From 704126ad81b8cb7d3d70adb9ecb143f4d3fb38af Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Sun, 4 Jan 2009 16:28:52 +0800 Subject: VT-d: handle Invalidation Queue Error to avoid system hang When hardware detects any error with a descriptor from the invalidation queue, it stops fetching new descriptors from the queue until software clears the Invalidation Queue Error bit in the Fault Status register. Following fix handles the IQE so the kernel won't be trapped in an infinite loop. Signed-off-by: Yu Zhao Signed-off-by: David Woodhouse --- include/linux/intel-iommu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index c4f6c101dbcd..d2e3cbfba14f 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -194,6 +194,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) /* FSTS_REG */ #define DMA_FSTS_PPF ((u32)2) #define DMA_FSTS_PFO ((u32)1) +#define DMA_FSTS_IQE (1 << 4) #define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff) /* FRCD_REG, 32 bits access */ @@ -328,7 +329,7 @@ extern int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int size_order, u64 type, int non_present_entry_flush); -extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); +extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t); -- cgit v1.2.3 From 1d93e52eb48df986a3c4d5ad8a520bf1f6837367 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Wed, 11 Feb 2009 08:47:19 -0700 Subject: dmaengine: update kerneldoc Some of the kerneldoc comments in the dmaengine header describe already removed structure members. Remove them. Also add a short description for dma_device->device_is_tx_complete. Signed-off-by: Johannes Weiner Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 3e68469c1885..087e79acf8c7 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -97,7 +97,6 @@ typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t; /** * struct dma_chan_percpu - the per-CPU part of struct dma_chan - * @refcount: local_t used for open-coded "bigref" counting * @memcpy_count: transaction counter * @bytes_transferred: byte counter */ @@ -114,9 +113,6 @@ struct dma_chan_percpu { * @cookie: last cookie value returned to client * @chan_id: channel ID for sysfs * @dev: class device for sysfs - * @refcount: kref, used in "bigref" slow-mode - * @slow_ref: indicates that the DMA channel is free - * @rcu: the DMA channel's RCU head * @device_node: used to add this to the device chan list * @local: per-cpu pointer to a struct dma_chan_percpu * @client-count: how many clients are using this channel @@ -211,8 +207,6 @@ struct dma_async_tx_descriptor { * @global_node: list_head for global dma_device_list * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability - * @refcount: reference count - * @done: IO completion struct * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @device_alloc_chan_resources: allocate resources and return the @@ -225,6 +219,7 @@ struct dma_async_tx_descriptor { * @device_prep_dma_interrupt: prepares an end of chain interrupt operation * @device_prep_slave_sg: prepares a slave dma operation * @device_terminate_all: terminate all pending operations + * @device_is_tx_complete: poll for transaction completion * @device_issue_pending: push pending transactions to hardware */ struct dma_device { -- cgit v1.2.3 From 5ca431f9ae8db8c6edb9c64bebe6d6521077afd6 Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Wed, 18 Feb 2009 15:29:23 +0100 Subject: netfilter: nfnetlink_log: fix per-rule qthreshold override In NFLOG the per-rule qthreshold should overrides per-instance only it is set. With current code, the per-rule qthreshold is 1 if not set and it overrides the per-instance qthreshold. This patch modifies the default xt_NFLOG threshold from 1 to 0. Thus a value of 0 means there is no per-rule setting and the instance parameter has to apply. Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_NFLOG.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netfilter/xt_NFLOG.h b/include/linux/netfilter/xt_NFLOG.h index cdcd0ed58f7a..4b36aeb46a10 100644 --- a/include/linux/netfilter/xt_NFLOG.h +++ b/include/linux/netfilter/xt_NFLOG.h @@ -2,7 +2,7 @@ #define _XT_NFLOG_TARGET #define XT_NFLOG_DEFAULT_GROUP 0x1 -#define XT_NFLOG_DEFAULT_THRESHOLD 1 +#define XT_NFLOG_DEFAULT_THRESHOLD 0 #define XT_NFLOG_MASK 0x0 -- cgit v1.2.3 From 5962fc6d5fff09c8e6fb8cadcb18327a0f4277f7 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 18 Feb 2009 15:30:34 +0100 Subject: netfilter: nf_conntrack: don't try to deliver events for untracked connections The untracked conntrack actually does usually have events marked for delivery as its not special-cased in that part of the code. Skip the actual delivery since it impacts performance noticeably. Signed-off-by: Patrick McHardy --- include/net/netfilter/nf_conntrack_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h index