From 28232a4317be7ad615f0f1b69dc8583fd580a8e3 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Sat, 20 May 2017 14:12:34 +0200 Subject: KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration We have been a little loose with our intermediate VMCR representation where we had a 'ctlr' field, but we failed to differentiate between the GICv2 GICC_CTLR and ICC_CTLR_EL1 layouts, and therefore ended up mapping the wrong bits into the individual fields of the ICH_VMCR_EL2 when emulating a GICv2 on a GICv3 system. Fix this by using explicit fields for the VMCR bits instead. Cc: Eric Auger Reported-by: wanghaibin Signed-off-by: Christoffer Dall Reviewed-by: Marc Zyngier Tested-by: Marc Zyngier --- include/linux/irqchip/arm-gic-v3.h | 4 ++++ include/linux/irqchip/arm-gic.h | 28 +++++++++++++++++++++++++--- 2 files changed, 29 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index fffb91202bc9..1fa293a37f4a 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -417,6 +417,10 @@ #define ICH_HCR_EN (1 << 0) #define ICH_HCR_UIE (1 << 1) +#define ICH_VMCR_ACK_CTL_SHIFT 2 +#define ICH_VMCR_ACK_CTL_MASK (1 << ICH_VMCR_ACK_CTL_SHIFT) +#define ICH_VMCR_FIQ_EN_SHIFT 3 +#define ICH_VMCR_FIQ_EN_MASK (1 << ICH_VMCR_FIQ_EN_SHIFT) #define ICH_VMCR_CBPR_SHIFT 4 #define ICH_VMCR_CBPR_MASK (1 << ICH_VMCR_CBPR_SHIFT) #define ICH_VMCR_EOIM_SHIFT 9 diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index dc30f3d057eb..d3453ee072fc 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -25,7 +25,18 @@ #define GICC_ENABLE 0x1 #define GICC_INT_PRI_THRESHOLD 0xf0 -#define GIC_CPU_CTRL_EOImodeNS (1 << 9) +#define GIC_CPU_CTRL_EnableGrp0_SHIFT 0 +#define GIC_CPU_CTRL_EnableGrp0 (1 << GIC_CPU_CTRL_EnableGrp0_SHIFT) +#define GIC_CPU_CTRL_EnableGrp1_SHIFT 1 +#define GIC_CPU_CTRL_EnableGrp1 (1 << GIC_CPU_CTRL_EnableGrp1_SHIFT) +#define GIC_CPU_CTRL_AckCtl_SHIFT 2 +#define GIC_CPU_CTRL_AckCtl (1 << GIC_CPU_CTRL_AckCtl_SHIFT) +#define GIC_CPU_CTRL_FIQEn_SHIFT 3 +#define GIC_CPU_CTRL_FIQEn (1 << GIC_CPU_CTRL_FIQEn_SHIFT) +#define GIC_CPU_CTRL_CBPR_SHIFT 4 +#define GIC_CPU_CTRL_CBPR (1 << GIC_CPU_CTRL_CBPR_SHIFT) +#define GIC_CPU_CTRL_EOImodeNS_SHIFT 9 +#define GIC_CPU_CTRL_EOImodeNS (1 << GIC_CPU_CTRL_EOImodeNS_SHIFT) #define GICC_IAR_INT_ID_MASK 0x3ff #define GICC_INT_SPURIOUS 1023 @@ -84,8 +95,19 @@ #define GICH_LR_EOI (1 << 19) #define GICH_LR_HW (1 << 31) -#define GICH_VMCR_CTRL_SHIFT 0 -#define GICH_VMCR_CTRL_MASK (0x21f << GICH_VMCR_CTRL_SHIFT) +#define GICH_VMCR_ENABLE_GRP0_SHIFT 0 +#define GICH_VMCR_ENABLE_GRP0_MASK (1 << GICH_VMCR_ENABLE_GRP0_SHIFT) +#define GICH_VMCR_ENABLE_GRP1_SHIFT 1 +#define GICH_VMCR_ENABLE_GRP1_MASK (1 << GICH_VMCR_ENABLE_GRP1_SHIFT) +#define GICH_VMCR_ACK_CTL_SHIFT 2 +#define GICH_VMCR_ACK_CTL_MASK (1 << GICH_VMCR_ACK_CTL_SHIFT) +#define GICH_VMCR_FIQ_EN_SHIFT 3 +#define GICH_VMCR_FIQ_EN_MASK (1 << GICH_VMCR_FIQ_EN_SHIFT) +#define GICH_VMCR_CBPR_SHIFT 4 +#define GICH_VMCR_CBPR_MASK (1 << GICH_VMCR_CBPR_SHIFT) +#define GICH_VMCR_EOI_MODE_SHIFT 9 +#define GICH_VMCR_EOI_MODE_MASK (1 << GICH_VMCR_EOI_MODE_SHIFT) + #define GICH_VMCR_PRIMASK_SHIFT 27 #define GICH_VMCR_PRIMASK_MASK (0x1f << GICH_VMCR_PRIMASK_SHIFT) #define GICH_VMCR_BINPOINT_SHIFT 21 -- cgit v1.2.3 From b8cb5a545c3dd8b975aad19ea020eabe0a888e8d Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Wed, 24 May 2017 18:24:07 -0400 Subject: ext4: fix quota charging for shared xattr blocks ext4_xattr_block_set() calls dquot_alloc_block() to charge for an xattr block when new references are made. However if dquot_initialize() hasn't been called on an inode, request for charging is effectively ignored because ext4_inode_info->i_dquot is not initialized yet. Add dquot_initialize() to call paths that lead to ext4_xattr_block_set(). Signed-off-by: Tahsin Erdogan Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara --- include/linux/quotaops.