ZEROCOPY and the TCP_RECV_QUEUE/TCP_NO_QUEUE support. This will follow initial series shortly. Future work could improve size limits on the scatterlist rings used here. Currently, we use MAX_SKB_FRAGS simply because this was being used already in the TLS case. Future work could extend the kernel sk APIs to tune this depending on workload. This is a trade-off between memory usage and throughput performance. Signed-off-by: John Fastabend Acked-by: David S. Miller Acked-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 1e15d1724d89..ef529539abde 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -133,6 +133,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_SOCK_OPS, BPF_PROG_TYPE_SK_SKB, BPF_PROG_TYPE_CGROUP_DEVICE, + BPF_PROG_TYPE_SK_MSG, }; enum bpf_attach_type { @@ -143,6 +144,7 @@ enum bpf_attach_type { BPF_SK_SKB_STREAM_PARSER, BPF_SK_SKB_STREAM_VERDICT, BPF_CGROUP_DEVICE, + BPF_SK_MSG_VERDICT, __MAX_BPF_ATTACH_TYPE }; @@ -718,6 +720,15 @@ union bpf_attr { * int bpf_override_return(pt_regs, rc) * @pt_regs: pointer to struct pt_regs * @rc: the return value to set + * + * int bpf_msg_redirect_map(map, key, flags) + * Redirect msg to a sock in map using key as a lookup key for the + * sock in map. + * @map: pointer to sockmap + * @key: key to lookup sock in map + * @flags: reserved for future use + * Return: SK_PASS + * */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -779,7 +790,8 @@ union bpf_attr { FN(perf_prog_read_value), \ FN(getsockopt), \ FN(override_return), \ - FN(sock_ops_cb_flags_set), + FN(sock_ops_cb_flags_set), \ + FN(msg_redirect_map), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -942,6 +954,14 @@ enum sk_action { SK_PASS, }; +/* user accessible metadata for SK_MSG packet hook, new fields must + * be added to the end of this structure + */ +struct sk_msg_md { + void *data; + void *data_end; +}; + #define BPF_TAG_SIZE 8 struct bpf_prog_info { -- cgit v1.2.3 From 2a100317c9ebc204a166f16294884fbf9da074ce Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sun, 18 Mar 2018 12:57:15 -0700 Subject: bpf: sockmap, add bpf_msg_apply_bytes() helper A single sendmsg or sendfile system call can contain multiple logical messages that a BPF program may want to read and apply a verdict. But, without an apply_bytes helper any verdict on the data applies to all bytes in the sendmsg/sendfile. Alternatively, a BPF program may only care to read the first N bytes of a msg. If the payload is large say MB or even GB setting up and calling the BPF program repeatedly for all bytes, even though the verdict is already known, creates unnecessary overhead. To allow BPF programs to control how many bytes a given verdict applies to we implement a bpf_msg_apply_bytes() helper. When called from within a BPF program this sets a counter, internal to the BPF infrastructure, that applies the last verdict to the next N bytes. If the N is smaller than the current data being processed from a sendmsg/sendfile call, the first N bytes will be sent and the BPF program will be re-run with start_data pointing to the N+1 byte. If N is larger than the current data being processed the BPF verdict will be applied to multiple sendmsg/sendfile calls until N bytes are consumed. Note1 if a socket closes with apply_bytes counter non-zero this is not a problem because data is not being buffered for N bytes and is sent as its received. Signed-off-by: John Fastabend Acked-by: David S. Miller Acked-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index ef529539abde..a557a2a5d72d 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -791,7 +791,8 @@ union bpf_attr { FN(getsockopt), \ FN(override_return), \ FN(sock_ops_cb_flags_set), \ - FN(msg_redirect_map), + FN(msg_redirect_map), \ + FN(msg_apply_bytes), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call -- cgit v1.2.3 From 91843d540a139eb8070bcff8aa10089164436deb Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sun, 18 Mar 2018 12:57:20 -0700 Subject: bpf: sockmap, add msg_cork_bytes() helper In the case where we need a specific number of bytes before a verdict can be assigned, even if the data spans multiple sendmsg or sendfile calls. The BPF program may use msg_cork_bytes(). The extreme case is a user can call sendmsg repeatedly with 1-byte msg segments. Obviously, this is bad for performance but is still valid. If the BPF program needs N bytes to validate a header it can use msg_cork_bytes to specify N bytes and the BPF program will not be called again until N bytes have been accumulated. The infrastructure will attempt to coalesce data if possible so in many cases (most my use cases at least) the data will be in a single scatterlist element with data pointers pointing to start/end of the element. However, this is dependent on available memory so is not guaranteed. So BPF programs must validate data pointer ranges, but this is the case anyways to convince the verifier the accesses are valid. Signed-off-by: John Fastabend Acked-by: David S. Miller Acked-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index a557a2a5d72d..1765cfb16c99 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -792,7 +792,8 @@ union bpf_attr { FN(override_return), \ FN(sock_ops_cb_flags_set), \ FN(msg_redirect_map), \ - FN(msg_apply_bytes), + FN(msg_apply_bytes), \ + FN(msg_cork_bytes), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call -- cgit v1.2.3 From 015632bb30daaaee64e1bcac07570860e0bf3092 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sun, 18 Mar 2018 12:57:25 -0700 Subject: bpf: sk_msg program helper bpf_sk_msg_pull_data Currently, if a bpf sk msg program is run the program can only parse data that the (start,end) pointers already consumed. For sendmsg hooks this is likely the first scatterlist element. For sendpage this will be the range (0,0) because the data is shared with userspace and by default we want to avoid allowing userspace to modify data while (or after) BPF verdict is being decided. To support pulling in additional bytes for parsing use a new helper bpf_sk_msg_pull(start, end, flags) which works similar to cls tc logic. This helper will attempt to point the data start pointer at 'start' bytes offest into msg and data end pointer at 'end' bytes offset into message. After basic sanity checks to ensure 'start' <= 'end' and 'end' <= msg_length there are a few cases we need to handle. First the sendmsg hook has already copied the data from userspace and has exclusive access to it. Therefor, it is not necessesary to copy the data. However, it may be required. After finding the scatterlist element with 'start' offset byte in it there are two cases. One the range (start,end) is entirely contained in the sg element and is already linear. All that is needed is to update the data pointers, no allocate/copy is needed. The other case is (start, end) crosses sg element boundaries. In this case we allocate a block of size 'end - start' and copy the data to linearize it. Next sendpage hook has not copied any data in initial state so that data pointers are (0,0). In this case we handle it similar to the above sendmsg case except the allocation/copy must always happen. Then when sending the data we have possibly three memory regions that need to be sent, (0, start - 1), (start, end), and (end + 1, msg_length). This is required to ensure any writes by the BPF program are correctly transmitted. Lastly this operation will invalidate any previous data checks so BPF programs will have to revalidate pointers after making this BPF call. Signed-off-by: John Fastabend Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 1765cfb16c99..18b7c510c511 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -793,7 +793,8 @@ union bpf_attr { FN(sock_ops_cb_flags_set), \ FN(msg_redirect_map), \ FN(msg_apply_bytes), \ - FN(msg_cork_bytes), + FN(msg_cork_bytes), \ + FN(msg_pull_data), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call -- cgit v1.2.3 From 1f57bc12d87dda2d56b564d35f21b9e6bdb2bb2c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc-Andr=C3=A9=20Lureau?= Date: Wed, 28 Feb 2018 16:06:11 +0100 Subject: fw_cfg: add a public uapi header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Create a common header file for well-known values and structures to be shared by the Linux kernel with qemu or other projects. It is based from qemu/docs/specs/fw_cfg.txt which references qemu/include/hw/nvram/fw_cfg_keys.h "for the most up-to-date and authoritative list" & vmcoreinfo.txt. Those files don't have an explicit license, but qemu/hw/nvram/fw_cfg.c is BSD-license, so Michael S. Tsirkin suggested to use the same license. The patch intentionally left out DMA & vmcoreinfo structures & defines, which are added in the commits making usage of it. Suggested-by: Michael S. Tsirkin Signed-off-by: Marc-André Lureau Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/qemu_fw_cfg.h | 66 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 include/uapi/linux/qemu_fw_cfg.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/qemu_fw_cfg.h b/include/uapi/linux/qemu_fw_cfg.h new file mode 100644 index 000000000000..c698ac3812f6 --- /dev/null +++ b/include/uapi/linux/qemu_fw_cfg.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +#ifndef _LINUX_FW_CFG_H +#define _LINUX_FW_CFG_H + +#include + +#define FW_CFG_ACPI_DEVICE_ID "QEMU0002" + +/* selector key values for "well-known" fw_cfg entries */ +#define FW_CFG_SIGNATURE 0x00 +#define FW_CFG_ID 0x01 +#define FW_CFG_UUID 0x02 +#define FW_CFG_RAM_SIZE 0x03 +#define FW_CFG_NOGRAPHIC 0x04 +#define FW_CFG_NB_CPUS 0x05 +#define FW_CFG_MACHINE_ID 0x06 +#define FW_CFG_KERNEL_ADDR 0x07 +#define FW_CFG_KERNEL_SIZE 0x08 +#define FW_CFG_KERNEL_CMDLINE 0x09 +#define FW_CFG_INITRD_ADDR 0x0a +#define FW_CFG_INITRD_SIZE 0x0b +#define FW_CFG_BOOT_DEVICE 0x0c +#define FW_CFG_NUMA 0x0d +#define FW_CFG_BOOT_MENU 0x0e +#define FW_CFG_MAX_CPUS 0x0f +#define FW_CFG_KERNEL_ENTRY 0x10 +#define FW_CFG_KERNEL_DATA 0x11 +#define FW_CFG_INITRD_DATA 0x12 +#define FW_CFG_CMDLINE_ADDR 0x13 +#define FW_CFG_CMDLINE_SIZE 0x14 +#define FW_CFG_CMDLINE_DATA 0x15 +#define FW_CFG_SETUP_ADDR 0x16 +#define FW_CFG_SETUP_SIZE 0x17 +#define FW_CFG_SETUP_DATA 0x18 +#define FW_CFG_FILE_DIR 0x19 + +#define FW_CFG_FILE_FIRST 0x20 +#define FW_CFG_FILE_SLOTS_MIN 0x10 + +#define FW_CFG_WRITE_CHANNEL 0x4000 +#define FW_CFG_ARCH_LOCAL 0x8000 +#define FW_CFG_ENTRY_MASK (~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL)) + +#define FW_CFG_INVALID 0xffff + +/* width in bytes of fw_cfg control register */ +#define FW_CFG_CTL_SIZE 0x02 + +/* fw_cfg "file name" is up to 56 characters (including terminating nul) */ +#define FW_CFG_MAX_FILE_PATH 56 + +/* size in bytes of fw_cfg signature */ +#define FW_CFG_SIG_SIZE 4 + +/* FW_CFG_ID bits */ +#define FW_CFG_VERSION 0x01 + +/* fw_cfg file directory entry type */ +struct fw_cfg_file { + __be32 size; + __be16 select; + __u16 reserved; + char name[FW_CFG_MAX_FILE_PATH]; +}; + +#endif -- cgit v1.2.3 From 2d6d60a3d3eca50bbb20052278cb11dabcf4dff3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc-Andr=C3=A9=20Lureau?= Date: Wed, 28 Feb 2018 16:06:14 +0100 Subject: fw_cfg: write vmcoreinfo details MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the "etc/vmcoreinfo" fw_cfg file is present and we are not running the kdump kernel, write the addr/size of the vmcoreinfo ELF note. The DMA operation is expected to run synchronously with today qemu, but the specification states that it may become async, so we run "control" field check in a loop for eventual changes. Signed-off-by: Marc-André Lureau Signed-off-by: Michael S. Tsirkin --- include/uapi/linux/qemu_fw_cfg.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/qemu_fw_cfg.h b/include/uapi/linux/qemu_fw_cfg.h index c698ac3812f6..e089c0159ec2 100644 --- a/include/uapi/linux/qemu_fw_cfg.h +++ b/include/uapi/linux/qemu_fw_cfg.h @@ -54,6 +54,7 @@ /* FW_CFG_ID bits */ #define FW_CFG_VERSION 0x01 +#define FW_CFG_VERSION_DMA 0x02 /* fw_cfg file directory entry type */ struct fw_cfg_file { @@ -63,4 +64,34 @@ struct fw_cfg_file { char name[FW_CFG_MAX_FILE_PATH]; }; +/* FW_CFG_DMA_CONTROL bits */ +#define FW_CFG_DMA_CTL_ERROR 0x01 +#define FW_CFG_DMA_CTL_READ 0x02 +#define FW_CFG_DMA_CTL_SKIP 0x04 +#define FW_CFG_DMA_CTL_SELECT 0x08 +#define FW_CFG_DMA_CTL_WRITE 0x10 + +#define FW_CFG_DMA_SIGNATURE 0x51454d5520434647ULL /* "QEMU CFG" */ + +/* Control as first field allows for different structures selected by this + * field, which might be useful in the future + */ +struct fw_cfg_dma_access { + __be32 control; + __be32 length; + __be64 address; +}; + +#define FW_CFG_VMCOREINFO_FILENAME "etc/vmcoreinfo" + +#define FW_CFG_VMCOREINFO_FORMAT_NONE 0x0 +#define FW_CFG_VMCOREINFO_FORMAT_ELF 0x1 + +struct fw_cfg_vmcoreinfo { + __le16 host_format; + __le16 guest_format; + __le32 size; + __le64 paddr; +}; + #endif -- cgit v1.2.3 From d719e3f21cf91d3f82bd827d46199ba41af2f73a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 9 Mar 2018 11:57:20 +0100 Subject: netfilter: nft_ct: add NFT_CT_{SRC,DST}_{IP,IP6} All existing keys, except the NFT_CT_SRC and NFT_CT_DST are assumed to have strict datatypes. This is causing problems with sets and concatenations given the specific length of these keys is not known. Signed-off-by: Pablo Neira Ayuso Acked-by: Florian Westphal --- include/uapi/linux/netfilter/nf_tables.