e78afe7f28e3..c25068e38516 100644 --- a/include/net/netfilter/nf_conntrack_core.h +++ b/include/net/netfilter/nf_conntrack_core.h @@ -59,7 +59,7 @@ static inline int nf_conntrack_confirm(struct sk_buff *skb) struct nf_conn *ct = (struct nf_conn *)skb->nfct; int ret = NF_ACCEPT; - if (ct) { + if (ct && ct != &nf_conntrack_untracked) { if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) ret = __nf_conntrack_confirm(skb); nf_ct_deliver_cached_events(ct); -- cgit v1.2.3 From cd97f39b7cdf1c8a9c9f52865eec795b7f0c811d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 24 Feb 2009 19:19:49 +0100 Subject: i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT The unit in which user-space can set the bus timeout value is jiffies for historical reasons (back when HZ was always 100.) This is however not good because user-space doesn't know how long a jiffy lasts. The timeout value should instead be set in a fixed time unit. Given the original value of HZ, this unit should be 10 ms, for compatibility. Signed-off-by: Jean Delvare Acked-by: Wolfram Sang --- include/linux/i2c-dev.h | 2 +- include/linux/i2c.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index 311315b56b61..fd53bfd26470 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -33,7 +33,7 @@ */ #define I2C_RETRIES 0x0701 /* number of times a device address should be polled when not acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout in jiffies - call with int */ +#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ /* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses * are NOT supported! (due to code brokenness) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index fcfbfea3af72..c86c3b07604c 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -361,7 +361,7 @@ struct i2c_adapter { struct mutex bus_lock; struct mutex clist_lock; - int timeout; + int timeout; /* in jiffies */ int retries; struct device dev; /* the adapter device */ -- cgit v1.2.3 From fe56cf45f951b3810313584605c1d8a4f20b33a4 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 15:36:41 -0800 Subject: drm: Fix ordering of bit fields in EDID structure leading huge vsync values. Signed-off-by: Jesse Barnes Reviewed-by: Eric Anholt Signed-off-by: Dave Airlie --- include/drm/drm_edid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index c707c15f5164..ff8d27af4786 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -58,10 +58,10 @@ struct detailed_pixel_timing { u8 hsync_pulse_width_lo; u8 vsync_pulse_width_lo:4; u8 vsync_offset_lo:4; - u8 hsync_pulse_width_hi:2; - u8 hsync_offset_hi:2; u8 vsync_pulse_width_hi:2; u8 vsync_offset_hi:2; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; u8 width_mm_lo; u8 height_mm_lo; u8 height_mm_hi:4; -- cgit v1.2.3 From 7bec756c74b1a5079d5074144bb77a6b3e7d7783 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 16:09:34 -0800 Subject: drm: disable encoders before re-routing them MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some cases we may receive a mode config that has a different CRTC<->encoder map that the current configuration. In that case, we need to disable any re-routed encoders before setting the mode, otherwise they may not pick up the new CRTC (if the output types are incompatible for example). Tested-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- include/drm/drm_crtc_helper.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 0b0d236c2154..c7d4b2e606a5 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -76,6 +76,7 @@ struct drm_encoder_helper_funcs { void (*mode_set)(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); + struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder); /* detect for DAC style encoders */ enum drm_connector_status (*detect)(struct drm_encoder *encoder, struct drm_connector *connector); -- cgit v1.2.3 From 4ab0d47d0ab311eb181532c1ecb6d02905685071 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 24 Feb 2009 17:35:12 -0800 Subject: gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_t io_mapping_create_wc should take a resource_size_t parameter in place of unsigned long. With unsigned long, there will be no way to map greater than 4GB address in i386/32 bit. On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return error for such a case. Patch also adds a structure for io_mapping, that saves the base, size and type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on io_mapping_map calls. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Cc: Dave Airlie Cc: Jesse Barnes Cc: Eric Anholt Cc: Keith Packard Signed-off-by: Ingo Molnar --- include/linux/io-mapping.h | 46 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 35 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 82df31726a54..cbc2f0cd631b 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -30,11 +30,14 @@ * See Documentation/io_mapping.txt */ -/* this struct isn't actually defined anywhere */ -struct io_mapping; - #ifdef CONFIG_HAVE_ATOMIC_IOMAP +struct io_mapping { + resource_size_t base; + unsigned long size; + pgprot_t prot; +}; + /* * For small address space machines, mapping large objects * into the kernel virtual space isn't practical. Where @@ -43,23 +46,40 @@ struct io_mapping; */ static inline struct io_mapping * -io_mapping_create_wc(unsigned long base, unsigned long size) +io_mapping_create_wc(resource_size_t base, unsigned long size) { - return (struct io_mapping *) base; + struct io_mapping *iomap; + + if (!is_io_mapping_possible(base, size)) + return NULL; + + iomap = kmalloc(sizeof(*iomap), GFP_KERNEL); + if (!iomap) + return NULL; + + iomap->base = base; + iomap->size = size; + iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL)); + return iomap; } static inline void io_mapping_free(struct io_mapping *mapping) { + kfree(mapping); } /* Atomic map/unmap */ static inline void * io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0, - __pgprot(__PAGE_KERNEL_WC)); + resource_size_t phys_addr; + unsigned long pfn; + + BUG_ON(offset >= mapping->size); + phys_addr = mapping->base + offset; + pfn = (unsigned long) (phys_addr >> PAGE_SHIFT); + return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot); } static inline void @@ -71,8 +91,9 @@ io_mapping_unmap_atomic(void *vaddr) static inline void * io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return ioremap_wc(offset, PAGE_SIZE); + BUG_ON(offset >= mapping->size); + resource_size_t phys_addr = mapping->base + offset; + return ioremap_wc(phys_addr, PAGE_SIZE); } static inline void @@ -83,9 +104,12 @@ io_mapping_unmap(void *vaddr) #else +/* this struct isn't actually defined anywhere */ +struct io_mapping; + /* Create the io_mapping object*/ static inline struct io_mapping * -io_mapping_create_wc(unsigned long base, unsigned long size) +io_mapping_create_wc(resource_size_t base, unsigned long size) { return (struct io_mapping *) ioremap_wc(base, size); } -- cgit v1.2.3 From 8fed43684174b68f04d01d1210fd00536af790df Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:24 +0100 Subject: ide: fix refcounting in device drivers During host driver module removal del_gendisk() results in a final put on drive->gendev and freeing the drive by drive_release_dev(). Convert device drivers from using struct kref to use struct device so device driver's object holds reference on ->gendev and prevents drive from prematurely going away. Also fix ->remove methods to not erroneously drop reference on a host driver by using only put_device() instead of ide*_put(). Reported-by: Stanislaw Gruszka Tested-by: Stanislaw Gruszka Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/ide.h b/include/linux/ide.h index 194da5a4b0d6..fe235b65207e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -663,7 +663,7 @@ typedef struct ide_drive_s ide_drive_t; #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev) #define to_ide_drv(obj, cont_type) \ - container_of(obj, struct cont_type, kref) + container_of(obj, struct cont_type, dev) #define ide_drv_g(disk, cont_type) \ container_of((disk)->private_data, struct cont_type, driver) -- cgit v1.2.3 From a682604838763981613e42015cd0e39f2989d6bb Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 25 Feb 2009 18:03:42 -0800 Subject: rcu: Teach RCU that idle task is not quiscent state at boot This patch fixes a bug located by Vegard Nossum with the aid of kmemcheck, updated based on review comments from Nick Piggin, Ingo Molnar, and Andrew Morton. And cleans up the variable-name and function-name language. ;-) The boot CPU runs in the context of its idle thread during boot-up. During this time, idle_cpu(0) will always return nonzero, which will fool Classic and Hierarchical RCU into deciding that a large chunk of the boot-up sequence is a big long quiescent state. This in turn causes RCU to prematurely end grace periods during this time. This patch changes the rcutree.c and rcuclassic.c rcu_check_callbacks() function to ignore the idle task as a quiescent state until the system has started up the scheduler in rest_init(), introducing a new non-API function rcu_idle_now_means_idle() to inform RCU of this transition. RCU maintains an internal rcu_idle_cpu_truthful variable to track this state, which is then used by rcu_check_callback() to determine if it should believe idle_cpu(). Because this patch has the effect of disallowing RCU grace periods during long stretches of the boot-up sequence, this patch also introduces Josh Triplett's UP-only optimization that makes synchronize_rcu() be a no-op if num_online_cpus() returns 1. This allows boot-time code that calls synchronize_rcu() to proceed normally. Note, however, that RCU callbacks registered by call_rcu() will likely