From 4b6ba8aacbb3185703b797286547d0f8f3859b02 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 26 Oct 2010 15:07:13 -0700 Subject: of/net: Move of_get_mac_address() to a common source file. There are two identical implementations of of_get_mac_address(), one each in arch/powerpc/kernel/prom_parse.c and arch/microblaze/kernel/prom_parse.c. Move this function to a new common file of_net.{c,h} and adjust all the callers to include the new header. Signed-off-by: David Daney [grant.likely@secretlab.ca: protect header with #ifdef] Signed-off-by: Grant Likely --- include/linux/of_net.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 include/linux/of_net.h (limited to 'include') diff --git a/include/linux/of_net.h b/include/linux/of_net.h new file mode 100644 index 000000000000..e913081fb52a --- /dev/null +++ b/include/linux/of_net.h @@ -0,0 +1,15 @@ +/* + * OF helpers for network devices. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_NET_H +#define __LINUX_OF_NET_H + +#ifdef CONFIG_OF_NET +#include +extern const void *of_get_mac_address(struct device_node *np); +#endif + +#endif /* __LINUX_OF_NET_H */ -- cgit v1.2.3 From 4a92379bdfb48680a5e6775dd53a586df7b6b0b1 Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Thu, 21 Oct 2010 10:29:19 +0100 Subject: slub tracing: move trace calls out of always inlined functions to reduce kernel code size Having the trace calls defined in the always inlined kmalloc functions in include/linux/slub_def.h causes a lot of code duplication as the trace functions get instantiated for each kamalloc call site. This can simply be removed by pushing the trace calls down into the functions in slub.c. On my x86_64 built this patch shrinks the code size of the kernel by approx 36K and also shrinks the code size of many modules -- too many to list here ;) size vmlinux (2.6.36) reports text data bss dec hex filename 5410611 743172 828928 6982711 6a8c37 vmlinux 5373738 744244 828928 6946910 6a005e vmlinux + patch The resulting kernel has had some testing & kmalloc trace still seems to work. This patch - moves trace_kmalloc out of the inlined kmalloc() and pushes it down into kmem_cache_alloc_trace() so this it only get instantiated once. - rename kmem_cache_alloc_notrace() to kmem_cache_alloc_trace() to indicate that now is does have tracing. (maybe this would better being called something like kmalloc_kmem_cache ?) - adds a new function kmalloc_order() to handle allocation and tracing of large allocations of page order. - removes tracing from the inlined kmalloc_large() replacing them with a call to kmalloc_order(); - move tracing out of inlined kmalloc_node() and pushing it down into kmem_cache_alloc_node_trace - rename kmem_cache_alloc_node_notrace() to kmem_cache_alloc_node_trace() - removes the include of trace/events/kmem.h from slub_def.h. v2 - keep kmalloc_order_trace inline when !CONFIG_TRACE Signed-off-by: Richard Kennedy Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 55 +++++++++++++++++++++++------------------------- 1 file changed, 26 insertions(+), 29 deletions(-) (limited to 'include') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index e4f5ed180b9b..8b6e8ae5d5ca 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -10,9 +10,8 @@ #include #include #include -#include -#include +#include enum stat_item { ALLOC_FASTPATH, /* Allocation from cpu slab */ @@ -216,31 +215,40 @@ static __always_inline struct kmem_cache *kmalloc_slab(size_t size) void *kmem_cache_alloc(struct kmem_cache *, gfp_t); void *__kmalloc(size_t size, gfp_t flags); +static __always_inline void * +kmalloc_order(size_t size, gfp_t flags, unsigned int order) +{ + void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order); + kmemleak_alloc(ret, size, 1, flags); + return ret; +} + #ifdef CONFIG_TRACING -extern void *kmem_cache_alloc_notrace(struct kmem_cache *s, gfp_t gfpflags); +extern void * +kmem_cache_alloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size); +extern void *kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order); #else static __always_inline void * -kmem_cache_alloc_notrace(struct kmem_cache *s, gfp_t gfpflags) +kmem_cache_alloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size) { return kmem_cache_alloc(s, gfpflags); } + +static __always_inline void * +kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order) +{ + return kmalloc_order(size, flags, order); +} #endif static __always_inline void *kmalloc_large(size_t size, gfp_t flags) { unsigned int order = get_order(size); - void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order); - - kmemleak_alloc(ret, size, 1, flags); - trace_kmalloc(_THIS_IP_, ret, size, PAGE_SIZE << order, flags); - - return ret; + return kmalloc_order_trace(size, flags, order); } static __always_inline void *kmalloc(size_t size, gfp_t flags) { - void *ret; - if (__builtin_constant_p(size)) { if (size > SLUB_MAX_SIZE) return kmalloc_large(size, flags); @@ -251,11 +259,7 @@ static __always_inline void *kmalloc(size_t size, gfp_t flags) if (!s) return ZERO_SIZE_PTR; - ret = kmem_cache_alloc_notrace(s, flags); - - trace_kmalloc(_THIS_IP_, ret, size, s->size, flags); - - return ret; + return kmem_cache_alloc_trace(s, flags, size); } } return __kmalloc(size, flags); @@ -266,14 +270,14 @@ void *__kmalloc_node(size_t size, gfp_t flags, int node); void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); #ifdef CONFIG_TRACING -extern void *kmem_cache_alloc_node_notrace(struct kmem_cache *s, +extern void *kmem_cache_alloc_node_trace(struct kmem_cache *s, gfp_t gfpflags, - int node); + int node, size_t size); #else static __always_inline void * -kmem_cache_alloc_node_notrace(struct kmem_cache *s, +kmem_cache_alloc_node_trace(struct kmem_cache *s, gfp_t gfpflags, - int node) + int node, size_t size) { return kmem_cache_alloc_node(s, gfpflags, node); } @@ -281,8 +285,6 @@ kmem_cache_alloc_node_notrace(struct kmem_cache *s, static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) { - void *ret; - if (__builtin_constant_p(size) && size <= SLUB_MAX_SIZE && !(flags & SLUB_DMA)) { struct kmem_cache *s = kmalloc_slab(size); @@ -290,12 +292,7 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) if (!s) return ZERO_SIZE_PTR; - ret = kmem_cache_alloc_node_notrace(s, flags, node); - - trace_kmalloc_node(_THIS_IP_, ret, - size, s->size, flags, node); - - return ret; + return kmem_cache_alloc_node_trace(s, flags, node, size); } return __kmalloc_node(size, flags, node); } -- cgit v1.2.3 From 4d17aeb1c5b2375769446d13012a98e6d265ec13 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 21 Sep 2010 19:37:15 +0530 Subject: OMAP: I2C: split device registration and convert OMAP2+ to omap_device Split the OMAP1 and OMAP2+ platform_device build and register code. Convert the OMAP2+ variant to use omap_device. This patch was developed in collaboration with Rajendra Nayak . Signed-off-by: Paul Walmsley Signed-off-by: Rajendra Nayak Cc: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/i2c-omap.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h index 78ebf507ce56..7472449cbb74 100644 --- a/include/linux/i2c-omap.h +++ b/include/linux/i2c-omap.h @@ -1,9 +1,14 @@ #ifndef __I2C_OMAP_H__ #define __I2C_OMAP_H__ +#include + struct omap_i2c_bus_platform_data { u32 clkrate; void (*set_mpu_wkup_lat)(struct device *dev, long set); + int (*device_enable) (struct platform_device *pdev); + int (*device_shutdown) (struct platform_device *pdev); + int (*device_idle) (struct platform_device *pdev); }; #endif -- cgit v1.2.3 From 074e61ec3751da9ab88ee66d3818574556c03489 Mon Sep 17 00:00:00 2001 From: James Morris Date: Wed, 10 Nov 2010 09:01:31 +1100 Subject: kernel: add roundup() code comment from akpm Add roundup() code comment from akpm. Signed-off-by: Andrew Morton Signed-off-by: James Morris --- include/linux/kernel.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index b526947bdf48..3f648d204c37 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -58,6 +58,8 @@ extern const char linux_proc_banner[]; #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) + +/* The `const' in roundup() prevents gcc-3.3 from calling __divdi3 */ #define roundup(x, y) ( \ { \ const typeof(y) __y = y; \ -- cgit v1.2.3 From da1d39e3903bc35be2b5e8d2116fdd5d337244d4 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 9 Nov 2010 17:47:02 +0900 Subject: mmc, sh: Move constants to sh_mmcif.h This moves some constants from sh_mmcif.c to sh_mmcif.h so that they can be used in sh_mmcif_boot_init(). It also alters the definition of SOFT_RST_OFF from (0 << 31) to ~SOFT_RST_ON (= ~(1 << 31)). The former seems bogus. The latter is consistent with the code in sh_mmcif_boot_init(). Cc: Yusuke Goda Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 39 ++++++++++++++++++++++++++++++++++----- 1 file changed, 34 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 5c99da1078aa..a6bfa5296495 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -59,6 +59,29 @@ struct sh_mmcif_plat_data { #define MMCIF_CE_HOST_STS2 0x0000004C #define MMCIF_CE_VERSION 0x0000007C +/* CE_BUF_ACC */ +#define BUF_ACC_DMAWEN (1 << 25) +#define BUF_ACC_DMAREN (1 << 24) +#define BUF_ACC_BUSW_32 (0 << 17) +#define BUF_ACC_BUSW_16 (1 << 17) +#define BUF_ACC_ATYP (1 << 16) + +/* CE_CLK_CTRL */ +#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ +#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ +#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ + (1 << 9) | (1 << 8)) /* resp busy timeout */ +#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ + (1 << 5) | (1 << 4)) /* read/write timeout */ +#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ + (1 << 1) | (1 << 0)) /* ccs timeout */ + +/* CE_VERSION */ +#define SOFT_RST_ON (1 << 31) +#define SOFT_RST_OFF ~SOFT_RST_ON + static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) { return readl(addr + reg); @@ -149,17 +172,23 @@ static inline void sh_mmcif_boot_init(void __iomem *base) /* reset */ tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000); + sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | SOFT_RST_ON); + sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & SOFT_RST_OFF); /* byte swap */ - sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000); + sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); /* Set block size in MMCIF hardware */ sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); - /* Enable the clock, set it to Bus clock/256 (about 325Khz)*/ - sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff); + /* Enable the clock, set it to Bus clock/256 (about 325Khz). + * It is unclear where 0x70000 comes from or if it is even needed. + * It is there for byte-compatibility with code that is known to + * work. + */ + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | + SCCSTO_29 | 0x70000); /* CMD0 */ sh_mmcif_boot_cmd(base, 0x00000040, 0); -- cgit v1.2.3 From 0eadcc09203349b11ca477ec367079b23d32ab91 Mon Sep 17 00:00:00 2001 From: Tatyana Brokhman Date: Mon, 1 Nov 2010 18:18:24 +0200 Subject: usb: USB3.0 ch11 definitions Adding hub SuperSpeed usb definitions as defined by ch10 of the USB3.0 spec. Signed-off-by: Tatyana Brokhman Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch11.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ include/linux/usb/hcd.h | 4 ++++ 2 files changed, 51 insertions(+) (limited to 'include') diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index 119194c85d10..10ec0699bea4 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -27,6 +27,13 @@ #define HUB_GET_TT_STATE 10 #define HUB_STOP_TT 11 +/* + * Hub class additional requests defined by USB 3.0 spec + * See USB 3.0 spec Table 10-6 + */ +#define HUB_SET_DEPTH 12 +#define HUB_GET_PORT_ERR_COUNT 13 + /* * Hub Class feature numbers * See USB 2.0 spec Table 11-17 @@ -55,6 +62,20 @@ #define USB_PORT_FEAT_INDICATOR 22 #define USB_PORT_FEAT_C_PORT_L1 23 +/* + * Port feature selectors added by USB 3.0 spec. + * See USB 3.0 spec Table 10-7 + */ +#define USB_PORT_FEAT_LINK_STATE 5 +#define USB_PORT_FEAT_U1_TIMEOUT 23 +#define USB_PORT_FEAT_U2_TIMEOUT 24 +#define USB_PORT_FEAT_C_LINK_STATE 25 +#define USB_PORT_FEAT_C_CONFIG_ERR 26 +#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 +#define USB_PORT_FEAT_BH_PORT_RESET 28 +#define USB_PORT_FEAT_C_BH_PORT_RESET 29 +#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 + /* * Hub Status and Hub Change results * See USB 2.0 spec Table 11-19 and Table 11-20 @@ -83,6 +104,32 @@ struct usb_port_status { /* bits 13 to 15 are reserved */ #define USB_PORT_STAT_SUPER_SPEED 0x8000 /* Linux-internal */ +/* + * Additions to wPortStatus bit field from USB 3.0 + * See USB 3.0 spec Table 10-10 + */ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000 +/* Valid only if port is enabled */ + +/* + * Definitions for PORT_LINK_STATE values + * (bits 5-8) in wPortStatus + */ +#define USB_SS_PORT_LS_U0 0x0000 +#define USB_SS_PORT_LS_U1 0x0020 +#define USB_SS_PORT_LS_U2 0x0040 +#define USB_SS_PORT_LS_U3 0x0060 +#define USB_SS_PORT_LS_SS_DISABLED 0x0080 +#define USB_SS_PORT_LS_RX_DETECT 0x00a0 +#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 +#define USB_SS_PORT_LS_POLLING 0x00e0 +#define USB_SS_PORT_LS_RECOVERY 0x0100 +#define USB_SS_PORT_LS_HOT_RESET 0x0120 +#define USB_SS_PORT_LS_COMP_MOD 0x0140 +#define USB_SS_PORT_LS_LOOPBACK 0x0160 + /* * wPortChange bit field * See USB 2.0 spec Table 11-22 diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 0b6e751ea0b1..dd6ee49a0844 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -471,6 +471,10 @@ extern void usb_ep0_reinit(struct usb_device *); /*-------------------------------------------------------------------------*/ +/* class requests from USB 3.0 hub spec, table 10-5 */ +#define SetHubDepth (0x3000 | HUB_SET_DEPTH) +#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT) + /* * Generic bandwidth allocation constants/support */ -- cgit v1.2.3 From af3b8881f4c9852eefe9c7f1a997b3ecf580561b Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Tue, 26 Oct 2010 14:13:52 +0100 Subject: ifx6x60: SPI protocol driver for Infineon 6x60 modem Prototype driver for the IFX6x60 series of SPI attached modems by Jim Stanley and Russ Gorby Signed-off-by: Russ Gorby [Some reworking and a major cleanup] Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/ifx_modem.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 include/linux/spi/ifx_modem.h (limited to 'include') diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h new file mode 100644 index 000000000000..a68f3b19d112 --- /dev/null +++ b/include/linux/spi/ifx_modem.h @@ -0,0 +1,14 @@ +#ifndef LINUX_IFX_MODEM_H +#define LINUX_IFX_MODEM_H + +struct ifx_modem_platform_data { + unsigned short rst_out; /* modem reset out */ + unsigned short pwr_on; /* power on */ + unsigned short rst_pmu; /* reset modem */ + unsigned short tx_pwr; /* modem power threshold */ + unsigned short srdy; /* SRDY */ + unsigned short mrdy; /* MRDY */ + unsigned short is_6160; /* Modem type */ +}; + +#endif -- cgit v1.2.3 From 304e12665a4a7b8b25dfe8c64fa4fd56a04a67ea Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Mon, 8 Nov 2010 20:33:20 +0300 Subject: serial: Add support for UART on VIA VT8500 and compatibles This adds a driver for the serial ports found in VIA and WonderMedia Systems-on-Chip. Interrupt-driven FIFO operation is implemented. The hardware also supports pure register-based operation (which is slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes long, DMA operation is probably not worth the hassle. Signed-off-by: Alexey Charkov Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 212eb4c67797..41603d690433 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -199,6 +199,9 @@ /* TI OMAP-UART */ #define PORT_OMAP 96 +/* VIA VT8500 SoC */ +#define PORT_VT8500 97 + #ifdef __KERNEL__ #include -- cgit v1.2.3 From a75d946f42ae1771424a9582129fc5182ff48a1b Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 4 Nov 2010 16:20:20 +0100 Subject: console: move for_each_console to linux/console.h Move it out of printk.c so that we can use it all over the code. There are some potential users which will be converted to that macro in next patches. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- include/linux/console.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/console.h b/include/linux/console.h index 95cf6f08a59d..875cfb1c8132 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -126,6 +126,12 @@ struct console { struct console *next; }; +/* + * for_each_console() allows you to iterate on each console + */ +#define for_each_console(con) \ + for (con = console_drivers; con != NULL; con = con->next) + extern int console_set_on_cmdline; extern int add_preferred_console(char *name, int idx, char *options); -- cgit v1.2.3 From 3dfbd044d0d99cad2fe50e4f6c79845703fa0558 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 4 Nov 2010 16:20:23 +0100 Subject: TTY: include termios.h in tty_driver.h We reference termios and termiox in tty_driver.h, but we do not include linux/termios.h where these are defined. Add the #include properly. Otherwise when we include tty_driver.h, we get compile errors. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: Greg KH Signed-off-by: Greg Kroah-Hartman --- include/linux/tty_driver.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index db2d227694da..09678ed370f8 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -235,6 +235,7 @@ #include #include #include +#include struct tty_struct; struct tty_driver; -- cgit v1.2.3 From e44dcb6c377529805bbaae505d5b333daab69111 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 12 Nov 2010 19:47:47 +0100 Subject: serial: mpc52xx: make printout for type more generic The printout for the type should be just "5xxx", so 512x users won't wonder why they have a mpc52xx-type UART. Signed-off-by: Wolfram Sang Cc: Grant Likely Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 41603d690433..9ff9b7db293b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -95,7 +95,7 @@ /* PPC CPM type number */ #define PORT_CPM 58 -/* MPC52xx type numbers */ +/* MPC52xx (and MPC512x) type numbers */ #define PORT_MPC52xx 59 /* IBM icom */ -- cgit v1.2.3 From 6ddf27cdbc218a412d7e993fdc08e30eec2042ce Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 15 Nov 2010 15:57:30 -0500 Subject: USB: make usb_mark_last_busy use pm_runtime_mark_last_busy Since the runtime-PM core already defines a .last_busy field in device.power, this patch uses it to replace the .last_busy field defined in usb_device and uses pm_runtime_mark_last_busy to implement usb_mark_last_busy. Signed-off-by: Ming Lei Reviewed-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index 35fe6ab222bb..7d22b3340a7f 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -20,6 +20,7 @@ #include /* for struct completion */ #include /* for current && schedule_timeout */ #include /* for struct mutex */ +#include /* for runtime PM */ struct usb_device; struct usb_driver; @@ -407,7 +408,6 @@ struct usb_tt; * @quirks: quirks of the whole device * @urbnum: number of URBs submitted for the whole device * @active_duration: total time device is not suspended - * @last_busy: time of last use * @autosuspend_delay: in jiffies * @connect_time: time device was first connected * @do_remote_wakeup: remote wakeup should be enabled @@ -481,7 +481,6 @@ struct usb_device { unsigned long active_duration; #ifdef CONFIG_PM - unsigned long last_busy; int autosuspend_delay; unsigned long connect_time; @@ -527,7 +526,7 @@ extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf); static inline void usb_mark_last_busy(struct usb_device *udev) { - udev->last_busy = jiffies; + pm_runtime_mark_last_busy(&udev->dev); } #else -- cgit v1.2.3 From fcc4a01eb8661226e80632327673f67bf6a5840b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 15 Nov 2010 15:57:51 -0500 Subject: USB: use the runtime-PM autosuspend implementation This patch (as1428) converts USB over to the new runtime-PM core autosuspend framework. One slightly awkward aspect of the conversion is that USB devices will now have two suspend-delay attributes: the old power/autosuspend file and the new power/autosuspend_delay_ms file. One expresses the delay time in seconds and the other in milliseconds, but otherwise they do the same thing. The old attribute can be deprecated and then removed eventually. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index 7d22b3340a7f..5ee2223af08c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -408,7 +408,6 @@ struct usb_tt; * @quirks: quirks of the whole device * @urbnum: number of URBs submitted for the whole device * @active_duration: total time device is not suspended - * @autosuspend_delay: in jiffies * @connect_time: time device was first connected * @do_remote_wakeup: remote wakeup should be enabled * @reset_resume: needs reset instead of resume @@ -481,7 +480,6 @@ struct usb_device { unsigned long active_duration; #ifdef CONFIG_PM - int autosuspend_delay; unsigned long connect_time; unsigned do_remote_wakeup:1; -- cgit v1.2.3 From 6b6e39a6a8da7234c538d14c43d3583da8875f9c Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Mon, 15 Nov 2010 23:13:18 +0100 Subject: driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index dd4895313468..1e2d335ab683 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -30,9 +30,8 @@ struct device_private; struct device_driver; struct driver_private; struct class; -struct class_private; +struct subsys_private; struct bus_type; -struct bus_type_private; struct device_node; struct bus_attribute { @@ -65,7 +64,7 @@ struct bus_type { const struct dev_pm_ops *pm; - struct bus_type_private *p; + struct subsys_private *p; }; extern int __must_check bus_register(struct bus_type *bus); @@ -213,7 +212,7 @@ struct class { const struct dev_pm_ops *pm; - struct class_private *p; + struct subsys_private *p; }; struct class_dev_iter { -- cgit v1.2.3 From a782d688e9c6f9ca9a7a9a28e8e2876969ddef53 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 24 Nov 2010 10:05:22 +0000 Subject: mmc: sh_mmcif: add DMA support The MMCIF controller on sh-mobile platforms can use the DMA controller for data transfers. Interface to the SH dmaengine driver to enable DMA. We also have to lower the maximum number of segments to match with the number od DMA descriptors on SuperH, this doesn't significantly affect driver's PIO performance. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index a6bfa5296495..f216a8879b58 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -14,8 +14,9 @@ #ifndef __SH_MMCIF_H__ #define __SH_MMCIF_H__ -#include #include +#include +#include /* * MMCIF : CE_CLK_CTRL [19:16] @@ -31,13 +32,19 @@ * 1111 : Peripheral clock (sup_pclk set '1') */ +struct sh_mmcif_dma { + struct sh_dmae_slave chan_priv_tx; + struct sh_dmae_slave chan_priv_rx; +}; + struct sh_mmcif_plat_data { void (*set_pwr)(struct platform_device *pdev, int state); void (*down_pwr)(struct platform_device *pdev); int (*get_cd)(struct platform_device *pdef); - u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ - unsigned long caps; - u32 ocr; + struct sh_mmcif_dma *dma; + u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ + unsigned long caps; + u32 ocr; }; #define MMCIF_CE_CMD_SET 0x00000000 -- cgit v1.2.3 From 85beb5869a4f6abb52a7cf8e01de6fa57e9ee47d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 24 Nov 2010 16:23:34 -0500 Subject: tracing/slab: Move kmalloc tracepoint out of inline code The tracepoint for kmalloc is in the slab inlined code which causes every instance of kmalloc to have the tracepoint. This patch moves the tracepoint out of the inline code to the slab C file, which removes a large number of inlined trace points. objdump -dr vmlinux.slab| grep 'jmpq.* Signed-off-by: Pekka Enberg --- include/linux/slab_def.h | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 791a502f6906..83203ae9390b 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -138,11 +138,12 @@ void *kmem_cache_alloc(struct kmem_cache *, gfp_t); void *__kmalloc(size_t size, gfp_t flags); #ifdef CONFIG_TRACING -extern void *kmem_cache_alloc_notrace(struct kmem_cache *cachep, gfp_t flags); +extern void *kmem_cache_alloc_trace(size_t size, + struct kmem_cache *cachep, gfp_t flags); extern size_t slab_buffer_size(struct kmem_cache *cachep); #else static __always_inline void * -kmem_cache_alloc_notrace(struct kmem_cache *cachep, gfp_t flags) +kmem_cache_alloc_trace(size_t size, struct kmem_cache *cachep, gfp_t flags) { return kmem_cache_alloc(cachep, flags); } @@ -179,10 +180,7 @@ found: #endif cachep = malloc_sizes[i].cs_cachep; - ret = kmem_cache_alloc_notrace(cachep, flags); - - trace_kmalloc(_THIS_IP_, ret, - size, slab_buffer_size(cachep), flags); + ret = kmem_cache_alloc_trace(size, cachep, flags); return ret; } @@ -194,14 +192,16 @@ extern void *__kmalloc_node(size_t size, gfp_t flags, int node); extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); #ifdef CONFIG_TRACING -extern void *kmem_cache_alloc_node_notrace(struct kmem_cache *cachep, - gfp_t flags, - int nodeid); +extern void *kmem_cache_alloc_node_trace(size_t size, + struct kmem_cache *cachep, + gfp_t flags, + int nodeid); #else static __always_inline void * -kmem_cache_alloc_node_notrace(struct kmem_cache *cachep, - gfp_t flags, - int nodeid) +kmem_cache_alloc_node_trace(size_t size, + struct kmem_cache *cachep, + gfp_t flags, + int nodeid) { return kmem_cache_alloc_node(cachep, flags, nodeid); } @@ -210,7 +210,6 @@ kmem_cache_alloc_node_notrace(struct kmem_cache *cachep, static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) { struct kmem_cache *cachep; - void *ret; if (__builtin_constant_p(size)) { int i = 0; @@ -234,13 +233,7 @@ found: #endif cachep = malloc_sizes[i].cs_cachep; - ret = kmem_cache_alloc_node_notrace(cachep, flags, node); - - trace_kmalloc_node(_THIS_IP_, ret, - size, slab_buffer_size(cachep), - flags, node); - - return ret; + return kmem_cache_alloc_node_trace(size, cachep, flags, node); } return __kmalloc_node(size, flags, node); } -- cgit v1.2.3 From ce6ada35bdf710d16582cc4869c26722547e6f11 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Thu, 25 Nov 2010 17:11:32 +0000 Subject: security: Define CAP_SYSLOG Privileged syslog operations currently require CAP_SYS_ADMIN. Split this off into a new CAP_SYSLOG privilege which we can sanely take away from a container through the capability bounding set. With this patch, an lxc container can be prevented from messing with the host's syslog (i.e. dmesg -c). Changelog: mar 12 2010: add selinux capability2:cap_syslog perm Changelog: nov 22 2010: . port to new kernel . add a WARN_ONCE if userspace isn't using CAP_SYSLOG Signed-off-by: Serge Hallyn Acked-by: Andrew G. Morgan Acked-By: Kees Cook Cc: James Morris Cc: Michael Kerrisk Cc: Stephen Smalley Cc: "Christopher J. PeBenito" Cc: Eric Paris Signed-off-by: James Morris --- include/linux/capability.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/capability.h b/include/linux/capability.h index 90012b9ddbf3..fb16a3699b99 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -246,7 +246,6 @@ struct cpu_vfs_cap_data { /* Allow configuration of the secure attention key */ /* Allow administration of the random device */ /* Allow examination and configuration of disk quotas */ -/* Allow configuring the kernel's syslog (printk behaviour) */ /* Allow setting the domainname */ /* Allow setting the hostname */ /* Allow calling bdflush() */ @@ -352,7 +351,11 @@ struct cpu_vfs_cap_data { #define CAP_MAC_ADMIN 33 -#define CAP_LAST_CAP CAP_MAC_ADMIN +/* Allow configuring the kernel's syslog (printk behaviour) */ + +#define CAP_SYSLOG 34 + +#define CAP_LAST_CAP CAP_SYSLOG #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) -- cgit v1.2.3 From dc88e46029486ed475c71fe1bb696d39511ac8fe Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 23 Nov 2010 17:50:31 -0500 Subject: lib: hex2bin converts ascii hexadecimal string to binary Similar to the kgdb_hex2mem() code, hex2bin converts a string to binary using the hex_to_bin() library call. Changelog: - Replace parameter names with src/dst (based on David Howell's comment) - Add 'const' where needed (based on David Howell's comment) - Replace int with size_t (based on David Howell's comment) Signed-off-by: Mimi Zohar Acked-by: Serge E. Hallyn Acked-by: David Howells Signed-off-by: James Morris --- include/linux/kernel.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index a35b4f7332f0..d0fbc043de60 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -265,6 +265,7 @@ static inline char *pack_hex_byte(char *buf, u8 byte) } extern int hex_to_bin(char ch); +extern void hex2bin(u8 *dst, const char *src, size_t count); /* * General tracing related utility functions - trace_printk(), -- cgit v1.2.3 From c749ba912e87ccebd674ae24b97462176c63732e Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 23 Nov 2010 18:54:16 -0500 Subject: key: add tpm_send command Add internal kernel tpm_send() command used to seal/unseal keys. Changelog: - replaced module_put in tpm_send() with new tpm_chip_put() wrapper (suggested by David Howells) - Make tpm_send() cmd argument a 'void *' (suggested by David Howells) Signed-off-by: David Safford Signed-off-by: Mimi Zohar Acked-by: David Howells Acked-by: Serge E. Hallyn Signed-off-by: James Morris --- include/linux/tpm.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/tpm.h b/include/linux/tpm.h index ac5d1c1285d9..fdc718abf83b 100644 --- a/include/linux/tpm.h +++ b/include/linux/tpm.h @@ -31,6 +31,7 @@ extern int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf); extern int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash); +extern int tpm_send(u32 chip_num, void *cmd, size_t buflen); #else static inline int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf) { return -ENODEV; @@ -38,5 +39,8 @@ static inline int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf) { static inline int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash) { return -ENODEV; } +static inline int tpm_send(u32 chip_num, void *cmd, size_t buflen) { + return -ENODEV; +} #endif #endif -- cgit v1.2.3 From d00a1c72f7f4661212299e6cb132dfa58030bcdb Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 23 Nov 2010 17:50:34 -0500 Subject: keys: add new trusted key-type Define a new kernel key-type called 'trusted'. Trusted keys are random number symmetric keys, generated and RSA-sealed by the TPM. The TPM only unseals the keys, if the boot PCRs and other criteria match. Userspace can only ever see encrypted blobs. Based on suggestions by Jason Gunthorpe, several new options have been added to support additional usages. The new options are: migratable= designates that the key may/may not ever be updated (resealed under a new key, new pcrinfo or new auth.) pcrlock=n extends the designated PCR 'n' with a random value, so that a key sealed to that PCR may not be unsealed again until after a reboot. keyhandle= specifies the sealing/unsealing key handle. keyauth= specifies the sealing/unsealing key auth. blobauth= specifies the sealed data auth. Implementation of a kernel reserved locality for trusted keys will be investigated for a possible future extension. Changelog: - Updated and added examples to Documentation/keys-trusted-encrypted.txt - Moved generic TPM constants to include/linux/tpm_command.h (David Howell's suggestion.) - trusted_defined.c: replaced kzalloc with kmalloc, added pcrlock failure error handling, added const qualifiers where appropriate. - moved to late_initcall - updated from hash to shash (suggestion by David Howells) - reduced worst stack usage (tpm_seal) from 530 to 312 bytes - moved documentation to Documentation directory (suggestion by David Howells) - all the other code cleanups suggested by David Howells - Add pcrlock CAP_SYS_ADMIN dependency (based on comment by Jason Gunthorpe) - New options: migratable, pcrlock, keyhandle, keyauth, blobauth (based on discussions with Jason Gunthorpe) - Free payload on failure to create key(reported/fixed by Roberto Sassu) - Updated Kconfig and other descriptions (based on Serge Hallyn's suggestion) - Replaced kzalloc() with kmalloc() (reported by Serge Hallyn) Signed-off-by: David Safford Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- include/keys/trusted-type.h | 31 +++++++++++++++++++++++++++++++ include/linux/tpm_command.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) create mode 100644 include/keys/trusted-type.h create mode 100644 include/linux/tpm_command.h (limited to 'include') diff --git a/include/keys/trusted-type.h b/include/keys/trusted-type.h new file mode 100644 index 000000000000..56f82e5c9975 --- /dev/null +++ b/include/keys/trusted-type.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2010 IBM Corporation + * Author: David Safford + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + */ + +#ifndef _KEYS_TRUSTED_TYPE_H +#define _KEYS_TRUSTED_TYPE_H + +#include +#include + +#define MIN_KEY_SIZE 32 +#define MAX_KEY_SIZE 128 +#define MAX_BLOB_SIZE 320 + +struct trusted_key_payload { + struct rcu_head rcu; + unsigned int key_len; + unsigned int blob_len; + unsigned char migratable; + unsigned char key[MAX_KEY_SIZE + 1]; + unsigned char blob[MAX_BLOB_SIZE]; +}; + +extern struct key_type key_type_trusted; + +#endif /* _KEYS_TRUSTED_TYPE_H */ diff --git a/include/linux/tpm_command.h b/include/linux/tpm_command.h new file mode 100644 index 000000000000..727512e249b5 --- /dev/null +++ b/include/linux/tpm_command.h @@ -0,0 +1,28 @@ +#ifndef __LINUX_TPM_COMMAND_H__ +#define __LINUX_TPM_COMMAND_H__ + +/* + * TPM Command constants from specifications at + * http://www.trustedcomputinggroup.org + */ + +/* Command TAGS */ +#define TPM_TAG_RQU_COMMAND 193 +#define TPM_TAG_RQU_AUTH1_COMMAND 194 +#define TPM_TAG_RQU_AUTH2_COMMAND 195 +#define TPM_TAG_RSP_COMMAND 196 +#define TPM_TAG_RSP_AUTH1_COMMAND 197 +#define TPM_TAG_RSP_AUTH2_COMMAND 198 + +/* Command Ordinals */ +#define TPM_ORD_GETRANDOM 70 +#define TPM_ORD_OSAP 11 +#define TPM_ORD_OIAP 10 +#define TPM_ORD_SEAL 23 +#define TPM_ORD_UNSEAL 24 + +/* Other constants */ +#define SRKHANDLE 0x40000000 +#define TPM_NONCE_SIZE 20 + +#endif -- cgit v1.2.3 From 7e70cb4978507cf31d76b90e4cfb4c28cad87f0c Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 23 Nov 2010 18:55:35 -0500 Subject: keys: add new key-type encrypted Define a new kernel key-type called 'encrypted'. Encrypted keys are kernel generated random numbers, which are encrypted/decrypted with a 'trusted' symmetric key. Encrypted keys are created/encrypted/decrypted in the kernel. Userspace only ever sees/stores encrypted blobs. Changelog: - bug fix: replaced master-key rcu based locking with semaphore (reported by David Howells) - Removed memset of crypto_shash_digest() digest output - Replaced verification of 'key-type:key-desc' using strcspn(), with one based on string constants. - Moved documentation to Documentation/keys-trusted-encrypted.txt - Replace hash with shash (based on comments by David Howells) - Make lengths/counts size_t where possible (based on comments by David Howells) Could not convert most lengths, as crypto expects 'unsigned int' (size_t: on 32 bit is defined as unsigned int, but on 64 bit is unsigned long) - Add 'const' where possible (based on comments by David Howells) - allocate derived_buf dynamically to support arbitrary length master key (fixed by Roberto Sassu) - wait until late_initcall for crypto libraries to be registered - cleanup security/Kconfig - Add missing 'update' keyword (reported/fixed by Roberto Sassu) - Free epayload on failure to create key (reported/fixed by Roberto Sassu) - Increase the data size limit (requested by Roberto Sassu) - Crypto return codes are always 0 on success and negative on failure, remove unnecessary tests. - Replaced kzalloc() with kmalloc() Signed-off-by: Mimi Zohar Signed-off-by: David Safford Reviewed-by: Roberto Sassu Signed-off-by: James Morris --- include/keys/encrypted-type.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 include/keys/encrypted-type.h (limited to 'include') diff --git a/include/keys/encrypted-type.h b/include/keys/encrypted-type.h new file mode 100644 index 000000000000..95855017a32b --- /dev/null +++ b/include/keys/encrypted-type.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2010 IBM Corporation + * Author: Mimi Zohar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + */ + +#ifndef _KEYS_ENCRYPTED_TYPE_H +#define _KEYS_ENCRYPTED_TYPE_H + +#include +#include + +struct encrypted_key_payload { + struct rcu_head rcu; + char *master_desc; /* datablob: master key name */ + char *datalen; /* datablob: decrypted key length */ + u8 *iv; /* datablob: iv */ + u8 *encrypted_data; /* datablob: encrypted data */ + unsigned short datablob_len; /* length of datablob */ + unsigned short decrypted_datalen; /* decrypted data length */ + u8 decrypted_data[0]; /* decrypted data + datablob + hmac */ +}; + +extern struct key_type key_type_encrypted; + +#endif /* _KEYS_ENCRYPTED_TYPE_H */ -- cgit v1.2.3 From 1ae0affedce1d3e401991fbe7f2674753f0a7641 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 26 Nov 2010 23:02:58 +0000 Subject: mmc, sh: Correct value for reset This resolves a regression that I introduced in "mmc, sh: Move constants to sh_mmcif.h". Having examined the manual and tested the code on an AP4EVB board it seems that the correct sequence is. 1) Write 1 to bit 31 and zeros to all other bits 2) Write zero to all bits Cc: Yusuke Goda Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index a6bfa5296495..342ec1a38684 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -80,7 +80,7 @@ struct sh_mmcif_plat_data { /* CE_VERSION */ #define SOFT_RST_ON (1 << 31) -#define SOFT_RST_OFF ~SOFT_RST_ON +#define SOFT_RST_OFF 0 static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) { @@ -168,12 +168,9 @@ static inline int sh_mmcif_boot_do_read(void __iomem *base, static inline void sh_mmcif_boot_init(void __iomem *base) { - unsigned long tmp; - /* reset */ - tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | SOFT_RST_ON); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & SOFT_RST_OFF); + sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON); + sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF); /* byte swap */ sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); -- cgit v1.2.3 From 22efa0fee32d9e7f6f6fbc396a872b5708d86048 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Sat, 27 Nov 2010 00:11:55 +0000 Subject: sh, mmc: Use defines when setting CE_CLK_CTRL The 16-19th bits of CE_CLK_CTRL set the MMC clock frequency. Cc: Yusuke Goda Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 342ec1a38684..ffabf8c0a531 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -70,6 +70,9 @@ struct sh_mmcif_plat_data { #define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ #define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) #define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define CLKDIV_4 (1<<16) /* mmc clock frequency. + * n: bus clock/(2^(n+1)) */ +#define CLKDIV_256 (7<<16) /* mmc clock frequency. (see above) */ #define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ #define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ (1 << 9) | (1 << 8)) /* resp busy timeout */ @@ -178,14 +181,10 @@ static inline void sh_mmcif_boot_init(void __iomem *base) /* Set block size in MMCIF hardware */ sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); - /* Enable the clock, set it to Bus clock/256 (about 325Khz). - * It is unclear where 0x70000 comes from or if it is even needed. - * It is there for byte-compatibility with code that is known to - * work. - */ + /* Enable the clock, set it to Bus clock/256 (about 325Khz). */ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, - CLK_ENABLE | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | - SCCSTO_29 | 0x70000); + CLK_ENABLE | CLKDIV_256 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); /* CMD0 */ sh_mmcif_boot_cmd(base, 0x00000040, 0); @@ -210,7 +209,9 @@ static inline void sh_mmcif_boot_slurp(void __iomem *base, unsigned long tmp; /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ - sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff); + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); /* CMD9 - Get CSD */ sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); -- cgit v1.2.3 From 62a8c3a32e4143812ed8e0f3783ef1ea40dc87e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 24 Nov 2010 19:33:43 +0000 Subject: Staging: sep: handle the rar definition stuff in the header SEP isn't the only driver that may need to handle both cases easily Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/rar_register.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include') diff --git a/include/linux/rar_register.h b/include/linux/rar_register.h index ffa805780f85..5c6118189363 100644 --- a/include/linux/rar_register.h +++ b/include/linux/rar_register.h @@ -34,11 +34,27 @@ struct rar_device; +#if defined(CONFIG_RAR_REGISTER) int register_rar(int num, int (*callback)(unsigned long data), unsigned long data); void unregister_rar(int num); int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end); int rar_lock(int rar_index); +#else +extern void unregister_rar(int num) { } +extern int rar_lock(int rar_index) { return -EIO; } + +extern inline int register_rar(int num, + int (*callback)(unsigned long data), unsigned long data) +{ + return -ENODEV; +} + +extern int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end) +{ + return -ENODEV; +} +#endif /* RAR_REGISTER */ #endif /* __KERNEL__ */ #endif /* _RAR_REGISTER_H */ -- cgit v1.2.3 From 498cb95175c29ed96bf32f30df2d11ec1c7f3879 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 30 Nov 2010 14:11:49 -0800 Subject: OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbers Define MDR1 register serial definitions used in serial and bluetooth drivers. Change magic number to ones defined in serial_reg for omap1/2 serial driver. Remove redefined MDR1 register definitions in omap-serial driver. Signed-off-by: Andrei Emeltchenko Acked-by: G, Manjunath Kondaiah Acked-by: Govindraj.R Acked-by: Greg Kroah-Hartman Signed-off-by: Tony Lindgren --- include/linux/serial_reg.