From df78a0c0b67de58934877aad61e0431a2bd0caf1 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 1 Jun 2020 23:22:47 -0700 Subject: nl80211: S1G band and channel definitions Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 17 +++++++++++++++++ include/uapi/linux/nl80211.h | 16 ++++++++++++++++ 2 files changed, 33 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fc7e8807838d..ac6e58193426 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -417,6 +417,22 @@ struct ieee80211_edmg { enum ieee80211_edmg_bw_config bw_config; }; +/** + * struct ieee80211_sta_s1g_cap - STA's S1G capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11ah S1G capabilities for a STA. + * + * @s1g_supported: is STA an S1G STA + * @cap: S1G capabilities information + * @nss_mcs: Supported NSS MCS set + */ +struct ieee80211_sta_s1g_cap { + bool s1g; + u8 cap[10]; /* use S1G_CAPAB_ */ + u8 nss_mcs[5]; +}; + /** * struct ieee80211_supported_band - frequency band definition * @@ -448,6 +464,7 @@ struct ieee80211_supported_band { int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; struct ieee80211_sta_vht_cap vht_cap; + struct ieee80211_sta_s1g_cap s1g_cap; struct ieee80211_edmg edmg_cap; u16 n_iftype_data; const struct ieee80211_sband_iftype_data *iftype_data; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 4e6339ab1fce..ad183469f9af 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4437,6 +4437,11 @@ enum nl80211_key_mode { * attribute must be provided as well * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel + * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel + * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel + * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel + * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel + * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -4447,6 +4452,11 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_160, NL80211_CHAN_WIDTH_5, NL80211_CHAN_WIDTH_10, + NL80211_CHAN_WIDTH_1, + NL80211_CHAN_WIDTH_2, + NL80211_CHAN_WIDTH_4, + NL80211_CHAN_WIDTH_8, + NL80211_CHAN_WIDTH_16, }; /** @@ -4457,11 +4467,15 @@ enum nl80211_chan_width { * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide + * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide */ enum nl80211_bss_scan_width { NL80211_BSS_CHAN_WIDTH_20, NL80211_BSS_CHAN_WIDTH_10, NL80211_BSS_CHAN_WIDTH_5, + NL80211_BSS_CHAN_WIDTH_1, + NL80211_BSS_CHAN_WIDTH_2, }; /** @@ -4740,6 +4754,7 @@ enum nl80211_txrate_gi { * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace * since newer kernel versions may support more bands */ @@ -4748,6 +4763,7 @@ enum nl80211_band { NL80211_BAND_5GHZ, NL80211_BAND_60GHZ, NL80211_BAND_6GHZ, + NL80211_BAND_S1GHZ, NUM_NL80211_BANDS, }; -- cgit v1.2.3 From 987021726f9f41a1daf335c57cd7b6261109cdb2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Jul 2020 09:43:21 -0700 Subject: net/wireless: nl80211.h: drop duplicate words in comments Drop doubled words in several comments. Signed-off-by: Randy Dunlap Cc: netdev@vger.kernel.org Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg Link: https://lore.kernel.org/r/20200715164325.9109-1-rdunlap@infradead.org Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ad183469f9af..f47a7a8d0216 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -363,7 +363,7 @@ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. + * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and @@ -383,7 +383,7 @@ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by * %NL80211_ATTR_MAC. * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. + * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC * or, if no MAC address given, all mesh paths, on the interface identified * by %NL80211_ATTR_IFINDEX. @@ -934,7 +934,7 @@ * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. * * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the - * the new channel information (Channel Switch Announcement - CSA) + * new channel information (Channel Switch Announcement - CSA) * in the beacon for some time (as defined in the * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the * new channel. Userspace provides the new channel information (using @@ -1113,7 +1113,7 @@ * randomization may be enabled and configured by specifying the * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. - * A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in + * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in * the netlink extended ack message. * * To cancel a measurement, close the socket that requested it. @@ -1511,7 +1511,7 @@ enum nl80211_commands { * rates as defined by IEEE 802.11 7.3.2.2 but without the length * restriction (at most %NL80211_MAX_SUPP_RATES). * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station - * to, or the AP interface the station was originally added to to. + * to, or the AP interface the station