queue up until later in the boot sequence. Although rcuclassic and rcutree can also use this same optimization after boot completes, rcupreempt must restrict its use of this optimization to the portion of the boot sequence before the scheduler starts up, given that an rcupreempt RCU read-side critical section may be preeempted. In addition, this patch takes Nick Piggin's suggestion to make the system_state global variable be __read_mostly. Changes since v4: o Changes the name of the introduced function and variable to be less emotional. ;-) Changes since v3: o WARN_ON(nr_context_switches() > 0) to verify that RCU switches out of boot-time mode before the first context switch, as suggested by Nick Piggin. Changes since v2: o Created rcu_blocking_is_gp() internal-to-RCU API that determines whether a call to synchronize_rcu() is itself a grace period. o The definition of rcu_blocking_is_gp() for rcuclassic and rcutree checks to see if but a single CPU is online. o The definition of rcu_blocking_is_gp() for rcupreempt checks to see both if but a single CPU is online and if the system is still in early boot. This allows rcupreempt to again work correctly if running on a single CPU after booting is complete. o Added check to rcupreempt's synchronize_sched() for there being but one online CPU. Tested all three variants both SMP and !SMP, booted fine, passed a short rcutorture test on both x86 and Power. Located-by: Vegard Nossum Tested-by: Vegard Nossum Tested-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- include/linux/rcuclassic.h | 6 ++++++ include/linux/rcupdate.h | 4 ++++ include/linux/rcupreempt.h | 15 +++++++++++++++ include/linux/rcutree.h | 6 ++++++ 4 files changed, 31 insertions(+) (limited to 'include') diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h index f3f697df1d71..80044a4f3ab9 100644 --- a/include/linux/rcuclassic.h +++ b/include/linux/rcuclassic.h @@ -181,4 +181,10 @@ extern long rcu_batches_completed_bh(void); #define rcu_enter_nohz() do { } while (0) #define rcu_exit_nohz() do { } while (0) +/* A context switch is a grace period for rcuclassic. */ +static inline int rcu_blocking_is_gp(void) +{ + return num_online_cpus() == 1; +} + #endif /* __LINUX_RCUCLASSIC_H */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 921340a7b71c..528343e6da51 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -52,6 +52,9 @@ struct rcu_head { void (*func)(struct rcu_head *head); }; +/* Internal to kernel, but needed by rcupreempt.h. */ +extern int rcu_scheduler_active; + #if defined(CONFIG_CLASSIC_RCU) #include #elif defined(CONFIG_TREE_RCU) @@ -265,6 +268,7 @@ extern void rcu_barrier_sched(void); /* Internal to kernel */ extern void rcu_init(void); +extern void rcu_scheduler_starting(void); extern int rcu_needs_cpu(int cpu); #endif /* __LINUX_RCUPDATE_H */ diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h index 3e05c09b54a2..74304b4538d8 100644 --- a/include/linux/rcupreempt.h +++ b/include/linux/rcupreempt.h @@ -142,4 +142,19 @@ static inline void rcu_exit_nohz(void) #define rcu_exit_nohz() do { } while (0) #endif /* CONFIG_NO_HZ */ +/* + * A context switch is a grace period for rcupreempt synchronize_rcu() + * only during early boot, before the scheduler has been initialized. + * So, how the heck do we get a context switch? Well, if the caller + * invokes synchronize_rcu(), they are willing to accept a context + * switch, so we simply pretend that one happened. + * + * After boot, there might be a blocked or preempted task in an RCU + * read-side critical section, so we cannot then take the fastpath. + */ +static inline int rcu_blocking_is_gp(void) +{ + return num_online_cpus() == 1 && !rcu_scheduler_active; +} + #endif /* __LINUX_RCUPREEMPT_H */ diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index d4368b7975c3..a722fb67bb2d 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -326,4 +326,10 @@ static inline void rcu_exit_nohz(void) } #endif /* CONFIG_NO_HZ */ +/* A context switch is a grace period for rcutree. */ +static inline int rcu_blocking_is_gp(void) +{ + return num_online_cpus() == 1; +} + #endif /* __LINUX_RCUTREE_H */ -- cgit v1.2.3 From 1e42807918d17e8c93bf14fbb74be84b141334c1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 23 Feb 2009 09:03:10 +0100 Subject: block: reduce stack footprint of blk_recount_segments() blk_recalc_rq_segments() requires a request structure passed in, which we don't have from blk_recount_segments(). So the latter allocates one on the stack, using > 400 bytes of stack for that. This can cause us to spill over one page of stack from ext4 at least: 0) 4560 400 blk_recount_segments+0x43/0x62 1) 4160 32 bio_phys_segments+0x1c/0x24 2) 4128 32 blk_rq_bio_prep+0x2a/0xf9 3) 4096 32 init_request_from_bio+0xf9/0xfe 4) 4064 112 __make_request+0x33c/0x3f6 5) 3952 144 