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index c7a0ce11cd47..6f3823474e6c 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -341,5 +341,17 @@ #define UART_OMAP_SYSS 0x16 /* System status register */ #define UART_OMAP_WER 0x17 /* Wake-up enable register */ +/* + * These are the definitions for the MDR1 register + */ +#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */ +#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */ +#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */ +#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */ +#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */ +#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ +#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ +#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ + #endif /* _LINUX_SERIAL_REG_H */ -- cgit v1.2.3 From 662b083a87a3489f3f19c6e0651c1b99b0de5df0 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 30 Nov 2010 14:11:49 -0800 Subject: omap: Serial: Define register access modes in LCR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Access to some registers depends on register access mode Three different modes are available for OMAP (at least) • Operational mode LCR_REG[7] = 0x0 • Configuration mode A LCR_REG[7] = 0x1 and LCR_REG[7:0]! = 0xBF • Configuration mode B LCR_REG[7] = 0x1 and LCR_REG[7:0] = 0xBF Define access modes and remove redefinitions and magic numbers in serial drivers (and later in bluetooth driver). Signed-off-by: Andrei Emeltchenko Acked-by: Govindraj.R Acked-by: Greg Kroah-Hartman Signed-off-by: Tony Lindgren --- include/linux/serial_reg.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index 6f3823474e6c..3ecb71a9e505 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -99,6 +99,13 @@ #define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ #define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ +/* + * Access to some registers depends on register access / configuration + * mode. + */ +#define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */ +#define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */ + #define UART_MCR 4 /* Out: Modem Control Register */ #define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */ #define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */ -- cgit v1.2.3 From ad9c2b048b605fbc8d50526e330b88abdd631ab2 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Tue, 30 Nov 2010 11:06:47 +0900 Subject: security: Fix comment of security_key_permission Comment for return value of security_key_permission() has been wrong since it was added in 2.6.15. Signed-off-by: Tetsuo Handa Signed-off-by: James Morris --- include/linux/security.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/security.h b/include/linux/security.h index fd4d55fb8845..e7d89b0c1fd8 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1058,8 +1058,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @cred points to the credentials to provide the context against which to * evaluate the security data on the key. * @perm describes the combination of permissions required of this key. - * Return 1 if permission granted, 0 if permission denied and -ve it the - * normal permissions model should be effected. + * Return 0 if permission is granted, -ve error otherwise. * @key_getsecurity: * Get a textual representation of the security context attached to a key * for the purposes of honouring KEYCTL_GETSECURITY. This function -- cgit v1.2.3 From c41ab6a1b9028de33e74101cb0aae13098a56fdb Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 29 Nov 2010 15:47:09 -0500 Subject: flex_array: fix flex_array_put_ptr macro to be valid C MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using flex_array_put_ptr() results in a compile error "error: lvalue required as unary ‘&’ operand" fix the casting order to fix this. Signed-off-by: Eric Paris --- include/linux/flex_array.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h index 631b77f2ac70..70e4efabe0fb 100644 --- a/include/linux/flex_array.h +++ b/include/linux/flex_array.h @@ -71,7 +71,7 @@ void *flex_array_get(struct flex_array *fa, unsigned int element_nr); int flex_array_shrink(struct flex_array *fa); #define flex_array_put_ptr(fa, nr, src, gfp) \ - flex_array_put(fa, nr, &(void *)(src), gfp) + flex_array_put(fa, nr, (void *)&(src), gfp) void *flex_array_get_ptr(struct flex_array *fa, unsigned int element_nr); -- cgit v1.2.3 From 7fc56f0d9908fe140a01387d59954e3d0a2e7744 Mon Sep 17 00:00:00 2001 From: Luo Andy Date: Tue, 23 Nov 2010 10:41:21 +0800 Subject: usb: gadget: langwell_udc: add usb test mode support This patch adds test mode support for Langwell gadget driver. Signed-off-by: Henry Yuan Signed-off-by: Andy Luo Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index f917bbbc8901..ab461948b579 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -123,6 +123,16 @@ #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ +/* + * Test Mode Selectors + * See USB 2.0 spec Table 9-7 + */ +#define TEST_J 1 +#define TEST_K 2 +#define TEST_SE0_NAK 3 +#define TEST_PACKET 4 +#define TEST_FORCE_EN 5 + /* * New Feature Selectors as added by USB 3.0 * See USB 3.0 spec Table 9-6 -- cgit v1.2.3 From b029ffafe89cf4b97cf39e0225a5205cbbf9e02f Mon Sep 17 00:00:00 2001 From: Hemanth V Date: Tue, 30 Nov 2010 23:03:54 -0800 Subject: Input: add CMA3000 accelerometer driver Add support for CMA3000 Tri-axis accelerometer, which supports Motion detect, Measurement and Free fall modes. CMA3000 supports both I2C/SPI bus for communication, currently the driver supports I2C based communication. Signed-off-by: Hemanth V Reviewed-by: Jonathan Cameron Reviewed-by: Sergio Aguirre Reviewed-by: Shubhrajyoti Signed-off-by: Dmitry Torokhov --- include/linux/input/cma3000.h | 59 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 include/linux/input/cma3000.h (limited to 'include') diff --git a/include/linux/input/cma3000.h b/include/linux/input/cma3000.h new file mode 100644 index 000000000000..cbbaac27d311 --- /dev/null +++ b/include/linux/input/cma3000.h @@ -0,0 +1,59 @@ +/* + * VTI CMA3000_Dxx Accelerometer driver + * + * Copyright (C) 2010 Texas Instruments + * Author: Hemanth V + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef _LINUX_CMA3000_H +#define _LINUX_CMA3000_H + +#define CMAMODE_DEFAULT 0 +#define CMAMODE_MEAS100 1 +#define CMAMODE_MEAS400 2 +#define CMAMODE_MEAS40 3 +#define CMAMODE_MOTDET 4 +#define CMAMODE_FF100 5 +#define CMAMODE_FF400 6 +#define CMAMODE_POFF 7 + +#define CMARANGE_2G 2000 +#define CMARANGE_8G 8000 + +/** + * struct cma3000_i2c_platform_data - CMA3000 Platform data + * @fuzz_x: Noise on X Axis + * @fuzz_y: Noise on Y Axis + * @fuzz_z: Noise on Z Axis + * @g_range: G range in milli g i.e 2000 or 8000 + * @mode: Operating mode + * @mdthr: Motion detect threshold value + * @mdfftmr: Motion detect and free fall time value + * @ffthr: Free fall threshold value + */ + +struct cma3000_platform_data { + int fuzz_x; + int fuzz_y; + int fuzz_z; + int g_range; + uint8_t mode; + uint8_t mdthr; + uint8_t mdfftmr; + uint8_t ffthr; + unsigned long irqflags; +}; + +#endif -- cgit v1.2.3 From 8348c259dd6a6019a8fa01b0a3443409480f7b9d Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 22 Nov 2010 17:12:15 -0800 Subject: arm/pxa2xx: reorgazine SSP and SPI header files The PXA-SPI driver relies on some files / defines which are arm specific and are within the ARM tree. The CE4100 SoC which is x86 has also the SPI core. This patch moves the ssp and spi files from arm/mach-pxa and plat-pxa to include/linux where the CE4100 can access them. This move got verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie --- include/linux/pxa2xx_ssp.h | 187 +++++++++++++++++++++++++++++++++++++++++ include/linux/spi/pxa2xx_spi.h | 49 +++++++++++ 2 files changed, 236 insertions(+) create mode 100644 include/linux/pxa2xx_ssp.h create mode 100644 include/linux/spi/pxa2xx_spi.h (limited to 'include') diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h new file mode 100644 index 000000000000..84465d4a51b7 --- /dev/null +++ b/include/linux/pxa2xx_ssp.h @@ -0,0 +1,187 @@ +/* + * pxa2xx_ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver supports the following PXA CPU/SSP ports:- + * + * PXA250 SSP + * PXA255 SSP, NSSP + * PXA26x SSP, NSSP, ASSP + * PXA27x SSP1, SSP2, SSP3 + * PXA3xx SSP1, SSP2, SSP3, SSP4 + */ + +#ifndef __LINUX_SSP_H +#define __LINUX_SSP_H + +#include +#include + +/* + * SSP Serial Port Registers + * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. + * PXA255, PXA26x and PXA27x have extra ports, registers and bits. + */ + +#define SSCR0 (0x00) /* SSP Control Register 0 */ +#define SSCR1 (0x04) /* SSP Control Register 1 */ +#define SSSR (0x08) /* SSP Status Register */ +#define SSITR (0x0C) /* SSP Interrupt Test Register */ +#define SSDR (0x10) /* SSP Data Write/Data Read Register */ + +#define SSTO (0x28) /* SSP Time Out Register */ +#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ +#define SSTSA (0x30) /* SSP Tx Timeslot Active */ +#define SSRSA (0x34) /* SSP Rx Timeslot Active */ +#define SSTSS (0x38) /* SSP Timeslot Status */ +#define SSACD (0x3C) /* SSP Audio Clock Divider */ +#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ + +/* Common PXA2xx bits first */ +#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ +#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ +#define SSCR0_National (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */ + +/* PXA27x, PXA3xx */ +#define SSCR0_EDSS (1 << 20) /* Extended data size select */ +#define SSCR0_NCS (1 << 21) /* Network clock select */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ +#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ +#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ +#define SSCR0_ACS (1 << 30) /* Audio clock select */ +#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ + + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ +#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */ +#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */ + +/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ +#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ +#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ +#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ +#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ +#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ +#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ +#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ +#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ +#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ +#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ +#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ +#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ +#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ +#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ +#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ +#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ +#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ + +#define SSSR_BCE (1 << 23) /* Bit Count Error */ +#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ +#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ +#define SSSR_EOC (1 << 20) /* End Of Chain */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ +#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ + + +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ + +/* PXA3xx */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_TIMING_MASK (0x7f8001f0) + +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ +#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ + +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, + PXA168_SSP, +}; + +struct ssp_device { + struct platform_device *pdev; + struct list_head node; + + struct clk *clk; + void __iomem *mmio_base; + unsigned long phys_base; + + const char *label; + int port_id; + int type; + int use_count; + int irq; + int drcmr_rx; + int drcmr_tx; +}; + +/** + * pxa_ssp_write_reg - Write to a SSP register + * + * @dev: SSP device to access + * @reg: Register to write to + * @val: Value to be written. + */ +static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) +{ + __raw_writel(val, dev->mmio_base + reg); +} + +/** + * pxa_ssp_read_reg - Read from a SSP register + * + * @dev: SSP device to access + * @reg: Register to read from + */ +static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) +{ + return __raw_readl(dev->mmio_base + reg); +} + +struct ssp_device *pxa_ssp_request(int port, const char *label); +void pxa_ssp_free(struct ssp_device *); +#endif diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h new file mode 100644 index 000000000000..471ed6889113 --- /dev/null +++ b/include/linux/spi/pxa2xx_spi.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __linux_pxa2xx_spi_h +#define __linux_pxa2xx_spi_h + +#include +#include + +#define PXA2XX_CS_ASSERT (0x01) +#define PXA2XX_CS_DEASSERT (0x02) + +/* device.platform_data for SSP controller devices */ +struct pxa2xx_spi_master { + u32 clock_enable; + u16 num_chipselect; + u8 enable_dma; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout; + u8 enable_loopback; + int gpio_cs; + void (*cs_control)(u32 command); +}; + +extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); + +#endif -- cgit v1.2.3 From d6ea3df0d470fb9260db93883f97764cf9f0e562 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 24 Nov 2010 10:17:14 +0100 Subject: spi/pxa2xx: Add CE4100 support Sodaville's SPI controller is very much the same as in PXA25x. The difference: - The RX/TX FIFO is only 4 words deep instead of 16 - No DMA support - The SPI controller offers a CS functionality Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie --- include/linux/spi/pxa2xx_spi.h | 105 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 104 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index 471ed6889113..d3e1075f7b60 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -19,7 +19,6 @@ #define __linux_pxa2xx_spi_h #include -#include #define PXA2XX_CS_ASSERT (0x01) #define PXA2XX_CS_DEASSERT (0x02) @@ -44,6 +43,110 @@ struct pxa2xx_spi_chip { void (*cs_control)(u32 command); }; +#ifdef CONFIG_ARCH_PXA + +#include +#include + extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); +#else +/* + * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or + * plat/ include path. + * The CE4100 does not provide DMA support. This bits are here to let the driver + * compile and will never be used. Maybe we get DMA support at a later point in + * time. + */ + +#define DCSR(n) (n) +#define DSADR(n) (n) +#define DTADR(n) (n) +#define DCMD(n) (n) +#define DRCMR(n) (n) + +#define DCSR_RUN (1 << 31) /* Run Bit */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable */ +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt */ + +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid */ +#define DRCMR_CHLNUM 0x1f /* mask for Channel Number */ + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor */ +#define DDADR_STOP (1 << 0) /* Stop */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* + * Descriptor structure for PXA's DMA engine + * Note: this structure must always be aligned to a 16-byte boundary. + */ + +typedef enum { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +} pxa_dma_prio; + +/* + * DMA registration + */ + +static inline int pxa_request_dma(char *name, + pxa_dma_prio prio, + void (*irq_handler)(int, void *), + void *data) +{ + return -ENODEV; +} + +static inline void pxa_free_dma(int dma_ch) +{ +} + +/* + * The CE4100 does not have the clk framework implemented and SPI clock can + * not be switched on/off or the divider changed. + */ +static inline void clk_disable(struct clk *clk) +{ +} + +static inline int clk_enable(struct clk *clk) +{ + return 0; +} + +static inline unsigned long clk_get_rate(struct clk *clk) +{ + return 3686400; +} + +#endif #endif -- cgit v1.2.3 From d0777f2c3eda180e3fc549e0efbe741014f17689 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 22 Nov 2010 17:12:16 -0800 Subject: spi/pxa2xx: Consider CE4100's FIFO depth For PXA the default threshold is FIFO_DEPTH / 2. Adjust this value for CE4100. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie --- include/linux/pxa2xx_ssp.h | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 84465d4a51b7..c3aa334cbb9b 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -71,10 +71,6 @@ #define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ #define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ #define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ -#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ -#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ #define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ #define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ @@ -82,8 +78,32 @@ #define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ #define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ #define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ -#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */ -#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */ + +#ifdef CONFIG_ARCH_PXA +#define RX_THRESH_DFLT 8 +#define TX_THRESH_DFLT 8 + +#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */ +#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */ + +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#else + +#define RX_THRESH_DFLT 2 +#define TX_THRESH_DFLT 2 + +#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */ +#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */ + +#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */ +#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */ +#endif /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ -- cgit v1.2.3 From 676dac4b1bee0469d6932f698aeb77e8489f5861 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Thu, 2 Dec 2010 06:43:39 -0800 Subject: This patch adds a new security attribute to Smack called SMACK64EXEC. It defines label that is used while task is running. Exception: in smack_task_wait() child task is checked for write access to parent task using label inherited from the task that forked it. Fixed issues from previous submit: - SMACK64EXEC was not read when SMACK64 was not set. - inode security blob was not updated after setting SMACK64EXEC - inode security blob was not updated when removing SMACK64EXEC --- include/linux/xattr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/xattr.h b/include/linux/xattr.h index f1e5bde4b35a..351c7901d74a 100644 --- a/include/linux/xattr.h +++ b/include/linux/xattr.h @@ -40,9 +40,11 @@ #define XATTR_SMACK_SUFFIX "SMACK64" #define XATTR_SMACK_IPIN "SMACK64IPIN" #define XATTR_SMACK_IPOUT "SMACK64IPOUT" +#define XATTR_SMACK_EXEC "SMACK64EXEC" #define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX #define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN #define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT +#define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC #define XATTR_CAPS_SUFFIX "capability" #define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX -- cgit v1.2.3 From 2a8626a9e2d86d114a2d9f813a1acebf9d53dd10 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 22 Nov 2010 17:12:17 -0800 Subject: spi/pxa2xx: Add chipselect support for Sodaville The SPI core on Sodaville supports chip selects. Its configuration moved into the SSSR register at bit 0 and 1. Thus Sodaville can be hooked up with up to 4 devices. This patch ensures that the bits which are otherwiese reserved are only touched on Sodaville and not on any other PXAs. Also it makes sure that the status register does not lose the CS information while clearing the ROR bit. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie --- include/linux/pxa2xx_ssp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index c3aa334cbb9b..2f691e4e6222 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -72,6 +72,7 @@ #define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ #define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */ #define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ #define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ #define SSSR_BSY (1 << 4) /* SSP Busy */ @@ -160,6 +161,7 @@ enum pxa_ssp_type { PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ PXA27x_SSP, PXA168_SSP, + CE4100_SSP, }; struct ssp_device { -- cgit v1.2.3 From 02c048b919455aaa38628563cdcc2e691c8a9f53 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 7 Dec 2010 20:16:56 +0100 Subject: fuse: allow batching of FORGET requests Terje Malmedal reports that a fuse filesystem with 32 million inodes on a machine with lots of memory can take up to 30 minutes to process FORGET requests when all those inodes are evicted from the icache. To solve this, create a BATCH_FORGET request that allows up to about 8000 FORGET requests to be sent in a single message. This request is only sent if userspace supports interface version 7.16 or later, otherwise fall back to sending individual FORGET messages. Reported-by: Terje Malmedal Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index c3c578e09833..cf11881f4938 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -41,6 +41,9 @@ * 7.15 * - add store notify * - add retrieve notify + * + * 7.16 + * - add BATCH_FORGET request */ #ifndef _LINUX_FUSE_H @@ -72,7 +75,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 15 +#define FUSE_KERNEL_MINOR_VERSION 16 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -256,6 +259,7 @@ enum fuse_opcode { FUSE_IOCTL = 39, FUSE_POLL = 40, FUSE_NOTIFY_REPLY = 41, + FUSE_BATCH_FORGET = 42, /* CUSE specific operations */ CUSE_INIT = 4096, @@ -290,6 +294,16 @@ struct fuse_forget_in { __u64 nlookup; }; +struct fuse_forget_one { + __u64 nodeid; + __u64 nlookup; +}; + +struct fuse_batch_forget_in { + __u32 count; + __u32 dummy; +}; + struct fuse_getattr_in { __u32 getattr_flags; __u32 dummy; -- cgit v1.2.3 From 1baa26b2be92fe9917e2f7ef46d423b5dfa4da71 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 7 Dec 2010 20:16:56 +0100 Subject: fuse: fix ioctl ABI In kernel ABI version 7.16 and later FUSE_IOCTL_RETRY reply from a unrestricted IOCTL request shall return with an array of 'struct fuse_ioctl_iovec' instead of 'struct iovec'. This fixes the ABI ambiguity of 32bit vs. 64bit. Reported-by: "ccmail111" Signed-off-by: Miklos Szeredi CC: Tejun Heo --- include/linux/fuse.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index cf11881f4938..d464de53db43 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -44,6 +44,9 @@ * * 7.16 * - add BATCH_FORGET request + * - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct + * fuse_ioctl_iovec' instead of ambiguous 'struct iovec' + * - add FUSE_IOCTL_32BIT flag */ #ifndef _LINUX_FUSE_H @@ -203,12 +206,14 @@ struct fuse_file_lock { * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed * FUSE_IOCTL_RETRY: retry with new iovecs + * FUSE_IOCTL_32BIT: 32bit ioctl * * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs */ #define FUSE_IOCTL_COMPAT (1 << 0) #define FUSE_IOCTL_UNRESTRICTED (1 << 1) #define FUSE_IOCTL_RETRY (1 << 2) +#define FUSE_IOCTL_32BIT (1 << 3) #define FUSE_IOCTL_MAX_IOV 256 @@ -524,6 +529,11 @@ struct fuse_ioctl_in { __u32 out_size; }; +struct fuse_ioctl_iovec { + __u64 base; + __u64 len; +}; + struct fuse_ioctl_out { __s32 result; __u32 flags; -- cgit v1.2.3 From 5c6d1125f8dbd1bfef39e38fbc2837003be78a59 Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 7 Dec 2010 13:34:01 +0200 Subject: Smack: Transmute labels on specified directories In a situation where Smack access rules allow processes with multiple labels to write to a directory it is easy to get into a situation where the directory gets cluttered with files that the owner can't deal with because while they could be written to the directory a process at the label of the directory can't write them. This is generally the desired behavior, but when it isn't it is a real issue. This patch introduces a new attribute SMACK64TRANSMUTE that instructs Smack to create the file with the label of the directory under certain circumstances. A new access mode, "t" for transmute, is made available to Smack access rules, which are expanded from "rwxa" to "rwxat". If a file is created in a directory marked as transmutable and if access was granted to perform the operation by a rule that included the transmute mode, then the file gets the Smack label of the directory instead of the Smack label of the creating process. Note that this is equivalent to creating an empty file at the label of the directory and then having the other process write to it. The transmute scheme requires that both the access rule allows transmutation and that the directory be explicitly marked. Signed-off-by: Jarkko Sakkinen Signed-off-by: Casey Schaufler --- include/linux/xattr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/xattr.h b/include/linux/xattr.h index 351c7901d74a..e6131ef98d8f 100644 --- a/include/linux/xattr.h +++ b/include/linux/xattr.h @@ -41,10 +41,12 @@ #define XATTR_SMACK_IPIN "SMACK64IPIN" #define XATTR_SMACK_IPOUT "SMACK64IPOUT" #define XATTR_SMACK_EXEC "SMACK64EXEC" +#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE" #define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX #define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN #define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT #define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC +#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE #define XATTR_CAPS_SUFFIX "capability" #define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX -- cgit v1.2.3 From 9f843706bb87837b823228467f4f83973fd110e9 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 6 Dec 2010 00:12:44 +0000 Subject: mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h Allow MMCIF_PROGRESS_* to be shared. Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index ffabf8c0a531..6a98e97c49f8 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -97,6 +97,9 @@ static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) #define SH_MMCIF_BBS 512 /* boot block size */ +enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT, + MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE }; + static inline void sh_mmcif_boot_cmd_send(void __iomem *base, unsigned long cmd, unsigned long arg) { -- cgit v1.2.3 From 54b384634f7083bcacf9a9ed2e6f4c3d0a246e49 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 6 Dec 2010 00:12:45 +0000 Subject: mmc, sh: Remove sh_mmcif_boot_slurp() As the only caller of sh_mmcif_boot_do_read() is sh_mmcif_boot_slurp() the configuration portion of sh_mmcif_boot_slurp() can be merged into sh_mmcif_boot_do_read(). Once this is done sh_mmcif_boot_slurp() is only a call to sh_mmcif_boot_do_read() with platform specific information - the offset that images are stored on MMC. So make the sh_mmcif_boot_do_read() call directly from platform code and remove sh_mmcif_boot_slurp() altogether. Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 34 +++++++++++----------------------- 1 file changed, 11 insertions(+), 23 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 6a98e97c49f8..cfcc6e320e2f 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -162,6 +162,17 @@ static inline int sh_mmcif_boot_do_read(void __iomem *base, unsigned long k; int ret = 0; + /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); + + /* CMD9 - Get CSD */ + sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); + + /* CMD7 - Select the card */ + sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000); + /* CMD16 - Set the block size */ sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS); @@ -205,27 +216,4 @@ static inline void sh_mmcif_boot_init(void __iomem *base) sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000); } -static inline void sh_mmcif_boot_slurp(void __iomem *base, - unsigned char *buf, - unsigned long no_bytes) -{ - unsigned long tmp; - - /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ - sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, - CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | - SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); - - /* CMD9 - Get CSD */ - sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); - - /* CMD7 - Select the card */ - sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000); - - tmp = no_bytes / SH_MMCIF_BBS; - tmp += (no_bytes % SH_MMCIF_BBS) ? 1 : 0; - - sh_mmcif_boot_do_read(base, 512, tmp, buf); -} - #endif /* __SH_MMCIF_H__ */ -- cgit v1.2.3 From 5bea7660bba973dc5e8e9d92b11fb1dd5b524ebf Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 7 Dec 2010 23:02:48 -0800 Subject: HID: add hid_hw_open/close/power() handlers Instead of exposing the guts of hid->ll_driver relationship to HID sub-drivers provide these helpers to encapsulate the details. Signed-off-by: Dmitry Torokhov Signed-off-by: Jiri Kosina --- include/linux/hid.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index bb0f56f5c01e..e2af195d8b46 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -820,6 +820,49 @@ static inline void hid_hw_stop(struct hid_device *hdev) hdev->ll_driver->stop(hdev); } +/** + * hid_hw_open - signal underlaying HW to start delivering events + * + * @hdev: hid device + * + * Tell underlying HW to start delivering events from the device. + * This function should be called sometime after successful call + * to hid_hiw_start(). + */ +static inline int __must_check hid_hw_open(struct hid_device *hdev) +{ + return hdev->ll_driver->open(hdev); +} + +/** + * hid_hw_close - signal underlaying HW to stop delivering events + * + * @hdev: hid device + * + * This function indicates that we are not interested in the events + * from this device anymore. Delivery of events may or may not stop, + * depending on the number of users still outstanding. + */ +static inline void hid_hw_close(struct hid_device *hdev) +{ + hdev->ll_driver->close(hdev); +} + +/** + * hid_hw_power - requests underlying HW to go into given power mode + * + * @hdev: hid device + * @level: requested power level (one of %PM_HINT_* defines) + * + * This function requests underlying hardware to enter requested power + * mode. + */ + +static inline int hid_hw_power(struct hid_device *hdev, int level) +{ + return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0; +} + void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size, int interrupt); -- cgit v1.2.3 From 05ac10dd6862a3fcce33d2203fbb2ef285e3ca87 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 2 Dec 2010 08:49:26 +0200 Subject: usb: musb: trivial search and replace patch change all ocurrences of musb_hdrc to musb-hdrc. We will call glue layer drivers musb-, so in order to keep things somewhat standard, let's change the underscore into a dash. Signed-off-by: Felipe Balbi --- include/linux/usb/musb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index ee2dd1d506ed..e2191d4db4dd 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -3,7 +3,7 @@ * Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC. * * Board initialization should put one of these into dev->platform_data, - * probably on some platform_device named "musb_hdrc". It encapsulates + * probably on some platform_device named "musb-hdrc". It encapsulates * key configuration differences between boards. */ -- cgit v1.2.3 From f7ec94370f417fedad4db1054228ef958d48b926 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 2 Dec 2010 09:48:58 +0200 Subject: usb: musb: pass platform_ops via platform_data ... then we don't need to export any symbols from glue layer to musb_core. Signed-off-by: Felipe Balbi --- include/linux/usb/musb.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index e2191d4db4dd..6f4e5014cf5e 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -126,6 +126,9 @@ struct musb_hdrc_platform_data { /* Architecture specific board data */ void *board_data; + + /* Platform specific struct musb_ops pointer */ + const void *platform_ops; }; -- cgit v1.2.3 From 3b7029670d39d22f288ece95254e9ba5ceddd6ba Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 2 Dec 2010 09:51:00 +0200 Subject: usb: musb: mark ->set_clock deprecated ... we will completely drop that need by moving clock handling to platform glue layer. Marking as deprecated will allow us to catch all users easily. Signed-off-by: Felipe Balbi --- include/linux/usb/musb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 6f4e5014cf5e..0b72b5741645 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -119,7 +119,7 @@ struct musb_hdrc_platform_data { int (*set_power)(int state); /* Turn device clock on or off */ - int (*set_clock)(struct clk *clock, int is_on); + int (*set_clock)(struct clk *clock, int is_on) __deprecated; /* MUSB configuration-specific details */ struct musb_hdrc_config *config; -- cgit v1.2.3 From fa56df915d101770a495569473b4c13b1904087b Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 2 Dec 2010 10:55:29 +0200 Subject: usb: musb: drop the set_clock magic now that platform glue layer handles clock completely, that function is completely useless for us. Drop it. Signed-off-by: Felipe Balbi --- include/linux/usb/musb.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 0b72b5741645..0b0e383035e5 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -118,9 +118,6 @@ struct musb_hdrc_platform_data { /* Power the device on or off */ int (*set_power)(int state); - /* Turn device clock on or off */ - int (*set_clock)(struct clk *clock, int is_on) __deprecated; - /* MUSB configuration-specific details */ struct musb_hdrc_config *config; -- cgit v1.2.3 From e70357e35c522776d9f56f6800af4ed7a5bdbaaf Mon Sep 17 00:00:00 2001 From: Hema HK Date: Fri, 10 Dec 2010 18:09:52 +0530 Subject: mfd: TWL6030: OMAP4: Registering the TWL6030-usb device Registering the twl6030-usb transceiver device as a child to twl6030 core. Removed the NOP transceiver init call from board file. Populated twl4030_usb_data platform data structure with the function pointers for OMAP4430 internal PHY operation to be used by twl630-usb driver. Signed-off-by: Hema HK Cc: Samuel Ortiz Cc: Tony Lindgren Signed-off-by: Felipe Balbi --- include/linux/i2c/twl.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index c760991b354a..61b9609e55f2 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -593,6 +593,13 @@ enum twl4030_usb_mode { struct twl4030_usb_data { enum twl4030_usb_mode usb_mode; + + int (*phy_init)(struct device *dev); + int (*phy_exit)(struct device *dev); + /* Power on/off the PHY */ + int (*phy_power)(struct device *dev, int iD, int on); + /* enable/disable phy clocks */ + int (*phy_set_clock)(struct device *dev, int on); }; struct twl4030_ins { -- cgit v1.2.3 From 4291ee305e9bb0699504a66f0e2b7aefcf0512a5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 9 Dec 2010 19:29:03 -0800 Subject: HID: Add and use hid_: dev_ equivalents Neaten current uses of dev_ by adding and using hid specific hid_ macros. Convert existing uses of dev_ uses to hid_. Convert hid-pidff printk uses to hid_. Remove err_hid and use hid_err instead. Add missing newlines to logging messages where necessary. Coalesce format strings. Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt Other miscellaneous changes: Add const struct hid_device * argument to hid-core functions extract() and implement() so hid_ can be used by them. Fix bad indentation in hid-core hid_input_field function that calls extract() function above. Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- include/linux/hid.h | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index e2af195d8b46..20b9801f669b 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -881,12 +881,32 @@ int hid_pidff_init(struct hid_device *hid); #define hid_pidff_init NULL #endif -#define dbg_hid(format, arg...) if (hid_debug) \ - printk(KERN_DEBUG "%s: " format ,\ - __FILE__ , ## arg) -#define err_hid(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ - __FILE__ , ## arg) -#endif /* HID_FF */ +#define dbg_hid(format, arg...) \ +do { \ + if (hid_debug) \ + printk(KERN_DEBUG "%s: " format, __FILE__, ##arg); \ +} while (0) + +#define hid_printk(level, hid, fmt, arg...) \ + dev_printk(level, &(hid)->dev, fmt, ##arg) +#define hid_emerg(hid, fmt, arg...) \ + dev_emerg(&(hid)->dev, fmt, ##arg) +#define hid_crit(hid, fmt, arg...) \ + dev_crit(&(hid)->dev, fmt, ##arg) +#define hid_alert(hid, fmt, arg...) \ + dev_alert(&(hid)->dev, fmt, ##arg) +#define hid_err(hid, fmt, arg...) \ + dev_err(&(hid)->dev, fmt, ##arg) +#define hid_notice(hid, fmt, arg...) \ + dev_notice(&(hid)->dev, fmt, ##arg) +#define hid_warn(hid, fmt, arg...) \ + dev_warn(&(hid)->dev, fmt, ##arg) +#define hid_info(hid, fmt, arg...) \ + dev_info(&(hid)->dev, fmt, ##arg) +#define hid_dbg(hid, fmt, arg...) \ + dev_dbg(&(hid)->dev, fmt, ##arg) + +#endif /* __KERNEL__ */ #endif -- cgit v1.2.3 From 352a337832774a6929c16b569abe9cedc3db01cc Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 9 Dec 2010 22:46:29 +0100 Subject: USB: otg: fix link breakage, when the NOP USB Xceiver is a module If the NOP USB OTG transceiver driver is built as a module, the otg.h header declares external functions, but if they are referenced from the kernel proper, as, e.g., in the OMAP3 case, where the omap3evm board is calling the usb_nop_xceiv_register() function, linkage breaks. This patch fixes this problem. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/otg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 0a5b3711e502..a1a1e7a73ec9 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -116,7 +116,7 @@ struct otg_transceiver { /* for board-specific init logic */ extern int otg_set_transceiver(struct otg_transceiver *); -#if defined(CONFIG_NOP_USB_XCEIV) || defined(CONFIG_NOP_USB_XCEIV_MODULE) +#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ extern void usb_nop_xceiv_register(void); extern void usb_nop_xceiv_unregister(void); -- cgit v1.2.3 From e0c201f339fe7fc38d1b0f6f4755ff627686c7e0 Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Tue, 7 Dec 2010 17:53:55 +0530 Subject: USB: Add MSM OTG Controller driver This driver implements PHY initialization, clock management, ULPI IO ops and simple OTG state machine to kick host/peripheral based on Id/VBUS line status. VBUS/Id lines are tied to a reference voltage on some boards. Hence provide debugfs interface to select host/peripheral mode. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/msm_hsusb.h | 108 +++++++++++++++++++++++++++++++++++++++ include/linux/usb/msm_hsusb_hw.h | 56 ++++++++++++++++++++ 2 files changed, 164 insertions(+) create mode 100644 include/linux/usb/msm_hsusb.h create mode 100644 include/linux/usb/msm_hsusb_hw.h (limited to 'include') diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h new file mode 100644 index 000000000000..b796df94ec72 --- /dev/null +++ b/include/linux/usb/msm_hsusb.h @@ -0,0 +1,108 @@ +/* linux/include/asm-arm/arch-msm/hsusb.h + * + * Copyright (C) 2008 Google, Inc. + * Author: Brian Swetland + * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_HSUSB_H +#define __ASM_ARCH_MSM_HSUSB_H + +#include +#include + +/** + * Supported USB modes + * + * USB_PERIPHERAL Only peripheral mode is supported. + * USB_HOST Only host mode is supported. + * USB_OTG OTG mode is supported. + * + */ +enum usb_mode_type { + USB_NONE = 0, + USB_PERIPHERAL, + USB_HOST, + USB_OTG, +}; + +/** + * OTG control + * + * OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host + * only configuration. + * OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY. + * OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware. + * OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs. + * + */ +enum otg_control_type { + OTG_NO_CONTROL = 0, + OTG_PHY_CONTROL, + OTG_PMIC_CONTROL, + OTG_USER_CONTROL, +}; + +/** + * struct msm_otg_platform_data - platform device data + * for msm72k_otg driver. + * @phy_init_seq: PHY configuration sequence. val, reg pairs + * terminated by -1. + * @vbus_power: VBUS power on/off routine. + * @power_budget: VBUS power budget in mA (0 will be treated as 500mA). + * @mode: Supported mode (OTG/peripheral/host). + * @otg_control: OTG switch controlled by user/Id pin + * @default_mode: Default operational mode. Applicable only if + * OTG switch is controller by user. + * + */ +struct msm_otg_platform_data { + int *phy_init_seq; + void (*vbus_power)(bool on); + unsigned power_budget; + enum usb_mode_type mode; + enum otg_control_type otg_control; + enum usb_mode_type default_mode; + void (*setup_gpio)(enum usb_otg_state state); +}; + +/** + * struct msm_otg: OTG driver data. Shared by HCD and DCD. + * @otg: USB OTG Transceiver structure. + * @pdata: otg device platform data. + * @irq: IRQ number assigned for HSUSB controller. + * @clk: clock struct of usb_hs_clk. + * @pclk: clock struct of usb_hs_pclk. + * @phy_reset_clk: clock struct of usb_phy_clk. + * @core_clk: clock struct of usb_hs_core_clk. + * @regs: ioremapped register base address. + * @inputs: OTG state machine inputs(Id, SessValid etc). + * @sm_work: OTG state machine work. + * + */ +struct msm_otg { + struct otg_transceiver otg; + struct msm_otg_platform_data *pdata; + int irq; + struct clk *clk; + struct clk *pclk; + struct clk *phy_reset_clk; + struct clk *core_clk; + void __iomem *regs; +#define ID 0 +#define B_SESS_VLD 1 + unsigned long inputs; + struct work_struct sm_work; +}; + +#endif diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h new file mode 100644 index 000000000000..b061cffcf048 --- /dev/null +++ b/include/linux/usb/msm_hsusb_hw.