From dc090de854b9d7fdbc6f4df70bd7fc1b43eeccf8 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Thu, 21 Jan 2021 21:40:36 +0100 Subject: net: mrp: fix definitions of MRP test packets Wireshark says that the MRP test packets cannot be decoded - and the reason for that is that there's a two-byte hole filled with garbage between the "transitions" and "timestamp" members. So Wireshark decodes the two garbage bytes and the top two bytes of the timestamp written by the kernel as the timestamp value (which thus fluctuates wildly), and interprets the lower two bytes of the timestamp as a new (type, length) pair, which is of course broken. Even though this makes the timestamp field in the struct unaligned, it actually makes it end up on a 32 bit boundary in the frame as mandated by the standard, since it is preceded by a two byte TLV header. The struct definitions live under include/uapi/, but they are not really part of any kernel<->userspace API/ABI, so fixing the definitions by adding the packed attribute should not cause any compatibility issues. Signed-off-by: Rasmus Villemoes Reviewed-by: Horatiu Vultur Signed-off-by: Jakub Kicinski --- include/uapi/linux/mrp_bridge.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h index 9744773de5ff..5ce771327e32 100644 --- a/include/uapi/linux/mrp_bridge.h +++ b/include/uapi/linux/mrp_bridge.h @@ -97,7 +97,7 @@ struct br_mrp_ring_test_hdr { __be16 state; __be16 transitions; __be32 timestamp; -}; +} __attribute__((__packed__)); struct br_mrp_ring_topo_hdr { __be16 prio; @@ -142,7 +142,7 @@ struct br_mrp_in_test_hdr { __be16 state; __be16 transitions; __be32 timestamp; -}; +} __attribute__((__packed__)); struct br_mrp_in_topo_hdr { __u8 sa[ETH_ALEN]; -- cgit v1.2.3 From 6781939054a1a161e06e7a7955a4846be770a711 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Thu, 21 Jan 2021 21:40:37 +0100 Subject: net: mrp: move struct definitions out of uapi None of these are actually used in the kernel/userspace interface - there's a userspace component of implementing MRP, and userspace will need to construct certain frames to put on the wire, but there's no reason the kernel should provide the relevant definitions in a UAPI header. In fact, some of those definitions were broken until previous commit, so only keep the few that are actually referenced in the kernel code, and move them to the br_private_mrp.h header. Signed-off-by: Rasmus Villemoes Signed-off-by: Jakub Kicinski --- include/uapi/linux/mrp_bridge.h | 86 ----------------------------------------- 1 file changed, 86 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h index 5ce771327e32..bd4424de56ff 100644 --- a/include/uapi/linux/mrp_bridge.h +++ b/include/uapi/linux/mrp_bridge.h @@ -71,90 +71,4 @@ enum br_mrp_sub_tlv_header_type { BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR = 0x3, }; -struct br_mrp_tlv_hdr { - __u8 type; - __u8 length; -}; - -struct br_mrp_sub_tlv_hdr { - __u8 type; - __u8 length; -}; - -struct br_mrp_end_hdr { - struct br_mrp_tlv_hdr hdr; -}; - -struct br_mrp_common_hdr { - __be16 seq_id; - __u8 domain[MRP_DOMAIN_UUID_LENGTH]; -}; - -struct br_mrp_ring_test_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 state; - __be16 transitions; - __be32 timestamp; -} __attribute__((__packed__)); - -struct br_mrp_ring_topo_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 interval; -}; - -struct br_mrp_ring_link_hdr { - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 interval; - __be16 blocked; -}; - -struct br_mrp_sub_opt_hdr { - __u8 type; - __u8 manufacture_data[MRP_MANUFACTURE_DATA_LENGTH]; -}; - -struct br_mrp_test_mgr_nack_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 other_prio; - __u8 other_sa[ETH_ALEN]; -}; - -struct br_mrp_test_prop_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 other_prio; - __u8 other_sa[ETH_ALEN]; -}; - -struct br_mrp_oui_hdr { - __u8 oui[MRP_OUI_LENGTH]; -}; - -struct br_mrp_in_test_hdr { - __be16 id; - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 state; - __be16 transitions; - __be32 timestamp; -} __attribute__((__packed__)); - -struct br_mrp_in_topo_hdr { - __u8 sa[ETH_ALEN]; - __be16 id; - __be16 interval; -}; - -struct br_mrp_in_link_hdr { - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 id; - __be16 interval; -}; - #endif -- cgit v1.2.3 From 07d46d93c9acdfe0614071d73c415dd5f745cc6e Mon Sep 17 00:00:00 2001 From: Justin Iurman Date: Thu, 21 Jan 2021 23:00:44 +0100 Subject: uapi: fix big endian definition of ipv6_rpl_sr_hdr Following RFC 6554 [1], the current order of fields is wrong for big endian definition. Indeed, here is how the header looks like: +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ This patch reorders fields so that big endian definition is now correct. [1] https://tools.ietf.org/html/rfc6554#section-3 Fixes: cfa933d938d8 ("include: uapi: linux: add rpl sr header definition") Signed-off-by: Justin Iurman Signed-off-by: Jakub Kicinski --- include/uapi/linux/rpl.