From b7ffbd7ef6751f6cde73082346e365738daf00d2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 4 Jun 2014 17:31:56 +0200 Subject: cfg80211: make ethtool the driver's responsibility Currently, cfg80211 tries to implement ethtool, but that doesn't really scale well, with all the different operations. Make the lower-level driver responsible for it, which currently only has an effect on mac80211. It will similarly not scale well at that level though, since mac80211 also has many drivers. To cleanly implement this in mac80211, introduce a new file and move some code to appropriate places. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 29 ++++------------------------- 1 file changed, 4 insertions(+), 25 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e46c437944f7..29cb4b2bee5a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2266,10 +2266,6 @@ struct cfg80211_qos_map { * * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). * - * @set_ringparam: Set tx and rx ring sizes. - * - * @get_ringparam: Get tx and rx ring current and maximum sizes. - * * @tdls_mgmt: Transmit a TDLS management frame. * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). * @@ -2278,16 +2274,6 @@ struct cfg80211_qos_map { * * @set_noack_map: Set the NoAck Map for the TIDs. * - * @get_et_sset_count: Ethtool API to get string-set count. - * See @ethtool_ops.get_sset_count - * - * @get_et_stats: Ethtool API to get a set of u64 stats. - * See @ethtool_ops.get_ethtool_stats - * - * @get_et_strings: Ethtool API to get a set of strings to describe stats - * and perhaps other supported types of ethtool data-sets. - * See @ethtool_ops.get_strings - * * @get_channel: Get the current operating channel for the virtual interface. * For monitor interfaces, it should return %NULL unless there's a single * current monitoring channel. @@ -2503,10 +2489,6 @@ struct cfg80211_ops { int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); - int (*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx); - void (*get_ringparam)(struct wiphy *wiphy, - u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); - int (*sched_scan_start)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_sched_scan_request *request); @@ -2529,13 +2511,6 @@ struct cfg80211_ops { struct net_device *dev, u16 noack_map); - int (*get_et_sset_count)(struct wiphy *wiphy, - struct net_device *dev, int sset); - void (*get_et_stats)(struct wiphy *wiphy, struct net_device *dev, - struct ethtool_stats *stats, u64 *data); - void (*get_et_strings)(struct wiphy *wiphy, struct net_device *dev, - u32 sset, u8 *data); - int (*get_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_chan_def *chandef); @@ -4843,6 +4818,10 @@ void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev, */ void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy); + +/* ethtool helper */ +void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ -- cgit v1.2.3 From 31fa97c5defca3895dc6c823096d7ba59df76125 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 11 Jun 2014 17:18:21 +0300 Subject: cfg80211: pass TDLS initiator in tdls_mgmt operations The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 +- include/uapi/linux/nl80211.h | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 29cb4b2bee5a..b9eeae3990cf 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2500,7 +2500,7 @@ struct cfg80211_ops { int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u8 action_code, u8 dialog_token, u16 status_code, u32 peer_capability, - const u8 *buf, size_t len); + bool initiator, const u8 *buf, size_t len); int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, enum nl80211_tdls_operation oper); diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index be9519b52bb1..f1db15b9c041 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1591,6 +1591,9 @@ enum nl80211_commands { * creation then the new interface will be owned by the netlink socket * that created it and will be destroyed when the socket is closed * + * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is + * the TDLS link initiator. