From c0dd3460b28626430b83b9bf80af4c5a2bd4a53b Mon Sep 17 00:00:00 2001 From: Joonas Lahtinen Date: Fri, 22 Apr 2016 13:29:26 +0300 Subject: drm/i915: Canonicalize stolen memory calculations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the better constructs/comments from i915_gem_stolen.c to early-quirks.c and increase readability in preparation of only having one set of functions. - intel_stolen_base -> gen3_stolen_base - use phys_addr_t instead of u32 for address for future proofing v2: - Print the invalid register values (Chris) (Omitting the register prefix as it's visible from backtrace.) Cc: Chris Wilson Cc: Mika Kuoppala Cc: Ville Syrjälä Cc: Tvrtko Ursulin Acked-by: Tvrtko Ursulin Reviewed-by: Chris Wilson Signed-off-by: Joonas Lahtinen --- include/drm/i915_drm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 595f85c392ac..b1755f8db36b 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -92,4 +92,7 @@ extern bool i915_gpu_turbo_disable(void); #define I845_TSEG_SIZE_512K (2 << 1) #define I845_TSEG_SIZE_1M (3 << 1) +#define INTEL_BSM 0x5c +#define INTEL_BSM_MASK (0xFFFF << 20) + #endif /* _I915_DRM_H_ */ -- cgit v1.2.3 From 4e382db36cf50969f6bafb1ac99ae6c3f5bf5568 Mon Sep 17 00:00:00 2001 From: Yetunde Adebisi Date: Tue, 5 Apr 2016 15:10:50 +0100 Subject: drm/dp: Add definition for Display Control DPCD Registers capability size This is used when reading Display Control capability Registers on the sink device. cc: dri-devel@lists.freedesktop.org Signed-off-by: Yetunde Adebisi Reviewed-by: Jani Nikula Acked-by: Dave Airlie Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-2-git-send-email-yetundex.adebisi@intel.com --- include/drm/drm_dp_helper.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 1252108da0ef..92d9a5258e6d 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -621,6 +621,7 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI #define DP_BRANCH_OUI_HEADER_SIZE 0xc #define DP_RECEIVER_CAP_SIZE 0xf #define EDP_PSR_RECEIVER_CAP_SIZE 2 +#define EDP_DISPLAY_CTL_CAP_SIZE 3 void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]); void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]); -- cgit v1.2.3 From d8dab00de9b767eaa11496a0eedf4798fc225803 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 28 Apr 2016 09:56:37 +0100 Subject: io-mapping: Specify mapping size for io_mapping_map_wc() The ioremap() hidden behind the io_mapping_map_wc() convenience helper can be used for remapping multiple pages. Extend the helper so that future callers can use it for larger ranges. Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Daniel Vetter Cc: Jani Nikula Cc: David Airlie Cc: Yishai Hadas Cc: Dan Williams Cc: Ingo Molnar Cc: "Peter Zijlstra (Intel)" Cc: David Hildenbrand Cc: Luis R. Rodriguez Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Luis R. Rodriguez Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-3-git-send-email-chris@chris-wilson.co.uk --- include/linux/io-mapping.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index e399029b68c5..645ad06b5d52 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -100,14 +100,16 @@ io_mapping_unmap_atomic(void __iomem *vaddr) } static inline void __iomem * -io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) +io_mapping_map_wc(struct io_mapping *mapping, + unsigned long offset, + unsigned long size) { resource_size_t phys_addr; BUG_ON(offset >= mapping->size); phys_addr = mapping->base + offset; - return ioremap_wc(phys_addr, PAGE_SIZE); + return ioremap_wc(phys_addr, size); } static inline void @@ -155,7 +157,9 @@ io_mapping_unmap_atomic(void __iomem *vaddr) /* Non-atomic map/unmap */ static inline void __iomem * -io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) +io_mapping_map_wc(struct io_mapping *mapping, + unsigned long offset, + unsigned long size) { return ((char __force __iomem *) mapping) + offset; } -- cgit v1.2.3 From ede53344dbfd1dd43bfd73eb6af743d37c56a7c3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 6 May 2016 16:46:52 +0300 Subject: drm: Add helper for DP++ adaptors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a helper which aids in the identification of DP dual mode (aka. DP++) adaptors. There are several types of adaptors specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors may go as high as 300MHz and they provide a register informing the source device what the actual limit is. Supposedly also type 1 adaptors may optionally implement this register. This TMDS clock limit is the main reason why we need to identify these adaptors. Type 1 adaptors provide access to their internal registers and the sink DDC bus through I2C. Type 2 adaptors provide this access both via I2C and I2C-over-AUX. A type 2 source device may choose to implement either of these methods. If a source device implements the I2C-over-AUX method, then the driver will obviously need specific support for such adaptors since the port is driven like an HDMI port, but DDC communication happes over the AUX channel. This helper should be enough to identify the adaptor type (some type 1 DVI adaptors may be a slight exception) and the maximum TMDS clock limit. Another feature that may be available is control over the TMDS output buffers on the adaptor, possibly allowing for some power saving when the TMDS link is down. Other user controllable features that may be available in the adaptors are downstream i2c bus speed control when using i2c-over-aux, and some control over the CEC pin. I chose not to provide any helper functions for those since I have no use for them in i915 at this time. The rest of the registers in the adaptor are mostly just information, eg. IEEE OUI, hardware and firmware revision, etc. v2: Pass adaptor type to helper functions to ease driver implementation Fix a bunch of typoes (Paulo) Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know the type (Paulo) Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo) Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to ease future LSPCON enabling Remove the unused DP_DUAL_MODE_LAST_RESERVED define v3: Fix kernel doc function argument descriptions (Jani) s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs Add kernel doc for enum drm_dp_dual_mode_type Actually build the docs Fix more typoes v4: Adjust code indentation of type2 adaptor detection (Shashank) Add debug messages for failurs cases (Shashank) v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo) Cc: stable@vger.kernel.org Cc: Tore Anderson Cc: Paulo Zanoni Cc: Shashank Sharma Cc: Daniel Vetter Cc: Shashank Sharma Signed-off-by: Ville Syrjälä Reviewed-by: Shashank Sharma (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com --- include/drm/drm_dp_dual_mode_helper.h | 92 +++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 include/drm/drm_dp_dual_mode_helper.h (limited to 'include') diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h new file mode 100644 index 000000000000..e8a9dfd0e055 --- /dev/null +++ b/include/drm/drm_dp_dual_mode_helper.h @@ -0,0 +1,92 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_DP_DUAL_MODE_HELPER_H +#define DRM_DP_DUAL_MODE_HELPER_H + +#include + +/* + * Optional for type 1 DVI adaptors + * Mandatory for type 1 HDMI and type 2 adaptors + */ +#define DP_DUAL_MODE_HDMI_ID 0x00 /* 00-0f */ +#define DP_DUAL_MODE_HDMI_ID_LEN 16 +/* + * Optional for type 1 adaptors + * Mandatory for type 2 adaptors + */ +#define DP_DUAL_MODE_ADAPTOR_ID 0x10 +#define DP_DUAL_MODE_REV_MASK 0x07 +#define DP_DUAL_MODE_REV_TYPE2 0x00 +#define DP_DUAL_MODE_TYPE_MASK 0xf0 +#define DP_DUAL_MODE_TYPE_TYPE2 0xa0 +#define DP_DUAL_MODE_IEEE_OUI 0x11 /* 11-13*/ +#define DP_DUAL_IEEE_OUI_LEN 3 +#define DP_DUAL_DEVICE_ID 0x14 /* 14-19 */ +#define DP_DUAL_DEVICE_ID_LEN 6 +#define DP_DUAL_MODE_HARDWARE_REV 0x1a +#define DP_DUAL_MODE_FIRMWARE_MAJOR_REV 0x1b +#define DP_DUAL_MODE_FIRMWARE_MINOR_REV 0x1c +#define DP_DUAL_MODE_MAX_TMDS_CLOCK 0x1d +#define DP_DUAL_MODE_I2C_SPEED_CAP 0x1e +#define DP_DUAL_MODE_TMDS_OEN 0x20 +#define DP_DUAL_MODE_TMDS_DISABLE 0x01 +#define DP_DUAL_MODE_HDMI_PIN_CTRL 0x21 +#define DP_DUAL_MODE_CEC_ENABLE 0x01 +#define DP_DUAL_MODE_I2C_SPEED_CTRL 0x22 + +struct i2c_adapter; + +ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter, + u8 offset, void *buffer, size_t size); +ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter, + u8 offset, const void *buffer, size_t size); + +/** + * enum drm_dp_dual_mode_type - Type of the DP dual mode adaptor + * @DRM_DP_DUAL_MODE_NONE: No DP dual mode adaptor + * @DRM_DP_DUAL_MODE_UNKNOWN: Could be either none or type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_DVI: Type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_HDMI: Type 1 HDMI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_DVI: Type 2 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_HDMI: Type 2 HDMI adaptor + */ +enum drm_dp_dual_mode_type { + DRM_DP_DUAL_MODE_NONE, + DRM_DP_DUAL_MODE_UNKNOWN, + DRM_DP_DUAL_MODE_TYPE1_DVI, + DRM_DP_DUAL_MODE_TYPE1_HDMI, + DRM_DP_DUAL_MODE_TYPE2_DVI, + DRM_DP_DUAL_MODE_TYPE2_HDMI, +}; + +enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter); +int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter); +int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool *enabled); +int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool enable); +const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type); + +#endif -- cgit v1.2.3 From e780027d7a639faff95de8a95c83608c71377258 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 May 2016 12:56:15 +0300 Subject: drm/omap: remove unused enum omap_hdmi_flags 'enum omap_hdmi_flags' is not used anywhere, remove it. Signed-off-by: Tomi Valkeinen --- include/video/omapdss.