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 9c6f768b7d32..dda22f45fc1b 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -44,6 +44,7 @@ void inode_sub_rsv_space(struct inode *inode, qsize_t number); void inode_reclaim_rsv_space(struct inode *inode, qsize_t number); int dquot_initialize(struct inode *inode); +bool dquot_initialize_needed(struct inode *inode); void dquot_drop(struct inode *inode); struct dquot *dqget(struct super_block *sb, struct kqid qid); static inline struct dquot *dqgrab(struct dquot *dquot) @@ -207,6 +208,11 @@ static inline int dquot_initialize(struct inode *inode) return 0; } +static inline bool dquot_initialize_needed(struct inode *inode) +{ + return false; +} + static inline void dquot_drop(struct inode *inode) { } -- cgit v1.2.3 From 4b1c88984c8ac894c2c411570757bed7fa5f3226 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 18 May 2017 15:13:57 +0200 Subject: iommu/dma: Fix function declaration Newly added code in the ipmmu-vmsa driver showed a small mistake in a header file that can't be included by itself without CONFIG_IOMMU_DMA enabled: In file included from drivers/iommu/ipmmu-vmsa.c:13:0: include/linux/dma-iommu.h:105:94: error: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] This adds a forward declaration for 'struct device', similar to how we treat the other struct types in this case. Fixes: 3ae47292024f ("iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops") Fixes: 273df9635385 ("iommu/dma: Make PCI window reservation generic") Signed-off-by: Arnd Bergmann Acked-by: Robin Murphy Signed-off-by: Joerg Roedel --- include/linux/dma-iommu.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/dma-iommu.h b/include/linux/dma-iommu.h index 4eac2670bfa1..92f20832fd28 100644 --- a/include/linux/dma-iommu.h +++ b/include/linux/dma-iommu.h @@ -78,6 +78,7 @@ void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list); struct iommu_domain; struct msi_msg; +struct device; static inline int iommu_dma_init(void) { -- cgit v1.2.3 From ae8eb443a17331a07579bc04817accaaaa62b78e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 12 May 2017 16:39:21 -0300 Subject: [media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE Fix a link error in this specific combination of config options: CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_CEC_CORE=m CONFIG_MEDIA_CEC_NOTIFIER=y CONFIG_VIDEO_STI_HDMI_CEC=m CONFIG_DRM_STI=y drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_remove': sti_hdmi.c:(.text.sti_hdmi_remove+0x10): undefined reference to `cec_notifier_set_phys_addr' sti_hdmi.c:(.text.sti_hdmi_remove+0x34): undefined reference to `cec_notifier_put' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_get_modes': sti_hdmi.c:(.text.sti_hdmi_connector_get_modes+0x4a): undefined reference to `cec_notifier_set_phys_addr_from_edid' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_probe': sti_hdmi.c:(.text.sti_hdmi_probe+0x204): undefined reference to `cec_notifier_get' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_detect': sti_hdmi.c:(.text.sti_hdmi_connector_detect+0x36): undefined reference to `cec_notifier_set_phys_addr' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_disable': sti_hdmi.c:(.text.sti_hdmi_disable+0xc0): undefined reference to `cec_notifier_set_phys_addr' The version below seems to work, though I don't particularly like the IS_REACHABLE() addition since that can be confusing to users. Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/cec-notifier.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/media/cec-notifier.h b/include/media/cec-notifier.h index 413335c8cb52..298f996969df 100644 --- a/include/media/cec-notifier.h +++ b/include/media/cec-notifier.h @@ -106,6 +106,16 @@ static inline void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n, { } +static inline void cec_notifier_register(struct cec_notifier *n, + struct cec_adapter *adap, + void (*callback)(struct cec_adapter *adap, u16 pa)) +{ +} + +static inline void cec_notifier_unregister(struct cec_notifier *n) +{ +} + #endif #endif -- cgit v1.2.3 From 9bd2bbc01d17ddd567cc0f81f77fe1163e497462 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Fri, 2 Jun 2017 20:35:51 -0700 Subject: elevator: fix truncation of icq_cache_name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc 7.1 reports the following warning: block/elevator.c: In function ‘elv_register’: block/elevator.c:898:5: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=] "%s_io_cq", e->elevator_name); ^~~~~~~~~~ block/elevator.c:897:3: note: ‘snprintf’ output between 7 and 22 bytes into a destination of size 21 snprintf(e->icq_cache_name, sizeof(e->icq_cache_name), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s_io_cq", e->elevator_name); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The bug is that the name of the icq_cache is 6 characters longer than the elevator name, but only ELV_NAME_MAX + 5 characters were reserved for it --- so in the case of a maximum-length elevator name, the 'q' character in "_io_cq" would be truncated by snprintf(). Fix it by reserving ELV_NAME_MAX + 6 characters instead. Signed-off-by: Eric Biggers Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe --- include/linux/elevator.