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1931,6 +1934,8 @@ enum nl80211_attrs { NL80211_ATTR_CSA_C_OFFSETS_TX, NL80211_ATTR_MAX_CSA_COUNTERS, + NL80211_ATTR_TDLS_INITIATOR, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From c887f0d3a03283cb6fe2c32aae62229bebd3fa32 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 11 Jun 2014 17:18:25 +0300 Subject: mac80211: add API to request TDLS operation from userspace Write a mac80211 to the cfg80211 API for requesting a userspace TDLS operation. Define TDLS specific reason codes that can be used here. Signed-off-by: Arik Nemtsov Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 3 +++ include/net/mac80211.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 6bff13f74050..75d17e15da33 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1621,6 +1621,9 @@ enum ieee80211_reasoncode { WLAN_REASON_INVALID_RSN_IE_CAP = 22, WLAN_REASON_IEEE8021X_FAILED = 23, WLAN_REASON_CIPHER_SUITE_REJECTED = 24, + /* TDLS (802.11z) */ + WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE = 25, + WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED = 26, /* 802.11e */ WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 421b6ecb4b2c..8d876dc8b299 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4815,4 +4815,17 @@ int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr, */ void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf); +/** + * ieee80211_tdls_oper - request userspace to perform a TDLS operation + * @vif: virtual interface + * @peer: the peer's destination address + * @oper: the requested TDLS operation + * @reason_code: reason code for the operation, valid for TDLS teardown + * @gfp: allocation flags + * + * See cfg80211_tdls_oper_request(). + */ +void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer, + enum nl80211_tdls_operation oper, + u16 reason_code, gfp_t gfp); #endif /* MAC80211_H */ -- cgit v1.2.3 From ee10f2c779b28c1d6e87ac3e1bbb1aa8b62fa891 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 11 Jun 2014 17:18:27 +0300 Subject: mac80211: protect TDLS discovery session After sending a TDLS discovery-request, we expect a reply to arrive on the AP's channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS setup-response is a direct packet not buffered by the AP. Add a new mac80211 driver callback to allow discovery session protection. Signed-off-by: Arik Nemtsov Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- include/net/mac80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8d876dc8b299..18c2bdbaf988 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2764,6 +2764,15 @@ enum ieee80211_roc_type { * mac80211 will transmit the frame right away. * The callback is optional and can (should!) sleep. * + * @mgd_protect_tdls_discover: Protect a TDLS discovery session. After sending + * a TDLS discovery-request, we expect a reply to arrive on the AP's + * channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS + * setup-response is a direct packet not buffered by the AP. + * mac80211 will call this function just before the transmission of a TDLS + * discovery-request. The recommended period of protection is at least + * 2 * (DTIM period). + * The callback is optional and can sleep. + * * @add_chanctx: Notifies device driver about new channel context creation. * @remove_chanctx: Notifies device driver about channel context destruction. * @change_chanctx: Notifies device driver about channel context changes that @@ -2981,6 +2990,9 @@ struct ieee80211_ops { void (*mgd_prepare_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*mgd_protect_tdls_discover)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + int (*add_chanctx)(struct ieee80211_hw *hw, struct ieee80211_chanctx_conf *ctx); void (*remove_chanctx)(struct ieee80211_hw *hw, -- cgit v1.2.3 From c56ef6725068c0ce499e517409c0da226ef51b08 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Wed, 5 Feb 2014 15:21:13 +0200 Subject: mac80211: support more than one band in scan request Some drivers (such as iwlmvm) can handle multiple bands in a single HW scan request. Add a HW flag to indicate that the driver support this. To hold the required data, create a separate structure for