generic_make_request+0x2d1/0x321 6) 3808 64 submit_bio+0xb9/0xc3 7) 3744 48 submit_bh+0xea/0x10e 8) 3696 368 ext4_mb_init_cache+0x257/0xa6a [ext4] 9) 3328 288 ext4_mb_regular_allocator+0x421/0xcd9 [ext4] 10) 3040 160 ext4_mb_new_blocks+0x211/0x4b4 [ext4] 11) 2880 336 ext4_ext_get_blocks+0xb61/0xd45 [ext4] 12) 2544 96 ext4_get_blocks_wrap+0xf2/0x200 [ext4] 13) 2448 80 ext4_da_get_block_write+0x6e/0x16b [ext4] 14) 2368 352 mpage_da_map_blocks+0x7e/0x4b3 [ext4] 15) 2016 352 ext4_da_writepages+0x2ce/0x43c [ext4] 16) 1664 32 do_writepages+0x2d/0x3c 17) 1632 144 __writeback_single_inode+0x162/0x2cd 18) 1488 96 generic_sync_sb_inodes+0x1e3/0x32b 19) 1392 16 sync_sb_inodes+0xe/0x10 20) 1376 48 writeback_inodes+0x69/0xb3 21) 1328 208 balance_dirty_pages_ratelimited_nr+0x187/0x2f9 22) 1120 224 generic_file_buffered_write+0x1d4/0x2c4 23) 896 176 __generic_file_aio_write_nolock+0x35f/0x393 24) 720 80 generic_file_aio_write+0x6c/0xc8 25) 640 80 ext4_file_write+0xa9/0x137 [ext4] 26) 560 320 do_sync_write+0xf0/0x137 27) 240 48 vfs_write+0xb3/0x13c 28) 192 64 sys_write+0x4c/0x74 29) 128 128 system_call_fastpath+0x16/0x1b Split the segment counting out into a __blk_recalc_rq_segments() helper to avoid allocating an onstack request just for checking the physical segment count. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index dcaa0fd84b02..465d6babc847 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -708,6 +708,8 @@ struct req_iterator { }; /* This should not be used directly - use rq_for_each_segment */ +#define for_each_bio(_bio) \ + for (; _bio; _bio = _bio->bi_next) #define __rq_for_each_bio(_bio, rq) \ if ((rq->bio)) \ for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next) -- cgit v1.2.3 From 54e991242850edc8c53f71fa5aa3ba7a93ce38f5 Mon Sep 17 00:00:00 2001 From: Dhaval Giani Date: Fri, 27 Feb 2009 15:13:54 +0530 Subject: sched: don't allow setuid to succeed if the user does not have rt bandwidth Impact: fix hung task with certain (non-default) rt-limit settings Corey Hickey reported that on using setuid to change the uid of a rt process, the process would be unkillable and not be running. This is because there was no rt runtime for that user group. Add in a check to see if a user can attach an rt task to its task group. On failure, return EINVAL, which is also returned in CONFIG_CGROUP_SCHED. Reported-by: Corey Hickey Signed-off-by: Dhaval Giani Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- include/linux/sched.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index 8981e52c714f..8c216e057c94 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2291,9 +2291,13 @@ extern long sched_group_rt_runtime(struct task_group *tg); extern int sched_group_set_rt_period(struct task_group *tg, long rt_period_us); extern long sched_group_rt_period(struct task_group *tg); +extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk); #endif #endif +extern int task_can_switch_user(struct user_struct *up, + struct task_struct *tsk); + #ifdef CONFIG_TASK_XACCT static inline void add_rchar(struct task_struct *tsk, ssize_t amt) { -- cgit v1.2.3 From 5170836679185357dc1b7660bad13287b39e1e33 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 27 Feb 2009 14:03:03 -0800 Subject: Fix recursive lock in free_uid()/free_user_ns() free_uid() and free_user_ns() are corecursive when CONFIG_USER_SCHED=n, but free_user_ns() is called from free_uid() by way of uid_hash_remove(), which requires uidhash_lock to be held. free_user_ns() then calls free_uid() to complete the destruction. Fix this by deferring the destruction of the user_namespace. Signed-off-by: David Howells Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/user_namespace.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index 315bcd375224..cc4f45361dbb 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -13,6 +13,7 @@ struct user_namespace { struct kref kref; struct hlist_head uidhash_table[UIDHASH_SZ]; struct user_struct *creator; + struct work_struct destroyer; }; extern struct user_namespace init_user_ns; -- cgit v1.2.3 From 5c2522218059ca1f4174a568923b988aad3ddfda Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:01:36 +0000 Subject: net headers: cleanup dcbnl.h 1) add an include for 2) change dcbmsg.dcb_family from unsigned char to __u8 to be more consistent with use of kernel types Signed-off-by: Chris Leech Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- include/linux/dcbnl.