was originally added to. * @NL80211_ATTR_STA_INFO: information about a station, part of station info * given for %NL80211_CMD_GET_STATION, nested attribute containing * info as possible, see &enum nl80211_sta_info. @@ -2084,7 +2084,7 @@ enum nl80211_commands { * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. * * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported - * supported operating classes. + * operating classes. * * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space * controls DFS operation in IBSS mode. If the flag is included in @@ -2395,7 +2395,7 @@ enum nl80211_commands { * nl80211_txq_stats) * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. * The smaller of this and the memory limit is enforced. - * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the * TXQ queues for this phy. The smaller of this and the packet limit is * enforced. * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes @@ -5652,7 +5652,7 @@ enum nl80211_feature_flags { * enum nl80211_ext_feature_index - bit index of extended features. * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can - * can request to use RRM (see %NL80211_ATTR_USE_RRM) with + * request to use RRM (see %NL80211_ATTR_USE_RRM) with * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set * the ASSOC_REQ_USE_RRM flag in the association request even if * NL80211_FEATURE_QUIET is not advertized. @@ -6061,7 +6061,7 @@ enum nl80211_dfs_state { }; /** - * enum enum nl80211_protocol_features - nl80211 protocol features + * enum nl80211_protocol_features - nl80211 protocol features * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting * wiphy dumps (if requested by the application with the attribute * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the -- cgit v1.2.3 From 0f55c0c500f2bbfc5cc5590cdf6973b3f64dc195 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Jul 2020 09:43:22 -0700 Subject: net/wireless: wireless.h: drop duplicate word in comments Drop doubled word "threshold" in a comment. Signed-off-by: Randy Dunlap Cc: netdev@vger.kernel.org Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg Link: https://lore.kernel.org/r/20200715164325.9109-2-rdunlap@infradead.org Signed-off-by: Johannes Berg --- include/uapi/linux/wireless.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h index 24f3371ad826..08967b3f19c8 100644 --- a/include/uapi/linux/wireless.h +++ b/include/uapi/linux/wireless.h @@ -914,7 +914,7 @@ union iwreq_data { struct iw_param sens; /* signal level threshold */ struct iw_param bitrate; /* default bit rate */ struct iw_param txpower; /* default transmit power */ - struct iw_param rts; /* RTS threshold threshold */ + struct iw_param rts; /* RTS threshold */ struct iw_param frag; /* Fragmentation threshold */ __u32 mode; /* Operation mode */ struct iw_param retry; /* Retry limits & lifetime */ -- cgit v1.2.3 From 085a6c109b9dbcb6dfc0c7d1001f554a6d513342 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Jul 2020 09:43:23 -0700 Subject: net/wireless: cfg80211.h: drop duplicate words in comments Drop doubled word "by" in a comment. Change "operate in in" to "operate with in" as is used below. Signed-off-by: Randy Dunlap Cc: netdev@vger.kernel.org Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg Link: https://lore.kernel.org/r/20200715164325.9109-3-rdunlap@infradead.org Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ac6e58193426..5c7ea0b5dc50 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -439,7 +439,7 @@ struct ieee80211_sta_s1g_cap { * This structure describes a frequency band a wiphy * is able to operate in. * - * @channels: Array of channels the hardware can operate in + * @channels: Array of channels the hardware can operate with * in this band. * @band: the band this structure represents * @n_channels: Number of channels in @channels @@ -5527,7 +5527,7 @@ static inline int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, * * @skb: The input A-MSDU frame without any headers. * @list: The output list of 802.3 frames. It must be allocated and - * initialized by by the caller. + * initialized by the caller. * @addr: The device MAC address. * @iftype: The device interface type. * @extra_headroom: The hardware extra headroom for SKBs in the @list. -- cgit v1.2.3 From 66b239d28c7524324d2474b3faf206d00eadcd78 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Jul 2020 09:43:24 -0700 Subject: net/wireless: mac80211.h: drop duplicate words in comments Drop doubled words "are" and "by" in comments. Change doubled "to to" to "to the". Signed-off-by: Randy Dunlap Cc: netdev@vger.kernel.org Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg Link: https://lore.kernel.org/r/20200715164325.9109-4-rdunlap@infradead.org Signed-off-by: Johannes Berg --- include/net/mac80211.