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__ +#define __LINUX_USB_GADGET_MSM72K_UDC_H__ + +#ifdef CONFIG_ARCH_MSM7X00A +#define USB_SBUSCFG (MSM_USB_BASE + 0x0090) +#else +#define USB_AHBBURST (MSM_USB_BASE + 0x0090) +#define USB_AHBMODE (MSM_USB_BASE + 0x0098) +#endif +#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ + +#define USB_USBCMD (MSM_USB_BASE + 0x0140) +#define USB_PORTSC (MSM_USB_BASE + 0x0184) +#define USB_OTGSC (MSM_USB_BASE + 0x01A4) +#define USB_USBMODE (MSM_USB_BASE + 0x01A8) + +#define USBCMD_RESET 2 +#define USB_USBINTR (MSM_USB_BASE + 0x0148) + +#define PORTSC_PHCD (1 << 23) /* phy suspend mode */ +#define PORTSC_PTS_MASK (3 << 30) +#define PORTSC_PTS_ULPI (3 << 30) + +#define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170) +#define ULPI_RUN (1 << 30) +#define ULPI_WRITE (1 << 29) +#define ULPI_READ (0 << 29) +#define ULPI_ADDR(n) (((n) & 255) << 16) +#define ULPI_DATA(n) ((n) & 255) +#define ULPI_DATA_READ(n) (((n) >> 8) & 255) + +/* OTG definitions */ +#define OTGSC_INTSTS_MASK (0x7f << 16) +#define OTGSC_ID (1 << 8) +#define OTGSC_BSV (1 << 11) +#define OTGSC_IDIS (1 << 16) +#define OTGSC_BSVIS (1 << 19) +#define OTGSC_IDIE (1 << 24) +#define OTGSC_BSVIE (1 << 27) + +#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */ -- cgit v1.2.3 From 87c0104af742af2acfcbd685f2b9a40f33770dc0 Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Tue, 7 Dec 2010 17:53:58 +0530 Subject: USB: OTG: msm: Add support for power management Implement runtime and system pm ops to put hardware into low power mode (LPM). As part of LPM, USB clocks are turned off, PHY is put into suspend state and PHY comparators are turned off if VBUS/Id notifications are not required from PHY. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/msm_hsusb.h | 4 ++++ include/linux/usb/msm_hsusb_hw.h | 3 +++ 2 files changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index b796df94ec72..3675e03b1539 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -88,6 +88,8 @@ struct msm_otg_platform_data { * @regs: ioremapped register base address. * @inputs: OTG state machine inputs(Id, SessValid etc). * @sm_work: OTG state machine work. + * @in_lpm: indicates low power mode (LPM) state. + * @async_int: Async interrupt arrived. * */ struct msm_otg { @@ -103,6 +105,8 @@ struct msm_otg { #define B_SESS_VLD 1 unsigned long inputs; struct work_struct sm_work; + atomic_t in_lpm; + int async_int; }; #endif diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index b061cffcf048..b92e17349c7b 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -44,6 +44,9 @@ #define ULPI_DATA(n) ((n) & 255) #define ULPI_DATA_READ(n) (((n) >> 8) & 255) +#define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ +#define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ + /* OTG definitions */ #define OTGSC_INTSTS_MASK (0x7f << 16) #define OTGSC_ID (1 << 8) -- cgit v1.2.3 From a3ae0fc34f58e7163b7724feb3d77aa4603f0dc3 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Wed, 1 Dec 2010 23:39:36 +0000 Subject: 8250: add a UPIO_DWAPB32 for 32 bit accesses Some platforms contain a Synopsys DesignWare APB UART that is attached to a 32-bit APB bus where sub-word accesses are not allowed. Add a new IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART. v2: - don't test for 32 bit in the output fast path, provide a separate dwabp32_serial_out() function. Refactor dwabp_serial_out() so that we can reuse the LCR saving code. v3: - rebased on top of "8250: use container_of() instead of casting" Signed-off-by: Jamie Iles Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 9ff9b7db293b..7a6daf189995 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -314,6 +314,7 @@ struct uart_port { #define UPIO_TSI (5) /* Tsi108/109 type IO */ #define UPIO_DWAPB (6) /* DesignWare APB UART */ #define UPIO_RM9000 (7) /* RM9000 type IO */ +#define UPIO_DWAPB32 (8) /* DesignWare APB UART (32 bit accesses) */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ -- cgit v1.2.3 From ba9effa2ecdc08325bd297d541b4207b2df38184 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 13 Dec 2010 19:10:29 +0200 Subject: kbuild: export linux/{a.out,kvm,kvm_para}.h on headers_install_all Export linux/a.out.h, linux/kvm.h and linux/kvm_para.h on headers_install_all if at least one architecture has appropriate files in arch-dependent headers. Signed-off-by: Kirill A. Shutemov Signed-off-by: Michal Marek --- include/linux/Kbuild | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 97319a8fc1e0..ae31f9521a6d 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -20,15 +20,18 @@ header-y += wimax/ objhdr-y += version.h ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ - $(srctree)/include/asm-$(SRCARCH)/a.out.h),) + $(srctree)/include/asm-$(SRCARCH)/a.out.h \ + $(INSTALL_HDR_PATH)/include/asm-*/a.out.h),) header-y += a.out.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ - $(srctree)/include/asm-$(SRCARCH)/kvm.h),) + $(srctree)/include/asm-$(SRCARCH)/kvm.h \ + $(INSTALL_HDR_PATH)/include/asm-*/kvm.h),) header-y += kvm.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ - $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),) + $(srctree)/include/asm-$(SRCARCH)/kvm_para.h \ + $(INSTALL_HDR_PATH)/include/asm-*/kvm_para.h),) header-y += kvm_para.h endif -- cgit v1.2.3 From ed41390fa57a21d06e6e3a3c4bc238bab8957fbb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 14 Dec 2010 16:23:10 +0100 Subject: workqueue: deprecate cancel_rearming_delayed_work[queue]() There's no in-kernel user left for these two obsolete functions. Mark them deprecated and schedule for removal during 2.6.39 cycle. Signed-off-by: Tejun Heo Acked-by: David S. Miller --- include/linux/workqueue.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 0c0771f06bfa..6b5193d70268 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -401,7 +401,7 @@ static inline bool __cancel_delayed_work(struct delayed_work *work) } /* Obsolete. use cancel_delayed_work_sync() */ -static inline +static inline __deprecated void cancel_rearming_delayed_workqueue(struct workqueue_struct *wq, struct delayed_work *work) { @@ -409,7 +409,7 @@ void cancel_rearming_delayed_workqueue(struct workqueue_struct *wq, } /* Obsolete. use cancel_delayed_work_sync() */ -static inline +static inline __deprecated void cancel_rearming_delayed_work(struct delayed_work *work) { cancel_delayed_work_sync(work); -- cgit v1.2.3 From 47c78e891323513e9909729b44033e2c6649e2b7 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 27 Nov 2010 09:16:48 +0100 Subject: input: mt: Break out slots handling In preparation for common code to handle a larger set of MT slots devices, move the slots handling over to a separate file. Signed-off-by: Henrik Rydberg --- include/linux/input.h | 16 ---------------- include/linux/input/mt.h | 44 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 16 deletions(-) create mode 100644 include/linux/input/mt.h (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index 51af441f3a21..99e2a52c0509 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1082,14 +1082,6 @@ struct ff_effect { #include #include -/** - * struct input_mt_slot - represents the state of an input MT slot - * @abs: holds current values of ABS_MT axes for this slot - */ -struct input_mt_slot { - int abs[ABS_MT_LAST - ABS_MT_FIRST + 1]; -}; - /** * struct input_dev - represents an input device * @name: name of the device @@ -1461,11 +1453,6 @@ static inline void input_mt_sync(struct input_dev *dev) input_event(dev, EV_SYN, SYN_MT_REPORT, 0); } -static inline void input_mt_slot(struct input_dev *dev, int slot) -{ - input_event(dev, EV_ABS, ABS_MT_SLOT, slot); -} - void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); /** @@ -1578,8 +1565,5 @@ int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file); int input_ff_create_memless(struct input_dev *dev, void *data, int (*play_effect)(struct input_dev *, void *, struct ff_effect *)); -int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots); -void input_mt_destroy_slots(struct input_dev *dev); - #endif #endif diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h new file mode 100644 index 000000000000..4f5e9d0e2eae --- /dev/null +++ b/include/linux/input/mt.h @@ -0,0 +1,44 @@ +#ifndef _INPUT_MT_H +#define _INPUT_MT_H + +/* + * Input Multitouch Library + * + * Copyright (c) 2010 Henrik Rydberg + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include + +/** + * struct input_mt_slot - represents the state of an input MT slot + * @abs: holds current values of ABS_MT axes for this slot + */ +struct input_mt_slot { + int abs[ABS_MT_LAST - ABS_MT_FIRST + 1]; +}; + +static inline void input_mt_set_value(struct input_mt_slot *slot, + unsigned code, int value) +{ + slot->abs[code - ABS_MT_FIRST] = value; +} + +static inline int input_mt_get_value(const struct input_mt_slot *slot, + unsigned code) +{ + return slot->abs[code - ABS_MT_FIRST]; +} + +int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots); +void input_mt_destroy_slots(struct input_dev *dev); + +static inline void input_mt_slot(struct input_dev *dev, int slot) +{ + input_event(dev, EV_ABS, ABS_MT_SLOT, slot); +} + +#endif -- cgit v1.2.3 From 8cde81001626c4c60b26ef2eb5fc522885ed9fd0 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 27 Nov 2010 10:50:54 +0100 Subject: input: mt: Collect slots initialization code The MT slots devices all follow the same initialization pattern of creating slots and hinting about buffer size. Let drivers call an initialization function instead, and make sure it can be called repeatedly without side effects. Signed-off-by: Henrik Rydberg --- include/linux/input/mt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index 4f5e9d0e2eae..d7f6518e3222 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -33,7 +33,7 @@ static inline int input_mt_get_value(const struct input_mt_slot *slot, return slot->abs[code - ABS_MT_FIRST]; } -int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots); +int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots); void input_mt_destroy_slots(struct input_dev *dev); static inline void input_mt_slot(struct input_dev *dev, int slot) -- cgit v1.2.3 From c5f4dec1ceb6ab773bbbefbe64a7c990c7d6b17f Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 15 Dec 2010 13:50:34 +0100 Subject: input: mt: Move tracking and pointer emulation to input-mt The drivers using the type B protocol all report tracking information the same way. The contact id is semantically equivalent to ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates the driver. The situation can be improved upon by providing a common pointer emulation code, thereby removing the need for the tracking id in the driver. This patch moves all tracking event handling over to the input core, simplifying both the existing drivers and the ones currently in preparation. Acked-by: Ping Cheng Acked-by: Jiri Kosina Signed-off-by: Henrik Rydberg --- include/linux/input.h | 3 +++ include/linux/input/mt.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index 99e2a52c0509..6de145df4c1c 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -848,6 +848,7 @@ struct input_keymap_entry { */ #define MT_TOOL_FINGER 0 #define MT_TOOL_PEN 1 +#define MT_TOOL_MAX 1 /* * Values describing the status of a force-feedback effect @@ -1122,6 +1123,7 @@ struct ff_effect { * of tracked contacts * @mtsize: number of MT slots the device uses * @slot: MT slot currently being transmitted + * @trkid: stores MT tracking ID for the current contact * @absinfo: array of &struct absinfo elements holding information * about absolute axes (current value, min, max, flat, fuzz, * resolution) @@ -1206,6 +1208,7 @@ struct input_dev { struct input_mt_slot *mt; int mtsize; int slot; + int trkid; struct input_absinfo *absinfo; diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index d7f6518e3222..b3ac06a4435d 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -13,6 +13,8 @@ #include +#define TRKID_MAX 0xffff + /** * struct input_mt_slot - represents the state of an input MT slot * @abs: holds current values of ABS_MT axes for this slot @@ -36,9 +38,20 @@ static inline int input_mt_get_value(const struct input_mt_slot *slot, int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots); void input_mt_destroy_slots(struct input_dev *dev); +static inline int input_mt_new_trkid(struct input_dev *dev) +{ + return dev->trkid++ & TRKID_MAX; +} + static inline void input_mt_slot(struct input_dev *dev, int slot) { input_event(dev, EV_ABS, ABS_MT_SLOT, slot); } +void input_mt_report_slot_state(struct input_dev *dev, + unsigned int tool_type, bool active); + +void input_mt_report_finger_count(struct input_dev *dev, int count); +void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count); + #endif -- cgit v1.2.3 From e42a98b520bb22535687ead3120e80edc268279a Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Mon, 6 Dec 2010 10:05:43 +0100 Subject: input: mt: Add hovering distance axis Touch devices capable of hovering, i.e., fingers detected a distance from the surface, are not supported by the current input MT protocol. This patch adds ABS_MT_DISTANCE, which may be used to indicate the distance between the contact and the surface. Signed-off-by: Henrik Rydberg --- include/linux/input.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index 6de145df4c1c..b3a1e02080c0 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -733,11 +733,12 @@ struct input_keymap_entry { #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ #define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ +#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ #ifdef __KERNEL__ /* Implementation details, userspace should not care about these */ #define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR -#define ABS_MT_LAST ABS_MT_PRESSURE +#define ABS_MT_LAST ABS_MT_DISTANCE #endif #define ABS_MAX 0x3f -- cgit v1.2.3 From 6ce5b1ce5f6922db32599e73bcb22f5cdcbf241f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 13 Dec 2010 14:08:53 -0600 Subject: tty: fix typos/errors in tty_driver.h comments Fix various typos and other errors in comments of tty_driver.h. The most significant is the wrong name of a function for the description of TTY_DRIVER_DYNAMIC_DEV. Signed-off-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman --- include/linux/tty_driver.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 09678ed370f8..c3d43eb4150c 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -102,7 +102,7 @@ * unsigned int cmd, unsigned long arg); * * This routine allows the tty driver to implement - * device-specific ioctl's. If the ioctl number passed in cmd + * device-specific ioctls. If the ioctl number passed in cmd * is not recognized by the driver, it should return ENOIOCTLCMD. * * Optional @@ -167,12 +167,12 @@ * * void (*hangup)(struct tty_struct *tty); * - * This routine notifies the tty driver that it should hangup the + * This routine notifies the tty driver that it should hang up the * tty device. * * Optional: * - * int (*break_ctl)(struct tty_stuct *tty, int state); + * int (*break_ctl)(struct tty_struct *tty, int state); * * This optional routine requests the tty driver to turn on or * off BREAK status on the RS-232 port. If state is -1, @@ -358,7 +358,7 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) * overruns, either.) * * TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need - * to be registered with a call to tty_register_driver() when the + * to be registered with a call to tty_register_device() when the * device is found in the system and unregistered with a call to * tty_unregister_device() so the devices will be show up * properly in sysfs. If not set, driver->num entries will be -- cgit v1.2.3 From 3f960dbb9dfe29ff283810624c4340c79fde87f5 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Thu, 16 Dec 2010 18:12:47 +0530 Subject: Serial: Avoid unbalanced IRQ wake disable during resume To avoid unbalanced IRQ wake disable, ensure that wakeups are disabled only when wakeups have been successfully enabled. Tested on OMAP3630SDP/ZOOM3. Signed-off-by: Govindraj.R Reported-by: Paul Walmsley Cc: Santosh Shilimkar Acked-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 7a6daf189995..a23fa29d4eb0 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -365,6 +365,7 @@ struct uart_port { struct device *dev; /* parent device */ unsigned char hub6; /* this should be in the 8250 driver */ unsigned char suspended; + unsigned char irq_wake; unsigned char unused[2]; void *private_data; /* generic platform data pointer */ }; -- cgit v1.2.3 From fbc92a3455577ab17615cbcb91826399061bd789 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 1 Dec 2010 18:51:05 +0100 Subject: tty: add 'active' sysfs attribute to tty0 and console device tty: add 'active' sysfs attribute to tty0 and console device Userspace can query the actual virtual console, and the configured console devices behind /dev/tt0 and /dev/console. The last entry in the list of devices is the active device, analog to the console= kernel command line option. The attribute supports poll(), which is raised when the virtual console is changed or /dev/console is reconfigured. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman index 0000000..b138b66 --- include/linux/console.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/console.h b/include/linux/console.h index 875cfb1c8132..9774fe6a1a97 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -151,7 +151,7 @@ extern int is_console_locked(void); extern int braille_register_console(struct console *, int index, char *console_options, char *braille_options); extern int braille_unregister_console(struct console *); - +extern void console_sysfs_notify(void); extern int console_suspend_enabled; /* Suspend and resume console messages over PM events */ -- cgit v1.2.3 From b7b8de087384cc1954a8cd075af3f9e5977caa2e Mon Sep 17 00:00:00 2001 From: Werner Fink Date: Fri, 3 Dec 2010 12:48:23 +0100 Subject: TTY: Add tty ioctl to figure device node of the system console. This has been in the SuSE kernels for a very long time. Signed-off-by: Werner Fink Signed-off-by: Greg Kroah-Hartman --- include/asm-generic/ioctls.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h index a3216655d657..3f3f2d189fb8 100644 --- a/include/asm-generic/ioctls.h +++ b/include/asm-generic/ioctls.h @@ -67,6 +67,7 @@ #endif #define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ +#define TIOCGDEV _IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */ #define TCGETX 0x5432 /* SYS5 TCGETX compatibility */ #define TCSETX 0x5433 #define TCSETXF 0x5434 -- cgit v1.2.3 From b76834bc1b6db0a0923eed85c81b1113021b0612 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 6 Dec 2010 11:16:25 -0600 Subject: kprobes: Use this_cpu_ops Use this_cpu ops in various places to optimize per cpu data access. Cc: Jason Baron Cc: Namhyung Kim Acked-by: H. Peter Anvin Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo --- include/linux/kprobes.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index e7d1b2e0070d..0c251e9f0507 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -303,12 +303,12 @@ struct hlist_head * kretprobe_inst_table_head(struct task_struct *tsk); /* kprobe_running() will just return the current_kprobe on this CPU */ static inline struct kprobe *kprobe_running(void) { - return (__get_cpu_var(current_kprobe)); + return (__this_cpu_read(current_kprobe)); } static inline void reset_current_kprobe(void) { - __get_cpu_var(current_kprobe) = NULL; + __this_cpu_write(current_kprobe, NULL); } static inline struct kprobe_ctlblk *get_kprobe_ctlblk(void) -- cgit v1.2.3 From 909ea96468096b07fbb41aaf69be060d92bd9271 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 8 Dec 2010 16:22:55 +0100 Subject: core: Replace __get_cpu_var with __this_cpu_read if not used for an address. __get_cpu_var() can be replaced with this_cpu_read and will then use a single read instruction with implied address calculation to access the correct per cpu instance. However, the address of a per cpu variable passed to __this_cpu_read() cannot be determined (since it's an implied address conversion through segment prefixes). Therefore apply this only to uses of __get_cpu_var where the address of the variable is not used. Cc: Pekka Enberg Cc: Hugh Dickins Cc: Thomas Gleixner Acked-by: H. Peter Anvin Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo --- include/asm-generic/irq_regs.h | 8 ++++---- include/linux/elevator.h | 12 +++--------- include/linux/kernel_stat.h | 2 +- 3 files changed, 8 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/asm-generic/irq_regs.h b/include/asm-generic/irq_regs.h index 5ae1d07d4a12..6bf9355fa7eb 100644 --- a/include/asm-generic/irq_regs.h +++ b/include/asm-generic/irq_regs.h @@ -22,15 +22,15 @@ DECLARE_PER_CPU(struct pt_regs *, __irq_regs); static inline struct pt_regs *get_irq_regs(void) { - return __get_cpu_var(__irq_regs); + return __this_cpu_read(__irq_regs); } static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs) { - struct pt_regs *old_regs, **pp_regs = &__get_cpu_var(__irq_regs); + struct pt_regs *old_regs; - old_regs = *pp_regs; - *pp_regs = new_regs; + old_regs = __this_cpu_read(__irq_regs); + __this_cpu_write(__irq_regs, new_regs); return old_regs; } diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 4fd978e7eb83..4d857973d2c9 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -195,15 +195,9 @@ enum { /* * io context count accounting */ -#define elv_ioc_count_mod(name, __val) \ - do { \ - preempt_disable(); \ - __get_cpu_var(name) += (__val); \ - preempt_enable(); \ - } while (0) - -#define elv_ioc_count_inc(name) elv_ioc_count_mod(name, 1) -#define elv_ioc_count_dec(name) elv_ioc_count_mod(name, -1) +#define elv_ioc_count_mod(name, __val) this_cpu_add(name, __val) +#define elv_ioc_count_inc(name) this_cpu_inc(name) +#define elv_ioc_count_dec(name) this_cpu_dec(name) #define elv_ioc_count_read(name) \ ({ \ diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index ad54c846911b..44e83ba12b5b 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -47,7 +47,7 @@ extern unsigned long long nr_context_switches(void); #ifndef CONFIG_GENERIC_HARDIRQS #define kstat_irqs_this_cpu(irq) \ - (kstat_this_cpu.irqs[irq]) + (this_cpu_read(kstat.irqs[irq]) struct irq_desc; -- cgit v1.2.3 From a663ffff1d2e94a7c549a37d08ed9169ce83bdd6 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 6 Dec 2010 11:39:59 -0600 Subject: percpu: Generic support for this_cpu_add, sub, dec, inc_return Introduce generic support for this_cpu_add_return etc. The fallback is to realize these operations with simpler __this_cpu_ops. tj: - Reformatted __cpu_size_call_return2() to make it more consistent with its neighbors. - Dropped unnecessary temp variable ret__ from __this_cpu_generic_add_return(). Reviewed-by: Tejun Heo Reviewed-by: Mathieu Desnoyers Acked-by: H. Peter Anvin Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo --- include/linux/percpu.h | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) (limited to 'include') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 5095b834a6fb..4d593defc47d 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -240,6 +240,21 @@ extern void __bad_size_call_parameter(void); pscr_ret__; \ }) +#define __pcpu_size_call_return2(stem, variable, ...) \ +({ \ + typeof(variable) pscr2_ret__; \ + __verify_pcpu_ptr(&(variable)); \ + switch(sizeof(variable)) { \ + case 1: pscr2_ret__ = stem##1(variable, __VA_ARGS__); break; \ + case 2: pscr2_ret__ = stem##2(variable, __VA_ARGS__); break; \ + case 4: pscr2_ret__ = stem##4(variable, __VA_ARGS__); break; \ + case 8: pscr2_ret__ = stem##8(variable, __VA_ARGS__); break; \ + default: \ + __bad_size_call_parameter(); break; \ + } \ + pscr2_ret__; \ +}) + #define __pcpu_size_call(stem, variable, ...) \ do { \ __verify_pcpu_ptr(&(variable)); \ @@ -529,6 +544,62 @@ do { \ # define __this_cpu_xor(pcp, val) __pcpu_size_call(__this_cpu_xor_, (pcp), (val)) #endif +#define _this_cpu_generic_add_return(pcp, val) \ +({ \ + typeof(pcp) ret__; \ + preempt_disable(); \ + __this_cpu_add(pcp, val); \ + ret__ = __this_cpu_read(pcp); \ + preempt_enable(); \ + ret__; \ +}) + +#ifndef this_cpu_add_return +# ifndef this_cpu_add_return_1 +# define this_cpu_add_return_1(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# ifndef this_cpu_add_return_2 +# define this_cpu_add_return_2(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# ifndef this_cpu_add_return_4 +# define this_cpu_add_return_4(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# ifndef this_cpu_add_return_8 +# define this_cpu_add_return_8(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# define this_cpu_add_return(pcp, val) __pcpu_size_call_return2(this_cpu_add_return_, pcp, val) +#endif + +#define this_cpu_sub_return(pcp, val) this_cpu_add_return(pcp, -(val)) +#define this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1) +#define this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1) + +#define __this_cpu_generic_add_return(pcp, val) \ +({ \ + __this_cpu_add(pcp, val); \ + __this_cpu_read(pcp); \ +}) + +#ifndef __this_cpu_add_return +# ifndef __this_cpu_add_return_1 +# define __this_cpu_add_return_1(pcp, val) __this_cpu_generic_add_return(pcp, val) +# endif +# ifndef __this_cpu_add_return_2 +# define __this_cpu_add_return_2(pcp, val) __this_cpu_generic_add_return(pcp, val) +# endif +# ifndef __this_cpu_add_return_4 +# define __this_cpu_add_return_4(pcp, val) __this_cpu_generic_add_return(pcp, val) +# endif +# ifndef __this_cpu_add_return_8 +# define __this_cpu_add_return_8(pcp, val) __this_cpu_generic_add_return(pcp, val) +# endif +# define __this_cpu_add_return(pcp, val) __pcpu_size_call_return2(this_cpu_add_return_, pcp, val) +#endif + +#define __this_cpu_sub_return(pcp, val) this_cpu_add_return(pcp, -(val)) +#define __this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1) +#define __this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1) + /* * IRQ safe versions of the per cpu RMW operations. Note that these operations * are *not* safe against modification of the same variable from another -- cgit v1.2.3 From cfb824349556904b319464139be5c75fce983b0d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 6 Dec 2010 11:40:03 -0600 Subject: highmem: Use this_cpu_xx_return() operations Use this_cpu operations to optimize access primitives for highmem. The main effect is the avoidance of address calculations through the use of a segment prefix. V3->V4 - kmap_atomic_idx: Do not return a value. - Use __this_cpu_dec without HIGHMEM_DEBUG Cc: Peter Zijlstra Cc: Catalin Marinas Acked-by: H. Peter Anvin Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo --- include/linux/highmem.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/highmem.h b/include/linux/highmem.h index b676c585574e..3a93f73a8acc 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -81,7 +81,8 @@ DECLARE_PER_CPU(int, __kmap_atomic_idx); static inline int kmap_atomic_idx_push(void) { - int idx = __get_cpu_var(__kmap_atomic_idx)++; + int idx = __this_cpu_inc_return(__kmap_atomic_idx) - 1; + #ifdef CONFIG_DEBUG_HIGHMEM WARN_ON_ONCE(in_irq() && !irqs_disabled()); BUG_ON(idx > KM_TYPE_NR); @@ -91,16 +92,18 @@ static inline int kmap_atomic_idx_push(void) static inline int kmap_atomic_idx(void) { - return __get_cpu_var(__kmap_atomic_idx) - 1; + return __this_cpu_read(__kmap_atomic_idx) - 1; } -static inline int kmap_atomic_idx_pop(void) +static inline void kmap_atomic_idx_pop(void) { - int idx = --__get_cpu_var(__kmap_atomic_idx); #ifdef CONFIG_DEBUG_HIGHMEM + int idx = __this_cpu_dec_return(__kmap_atomic_idx); + BUG_ON(idx < 0); +#else + __this_cpu_dec(__kmap_atomic_idx); #endif - return idx; } #endif -- cgit v1.2.3 From 403047754cf690b012369b8fb563b738b88086e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 17 Dec 2010 15:47:04 +0100 Subject: percpu,x86: relocate this_cpu_add_return() and friends - include/linux/percpu.h: this_cpu_add_return() and friends were located next to __this_cpu_add_return(). However, the overall organization is to first group by preemption safeness. Relocate this_cpu_add_return() and friends to preemption-safe area. - arch/x86/include/asm/percpu.h: Relocate percpu_add_return_op() after other more basic operations. Relocate [__]this_cpu_add_return_8() so that they're first grouped by preemption safeness. Signed-off-by: Tejun Heo Cc: Christoph Lameter --- include/linux/percpu.h | 60 +++++++++++++++++++++++++------------------------- 1 file changed, 30 insertions(+), 30 deletions(-) (limited to 'include') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 4d593defc47d..3484e88d93f8 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -417,6 +417,36 @@ do { \ # define this_cpu_xor(pcp, val) __pcpu_size_call(this_cpu_or_, (pcp), (val)) #endif +#define _this_cpu_generic_add_return(pcp, val) \ +({ \ + typeof(pcp) ret__; \ + preempt_disable(); \ + __this_cpu_add(pcp, val); \ + ret__ = __this_cpu_read(pcp); \ + preempt_enable(); \ + ret__; \ +}) + +#ifndef this_cpu_add_return +# ifndef this_cpu_add_return_1 +# define this_cpu_add_return_1(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# ifndef this_cpu_add_return_2 +# define this_cpu_add_return_2(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# ifndef this_cpu_add_return_4 +# define this_cpu_add_return_4(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# ifndef this_cpu_add_return_8 +# define this_cpu_add_return_8(pcp, val) _this_cpu_generic_add_return(pcp, val) +# endif +# define this_cpu_add_return(pcp, val) __pcpu_size_call_return2(this_cpu_add_return_, pcp, val) +#endif + +#define this_cpu_sub_return(pcp, val) this_cpu_add_return(pcp, -(val)) +#define this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1) +#define this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1) + /* * Generic percpu operations that do not require preemption handling. * Either we do not care about races or the caller has the @@ -544,36 +574,6 @@ do { \ # define __this_cpu_xor(pcp, val) __pcpu_size_call(__this_cpu_xor_, (pcp), (val)) #endif -#define _this_cpu_generic_add_return(pcp, val) \ -({ \ - typeof(pcp) ret__; \ - preempt_disable(); \ - __this_cpu_add(pcp, val); \ - ret__ = __this_cpu_read(pcp); \ - preempt_enable(); \ - ret__; \ -}) - -#ifndef this_cpu_add_return -# ifndef this_cpu_add_return_1 -# define this_cpu_add_return_1(pcp, val) _this_cpu_generic_add_return(pcp, val) -# endif -# ifndef this_cpu_add_return_2 -# define this_cpu_add_return_2(pcp, val) _this_cpu_generic_add_return(pcp, val) -# endif -# ifndef this_cpu_add_return_4 -# define this_cpu_add_return_4(pcp, val) _this_cpu_generic_add_return(pcp, val) -# endif -# ifndef this_cpu_add_return_8 -# define this_cpu_add_return_8(pcp, val) _this_cpu_generic_add_return(pcp, val) -# endif -# define this_cpu_add_return(pcp, val) __pcpu_size_call_return2(this_cpu_add_return_, pcp, val) -#endif - -#define this_cpu_sub_return(pcp, val) this_cpu_add_return(pcp, -(val)) -#define this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1) -#define this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1) - #define __this_cpu_generic_add_return(pcp, val) \ ({ \ __this_cpu_add(pcp, val); \ -- cgit v1.2.3 From 2b7124428561c7c3cfa4a58cc4c6feea53f3148e Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 18 Dec 2010 15:54:04 +0100 Subject: percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support Generic code to provide new per cpu atomic features this_cpu_cmpxchg this_cpu_xchg Fallback occurs to functions using interrupts disable/enable to ensure correct per cpu atomicity. Fallback to regular cmpxchg and xchg is not possible since per cpu atomic semantics include the guarantee that the current cpus per cpu data is accessed atomically. Use of regular cmpxchg and xchg requires the determination of the address of the per cpu data before regular cmpxchg or xchg which therefore cannot be atomically included in an xchg or cmpxchg without segment override. tj: - Relocated new ops to conform better to the general organization. - This patch contains a trivial comment fix. Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo --- include/linux/percpu.h | 134 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 133 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 3484e88d93f8..27c3c6fcfad3 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -447,6 +447,59 @@ do { \ #define this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1) #define this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1) +#define _this_cpu_generic_xchg(pcp, nval) \ +({ typeof(pcp) ret__; \ + preempt_disable(); \ + ret__ = __this_cpu_read(pcp); \ + __this_cpu_write(pcp, nval); \ + preempt_enable(); \ + ret__; \ +}) + +#ifndef this_cpu_xchg +# ifndef this_cpu_xchg_1 +# define this_cpu_xchg_1(pcp, nval) _this_cpu_generic_xchg(pcp, nval) +# endif +# ifndef this_cpu_xchg_2 +# define this_cpu_xchg_2(pcp, nval) _this_cpu_generic_xchg(pcp, nval) +# endif +# ifndef this_cpu_xchg_4 +# define this_cpu_xchg_4(pcp, nval) _this_cpu_generic_xchg(pcp, nval) +# endif +# ifndef this_cpu_xchg_8 +# define this_cpu_xchg_8(pcp, nval) _this_cpu_generic_xchg(pcp, nval) +# endif +# define this_cpu_xchg(pcp, nval) \ + __pcpu_size_call_return2(this_cpu_xchg_, (pcp), nval) +#endif + +#define _this_cpu_generic_cmpxchg(pcp, oval, nval) \ +({ typeof(pcp) ret__; \ + preempt_disable(); \ + ret__ = __this_cpu_read(pcp); \ + if (ret__ == (oval)) \ + __this_cpu_write(pcp, nval); \ + preempt_enable(); \ + ret__; \ +}) + +#ifndef this_cpu_cmpxchg +# ifndef this_cpu_cmpxchg_1 +# define this_cpu_cmpxchg_1(pcp, oval, nval) _this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef this_cpu_cmpxchg_2 +# define this_cpu_cmpxchg_2(pcp, oval, nval) _this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef this_cpu_cmpxchg_4 +# define this_cpu_cmpxchg_4(pcp, oval, nval) _this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef this_cpu_cmpxchg_8 +# define this_cpu_cmpxchg_8(pcp, oval, nval) _this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# define this_cpu_cmpxchg(pcp, oval, nval) \ + __pcpu_size_call_return2(this_cpu_cmpxchg_, pcp, oval, nval) +#endif + /* * Generic percpu operations that do not require preemption handling. * Either we do not care about races or the caller has the @@ -600,11 +653,61 @@ do { \ #define __this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1) #define __this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1) +#define __this_cpu_generic_xchg(pcp, nval) \ +({ typeof(pcp) ret__; \ + ret__ = __this_cpu_read(pcp); \ + __this_cpu_write(pcp, nval); \ + ret__; \ +}) + +#ifndef __this_cpu_xchg +# ifndef __this_cpu_xchg_1 +# define __this_cpu_xchg_1(pcp, nval) __this_cpu_generic_xchg(pcp, nval) +# endif +# ifndef __this_cpu_xchg_2 +# define __this_cpu_xchg_2(pcp, nval) __this_cpu_generic_xchg(pcp, nval) +# endif +# ifndef __this_cpu_xchg_4 +# define __this_cpu_xchg_4(pcp, nval) __this_cpu_generic_xchg(pcp, nval) +# endif +# ifndef __this_cpu_xchg_8 +# define __this_cpu_xchg_8(pcp, nval) __this_cpu_generic_xchg(pcp, nval) +# endif +# define __this_cpu_xchg(pcp, nval) \ + __pcpu_size_call_return2(__this_cpu_xchg_, (pcp), nval) +#endif + +#define __this_cpu_generic_cmpxchg(pcp, oval, nval) \ +({ \ + typeof(pcp) ret__; \ + ret__ = __this_cpu_read(pcp); \ + if (ret__ == (oval)) \ + __this_cpu_write(pcp, nval); \ + ret__; \ +}) + +#ifndef __this_cpu_cmpxchg +# ifndef __this_cpu_cmpxchg_1 +# define __this_cpu_cmpxchg_1(pcp, oval, nval) __this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef __this_cpu_cmpxchg_2 +# define __this_cpu_cmpxchg_2(pcp, oval, nval) __this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef __this_cpu_cmpxchg_4 +# define __this_cpu_cmpxchg_4(pcp, oval, nval) __this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef __this_cpu_cmpxchg_8 +# define __this_cpu_cmpxchg_8(pcp, oval, nval) __this_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# define __this_cpu_cmpxchg(pcp, oval, nval) \ + __pcpu_size_call_return2(__this_cpu_cmpxchg_, pcp, oval, nval) +#endif + /* * IRQ safe versions of the per cpu RMW operations. Note that these operations * are *not* safe against modification of the same variable from another * processors (which one gets when using regular atomic operations) - . They are guaranteed to be atomic vs. local interrupts and + * They are guaranteed to be atomic vs. local interrupts and * preemption only. */ #define irqsafe_cpu_generic_to_op(pcp, val, op) \ @@ -691,4 +794,33 @@ do { \ # define irqsafe_cpu_xor(pcp, val) __pcpu_size_call(irqsafe_cpu_xor_, (val)) #endif +#define irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) \ +({ \ + typeof(pcp) ret__; \ + unsigned long flags; \ + local_irq_save(flags); \ + ret__ = __this_cpu_read(pcp); \ + if (ret__ == (oval)) \ + __this_cpu_write(pcp, nval); \ + local_irq_restore(flags); \ + ret__; \ +}) + +#ifndef irqsafe_cpu_cmpxchg +# ifndef irqsafe_cpu_cmpxchg_1 +# define irqsafe_cpu_cmpxchg_1(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef irqsafe_cpu_cmpxchg_2 +# define irqsafe_cpu_cmpxchg_2(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef irqsafe_cpu_cmpxchg_4 +# define irqsafe_cpu_cmpxchg_4(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# ifndef irqsafe_cpu_cmpxchg_8 +# define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) +# endif +# define irqsafe_cpu_cmpxchg(pcp, oval, nval) \ + __pcpu_size_call_return2(irqsafe_cpu_cmpxchg_, (pcp), oval, nval) +#endif + #endif /* __LINUX_PERCPU_H */ -- cgit v1.2.3 From 85b7720039fc000b561c20fe2aaa3b54cddae4a7 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 18 Dec 2010 20:51:13 +0100 Subject: Input: introduce device properties Today, userspace sets up an input device based on the data it emits. This is not always enough; a tablet and a touchscreen may emit exactly the same data, for instance, but the former should be set up with a pointer whereas the latter does not need to. Recently, a new type of touchpad has emerged where the buttons are under the pad, which changes logic without changing the emitted data. This patch introduces a new ioctl, EVIOCGPROP, which enables user access to a set of device properties useful during setup. The properties are given as a bitmap in the same fashion as the event types, and are also made available via sysfs, uevent and /proc/bus/input/devices. Acked-by: Ping Cheng Acked-by: Chase Douglas Acked-by: Dmitry Torokhov Signed-off-by: Henrik Rydberg --- include/linux/input.h | 16 ++++++++++++++++ include/linux/uinput.h | 1 + 2 files changed, 17 insertions(+) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index b3a1e02080c0..8d9c76cd3c43 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -91,6 +91,7 @@ struct input_keymap_entry { #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ +#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ @@ -107,6 +108,18 @@ struct input_keymap_entry { #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ +/* + * Device properties and quirks + */ + +#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ +#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ +#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ +#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ + +#define INPUT_PROP_MAX 0x1f +#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) + /* * Event types */ @@ -1090,6 +1103,7 @@ struct ff_effect { * @phys: physical path to the device in the system hierarchy * @uniq: unique identification code for the device (if device has it) * @id: id of the device (struct input_id) + * @propbit: bitmap of device properties and quirks * @evbit: bitmap of types of events supported by the device (EV_KEY, * EV_REL, etc.) * @keybit: bitmap of keys/buttons this device has @@ -1173,6 +1187,8 @@ struct input_dev { const char *uniq; struct input_id id; + unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)]; + unsigned long evbit[BITS_TO_LONGS(EV_CNT)]; unsigned long keybit[BITS_TO_LONGS(KEY_CNT)]; unsigned long relbit[BITS_TO_LONGS(REL_CNT)]; diff --git a/include/linux/uinput.h b/include/linux/uinput.h index 05f7fed2b173..d28c726ede4f 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -104,6 +104,7 @@ struct uinput_ff_erase { #define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int) #define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*) #define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int) +#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int) #define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload) #define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload) -- cgit v1.2.3 From 00f0254ed9b19164d416dc2e3c2e81eda55a6faf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 1 Oct 2010 13:55:52 -0700 Subject: [SCSI] libsas: fix definition of wideport, include local sas address To date libsas has only looked at the attached sas address when determining the formation of wide ports. The specification and some hardware expects that phys with different addresses will not form a wide port unless the local peer phys also match each other. Introduce a flag to select stricter behavior at sas_register_ha() time. The flag can be dropped once it is known that all libsas users expect the same behavior. Current drivers just initialize this field to zero and get the traditional behavior. Reported-by: Patrick Thomson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- include/scsi/libsas.