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 8e14ad7327c9..5b51789259c8 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -210,10 +210,6 @@ enum omap_dss_clk_source { OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI, /* OMAP4: PLL2_CLK2 */ }; -enum omap_hdmi_flags { - OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP = 1 << 0, -}; - enum omap_dss_output_id { OMAP_DSS_OUTPUT_DPI = 1 << 0, OMAP_DSS_OUTPUT_DBI = 1 << 1, -- cgit v1.2.3 From af61d5ce1532191213dce2404f9c45d32260a6cd Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Tue, 17 May 2016 15:07:44 +0200 Subject: drm/core: Add drm_accurate_vblank_count, v5. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This function is useful for gen2 intel devices which have no frame counter, but need a way to determine the current vblank count without racing with the vblank interrupt handler. intel_pipe_update_start checks if no vblank interrupt will occur during vblank evasion, but cannot check whether the vblank handler has run to completion. This function uses the timestamps to determine when the last vblank has happened, and interpolates from there. Changes since v1: - Take vblank_time_lock and don't use drm_vblank_count_and_time. Changes since v2: - Don't return time of last vblank. Changes since v3: - Change pipe to unsigned int. (Ville) - Remove unused documentation for tv_ret. (kbuild) Changes since v4: - Add warning to docs when the function is useful. - Add a WARN_ON when get_vblank_timestamp is unavailable. - Use drm_vblank_count. Cc: Mario Kleiner Cc: Ville Syrjälä Signed-off-by: Maarten Lankhorst Reviewed-by: Ville Syrjälä #v4 Acked-by: David Airlie #irc, v4 Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-2-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Mario Kleiner --- include/drm/drmP.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 360b2a74e1ef..ed890384b938 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1002,6 +1002,7 @@ extern void drm_crtc_vblank_off(struct drm_crtc *crtc); extern void drm_crtc_vblank_reset(struct drm_crtc *crtc); extern void drm_crtc_vblank_on(struct drm_crtc *crtc); extern void drm_vblank_cleanup(struct drm_device *dev); +extern u32 drm_accurate_vblank_count(struct drm_crtc *crtc); extern u32 drm_vblank_no_hw_counter(struct drm_device *dev, unsigned int pipe); extern int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, -- cgit v1.2.3 From 0faee62d78c58ec6cb428b9444e3c12e3391a5de Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 May 2016 13:02:16 +0300 Subject: drm/omap: remove unused enum omap_overlay_manager_caps 'enum omap_overlay_manager_caps' is not used anywhere, remove it. Signed-off-by: Tomi Valkeinen --- include/video/omapdss.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include') diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 5b51789259c8..e4942d046f96 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -195,10 +195,6 @@ enum omap_overlay_caps { OMAP_DSS_OVL_CAP_REPLICATION = 1 << 5, }; -enum omap_overlay_manager_caps { - OMAP_DSS_DUMMY_VALUE, /* add a dummy value to prevent compiler error */ -}; - enum omap_dss_clk_source { OMAP_DSS_CLK_SRC_FCK = 0, /* OMAP2/3: DSS1_ALWON_FCLK * OMAP4: DSS_FCLK */ @@ -459,7 +455,6 @@ struct omap_overlay_manager { /* static fields */ const char *name; enum omap_channel id; - enum omap_overlay_manager_caps caps; struct list_head overlays; enum omap_display_type supported_displays; enum omap_dss_output_id supported_outputs; -- cgit v1.2.3 From be5d7319543477eb279c184e22b380ba5616b079 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 May 2016 13:31:14 +0300 Subject: drm/omap: copy enum omap_dss_clk_source At the moment 'enum omap_dss_clk_source' is in omapdss.h, shared by omapdrm and omapfb. We're about to improve the omapdrm clock code, so we need to make a separate copy of the enum for each driver. Signed-off-by: Tomi Valkeinen --- include/video/omapdss.h | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'include') diff --git a/include/video/omapdss.h b/include/video/omapdss.h index e4942d046f96..6bd9d03b1030 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -195,17 +195,6 @@ enum omap_overlay_caps { OMAP_DSS_OVL_CAP_REPLICATION = 1 << 5, }; -enum omap_dss_clk_source { - OMAP_DSS_CLK_SRC_FCK = 0, /* OMAP2/3: DSS1_ALWON_FCLK - * OMAP4: DSS_FCLK */ - OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC, /* OMAP3: DSI1_PLL_FCLK - * OMAP4: PLL1_CLK1 */ - OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI, /* OMAP3: DSI2_PLL_FCLK - * OMAP4: PLL1_CLK2 */ - OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC, /* OMAP4: PLL2_CLK1 */ - OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI, /* OMAP4: PLL2_CLK2 */ -}; - enum omap_dss_output_id { OMAP_DSS_OUTPUT_DPI = 1 << 0, OMAP_DSS_OUTPUT_DBI = 1 << 1, -- cgit v1.2.3 From d4055a9b207966ab4058550d818532b979d8bf78 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 10 May 2016 15:21:28 +0100 Subject: drm: use seqlock for vblank time/count MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch aims to replace the roll-your-own seqlock implementation with full-blown seqlock'. We also remove the timestamp ring-buffer in favour of single timestamp/count pair protected by a seqlock. In turn this means we can now increment the vblank freely without the need for clamping. v2: - reduce the scope of the seqlock, keeping vblank_time_lock - make the seqlock per vblank_crtc, so multiple readers aren't blocked by the writer Cc: Mario Kleiner Cc: Daniel Vetter Cc: Ville Syrjälä Signed-off-by: Matthew Auld Reviewed-by: Ville Syrjälä Reviewed-by: Mario Kleiner Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1462890088-18194-1-git-send-email-matthew.auld@intel.com --- include/drm/drmP.h | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 84f1a8eefbdb..af8b71b2e5bd 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -52,6 +52,7 @@ #include #include #include +#include #include #include #include @@ -392,11 +393,6 @@ struct drm_master { void *driver_priv; }; -/* Size of ringbuffer for vblank timestamps. Just double-buffer - * in initial implementation. - */ -#define DRM_VBLANKTIME_RBSIZE 2 - /* Flags and return codes for get_vblank_timestamp() driver function. */ #define DRM_CALLED_FROM_VBLIRQ 1 #define DRM_VBLANKTIME_SCANOUTPOS_METHOD (1 << 0) @@ -725,10 +721,10 @@ struct drm_vblank_crtc { wait_queue_head_t queue; /**< VBLANK wait queue */ struct timer_list disable_timer; /* delayed disable timer */ - /* vblank counter, protected by dev->vblank_time_lock for writes */ - u32 count; - /* vblank timestamps, protected by dev->vblank_time_lock for writes */ - struct timeval time[DRM_VBLANKTIME_RBSIZE]; + seqlock_t seqlock; /* protects vblank count and time */ + + u32 count; /* vblank counter */ + struct timeval time; /* vblank timestamp */ atomic_t refcount; /* number of users of vblank interruptsper crtc */ u32 last; /* protected by dev->vbl_lock, used */ -- cgit v1.2.3 From 2853908a59603118f854b813da055c26257dfa4f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 29 May 2016 13:49:56 -0400 Subject: undo "fs: allow d_instantiate to be called with negative parent dentry" Background: spufs used to mangle the order in which it had been building dentry trees. It was broken in a lot of ways, but most of them required the right timing to trigger until an fsnotify change had added one more - the one that was always triggered. Unfortunately, insteading of fixing their long-standing bug the spufs folks had chosen to paper over the fsnotify trigger. Eventually said bug had been spotted and killed off, but the pointless check in fsnotify has remained, complete with the implication that one *could* do that kind of crap. Again, a parent of any dentry should always be positive. Any code can rely upon that and anything violating that assert is a bug, *not* something to be accomodated. Signed-off-by: Al Viro --- include/linux/fsnotify_backend.