From 36647055b37ec78e9068f470f14e7cd75c001c22 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= Date: Tue, 18 Dec 2018 17:02:07 -0800 Subject: cfg80211: Add airtime statistics and settings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds TX airtime statistics to the cfg80211 station dump (to go along with the RX info already present), and adds a new parameter to set the airtime weight of each station. The latter allows userspace to implement policies for different stations by varying their weights. Signed-off-by: Toke Høiland-Jørgensen [rmanohar@codeaurora.org: fixed checkpatch warnings] Signed-off-by: Rajkumar Manoharan [move airtime weight != 0 check into policy] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 31ae5c7f10e3..ebe79e12c82e 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2299,6 +2299,9 @@ enum nl80211_commands { * This is also used for capability advertisement in the wiphy information, * with the appropriate sub-attributes. * + * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime + * scheduler. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2748,6 +2751,8 @@ enum nl80211_attrs { NL80211_ATTR_PEER_MEASUREMENTS, + NL80211_ATTR_AIRTIME_WEIGHT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3125,6 +3130,9 @@ enum nl80211_sta_bss_param { * might not be fully accurate. * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a * mesh gate (u8, 0 or 1) + * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames + * sent to the station (u64, usec) + * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3168,6 +3176,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_RX_MPDUS, NL80211_STA_INFO_FCS_ERROR_COUNT, NL80211_STA_INFO_CONNECTED_TO_GATE, + NL80211_STA_INFO_TX_DURATION, + NL80211_STA_INFO_AIRTIME_WEIGHT, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -5316,6 +5326,10 @@ enum nl80211_feature_flags { * if this flag is not set. Ignoring this can leak clear text packets and/or * freeze the connection. * + * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime + * fairness for transmitted packets and has enabled airtime fairness + * scheduling. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5355,6 +5369,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, + NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3 From cc24163690997c685641d84e77ff6f1c592b06fe Mon Sep 17 00:00:00 2001 From: Julan Hsu Date: Tue, 15 Jan 2019 15:28:42 -0800 Subject: nl80211/mac80211: mesh: add hop count to mpath info Expose hop count to destination information in mpath info Signed-off-by: Julan Hsu Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ebe79e12c82e..213a1d7c1063 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3287,6 +3287,7 @@ enum nl80211_mpath_flags { * &enum nl80211_mpath_flags; * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number * currently defind * @__NL80211_MPATH_INFO_AFTER_LAST: internal use @@ -3300,6 +3301,7 @@ enum nl80211_mpath_info { NL80211_MPATH_INFO_FLAGS, NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, NL80211_MPATH_INFO_DISCOVERY_RETRIES, + NL80211_MPATH_INFO_HOP_COUNT, /* keep last */ __NL80211_MPATH_INFO_AFTER_LAST, -- cgit v1.2.3 From 540bbcb930ed2fc9d6a57e0babea00027a7ecc67 Mon Sep 17 00:00:00 2001 From: Julan Hsu Date: Tue, 15 Jan 2019 15:28:43 -0800 Subject: nl80211/mac80211: mesh: add mesh path change count to mpath info Expose path change count to destination in mpath info Signed-off-by: Julan Hsu Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 213a1d7c1063..426db4d8f71c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3288,8 +3288,9 @@ enum nl80211_mpath_flags { * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination + * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number - * currently defind + * currently defined * @__NL80211_MPATH_INFO_AFTER_LAST: internal use */ enum nl80211_mpath_info { @@ -3302,6 +3303,7 @@ enum nl80211_mpath_info { NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, NL80211_MPATH_INFO_DISCOVERY_RETRIES, NL80211_MPATH_INFO_HOP_COUNT, + NL80211_MPATH_INFO_PATH_CHANGE, /* keep last */ __NL80211_MPATH_INFO_AFTER_LAST, -- cgit v1.2.3 From ab4dfa20534e32e48de6b761b42d943518fb26f7 Mon Sep 17 00:00:00 2001 From: Veerendranath Jakkam Date: Wed, 19 Dec 2018 22:52:25 +0530 Subject: cfg80211: Allow drivers to advertise supported AKM suites There was no such capability advertisement from the driver and thus the current user space has to assume the driver to support all the AKMs. While that may be the case with some drivers (e.g., mac80211-based ones), there are cfg80211-based drivers that implement SME and have constraints on which AKMs can be supported (e.g., such drivers may need an update to support SAE AKM using NL80211_CMD_EXTERNAL_AUTH). Allow such drivers to advertise the exact set of supported AKMs so that user space tools can determine what network profile options should be allowed to be configured. Signed-off-by: Veerendranath Jakkam [pmsr data might be big, start a new netlink message section] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 426db4d8f71c..5f9d5cd458a1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1565,6 +1565,12 @@ enum nl80211_commands { * (a u32 with flags from &enum nl80211_wpa_versions). * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to * indicate which key management algorithm(s) to use (an array of u32). + * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, + * indicating the supported AKM suites, intended for specific drivers which + * implement SME and have constraints on