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 90ce527ecf3d..8f6bb9c7f3eb 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -361,6 +361,8 @@ struct sas_ha_struct { /* The class calls this to send a task for execution. */ int lldd_max_execute_num; int lldd_queue_size; + int strict_wide_ports; /* both sas_addr and attached_sas_addr must match + * their siblings when forming wide ports */ /* LLDD calls these to notify the class of an event. */ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event); -- cgit v1.2.3 From 8eea2f55a65b9471276e78e5c86ddd19c4c0365c Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Tue, 23 Nov 2010 15:29:21 -0800 Subject: [SCSI] bnx2i: Added fix for NOP-Out response panic from unsolicited NOP-In The patch fixes the following situations where NOP-Out pkt is called for: - local unsolicited NOP-Out requests (requesting no NOP-In response) - local NOP-Out responses to unsolicited NOP-In requests kernel panic is observed due to double session spin_lock requests; one in the bnx2i_process_nopin_local_cmpl routine in bnx2i_hwi.c and the other in the iscsi_put_task routine in libiscsi.c The proposed fix is to export the currently static __iscsi_put_task() routine and have bnx2i call it directly instead of the iscsi_put_task() routine which holds the session spin lock. Signed-off-by: Eddie Wai Reviewed-by: Michael Chan Reviewed-by: Anil Veerabhadrappa Acked-by: Benjamin Li Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/libiscsi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index b81d969ddc67..68e951d79f0b 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -419,6 +419,7 @@ extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t); extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t); extern void iscsi_requeue_task(struct iscsi_task *task); extern void iscsi_put_task(struct iscsi_task *task); +extern void __iscsi_put_task(struct iscsi_task *task); extern void __iscsi_get_task(struct iscsi_task *task); extern void iscsi_complete_scsi_task(struct iscsi_task *task, uint32_t exp_cmdsn, uint32_t max_cmdsn); -- cgit v1.2.3 From 05fee645e96e732a79ad083cab8ddd4efd108e2c Mon Sep 17 00:00:00 2001 From: john fastabend Date: Tue, 30 Nov 2010 16:18:49 -0800 Subject: [SCSI] libfc: remove tgt_flags from fc_fcp_pkt struct We can easily remove the tgt_flags from fc_fcp_pkt struct and use rpriv->tgt_flags directly where needed. Signed-off-by: John Fastabend Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/libfc.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 5c4c1678f7be..3eb3915eb557 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -263,7 +263,6 @@ struct fc_seq_els_data { * struct fc_fcp_pkt - FCP request structure (one for each scsi_cmnd request) * @lp: The associated local port * @state: The state of the I/O - * @tgt_flags: Target's flags * @ref_cnt: Reference count * @scsi_pkt_lock: Lock to protect the SCSI packet (must be taken before the * host_lock if both are to be held at the same time) @@ -298,7 +297,6 @@ struct fc_fcp_pkt { /* Housekeeping information */ struct fc_lport *lp; u16 state; - u16 tgt_flags; atomic_t ref_cnt; spinlock_t scsi_pkt_lock; -- cgit v1.2.3 From 794d98e77f5901ceded697f1633463e88f078038 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Tue, 30 Nov 2010 16:19:56 -0800 Subject: [SCSI] libfcoe: retry rejected FLOGI to another FCF if possible Switches using multiple-FCFs may reject FLOGI in order to balance the load between multiple FCFs. Even though the FCF was available, it may have more load at the point we actually send the FLOGI. If the FLOGI fails, select a different FCF if possible, among those with the same priority. If no other FCF is available, just deliver the reject to libfc for retry. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/libfcoe.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 06f1b5a8ed19..feb6a94c90ea 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -92,10 +92,12 @@ enum fip_state { * @timer_work: &work_struct for doing keep-alives and resets. * @recv_work: &work_struct for receiving FIP frames. * @fip_recv_list: list of received FIP frames. + * @flogi_req: clone of FLOGI request sent * @rnd_state: state for pseudo-random number generator. * @port_id: proposed or selected local-port ID. * @user_mfs: configured maximum FC frame size, including FC header. * @flogi_oxid: exchange ID of most recent fabric login. + * @flogi_req_send: send of FLOGI requested * @flogi_count: number of FLOGI attempts in AUTO mode. * @map_dest: use the FC_MAP mode for destination MAC addresses. * @spma: supports SPMA server-provided MACs mode @@ -106,6 +108,7 @@ enum fip_state { * @update_mac: LLD-supplied function to handle changes to MAC addresses. * @get_src_addr: LLD-supplied function to supply a source MAC address. * @ctlr_mutex: lock protecting this structure. + * @ctlr_lock: spinlock covering flogi_req * * This structure is used by all FCoE drivers. It contains information * needed by all FCoE low-level drivers (LLDs) as well as internal state @@ -126,12 +129,14 @@ struct fcoe_ctlr { struct work_struct timer_work; struct work_struct recv_work; struct sk_buff_head fip_recv_list; + struct sk_buff *flogi_req; struct rnd_state rnd_state; u32 port_id; u16 user_mfs; u16 flogi_oxid; + u8 flogi_req_send; u8 flogi_count; u8 map_dest; u8 spma; @@ -143,6 +148,7 @@ struct fcoe_ctlr { void (*update_mac)(struct fc_lport *, u8 *addr); u8 * (*get_src_addr)(struct fc_lport *); struct mutex ctlr_mutex; + spinlock_t ctlr_lock; }; /** @@ -155,6 +161,7 @@ struct fcoe_ctlr { * @fcf_mac: Ethernet address of the FCF * @vfid: virtual fabric ID * @pri: selection priority, smaller values are better + * @flogi_sent: current FLOGI sent to this FCF * @flags: flags received from advertisement * @fka_period: keep-alive period, in jiffies * @@ -176,6 +183,7 @@ struct fcoe_fcf { u8 fcf_mac[ETH_ALEN]; u8 pri; + u8 flogi_sent; u16 flags; u32 fka_period; u8 fd_flags:1; -- cgit v1.2.3 From 5f0e385fdafb7d6c8ded6464fa6421c735d96caf Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Tue, 30 Nov 2010 16:20:18 -0800 Subject: [SCSI] libfc: fix statistics for FCP input/output megabytes The statistics for InputMegabytes and OutputMegabytes are misnamed. They're accumulating bytes, not megabytes. The statistic returned via /sys must be in megabytes, however, which is what the HBA-API wants. The FCP code needs to accumulate it in bytes and then divide by 1,000,000 (not 2^20) before it presented via sysfs. This affects fcoe.ko only, not fnic. The fnic driver correctly by accumulating bytes and then converts to megabytes. I checked that libhbalinux is using the /sys file directly without conversion. BTW, qla2xxx does divide by 2^20, which I'm not fixing here. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/libfc.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 3eb3915eb557..f53c8e31d5fb 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -221,8 +221,8 @@ struct fc_rport_priv { * @InputRequests: Number of input requests * @OutputRequests: Number of output requests * @ControlRequests: Number of control requests - * @InputMegabytes: Number of received megabytes - * @OutputMegabytes: Number of transmitted megabytes + * @InputBytes: Number of received bytes + * @OutputBytes: Number of transmitted bytes * @VLinkFailureCount: Number of virtual link failures * @MissDiscAdvCount: Number of missing FIP discovery advertisement */ @@ -241,8 +241,8 @@ struct fcoe_dev_stats { u64 InputRequests; u64 OutputRequests; u64 ControlRequests; - u64 InputMegabytes; - u64 OutputMegabytes; + u64 InputBytes; + u64 OutputBytes; u64 VLinkFailureCount; u64 MissDiscAdvCount; }; -- cgit v1.2.3 From e9ccc998b70fbe59626f393bb0328402159c6b5c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 17 Dec 2010 13:11:16 -0800 Subject: [SCSI] Add missing SPC-4 CDB and MAINTENANCE_[IN,OUT] service action definitions This patch adds a handful of missing CDBs defs that are used by TCM persistent reservation logic in the SPC-4 defined CDB exclusion table for registrations and reservations. This includes a number of missing MI_* and MO_* prefixed service actions defs for MAINTENANCE_IN and MAINTENANCE_OUT that are mentioned wrt to persistent registration and reservation status for the SCSI Initiator Port. Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley --- include/scsi/scsi.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include') diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 216af8538cc9..1651fef18831 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -115,33 +115,61 @@ struct scsi_cmnd; #define PERSISTENT_RESERVE_OUT 0x5f #define VARIABLE_LENGTH_CMD 0x7f #define REPORT_LUNS 0xa0 +#define SECURITY_PROTOCOL_IN 0xa2 #define MAINTENANCE_IN 0xa3 #define MAINTENANCE_OUT 0xa4 #define MOVE_MEDIUM 0xa5 #define EXCHANGE_MEDIUM 0xa6 #define READ_12 0xa8 #define WRITE_12 0xaa +#define READ_MEDIA_SERIAL_NUMBER 0xab #define WRITE_VERIFY_12 0xae #define VERIFY_12 0xaf #define SEARCH_HIGH_12 0xb0 #define SEARCH_EQUAL_12 0xb1 #define SEARCH_LOW_12 0xb2 +#define SECURITY_PROTOCOL_OUT 0xb5 #define READ_ELEMENT_STATUS 0xb8 #define SEND_VOLUME_TAG 0xb6 #define WRITE_LONG_2 0xea +#define EXTENDED_COPY 0x83 +#define RECEIVE_COPY_RESULTS 0x84 +#define ACCESS_CONTROL_IN 0x86 +#define ACCESS_CONTROL_OUT 0x87 #define READ_16 0x88 #define WRITE_16 0x8a +#define READ_ATTRIBUTE 0x8c +#define WRITE_ATTRIBUTE 0x8d #define VERIFY_16 0x8f #define WRITE_SAME_16 0x93 #define SERVICE_ACTION_IN 0x9e /* values for service action in */ #define SAI_READ_CAPACITY_16 0x10 #define SAI_GET_LBA_STATUS 0x12 +/* values for VARIABLE_LENGTH_CMD service action codes + * see spc4r17 Section D.3.5, table D.7 and D.8 */ +#define VLC_SA_RECEIVE_CREDENTIAL 0x1800 /* values for maintenance in */ +#define MI_REPORT_IDENTIFYING_INFORMATION 0x05 #define MI_REPORT_TARGET_PGS 0x0a +#define MI_REPORT_ALIASES 0x0b +#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c +#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d +#define MI_REPORT_PRIORITY 0x0e +#define MI_REPORT_TIMESTAMP 0x0f +#define MI_MANAGEMENT_PROTOCOL_IN 0x10 /* values for maintenance out */ +#define MO_SET_IDENTIFYING_INFORMATION 0x06 #define MO_SET_TARGET_PGS 0x0a +#define MO_CHANGE_ALIASES 0x0b +#define MO_SET_PRIORITY 0x0e +#define MO_SET_TIMESTAMP 0x0f +#define MO_MANAGEMENT_PROTOCOL_OUT 0x10 /* values for variable length command */ +#define XDREAD_32 0x03 +#define XDWRITE_32 0x04 +#define XPWRITE_32 0x06 +#define XDWRITEREAD_32 0x07 #define READ_32 0x09 #define VERIFY_32 0x0a #define WRITE_32 0x0b -- cgit v1.2.3 From da1f026b532ce944d74461497dc6d8c16456466e Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 20 Dec 2010 21:09:22 +0000 Subject: Keyboard: omap-keypad: use matrix_keypad.h Most keypad drivers make use of the defined macros, structures and inline functions. Convert omap-keypad driver to use those as well, as suggested by a compile time warning, hardcoded into the OMAP . Created against linux-2.6.37-rc5. Tested on Amstrad Delta. Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to board-h4. Signed-off-by: Janusz Krzysztofik Reviewed-by: Aaro Koskinen Acked-by: Dmitry Torokhov Signed-off-by: Tony Lindgren --- include/linux/input/matrix_keypad.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 80352ad6581a..697474691749 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -9,7 +9,7 @@ #define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\ (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\ - (val & 0xffff)) + ((val) & 0xffff)) #define KEY_ROW(k) (((k) >> 24) & 0xff) #define KEY_COL(k) (((k) >> 16) & 0xff) -- cgit v1.2.3 From aab94339cd85d726abeae78fc02351fc1910e6a4 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Wed, 22 Dec 2010 11:57:26 -0800 Subject: of: Add support for linking device tree blobs into vmlinux This patch adds support for linking device tree blob(s) into vmlinux. Modifies asm-generic/vmlinux.lds.h to add linking .dtb sections into vmlinux. To maintain compatiblity with the of/fdt driver code platforms MUST copy the blob to a non-init memory location before the kernel frees the .init.* sections in the image. Modifies scripts/Makefile.lib to add a kbuild command to compile DTS files to device tree blobs and a rule to create objects to wrap the blobs for linking. STRUCT_ALIGNMENT is defined in vmlinux.lds.h for use in the rule to create wrapper objects for the dtb in Makefile.lib. The STRUCT_ALIGN() macro in vmlinux.lds.h is modified to use the STRUCT_ALIGNMENT definition. The DTB's are placed on 32 byte boundries to allow parsing the blob with driver/of/fdt.c during early boot without having to copy the blob to get the structure alignment GCC expects. A DTB is linked in by adding the DTB object to the list of objects to be linked into vmlinux in the archtecture specific Makefile using obj-y += foo.dtb.o Signed-off-by: Dirk Brandewie Acked-by: Michal Marek [grant.likely@secretlab.ca: cleaned up whitespace inconsistencies] Signed-off-by: Grant Likely --- include/asm-generic/vmlinux.lds.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index bd69d79208de..05cbad03c5ab 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -67,7 +67,8 @@ * Align to a 32 byte boundary equal to the * alignment gcc 4.5 uses for a struct */ -#define STRUCT_ALIGN() . = ALIGN(32) +#define STRUCT_ALIGNMENT 32 +#define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT) /* The actual configuration determine if the init/exit sections * are handled as text/data or they can be discarded (which @@ -146,6 +147,13 @@ #define TRACE_SYSCALLS() #endif + +#define KERNEL_DTB() \ + STRUCT_ALIGN(); \ + VMLINUX_SYMBOL(__dtb_start) = .; \ + *(.dtb.init.rodata) \ + VMLINUX_SYMBOL(__dtb_end) = .; + /* .data section */ #define DATA_DATA \ *(.data) \ @@ -468,7 +476,8 @@ MCOUNT_REC() \ DEV_DISCARD(init.rodata) \ CPU_DISCARD(init.rodata) \ - MEM_DISCARD(init.rodata) + MEM_DISCARD(init.rodata) \ + KERNEL_DTB() #define INIT_TEXT \ *(.init.text) \ -- cgit v1.2.3 From 0131d8973c8b9bd9d40fee8fae24eab24821efdb Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 1 Dec 2010 10:54:46 +0100 Subject: of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior Acked-by: Benjamin Herrenschmidt Signed-off-by: Grant Likely --- include/linux/of_address.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/of_address.h b/include/linux/of_address.h index 8aea06f0564c..2feda6ee6140 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -3,7 +3,7 @@ #include #include -extern u64 of_translate_address(struct device_node *np, const u32 *addr); +extern u64 of_translate_address(struct device_node *np, const __be32 *addr); extern int of_address_to_resource(struct device_node *dev, int index, struct resource *r); extern void __iomem *of_iomap(struct device_node *device, int index); @@ -21,7 +21,7 @@ static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; } #endif #ifdef CONFIG_PCI -extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, +extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, unsigned int *flags); extern int of_pci_address_to_resource(struct device_node *dev, int bar, struct resource *r); @@ -32,7 +32,7 @@ static inline int of_pci_address_to_resource(struct device_node *dev, int bar, return -ENOSYS; } -static inline const u32 *of_get_pci_address(struct device_node *dev, +static inline const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, unsigned int *flags) { return NULL; -- cgit v1.2.3 From 7063c0d942a1af2993531fbe52b4c74c1db818c4 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 24 Dec 2010 13:59:11 +0800 Subject: spi/dw_spi: add DMA support dw_spi driver in upstream only supports PIO mode, and this patch will support it to cowork with the Designware dma controller used on Intel Moorestown platform, at the same time it provides a general framework to support dw_spi core to cowork with dma controllers on other platforms It has been tested with a Option GTM501L 3G modem and Infenion 60x60 modem. To use DMA mode, DMA controller 2 of Moorestown has to be enabled Also change the dma interface suggested by Linus Walleij. Acked-by: Linus Walleij Signed-off-by: Feng Tang [Typo fix and renames to match intel_mid_dma renaming] Signed-off-by: Vinod Koul Signed-off-by: Alan Cox Signed-off-by: Grant Likely --- include/linux/spi/dw_spi.h | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h index c91302f3a257..6cd10f6ad472 100644 --- a/include/linux/spi/dw_spi.h +++ b/include/linux/spi/dw_spi.h @@ -1,5 +1,6 @@ #ifndef DW_SPI_HEADER_H #define DW_SPI_HEADER_H + #include /* Bit fields in CTRLR0 */ @@ -82,6 +83,13 @@ struct dw_spi_reg { though only low 16 bits matters */ } __packed; +struct dw_spi; +struct dw_spi_dma_ops { + int (*dma_init)(struct dw_spi *dws); + void (*dma_exit)(struct dw_spi *dws); + int (*dma_transfer)(struct dw_spi *dws, int cs_change); +}; + struct dw_spi { struct spi_master *master; struct spi_device *cur_dev; @@ -136,13 +144,15 @@ struct dw_spi { /* Dma info */ int dma_inited; struct dma_chan *txchan; + struct scatterlist tx_sgl; struct dma_chan *rxchan; - int txdma_done; - int rxdma_done; - u64 tx_param; - u64 rx_param; + struct scatterlist rx_sgl; + int dma_chan_done; struct device *dma_dev; - dma_addr_t dma_addr; + dma_addr_t dma_addr; /* phy address of the Data register */ + struct dw_spi_dma_ops *dma_ops; + void *dma_priv; /* platform relate info */ + struct pci_dev *dmac; /* Bus interface info */ void *priv; @@ -216,4 +226,8 @@ extern int dw_spi_add_host(struct dw_spi *dws); extern void dw_spi_remove_host(struct dw_spi *dws); extern int dw_spi_suspend_host(struct dw_spi *dws); extern int dw_spi_resume_host(struct dw_spi *dws); +extern void dw_spi_xfer_done(struct dw_spi *dws); + +/* platform related setup */ +extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ #endif /* DW_SPI_HEADER_H */ -- cgit v1.2.3 From c7b61de5b7b17f0df34dc7d2f8b9576f8bd36fce Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 1 Dec 2010 00:14:42 +0100 Subject: PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3) This patch (as1431c) makes the synchronous runtime-PM interface suitable for use in interrupt handlers. Subsystems can call the new pm_runtime_irq_safe() function to tell the PM core that a device's runtime_suspend and runtime_resume callbacks should be invoked with interrupts disabled and the spinlock held. This permits the pm_runtime_get_sync() and the new pm_runtime_put_sync_suspend() routines to be called from within interrupt handlers. When a device is declared irq-safe in this way, the PM core increments the parent's usage count, so the parent will never be runtime suspended. This prevents difficult situations in which an irq-safe device can't resume because it is forced to wait for its non-irq-safe parent. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki --- include/linux/pm.h | 1 + include/linux/pm_runtime.h | 7 +++++++ 2 files changed, 8 insertions(+) (limited to 'include') diff --git a/include/linux/pm.h b/include/linux/pm.h index 40f3f45702ba..61f2066e6852 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -486,6 +486,7 @@ struct dev_pm_info { unsigned int run_wake:1; unsigned int runtime_auto:1; unsigned int no_callbacks:1; + unsigned int irq_safe:1; unsigned int use_autosuspend:1; unsigned int timer_autosuspends:1; enum rpm_request request; diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index d19f1cca7f74..e9cc049ccb62 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -40,6 +40,7 @@ extern int pm_generic_runtime_idle(struct device *dev); extern int pm_generic_runtime_suspend(struct device *dev); extern int pm_generic_runtime_resume(struct device *dev); extern void pm_runtime_no_callbacks(struct device *dev); +extern void pm_runtime_irq_safe(struct device *dev); extern void __pm_runtime_use_autosuspend(struct device *dev, bool use); extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); extern unsigned long pm_runtime_autosuspend_expiration(struct device *dev); @@ -124,6 +125,7 @@ static inline int pm_generic_runtime_idle(struct device *dev) { return 0; } static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; } static inline int pm_generic_runtime_resume(struct device *dev) { return 0; } static inline void pm_runtime_no_callbacks(struct device *dev) {} +static inline void pm_runtime_irq_safe(struct device *dev) {} static inline void pm_runtime_mark_last_busy(struct device *dev) {} static inline void __pm_runtime_use_autosuspend(struct device *dev, @@ -196,6 +198,11 @@ static inline int pm_runtime_put_sync(struct device *dev) return __pm_runtime_idle(dev, RPM_GET_PUT); } +static inline int pm_runtime_put_sync_suspend(struct device *dev) +{ + return __pm_runtime_suspend(dev, RPM_GET_PUT); +} + static inline int pm_runtime_put_sync_autosuspend(struct device *dev) { return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_AUTO); -- cgit v1.2.3 From a2867e08c8e3bdbc00caf56bc3bdde19ccc058e3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 Dec 2010 22:58:31 +0100 Subject: PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending() To avoid confusion with the meaning and return value of pm_check_wakeup_events() replace it with pm_wakeup_pending() that will work the other way around (ie. return true when system-wide power transition should be aborted). Signed-off-by: Rafael J. Wysocki --- include/linux/suspend.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 26697514c5ec..144b34be5c32 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -292,7 +292,7 @@ extern int unregister_pm_notifier(struct notifier_block *nb); /* drivers/base/power/wakeup.c */ extern bool events_check_enabled; -extern bool pm_check_wakeup_events(void); +extern bool pm_wakeup_pending(void); extern bool pm_get_wakeup_count(unsigned int *count); extern bool pm_save_wakeup_count(unsigned int count); #else /* !CONFIG_PM_SLEEP */ @@ -309,7 +309,7 @@ static inline int unregister_pm_notifier(struct notifier_block *nb) #define pm_notifier(fn, pri) do { (void)(fn); } while (0) -static inline bool pm_check_wakeup_events(void) { return true; } +static inline bool pm_wakeup_pending(void) { return false; } #endif /* !CONFIG_PM_SLEEP */ extern struct mutex pm_mutex; -- cgit v1.2.3 From b8c76f6aed0ab7df73a6410f3f82de2c831bb144 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 16 Dec 2010 00:51:21 +0100 Subject: PM: Replace the device power.status field with a bit field The device power.status field is too complicated for its purpose (storing the information about whether or not the device is in the "active" state from the PM core's point of view), so replace it with a bit field and modify all of its users accordingly. Signed-off-by: Rafael J. Wysocki --- include/linux/device.h | 4 ++-- include/linux/pm.h | 43 ++----------------------------------------- 2 files changed, 4 insertions(+), 43 deletions(-) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index dd4895313468..45bc8c1669d2 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -508,13 +508,13 @@ static inline int device_is_registered(struct device *dev) static inline void device_enable_async_suspend(struct device *dev) { - if (dev->power.status == DPM_ON) + if (!dev->power.in_suspend) dev->power.async_suspend = true; } static inline void device_disable_async_suspend(struct device *dev) { - if (dev->power.status == DPM_ON) + if (!dev->power.in_suspend) dev->power.async_suspend = false; } diff --git a/include/linux/pm.h b/include/linux/pm.h index 61f2066e6852..c1756dfeb8c5 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -366,45 +366,6 @@ extern struct dev_pm_ops generic_subsys_pm_ops; #define PMSG_AUTO_RESUME ((struct pm_message) \ { .event = PM_EVENT_AUTO_RESUME, }) -/** - * Device power management states - * - * These state labels are used internally by the PM core to indicate the current - * status of a device with respect to the PM core operations. - * - * DPM_ON Device is regarded as operational. Set this way - * initially and when ->complete() is about to be called. - * Also set when ->prepare() fails. - * - * DPM_PREPARING Device is going to be prepared for a PM transition. Set - * when ->prepare() is about to be called. - * - * DPM_RESUMING Device is going to be resumed. Set when ->resume(), - * ->thaw(), or ->restore() is about to be called. - * - * DPM_SUSPENDING Device has been prepared for a power transition. Set - * when ->prepare() has just succeeded. - * - * DPM_OFF Device is regarded as inactive. Set immediately after - * ->suspend(), ->freeze(), or ->poweroff() has succeeded. - * Also set when ->resume()_noirq, ->thaw_noirq(), or - * ->restore_noirq() is about to be called. - * - * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after - * ->suspend_noirq(), ->freeze_noirq(), or - * ->poweroff_noirq() has just succeeded. - */ - -enum dpm_state { - DPM_INVALID, - DPM_ON, - DPM_PREPARING, - DPM_RESUMING, - DPM_SUSPENDING, - DPM_OFF, - DPM_OFF_IRQ, -}; - /** * Device run-time power management status. * @@ -463,8 +424,8 @@ struct wakeup_source; struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; - unsigned async_suspend:1; - enum dpm_state status; /* Owned by the PM core */ + unsigned int async_suspend:1; + unsigned int in_suspend:1; /* Owned by the PM core */ spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; -- cgit v1.2.3 From 4b31db8a16fa0d4d6a0fa42d044e7a4f4dad3641 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 24 Dec 2010 15:04:06 +0100 Subject: PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally The __pm_generic_resume() function changes the given device's runtime PM status to RPM_ACTIVE if its driver's callback returns 0, but it only should do that if the rumtime PM is enabled for the device. Signed-off-by: Rafael J. Wysocki --- include/linux/pm_runtime.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index e9cc049ccb62..d34f067e2a7f 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -82,6 +82,11 @@ static inline bool pm_runtime_suspended(struct device *dev) && !dev->power.disable_depth; } +static inline bool pm_runtime_enabled(struct device *dev) +{ + return !dev->power.disable_depth; +} + static inline void pm_runtime_mark_last_busy(struct device *dev) { ACCESS_ONCE(dev->power.last_busy) = jiffies; @@ -120,6 +125,7 @@ static inline void pm_runtime_put_noidle(struct device *dev) {} static inline bool device_run_wake(struct device *dev) { return false; } static inline void device_set_run_wake(struct device *dev, bool enable) {} static inline bool pm_runtime_suspended(struct device *dev) { return false; } +static inline bool pm_runtime_enabled(struct device *dev) { return false; } static inline int pm_generic_runtime_idle(struct device *dev) { return 0; } static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; } -- cgit v1.2.3 From 62bcb91573425975d6ad2389d7ab1d8feca88ab4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 24 Dec 2010 15:04:41 +0100 Subject: PM: Prototype the pm_generic_ operations The pm_generic_ operations are all exported but are not prototyped in any header file for direct use. Do so. [rjw: Added extern.] Signed-off-by: Mark Brown Signed-off-by: Rafael J. Wysocki --- include/linux/pm.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/pm.h b/include/linux/pm.h index c1756dfeb8c5..dd9c7ab38270 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -572,4 +572,11 @@ extern unsigned int pm_flags; #define PM_APM 1 #define PM_ACPI 2 +extern int pm_generic_suspend(struct device *dev); +extern int pm_generic_resume(struct device *dev); +extern int pm_generic_freeze(struct device *dev); +extern int pm_generic_thaw(struct device *dev); +extern int pm_generic_restore(struct device *dev); +extern int pm_generic_poweroff(struct device *dev); + #endif /* _LINUX_PM_H */ -- cgit v1.2.3 From 00df055ae315c9c8792dc4d012e6ad9c4d527e87 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 29 Oct 2010 11:31:39 -0300 Subject: [media] radio-si4713: Add regulator framework support Convert the driver to use regulator framework instead of set_power callback. This with gpio_reset platform data provide cleaner way to manage chip VIO, VDD and reset signal inside the driver. Signed-off-by: Jarkko Nikula Cc: Eduardo Valentin Signed-off-by: Mauro Carvalho Chehab --- include/media/si4713.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/media/si4713.h b/include/media/si4713.h index 99850a54ed09..ed7353e8a982 100644 --- a/include/media/si4713.h +++ b/include/media/si4713.h @@ -23,8 +23,7 @@ * Platform dependent definition */ struct si4713_platform_data { - /* Set power state, zero is off, non-zero is on. */ - int (*set_power)(int power); + int gpio_reset; /* < 0 if not used */ }; /* -- cgit v1.2.3 From 2997137be8eba5bf9c07a24d5fda1f4225f9ca7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Fri, 29 Oct 2010 16:08:02 -0300 Subject: [media] ir-core: convert drivers/media/video/cx88 to ir-core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch converts the cx88 driver (for sampling hw) to use the decoders provided by ir-core instead of the separate ones provided by ir-functions (and gets rid of those). The value for MO_DDS_IO had a comment saying it corresponded to a 4kHz samplerate. That comment was unfortunately misleading. The actual samplerate was something like 3250Hz. The current value has been derived by analyzing the elapsed time between interrupts for different values (knowing that each interrupt corresponds to 32 samples). Thanks to Mariusz Bialonczyk for testing my patches (about one a day for two weeks!) on actual hardware. Signed-off-by: David Härdeman Acked-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-common.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 528050e39ad9..415242047b6a 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -96,9 +96,6 @@ void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir); void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir, u32 ir_key); u32 ir_extract_bits(u32 data, u32 mask); -int ir_dump_samples(u32 *samples, int count); -int ir_decode_biphase(u32 *samples, int count, int low, int high); -int ir_decode_pulsedistance(u32 *samples, int count, int low, int high); u32 ir_rc5_decode(unsigned int code); void ir_rc5_timer_end(unsigned long data); -- cgit v1.2.3 From 62c6503125389763a74911408d984c5dd09eeb97 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= Date: Fri, 29 Oct 2010 16:08:07 -0300 Subject: [media] ir-core: remove remaining users of the ir-functions keyhandlers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch removes the remaining usages of the ir_input_nokey() and ir_input_keydown() functions provided by drivers/media/IR/ir-functions.c by using the corresponding functionality in ir-core instead. Signed-off-by: David Härdeman Acked-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-common.h | 31 +++---------------------------- include/media/ir-core.h | 3 ++- include/media/ir-kbd-i2c.h | 4 ++-- 3 files changed, 7 insertions(+), 31 deletions(-) (limited to 'include') diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 415242047b6a..4a32e89a3cfe 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -1,7 +1,7 @@ /* - * - * some common structs and functions to handle infrared remotes via - * input layer ... + * some common functions to handle infrared remote protocol decoding for + * drivers which have not yet been (or can't be) converted to use the + * regular protocol decoders... * * (c) 2003 Gerd Knorr [SuSE Labs] * @@ -33,30 +33,17 @@ #define RC5_ADDR(x) (((x)>>6)&31) #define RC5_INSTR(x) ((x)&63) -struct ir_input_state { - /* configuration */ - u64 ir_type; - - /* key info */ - u32 ir_key; /* ir scancode */ - u32 keycode; /* linux key code */ - int keypressed; /* current state */ -}; - /* this was saa7134_ir and bttv_ir, moved here for * rc5 decoding. */ struct card_ir { struct input_dev *dev; - struct ir_input_state ir; char name[32]; char phys[32]; int users; - u32 running:1; struct ir_dev_props props; /* Usual gpio signalling */ - u32 mask_keycode; u32 mask_keydown; u32 mask_keyup; @@ -65,7 +52,6 @@ struct card_ir { int shift_by; int start; // What should RC5_START() be int addr; // What RC5_ADDR() should be. - int rc5_key_timeout; int rc5_remote_gap; struct work_struct work; struct timer_list timer; @@ -73,8 +59,6 @@ struct card_ir { /* RC5 gpio */ u32 rc5_gpio; struct timer_list timer_end; /* timer_end for code completion */ - struct timer_list timer_keyup; /* timer_end for key release */ - u32 last_rc5; /* last good rc5 code */ u32 last_bit; /* last raw bit seen */ u32 code; /* raw code under construction */ struct timeval base_time; /* time of last seen code */ @@ -89,16 +73,7 @@ struct card_ir { }; /* Routines from ir-functions.c */ - -int ir_input_init(struct input_dev *dev, struct ir_input_state *ir, - const u64 ir_type); -void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir); -void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir, - u32 ir_key); u32 ir_extract_bits(u32 data, u32 mask); -u32 ir_rc5_decode(unsigned int code); - void ir_rc5_timer_end(unsigned long data); -void ir_rc5_timer_keyup(unsigned long data); #endif diff --git a/include/media/ir-core.h b/include/media/ir-core.h index 6dc37fae6606..bff75f258fbc 100644 --- a/include/media/ir-core.h +++ b/include/media/ir-core.h @@ -159,7 +159,8 @@ void ir_input_unregister(struct input_dev *input_dev); void ir_repeat(struct input_dev *dev); void ir_keydown(struct input_dev *dev, int scancode, u8 toggle); -void ir_keyup(struct ir_input_dev *ir); +void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle); +void ir_keyup(struct input_dev *dev); u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode); /* From ir-raw-event.c */ diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index 557c676ab7dc..8c37b5ec0cf6 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -12,8 +12,7 @@ struct IR_i2c { struct i2c_client *c; struct input_dev *input; - struct ir_input_state ir; - u64 ir_type; + /* Used to avoid fast repeating */ unsigned char old; @@ -41,6 +40,7 @@ struct IR_i2c_init_data { const char *name; u64 type; /* IR_TYPE_RC5, etc */ u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */ + /* * Specify either a function pointer or a value indicating one of * ir_kbd_i2c's internal get_key functions -- cgit v1.2.3 From 3ffea4988be3f3fa65f2104ba31eff2b5e0e82a0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= Date: Fri, 29 Oct 2010 16:08:12 -0300 Subject: [media] ir-core: more cleanups of ir-functions.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit cx88 only depends on VIDEO_IR because it needs ir_extract_bits(). Move that function to ir-core.h and make it inline. Lots of drivers had dependencies on VIDEO_IR when they really wanted IR_CORE. The only remaining drivers to depend on VIDEO_IR are bt8xx and saa7134 (ir_rc5_timer_end is the only function exported by ir-functions). Rename VIDEO_IR -> IR_LEGACY to give a hint to anyone writing or converting drivers to IR_CORE that they do not want a dependency on IR_LEGACY. Signed-off-by: David Härdeman Acked-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-common.h | 1 - include/media/ir-core.h | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 4a32e89a3cfe..d1ae869f962c 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -73,7 +73,6 @@ struct card_ir { }; /* Routines from ir-functions.c */ -u32 ir_extract_bits(u32 data, u32 mask); void ir_rc5_timer_end(unsigned long data); #endif diff --git a/include/media/ir-core.h b/include/media/ir-core.h index bff75f258fbc..53048a2eefb9 100644 --- a/include/media/ir-core.h +++ b/include/media/ir-core.h @@ -212,4 +212,23 @@ static inline void ir_raw_event_reset(struct input_dev *input_dev) ir_raw_event_handle(input_dev); } + +/* extract mask bits out of data and pack them into the result */ +static inline u32 ir_extract_bits(u32 data, u32 mask) +{ + u32 vbit = 1, value = 0; + + do { + if (mask & 1) { + if (data & 1) + value |= vbit; + vbit <<= 1; + } + data >>= 1; + } while (mask >>= 1); + + return value; +} + + #endif /* _IR_CORE */ -- cgit v1.2.3 From 4c7b355df6e7f05304e05f6b7a286e59a5f1cc54 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Wed, 10 Nov 2010 11:04:19 -0300 Subject: [media] rc-core: Code cleanup after merging rc-sysfs and rc-map into rc-main MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [mchehab@redhat.com: this patch were originally bundled with some renaming stuff and with the file merges, as seen at: https://patchwork.kernel.org/patch/291092/. Instead of using the original approach, I wrote the rename patches and the code merge as separate changes, then applied the difference on this patch. This way, it is easier to see the real changes at the code, and will be easier to merge upstream, especially if some conflict rises on the renaming patches] Signed-off-by: David Härdeman Acked-by: Jarod Wilson Tested-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-core.