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 66dceee0ae30..6a3d653d5b27 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -909,8 +909,8 @@ enum nft_rt_attributes { * @NFT_CT_EXPIRATION: relative conntrack expiration time in ms * @NFT_CT_HELPER: connection tracking helper assigned to conntrack * @NFT_CT_L3PROTOCOL: conntrack layer 3 protocol - * @NFT_CT_SRC: conntrack layer 3 protocol source (IPv4/IPv6 address) - * @NFT_CT_DST: conntrack layer 3 protocol destination (IPv4/IPv6 address) + * @NFT_CT_SRC: conntrack layer 3 protocol source (IPv4/IPv6 address, deprecated) + * @NFT_CT_DST: conntrack layer 3 protocol destination (IPv4/IPv6 address, deprecated) * @NFT_CT_PROTOCOL: conntrack layer 4 protocol * @NFT_CT_PROTO_SRC: conntrack layer 4 protocol source * @NFT_CT_PROTO_DST: conntrack layer 4 protocol destination @@ -920,6 +920,10 @@ enum nft_rt_attributes { * @NFT_CT_AVGPKT: conntrack average bytes per packet * @NFT_CT_ZONE: conntrack zone * @NFT_CT_EVENTMASK: ctnetlink events to be generated for this conntrack + * @NFT_CT_SRC_IP: conntrack layer 3 protocol source (IPv4 address) + * @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address) + * @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address) + * @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address) */ enum nft_ct_keys { NFT_CT_STATE, @@ -941,6 +945,10 @@ enum nft_ct_keys { NFT_CT_AVGPKT, NFT_CT_ZONE, NFT_CT_EVENTMASK, + NFT_CT_SRC_IP, + NFT_CT_DST_IP, + NFT_CT_SRC_IP6, + NFT_CT_DST_IP6, }; /** -- cgit v1.2.3 From 472a73e00757b971d613d796374d2727b2e4954d Mon Sep 17 00:00:00 2001 From: Jack Ma Date: Mon, 19 Mar 2018 09:41:59 +1300 Subject: netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets. This patch introduces a new feature that allows bitshifting (left and right) operations to co-operate with existing iptables options. Reviewed-by: Florian Westphal Signed-off-by: Jack Ma Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/xt_connmark.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/xt_connmark.h b/include/uapi/linux/netfilter/xt_connmark.h index 408a9654f05c..1aa5c955ee1e 100644 --- a/include/uapi/linux/netfilter/xt_connmark.h +++ b/include/uapi/linux/netfilter/xt_connmark.h @@ -19,11 +19,21 @@ enum { XT_CONNMARK_RESTORE }; +enum { + D_SHIFT_LEFT = 0, + D_SHIFT_RIGHT, +}; + struct xt_connmark_tginfo1 { __u32 ctmark, ctmask, nfmask; __u8 mode; }; +struct xt_connmark_tginfo2 { + __u32 ctmark, ctmask, nfmask; + __u8 shift_dir, shift_bits, mode; +}; + struct xt_connmark_mtinfo1 { __u32 mark, mask; __u8 invert; -- cgit v1.2.3 From 20710b3b81895c89e92bcc32ce85c0bede1171f8 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 20 Mar 2018 12:33:51 +0100 Subject: netfilter: ctnetlink: synproxy support This patch exposes synproxy information per-conntrack. Moreover, send sequence adjustment events once server sends us the SYN,ACK packet, so we can synchronize the sequence adjustment too for packets going as reply from the server, as part of the synproxy logic. Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/nf_conntrack_common.h | 1 + include/uapi/linux/netfilter/nfnetlink_conntrack.h | 10 ++++++++++ 2 files changed, 11 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h index 9574bd40870b..c712eb6879f1 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_common.h +++ b/include/uapi/linux/netfilter/nf_conntrack_common.h @@ -129,6 +129,7 @@ enum ip_conntrack_events { IPCT_NATSEQADJ = IPCT_SEQADJ, IPCT_SECMARK, /* new security mark has been set */ IPCT_LABEL, /* new connlabel has been set */ + IPCT_SYNPROXY, /* synproxy has been set */ #ifdef __KERNEL__ __IPCT_MAX #endif diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 7397e022ce6e..77987111cab0 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -54,6 +54,7 @@ enum ctattr_type { CTA_MARK_MASK, CTA_LABELS, CTA_LABELS_MASK, + CTA_SYNPROXY, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) @@ -190,6 +191,15 @@ enum ctattr_natseq { }; #define CTA_NAT_SEQ_MAX (__CTA_NAT_SEQ_MAX - 1) +enum ctattr_synproxy { + CTA_SYNPROXY_UNSPEC, + CTA_SYNPROXY_ISN, + CTA_SYNPROXY_ITS, + CTA_SYNPROXY_TSOFF, + __CTA_SYNPROXY_MAX, +}; +#define CTA_SYNPROXY_MAX (__CTA_SYNPROXY_MAX - 1) + enum ctattr_expect { CTA_EXPECT_UNSPEC, CTA_EXPECT_MASTER, -- cgit v1.2.3 From 5adc1668ddc42bb44fd6d006cacad74ed0cbf49d Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Sun, 4 Mar 2018 09:28:53 +0100 Subject: netfilter: ebtables: add support for matching ICMP type and code We already have ICMPv6 type/code matches. This adds support for IPv4 ICMP matches in the same way. Signed-off-by: Matthias Schiffer Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter_bridge/ebt_ip.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter_bridge/ebt_ip.h b/include/uapi/linux/netfilter_bridge/ebt_ip.h index 8e462fb1983f..4ed7fbb0a482 100644 --- a/include/uapi/linux/netfilter_bridge/ebt_ip.h +++ b/include/uapi/linux/netfilter_bridge/ebt_ip.h @@ -24,8 +24,9 @@ #define EBT_IP_PROTO 0x08 #define EBT_IP_SPORT 0x10 #define EBT_IP_DPORT 0x20 +#define EBT_IP_ICMP 0x40 #define EBT_IP_MASK (EBT_IP_SOURCE | EBT_IP_DEST | EBT_IP_TOS | EBT_IP_PROTO |\ - EBT_IP_SPORT | EBT_IP_DPORT ) + EBT_IP_SPORT | EBT_IP_DPORT | EBT_IP_ICMP) #define EBT_IP_MATCH "ip" /* the same values are used for the invflags */ @@ -38,8 +39,14 @@ struct ebt_ip_info { __u8 protocol; __u8 bitmask; __u8 invflags; - __u16 sport[2]; - __u16 dport[2]; + union { + __u16 sport[2]; + __u8 icmp_type[2]; + }; + union { + __u16 dport[2]; + __u8 icmp_code[2]; + }; }; #endif -- cgit v1.2.3 From 78d9f4d49bbecd101b4e5faf19f8f70719fee2ca Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Sun, 4 Mar 2018 09:28:54 +0100 Subject: netfilter: ebtables: add support for matching IGMP type We already have ICMPv6 type/code matches (which can be used to distinguish different types of MLD packets). Add support for IPv4 IGMP matches in the same way. Signed-off-by: Matthias Schiffer Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter_bridge/ebt_ip.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter_bridge/ebt_ip.h b/include/uapi/linux/netfilter_bridge/ebt_ip.h index 4ed7fbb0a482..46d6261370b0 100644 --- a/include/uapi/linux/netfilter_bridge/ebt_ip.h +++ b/include/uapi/linux/netfilter_bridge/ebt_ip.h @@ -25,8 +25,9 @@ #define EBT_IP_SPORT 0x10 #define EBT_IP_DPORT 0x20 #define EBT_IP_ICMP 0x40 +#define EBT_IP_IGMP 0x80 #define EBT_IP_MASK (EBT_IP_SOURCE | EBT_IP_DEST | EBT_IP_TOS | EBT_IP_PROTO |\ - EBT_IP_SPORT | EBT_IP_DPORT | EBT_IP_ICMP) + EBT_IP_SPORT | EBT_IP_DPORT | EBT_IP_ICMP | EBT_IP_IGMP) #define EBT_IP_MATCH "ip" /* the same values are used for the invflags */ @@ -42,6 +43,7 @@ struct ebt_ip_info { union { __u16 sport[2]; __u8 icmp_type[2]; + __u8 igmp_type[2]; }; union { __u16 dport[2]; -- cgit v1.2.3 From 2cb021f5de55b1d158fa18b0215a4613c3289a82 Mon Sep 17 00:00:00 2001 From: Dmitry Lebed Date: Thu, 1 Mar 2018 12:39:16 +0300 Subject: cfg80211/nl80211: add CAC_STARTED event CAC_STARTED event is needed for DFS offload feature and should be generated by driver/HW if DFS_OFFLOAD is enabled. Signed-off-by: Dmitry Lebed Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c13c84304be3..b8e989073cbb 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5204,6 +5204,8 @@ enum nl80211_smps_mode { * non-operating channel is expired and no longer valid. New CAC must * be done on this channel before starting the operation. This is not * applicable for ETSI dfs domain where pre-CAC is valid for ever. + * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, + * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. */ enum nl80211_radar_event { NL80211_RADAR_DETECTED, @@ -5211,6 +5213,7 @@ enum nl80211_radar_event { NL80211_RADAR_CAC_ABORTED, NL80211_RADAR_NOP_FINISHED, NL80211_RADAR_PRE_CAC_EXPIRED, + NL80211_RADAR_CAC_STARTED, }; /** -- cgit v1.2.3 From 13cf6dec93e021ebd297619ea1926aea31b6430b Mon Sep 17 00:00:00 2001 From: Dmitry Lebed Date: Thu, 1 Mar 2018 12:39:15 +0300 Subject: cfg80211/nl80211: add DFS offload flag Add wiphy EXT_FEATURE flag to indicate that HW or driver does all DFS actions by itself. User-space functionality already implemented in hostapd using vendor-specific (QCA) OUI to advertise DFS offload support. Need to introduce generic flag to inform about DFS offload support. For devices with DFS_OFFLOAD flag set user-space will no longer need to issue CAC or do any actions in response to "radar detected" events. HW will do everything by itself and send events to user-space to indicate that CAC was started/finished, etc. Signed-off-by: Dmitrii Lebed Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index b8e989073cbb..60fefc5a2ea4 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4999,6 +4999,12 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. + * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. + * Device or driver will do all DFS-related actions by itself, + * informing user-space about CAC progress, radar detection event, + * channel change triggered by radar detection event. + * No need to start CAC from user-space, no need to react to + * "radar detected" event. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -5029,6 +5035,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_LOW_SPAN_SCAN, NL80211_EXT_FEATURE_LOW_POWER_SCAN, NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, + NL80211_EXT_FEATURE_DFS_OFFLOAD, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3 From 9a2fe9b801f585baccf8352d82839dcd54b300cf Mon Sep 17 00:00:00 2001 From: Ruslan Bilovol Date: Wed, 21 Mar 2018 02:03:59 +0200 Subject: ALSA: usb: initial USB Audio Device Class 3.0 support Recently released USB Audio Class 3.0 specification introduces many significant changes comparing to previous versions, like - new Power Domains, support for LPM/L1 - new Cluster descriptor - changed layout of all class-specific descriptors - new High Capability descriptors - New class-specific String descriptors - new and removed units - additional sources for interrupts - removed Type II Audio Data Formats - ... and many other things (check spec) It also provides backward compatibility through multiple configurations, as well as requires mandatory support for BADD (Basic Audio Device Definition) on each ADC3.0 compliant device This patch adds initial support of UAC3 specification that is enough for Generic I/O Profile (BAOF, BAIF) device support from BADD document. Signed-off-by: Ruslan Bilovol Reviewed-by: Greg Kroah-Hartman Signed-off-by: Takashi Iwai --- include/uapi/linux/usb/audio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h index da3315ed1bcd..3a78e7145689 100644 --- a/include/uapi/linux/usb/audio.h +++ b/include/uapi/linux/usb/audio.h @@ -27,6 +27,7 @@ /* bInterfaceProtocol values to denote the version of the standard used */ #define UAC_VERSION_1 0x00 #define UAC_VERSION_2 0x20 +#define UAC_VERSION_3 0x30 /* A.2 Audio Interface Subclass Codes */ #define USB_SUBCLASS_AUDIOCONTROL 0x01 -- cgit v1.2.3 From 447dcc0cf12922fcda67731559dd970bde7b35a6 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sun, 3 Dec 2017 11:06:54 -0500 Subject: media: rc: add new imon protocol decoder and encoder This makes it possible to use the various iMON remotes with any raw IR RC device. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/lirc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h index 4fe580d36e41..948d9a491083 100644 --- a/include/uapi/linux/lirc.h +++ b/include/uapi/linux/lirc.h @@ -186,6 +186,7 @@ struct lirc_scancode { * @RC_PROTO_SHARP: Sharp protocol * @RC_PROTO_XMP: XMP protocol * @RC_PROTO_CEC: CEC protocol + * @RC_PROTO_IMON: iMon Pad protocol */ enum rc_proto { RC_PROTO_UNKNOWN = 0, @@ -211,6 +212,7 @@ enum rc_proto { RC_PROTO_SHARP = 20, RC_PROTO_XMP = 21, RC_PROTO_CEC = 22, + RC_PROTO_IMON = 23, }; #endif -- cgit v1.2.3 From 1acfb9b7ee0b1881bb8e875b6757976e48293ec4 Mon Sep 17 00:00:00 2001 From: Jay Fang Date: Mon, 12 Mar 2018 17:13:32 +0800 Subject: PCI: Add decoding for 16 GT/s link speed PCIe 4.0 defines the 16.0 GT/s link speed. Links can run at that speed without any Linux changes, but previously their sysfs "max_link_speed" and "current_link_speed" files contained "Unknown speed", not the expected "16.0 GT/s". Add decoding for the new 16 GT/s link speed. Signed-off-by: Jay Fang [bhelgaas: add PCI_EXP_LNKCAP2_SLS_16_0GB] Signed-off-by: Bjorn Helgaas Reviewed-by: Dongdong Liu --- include/uapi/linux/pci_regs.