From f8bacc210408f7a2a182f184a9fa1475b8a67440 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 23:27:01 +0100 Subject: cfg80211: clean up mesh plink station change API Make the ability to leave the plink_state unchanged not use a magic -1 variable that isn't in the enum, but an explicit change flag; reject invalid plink states or actions and move the needed constants for plink actions to the right header file. Also reject plink_state changes for non-mesh interfaces. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c46bb016f4e4..7dcc69f73d2c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -884,7 +884,8 @@ enum nl80211_commands { * consisting of a nested array. * * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). - * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link + * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path * info given for %NL80211_CMD_GET_MPATH, nested attribute described at @@ -3307,6 +3308,23 @@ enum nl80211_plink_state { MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 }; +/** + * enum nl80211_plink_action - actions to perform in mesh peers + * + * @NL80211_PLINK_ACTION_NO_ACTION: perform no action + * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment + * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer + * @NUM_NL80211_PLINK_ACTIONS: number of possible actions + */ +enum plink_actions { + NL80211_PLINK_ACTION_NO_ACTION, + NL80211_PLINK_ACTION_OPEN, + NL80211_PLINK_ACTION_BLOCK, + + NUM_NL80211_PLINK_ACTIONS, +}; + + #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 #define NL80211_REPLAY_CTR_LEN 8 -- cgit v1.2.3 From 77ee7c891a04c3d254711ddf1bde5d7381339fb3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 00:48:33 +0100 Subject: cfg80211: comprehensively check station changes The station change API isn't being checked properly before drivers are called, and as a result it is difficult to see what should be allowed and what not. In order to comprehensively check the API parameters parse everything first, and then have the driver call a function (cfg80211_check_station_change()) with the additionally information about the kind of station that is being changed; this allows the function to make better decisions than the old code could. While at it, also add a few checks, particularly in mesh and clarify the TDLS station lifetime in documentation. To be able to reduce a few checks, ignore any flag set bits when the mask isn't set, they shouldn't be applied then. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7dcc69f73d2c..523ed3d65b41 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -36,7 +36,21 @@ * The station is still assumed to belong to the AP interface it was added * to. * - * TODO: need more info? + * Station handling varies per interface type and depending on the driver's + * capabilities. + * + * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS + * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: + * - a setup station entry is added, not yet authorized, without any rate + * or capability information, this just exists to avoid race conditions + * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid + * to add rate and capability information to the station and at the same + * time mark it authorized. + * - %NL80211_TDLS_ENABLE_LINK is then used + * - after this, the only valid operation is to remove it by tearing down + * the TDLS link (%NL80211_TDLS_DISABLE_LINK) + * + * TODO: need more info for other interface types */ /** -- cgit v1.2.3 From 3713b4e364effef4b170c97d54528b1cdb16aa6b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 16:19:38 +0100 Subject: nl80211: allow splitting wiphy information in dumps The per-wiphy information is getting large, to the point where with more than the typical number of channels it's too large and overflows, and userspace can't get any of the information at all. To address this (in a way that doesn't require making all messages bigger) allow userspace to specify that it can deal with wiphy information split across multiple parts of the dump, and if it can split up the data. This also splits up each channel separately so an arbitrary number of channels can be supported. Additionally, since GET_WIPHY has the same problem, add support for filtering the wiphy dump and get information for a single wiphy only, this allows userspace apps to use dump in this case to retrieve all data from a single device. As userspace needs to know if all this this is supported, add a global nl80211 feature set and include a bit for this behaviour in it. Cc: Dennis H Jensen Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 523ed3d65b41..9844c10a2999 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -625,6 +625,10 @@ * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the * event. * + * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, + * i.e. features for the nl80211 protocol rather than device features. + * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -779,6 +783,8 @@ enum nl80211_commands { NL80211_CMD_RADAR_DETECT, + NL80211_CMD_GET_PROTOCOL_FEATURES, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1383,6 +1389,13 @@ enum nl80211_commands { * advertised to the driver, e.g., to enable TDLS off channel operations * and PU-APSD. * + * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see + * &enum nl80211_protocol_features, the attribute is a u32. + * + * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports + * receiving the data for a single wiphy split across multiple + * messages, given with wiphy dump message + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1669,6 +1682,9 @@ enum nl80211_attrs { NL80211_ATTR_STA_CAPABILITY, NL80211_ATTR_STA_EXT_CAPABILITY, + NL80211_ATTR_PROTOCOL_FEATURES, + NL80211_ATTR_SPLIT_WIPHY_DUMP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3619,4 +3635,16 @@ enum nl80211_dfs_state { NL80211_DFS_AVAILABLE, }; +/** + * enum enum nl80211_protocol_features - nl80211 protocol features + * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting + * wiphy dumps (if requested by the application with the attribute + * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the + * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or + * %NL80211_ATTR_WDEV. + */ +enum nl80211_protocol_features { + NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From ee2aca343c9aa64d277a75a5df043299dc84cfd9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 21 Feb 2013 17:36:01 +0100 Subject: cfg80211: add ability to override VHT capabilities For testing it's sometimes useful to be able to override certain VHT capability advertisement, add the ability to do that in cfg80211. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9844c10a2999..2c3e88360037 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1685,6 +1685,9 @@ enum nl80211_attrs { NL80211_ATTR_PROTOCOL_FEATURES, NL80211_ATTR_SPLIT_WIPHY_DUMP, + NL80211_ATTR_DISABLE_VHT, + NL80211_ATTR_VHT_CAPABILITY_MASK, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 355199e02b831fd4f652c34d6c7673d973da1369 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 27 Feb 2013 17:14:27 +0200 Subject: cfg80211: Extend support for IEEE 802.11r Fast BSS Transition Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the WLAN driver and NL80211_CMD_FT_EVENT to send FT events from the WLAN driver. This will carry the target AP's MAC address along with the relevant Information Elements. This event is used to report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). These changes allow FT to be supported with drivers that use an internal SME instead of user space option (like FT implementation in wpa_supplicant with mac80211-based drivers). Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 2c3e88360037..2d0cff57ff89 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -629,6 +629,14 @@ * i.e. features for the nl80211 protocol rather than device features. * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. * + * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition + * Information Element to the WLAN driver + * + * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver + * to the supplicant. This will carry the target AP's MAC address along + * with the relevant Information Elements. This event is used to report + * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -785,6 +793,9 @@ enum nl80211_commands { NL80211_CMD_GET_PROTOCOL_FEATURES, + NL80211_CMD_UPDATE_FT_IES, + NL80211_CMD_FT_EVENT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1396,6 +1407,11 @@ enum nl80211_commands { * receiving the data for a single wiphy split across multiple * messages, given with wiphy dump message * + * @NL80211_ATTR_MDID: Mobility Domain Identifier + * + * @NL80211_ATTR_IE_RIC: Resource Information Container Information + * Element + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1688,6 +1704,9 @@ enum nl80211_attrs { NL80211_ATTR_DISABLE_VHT, NL80211_ATTR_VHT_CAPABILITY_MASK, + NL80211_ATTR_MDID, + NL80211_ATTR_IE_RIC, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From bb2798d45fc0575f5d08c0bb7baf4d5d5e8cc0c3 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 4 Mar 2013 13:06:10 -0800 Subject: nl80211: explicit userspace MPM Secure mesh had the implicit requirement that the Mesh Peering Management entity be in userspace. However userspace might want to implement an open MPM as well, so specify a mesh setup parameter to indicate this. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 2d0cff57ff89..8134c6a96f57 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -513,9 +513,11 @@ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a * beacon or probe response from a compatible mesh peer. This is only * sent while no station information (sta_info) exists for the new peer - * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On - * reception of this notification, userspace may decide to create a new - * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, + * @NL80211_MESH_SETUP_USERSPACE_AMPE, or + * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this + * notification, userspace may decide to create a new station + * (@NL80211_CMD_NEW_STATION). To stop this notification from * reoccurring, the userspace authentication daemon may want to create the * new station with the AUTHENTICATED flag unset and maybe