HW scan request that holds cfg scan request and data about different parts of the scan IEs. As this changes the mac80211 API, update all drivers using it to use the correct new function type/argument. Signed-off-by: David Spinadel Signed-off-by: Johannes Berg --- include/net/mac80211.h | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 18c2bdbaf988..9536ee3e22a9 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -768,6 +768,26 @@ struct ieee80211_sched_scan_ies { size_t len[IEEE80211_NUM_BANDS]; }; +/** + * struct ieee80211_scan_ies - descriptors for different blocks of IEs + * + * This structure is used to point to different blocks of IEs in HW scan. + * These blocks contain the IEs passed by userspace and the ones generated + * by mac80211. + * + * @ies: pointers to band specific IEs. + * @len: lengths of band_specific IEs. + * @common_ies: IEs for all bands (especially vendor specific ones) + * @common_ie_len: length of the common_ies + */ +struct ieee80211_scan_ies { + const u8 *ies[IEEE80211_NUM_BANDS]; + size_t len[IEEE80211_NUM_BANDS]; + const u8 *common_ies; + size_t common_ie_len; +}; + + static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) { return (struct ieee80211_tx_info *)skb->cb; @@ -1606,6 +1626,9 @@ struct ieee80211_tx_control { * on single-channel hardware. It can also be used as an * optimization in certain channel switch cases with * multi-channel. + * + * @IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands + * in one command, mac80211 doesn't have to run separate scans per band. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1638,6 +1661,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27, IEEE80211_HW_CHANCTX_STA_CSA = 1<<28, IEEE80211_HW_CHANGE_RUNNING_CHANCTX = 1<<29, + IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS = 1<<30, }; /** @@ -1763,6 +1787,19 @@ struct ieee80211_hw { const struct ieee80211_cipher_scheme *cipher_schemes; }; +/** + * struct ieee80211_scan_request - hw scan request + * + * @ies: pointers different parts of IEs (in req.ie) + * @req: cfg80211 request. + */ +struct ieee80211_scan_request { + struct ieee80211_scan_ies ies; + + /* Keep last */ + struct cfg80211_scan_request req; +}; + /** * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy * @@ -2874,7 +2911,7 @@ struct ieee80211_ops { void (*set_default_unicast_key)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int idx); int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct cfg80211_scan_request *req); + struct ieee80211_scan_request *req); void (*cancel_hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int (*sched_scan_start)(struct ieee80211_hw *hw, -- cgit v1.2.3 From 633e27132625a0692440c4db58b901fb3cb67c55 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Thu, 6 Feb 2014 16:15:23 +0200 Subject: mac80211: split sched scan IEs Split sched scan IEs to band specific and not band specific blocks. Common IEs blocks may be sent to the FW once per command, instead of per band. This allows optimization of size of the command, which may be required by some drivers (eg. iwlmvm with newer firmware version). As this changes the mac80211 API, update all drivers to use the new version correctly, even if they don't (yet) make use of the split data. Signed-off-by: David Spinadel Reviewed-by: Alexander Bondar Signed-off-by: Johannes Berg --- include/net/mac80211.h | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9536ee3e22a9..545d2fa179c4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -753,27 +753,12 @@ struct ieee80211_tx_info { }; }; -/** - * struct ieee80211_sched_scan_ies - scheduled scan IEs - * - * This structure is used to pass the appropriate IEs to be used in scheduled - * scans for all bands. It contains both the IEs passed from the userspace - * and the ones generated by mac80211. - * - * @ie: array with the IEs for each supported band - * @len: array with the total length of the IEs for each band - */ -struct ieee80211_sched_scan_ies { - u8 *ie[IEEE80211_NUM_BANDS]; - size_t len[IEEE80211_NUM_BANDS]; -}; - /** * struct ieee80211_scan_ies - descriptors for different blocks of IEs * - * This structure is