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/media/ir-core.h b/include/media/ir-core.h index 53048a2eefb9..d41502d9919c 100644 --- a/include/media/ir-core.h +++ b/include/media/ir-core.h @@ -117,7 +117,6 @@ enum raw_event_type { #define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr) -/* From ir-keytable.c */ int __ir_input_register(struct input_dev *dev, const struct ir_scancode_table *ir_codes, struct ir_dev_props *props, @@ -164,7 +163,6 @@ void ir_keyup(struct input_dev *dev); u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode); /* From ir-raw-event.c */ - struct ir_raw_event { union { u32 duration; -- cgit v1.2.3 From d8b4b5822f51e2142b731b42c81e3f03eec475b2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= Date: Fri, 29 Oct 2010 16:08:23 -0300 Subject: [media] ir-core: make struct rc_dev the primary interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch merges the ir_input_dev and ir_dev_props structs into a single struct called rc_dev. The drivers and various functions in rc-core used by the drivers are also changed to use rc_dev as the primary interface when dealing with rc-core. This means that the input_dev is abstracted away from the drivers which is necessary if we ever want to support multiple input devs per rc device. The new API is similar to what the input subsystem uses, i.e: rc_device_alloc() rc_device_free() rc_device_register() rc_device_unregister() [mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts] Signed-off-by: David Härdeman Acked-by: Jarod Wilson Tested-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-common.h | 3 +- include/media/ir-core.h | 181 ++++++++++++++++++++------------------------- include/media/ir-kbd-i2c.h | 3 +- 3 files changed, 82 insertions(+), 105 deletions(-) (limited to 'include') diff --git a/include/media/ir-common.h b/include/media/ir-common.h index d1ae869f962c..41fefd9816ea 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -36,12 +36,11 @@ /* this was saa7134_ir and bttv_ir, moved here for * rc5 decoding. */ struct card_ir { - struct input_dev *dev; + struct rc_dev *dev; char name[32]; char phys[32]; int users; u32 running:1; - struct ir_dev_props props; /* Usual gpio signalling */ u32 mask_keycode; diff --git a/include/media/ir-core.h b/include/media/ir-core.h index d41502d9919c..c5909981b075 100644 --- a/include/media/ir-core.h +++ b/include/media/ir-core.h @@ -32,21 +32,38 @@ enum rc_driver_type { }; /** - * struct ir_dev_props - Allow caller drivers to set special properties - * @driver_type: specifies if the driver or hardware have already a decoder, - * or if it needs to use the IR raw event decoders to produce a scancode + * struct rc_dev - represents a remote control device + * @dev: driver model's view of this device + * @input_name: name of the input child device + * @input_phys: physical path to the input child device + * @input_id: id of the input child device (struct input_id) + * @driver_name: name of the hardware driver which registered this device + * @map_name: name of the default keymap + * @rc_tab: current scan/key table + * @devno: unique remote control device number + * @raw: additional data for raw pulse/space devices + * @input_dev: the input child device used to communicate events to userspace + * @driver_type: specifies if protocol decoding is done in hardware or software + * @idle: used to keep track of RX state * @allowed_protos: bitmask with the supported IR_TYPE_* protocols * @scanmask: some hardware decoders are not capable of providing the full * scancode to the application. As this is a hardware limit, we can't do * anything with it. Yet, as the same keycode table can be used with other * devices, a mask is provided to allow its usage. Drivers should generally * leave this field in blank + * @priv: driver-specific data + * @keylock: protects the remaining members of the struct + * @keypressed: whether a key is currently pressed + * @keyup_jiffies: time (in jiffies) when the current keypress should be released + * @timer_keyup: timer for releasing a keypress + * @last_keycode: keycode of last keypress + * @last_scancode: scancode of last keypress + * @last_toggle: toggle value of last command * @timeout: optional time after which device stops sending data * @min_timeout: minimum timeout supported by device * @max_timeout: maximum timeout supported by device * @rx_resolution : resolution (in ns) of input sampler * @tx_resolution: resolution (in ns) of output sampler - * @priv: driver-specific data, to be used on the callbacks * @change_protocol: allow changing the protocol used on hardware decoders * @open: callback to allow drivers to enable polling/irq when IR input device * is opened. @@ -57,55 +74,50 @@ enum rc_driver_type { * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) * @s_rx_carrier: inform driver about carrier it is expected to handle * @tx_ir: transmit IR - * @s_idle: optional: enable/disable hardware idle mode, upon which, - device doesn't interrupt host until it sees IR pulses + * @s_idle: enable/disable hardware idle mode, upon which, + * device doesn't interrupt host until it sees IR pulses * @s_learning_mode: enable wide band receiver used for learning * @s_carrier_report: enable carrier reports */ -struct ir_dev_props { - enum rc_driver_type driver_type; - unsigned long allowed_protos; - u32 scanmask; - - u32 timeout; - u32 min_timeout; - u32 max_timeout; - - u32 rx_resolution; - u32 tx_resolution; - - void *priv; - int (*change_protocol)(void *priv, u64 ir_type); - int (*open)(void *priv); - void (*close)(void *priv); - int (*s_tx_mask)(void *priv, u32 mask); - int (*s_tx_carrier)(void *priv, u32 carrier); - int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle); - int (*s_rx_carrier_range)(void *priv, u32 min, u32 max); - int (*tx_ir)(void *priv, int *txbuf, u32 n); - void (*s_idle)(void *priv, bool enable); - int (*s_learning_mode)(void *priv, int enable); - int (*s_carrier_report) (void *priv, int enable); -}; - -struct ir_input_dev { - struct device dev; /* device */ - char *driver_name; /* Name of the driver module */ - struct ir_scancode_table rc_tab; /* scan/key table */ - unsigned long devno; /* device number */ - struct ir_dev_props *props; /* Device properties */ - struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */ - struct input_dev *input_dev; /* the input device associated with this device */ +struct rc_dev { + struct device dev; + const char *input_name; + const char *input_phys; + struct input_id input_id; + char *driver_name; + const char *map_name; + struct ir_scancode_table rc_tab; + unsigned long devno; + struct ir_raw_event_ctrl *raw; + struct input_dev *input_dev; + enum rc_driver_type driver_type; bool idle; - - /* key info - needed by IR keycode handlers */ - spinlock_t keylock; /* protects the below members */ - bool keypressed; /* current state */ - unsigned long keyup_jiffies; /* when should the current keypress be released? */ - struct timer_list timer_keyup; /* timer for releasing a keypress */ - u32 last_keycode; /* keycode of last command */ - u32 last_scancode; /* scancode of last command */ - u8 last_toggle; /* toggle of last command */ + u64 allowed_protos; + u32 scanmask; + void *priv; + spinlock_t keylock; + bool keypressed; + unsigned long keyup_jiffies; + struct timer_list timer_keyup; + u32 last_keycode; + u32 last_scancode; + u8 last_toggle; + u32 timeout; + u32 min_timeout; + u32 max_timeout; + u32 rx_resolution; + u32 tx_resolution; + int (*change_protocol)(struct rc_dev *dev, u64 ir_type); + int (*open)(struct rc_dev *dev); + void (*close)(struct rc_dev *dev); + int (*s_tx_mask)(struct rc_dev *dev, u32 mask); + int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); + int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); + int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); + int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n); + void (*s_idle)(struct rc_dev *dev, bool enable); + int (*s_learning_mode)(struct rc_dev *dev, int enable); + int (*s_carrier_report) (struct rc_dev *dev, int enable); }; enum raw_event_type { @@ -115,52 +127,14 @@ enum raw_event_type { IR_STOP_EVENT = (1 << 3), }; -#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr) - -int __ir_input_register(struct input_dev *dev, - const struct ir_scancode_table *ir_codes, - struct ir_dev_props *props, - const char *driver_name); - -static inline int ir_input_register(struct input_dev *dev, - const char *map_name, - struct ir_dev_props *props, - const char *driver_name) { - struct ir_scancode_table *ir_codes; - struct ir_input_dev *ir_dev; - int rc; - - if (!map_name) - return -EINVAL; - - ir_codes = get_rc_map(map_name); - if (!ir_codes) { - ir_codes = get_rc_map(RC_MAP_EMPTY); +#define to_rc_dev(d) container_of(d, struct rc_dev, dev) - if (!ir_codes) - return -EINVAL; - } - rc = __ir_input_register(dev, ir_codes, props, driver_name); - if (rc < 0) - return -EINVAL; - - ir_dev = input_get_drvdata(dev); - - if (!rc && ir_dev->props && ir_dev->props->change_protocol) - rc = ir_dev->props->change_protocol(ir_dev->props->priv, - ir_codes->ir_type); - - return rc; -} - -void ir_input_unregister(struct input_dev *input_dev); - -void ir_repeat(struct input_dev *dev); -void ir_keydown(struct input_dev *dev, int scancode, u8 toggle); -void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle); -void ir_keyup(struct input_dev *dev); -u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode); +void ir_repeat(struct rc_dev *dev); +void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle); +void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); +void ir_keyup(struct rc_dev *dev); +u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode); /* From ir-raw-event.c */ struct ir_raw_event { @@ -194,20 +168,25 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev) #define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ -void ir_raw_event_handle(struct input_dev *input_dev); -int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev); -int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type); -int ir_raw_event_store_with_filter(struct input_dev *input_dev, +struct rc_dev *rc_allocate_device(void); +void rc_free_device(struct rc_dev *dev); +int rc_register_device(struct rc_dev *dev); +void rc_unregister_device(struct rc_dev *dev); + +void ir_raw_event_handle(struct rc_dev *dev); +int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); +int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); +int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev); -void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle); +void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); -static inline void ir_raw_event_reset(struct input_dev *input_dev) +static inline void ir_raw_event_reset(struct rc_dev *dev) { DEFINE_IR_RAW_EVENT(ev); ev.reset = true; - ir_raw_event_store(input_dev, &ev); - ir_raw_event_handle(input_dev); + ir_raw_event_store(dev, &ev); + ir_raw_event_handle(dev); } diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index 8c37b5ec0cf6..4ee9b42cbf72 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -9,9 +9,8 @@ struct IR_i2c; struct IR_i2c { char *ir_codes; - struct i2c_client *c; - struct input_dev *input; + struct rc_dev *rc; /* Used to avoid fast repeating */ unsigned char old; -- cgit v1.2.3 From 2eb258327722de3ed4d84ce1b9add2bad21a0ec4 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 12 Nov 2010 09:02:40 -0300 Subject: [media] ir-kbd-i2c: add rc_dev as a parameter to the driver There are several fields on rc_dev that drivers can benefit. Allow drivers to pass it as a parameter to the driver. For now, the rc_dev parameter is optional. If drivers don't pass it, create them internally. However, the best is to create rc_dev inside the drivers, in order to fill other fields, like open(), close(), driver_name, etc. So, a latter patch making it mandatory and changing the caller drivers is welcome. Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-kbd-i2c.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index 4ee9b42cbf72..aca015e04f17 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -46,5 +46,7 @@ struct IR_i2c_init_data { */ int (*get_key)(struct IR_i2c*, u32*, u32*); enum ir_kbd_get_key_fn internal_get_key_func; + + struct rc_dev *rc_dev; }; #endif -- cgit v1.2.3 From 9eae42e5a216059a146b3fbbe24b4fdc0b10c723 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Mon, 8 Nov 2010 10:45:44 -0300 Subject: [media] media: Add timberdale video-in driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds the timberdale video-in driver. The video IP of timberdale delivers the video data via DMA. The driver uses the DMA api to handle DMA transfers, and make use of the V4L2 video buffers to handle buffers against user space. If available the driver uses an encoder to get/set the video standard Signed-off-by: Richard Röjfors Signed-off-by: Mauro Carvalho Chehab --- include/media/timb_radio.h | 1 - include/media/timb_video.h | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+), 1 deletion(-) create mode 100644 include/media/timb_video.h (limited to 'include') diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h index fcd32a3696ba..a59a84854dc1 100644 --- a/include/media/timb_radio.h +++ b/include/media/timb_radio.h @@ -24,7 +24,6 @@ struct timb_radio_platform_data { int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */ struct { - const char *module_name; struct i2c_board_info *info; } tuner; struct { diff --git a/include/media/timb_video.h b/include/media/timb_video.h new file mode 100644 index 000000000000..70ae43970a49 --- /dev/null +++ b/include/media/timb_video.h @@ -0,0 +1,33 @@ +/* + * timb_video.h Platform struct for the Timberdale video driver + * Copyright (c) 2009-2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _TIMB_VIDEO_ +#define _TIMB_VIDEO_ 1 + +#include + +struct timb_video_platform_data { + int dma_channel; + int i2c_adapter; /* The I2C adapter where the encoder is attached */ + struct { + const char *module_name; + struct i2c_board_info *info; + } encoder; +}; + +#endif -- cgit v1.2.3 From a6e3b81f6198654207c4e972e7ed91931e53e93c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Nov 2010 10:05:29 -0300 Subject: [media] rc: Remove ir-common.h Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-common.h | 77 ---------------------------------------------- include/media/ir-kbd-i2c.h | 2 +- 2 files changed, 1 insertion(+), 78 deletions(-) delete mode 100644 include/media/ir-common.h (limited to 'include') diff --git a/include/media/ir-common.h b/include/media/ir-common.h deleted file mode 100644 index 41fefd9816ea..000000000000 --- a/include/media/ir-common.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * some common functions to handle infrared remote protocol decoding for - * drivers which have not yet been (or can't be) converted to use the - * regular protocol decoders... - * - * (c) 2003 Gerd Knorr [SuSE Labs] - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _IR_COMMON -#define _IR_COMMON - -#include -#include -#include -#include - -#define RC5_START(x) (((x)>>12)&3) -#define RC5_TOGGLE(x) (((x)>>11)&1) -#define RC5_ADDR(x) (((x)>>6)&31) -#define RC5_INSTR(x) ((x)&63) - -/* this was saa7134_ir and bttv_ir, moved here for - * rc5 decoding. */ -struct card_ir { - struct rc_dev *dev; - char name[32]; - char phys[32]; - int users; - u32 running:1; - - /* Usual gpio signalling */ - u32 mask_keycode; - u32 mask_keydown; - u32 mask_keyup; - u32 polling; - u32 last_gpio; - int shift_by; - int start; // What should RC5_START() be - int addr; // What RC5_ADDR() should be. - int rc5_remote_gap; - struct work_struct work; - struct timer_list timer; - - /* RC5 gpio */ - u32 rc5_gpio; - struct timer_list timer_end; /* timer_end for code completion */ - u32 last_bit; /* last raw bit seen */ - u32 code; /* raw code under construction */ - struct timeval base_time; /* time of last seen code */ - int active; /* building raw code */ - - /* NEC decoding */ - u32 nec_gpio; - struct tasklet_struct tlet; - - /* IR core raw decoding */ - u32 raw_decode; -}; - -/* Routines from ir-functions.c */ -void ir_rc5_timer_end(unsigned long data); - -#endif diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index aca015e04f17..d27505f2448e 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -1,7 +1,7 @@ #ifndef _IR_I2C #define _IR_I2C -#include +#include #define DEFAULT_POLLING_INTERVAL 100 /* ms */ -- cgit v1.2.3 From 6bda96447cef24fbf97a798b1ea664224d5fdc25 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Nov 2010 13:28:38 -0300 Subject: [media] rc: rename the remaining things to rc_core The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-core.h | 211 --------------------------------------------- include/media/ir-kbd-i2c.h | 2 +- include/media/rc-core.h | 211 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 212 insertions(+), 212 deletions(-) delete mode 100644 include/media/ir-core.h create mode 100644 include/media/rc-core.h (limited to 'include') diff --git a/include/media/ir-core.h b/include/media/ir-core.h deleted file mode 100644 index c5909981b075..000000000000 --- a/include/media/ir-core.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Remote Controller core header - * - * Copyright (C) 2009-2010 by Mauro Carvalho Chehab - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _IR_CORE -#define _IR_CORE - -#include -#include -#include -#include -#include - -extern int ir_core_debug; -#define IR_dprintk(level, fmt, arg...) if (ir_core_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt , __func__, ## arg) - -enum rc_driver_type { - RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ - RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */ -}; - -/** - * struct rc_dev - represents a remote control device - * @dev: driver model's view of this device - * @input_name: name of the input child device - * @input_phys: physical path to the input child device - * @input_id: id of the input child device (struct input_id) - * @driver_name: name of the hardware driver which registered this device - * @map_name: name of the default keymap - * @rc_tab: current scan/key table - * @devno: unique remote control device number - * @raw: additional data for raw pulse/space devices - * @input_dev: the input child device used to communicate events to userspace - * @driver_type: specifies if protocol decoding is done in hardware or software - * @idle: used to keep track of RX state - * @allowed_protos: bitmask with the supported IR_TYPE_* protocols - * @scanmask: some hardware decoders are not capable of providing the full - * scancode to the application. As this is a hardware limit, we can't do - * anything with it. Yet, as the same keycode table can be used with other - * devices, a mask is provided to allow its usage. Drivers should generally - * leave this field in blank - * @priv: driver-specific data - * @keylock: protects the remaining members of the struct - * @keypressed: whether a key is currently pressed - * @keyup_jiffies: time (in jiffies) when the current keypress should be released - * @timer_keyup: timer for releasing a keypress - * @last_keycode: keycode of last keypress - * @last_scancode: scancode of last keypress - * @last_toggle: toggle value of last command - * @timeout: optional time after which device stops sending data - * @min_timeout: minimum timeout supported by device - * @max_timeout: maximum timeout supported by device - * @rx_resolution : resolution (in ns) of input sampler - * @tx_resolution: resolution (in ns) of output sampler - * @change_protocol: allow changing the protocol used on hardware decoders - * @open: callback to allow drivers to enable polling/irq when IR input device - * is opened. - * @close: callback to allow drivers to disable polling/irq when IR input device - * is opened. - * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) - * @s_tx_carrier: set transmit carrier frequency - * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) - * @s_rx_carrier: inform driver about carrier it is expected to handle - * @tx_ir: transmit IR - * @s_idle: enable/disable hardware idle mode, upon which, - * device doesn't interrupt host until it sees IR pulses - * @s_learning_mode: enable wide band receiver used for learning - * @s_carrier_report: enable carrier reports - */ -struct rc_dev { - struct device dev; - const char *input_name; - const char *input_phys; - struct input_id input_id; - char *driver_name; - const char *map_name; - struct ir_scancode_table rc_tab; - unsigned long devno; - struct ir_raw_event_ctrl *raw; - struct input_dev *input_dev; - enum rc_driver_type driver_type; - bool idle; - u64 allowed_protos; - u32 scanmask; - void *priv; - spinlock_t keylock; - bool keypressed; - unsigned long keyup_jiffies; - struct timer_list timer_keyup; - u32 last_keycode; - u32 last_scancode; - u8 last_toggle; - u32 timeout; - u32 min_timeout; - u32 max_timeout; - u32 rx_resolution; - u32 tx_resolution; - int (*change_protocol)(struct rc_dev *dev, u64 ir_type); - int (*open)(struct rc_dev *dev); - void (*close)(struct rc_dev *dev); - int (*s_tx_mask)(struct rc_dev *dev, u32 mask); - int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); - int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); - int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); - int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n); - void (*s_idle)(struct rc_dev *dev, bool enable); - int (*s_learning_mode)(struct rc_dev *dev, int enable); - int (*s_carrier_report) (struct rc_dev *dev, int enable); -}; - -enum raw_event_type { - IR_SPACE = (1 << 0), - IR_PULSE = (1 << 1), - IR_START_EVENT = (1 << 2), - IR_STOP_EVENT = (1 << 3), -}; - -#define to_rc_dev(d) container_of(d, struct rc_dev, dev) - - -void ir_repeat(struct rc_dev *dev); -void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle); -void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); -void ir_keyup(struct rc_dev *dev); -u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode); - -/* From ir-raw-event.c */ -struct ir_raw_event { - union { - u32 duration; - - struct { - u32 carrier; - u8 duty_cycle; - }; - }; - - unsigned pulse:1; - unsigned reset:1; - unsigned timeout:1; - unsigned carrier_report:1; -}; - -#define DEFINE_IR_RAW_EVENT(event) \ - struct ir_raw_event event = { \ - { .duration = 0 } , \ - .pulse = 0, \ - .reset = 0, \ - .timeout = 0, \ - .carrier_report = 0 } - -static inline void init_ir_raw_event(struct ir_raw_event *ev) -{ - memset(ev, 0, sizeof(*ev)); -} - -#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ - -struct rc_dev *rc_allocate_device(void); -void rc_free_device(struct rc_dev *dev); -int rc_register_device(struct rc_dev *dev); -void rc_unregister_device(struct rc_dev *dev); - -void ir_raw_event_handle(struct rc_dev *dev); -int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); -int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); -int ir_raw_event_store_with_filter(struct rc_dev *dev, - struct ir_raw_event *ev); -void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); - -static inline void ir_raw_event_reset(struct rc_dev *dev) -{ - DEFINE_IR_RAW_EVENT(ev); - ev.reset = true; - - ir_raw_event_store(dev, &ev); - ir_raw_event_handle(dev); -} - - -/* extract mask bits out of data and pack them into the result */ -static inline u32 ir_extract_bits(u32 data, u32 mask) -{ - u32 vbit = 1, value = 0; - - do { - if (mask & 1) { - if (data & 1) - value |= vbit; - vbit <<= 1; - } - data >>= 1; - } while (mask >>= 1); - - return value; -} - - -#endif /* _IR_CORE */ diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index d27505f2448e..f22b359c37ff 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -1,7 +1,7 @@ #ifndef _IR_I2C #define _IR_I2C -#include +#include #define DEFAULT_POLLING_INTERVAL 100 /* ms */ diff --git a/include/media/rc-core.h b/include/media/rc-core.h new file mode 100644 index 000000000000..eedb2f0575a4 --- /dev/null +++ b/include/media/rc-core.h @@ -0,0 +1,211 @@ +/* + * Remote Controller core header + * + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _IR_CORE +#define _IR_CORE + +#include +#include +#include +#include +#include + +extern int rc_core_debug; +#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt , __func__, ## arg) + +enum rc_driver_type { + RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ + RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */ +}; + +/** + * struct rc_dev - represents a remote control device + * @dev: driver model's view of this device + * @input_name: name of the input child device + * @input_phys: physical path to the input child device + * @input_id: id of the input child device (struct input_id) + * @driver_name: name of the hardware driver which registered this device + * @map_name: name of the default keymap + * @rc_tab: current scan/key table + * @devno: unique remote control device number + * @raw: additional data for raw pulse/space devices + * @input_dev: the input child device used to communicate events to userspace + * @driver_type: specifies if protocol decoding is done in hardware or software + * @idle: used to keep track of RX state + * @allowed_protos: bitmask with the supported IR_TYPE_* protocols + * @scanmask: some hardware decoders are not capable of providing the full + * scancode to the application. As this is a hardware limit, we can't do + * anything with it. Yet, as the same keycode table can be used with other + * devices, a mask is provided to allow its usage. Drivers should generally + * leave this field in blank + * @priv: driver-specific data + * @keylock: protects the remaining members of the struct + * @keypressed: whether a key is currently pressed + * @keyup_jiffies: time (in jiffies) when the current keypress should be released + * @timer_keyup: timer for releasing a keypress + * @last_keycode: keycode of last keypress + * @last_scancode: scancode of last keypress + * @last_toggle: toggle value of last command + * @timeout: optional time after which device stops sending data + * @min_timeout: minimum timeout supported by device + * @max_timeout: maximum timeout supported by device + * @rx_resolution : resolution (in ns) of input sampler + * @tx_resolution: resolution (in ns) of output sampler + * @change_protocol: allow changing the protocol used on hardware decoders + * @open: callback to allow drivers to enable polling/irq when IR input device + * is opened. + * @close: callback to allow drivers to disable polling/irq when IR input device + * is opened. + * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) + * @s_tx_carrier: set transmit carrier frequency + * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) + * @s_rx_carrier: inform driver about carrier it is expected to handle + * @tx_ir: transmit IR + * @s_idle: enable/disable hardware idle mode, upon which, + * device doesn't interrupt host until it sees IR pulses + * @s_learning_mode: enable wide band receiver used for learning + * @s_carrier_report: enable carrier reports + */ +struct rc_dev { + struct device dev; + const char *input_name; + const char *input_phys; + struct input_id input_id; + char *driver_name; + const char *map_name; + struct ir_scancode_table rc_tab; + unsigned long devno; + struct ir_raw_event_ctrl *raw; + struct input_dev *input_dev; + enum rc_driver_type driver_type; + bool idle; + u64 allowed_protos; + u32 scanmask; + void *priv; + spinlock_t keylock; + bool keypressed; + unsigned long keyup_jiffies; + struct timer_list timer_keyup; + u32 last_keycode; + u32 last_scancode; + u8 last_toggle; + u32 timeout; + u32 min_timeout; + u32 max_timeout; + u32 rx_resolution; + u32 tx_resolution; + int (*change_protocol)(struct rc_dev *dev, u64 ir_type); + int (*open)(struct rc_dev *dev); + void (*close)(struct rc_dev *dev); + int (*s_tx_mask)(struct rc_dev *dev, u32 mask); + int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); + int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); + int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); + int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n); + void (*s_idle)(struct rc_dev *dev, bool enable); + int (*s_learning_mode)(struct rc_dev *dev, int enable); + int (*s_carrier_report) (struct rc_dev *dev, int enable); +}; + +enum raw_event_type { + IR_SPACE = (1 << 0), + IR_PULSE = (1 << 1), + IR_START_EVENT = (1 << 2), + IR_STOP_EVENT = (1 << 3), +}; + +#define to_rc_dev(d) container_of(d, struct rc_dev, dev) + + +void ir_repeat(struct rc_dev *dev); +void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle); +void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); +void ir_keyup(struct rc_dev *dev); +u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode); + +/* From ir-raw-event.c */ +struct ir_raw_event { + union { + u32 duration; + + struct { + u32 carrier; + u8 duty_cycle; + }; + }; + + unsigned pulse:1; + unsigned reset:1; + unsigned timeout:1; + unsigned carrier_report:1; +}; + +#define DEFINE_IR_RAW_EVENT(event) \ + struct ir_raw_event event = { \ + { .duration = 0 } , \ + .pulse = 0, \ + .reset = 0, \ + .timeout = 0, \ + .carrier_report = 0 } + +static inline void init_ir_raw_event(struct ir_raw_event *ev) +{ + memset(ev, 0, sizeof(*ev)); +} + +#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ + +struct rc_dev *rc_allocate_device(void); +void rc_free_device(struct rc_dev *dev); +int rc_register_device(struct rc_dev *dev); +void rc_unregister_device(struct rc_dev *dev); + +void ir_raw_event_handle(struct rc_dev *dev); +int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); +int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); +int ir_raw_event_store_with_filter(struct rc_dev *dev, + struct ir_raw_event *ev); +void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); + +static inline void ir_raw_event_reset(struct rc_dev *dev) +{ + DEFINE_IR_RAW_EVENT(ev); + ev.reset = true; + + ir_raw_event_store(dev, &ev); + ir_raw_event_handle(dev); +} + + +/* extract mask bits out of data and pack them into the result */ +static inline u32 ir_extract_bits(u32 data, u32 mask) +{ + u32 vbit = 1, value = 0; + + do { + if (mask & 1) { + if (data & 1) + value |= vbit; + vbit <<= 1; + } + data >>= 1; + } while (mask >>= 1); + + return value; +} + + +#endif /* _IR_CORE */ -- cgit v1.2.3 From ca86674b8a93ea11c4bb6f4dd0113b1adf1fa841 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Nov 2010 13:53:11 -0300 Subject: [media] Rename all public generic RC functions from ir_ to rc_ Those functions are not InfraRed specific. So, rename them to properly reflect it. Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-core.h | 49 +++++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/include/media/rc-core.h b/include/media/rc-core.h index eedb2f0575a4..170581b4fa84 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -13,8 +13,8 @@ * GNU General Public License for more details. */ -#ifndef _IR_CORE -#define _IR_CORE +#ifndef _RC_CORE +#define _RC_CORE #include #include @@ -120,6 +120,32 @@ struct rc_dev { int (*s_carrier_report) (struct rc_dev *dev, int enable); }; +#define to_rc_dev(d) container_of(d, struct rc_dev, dev) + +/* + * From rc-main.c + * Those functions can be used on any type of Remote Controller. They + * basically creates an input_dev and properly reports the device as a + * Remote Controller, at sys/class/rc. + */ + +struct rc_dev *rc_allocate_device(void); +void rc_free_device(struct rc_dev *dev); +int rc_register_device(struct rc_dev *dev); +void rc_unregister_device(struct rc_dev *dev); + +void rc_repeat(struct rc_dev *dev); +void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle); +void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); +void rc_keyup(struct rc_dev *dev); +u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode); + +/* + * From rc-raw.c + * The Raw interface is specific to InfraRed. It may be a good idea to + * split it later into a separate header. + */ + enum raw_event_type { IR_SPACE = (1 << 0), IR_PULSE = (1 << 1), @@ -127,16 +153,6 @@ enum raw_event_type { IR_STOP_EVENT = (1 << 3), }; -#define to_rc_dev(d) container_of(d, struct rc_dev, dev) - - -void ir_repeat(struct rc_dev *dev); -void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle); -void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); -void ir_keyup(struct rc_dev *dev); -u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode); - -/* From ir-raw-event.c */ struct ir_raw_event { union { u32 duration; @@ -168,11 +184,6 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev) #define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ -struct rc_dev *rc_allocate_device(void); -void rc_free_device(struct rc_dev *dev); -int rc_register_device(struct rc_dev *dev); -void rc_unregister_device(struct rc_dev *dev); - void ir_raw_event_handle(struct rc_dev *dev); int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); @@ -189,7 +200,6 @@ static inline void ir_raw_event_reset(struct rc_dev *dev) ir_raw_event_handle(dev); } - /* extract mask bits out of data and pack them into the result */ static inline u32 ir_extract_bits(u32 data, u32 mask) { @@ -207,5 +217,4 @@ static inline u32 ir_extract_bits(u32 data, u32 mask) return value; } - -#endif /* _IR_CORE */ +#endif /* _RC_CORE */ -- cgit v1.2.3 From 52b661449aecc47e652a164c0d8078b31e10aca0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Nov 2010 14:20:52 -0300 Subject: [media] rc: Rename remote controller type to rc_type instead of ir_type for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-kbd-i2c.h | 2 +- include/media/rc-core.h | 4 ++-- include/media/rc-map.h | 26 +++++++++++++------------- 3 files changed, 16 insertions(+), 16 deletions(-) (limited to 'include') diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index f22b359c37ff..768aa77925cd 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -37,7 +37,7 @@ enum ir_kbd_get_key_fn { struct IR_i2c_init_data { char *ir_codes; const char *name; - u64 type; /* IR_TYPE_RC5, etc */ + u64 type; /* RC_TYPE_RC5, etc */ u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */ /* diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 170581b4fa84..42543257fa0f 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -45,7 +45,7 @@ enum rc_driver_type { * @input_dev: the input child device used to communicate events to userspace * @driver_type: specifies if protocol decoding is done in hardware or software * @idle: used to keep track of RX state - * @allowed_protos: bitmask with the supported IR_TYPE_* protocols + * @allowed_protos: bitmask with the supported RC_TYPE_* protocols * @scanmask: some hardware decoders are not capable of providing the full * scancode to the application. As this is a hardware limit, we can't do * anything with it. Yet, as the same keycode table can be used with other @@ -107,7 +107,7 @@ struct rc_dev { u32 max_timeout; u32 rx_resolution; u32 tx_resolution; - int (*change_protocol)(struct rc_dev *dev, u64 ir_type); + int (*change_protocol)(struct rc_dev *dev, u64 rc_type); int (*open)(struct rc_dev *dev); void (*close)(struct rc_dev *dev); int (*s_tx_mask)(struct rc_dev *dev, u32 mask); diff --git a/include/media/rc-map.h b/include/media/rc-map.h index e0f17edf38ed..c53351e15f50 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -11,19 +11,19 @@ #include -#define IR_TYPE_UNKNOWN 0 -#define IR_TYPE_RC5 (1 << 0) /* Philips RC5 protocol */ -#define IR_TYPE_NEC (1 << 1) -#define IR_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */ -#define IR_TYPE_JVC (1 << 3) /* JVC protocol */ -#define IR_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ -#define IR_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */ -#define IR_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ -#define IR_TYPE_OTHER (1u << 31) +#define RC_TYPE_UNKNOWN 0 +#define RC_TYPE_RC5 (1 << 0) /* Philips RC5 protocol */ +#define RC_TYPE_NEC (1 << 1) +#define RC_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */ +#define RC_TYPE_JVC (1 << 3) /* JVC protocol */ +#define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ +#define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */ +#define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ +#define RC_TYPE_OTHER (1u << 31) -#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC | IR_TYPE_RC6 | \ - IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \ - IR_TYPE_RC5_SZ | IR_TYPE_OTHER) +#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ + RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ + RC_TYPE_RC5_SZ | RC_TYPE_OTHER) struct ir_scancode { u32 scancode; @@ -35,7 +35,7 @@ struct ir_scancode_table { unsigned int size; /* Max number of entries */ unsigned int len; /* Used number of entries */ unsigned int alloc; /* Size of *scan in bytes */ - u64 ir_type; + u64 rc_type; const char *name; spinlock_t lock; }; -- cgit v1.2.3 From b088ba658b3438056dab4d744701364db3f08b9a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Nov 2010 14:28:27 -0300 Subject: [media] rc: Properly name the rc_map struct The struct that describes a rc mapping had an weird and long name. We should properly name it, to make easier for developers to work with it, and to avoid confusion. Basically, generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode_table,rc_map,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_tab,rc_map,g <$i >a && mv a $i; done (and manually fixed where needed) Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-core.h | 4 ++-- include/media/rc-map.h | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 42543257fa0f..affb93feed3b 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -39,7 +39,7 @@ enum rc_driver_type { * @input_id: id of the input child device (struct input_id) * @driver_name: name of the hardware driver which registered this device * @map_name: name of the default keymap - * @rc_tab: current scan/key table + * @rc_map: current scan/key table * @devno: unique remote control device number * @raw: additional data for raw pulse/space devices * @input_dev: the input child device used to communicate events to userspace @@ -86,7 +86,7 @@ struct rc_dev { struct input_id input_id; char *driver_name; const char *map_name; - struct ir_scancode_table rc_tab; + struct rc_map rc_map; unsigned long devno; struct ir_raw_event_ctrl *raw; struct input_dev *input_dev; diff --git a/include/media/rc-map.h b/include/media/rc-map.h index c53351e15f50..a6b2738f2d60 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -30,7 +30,7 @@ struct ir_scancode { u32 keycode; }; -struct ir_scancode_table { +struct rc_map { struct ir_scancode *scan; unsigned int size; /* Max number of entries */ unsigned int len; /* Used number of entries */ @@ -42,14 +42,14 @@ struct ir_scancode_table { struct rc_keymap { struct list_head list; - struct ir_scancode_table map; + struct rc_map map; }; /* Routines from rc-map.c */ int ir_register_map(struct rc_keymap *map); void ir_unregister_map(struct rc_keymap *map); -struct ir_scancode_table *get_rc_map(const char *name); +struct rc_map *get_rc_map(const char *name); void rc_map_init(void); /* Names of the several keytables defined in-kernel */ -- cgit v1.2.3 From 2f4f58d689dd71dea67407b74405a3c43e797cb1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Nov 2010 15:46:09 -0300 Subject: [media] rc: Name RC keymap tables as rc_map_table Remote keytables had different names all over the place. Part of the fault is due to a bad naming when rc subsystem was created, but there were lots of old names that were still here. Use a common standard for everything. Patch generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-map.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/media/rc-map.h b/include/media/rc-map.h index a6b2738f2d60..5e9c06ad1d47 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -25,13 +25,13 @@ RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ RC_TYPE_RC5_SZ | RC_TYPE_OTHER) -struct ir_scancode { +struct rc_map_table { u32 scancode; u32 keycode; }; struct rc_map { - struct ir_scancode *scan; + struct rc_map_table *scan; unsigned int size; /* Max number of entries */ unsigned int len; /* Used number of entries */ unsigned int alloc; /* Size of *scan in bytes */ -- cgit v1.2.3 From d100e659b61a735c3343b3d82c1c009b04072cdd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Nov 2010 15:56:53 -0300 Subject: [media] rc: use rc_map_ prefix for all rc map tables Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-map.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 5e9c06ad1d47..1a3d51da1864 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -40,16 +40,16 @@ struct rc_map { spinlock_t lock; }; -struct rc_keymap { +struct rc_map_list { struct list_head list; struct rc_map map; }; /* Routines from rc-map.c */ -int ir_register_map(struct rc_keymap *map); -void ir_unregister_map(struct rc_keymap *map); -struct rc_map *get_rc_map(const char *name); +int rc_map_register(struct rc_map_list *map); +void rc_map_unregister(struct rc_map_list *map); +struct rc_map *rc_map_get(const char *name); void rc_map_init(void); /* Names of the several keytables defined in-kernel */ -- cgit v1.2.3 From 829ba9fe34246f1f5e813b6bf84171d36e776734 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= Date: Fri, 19 Nov 2010 20:43:27 -0300 Subject: [media] rc-core: fix some leftovers from the renaming patches MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix some minor comments etc which are leftover from the old naming scheme. Signed-off-by: David Härdeman Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-core.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/media/rc-core.h b/include/media/rc-core.h index affb93feed3b..a23c1fc685a1 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -206,12 +206,12 @@ static inline u32 ir_extract_bits(u32 data, u32 mask) u32 vbit = 1, value = 0; do { - if (mask & 1) { - if (data & 1) - value |= vbit; - vbit <<= 1; - } - data >>= 1; + if (mask & 1) { + if (data & 1) + value |= vbit; + vbit <<= 1; + } + data >>= 1; } while (mask >>= 1); return value; -- cgit v1.2.3 From 0e835087dfe7db19f1f072046f5e116d4ec6662b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 17 Nov 2010 02:13:39 -0300 Subject: [media] lirc_dev: add some __user annotations Sparse complains because there are no __user annotations. drivers/media/rc/lirc_dev.c:156:27: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) drivers/media/rc/lirc_dev.c:156:27: expected int ( *read )( ... ) drivers/media/rc/lirc_dev.c:156:27: got int ( extern [toplevel] * )( ... ) Signed-off-by: Dan Carpenter Acked-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- include/media/lirc_dev.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h index 54780a560d0e..630e702c9511 100644 --- a/include/media/lirc_dev.h +++ b/include/media/lirc_dev.h @@ -217,9 +217,9 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file); int lirc_dev_fop_close(struct inode *inode, struct file *file); unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait); long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length, +ssize_t lirc_dev_fop_read(struct file *file, char __user *buffer, size_t length, loff_t *ppos); -ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length, - loff_t *ppos); +ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer, + size_t length, loff_t *ppos); #endif -- cgit v1.2.3 From eac8ae087ac66b21de94fee3e920210b43d43076 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mariusz=20Bia=C5=82o=C5=84czyk?= Date: Mon, 15 Nov 2010 15:50:13 -0300 Subject: [media] Fix rc-tbs-nec table after converting the cx88 driver to ir-core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The patch fixes the rc-tbs-nec table after converting drivers/media/video/cx88 to ir-core (commit ba7e90c9f878e0ac3c0614a5446fe5c62ccc33ec). It is also adds two missing buttons (10- and 10+) with its definition (KEY_10CHANNELSUP and KEY_10CHANNELSDOWN). [mchehab@redhat.com: move keycode numbers to 0x1b8/0x1b9 as requested by the input Maintainer] Signed-off-by: Mariusz Białończyk Signed-off-by: Mauro Carvalho Chehab --- include/linux/input.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index 9777668883be..f7a6e1966df3 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -590,6 +590,8 @@ struct input_keymap_entry { #define KEY_FRAMEFORWARD 0x1b5 #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ #define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 -- cgit v1.2.3 From 12007419b766b316998499bd07c6586928230729 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 17 Dec 2010 14:39:29 -0300 Subject: [media] Add a keymap for Pixelview 002-T remote Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-map.