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 9ec5e22846e0..0e306c5a86d6 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -153,7 +153,7 @@ struct elevator_type #endif /* managed by elevator core */ - char icq_cache_name[ELV_NAME_MAX + 5]; /* elvname + "_io_cq" */ + char icq_cache_name[ELV_NAME_MAX + 6]; /* elvname + "_io_cq" */ struct list_head list; }; -- cgit v1.2.3 From f3b7eaae1b35eb8077610eb7c7db042c9b0645e1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 7 Jun 2017 00:57:37 +0200 Subject: Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle" Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) as it turned out to be premature and triggered a number of different issues on various systems. That includes, but is not limited to, premature suspend-to-RAM aborts on Dell XPS 13 (9343) reported by Dominik. The issue the commit in question attempted to address is real and will need to be taken care of going forward, but evidently more work is needed for this purpose. Reported-by: Dominik Brodowski Signed-off-by: Rafael J. Wysocki --- include/linux/suspend.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 0b1cf32edfd7..d9718378a8be 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -189,8 +189,6 @@ struct platform_suspend_ops { struct platform_freeze_ops { int (*begin)(void); int (*prepare)(void); - void (*wake)(void); - void (*sync)(void); void (*restore)(void); void (*end)(void); }; @@ -430,8 +428,7 @@ extern unsigned int pm_wakeup_irq; extern bool pm_wakeup_pending(void); extern void pm_system_wakeup(void); -extern void pm_system_cancel_wakeup(void); -extern void pm_wakeup_clear(bool reset); +extern void pm_wakeup_clear(void); extern void pm_system_irq_wakeup(unsigned int irq_number); extern bool pm_get_wakeup_count(unsigned int *count, bool block); extern bool pm_save_wakeup_count(unsigned int count); @@ -481,7 +478,7 @@ static inline int unregister_pm_notifier(struct notifier_block *nb) static inline bool pm_wakeup_pending(void) { return false; } static inline void pm_system_wakeup(void) {} -static inline void pm_wakeup_clear(bool reset) {} +static inline void pm_wakeup_clear(void) {} static inline void pm_system_irq_wakeup(unsigned int irq_number) {} static inline void lock_system_sleep(void) {} -- cgit v1.2.3 From cf124db566e6b036b8bcbe8decbed740bdfac8c6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 8 May 2017 12:52:56 -0400 Subject: net: Fix inconsistent teardown and release of private netdev state. Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller --- include/linux/netdevice.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3f39d27decf4..ab7ca3fdc495 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1596,8 +1596,8 @@ enum netdev_priv_flags { * @rtnl_link_state: This enum represents the phases of creating * a new link * - * @destructor: Called from unregister, - * can be used to call free_netdev + * @needs_free_netdev: Should unregister perform free_netdev? + * @priv_destructor: Called from unregister * @npinfo: XXX: need comments on this one * @nd_net: Network namespace this network device is inside * @@ -1858,7 +1858,8 @@ struct net_device { RTNL_LINK_INITIALIZING, } rtnl_link_state:16; - void (*destructor)(struct net_device *dev); + bool needs_free_netdev; + void (*priv_destructor)(struct net_device *dev); #ifdef CONFIG_NETPOLL struct netpoll_info __rcu *npinfo; -- cgit v1.2.3 From 8397ed36b7c585f8d3e06c431f4137309124f78f Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 7 Jun 2017 12:26:23 -0600 Subject: net: ipv6: Release route when device is unregistering Roopa reported attempts to delete a bond device that is referenced in a multipath route is hanging: $ ifdown bond2 # ifupdown2 command that deletes virtual devices