From 2c67568903d6ae1b8cfa343c649029180239418e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Aug 2014 13:02:36 +0200 Subject: spi: Add missing kerneldoc bits These are all arguments or fields that got added without updating the kerneldoc comments. Signed-off-by: Thierry Reding Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e713543336f1..46d188a9947c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -253,6 +253,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * the device whose settings are being modified. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state + * @can_dma: determine whether this master supports DMA * @queued: whether this master is providing an internal message queue * @kworker: thread struct for message pump * @kworker_task: pointer to task for message pump kworker thread @@ -262,6 +263,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message + * @cur_msg_mapped: message has been mapped for DMA * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running @@ -299,6 +301,10 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). + * @dma_tx: DMA transmit channel + * @dma_rx: DMA receive channel + * @dummy_rx: dummy receive buffer for full-duplex devices + * @dummy_tx: dummy transmit buffer for full-duplex devices * * Each SPI master controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals @@ -632,6 +638,7 @@ struct spi_transfer { * addresses for each transfer buffer * @complete: called to report transaction completions * @context: the argument to complete() when it's called + * @frame_length: the total number of bytes in the message * @actual_length: the total number of bytes that were transferred in all * successful segments * @status: zero for success, else negative errno -- cgit v1.2.3 From 8a58d1f1f373238cb0d6d7f8d3dd723aa164b8ac Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 15 Aug 2014 12:38:41 -0600 Subject: blk-mq: get rid of unused BLK_MQ_F_SHOULD_SORT flag We used to use this for determining whether to sort the dispatch list, but it's unused now. Signed-off-by: Jens Axboe --- include/linux/blk-mq.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index eb726b9c5762..a1e31f274fcd 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -127,10 +127,9 @@ enum { BLK_MQ_RQ_QUEUE_ERROR = 2, /* end IO with error */ BLK_MQ_F_SHOULD_MERGE = 1 << 0, - BLK_MQ_F_SHOULD_SORT = 1 << 1, - BLK_MQ_F_TAG_SHARED = 1 << 2, - BLK_MQ_F_SG_MERGE = 1 << 3, - BLK_MQ_F_SYSFS_UP = 1 << 4, + BLK_MQ_F_TAG_SHARED = 1 << 1, + BLK_MQ_F_SG_MERGE = 1 << 2, + BLK_MQ_F_SYSFS_UP = 1 << 3, BLK_MQ_S_STOPPED = 0, BLK_MQ_S_TAG_ACTIVE = 1, -- cgit v1.2.3 From 96c2737716d586a218bc795fcb79d2e2b6003081 Mon Sep 17 00:00:00 2001 From: Valentina Manea Date: Wed, 20 Aug 2014 07:31:00 +0300 Subject: usbip: move usbip kernel code out of staging At this point, USB/IP kernel code is fully functional and can be moved out of staging. Signed-off-by: Valentina Manea Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/usbip.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/uapi/linux/usbip.h (limited to 'include') diff --git a/include/uapi/linux/usbip.h b/include/uapi/linux/usbip.h new file mode 100644 index 000000000000..fa5db30ede36 --- /dev/null +++ b/include/uapi/linux/usbip.h @@ -0,0 +1,26 @@ +/* + * usbip.h + * + * USBIP uapi defines and function prototypes etc. +*/ + +#ifndef _UAPI_LINUX_USBIP_H +#define _UAPI_LINUX_USBIP_H + +/* usbip device status - exported in usbip device sysfs status */ +enum usbip_device_status { + /* sdev is available. */ + SDEV_ST_AVAILABLE = 0x01, + /* sdev is now used. */ + SDEV_ST_USED, + /* sdev is unusable because of a fatal error. */ + SDEV_ST_ERROR, + + /* vdev does not connect a remote device. */ + VDEV_ST_NULL, + /* vdev is used, but the USB address is not assigned yet */ + VDEV_ST_NOTASSIGNED, + VDEV_ST_USED, + VDEV_ST_ERROR +}; +#endif /* _UAPI_LINUX_USBIP_H */ -- cgit v1.2.3 From 7d5929c1f34304ca5a970cfde8044053e56aa8c9 