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 0c79eac5e9b8..103ba797a8f3 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -520,6 +520,7 @@ #define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ #define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ #define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */ +#define PCI_EXP_LNKCAP_SLS_16_0GB 0x00000004 /* LNKCAP2 SLS Vector bit 3 */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ @@ -547,6 +548,7 @@ #define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */ #define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ #define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_16_0GB 0x0004 /* Current Link Speed 16.0GT/s */ #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */ #define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */ #define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */ @@ -648,8 +650,9 @@ #define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */ #define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ #define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */ +#define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ -- cgit v1.2.3 From 53b2534551f179dcd065b4ead79fa1327678a0e0 Mon Sep 17 00:00:00 2001 From: Smitha T Murthy Date: Fri, 2 Feb 2018 07:25:41 -0500 Subject: media: videodev2.h: Add v4l2 definition for HEVC Add V4L2 definition for HEVC compressed format Signed-off-by: Smitha T Murthy Reviewed-by: Andrzej Hajda Reviewed-by: Stanimir Varbanov Acked-by: Hans Verkuil Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 982718965180..600877be5c22 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -635,6 +635,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ +#define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ -- cgit v1.2.3 From 2c02837bd99cda8e4f8b9cb5ea74956242b5c851 Mon Sep 17 00:00:00 2001 From: Smitha T Murthy Date: Fri, 2 Feb 2018 07:25:46 -0500 Subject: media: v4l2: Add v4l2 control IDs for HEVC encoder Add v4l2 controls for HEVC encoder Signed-off-by: Smitha T Murthy Reviewed-by: Andrzej Hajda Acked-by: Hans Verkuil Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-controls.h | 93 +++++++++++++++++++++++++++++++++++++- 1 file changed, 92 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index cbbb750d87d1..8d473c979b61 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -589,6 +589,98 @@ enum v4l2_vp8_golden_frame_sel { #define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511) +/* CIDs for HEVC encoding. */ + +#define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_MPEG_BASE + 600) +#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (V4L2_CID_MPEG_BASE + 601) +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (V4L2_CID_MPEG_BASE + 602) +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (V4L2_CID_MPEG_BASE + 603) +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (V4L2_CID_MPEG_BASE + 604) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (V4L2_CID_MPEG_BASE + 605) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE (V4L2_CID_MPEG_BASE + 606) +enum v4l2_mpeg_video_hevc_hier_coding_type { + V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B = 0, + V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P = 1, +}; +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (V4L2_CID_MPEG_BASE + 607) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (V4L2_CID_MPEG_BASE + 608) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (V4L2_CID_MPEG_BASE + 609) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (V4L2_CID_MPEG_BASE + 610) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (V4L2_CID_MPEG_BASE + 611) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (V4L2_CID_MPEG_BASE + 612) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (V4L2_CID_MPEG_BASE + 613) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (V4L2_CID_MPEG_BASE + 614) +#define V4L2_CID_MPEG_VIDEO_HEVC_PROFILE (V4L2_CID_MPEG_BASE + 615) +enum v4l2_mpeg_video_hevc_profile { + V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN = 0, + V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE = 1, + V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10 = 2, +}; +#define V4L2_CID_MPEG_VIDEO_HEVC_LEVEL (V4L2_CID_MPEG_BASE + 616) +enum v4l2_mpeg_video_hevc_level { + V4L2_MPEG_VIDEO_HEVC_LEVEL_1 = 0, + V4L2_MPEG_VIDEO_HEVC_LEVEL_2 = 1, + V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1 = 2, + V4L2_MPEG_VIDEO_HEVC_LEVEL_3 = 3, + V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1 = 4, + V4L2_MPEG_VIDEO_HEVC_LEVEL_4 = 5, + V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1 = 6, + V4L2_MPEG_VIDEO_HEVC_LEVEL_5 = 7, + V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1 = 8, + V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2 = 9, + V4L2_MPEG_VIDEO_HEVC_LEVEL_6 = 10, + V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1 = 11, + V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2 = 12, +}; +#define V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (V4L2_CID_MPEG_BASE + 617) +#define V4L2_CID_MPEG_VIDEO_HEVC_TIER (V4L2_CID_MPEG_BASE + 618) +enum v4l2_mpeg_video_hevc_tier { + V4L2_MPEG_VIDEO_HEVC_TIER_MAIN = 0, + V4L2_MPEG_VIDEO_HEVC_TIER_HIGH = 1, +}; +#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (V4L2_CID_MPEG_BASE + 619) +#define V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE (V4L2_CID_MPEG_BASE + 620) +enum v4l2_cid_mpeg_video_hevc_loop_filter_mode { + V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED = 0, + V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED = 1, + V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY = 2, +}; +#define V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (V4L2_CID_MPEG_BASE + 621) +#define V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (V4L2_CID_MPEG_BASE + 622) +#define V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE (V4L2_CID_MPEG_BASE + 623) +enum v4l2_cid_mpeg_video_hevc_refresh_type { + V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE = 0, + V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA = 1, + V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR = 2, +}; +#define V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (V4L2_CID_MPEG_BASE + 624) +#define V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (V4L2_CID_MPEG_BASE + 625) +#define V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (V4L2_CID_MPEG_BASE + 626) +#define V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (V4L2_CID_MPEG_BASE + 627) +#define V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (V4L2_CID_MPEG_BASE + 628) +#define V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (V4L2_CID_MPEG_BASE + 629) +#define V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (V4L2_CID_MPEG_BASE + 630) +#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (V4L2_CID_MPEG_BASE + 631) +#define V4L2_CID_MPEG_VIDEO_HEVC_INTRA_PU_SPLIT (V4L2_CID_MPEG_BASE + 632) +#define V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (V4L2_CID_MPEG_BASE + 633) +#define V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (V4L2_CID_MPEG_BASE + 634) +#define V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD (V4L2_CID_MPEG_BASE + 635) +enum v4l2_cid_mpeg_video_hevc_size_of_length_field { + V4L2_MPEG_VIDEO_HEVC_SIZE_0 = 0, + V4L2_MPEG_VIDEO_HEVC_SIZE_1 = 1, + V4L2_MPEG_VIDEO_HEVC_SIZE_2 = 2, + V4L2_MPEG_VIDEO_HEVC_SIZE_4 = 3, +}; +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (V4L2_CID_MPEG_BASE + 636) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (V4L2_CID_MPEG_BASE + 637) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (V4L2_CID_MPEG_BASE + 638) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (V4L2_CID_MPEG_BASE + 639) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (V4L2_CID_MPEG_BASE + 640) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (V4L2_CID_MPEG_BASE + 641) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (V4L2_CID_MPEG_BASE + 642) +#define V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (V4L2_CID_MPEG_BASE + 643) +#define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_MPEG_BASE + 644) + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0) @@ -657,7 +749,6 @@ enum v4l2_mpeg_mfc51_video_force_frame_type { #define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (V4L2_CID_MPEG_MFC51_BASE+53) #define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (V4L2_CID_MPEG_MFC51_BASE+54) - /* Camera class control IDs */ #define V4L2_CID_CAMERA_CLASS_BASE (V4L2_CTRL_CLASS_CAMERA | 0x900) -- cgit v1.2.3 From c30b70deb5f4861f590031c33fd3ec6cc63f1df1 Mon Sep 17 00:00:00 2001 From: GhantaKrishnamurthy MohanKrishna Date: Wed, 21 Mar 2018 14:37:44 +0100 Subject: tipc: implement socket diagnostics for AF_TIPC This commit adds socket diagnostics capability for AF_TIPC in netlink family NETLINK_SOCK_DIAG in a new kernel module (diag.ko). The following are key design considerations: - config TIPC_DIAG has default y, like INET_DIAG. - only requests with flag NLM_F_DUMP is supported (dump all). - tipc_sock_diag_req message is introduced to send filter parameters. - the response attributes are of TLV, some nested. To avoid exposing data structures between diag and tipc modules and avoid code duplication, the following additions are required: - export tipc_nl_sk_walk function to reuse socket iterator. - export tipc_sk_fill_sock_diag to fill the tipc diag attributes. - create a sock_diag response message in __tipc_add_sock_diag defined in diag.c and use the above exported tipc_sk_fill_sock_diag to fill response. Acked-by: Jon Maloy Acked-by: Ying Xue Signed-off-by: GhantaKrishnamurthy MohanKrishna Signed-off-by: Parthasarathy Bhuvaragan Signed-off-by: David S. Miller --- include/uapi/linux/tipc_netlink.h | 18 ++++++++++++++++++ include/uapi/linux/tipc_sockets_diag.h | 17 +++++++++++++++++ 2 files changed, 35 insertions(+) create mode 100644 include/uapi/linux/tipc_sockets_diag.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h index 469aa67a5ecb..d7cec0480d70 100644 --- a/include/uapi/linux/tipc_netlink.h +++ b/include/uapi/linux/tipc_netlink.h @@ -114,6 +114,13 @@ enum { TIPC_NLA_SOCK_REF, /* u32 */ TIPC_NLA_SOCK_CON, /* nest */ TIPC_NLA_SOCK_HAS_PUBL, /* flag */ + TIPC_NLA_SOCK_STAT, /* nest */ + TIPC_NLA_SOCK_TYPE, /* u32 */ + TIPC_NLA_SOCK_INO, /* u32 */ + TIPC_NLA_SOCK_UID, /* u32 */ + TIPC_NLA_SOCK_TIPC_STATE, /* u32 */ + TIPC_NLA_SOCK_COOKIE, /* u64 */ + TIPC_NLA_SOCK_PAD, /* flag */ __TIPC_NLA_SOCK_MAX, TIPC_NLA_SOCK_MAX = __TIPC_NLA_SOCK_MAX - 1 @@ -238,6 +245,17 @@ enum { TIPC_NLA_CON_MAX = __TIPC_NLA_CON_MAX - 1 }; +/* Nest, socket statistics info */ +enum { + TIPC_NLA_SOCK_STAT_RCVQ, /* u32 */ + TIPC_NLA_SOCK_STAT_SENDQ, /* u32 */ + TIPC_NLA_SOCK_STAT_LINK_CONG, /* flag */ + TIPC_NLA_SOCK_STAT_CONN_CONG, /* flag */ + + __TIPC_NLA_SOCK_STAT_MAX, + TIPC_NLA_SOCK_STAT_MAX = __TIPC_NLA_SOCK_STAT_MAX - 1 +}; + /* Nest, link propreties. Valid for link, media and bearer */ enum { TIPC_NLA_PROP_UNSPEC, diff --git a/include/uapi/linux/tipc_sockets_diag.h b/include/uapi/linux/tipc_sockets_diag.h new file mode 100644 index 000000000000..7678cf2f0dcc --- /dev/null +++ b/include/uapi/linux/tipc_sockets_diag.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* AF_TIPC sock_diag interface for querying open sockets */ + +#ifndef _UAPI__TIPC_SOCKETS_DIAG_H__ +#define _UAPI__TIPC_SOCKETS_DIAG_H__ + +#include +#include + +/* Request */ +struct tipc_sock_diag_req { + __u8 sdiag_family; /* must be AF_TIPC */ + __u8 sdiag_protocol; /* must be 0 */ + __u16 pad; /* must be 0 */ + __u32 tidiag_states; /* query*/ +}; +#endif /* _UAPI__TIPC_SOCKETS_DIAG_H__ */ -- cgit v1.2.3 From 872619d8cf810c17279335ef531a2a34f3b4e589 Mon Sep 17 00:00:00 2001 From: GhantaKrishnamurthy MohanKrishna Date: Wed, 21 Mar 2018 14:37:45 +0100 Subject: tipc: step sk->sk_drops when rcv buffer is full Currently when tipc is unable to queue a received message on a socket, the message is rejected back to the sender with error TIPC_ERR_OVERLOAD. However, the application on this socket has no knowledge about these discards. In this commit, we try to step the sk_drops counter when tipc is unable to queue a received message. Export sk_drops using tipc socket diagnostics. Acked-by: Jon Maloy Acked-by: Ying Xue Signed-off-by: GhantaKrishnamurthy MohanKrishna Signed-off-by: Parthasarathy Bhuvaragan Signed-off-by: David S. Miller --- include/uapi/linux/tipc_netlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h index d7cec0480d70..d896ded51bcb 100644 --- a/include/uapi/linux/tipc_netlink.h +++ b/include/uapi/linux/tipc_netlink.h @@ -251,6 +251,7 @@ enum { TIPC_NLA_SOCK_STAT_SENDQ, /* u32 */ TIPC_NLA_SOCK_STAT_LINK_CONG, /* flag */ TIPC_NLA_SOCK_STAT_CONN_CONG, /* flag */ + TIPC_NLA_SOCK_STAT_DROP, /* u32 */ __TIPC_NLA_SOCK_STAT_MAX, TIPC_NLA_SOCK_STAT_MAX = __TIPC_NLA_SOCK_STAT_MAX - 1 -- cgit v1.2.3 From 14452ca3b5ce304fb2fea96dbc9ca1e4e7978551 Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Wed, 21 Mar 2018 19:48:14 -0600 Subject: net: qualcomm: rmnet: Export mux_id and flags to netlink Define new netlink attributes for rmnet mux_id and flags. These flags / mux_id were earlier using vlan flags / id respectively. The flag bits are also moved to uapi and are renamed with prefix RMNET_FLAG_*. Also add the rmnet policy to handle the new netlink attributes. Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller --- include/uapi/linux/if_link.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 11d0c0ea2bfa..68699f654118 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -959,4 +959,25 @@ enum { #define IFLA_TUN_MAX (__IFLA_TUN_MAX - 1) +/* rmnet section */ + +#define RMNET_FLAGS_INGRESS_DEAGGREGATION (1U << 0) +#define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3) + +enum { + IFLA_RMNET_UNSPEC, + IFLA_RMNET_MUX_ID, + IFLA_RMNET_FLAGS, + __IFLA_RMNET_MAX, +}; + +#define IFLA_RMNET_MAX (__IFLA_RMNET_MAX - 1) + +struct ifla_rmnet_flags { + __u32 flags; + __u32 mask; +}; + #endif /* _UAPI_LINUX_IF_LINK_H */ -- cgit v1.2.3 From c46234ebb4d1eee5e09819f49169e51cfc6eb909 Mon Sep 17 00:00:00 2001 From: Dave Watson Date: Thu, 22 Mar 2018 10:10:35 -0700 Subject: tls: RX path for ktls Add rx path for tls software implementation. recvmsg, splice_read, and poll implemented. An additional sockopt TLS_RX is added, with the same interface as TLS_TX. Either TLX_RX or TLX_TX may be provided separately, or together (with two different setsockopt calls with appropriate keys). Control messages are passed via CMSG in a similar way to transmit. If no cmsg buffer is passed, then only application data records will be passed to userspace, and EIO is returned for other types of alerts. EBADMSG is passed for decryption errors, and EMSGSIZE is passed for framing too big, and EBADMSG for framing too small (matching openssl semantics). EINVAL is returned for TLS versions that do not match the original setsockopt call. All are unrecoverable. strparser is used to parse TLS framing. Decryption is done directly in to userspace buffers if they are large enough to support it, otherwise sk_cow_data is called (similar to ipsec), and buffers are decrypted in place and copied. splice_read always decrypts in place, since no buffers are provided to decrypt in to. sk_poll is overridden, and only returns POLLIN if a full TLS message is received. Otherwise we wait for strparser to finish reading a full frame. Actual decryption is only done during recvmsg or splice_read calls. Signed-off-by: Dave Watson Signed-off-by: David S. Miller --- include/uapi/linux/tls.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index 293b2cdad88d..c6633e97eca4 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -38,6 +38,7 @@ /* TLS socket options */ #define TLS_TX 1 /* Set transmit parameters */ +#define TLS_RX 2 /* Set receive parameters */ /* Supported versions */ #define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) @@ -59,6 +60,7 @@ #define TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE 8 #define TLS_SET_RECORD_TYPE 1 +#define TLS_GET_RECORD_TYPE 2 struct tls_crypto_info { __u16 version; -- cgit v1.2.3 From d50ccc2d3909fc1b4d40e4af16b026f05dc68707 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Thu, 22 Mar 2018 20:42:50 +0100 Subject: tipc: add 128-bit node identifier We add a 128-bit node identity, as an alternative to the currently used 32-bit node address. For the sake of compatibility and to minimize message header changes we retain the existing 32-bit address field. When not set explicitly by the user, this field will be filled with a hash value generated from the much longer node identity, and be used as a shorthand value for the latter. We permit either the address or the identity to be set by configuration, but not both, so when the address value is set by a legacy user the corresponding 128-bit node identity is generated based on the that value. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- include/uapi/linux/tipc_netlink.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h index d896ded51bcb..0affb682e5e3 100644 --- a/include/uapi/linux/tipc_netlink.h +++ b/include/uapi/linux/tipc_netlink.h @@ -169,6 +169,8 @@ enum { TIPC_NLA_NET_UNSPEC, TIPC_NLA_NET_ID, /* u32 */ TIPC_NLA_NET_ADDR, /* u32 */ + TIPC_NLA_NET_NODEID, /* u64 */ + TIPC_NLA_NET_NODEID_W1, /* u64 */ __TIPC_NLA_NET_MAX, TIPC_NLA_NET_MAX = __TIPC_NLA_NET_MAX - 1 -- cgit v1.2.3 From 30656177c4080460b936709ff6648f201d7d2c1a Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 21 Mar 2018 12:46:21 -0600 Subject: vfio/pci: Add ioeventfd support The ioeventfd here is actually irqfd handling of an ioeventfd such as supported in KVM. A user is able to pre-program a device write to occur when the eventfd triggers. This is yet another instance of eventfd-irqfd triggering between KVM and vfio. The impetus for this is high frequency writes to pages which are virtualized in QEMU. Enabling this near-direct write path for selected registers within the virtualized page can improve performance and reduce overhead. Specifically this is initially targeted at NVIDIA graphics cards where the driver issues a write to an MMIO register within a virtualized region in order to allow the MSI interrupt to re-trigger. Reviewed-by: Peter Xu Reviewed-by: Alexey Kardashevskiy Signed-off-by: Alex Williamson --- include/uapi/linux/vfio.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index c74372163ed2..1aa7b82e8169 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -575,6 +575,33 @@ struct vfio_device_gfx_plane_info { #define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15) +/** + * VFIO_DEVICE_IOEVENTFD - _IOW(VFIO_TYPE, VFIO_BASE + 16, + * struct vfio_device_ioeventfd) + * + * Perform a write to the device at the specified device fd offset, with + * the specified data and width when the provided eventfd is triggered. + * vfio bus drivers may not support this for all regions, for all widths, + * or at all. vfio-pci currently only enables support for BAR regions, + * excluding the MSI-X vector table. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_ioeventfd { + __u32 argsz; + __u32 flags; +#define VFIO_DEVICE_IOEVENTFD_8 (1 << 0) /* 1-byte write */ +#define VFIO_DEVICE_IOEVENTFD_16 (1 << 1) /* 2-byte write */ +#define VFIO_DEVICE_IOEVENTFD_32 (1 << 2) /* 4-byte write */ +#define VFIO_DEVICE_IOEVENTFD_64 (1 << 3) /* 8-byte write */ +#define VFIO_DEVICE_IOEVENTFD_SIZE_MASK (0xf) + __u64 offset; /* device fd offset of write */ + __u64 data; /* data to be written */ + __s32 fd; /* -1 for de-assignment */ +}; + +#define VFIO_DEVICE_IOEVENTFD _IO(VFIO_TYPE, VFIO_BASE + 16) + /* -------- API for Type1 VFIO IOMMU -------- */ /** -- cgit v1.2.3 From e1577c1c881b09e9f15a743a4a1907815b74d0f7 Mon Sep 17 00:00:00 2001 From: Inbar Karmy Date: Mon, 20 Nov 2017 16:14:30 +0200 Subject: ethtool: Add support for configuring PFC stall prevention in ethtool In the event where the device unexpectedly becomes unresponsive for a long period of time, flow control mechanism may propagate pause frames which will cause congestion spreading to the entire network. To prevent this scenario, when the device is stalled for a period longer than a pre-configured timeout, flow control mechanisms are automatically disabled. This patch adds support for the ETHTOOL_PFC_STALL_PREVENTION as a tunable. This API provides support for configuring flow control storm prevention timeout (msec). Signed-off-by: Inbar Karmy Cc: Michal Kubecek Cc: Andrew Lunn Signed-off-by: Saeed Mahameed --- include/uapi/linux/ethtool.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 20da156aaf64..4ca65b56084f 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -217,10 +217,14 @@ struct ethtool_value { __u32 data; }; +#define PFC_STORM_PREVENTION_AUTO 0xffff +#define PFC_STORM_PREVENTION_DISABLE 0 + enum tunable_id { ETHTOOL_ID_UNSPEC, ETHTOOL_RX_COPYBREAK, ETHTOOL_TX_COPYBREAK, + ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ /* * Add your fresh new tubale attribute above and remember to update * tunable_strings[] in net/core/ethtool.c -- cgit v1.2.3 From 9ea393d8d8377b6da8ee25c6a114ec24c0687c7c Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Wed, 28 Mar 2018 18:43:57 +0300 Subject: stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate This adds SPDX GPL-2.0 header to to stm core files and removes the GPLv2 boilerplate text. Signed-off-by: Alexander Shishkin --- include/uapi/linux/stm.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/stm.h b/include/uapi/linux/stm.h index dbffdc23d804..29c89be72275 100644 --- a/include/uapi/linux/stm.h +++ b/include/uapi/linux/stm.h @@ -3,15 +3,6 @@ * System Trace Module (STM) userspace interfaces * Copyright (c) 2014, Intel Corporation. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * * STM class implements generic infrastructure for System Trace Module devices * as defined in MIPI STPv2 specification. */ -- cgit v1.2.3 From 4f0c7c6a12906e3571abb3c2b93eca8f727f4c9c Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Fri, 23 Feb 2018 13:19:43 +0200 Subject: stm class: Make dummy's master/channel ranges configurable To allow for more flexible testing of the stm class, make it possible to specify the ranges of masters and channels that the dummy_stm devices cover. This is done via module parameters. Signed-off-by: Alexander Shishkin --- include/uapi/linux/stm.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/stm.h b/include/uapi/linux/stm.h index 29c89be72275..7bac318b4440 100644 --- a/include/uapi/linux/stm.h +++ b/include/uapi/linux/stm.h @@ -12,6 +12,10 @@ #include +/* Maximum allowed master and channel values */ +#define STP_MASTER_MAX 0xffff +#define STP_CHANNEL_MAX 0xffff + /** * struct stp_policy_id - identification for the STP policy * @size: size of the structure including real id[] length -- cgit v1.2.3 From c4f6699dfcb8558d138fe838f741b2c10f416cf9 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 28 Mar 2018 12:05:37 -0700 Subject: bpf: introduce BPF_RAW_TRACEPOINT Introduce BPF_PROG_TYPE_RAW_TRACEPOINT bpf program type to access kernel internal arguments of the tracepoints in their raw form. >From bpf program point of view the access to the arguments look like: struct bpf_raw_tracepoint_args { __u64 args[0]; }; int bpf_prog(struct bpf_raw_tracepoint_args *ctx) { // program can read args[N] where N depends on tracepoint // and statically verified at program load+attach time } kprobe+bpf infrastructure allows programs access function arguments. This feature allows programs access raw tracepoint arguments. Similar to proposed 'dynamic ftrace events' there are no abi guarantees to what the tracepoints arguments are and what their meaning is. The program needs to type cast args properly and use bpf_probe_read() helper to access struct fields when argument is a pointer. For every tracepoint __bpf_trace_##call function is prepared. In assembler it looks like: (gdb) disassemble __bpf_trace_xdp_exception Dump of assembler code for function __bpf_trace_xdp_exception: 0xffffffff81132080 <+0>: mov %ecx,%ecx 0xffffffff81132082 <+2>: jmpq 0xffffffff811231f0 where TRACE_EVENT(xdp_exception, TP_PROTO(const struct net_device *dev, const struct bpf_prog *xdp, u32 act), The above assembler snippet is casting 32-bit 'act' field into 'u64' to pass into bpf_trace_run3(), while 'dev' and 'xdp' args are passed as-is. All of ~500 of __bpf_trace_*() functions are only 5-10 byte long and in total this approach adds 7k bytes to .text. This approach gives the lowest possible overhead while calling trace_xdp_exception() from kernel C code and transitioning into bpf land. Since tracepoint+bpf are used at speeds of 1M+ events per second this is valuable optimization. The new BPF_RAW_TRACEPOINT_OPEN sys_bpf command is introduced that returns anon_inode FD of 'bpf-raw-tracepoint' object. The user space looks like: // load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type prog_fd = bpf_prog_load(...); // receive anon_inode fd for given bpf_raw_tracepoint with prog attached raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd); Ctrl-C of tracing daemon or cmdline tool that uses this feature will automatically detach bpf program, unload it and unregister tracepoint probe. On the kernel side the __bpf_raw_tp_map section of pointers to tracepoint definition and to __bpf_trace_*() probe function is used to find a tracepoint with "xdp_exception" name and corresponding __bpf_trace_xdp_exception() probe function which are passed to tracepoint_probe_register() to connect probe with tracepoint. Addition of bpf_raw_tracepoint doesn't interfere with ftrace and perf tracepoint mechanisms. perf_event_open() can be used in parallel on the same tracepoint. Multiple bpf_raw_tracepoint_open("xdp_exception", prog_fd) are permitted. Each with its own bpf program. The kernel will execute all tracepoint probes and all attached bpf programs. In the