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 29f917517299..d188a107c562 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -281,7 +281,7 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) * us with the new state. */ parent = dentry->d_parent; - if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode)) + if (fsnotify_inode_watches_children(parent->d_inode)) dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED; else dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED; -- cgit v1.2.3 From affda48410a5bbfd516def60bbc97f2683cd9f7b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 29 May 2016 18:35:12 -0400 Subject: trim fsnotify hooks a bit fsnotify_d_move()/__fsnotify_d_instantiate()/__fsnotify_update_dcache_flags() are identical to each other, regardless of the config. Signed-off-by: Al Viro --- include/linux/fsnotify.h | 12 ------------ include/linux/fsnotify_backend.h | 20 +++----------------- 2 files changed, 3 insertions(+), 29 deletions(-) (limited to 'include') diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 0141f257d67b..eed9e853a06f 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -51,18 +51,6 @@ static inline int fsnotify_perm(struct file *file, int mask) return fsnotify(inode, fsnotify_mask, path, FSNOTIFY_EVENT_PATH, NULL, 0); } -/* - * fsnotify_d_move - dentry has been moved - */ -static inline void fsnotify_d_move(struct dentry *dentry) -{ - /* - * On move we need to update dentry->d_flags to indicate if the new parent - * cares about events from this dentry. - */ - __fsnotify_update_dcache_flags(dentry); -} - /* * fsnotify_link_count - inode's link count changed */ diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index d188a107c562..58205f33af02 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -267,10 +267,8 @@ static inline int fsnotify_inode_watches_children(struct inode *inode) * Update the dentry with a flag indicating the interest of its parent to receive * filesystem events when those events happens to this dentry->d_inode. */ -static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) +static inline void fsnotify_update_flags(struct dentry *dentry) { - struct dentry *parent; - assert_spin_locked(&dentry->d_lock); /* @@ -280,21 +278,12 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) * find our entry, so it will spin until we complete here, and update * us with the new state. */ - parent = dentry->d_parent; - if (fsnotify_inode_watches_children(parent->d_inode)) + if (fsnotify_inode_watches_children(dentry->d_parent->d_inode)) dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED; else dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED; } -/* - * fsnotify_d_instantiate - instantiate a dentry for inode - */ -static inline void __fsnotify_d_instantiate(struct dentry *dentry) -{ - __fsnotify_update_dcache_flags(dentry); -} - /* called from fsnotify listeners, such as fanotify or dnotify */ /* create a new group */ @@ -386,10 +375,7 @@ static inline void __fsnotify_inode_delete(struct inode *inode) static inline void __fsnotify_vfsmount_delete(struct vfsmount *mnt) {} -static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) -{} - -static inline void __fsnotify_d_instantiate(struct dentry *dentry) +static inline void fsnotify_update_flags(struct dentry *dentry) {} static inline u32 fsnotify_get_cookie(void) -- cgit v1.2.3 From 79c530ed4dd374e51f3c8ff75134a1da201952b7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 19 May 2016 19:45:59 +0200 Subject: ARM: dts: r8a7794: Remove nonexistent thermal sensor clock According to the latest information, there is no thermal IP block present on the r8a7794 SoC. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- include/dt-bindings/clock/r8a7794-clock.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index 4d3ecd626c1f..a3491ba2f6ec 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -67,7 +67,6 @@ #define R8A7794_CLK_IRQC 7 /* MSTP5 */ -#define R8A7794_CLK_THERMAL 22 #define R8A7794_CLK_PWM 23 /* MSTP7 */ -- cgit v1.2.3 From 8d5b5d5ce58ee1b90110f4e358eefe3c3a6b08a2 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 1 May 2016 19:36:57 +0900 Subject: reset: add devm_reset_controller_register API Add a device managed API for reset_controller_register(). This helps in reducing code in .remove callbacks and sometimes dropping .remove callbacks entirely. Signed-off-by: Masahiro Yamada Acked-by: Laxman Dewangan Signed-off-by: Philipp Zabel --- include/linux/reset-controller.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h index b91ba932bbd4..db1fe6772ad5 100644 --- a/include/linux/reset-controller.h +++ b/include/linux/reset-controller.h @@ -53,4 +53,8 @@ struct reset_controller_dev { int reset_controller_register(struct reset_controller_dev *rcdev); void reset_controller_unregister(struct reset_controller_dev *rcdev); +struct device; +int devm_reset_controller_register(struct device *dev, + struct reset_controller_dev *rcdev); + #endif -- cgit v1.2.3 From 312521d0543513f37f0badb4efc7bfed2d99672e Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Tue, 24 May 2016 15:35:34 -0700 Subject: ACPI / NUMA: Move acpi_numa_arch_fixup() to ia64 only Since acpi_numa_arch_fixup() is only used in arch ia64, move it there to make a generic interface easier. This avoids empty function stubs or some complex kconfig options for x86 and arm64. Signed-off-by: Robert Richter Reviewed-by: Hanjun Guo Signed-off-by: David Daney Signed-off-by: Rafael J. Wysocki --- include/linux/acpi.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 288fac5294f5..8010b266e856 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -237,7 +237,6 @@ void acpi_numa_slit_init (struct acpi_table_slit *slit); void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa); int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); -void acpi_numa_arch_fixup(void); #ifndef PHYS_CPUID_INVALID typedef u32 phys_cpuid_t; -- cgit v1.2.3 From e84025e274e66986277e11f0dda03373e246ffad Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 24 May 2016 15:35:39 -0700 Subject: ACPI / NUMA: move bad_srat() and srat_disabled() to drivers/acpi/numa.c bad_srat() and srat_disabled() are shared by x86 and follow-on arm64 patches. Move them to drivers/acpi/numa.c in preparation for arm64 support. Signed-off-by: Hanjun Guo Signed-off-by: Robert Richter [david.daney@cavium.com moved definitions to drivers/acpi/numa.c] Signed-off-by: David Daney Signed-off-by: Rafael J. Wysocki --- include/acpi/acpi_numa.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h index 94a37cd7fbda..d4b72944ccda 100644 --- a/include/acpi/acpi_numa.h +++ b/include/acpi/acpi_numa.h @@ -15,6 +15,10 @@ extern int pxm_to_node(int); extern int node_to_pxm(int); extern int acpi_map_pxm_to_node(int); extern unsigned char acpi_srat_revision; +extern int acpi_numa __initdata; + +extern void bad_srat(void); +extern int srat_disabled(void); #endif /* CONFIG_ACPI_NUMA */ #endif /* __ACP_NUMA_H */ -- cgit v1.2.3 From fb7c2bae8a479e388a1f664e32d6ddca55c7a249 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 24 May 2016 15:35:43 -0700 Subject: ACPI / processor: Add acpi_map_madt_entry() Follow-on arm64 ACPI/NUMA patches need to map MADT entries very early (before kmalloc is usable). Add acpi_map_madt_entry() which, indirectly, uses early_memremap()/early_memunmap() to access the table and parse out the mpidr. The existing implementation of map_madt_entry() is modified to take a pointer to the MADT as a parameter and the callers adjusted. Signed-off-by: David Daney Acked-by: Catalin Marinas Signed-off-by: Rafael J. Wysocki --- include/acpi/processor.