From 737eb0301f296d55c22350c6968ff1ef51bacb5f Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 20 Feb 2015 14:53:46 +0000 Subject: genirq / PM: better describe IRQF_NO_SUSPEND semantics The IRQF_NO_SUSPEND flag is intended to be used for interrupts required to be enabled during the suspend-resume cycle. This mostly consists of IPIs and timer interrupts, potentially including chained irqchip interrupts if these are necessary to handle timers or IPIs. If an interrupt does not fall into one of the aforementioned categories, requesting it with IRQF_NO_SUSPEND is likely incorrect. Using IRQF_NO_SUSPEND does not guarantee that the interrupt can wake the system from a suspended state. For an interrupt to be able to trigger a wakeup, it may be necessary to program various components of the system. In these cases it is necessary to use {enable,disabled}_irq_wake. Unfortunately, several drivers assume that IRQF_NO_SUSPEND ensures that an IRQ can wake up the system, and the documentation can be read ambiguously w.r.t. this property. This patch updates the documentation regarding IRQF_NO_SUSPEND to make this caveat explicit, hopefully making future misuse rarer. Cleanup of existing misuse will occur as part of later patch series. Signed-off-by: Mark Rutland Acked-by: Peter Zijlstra (Intel) Signed-off-by: Rafael J. Wysocki --- include/linux/interrupt.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index d9b05b5bf8c7..606771c7cac2 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -52,7 +52,9 @@ * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished. * Used by threaded interrupts which need to keep the * irq line disabled until the threaded handler has been run. - * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend + * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend. Does not guarantee + * that this interrupt will wake the system from a suspended + * state. See Documentation/power/suspend-and-interrupts.txt * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set * IRQF_NO_THREAD - Interrupt cannot be threaded * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device -- cgit v1.2.3 From a38bb793eaebe1178fbd8ef6ab66ccc062bad505 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 25 Feb 2015 10:23:58 +0200 Subject: OMAPDSS: fix regression with display sysfs files omapdss's sysfs directories for displays used to have 'name' file, giving the name for the display. This file was later renamed to 'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like at least xserver-xorg-video-omap3 requires the 'name' file to be present. To fix the regression, this patch creates new kobjects for each display, allowing us to create sysfs directories for the displays. This way we have the whole directory for omapdss, and there will be no sysfs file clashes with the underlying display device's sysfs files. We can thus add the 'name' sysfs file back. Signed-off-by: Tomi Valkeinen Tested-by: NeilBrown --- include/video/omapdss.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 60de61fea8e3..c8ed15daad02 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -689,6 +689,7 @@ struct omapdss_dsi_ops { }; struct omap_dss_device { + struct kobject kobj; struct device *dev; struct module *owner; -- cgit v1.2.3 From bc4b1f486fe69b86769e07c8edce472327a8462b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 15 Feb 2015 11:57:53 +0700 Subject: Revert "USB: serial: make bulk_out_size a lower limit" This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" Cc: stable # v3.15 Signed-off-by: Johan Hovold --- include/linux/usb/serial.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 9bb547c7bce7..704a1ab8240c 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -190,8 +190,7 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * @num_ports: the number of different ports this device will have. * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer * (0 = end-point size) - * @bulk_out_size: minimum number of bytes to allocate for bulk-out buffer - * (0 = end-point size) + * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It will be called after the probe() * callback is called, but before attach() -- cgit v1.2.3 From 140e049c64ce848392adbf4678983ecc76888dde Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 26 Feb 2015 17:42:42 -0500 Subject: NFS: Add a helper to set attribute barriers Signed-off-by: Trond Myklebust Tested-by: Chuck Lever --- include/linux/nfs_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 2f77e0c651c8..3a4ffb5856cd 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -369,6 +369,7 @@ extern struct nfs_lock_context *nfs_get_lock_context(struct nfs_open_context *ct extern void nfs_put_lock_context(struct nfs_lock_context *l_ctx); extern u64 nfs_compat_user_ino64(u64 fileid); extern void nfs_fattr_init(struct nfs_fattr *fattr); +extern void nfs_fattr_set_barrier(struct nfs_fattr *fattr); extern unsigned long nfs_inc_attr_generation_counter(void); extern struct nfs_fattr *nfs_alloc_fattr(void); -- cgit v1.2.3 From f044636d972246d451e06226cc1675d5da389762 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 26 Feb 2015 16:09:04 -0500 Subject: NFS: Add attribute update barriers to nfs_setattr_update_inode() Ensure that other operations which raced with our setattr RPC call cannot revert the file attribute changes that were made on the server. To do so, we artificially bump the attribute generation counter on the inode so that all calls to nfs_fattr_init() that precede ours will be dropped. The motivation for the patch came from Chuck Lever's reports of readaheads racing with truncate operations and causing the file size to be reverted. Reported-by: Chuck Lever Signed-off-by: Trond Myklebust Tested-by: Chuck Lever --- include/linux/nfs_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 3a4ffb5856cd..f26e64e0aff8 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -356,7 +356,7 @@ extern int nfs_revalidate_inode_rcu(struct nfs_server *server, struct inode *ino extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *); extern int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping); extern int nfs_setattr(struct dentry *, struct iattr *); -extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr); +extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr, struct nfs_fattr *); extern void nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, struct nfs4_label *label); extern struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx); -- cgit v1.2.3 From a08a8cd375db9769588257e7782f6b6b68561b88 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 26 Feb 2015 17:36:09 -0500 Subject: NFS: Add attribute update barriers to NFS writebacks Ensure that other operations that race with our write RPC calls cannot revert the file size updates that were made on the server. Signed-off-by: Trond Myklebust Tested-by: Chuck Lever --- include/linux/nfs_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index f26e64e0aff8..59b1516b9fd4 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -343,6 +343,7 @@ extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *, extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *); extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr); extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr); +extern int nfs_post_op_update_inode_force_wcc_locked(struct inode *inode, struct nfs_fattr *fattr); extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *); extern void nfs_access_add_cache(struct inode *, struct nfs_access_entry *); extern void nfs_access_set_mask(struct nfs_access_entry *, u32); -- cgit v1.2.3 From c6331ba3d2d68758f36dbc3e09e648d312c24d97 Mon Sep 17 00:00:00 2001 From: Marcin Bis Date: Sun, 1 Mar 2015 13:49:32 +0100 Subject: spi: fix a typo in comment. alway -> always Signed-off-by: Marcin Bis Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index ed9489d893a4..856d34dde79b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -649,7 +649,7 @@ struct spi_transfer { * sequence completes. On some systems, many such sequences can execute as * as single programmed DMA transfer. On all systems, these messages are * queued, and might complete after transactions to other devices. Messages - * sent to a given spi_device are alway executed in FIFO order. + * sent to a given spi_device are always executed in FIFO order. * * The code that submits an spi_message (and its spi_transfers) * to the lower layers is responsible for managing its memory. -- cgit v1.2.3 From 874f946376de57c8d6230b30ad71f742883fee3a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 2 Mar 2015 23:32:08 -0500 Subject: NFS: Fix a regression in the read() syscall When invalidating the page cache for a regular file, we want to first sync all dirty data to disk and then call invalidate_inode_pages2(). The latter relies on nfs_launder_page() and nfs_release_page() to deal respectively with dirty pages, and unstable written pages. When commit 9590544694bec ("NFS: avoid deadlocks with loop-back mounted NFS filesystems.") changed the behaviour of nfs_release_page(), then it made it possible for invalidate_inode_pages2() to fail with an EBUSY. Unfortunately, that error is then propagated back to read(). Let's therefore work around the problem for now by protecting the call to sync the data and invalidate_inode_pages2() so that they are atomic w.r.t. the addition of new writes. Later on, we can revisit whether or not we still need nfs_launder_page() and nfs_release_page(). Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 59b1516b9fd4..b01ccf371fdc 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -356,6 +356,7 @@ extern int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode); extern int nfs_revalidate_inode_rcu(struct nfs_server *server, struct inode *inode); extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *); extern int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping); +extern int nfs_revalidate_mapping_protected(struct inode *inode, struct address_space *mapping); extern int nfs_setattr(struct dentry *, struct iattr *); extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr, struct nfs_fattr *); extern void nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, -- cgit v1.2.3 From 86f1ec32318159a24de349f0a38e79b9d2b3131a Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 3 Mar 2015 20:04:20 +0000 Subject: netfilter: nf_tables: fix userdata length overflow The NFT_USERDATA_MAXLEN is defined to 256, however we only have a u8 to store its size. Introduce a struct nft_userdata which contains a length field and indicate its presence using a single bit in the rule. The length field of struct nft_userdata is also a u8, however we don't store zero sized data, so the actual length is udata->len + 1. Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 9eaaa7884586..decb9a095ae7 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -119,6 +119,22 @@ int nft_validate_data_load(const struct nft_ctx *ctx, enum nft_registers reg, const struct nft_data *data, enum nft_data_types type); + +/** + * struct nft_userdata - user defined data associated with an object + * + * @len: length of the data + * @data: content + * + * The presence of user data is indicated in an object specific fashion, + * so a length of zero can't occur and the value "len" indicates data + * of length len + 1. + */ +struct nft_userdata { + u8 len; + unsigned char data[0]; +}; + /** * struct nft_set_elem - generic representation of set elements * @@ -380,7 +396,7 @@ static inline void *nft_expr_priv(const struct nft_expr *expr) * @handle: rule handle * @genmask: generation mask * @dlen: length of expression data - * @ulen: length of user data (used for comments) + * @udata: user data is appended to the rule * @data: expression data */ struct nft_rule { @@ -388,7 +404,7 @@ struct nft_rule { u64 handle:42, genmask:2, dlen:12, - ulen:8; + udata:1; unsigned char data[] __attribute__((aligned(__alignof__(struct nft_expr)))); }; @@ -476,7 +492,7 @@ static inline struct nft_expr *nft_expr_last(const struct nft_rule *rule) return (struct nft_expr *)&rule->data[rule->dlen]; } -static inline void *nft_userdata(const struct nft_rule *rule) +static inline struct nft_userdata *nft_userdata(const struct nft_rule *rule) { return (void *)&rule->data[rule->dlen]; } -- cgit v1.2.3 From 17f480342026e54000731acaa69bf32787ce46cb Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 27 Feb 2015 00:07:55 +0100 Subject: genirq / PM: Add flag for shared NO_SUSPEND interrupt lines It currently is required that all users of NO_SUSPEND interrupt lines pass the IRQF_NO_SUSPEND flag when requesting the IRQ or the WARN_ON_ONCE() in irq_pm_install_action() will trigger. That is done to warn about situations in which unprepared interrupt handlers may be run unnecessarily for suspended devices and may attempt to access those devices by mistake. However, it may cause drivers that have no technical reasons for using IRQF_NO_SUSPEND to set that flag just because they happen to share the interrupt line with something like a timer. Moreover, the generic handling of wakeup interrupts introduced by commit 9ce7a25849e8 (genirq: Simplify wakeup mechanism) only works for IRQs without any NO_SUSPEND users, so the drivers of wakeup devices needing to use shared NO_SUSPEND interrupt lines for signaling system wakeup generally have to detect wakeup in their interrupt handlers. Thus if they happen to share an interrupt line with a NO_SUSPEND user, they also need to request that their interrupt handlers be run after suspend_device_irqs(). In both cases the reason for using IRQF_NO_SUSPEND is not because the driver in question has a genuine need to run its interrupt handler after suspend_device_irqs(), but because it happens to share the line