change it later * depending on the authentication result. @@ -1199,10 +1201,10 @@ enum nl80211_commands { * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver * allows auth frames in a mesh to be passed to userspace for processing via * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. - * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as - * defined in &enum nl80211_plink_state. Used when userspace is - * driving the peer link management state machine. - * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in + * &enum nl80211_plink_state. Used when userspace is driving the peer link + * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or + * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. * * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy * capabilities, the supported WoWLAN triggers @@ -2612,6 +2614,9 @@ enum nl80211_meshconf_params { * vendor specific synchronization method or disable it to use the default * neighbor offset synchronization * + * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will + * implement an MPM which handles peer allocation and state. + * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use @@ -2624,6 +2629,7 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_USERSPACE_AUTH, NL80211_MESH_SETUP_USERSPACE_AMPE, NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, + NL80211_MESH_SETUP_USERSPACE_MPM, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -3526,6 +3532,10 @@ enum nl80211_ap_sme_features { * stations the authenticated/associated bits have to be set in the mask. * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits * (HT40, VHT 80/160 MHz) if this flag is set + * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh + * Peering Management entity which may be implemented by registering for + * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is + * still generated by the driver. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3544,6 +3554,7 @@ enum nl80211_feature_flags { /* bit 13 is reserved */ NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, + NL80211_FEATURE_USERSPACE_MPM = 1 << 16, }; /** -- cgit v1.2.3 From d37bb18ae3a3fa7ef239aad533742a8b07eae15f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 4 Mar 2013 13:06:13 -0800 Subject: nl80211: user_mpm overrides auto_open_plinks If the user requested a userspace MPM, automatically disable auto_open_plinks to fully disable the kernel MPM. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 8134c6a96f57..79da8710448e 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2467,8 +2467,10 @@ enum nl80211_mesh_power_mode { * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh * point. * - * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open + * peer links when we detect compatible mesh peers. Disabled if + * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are + * set. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames * containing a PREQ that an MP can send to a particular destination (path -- cgit v1.2.3 From 26fd76cab2e61cedc5c25f7151fb31b57ddc53c7 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 22 Feb 2013 10:53:25 +0100 Subject: NFC: llcp: Implement socket options Some LLCP services (e.g. the validation ones) require some control over the LLCP link parameters like the receive window (RW) or the MIU extension (MIUX). This can only be done through socket options. Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 7969f46f1bb3..855630fe731d 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -220,4 +220,8 @@ struct sockaddr_nfc_llcp { #define NFC_LLCP_DIRECTION_RX 0x00 #define NFC_LLCP_DIRECTION_TX 0x01 +/* socket option names */ +#define NFC_LLCP_RW 0 +#define NFC_LLCP_MIUX 1 + #endif /*__LINUX_NFC_H */ -- cgit v1.2.3 From d9b8d8e19b073096d3609bbd60f82148d128b555 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Fri, 15 Feb 2013 10:43:06 +0100 Subject: NFC: llcp: Service Name Lookup netlink interface This adds a netlink interface for service name lookup support. Multiple URIs can be passed nested into the NFC_ATTR_LLC_SDP attribute using the NFC_CMD_LLC_SDREQ netlink command. When the SNL reply is received, a NFC_EVENT_LLC_SDRES event is sent to the user space. URI and SAP tuples are passed back, nested into NFC_ATTR_LLC_SDP attribute. Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 855630fe731d..7440bc81a04b 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -90,6 +90,8 @@ enum nfc_commands { NFC_CMD_LLC_SET_PARAMS, NFC_CMD_ENABLE_SE, NFC_CMD_DISABLE_SE, + NFC_CMD_LLC_SDREQ, + NFC_EVENT_LLC_SDRES, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -140,11 +142,21 @@ enum nfc_attrs { NFC_ATTR_LLC_PARAM_RW, NFC_ATTR_LLC_PARAM_MIUX, NFC_ATTR_SE, + NFC_ATTR_LLC_SDP, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; #define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1) +enum nfc_sdp_attr { + NFC_SDP_ATTR_UNSPEC, + NFC_SDP_ATTR_URI, + NFC_SDP_ATTR_SAP, +/* private: internal use only */ + __NFC_SDP_ATTR_AFTER_LAST +}; +#define NFC_SDP_ATTR_MAX (__NFC_SDP_ATTR_AFTER_LAST - 1) + #define NFC_DEVICE_NAME_MAXSIZE 8 #define NFC_NFCID1_MAXSIZE 10 #define NFC_SENSB_RES_MAXSIZE 12 -- cgit v1.2.3