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 6f1805dd5d3c..f473e6618339 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -309,6 +309,7 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) /* in processor_core.c */ phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id); +phys_cpuid_t acpi_map_madt_entry(u32 acpi_id); int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id); int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id); -- cgit v1.2.3 From 4c5773f9f5462dcb372857813918bbfe8c0cdcdd Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 28 May 2016 11:54:12 +0200 Subject: dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Add license and copyrights (file introduced in 2014) to header with Exynos5410 clock IDs. Additionally reformat it to improve readability. Signed-off-by: Krzysztof Kozlowski Acked-by: Stephen Boyd Reviewed-by: Javier Martinez Canillas Signed-off-by: Sylwester Nawrocki --- include/dt-bindings/clock/exynos5410.h | 54 ++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 22 deletions(-) (limited to 'include') diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h index 9b180f032e2d..213f19e02870 100644 --- a/include/dt-bindings/clock/exynos5410.h +++ b/include/dt-bindings/clock/exynos5410.h @@ -1,33 +1,43 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants for Exynos5421 clock controller. +*/ + #ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H #define _DT_BINDINGS_CLOCK_EXYNOS_5410_H /* core clocks */ -#define CLK_FIN_PLL 1 -#define CLK_FOUT_APLL 2 -#define CLK_FOUT_CPLL 3 -#define CLK_FOUT_MPLL 4 -#define CLK_FOUT_BPLL 5 -#define CLK_FOUT_KPLL 6 +#define CLK_FIN_PLL 1 +#define CLK_FOUT_APLL 2 +#define CLK_FOUT_CPLL 3 +#define CLK_FOUT_MPLL 4 +#define CLK_FOUT_BPLL 5 +#define CLK_FOUT_KPLL 6 /* gate for special clocks (sclk) */ -#define CLK_SCLK_UART0 128 -#define CLK_SCLK_UART1 129 -#define CLK_SCLK_UART2 130 -#define CLK_SCLK_UART3 131 -#define CLK_SCLK_MMC0 132 -#define CLK_SCLK_MMC1 133 -#define CLK_SCLK_MMC2 134 +#define CLK_SCLK_UART0 128 +#define CLK_SCLK_UART1 129 +#define CLK_SCLK_UART2 130 +#define CLK_SCLK_UART3 131 +#define CLK_SCLK_MMC0 132 +#define CLK_SCLK_MMC1 133 +#define CLK_SCLK_MMC2 134 /* gate clocks */ -#define CLK_UART0 257 -#define CLK_UART1 258 -#define CLK_UART2 259 -#define CLK_UART3 260 -#define CLK_MCT 315 -#define CLK_MMC0 351 -#define CLK_MMC1 352 -#define CLK_MMC2 353 +#define CLK_UART0 257 +#define CLK_UART1 258 +#define CLK_UART2 259 +#define CLK_UART3 260 +#define CLK_MCT 315 +#define CLK_MMC0 351 +#define CLK_MMC1 352 +#define CLK_MMC2 353 -#define CLK_NR_CLKS 512 +#define CLK_NR_CLKS 512 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */ -- cgit v1.2.3 From 5cd3535a27a7cf8fc4070b499d66e419e7e72b61 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 28 May 2016 11:54:13 +0200 Subject: dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Add IDs for PWM and USB clocks to Exynos5410. Use the same number as for Exynos5420 just in case in future these drivers were merged. Signed-off-by: Krzysztof Kozlowski Acked-by: Stephen Boyd Reviewed-by: Javier Martinez Canillas Signed-off-by: Sylwester Nawrocki --- include/dt-bindings/clock/exynos5410.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h index 213f19e02870..34c8e96987a1 100644 --- a/include/dt-bindings/clock/exynos5410.h +++ b/include/dt-bindings/clock/exynos5410.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Copyright (c) 2016 Krzysztof Kozlowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -27,16 +28,25 @@ #define CLK_SCLK_MMC0 132 #define CLK_SCLK_MMC1 133 #define CLK_SCLK_MMC2 134 +#define CLK_SCLK_USBD300 150 +#define CLK_SCLK_USBD301 151 +#define CLK_SCLK_USBPHY300 152 +#define CLK_SCLK_USBPHY301 153 +#define CLK_SCLK_PWM 155 /* gate clocks */ #define CLK_UART0 257 #define CLK_UART1 258 #define CLK_UART2 259 #define CLK_UART3 260 +#define CLK_PWM 279 #define CLK_MCT 315 #define CLK_MMC0 351 #define CLK_MMC1 352 #define CLK_MMC2 353 +#define CLK_USBH20 365 +#define CLK_USBD300 366 +#define CLK_USBD301 367 #define CLK_NR_CLKS 512 -- cgit v1.2.3 From ed1e1505db0c116affdfab01e650c44a9c459c65 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 28 May 2016 11:54:29 +0200 Subject: dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Add IDs for I2C, USI (HSI2C) and RTC clocks to Exynos5410. Use the same number as for Exynos5420 just in case in future these drivers are merged. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Sylwester Nawrocki --- include/dt-bindings/clock/exynos5410.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include') diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h index 34c8e96987a1..e94b7bbfd6af 100644 --- a/include/dt-bindings/clock/exynos5410.h +++ b/include/dt-bindings/clock/exynos5410.h @@ -38,9 +38,18 @@ #define CLK_UART0 257 #define CLK_UART1 258 #define CLK_UART2 259 +#define CLK_I2C0 261 +#define CLK_I2C1 262 +#define CLK_I2C2 263 +#define CLK_I2C3 264 +#define CLK_USI0 265 +#define CLK_USI1 266 +#define CLK_USI2 267 +#define CLK_USI3 268 #define CLK_UART3 260 #define CLK_PWM 279 #define CLK_MCT 315 +#define CLK_RTC 317 #define CLK_MMC0 351 #define CLK_MMC1 352 #define CLK_MMC2 353 -- cgit v1.2.3 From 2230c49f09b552454eac51b81e9e4e41060b5e70 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 13 May 2016 16:45:18 +0100 Subject: ASoC: arizona: Add a notifier chain for CODEC events Add a notifier chain that can be used from the machine driver to catch events generated by the CODEC. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- include/linux/mfd/arizona/core.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index d55a42297d49..58ab4c0fe761 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -14,6 +14,7 @@ #define _WM_ARIZONA_CORE_H #include +#include #include #include #include @@ -148,8 +149,17 @@ struct arizona { uint16_t dac_comp_coeff; uint8_t dac_comp_enabled; struct mutex dac_comp_lock; + + struct blocking_notifier_head notifier; }; +static inline int arizona_call_notifiers(struct arizona *arizona, + unsigned long event, + void *data) +{ + return blocking_notifier_call_chain(&arizona->notifier, event, data); +} + int arizona_clk32k_enable(struct arizona *arizona); int arizona_clk32k_disable(struct arizona *arizona); -- cgit v1.2.3 From 6742064aef7f1fba8e68d30b2e726918a5d66790 Mon Sep 17 00:00:00 2001 From: Piotr Stankiewicz Date: Fri, 13 May 2016 17:03:55 +0100 Subject: ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets Certain situations may warrant examining DAPM paths only to a certain arbitrary point, as opposed to always following them to the end. For instance, when establishing a connection between a front-end DAI link and a back-end DAI link in a DPCM path, it does not make sense to walk the DAPM graph beyond the first widget associated with a back-end link. This patch introduces a mechanism which lets a user of dai_get_connected_widgets supply a function which will be called for every node during the graph walk. When invoked, this function can execute arbitrary logic to decide whether the walk, given a DAPM widget and walk direction, should be terminated at that point or continued as normal. Signed-off-by: Piotr Stankiewicz Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 3101d53468aa..ca77db443499 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -358,6 +358,7 @@ struct snd_soc_dapm_context; struct regulator; struct snd_soc_dapm_widget_list; struct snd_soc_dapm_update; +enum snd_soc_dapm_direction; int dapm_regulator_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event); @@ -451,7 +452,9 @@ void dapm_mark_endpoints_dirty(struct snd_soc_card *card); /* dapm path query */ int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream, - struct snd_soc_dapm_widget_list **list); + struct snd_soc_dapm_widget_list **list, + bool (*custom_stop_condition)(struct snd_soc_dapm_widget *, + enum snd_soc_dapm_direction)); struct snd_soc_dapm_context *snd_soc_dapm_kcontrol_dapm( struct snd_kcontrol *kcontrol); -- cgit v1.2.3 From dcc0799bf75c43f3d4e65716c88f35933da186cf Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 27 May 2016 14:45:45 +0100 Subject: ASoC: Introduce SOC_SINGLE_S8_TLV() macro This patch introduces SOC_SINGLE_S8_TLV() macro for volume control on chips which supports both negative and positive gains with sign bit on a 8 bit register, Gain ranges from -128 to +127 with a predefined step size. Currently we only have support to DOUBLE_S8_TLV() which does not fit for cases where we just have separate gain control register for each channel. One of the Qualcomm SOC msm8916 has such gain control register whose gain range is from -38.4dB to +38.4dB with step size of 0.3dB. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- include/sound/soc.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index fd7b58a58d6f..6144882cc96a 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -179,6 +179,17 @@ .get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \ .private_value = SOC_DOUBLE_R_S_VALUE(reg_left, reg_right, xshift, \ xmin, xmax, xsign_bit, xinvert) } +#define SOC_SINGLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\ + .put = snd_soc_put_volsw, \ + .private_value = (unsigned long)&(struct soc_mixer_control) \ + {.reg = xreg, .rreg = xreg, \ + .min = xmin, .max = xmax, .platform_max = xmax, \ + .sign_bit = 7,} } #define SOC_DOUBLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ -- cgit v1.2.3 From 7a1aedba7061948eee4d188740e24ffb20ff7ab7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Horia=20Geant=C4=83?