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 25 Aug 2014 16:15:32 -0700 Subject: mtd: nand: omap: Revert to using software ECC by default For v3.12 and prior, 1-bit Hamming code ECC via software was the default choice. Commit c66d039197e4 in v3.13 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.12 and prior to be unusable in v3.13 and later. So revert back to using software ECC by default if an ECC scheme is not explicitely specified. This defect can be observed on the following boards during legacy boot -omap3beagle -omap3touchbook -overo -am3517crane -devkit8000 -ldp -3430sdp Signed-off-by: Roger Quadros Tested-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- include/linux/platform_data/mtd-nand-omap2.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 660c029d694f..16ec262dfcc8 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -21,8 +21,17 @@ enum nand_io { }; enum omap_ecc { - /* 1-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_HAM1_CODE_HW = 0, + /* + * 1-bit ECC: calculation and correction by SW + * ECC stored at end of spare area + */ + OMAP_ECC_HAM1_CODE_SW = 0, + + /* + * 1-bit ECC: calculation by GPMC, Error detection by Software + * ECC layout compatible with ROM code layout + */ + OMAP_ECC_HAM1_CODE_HW, /* 4-bit ECC calculation by GPMC, Error detection by Software */ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, /* 4-bit ECC calculation by GPMC, Error detection by ELM */ -- cgit v1.2.3 From 1f58d9465c568eb47cab939bbc4f30ae51863295 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Aug 2014 13:06:30 +0200 Subject: dma-buf/fence: Fix one more kerneldoc warning The seqno_fence_init() function's cond argument isn't described in the kerneldoc comment. Fix that to silence a warning when building DocBook documentation. Signed-off-by: Thierry Reding Signed-off-by: Sumit Semwal --- include/linux/seqno-fence.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h index 3d6003de4b0d..a1ba6a5ccdd6 100644 --- a/include/linux/seqno-fence.h +++ b/include/linux/seqno-fence.h @@ -62,6 +62,7 @@ to_seqno_fence(struct fence *fence) * @context: the execution context this fence is a part of * @seqno_ofs: the offset within @sync_buf * @seqno: the sequence # to signal on + * @cond: fence wait condition * @ops: the fence_ops for operations on this seqno fence * * This function initializes a struct seqno_fence with passed parameters, -- cgit v1.2.3 From db9ee220361de03ee86388f9ea5e529eaad5323c Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 27 Aug 2014 18:40:07 -0400 Subject: jbd2: fix descriptor block size handling errors with journal_csum It turns out that there are some serious problems with the on-disk format of journal checksum v2. The foremost is that the function to calculate descriptor tag size returns sizes that are too big. This causes alignment issues on some architectures and is compounded by the fact that some parts of jbd2 use the structure size (incorrectly) to determine the presence of a 64bit journal instead of checking the feature flags. Therefore, introduce journal checksum v3, which enlarges the descriptor block tag format to allow for full 32-bit checksums of journal blocks, fix the journal tag function to return the correct sizes, and fix the jbd2 recovery code to use feature flags to determine 64bitness. Add a few function helpers so we don't have to open-code quite so many pieces. Switching to a 16-byte block size was found to increase journal size overhead by a maximum of 0.1%, to convert a 32-bit journal with no checksumming to a 32-bit journal with checksum v3 enabled. Signed-off-by: Darrick J. Wong Reported-by: TR Reardon Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- include/linux/jbd2.h | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index d5b50a19463c..0dae71e9971c 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -159,7 +159,11 @@ typedef struct journal_header_s * journal_block_tag (in the descriptor). The other