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 1a3d51da1864..5d3a45748767 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -119,6 +119,7 @@ void rc_map_init(void); #define RC_MAP_PINNACLE_PCTV_HD "rc-pinnacle-pctv-hd" #define RC_MAP_PIXELVIEW_NEW "rc-pixelview-new" #define RC_MAP_PIXELVIEW "rc-pixelview" +#define RC_MAP_PIXELVIEW_002T "rc-pixelview-002t" #define RC_MAP_PIXELVIEW_MK12 "rc-pixelview-mk12" #define RC_MAP_POWERCOLOR_REAL_ANGEL "rc-powercolor-real-angel" #define RC_MAP_PROTEUS_2309 "rc-proteus-2309" -- cgit v1.2.3 From 383268a8e282fb549dabe3a33ccafc9434ab6006 Mon Sep 17 00:00:00 2001 From: Matti Aaltonen Date: Fri, 10 Dec 2010 11:41:33 -0300 Subject: [media] MFD: WL1273 FM Radio: MFD driver for the FM radio This is the core of the WL1273 FM radio driver, it connects the two child modules. The two child drivers are drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c. The radio-wl1273 driver implements the V4L2 interface and communicates with the device. The ALSA codec offers digital audio, without it only analog audio is available. Signed-off-by: Matti J. Aaltonen Acked-by: Samuel Ortiz Signed-off-by: Mauro Carvalho Chehab --- include/linux/mfd/wl1273-core.h | 288 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 include/linux/mfd/wl1273-core.h (limited to 'include') diff --git a/include/linux/mfd/wl1273-core.h b/include/linux/mfd/wl1273-core.h new file mode 100644 index 000000000000..9787293eae5f --- /dev/null +++ b/include/linux/mfd/wl1273-core.h @@ -0,0 +1,288 @@ +/* + * include/linux/mfd/wl1273-core.h + * + * Some definitions for the wl1273 radio receiver/transmitter chip. + * + * Copyright (C) 2010 Nokia Corporation + * Author: Matti J. Aaltonen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef WL1273_CORE_H +#define WL1273_CORE_H + +#include +#include + +#define WL1273_FM_DRIVER_NAME "wl1273-fm" +#define RX71_FM_I2C_ADDR 0x22 + +#define WL1273_STEREO_GET 0 +#define WL1273_RSSI_LVL_GET 1 +#define WL1273_IF_COUNT_GET 2 +#define WL1273_FLAG_GET 3 +#define WL1273_RDS_SYNC_GET 4 +#define WL1273_RDS_DATA_GET 5 +#define WL1273_FREQ_SET 10 +#define WL1273_AF_FREQ_SET 11 +#define WL1273_MOST_MODE_SET 12 +#define WL1273_MOST_BLEND_SET 13 +#define WL1273_DEMPH_MODE_SET 14 +#define WL1273_SEARCH_LVL_SET 15 +#define WL1273_BAND_SET 16 +#define WL1273_MUTE_STATUS_SET 17 +#define WL1273_RDS_PAUSE_LVL_SET 18 +#define WL1273_RDS_PAUSE_DUR_SET 19 +#define WL1273_RDS_MEM_SET 20 +#define WL1273_RDS_BLK_B_SET 21 +#define WL1273_RDS_MSK_B_SET 22 +#define WL1273_RDS_PI_MASK_SET 23 +#define WL1273_RDS_PI_SET 24 +#define WL1273_RDS_SYSTEM_SET 25 +#define WL1273_INT_MASK_SET 26 +#define WL1273_SEARCH_DIR_SET 27 +#define WL1273_VOLUME_SET 28 +#define WL1273_AUDIO_ENABLE 29 +#define WL1273_PCM_MODE_SET 30 +#define WL1273_I2S_MODE_CONFIG_SET 31 +#define WL1273_POWER_SET 32 +#define WL1273_INTX_CONFIG_SET 33 +#define WL1273_PULL_EN_SET 34 +#define WL1273_HILO_SET 35 +#define WL1273_SWITCH2FREF 36 +#define WL1273_FREQ_DRIFT_REPORT 37 + +#define WL1273_PCE_GET 40 +#define WL1273_FIRM_VER_GET 41 +#define WL1273_ASIC_VER_GET 42 +#define WL1273_ASIC_ID_GET 43 +#define WL1273_MAN_ID_GET 44 +#define WL1273_TUNER_MODE_SET 45 +#define WL1273_STOP_SEARCH 46 +#define WL1273_RDS_CNTRL_SET 47 + +#define WL1273_WRITE_HARDWARE_REG 100 +#define WL1273_CODE_DOWNLOAD 101 +#define WL1273_RESET 102 + +#define WL1273_FM_POWER_MODE 254 +#define WL1273_FM_INTERRUPT 255 + +/* Transmitter API */ + +#define WL1273_CHANL_SET 55 +#define WL1273_SCAN_SPACING_SET 56 +#define WL1273_REF_SET 57 +#define WL1273_POWER_ENB_SET 90 +#define WL1273_POWER_ATT_SET 58 +#define WL1273_POWER_LEV_SET 59 +#define WL1273_AUDIO_DEV_SET 60 +#define WL1273_PILOT_DEV_SET 61 +#define WL1273_RDS_DEV_SET 62 +#define WL1273_PUPD_SET 91 +#define WL1273_AUDIO_IO_SET 63 +#define WL1273_PREMPH_SET 64 +#define WL1273_MONO_SET 66 +#define WL1273_MUTE 92 +#define WL1273_MPX_LMT_ENABLE 67 +#define WL1273_PI_SET 93 +#define WL1273_ECC_SET 69 +#define WL1273_PTY 70 +#define WL1273_AF 71 +#define WL1273_DISPLAY_MODE 74 +#define WL1273_RDS_REP_SET 77 +#define WL1273_RDS_CONFIG_DATA_SET 98 +#define WL1273_RDS_DATA_SET 99 +#define WL1273_RDS_DATA_ENB 94 +#define WL1273_TA_SET 78 +#define WL1273_TP_SET 79 +#define WL1273_DI_SET 80 +#define WL1273_MS_SET 81 +#define WL1273_PS_SCROLL_SPEED 82 +#define WL1273_TX_AUDIO_LEVEL_TEST 96 +#define WL1273_TX_AUDIO_LEVEL_TEST_THRESHOLD 73 +#define WL1273_TX_AUDIO_INPUT_LEVEL_RANGE_SET 54 +#define WL1273_RX_ANTENNA_SELECT 87 +#define WL1273_I2C_DEV_ADDR_SET 86 +#define WL1273_REF_ERR_CALIB_PARAM_SET 88 +#define WL1273_REF_ERR_CALIB_PERIODICITY_SET 89 +#define WL1273_SOC_INT_TRIGGER 52 +#define WL1273_SOC_AUDIO_PATH_SET 83 +#define WL1273_SOC_PCMI_OVERRIDE 84 +#define WL1273_SOC_I2S_OVERRIDE 85 +#define WL1273_RSSI_BLOCK_SCAN_FREQ_SET 95 +#define WL1273_RSSI_BLOCK_SCAN_START 97 +#define WL1273_RSSI_BLOCK_SCAN_DATA_GET 5 +#define WL1273_READ_FMANT_TUNE_VALUE 104 + +#define WL1273_RDS_OFF 0 +#define WL1273_RDS_ON 1 +#define WL1273_RDS_RESET 2 + +#define WL1273_AUDIO_DIGITAL 0 +#define WL1273_AUDIO_ANALOG 1 + +#define WL1273_MODE_RX BIT(0) +#define WL1273_MODE_TX BIT(1) +#define WL1273_MODE_OFF BIT(2) +#define WL1273_MODE_SUSPENDED BIT(3) + +#define WL1273_RADIO_CHILD BIT(0) +#define WL1273_CODEC_CHILD BIT(1) + +#define WL1273_RX_MONO 1 +#define WL1273_RX_STEREO 0 +#define WL1273_TX_MONO 0 +#define WL1273_TX_STEREO 1 + +#define WL1273_MAX_VOLUME 0xffff +#define WL1273_DEFAULT_VOLUME 0x78b8 + +/* I2S protocol, left channel first, data width 16 bits */ +#define WL1273_PCM_DEF_MODE 0x00 + +/* Rx */ +#define WL1273_AUDIO_ENABLE_I2S BIT(0) +#define WL1273_AUDIO_ENABLE_ANALOG BIT(1) + +/* Tx */ +#define WL1273_AUDIO_IO_SET_ANALOG 0 +#define WL1273_AUDIO_IO_SET_I2S 1 + +#define WL1273_PUPD_SET_OFF 0x00 +#define WL1273_PUPD_SET_ON 0x01 +#define WL1273_PUPD_SET_RETENTION 0x10 + +/* I2S mode */ +#define WL1273_IS2_WIDTH_32 0x0 +#define WL1273_IS2_WIDTH_40 0x1 +#define WL1273_IS2_WIDTH_22_23 0x2 +#define WL1273_IS2_WIDTH_23_22 0x3 +#define WL1273_IS2_WIDTH_48 0x4 +#define WL1273_IS2_WIDTH_50 0x5 +#define WL1273_IS2_WIDTH_60 0x6 +#define WL1273_IS2_WIDTH_64 0x7 +#define WL1273_IS2_WIDTH_80 0x8 +#define WL1273_IS2_WIDTH_96 0x9 +#define WL1273_IS2_WIDTH_128 0xa +#define WL1273_IS2_WIDTH 0xf + +#define WL1273_IS2_FORMAT_STD (0x0 << 4) +#define WL1273_IS2_FORMAT_LEFT (0x1 << 4) +#define WL1273_IS2_FORMAT_RIGHT (0x2 << 4) +#define WL1273_IS2_FORMAT_USER (0x3 << 4) + +#define WL1273_IS2_MASTER (0x0 << 6) +#define WL1273_IS2_SLAVEW (0x1 << 6) + +#define WL1273_IS2_TRI_AFTER_SENDING (0x0 << 7) +#define WL1273_IS2_TRI_ALWAYS_ACTIVE (0x1 << 7) + +#define WL1273_IS2_SDOWS_RR (0x0 << 8) +#define WL1273_IS2_SDOWS_RF (0x1 << 8) +#define WL1273_IS2_SDOWS_FR (0x2 << 8) +#define WL1273_IS2_SDOWS_FF (0x3 << 8) + +#define WL1273_IS2_TRI_OPT (0x0 << 10) +#define WL1273_IS2_TRI_ALWAYS (0x1 << 10) + +#define WL1273_IS2_RATE_48K (0x0 << 12) +#define WL1273_IS2_RATE_44_1K (0x1 << 12) +#define WL1273_IS2_RATE_32K (0x2 << 12) +#define WL1273_IS2_RATE_22_05K (0x4 << 12) +#define WL1273_IS2_RATE_16K (0x5 << 12) +#define WL1273_IS2_RATE_12K (0x8 << 12) +#define WL1273_IS2_RATE_11_025 (0x9 << 12) +#define WL1273_IS2_RATE_8K (0xa << 12) +#define WL1273_IS2_RATE (0xf << 12) + +#define WL1273_I2S_DEF_MODE (WL1273_IS2_WIDTH_32 | \ + WL1273_IS2_FORMAT_STD | \ + WL1273_IS2_MASTER | \ + WL1273_IS2_TRI_AFTER_SENDING | \ + WL1273_IS2_SDOWS_RR | \ + WL1273_IS2_TRI_OPT | \ + WL1273_IS2_RATE_48K) + +#define SCHAR_MIN (-128) +#define SCHAR_MAX 127 + +#define WL1273_FR_EVENT BIT(0) +#define WL1273_BL_EVENT BIT(1) +#define WL1273_RDS_EVENT BIT(2) +#define WL1273_BBLK_EVENT BIT(3) +#define WL1273_LSYNC_EVENT BIT(4) +#define WL1273_LEV_EVENT BIT(5) +#define WL1273_IFFR_EVENT BIT(6) +#define WL1273_PI_EVENT BIT(7) +#define WL1273_PD_EVENT BIT(8) +#define WL1273_STIC_EVENT BIT(9) +#define WL1273_MAL_EVENT BIT(10) +#define WL1273_POW_ENB_EVENT BIT(11) +#define WL1273_SCAN_OVER_EVENT BIT(12) +#define WL1273_ERROR_EVENT BIT(13) + +#define TUNER_MODE_STOP_SEARCH 0 +#define TUNER_MODE_PRESET 1 +#define TUNER_MODE_AUTO_SEEK 2 +#define TUNER_MODE_AF 3 +#define TUNER_MODE_AUTO_SEEK_PI 4 +#define TUNER_MODE_AUTO_SEEK_BULK 5 + +#define RDS_BLOCK_SIZE 3 + +struct wl1273_fm_platform_data { + int (*request_resources) (struct i2c_client *client); + void (*free_resources) (void); + void (*enable) (void); + void (*disable) (void); + + u8 forbidden_modes; + unsigned int children; +}; + +#define WL1273_FM_CORE_CELLS 2 + +#define WL1273_BAND_OTHER 0 +#define WL1273_BAND_JAPAN 1 + +#define WL1273_BAND_JAPAN_LOW 76000 +#define WL1273_BAND_JAPAN_HIGH 90000 +#define WL1273_BAND_OTHER_LOW 87500 +#define WL1273_BAND_OTHER_HIGH 108000 + +#define WL1273_BAND_TX_LOW 76000 +#define WL1273_BAND_TX_HIGH 108000 + +struct wl1273_core { + struct mfd_cell cells[WL1273_FM_CORE_CELLS]; + struct wl1273_fm_platform_data *pdata; + + unsigned int mode; + unsigned int i2s_mode; + unsigned int volume; + unsigned int audio_mode; + unsigned int channel_number; + struct mutex lock; /* for serializing fm radio operations */ + + struct i2c_client *client; + + int (*write)(struct wl1273_core *core, u8, u16); + int (*set_audio)(struct wl1273_core *core, unsigned int); + int (*set_volume)(struct wl1273_core *core, unsigned int); +}; + +#endif /* ifndef WL1273_CORE_H */ -- cgit v1.2.3 From 08af245de0cf6ab5f4ed008ee2bb99273774fce0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 24 Dec 2010 10:33:19 -0300 Subject: [media] V4L: remove V4L1 compatibility mode Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev.h | 22 ++-------------------- include/media/v4l2-ioctl.h | 22 +++------------------- include/media/videobuf-core.h | 8 -------- 3 files changed, 5 insertions(+), 47 deletions(-) (limited to 'include') diff --git a/include/linux/videodev.h b/include/linux/videodev.h index b19eab140977..8a7aead76a38 100644 --- a/include/linux/videodev.h +++ b/include/linux/videodev.h @@ -16,24 +16,7 @@ #include #include -#if defined(__MIN_V4L1) && defined (__KERNEL__) - -/* - * Used by those V4L2 core functions that need a minimum V4L1 support, - * in order to allow V4L1 Compatibilty code compilation. - */ - -struct video_mbuf -{ - int size; /* Total memory to map */ - int frames; /* Frames */ - int offsets[VIDEO_MAX_FRAME]; -}; - -#define VIDIOCGMBUF _IOR('v',20, struct video_mbuf) /* Memory map buffer info */ - -#else -#if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__) +#if defined(CONFIG_VIDEO_V4L1) || defined(CONFIG_VIDEO_V4L1_MODULE) || !defined(__KERNEL__) #define VID_TYPE_CAPTURE 1 /* Can capture */ #define VID_TYPE_TUNER 2 /* Can tune */ @@ -328,8 +311,7 @@ struct video_code #define VID_PLAY_RESET 13 #define VID_PLAY_END_MARK 14 -#endif /* CONFIG_VIDEO_V4L1_COMPAT */ -#endif /* __MIN_V4L1 */ +#endif /* CONFIG_VIDEO_V4L1 */ #endif /* __LINUX_VIDEODEV_H */ diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 06daa6e8e051..67df37542c68 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -14,12 +14,7 @@ #include #include #include /* need __user */ -#ifdef CONFIG_VIDEO_V4L1_COMPAT -#define __MIN_V4L1 -#include -#else #include -#endif struct v4l2_fh; @@ -113,10 +108,6 @@ struct v4l2_ioctl_ops { int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i); -#ifdef CONFIG_VIDEO_V4L1_COMPAT - /* buffer type is struct vidio_mbuf * */ - int (*vidiocgmbuf) (struct file *file, void *fh, struct video_mbuf *p); -#endif int (*vidioc_g_fbuf) (struct file *file, void *fh, struct v4l2_framebuffer *a); int (*vidioc_s_fbuf) (struct file *file, void *fh, @@ -300,22 +291,15 @@ extern void v4l_printk_ioctl(unsigned int cmd); extern const char *v4l2_field_names[]; extern const char *v4l2_type_names[]; -/* Compatibility layer interface -- v4l1-compat module */ -typedef long (*v4l2_kioctl)(struct file *file, - unsigned int cmd, void *arg); -#ifdef CONFIG_VIDEO_V4L1_COMPAT -long v4l_compat_translate_ioctl(struct file *file, - int cmd, void *arg, v4l2_kioctl driver_ioctl); -#else -#define v4l_compat_translate_ioctl(file, cmd, arg, ioctl) (-EINVAL) -#endif - #ifdef CONFIG_COMPAT /* 32 Bits compatibility layer for 64 bits processors */ extern long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg); #endif +typedef long (*v4l2_kioctl)(struct file *file, + unsigned int cmd, void *arg); + /* Include support for obsoleted stuff */ extern long video_usercopy(struct file *file, unsigned int cmd, unsigned long arg, v4l2_kioctl func); diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index 1d3835fc26be..90ed895e217d 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -17,10 +17,6 @@ #define _VIDEOBUF_CORE_H #include -#ifdef CONFIG_VIDEO_V4L1_COMPAT -#define __MIN_V4L1 -#include -#endif #include #define UNSET (-1U) @@ -212,10 +208,6 @@ int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b); int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b, int nonblocking); -#ifdef CONFIG_VIDEO_V4L1_COMPAT -int videobuf_cgmbuf(struct videobuf_queue *q, - struct video_mbuf *mbuf, int count); -#endif int videobuf_streamon(struct videobuf_queue *q); int videobuf_streamoff(struct videobuf_queue *q); -- cgit v1.2.3 From 58c66df3e38ffb1d59cc5162bb9e07c859288034 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 27 Dec 2010 07:38:48 -0300 Subject: [media] Remove VIDEO_V4L1 Kconfig option There's no sense on keeping VIDEO_V4L1 Kconfig option just because of two deprecated drivers moved to staging scheduled to die on 2.6.39. Reviewed-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/videodev.h b/include/linux/videodev.h index 8a7aead76a38..f11efbef1c05 100644 --- a/include/linux/videodev.h +++ b/include/linux/videodev.h @@ -16,8 +16,6 @@ #include #include -#if defined(CONFIG_VIDEO_V4L1) || defined(CONFIG_VIDEO_V4L1_MODULE) || !defined(__KERNEL__) - #define VID_TYPE_CAPTURE 1 /* Can capture */ #define VID_TYPE_TUNER 2 /* Can tune */ #define VID_TYPE_TELETEXT 4 /* Does teletext */ @@ -311,8 +309,6 @@ struct video_code #define VID_PLAY_RESET 13 #define VID_PLAY_END_MARK 14 -#endif /* CONFIG_VIDEO_V4L1 */ - #endif /* __LINUX_VIDEODEV_H */ /* -- cgit v1.2.3 From 88ae7624a6fe890e5a8ca57b25420f66e1389f8b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 27 Dec 2010 07:47:54 -0300 Subject: [media] V4L1 removal: Remove linux/videodev.h There's no sense on keeping it on 2.6.38, as nobody is using it anymore, at the kernel tree, and installing it at the userspace API. As two deprecated drivers still need it, move it to their internal directories. Reviewed-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/Kbuild | 1 - include/linux/videodev.h | 318 ---------------------------------------------- include/media/ovcamchip.h | 90 ------------- 3 files changed, 409 deletions(-) delete mode 100644 include/linux/videodev.h delete mode 100644 include/media/ovcamchip.h (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 97319a8fc1e0..a354c199ab98 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -367,7 +367,6 @@ header-y += utime.h header-y += utsname.h header-y += veth.h header-y += vhost.h -header-y += videodev.h header-y += videodev2.h header-y += virtio_9p.h header-y += virtio_balloon.h diff --git a/include/linux/videodev.h b/include/linux/videodev.h deleted file mode 100644 index f11efbef1c05..000000000000 --- a/include/linux/videodev.h +++ /dev/null @@ -1,318 +0,0 @@ -/* - * Video for Linux version 1 - OBSOLETE - * - * Header file for v4l1 drivers and applications, for - * Linux kernels 2.2.x or 2.4.x. - * - * Provides header for legacy drivers and applications - * - * See http://linuxtv.org for more info - * - */ -#ifndef __LINUX_VIDEODEV_H -#define __LINUX_VIDEODEV_H - -#include -#include -#include - -#define VID_TYPE_CAPTURE 1 /* Can capture */ -#define VID_TYPE_TUNER 2 /* Can tune */ -#define VID_TYPE_TELETEXT 4 /* Does teletext */ -#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */ -#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */ -#define VID_TYPE_CLIPPING 32 /* Can clip */ -#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ -#define VID_TYPE_SCALES 128 /* Scalable */ -#define VID_TYPE_MONOCHROME 256 /* Monochrome only */ -#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ -#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */ -#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */ -#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */ -#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */ - -struct video_capability -{ - char name[32]; - int type; - int channels; /* Num channels */ - int audios; /* Num audio devices */ - int maxwidth; /* Supported width */ - int maxheight; /* And height */ - int minwidth; /* Supported width */ - int minheight; /* And height */ -}; - - -struct video_channel -{ - int channel; - char name[32]; - int tuners; - __u32 flags; -#define VIDEO_VC_TUNER 1 /* Channel has a tuner */ -#define VIDEO_VC_AUDIO 2 /* Channel has audio */ - __u16 type; -#define VIDEO_TYPE_TV 1 -#define VIDEO_TYPE_CAMERA 2 - __u16 norm; /* Norm set by channel */ -}; - -struct video_tuner -{ - int tuner; - char name[32]; - unsigned long rangelow, rangehigh; /* Tuner range */ - __u32 flags; -#define VIDEO_TUNER_PAL 1 -#define VIDEO_TUNER_NTSC 2 -#define VIDEO_TUNER_SECAM 4 -#define VIDEO_TUNER_LOW 8 /* Uses KHz not MHz */ -#define VIDEO_TUNER_NORM 16 /* Tuner can set norm */ -#define VIDEO_TUNER_STEREO_ON 128 /* Tuner is seeing stereo */ -#define VIDEO_TUNER_RDS_ON 256 /* Tuner is seeing an RDS datastream */ -#define VIDEO_TUNER_MBS_ON 512 /* Tuner is seeing an MBS datastream */ - __u16 mode; /* PAL/NTSC/SECAM/OTHER */ -#define VIDEO_MODE_PAL 0 -#define VIDEO_MODE_NTSC 1 -#define VIDEO_MODE_SECAM 2 -#define VIDEO_MODE_AUTO 3 - __u16 signal; /* Signal strength 16bit scale */ -}; - -struct video_picture -{ - __u16 brightness; - __u16 hue; - __u16 colour; - __u16 contrast; - __u16 whiteness; /* Black and white only */ - __u16 depth; /* Capture depth */ - __u16 palette; /* Palette in use */ -#define VIDEO_PALETTE_GREY 1 /* Linear greyscale */ -#define VIDEO_PALETTE_HI240 2 /* High 240 cube (BT848) */ -#define VIDEO_PALETTE_RGB565 3 /* 565 16 bit RGB */ -#define VIDEO_PALETTE_RGB24 4 /* 24bit RGB */ -#define VIDEO_PALETTE_RGB32 5 /* 32bit RGB */ -#define VIDEO_PALETTE_RGB555 6 /* 555 15bit RGB */ -#define VIDEO_PALETTE_YUV422 7 /* YUV422 capture */ -#define VIDEO_PALETTE_YUYV 8 -#define VIDEO_PALETTE_UYVY 9 /* The great thing about standards is ... */ -#define VIDEO_PALETTE_YUV420 10 -#define VIDEO_PALETTE_YUV411 11 /* YUV411 capture */ -#define VIDEO_PALETTE_RAW 12 /* RAW capture (BT848) */ -#define VIDEO_PALETTE_YUV422P 13 /* YUV 4:2:2 Planar */ -#define VIDEO_PALETTE_YUV411P 14 /* YUV 4:1:1 Planar */ -#define VIDEO_PALETTE_YUV420P 15 /* YUV 4:2:0 Planar */ -#define VIDEO_PALETTE_YUV410P 16 /* YUV 4:1:0 Planar */ -#define VIDEO_PALETTE_PLANAR 13 /* start of planar entries */ -#define VIDEO_PALETTE_COMPONENT 7 /* start of component entries */ -}; - -struct video_audio -{ - int audio; /* Audio channel */ - __u16 volume; /* If settable */ - __u16 bass, treble; - __u32 flags; -#define VIDEO_AUDIO_MUTE 1 -#define VIDEO_AUDIO_MUTABLE 2 -#define VIDEO_AUDIO_VOLUME 4 -#define VIDEO_AUDIO_BASS 8 -#define VIDEO_AUDIO_TREBLE 16 -#define VIDEO_AUDIO_BALANCE 32 - char name[16]; -#define VIDEO_SOUND_MONO 1 -#define VIDEO_SOUND_STEREO 2 -#define VIDEO_SOUND_LANG1 4 -#define VIDEO_SOUND_LANG2 8 - __u16 mode; - __u16 balance; /* Stereo balance */ - __u16 step; /* Step actual volume uses */ -}; - -struct video_clip -{ - __s32 x,y; - __s32 width, height; - struct video_clip *next; /* For user use/driver use only */ -}; - -struct video_window -{ - __u32 x,y; /* Position of window */ - __u32 width,height; /* Its size */ - __u32 chromakey; - __u32 flags; - struct video_clip __user *clips; /* Set only */ - int clipcount; -#define VIDEO_WINDOW_INTERLACE 1 -#define VIDEO_WINDOW_CHROMAKEY 16 /* Overlay by chromakey */ -#define VIDEO_CLIP_BITMAP -1 -/* bitmap is 1024x625, a '1' bit represents a clipped pixel */ -#define VIDEO_CLIPMAP_SIZE (128 * 625) -}; - -struct video_capture -{ - __u32 x,y; /* Offsets into image */ - __u32 width, height; /* Area to capture */ - __u16 decimation; /* Decimation divider */ - __u16 flags; /* Flags for capture */ -#define VIDEO_CAPTURE_ODD 0 /* Temporal */ -#define VIDEO_CAPTURE_EVEN 1 -}; - -struct video_buffer -{ - void *base; - int height,width; - int depth; - int bytesperline; -}; - -struct video_mmap -{ - unsigned int frame; /* Frame (0 - n) for double buffer */ - int height,width; - unsigned int format; /* should be VIDEO_PALETTE_* */ -}; - -struct video_key -{ - __u8 key[8]; - __u32 flags; -}; - -struct video_mbuf -{ - int size; /* Total memory to map */ - int frames; /* Frames */ - int offsets[VIDEO_MAX_FRAME]; -}; - -#define VIDEO_NO_UNIT (-1) - -struct video_unit -{ - int video; /* Video minor */ - int vbi; /* VBI minor */ - int radio; /* Radio minor */ - int audio; /* Audio minor */ - int teletext; /* Teletext minor */ -}; - -struct vbi_format { - __u32 sampling_rate; /* in Hz */ - __u32 samples_per_line; - __u32 sample_format; /* VIDEO_PALETTE_RAW only (1 byte) */ - __s32 start[2]; /* starting line for each frame */ - __u32 count[2]; /* count of lines for each frame */ - __u32 flags; -#define VBI_UNSYNC 1 /* can distingues between top/bottom field */ -#define VBI_INTERLACED 2 /* lines are interlaced */ -}; - -/* video_info is biased towards hardware mpeg encode/decode */ -/* but it could apply generically to any hardware compressor/decompressor */ -struct video_info -{ - __u32 frame_count; /* frames output since decode/encode began */ - __u32 h_size; /* current unscaled horizontal size */ - __u32 v_size; /* current unscaled veritcal size */ - __u32 smpte_timecode; /* current SMPTE timecode (for current GOP) */ - __u32 picture_type; /* current picture type */ - __u32 temporal_reference; /* current temporal reference */ - __u8 user_data[256]; /* user data last found in compressed stream */ - /* user_data[0] contains user data flags, user_data[1] has count */ -}; - -/* generic structure for setting playback modes */ -struct video_play_mode -{ - int mode; - int p1; - int p2; -}; - -/* for loading microcode / fpga programming */ -struct video_code -{ - char loadwhat[16]; /* name or tag of file being passed */ - int datasize; - __u8 *data; -}; - -#define VIDIOCGCAP _IOR('v',1,struct video_capability) /* Get capabilities */ -#define VIDIOCGCHAN _IOWR('v',2,struct video_channel) /* Get channel info (sources) */ -#define VIDIOCSCHAN _IOW('v',3,struct video_channel) /* Set channel */ -#define VIDIOCGTUNER _IOWR('v',4,struct video_tuner) /* Get tuner abilities */ -#define VIDIOCSTUNER _IOW('v',5,struct video_tuner) /* Tune the tuner for the current channel */ -#define VIDIOCGPICT _IOR('v',6,struct video_picture) /* Get picture properties */ -#define VIDIOCSPICT _IOW('v',7,struct video_picture) /* Set picture properties */ -#define VIDIOCCAPTURE _IOW('v',8,int) /* Start, end capture */ -#define VIDIOCGWIN _IOR('v',9, struct video_window) /* Get the video overlay window */ -#define VIDIOCSWIN _IOW('v',10, struct video_window) /* Set the video overlay window - passes clip list for hardware smarts , chromakey etc */ -#define VIDIOCGFBUF _IOR('v',11, struct video_buffer) /* Get frame buffer */ -#define VIDIOCSFBUF _IOW('v',12, struct video_buffer) /* Set frame buffer - root only */ -#define VIDIOCKEY _IOR('v',13, struct video_key) /* Video key event - to dev 255 is to all - cuts capture on all DMA windows with this key (0xFFFFFFFF == all) */ -#define VIDIOCGFREQ _IOR('v',14, unsigned long) /* Set tuner */ -#define VIDIOCSFREQ _IOW('v',15, unsigned long) /* Set tuner */ -#define VIDIOCGAUDIO _IOR('v',16, struct video_audio) /* Get audio info */ -#define VIDIOCSAUDIO _IOW('v',17, struct video_audio) /* Audio source, mute etc */ -#define VIDIOCSYNC _IOW('v',18, int) /* Sync with mmap grabbing */ -#define VIDIOCMCAPTURE _IOW('v',19, struct video_mmap) /* Grab frames */ -#define VIDIOCGMBUF _IOR('v',20, struct video_mbuf) /* Memory map buffer info */ -#define VIDIOCGUNIT _IOR('v',21, struct video_unit) /* Get attached units */ -#define VIDIOCGCAPTURE _IOR('v',22, struct video_capture) /* Get subcapture */ -#define VIDIOCSCAPTURE _IOW('v',23, struct video_capture) /* Set subcapture */ -#define VIDIOCSPLAYMODE _IOW('v',24, struct video_play_mode) /* Set output video mode/feature */ -#define VIDIOCSWRITEMODE _IOW('v',25, int) /* Set write mode */ -#define VIDIOCGPLAYINFO _IOR('v',26, struct video_info) /* Get current playback info from hardware */ -#define VIDIOCSMICROCODE _IOW('v',27, struct video_code) /* Load microcode into hardware */ -#define VIDIOCGVBIFMT _IOR('v',28, struct vbi_format) /* Get VBI information */ -#define VIDIOCSVBIFMT _IOW('v',29, struct vbi_format) /* Set VBI information */ - - -#define BASE_VIDIOCPRIVATE 192 /* 192-255 are private */ - -/* VIDIOCSWRITEMODE */ -#define VID_WRITE_MPEG_AUD 0 -#define VID_WRITE_MPEG_VID 1 -#define VID_WRITE_OSD 2 -#define VID_WRITE_TTX 3 -#define VID_WRITE_CC 4 -#define VID_WRITE_MJPEG 5 - -/* VIDIOCSPLAYMODE */ -#define VID_PLAY_VID_OUT_MODE 0 - /* p1: = VIDEO_MODE_PAL, VIDEO_MODE_NTSC, etc ... */ -#define VID_PLAY_GENLOCK 1 - /* p1: 0 = OFF, 1 = ON */ - /* p2: GENLOCK FINE DELAY value */ -#define VID_PLAY_NORMAL 2 -#define VID_PLAY_PAUSE 3 -#define VID_PLAY_SINGLE_FRAME 4 -#define VID_PLAY_FAST_FORWARD 5 -#define VID_PLAY_SLOW_MOTION 6 -#define VID_PLAY_IMMEDIATE_NORMAL 7 -#define VID_PLAY_SWITCH_CHANNELS 8 -#define VID_PLAY_FREEZE_FRAME 9 -#define VID_PLAY_STILL_MODE 10 -#define VID_PLAY_MASTER_MODE 11 - /* p1: see below */ -#define VID_PLAY_MASTER_NONE 1 -#define VID_PLAY_MASTER_VIDEO 2 -#define VID_PLAY_MASTER_AUDIO 3 -#define VID_PLAY_ACTIVE_SCANLINES 12 - /* p1 = first active; p2 = last active */ -#define VID_PLAY_RESET 13 -#define VID_PLAY_END_MARK 14 - -#endif /* __LINUX_VIDEODEV_H */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h deleted file mode 100644 index 05b9569ef1c8..000000000000 --- a/include/media/ovcamchip.h +++ /dev/null @@ -1,90 +0,0 @@ -/* OmniVision* camera chip driver API - * - * Copyright (c) 1999-2004 Mark McClelland - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - * - * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver - * is not sponsored or developed by them. - */ - -#ifndef __LINUX_OVCAMCHIP_H -#define __LINUX_OVCAMCHIP_H - -#include -#include - -/* --------------------------------- */ -/* ENUMERATIONS */ -/* --------------------------------- */ - -/* Controls */ -enum { - OVCAMCHIP_CID_CONT, /* Contrast */ - OVCAMCHIP_CID_BRIGHT, /* Brightness */ - OVCAMCHIP_CID_SAT, /* Saturation */ - OVCAMCHIP_CID_HUE, /* Hue */ - OVCAMCHIP_CID_EXP, /* Exposure */ - OVCAMCHIP_CID_FREQ, /* Light frequency */ - OVCAMCHIP_CID_BANDFILT, /* Banding filter */ - OVCAMCHIP_CID_AUTOBRIGHT, /* Auto brightness */ - OVCAMCHIP_CID_AUTOEXP, /* Auto exposure */ - OVCAMCHIP_CID_BACKLIGHT, /* Back light compensation */ - OVCAMCHIP_CID_MIRROR, /* Mirror horizontally */ -}; - -/* Chip types */ -#define NUM_CC_TYPES 9 -enum { - CC_UNKNOWN, - CC_OV76BE, - CC_OV7610, - CC_OV7620, - CC_OV7620AE, - CC_OV6620, - CC_OV6630, - CC_OV6630AE, - CC_OV6630AF, -}; - -/* --------------------------------- */ -/* I2C ADDRESSES */ -/* --------------------------------- */ - -#define OV7xx0_SID (0x42 >> 1) -#define OV6xx0_SID (0xC0 >> 1) - -/* --------------------------------- */ -/* API */ -/* --------------------------------- */ - -struct ovcamchip_control { - __u32 id; - __s32 value; -}; - -struct ovcamchip_window { - int x; - int y; - int width; - int height; - int format; - int quarter; /* Scale width and height down 2x */ - - /* This stuff will be removed eventually */ - int clockdiv; /* Clock divisor setting */ -}; - -/* Commands */ -#define OVCAMCHIP_CMD_Q_SUBTYPE _IOR (0x88, 0x00, int) -#define OVCAMCHIP_CMD_INITIALIZE _IOW (0x88, 0x01, int) -/* You must call OVCAMCHIP_CMD_INITIALIZE before any of commands below! */ -#define OVCAMCHIP_CMD_S_CTRL _IOW (0x88, 0x02, struct ovcamchip_control) -#define OVCAMCHIP_CMD_G_CTRL _IOWR (0x88, 0x03, struct ovcamchip_control) -#define OVCAMCHIP_CMD_S_MODE _IOW (0x88, 0x04, struct ovcamchip_window) -#define OVCAMCHIP_MAX_CMD _IO (0x88, 0x3f) - -#endif -- cgit v1.2.3 From b7a0f2e793a52b306e682a0e2e9a0b6f0f0a730e Mon Sep 17 00:00:00 2001 From: Ramiro Morales Date: Sun, 26 Dec 2010 18:13:30 -0300 Subject: [media] saa7134: Add support for Compro VideoMate Vista M1F Signed-off-by: Pavel Osnova Signed-off-by: Ramiro Morales Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-map.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 5d3a45748767..ee9e2f747c76 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -138,6 +138,7 @@ void rc_map_init(void); #define RC_MAP_TREKSTOR "rc-trekstor" #define RC_MAP_TT_1500 "rc-tt-1500" #define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027" +#define RC_MAP_VIDEOMATE_M1F "rc-videomate-m1f" #define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350" #define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr" #define RC_MAP_WINFAST "rc-winfast" -- cgit v1.2.3 From b9218f2f15cdff8991ba041993bf40962c49fdd0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 27 Dec 2010 12:22:46 -0300 Subject: [media] saa6588: rename rds.h to saa6588.h The naming of the media/rds.h header suggested that it was a generic RDS header, when in fact it is just a saa6588 module API that is internal to the kernel. Rename the header and the struct and defines in it to make this clear. Also removed the header include in radio-si470x.h (not used anymore) and from ioctl-number.txt (it's internal to the kernel and never called from userspace). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/rds.h | 44 -------------------------------------------- include/media/saa6588.h | 42 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 44 deletions(-) delete mode 100644 include/media/rds.h create mode 100644 include/media/saa6588.h (limited to 'include') diff --git a/include/media/rds.h b/include/media/rds.h deleted file mode 100644 index a89426667618..000000000000 --- a/include/media/rds.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - - Types and defines needed for RDS. This is included by - saa6588.c and every driver (e.g. bttv-driver.c) that wants - to use the saa6588 module. - - Instead of having a separate rds.h, I'd prefer to include - this stuff in one of the already existing files like tuner.h - - (c) 2005 by Hans J. Koch - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -#ifndef _RDS_H -#define _RDS_H - -struct rds_command { - unsigned int block_count; - int result; - unsigned char __user *buffer; - struct file *instance; - poll_table *event_list; -}; - -#define RDS_CMD_OPEN _IOW('R',1,int) -#define RDS_CMD_CLOSE _IOW('R',2,int) -#define RDS_CMD_READ _IOR('R',3,int) -#define RDS_CMD_POLL _IOR('R',4,int) - -#endif diff --git a/include/media/saa6588.h b/include/media/saa6588.h new file mode 100644 index 000000000000..2c3c4420a4eb --- /dev/null +++ b/include/media/saa6588.h @@ -0,0 +1,42 @@ +/* + + Types and defines needed for RDS. This is included by + saa6588.c and every driver (e.g. bttv-driver.c) that wants + to use the saa6588 module. + + (c) 2005 by Hans J. Koch + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef _SAA6588_H +#define _SAA6588_H + +struct saa6588_command { + unsigned int block_count; + int result; + unsigned char __user *buffer; + struct file *instance; + poll_table *event_list; +}; + +/* These ioctls are internal to the kernel */ +#define SAA6588_CMD_OPEN _IOW('R', 1, int) +#define SAA6588_CMD_CLOSE _IOW('R', 2, int) +#define SAA6588_CMD_READ _IOR('R', 3, int) +#define SAA6588_CMD_POLL _IOR('R', 4, int) + +#endif -- cgit v1.2.3 From 66832aef0694807f487a8ccc8871cea4e80d78c5 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 27 Dec 2010 12:27:50 -0300 Subject: [media] bt819: the ioctls in the header are internal to the kernel Remove bt819.h from ioctl-number.txt and make a note in the header that these ioctls are for internal use only. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/bt819.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/media/bt819.h b/include/media/bt819.h index 38f666bde77a..8025f4bc2bb6 100644 --- a/include/media/bt819.h +++ b/include/media/bt819.h @@ -26,7 +26,10 @@ /* v4l2_device notifications. */ /* Needed to reset the FIFO buffer when changing the input - or the video standard. */ + or the video standard. + + Note: these ioctls that internal to the kernel and are never called + from userspace. */ #define BT819_FIFO_RESET_LOW _IO('b', 0) #define BT819_FIFO_RESET_HIGH _IO('b', 1) -- cgit v1.2.3 From 9706a36e35c4ce04f28a62cfe1205b4e3b0dd13c Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Thu, 18 Nov 2010 15:54:59 -0800 Subject: of/flattree: Add non-boottime device tree functions In preparation for providing run-time handling of device trees, factor out some of the basic functions so that they take an arbitrary blob, rather than relying on the single boot-time tree. V2: - functions have of_fdt_* names - removed find_flat_dt_string - blob argument is first Signed-off-by: Stephen Neuendorffer Signed-off-by: Grant Likely --- include/linux/of_fdt.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index 7bbf5b328438..70c5b736f0a3 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -58,6 +58,17 @@ struct boot_param_header { }; #if defined(CONFIG_OF_FLATTREE) + +/* For scanning an arbitrary device-tree at any time */ +extern char *of_fdt_get_string(struct boot_param_header *blob, u32 offset); +extern void *of_fdt_get_property(struct boot_param_header *blob, + unsigned long node, + const char *name, + unsigned long *size); +extern int of_fdt_is_compatible(struct boot_param_header *blob, + unsigned long node, + const char *compat); + /* TBD: Temporary export of fdt globals - remove when code fully merged */ extern int __initdata dt_root_addr_cells; extern int __initdata dt_root_size_cells; -- cgit v1.2.3 From fe14042358fac0673d4b6362a73796fd64379938 Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Thu, 18 Nov 2010 15:55:02 -0800 Subject: of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree unflatten_device_tree has two dependencies on things that happen during boot time. Firstly, it references the initial device tree directly. Secondly, it allocates memory using the early boot allocator. This patch factors out these dependencies and uses the new __unflatten_device_tree function to implement a driver-visible fdt_unflatten_tree function, which can be used to unflatten a blob after boot time. V2: - remove extra __va() call - make dt_alloc functions return void *. This doesn't fix the general strangeness in this code that constantly casts back and forth between unsigned long and __be32 * Signed-off-by: Stephen Neuendorffer Signed-off-by: Grant Likely --- include/linux/of_fdt.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index 70c5b736f0a3..9ce5dfd2186a 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -68,6 +68,8 @@ extern void *of_fdt_get_property(struct boot_param_header *blob, extern int of_fdt_is_compatible(struct boot_param_header *blob, unsigned long node, const char *compat); +extern void of_fdt_unflatten_tree(unsigned long *blob, + struct device_node **mynodes); /* TBD: Temporary export of fdt globals - remove when code fully merged */ extern int __initdata dt_root_addr_cells; -- cgit v1.2.3 From 513521eaee4375a1a0da0b73c7131a165a9fe4d9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 Dec 2010 14:25:52 -0300 Subject: [media] v4l2-ctrls: use const char * const * for the menu arrays This prevents checkpatch warnings generated when defining 'static const char *foo[]' arrays. It makes sense to use const char * const * anyway since the pointers in the array are indeed const. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/cx2341x.h | 2 +- include/media/v4l2-common.h | 6 +++--- include/media/v4l2-ctrls.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h index 8d08ebfe20b7..9635eebaab09 100644 --- a/include/media/cx2341x.h +++ b/include/media/cx2341x.h @@ -95,7 +95,7 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func, const struct cx2341x_mpeg_params *new); int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, struct v4l2_queryctrl *qctrl); -const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id); +const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id); int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy, struct v4l2_ext_controls *ctrls, unsigned int cmd); void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p); diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 239125af3ea3..2d65b35cdab2 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -98,12 +98,12 @@ int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local); /* Control helper functions */ int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl, - const char **menu_items); + const char * const *menu_items); const char *v4l2_ctrl_get_name(u32 id); -const char **v4l2_ctrl_get_menu(u32 id); +const char * const *v4l2_ctrl_get_menu(u32 id); int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def); int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, - struct v4l2_queryctrl *qctrl, const char **menu_items); + struct v4l2_queryctrl *qctrl, const char * const *menu_items); #define V4L2_CTRL_MENU_IDS_END (0xffffffff) int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids); diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index 9b7bea928a88..d69ab4aae032 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -112,7 +112,7 @@ struct v4l2_ctrl { u32 step; u32 menu_skip_mask; }; - const char **qmenu; + const char * const *qmenu; unsigned long flags; union { s32 val; @@ -202,7 +202,7 @@ struct v4l2_ctrl_config { s32 def; u32 flags; u32 menu_skip_mask; - const char **qmenu; + const char * const *qmenu; unsigned int is_private:1; unsigned int is_volatile:1; }; -- cgit v1.2.3 From 3153ac9c6208892ee237caccdbe2290f8247e236 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Thu, 2 Dec 2010 11:53:28 -0300 Subject: [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor Signed-off-by: Alberto Panizzo Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-chip-ident.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 51e89f2267b8..44fe44ec9ea7 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -74,6 +74,7 @@ enum { V4L2_IDENT_SOI968 = 256, V4L2_IDENT_OV9640 = 257, V4L2_IDENT_OV6650 = 258, + V4L2_IDENT_OV2640 = 259, /* module saa7146: reserved range 300-309 */ V4L2_IDENT_SAA7146 = 300, -- cgit v1.2.3 From 96e442c1b2ef2ba9476e5da2607ba666ce09664d Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Thu, 2 Dec 2010 07:43:37 -0300 Subject: [media] soc_camera: Add the ability to bind regulators to soc_camedra devices In certain machines, camera devices are supplied directly by a number of regulators. This patch add the ability to drive these regulators directly by the soc_camera driver. Signed-off-by: Alberto Panizzo Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- include/media/soc_camera.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 86e3631764ef..9386db829fb7 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -97,6 +97,7 @@ struct soc_camera_host_ops { #define SOCAM_SENSOR_INVERT_DATA (1 << 4) struct i2c_board_info; +struct regulator_bulk_data; struct soc_camera_link { /* Camera bus id, used to match a camera and a bus */ @@ -108,6 +109,10 @@ struct soc_camera_link { const char *module_name; void *priv; + /* Optional regulators that have to be managed on power on/off events */ + struct regulator_bulk_data *regulators; + int num_regulators; + /* * For non-I2C devices platform platform has to provide methods to * add a device to the system and to remove -- cgit v1.2.3 From df4da5cdfca05b37b366b9c69925b68586969c1c Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 31 Dec 2010 02:22:18 -0600 Subject: [SCSI] libiscsi: add more informative failure message during iscsi scsi eh This adds a more informative error code and message for the iscsi scsi eh session drop paths. This allows you to distinguish if the session was dropped due to a connection failure vs the iscsi layer dropping the session due to scsi eh failure processing. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/iscsi_if.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index a8631acd37c3..c3e1cbcc2ad2 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -263,6 +263,7 @@ enum iscsi_err { ISCSI_ERR_INVALID_HOST = ISCSI_ERR_BASE + 18, ISCSI_ERR_XMIT_FAILED = ISCSI_ERR_BASE + 19, ISCSI_ERR_TCP_CONN_CLOSE = ISCSI_ERR_BASE + 20, + ISCSI_ERR_SCSI_EH_SESSION_RST = ISCSI_ERR_BASE + 21, }; /* -- cgit v1.2.3 From f41d472179a0d7c8e8160c85180ab1124947068e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 31 Dec 2010 02:22:21 -0600 Subject: [SCSI] libiscsi: do not take host lock in queuecommand iscsi_tcp, ib_iser, cxgb*, be2iscsi and bnx2i do not use the host lock and do not take the session lock against a irq, so this patch drops the DEF_SCSI_QCMD use. Instead we just take the session lock and disable bhs. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/libiscsi.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 68e951d79f0b..748382b32b52 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -89,6 +89,7 @@ enum { ISCSI_TASK_RUNNING, ISCSI_TASK_ABRT_TMF, /* aborted due to TMF */ ISCSI_TASK_ABRT_SESS_RECOV, /* aborted due to session recovery */ + ISCSI_TASK_REQUEUE_SCSIQ, /* qcmd requeueing to scsi-ml */ }; struct iscsi_r2t_info { @@ -341,7 +342,7 @@ extern int iscsi_eh_abort(struct scsi_cmnd *sc); extern int iscsi_eh_recover_target(struct scsi_cmnd *sc); extern int iscsi_eh_session_reset(struct scsi_cmnd *sc); extern int iscsi_eh_device_reset(struct scsi_cmnd *sc); -extern int iscsi_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *sc); +extern int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc); /* * iSCSI host helpers. -- cgit v1.2.3 From a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 30 Oct 2010 11:49:09 -0400 Subject: of/flattree: Add of_flat_dt_match() helper function This patch adds of_flat_dt_match() which tests a node for compatibility with a list of values and converts the relevant powerpc platform code to use it. This approach simplifies the board support code a bit. Signed-off-by: Grant Likely Reviewed-by: Stephen Neuendorffer --- include/linux/of_fdt.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index 9ce5dfd2186a..ee96091f7d25 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -68,6 +68,8 @@ extern void *of_fdt_get_property(struct boot_param_header *blob, extern int of_fdt_is_compatible(struct boot_param_header *blob, unsigned long node, const char *compat); +extern int of_fdt_match(struct boot_param_header *blob, unsigned long node, + const char **compat); extern void of_fdt_unflatten_tree(unsigned long *blob, struct device_node **mynodes); @@ -84,6 +86,7 @@ extern int of_scan_flat_dt(int (*it)(unsigned long node, const char *uname, extern void *of_get_flat_dt_prop(unsigned long node, const char *name, unsigned long *size); extern int of_flat_dt_is_compatible(unsigned long node, const char *name); +extern int of_flat_dt_match(unsigned long node, const char **matches); extern unsigned long of_get_flat_dt_root(void); extern int early_init_dt_scan_chosen(unsigned long node, const char *uname, -- cgit v1.2.3 From 410cf2bd3dc6ec1ed9e1b36b25b9d7aa927ed14e Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 13 Dec 2010 14:56:02 +0100 Subject: firewire: use split transaction timeout only for split transactions Instead of starting the split transaction timeout timer when any request is submitted, start it only when the destination's ACK_PENDING has been received. This prevents us from using a timeout that is too short, and, if the controller's AT queue is emptying very slowly, from cancelling a packet that has not yet been sent. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter --- include/linux/firewire.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 1cd637ef62d2..9a3f5f9383f6 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -302,9 +302,9 @@ struct fw_packet { struct fw_transaction { int node_id; /* The generation is implied; it is always the current. */ int tlabel; - int timestamp; struct list_head link; struct fw_card *card; + bool is_split_transaction; struct timer_list split_timeout_timer; struct fw_packet packet; -- cgit v1.2.3 From b27dcfb0670ea7352a67137f4ff7947c2a9f6892 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 17 Nov 2010 22:56:48 -0500 Subject: [libata] avoid needlessly passing around ptr to SCSI completion func It's stored in struct scsi_cmnd->scsi_done, making several 'done' parameters to functions redundant. Signed-off-by: Jeff Garzik --- include/linux/libata.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index d947b1231662..c9c5d7ad1a2b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -996,8 +996,7 @@ extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); -extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), - struct ata_port *ap); +extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap); extern int sata_scr_valid(struct ata_link *link); extern int sata_scr_read(struct ata_link *link, int reg, u32 *val); extern int sata_scr_write(struct ata_link *link, int reg, u32 val); @@ -1040,8 +1039,7 @@ extern unsigned int ata_do_dev_read_id(struct ata_device *dev, struct ata_taskfile *tf, u16 *id); extern void ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active); -extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)); +extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd); extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]); -- cgit v1.2.3 From ccd35fb9f4da856b105ea0f1e0cab3702e8ae6ba Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:17 +1100 Subject: kernel: kmem_ptr_validate considered harmful This is a nasty and error prone API. It is no longer used, remove it. Signed-off-by: Nick Piggin --- include/linux/slab.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/slab.h b/include/linux/slab.h index 59260e21bdf5..fa9086647eb7 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -106,8 +106,6 @@ int kmem_cache_shrink(struct kmem_cache *); void kmem_cache_free(struct kmem_cache *, void *); unsigned int kmem_cache_size(struct kmem_cache *); const char *kmem_cache_name(struct kmem_cache *); -int kern_ptr_validate(const void *ptr, unsigned long size); -int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr); /* * Please use this macro to create slab caches. Simply specify the -- cgit v1.2.3 From 5eef7fa905c814826f518aca2d414ca77508ce30 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:22 +1100 Subject: fs: dcache documentation cleanup Remove redundant (and incorrect, since dcache RCU lookup) dentry locking documentation and point to the canonical document. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 6a4aea30aa09..fff975576b5b 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -141,22 +141,16 @@ struct dentry_operations { char *(*d_dname)(struct dentry *, char *, int); }; -/* the dentry parameter passed to d_hash and d_compare is the parent +/* + * Locking rules for dentry_operations callbacks are to be found in + * Documentation/filesystems/Locking. Keep it updated! + * + * the dentry parameter passed to d_hash and d_compare is the parent * directory of the entries to be compared. It is used in case these * functions need any directory specific information for determining * equivalency classes. Using the dentry itself might not work, as it * might be a negative dentry which has no information associated with - * it */ - -/* -locking rules: - big lock dcache_lock d_lock may block -d_revalidate: no no no yes -d_hash no no no yes -d_compare: no yes yes no -d_delete: no yes no no -d_release: no no no yes -d_iput: no no no yes + * it. */ /* d_flags entries */ -- cgit v1.2.3 From fe15ce446beb3a33583af81ffe6c9d01a75314ed Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:23 +1100 Subject: fs: change d_delete semantics Change d_delete from a dentry deletion notification to a dentry caching advise, more like ->drop_inode. Require it to be constant and idempotent, and not take d_lock. This is how all existing filesystems use the callback anyway. This makes fine grained dentry locking of dput and dentry lru scanning much simpler. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index fff975576b5b..cbfc9567e4e9 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -133,9 +133,9 @@ enum dentry_d_lock_class struct dentry_operations { int (*d_revalidate)(struct dentry *, struct nameidata *); - int (*d_hash) (struct dentry *, struct qstr *); - int (*d_compare) (struct dentry *, struct qstr *, struct qstr *); - int (*d_delete)(struct dentry *); + int (*d_hash)(struct dentry *, struct qstr *); + int (*d_compare)(struct dentry *, struct qstr *, struct qstr *); + int (*d_delete)(const struct dentry *); void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); char *(*d_dname)(struct dentry *, char *, int); -- cgit v1.2.3 From fb2d5b86aff355a27ebfc132d3c99f4a940cc3fe Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:26 +1100 Subject: fs: name case update method smpfs and ncpfs want to update a live dentry name in-place. Rather than have them open code the locking, provide a documented dcache API. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index cbfc9567e4e9..6cdf4995c90a 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -290,6 +290,8 @@ static inline struct dentry *d_add_unique(struct dentry *entry, struct inode *in return res; } +extern void dentry_update_name_case(struct dentry *, struct qstr *); + /* used for rename() and baskets */ extern void d_move(struct dentry *, struct dentry *); extern struct dentry *d_ancestor(struct dentry *, struct dentry *); -- cgit v1.2.3 From 621e155a3591962420eacdd39f6f0aa29ceb221e Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:27 +1100 Subject: fs: change d_compare for rcu-walk Change d_compare so it may be called from lock-free RCU lookups. This does put significant restrictions on what may be done from the callback, however there don't seem to have been any problems with in-tree fses. If some strange use case pops up that _really_ cannot cope with the rcu-walk rules, we can just add new rcu-unaware callbacks, which would cause name lookup to drop out of rcu-walk mode. For in-tree filesystems, this is just a mechanical change. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 12 +++++------- include/linux/ncp_fs.h | 4 ++-- 2 files changed, 7 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 6cdf4995c90a..75a072bf2a34 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -134,7 +134,9 @@ enum dentry_d_lock_class struct dentry_operations { int (*d_revalidate)(struct dentry *, struct nameidata *); int (*d_hash)(struct dentry *, struct qstr *); - int (*d_compare)(struct dentry *, struct qstr *, struct qstr *); + int (*d_compare)(const struct dentry *, const struct inode *, + const struct dentry *, const struct inode *, + unsigned int, const char *, const struct qstr *); int (*d_delete)(const struct dentry *); void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); @@ -145,12 +147,8 @@ struct dentry_operations { * Locking rules for dentry_operations callbacks are to be found in * Documentation/filesystems/Locking. Keep it updated! * - * the dentry parameter passed to d_hash and d_compare is the parent - * directory of the entries to be compared. It is used in case these - * functions need any directory specific information for determining - * equivalency classes. Using the dentry itself might not work, as it - * might be a negative dentry which has no information associated with - * it. + * FUrther descriptions are found in Documentation/filesystems/vfs.txt. + * Keep it updated too! */ /* d_flags entries */ diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h index ef663061d5ac..1c27f201c856 100644 --- a/include/linux/ncp_fs.h +++ b/include/linux/ncp_fs.h @@ -184,13 +184,13 @@ struct ncp_entry_info { __u8 file_handle[6]; }; -static inline struct ncp_server *NCP_SBP(struct super_block *sb) +static inline struct ncp_server *NCP_SBP(const struct super_block *sb) { return sb->s_fs_info; } #define NCP_SERVER(inode) NCP_SBP((inode)->i_sb) -static inline struct ncp_inode_info *NCP_FINFO(struct inode *inode) +static inline struct ncp_inode_info *NCP_FINFO(const struct inode *inode) { return container_of(inode, struct ncp_inode_info, vfs_inode); } -- cgit v1.2.3 From b1e6a015a580ad145689ad1d6b4aa0e03e6c868b Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:28 +1100 Subject: fs: change d_hash for rcu-walk Change d_hash so it may be called from lock-free RCU lookups. See similar patch for d_compare for details. For in-tree filesystems, this is just a mechanical change. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 75a072bf2a34..1149e706f04d 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -133,7 +133,8 @@ enum dentry_d_lock_class struct dentry_operations { int (*d_revalidate)(struct dentry *, struct nameidata *); - int (*d_hash)(struct dentry *, struct qstr *); + int (*d_hash)(const struct dentry *, const struct inode *, + struct qstr *); int (*d_compare)(const struct dentry *, const struct inode *, const struct dentry *, const struct inode *, unsigned int, const char *, const struct qstr *); -- cgit v1.2.3 From ec2447c278ee973d35f38e53ca16ba7f965ae33d Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:29 +1100 Subject: hostfs: simplify locking Remove dcache_lock locking from hostfs filesystem, and move it into dcache helpers. All that is required is a coherent path name. Protection from concurrent modification of the namespace after path name generation is not provided in current code, because dcache_lock is dropped before the path is used. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 1149e706f04d..cea27dfca532 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -311,7 +311,7 @@ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); extern char *__d_path(const struct path *path, struct path *root, char *, int); extern char *d_path(const struct path *, char *, int); extern char *d_path_with_unreachable(const struct path *, char *, int); -extern char *__dentry_path(struct dentry *, char *, int); +extern char *dentry_path_raw(struct dentry *, char *, int); extern char *dentry_path(struct dentry *, char *, int); /* Allocation counts.. */ -- cgit v1.2.3 From 789680d1ee9311cdf095241dc02bd9784d799cd1 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:30 +1100 Subject: fs: dcache scale hash Add a new lock, dcache_hash_lock, to protect the dcache hash table from concurrent modification. d_hash is also protected by d_lock. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 35 ++--------------------------------- 1 file changed, 2 insertions(+), 33 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index cea27dfca532..2feb624b67f1 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -184,39 +184,6 @@ struct dentry_operations { extern spinlock_t dcache_lock; extern seqlock_t rename_lock; -/** - * d_drop - drop a dentry - * @dentry: dentry to drop - * - * d_drop() unhashes the entry from the parent dentry hashes, so that it won't - * be found through a VFS lookup any more. Note that this is different from - * deleting the dentry - d_delete will try to mark the dentry negative if - * possible, giving a successful _negative_ lookup, while d_drop will - * just make the cache lookup fail. - * - * d_drop() is used mainly for stuff that wants to invalidate a dentry for some - * reason (NFS timeouts or autofs deletes). - * - * __d_drop requires dentry->d_lock. - */ - -static inline void __d_drop(struct dentry *dentry) -{ - if (!(dentry->d_flags & DCACHE_UNHASHED)) { - dentry->d_flags |= DCACHE_UNHASHED; - hlist_del_rcu(&dentry->d_hash); - } -} - -static inline void d_drop(struct dentry *dentry) -{ - spin_lock(&dcache_lock); - spin_lock(&dentry->d_lock); - __d_drop(dentry); - spin_unlock(&dentry->d_lock); - spin_unlock(&dcache_lock); -} - static inline int dname_external(struct dentry *dentry) { return dentry->d_name.name != dentry->d_iname; @@ -228,6 +195,8 @@ static inline int dname_external(struct dentry *dentry) extern void d_instantiate(struct dentry *, struct inode *); extern struct dentry * d_instantiate_unique(struct dentry *, struct inode *); extern struct dentry * d_materialise_unique(struct dentry *, struct inode *); +extern void __d_drop(struct dentry *dentry); +extern void d_drop(struct dentry *dentry); extern void d_delete(struct dentry *); /* allocate/de-allocate */ -- cgit v1.2.3 From b7ab39f631f505edc2bbdb86620d5493f995c9da Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:32 +1100 Subject: fs: dcache scale dentry refcount Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 2feb624b67f1..b0ade2d46805 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -87,7 +87,7 @@ full_name_hash(const unsigned char *name, unsigned int len) #endif struct dentry { - atomic_t d_count; + unsigned int d_count; /* protected by d_lock */ unsigned int d_flags; /* protected by d_lock */ spinlock_t d_lock; /* per dentry lock */ int d_mounted; @@ -297,17 +297,28 @@ extern char *dentry_path(struct dentry *, char *, int); * needs and they take necessary precautions) you should hold dcache_lock * and call dget_locked() instead of dget(). */ - +static inline struct dentry *dget_dlock(struct dentry *dentry) +{ + if (dentry) { + BUG_ON(!dentry->d_count); + dentry->d_count++; + } + return dentry; +} static inline struct dentry *dget(struct dentry *dentry) { if (dentry) { - BUG_ON(!atomic_read(&dentry->d_count)); - atomic_inc(&dentry->d_count); + spin_lock(&dentry->d_lock); + dget_dlock(dentry); + spin_unlock(&dentry->d_lock); } return dentry; } extern struct dentry * dget_locked(struct dentry *); +extern struct dentry * dget_locked_dlock(struct dentry *); + +extern struct dentry *dget_parent(struct dentry *dentry); /** * d_unhashed - is dentry hashed @@ -338,16 +349,6 @@ static inline void dont_mount(struct dentry *dentry) spin_unlock(&dentry->d_lock); } -static inline struct dentry *dget_parent(struct dentry *dentry) -{ - struct dentry *ret; - - spin_lock(&dentry->d_lock); - ret = dget(dentry->d_parent); - spin_unlock(&dentry->d_lock); - return ret; -} - extern void dput(struct dentry *); static inline int d_mountpoint(struct dentry *dentry) -- cgit v1.2.3 From 2fd6b7f50797f2e993eea59e0a0b8c6399c811dc Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:34 +1100 Subject: fs: dcache scale subdirs Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index b0ade2d46805..ddf4f55624f7 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -305,6 +305,7 @@ static inline struct dentry *dget_dlock(struct dentry *dentry) } return dentry; } + static inline struct dentry *dget(struct dentry *dentry) { if (dentry) { -- cgit v1.2.3 From b23fb0a60379a95e10c671f646b259ea2558421e Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:35 +1100 Subject: fs: scale inode alias list Add a new lock, dcache_inode_lock, to protect the inode's i_dentry list from concurrent modification. d_alias is also protected by d_lock. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index ddf4f55624f7..bda5ec0b077d 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -181,6 +181,7 @@ struct dentry_operations { #define DCACHE_CANT_MOUNT 0x0100 +extern spinlock_t dcache_inode_lock; extern spinlock_t dcache_lock; extern seqlock_t rename_lock; -- cgit v1.2.3 From 949854d02455080d20cd3e1db28a3a18daf7599d Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:37 +1100 Subject: fs: Use rename lock and RCU for multi-step operations The remaining usages for dcache_lock is to allow atomic, multi-step read-side operations over the directory tree by excluding modifications to the tree. Also, to walk in the leaf->root direction in the tree where we don't have a natural d_lock ordering. This could be accomplished by taking every d_lock, but this would mean a huge number of locks and actually gets very tricky. Solve this instead by using the rename seqlock for multi-step read-side operations, retry in case of a rename so we don't walk up the wrong parent. Concurrent dentry insertions are not serialised against. Concurrent deletes are tricky when walking up the directory: our parent might have been deleted when dropping locks so also need to check and retry for that. We can also use the rename lock in cases where livelock is a worry (and it is introduced in subsequent patch). Signed-off-by: Nick Piggin --- include/linux/dcache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index bda5ec0b077d..c963ebada922 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -180,6 +180,7 @@ struct dentry_operations { #define DCACHE_FSNOTIFY_PARENT_WATCHED 0x0080 /* Parent inode is watched by some fsnotify listener */ #define DCACHE_CANT_MOUNT 0x0100 +#define DCACHE_GENOCIDE 0x0200 extern spinlock_t dcache_inode_lock; extern spinlock_t dcache_lock; -- cgit v1.2.3 From b5c84bf6f6fa3a7dfdcb556023a62953574b60ee Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:38 +1100 Subject: fs: dcache remove dcache_lock dcache_lock no longer protects anything. remove it. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 5 ++--- include/linux/fs.h | 6 +++++- include/linux/fsnotify.h | 2 -- include/linux/fsnotify_backend.h | 11 +++++++---- include/linux/namei.h | 1 - 5 files changed, 14 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index c963ebada922..a2ceb94b0e38 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -183,7 +183,6 @@ struct dentry_operations { #define DCACHE_GENOCIDE 0x0200 extern spinlock_t dcache_inode_lock; -extern spinlock_t dcache_lock; extern seqlock_t rename_lock; static inline int dname_external(struct dentry *dentry) @@ -296,8 +295,8 @@ extern char *dentry_path(struct dentry *, char *, int); * destroyed when it has references. dget() should never be * called for dentries with zero reference counter. For these cases * (preferably none, functions in dcache.c are sufficient for normal - * needs and they take necessary precautions) you should hold dcache_lock - * and call dget_locked() instead of dget(). + * needs and they take necessary precautions) you should hold d_lock + * and call dget_dlock() instead of dget(). */ static inline struct dentry *dget_dlock(struct dentry *dentry) { diff --git a/include/linux/fs.h b/include/linux/fs.h index 090f0eacde29..296cf2fde945 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1378,7 +1378,7 @@ struct super_block { #else struct list_head s_files; #endif - /* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */ + /* s_dentry_lru, s_nr_dentry_unused protected by dcache.c lru locks */ struct list_head s_dentry_lru; /* unused dentry lru */ int s_nr_dentry_unused; /* # of dentry on lru */ @@ -2446,6 +2446,10 @@ static inline ino_t parent_ino(struct dentry *dentry) { ino_t res; + /* + * Don't strictly need d_lock here? If the parent ino could change + * then surely we'd have a deeper race in the caller? + */ spin_lock(&dentry->d_lock); res = dentry->d_parent->d_inode->i_ino; spin_unlock(&dentry->d_lock); diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index b10bcdeaef76..2a53f10712b3 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -17,7 +17,6 @@ /* * fsnotify_d_instantiate - instantiate a dentry for inode - * Called with dcache_lock held. */ static inline void fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode) @@ -62,7 +61,6 @@ static inline int fsnotify_perm(struct file *file, int mask) /* * fsnotify_d_move - dentry has been moved - * Called with dcache_lock and dentry->d_lock held. */ static inline void fsnotify_d_move(struct dentry *dentry) { diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 7380763595d3..69ad89b50489 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -329,9 +329,15 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) { struct dentry *parent; - assert_spin_locked(&dcache_lock); assert_spin_locked(&dentry->d_lock); + /* + * Serialisation of setting PARENT_WATCHED on the dentries is provided + * by d_lock. If inotify_inode_watched changes after we have taken + * d_lock, the following __fsnotify_update_child_dentry_flags call will + * find our entry, so it will spin until we complete here, and update + * us with the new state. + */ parent = dentry->d_parent; if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode)) dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED; @@ -341,15 +347,12 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) /* * fsnotify_d_instantiate - instantiate a dentry for inode - * Called with dcache_lock held. */ static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode) { if (!inode) return; - assert_spin_locked(&dcache_lock); - spin_lock(&dentry->d_lock); __fsnotify_update_dcache_flags(dentry); spin_unlock(&dentry->d_lock); diff --git a/include/linux/namei.h b/include/linux/namei.h index 05b441d93642..aec730b53935 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -41,7 +41,6 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND}; * - require a directory * - ending slashes ok even for nonexistent files * - internal "there are more path components" flag - * - locked when lookup done with dcache_lock held * - dentry cache is untrusted; force a real lookup */ #define LOOKUP_FOLLOW 1 -- cgit v1.2.3 From dc0474be3e27463d4d4a2793f82366eed906f223 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:43 +1100 Subject: fs: dcache rationalise dget variants dget_locked was a shortcut to avoid the lazy lru manipulation when we already held dcache_lock (lru manipulation was relatively cheap at that point). However, how that the lru lock is an innermost one, we never hold it at any caller, so the lock cost can now be avoided. We already have well working lazy dcache LRU, so it should be fine to defer LRU manipulations to scan time. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index a2ceb94b0e38..ca648685f0cc 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -287,23 +287,17 @@ extern char *dentry_path(struct dentry *, char *, int); /* Allocation counts.. */ /** - * dget, dget_locked - get a reference to a dentry + * dget, dget_dlock - get a reference to a dentry * @dentry: dentry to get a reference to * * Given a dentry or %NULL pointer increment the reference count * if appropriate and return the dentry. A dentry will not be - * destroyed when it has references. dget() should never be - * called for dentries with zero reference counter. For these cases - * (preferably none, functions in dcache.c are sufficient for normal - * needs and they take necessary precautions) you should hold d_lock - * and call dget_dlock() instead of dget(). + * destroyed when it has references. */ static inline struct dentry *dget_dlock(struct dentry *dentry) { - if (dentry) { - BUG_ON(!dentry->d_count); + if (dentry) dentry->d_count++; - } return dentry; } @@ -317,9 +311,6 @@ static inline struct dentry *dget(struct dentry *dentry) return dentry; } -extern struct dentry * dget_locked(struct dentry *); -extern struct dentry * dget_locked_dlock(struct dentry *); - extern struct dentry *dget_parent(struct dentry *dentry); /** -- cgit v1.2.3 From fa0d7e3de6d6fc5004ad9dea0dd6b286af8f03e9 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:49 +1100 Subject: fs: icache RCU free inodes RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: Nick Piggin --- include/linux/fs.h | 5 ++++- include/linux/net.h | 1 - 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 296cf2fde945..1ff4d0a33b25 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -737,7 +737,10 @@ struct inode { struct list_head i_wb_list; /* backing dev IO list */ struct list_head i_lru; /* inode LRU list */ struct list_head i_sb_list; - struct list_head i_dentry; + union { + struct list_head i_dentry; + struct rcu_head i_rcu; + }; unsigned long i_ino; atomic_t i_count; unsigned int i_nlink; diff --git a/include/linux/net.h b/include/linux/net.h index 16faa130088c..06bde4908473 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -120,7 +120,6 @@ enum sock_shutdown_cmd { struct socket_wq { wait_queue_head_t wait; struct fasync_struct *fasync_list; - struct rcu_head rcu; } ____cacheline_aligned_in_smp; /** -- cgit v1.2.3 From ff0c7d15f9787b7e8c601533c015295cc68329f8 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:50 +1100 Subject: fs: avoid inode RCU freeing for pseudo fs Pseudo filesystems that don't put inode on RCU list or reachable by rcu-walk dentries do not need to RCU free their inodes. Signed-off-by: Nick Piggin --- include/linux/fs.h | 1 + include/linux/net.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 1ff4d0a33b25..ea202fff44f8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2233,6 +2233,7 @@ extern void iget_failed(struct inode *); extern void end_writeback(struct inode *); extern void __destroy_inode(struct inode *); extern struct inode *new_inode(struct super_block *); +extern void free_inode_nonrcu(struct inode *inode); extern int should_remove_suid(struct dentry *); extern int file_remove_suid(struct file *); diff --git a/include/linux/net.h b/include/linux/net.h index 06bde4908473..16faa130088c 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -120,6 +120,7 @@ enum sock_shutdown_cmd { struct socket_wq { wait_queue_head_t wait; struct fasync_struct *fasync_list; + struct rcu_head rcu; } ____cacheline_aligned_in_smp; /** -- cgit v1.2.3 From 3c22cd5709e8143444a6d08682a87f4c57902df3 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:51 +1100 Subject: kernel: optimise seqlock Add branch annotations for seqlock read fastpath, and introduce __read_seqcount_begin and __read_seqcount_end functions, that can avoid the smp_rmb() if used carefully. These will be used by store-free path walking algorithm performance is critical and seqlocks are in use. Signed-off-by: Nick Piggin --- include/linux/seqlock.h | 80 ++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 73 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index 632205ccc25d..e98cd2e57194 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -107,7 +107,7 @@ static __always_inline int read_seqretry(const seqlock_t *sl, unsigned start) { smp_rmb(); - return (sl->sequence != start); + return unlikely(sl->sequence != start); } @@ -125,14 +125,25 @@ typedef struct seqcount { #define SEQCNT_ZERO { 0 } #define seqcount_init(x) do { *(x) = (seqcount_t) SEQCNT_ZERO; } while (0) -/* Start of read using pointer to a sequence counter only. */ -static inline unsigned read_seqcount_begin(const seqcount_t *s) +/** + * __read_seqcount_begin - begin a seq-read critical section (without barrier) + * @s: pointer to seqcount_t + * Returns: count to be passed to read_seqcount_retry + * + * __read_seqcount_begin is like read_seqcount_begin, but has no smp_rmb() + * barrier. Callers should ensure that smp_rmb() or equivalent ordering is + * provided before actually loading any of the variables that are to be + * protected in this critical section. + * + * Use carefully, only in critical code, and comment how the barrier is + * provided. + */ +static inline unsigned __read_seqcount_begin(const seqcount_t *s) { unsigned ret; repeat: ret = s->sequence; - smp_rmb(); if (unlikely(ret & 1)) { cpu_relax(); goto repeat; @@ -140,14 +151,56 @@ repeat: return ret; } -/* - * Test if reader processed invalid data because sequence number has changed. +/** + * read_seqcount_begin - begin a seq-read critical section + * @s: pointer to seqcount_t + * Returns: count to be passed to read_seqcount_retry + * + * read_seqcount_begin opens a read critical section of the given seqcount. + * Validity of the critical section is tested by checking read_seqcount_retry + * function. + */ +static inline unsigned read_seqcount_begin(const seqcount_t *s) +{ + unsigned ret = __read_seqcount_begin(s); + smp_rmb(); + return ret; +} + +/** + * __read_seqcount_retry - end a seq-read critical section (without barrier) + * @s: pointer to seqcount_t + * @start: count, from read_seqcount_begin + * Returns: 1 if retry is required, else 0 + * + * __read_seqcount_retry is like read_seqcount_retry, but has no smp_rmb() + * barrier. Callers should ensure that smp_rmb() or equivalent ordering is + * provided before actually loading any of the variables that are to be + * protected in this critical section. + * + * Use carefully, only in critical code, and comment how the barrier is + * provided. + */ +static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start) +{ + return unlikely(s->sequence != start); +} + +/** + * read_seqcount_retry - end a seq-read critical section + * @s: pointer to seqcount_t + * @start: count, from read_seqcount_begin + * Returns: 1 if retry is required, else 0 + * + * read_seqcount_retry closes a read critical section of the given seqcount. + * If the critical section was invalid, it must be ignored (and typically + * retried). */ static inline int read_seqcount_retry(const seqcount_t *s, unsigned start) { smp_rmb(); - return s->sequence != start; + return __read_seqcount_retry(s, start); } @@ -167,6 +220,19 @@ static inline void write_seqcount_end(seqcount_t *s) s->sequence++; } +/** + * write_seqcount_barrier - invalidate in-progress read-side seq operations + * @s: pointer to seqcount_t + * + * After write_seqcount_barrier, no read-side seq operations will complete + * successfully and see data older than this. + */ +static inline void write_seqcount_barrier(seqcount_t *s) +{ + smp_wmb(); + s->sequence+=2; +} + /* * Possible sw/hw IRQ protected versions of the interfaces. */ -- cgit v1.2.3 From 31e6b01f4183ff419a6d1f86177cbf4662347cec Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:52 +1100 Subject: fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 32 +++++++++++++++++++++++++++++--- include/linux/namei.h | 15 ++++++++++----- include/linux/security.h | 8 +++++++- 3 files changed, 46 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index ca648685f0cc..c2e7390289cc 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -5,6 +5,7 @@ #include #include #include +#include #include #include @@ -90,6 +91,7 @@ struct dentry { unsigned int d_count; /* protected by d_lock */ unsigned int d_flags; /* protected by d_lock */ spinlock_t d_lock; /* per dentry lock */ + seqcount_t d_seq; /* per dentry seqlock */ int d_mounted; struct inode *d_inode; /* Where the name belongs to - NULL is * negative */ @@ -266,9 +268,33 @@ extern void d_move(struct dentry *, struct dentry *); extern struct dentry *d_ancestor(struct dentry *, struct dentry *); /* appendix may either be NULL or be used for transname suffixes */ -extern struct dentry * d_lookup(struct dentry *, struct qstr *); -extern struct dentry * __d_lookup(struct dentry *, struct qstr *); -extern struct dentry * d_hash_and_lookup(struct dentry *, struct qstr *); +extern struct dentry *d_lookup(struct dentry *, struct qstr *); +extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *); +extern struct dentry *__d_lookup(struct dentry *, struct qstr *); +extern struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name, + unsigned *seq, struct inode **inode); + +/** + * __d_rcu_to_refcount - take a refcount on dentry if sequence check is ok + * @dentry: dentry to take a ref on + * @seq: seqcount to verify against + * @Returns: 0 on failure, else 1. + * + * __d_rcu_to_refcount operates on a dentry,seq pair that was returned + * by __d_lookup_rcu, to get a reference on an rcu-walk dentry. + */ +static inline int __d_rcu_to_refcount(struct dentry *dentry, unsigned seq) +{ + int ret = 0; + + assert_spin_locked(&dentry->d_lock); + if (!read_seqcount_retry(&dentry->d_seq, seq)) { + ret = 1; + dentry->d_count++; + } + + return ret; +} /* validate "insecure" dentry pointer */ extern int d_validate(struct dentry *, struct dentry *); diff --git a/include/linux/namei.h b/include/linux/namei.h index aec730b53935..18d06add0a40 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -19,7 +19,10 @@ struct nameidata { struct path path; struct qstr last; struct path root; + struct file *file; + struct inode *inode; /* path.dentry.d_inode */ unsigned int flags; + unsigned seq; int last_type; unsigned depth; char *saved_names[MAX_NESTED_LINKS + 1]; @@ -43,11 +46,13 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND}; * - internal "there are more path components" flag * - dentry cache is untrusted; force a real lookup */ -#define LOOKUP_FOLLOW 1 -#define LOOKUP_DIRECTORY 2 -#define LOOKUP_CONTINUE 4 -#define LOOKUP_PARENT 16 -#define LOOKUP_REVAL 64 +#define LOOKUP_FOLLOW 0x0001 +#define LOOKUP_DIRECTORY 0x0002 +#define LOOKUP_CONTINUE 0x0004 + +#define LOOKUP_PARENT 0x0010 +#define LOOKUP_REVAL 0x0020 +#define LOOKUP_RCU 0x0040 /* * Intent data */ diff --git a/include/linux/security.h b/include/linux/security.h index fd4d55fb8845..ed95401970c7 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -457,7 +457,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * called when the actual read/write operations are performed. * @inode contains the inode structure to check. * @mask contains the permission mask. - * @nd contains the nameidata (may be NULL). * Return 0 if permission is granted. * @inode_setattr: * Check permission before setting file attributes. Note that the kernel @@ -1713,6 +1712,7 @@ int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry, int security_inode_readlink(struct dentry *dentry); int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd); int security_inode_permission(struct inode *inode, int mask); +int security_inode_exec_permission(struct inode *inode, unsigned int flags); int security_inode_setattr(struct dentry *dentry, struct iattr *attr); int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry); int security_inode_setxattr(struct dentry *dentry, const char *name, @@ -2102,6 +2102,12 @@ static inline int security_inode_permission(struct inode *inode, int mask) return 0; } +static inline int security_inode_exec_permission(struct inode *inode, + unsigned int flags) +{ + return 0; +} + static inline int security_inode_setattr(struct dentry *dentry, struct iattr *attr) { -- cgit v1.2.3 From c28cc36469554dc55540f059fbdc7fa22a2c31fc Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:53 +1100 Subject: fs: fs_struct use seqlock Use a seqlock in the fs_struct to enable us to take an atomic copy of the complete cwd and root paths. Use this in the RCU lookup path to avoid a thread-shared spinlock in RCU lookup operations. Multi-threaded apps may now perform path lookups with scalability matching multi-process apps. Operations such as stat(2) become very scalable for multi-threaded workload. Signed-off-by: Nick Piggin --- include/linux/fs_struct.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h index a42b5bf02f8b..003dc0fd7347 100644 --- a/include/linux/fs_struct.h +++ b/include/linux/fs_struct.h @@ -2,10 +2,13 @@ #define _LINUX_FS_STRUCT_H #include +#include +#include struct fs_struct { int users; spinlock_t lock; + seqcount_t seq; int umask; int in_exec; struct path root, pwd; -- cgit v1.2.3 From 5f57cbcc02cf18f6b22ef4066bb10afeb8f930ff Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:54 +1100 Subject: fs: dcache remove d_mounted Rather than keep a d_mounted count in the dentry, set a dentry flag instead. The flag can be cleared by checking the hash table to see if there are any mounts left, which is not time critical because it is performed at detach time. The mounted state of a dentry is only used to speculatively take a look in the mount hash table if it is set -- before following the mount, vfsmount lock is taken and mount re-checked without races. This saves 4 bytes on 32-bit, nothing on 64-bit but it does provide a hole I might use later (and some configs have larger than 32-bit spinlocks which might make use of the hole). Autofs4 conversion and changelog by Ian Kent : In autofs4, when expring direct (or offset) mounts we need to ensure that we block user path walks into the autofs mount, which is covered by another mount. To do this we clear the mounted status so that follows stop before walking into the mount and are essentially blocked until the expire is completed. The automount daemon still finds the correct dentry for the umount due to the follow mount logic in fs/autofs4/root.c:autofs4_follow_link(), which is set as an inode operation for direct and offset mounts only and is called following the lookup that stopped at the covered mount. At the end of the expire the covering mount probably has gone away so the mounted status need not be restored. But we need to check this and only restore the mounted status if the expire failed. XXX: autofs may not work right if we have other mounts go over the top of it? Signed-off-by: Nick Piggin --- include/linux/dcache.h | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index c2e7390289cc..e4414693065e 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -92,7 +92,6 @@ struct dentry { unsigned int d_flags; /* protected by d_lock */ spinlock_t d_lock; /* per dentry lock */ seqcount_t d_seq; /* per dentry seqlock */ - int d_mounted; struct inode *d_inode; /* Where the name belongs to - NULL is * negative */ /* @@ -156,33 +155,34 @@ struct dentry_operations { /* d_flags entries */ #define DCACHE_AUTOFS_PENDING 0x0001 /* autofs: "under construction" */ -#define DCACHE_NFSFS_RENAMED 0x0002 /* this dentry has been "silly - * renamed" and has to be - * deleted on the last dput() - */ -#define DCACHE_DISCONNECTED 0x0004 - /* This dentry is possibly not currently connected to the dcache tree, - * in which case its parent will either be itself, or will have this - * flag as well. nfsd will not use a dentry with this bit set, but will - * first endeavour to clear the bit either by discovering that it is - * connected, or by performing lookup operations. Any filesystem which - * supports nfsd_operations MUST have a lookup function which, if it finds - * a directory inode with a DCACHE_DISCONNECTED dentry, will d_move - * that dentry into place and return that dentry rather than the passed one, - * typically using d_splice_alias. - */ +#define DCACHE_NFSFS_RENAMED 0x0002 + /* this dentry has been "silly renamed" and has to be deleted on the last + * dput() */ + +#define DCACHE_DISCONNECTED 0x0004 + /* This dentry is possibly not currently connected to the dcache tree, in + * which case its parent will either be itself, or will have this flag as + * well. nfsd will not use a dentry with this bit set, but will first + * endeavour to clear the bit either by discovering that it is connected, + * or by performing lookup operations. Any filesystem which supports + * nfsd_operations MUST have a lookup function which, if it finds a + * directory inode with a DCACHE_DISCONNECTED dentry, will d_move that + * dentry into place and return that dentry rather than the passed one, + * typically using d_splice_alias. */ #define DCACHE_REFERENCED 0x0008 /* Recently used, don't discard. */ #define DCACHE_UNHASHED 0x0010 - -#define DCACHE_INOTIFY_PARENT_WATCHED 0x0020 /* Parent inode is watched by inotify */ +#define DCACHE_INOTIFY_PARENT_WATCHED 0x0020 + /* Parent inode is watched by inotify */ #define DCACHE_COOKIE 0x0040 /* For use by dcookie subsystem */ - -#define DCACHE_FSNOTIFY_PARENT_WATCHED 0x0080 /* Parent inode is watched by some fsnotify listener */ +#define DCACHE_FSNOTIFY_PARENT_WATCHED 0x0080 + /* Parent inode is watched by some fsnotify listener */ #define DCACHE_CANT_MOUNT 0x0100 #define DCACHE_GENOCIDE 0x0200 +#define DCACHE_MOUNTED 0x0400 /* is a mountpoint */ + extern spinlock_t dcache_inode_lock; extern seqlock_t rename_lock; @@ -372,7 +372,7 @@ extern void dput(struct dentry *); static inline int d_mountpoint(struct dentry *dentry) { - return dentry->d_mounted; + return dentry->d_flags & DCACHE_MOUNTED; } extern struct vfsmount *lookup_mnt(struct path *); -- cgit v1.2.3 From fb045adb99d9b7c562dc7fef834857f78249daa1 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:55 +1100 Subject: fs: dcache reduce branches in lookup path Reduce some branches and memory accesses in dcache lookup by adding dentry flags to indicate common d_ops are set, rather than having to check them. This saves a pointer memory access (dentry->d_op) in common path lookup situations, and saves another pointer load and branch in cases where we have d_op but not the particular operation. Patched with: git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i Signed-off-by: Nick Piggin --- include/linux/dcache.