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 11d5610d2ad5..c0a597167f14 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2727,7 +2727,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * for devices that support offload of data packets (e.g. ARP responses). * * Mac80211 drivers should set the @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 flag - * when they are able to replace in-use PTK keys according to to following + * when they are able to replace in-use PTK keys according to the following * requirements: * 1) They do not hand over frames decrypted with the old key to mac80211 once the call to set_key() with command %DISABLE_KEY has been @@ -4709,7 +4709,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, * * Call this function for all transmitted data frames after their transmit * completion. This callback should only be called for data frames which - * are are using driver's (or hardware's) offload capability of encap/decap + * are using driver's (or hardware's) offload capability of encap/decap * 802.11 frames. * * This function may not be called in IRQ context. Calls to this function @@ -6344,7 +6344,7 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid); * * Note that this must be called in an rcu_read_lock() critical section, * which can only be released after the SKB was handled. Some pointers in - * skb->cb, e.g. the key pointer, are protected by by RCU and thus the + * skb->cb, e.g. the key pointer, are protected by RCU and thus the * critical section must persist not just for the duration of this call * but for the duration of the frame handling. * However, also note that while in the wake_tx_queue() method, -- cgit v1.2.3 From dec4ca931244632eeca46f406b2ce7f5a1fe723f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Jul 2020 09:43:25 -0700 Subject: net/wireless: regulatory.h: drop duplicate word in comment Drop doubled word "of" in a comment. Signed-off-by: Randy Dunlap Cc: netdev@vger.kernel.org Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg Link: https://lore.kernel.org/r/20200715164325.9109-5-rdunlap@infradead.org Signed-off-by: Johannes Berg --- include/net/regulatory.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/regulatory.h b/include/net/regulatory.h index 09a3099886e5..47f06f6f5a67 100644 --- a/include/net/regulatory.h +++ b/include/net/regulatory.h @@ -44,7 +44,7 @@ enum environment_cap { * and potentially inform users of which devices specifically * cased the conflicts. * @initiator: indicates who sent this request, could be any of - * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) + * those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested * regulatory domain. We have a few special codes: * 00 - World regulatory domain -- cgit v1.2.3 From 2f1805ea209a146669e0b660633ed22f49e1dd49 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 25 Jun 2020 14:15:24 +0300 Subject: cfg80211: allow the low level driver to flush the BSS table The low level driver adds its own opaque information in the BSS table in the cfg80211_bss structure. The low level driver may need to signal that this information is no longer relevant and needs to be recreated. Add an API to allow the low level driver to do that. iwlwifi needs this because it keeps there an information about the firmware's internal clock. This is kept in mac80211's struct ieee80211_bss::sync_device_ts. This information is populated while we scan, we add the internal firmware's clock to each beacon which allows us to program the firmware correctly after association so that it'll know when (in terms of its internal clock) the DTIM and TBTT will happen. When the firmware is reset this internal clock is reset as well and ieee80211_bss::sync_device_ts is no longer accurate. iwlwifi will call this new API any time the firmware is started. Signed-off-by: Emmanuel Grumbach Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5c7ea0b5dc50..fa4d5627397f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -7899,4 +7899,10 @@ void cfg80211_update_owe_info_event(struct net_device *netdev, struct cfg80211_update_owe_info *owe_info, gfp_t gfp); +/** + * cfg80211_bss_flush - resets all the scan entries + * @wiphy: the wiphy + */ +void cfg80211_bss_flush(struct wiphy *wiphy); + #endif /* __NET_CFG80211_H */ -- cgit v1.2.3 From e3718a611470d311a92c60d4eb535270b49a7108 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Wed, 17 Jun 2020 09:30:33 +0200 Subject: cfg80211/mac80211: add mesh_param "mesh_nolearn" to skip path discovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, before being able to forward a packet between two 802.11s nodes, both a PLINK handshake is performed upon receiving a beacon and then later a PREQ/PREP exchange for path discovery is performed on demand upon receiving a data frame to forward. When running a mesh protocol on top of an 802.11s interface, like batman-adv, we do not need the multi-hop mesh routing capabilities of 802.11s