From be646c2d2ba8e2e56596d72633705f8286698c25 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Wed, 15 May 2013 00:44:07 -0700 Subject: target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel Cc: Roland Dreier Signed-off-by: Nicholas Bellinger --- include/target/target_core_fabric.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index ba3471b73c07..8a26f0d55fd1 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -123,7 +123,7 @@ int transport_send_check_condition_and_sense(struct se_cmd *, int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool); int target_put_sess_cmd(struct se_session *, struct se_cmd *); void target_sess_cmd_list_set_waiting(struct se_session *); -void target_wait_for_sess_cmds(struct se_session *, int); +void target_wait_for_sess_cmds(struct se_session *); int core_alua_check_nonop_delay(struct se_cmd *); -- cgit v1.2.3 From 591a0ac7f14aae6bf11b1cb6b5a68480bd644ddb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 23 May 2013 12:07:50 +0300 Subject: OMAPDSS: Fix crash with DT boot When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi --- include/video/omapdss.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/video/omapdss.h b/include/video/omapdss.h index caefa093337d..9b52340ec3ff 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -741,6 +741,7 @@ struct omap_dss_driver { }; enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); int omap_dss_register_driver(struct omap_dss_driver *); void omap_dss_unregister_driver(struct omap_dss_driver *); -- cgit v1.2.3 From 2abb274629614bef4044a0b98ada42e977feadfd Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:56 +0100 Subject: xenbus: delay xenbus frontend resume if xenstored is not running If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- include/xen/xenbus.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 0a7515c1e3a4..569c07f2e344 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -70,6 +70,7 @@ struct xenbus_device { struct device dev; enum xenbus_state state; struct completion down; + struct work_struct work; }; static inline struct xenbus_device *to_xenbus_device(struct device *dev) -- cgit v1.2.3 From 9b31a328e344e62e7cc98ae574edcb7b674719bb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 00:52:44 -0700 Subject: target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index e773dfa5f98f..4ea4f985f394 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -543,6 +543,7 @@ struct se_session { struct list_head sess_list; struct list_head sess_acl_list; struct list_head sess_cmd_list; + struct list_head sess_wait_list; spinlock_t sess_cmd_lock; struct kref sess_kref; }; -- cgit v1.2.3 From 37448adfc7ce0d6d5892b87aa8d57edde4126f49 Mon Sep 17 00:00:00 2001 From: Lance Ortiz Date: Thu, 30 May 2013 08:25:12 -0600 Subject: aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz Acked-by: Borislav Petkov Acked-by: Rafael J. Wysocki Signed-off-by: Tony Luck --- include/linux/aer.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/aer.h b/include/linux/aer.h index ec10e1b24c1c..737f90ab4b62 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -49,10 +49,11 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } #endif -extern void cper_print_aer(const char *prefix, struct pci_dev *dev, +extern void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer); extern int cper_severity_to_aer(int cper_severity); extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity); + int severity, + struct aer_capability_regs *aer_regs); #endif //_AER_H_ -- cgit v1.2.3 From d5ddad4168348337d98d6b8f156a3892de444411 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:46:11 -0700 Subject: target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger --- include/target/target_core_fabric.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 8a26f0d55fd1..1dcce9cc99b9 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ sense_reason_t transport_generic_new_cmd(struct se_cmd *); void target_execute_cmd(struct se_cmd *cmd); -void transport_generic_free_cmd(struct se_cmd *, int); +int transport_generic_free_cmd(struct se_cmd *, int); bool transport_wait_for_tasks(struct se_cmd *); int transport_check_aborted_status(struct se_cmd *, int); -- cgit v1.2.3