From c196f6ee61e42df9acec797ab41a0c8d87e8aa2e Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Thu, 18 Oct 2012 07:54:59 -0300 Subject: [media] media: add new mediabus format enums for dm365 add new enum entries for supporting the media-bus formats on dm365. These include some bayer and some non-bayer formats. V4L2_MBUS_FMT_YDYUYDYV8_1X16 and V4L2_MBUS_FMT_UV8_1X8 are used internal to the hardware by the resizer. V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 represents the bayer ALAW format that is supported by dm365 hardware. Signed-off-by: Manjunath Hadli Signed-off-by: Lad, Prabhakar Acked-by: Sakari Ailus Acked-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-mediabus.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 7d64e0e1a18b..e860f55820ec 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -47,8 +47,9 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - /* YUV (including grey) - next is 0x2014 */ + /* YUV (including grey) - next is 0x2016 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, + V4L2_MBUS_FMT_UV8_1X8 = 0x2015, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003, V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004, @@ -65,14 +66,19 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010, V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011, V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012, + V4L2_MBUS_FMT_YDYUYDYV8_1X16 = 0x2014, V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, - /* Bayer - next is 0x3015 */ + /* Bayer - next is 0x3019 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013, V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002, V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014, + V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 = 0x3015, + V4L2_MBUS_FMT_SGBRG10_ALAW8_1X8 = 0x3016, + V4L2_MBUS_FMT_SGRBG10_ALAW8_1X8 = 0x3017, + V4L2_MBUS_FMT_SRGGB10_ALAW8_1X8 = 0x3018, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009, -- cgit v1.2.3 From 05ad6fc1d54f106d5b8c598e2f9b59b12f3fb476 Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Thu, 18 Oct 2012 07:58:02 -0300 Subject: [media] v4l2: add new pixel formats supported on dm365 add new macro V4L2_PIX_FMT_SGRBG10ALAW8 and associated formats to represent Bayer format frames compressed by A-LAW algorithm, add V4L2_PIX_FMT_UV8 to represent storage of CbCr data (UV interleaved) only. Signed-off-by: Manjunath Hadli Signed-off-by: Lad, Prabhakar Acked-by: Sakari Ailus Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/videodev2.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi') diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 3cf3e946e331..39d2cecdf38c 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -334,6 +334,9 @@ struct v4l2_pix_format { /* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ +/* Chrominance formats */ +#define V4L2_PIX_FMT_UV8 v4l2_fourcc('U', 'V', '8', ' ') /* 8 UV 4:4 */ + /* Luminance+Chrominance formats */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ @@ -386,6 +389,11 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ + /* 10bit raw bayer a-law compressed to 8 bits */ +#define V4L2_PIX_FMT_SBGGR10ALAW8 v4l2_fourcc('a', 'B', 'A', '8') +#define V4L2_PIX_FMT_SGBRG10ALAW8 v4l2_fourcc('a', 'G', 'A', '8') +#define V4L2_PIX_FMT_SGRBG10ALAW8 v4l2_fourcc('a', 'g', 'A', '8') +#define V4L2_PIX_FMT_SRGGB10ALAW8 v4l2_fourcc('a', 'R', 'A', '8') /* 10bit raw bayer DPCM compressed to 8 bits */ #define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8') #define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8') -- cgit v1.2.3 From 1202ecdc24fc88d5b144824f55ec9c8899591caf Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 21 Oct 2012 16:02:47 -0300 Subject: [media] v4l: Define video buffer flags for timestamp types Define video buffer flags for different timestamp types. Everything up to now have used either realtime clock or monotonic clock, without a way to tell which clock the timestamp was taken from. Also document that the clock source of the timestamp in the timestamp field depends on buffer flags. [mchehab@redhat.com: fix a few wrong references to Kernel 3.8 - as this patch is meant for 3.9] Signed-off-by: Sakari Ailus Acked-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/videodev2.