h_chksum* fields are * not used. * - * Checksum v1 and v2 are mutually exclusive features. + * If FEATURE_INCOMPAT_CSUM_V3 is set, the descriptor block uses + * journal_block_tag3_t to store a full 32-bit checksum. Everything else + * is the same as v2. + * + * Checksum v1, v2, and v3 are mutually exclusive features. */ struct commit_header { __be32 h_magic; @@ -179,6 +183,14 @@ struct commit_header { * raw struct shouldn't be used for pointer math or sizeof() - use * journal_tag_bytes(journal) instead to compute this. */ +typedef struct journal_block_tag3_s +{ + __be32 t_blocknr; /* The on-disk block number */ + __be32 t_flags; /* See below */ + __be32 t_blocknr_high; /* most-significant high 32bits. */ + __be32 t_checksum; /* crc32c(uuid+seq+block) */ +} journal_block_tag3_t; + typedef struct journal_block_tag_s { __be32 t_blocknr; /* The on-disk block number */ @@ -187,9 +199,6 @@ typedef struct journal_block_tag_s __be32 t_blocknr_high; /* most-significant high 32bits. */ } journal_block_tag_t; -#define JBD2_TAG_SIZE32 (offsetof(journal_block_tag_t, t_blocknr_high)) -#define JBD2_TAG_SIZE64 (sizeof(journal_block_tag_t)) - /* Tail of descriptor block, for checksumming */ struct jbd2_journal_block_tail { __be32 t_checksum; /* crc32c(uuid+descr_block) */ @@ -284,6 +293,7 @@ typedef struct journal_superblock_s #define JBD2_FEATURE_INCOMPAT_64BIT 0x00000002 #define JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT 0x00000004 #define JBD2_FEATURE_INCOMPAT_CSUM_V2 0x00000008 +#define JBD2_FEATURE_INCOMPAT_CSUM_V3 0x00000010 /* Features known to this kernel version: */ #define JBD2_KNOWN_COMPAT_FEATURES JBD2_FEATURE_COMPAT_CHECKSUM @@ -291,7 +301,8 @@ typedef struct journal_superblock_s #define JBD2_KNOWN_INCOMPAT_FEATURES (JBD2_FEATURE_INCOMPAT_REVOKE | \ JBD2_FEATURE_INCOMPAT_64BIT | \ JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT | \ - JBD2_FEATURE_INCOMPAT_CSUM_V2) + JBD2_FEATURE_INCOMPAT_CSUM_V2 | \ + JBD2_FEATURE_INCOMPAT_CSUM_V3) #ifdef __KERNEL__ @@ -1296,6 +1307,15 @@ static inline int tid_geq(tid_t x, tid_t y) extern int jbd2_journal_blocks_per_page(struct inode *inode); extern size_t journal_tag_bytes(journal_t *journal); +static inline int jbd2_journal_has_csum_v2or3(journal_t *journal) +{ + if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2) || + JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3)) + return 1; + + return 0; +} + /* * We reserve t_outstanding_credits >> JBD2_CONTROL_BLOCKS_SHIFT for * transaction control blocks. -- cgit v1.2.3 From bfcfd44cce2774f19daeb59fb4e43fc9aa80e7b8 Mon Sep 17 00:00:00 2001 From: Filipe Brandenburger Date: Fri, 29 Aug 2014 15:18:51 -0700 Subject: xattr: fix check for simultaneous glibc header inclusion The guard was introduced in commit ea1a8217b06b ("xattr: guard against simultaneous glibc header inclusion") but it is using #ifdef to check for a define that is either set to 1 or 0. Fix it to use #if instead. * Without this patch: $ { echo "#include "; echo "#include "; } | gcc -E -Iinclude/uapi - >/dev/null include/uapi/linux/xattr.h:19:0: warning: "XATTR_CREATE" redefined [enabled by default] #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ ^ /usr/include/x86_64-linux-gnu/sys/xattr.h:32:0: note: this is the location of the previous definition #define XATTR_CREATE XATTR_CREATE ^ * With this patch: $ { echo "#include "; echo "#include "; } | gcc -E -Iinclude/uapi - >/dev/null (no warnings) Signed-off-by: Filipe Brandenburger Acked-by: Serge E. Hallyn Cc: Allan McRae Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/uapi/linux/xattr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h index c38355c1f3c9..1590c49cae57 100644 --- a/include/uapi/linux/xattr.h +++ b/include/uapi/linux/xattr.h @@ -13,7 +13,7 @@ #ifndef _UAPI_LINUX_XATTR_H #define _UAPI_LINUX_XATTR_H -#ifdef __UAPI_DEF_XATTR +#if __UAPI_DEF_XATTR #define __USE_KERNEL_XATTR_DEFS #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ -- cgit v1.2.3