unregister_netdevice: waiting for bond2 to become free. Usage count = 2 Steps to reproduce: echo 1 > /proc/sys/net/ipv6/conf/all/ignore_routes_with_linkdown ip link add dev bond12 type bond ip link add dev bond13 type bond ip addr add 2001:db8:2::0/64 dev bond12 ip addr add 2001:db8:3::0/64 dev bond13 ip route add 2001:db8:33::0/64 nexthop via 2001:db8:2::2 nexthop via 2001:db8:3::2 ip link del dev bond12 ip link del dev bond13 The root cause is the recent change to keep routes on a linkdown. Update the check to detect when the device is unregistering and release the route for that case. Fixes: a1a22c12060e4 ("net: ipv6: Keep nexthop of multipath route on admin down") Reported-by: Roopa Prabhu Signed-off-by: David Ahern Acked-by: Roopa Prabhu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ab7ca3fdc495..846193dfb0ac 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -4262,6 +4262,11 @@ static inline const char *netdev_name(const struct net_device *dev) return dev->name; } +static inline bool netdev_unregistering(const struct net_device *dev) +{ + return dev->reg_state == NETREG_UNREGISTERING; +} + static inline const char *netdev_reg_state(const struct net_device *dev) { switch (dev->reg_state) { -- cgit v1.2.3 From 1123a6041654e8f889014659593bad4168e542c2 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 31 May 2017 14:03:11 +0200 Subject: srcu: Allow use of Classic SRCU from both process and interrupt context Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting down a guest running iperf on a VFIO assigned device. This happens because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt context, while a worker thread does the same inside kvm_set_irq(). If the interrupt happens while the worker thread is executing __srcu_read_lock(), updates to the Classic SRCU ->lock_count[] field or the Tree SRCU ->srcu_lock_count[] field can be lost. The docs say you are not supposed to call srcu_read_lock() and srcu_read_unlock() from irq context, but KVM interrupt injection happens from (host) interrupt context and it would be nice if SRCU supported the use case. KVM is using SRCU here not really for the "sleepable" part, but rather due to its IPI-free fast detection of grace periods. It is therefore not desirable to switch back to RCU, which would effectively revert commit 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING", 2014-01-16). However, the docs are overly conservative. You can have an SRCU instance only has users in irq context, and you can mix process and irq context as long as process context users disable interrupts. In addition, __srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and Classic SRCU. For those two implementations, only srcu_read_lock() is unsafe. When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(), in commit 5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments. Therefore it kept __this_cpu_inc(), with preempt_disable/enable in the caller. Tree SRCU however only does one increment, so on most architectures it is more efficient for __srcu_read_lock() to use this_cpu_inc(), and any performance differences appear to be down in the noise. Cc: stable@vger.kernel.org Fixes: 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING") Reported-by: Linu Cherian Suggested-by: Linu Cherian Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini Cc: Linus Torvalds Signed-off-by: Paul E. McKenney --- include/linux/srcu.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/srcu.h b/include/linux/srcu.h index 167ad8831aaf..4c1d5f7e62c4 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -172,9 +172,7 @@ static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp) { int retval; - preempt_disable(); retval = __srcu_read_lock(sp); - preempt_enable(); rcu_lock_acquire(&(sp)->dep_map); return retval; } -- cgit v1.2.3 From f9f314f323951a33d8b4a4f63f7d04b7f3bc0603 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 8 Jun 2017 15:37:44 -0300 Subject: [media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED Fix messages like this: adv7842.c:(.text+0x2edadd): undefined reference to `cec_unregister_adapter' when CEC_CORE=m but the driver including media/cec.h is built-in. In that case the static inlines provided in media/cec.h should be used by that driver. Reported-by: Randy Dunlap Reported-by: kbuild test robot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/cec.