From f2c5092190f21e02d384f750bcc473554f3aa3f8 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 14 Jun 2022 20:18:14 +0200 Subject: arch/*: Disable softirq stacks on PREEMPT_RT. PREEMPT_RT preempts softirqs and the current implementation avoids do_softirq_own_stack() and only uses __do_softirq(). Disable the unused softirqs stacks on PREEMPT_RT to save some memory and ensure that do_softirq_own_stack() is not used bwcause it is not expected. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Arnd Bergmann --- include/asm-generic/softirq_stack.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-generic/softirq_stack.h b/include/asm-generic/softirq_stack.h index eceeecf6a5bd..d3e2d81656e0 100644 --- a/include/asm-generic/softirq_stack.h +++ b/include/asm-generic/softirq_stack.h @@ -2,7 +2,7 @@ #ifndef __ASM_GENERIC_SOFTIRQ_STACK_H #define __ASM_GENERIC_SOFTIRQ_STACK_H -#ifdef CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK +#if defined(CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK) && !defined(CONFIG_PREEMPT_RT) void do_softirq_own_stack(void); #else static inline void do_softirq_own_stack(void) -- cgit v1.2.3 From d593d64f043add170d8ea9cf698449637917dcf9 Mon Sep 17 00:00:00 2001 From: Prasad Sodagudi Date: Wed, 18 May 2022 22:14:14 +0530 Subject: lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan Signed-off-by: Prasad Sodagudi Signed-off-by: Sai Prakash Ranjan Acked-by: Steven Rostedt (Google) Signed-off-by: Arnd Bergmann --- include/trace/events/rwmmio.h | 97 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 include/trace/events/rwmmio.h (limited to 'include') diff --git a/include/trace/events/rwmmio.h b/include/trace/events/rwmmio.h new file mode 100644 index 000000000000..de41159216c1 --- /dev/null +++ b/include/trace/events/rwmmio.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM rwmmio + +#if !defined(_TRACE_RWMMIO_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_RWMMIO_H + +#include + +DECLARE_EVENT_CLASS(rwmmio_rw_template, + + TP_PROTO(unsigned long caller, u64 val, u8 width, volatile void __iomem *addr), + + TP_ARGS(caller, val, width, addr), + + TP_STRUCT__entry( + __field(unsigned long, caller) + __field(unsigned long, addr) + __field(u64, val) + __field(u8, width) + ), + + TP_fast_assign( + __entry->caller = caller; + __entry->val = val; + __entry->addr = (unsigned long)addr; + __entry->width = width; + ), + + TP_printk("%pS width=%d val=%#llx addr=%#lx", + (void *)__entry->caller, __entry->width, + __entry->val, __entry->addr) +); + +DEFINE_EVENT(rwmmio_rw_template, rwmmio_write, + TP_PROTO(unsigned long caller, u64 val, u8 width, volatile void __iomem *addr), + TP_ARGS(caller, val, width, addr) +); + +DEFINE_EVENT(rwmmio_rw_template, rwmmio_post_write, + TP_PROTO(unsigned long caller, u64 val, u8 width, volatile void __iomem *addr), + TP_ARGS(caller, val, width, addr) +); + +TRACE_EVENT(rwmmio_read, + + TP_PROTO(unsigned long caller, u8 width, const volatile void __iomem *addr), + + TP_ARGS(caller, width, addr), + + TP_STRUCT__entry( + __field(unsigned long, caller) + __field(unsigned long, addr) + __field(u8, width) + ), + + TP_fast_assign( + __entry->caller = caller; + __entry->addr = (unsigned long)addr; + __entry->width = width; + ), + + TP_printk("%pS width=%d addr=%#lx", + (void *)__entry->caller, __entry->width, __entry->addr) +); + +TRACE_EVENT(rwmmio_post_read, + + TP_PROTO(unsigned long caller, u64 val, u8 width, const volatile void __iomem *addr), + + TP_ARGS(caller, val, width, addr), + + TP_STRUCT__entry( + __field(unsigned long, caller) + __field(unsigned long, addr) + __field(u64, val) + __field(u8, width) + ), + + TP_fast_assign( + __entry->caller = caller; + __entry->val = val; + __entry->addr = (unsigned long)addr; + __entry->width = width; + ), + + TP_printk("%pS width=%d val=%#llx addr=%#lx", + (void *)__entry->caller, __entry->width, + __entry->val, __entry->addr) +); + +#endif /* _TRACE_RWMMIO_H */ + +#include -- cgit v1.2.3 From 210031971cdd25a2a2b70c190de98c237db0731f Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Wed, 18 May 2022 22:14:16 +0530 Subject: asm-generic/io: Add logging support for MMIO accessors Add logging support for MMIO high level accessors such as read{b,w,l,q} and their relaxed versions to aid in debugging unexpected crashes/hangs caused by the corresponding MMIO operation. Signed-off-by: Sai Prakash Ranjan Signed-off-by: Arnd Bergmann --- include/asm-generic/io.h | 91 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 87 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index 7ce93aaf69f8..9c5114335a2d 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -10,6 +10,7 @@ #include /* I/O is all done through memory accesses */ #include /* for memset() and memcpy() */ #include +#include #ifdef CONFIG_GENERIC_IOMAP #include @@ -61,6 +62,44 @@ #define __io_par(v) __io_ar(v) #endif +/* + * "__DISABLE_TRACE_MMIO__" flag can be used to disable MMIO tracing for + * specific kernel drivers in case of excessive/unwanted logging. + * + * Usage: Add a #define flag at the beginning of the driver file. + * Ex: #define __DISABLE_TRACE_MMIO__ + * #include <...