future bpf_raw_tracepoints can be extended with query/introspection logic. __bpf_raw_tp_map section logic was contributed by Steven Rostedt Signed-off-by: Alexei Starovoitov Signed-off-by: Steven Rostedt (VMware) Acked-by: Steven Rostedt (VMware) Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 18b7c510c511..1878201c2d77 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -94,6 +94,7 @@ enum bpf_cmd { BPF_MAP_GET_FD_BY_ID, BPF_OBJ_GET_INFO_BY_FD, BPF_PROG_QUERY, + BPF_RAW_TRACEPOINT_OPEN, }; enum bpf_map_type { @@ -134,6 +135,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_SK_SKB, BPF_PROG_TYPE_CGROUP_DEVICE, BPF_PROG_TYPE_SK_MSG, + BPF_PROG_TYPE_RAW_TRACEPOINT, }; enum bpf_attach_type { @@ -344,6 +346,11 @@ union bpf_attr { __aligned_u64 prog_ids; __u32 prog_cnt; } query; + + struct { + __u64 name; + __u32 prog_fd; + } raw_tracepoint; } __attribute__((aligned(8))); /* BPF helper function descriptions: @@ -1152,4 +1159,8 @@ struct bpf_cgroup_dev_ctx { __u32 minor; }; +struct bpf_raw_tracepoint_args { + __u64 args[0]; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ -- cgit v1.2.3 From f8d16d3edb4dbae080df04318423c360de3c594d Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Mon, 26 Mar 2018 12:52:45 -0500 Subject: nl80211: Add SOCKET_OWNER support to JOIN_IBSS Signed-off-by: Denis Kenzior [johannes: fix race with wdev lock/unlock by just acquiring once] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 60fefc5a2ea4..266b43c4f6e1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1962,6 +1962,8 @@ enum nl80211_commands { * multicast group. * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the * station will deauthenticate when the socket is closed. + * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically + * torn down when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. -- cgit v1.2.3 From 188c1b3c04d69e842122daf201f07a34fcfad039 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Mon, 26 Mar 2018 12:52:46 -0500 Subject: nl80211: Add SOCKET_OWNER support to JOIN_MESH Signed-off-by: Denis Kenzior [johannes: fix race with wdev lock/unlock by just acquiring once] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 266b43c4f6e1..98eb37def37d 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1964,6 +1964,8 @@ enum nl80211_commands { * station will deauthenticate when the socket is closed. * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically * torn down when the socket is closed. + * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be + * automatically torn down when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. -- cgit v1.2.3 From 466a306142c002b40deaa58da94741af4153d1c4 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Mon, 26 Mar 2018 12:52:47 -0500 Subject: nl80211: Add SOCKET_OWNER support to START_AP Signed-off-by: Denis Kenzior Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 98eb37def37d..9ea3d6039eca 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1966,6 +1966,8 @@ enum nl80211_commands { * torn down when the socket is closed. * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be * automatically torn down when the socket is closed. + * If set during %NL80211_CMD_START_AP the AP will be automatically + * disabled when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. -- cgit v1.2.3 From 6a671a50f8199b3e1fe49fa8afff0fc8335da79c Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Mon, 26 Mar 2018 12:52:41 -0500 Subject: nl80211: Add CMD_CONTROL_PORT_FRAME API This commit also adds cfg80211_rx_control_port function. This is used to generate a CMD_CONTROL_PORT_FRAME event out to userspace. The conn_owner_nlportid is used as the unicast destination. This means that userspace must specify NL80211_ATTR_SOCKET_OWNER flag if control port over nl80211 routing is requested in NL80211_CMD_CONNECT, NL80211_CMD_ASSOCIATE, NL80211_CMD_START_AP or IBSS/mesh join. Signed-off-by: Denis Kenzior [johannes: fix return value of cfg80211_rx_control_port()] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9ea3d6039eca..6a3cc7a635b5 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -990,6 +990,17 @@ * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed * &NL80211_CMD_DISCONNECT should be indicated instead. * + * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request + * and RX notification. This command is used both as a request to transmit + * a control port frame and as a notification that a control port frame + * has been received. %NL80211_ATTR_FRAME is used to specify the + * frame contents. The frame is the raw EAPoL data, without ethernet or + * 802.11 headers. + * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added + * indicating the protocol type of the received frame; whether the frame + * was received unencrypted and the MAC address of the peer respectively. + * * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. * * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host @@ -1228,6 +1239,8 @@ enum nl80211_commands { NL80211_CMD_STA_OPMODE_CHANGED, + NL80211_CMD_CONTROL_PORT_FRAME, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From 2576a9ace47eba28a682d249d1d6402f891808c9 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Mon, 26 Mar 2018 12:52:42 -0500 Subject: nl80211: Implement TX of control port frames This commit implements the TX side of NL80211_CMD_CONTROL_PORT_FRAME. Userspace provides the raw EAPoL frame using NL80211_ATTR_FRAME. Userspace should also provide the destination address and the protocol type to use when sending the frame. This is used to implement TX of Pre-authentication frames. If CONTROL_PORT_ETHERTYPE_NO_ENCRYPT is specified, then the driver will be asked not to encrypt the outgoing frame. A new EXT_FEATURE flag is introduced so that nl80211 code can check whether a given wiphy has capability to pass EAPoL frames over nl80211. Signed-off-by: Denis Kenzior Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6a3cc7a635b5..3167d6f7fc68 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5024,6 +5024,8 @@ enum nl80211_feature_flags { * channel change triggered by radar detection event. * No need to start CAC from user-space, no need to react to * "radar detected" event. + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and + * receiving control port frames over nl80211 instead of the netdevice. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -5055,6 +5057,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_LOW_POWER_SCAN, NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, NL80211_EXT_FEATURE_DFS_OFFLOAD, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3 From 64bf3d4bc2b0725b3c5ffadd982a9746bfc738b7 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Mon, 26 Mar 2018 12:52:43 -0500 Subject: nl80211: Add CONTROL_PORT_OVER_NL80211 attribute Signed-off-by: Denis Kenzior Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3167d6f7fc68..15daf5e2638d 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -542,7 +542,8 @@ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and * %NL80211_ATTR_WIPHY_FREQ_HINT. * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are * restrictions on BSS selection, i.e., they effectively prevent roaming @@ -1488,6 +1489,15 @@ enum nl80211_commands { * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom * ethertype frames used for key negotiation must not be encrypted. + * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control + * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) + * will be sent directly to the network interface or sent via the NL80211 + * socket. If this attribute is missing, then legacy behavior of sending + * control port frames directly to the network interface is used. If the + * flag is included, then control port frames are sent over NL80211 instead + * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is + * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER + * flag. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -2647,6 +2657,8 @@ enum nl80211_attrs { NL80211_ATTR_NSS, NL80211_ATTR_ACK_SIGNAL, + NL80211_ATTR_CONTROL_PORT_OVER_NL80211, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 39c202d228c3da5a5531be847e9b06cc9b787f31 Mon Sep 17 00:00:00 2001 From: Bernie Harris Date: Wed, 21 Mar 2018 15:42:15 +1300 Subject: netfilter: ebtables: Add support for specifying match revision Currently ebtables assumes that the revision number of all match modules is 0, which is an issue when trying to use existing xtables matches with ebtables. The solution is to modify ebtables to allow extensions to specify a revision number, similar to iptables. This gets passed down to the kernel, which is then able to find the match module correctly. To main binary backwards compatibility, the size of the ebt_entry structures is not changed, only the size of the name field is decreased by 1 byte to make room for the revision field. Signed-off-by: Bernie Harris Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter_bridge/ebtables.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter_bridge/ebtables.h b/include/uapi/linux/netfilter_bridge/ebtables.h index 9ff57c0a0199..0c7dc8315013 100644 --- a/include/uapi/linux/netfilter_bridge/ebtables.h +++ b/include/uapi/linux/netfilter_bridge/ebtables.h @@ -20,6 +20,7 @@ #define EBT_TABLE_MAXNAMELEN 32 #define EBT_CHAIN_MAXNAMELEN EBT_TABLE_MAXNAMELEN #define EBT_FUNCTION_MAXNAMELEN EBT_TABLE_MAXNAMELEN +#define EBT_EXTENSION_MAXNAMELEN 31 /* verdicts >0 are "branches" */ #define EBT_ACCEPT -1 @@ -120,7 +121,10 @@ struct ebt_entries { struct ebt_entry_match { union { - char name[EBT_FUNCTION_MAXNAMELEN]; + struct { + char name[EBT_EXTENSION_MAXNAMELEN]; + uint8_t revision; + }; struct xt_match *match; } u; /* size of data */ @@ -130,7 +134,10 @@ struct ebt_entry_match { struct ebt_entry_watcher { union { - char name[EBT_FUNCTION_MAXNAMELEN]; + struct { + char name[EBT_EXTENSION_MAXNAMELEN]; + uint8_t revision; + }; struct xt_target *watcher; } u; /* size of data */ @@ -140,7 +147,10 @@ struct ebt_entry_watcher { struct ebt_entry_target { union { - char name[EBT_FUNCTION_MAXNAMELEN]; + struct { + char name[EBT_EXTENSION_MAXNAMELEN]; + uint8_t revision; + }; struct xt_target *target; } u; /* size of data */ -- cgit v1.2.3 From a5040c2d8dd732252609cde84ee3cdd6f1b1f927 Mon Sep 17 00:00:00 2001 From: Souvik Banerjee Date: Fri, 30 Mar 2018 14:32:42 -0500 Subject: blktrace: fix comment in blktrace_api.h The `__u64 time` field of the blk_io_trace struct refers to the time in nanoseconds, not in microseconds. It is set in __blk_add_trace, which does the following: t->time = ktime_to_ns(ktime_get()); ktime_to_ns returns ktime_t in nanoseconds, not microseconds. Signed-off-by: Souvik Banerjee Signed-off-by: Jens Axboe --- include/uapi/linux/blktrace_api.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/blktrace_api.h b/include/uapi/linux/blktrace_api.h index 3c50e07ee833..690621b610e5 100644 --- a/include/uapi/linux/blktrace_api.h +++ b/include/uapi/linux/blktrace_api.h @@ -101,7 +101,7 @@ enum blktrace_notify { struct blk_io_trace { __u32 magic; /* MAGIC << 8 | version */ __u32 sequence; /* event number */ - __u64 time; /* in microseconds */ + __u64 time; /* in nanoseconds */ __u64 sector; /* disk offset */ __u32 bytes; /* transfer length */ __u32 action; /* what happened */ -- cgit v1.2.3 From 5e43f899b03a3492ce5fc44e8900becb04dae9c0 Mon Sep 17 00:00:00 2001 From: Andrey Ignatov Date: Fri, 30 Mar 2018 15:08:00 -0700 Subject: bpf: Check attach type at prog load time == The problem == There are use-cases when a program of some type can be attached to multiple attach points and those attach points must have different permissions to access context or to call helpers. E.g. context structure may have fields for both IPv4 and IPv6 but it doesn't make sense to read from / write to IPv6 field when attach point is somewhere in IPv4 stack. Same applies to BPF-helpers: it may make sense to call some helper from some attach point, but not from other for same prog type. == The solution == Introduce `expected_attach_type` field in in `struct bpf_attr` for `BPF_PROG_LOAD` command. If scenario described in "The problem" section is the case for some prog type, the field will be checked twice: 1) At load time prog type is checked to see if attach type for it must be known to validate program permissions correctly. Prog will be rejected with EINVAL if it's the case and `expected_attach_type` is not specified or has invalid value. 