From 3d6ee287a3e341c88eafd0b4620b12d640b3736b Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 12 Mar 2013 20:26:02 +0100 Subject: clk: Introduce optional is_prepared callback To reflect whether a clk_hw is prepared the clk_hw may implement the optional is_prepared callback. If not implemented we fall back to use the software prepare counter. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 7f197d7addb0..ee946862e058 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -45,6 +45,10 @@ struct clk_hw; * undo any work done in the @prepare callback. Called with * prepare_lock held. * + * @is_prepared: Queries the hardware to determine if the clock is prepared. + * This function is allowed to sleep. Optional, if this op is not + * set then the prepare count will be used. + * * @enable: Enable the clock atomically. This must not return until the * clock is generating a valid clock signal, usable by consumer * devices. Called with enable_lock held. This function must not @@ -108,6 +112,7 @@ struct clk_hw; struct clk_ops { int (*prepare)(struct clk_hw *hw); void (*unprepare)(struct clk_hw *hw); + int (*is_prepared)(struct clk_hw *hw); int (*enable)(struct clk_hw *hw); void (*disable)(struct clk_hw *hw); int (*is_enabled)(struct clk_hw *hw); @@ -351,6 +356,7 @@ unsigned int __clk_get_enable_count(struct clk *clk); unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); +bool __clk_is_prepared(struct clk *clk); bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); -- cgit v1.2.3 From 3cc8247f1dce79511de8bf0f69ab02a46cc315b7 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 12 Mar 2013 20:26:04 +0100 Subject: clk: Introduce optional unprepare_unused callback An unprepare_unused callback is introduced due to the same reasons to why the disable_unused callback was added. During the clk_disable_unused sequence, those clk_hw that needs specific treatment with regards to being unprepared, shall implement the unprepare_unused callback. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index ee946862e058..56e6cc12c796 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -49,6 +49,10 @@ struct clk_hw; * This function is allowed to sleep. Optional, if this op is not * set then the prepare count will be used. * + * @unprepare_unused: Unprepare the clock atomically. Only called from + * clk_disable_unused for prepare clocks with special needs. + * Called with prepare mutex held. This function may sleep. + * * @enable: Enable the clock atomically. This must not return until the * clock is generating a valid clock signal, usable by consumer * devices. Called with enable_lock held. This function must not @@ -113,6 +117,7 @@ struct clk_ops { int (*prepare)(struct clk_hw *hw); void (*unprepare)(struct clk_hw *hw); int (*is_prepared)(struct clk_hw *hw); + void (*unprepare_unused)(struct clk_hw *hw); int (*enable)(struct clk_hw *hw); void (*disable)(struct clk_hw *hw); int (*is_enabled)(struct clk_hw *hw); -- cgit v1.2.3 From ce4f3313b05c836c21a91ac89f87dccf84ce9561 Mon Sep 17 00:00:00 2001 From: Peter De Schrijver Date: Fri, 22 Mar 2013 14:07:53 +0200 Subject: clk: add table lookup to mux Add a table lookup feature to the mux clock. Also allow arbitrary masks instead of the width. This will be used by some clocks on Tegra114. Also adapt the tegra periph clk because it uses struct clk_mux directly. Signed-off-by: Peter De Schrijver Tested-by: Stephen Warren Signed-off-by: Mike Turquette --- include/linux/clk-private.h | 2 +- include/linux/clk-provider.h | 9 ++++++++- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index 9c7f5807824b..dd7adff76e81 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -152,7 +152,7 @@ struct clk { }, \ .reg = _reg, \ .shift = _shift, \ - .width = _width, \ + .mask = BIT(_width) - 1, \ .flags = _mux_flags, \ .lock = _lock, \ }; \ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 56e6cc12c796..63ba3b740794 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -297,8 +297,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, struct clk_mux { struct clk_hw hw; void __iomem *reg; + u32 *table; + u32 mask; u8 shift; - u8 width; u8 flags; spinlock_t *lock; }; @@ -307,11 +308,17 @@ struct clk_mux { #define CLK_MUX_INDEX_BIT BIT(1) extern const struct clk_ops clk_mux_ops; + struct clk *clk_register_mux(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock); +struct clk *clk_register_mux_table(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u32 mask, + u8 clk_mux_flags, u32 *table, spinlock_t *lock); + /** * struct clk_fixed_factor - fixed multiplier and divider clock * -- cgit v1.2.3 From ece70094f6ab2107d4313fa1802b13dab0234ac5 Mon Sep 17 00:00:00 2001 From: Prashant Gaikwad Date: Wed, 20 Mar 2013 17:30:34 +0530 Subject: clk: Add composite clock type Not all clocks are required to be decomposed into basic clock types but at the same time want to use the functionality provided by these basic clock types instead of duplicating. For example, Tegra SoC has ~100 clocks which can be decomposed into Mux -> Div -> Gate clock types making the clock count to ~300. Also, parent change operation can not be performed on gate clock which forces to use mux clock in driver if want to change the parent. Instead aggregate the basic clock types functionality into one clock and just use this clock for all operations. This clock type re-uses the functionality of basic clock types and not limited to basic clock types but any hardware-specific implementation. Signed-off-by: Prashant Gaikwad Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 63ba3b740794..1f0352802794 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -342,6 +342,37 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned int mult, unsigned int div); +/*** + * struct clk_composite - aggregate clock of mux, divider and gate clocks + * + * @hw: handle between common and hardware-specific interfaces + * @mux_hw: handle between composite and hardware-specifix mux clock + * @div_hw: handle between composite and hardware-specifix divider clock + * @gate_hw: handle between composite and hardware-specifix gate clock + * @mux_ops: clock ops for mux + * @div_ops: clock ops for divider + * @gate_ops: clock ops for gate + */ +struct clk_composite { + struct clk_hw hw; + struct clk_ops ops; + + struct clk_hw *mux_hw; + struct clk_hw *div_hw; + struct clk_hw *gate_hw; + + const struct clk_ops *mux_ops; + const struct clk_ops *div_ops; + const struct clk_ops *gate_ops; +}; + +struct clk *clk_register_composite(struct device *dev, const char *name, + const char **parent_names, int num_parents, + struct clk_hw *mux_hw, const struct clk_ops *mux_ops, + struct clk_hw *div_hw, const struct clk_ops *div_ops, + struct clk_hw *gate_hw, const struct clk_ops *gate_ops, + unsigned long flags); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock -- cgit v1.2.3 From e874a6697710f52fa8ab29487a99034d5d96fdcc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Mon, 25 Feb 2013 11:44:26 -0300 Subject: clk: arm: sunxi: Add a new clock driver for sunxi SOCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit implements the base CPU clocks for sunxi devices. It has been tested using a slightly modified cpufreq driver from the linux-sunxi 3.0 tree. Additionally, document the new bindings introduced by this patch. Idling: / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 60000000 cpu 0 0 60000000 axi 0 0 60000000 ahb 0 0 60000000 apb0 0 0 30000000 dummy 0 0 0 After "yes >/dev/null &": / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 1008000000 cpu 0 0 1008000000 axi 0 0 336000000 ahb 0 0 168000000 apb0 0 0 84000000 dummy 0 0 0 Signed-off-by: Emilio López Acked-by: Maxime Ripard Signed-off-by: Mike Turquette --- include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/clk/sunxi.h (limited to 'include') diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 000000000000..e074fdd5a236 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +void __init