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi') diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 39d2cecdf38c..94cbe26e9f00 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -701,6 +701,10 @@ struct v4l2_buffer { /* Cache handling flags */ #define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 #define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 +/* Timestamp type */ +#define V4L2_BUF_FLAG_TIMESTAMP_MASK 0xe000 +#define V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN 0x0000 +#define V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC 0x2000 /** * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor -- cgit v1.2.3 From b01189b85b7653a51ebe851fc4d70702cebfed3c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 28 Nov 2012 14:40:32 -0300 Subject: [media] V4L: DocBook: Add V4L2_MBUS_FMT_YUV10_1X30 media bus pixel code This patch adds definition of media bus code for YUV pixel format transferred in 30-bit samples where each component has 10 bits width. [mchehab@redhat.com: fix a merge conflict at v4l2-mediabus.h] Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-mediabus.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index e860f55820ec..b9b7bea04537 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -47,7 +47,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - /* YUV (including grey) - next is 0x2016 */ + /* YUV (including grey) - next is 0x2017 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, V4L2_MBUS_FMT_UV8_1X8 = 0x2015, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, @@ -69,6 +69,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_YDYUYDYV8_1X16 = 0x2014, V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, + V4L2_MBUS_FMT_YUV10_1X30 = 0x2016, /* Bayer - next is 0x3019 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, -- cgit v1.2.3 From 24b9f50170f55a3179c6f6d51022eb7d50502d05 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 3 Jan 2013 12:30:30 -0300 Subject: [media] V4L: Remove deprecated image centering controls It has been over 3 years since the V4L2_CID_[HV]CENTER were deprecated. Clean up the DocBook and remove the V4L2_CID_VCENTER_DEPRECATED, V4L2_CID_VCENTER_DEPRECATED control related paragraphs. Remove the V4L2_CID_[HV]CENTER controls definitions from v4l2-controls.h, these controls are not used by any driver in the mainline now. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-controls.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index f56c945cecd4..4dc0822700fe 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -88,10 +88,6 @@ #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) - #define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) enum v4l2_power_line_frequency { V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, -- cgit v1.2.3 From 9569793a79836320c33d400c686dcb78f886bdad Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 Jan 2013 12:22:06 -0300 Subject: [media] dvb: Add DVBv5 statistics properties The DVBv3 statistics parameters are limited on several ways: - It doesn't provide any way to indicate the used measure, so userspace need to guess how to calculate/use it; - Only a limited set of stats are supported; - Can't be called in a way to require them to be filled all at once (atomic reads from the hardware), with may cause troubles on interpreting them on userspace; - On some OFDM delivery systems, the carriers can be independently modulated, having different properties. Currently, there's no way to report per-layer stats. To address the above issues, adding a new DVBv5-based stats API. While here, correct inner code nomenclature on a few places. Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/dvb/frontend.h | 79 ++++++++++++++++++++++++++++++++++++++- include/uapi/linux/dvb/version.h | 2 +- 2 files changed, 79 insertions(+), 2 deletions(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index c12d452cb40d..c56d77c496a5 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -365,7 +365,17 @@ struct dvb_frontend_event { #define DTV_INTERLEAVING 60 #define DTV_LNA 61 -#define DTV_MAX_COMMAND DTV_LNA +/* Quality parameters */ +#define DTV_STAT_SIGNAL_STRENGTH 62 +#define DTV_STAT_CNR 63 +#define DTV_STAT_PRE_ERROR_BIT_COUNT 64 +#define DTV_STAT_PRE_TOTAL_BIT_COUNT 65 +#define DTV_STAT_POST_ERROR_BIT_COUNT 66 +#define DTV_STAT_POST_TOTAL_BIT_COUNT 67 +#define DTV_STAT_ERROR_BLOCK_COUNT 68 +#define DTV_STAT_TOTAL_BLOCK_COUNT 69 + +#define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT typedef enum fe_pilot { PILOT_ON, @@ -452,11 +462,78 @@ struct dtv_cmds_h { __u32 reserved:30; /* Align */ }; +/** + * Scale types for the quality