= Date: Thu, 19 May 2016 18:10:43 +0300 Subject: asm-generic/io.h: allow barriers in io{read,write}{16,32}be MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While reviewing the addition of io{read,write}64be accessors, Arnd -finds a potential problem: "If an architecture overrides readq/writeq to have barriers but does not override ioread64be/iowrite64be, this will lack the barriers and behave differently from the little-endian version. I think the only affected architecture is ARC, since ARM and ARM64 both override the big-endian accessors to have the correct barriers, and all others don't use barriers at all." -suggests a fix for the same problem in existing code (16/32-bit accessors); the fix leads "to a double-swap on architectures that don't override the io{read,write}{16,32}be accessors, but it will work correctly on all architectures without them having to override these accessors." Suggested-by: Arnd Bergmann Acked-by: Arnd Bergmann Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu --- include/asm-generic/io.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index 002b81f6f2bc..325c8908f6de 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -613,7 +613,7 @@ static inline void iowrite32(u32 value, volatile void __iomem *addr) #define ioread16be ioread16be static inline u16 ioread16be(const volatile void __iomem *addr) { - return __be16_to_cpu(__raw_readw(addr)); + return swab16(readw(addr)); } #endif @@ -621,7 +621,7 @@ static inline u16 ioread16be(const volatile void __iomem *addr) #define ioread32be ioread32be static inline u32 ioread32be(const volatile void __iomem *addr) { - return __be32_to_cpu(__raw_readl(addr)); + return swab32(readl(addr)); } #endif @@ -629,7 +629,7 @@ static inline u32 ioread32be(const volatile void __iomem *addr) #define iowrite16be iowrite16be static inline void iowrite16be(u16 value, void volatile __iomem *addr) { - __raw_writew(__cpu_to_be16(value), addr); + writew(swab16(value), addr); } #endif @@ -637,7 +637,7 @@ static inline void iowrite16be(u16 value, void volatile __iomem *addr) #define iowrite32be iowrite32be static inline void iowrite32be(u32 value, volatile void __iomem *addr) { - __raw_writel(__cpu_to_be32(value), addr); + writel(swab32(value), addr); } #endif -- cgit v1.2.3 From 9e44fb1816dba8f283809a25c29ff7969a3acb99 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Horia=20Geant=C4=83?= Date: Thu, 19 May 2016 18:10:56 +0300 Subject: asm-generic/io.h: add io{read,write}64 accessors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This will allow device drivers to consistently use io{read,write}XX also for 64-bit accesses. Acked-by: Arnd Bergmann Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu --- include/asm-generic/io.h | 63 +++++++++++++++++++++++++++++++++++++++++++++ include/asm-generic/iomap.h | 8 ++++++ 2 files changed, 71 insertions(+) (limited to 'include') diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index 325c8908f6de..7ef015eb3403 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -585,6 +585,16 @@ static inline u32 ioread32(const volatile void __iomem *addr) } #endif +#ifdef CONFIG_64BIT +#ifndef ioread64 +#define ioread64 ioread64 +static inline u64 ioread64(const volatile void __iomem *addr) +{ + return readq(addr); +} +#endif +#endif /* CONFIG_64BIT */ + #ifndef iowrite8 #define iowrite8 iowrite8 static inline void iowrite8(u8 value, volatile void __iomem *addr) @@ -609,6 +619,16 @@ static inline void iowrite32(u32 value, volatile void __iomem *addr) } #endif +#ifdef CONFIG_64BIT +#ifndef iowrite64 +#define iowrite64 iowrite64 +static inline void iowrite64(u64 value, volatile void __iomem *addr) +{ + writeq(value, addr); +} +#endif +#endif /* CONFIG_64BIT */ + #ifndef ioread16be #define ioread16be ioread16be static inline u16 ioread16be(const volatile void __iomem *addr) @@ -625,6 +645,16 @@ static inline u32 ioread32be(const volatile void __iomem *addr) } #endif +#ifdef CONFIG_64BIT +#ifndef ioread64be +#define ioread64be ioread64be +static inline u64 ioread64be(const volatile void __iomem *addr) +{ + return swab64(readq(addr)); +} +#endif +#endif /* CONFIG_64BIT */ + #ifndef iowrite16be #define iowrite16be iowrite16be static inline void iowrite16be(u16 value, void volatile __iomem *addr) @@ -641,6 +671,16 @@ static inline void iowrite32be(u32 value, volatile void __iomem *addr) } #endif +#ifdef CONFIG_64BIT +#ifndef iowrite64be +#define iowrite64be iowrite64be +static inline void iowrite64be(u64 value, volatile void __iomem *addr) +{ + writeq(swab64(value), addr); +} +#endif +#endif /* CONFIG_64BIT */ + #ifndef ioread8_rep #define ioread8_rep ioread8_rep static inline void ioread8_rep(const volatile void __iomem *addr, void *buffer, @@ -668,6 +708,17 @@ static inline void ioread32_rep(const volatile void __iomem *addr, } #endif +#ifdef CONFIG_64BIT +#ifndef ioread64_rep +#define ioread64_rep ioread64_rep +static inline void ioread64_rep(const volatile void __iomem *addr, + void *buffer, unsigned int count) +{ + readsq(addr, buffer, count); +} +#endif +#endif /* CONFIG_64BIT */ + #ifndef iowrite8_rep #define iowrite8_rep iowrite8_rep static inline void iowrite8_rep(volatile void __iomem *addr, @@ -697,6 +748,18 @@ static inline void iowrite32_rep(volatile void __iomem *addr, writesl(addr, buffer, count); } #endif + +#ifdef CONFIG_64BIT +#ifndef iowrite64_rep +#define iowrite64_rep iowrite64_rep +static inline void iowrite64_rep(volatile void __iomem *addr, + const void *buffer, + unsigned int count) +{ + writesq(addr, buffer, count); +} +#endif +#endif /* CONFIG_64BIT */ #endif /* CONFIG_GENERIC_IOMAP */ #ifdef __KERNEL__ diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h index d8f8622fa044..650fede33c25 100644 --- a/include/asm-generic/iomap.h +++ b/include/asm-generic/iomap.h @@ -30,12 +30,20 @@ extern unsigned int ioread16(void __iomem *); extern unsigned int ioread16be(void __iomem *); extern unsigned int ioread32(void __iomem *); extern unsigned int ioread32be(void __iomem *); +#ifdef CONFIG_64BIT +extern u64 ioread64(void __iomem *); +extern u64 ioread64be(void __iomem *); +#endif extern void iowrite8(u8, void __iomem *); extern void iowrite16(u16, void __iomem *); extern void iowrite16be(u16, void __iomem *); extern void iowrite32(u32, void __iomem *); extern void iowrite32be(u32, void __iomem *); +#ifdef CONFIG_64BIT +extern void iowrite64(u64, void __iomem *); +extern void iowrite64be(u64, void __iomem *); +#endif /* * "string" versions of the above. Note that they -- cgit v1.2.3 From 4bdf1cfca5d46294142cdf49cd997b8b83491adf Mon Sep 17 00:00:00 2001 From: Nicolai Stange Date: Thu, 26 May 2016 12:57:50 +0200 Subject: lib/mpi: purge mpi_set_buffer() mpi_set_buffer() has no in-tree users and similar functionality is provided by mpi_read_raw_data(). Remove mpi_set_buffer(). Signed-off-by: Nicolai Stange Signed-off-by: Herbert Xu --- include/linux/mpi.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/mpi.h b/include/linux/mpi.h index 3a5abe95affd..f219559e5e80 100644 --- a/include/linux/mpi.h +++ b/include/linux/mpi.h @@ -80,7 +80,6 @@ void *mpi_get_buffer(MPI a, unsigned *nbytes, int *sign); int mpi_read_buffer(MPI a, uint8_t *buf, unsigned buf_len, unsigned *nbytes, int *sign); void *mpi_get_secure_buffer(MPI a, unsigned *nbytes, int *sign); -int mpi_set_buffer(MPI a, const void *buffer, unsigned nbytes, int sign); int mpi_write_to_sgl(MPI a, struct scatterlist *sg, unsigned *nbytes, int *sign); -- cgit v1.2.3 From b00e5334ab1bb2e41187fb964a1a2304871fb4ff Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Tue, 31 May 2016 11:13:27 +0200 Subject: vga_switcheroo: Add helper for deferred probing So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7de011 ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter Cc: Ben Skeggs Cc: Alex Deucher Signed-off-by: Lukas Wunner Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de --- include/linux/vga_switcheroo.