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h index b0ef274e0031..7d2e10006188 100644 --- a/include/linux/dcbnl.h +++ b/include/linux/dcbnl.h @@ -20,10 +20,12 @@ #ifndef __LINUX_DCBNL_H__ #define __LINUX_DCBNL_H__ +#include + #define DCB_PROTO_VERSION 1 struct dcbmsg { - unsigned char dcb_family; + __u8 dcb_family; __u8 cmd; __u16 dcb_pad; }; -- cgit v1.2.3 From 709ab3261e3ed789c0bb31c6ab53c9eccb276522 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:01:42 +0000 Subject: net headers: export dcbnl.h The DCB netlink interface is required for building the userspace tools available at e1000.sourceforge.net Signed-off-by: Chris Leech Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index b97cdc516a8f..106c3ba50844 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -52,6 +52,7 @@ header-y += const.h header-y += cgroupstats.h header-y += cramfs_fs.h header-y += cycx_cfm.h +header-y += dcbnl.h header-y += dlmconstants.h header-y += dlm_device.h header-y += dlm_netlink.h -- cgit v1.2.3 From 5ce04e3de8c36ba37c56e94e3c4dc7973c7f546c Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Sun, 1 Mar 2009 08:53:27 -0800 Subject: fix warning in io_mapping_map_wc() Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar --- include/linux/io-mapping.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index cbc2f0cd631b..0adb0f91568c 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -91,8 +91,11 @@ io_mapping_unmap_atomic(void *vaddr) static inline void * io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) { + resource_size_t phys_addr; + BUG_ON(offset >= mapping->size); - resource_size_t phys_addr = mapping->base + offset; + phys_addr = mapping->base + offset; + return ioremap_wc(phys_addr, PAGE_SIZE); } -- cgit v1.2.3 From 17edde520927070a6bf14a6a75027c0b843443e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 22 Feb 2009 00:11:09 -0800 Subject: netns: Remove net_alive It turns out that net_alive is unnecessary, and the original problem that led to it being added was simply that the icmp code thought it was a network device and wound up being unable to handle packets while there were still packets in the network namespace. Now that icmp and tcp have been fixed to properly register themselves this problem is no longer present and we have a stronger guarantee that packets will not arrive in a network namespace then that provided by net_alive in netif_receive_skb. So remove net_alive allowing packet reception run a little faster. Additionally document the strong reason why network namespace cleanup is safe so that if something happens again someone else will have a chance of figuring it out. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/net/net_namespace.h | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 6fc13d905c5f..ded434b032a4 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -109,11 +109,6 @@ extern struct list_head net_namespace_list; #ifdef CONFIG_NET_NS extern void __put_net(struct net *net); -static inline int net_alive(struct net *net) -{ - return net && atomic_read(&net->count); -} - static inline struct net *get_net(struct net *net) { atomic_inc(&net->count); @@ -145,11 +140,6 @@ int net_eq(const struct net *net1, const struct net *net2) } #else -static inline int net_alive(struct net *net) -{ - return 1; -} - static inline struct net *get_net(struct net *net) { return net; @@ -234,6 +224,23 @@ struct pernet_operations { void (*exit)(struct net *net); }; +/* + * Use these carefully. If you implement a network device and it + * needs per network namespace operations use device pernet operations, + * otherwise use pernet subsys operations. + * + * This is critically important. Most of the network code cleanup + * runs with the assumption that dev_remove_pack has been called so no + * new packets will arrive during and after the cleanup functions have + * been called. dev_remove_pack is not per namespace so instead the + * guarantee of no more packets arriving in a network namespace is + * provided by ensuring that all network devices and all sockets have + * left the network namespace before the cleanup methods are called. + * + * For the longest time the ipv4 icmp code was registered as a pernet + * device which caused kernel oops, and panics during network + * namespace cleanup. So please don't get this wrong. + */ extern int register_pernet_subsys(struct pernet_operations *); extern void unregister_pernet_subsys(struct pernet_operations *); extern int register_pernet_gen_subsys(int *id, struct pernet_operations *); -- cgit v1.2.3 From 9d40bbda599def1e1d155d7f7dca14fe8744bd2b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 4 Mar 2009 23:46:25 -0800 Subject: vlan: Fix vlan-in-vlan crashes. As analyzed by Patrick McHardy, vlan needs to reset it's netdev_ops pointer in it's ->init() function but this leaves the compat method pointers stale. Add a netdev_resync_ops() and call it from the vlan code. Any other driver which changes ->netdev_ops after register_netdevice() will need to call this new function after doing so too. With help from Patrick McHardy. Tested-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ec54785d34f9..659366734f3f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1079,6 +1079,7 @@ extern void synchronize_net(void); extern int register_netdevice_notifier(struct notifier_block *nb); extern int unregister_netdevice_notifier(struct notifier_block *nb); extern int init_dummy_netdev(struct net_device *dev); +extern void netdev_resync_ops(struct net_device *dev); extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev); extern struct net_device *dev_get_by_index(struct net *net, int ifindex); -- cgit v1.2.3 From e7d3ef13d52a126438f687a1a32da65ff926ed57 Mon Sep 17 00:00:00 2001 From: Stuart Hayes Date: Wed, 4 Mar 2009 11:59:46 -0800 Subject: libata: change drive ready wait after hard reset to 5s This fixes problems during resume with drives that take longer than 1s to be ready. The ATA-6 spec appears to allow 5 seconds for a drive to be ready. On one affected system, this patch changes "PM: resume devices took..." message from 17 seconds to 4 seconds, and gets rid of a lot of ugly timeout/error messages. Without this patch, the libata code moves on after 1s, tries to send a soft reset (which the drive doesn't see because it isn't ready) which also times out, then an IDENTIFY command is sent to the drive which times out, and finally the error handler will try to send another hard reset which will finally get things working. Signed-off-by: Stuart Hayes Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 5d87bc09a1f5..dd818c7decd7 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -275,7 +275,7 @@ enum { * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 1000, + ATA_TMOUT_PMP_SRST_WAIT = 5000, /* ATA bus states */ BUS_UNKNOWN = 0, -- cgit v1.2.3 From 5825627c9463581fd9e70f8285685889ae5bb9bb Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 27 Feb 2009 17:35:43 +0900 Subject: libata: fix dma_unmap_sg misuse libata passes the returned value of dma_map_sg() to dma_unmap_sg(),which is the misuse of dma_unmap_sg(). DMA-mapping.txt says: To unmap a scatterlist, just call: pci_unmap_sg(pdev, sglist, nents, direction); Again, make sure DMA activity has already finished. PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be the _same_ one you passed into the pci_map_sg call, it should _NOT_ be the 'count' value _returned_ from the pci_map_sg call. Signed-off-by: FUJITA Tomonori Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index dd818c7decd7..fbf064e13ad5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -530,6 +530,7 @@ struct ata_queued_cmd { unsigned long flags; /* ATA_QCFLAG_xxx */ unsigned int tag; unsigned int n_elem; + unsigned int orig_n_elem; int dma_dir; -- cgit v1.2.3 From 84bda12af31f930e4200c5244aa111de2485d7b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 2 Mar 2009 18:53:26 +0900 Subject: libata: align ap->sector_buf ap->sector_buf is used as DMA target and should at least be aligned on cacheline. This caused problems on some embedded machines. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index fbf064e13ad5..dc18b87ed722 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -751,7 +751,8 @@ struct ata_port { acpi_handle acpi_handle; struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif - u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ + /* owned by EH */ + u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; }; /* The following initializer overrides a method to NULL whether one of -- cgit v1.2.3 From 849d7130001ab740a5a4778a561049841fdd77c9 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 5 Mar 2009 16:10:57 +0100 Subject: ide: allow to wrap interrupt handler Signed-off-by: Stanislaw Gruszka Cc: Andrew Victor [bart: minor checkpatch.pl / CodingStyle fixups] Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/ide.h b/include/linux/ide.h index fe235b65207e..e0cedfe9fad4 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -866,6 +866,7 @@ struct ide_host { unsigned int n_ports; struct device *dev[2]; unsigned int (*init_chipset)(struct pci_dev *); + irq_handler_t irq_handler; unsigned long host_flags; void *host_priv; ide_hwif_t *cur_port; /* for hosts requiring serialization */ -- cgit v1.2.3 From ebcad5aaea26da3cb2ca90b7f31a67a027eb60db Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 5 Mar 2009 16:10:59 +0100 Subject: remove stale comment from HDIO_GET_IDENTITY returns 256 words currently. Noticed by Norman Diamond. Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/hdreg.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index c37e9241fae7..ed21bd3dbd25 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -511,7 +511,6 @@ struct hd_driveid { unsigned short words69_70[2]; /* reserved words 69-70 * future command overlap and queuing */ - /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */ unsigned short words71_74[4]; /* reserved words 71-74 * for IDENTIFY PACKET DEVICE command */ -- cgit v1.2.3 From d42ad15b759d05a87f22b484af63987eff38ea88 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 5 Mar 2009 17:20:55 +0100 Subject: ata: add CFA specific identify data words Declare CFA specific identify data words 162 and 163 for future use. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik [bart: update patch summary/description] Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/ata.h b/include/linux/ata.h index 08a86d5cdf1b..9a061accd8b8 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -89,6 +89,8 @@ enum { ATA_ID_DLF = 128, ATA_ID_CSFO = 129, ATA_ID_CFA_POWER = 160, + ATA_ID_CFA_KEY_MGMT = 162, + ATA_ID_CFA_MODES = 163, ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), -- cgit v1.2.3 From ab96ddec7213004b632d24dc2cdcd2df5f16f50b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 7 Mar 2009 13:39:22 -0800 Subject: Input: serio - fix protocol number for TouchIT213 Protocol 0x37 has been reserved for iNexio devices and Sahara was supposed to get 0x38. Reported-by: Claudio Nieder Signed-off-by: Dmitry Torokhov --- include/linux/serio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/serio.h b/include/linux/serio.h index 1bcb357a01a1..e0417e4d3f15 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -212,7 +212,7 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_FUJITSU 0x35 #define SERIO_ZHENHUA 0x36 #define SERIO_INEXIO 0x37 -#define SERIO_TOUCHIT213 0x37 +#define SERIO_TOUCHIT213 0x38 #define SERIO_W8001 0x39 #endif -- cgit v1.2.3 From 129f8ae9b1b5be94517da76009ea956e89104ce8 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 9 Mar 2009 15:07:33 -0400 Subject: Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod." This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: Dave Jones --- include/linux/cpufreq.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 384b38d3e8e2..161042746afc 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -234,7 +234,6 @@ struct cpufreq_driver { int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg); int (*resume) (struct cpufreq_policy *policy); struct freq_attr **attr; - bool hide_interface; }; /* flags */ -- cgit v1.2.3 From 260cf8a2cbe022131a4850ea6175ed716dc2663c Mon Sep 17 00:00:00 2001 From: Pantelis Koukousoulas Date: Tue, 10 Mar 2009 13:16:14 +0200 Subject: drm: fix EDID parser problem with positive/negative hsync/vsync Comparing the layouts of struct detail_pixel_timing with x.org's struct detailed_timings and how those are handled, it appears that the hsync_positive and vsync_positive fields are backwards. This patch fixes https://bugs.freedesktop.org/show_bug.cgi?id=20019 for me. It was tested on 2 monitors, LG FLATRON L225WS 22" and a YAKUMO 17" for which more details are unknown. Signed-off-by: Pantelis Koukousoulas Signed-off-by: Dave Airlie --- include/drm/drm_edid.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index ff8d27af4786..a11cc9d32591 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -69,8 +69,8 @@ struct detailed_pixel_timing { u8 hborder; u8 vborder; u8 unknown0:1; - u8 vsync_positive:1; u8 hsync_positive:1; + u8 vsync_positive:1; u8 separate_sync:2; u8 stereo:1; u8 unknown6:1; -- cgit v1.2.3 From 76e6eee03353f01bfca707d4dbb1f10a4ee27dc0 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 12 Mar 2009 14:35:43 -0600 Subject: cpumask: tsk_cpumask for accessing the struct task_struct's cpus_allowed. This allows us to change the representation (to a dangling bitmap or cpumask_var_t) without breaking all the callers: they can use tsk_cpumask() now and won't see a difference as the changes roll into linux-next. Signed-off-by: Rusty Russell --- include/linux/sched.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index 8c216e057c94..011db2f4c94c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1419,6 +1419,9 @@ struct task_struct { #endif }; +/* Future-safe accessor for struct task_struct's cpus_allowed. */ +#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed) + /* * Priority of a process goes from 0..MAX_PRIO-1, valid RT * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH -- cgit v1.2.3 From 45e575ab9bfada5a5ef1b6174f8e749b1ecf0864 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 12 Mar 2009 14:35:44 -0600 Subject: cpumask: mm_cpumask for accessing the struct mm_struct's cpu_vm_mask. This allows us to change the representation (to a dangling bitmap or cpumask_var_t) without breaking all the callers: they can use mm_cpumask() now and won't see a difference as the changes roll into linux-next. Signed-off-by: Rusty Russell --- include/linux/mm_types.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 92915e81443f..d84feb7bdbf0 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -276,4 +276,7 @@ struct mm_struct { #endif }; +/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */ +#define mm_cpumask(mm) (&(mm)->cpu_vm_mask) + #endif /* _LINUX_MM_TYPES_H */ -- cgit v1.2.3