sunxi_init_clocks(void); + +#endif -- cgit v1.2.3 From 3566d40c1a4617461b38c82059bdc41d622faa8b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Mon, 25 Mar 2013 14:35:07 +0000 Subject: clk: fix clk_mux::flags kerneldoc The kerneldoc comment for struct clk_mux documented the non-existent num_clks instead of flags. Correct this. Signed-off-by: James Hogan Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 1f0352802794..b1675074fe7c 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -284,7 +284,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * @reg: register controlling multiplexer * @shift: shift to multiplexer bit field * @width: width of mutliplexer bit field - * @num_clks: number of parent clocks + * @flags: hardware-specific flags * @lock: register lock * * Clock with multiple selectable parents. Implements .get_parent, .set_parent -- cgit v1.2.3 From 056b205316cc3dcf8a67cf813a26ff8a72bf3cb9 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Tue, 2 Apr 2013 15:36:56 -0700 Subject: clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag Dividers which have CLK_DIVIDER_ONE_BASED set have a redundant state, being a divider value of zero. Some hardware implementations allow a zero divider which simply doesn't alter the frequency. I.e. it acts like a divide by one or bypassing the divider. This flag is used to handle such HW in the clk-divider model. Signed-off-by: Soren Brinkmann Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index b1675074fe7c..9fdfae74d669 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -249,9 +249,14 @@ struct clk_div_table { * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is * the raw value read from the register, with the value of zero considered - * invalid + * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from * the hardware register + * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have + * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. + * Some hardware implementations gracefully handle this case and allow a + * zero divisor by not modifying their input clock + * (divide by one / bypass). */ struct clk_divider { struct clk_hw hw; @@ -265,6 +270,7 @@ struct clk_divider { #define CLK_DIVIDER_ONE_BASED BIT(0) #define CLK_DIVIDER_POWER_OF_TWO BIT(1) +#define CLK_DIVIDER_ALLOW_ZERO BIT(2) extern const struct clk_ops clk_divider_ops; struct clk *clk_register_divider(struct device *dev, const char *name, -- cgit v1.2.3 From fb72a0590b770f7da6a02bde6b8a147a3d9f6168 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Wed, 3 Apr 2013 12:17:12 -0700 Subject: clk: Properly handle notifier return values Notifiers may return NOTIFY_(OK|DONE|STOP|BAD). The CCF uses an inconsistent mix of checking against NOTIFY_STOP or NOTIFY_BAD. This inconsistency leaves errors undetected in some cases: clk_set_parent() calls __clk_speculate_rates(), which stops when it hits a NOTIFIER_BAD (STOP is ignored), and passes this value back to the caller. clk_set_parent() compares this return value against NOTIFY_STOP only, ignoring NOTIFY_BAD returns. Use NOTIFY_STOP_MASK to detect a negative notifier return value and document all four return value options. Signed-off-by: Soren Brinkmann Signed-off-by: Mike Turquette --- include/linux/clk.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/clk.h b/include/linux/clk.h index b3ac22d0fc1f..9a6d04524b1a 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -28,16 +28,16 @@ struct clk; * PRE_RATE_CHANGE - called immediately before the clk rate is changed, * to indicate that the rate change will proceed. Drivers must * immediately terminate any operations that will be affected by the - * rate change. Callbacks may either return NOTIFY_DONE or - * NOTIFY_STOP. + * rate change. Callbacks may either return NOTIFY_DONE, NOTIFY_OK, + * NOTIFY_STOP or NOTIFY_BAD. * * ABORT_RATE_CHANGE: called if the rate change failed for some reason * after PRE_RATE_CHANGE. In this case, all registered notifiers on * the clk will be called with