parameters. + * @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That + * could indicate a temporary or a permanent + * condition. + * @FE_SCALE_DECIBEL: The scale is measured in 0.0001 dB steps, typically + * used on signal measures. + * @FE_SCALE_RELATIVE: The scale is a relative percentual measure, + * ranging from 0 (0%) to 0xffff (100%). + * @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like + * bit error, block error, lapsed time. + */ +enum fecap_scale_params { + FE_SCALE_NOT_AVAILABLE = 0, + FE_SCALE_DECIBEL, + FE_SCALE_RELATIVE, + FE_SCALE_COUNTER +}; + +/** + * struct dtv_stats - Used for reading a DTV status property + * + * @value: value of the measure. Should range from 0 to 0xffff; + * @scale: Filled with enum fecap_scale_params - the scale + * in usage for that parameter + * + * For most delivery systems, this will return a single value for each + * parameter. + * It should be noticed, however, that new OFDM delivery systems like + * ISDB can use different modulation types for each group of carriers. + * On such standards, up to 8 groups of statistics can be provided, one + * for each carrier group (called "layer" on ISDB). + * In order to be consistent with other delivery systems, the first + * value refers to the entire set of carriers ("global"). + * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when + * the value for the entire group of carriers or from one specific layer + * is not provided by the hardware. + * st.len should be filled with the latest filled status + 1. + * + * In other words, for ISDB, those values should be filled like: + * u.st.stat.svalue[0] = global statistics; + * u.st.stat.scale[0] = FE_SCALE_DECIBELS; + * u.st.stat.value[1] = layer A statistics; + * u.st.stat.scale[1] = FE_SCALE_NOT_AVAILABLE (if not available); + * u.st.stat.svalue[2] = layer B statistics; + * u.st.stat.scale[2] = FE_SCALE_DECIBELS; + * u.st.stat.svalue[3] = layer C statistics; + * u.st.stat.scale[3] = FE_SCALE_DECIBELS; + * u.st.len = 4; + */ +struct dtv_stats { + __u8 scale; /* enum fecap_scale_params type */ + union { + __u64 uvalue; /* for counters and relative scales */ + __s64 svalue; /* for 0.0001 dB measures */ + }; +} __attribute__ ((packed)); + + +#define MAX_DTV_STATS 4 + +struct dtv_fe_stats { + __u8 len; + struct dtv_stats stat[MAX_DTV_STATS]; +} __attribute__ ((packed)); + struct dtv_property { __u32 cmd; __u32 reserved[3]; union { __u32 data; + struct dtv_fe_stats st; struct { __u8 data[32]; __u32 len; diff --git a/include/uapi/linux/dvb/version.h b/include/uapi/linux/dvb/version.h index 827cce7e33e3..e53e2ad4444f 100644 --- a/include/uapi/linux/dvb/version.h +++ b/include/uapi/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 9 +#define DVB_API_VERSION_MINOR 10 #endif /*_DVBVERSION_H_*/ -- cgit v1.2.3 From 2ccbe779bcdee130ea7f1525670dc9d60318a981 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 19 Jan 2013 15:51:55 -0300 Subject: [media] v4l2-ctrl: Add helper function for the controls range update This patch adds a helper function that allows to modify range, i.e. minimum, maximum, step and default value of a v4l2 control, after the control has been created and initialized. This is helpful in situations when range of a control depends on user configurable parameters, e.g. camera sensor absolute exposure time depending on an output image resolution and frame rate. v4l2_ctrl_modify_range() function allows to modify range of an INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls. Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654. Signed-off-by: Sylwester Nawrocki Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi') diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 94cbe26e9f00..928799c2e2d9 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -1822,6 +1822,7 @@ struct v4l2_event_vsync { /* Payload for V4L2_EVENT_CTRL */ #define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) #define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) +#define V4L2_EVENT_CTRL_CH_RANGE (1 << 2) struct v4l2_event_ctrl { __u32 changes; -- cgit v1.2.3 From 28718152e0a78085297ec7705f53869e41d1ae73 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 24 Jan 2013 04:42:05 -0300 Subject: [media] Move DV-class control IDs from videodev2.h to v4l2-controls.h When the control IDs were split off from videodev2.h to v4l2-controls.h these new Digital Video controls were forgotten (the two patches may have crossed one another). Move these controls to their proper place in v4l2-controls.h. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-controls.h | 24 ++++++++++++++++++++++++ include/uapi/linux/videodev2.h | 22 ---------------------- 2 files changed, 24 insertions(+), 22 deletions(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 4dc0822700fe..0bece06792d7 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -778,6 +778,7 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) #define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) + /* Image source controls */ #define V4L2_CID_IMAGE_SOURCE_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900) #define V4L2_CID_IMAGE_SOURCE_CLASS (V4L2_CTRL_CLASS_IMAGE_SOURCE | 1) @@ -796,4 +797,27 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) #define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3) + +/* DV-class control IDs defined by V4L2 */ +#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) +#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) + +#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) +#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) +#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) +#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) +enum v4l2_dv_tx_mode { + V4L2_DV_TX_MODE_DVI_D = 0, + V4L2_DV_TX_MODE_HDMI = 1, +}; +#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) +enum v4l2_dv_rgb_range { + V4L2_DV_RGB_RANGE_AUTO = 0, + V4L2_DV_RGB_RANGE_LIMITED = 1, + V4L2_DV_RGB_RANGE_FULL = 2, +}; + +#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) +#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) + #endif diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 928799c2e2d9..234d1d870914 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -1354,28 +1354,6 @@ struct v4l2_querymenu { #define V4L2_CID_PRIVATE_BASE 0x08000000 -/* DV-class control IDs defined by V4L2 */ -#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) -#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) - -#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) -#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) -#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) -#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) -enum v4l2_dv_tx_mode { - V4L2_DV_TX_MODE_DVI_D = 0, - V4L2_DV_TX_MODE_HDMI = 1, -}; -#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) -enum v4l2_dv_rgb_range { - V4L2_DV_RGB_RANGE_AUTO = 0, - V4L2_DV_RGB_RANGE_LIMITED = 1, - V4L2_DV_RGB_RANGE_FULL = 2, -}; - -#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) -#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) - /* * T U N I N G */ -- cgit v1.2.3 From ed986d1fee77bbbb62291a1db1c7edbb00d99515 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 29 Jan 2013 07:21:02 -0300 Subject: [media] meye: convert to the control framework Convert the meye driver to the control framework. Some private controls have been replaced with standardized controls (SHARPNESS and JPEGQUAL). The AGC control looks like it can be replaced by the AUTOGAIN control, but it isn't a boolean so I do not know how to interpret it. The FRAMERATE control looks like it can be replaced by S_PARM, but again, without knowing how to interpret it I decided to leave it alone. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/meye.h | 8 +++----- include/uapi/linux/v4l2-controls.h | 5 +++++ 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/meye.h b/include/uapi/linux/meye.h index 0dd49954f746..8ff50fe9e481 100644 --- a/include/uapi/linux/meye.h +++ b/include/uapi/linux/meye.h @@ -57,10 +57,8 @@ struct meye_params { #define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int) /* V4L2 private controls */ -#define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE -#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4) +#define V4L2_CID_MEYE_AGC (V4L2_CID_USER_MEYE_BASE + 0) +#define V4L2_CID_MEYE_PICTURE (V4L2_CID_USER_MEYE_BASE + 1) +#define V4L2_CID_MEYE_FRAMERATE (V4L2_CID_USER_MEYE_BASE + 2) #endif diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 0bece06792d7..dcd63745e83a 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -140,6 +140,11 @@ enum v4l2_colorfx { /* last CID + 1 */ #define V4L2_CID_LASTP1 (V4L2_CID_BASE+43) +/* USER-class private control IDs */ + +/* The base for the meye driver controls. See linux/meye.h for the list + * of controls. We reserve 16 controls for this driver. */ +#define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000) /* MPEG-class control IDs */ -- cgit v1.2.3