and usually set mesh_fwding=0. However, even with mesh_fwding=0 the PREQ/PREP path discovery is still performed on demand. Even though in this scenario the next hop PREQ/PREP will determine is always the direct 11s neighbor node. The new mesh_nolearn parameter allows to skip the PREQ/PREP exchange in this scenario, leading to a reduced delay, reduced packet buffering and simplifies HWMP in general. mesh_nolearn is still rather conservative in that if the packet destination is not a direct 11s neighbor, it will fall back to PREQ/PREP path discovery. For normal, multi-hop 802.11s mesh routing it is usually not advisable to enable mesh_nolearn as a transmission to a direct but distant neighbor might be worse than reaching that same node via a more robust / higher throughput etc. multi-hop path. Cc: Sven Eckelmann Cc: Simon Wunderlich Signed-off-by: Linus Lüssing Link: https://lore.kernel.org/r/20200617073034.26149-1-linus.luessing@c0d3.blue [fix nl80211 policy to range 0/1 only] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++++ include/uapi/linux/nl80211.h | 7 +++++++ 2 files changed, 13 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fa4d5627397f..78b220950942 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1870,6 +1870,11 @@ struct bss_parameters { * connected to a mesh gate in mesh formation info. If false, the * value in mesh formation is determined by the presence of root paths * in the mesh path table + * @dot11MeshNolearn: Try to avoid multi-hop path discovery (e.g. PREQ/PREP + * for HWMP) if the destination is a direct neighbor. Note that this might + * not be the optimal decision as a multi-hop route might be better. So + * if using this setting you will likely also want to disable + * dot11MeshForwarding and use another mesh routing protocol on top. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1901,6 +1906,7 @@ struct mesh_config { enum nl80211_mesh_power_mode power_mode; u16 dot11MeshAwakeWindowDuration; u32 plink_timeout; + bool dot11MeshNolearn; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f47a7a8d0216..a83d8faf88ac 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4236,6 +4236,12 @@ enum nl80211_mesh_power_mode { * field. If left unset then the mesh formation field will only * advertise such if there is an active root mesh path. * + * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g. + * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that + * this might not be the optimal decision as a multi-hop route might be + * better. So if using this setting you will likely also want to disable + * dot11MeshForwarding and use another mesh routing protocol on top. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -4269,6 +4275,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_AWAKE_WINDOW, NL80211_MESHCONF_PLINK_TIMEOUT, NL80211_MESHCONF_CONNECTED_TO_GATE, + NL80211_MESHCONF_NOLEARN, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit v1.2.3 From 184eebe664f0e11c485f6d309fe56297b3f75e9e Mon Sep 17 00:00:00 2001 From: Markus Theil Date: Thu, 11 Jun 2020 16:02:37 +0200 Subject: cfg80211/mac80211: add connected to auth server to meshconf Besides information about num of peerings and gate connectivity, the mesh formation byte also contains a flag for authentication server connectivity, that currently cannot be set in the mesh conf. This patch adds this capability, which is necessary to implement 802.1X authentication in mesh mode. Signed-off-by: Markus Theil Link: https://lore.kernel.org/r/20200611140238.427461-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 1 + include/uapi/linux/nl80211.h | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 78b220950942..8d5071f84ffe 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1895,6 +1895,7 @@ struct mesh_config { u16 dot11MeshHWMPnetDiameterTraversalTime; u8 dot11MeshHWMPRootMode; bool dot11MeshConnectedToMeshGate; + bool dot11MeshConnectedToAuthServer; u16 dot11MeshHWMPRannInterval; bool dot11MeshGateAnnouncementProtocol; bool dot11MeshForwarding; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index a83d8faf88ac..f1770e3756f4 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4242,6 +4242,10 @@ enum nl80211_mesh_power_mode { * better. So if using this setting you will likely also want to disable * dot11MeshForwarding and use another mesh routing protocol on top. * + * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA + * will advertise that it is connected to a authentication server + * in the mesh formation field. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -4276,6 +4280,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_PLINK_TIMEOUT, NL80211_MESHCONF_CONNECTED_TO_GATE, NL80211_MESHCONF_NOLEARN, + NL80211_MESHCONF_CONNECTED_TO_AS, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit v1.2.3 From 1303a51c24100b3b1915d6f9072fe5ae5bb4c5f6 Mon Sep 17 00:00:00 2001 From: Markus Theil Date: Thu, 11 Jun 2020 16:02:38 +0200 Subject: cfg80211/mac80211: add connected to auth server to station info This patch adds the necessary bits to later query the auth server flag for every peer from iw. Signed-off-by: Markus Theil Link: https://lore.kernel.org/r/20200611140238.427461-2-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 +++ include/uapi/linux/nl80211.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8d5071f84ffe..39fe21edd2c5 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1598,6 +1598,7 @@ struct cfg80211_tid_stats { * an FCS error. This counter should be incremented only when TA of the * received packet with an FCS error matches the peer MAC address. * @airtime_link_metric: mesh airtime link metric. + * @connected_to_as: true if mesh STA has a path to authentication server */ struct station_info { u64 filled; @@ -1655,6 +1656,8 @@ struct station_info { u32 fcs_err_count; u32 airtime_link_metric; + + u8 connected_to_as; }; #if IS_ENABLED(CONFIG_CFG80211) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f1770e3756f4..d6b6599a6001 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3370,6 +3370,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) * of STA's association + * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a + * authentication server (u8, 0 or 1) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3417,6 +3419,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_AIRTIME_WEIGHT, NL80211_STA_INFO_AIRTIME_LINK_METRIC, NL80211_STA_INFO_ASSOC_AT_BOOTTIME, + NL80211_STA_INFO_CONNECTED_TO_AS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, -- cgit v1.2.3 From 48a54f6bc456859dabbd1fbd805e233d260754cf Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 26 Jul 2020 15:09:46 +0200 Subject: net/fq_impl: use skb_get_hash instead of skb_get_hash_perturb This avoids unnecessarily regenerating the skb flow hash Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20200726130947.88145-1-nbd@nbd.name [small commit message fixup] Signed-off-by: Johannes Berg --- include/net/fq.h | 1 - include/net/fq_impl.h | 3 +-- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/fq.h b/include/net/fq.h index 2ad85e683041..e39f3f8d5f8a 100644 --- a/include/net/fq.h +++ b/include/net/fq.h @@ -69,7 +69,6 @@ struct fq { struct list_head backlogs; spinlock_t lock; u32 flows_cnt; - siphash_key_t perturbation; u32 limit; u32 memory_limit; u32 memory_usage; diff --git a/include/net/fq_impl.h b/include/net/fq_impl.h index 38a9a3d1222b..e73d74d2fabf 100644 --- a/include/net/fq_impl.h +++ b/include/net/fq_impl.h @@ -108,7 +108,7 @@ begin: static u32 fq_flow_idx(struct fq *fq, struct sk_buff *skb) { - u32 hash = skb_get_hash_perturb(skb, &fq->perturbation); + u32 hash = skb_get_hash(skb); return reciprocal_scale(hash, fq->flows_cnt); } @@ -308,7 +308,6 @@ static int fq_init(struct fq *fq, int flows_cnt) INIT_LIST_HEAD(&fq->backlogs); spin_lock_init(&fq->lock); fq->flows_cnt = max_t(u32, flows_cnt, 1); - get_random_bytes(&fq->perturbation, sizeof(fq->perturbation)); fq->quantum = 300; fq->limit = 8192; fq->memory_limit = 16 << 20; /* 16 MBytes */ -- cgit v1.2.3 From fd17dba1c860d39f655a3a08387c21e3ceca8c55 Mon Sep 17 00:00:00 2001 From: Veerendranath Jakkam Date: Mon, 20 Jul 2020 13:12:25 +0530 Subject: cfg80211: Add support to advertize OCV support Add a new feature flag that drivers can use to advertize support for Operating Channel Validation (OCV) when using driver's SME for RSNA handshakes. Signed-off-by: Veerendranath Jakkam Link: https://lore.kernel.org/r/20200720074225.8990-1-vjakkam@codeaurora.org Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d6b6599a6001..a3ae2b060a55 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5804,6 +5804,9 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver * can report tx status for control port over nl80211 tx operations. * + * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating + * Channel Validation (OCV) when using driver's SME for RSNA handshakes. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5859,6 +5862,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, + NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3 From e02281e7a5c524aaf6a52bb01afc4cc49addb908 Mon Sep 17 00:00:00 2001 From: Mathy Vanhoef Date: Thu, 23 Jul 2020 14:01:49 +0400 Subject: mac80211: add radiotap flag to prevent sequence number overwrite The radiotap specification contains a flag to indicate that the sequence number of an injected frame should not be overwritten. Parse this flag and define and set a corresponding Tx control flag. Signed-off-by: Mathy Vanhoef Link: https://lore.kernel.org/r/20200723100153.31631-2-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg --- include/net/ieee80211_radiotap.h | 1 + include/net/mac80211.h | 3 +++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h index 