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index b39a5f3153bd..960bedbdec87 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -165,6 +165,7 @@ int vga_switcheroo_unlock_ddc(struct pci_dev *pdev); int vga_switcheroo_process_delayed_switch(void); +bool vga_switcheroo_client_probe_defer(struct pci_dev *pdev); enum vga_switcheroo_state vga_switcheroo_get_client_state(struct pci_dev *dev); void vga_switcheroo_set_dynamic_switch(struct pci_dev *pdev, enum vga_switcheroo_state dynamic); @@ -188,6 +189,7 @@ static inline enum vga_switcheroo_handler_flags_t vga_switcheroo_handler_flags(v static inline int vga_switcheroo_lock_ddc(struct pci_dev *pdev) { return -ENODEV; } static inline int vga_switcheroo_unlock_ddc(struct pci_dev *pdev) { return -ENODEV; } static inline int vga_switcheroo_process_delayed_switch(void) { return 0; } +static inline bool vga_switcheroo_client_probe_defer(struct pci_dev *pdev) { return false; } static inline enum vga_switcheroo_state vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_ON; } static inline void vga_switcheroo_set_dynamic_switch(struct pci_dev *pdev, enum vga_switcheroo_state dynamic) {} -- cgit v1.2.3 From bf1ecd210541ef5f3a110e88e8ca5d33b4aa5c23 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 31 May 2016 00:16:50 +0300 Subject: cfg80211: Allow cfg80211_connect_result() errors to be distinguished Previously, the status parameter to cfg80211_connect_result() was documented as using WLAN_STATUS_UNSPECIFIED_FAILURE (1) when the real status code for the failure is not known. This value can be used by an AP (and often is) and as such, user space cannot distinguish between explicitly rejected authentication/association and not being able to even try to associate or not receiving a response from the AP. Add a new inline function, cfg80211_connect_timeout(), to be used when the driver knows that the connection attempt failed due to a reason where connection could not be attempt or no response was received from the AP. The internal functions now allow a negative status value (-1) to be used as an indication of this special case. This results in the NL80211_ATTR_TIMED_OUT to be added to the NL80211_CMD_CONNECT event to allow user space to determine this case was hit. For backwards compatibility, NL80211_STATUS_CODE with the value WLAN_STATUS_UNSPECIFIED_FAILURE is still indicated in the event in such a case. Signed-off-by: Jouni Malinen [johannes: fix cfg80211_connect_bss() prototype to use int for status, add cfg80211_connect_timeout() to docbook, fix docbook] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 53 +++++++++++++++++++++++++++++++++----------- include/uapi/linux/nl80211.h | 7 +++++- 2 files changed, 46 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 63921672bed0..537f010cf5e1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2367,19 +2367,23 @@ struct cfg80211_qos_map { * (invoked with the wireless_dev mutex held) * * @connect: Connect to the ESS with the specified parameters. When connected, - * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. - * If the connection fails for some reason, call cfg80211_connect_result() - * with the status from the AP. The driver is allowed to roam to other - * BSSes within the ESS when the other BSS matches the connect parameters. - * When such roaming is initiated by the driver, the driver is expected to - * verify that the target matches the configured security parameters and - * to use Reassociation Request frame instead of Association Request frame. - * The connect function can also be used to request the driver to perform - * a specific roam when connected to an ESS. In that case, the prev_bssid + * call cfg80211_connect_result()/cfg80211_connect_bss() with status code + * %WLAN_STATUS_SUCCESS. If the connection fails for some reason, call + * cfg80211_connect_result()/cfg80211_connect_bss() with the status code + * from the AP or cfg80211_connect_timeout() if no frame with status code + * was received. + * The driver is allowed to roam to other BSSes within the ESS when the + * other BSS matches the connect parameters. When such roaming is initiated + * by the driver, the driver is expected to verify that the target matches + * the configured security parameters and to use Reassociation Request + * frame instead of Association Request frame. + * The connect function can also be used to request the driver to perform a + * specific roam when connected to an ESS. In that case, the prev_bssid * parameter is set to the BSSID of the currently associated BSS as an - * indication of requesting reassociation. In both the driver-initiated and - * new connect() call initiated roaming cases, the result of roaming is - * indicated with a call to cfg80211_roamed() or cfg80211_roamed_bss(). + * indication of requesting reassociation. + * In both the driver-initiated and new connect() call initiated roaming + * cases, the result of roaming is indicated with a call to + * cfg80211_roamed() or cfg80211_roamed_bss(). * (invoked with the wireless_dev mutex held) * @disconnect: Disconnect from the BSS/ESS. * (invoked with the wireless_dev mutex held) @@ -4680,7 +4684,7 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid, struct cfg80211_bss *bss, const u8 *req_ie, size_t req_ie_len, const u8 *resp_ie, - size_t resp_ie_len, u16 status, gfp_t gfp); + size_t resp_ie_len, int status, gfp_t gfp); /** * cfg80211_connect_result - notify cfg80211 of connection result @@ -4709,6 +4713,29 @@ cfg80211_connect_result(struct net_device *dev, const u8 *bssid, resp_ie_len, status, gfp); } +/** + * cfg80211_connect_timeout - notify cfg80211 of connection timeout + * + * @dev: network device + * @bssid: the BSSID of the AP + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever connect() has failed + * in a sequence where no explicit authentication/association rejection was + * received from the AP. This could happen, e.g., due to not being able to send + * out the Authentication or Association Request frame or timing out while + * waiting for the response. + */ +static inline void +cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, gfp_t gfp) +{ + cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, NULL, 0, -1, + gfp); +} + /** * cfg80211_roamed - notify cfg80211 of roaming * diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e23d78685a01..8d995316aadb 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -493,7 +493,12 @@ * This attribute is ignored if driver does not support roam scan. * It is also sent as an event, with the BSSID and response IEs when the * connection is established or failed to be established. This can be - * determined by the STATUS_CODE attribute. + * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, + * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the + * event, the connection attempt failed due to not being able to initiate + * authentication/association or not receiving a response from the AP. + * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as + * well to remain backwards compatible. * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), * sent as an event when the card/driver roamed by itself. * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify -- cgit v1.2.3 From 019ae3a918811715192b22c400ac78d54acc26a9 Mon Sep 17 00:00:00 2001 From: "Kanchanapally, Vidyullatha" Date: Mon, 16 May 2016 10:41:04 +0530 Subject: cfg80211: Advertise extended capabilities per interface type to userspace The driver extended capabilities may differ for different interface types which the userspace needs to know (for example the fine timing measurement initiator and responder bits might differ for a station and AP). Add a new nl80211 attribute to provide extended capabilities per interface type to userspace. Signed-off-by: Vidyullatha Kanchanapally Reviewed-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 28 +++++++++++++++++++++++++++- include/uapi/linux/nl80211.h | 7 +++++++ 2 files changed, 34 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 537f010cf5e1..7bbb00d8b2cd 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3083,6 +3083,24 @@ struct wiphy_vendor_command { unsigned long *storage); }; +/** + * struct wiphy_iftype_ext_capab - extended capabilities per interface type + * @iftype: interface type + * @extended_capabilities: extended capabilities supported by the driver, + * additional capabilities might be supported by userspace; these are the + * 802.11 extended capabilities ("Extended Capabilities element") and are + * in the same format as in the information element. See IEEE Std + * 802.11-2012 8.4.2.29 for the defined fields. + * @extended_capabilities_mask: mask of the valid values + * @extended_capabilities_len: length of the extended capabilities + */ +struct wiphy_iftype_ext_capab { + enum nl80211_iftype iftype; + const u8 *extended_capabilities; + const u8 *extended_capabilities_mask; + u8 extended_capabilities_len; +}; + /** * struct wiphy - wireless hardware description * @reg_notifier: the driver's regulatory notification callback, @@ -3203,9 +3221,14 @@ struct wiphy_vendor_command { * additional capabilities might be supported by userspace; these are * the 802.11 extended capabilities ("Extended Capabilities element") * and are in the same format as in the information element. See - * 802.11-2012 8.4.2.29 for the defined fields. + * 802.11-2012 8.4.2.29 for the defined fields. These are the default + * extended capabilities to be used if the capabilities are not specified + * for a specific interface type in iftype_ext_capab. * @extended_capabilities_mask: mask of the valid values * @extended_capabilities_len: length of the extended capabilities + * @iftype_ext_capab: array of extended capabilities per interface type + * @num_iftype_ext_capab: number of interface types for which extended + * capabilities are specified separately. * @coalesce: packet coalescing support information * * @vendor_commands: array of vendor commands supported by the hardware @@ -3305,6 +3328,9 @@ struct wiphy { const u8 *extended_capabilities, *extended_capabilities_mask; u8 extended_capabilities_len; + const struct wiphy_iftype_ext_capab *iftype_ext_capab; + unsigned int num_iftype_ext_capab; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 8d995316aadb..53c8278827a0 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1824,6 +1824,11 @@ enum nl80211_commands { * * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment * + * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: + * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per + * interface type. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2206,6 +2211,8 @@ enum nl80211_attrs { NL80211_ATTR_PAD, + NL80211_ATTR_IFTYPE_EXT_CAPA, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 168d7c4e8bb25c076ed8be67fcca84f5dcd0b2c6 Mon Sep 17 00:00:00 2001 From: John Youn Date: Tue, 31 May 2016 16:55:01 -0700 Subject: reset: Return -ENOTSUPP when not configured Prior to commit 6c96f05c8bb8 ("reset: Make [of_]reset_control_get[_foo] functions wrappers"), the "optional" functions returned -ENOTSUPP when CONFIG_RESET_CONTROLLER was not set. Revert back to the old behavior by changing the new __devm_reset_control_get() and __of_reset_control_get() functions to return ERR_PTR(-ENOTSUPP) when compiled without CONFIG_RESET_CONTROLLER. Otherwise they will return -EINVAL causing users to think that an error occurred when CONFIG_RESET_CONTROLLER is not set. Fixes: 6c96f05c8bb8 ("reset: Make [of_]reset_control_get[_foo] functions wrappers") Signed-off-by: John Youn Signed-off-by: Philipp Zabel --- include/linux/reset.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/reset.h b/include/linux/reset.h index ec0306ce7b92..067db57c81dc 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -71,14 +71,14 @@ static inline struct reset_control *__of_reset_control_get( struct device_node *node, const char *id, int index, int shared) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } static inline struct reset_control *__devm_reset_control_get( struct device *dev, const char *id, int index, int shared) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } #endif /* CONFIG_RESET_CONTROLLER */ -- cgit v1.2.3 From 79795e20a184ebabf4ae743d1506cc39783caa46 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 30 May 2016 15:27:16 +0200 Subject: dt-bindings: reset: Add bindings for the Meson SoC Reset Controller Add DT bindings for the Meson SoC Reset Controller documentation and the associated include file. Acked-by: Rob Herring Signed-off-by: Neil Armstrong Signed-off-by: Philipp Zabel --- .../dt-bindings/reset/amlogic,meson-gxbb-reset.h | 210 +++++++++++++++++++++ include/dt-bindings/reset/amlogic,meson8b-reset.h | 175 +++++++++++++++++ 2 files changed, 385 insertions(+) create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h create mode 100644 include/dt-bindings/reset/amlogic,meson8b-reset.h (limited to 'include') diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h new file mode 100644 index 000000000000..524d6077ac1b --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h @@ -0,0 +1,210 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS_RESET 2 +#define RESET_DDR_TOP 3 +#define RESET_DCU_RESET 4 +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_VID_PLL_DIV 7 +/* 8 */ +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_VCBUS 13 +/* 14 */ +/* 15 */ +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +#define RESET_NAND_CAPB3 18 +#define RESET_HDMITX_CAPB3 19 +#define RESET_MALI_CAPB3 20 +#define RESET_DOS_CAPB3 21 +#define RESET_SYS_CPU_CAPB3 22 +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +#define RESET_MMC 27 +#define RESET_MIPI_0 28 +#define RESET_MIPI_1 29 +#define RESET_MIPI_2 30 +#define RESET_MIPI_3 31 +/* RESET1 */ +#define RESET_CPPM 32 +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_AO_RESET 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +#define RESET_ROM_BOOT 47 +#define RESET_SYS_CPU_0 48 +#define RESET_SYS_CPU_1 49 +#define RESET_SYS_CPU_2 50 +#define RESET_SYS_CPU_3 51 +#define RESET_SYS_CPU_CORE_0 52 +#define RESET_SYS_CPU_CORE_1 53 +#define RESET_SYS_CPU_CORE_2 54 +#define RESET_SYS_CPU_CORE_3 55 +#define RESET_SYS_PLL_DIV 56 +#define RESET_SYS_CPU_AXI 57 +#define RESET_SYS_CPU_L2 58 +#define RESET_SYS_CPU_P 59 +#define RESET_SYS_CPU_MBIST 60 +/* 61 */ +/* 62 */ +/* 63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_HDMI_TX 66 +/* 67 */ +/* 68 */ +/* 69 */ +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75 */ +/* 76 */ +#define RESET_AO_CPU_RESET 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_TVFE 101 +#define RESET_AHB_BRIDGE_CNTL 102 +/* 103 */ +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128 */ +/* 129 */ +/* 130 */ +/* 131 */ +#define RESET_DVIN_RESET 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +#define RESET_RTC 138 +/* 139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_MASTER_2 142 +#define RESET_I2C_MASTER_1 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_SPICC 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_SANA 197 +/* 198 */ +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1_2 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SDHC 206 +#define RESET_UART_SLIP 207 +/* 208-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +/* 228 */ +#define RESET_DEVICE_MMC_ARB 229 +/* 230 */ +#define RESET_VID_LOCK 231 +#define RESET_A9_DMC_PIPEL 232 +/* 233-255 */ + +#endif diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h new file mode 100644 index 000000000000..614aff2c7aff --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h @@ -0,0 +1,175 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +#define RESET_VLD 1 +#define RESET_IQIDCT 2 +#define RESET_MC 3 +/* 8 */ +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_MCPU 7 +#define RESET_CCPU 8 +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_MDEC 13 +#define RESET_VLD_PART 14 +#define RESET_VIFIFO 15 +/* 16-31 */ +/* RESET1 */ +/* 32 */ +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_VDAC_1 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +#define RESET_AHB_BRIDGE 39 +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_ABUF 44 +#define RESET_AHB_DATA 45 +#define RESET_AHB_CNTL 46 +#define RESET_ROM_BOOT 47 +/* 48-63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_DBLK 66 +#define RESET_PIC_DC 66 +#define RESET_PSC 66 +#define RESET_NAND 66 +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +#define RESET_HDMI_APB 75 +#define RESET_AUDIO_APB 76 +#define RESET_MEDIA_CPU 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU_0 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_AUDIO_PLL_MODULATOR 101 +#define RESET_AHB_BRIDGE_CNTL 102 +#define RESET_SYS_CPU_1 103 +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +#define RESET_PL310 128 +#define RESET_A5_APB 129 +#define RESET_A5_AXI 130 +#define RESET_A5 131 +#define RESET_DVIN 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +#define RESET_VENCT 136 +#define RESET_VDAC_4 137 +#define RESET_RTC 138 +#define RESET_A5_DEBUG 139 +#define RESET_VDI6 140 +#define RESET_VENCL 141 +/* 142-159 */ +/* RESET5 */ +#define RESET_DDR_PLL 160 +#define RESET_MISC_PLL 161 +#define RESET_SYS_PLL 162 +#define RESET_HPLL_PLL 163 +#define RESET_AUDIO_PLL 164 +#define RESET_VID2_PLL 165 +/* 166-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_IR_REMOTE 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_PERIPHS_I2C_MASTER_1 197 +#define RESET_PERIPHS_I2C_SLAVE 198 +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SPI_1 206 +#define RESET_PERIPHS_LED_PWM 207 +/* 208-223 */ +/* RESET7 */ +/* 224-255 */ + +#endif -- cgit v1.2.3 From 109869f522852094393b829918b56327c0feb360 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 31 May 2016 20:39:00 +0200 Subject: dt-bindings: clock: Add TMU clock ID to Exynos5410 Add ID for TMU clock to Exynos5410. Use the same number as for Exynos5420 just in case in future these drivers were merged. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Sylwester Nawrocki --- include/dt-bindings/clock/exynos5410.