> + * ... + */ +#if IS_ENABLED(CONFIG_TRACE_MMIO_ACCESS) && !(defined(__DISABLE_TRACE_MMIO__)) +#include + +DECLARE_TRACEPOINT(rwmmio_write); +DECLARE_TRACEPOINT(rwmmio_post_write); +DECLARE_TRACEPOINT(rwmmio_read); +DECLARE_TRACEPOINT(rwmmio_post_read); + +void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr); +void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr); +void log_read_mmio(u8 width, const volatile void __iomem *addr, + unsigned long caller_addr); +void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr, + unsigned long caller_addr); + +#else + +static inline void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_read_mmio(u8 width, const volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr, + unsigned long caller_addr) {} + +#endif /* CONFIG_TRACE_MMIO_ACCESS */ /* * __raw_{read,write}{b,w,l,q}() access memory in native endianness. @@ -149,9 +188,11 @@ static inline u8 readb(const volatile void __iomem *addr) { u8 val; + log_read_mmio(8, addr, _THIS_IP_); __io_br(); val = __raw_readb(addr); __io_ar(val); + log_post_read_mmio(val, 8, addr, _THIS_IP_); return val; } #endif @@ -162,9 +203,11 @@ static inline u16 readw(const volatile void __iomem *addr) { u16 val; + log_read_mmio(16, addr, _THIS_IP_); __io_br(); val = __le16_to_cpu((__le16 __force)__raw_readw(addr)); __io_ar(val); + log_post_read_mmio(val, 16, addr, _THIS_IP_); return val; } #endif @@ -175,9 +218,11 @@ static inline u32 readl(const volatile void __iomem *addr) { u32 val; + log_read_mmio(32, addr, _THIS_IP_); __io_br(); val = __le32_to_cpu((__le32 __force)__raw_readl(addr)); __io_ar(val); + log_post_read_mmio(val, 32, addr, _THIS_IP_); return val; } #endif @@ -189,9 +234,11 @@ static inline u64 readq(const volatile void __iomem *addr) { u64 val; + log_read_mmio(64, addr, _THIS_IP_); __io_br(); val = __le64_to_cpu(__raw_readq(addr)); __io_ar(val); + log_post_read_mmio(val, 64, addr, _THIS_IP_); return val; } #endif @@ -201,9 +248,11 @@ static inline u64 readq(const volatile void __iomem *addr) #define writeb writeb static inline void writeb(u8 value, volatile void __iomem *addr) { + log_write_mmio(value, 8, addr, _THIS_IP_); __io_bw(); __raw_writeb(value, addr); __io_aw(); + log_post_write_mmio(value, 8, addr, _THIS_IP_); } #endif @@ -211,9 +260,11 @@ static inline void writeb(u8 value, volatile void __iomem *addr) #define writew writew static inline void writew(u16 value, volatile void __iomem *addr) { + log_write_mmio(value, 16, addr, _THIS_IP_); __io_bw(); __raw_writew((u16 __force)cpu_to_le16(value), addr); __io_aw(); + log_post_write_mmio(value, 16, addr, _THIS_IP_); } #endif @@ -221,9 +272,11 @@ static inline void writew(u16 value, volatile void __iomem *addr) #define writel writel static inline void writel(u32 value, volatile void __iomem *addr) { + log_write_mmio(value, 32, addr, _THIS_IP_); __io_bw(); __raw_writel((u32 __force)__cpu_to_le32(value), addr); __io_aw(); + log_post_write_mmio(value, 32, addr, _THIS_IP_); } #endif @@ -232,9 +285,11 @@ static inline void writel(u32 value, volatile void __iomem *addr) #define writeq writeq static inline void writeq(u64 value, volatile void __iomem *addr) { + log_write_mmio(value, 64, addr, _THIS_IP_); __io_bw(); __raw_writeq(__cpu_to_le64(value), addr); __io_aw(); + log_post_write_mmio(value, 64, addr, _THIS_IP_); } #endif #endif /* CONFIG_64BIT */ @@ -248,7 +303,12 @@ static inline void writeq(u64 value, volatile void __iomem *addr) #define readb_relaxed readb_relaxed static inline u8 readb_relaxed(const volatile void __iomem *addr) { - return __raw_readb(addr); + u8 val; + + log_read_mmio(8, addr, _THIS_IP_); + val = __raw_readb(addr); + log_post_read_mmio(val, 8, addr, _THIS_IP_); + return val; } #endif @@ -256,7 +316,12 @@ static inline u8 readb_relaxed(const volatile void __iomem *addr) #define readw_relaxed