with some other NO_SUSPEND user. Otherwise, the driver would do without IRQF_NO_SUSPEND just fine. To make it possible to specify that condition explicitly, introduce a new IRQ action handler flag for shared IRQs, IRQF_COND_SUSPEND, that, when set, will indicate to the IRQ core that the interrupt user is generally fine with suspending the IRQ, but it also can tolerate handler invocations after suspend_device_irqs() and, in particular, it is capable of detecting system wakeup and triggering it as appropriate from its interrupt handler. That will allow us to work around a problem with a shared timer interrupt line on at91 platforms. Link: http://marc.info/?l=linux-kernel&m=142252777602084&w=2 Link: http://marc.info/?t=142252775300011&r=1&w=2 Link: https://lkml.org/lkml/2014/12/15/552 Reported-by: Boris Brezillon Signed-off-by: Rafael J. Wysocki Acked-by: Peter Zijlstra (Intel) Acked-by: Mark Rutland --- include/linux/interrupt.h | 5 +++++ include/linux/irqdesc.h | 1 + 2 files changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 606771c7cac2..2e88580194f0 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -59,6 +59,10 @@ * IRQF_NO_THREAD - Interrupt cannot be threaded * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device * resume time. + * IRQF_COND_SUSPEND - If the IRQ is shared with a NO_SUSPEND user, execute this + * interrupt handler after suspending interrupts. For system + * wakeup devices users need to implement wakeup detection in + * their interrupt handlers. */ #define IRQF_DISABLED 0x00000020 #define IRQF_SHARED 0x00000080 @@ -72,6 +76,7 @@ #define IRQF_FORCE_RESUME 0x00008000 #define IRQF_NO_THREAD 0x00010000 #define IRQF_EARLY_RESUME 0x00020000 +#define IRQF_COND_SUSPEND 0x00040000 #define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD) diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index faf433af425e..dd1109fb241e 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -78,6 +78,7 @@ struct irq_desc { #ifdef CONFIG_PM_SLEEP unsigned int nr_actions; unsigned int no_suspend_depth; + unsigned int cond_suspend_depth; unsigned int force_resume_depth; #endif #ifdef CONFIG_PROC_FS -- cgit v1.2.3 From 440fd5283a87345cdd4237bdf45fb01130ea0056 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 23 Jan 2015 09:05:06 +0100 Subject: drm/mm: Support 4 GiB and larger ranges The current implementation is limited by the number of addresses that fit into an unsigned long. This causes problems on 32-bit Tegra where unsigned long is 32-bit but drm_mm is used to manage an IOVA space of 4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1 (or 4 GiB - 4 KiB for page granularity). This commit changes the start and size of the range to be an unsigned 64-bit integer, thus allowing much larger ranges to be supported. [airlied: fix i915 warnings and coloring callback] Signed-off-by: Thierry Reding Reviewed-by: Alex Deucher Reviewed-by: Chris Wilson Signed-off-by: Dave Airlie fixupo --- include/drm/drm_mm.h | 52 ++++++++++++++++++++++++++-------------------------- 1 file changed, 26 insertions(+), 26 deletions(-) (limited to 'include') diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h index a24addfdfcec..0de6290df4da 100644 --- a/include/drm/drm_mm.h +++ b/include/drm/drm_mm.h @@ -68,8 +68,8 @@ struct drm_mm_node { unsigned scanned_preceeds_hole : 1; unsigned allocated : 1; unsigned long color; - unsigned long start; - unsigned long size; + u64 start; + u64 size; struct drm_mm *mm; }; @@ -82,16 +82,16 @@ struct drm_mm { unsigned int scan_check_range : 1; unsigned scan_alignment; unsigned long scan_color; - unsigned long scan_size; - unsigned long scan_hit_start; - unsigned long scan_hit_end; + u64 scan_size; + u64 scan_hit_start; + u64 scan_hit_end; unsigned scanned_blocks; - unsigned long scan_start; - unsigned long scan_end; + u64 scan_start; + u64 scan_end; struct drm_mm_node *prev_scanned_node; void (*color_adjust)(struct drm_mm_node *node, unsigned long color, - unsigned long *start, unsigned long *end); + u64 *start, u64 *end); }; /** @@ -124,7 +124,7 @@ static inline bool drm_mm_initialized(struct drm_mm *mm) return mm->hole_stack.next; } -static inline unsigned long __drm_mm_hole_node_start(struct drm_mm_node *hole_node) +static inline u64 __drm_mm_hole_node_start(struct drm_mm_node *hole_node) { return hole_node->start + hole_node->size; } @@ -140,13 +140,13 @@ static inline unsigned long __drm_mm_hole_node_start(struct drm_mm_node *hole_no * Returns: * Start of the subsequent hole. */ -static inline unsigned long drm_mm_hole_node_start(struct drm_mm_node *hole_node) +static