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rpl.h b/include/uapi/linux/rpl.h index 1dccb55cf8c6..708adddf9f13 100644 --- a/include/uapi/linux/rpl.h +++ b/include/uapi/linux/rpl.h @@ -28,10 +28,10 @@ struct ipv6_rpl_sr_hdr { pad:4, reserved1:16; #elif defined(__BIG_ENDIAN_BITFIELD) - __u32 reserved:20, + __u32 cmpri:4, + cmpre:4, pad:4, - cmpri:4, - cmpre:4; + reserved:20; #else #error "Please fix " #endif -- cgit v1.2.3 From a53e3c189cc6460b60e152af3fc24edf8e0ea9d2 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 18 Jan 2021 16:37:00 +0100 Subject: media: v4l2-subdev.h: BIT() is not available in userspace The BIT macro is not available in userspace, so replace BIT(0) by 0x00000001. Signed-off-by: Hans Verkuil Fixes: 6446ec6cbf46 ("media: v4l2-subdev: add VIDIOC_SUBDEV_QUERYCAP ioctl") Cc: Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-subdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index 00850b98078a..a38454d9e0f5 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -176,7 +176,7 @@ struct v4l2_subdev_capability { }; /* The v4l2 sub-device video device node is registered in read-only mode. */ -#define V4L2_SUBDEV_CAP_RO_SUBDEV BIT(0) +#define V4L2_SUBDEV_CAP_RO_SUBDEV 0x00000001 /* Backwards compatibility define --- to be removed */ #define v4l2_subdev_edid v4l2_edid -- cgit v1.2.3 From 31f190e0ccac8b75d33fdc95a797c526cf9b149e Mon Sep 17 00:00:00 2001 From: Dafna Hirschfeld Date: Thu, 21 Jan 2021 15:44:02 +0100 Subject: media: rkisp1: uapi: change hist_bins array type from __u16 to __u32 Each entry in the array is a 20 bits value composed of 16 bits unsigned integer and 4 bits fractional part. So the type should change to __u32. In addition add a documentation of how the measurements are done. Signed-off-by: Dafna Hirschfeld Acked-by: Helen Koike Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/rkisp1-config.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index 6e449e784260..24f05d6d258f 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -844,13 +844,18 @@ struct rkisp1_cif_isp_af_stat { /** * struct rkisp1_cif_isp_hist_stat - statistics histogram data * - * @hist_bins: measured bin counters + * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point + * type. Bits 0-4 are the fractional part and bits 5-19 are the + * integer part. * - * Measurement window divided into 25 sub-windows, set - * with ISP_HIST_XXX + * The window of the measurements area is divided to 5x5 sub-windows. The + * histogram is then computed for each sub-window independently and the final + * result is a weighted average of the histogram measurements on all + * sub-windows. The window of the measurements area and the weight of each + * sub-window are configurable using struct @rkisp1_cif_isp_hst_config. */ struct rkisp1_cif_isp_hist_stat { - __u16 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX]; + __u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX]; }; /** -- cgit v1.2.3 From 66d81de7ea9d2b0775e5bfd5e770483a1c24b9ca Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 21 Jan 2021 15:44:05 +0100 Subject: media: rockchip: rkisp1: reduce number of histogram grid elements in uapi The uapi right now specifies an array size of 28 but the actual number of elements is only 25 with the last 3 being unused. Reduce the array size to the correct number of elements and change the params code to iterate the array 25 times. Signed-off-by: Heiko Stuebner Signed-off-by: Dafna Hirschfeld Acked-by: Helen Koike Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/rkisp1-config.