459d355f6506..19c00d100096 100644 --- a/include/net/ieee80211_radiotap.h +++ b/include/net/ieee80211_radiotap.h @@ -117,6 +117,7 @@ enum ieee80211_radiotap_tx_flags { IEEE80211_RADIOTAP_F_TX_CTS = 0x0002, IEEE80211_RADIOTAP_F_TX_RTS = 0x0004, IEEE80211_RADIOTAP_F_TX_NOACK = 0x0008, + IEEE80211_RADIOTAP_F_TX_NOSEQNO = 0x0010, }; /* for IEEE80211_RADIOTAP_MCS "have" flags */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c0a597167f14..21ce821a25e7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -825,6 +825,8 @@ enum mac80211_tx_info_flags { * @IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP: This frame skips mesh path lookup * @IEEE80211_TX_CTRL_HW_80211_ENCAP: This frame uses hardware encapsulation * (header conversion) + * @IEEE80211_TX_CTRL_NO_SEQNO: Do not overwrite the sequence number that + * has already been assigned to this frame. * * These flags are used in tx_info->control.flags. */ @@ -836,6 +838,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTRL_FAST_XMIT = BIT(4), IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP = BIT(5), IEEE80211_TX_CTRL_HW_80211_ENCAP = BIT(6), + IEEE80211_TX_CTRL_NO_SEQNO = BIT(7), }; /* -- cgit v1.2.3 From cb17ed29a7a5fea8c9bf70e8a05757d71650e025 Mon Sep 17 00:00:00 2001 From: Mathy Vanhoef Date: Thu, 23 Jul 2020 14:01:53 +0400 Subject: mac80211: parse radiotap header when selecting Tx queue Already parse the radiotap header in ieee80211_monitor_select_queue. In a subsequent commit this will allow us to add a radiotap flag that influences the queue on which injected packets will be sent. This also fixes the incomplete validation of the injected frame in ieee80211_monitor_select_queue: currently an out of bounds memory access may occur in in the called function ieee80211_select_queue_80211 if the 802.11 header is too small. Note that in ieee80211_monitor_start_xmit the radiotap header is parsed again, which is necessairy because ieee80211_monitor_select_queue is not always called beforehand. Signed-off-by: Mathy Vanhoef Link: https://lore.kernel.org/r/20200723100153.31631-6-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg --- include/net/mac80211.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 21ce821a25e7..6e26f0ba6fd0 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -6238,6 +6238,14 @@ bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct sk_buff *skb, int band, struct ieee80211_sta **sta); +/** + * Sanity-check and parse the radiotap header of injected frames + * @skb: packet injected by userspace + * @dev: the &struct device of this 802.11 device + */ +bool ieee80211_parse_tx_radiotap(struct sk_buff *skb, + struct net_device *dev); + /** * struct ieee80211_noa_data - holds temporary data for tracking P2P NoA state * -- cgit v1.2.3 From c5d1686b314ea44c5f210990dee05caf98cb068f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 26 Jul 2020 13:06:11 +0200 Subject: mac80211: add a function for running rx without passing skbs to the stack This can be used to run mac80211 rx processing on a batch of frames in NAPI poll before passing them to the network stack in a large batch. This can improve icache footprint, or it can be used to pass frames via netif_receive_skb_list. Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20200726110611.46886-1-nbd@nbd.name Signed-off-by: Johannes Berg --- include/net/mac80211.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 6e26f0ba6fd0..66e2bfd165e8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4360,6 +4360,31 @@ void ieee80211_free_hw(struct ieee80211_hw *hw); */ void ieee80211_restart_hw(struct ieee80211_hw *hw); +/** + * ieee80211_rx_list - receive frame and store processed skbs in a list + * + * Use this function to hand received frames to mac80211. The receive + * buffer in @skb must start with an IEEE 802.11 header. In case of a + * paged @skb is used, the driver is recommended to put the ieee80211 + * header of the frame on the linear part of the @skb to avoid memory + * allocation and/or memcpy by the stack. + * + * This function may not be called in IRQ context. Calls to this function + * for a single hardware must be synchronized against each other. Calls to + * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be + * mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). + * + * This function must be called with BHs disabled and RCU read lock + * + * @hw: the hardware this frame came in on + * @sta: the station the frame was received from, or %NULL + * @skb: the buffer to receive, owned by mac80211 after this call + * @list: the destination list + */ +void ieee80211_rx_list(struct ieee80211_hw *hw, struct ieee80211_sta *sta, + struct sk_buff *skb, struct list_head *list); + /** * ieee80211_rx_napi - receive frame from NAPI context * -- cgit v1.2.3 From 75e6b594bbaeeb3f8287a2e6eb8811384b8c7195 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 