used to point to different blocks of IEs in HW scan. - * These blocks contain the IEs passed by userspace and the ones generated - * by mac80211. + * This structure is used to point to different blocks of IEs in HW scan + * and scheduled scan. These blocks contain the IEs passed by userspace + * and the ones generated by mac80211. * * @ies: pointers to band specific IEs. * @len: lengths of band_specific IEs. @@ -2917,7 +2902,7 @@ struct ieee80211_ops { int (*sched_scan_start)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_sched_scan_request *req, - struct ieee80211_sched_scan_ies *ies); + struct ieee80211_scan_ies *ies); int (*sched_scan_stop)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*sw_scan_start)(struct ieee80211_hw *hw); -- cgit v1.2.3 From 5bcae31d9cb1ebfad3ad5a3eea04c8cdc329a04f Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 25 Jun 2014 12:35:06 +0200 Subject: mac80211: implement multi-vif in-place reservations Multi-vif in-place reservations happen when it is impossible to allocate more channel contexts as indicated by interface combinations. Such reservations are not finalized until all assigned interfaces are ready. This still doesn't handle all possible cases (i.e. degradation of number of channels) properly. Signed-off-by: Michal Kazior Signed-off-by: Johannes Berg --- include/net/mac80211.h | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 545d2fa179c4..9ce5cb17ed82 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1606,12 +1606,6 @@ struct ieee80211_tx_control { * is not enabled the default action is to disconnect when getting the * CSA frame. * - * @IEEE80211_HW_CHANGE_RUNNING_CHANCTX: The hardware can change a - * channel context on-the-fly. This is needed for channel switch - * on single-channel hardware. It can also be used as an - * optimization in certain channel switch cases with - * multi-channel. - * * @IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands * in one command, mac80211 doesn't have to run separate scans per band. */ @@ -1645,7 +1639,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27, IEEE80211_HW_CHANCTX_STA_CSA = 1<<28, - IEEE80211_HW_CHANGE_RUNNING_CHANCTX = 1<<29, + /* bit 29 unused */ IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS = 1<<30, }; -- cgit v1.2.3 From 97dc94f1d933c9df2c0b327066ea130c0e92083f Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 25 Jun 2014 12:35:10 +0200 Subject: cfg80211: remove channel_switch combination check Driver is now responsible for veryfing if the switch is possible. Since this is inherently tricky driver may decide to disconnect an interface later with cfg80211_stop_iface(). This doesn't mean driver can accept everything. It should do it's best to verify requests and reject them as soon as possible. Signed-off-by: Michal Kazior Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index b9eeae3990cf..0a080c4de275 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2301,7 +2301,12 @@ struct cfg80211_qos_map { * reliability. This operation can not fail. * @set_coalesce: Set coalesce parameters. * - * @channel_switch: initiate channel-switch procedure (with CSA) + * @channel_switch: initiate channel-switch procedure (with CSA). Driver is + * responsible for veryfing if the switch is possible. Since this is + * inherently tricky driver may decide to disconnect an interface later + * with cfg80211_stop_iface(). This doesn't mean driver can accept + * everything. It should do it's best to verify requests and reject them + * as soon as possible. * * @set_qos_map: Set QoS mapping information to the driver * -- cgit v1.2.3 From f473832fece16611520bf54ad52b16c3f6db0a94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sat, 5 Jul 2014 01:10:41 +0200 Subject: bcma: add driver for PCIe Gen 2 core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit New Broadcom PCIe devices (802.11ac ones?) use Gen2 and have to be initialized differently. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 2 + include/linux/bcma/bcma_driver_pcie2.h | 158 +++++++++++++++++++++++++++++++++ 2 files changed, 160 insertions(+) create mode 100644 include/linux/bcma/bcma_driver_pcie2.h (limited to 'include') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 0b3bb16c705a..452286a38b2b 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include #include +#include #include #include #include /* SPROM sharing */ @@ -333,6 +334,7 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci[2]; + struct bcma_drv_pcie2 drv_pcie2; struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; diff --git a/include/linux/bcma/bcma_driver_pcie2.h b/include/linux/bcma/bcma_driver_pcie2.h new file mode 100644 index 000000000000..5988b05781c3 --- /dev/null +++ b/include/linux/bcma/bcma_driver_pcie2.h @@ -0,0 +1,158 @@ +#ifndef LINUX_BCMA_DRIVER_PCIE2_H_ +#define LINUX_BCMA_DRIVER_PCIE2_H_ + +#define BCMA_CORE_PCIE2_CLK_CONTROL 0x0000 +#define PCIE2_CLKC_RST_OE 0x0001 /* When set, drives PCI_RESET out to pin */ +#define PCIE2_CLKC_RST 0x0002 /* Value driven out to pin */ +#define PCIE2_CLKC_SPERST 0x0004 /* SurvivePeRst */ +#define PCIE2_CLKC_DISABLE_L1CLK_GATING 0x0010 +#define PCIE2_CLKC_DLYPERST 0x0100 /* Delay PeRst to CoE Core */ +#define PCIE2_CLKC_DISSPROMLD 0x0200 /* DisableSpromLoadOnPerst */ +#define PCIE2_CLKC_WAKE_MODE_L2 0x1000 /* Wake on L2 */ +#define BCMA_CORE_PCIE2_RC_PM_CONTROL 0x0004 +#define BCMA_CORE_PCIE2_RC_PM_STATUS 0x0008 +#define BCMA_CORE_PCIE2_EP_PM_CONTROL 0x000C +#define BCMA_CORE_PCIE2_EP_PM_STATUS 0x0010 +#define BCMA_CORE_PCIE2_EP_LTR_CONTROL 0x0014 +#define BCMA_CORE_PCIE2_EP_LTR_STATUS 0x0018 +#define BCMA_CORE_PCIE2_EP_OBFF_STATUS 0x001C +#define BCMA_CORE_PCIE2_PCIE_ERR_STATUS 0x0020 +#define BCMA_CORE_PCIE2_RC_AXI_CONFIG 0x0100 +#define BCMA_CORE_PCIE2_EP_AXI_CONFIG 0x0104 +#define BCMA_CORE_PCIE2_RXDEBUG_STATUS0 0x0108 +#define BCMA_CORE_PCIE2_RXDEBUG_CONTROL0 0x010C +#define BCMA_CORE_PCIE2_CONFIGINDADDR 0x0120 +#define BCMA_CORE_PCIE2_CONFIGINDDATA 0x0124 +#define BCMA_CORE_PCIE2_MDIOCONTROL 0x0128 +#define BCMA_CORE_PCIE2_MDIOWRDATA 0x012C +#define BCMA_CORE_PCIE2_MDIORDDATA 0x0130 +#define BCMA_CORE_PCIE2_DATAINTF 0x0180 +#define BCMA_CORE_PCIE2_D2H_INTRLAZY_0 0x0188 +#define BCMA_CORE_PCIE2_H2D_INTRLAZY_0 0x018c +#define BCMA_CORE_PCIE2_H2D_INTSTAT_0 0x0190 +#define BCMA_CORE_PCIE2_H2D_INTMASK_0 0x0194 +#define BCMA_CORE_PCIE2_D2H_INTSTAT_0 0x0198 +#define BCMA_CORE_PCIE2_D2H_INTMASK_0 0x019c +#define BCMA_CORE_PCIE2_LTR_STATE 0x01A0 /* Latency Tolerance Reporting */ +#define PCIE2_LTR_ACTIVE 2 +#define PCIE2_LTR_ACTIVE_IDLE 1 +#define PCIE2_LTR_SLEEP 0 +#define PCIE2_LTR_FINAL_MASK 0x300 +#define PCIE2_LTR_FINAL_SHIFT 8 +#define BCMA_CORE_PCIE2_PWR_INT_STATUS 0x01A4 +#define BCMA_CORE_PCIE2_PWR_INT_MASK 0x01A8 +#define BCMA_CORE_PCIE2_CFG_ADDR 0x01F8 +#define BCMA_CORE_PCIE2_CFG_DATA 0x01FC +#define BCMA_CORE_PCIE2_SYS_EQ_PAGE 0x0200 +#define BCMA_CORE_PCIE2_SYS_MSI_PAGE 0x0204 +#define BCMA_CORE_PCIE2_SYS_MSI_INTREN 0x0208 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL0 0x0210 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL1 0x0214 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL2 0x0218 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL3 0x021C +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL4 0x0220 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL5 0x0224 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD0 0x0250 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL0 0x0254 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD1 0x0258 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL1 0x025C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD2 0x0260 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL2 0x0264 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD3 0x0268 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL3 0x026C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD4 0x0270 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL4 0x0274 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD5 0x0278 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL5 0x027C +#define BCMA_CORE_PCIE2_SYS_RC_INTX_EN 0x0330 +#define BCMA_CORE_PCIE2_SYS_RC_INTX_CSR 0x0334 +#define BCMA_CORE_PCIE2_SYS_MSI_REQ 0x0340 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_EN 