inline u64 drm_mm_hole_node_start(struct drm_mm_node *hole_node) { BUG_ON(!hole_node->hole_follows); return __drm_mm_hole_node_start(hole_node); } -static inline unsigned long __drm_mm_hole_node_end(struct drm_mm_node *hole_node) +static inline u64 __drm_mm_hole_node_end(struct drm_mm_node *hole_node) { return list_entry(hole_node->node_list.next, struct drm_mm_node, node_list)->start; @@ -163,7 +163,7 @@ static inline unsigned long __drm_mm_hole_node_end(struct drm_mm_node *hole_node * Returns: * End of the subsequent hole. */ -static inline unsigned long drm_mm_hole_node_end(struct drm_mm_node *hole_node) +static inline u64 drm_mm_hole_node_end(struct drm_mm_node *hole_node) { return __drm_mm_hole_node_end(hole_node); } @@ -222,7 +222,7 @@ int drm_mm_reserve_node(struct drm_mm *mm, struct drm_mm_node *node); int drm_mm_insert_node_generic(struct drm_mm *mm, struct drm_mm_node *node, - unsigned long size, + u64 size, unsigned alignment, unsigned long color, enum drm_mm_search_flags sflags, @@ -245,7 +245,7 @@ int drm_mm_insert_node_generic(struct drm_mm *mm, */ static inline int drm_mm_insert_node(struct drm_mm *mm, struct drm_mm_node *node, - unsigned long size, + u64 size, unsigned alignment, enum drm_mm_search_flags flags) { @@ -255,11 +255,11 @@ static inline int drm_mm_insert_node(struct drm_mm *mm, int drm_mm_insert_node_in_range_generic(struct drm_mm *mm, struct drm_mm_node *node, - unsigned long size, + u64 size, unsigned alignment, unsigned long color, - unsigned long start, - unsigned long end, + u64 start, + u64 end, enum drm_mm_search_flags sflags, enum drm_mm_allocator_flags aflags); /** @@ -282,10 +282,10 @@ int drm_mm_insert_node_in_range_generic(struct drm_mm *mm, */ static inline int drm_mm_insert_node_in_range(struct drm_mm *mm, struct drm_mm_node *node, - unsigned long size, + u64 size, unsigned alignment, - unsigned long start, - unsigned long end, + u64 start, + u64 end, enum drm_mm_search_flags flags) { return drm_mm_insert_node_in_range_generic(mm, node, size, alignment, @@ -296,21 +296,21 @@ static inline int drm_mm_insert_node_in_range(struct drm_mm *mm, void drm_mm_remove_node(struct drm_mm_node *node); void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new); void drm_mm_init(struct drm_mm *mm, - unsigned long start, - unsigned long size); + u64 start, + u64 size); void drm_mm_takedown(struct drm_mm *mm); bool drm_mm_clean(struct drm_mm *mm); void drm_mm_init_scan(struct drm_mm *mm, - unsigned long size, + u64 size, unsigned alignment, unsigned long color); void drm_mm_init_scan_with_range(struct drm_mm *mm, - unsigned long size, + u64 size, unsigned alignment, unsigned long color, - unsigned long start, - unsigned long end); + u64 start, + u64 end); bool drm_mm_scan_add_block(struct drm_mm_node *node); bool drm_mm_scan_remove_block(struct drm_mm_node *node); -- cgit v1.2.3 From 54c4cd68ed7abd9f245722bee39464d04ddb4cfd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 4 Mar 2015 00:18:38 -0500 Subject: drm/ttm: device address space != CPU address space We need to store device offsets in 64 bit as the device address space may be larger than the CPU's. Fixes GPU init failures on radeons with 4GB or more of vram on 32 bit kernels. We put vram at the start of the GPU's address space so the gart aperture starts at 4 GB causing all GPU addresses in the gart aperture to get truncated. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89072 [airlied: fix warning on nouveau build] Signed-off-by: Alex Deucher Cc: thellstrom@vmware.com Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- include/drm/ttm/ttm_bo_api.h | 2 +- include/drm/ttm/ttm_bo_driver.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index 0ccf7f267ff9..c768ddfbe53c 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -249,7 +249,7 @@ struct ttm_buffer_object { * either of these locks held. */ - unsigned long offset; + uint64_t offset; /* GPU address space is independent of CPU word size */ uint32_t cur_placement; struct sg_table *sg; diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index 142d752fc450..813042cede57 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -277,7 +277,7 @@ struct ttm_mem_type_manager { bool has_type; bool use_type; uint32_t flags; - unsigned long gpu_offset; + uint64_t gpu_offset; /* GPU address space is independent of CPU word size */ uint64_t size; uint32_t available_caching; uint32_t default_caching; -- cgit v1.2.3 From 8603e1b30027f943cc9c1eef2b291d42c3347af1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 5 Mar 2015 08:04:13 -0500 Subject: workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE cancel[_delayed]_work_sync() are implemented using __cancel_work_timer() which grabs the PENDING bit using try_to_grab_pending() and then flushes the work item with PENDING set to prevent the on-going execution of the work item from requeueing itself. try_to_grab_pending() can always grab PENDING bit without blocking except when someone else is doing the above flushing during cancelation. In that case, try_to_grab_pending() returns -ENOENT. In this case, __cancel_work_timer() currently invokes flush_work(). The assumption is that the completion of the work item is what the other canceling task would be waiting for too and thus waiting for the same condition and retrying should allow forward progress without excessive busy looping Unfortunately, this doesn't work if preemption is disabled or the latter task has real time priority. Let's say task A just got woken up from flush_work() by the completion of the target work item. If, before task A starts executing, task B gets scheduled and invokes __cancel_work_timer() on the same work item, its try_to_grab_pending() will return -ENOENT as the work item is still being canceled by task A and flush_work() will also immediately return false as the work item is no longer executing. This puts task B in a busy loop possibly preventing task A from executing and clearing the canceling state on the work item leading to a hang. task A task B worker executing work __cancel_work_timer() try_to_grab_pending() set work CANCELING flush_work() block for work completion completion, wakes up A __cancel_work_timer() while (forever) { try_to_grab_pending() -ENOENT as work is being canceled flush_work() false as work is no longer executing } This patch removes the possible hang by updating __cancel_work_timer() to explicitly wait for clearing of CANCELING rather than invoking flush_work() after try_to_grab_pending() fails with -ENOENT. Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com v3: bit_waitqueue() can't be used for work items defined in vmalloc area. Switched to custom wake function which matches the target work item and exclusive wait and wakeup. v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if the target bit waitqueue has wait_bit_queue's on it. Use DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu Vizoso. Signed-off-by: Tejun Heo Reported-by: Rabin Vincent Cc: Tomeu Vizoso Cc: stable@vger.kernel.org Tested-by: Jesper Nilsson Tested-by: Rabin Vincent --- include/linux/workqueue.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 74db135f9957..f597846ff605 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -70,7 +70,8 @@ enum { /* data contains off-queue information when !WORK_STRUCT_PWQ */ WORK_OFFQ_FLAG_BASE = WORK_STRUCT_COLOR_SHIFT, - WORK_OFFQ_CANCELING = (1 << WORK_OFFQ_FLAG_BASE), + __WORK_OFFQ_CANCELING = WORK_OFFQ_FLAG_BASE, + WORK_OFFQ_CANCELING = (1 << __WORK_OFFQ_CANCELING), /* * When a work item is off queue, its high bits point to the last -- cgit v1.2.3 From ef2b22ac540c018bd574d1846ab95b9bfcf38702 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 2 Mar 2015 22:26:55 +0100 Subject: cpuidle / sleep: Use broadcast timer for states that stop local timer Commit 381063133246 (PM / sleep: Re-implement suspend-to-idle handling) overlooked the fact that entering some sufficiently deep idle states by CPUs may cause their local timers to stop and in those cases it is necessary to switch over to a broadcast timer prior to entering the idle state. If the cpuidle driver in use does not provide the new ->enter_freeze callback for any of the idle states, that problem affects suspend-to-idle too, but it is not taken into account after the changes made by commit 381063133246. Fix that by changing the definition of cpuidle_enter_freeze() and re-arranging of the code in cpuidle_idle_call(), so the former does not call cpuidle_enter() any more and the fallback case is handled by cpuidle_idle_call() directly. Fixes: 381063133246 (PM / sleep: Re-implement suspend-to-idle handling) Reported-and-tested-by: Lorenzo Pieralisi Signed-off-by: Rafael J. Wysocki Acked-by: Peter Zijlstra (Intel) --- include/linux/cpuidle.h | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index f551a9299ac9..306178d7309f 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -126,6 +126,8 @@ struct cpuidle_driver { #ifdef CONFIG_CPU_IDLE extern void disable_cpuidle(void); +extern bool cpuidle_not_available(struct cpuidle_driver *drv, + struct cpuidle_device *dev); extern int cpuidle_select(struct cpuidle_driver *drv, struct cpuidle_device *dev); @@ -150,11 +152,17 @@ extern void cpuidle_resume(void); extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); extern int cpuidle_play_dead(void); -extern void cpuidle_enter_freeze(void); +extern int cpuidle_find_deepest_state(struct cpuidle_driver *drv, + struct cpuidle_device *dev); +extern int cpuidle_enter_freeze(struct cpuidle_driver *drv, + struct cpuidle_device *dev); extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev); #else static inline void disable_cpuidle(void) { } +static inline bool cpuidle_not_available(struct cpuidle_driver *drv, + struct cpuidle_device *dev) +{return true; } static inline int cpuidle_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) {return -ENODEV; } @@ -183,7 +191,12 @@ static inline int cpuidle_enable_device(struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_disable_device(struct cpuidle_device *dev) { } static inline int cpuidle_play_dead(void) {return -ENODEV; } -static inline void cpuidle_enter_freeze(void) { } +static inline int cpuidle_find_deepest_state(struct cpuidle_driver *drv, + struct cpuidle_device *dev) +{return -ENODEV; } +static inline int cpuidle_enter_freeze(struct cpuidle_driver *drv, + struct cpuidle_device *dev) +{return -ENODEV; } static inline struct cpuidle_driver *cpuidle_get_cpu_driver( struct cpuidle_device *dev) {return NULL; } #endif -- cgit v1.2.3 From 2bb785169e9709d41220e5c18b0270883a82f85c Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 1 Mar 2015 10:18:16 -0500 Subject: serial: core: Fix iotype userspace breakage commit 3ffb1a8193bea ("serial: core: Add big-endian iotype") re-numbered userspace-dependent values; ioctl(TIOCSSERIAL) can assign the port iotype (which is expected to match the selected i/o accessors), so iotype values must not be changed. Cc: Kevin Cernekee Cc: # 3.19+ Signed-off-by: Peter Hurley Reviewed-by: Kevin Cernekee Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index baf3e1d08416..1094f2d9cadb 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -147,9 +147,9 @@ struct uart_port { #define UPIO_HUB6 (1) /* Hub6 ISA card */ #define UPIO_MEM (2) /* 8b MMIO access */ #define UPIO_MEM32 (3) /* 32b little endian */ -#define UPIO_MEM32BE (4) /* 32b big endian */ -#define UPIO_AU (5) /* Au1x00 and RT288x type IO */ -#define UPIO_TSI (6) /* Tsi108/109 type IO */ +#define UPIO_AU (4) /* Au1x00 and RT288x type IO */ +#define UPIO_TSI (5) /* Tsi108/109 type IO */ +#define UPIO_MEM32BE (6) /* 32b big endian */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ -- cgit v1.2.3 From 647f162b8e7e446c4bade031eb8a1a0a83d3de82 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 1 Mar 2015 10:24:28 -0500 Subject: serial: uapi: Declare all userspace-visible io types ioctl(TIOCGSERIAL|TIOCSSERIAL) report and can change the port->iotype. UART drivers use the UPIO_* definitions, but the uapi header defines parallel values and userspace uses these parallel values for ioctls; thus the userspace values are definitive. Define UPIO_* iotypes in terms of the uapi defines, SERIAL_IO_*; extend the uapi defines to include all values in use by the serial core. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 14 +++++++------- include/uapi/linux/serial.h | 4 ++++ 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 1094f2d9cadb..d10965f0d8a4 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -143,13 +143,13 @@ struct uart_port { unsigned char iotype; /* io access style */ unsigned char unused1; -#define UPIO_PORT (0) /* 8b I/O port access */ -#define UPIO_HUB6 (1) /* Hub6 ISA card */ -#define UPIO_MEM (2) /* 8b MMIO access */ -#define UPIO_MEM32 (3) /* 32b little endian */ -#define UPIO_AU (4) /* Au1x00 and RT288x type IO */ -#define UPIO_TSI (5) /* Tsi108/109 type IO */ -#define UPIO_MEM32BE (6) /* 32b big endian */ +#define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */ +#define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */ +#define UPIO_MEM (SERIAL_IO_MEM) /* 8b MMIO access */ +#define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */ +#define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ +#define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ +#define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index 5e0d0ed61cf3..25331f9faa76 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -65,6 +65,10 @@ struct serial_struct { #define SERIAL_IO_PORT 0 #define SERIAL_IO_HUB6 1 #define SERIAL_IO_MEM 2 +#define SERIAL_IO_MEM32 3 +#define SERIAL_IO_AU 4 +#define SERIAL_IO_TSI 5 +#define SERIAL_IO_MEM32BE 6 #define UART_CLEAR_FIFO 0x01 #define UART_USE_FIFO 0x02 -- cgit v1.2.3