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/media/cec.h b/include/media/cec.h index bfa88d4d67e1..201f060978da 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -206,7 +206,7 @@ static inline bool cec_is_sink(const struct cec_adapter *adap) #define cec_phys_addr_exp(pa) \ ((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf -#if IS_ENABLED(CONFIG_CEC_CORE) +#if IS_REACHABLE(CONFIG_CEC_CORE) struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv, const char *name, u32 caps, u8 available_las); int cec_register_adapter(struct cec_adapter *adap, struct device *parent); -- cgit v1.2.3 From daa6630a310fe2ad90ce5f7d2d196cd0353ef4fa Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 8 Jun 2017 10:37:45 +0200 Subject: openvswitch: warn about missing first netlink attribute The first netlink attribute (value 0) must always be defined as none/unspec. Because we cannot change an existing UAPI, I add a comment to point the mistake and avoid to propagate it in a new ovs API in the future. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/uapi/linux/openvswitch.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index 61b7d36dfe34..156ee4cab82e 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -343,6 +343,7 @@ enum ovs_key_attr { #define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1) enum ovs_tunnel_key_attr { + /* OVS_TUNNEL_KEY_ATTR_NONE, standard nl API requires this attribute! */ OVS_TUNNEL_KEY_ATTR_ID, /* be64 Tunnel ID */ OVS_TUNNEL_KEY_ATTR_IPV4_SRC, /* be32 src IP address. */ OVS_TUNNEL_KEY_ATTR_IPV4_DST, /* be32 dst IP address. */ -- cgit v1.2.3 From 297fb414d0d190ca82bf0b46fb19d7fda1598737 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 8 Jun 2017 11:18:13 +0200 Subject: ethtool.h: remind to update 802.3ad when adding new speeds Each time a new speed is added, the bonding 802.3ad isn't updated. Add a comment to remind the developer to update this driver. Signed-off-by: Nicolas Dichtel Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index d179d7767f51..7d4a594d5d58 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1486,8 +1486,10 @@ enum ethtool_link_mode_bit_indices { * it was forced up into this mode or autonegotiated. */ -/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. */ -/* Update drivers/net/phy/phy.c:phy_speed_to_str() when adding new values */ +/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. + * Update drivers/net/phy/phy.c:phy_speed_to_str() and + * drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values. + */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 -- cgit v1.2.3 From 0620fddb56dfaf0e1034eeb69d79c73b361debbf Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:26 +0100 Subject: KEYS: sanitize key structs before freeing While a 'struct key' itself normally does not contain sensitive information, Documentation/security/keys.txt actually encourages this: "Having a payload is not required; and the payload can, in fact, just be a value stored in the struct key itself." In case someone has taken this advice, or will take this advice in the future, zero the key structure before freeing it. We might as well, and as a bonus this could make it a bit more difficult for an adversary to determine which keys have recently been in use. This is safe because the key_jar cache does not use a constructor. Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- include/linux/key.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/key.h b/include/linux/key.h index 0c9b93b0d1f7..78e25aabedaf 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -173,7 +173,6 @@ struct key { #ifdef KEY_DEBUGGING unsigned magic; #define KEY_DEBUG_MAGIC 0x18273645u -#define KEY_DEBUG_MAGIC_X 0xf8e9dacbu #endif unsigned long flags; /* status flags (change with bitops) */ -- cgit v1.2.3 From a77395447b0aeab9473a066ff28fbee01130206b Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:57 +0100 Subject: KEYS: DH: add __user annotations to keyctl_kdf_params Signed-off-by: Eric Biggers Signed-off-by: David Howells Acked-by: Stephan Mueller Signed-off-by: James Morris --- include/uapi/linux/keyctl.