which AKMs are supported and also + * the cases where an AKM support is offloaded to the driver/firmware. + * If there is no such notification from the driver, user space should + * assume the driver supports all the AKM suites. * * @NL80211_ATTR_REQ_IE: (Re)association request information elements as * sent out by the card, for ROAM and successful CONNECT events. -- cgit v1.2.3 From fe4943702c850fa07f963eaa6f1530d9d4c2da78 Mon Sep 17 00:00:00 2001 From: Srinivas Dasari Date: Wed, 23 Jan 2019 18:06:56 +0530 Subject: cfg80211: Authentication offload to user space in AP mode commit 40cbfa90218b ("cfg80211/nl80211: Optional authentication offload to userspace")' introduced authentication offload to user space by the host drivers in station mode. This commit extends the same for the AP mode too. Extend NL80211_ATTR_EXTERNAL_AUTH_SUPPORT to also claim the support of external authentication from the user space in AP mode. A new flag parameter is introduced in cfg80211_ap_settings to intend the same while "start ap". Host driver to use NL80211_CMD_FRAME interface to transmit and receive the authentication frames to / from the user space. Host driver to indicate the flag NL80211_RXMGMT_FLAG_EXTERNAL_AUTH while sending the authentication frame to the user space. This intends to the user space that the driver wishes it to process the authentication frame for certain protocols, though it had initially advertised the support for SME functionality. User space shall accordingly do the authentication and indicate its final status through the command NL80211_CMD_EXTERNAL_AUTH. Allow the command even if userspace doesn't include the attribute NL80211_ATTR_SSID for AP interface. Host driver shall continue with the association sequence and indicate the STA connection status through cfg80211_new_sta. To facilitate the host drivers in AP mode for matching the pmkid by the stations during the association, NL80211_CMD_EXTERNAL_AUTH is also enhanced to include the pmkid to drivers after the authentication. This pmkid can also be used in the STA mode to include in the association request. Also modify nl80211_external_auth to not mandate SSID in AP mode. Signed-off-by: Srinivas Dasari [remove useless nla_get_flag() usage] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5f9d5cd458a1..8b0fdb9e133b 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2266,10 +2266,10 @@ enum nl80211_commands { * &enum nl80211_external_auth_action value). This is used with the * %NL80211_CMD_EXTERNAL_AUTH request event. * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user - * space supports external authentication. This attribute shall be used - * only with %NL80211_CMD_CONNECT request. The driver may offload - * authentication processing to user space if this capability is indicated - * in NL80211_CMD_CONNECT requests from the user space. + * space supports external authentication. This attribute shall be used + * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver + * may offload authentication processing to user space if this capability + * is indicated in the respective requests from the user space. * * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. @@ -5631,9 +5631,14 @@ enum nl80211_crit_proto_id { * Used by cfg80211_rx_mgmt() * * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload + * the authentication. Exclusively defined for host drivers that + * advertises the SME functionality but would like the userspace + * to handle certain authentication algorithms (e.g. SAE). */ enum nl80211_rxmgmt_flags { NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, + NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, }; /* -- cgit v1.2.3 From 6c900360e7c0df6a4846ac97d7b548d72cd801b0 Mon Sep 17 00:00:00 2001 From: Liangwei Dong Date: Fri, 18 Jan 2019 16:54:38 +0530 Subject: nl80211: Allow set/del pmksa operations for AP Host drivers may offload authentication to the user space through the commit ("cfg80211: Authentication offload to user space in AP mode"). This interface can be used to implement SAE by having the userspace do authentication/PMKID key derivation and driver handle the association. A step ahead, this interface can get further optimized if the PMKID is passed to the host driver and also have it respond to the association request by the STA on a valid PMKID. This commit enables the userspace to pass the PMKID to the host drivers through the set/del pmksa operations in AP mode. Set/Del pmksa is now restricted to STA/P2P client mode only and thus the drivers might not expect them in any other(AP) mode. This commit also introduces a feature flag NL80211_EXT_FEATURE_AP_PMKSA_CACHING (johannes: renamed) to maintain the backward compatibility of such an expectation by the host drivers. These operations are allowed in AP mode only when the drivers advertize the capability through this flag. Signed-off-by: Liangwei Dong Signed-off-by: Srinivas Dasari [rename flag to NL80211_EXT_FEATURE_AP_PMKSA_CACHING] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 8b0fdb9e133b..dd4f86ee286e 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5340,6 +5340,9 @@ enum nl80211_feature_flags { * fairness for transmitted packets and has enabled airtime fairness * scheduling. * + * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching + * (set/del PMKSA operations) in AP mode. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5380,6 +5383,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, + NL80211_EXT_FEATURE_AP_PMKSA_CACHING, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3