From 62fe8cd50175ca797dcf3d39a7206da6ac0f6c50 Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Fri, 9 Mar 2012 17:53:53 +0900 Subject: mfd: Add s5m regulator operation mode This patch add variables for opmode of s5m series. S5M series have 4 operation modes. Off mode is always regulator off mode. On mode is always regulator on mode. Lowpower mode is that regualtor operate in low-power. Suspend mode is that regulator operation depends on AP suspend mode. Signed-off-by: Sangbeom Kim Signed-off-by: Mark Brown --- include/linux/mfd/s5m87xx/s5m-core.h | 1 + include/linux/mfd/s5m87xx/s5m-pmic.h | 29 +++++++++++++++++++++++++++++ 2 files changed, 30 insertions(+) (limited to 'include') diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h index a7480b57f92d..21603b42f22f 100644 --- a/include/linux/mfd/s5m87xx/s5m-core.h +++ b/include/linux/mfd/s5m87xx/s5m-core.h @@ -335,6 +335,7 @@ extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask); struct s5m_platform_data { struct s5m_regulator_data *regulators; + struct s5m_opmode_data *opmode; int device_type; int num_regulators; diff --git a/include/linux/mfd/s5m87xx/s5m-pmic.h b/include/linux/mfd/s5m87xx/s5m-pmic.h index a72a5d27e62e..7c719f20f58a 100644 --- a/include/linux/mfd/s5m87xx/s5m-pmic.h +++ b/include/linux/mfd/s5m87xx/s5m-pmic.h @@ -58,6 +58,8 @@ enum s5m8767_regulators { S5M8767_REG_MAX, }; +#define S5M8767_ENCTRL_SHIFT 6 + /* S5M8763 regulator ids */ enum s5m8763_regulators { S5M8763_LDO1, @@ -97,4 +99,31 @@ struct s5m_regulator_data { struct regulator_init_data *initdata; }; +/* + * s5m_opmode_data - regulator operation mode data + * @id: regulator id + * @mode: regulator operation mode + */ +struct s5m_opmode_data { + int id; + int mode; +}; + +/* + * s5m regulator operation mode + * S5M_OPMODE_OFF Regulator always OFF + * S5M_OPMODE_ON Regulator always ON + * S5M_OPMODE_LOWPOWER Regulator is on in low-power mode + * S5M_OPMODE_SUSPEND Regulator is changed by PWREN pin + * If PWREN is high, regulator is on + * If PWREN is low, regulator is off + */ + +enum s5m_opmode { + S5M_OPMODE_OFF, + S5M_OPMODE_ON, + S5M_OPMODE_LOWPOWER, + S5M_OPMODE_SUSPEND, +}; + #endif /* __LINUX_MFD_S5M_PMIC_H */ -- cgit v1.2.3 From 452534e50780697a7e1d3cf87cdfdd2b5a0d3c6b Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Thu, 22 Mar 2012 18:34:09 +0530 Subject: regulator: Add TPS65090 regulator driver Add TPS65090 regulator driver TPS65090 PMIC from TI consists of 3 step down converters, 2 always on LDOs and 7 current limited load switches. The output voltages are ON/OFF controllable and are meant to supply power to the components on target board. Signed-off-by: Venu Byravarasu Signed-off-by: Mark Brown --- include/linux/regulator/tps65090-regulator.h | 50 ++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 include/linux/regulator/tps65090-regulator.h (limited to 'include') diff --git a/include/linux/regulator/tps65090-regulator.h b/include/linux/regulator/tps65090-regulator.h new file mode 100644 index 000000000000..0fa04b64db3e --- /dev/null +++ b/include/linux/regulator/tps65090-regulator.h @@ -0,0 +1,50 @@ +/* + * Regulator driver interface for TI TPS65090 PMIC family + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __REGULATOR_TPS65090_H +#define __REGULATOR_TPS65090_H + +#include + +#define tps65090_rails(_name) "tps65090_"#_name + +enum { + TPS65090_ID_DCDC1, + TPS65090_ID_DCDC2, + TPS65090_ID_DCDC3, + TPS65090_ID_FET1, + TPS65090_ID_FET2, + TPS65090_ID_FET3, + TPS65090_ID_FET4, + TPS65090_ID_FET5, + TPS65090_ID_FET6, + TPS65090_ID_FET7, +}; + +/* + * struct tps65090_regulator_platform_data + * + * @regulator: The regulator init data. + * @slew_rate_uV_per_us: Slew rate microvolt per microsec. + */ + +struct tps65090_regulator_platform_data { + struct regulator_init_data regulator; +}; + +#endif /* __REGULATOR_TPS65090_H */ -- cgit v1.2.3 From a4d9f179cc788b7f4b735d32c2e4a3b2562e8240 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 7 Mar 2012 15:58:33 +0530 Subject: regulator: fixed: Support for open drain gpio pin Adding flag on fixed regulator board configuration structure to specify whether gpio is open drain type or not. Passing this information to gpio library when requesting gpio so that gpio driver can set the pin state accordingly, for open drain type: - Pin can be set HIGH as setting as input, PULL UP on pin make this as HIGH. - Pin can be set LOW as setting it as output and drive to LOW. The non-open drain pin can be set HIGH/LOW by setting it to output and driving it to HIGH/LOW. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- include/linux/regulator/fixed.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 936a7d8c11a9..f83f7440b488 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -26,6 +26,12 @@ struct regulator_init_data; * @gpio: GPIO to use for enable control * set to -EINVAL if not used * @startup_delay: Start-up time in microseconds + * @gpio_is_open_drain: Gpio pin is open drain or normal type. + * If it is open drain type then HIGH will be set + * through PULL-UP with setting gpio as input + * and low will be set as gpio-output with driven + * to low. For non-open-drain case, the gpio will + * will be in output and drive to low/high accordingly. * @enable_high: Polarity of enable GPIO * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at @@ -43,6 +49,7 @@ struct fixed_voltage_config { int microvolts; int gpio; unsigned startup_delay; + unsigned gpio_is_open_drain:1; unsigned enable_high:1; unsigned enabled_at_boot:1; struct regulator_init_data *init_data; -- cgit v1.2.3 From 65f26846b90611742f3b407cc538a1cad33abde8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Apr 2012 20:46:53 +0100 Subject: regulator: core: Constify the regulator_desc passed in when registering Drivers should be able to declare their descriptors const and the framework shouldn't ever be modifying the desciptor. Make the parameter and the pointer in regulator_dev const to enforce this. Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index fa8b55b8191c..1dcdf00e0db2 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -184,7 +184,7 @@ struct regulator_desc { * no other direct access). */ struct regulator_dev { - struct regulator_desc *desc; + const struct regulator_desc *desc; int exclusive; u32 use_count; u32 open_count; @@ -210,7 +210,8 @@ struct regulator_dev { struct dentry *debugfs; }; -struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, +struct regulator_dev * +regulator_register(const struct regulator_desc *regulator_desc, struct device *dev, const struct regulator_init_data *init_data, void *driver_data, struct device_node *of_node); void regulator_unregister(struct regulator_dev *rdev); -- cgit v1.2.3 From 6ffc3270210efa2bea526953a142ffc908f5bd86 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 4 Apr 2012 12:44:00 +0530 Subject: regulator: Add support for RICOH PMIC RC5T583 regulator The RC5T583 PMIC from RICOH consists of 4 DCDC and 10 LDOs. This driver supports the control of different regulator output through regulator interface. This driver depends on MFD driver of RC5T583 and uses mfd rc5t583 apis to communicate to device for accessing different device's registers. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- include/linux/mfd/rc5t583.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'include') diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index a2c61609d21d..b2c1f442d4ef 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h @@ -249,6 +249,26 @@ enum { RC5T583_EXT_PWRREQ2_CONTROL = 0x2, }; +enum { + RC5T583_REGULATOR_DC0, + RC5T583_REGULATOR_DC1, + RC5T583_REGULATOR_DC2, + RC5T583_REGULATOR_DC3, + RC5T583_REGULATOR_LDO0, + RC5T583_REGULATOR_LDO1, + RC5T583_REGULATOR_LDO2, + RC5T583_REGULATOR_LDO3, + RC5T583_REGULATOR_LDO4, + RC5T583_REGULATOR_LDO5, + RC5T583_REGULATOR_LDO6, + RC5T583_REGULATOR_LDO7, + RC5T583_REGULATOR_LDO8, + RC5T583_REGULATOR_LDO9, + + /* Should be last entry */ + RC5T583_REGULATOR_MAX, +}; + struct rc5t583 { struct device *dev; struct regmap *regmap; @@ -272,11 +292,20 @@ struct rc5t583 { * The board specific data is provided through this structure. * @irq_base: Irq base number on which this device registers their interrupts. * @enable_shutdown: Enable shutdown through the input pin "shutdown". + * @regulator_deepsleep_slot: The slot number on which device goes to sleep + * in device sleep mode. + * @regulator_ext_pwr_control: External power request regulator control. The + * regulator output enable/disable is controlled by the external + * power request input state. + * @reg_init_data: Regulator init data. */ struct rc5t583_platform_data { int irq_base; bool enable_shutdown; + int regulator_deepsleep_slot[RC5T583_REGULATOR_MAX]; + unsigned long regulator_ext_pwr_control[RC5T583_REGULATOR_MAX]; + struct regulator_init_data *reg_init_data[RC5T583_REGULATOR_MAX]; }; int rc5t583_write(struct device *dev, u8 reg, uint8_t val); -- cgit v1.2.3 From c172708d38a401b2f3f841dfcd862b469fa0b670 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 4 Apr 2012 00:50:22 +0100 Subject: regulator: core: Use a struct to pass in regulator runtime configuration Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 1dcdf00e0db2..4f529ed48d4c 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -148,10 +148,12 @@ enum regulator_type { }; /** - * struct regulator_desc - Regulator descriptor + * struct regulator_desc - Static regulator descriptor * - * Each regulator registered with the core is described with a structure of - * this type. + * Each regulator registered with the core is described with a + * structure of this type and a struct regulator_config. This + * structure contains the non-varying parts of the regulator + * description. * * @name: Identifying name for the regulator. * @supply_name: Identifying the regulator supply @@ -173,6 +175,26 @@ struct regulator_desc { struct module *owner; }; +/** + * struct regulator_config - Dynamic regulator descriptor + * + * Each regulator registered with the core is described with a + * structure of this type and a struct regulator_desc. This structure + * contains the runtime variable parts of the regulator description. + * + * @dev: struct device for the regulator + * @init_data: platform provided init data, passed through by driver + * @driver_data: private regulator data + * @of_node: OpenFirmware node to parse for device tree bindings (may be + * NULL). + */ +struct regulator_config { + struct device *dev; + const struct regulator_init_data *init_data; + void *driver_data; + struct device_node *of_node; +}; + /* * struct regulator_dev * @@ -212,8 +234,7 @@ struct regulator_dev { struct regulator_dev * regulator_register(const struct regulator_desc *regulator_desc, - struct device *dev, const struct regulator_init_data *init_data, - void *driver_data, struct device_node *of_node); + const struct regulator_config *config); void regulator_unregister(struct regulator_dev *rdev); int regulator_notifier_call_chain(struct regulator_dev *rdev, -- cgit v1.2.3 From 65b19ce6c223287ac95bbc22b12ef5a2738472d1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 15 Apr 2012 11:16:05 +0100 Subject: regulator: core: Allow drivers to pass in a regmap Since many regulators use regmap for register I/O and since there's quite a few very common patterns in the code allow drivers to pass in a regmap to the core for use in generic code. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- include/linux/regulator/driver.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4f529ed48d4c..2e753731217b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -19,6 +19,7 @@ #include #include +struct regmap; struct regulator_dev; struct regulator_init_data; @@ -187,12 +188,14 @@ struct regulator_desc { * @driver_data: private regulator data * @of_node: OpenFirmware node to parse for device tree bindings (may be * NULL). + * @regmap: regmap to use for core regmap helpers */ struct regulator_config { struct device *dev; const struct regulator_init_data *init_data; void *driver_data; struct device_node *of_node; + struct regmap *regmap; }; /* @@ -223,6 +226,7 @@ struct regulator_dev { struct device dev; struct regulation_constraints *constraints; struct regulator *supply; /* for tree */ + struct regmap *regmap; struct delayed_work disable_work; int deferred_disables; -- cgit v1.2.3 From 4ab5b3d92c863e55fa28cc41a7b005b7ae87afee Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 15 Apr 2012 11:23:30 +0100 Subject: regulator: core: Provide regmap based voltage_sel operations Since the voltage selector operations are intended to directly map a bitfield in the device register map into regulator API operations the code for implementing them is usually very standard we can save some code by providing standard implementations for devices using the regmap API. Drivers using regmap can pass their regmap in in the regmap_config struct, set vsel_reg and vsel_mask in their regulator_desc and then use regulator_{get,set}_voltage_sel_regmap in their ops. This saves a small amount of code from each driver. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- include/linux/regulator/driver.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 2e753731217b..d1c238970a6e 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -164,6 +164,9 @@ enum regulator_type { * @irq: Interrupt number for the regulator. * @type: Indicates if the regulator is a voltage or current regulator. * @owner: Module providing the regulator, used for refcounting. + + * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ + * @vsel_mask: Mask for register bitfield used for selector */ struct regulator_desc { const char *name; @@ -174,6 +177,9 @@ struct regulator_desc { int irq; enum regulator_type type; struct module *owner; + + unsigned int vsel_reg; + unsigned int vsel_mask; }; /** @@ -250,6 +256,9 @@ int rdev_get_id(struct regulator_dev *rdev); int regulator_mode_to_status(unsigned int); +int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev); +int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel); + void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); #endif -- cgit v1.2.3 From cd6dffb4c6c476f5787f4df3eda7ecb16e25780d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 15 Apr 2012 12:37:47 +0100 Subject: regulator: core: Provide standard enable operations for regmap users Since the enable(), disable() and is_enabled() operations for most regmap based regulators come down to reading and updating a single register bit we can factor out the code and allow these drivers to just define which bit to update using the enable_reg and enable_mask fields in their desc and then use operations provided by the core. As well as the code saving this opens the door to future optimisation of the bulk operations - if the core can realise that we are updating a single register for multiple regulators then it should be able to combine these updates into a single physical operation. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- include/linux/regulator/driver.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index d1c238970a6e..8160bc87be28 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -167,6 +167,8 @@ enum regulator_type { * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector + * @enable_reg: Register for control when using regmap enable/disable ops + * @enable_mask: Mask for control when using regmap enable/disable ops */ struct regulator_desc { const char *name; @@ -180,6 +182,8 @@ struct regulator_desc { unsigned int vsel_reg; unsigned int vsel_mask; + unsigned int enable_reg; + unsigned int enable_mask; }; /** @@ -258,6 +262,9 @@ int regulator_mode_to_status(unsigned int); int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev); int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel); +int regulator_is_enabled_regmap(struct regulator_dev *rdev); +int regulator_enable_regmap(struct regulator_dev *rdev); +int regulator_disable_regmap(struct regulator_dev *rdev); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); -- cgit v1.2.3 From 06c4998be96f2e1f304cf79d5e9d1662d864f7d1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 17 Apr 2012 17:08:56 +0800 Subject: regulator: tps65090: Use generic regmap enable/disable operations This patch converts tps65090 regulator driver to use generic regmap enable/disable operations. Also move struct tps65090 to include/linux/mfd/tps65090.h because the regulator driver needs to access the rmap field of struct tps65090. Signed-off-by: Axel Lin Acked-by: Venu Byravarasu Signed-off-by: Mark Brown --- include/linux/mfd/tps65090.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include') diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 38e31c55adbb..6bc31d854626 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -22,6 +22,19 @@ #ifndef __LINUX_MFD_TPS65090_H #define __LINUX_MFD_TPS65090_H +#include + +struct tps65090 { + struct mutex lock; + struct device *dev; + struct i2c_client *client; + struct regmap *rmap; + struct irq_chip irq_chip; + struct mutex irq_lock; + int irq_base; + unsigned int id; +}; + struct tps65090_subdev_info { int id; const char *name; -- cgit v1.2.3