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/uapi/linux/keyctl.h b/include/uapi/linux/keyctl.h index 201c6644b237..ef16df06642a 100644 --- a/include/uapi/linux/keyctl.h +++ b/include/uapi/linux/keyctl.h @@ -70,8 +70,8 @@ struct keyctl_dh_params { }; struct keyctl_kdf_params { - char *hashname; - char *otherinfo; + char __user *hashname; + char __user *otherinfo; __u32 otherinfolen; __u32 __spare[8]; }; -- cgit v1.2.3 From 6d53cefb18e4646fb4bf62ccb6098fb3808486df Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 11 Jun 2017 15:51:56 -0700 Subject: compiler, clang: properly override 'inline' for clang Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by: Linus Torvalds --- include/linux/compiler-clang.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h index ea9126006a69..d614c5ea1b5e 100644 --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -21,4 +21,5 @@ * -Wunused-function. This turns out to avoid the need for complex #ifdef * directives. Suppress the warning in clang as well. */ -#define inline inline __attribute__((unused)) +#undef inline +#define inline inline __attribute__((unused)) notrace -- cgit v1.2.3 From 83848fbe7e6af978c080a88c130a67178b1ac0e4 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Wed, 7 Jun 2017 12:54:58 +0800 Subject: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Considering this case: 1. A program opens a sysfs table file 65535 times, it can increase validation_count and first increment cause the table to be mapped: validation_count = 65535 2. AML execution causes "Load" to be executed on the same table, this time it cannot increase validation_count, so validation_count remains: validation_count = 65535 3. The program closes sysfs table file 65535 times, it can decrease validation_count and the last decrement cause the table to be unmapped: validation_count = 0 4. AML code still accessing the loaded table, kernel crash can be observed. To prevent that from happening, add a validation_count threashold. When it is reached, the validation_count can no longer be incremented/decremented to invalidate the table descriptor (means preventing table unmappings) Note that code added in acpi_tb_put_table() is actually a no-op but changes the warning message into a "warn once" one. Lv Zheng. Signed-off-by: Lv Zheng [ rjw: Changelog, comments ] Signed-off-by: Rafael J. Wysocki --- include/acpi/actbl.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include') diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index d92543f3bbfd..bdc55c0da19c 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -374,6 +374,20 @@ struct acpi_table_desc { u16 validation_count; }; +/* + * Maximum value of the validation_count field in struct acpi_table_desc. + * When reached, validation_count cannot be changed any more and the table will + * be permanently regarded as validated. + * + * This is to prevent situations in which unbalanced table get/put operations + * may cause premature table unmapping in the OS to happen. + * + * The maximum validation count can be defined to any value, but should be + * greater than the maximum number of OS early stage mapping slots to avoid + * leaking early stage table mappings to the late stage. + */ +#define ACPI_MAX_TABLE_VALIDATIONS ACPI_UINT16_MAX + /* Masks for Flags field above */ #define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL (0) /* Virtual address, external maintained */ -- cgit v1.2.3 From db46a0e1be7eac45d0bb1bdcd438b8d47c920451 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 14 Jun 2017 16:15:24 +0900 Subject: net: update undefined ->ndo_change_mtu() comment Update ->ndo_change_mtu() callback comment to remove text about returning error in case of undefined callback. This change makes the comment match the existing code behavior. Signed-off-by: Magnus Damm Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 846193dfb0ac..4ed952c17fc7 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -914,8 +914,7 @@ struct xfrmdev_ops { * * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu); * Called when a user wants to change the Maximum Transfer Unit - * of a device. If not defined, any request to change MTU will - * will return an error. + * of a device. * * void (*ndo_tx_timeout)(struct net_device *dev); * Callback used when the transmitter has not made any progress -- cgit v1.2.3