readw_relaxed static inline u16 readw_relaxed(const volatile void __iomem *addr) { - return __le16_to_cpu(__raw_readw(addr)); + u16 val; + + log_read_mmio(16, addr, _THIS_IP_); + val = __le16_to_cpu(__raw_readw(addr)); + log_post_read_mmio(val, 16, addr, _THIS_IP_); + return val; } #endif @@ -264,7 +329,12 @@ static inline u16 readw_relaxed(const volatile void __iomem *addr) #define readl_relaxed readl_relaxed static inline u32 readl_relaxed(const volatile void __iomem *addr) { - return __le32_to_cpu(__raw_readl(addr)); + u32 val; + + log_read_mmio(32, addr, _THIS_IP_); + val = __le32_to_cpu(__raw_readl(addr)); + log_post_read_mmio(val, 32, addr, _THIS_IP_); + return val; } #endif @@ -272,7 +342,12 @@ static inline u32 readl_relaxed(const volatile void __iomem *addr) #define readq_relaxed readq_relaxed static inline u64 readq_relaxed(const volatile void __iomem *addr) { - return __le64_to_cpu(__raw_readq(addr)); + u64 val; + + log_read_mmio(64, addr, _THIS_IP_); + val = __le64_to_cpu(__raw_readq(addr)); + log_post_read_mmio(val, 64, addr, _THIS_IP_); + return val; } #endif @@ -280,7 +355,9 @@ static inline u64 readq_relaxed(const volatile void __iomem *addr) #define writeb_relaxed writeb_relaxed static inline void writeb_relaxed(u8 value, volatile void __iomem *addr) { + log_write_mmio(value, 8, addr, _THIS_IP_); __raw_writeb(value, addr); + log_post_write_mmio(value, 8, addr, _THIS_IP_); } #endif @@ -288,7 +365,9 @@ static inline void writeb_relaxed(u8 value, volatile void __iomem *addr) #define writew_relaxed writew_relaxed static inline void writew_relaxed(u16 value, volatile void __iomem *addr) { + log_write_mmio(value, 16, addr, _THIS_IP_); __raw_writew(cpu_to_le16(value), addr); + log_post_write_mmio(value, 16, addr, _THIS_IP_); } #endif @@ -296,7 +375,9 @@ static inline void writew_relaxed(u16 value, volatile void __iomem *addr) #define writel_relaxed writel_relaxed static inline void writel_relaxed(u32 value, volatile void __iomem *addr) { + log_write_mmio(value, 32, addr, _THIS_IP_); __raw_writel(__cpu_to_le32(value), addr); + log_post_write_mmio(value, 32, addr, _THIS_IP_); } #endif @@ -304,7 +385,9 @@ static inline void writel_relaxed(u32 value, volatile void __iomem *addr) #define writeq_relaxed writeq_relaxed static inline void writeq_relaxed(u64 value, volatile void __iomem *addr) { + log_write_mmio(value, 64, addr, _THIS_IP_); __raw_writeq(__cpu_to_le64(value), addr); + log_post_write_mmio(value, 64, addr, _THIS_IP_); } #endif -- cgit v1.2.3 From 4313a24985f00340eeb591fd66aa2b257b9e0a69 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 23 May 2022 21:59:02 +0200 Subject: arch/*/: remove CONFIG_VIRT_TO_BUS All architecture-independent users of virt_to_bus() and bus_to_virt() have been fixed to use the dma mapping interfaces or have been removed now. This means the definitions on most architectures, and the CONFIG_VIRT_TO_BUS symbol are now obsolete and can be removed. The only exceptions to this are a few network and scsi drivers for m68k Amiga and VME machines and ppc32 Macintosh. These drivers work correctly with the old interfaces and are probably not worth changing. On alpha and parisc, virt_to_bus() were still used in asm/floppy.h. alpha can use isa_virt_to_bus() like x86 does, and parisc can just open-code the virt_to_phys() here, as this is architecture specific code. I tried updating the bus-virt-phys-mapping.rst documentation, which started as an email from Linus to explain some details of the Linux-2.0 driver interfaces. The bits about virt_to_bus() were declared obsolete backin 2000, and the rest is not all that relevant any more, so in the end I just decided to remove the file completely. Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Acked-by: Michael Ellerman (powerpc) Acked-by: Helge Deller # parisc Signed-off-by: Arnd Bergmann --- include/asm-generic/io.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'include') diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index 9c5114335a2d..7197e0642757 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -1142,20 +1142,6 @@ static inline void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr) } #endif -#ifdef CONFIG_VIRT_TO_BUS -#ifndef virt_to_bus -static inline unsigned long virt_to_bus(void *address) -{ - return (unsigned long)address; -} - -static inline void *bus_to_virt(unsigned long address) -{ - return (void *)address; -} -#endif -#endif - #ifndef memset_io #define memset_io memset_io /** -- cgit v1.2.3