2) At attach time `attach_type` is compared with `expected_attach_type`, if prog type requires to have one, and, if they differ, attach will be rejected with EINVAL. The `expected_attach_type` is now available as part of `struct bpf_prog` in both `bpf_verifier_ops->is_valid_access()` and `bpf_verifier_ops->get_func_proto()` () and can be used to check context accesses and calls to helpers correspondingly. Initially the idea was discussed by Alexei Starovoitov and Daniel Borkmann here: https://marc.info/?l=linux-netdev&m=152107378717201&w=2 Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 1878201c2d77..102718624d1e 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -296,6 +296,11 @@ union bpf_attr { __u32 prog_flags; char prog_name[BPF_OBJ_NAME_LEN]; __u32 prog_ifindex; /* ifindex of netdev to prep for */ + /* For some prog types expected attach type must be known at + * load time to verify attach type specific parts of prog + * (context accesses, allowed helpers, etc). + */ + __u32 expected_attach_type; }; struct { /* anonymous struct used by BPF_OBJ_* commands */ -- cgit v1.2.3 From 4fbac77d2d092b475dda9eea66da674369665427 Mon Sep 17 00:00:00 2001 From: Andrey Ignatov Date: Fri, 30 Mar 2018 15:08:02 -0700 Subject: bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 102718624d1e..ce3e69e3c793 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -136,6 +136,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_CGROUP_DEVICE, BPF_PROG_TYPE_SK_MSG, BPF_PROG_TYPE_RAW_TRACEPOINT, + BPF_PROG_TYPE_CGROUP_SOCK_ADDR, }; enum bpf_attach_type { @@ -147,6 +148,8 @@ enum bpf_attach_type { BPF_SK_SKB_STREAM_VERDICT, BPF_CGROUP_DEVICE, BPF_SK_MSG_VERDICT, + BPF_CGROUP_INET4_BIND, + BPF_CGROUP_INET6_BIND, __MAX_BPF_ATTACH_TYPE }; @@ -1010,6 +1013,26 @@ struct bpf_map_info { __u64 netns_ino; } __attribute__((aligned(8))); +/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed + * by user and intended to be used by socket (e.g. to bind to, depends on + * attach attach type). + */ +struct bpf_sock_addr { + __u32 user_family; /* Allows 4-byte read, but no write. */ + __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order. + */ + __u32 user_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. + * Stored in network byte order. + */ + __u32 user_port; /* Allows 4-byte read and write. + * Stored in network byte order + */ + __u32 family; /* Allows 4-byte read, but no write */ + __u32 type; /* Allows 4-byte read, but no write */ + __u32 protocol; /* Allows 4-byte read, but no write */ +}; + /* User bpf_sock_ops struct to access socket values and specify request ops * and their replies. * Some of this fields are in network (bigendian) byte order and may need -- cgit v1.2.3 From d74bad4e74ee373787a9ae24197c17b7cdc428d5 Mon Sep 17 00:00:00 2001 From: Andrey Ignatov Date: Fri, 30 Mar 2018 15:08:05 -0700 Subject: bpf: Hooks for sys_connect == The problem == See description of the problem in the initial patch of this patch set. == The solution == The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP. It adds new attach types `BPF_CGROUP_INET4_CONNECT` and `BPF_CGROUP_INET6_CONNECT` for program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both source and destination of a connection at connect(2) time. Local end of connection can be bound to desired IP using newly introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages `IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this: * looking for a free port is expensive and can affect performance significantly; * there is no use-case for port. As for remote end (`struct sockaddr *` passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup. Support is added for IPv4 and IPv6, for TCP and UDP. IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. == Implementation notes == The patch introduces new field in `struct proto`: `pre_connect` that is a pointer to a function with same signature as `connect` but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to `sk->sk_prot->connect`. Specifically `inet_dgram_connect` autobinds socket before calling `sk->sk_prot->connect` and there is no way to call `bpf_bind()` from hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since it'd cause double-bind. On the other hand `proto.pre_connect` provides a flexible way to add BPF hooks for connect only for necessary `proto` and call them at desired time before `connect`. Since `bpf_bind()` is allowed to bind only to IP and autobind in `inet_dgram_connect` binds only port there is no chance of double-bind. bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite of value of `bind_address_no_port` socket field. bpf_bind() sets `with_lock` to `false` when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock. Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index ce3e69e3c793..77afaf1ba556 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -150,6 +150,8 @@ enum bpf_attach_type { BPF_SK_MSG_VERDICT, BPF_CGROUP_INET4_BIND, BPF_CGROUP_INET6_BIND, + BPF_CGROUP_INET4_CONNECT, + BPF_CGROUP_INET6_CONNECT, __MAX_BPF_ATTACH_TYPE }; @@ -744,6 +746,13 @@ union bpf_attr { * @flags: reserved for future use * Return: SK_PASS * + * int bpf_bind(ctx, addr, addr_len) + * Bind socket to address. Only binding to IP is supported, no port can be + * set in addr. + * @ctx: pointer to context of type bpf_sock_addr + * @addr: pointer to struct sockaddr to bind socket to + * @addr_len: length of sockaddr structure + * Return: 0 on success or negative error code */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -809,7 +818,8 @@ union bpf_attr { FN(msg_redirect_map), \ FN(msg_apply_bytes), \ FN(msg_cork_bytes), \ - FN(msg_pull_data), + FN(msg_pull_data), \ + FN(bind), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call -- cgit v1.2.3 From aac3fc320d9404f2665a8b1249dc3170d5fa3caf Mon Sep 17 00:00:00 2001 From: Andrey Ignatov Date: Fri, 30 Mar 2018 15:08:07 -0700 Subject: bpf: Post-hooks for sys_bind "Post-hooks" are hooks that are called right before returning from sys_bind. At this time IP and port are already allocated and no further changes to `struct sock` can happen before returning from sys_bind but BPF program has a chance to inspect the socket and change sys_bind result. Specifically it can e.g. inspect what port was allocated and if it doesn't satisfy some policy, BPF program can force sys_bind to fail and return EPERM to user. Another example of usage is recording the IP:port pair to some map to use it in later calls to sys_connect. E.g. if some TCP server inside cgroup was bound to some IP:port_n, it can be recorded to a map. And later when some TCP client inside same cgroup is trying to connect to 127.0.0.1:port_n, BPF hook for sys_connect can override the destination and connect application to IP:port_n instead of 127.0.0.1:port_n. That helps forcing all applications inside a cgroup to use desired IP and not break those applications if they e.g. use localhost to communicate between each other. == Implementation details == Post-hooks are implemented as two new attach types `BPF_CGROUP_INET4_POST_BIND` and `BPF_CGROUP_INET6_POST_BIND` for existing prog type `BPF_PROG_TYPE_CGROUP_SOCK`. Separate attach types for IPv4 and IPv6 are introduced to avoid access to IPv6 field in `struct sock` from `inet_bind()` and to IPv4 field from `inet6_bind()` since those fields might not make sense in such cases. Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 77afaf1ba556..c5ec89732a8d 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -152,6 +152,8 @@ enum bpf_attach_type { BPF_CGROUP_INET6_BIND, BPF_CGROUP_INET4_CONNECT, BPF_CGROUP_INET6_CONNECT, + BPF_CGROUP_INET4_POST_BIND, + BPF_CGROUP_INET6_POST_BIND, __MAX_BPF_ATTACH_TYPE }; @@ -948,6 +950,15 @@ struct bpf_sock { __u32 protocol; __u32 mark; __u32 priority; + __u32 src_ip4; /* Allows 1,2,4-byte read. + * Stored in network byte order. + */ + __u32 src_ip6[4]; /* Allows 1,2,4-byte read. + * Stored in network byte order. + */ + __u32 src_port; /* Allows 4-byte read. + * Stored in host byte order + */ }; #define XDP_PACKET_HEADROOM 256 -- cgit v1.2.3 From 7a74d39cc2927302bc236397c1fdb1fe5be209ce Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Thu, 29 Mar 2018 23:20:44 +0200 Subject: tipc: tipc: rename address types in user api The three address type structs in the user API have names that in reality reflect the specific, non-Linux environment where they were originally created. We now give them more intuitive names, in accordance with how TIPC is described in the current documentation. struct tipc_portid -> struct tipc_socket_addr struct tipc_name -> struct tipc_service_addr struct tipc_name_seq -> struct tipc_service_range To avoid confusion, we also update some commmets and macro names to match the new terminology. For compatibility, we add macros that map all old names to the new ones. Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- include/uapi/linux/tipc.h | 57 +++++++++++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 24 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index 4ac9f1f02b06..156224ac3d74 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -45,33 +45,33 @@ * TIPC addressing primitives */ -struct tipc_portid { +struct tipc_socket_addr { __u32 ref; __u32 node; }; -struct tipc_name { +struct tipc_service_addr { __u32 type; __u32 instance; }; -struct tipc_name_seq { +struct tipc_service_range { __u32 type; __u32 lower; __u32 upper; }; /* - * Application-accessible port name types + * Application-accessible service types */ -#define TIPC_CFG_SRV 0 /* configuration service name type */ -#define TIPC_TOP_SRV 1 /* topology service name type */ -#define TIPC_LINK_STATE 2 /* link state name type */ -#define TIPC_RESERVED_TYPES 64 /* lowest user-publishable name type */ +#define TIPC_NODE_STATE 0 /* node state service type */ +#define TIPC_TOP_SRV 1 /* topology server service type */ +#define TIPC_LINK_STATE 2 /* link state service type */ +#define TIPC_RESERVED_TYPES 64 /* lowest user-allowed service type */ /* - * Publication scopes when binding port names and port name sequences + * Publication scopes when binding service / service range */ enum tipc_scope { TIPC_CLUSTER_SCOPE = 2, /* 0 can also be used */ @@ -108,28 +108,28 @@ enum tipc_scope { * TIPC topology subscription service definitions */ -#define TIPC_SUB_PORTS 0x01 /* filter for port availability */ -#define TIPC_SUB_SERVICE 0x02 /* filter for service availability */ -#define TIPC_SUB_CANCEL 0x04 /* cancel a subscription */ +#define TIPC_SUB_PORTS 0x01 /* filter: evt at each match */ +#define TIPC_SUB_SERVICE 0x02 /* filter: evt at first up/last down */ +#define TIPC_SUB_CANCEL 0x04 /* filter: cancel a subscription */ #define TIPC_WAIT_FOREVER (~0) /* timeout for permanent subscription */ struct tipc_subscr { - struct tipc_name_seq seq; /* name sequence of interest */ + struct tipc_service_range seq; /* range of interest */ __u32 timeout; /* subscription duration (in ms) */ __u32 filter; /* bitmask of filter options */ char usr_handle[8]; /* available for subscriber use */ }; #define TIPC_PUBLISHED 1 /* publication event */ -#define TIPC_WITHDRAWN 2 /* withdraw event */ +#define TIPC_WITHDRAWN 2 /* withdrawal event */ #define TIPC_SUBSCR_TIMEOUT 3 /* subscription timeout event */ struct tipc_event { __u32 event; /* event type */ - __u32 found_lower; /* matching name seq instances */ - __u32 found_upper; /* " " " " */ - struct tipc_portid port; /* associated port */ + __u32 found_lower; /* matching range */ + __u32 found_upper; /* " " */ + struct tipc_socket_addr port; /* associated socket */ struct tipc_subscr s; /* associated subscription */ }; @@ -149,20 +149,20 @@ struct tipc_event { #define SOL_TIPC 271 #endif -#define TIPC_ADDR_NAMESEQ 1 -#define TIPC_ADDR_MCAST 1 -#define TIPC_ADDR_NAME 2 -#define TIPC_ADDR_ID 3 +#define TIPC_ADDR_MCAST 1 +#define TIPC_SERVICE_RANGE 1 +#define TIPC_SERVICE_ADDR 2 +#define TIPC_SOCKET_ADDR 3 struct sockaddr_tipc { unsigned short family; unsigned char addrtype; signed char scope; union { - struct tipc_portid id; - struct tipc_name_seq nameseq; + struct tipc_socket_addr id; + struct tipc_service_range nameseq; struct { - struct tipc_name name; + struct tipc_service_addr name; __u32 domain; } name; } addr; @@ -230,8 +230,13 @@ struct tipc_sioc_ln_req { /* The macros and functions below are deprecated: */ +#define TIPC_CFG_SRV 0 #define TIPC_ZONE_SCOPE 1 +#define TIPC_ADDR_NAMESEQ 1 +#define TIPC_ADDR_NAME 2 +#define TIPC_ADDR_ID 3 + #define TIPC_NODE_BITS 12 #define TIPC_CLUSTER_BITS 12 #define TIPC_ZONE_BITS 8 @@ -250,6 +255,10 @@ struct tipc_sioc_ln_req { #define TIPC_ZONE_CLUSTER_MASK (TIPC_ZONE_MASK | TIPC_CLUSTER_MASK) +#define tipc_portid tipc_socket_addr +#define tipc_name tipc_service_addr +#define tipc_name_seq tipc_service_range + static inline __u32 tipc_addr(unsigned int zone, unsigned int cluster, unsigned int node) -- cgit v1.2.3 From 7494cfa6d36d1556f17baa012dd93833620783db Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Thu, 29 Mar 2018 23:20:45 +0200 Subject: tipc: avoid possible string overflow gcc points out that the combined length of the fixed-length inputs to l->name is larger than the destination buffer size: net/tipc/link.c: In function 'tipc_link_create': net/tipc/link.c:465:26: error: '%s' directive writing up to 32 bytes into a region of size between 26 and 58 [-Werror=format-overflow=] sprintf(l->name, "%s:%s-%s:unknown", self_str, if_name, peer_str); net/tipc/link.c:465:2: note: 'sprintf' output 11 or more bytes (assuming 75) into a destination of size 60 sprintf(l->name, "%s:%s-%s:unknown", self_str, if_name, peer_str); A detailed analysis reveals that the theoretical maximum length of a link name is: max self_str + 1 + max if_name + 1 + max peer_str + 1 + max if_name = 16 + 1 + 15 + 1 + 16 + 1 + 15 = 65 Since we also need space for a trailing zero we now set MAX_LINK_NAME to 68. Just to be on the safe side we also replace the sprintf() call with snprintf(). Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Reported-by: Arnd Bergmann Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- include/uapi/linux/tipc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index 156224ac3d74..bf6d28677cfe 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -216,7 +216,7 @@ struct tipc_group_req { #define TIPC_MAX_MEDIA_NAME 16 #define TIPC_MAX_IF_NAME 16 #define TIPC_MAX_BEARER_NAME 32 -#define TIPC_MAX_LINK_NAME 60 +#define TIPC_MAX_LINK_NAME 68 #define SIOCGETLINKNAME SIOCPROTOPRIVATE -- cgit v1.2.3 From 1eb5fa849f2bf9186a618e85bea23f02e527540a Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 28 Feb 2018 15:59:59 -0500 Subject: dm: allow targets to return output from messages they are sent Could be useful for a target to return stats or other information. If a target does DMEMIT() anything to @result from its .message method then it must return 1 to the caller. Signed-off-By: Mike Snitzer --- include/uapi/linux/dm-ioctl.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 14c44ec8b622..5108da02cd32 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -270,9 +270,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 37 +#define DM_VERSION_MINOR 38 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2017-09-20)" +#define DM_VERSION_EXTRA "-ioctl (2018-02-28)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ -- cgit v1.2.3 From 971888c46993f871f20d02d1fe43486a924fad11 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 3 Apr 2018 15:05:12 -0400 Subject: dm: hold DM table for duration of ioctl rather than use blkdev_get Commit 519049afead ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") inadvertantly introduced a regression relative to users of device cgroups that issue ioctls (e.g. libvirt). Using blkdev_get() in DM's passthrough ioctl support implicitly introduced a cgroup permissions check that would fail unless care were taken to add all devices in the IO stack to the device cgroup. E.g. rather than just adding the top-level DM multipath device to the cgroup all the underlying devices would need to be allowed. Fix this, to no longer require allowing all underlying devices, by simply holding the live DM table (which includes the table's original blkdev_get() reference on the blockdevice that the ioctl will be issued to) for the duration of the ioctl. Also, bump the DM ioctl version so a user can know that their device cgroup allow workaround is no longer needed. Reported-by: Michal Privoznik Suggested-by: Mikulas Patocka Fixes: 519049afead ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") Cc: stable@vger.kernel.org # 4.16 Signed-off-by: Mike Snitzer --- include/uapi/linux/dm-ioctl.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 5108da02cd32..d1e49514977b 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -270,9 +270,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 38 +#define DM_VERSION_MINOR 39 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2018-02-28)" +#define DM_VERSION_EXTRA "-ioctl (2018-04-03)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ -- cgit v1.2.3 From 6c64fe7f2adcee21d7c4247f1ec021fd18428fc4 Mon Sep 17 00:00:00 2001 From: Jonathan Helman Date: Mon, 19 Mar 2018 15:14:14 -0700 Subject: virtio_balloon: export hugetlb page allocation counts Export the number of successful and failed hugetlb page allocations via the virtio balloon driver. These 2 counts come directly from the vm_events HTLB_BUDDY_PGALLOC and HTLB_BUDDY_PGALLOC_FAIL. Signed-off-by: Jonathan Helman Signed-off-by: Michael S. Tsirkin Reviewed-by: Jason Wang --- include/uapi/linux/virtio_balloon.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h index 4e8b8304b793..40297a3181ed 100644 --- a/include/uapi/linux/virtio_balloon.h +++ b/include/uapi/linux/virtio_balloon.h @@ -53,7 +53,9 @@ struct virtio_balloon_config { #define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */ #define VIRTIO_BALLOON_S_AVAIL 6 /* Available memory as in /proc */ #define VIRTIO_BALLOON_S_CACHES 7 /* Disk caches */ -#define VIRTIO_BALLOON_S_NR 8 +#define VIRTIO_BALLOON_S_HTLB_PGALLOC 8 /* Hugetlb page allocations */ +#define VIRTIO_BALLOON_S_HTLB_PGFAIL 9 /* Hugetlb page allocation failures */ +#define VIRTIO_BALLOON_S_NR 10 /* * Memory statistics structure. -- cgit v1.2.3 From c21a6970ae727839a2f300cd8dd957de0d0238c3 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Tue, 10 Apr 2018 16:35:23 -0700 Subject: ipc/shm: introduce shmctl(SHM_STAT_ANY) Patch series "sysvipc: introduce STAT_ANY commands", v2. The following patches adds the discussed (see [1]) new command for shm as well as for sems and msq as they are subject to the same discrepancies for ipc object permission checks between the syscall and via procfs. These new commands are justified in that (1) we are stuck with this semantics as changing syscall and procfs can break userland; and (2) some users can benefit from performance (for large amounts of shm segments, for example) from not having to parse the procfs interface. Once merged, I will submit the necesary manpage updates. But I'm thinking something like: : diff --git a/man2/shmctl.2 b/man2/shmctl.2 : index 7bb503999941..bb00bbe21a57 100644 : --- a/man2/shmctl.2 : +++ b/man2/shmctl.2 : @@ -41,6 +41,7 @@ : .\" 2005-04-25, mtk -- noted aberrant Linux behavior w.r.t. new : .\" attaches to a segment that has already been marked for deletion. : .\" 2005-08-02, mtk: Added IPC_INFO, SHM_INFO, SHM_STAT descriptions. : +.\" 2018-02-13, dbueso: Added SHM_STAT_ANY description. : .\" : .TH SHMCTL 2 2017-09-15 "Linux" "Linux Programmer's Manual" : .SH NAME : @@ -242,6 +243,18 @@ However, the : argument is not a segment identifier, but instead an index into : the kernel's internal array that maintains information about : all shared memory segments on the system. : +.TP : +.BR SHM_STAT_ANY " (Linux-specific)" : +Return a : +.I shmid_ds : +structure as for : +.BR SHM_STAT . : +However, the : +.I shm_perm.mode : +is not checked for read access for : +.IR shmid , : +resembing the behaviour of : +/proc/sysvipc/shm. : .PP : The caller can prevent or allow swapping of a shared : memory segment with the following \fIcmd\fP values: : @@ -287,7 +300,7 @@ operation returns the index of the highest used entry in the : kernel's internal array recording information about all : shared memory segments. : (This information can be used with repeated : -.B SHM_STAT : +.B SHM_STAT/SHM_STAT_ANY : operations to obtain information about all shared memory segments : on the system.) : A successful : @@ -328,7 +341,7 @@ isn't accessible. : \fIshmid\fP is not a valid identifier, or \fIcmd\fP : is not a valid command. : Or: for a : -.B SHM_STAT : +.B SHM_STAT/SHM_STAT_ANY : operation, the index value specified in : .I shmid : referred to an array slot that is currently unused. This patch (of 3): There is a permission discrepancy when consulting shm ipc object metadata between /proc/sysvipc/shm (0444) and the SHM_STAT shmctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the shm metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases. This patch introduces a new SHM_STAT_ANY command such that the shm ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. [1] https://lkml.org/lkml/2017/12/19/220 Link: http://lkml.kernel.org/r/20180215162458.10059-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Acked-by: Michal Hocko Cc: Michael Kerrisk Cc: Manfred Spraul Cc: Eric W. Biederman Cc: Kees Cook Cc: Robert Kettler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/uapi/linux/shm.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h index 4de12a39b075..dde1344f047c 100644 --- a/include/uapi/linux/shm.h +++ b/include/uapi/linux/shm.h @@ -83,8 +83,9 @@ struct shmid_ds { #define SHM_UNLOCK 12 /* ipcs ctl commands */ -#define SHM_STAT 13 -#define SHM_INFO 14 +#define SHM_STAT 13 +#define SHM_INFO 14 +#define SHM_STAT_ANY 15 /* Obsolete, used only for backwards compatibility */ struct shminfo { -- cgit v1.2.3 From a280d6dc77eb6002f269d58cd47c7c7e69b617b6 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Tue, 10 Apr 2018 16:35:26 -0700 Subject: ipc/sem: introduce semctl(SEM_STAT_ANY) There is a permission discrepancy when consulting shm ipc object metadata between /proc/sysvipc/sem (0444) and the SEM_STAT semctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the sma metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases for shm. This patch introduces a new SEM_STAT_ANY command such that the sem ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. Link: http://lkml.kernel.org/r/20180215162458.10059-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Reported-by: Robert Kettler Cc: Eric W. Biederman Cc: Kees Cook Cc: Manfred Spraul Cc: Michael Kerrisk Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/uapi/linux/sem.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sem.h b/include/uapi/linux/sem.h index 9c3e745b0656..39a1876f039e 100644 --- a/include/uapi/linux/sem.h +++ b/include/uapi/linux/sem.h @@ -19,6 +19,7 @@ /* ipcs ctl cmds */ #define SEM_STAT 18 #define SEM_INFO 19 +#define SEM_STAT_ANY 20 /* Obsolete, used only for backwards compatibility and libc5 compiles */ struct semid_ds { -- cgit v1.2.3 From 23c8cec8cf679b10997a512abb1e86f0cedc42ba Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Tue, 10 Apr 2018 16:35:30 -0700 Subject: ipc/msg: introduce msgctl(MSG_STAT_ANY) There is a permission discrepancy when consulting msq ipc object metadata between /proc/sysvipc/msg (0444) and the MSG_STAT shmctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the msq metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases for shm. This patch introduces a new MSG_STAT_ANY command such that the msq ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. Link: http://lkml.kernel.org/r/20180215162458.10059-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Reported-by: Robert Kettler Cc: Eric W. Biederman Cc: Kees Cook Cc: Manfred Spraul Cc: Michael Kerrisk Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/uapi/linux/msg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h index 5d5ab81dc9be..e4a0d9a9a9e8 100644 --- a/include/uapi/linux/msg.h +++ b/include/uapi/linux/msg.h @@ -7,6 +7,7 @@ /* ipcs ctl commands */ #define MSG_STAT 11 #define MSG_INFO 12 +#define MSG_STAT_ANY 13 /* msgrcv options */ #define MSG_NOERROR 010000 /* no error if message is too big */ -- cgit v1.2.3 From 2a6cc8a6c0cb44baf7df2f64e5090aaf726002c3 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 10 Apr 2018 16:36:15 -0700 Subject: linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI Patch series "linux/const.h: cleanups of macros such as UL(), _BITUL(), BIT() etc", v3. ARM, ARM64, UniCore32 define UL() as a shorthand of _AC(..., UL). More architectures may introduce it in the future. UL() is arch-agnostic, and useful. So let's move it to include/linux/const.h Currently, must be included to use UL(). It pulls in more bloats just for defining some bit macros. I posted V2 one year ago. The previous posts are: https://patchwork.kernel.org/patch/9498273/ https://patchwork.kernel.org/patch/9498275/ https://patchwork.kernel.org/patch/9498269/ https://patchwork.kernel.org/patch/9498271/ At that time, what blocked this series was a comment from David Howells: You need to be very careful doing this. Some userspace stuff depends on the guard macro names on the kernel header files. (https://patchwork.kernel.org/patch/9498275/) Looking at the code closer, I noticed this is not a problem. See the following line. https://github.com/torvalds/linux/blob/v4.16-rc2/scripts/headers_install.sh#L40 scripts/headers_install.sh rips off _UAPI prefix from guard macro names. I ran "make headers_install" and confirmed the result is what I expect. So, we can prefix the include guard of include/uapi/linux/const.h, and add a new include/linux/const.h. This patch (of 4): I am going to add include/linux/const.h for the kernel space. Add _UAPI to the include guard of include/uapi/linux/const.h to prepare for that. Please notice the guard name of the exported one will be kept as-is. So, this commit has no impact to the userspace even if some userspace stuff depends on the guard macro names. scripts/headers_install.sh processes exported headers by SED, and rips off "_UAPI" from guard macro names. #ifndef _UAPI_LINUX_CONST_H #define _UAPI_LINUX_CONST_H will be turned into #ifndef _LINUX_CONST_H #define _LINUX_CONST_H Link: http://lkml.kernel.org/r/1519301715-31798-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Cc: David Howells Cc: Will Deacon Cc: Guan Xuetao Cc: Geert Uytterhoeven Cc: Catalin Marinas Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/uapi/linux/const.