30 Jul 2020 13:00:52 +0200 Subject: cfg80211: invert HE BSS color 'disabled' to 'enabled' This is in fact 'disabled' in the spec, but there it's in a place where that actually makes sense. In our internal data structures, it doesn't really make sense, and in fact the previous commit just fixed a bug in that area. Make this safer by inverting the polarity from 'disabled' to 'enabled'. Link: https://lore.kernel.org/r/20200730130051.5d8399545bd9.Ie62fdcd1a6cd9c969315bc124084a494ca6c8df3@changeid Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 39fe21edd2c5..d9e6b9fbd95b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -267,12 +267,12 @@ struct ieee80211_he_obss_pd { * struct cfg80211_he_bss_color - AP settings for BSS coloring * * @color: the current color. - * @disabled: is the feature disabled. + * @enabled: HE BSS color is used * @partial: define the AID equation. */ struct cfg80211_he_bss_color { u8 color; - bool disabled; + bool enabled; bool partial; }; -- cgit v1.2.3 From f96622749a67d40ad5efe8a58d5fc95313097aa0 Mon Sep 17 00:00:00 2001 From: Chung-Hsien Hsu Date: Tue, 23 Jun 2020 08:49:35 -0500 Subject: nl80211: support 4-way handshake offloading for WPA/WPA2-PSK in AP mode Let drivers advertise support for AP-mode WPA/WPA2-PSK 4-way handshake offloading with a new NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag. Extend use of NL80211_ATTR_PMK attribute indicating it might be passed as part of NL80211_CMD_START_AP command, and contain the PSK (which is the PMK, hence the name). The driver is assumed to handle the 4-way handshake by itself in this case, instead of relying on userspace. Signed-off-by: Chung-Hsien Hsu Signed-off-by: Chi-Hsien Lin Link: https://lore.kernel.org/r/20200623134938.39997-2-chi-hsien.lin@cypress.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index a3ae2b060a55..631f3a997b3c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -183,18 +183,27 @@ * * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers * can indicate they support offloading EAPOL handshakes for WPA/WPA2 - * preshared key authentication. In %NL80211_CMD_CONNECT the preshared - * key should be specified using %NL80211_ATTR_PMK. Drivers supporting - * this offload may reject the %NL80211_CMD_CONNECT when no preshared - * key material is provided, for example when that driver does not - * support setting the temporal keys through %CMD_NEW_KEY. + * preshared key authentication in station mode. In %NL80211_CMD_CONNECT + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_CONNECT when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. * * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be * set by drivers indicating offload support of the PTK/GTK EAPOL - * handshakes during 802.1X authentication. In order to use the offload - * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS - * attribute flag. Drivers supporting this offload may reject the - * %NL80211_CMD_CONNECT when the attribute flag is not present. + * handshakes during 802.1X authentication in station mode. In order to + * use the offload the %NL80211_CMD_CONNECT should have + * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this + * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is + * not present. + * + * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers + * can indicate they support offloading EAPOL handshakes for WPA/WPA2 + * preshared key authentication in AP mode. In %NL80211_CMD_START_AP + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_START_AP when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. * * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK * using %NL80211_CMD_SET_PMK. For offloaded FT support also @@ -2362,10 +2371,11 @@ enum nl80211_commands { * * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. - * For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way - * handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is - * used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute - * specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well. + * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide + * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X + * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT + * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME + * is included as well. * * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to * indicate that it supports multiple active scheduled scan requests. @@ -5807,6 +5817,10 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating * Channel Validation (OCV) when using driver's SME for RSNA handshakes. * + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way + * handshake with PSK in AP mode (PSK is passed as part of the start AP + * command). + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5863,6 +5877,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3