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index e4414693065e..f4b40a751f09 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -183,6 +183,11 @@ struct dentry_operations { #define DCACHE_GENOCIDE 0x0200 #define DCACHE_MOUNTED 0x0400 /* is a mountpoint */ +#define DCACHE_OP_HASH 0x1000 +#define DCACHE_OP_COMPARE 0x2000 +#define DCACHE_OP_REVALIDATE 0x4000 +#define DCACHE_OP_DELETE 0x8000 + extern spinlock_t dcache_inode_lock; extern seqlock_t rename_lock; @@ -201,6 +206,7 @@ extern struct dentry * d_materialise_unique(struct dentry *, struct inode *); extern void __d_drop(struct dentry *dentry); extern void d_drop(struct dentry *dentry); extern void d_delete(struct dentry *); +extern void d_set_d_op(struct dentry *dentry, const struct dentry_operations *op); /* allocate/de-allocate */ extern struct dentry * d_alloc(struct dentry *, const struct qstr *); -- cgit v1.2.3 From 44a7d7a878c9cbb74f236ea755b25b6b2e26a9a9 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:56 +1100 Subject: fs: cache optimise dentry and inode for rcu-walk Put dentry and inode fields into top of data structure. This allows RCU path traversal to perform an RCU dentry lookup in a path walk by touching only the first 56 bytes of the dentry. We also fit in 8 bytes of inline name in the first 64 bytes, so for short names, only 64 bytes needs to be touched to perform the lookup. We should get rid of the hash->prev pointer from the first 64 bytes, and fit 16 bytes of name in there, which will take care of 81% rather than 32% of the kernel tree. inode is also rearranged so that RCU lookup will only touch a single cacheline in the inode, plus one in the i_ops structure. This is important for directory component lookups in RCU path walking. In the kernel source, directory names average is around 6 chars, so this works. When we reach the last element of the lookup, we need to lock it and take its refcount which requires another cacheline access. Align dentry and inode operations structs, so members will be at predictable offsets and we can group common operations into head of structure. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 36 +++++++++++++++++++----------------- include/linux/fs.h | 42 +++++++++++++++++++++++------------------- 2 files changed, 42 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index f4b40a751f09..b1aeda077258 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -82,25 +82,33 @@ full_name_hash(const unsigned char *name, unsigned int len) * large memory footprint increase). */ #ifdef CONFIG_64BIT -#define DNAME_INLINE_LEN_MIN 32 /* 192 bytes */ +# define DNAME_INLINE_LEN 32 /* 192 bytes */ #else -#define DNAME_INLINE_LEN_MIN 40 /* 128 bytes */ +# ifdef CONFIG_SMP +# define DNAME_INLINE_LEN 36 /* 128 bytes */ +# else +# define DNAME_INLINE_LEN 40 /* 128 bytes */ +# endif #endif struct dentry { - unsigned int d_count; /* protected by d_lock */ + /* RCU lookup touched fields */ unsigned int d_flags; /* protected by d_lock */ - spinlock_t d_lock; /* per dentry lock */ seqcount_t d_seq; /* per dentry seqlock */ - struct inode *d_inode; /* Where the name belongs to - NULL is - * negative */ - /* - * The next three fields are touched by __d_lookup. Place them here - * so they all fit in a cache line. - */ struct hlist_node d_hash; /* lookup hash list */ struct dentry *d_parent; /* parent directory */ struct qstr d_name; + struct inode *d_inode; /* Where the name belongs to - NULL is + * negative */ + unsigned char d_iname[DNAME_INLINE_LEN]; /* small names */ + + /* Ref lookup also touches following */ + unsigned int d_count; /* protected by d_lock */ + spinlock_t d_lock; /* per dentry lock */ + const struct dentry_operations *d_op; + struct super_block *d_sb; /* The root of the dentry tree */ + unsigned long d_time; /* used by d_revalidate */ + void *d_fsdata; /* fs-specific data */ struct list_head d_lru; /* LRU list */ /* @@ -112,12 +120,6 @@ struct dentry { } d_u; struct list_head d_subdirs; /* our children */ struct list_head d_alias; /* inode alias list */ - unsigned long d_time; /* used by d_revalidate */ - const struct dentry_operations *d_op; - struct super_block *d_sb; /* The root of the dentry tree */ - void *d_fsdata; /* fs-specific data */ - - unsigned char d_iname[DNAME_INLINE_LEN_MIN]; /* small names */ }; /* @@ -143,7 +145,7 @@ struct dentry_operations { void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); char *(*d_dname)(struct dentry *, char *, int); -}; +} ____cacheline_aligned; /* * Locking rules for dentry_operations callbacks are to be found in diff --git a/include/linux/fs.h b/include/linux/fs.h index ea202fff44f8..a04aa96acb71 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -733,6 +733,20 @@ struct posix_acl; #define ACL_NOT_CACHED ((void *)(-1)) struct inode { + /* RCU path lookup touches following: */ + umode_t i_mode; + uid_t i_uid; + gid_t i_gid; + const struct inode_operations *i_op; + struct super_block *i_sb; + + spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ + unsigned int i_flags; + struct mutex i_mutex; + + unsigned long i_state; + unsigned long dirtied_when; /* jiffies of first dirtying */ + struct hlist_node i_hash; struct list_head i_wb_list; /* backing dev IO list */ struct list_head i_lru; /* inode LRU list */ @@ -744,8 +758,6 @@ struct inode { unsigned long i_ino; atomic_t i_count; unsigned int i_nlink; - uid_t i_uid; - gid_t i_gid; dev_t i_rdev; unsigned int i_blkbits; u64 i_version; @@ -758,13 +770,8 @@ struct inode { struct timespec i_ctime; blkcnt_t i_blocks; unsigned short i_bytes; - umode_t i_mode; - spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ - struct mutex i_mutex; struct rw_semaphore i_alloc_sem; - const struct inode_operations *i_op; const struct file_operations *i_fop; /* former ->i_op->default_file_ops */ - struct super_block *i_sb; struct file_lock *i_flock; struct address_space *i_mapping; struct address_space i_data; @@ -785,11 +792,6 @@ struct inode { struct hlist_head i_fsnotify_marks; #endif - unsigned long i_state; - unsigned long dirtied_when; /* jiffies of first dirtying */ - - unsigned int i_flags; - #ifdef CONFIG_IMA /* protected by i_lock */ unsigned int i_readcount; /* struct files open RO */ @@ -1549,8 +1551,15 @@ struct file_operations { }; struct inode_operations { - int (*create) (struct inode *,struct dentry *,int, struct nameidata *); struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *); + void * (*follow_link) (struct dentry *, struct nameidata *); + int (*permission) (struct inode *, int); + int (*check_acl)(struct inode *, int); + + int (*readlink) (struct dentry *, char __user *,int); + void (*put_link) (struct dentry *, struct nameidata *, void *); + + int (*create) (struct inode *,struct dentry *,int, struct nameidata *); int (*link) (struct dentry *,struct inode *,struct dentry *); int (*unlink) (struct inode *,struct dentry *); int (*symlink) (struct inode *,struct dentry *,const char *); @@ -1559,12 +1568,7 @@ struct inode_operations { int (*mknod) (struct inode *,struct dentry *,int,dev_t); int (*rename) (struct inode *, struct dentry *, struct inode *, struct dentry *); - int (*readlink) (struct dentry *, char __user *,int); - void * (*follow_link) (struct dentry *, struct nameidata *); - void (*put_link) (struct dentry *, struct nameidata *, void *); void (*truncate) (struct inode *); - int (*permission) (struct inode *, int); - int (*check_acl)(struct inode *, int); int (*setattr) (struct dentry *, struct iattr *); int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *); int (*setxattr) (struct dentry *, const char *,const void *,size_t,int); @@ -1576,7 +1580,7 @@ struct inode_operations { loff_t len); int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); -}; +} ____cacheline_aligned; struct seq_file; -- cgit v1.2.3 From 34286d6662308d82aed891852d04c7c3a2649b16 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:57 +1100 Subject: fs: rcu-walk aware d_revalidate method Require filesystems be aware of .d_revalidate being called in rcu-walk mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning -ECHILD from all implementations. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index b1aeda077258..8b2064d02928 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -190,7 +190,6 @@ struct dentry_operations { #define DCACHE_OP_REVALIDATE 0x4000 #define DCACHE_OP_DELETE 0x8000 - extern spinlock_t dcache_inode_lock; extern seqlock_t rename_lock; -- cgit v1.2.3 From b74c79e99389cd79b31fcc08f82c24e492e63c7e Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:58 +1100 Subject: fs: provide rcu-walk aware permission i_ops Signed-off-by: Nick Piggin --- include/linux/coda_linux.h | 2 +- include/linux/fs.h | 10 ++++++---- include/linux/generic_acl.h | 2 +- include/linux/nfs_fs.h | 2 +- include/linux/reiserfs_xattr.h | 2 +- 5 files changed, 10 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h index 2e914d0771b9..4ccc59c1ea82 100644 --- a/include/linux/coda_linux.h +++ b/include/linux/coda_linux.h @@ -37,7 +37,7 @@ extern const struct file_operations coda_ioctl_operations; /* operations shared over more than one file */ int coda_open(struct inode *i, struct file *f); int coda_release(struct inode *i, struct file *f); -int coda_permission(struct inode *inode, int mask); +int coda_permission(struct inode *inode, int mask, unsigned int flags); int coda_revalidate_inode(struct dentry *); int coda_getattr(struct vfsmount *, struct dentry *, struct kstat *); int coda_setattr(struct dentry *, struct iattr *); diff --git a/include/linux/fs.h b/include/linux/fs.h index a04aa96acb71..d5a4d42f655b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1550,11 +1550,13 @@ struct file_operations { int (*setlease)(struct file *, long, struct file_lock **); }; +#define IPERM_FLAG_RCU 0x0001 + struct inode_operations { struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *); void * (*follow_link) (struct dentry *, struct nameidata *); - int (*permission) (struct inode *, int); - int (*check_acl)(struct inode *, int); + int (*permission) (struct inode *, int, unsigned int); + int (*check_acl)(struct inode *, int, unsigned int); int (*readlink) (struct dentry *, char __user *,int); void (*put_link) (struct dentry *, struct nameidata *, void *); @@ -2165,8 +2167,8 @@ extern sector_t bmap(struct inode *, sector_t); #endif extern int notify_change(struct dentry *, struct iattr *); extern int inode_permission(struct inode *, int); -extern int generic_permission(struct inode *, int, - int (*check_acl)(struct inode *, int)); +extern int generic_permission(struct inode *, int, unsigned int, + int (*check_acl)(struct inode *, int, unsigned int)); static inline bool execute_ok(struct inode *inode) { diff --git a/include/linux/generic_acl.h b/include/linux/generic_acl.h index 574bea4013b6..0437e377b555 100644 --- a/include/linux/generic_acl.h +++ b/include/linux/generic_acl.h @@ -10,6 +10,6 @@ extern const struct xattr_handler generic_acl_default_handler; int generic_acl_init(struct inode *, struct inode *); int generic_acl_chmod(struct inode *); -int generic_check_acl(struct inode *inode, int mask); +int generic_check_acl(struct inode *inode, int mask, unsigned int flags); #endif /* LINUX_GENERIC_ACL_H */ diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 29d504d5d1c3..0779bb8f95be 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -351,7 +351,7 @@ extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *); extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr); extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr); extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *); -extern int nfs_permission(struct inode *, int); +extern int nfs_permission(struct inode *, int, unsigned int); extern int nfs_open(struct inode *, struct file *); extern int nfs_release(struct inode *, struct file *); extern int nfs_attribute_timeout(struct inode *inode); diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h index b2cf2089769b..3b94c91f20a6 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/linux/reiserfs_xattr.h @@ -41,7 +41,7 @@ int reiserfs_xattr_init(struct super_block *sb, int mount_flags); int reiserfs_lookup_privroot(struct super_block *sb); int reiserfs_delete_xattrs(struct inode *inode); int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs); -int reiserfs_permission(struct inode *inode, int mask); +int reiserfs_permission(struct inode *inode, int mask, unsigned int flags); #ifdef CONFIG_REISERFS_FS_XATTR #define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir) -- cgit v1.2.3 From 1e1743ebe35ec7e3c1fa732408358fbc614cbbe5 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:49:59 +1100 Subject: fs: provide simple rcu-walk generic_check_acl implementation This simple implementation just checks for no ACLs on the inode, and if so, then the rcu-walk may proceed, otherwise fail it. This could easily be extended to put acls under RCU and check them under seqlock, if need be. But this implementation is enough to show the rcu-walk aware permissions code for path lookups is working, and will handle cases where there are no ACLs or ACLs in just the final element. This patch implicity converts tmpfs to rcu-aware permission check. Subsequent patches onvert ext*, xfs, and, btrfs. Each of these uses acl/permission code in a different way, so convert them all to provide templates and proof of concept. Signed-off-by: Nick Piggin --- include/linux/posix_acl.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include') diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h index 67608161df6b..d68283a898bb 100644 --- a/include/linux/posix_acl.h +++ b/include/linux/posix_acl.h @@ -108,6 +108,25 @@ static inline struct posix_acl *get_cached_acl(struct inode *inode, int type) return acl; } +static inline int negative_cached_acl(struct inode *inode, int type) +{ + struct posix_acl **p, *acl; + switch (type) { + case ACL_TYPE_ACCESS: + p = &inode->i_acl; + break; + case ACL_TYPE_DEFAULT: + p = &inode->i_default_acl; + break; + default: + BUG(); + } + acl = ACCESS_ONCE(*p); + if (acl) + return 0; + return 1; +} + static inline void set_cached_acl(struct inode *inode, int type, struct posix_acl *acl) -- cgit v1.2.3 From 4e35e6070b1ceed89c3bba2af4216c286fb1dafd Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:50:03 +1100 Subject: kernel: add bl_list Introduce a type of hlist that can support the use of the lowest bit in the hlist_head. This will be subsequently used to implement per-bucket bit spinlock for inode and dentry hashes, and may be useful in other cases such as network hashes. Reviewed-by: Paul E. McKenney Signed-off-by: Nick Piggin --- include/linux/list_bl.h | 144 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/rculist_bl.h | 127 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 271 insertions(+) create mode 100644 include/linux/list_bl.h create mode 100644 include/linux/rculist_bl.h (limited to 'include') diff --git a/include/linux/list_bl.h b/include/linux/list_bl.h new file mode 100644 index 000000000000..9ee97e7f2be4 --- /dev/null +++ b/include/linux/list_bl.h @@ -0,0 +1,144 @@ +#ifndef _LINUX_LIST_BL_H +#define _LINUX_LIST_BL_H + +#include + +/* + * Special version of lists, where head of the list has a lock in the lowest + * bit. This is useful for scalable hash tables without increasing memory + * footprint overhead. + * + * For modification operations, the 0 bit of hlist_bl_head->first + * pointer must be set. + * + * With some small modifications, this can easily be adapted to store several + * arbitrary bits (not just a single lock bit), if the need arises to store + * some fast and compact auxiliary data. + */ + +#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK) +#define LIST_BL_LOCKMASK 1UL +#else +#define LIST_BL_LOCKMASK 0UL +#endif + +#ifdef CONFIG_DEBUG_LIST +#define LIST_BL_BUG_ON(x) BUG_ON(x) +#else +#define LIST_BL_BUG_ON(x) +#endif + + +struct hlist_bl_head { + struct hlist_bl_node *first; +}; + +struct hlist_bl_node { + struct hlist_bl_node *next, **pprev; +}; +#define INIT_HLIST_BL_HEAD(ptr) \ + ((ptr)->first = NULL) + +static inline void INIT_HLIST_BL_NODE(struct hlist_bl_node *h) +{ + h->next = NULL; + h->pprev = NULL; +} + +#define hlist_bl_entry(ptr, type, member) container_of(ptr,type,member) + +static inline int hlist_bl_unhashed(const struct hlist_bl_node *h) +{ + return !h->pprev; +} + +static inline struct hlist_bl_node *hlist_bl_first(struct hlist_bl_head *h) +{ + return (struct hlist_bl_node *) + ((unsigned long)h->first & ~LIST_BL_LOCKMASK); +} + +static inline void hlist_bl_set_first(struct hlist_bl_head *h, + struct hlist_bl_node *n) +{ + LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK); + LIST_BL_BUG_ON(!((unsigned long)h->first & LIST_BL_LOCKMASK)); + h->first = (struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK); +} + +static inline int hlist_bl_empty(const struct hlist_bl_head *h) +{ + return !((unsigned long)h->first & ~LIST_BL_LOCKMASK); +} + +static inline void hlist_bl_add_head(struct hlist_bl_node *n, + struct hlist_bl_head *h) +{ + struct hlist_bl_node *first = hlist_bl_first(h); + + n->next = first; + if (first) + first->pprev = &n->next; + n->pprev = &h->first; + hlist_bl_set_first(h, n); +} + +static inline void __hlist_bl_del(struct hlist_bl_node *n) +{ + struct hlist_bl_node *next = n->next; + struct hlist_bl_node **pprev = n->pprev; + + LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK); + + /* pprev may be `first`, so be careful not to lose the lock bit */ + *pprev = (struct hlist_bl_node *) + ((unsigned long)next | + ((unsigned long)*pprev & LIST_BL_LOCKMASK)); + if (next) + next->pprev = pprev; +} + +static inline void hlist_bl_del(struct hlist_bl_node *n) +{ + __hlist_bl_del(n); + n->next = LIST_POISON1; + n->pprev = LIST_POISON2; +} + +static inline void hlist_bl_del_init(struct hlist_bl_node *n) +{ + if (!hlist_bl_unhashed(n)) { + __hlist_bl_del(n); + INIT_HLIST_BL_NODE(n); + } +} + +/** + * hlist_bl_for_each_entry - iterate over list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + */ +#define hlist_bl_for_each_entry(tpos, pos, head, member) \ + for (pos = hlist_bl_first(head); \ + pos && \ + ({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_bl_for_each_entry_safe - iterate over list of given type safe against removal of list entry + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @n: another &struct hlist_node to use as temporary storage + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_bl_for_each_entry_safe(tpos, pos, n, head, member) \ + for (pos = hlist_bl_first(head); \ + pos && ({ n = pos->next; 1; }) && \ + ({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \ + pos = n) + +#endif diff --git a/include/linux/rculist_bl.h b/include/linux/rculist_bl.h new file mode 100644 index 000000000000..b872b493724d --- /dev/null +++ b/include/linux/rculist_bl.h @@ -0,0 +1,127 @@ +#ifndef _LINUX_RCULIST_BL_H +#define _LINUX_RCULIST_BL_H + +/* + * RCU-protected bl list version. See include/linux/list_bl.h. + */ +#include +#include + +static inline void hlist_bl_set_first_rcu(struct hlist_bl_head *h, + struct hlist_bl_node *n) +{ + LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK); + LIST_BL_BUG_ON(!((unsigned long)h->first & LIST_BL_LOCKMASK)); + rcu_assign_pointer(h->first, + (struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK)); +} + +static inline struct hlist_bl_node *hlist_bl_first_rcu(struct hlist_bl_head *h) +{ + return (struct hlist_bl_node *) + ((unsigned long)rcu_dereference(h->first) & ~LIST_BL_LOCKMASK); +} + +/** + * hlist_bl_del_init_rcu - deletes entry from hash list with re-initialization + * @n: the element to delete from the hash list. + * + * Note: hlist_bl_unhashed() on the node returns true after this. It is + * useful for RCU based read lockfree traversal if the writer side + * must know if the list entry is still hashed or already unhashed. + * + * In particular, it means that we can not poison the forward pointers + * that may still be used for walking the hash list and we can only + * zero the pprev pointer so list_unhashed() will return true after + * this. + * + * The caller must take whatever precautions are necessary (such as + * holding appropriate locks) to avoid racing with another + * list-mutation primitive, such as hlist_bl_add_head_rcu() or + * hlist_bl_del_rcu(), running on this same list. However, it is + * perfectly legal to run concurrently with the _rcu list-traversal + * primitives, such as hlist_bl_for_each_entry_rcu(). + */ +static inline void hlist_bl_del_init_rcu(struct hlist_bl_node *n) +{ + if (!hlist_bl_unhashed(n)) { + __hlist_bl_del(n); + n->pprev = NULL; + } +} + +/** + * hlist_bl_del_rcu - deletes entry from hash list without re-initialization + * @n: the element to delete from the hash list. + * + * Note: hlist_bl_unhashed() on entry does not return true after this, + * the entry is in an undefined state. It is useful for RCU based + * lockfree traversal. + * + * In particular, it means that we can not poison the forward + * pointers that may still be used for walking the hash list. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_bl_add_head_rcu() + * or hlist_bl_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_bl_for_each_entry(). + */ +static inline void hlist_bl_del_rcu(struct hlist_bl_node *n) +{ + __hlist_bl_del(n); + n->pprev = LIST_POISON2; +} + +/** + * hlist_bl_add_head_rcu + * @n: the element to add to the hash list. + * @h: the list to add to. + * + * Description: + * Adds the specified element to the specified hlist_bl, + * while permitting racing traversals. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_bl_add_head_rcu() + * or hlist_bl_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_bl_for_each_entry_rcu(), used to prevent memory-consistency + * problems on Alpha CPUs. Regardless of the type of CPU, the + * list-traversal primitive must be guarded by rcu_read_lock(). + */ +static inline void hlist_bl_add_head_rcu(struct hlist_bl_node *n, + struct hlist_bl_head *h) +{ + struct hlist_bl_node *first; + + /* don't need hlist_bl_first_rcu because we're under lock */ + first = hlist_bl_first(h); + + n->next = first; + if (first) + first->pprev = &n->next; + n->pprev = &h->first; + + /* need _rcu because we can have concurrent lock free readers */ + hlist_bl_set_first_rcu(h, n); +} +/** + * hlist_bl_for_each_entry_rcu - iterate over rcu list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_bl_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_bl_node within the struct. + * + */ +#define hlist_bl_for_each_entry_rcu(tpos, pos, head, member) \ + for (pos = hlist_bl_first_rcu(head); \ + pos && \ + ({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1; }); \ + pos = rcu_dereference_raw(pos->next)) + +#endif -- cgit v1.2.3 From 626d607435617cc0f033522083e2bb195b81813c Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:50:04 +1100 Subject: bit_spinlock: add required includes Signed-off-by: Nick Piggin --- include/linux/bit_spinlock.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/bit_spinlock.h b/include/linux/bit_spinlock.h index 7113a32a86ea..e612575a2596 100644 --- a/include/linux/bit_spinlock.h +++ b/include/linux/bit_spinlock.h @@ -1,6 +1,10 @@ #ifndef __LINUX_BIT_SPINLOCK_H #define __LINUX_BIT_SPINLOCK_H +#include +#include +#include + /* * bit-based spin_lock() * -- cgit v1.2.3 From ceb5bdc2d246f6d81cf61ed70f325308a11821d2 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:50:05 +1100 Subject: fs: dcache per-bucket dcache hash locking We can turn the dcache hash locking from a global dcache_hash_lock into per-bucket locking. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 3 ++- include/linux/fs.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 8b2064d02928..5f0392ef759b 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -95,7 +96,7 @@ struct dentry { /* RCU lookup touched fields */ unsigned int d_flags; /* protected by d_lock */ seqcount_t d_seq; /* per dentry seqlock */ - struct hlist_node d_hash; /* lookup hash list */ + struct hlist_bl_node d_hash; /* lookup hash list */ struct dentry *d_parent; /* parent directory */ struct qstr d_name; struct inode *d_inode; /* Where the name belongs to - NULL is diff --git a/include/linux/fs.h b/include/linux/fs.h index d5a4d42f655b..baf3e556ff0e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -392,6 +392,7 @@ struct inodes_stat_t { #include #include #include +#include #include #include @@ -1377,7 +1378,7 @@ struct super_block { const struct xattr_handler **s_xattr; struct list_head s_inodes; /* all inodes */ - struct hlist_head s_anon; /* anonymous dentries for (nfs) exporting */ + struct hlist_bl_head s_anon; /* anonymous dentries for (nfs) exporting */ #ifdef CONFIG_SMP struct list_head __percpu *s_files; #else -- cgit v1.2.3 From 873feea09ebc980cbd3631b767356ce1eee65ec1 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:50:06 +1100 Subject: fs: dcache per-inode inode alias locking dcache_inode_lock can be replaced with per-inode locking. Use existing inode->i_lock for this. This is slightly non-trivial because we sometimes need to find the inode from the dentry, which requires d_inode to be stabilised (either with refcount or d_lock). Signed-off-by: Nick Piggin --- include/linux/dcache.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 5f0392ef759b..d719e4de8046 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -191,7 +191,6 @@ struct dentry_operations { #define DCACHE_OP_REVALIDATE 0x4000 #define DCACHE_OP_DELETE 0x8000 -extern spinlock_t dcache_inode_lock; extern seqlock_t rename_lock; static inline int dname_external(struct dentry *dentry) -- cgit v1.2.3 From 4b936885ab04dc6e0bb0ef35e0e23c1a7364d9e5 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:50:07 +1100 Subject: fs: improve scalability of pseudo filesystems Regardless of how much we possibly try to scale dcache, there is likely always going to be some fundamental contention when adding or removing children under the same parent. Pseudo filesystems do not seem need to have connected dentries because by definition they are disconnected. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index d719e4de8046..c0a2ca97c72f 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -211,6 +211,7 @@ extern void d_set_d_op(struct dentry *dentry, const struct dentry_operations *op /* allocate/de-allocate */ extern struct dentry * d_alloc(struct dentry *, const struct qstr *); +extern struct dentry * d_alloc_pseudo(struct super_block *, const struct qstr *); extern struct dentry * d_splice_alias(struct inode *, struct dentry *); extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *); extern struct dentry * d_obtain_alias(struct inode *); -- cgit v1.2.3 From 9d55c369bb5e695e629bc35cba2ef607755b3bee Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:50:09 +1100 Subject: fs: implement faster dentry memcmp The standard memcmp function on a Westmere system shows up hot in profiles in the `git diff` workload (both parallel and single threaded), and it is likely due to the costs associated with trapping into microcode, and little opportunity to improve memory access (dentry name is not likely to take up more than a cacheline). So replace it with an open-coded byte comparison. This increases code size by 8 bytes in the critical __d_lookup_rcu function, but the speedup is huge, averaging 10 runs of each: git diff st user sys elapsed CPU before 1.15 2.57 3.82 97.1 after 1.14 2.35 3.61 96.8 git diff mt user sys elapsed CPU before 1.27 3.85 1.46 349 after 1.26 3.54 1.43 333 Elapsed time for single threaded git diff at 95.0% confidence: -0.21 +/- 0.01 -5.45% +/- 0.24% It's -0.66% +/- 0.06% elapsed time on my Opteron, so rep cmp costs on the fam10h seem to be relatively smaller, but there is still a win. Signed-off-by: Nick Piggin --- include/linux/dcache.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index c0a2ca97c72f..bd07758943e0 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -47,6 +47,27 @@ struct dentry_stat_t { }; extern struct dentry_stat_t dentry_stat; +/* + * Compare 2 name strings, return 0 if they match, otherwise non-zero. + * The strings are both count bytes long, and count is non-zero. + */ +static inline int dentry_cmp(const unsigned char *cs, size_t scount, + const unsigned char *ct, size_t tcount) +{ + int ret; + if (scount != tcount) + return 1; + do { + ret = (*cs != *ct); + if (ret) + break; + cs++; + ct++; + tcount--; + } while (tcount); + return ret; +} + /* Name hashing routines. Initial hash value */ /* Hash courtesy of the R5 hash in reiserfs modulo sign bits */ #define init_name_hash() 0 -- cgit v1.2.3 From b3e19d924b6eaf2ca7d22cba99a517c5171007b6 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Jan 2011 17:50:11 +1100 Subject: fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin --- include/linux/mount.h | 53 +++++++++++++++++---------------------------------- include/linux/path.h | 2 ++ 2 files changed, 19 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/include/linux/mount.h b/include/linux/mount.h index 5e7a59408dd4..1869ea24a739 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -13,6 +13,7 @@ #include #include #include +#include #include struct super_block; @@ -46,12 +47,24 @@ struct mnt_namespace; #define MNT_INTERNAL 0x4000 +struct mnt_pcp { + int mnt_count; + int mnt_writers; +}; + struct vfsmount { struct list_head mnt_hash; struct vfsmount *mnt_parent; /* fs we are mounted on */ struct dentry *mnt_mountpoint; /* dentry of mountpoint */ struct dentry *mnt_root; /* root of the mounted tree */ struct super_block *mnt_sb; /* pointer to superblock */ +#ifdef CONFIG_SMP + struct mnt_pcp __percpu *mnt_pcp; + atomic_t mnt_longrefs; +#else + int mnt_count; + int mnt_writers; +#endif struct list_head mnt_mounts; /* list of children, anchored here */ struct list_head mnt_child; /* and going through their mnt_child */ int mnt_flags; @@ -70,57 +83,25 @@ struct vfsmount { struct mnt_namespace *mnt_ns; /* containing namespace */ int mnt_id; /* mount identifier */ int mnt_group_id; /* peer group identifier */ - /* - * We put mnt_count & mnt_expiry_mark at the end of struct vfsmount - * to let these frequently modified fields in a separate cache line - * (so that reads of mnt_flags wont ping-pong on SMP machines) - */ - atomic_t mnt_count; int mnt_expiry_mark; /* true if marked for expiry */ int mnt_pinned; int mnt_ghosts; -#ifdef CONFIG_SMP - int __percpu *mnt_writers; -#else - int mnt_writers; -#endif }; -static inline int *get_mnt_writers_ptr(struct vfsmount *mnt) -{ -#ifdef CONFIG_SMP - return mnt->mnt_writers; -#else - return &mnt->mnt_writers; -#endif -} - -static inline struct vfsmount *mntget(struct vfsmount *mnt) -{ - if (mnt) - atomic_inc(&mnt->mnt_count); - return mnt; -} - struct file; /* forward dec */ extern int mnt_want_write(struct vfsmount *mnt); extern int mnt_want_write_file(struct file *file); extern int mnt_clone_write(struct vfsmount *mnt); extern void mnt_drop_write(struct vfsmount *mnt); -extern void mntput_no_expire(struct vfsmount *mnt); +extern void mntput(struct vfsmount *mnt); +extern struct vfsmount *mntget(struct vfsmount *mnt); +extern void mntput_long(struct vfsmount *mnt); +extern struct vfsmount *mntget_long(struct vfsmount *mnt); extern void mnt_pin(struct vfsmount *mnt); extern void mnt_unpin(struct vfsmount *mnt); extern int __mnt_is_readonly(struct vfsmount *mnt); -static inline void mntput(struct vfsmount *mnt) -{ - if (mnt) { - mnt->mnt_expiry_mark = 0; - mntput_no_expire(mnt); - } -} - extern struct vfsmount *do_kern_mount(const char *fstype, int flags, const char *name, void *data); diff --git a/include/linux/path.h b/include/linux/path.h index edc98dec6266..a581e8c06533 100644 --- a/include/linux/path.h +++ b/include/linux/path.h @@ -10,7 +10,9 @@ struct path { }; extern void path_get(struct path *); +extern void path_get_long(struct path *); extern void path_put(struct path *); +extern void path_put_long(struct path *); static inline int path_equal(const struct path *path1, const struct path *path2) { -- cgit v1.2.3 From 07e06b011db2b3300f6c975ebf293fc4c8c59942 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 7 Jan 2011 15:17:36 +0800 Subject: sched: Consolidate the name of root_task_group and init_task_group root_task_group is the leftover of USER_SCHED, now it's always same to init_task_group. But as Mike suggested, root_task_group is maybe the suitable name to keep for a tree. So in this patch: init_task_group --> root_task_group init_task_group_load --> root_task_group_load INIT_TASK_GROUP_LOAD --> ROOT_TASK_GROUP_LOAD Suggested-by: Mike Galbraith Signed-off-by: Yong Zhang Signed-off-by: Peter Zijlstra LKML-Reference: <20110107071736.GA32635@windriver.com> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index 777cd01e240e..341acbbc434a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2511,7 +2511,7 @@ extern void normalize_rt_tasks(void); #ifdef CONFIG_CGROUP_SCHED -extern struct task_group init_task_group; +extern struct task_group root_task_group; extern struct task_group *sched_create_group(struct task_group *parent); extern void sched_destroy_group(struct task_group *tg); -- cgit v1.2.3 From c97415a72521071c235e0879f9a600014afd87b1 Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Fri, 26 Nov 2010 19:57:29 +0000 Subject: sysfs: Introducing binary attributes for struct class Added dev_bin_attrs to struct class similar to existing dev_attrs. Signed-off-by: Stefan Achatz Acked-by: Greg Kroah-Hartman Signed-off-by: Jiri Kosina --- include/linux/device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index dd4895313468..032bdb5406a2 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -197,6 +197,7 @@ struct class { struct class_attribute *class_attrs; struct device_attribute *dev_attrs; + struct bin_attribute *dev_bin_attrs; struct kobject *dev_kobj; int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env); -- cgit v1.2.3 From a081748735c5feb96b1365e78a5ff0fb6ca7e3a4 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 8 Jan 2011 21:42:42 -0700 Subject: of/flattree: forward declare struct device_node in of_fdt.h This patch forward declares struct device_node to fix a compile error when of_fdt.h is included, but of.h is not. Alternately, including linux/of.h could have been added to of_fdt.h, but that pulls in a lot of unnecessary declarations when only working with the flattened form. Signed-off-by: Grant Likely --- include/linux/of_fdt.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index ee96091f7d25..0ef22a1f129e 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -59,6 +59,8 @@ struct boot_param_header { #if defined(CONFIG_OF_FLATTREE) +struct device_node; + /* For scanning an arbitrary device-tree at any time */ extern char *of_fdt_get_string(struct boot_param_header *blob, u32 offset); extern void *of_fdt_get_property(struct boot_param_header *blob, -- cgit v1.2.3 From 6099469805c24af14250e182bb9ca082b8a6b716 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 9 Jan 2011 09:31:39 -0500 Subject: hwmon: Support for Dallas Semiconductor DS620 Driver for Dallas Semiconductor DS620 temperature sensor and thermostat Signed-off-by: Roland Stigge Signed-off-by: Guenter Roeck --- include/linux/i2c/ds620.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 include/linux/i2c/ds620.h (limited to 'include') diff --git a/include/linux/i2c/ds620.h b/include/linux/i2c/ds620.h new file mode 100644 index 000000000000..736bb87ac0fc --- /dev/null +++ b/include/linux/i2c/ds620.h @@ -0,0 +1,21 @@ +#ifndef _LINUX_DS620_H +#define _LINUX_DS620_H + +#include +#include + +/* platform data for the DS620 temperature sensor and thermostat */ + +struct ds620_platform_data { + /* + * Thermostat output pin PO mode: + * 0 = always low (default) + * 1 = PO_LOW + * 2 = PO_HIGH + * + * (see Documentation/hwmon/ds620) + */ + int pomode; +}; + +#endif /* _LINUX_DS620_H */ -- cgit v1.2.3 From 2a8c0c68487a68441e701f493f43fd547d87c8df Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 8 Jan 2011 19:37:20 -0800 Subject: fs: fix dcache.h kernel-doc notation Fix new kernel-doc notation warning in dcache.h: Warning(include/linux/dcache.h:316): Excess function parameter 'Returns' description in '__d_rcu_to_refcount' Signed-off-by: Randy Dunlap Cc: Nick Piggin Signed-off-by: Linus Torvalds --- include/linux/dcache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index bd07758943e0..59fcd24b1468 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -307,7 +307,7 @@ extern struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name, * __d_rcu_to_refcount - take a refcount on dentry if sequence check is ok * @dentry: dentry to take a ref on * @seq: seqcount to verify against - * @Returns: 0 on failure, else 1. + * Returns: 0 on failure, else 1. * * __d_rcu_to_refcount operates on a dentry,seq pair that was returned * by __d_lookup_rcu, to get a reference on an rcu-walk dentry. -- cgit v1.2.3 From 175881db8916a5f5cdf920d32214caef588870fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 8 Jan 2011 19:38:02 -0800 Subject: hrtimer.h: fix kernel-doc warning Fix new kernel-doc notation warning in hrtimer.h: Warning(include/linux/hrtimer.h:150): Excess struct/union/enum/typedef member 'first' description in 'hrtimer_clock_base' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- include/linux/hrtimer.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 330586ffffbb..f376ddc64c4d 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -131,7 +131,6 @@ struct hrtimer_sleeper { * @index: clock type index for per_cpu support when moving a * timer to a base on another cpu. * @active: red black tree root node for the active timers - * @first: pointer to the timer node which expires first * @resolution: the resolution of the clock, in nanoseconds * @get_time: function to retrieve the current time of the clock * @softirq_time: the time when running the hrtimer queue in the softirq -- cgit v1.2.3 From 0dc1488527a3c01383a50e5df7187219567586a3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 8 Jan 2011 19:40:33 -0800 Subject: pipe_fs_i.h: fix kernel-doc warning Fix kernel-doc notation warnings in pipe_fs_i.h: Warning(include/linux/pipe_fs_i.h:58): No description found for parameter 'buffers' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- include/linux/pipe_fs_i.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index bb27d7ec2fb9..77257c92155a 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -30,6 +30,7 @@ struct pipe_buffer { * struct pipe_inode_info - a linux kernel pipe * @wait: reader/writer wait point in case of empty/full pipe * @nrbufs: the number of non-empty pipe buffers in this pipe + * @buffers: total number of buffers (should be a power of 2) * @curbuf: the current pipe buffer entry * @tmp_page: cached released page * @readers: number of current readers of this pipe -- cgit v1.2.3 From 37721e1b0cf98cb65895f234d8c500d270546529 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 10 Jan 2011 08:17:10 +0200 Subject: headers: path.h redux Remove path.h from sched.h and other files. Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/audit.h | 1 + include/linux/dcookies.h | 2 +- include/linux/sched.h | 1 - 3 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/audit.h b/include/linux/audit.h index 8b5c0620abf9..359df0487690 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -372,6 +372,7 @@ struct audit_buffer; struct audit_context; struct inode; struct netlink_skb_parms; +struct path; struct linux_binprm; struct mq_attr; struct mqstat; diff --git a/include/linux/dcookies.h b/include/linux/dcookies.h index 24c806f12a6c..5ac3bdd5cee6 100644 --- a/include/linux/dcookies.h +++ b/include/linux/dcookies.h @@ -13,10 +13,10 @@ #ifdef CONFIG_PROFILING #include -#include #include struct dcookie_user; +struct path; /** * dcookie_register - register a user of dcookies diff --git a/include/linux/sched.h b/include/linux/sched.h index 341acbbc434a..c118a7f203aa 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -70,7 +70,6 @@ struct sched_param { #include #include #include -#include #include #include #include -- cgit v1.2.3 From 57cc7215b70856dc6bae8e55b00ecd7b1d7429b1 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 10 Jan 2011 08:18:25 +0200 Subject: headers: kobject.h redux Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/firmware-map.h | 1 - include/linux/fs.h | 2 +- include/linux/sched.h | 1 - include/linux/sunrpc/cache.h | 1 + 4 files changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h index c6dcc1dfe781..43fe52fcef0f 100644 --- a/include/linux/firmware-map.h +++ b/include/linux/firmware-map.h @@ -17,7 +17,6 @@ #define _LINUX_FIRMWARE_MAP_H #include -#include /* * provide a dummy interface if CONFIG_FIRMWARE_MEMMAP is disabled diff --git a/include/linux/fs.h b/include/linux/fs.h index baf3e556ff0e..f84d9928bdb1 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -382,7 +382,6 @@ struct inodes_stat_t { #include #include #include -#include #include #include #include @@ -402,6 +401,7 @@ struct hd_geometry; struct iovec; struct nameidata; struct kiocb; +struct kobject; struct pipe_inode_info; struct poll_table_struct; struct kstatfs; diff --git a/include/linux/sched.h b/include/linux/sched.h index c118a7f203aa..abc527aa8550 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -87,7 +87,6 @@ struct sched_param { #include #include #include -#include #include #include diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 6950c981882d..78aa104250b7 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -13,6 +13,7 @@ #ifndef _LINUX_SUNRPC_CACHE_H_ #define _LINUX_SUNRPC_CACHE_H_ +#include #include #include #include -- cgit v1.2.3 From 1a7d946993aaf2a79e9c65abbe169a108e351bcb Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Sat, 8 Jan 2011 18:47:29 +0900 Subject: sony-laptop: support new hotkeys on the P, Z and EC series Add new mappings for assist, VAIO, zoom and eject buttons present on refurbished P, Z and EC models. Reported-by: Gyorgy Jeney Reported-by: Stephan Mueller Cc: Dmitry Torokhov Cc: Matthew Garrett Signed-off-by: Mattia Dongili Signed-off-by: Matthew Garrett --- include/linux/sonypi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h index 4f95c1aac2fd..0e6dc3891942 100644 --- a/include/linux/sonypi.h +++ b/include/linux/sonypi.h @@ -112,6 +112,7 @@ #define SONYPI_EVENT_VOLUME_DEC_PRESSED 70 #define SONYPI_EVENT_BRIGHTNESS_PRESSED 71 #define SONYPI_EVENT_MEDIA_PRESSED 72 +#define SONYPI_EVENT_VENDOR_PRESSED 73 /* get/set brightness */ #define SONYPI_IOCGBRT _IOR('v', 0, __u8) -- cgit v1.2.3