From a096a8602f4fee42a18b7537a7467a28c44728af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 8 Mar 2025 23:03:27 +0200 Subject: wifi: cfg80211: move link reconfig parameters into a struct Add a new struct cfg80211_ml_reconf_req to collect the link reconfiguration parameters. Signed-off-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250308225541.0cf299c1fdd0.Id1a3b1092dc52d0d3731a8798522fdf2e052bf0b@changeid Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 6b170a8d086c..c7cfef104896 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -7,7 +7,7 @@ * Copyright 2006-2010 Johannes Berg * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation */ #include @@ -3082,6 +3082,16 @@ struct cfg80211_assoc_link { int error; }; +/** + * struct cfg80211_ml_reconf_req - MLO link reconfiguration request + * @add_links: data for links to add, see &struct cfg80211_assoc_link + * @rem_links: bitmap of links to remove + */ +struct cfg80211_ml_reconf_req { + struct cfg80211_assoc_link add_links[IEEE80211_MLD_MAX_NUM_LINKS]; + u16 rem_links; +}; + /** * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association. * @@ -4972,8 +4982,7 @@ struct cfg80211_ops { struct cfg80211_ttlm_params *params); u32 (*get_radio_mask)(struct wiphy *wiphy, struct net_device *dev); int (*assoc_ml_reconf)(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_assoc_link *add_links, - u16 rem_links); + struct cfg80211_ml_reconf_req *req); int (*set_epcs)(struct wiphy *wiphy, struct net_device *dev, bool val); }; -- cgit v1.2.3 From 969241371f06507f922633e42a4c1a8ce00f220e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 8 Mar 2025 23:03:28 +0200 Subject: wifi: cfg80211: allow setting extended MLD capa/ops Some extended MLD capabilities and operations bits (currently the "BTM MLD Recommendataion For Multiple APs Support" bit) may depend on userspace capabilities. Allow userspace to pass the values for this field that it supports to the association and link reconfiguration operations. Signed-off-by: Johannes Berg Reviewed-by: Ilan Peer Link: https://patch.msgid.link/20250308225541.bd52078b5f65.I4dd8f53b0030db7ea87a2e0920989e7e2c7b5345@changeid Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++++ include/uapi/linux/nl80211.h | 10 +++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c7cfef104896..29b9cf0fe6c8 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3086,10 +3086,13 @@ struct cfg80211_assoc_link { * struct cfg80211_ml_reconf_req - MLO link reconfiguration request * @add_links: data for links to add, see &struct cfg80211_assoc_link * @rem_links: bitmap of links to remove + * @ext_mld_capa_ops: extended MLD capabilities and operations set by + * userspace for the ML reconfiguration action frame */ struct cfg80211_ml_reconf_req { struct cfg80211_assoc_link add_links[IEEE80211_MLD_MAX_NUM_LINKS]; u16 rem_links; + u16 ext_mld_capa_ops; }; /** @@ -3164,6 +3167,8 @@ enum cfg80211_assoc_req_flags { * the link on which the association request should be sent * @ap_mld_addr: AP MLD address in case of MLO association request, * valid iff @link_id >= 0 + * @ext_mld_capa_ops: extended MLD capabilities and operations set by + * userspace for the association */ struct cfg80211_assoc_request { struct cfg80211_bss *bss; @@ -3184,6 +3189,7 @@ struct cfg80211_assoc_request { struct cfg80211_assoc_link links[IEEE80211_MLD_MAX_NUM_LINKS]; const u8 *ap_mld_addr; s8 link_id; + u16 ext_mld_capa_ops; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9d8ecf20ef0d..c59075acdb10 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -2893,6 +2893,12 @@ enum nl80211_commands { * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a * station interface. * + * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and + * operations that userspace implements to use during association/ML + * link reconfig, currently only "BTM MLD Recommendation For Multiple + * APs Support". Drivers may set additional flags that they support + * in the kernel or device. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3448,6 +3454,8 @@ enum nl80211_attrs { NL80211_ATTR_MLO_RECONF_REM_LINKS, NL80211_ATTR_EPCS, + NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From cf4bd1608882792d4742e27a819493312904a680 Mon Sep 17 00:00:00 2001 From: Anjaneyulu Date: Sat, 8 Mar 2025 23:03:30 +0200 Subject: wifi: cfg80211: allow IR in 20 MHz configurations Some regulatory bodies doesn't allow IR (initiate radioation) on a specific subband, but allows it for channels with a bandwidth of 20 MHz. Add a channel flag that indicates that, and consider it in cfg80211_reg_check_beaconing. While on it, fix the kernel doc of enum nl80211_reg_rule_flags and change it to use BIT(). Signed-off-by: Anjaneyulu Co-developed-by: Somashekhar Puttagangaiah Signed-off-by: Somashekhar Puttagangaiah Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid [fix typo] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 +++ include/uapi/linux/nl80211.h | 52 ++++++++++++++++++++++++-------------------- 2 files changed, 32 insertions(+), 23 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 29b9cf0fe6c8..0d423830a8ed 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -127,6 +127,8 @@ struct wiphy; * even if it is otherwise disabled. * @IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP: Allow using this channel for AP operation * with very low power (VLP), even if otherwise set to NO_IR. + * @IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY: Allow activity on a 20 MHz channel, + * even if otherwise set to NO_IR. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = BIT(0), @@ -155,6 +157,7 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT = BIT(23), IEEE80211_CHAN_CAN_MONITOR = BIT(24), IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP = BIT(25), + IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY = BIT(26), }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c59075acdb10..26cae1cc8727 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4335,6 +4335,8 @@ enum nl80211_wmm_rule { * otherwise completely disabled. * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a * very low power (VLP) AP, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY: This channel can be active in + * 20 MHz bandwidth, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4379,6 +4381,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, NL80211_FREQUENCY_ATTR_CAN_MONITOR, NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, + NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4590,31 +4593,34 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted * despite NO_IR configuration. + * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, + * despite NO_IR configuration. */ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, - NL80211_RRF_NO_CCK = 1<<1, - NL80211_RRF_NO_INDOOR = 1<<2, - NL80211_RRF_NO_OUTDOOR = 1<<3, - NL80211_RRF_DFS = 1<<4, - NL80211_RRF_PTP_ONLY = 1<<5, - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_NO_IR = 1<<7, - __NL80211_RRF_NO_IBSS = 1<<8, - NL80211_RRF_AUTO_BW = 1<<11, - NL80211_RRF_IR_CONCURRENT = 1<<12, - NL80211_RRF_NO_HT40MINUS = 1<<13, - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, - NL80211_RRF_NO_HE = 1<<17, - NL80211_RRF_NO_320MHZ = 1<<18, - NL80211_RRF_NO_EHT = 1<<19, - NL80211_RRF_PSD = 1<<20, - NL80211_RRF_DFS_CONCURRENT = 1<<21, - NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, - NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, - NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, + NL80211_RRF_NO_OFDM = 1 << 0, + NL80211_RRF_NO_CCK = 1 << 1, + NL80211_RRF_NO_INDOOR = 1 << 2, + NL80211_RRF_NO_OUTDOOR = 1 << 3, + NL80211_RRF_DFS = 1 << 4, + NL80211_RRF_PTP_ONLY = 1 << 5, + NL80211_RRF_PTMP_ONLY = 1 << 6, + NL80211_RRF_NO_IR = 1 << 7, + __NL80211_RRF_NO_IBSS = 1 << 8, + NL80211_RRF_AUTO_BW = 1 << 11, + NL80211_RRF_IR_CONCURRENT = 1 << 12, + NL80211_RRF_NO_HT40MINUS = 1 << 13, + NL80211_RRF_NO_HT40PLUS = 1 << 14, + NL80211_RRF_NO_80MHZ = 1 << 15, + NL80211_RRF_NO_160MHZ = 1 << 16, + NL80211_RRF_NO_HE = 1 << 17, + NL80211_RRF_NO_320MHZ = 1 << 18, + NL80211_RRF_NO_EHT = 1 << 19, + NL80211_RRF_PSD = 1 << 20, + NL80211_RRF_DFS_CONCURRENT = 1 << 21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1 << 22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, + NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR -- cgit v1.2.3 From cf12d3d71e72330b2c0bba467cc5bdea2232347e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 8 Mar 2025 23:03:32 +0200 Subject: wifi: cfg80211: improve supported_selector documentation Improve the documentation for supported BSS selectors to make it more precise. Signed-off-by: Johannes Berg Reviewed-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250308225541.ba402ff47314.I502b56111b62ea0be174ae76bd03684ae1d4aefb@changeid Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++-- include/uapi/linux/nl80211.h | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0d423830a8ed..c61894c1265a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3148,10 +3148,10 @@ enum cfg80211_assoc_req_flags { * included in the Current AP address field of the Reassociation Request * frame. * @flags: See &enum cfg80211_assoc_req_flags - * @supported_selectors: supported selectors in IEEE 802.11 format + * @supported_selectors: supported BSS selectors in IEEE 802.11 format * (or %NULL for no change). * If %NULL, then support for SAE_H2E should be assumed. - * @supported_selectors_len: Length of supported_selectors in octets. + * @supported_selectors_len: number of supported BSS selectors * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 26cae1cc8727..ddcc4cda74af 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2881,9 +2881,9 @@ enum nl80211_commands { * @NL80211_ATTR_VIF_RADIO_MASK: Bitmask of allowed radios (u32). * A value of 0 means all radios. * - * @NL80211_ATTR_SUPPORTED_SELECTORS: supported selectors, array of - * supported selectors as defined by IEEE 802.11 7.3.2.2 but without the - * length restriction (at most %NL80211_MAX_SUPP_SELECTORS). + * @NL80211_ATTR_SUPPORTED_SELECTORS: supported BSS Membership Selectors, array + * of supported selectors as defined by IEEE Std 802.11-2020 9.4.2.3 but + * without the length restriction (at most %NL80211_MAX_SUPP_SELECTORS). * This can be used to provide a list of selectors that are implemented * by the supplicant. If not given, support for SAE_H2E is assumed. * -- cgit v1.2.3 From e16caea70610ed4226034dfcdaa5c43b36ff9e0a Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Sat, 8 Mar 2025 23:03:37 +0200 Subject: wifi: cfg80211: Update the link address when a link is added When links are added, update the wireless device link addresses based on the information provided by the driver. Signed-off-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250308225541.d694a9125aba.I79b010ea9aab47893e4f22c266362fde30b7f9ac@changeid Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c61894c1265a..73f0e75cc814 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -9770,6 +9770,7 @@ struct cfg80211_mlo_reconf_done_data { u16 added_links; struct { struct cfg80211_bss *bss; + u8 *addr; } links[IEEE80211_MLD_MAX_NUM_LINKS]; }; -- cgit v1.2.3 From b5c1622762f0937a66b69b7f15466c28fe85dcf1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Mar 2025 12:25:34 +0100 Subject: wifi: cfg80211: expose cfg80211_chandef_get_width() This can be just a trivial inline, to simplify some code. Expose it, and also use it in util.c where it wasn't previously available. Reviewed-by: Miriam Rachel Korenblit Link: https://patch.msgid.link/20250311122534.c5c3b4af9a74.Ib25cf60f634dc359961182113214e5cdc3504e9c@changeid Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 73f0e75cc814..efbd79c67be2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1008,6 +1008,17 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, */ int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width); +/** + * cfg80211_chandef_get_width - return chandef width in MHz + * @c: chandef to return bandwidth for + * Return: channel width in MHz for the given chandef; note that it returns + * 80 for 80+80 configurations + */ +static inline int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) +{ + return nl80211_chan_width_to_mhz(c->width); +} + /** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check -- cgit v1.2.3