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index 24f05d6d258f..35aa82d5f6dd 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -102,8 +102,7 @@ /* * Histogram calculation */ -/* Last 3 values unused. */ -#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE 28 +#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE 25 /* * Defect Pixel Cluster Correction -- cgit v1.2.3 From fc672d806bd77eff26117479e90ccdcfd2a8ecb4 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 21 Jan 2021 15:44:06 +0100 Subject: media: rockchip: rkisp1: carry ip version information The IP block evolved from its rk3288/rk3399 base and the vendor designates them with a numerical version. rk3399 for example is designated V10 probably meaning V1.0. There doesn't seem to be an actual version register we could read that information from, so allow the match_data to carry that information for future differentiation. Also carry that information in the hw_revision field of the media- controller API, so that userspace also has access to that. The added versions are: - V10: at least rk3288 + rk3399 - V11: seemingly unused as of now, but probably appeared in some soc - V12: at least rk3326 + px30 - V13: at least rk1808 [fix checkpatch warning don't use multiple blank lines] Signed-off-by: Heiko Stuebner Signed-off-by: Dafna Hirschfeld Reviewed-by: Ezequiel Garcia Acked-by: Helen Koike Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/rkisp1-config.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index 35aa82d5f6dd..bee4413fe0d3 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -123,6 +123,21 @@ #define RKISP1_CIF_ISP_STAT_AFM (1U << 2) #define RKISP1_CIF_ISP_STAT_HIST (1U << 3) +/** + * enum rkisp1_cif_isp_version - ISP variants + * + * @RKISP1_V10: used at least in rk3288 and rk3399 + * @RKISP1_V11: declared in the original vendor code, but not used + * @RKISP1_V12: used at least in rk3326 and px30 + * @RKISP1_V13: used at least in rk1808 + */ +enum rkisp1_cif_isp_version { + RKISP1_V10 = 10, + RKISP1_V11, + RKISP1_V12, + RKISP1_V13, +}; + enum rkisp1_cif_isp_histogram_mode { RKISP1_CIF_ISP_HISTOGRAM_MODE_DISABLE, RKISP1_CIF_ISP_HISTOGRAM_MODE_RGB_COMBINED, -- cgit v1.2.3 From ef357e02b6c420dc2d668ebf3165838c77358acd Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 21 Jan 2021 15:44:07 +0100 Subject: media: rockchip: rkisp1: extend uapi array sizes Later variants of the rkisp1 block use more entries in some arrays: RKISP1_CIF_ISP_AE_MEAN_MAX 25 -> 81 RKISP1_CIF_ISP_HIST_BIN_N_MAX 16 -> 32 RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES 17 -> 34 RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE 25 -> 81 and we can still extend the uapi during the 5.11-rc cycle, so do that now to be on the safe side. V10 and V11 only need the smaller sizes, while V12 and V13 needed the larger sizes. When adding the bigger sizes make sure, values filled from hardware values and transmitted to userspace don't leak kernel data by zeroing them beforehand. Signed-off-by: Heiko Stuebner Signed-off-by: Dafna Hirschfeld Reviewed-by: Ezequiel Garcia Acked-by: Helen Koike Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/rkisp1-config.h | 67 ++++++++++++++++++++++++++++++++------ 1 file changed, 57 insertions(+), 10 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index bee4413fe0d3..36e3efb81b01 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -49,8 +49,14 @@ #define RKISP1_CIF_ISP_CTK_COEFF_MAX 0x100 #define RKISP1_CIF_ISP_CTK_OFFSET_MAX 0x800 -#define RKISP1_CIF_ISP_AE_MEAN_MAX 25 -#define RKISP1_CIF_ISP_HIST_BIN_N_MAX 16 +#define RKISP1_CIF_ISP_AE_MEAN_MAX_V10 25 +#define RKISP1_CIF_ISP_AE_MEAN_MAX_V12 81 +#define RKISP1_CIF_ISP_AE_MEAN_MAX RKISP1_CIF_ISP_AE_MEAN_MAX_V12 + +#define RKISP1_CIF_ISP_HIST_BIN_N_MAX_V10 16 +#define RKISP1_CIF_ISP_HIST_BIN_N_MAX_V12 32 +#define RKISP1_CIF_ISP_HIST_BIN_N_MAX RKISP1_CIF_ISP_HIST_BIN_N_MAX_V12 + #define RKISP1_CIF_ISP_AFM_MAX_WINDOWS 3 #define RKISP1_CIF_ISP_DEGAMMA_CURVE_SIZE 17 @@ -86,7 +92,9 @@ * Gamma out */ /* Maximum number of color samples supported */ -#define RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES 17 +#define RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V10 17 +#define RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V12 34 +#define RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V12 /* * Lens shade correction @@ -102,7 +110,9 @@ /* * Histogram calculation */ -#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE 25 +#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V10 25 +#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V12 81 +#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V12 /* * Defect Pixel Cluster Correction @@ -524,6 +534,15 @@ enum rkisp1_cif_isp_goc_mode { * * @mode: goc mode (from enum rkisp1_cif_isp_goc_mode) * @gamma_y: gamma out curve y-axis for all color components + * + * The number of entries of @gamma_y depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V10 + * entries, versions >= V12 have RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V12 + * entries. RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES is equal to the maximum + * of the two. */ struct rkisp1_cif_isp_goc_config { __u32 mode; @@ -538,6 +557,15 @@ struct rkisp1_cif_isp_goc_config { * skipped * @meas_window: coordinates of the measure window * @hist_weight: weighting factor for sub-windows + * + * The number of entries of @hist_weight depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V10 + * entries, versions >= V12 have RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V12 + * entries. RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE is equal to the maximum + * of the two. */ struct rkisp1_cif_isp_hst_config { __u32 mode; @@ -825,7 +853,15 @@ struct rkisp1_cif_isp_bls_meas_val { * @exp_mean: Mean luminance value of block xx * @bls_val: BLS measured values * - * Image is divided into 5x5 blocks. + * The number of entries of @exp_mean depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_AE_MEAN_MAX_V10 entries, + * versions >= V12 have RKISP1_CIF_ISP_AE_MEAN_MAX_V12 entries. + * RKISP1_CIF_ISP_AE_MEAN_MAX is equal to the maximum of the two. + * + * Image is divided into 5x5 blocks on V10 and 9x9 blocks on V12. */ struct rkisp1_cif_isp_ae_stat { __u8 exp_mean[RKISP1_CIF_ISP_AE_MEAN_MAX]; @@ -862,11 +898,22 @@ struct rkisp1_cif_isp_af_stat { * type. Bits 0-4 are the fractional part and bits 5-19 are the * integer part. * - * The window of the measurements area is divided to 5x5 sub-windows. The - * histogram is then computed for each sub-window independently and the final - * result is a weighted average of the histogram measurements on all - * sub-windows. The window of the measurements area and the weight of each - * sub-window are configurable using struct @rkisp1_cif_isp_hst_config. + * The window of the measurements area is divided to 5x5 sub-windows for + * V10/V11 and to 9x9 sub-windows for V12. The histogram is then computed for + * each sub-window independently and the final result is a weighted average of + * the histogram measurements on all sub-windows. The window of the + * measurements area and the weight of each sub-window are configurable using + * struct @rkisp1_cif_isp_hst_config. + * + * The histogram contains 16 bins in V10/V11 and 32 bins in V12/V13. + * + * The number of entries of @hist_bins depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_HIST_BIN_N_MAX_V10 entries, + * versions >= V12 have RKISP1_CIF_ISP_HIST_BIN_N_MAX_V12 entries. + * RKISP1_CIF_ISP_HIST_BIN_N_MAX is equal to the maximum of the two. */ struct rkisp1_cif_isp_hist_stat { __u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX]; -- cgit v1.2.3 From 36a6c843fd0d8e02506681577e96dabd203dd8e8 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Fri, 5 Feb 2021 13:43:21 -0500 Subject: entry: Use different define for selector variable in SUD Michael Kerrisk suggested that, from an API perspective, it is a bad idea to share the PR_SYS_DISPATCH_ defines between the prctl operation and the selector variable. Therefore, define two new constants to be used by SUD's selector variable and update the corresponding documentation and test cases. While this changes the API syscall user dispatch has never been part of a Linux release, it will show up for the first time in 5.11. Suggested-by: Michael Kerrisk (man-pages) Signed-off-by: Gabriel Krisman Bertazi Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com --- include/uapi/linux/prctl.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 90deb41c8a34..667f1aed091c 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -251,5 +251,8 @@ struct prctl_mm_map { #define PR_SET_SYSCALL_USER_DISPATCH 59 # define PR_SYS_DISPATCH_OFF 0 # define PR_SYS_DISPATCH_ON 1 +/* The control values for the user space selector when dispatch is enabled */ +# define SYSCALL_DISPATCH_FILTER_ALLOW 0 +# define SYSCALL_DISPATCH_FILTER_BLOCK 1 #endif /* _LINUX_PRCTL_H */ -- cgit v1.2.3