From f3ababa8ba2ace6668a24803910577a49dc146dd Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Fri, 8 Aug 2014 15:29:09 -0700 Subject: pinctrl: Add mux options 3 and 4 for rockchip pinctrl Newer Rockchip SoCs have more muxing slots. Add slots 3 and 4 since the rk3288 table goes all the way up to 4. Signed-off-by: Doug Anderson Reviewed-by: Heiko Stuebner Signed-off-by: Linus Walleij --- include/dt-bindings/pinctrl/rockchip.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h index cd5788be82ce..743e66a95e13 100644 --- a/include/dt-bindings/pinctrl/rockchip.h +++ b/include/dt-bindings/pinctrl/rockchip.h @@ -28,5 +28,7 @@ #define RK_FUNC_GPIO 0 #define RK_FUNC_1 1 #define RK_FUNC_2 2 +#define RK_FUNC_3 3 +#define RK_FUNC_4 4 #endif -- cgit v1.2.3 From 03e9f0cac5da6af85758276cb4624caf5911f2b9 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 3 Sep 2014 13:02:56 +0200 Subject: pinctrl: clean up after enable refactoring commit 2243a87d90b42eb38bc281957df3e57c712b5e56 "pinctrl: avoid duplicated calling enable_pinmux_setting for a pin" removed the .disable callback from the struct pinmux_ops, making the .enable() callback the only remaining callback. However .enable() is a bad name as it seems to imply that a muxing can also be disabled. Rename the callback to .set_mux() and also take this opportunity to clean out any remaining mentions of .disable() from the documentation. Acked-by: Stephen Warren Acked-by: Bjorn Andersson Acked-by: Fan Wu Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinmux.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index 3097aafbeb24..511bda9ed4bf 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -39,13 +39,12 @@ struct pinctrl_dev; * name can be used with the generic @pinctrl_ops to retrieve the * actual pins affected. The applicable groups will be returned in * @groups and the number of groups in @num_groups - * @enable: enable a certain muxing function with a certain pin group. The + * @set_mux: enable a certain muxing function with a certain pin group. The * driver does not need to figure out whether enabling this function * conflicts some other use of the pins in that group, such collisions * are handled by the pinmux subsystem. The @func_selector selects a * certain function whereas @group_selector selects a certain set of pins * to be used. On simple controllers the latter argument may be ignored - * @disable: disable a certain muxing selector with a certain pin group * @gpio_request_enable: requests and enables GPIO on a certain pin. * Implement this only if you can mux every pin individually as GPIO. The * affected GPIO range is passed along with an offset(pin number) into that @@ -68,8 +67,8 @@ struct pinmux_ops { unsigned selector, const char * const **groups, unsigned * const num_groups); - int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector, - unsigned group_selector); + int (*set_mux) (struct pinctrl_dev *pctldev, unsigned func_selector, + unsigned group_selector); int (*gpio_request_enable) (struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset); -- cgit v1.2.3 From 0d37899363b0e5486f8800231b7edd75e8b60942 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Sep 2014 20:01:55 +0200 Subject: pinctrl: generic: Fix PIN_CONFIG_DRIVE_OPEN_SOURCE source/drain doc mismatch PIN_CONFIG_DRIVE_OPEN_SOURCE enables open source, not open drain. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf-generic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index a15f10727eb8..d578a60eff23 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -57,7 +57,7 @@ * which are then pulled up with an external resistor. Setting this * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Setting this config will enable open drain mode, the + * (open emitter). Setting this config will enable open source mode, the * argument is ignored. * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current * passed as argument. The argument is in mA. -- cgit v1.2.3 From 4334ac2db2be9e278c95fd15260c1f49f698ffc5 Mon Sep 17 00:00:00 2001 From: Marek Roszko Date: Sat, 23 Aug 2014 23:12:04 -0400 Subject: pinctrl: at91: add drive strength configuration The SAMA5 and SAM9x5 series both have drive strength options for the PIOs. This patch adds the ability to set one of three hardware options for drive strengths of low, medium or high for the each pin. The actual current output of the chip based on the setting is defined in the datasheets and varies per pins separate from banks and with supply voltage. This patch adds three new dt-bindings that allow setting the strength when configuring pins. By default, no change will be made to the drive strength of a pin from its reset value. Due to the difference between the register addresses of the SAMA5 and SAM9x5 series, a new sama5d3-pinctrl id was added. Signed-off-by: Marek Roszko Acked-by: Nicolas Ferre Signed-off-by: Linus Walleij --- include/dt-bindings/pinctrl/at91.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index 0fee6ff77ffc..bbca3d038900 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -20,6 +20,11 @@ #define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH) +#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT (0x0 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_LOW (0x1 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) + #define AT91_PIOA 0 #define AT91_PIOB 1 #define AT91_PIOC 2 -- cgit v1.2.3