0x0344 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_CSR 0x0348 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR0 0x0350 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR1 0x0354 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR2 0x0358 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR3 0x035C +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN0 0x0360 +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN1 0x0364 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR0 0x0370 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR1 0x0374 +#define BCMA_CORE_PCIE2_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_0 0x0C00 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_1 0x0C04 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_2 0x0C08 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_3 0x0C0C +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_4 0x0C10 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_5 0x0C14 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_6 0x0C18 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_7 0x0C1C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_0 0x0C20 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_1 0x0C24 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_2 0x0C28 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_3 0x0C2C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_4 0x0C30 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_5 0x0C34 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_6 0x0C38 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_7 0x0C3C +#define BCMA_CORE_PCIE2_FUNC0_IMAP1 0x0C80 +#define BCMA_CORE_PCIE2_FUNC1_IMAP1 0x0C88 +#define BCMA_CORE_PCIE2_FUNC0_IMAP2 0x0CC0 +#define BCMA_CORE_PCIE2_FUNC1_IMAP2 0x0CC8 +#define BCMA_CORE_PCIE2_IARR0_LOWER 0x0D00 +#define BCMA_CORE_PCIE2_IARR0_UPPER 0x0D04 +#define BCMA_CORE_PCIE2_IARR1_LOWER 0x0D08 +#define BCMA_CORE_PCIE2_IARR1_UPPER 0x0D0C +#define BCMA_CORE_PCIE2_IARR2_LOWER 0x0D10 +#define BCMA_CORE_PCIE2_IARR2_UPPER 0x0D14 +#define BCMA_CORE_PCIE2_OARR0 0x0D20 +#define BCMA_CORE_PCIE2_OARR1 0x0D28 +#define BCMA_CORE_PCIE2_OARR2 0x0D30 +#define BCMA_CORE_PCIE2_OMAP0_LOWER 0x0D40 +#define BCMA_CORE_PCIE2_OMAP0_UPPER 0x0D44 +#define BCMA_CORE_PCIE2_OMAP1_LOWER 0x0D48 +#define BCMA_CORE_PCIE2_OMAP1_UPPER 0x0D4C +#define BCMA_CORE_PCIE2_OMAP2_LOWER 0x0D50 +#define BCMA_CORE_PCIE2_OMAP2_UPPER 0x0D54 +#define BCMA_CORE_PCIE2_FUNC1_IARR1_SIZE 0x0D58 +#define BCMA_CORE_PCIE2_FUNC1_IARR2_SIZE 0x0D5C +#define BCMA_CORE_PCIE2_MEM_CONTROL 0x0F00 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG0 0x0F04 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG1 0x0F08 +#define BCMA_CORE_PCIE2_LINK_STATUS 0x0F0C +#define BCMA_CORE_PCIE2_STRAP_STATUS 0x0F10 +#define BCMA_CORE_PCIE2_RESET_STATUS 0x0F14 +#define BCMA_CORE_PCIE2_RESETEN_IN_LINKDOWN 0x0F18 +#define BCMA_CORE_PCIE2_MISC_INTR_EN 0x0F1C +#define BCMA_CORE_PCIE2_TX_DEBUG_CFG 0x0F20 +#define BCMA_CORE_PCIE2_MISC_CONFIG 0x0F24 +#define BCMA_CORE_PCIE2_MISC_STATUS 0x0F28 +#define BCMA_CORE_PCIE2_INTR_EN 0x0F30 +#define BCMA_CORE_PCIE2_INTR_CLEAR 0x0F34 +#define BCMA_CORE_PCIE2_INTR_STATUS 0x0F38 + +/* PCIE gen2 config regs */ +#define PCIE2_INTSTATUS 0x090 +#define PCIE2_INTMASK 0x094 +#define PCIE2_SBMBX 0x098 + +#define PCIE2_PMCR_REFUP 0x1814 /* Trefup time */ + +#define PCIE2_CAP_DEVSTSCTRL2_OFFSET 0xD4 +#define PCIE2_CAP_DEVSTSCTRL2_LTRENAB 0x400 +#define PCIE2_PVT_REG_PM_CLK_PERIOD 0x184c + +struct bcma_drv_pcie2 { + struct bcma_device *core; +}; + +#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset) +#define pcie2_read32(pcie2, offset) bcma_read32((pcie2)->core, offset) +#define pcie2_write16(pcie2, offset, val) bcma_write16((pcie2)->core, offset, val) +#define pcie2_write32(pcie2, offset, val) bcma_write32((pcie2)->core, offset, val) + +#define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set) +#define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask) + +void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2); + +#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */ -- cgit v1.2.3