ABORT_RATE_CHANGE. Callbacks must - * always return NOTIFY_DONE. + * always return NOTIFY_DONE or NOTIFY_OK. * * POST_RATE_CHANGE - called after the clk rate change has successfully - * completed. Callbacks must always return NOTIFY_DONE. + * completed. Callbacks must always return NOTIFY_DONE or NOTIFY_OK. * */ #define PRE_RATE_CHANGE BIT(0) -- cgit v1.2.3 From 79b16641efabd14944dbfc2fde2ae1e8ae8413bc Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 12 Apr 2013 13:57:44 +0200 Subject: clk: add device tree fixed-factor-clock binding support Add support for DT "fixed-factor-clock" binding to the common fixed factor clock support. Signed-off-by: Gregory CLEMENT Tested-by: Christian Ruppert Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 9fdfae74d669..e7b7cbc53815 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -325,6 +325,8 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name, void __iomem *reg, u8 shift, u32 mask, u8 clk_mux_flags, u32 *table, spinlock_t *lock); +void of_fixed_factor_clk_setup(struct device_node *node); + /** * struct clk_fixed_factor - fixed multiplier and divider clock * -- cgit v1.2.3 From 9abd5f0555df6cd36130feb742f1def6d99c60fe Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 11 Apr 2013 21:42:29 +0200 Subject: clk: add si5351 i2c common clock driver This patch adds a common clock driver for Silicon Labs Si5351a/b/c i2c programmable clock generators. Currently, the driver does not support VXCO feature of si5351b. Passing platform_data or DT bindings selectively allows to overwrite stored Si5351 configuration which is very helpful for clock generators with empty eeprom configuration. Corresponding device tree binding documentation is also added. Signed-off-by: Sebastian Hesselbarth Tested-by: Daniel Mack Acked-by: Guenter Roeck Tested-by: Michal Bachraty Signed-off-by: Mike Turquette --- include/linux/platform_data/si5351.h | 114 +++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 include/linux/platform_data/si5351.h (limited to 'include') diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h new file mode 100644 index 000000000000..92dabcaf6499 --- /dev/null +++ b/include/linux/platform_data/si5351.h @@ -0,0 +1,114 @@ +/* + * Si5351A/B/C programmable clock generator platform_data. + */ + +#ifndef __LINUX_PLATFORM_DATA_SI5351_H__ +#define __LINUX_PLATFORM_DATA_SI5351_H__ + +struct clk; + +/** + * enum si5351_variant - SiLabs Si5351 chip variant + * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input) + * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input) + * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input) + * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input) + */ +enum si5351_variant { + SI5351_VARIANT_A = 1, + SI5351_VARIANT_A3 = 2, + SI5351_VARIANT_B = 3, + SI5351_VARIANT_C = 4, +}; + +/** + * enum si5351_pll_src - Si5351 pll clock source + * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input + * @SI5351_PLL_SRC_CLKIN: pll source clock is CLKIN input (Si5351C only) + */ +enum si5351_pll_src { + SI5351_PLL_SRC_DEFAULT = 0, + SI5351_PLL_SRC_XTAL = 1, + SI5351_PLL_SRC_CLKIN = 2, +}; + +/** + * enum si5351_multisynth_src - Si5351 multisynth clock source + * @SI5351_MULTISYNTH_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_MULTISYNTH_SRC_VCO0: multisynth source clock is VCO0 + * @SI5351_MULTISYNTH_SRC_VCO1: multisynth source clock is VCO1/VXCO + */ +enum si5351_multisynth_src { + SI5351_MULTISYNTH_SRC_DEFAULT = 0, + SI5351_MULTISYNTH_SRC_VCO0 = 1, + SI5351_MULTISYNTH_SRC_VCO1 = 2, +}; + +/** + * enum si5351_clkout_src - Si5351 clock output clock source + * @SI5351_CLKOUT_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_CLKOUT_SRC_MSYNTH_N: clkout N source clock is multisynth N + * @SI5351_CLKOUT_SRC_MSYNTH_0_4: clkout N source clock is multisynth 0 (N<4) + * or 4 (N>=4) + * @SI5351_CLKOUT_SRC_XTAL: clkout N source clock is XTAL + * @SI5351_CLKOUT_SRC_CLKIN: clkout N source clock is CLKIN (Si5351C only) + */ +enum