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h index 92537757590a..c5a60ebabf5e 100644 --- a/include/uapi/linux/const.h +++ b/include/uapi/linux/const.h @@ -1,8 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* const.h: Macros for dealing with constants. */ -#ifndef _LINUX_CONST_H -#define _LINUX_CONST_H +#ifndef _UAPI_LINUX_CONST_H +#define _UAPI_LINUX_CONST_H /* Some constant macros are used in both assembler and * C code. Therefore we cannot annotate them always with @@ -25,4 +25,4 @@ #define _BITUL(x) (_AC(1,UL) << (x)) #define _BITULL(x) (_AC(1,ULL) << (x)) -#endif /* !(_LINUX_CONST_H) */ +#endif /* _UAPI_LINUX_CONST_H */ -- cgit v1.2.3 From 2dd8a62c647691161a2346546834262597739872 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 10 Apr 2018 16:36:19 -0700 Subject: linux/const.h: move UL() macro to include/linux/const.h ARM, ARM64 and UniCore32 duplicate the definition of UL(): #define UL(x) _AC(x, UL) This is not actually arch-specific, so it will be useful to move it to a common header. Currently, we only have the uapi variant for linux/const.h, so I am creating include/linux/const.h. I also added _UL(), _ULL() and ULL() because _AC() is mostly used in the form either _AC(..., UL) or _AC(..., ULL). I expect they will be replaced in follow-up cleanups. The underscore-prefixed ones should be used for exported headers. Link: http://lkml.kernel.org/r/1519301715-31798-4-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Acked-by: Guan Xuetao Acked-by: Catalin Marinas Acked-by: Russell King Cc: David Howells Cc: Geert Uytterhoeven Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/uapi/linux/const.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h index c5a60ebabf5e..09bc0e0e97e3 100644 --- a/include/uapi/linux/const.h +++ b/include/uapi/linux/const.h @@ -22,6 +22,9 @@ #define _AT(T,X) ((T)(X)) #endif +#define _UL(x) (_AC(x, UL)) +#define _ULL(x) (_AC(x, ULL)) + #define _BITUL(x) (_AC(1,UL) << (x)) #define _BITULL(x) (_AC(1,ULL) << (x)) -- cgit v1.2.3 From 21e7bc600e3b662020c05fd0749bcf85f16336f7 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 10 Apr 2018 16:36:24 -0700 Subject: linux/const.h: refactor _BITUL and _BITULL a bit Minor cleanups available by _UL and _ULL. Link: http://lkml.kernel.org/r/1519301715-31798-5-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Cc: Catalin Marinas Cc: David Howells Cc: Geert Uytterhoeven Cc: Guan Xuetao Cc: Russell King Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/uapi/linux/const.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h index 09bc0e0e97e3..5ed721ad5b19 100644 --- a/include/uapi/linux/const.h +++ b/include/uapi/linux/const.h @@ -25,7 +25,7 @@ #define _UL(x) (_AC(x, UL)) #define _ULL(x) (_AC(x, ULL)) -#define _BITUL(x) (_AC(1,UL) << (x)) -#define _BITULL(x) (_AC(1,ULL) << (x)) +#define _BITUL(x) (_UL(1) << (x)) +#define _BITULL(x) (_ULL(1) << (x)) #endif /* _UAPI_LINUX_CONST_H */ -- cgit v1.2.3 From d848e5f8e1ebdb227d045db55fe4f825e82965fa Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 11 Apr 2018 16:32:17 -0400 Subject: random: add new ioctl RNDRESEEDCRNG Add a new ioctl which forces the the crng to be reseeded. Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- include/uapi/linux/random.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h index c34f4490d025..26ee91300e3e 100644 --- a/include/uapi/linux/random.h +++ b/include/uapi/linux/random.h @@ -35,6 +35,9 @@ /* Clear the entropy pool and associated counters. (Superuser only.) */ #define RNDCLEARPOOL _IO( 'R', 0x06 ) +/* Reseed CRNG. (Superuser only.) */ +#define RNDRESEEDCRNG _IO( 'R', 0x07 ) + struct rand_pool_info { int entropy_count; int buf_size; -- cgit v1.2.3 From edf5c17d866eada03b8750368a12dc3def77d608 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 5 Apr 2018 16:15:55 +0200 Subject: staging: irda: remove remaining remants of irda code removal There were some documentation locations that irda was mentioned, as well as an old MAINTAINERS entry and the networking sysctl entries. Clean these all out as this stuff really is finally gone. Reported-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/sysctl.h | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h index 0f272818a4d2..6b58371b1f0d 100644 --- a/include/uapi/linux/sysctl.h +++ b/include/uapi/linux/sysctl.h @@ -780,24 +780,6 @@ enum { NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5, }; -/* proc/sys/net/irda */ -enum { - NET_IRDA_DISCOVERY=1, - NET_IRDA_DEVNAME=2, - NET_IRDA_DEBUG=3, - NET_IRDA_FAST_POLL=4, - NET_IRDA_DISCOVERY_SLOTS=5, - NET_IRDA_DISCOVERY_TIMEOUT=6, - NET_IRDA_SLOT_TIMEOUT=7, - NET_IRDA_MAX_BAUD_RATE=8, - NET_IRDA_MIN_TX_TURN_TIME=9, - NET_IRDA_MAX_TX_DATA_SIZE=10, - NET_IRDA_MAX_TX_WINDOW=11, - NET_IRDA_MAX_NOREPLY_TIME=12, - NET_IRDA_WARN_NOREPLY_TIME=13, - NET_IRDA_LAP_KEEPALIVE_TIME=14, -}; - /* CTL_FS names: */ enum -- cgit v1.2.3 From 101592b4904ecf6b8ed2a4784d41d180319d95a1 Mon Sep 17 00:00:00 2001 From: Alexey Budankov Date: Mon, 9 Apr 2018 10:25:32 +0300 Subject: perf/core: Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE] Store preempting context switch out event into Perf trace as a part of PERF_RECORD_SWITCH[_CPU_WIDE] record. Percentage of preempting and non-preempting context switches help understanding the nature of workloads (CPU or IO bound) that are running on a machine; The event is treated as preemption one when task->state value of the thread being switched out is TASK_RUNNING. Event type encoding is implemented using PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit; Signed-off-by: Alexey Budankov Acked-by: Peter Zijlstra Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/9ff84e83-a0ca-dd82-a6d0-cb951689be74@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- include/uapi/linux/perf_event.h | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 912b85b52344..b8e288a1f740 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -650,11 +650,23 @@ struct perf_event_mmap_page { #define PERF_RECORD_MISC_COMM_EXEC (1 << 13) #define PERF_RECORD_MISC_SWITCH_OUT (1 << 13) /* - * Indicates that the content of PERF_SAMPLE_IP points to - * the actual instruction that triggered the event. See also - * perf_event_attr::precise_ip. + * These PERF_RECORD_MISC_* flags below are safely reused + * for the following events: + * + * PERF_RECORD_MISC_EXACT_IP - PERF_RECORD_SAMPLE of precise events + * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT - PERF_RECORD_SWITCH* events + * + * + * PERF_RECORD_MISC_EXACT_IP: + * Indicates that the content of PERF_SAMPLE_IP points to + * the actual instruction that triggered the event. See also + * perf_event_attr::precise_ip. + * + * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT: + * Indicates that thread was preempted in TASK_RUNNING state. */ #define PERF_RECORD_MISC_EXACT_IP (1 << 14) +#define PERF_RECORD_MISC_SWITCH_OUT_PREEMPT (1 << 14) /* * Reserve the last bit to indicate some extended misc field */ -- cgit v1.2.3 From b40000325044433cd350725e2025214ae48b17fd Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 13 Apr 2018 16:37:04 +0300 Subject: virtio_balloon: add array of stat names Jason Wang points out that it's very hard for users to build an array of stat names. The naive thing is to use VIRTIO_BALLOON_S_NR but that breaks if we add more stats - as done e.g. recently by commit 6c64fe7f2 ("virtio_balloon: export hugetlb page allocation counts"). Let's add an array of reasonably readable names. Fixes: 6c64fe7f2 ("virtio_balloon: export hugetlb page allocation counts") Cc: Jason Wang Signed-off-by: Michael S. Tsirkin Reviewed-by: Jonathan Helman --- include/uapi/linux/virtio_balloon.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h index 40297a3181ed..13b8cb563892 100644 --- a/include/uapi/linux/virtio_balloon.h +++ b/include/uapi/linux/virtio_balloon.h @@ -57,6 +57,21 @@ struct virtio_balloon_config { #define VIRTIO_BALLOON_S_HTLB_PGFAIL 9 /* Hugetlb page allocation failures */ #define VIRTIO_BALLOON_S_NR 10 +#define VIRTIO_BALLOON_S_NAMES_WITH_PREFIX(VIRTIO_BALLOON_S_NAMES_prefix) { \ + VIRTIO_BALLOON_S_NAMES_prefix "swap-in", \ + VIRTIO_BALLOON_S_NAMES_prefix "swap-out", \ + VIRTIO_BALLOON_S_NAMES_prefix "major-faults", \ + VIRTIO_BALLOON_S_NAMES_prefix "minor-faults", \ + VIRTIO_BALLOON_S_NAMES_prefix "free-memory", \ + VIRTIO_BALLOON_S_NAMES_prefix "total-memory", \ + VIRTIO_BALLOON_S_NAMES_prefix "available-memory", \ + VIRTIO_BALLOON_S_NAMES_prefix "disk-caches", \ + VIRTIO_BALLOON_S_NAMES_prefix "hugetlb-allocations", \ + VIRTIO_BALLOON_S_NAMES_prefix "hugetlb-failures" \ +} + +#define VIRTIO_BALLOON_S_NAMES VIRTIO_BALLOON_S_NAMES_WITH_PREFIX("") + /* * Memory statistics structure. * Driver fills an array of these structures and passes to device. -- cgit v1.2.3 From a3ed0e4393d6885b4af7ce84b437dc696490a530 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 25 Apr 2018 15:33:38 +0200 Subject: Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME Revert commits 92af4dcb4e1c ("tracing: Unify the "boot" and "mono" tracing clocks") 127bfa5f4342 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior") 7250a4047aa6 ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior") d6c7270e913d ("timekeeping: Remove boot time specific code") f2d6fdbfd238 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior") d6ed449afdb3 ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock") 72199320d49d ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock") As stated in the pull request for the unification of CLOCK_MONOTONIC and CLOCK_BOOTTIME, it was clear that we might have to revert the change. As reported by several folks systemd and other applications rely on the documented behaviour of CLOCK_MONOTONIC on Linux and break with the above changes. After resume daemons time out and other timeout related issues are observed. Rafael compiled this list: * systemd kills daemons on resume, after >WatchdogSec seconds of suspending (Genki Sky). [Verified that that's because systemd uses CLOCK_MONOTONIC and expects it to not include the suspend time.] * systemd-journald misbehaves after resume: systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal corrupted or uncleanly shut down, renaming and replacing. (Mike Galbraith). * NetworkManager reports "networking disabled" and networking is broken after resume 50% of the time (Pavel). [May be because of systemd.] * MATE desktop dims the display and starts the screensaver right after system resume (Pavel). * Full system hang during resume (me). [May be due to systemd or NM or both.] That happens on debian and open suse systems. It's sad, that these problems were neither catched in -next nor by those folks who expressed interest in this change. Reported-by: Rafael J. Wysocki Reported-by: Genki Sky , Reported-by: Pavel Machek Signed-off-by: Thomas Gleixner Cc: Dmitry Torokhov Cc: John Stultz Cc: Jonathan Corbet Cc: Kevin Easton Cc: Linus Torvalds Cc: Mark Salyzyn Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Petr Mladek Cc: Prarit Bhargava Cc: Sergey Senozhatsky Cc: Steven Rostedt --- include/uapi/linux/time.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h index 16a296612ba4..4c0338ea308a 100644 --- a/include/uapi/linux/time.h +++ b/include/uapi/linux/time.h @@ -73,7 +73,6 @@ struct __kernel_old_timeval { */ #define CLOCK_SGI_CYCLE 10 #define CLOCK_TAI 11 -#define CLOCK_MONOTONIC_ACTIVE 12 #define MAX_CLOCKS 16 #define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC) -- cgit v1.2.3 From 5e62493f1a70e7f13059544daaee05e40e8548e2 Mon Sep 17 00:00:00 2001 From: KarimAllah Ahmed Date: Tue, 17 Apr 2018 06:43:58 +0200 Subject: x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move DISABLE_EXITS KVM capability bits to the UAPI just like the rest of capabilities. Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Thomas Gleixner Cc: Ingo Molnar Cc: H. Peter Anvin Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: KarimAllah Ahmed Signed-off-by: Radim Krčmář --- include/uapi/linux/kvm.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 1065006c9bf5..b02c41e53d56 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -676,6 +676,13 @@ struct kvm_ioeventfd { __u8 pad[36]; }; +#define KVM_X86_DISABLE_EXITS_MWAIT (1 << 0) +#define KVM_X86_DISABLE_EXITS_HTL (1 << 1) +#define KVM_X86_DISABLE_EXITS_PAUSE (1 << 2) +#define KVM_X86_DISABLE_VALID_EXITS (KVM_X86_DISABLE_EXITS_MWAIT | \ + KVM_X86_DISABLE_EXITS_HTL | \ + KVM_X86_DISABLE_EXITS_PAUSE) + /* for KVM_ENABLE_CAP */ struct kvm_enable_cap { /* in */ -- cgit v1.2.3