si5351_clkout_src { + SI5351_CLKOUT_SRC_DEFAULT = 0, + SI5351_CLKOUT_SRC_MSYNTH_N = 1, + SI5351_CLKOUT_SRC_MSYNTH_0_4 = 2, + SI5351_CLKOUT_SRC_XTAL = 3, + SI5351_CLKOUT_SRC_CLKIN = 4, +}; + +/** + * enum si5351_drive_strength - Si5351 clock output drive strength + * @SI5351_DRIVE_DEFAULT: default, do not change eeprom config + * @SI5351_DRIVE_2MA: 2mA clock output drive strength + * @SI5351_DRIVE_4MA: 4mA clock output drive strength + * @SI5351_DRIVE_6MA: 6mA clock output drive strength + * @SI5351_DRIVE_8MA: 8mA clock output drive strength + */ +enum si5351_drive_strength { + SI5351_DRIVE_DEFAULT = 0, + SI5351_DRIVE_2MA = 2, + SI5351_DRIVE_4MA = 4, + SI5351_DRIVE_6MA = 6, + SI5351_DRIVE_8MA = 8, +}; + +/** + * struct si5351_clkout_config - Si5351 clock output configuration + * @clkout: clkout number + * @multisynth_src: multisynth source clock + * @clkout_src: clkout source clock + * @pll_master: if true, clkout can also change pll rate + * @drive: output drive strength + * @rate: initial clkout rate, or default if 0 + */ +struct si5351_clkout_config { + enum si5351_multisynth_src multisynth_src; + enum si5351_clkout_src clkout_src; + enum si5351_drive_strength drive; + bool pll_master; + unsigned long rate; +}; + +/** + * struct si5351_platform_data - Platform data for the Si5351 clock driver + * @variant: Si5351 chip variant + * @clk_xtal: xtal input clock + * @clk_clkin: clkin input clock + * @pll_src: array of pll source clock setting + * @clkout: array of clkout configuration + */ +struct si5351_platform_data { + enum si5351_variant variant; + struct clk *clk_xtal; + struct clk *clk_clkin; + enum si5351_pll_src pll_src[2]; + struct si5351_clkout_config clkout[8]; +}; + +#endif -- cgit v1.2.3 From d3a1c7be8361e2fbb6affbdb19de47ca48d6c402 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Thu, 11 Apr 2013 11:31:36 -0700 Subject: clk: composite: rename 'div' references to 'rate' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rename all div_hw and div_ops related variables and functions to use rate_hw, rate_ops, etc. This is to make the rate-change portion of the composite clk implementation more generic. A patch following this one will allow for fixed-rate clocks to reuse this infrastructure. Signed-off-by: Mike Turquette Reviewed-by: Prashant Gaikwad Tested-by: Emilio López Cc: Gregory CLEMENT --- include/linux/clk-provider.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index e7b7cbc53815..11860985fecb 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -354,11 +354,11 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, * struct clk_composite - aggregate clock of mux, divider and gate clocks * * @hw: handle between common and hardware-specific interfaces - * @mux_hw: handle between composite and hardware-specifix mux clock - * @div_hw: handle between composite and hardware-specifix divider clock - * @gate_hw: handle between composite and hardware-specifix gate clock + * @mux_hw: handle between composite and hardware-specific mux clock + * @rate_hw: handle between composite and hardware-specific rate clock + * @gate_hw: handle between composite and hardware-specific gate clock * @mux_ops: clock ops for mux - * @div_ops: clock ops for divider + * @rate_ops: clock ops for rate * @gate_ops: clock ops for gate */ struct clk_composite { @@ -366,18 +366,18 @@ struct clk_composite { struct clk_ops ops; struct clk_hw *mux_hw; - struct clk_hw *div_hw; + struct clk_hw *rate_hw; struct clk_hw *gate_hw; const struct clk_ops *mux_ops; - const struct clk_ops *div_ops; + const struct clk_ops *rate_ops; const struct clk_ops *gate_ops; }; struct clk *clk_register_composite(struct device *dev, const char *name, const char **parent_names, int num_parents, struct clk_hw *mux_hw, const struct clk_ops *mux_ops, - struct clk_hw *div_hw, const struct clk_ops *div_ops, + struct clk_hw *rate_hw, const struct clk_ops *rate_ops, struct clk_hw *gate_hw, const struct clk_ops *gate_ops, unsigned long flags); -- cgit v1.2.3