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h index e94b7bbfd6af..705b2aa84317 100644 --- a/include/dt-bindings/clock/exynos5410.h +++ b/include/dt-bindings/clock/exynos5410.h @@ -50,6 +50,7 @@ #define CLK_PWM 279 #define CLK_MCT 315 #define CLK_RTC 317 +#define CLK_TMU 318 #define CLK_MMC0 351 #define CLK_MMC1 352 #define CLK_MMC2 353 -- cgit v1.2.3 From 59451e1233bd315c5379a631838a03d80e689581 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Thu, 5 May 2016 17:31:47 -0700 Subject: mtd: spi-nor: change return value of read/write Change the return value of spi-nor device read and write methods to allow returning amount of data transferred and errors as read(2)/write(2) does. Also, start handling positive returns in spi_nor_read(), since we want to convert drivers to start returning the read-length both via *retlen and the return code. (We don't need to do the same transition process for spi_nor_write(), since ->write() didn't used to have a return code at all.) Signed-off-by: Michal Suchanek Signed-off-by: Brian Norris Tested-by Cyrille Pitchen Acked-by: Michal Suchanek Tested-by: Michal Suchanek --- include/linux/mtd/spi-nor.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 7f041bd88b82..34680a493156 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -173,9 +173,9 @@ struct spi_nor { int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); - int (*read)(struct spi_nor *nor, loff_t from, + ssize_t (*read)(struct spi_nor *nor, loff_t from, size_t len, size_t *retlen, u_char *read_buf); - void (*write)(struct spi_nor *nor, loff_t to, + ssize_t (*write)(struct spi_nor *nor, loff_t to, size_t len, size_t *retlen, const u_char *write_buf); int (*erase)(struct spi_nor *nor, loff_t offs); -- cgit v1.2.3 From 2dd087b16946cf168f401526adf26afa771bb740 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Thu, 5 May 2016 17:31:53 -0700 Subject: mtd: spi-nor: stop passing around retlen Do not pass retlen to hardware driver read/write functions. Update it in spi-nor generic driver instead. Signed-off-by: Michal Suchanek Signed-off-by: Brian Norris Tested-by Cyrille Pitchen Acked-by: Michal Suchanek Tested-by: Michal Suchanek --- include/linux/mtd/spi-nor.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 34680a493156..c425c7b4c2a0 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -174,9 +174,9 @@ struct spi_nor { int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); ssize_t (*read)(struct spi_nor *nor, loff_t from, - size_t len, size_t *retlen, u_char *read_buf); + size_t len, u_char *read_buf); ssize_t (*write)(struct spi_nor *nor, loff_t to, - size_t len, size_t *retlen, const u_char *write_buf); + size_t len, const u_char *write_buf); int (*erase)(struct spi_nor *nor, loff_t offs); int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); -- cgit v1.2.3 From 595d0b29463343c3be995d3948930b8231e5b8cd Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 31 May 2016 15:22:41 -0700 Subject: udp: avoid csum_partial() for validated skb In commit e6afc8ace6dd5 ("udp: remove headers from UDP packets before queueing"), udp_csum_pull_header() helper was added but missed fact that CHECKSUM_UNNECESSARY packets were now converted to CHECKSUM_NONE and skb->csum_valid was set to 1 for them. Since csum_partial() is quite expensive, even for 8-byte area, it is worth adding a test. We also can use skb->data instead of udp_hdr() as we are pulling UDP headers, as it is sightly faster. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/udp.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/udp.h b/include/net/udp.h index ae07f375370d..8894d7144189 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -160,8 +160,8 @@ void udp_set_csum(bool nocheck, struct sk_buff *skb, static inline void udp_csum_pull_header(struct sk_buff *skb) { - if (skb->ip_summed == CHECKSUM_NONE) - skb->csum = csum_partial(udp_hdr(skb), sizeof(struct udphdr), + if (!skb->csum_valid && skb->ip_summed == CHECKSUM_NONE) + skb->csum = csum_partial(skb->data, sizeof(struct udphdr), skb->csum); skb_pull_rcsum(skb, sizeof(struct udphdr)); UDP_SKB_CB(skb)->cscov -= sizeof(struct udphdr); -- cgit v1.2.3 From 3377900791ea48a638fb9b70869258332951271d Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Wed, 1 Jun 2016 16:35:42 +0100 Subject: drm: Update obsolete information from {enable/disable}_vblank hooks. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 4dfd64862ff8 ("drm: Use vblank timestamps to guesstimate how many vblanks were missed"), the DRM framework can cope with devices that don't have a hardware counter for vsync events without having to keep the vsync interrupts enabled all the time. Drivers handling such hardware should use drm_vblank_no_hw_counter() function for their ->get_vblank_counter hook. Cc: Daniel Vetter Cc: Ville Syrjälä Signed-off-by: Liviu Dudau Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464795342-32297-1-git-send-email-Liviu.Dudau@arm.com --- include/drm/drmP.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/drm/drmP.h b/include/drm/drmP.h index c5d29505f937..00518289105f 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -430,7 +430,7 @@ struct drm_driver { * * Driver callback for fetching a raw hardware vblank counter for @crtc. * If a device doesn't have a hardware counter, the driver can simply - * return the value of drm_vblank_count. The DRM core will account for + * use drm_vblank_no_hw_counter() function. The DRM core will account for * missed vblank events while interrupts where disabled based on system * timestamps. * @@ -448,8 +448,8 @@ struct drm_driver { * @pipe: which irq to enable * * Enable vblank interrupts for @crtc. If the device doesn't have - * a hardware vblank counter, this routine should be a no-op, since - * interrupts will have to stay on to keep the count accurate. + * a hardware vblank counter, the driver should use the + * drm_vblank_no_hw_counter() function that keeps a virtual counter. * * RETURNS * Zero on success, appropriate errno if the given @crtc's vblank @@ -463,8 +463,8 @@ struct drm_driver { * @pipe: which irq to enable * * Disable vblank interrupts for @crtc. If the device doesn't have - * a hardware vblank counter, this routine should be a no-op, since - * interrupts will have to stay on to keep the count accurate. + * a hardware vblank counter, the driver should use the + * drm_vblank_no_hw_counter() function that keeps a virtual counter. */ void (*disable_vblank) (struct drm_device *dev, unsigned int pipe); -- cgit v1.2.3 From 76bf0db5543976ef50362db7071da367cb118532 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Wed, 1 Jun 2016 15:10:02 +0200 Subject: dma-buf/fence: make fence context 64 bit v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fence contexts are created on the fly (for example) by the GPU scheduler used in the amdgpu driver as a result of an userspace request. Because of this userspace could in theory force a wrap around of the 32bit context number if it doesn't behave well. Avoid this by increasing the context number to 64bits. This way even when userspace manages to allocate a billion contexts per second it takes more than 500 years for the context number to wrap around. v2: fix printf formats as well. Signed-off-by: Christian König Reviewed-by: Gustavo Padovan Acked-by: Sumit Semwal Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-2-git-send-email-deathsimple@vodafone.de --- include/linux/fence.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/fence.h b/include/linux/fence.h index 2b17698b60b8..18a97c6b79db 100644 --- a/include/linux/fence.h +++ b/include/linux/fence.h @@ -75,7 +75,8 @@ struct fence { struct rcu_head rcu; struct list_head cb_list; spinlock_t *lock; - unsigned context, seqno; + u64 context; + unsigned seqno; unsigned long flags; ktime_t timestamp; int status; @@ -178,7 +179,7 @@ struct fence_ops { }; void fence_init(struct fence *fence, const struct fence_ops *ops, - spinlock_t *lock, unsigned context, unsigned seqno); + spinlock_t *lock, u64 context, unsigned seqno); void fence_release(struct kref *kref); void fence_free(struct fence *fence); @@ -352,27 +353,27 @@ static inline signed long fence_wait(struct fence *fence, bool intr) return ret < 0 ? ret : 0; } -unsigned fence_context_alloc(unsigned num); +u64 fence_context_alloc(unsigned num); #define FENCE_TRACE(f, fmt, args...) \ do { \ struct fence *__ff = (f); \ if (config_enabled(CONFIG_FENCE_TRACE)) \ - pr_info("f %u#%u: " fmt, \ + pr_info("f %llu#%u: " fmt, \ __ff->context, __ff->seqno, ##args); \ } while (0) #define FENCE_WARN(f, fmt, args...) \ do { \ struct fence *__ff = (f); \ - pr_warn("f %u#%u: " fmt, __ff->context, __ff->seqno, \ + pr_warn("f %llu#%u: " fmt, __ff->context, __ff->seqno, \ ##args); \ } while (0) #define FENCE_ERR(f, fmt, args...) \ do { \ struct fence *__ff = (f); \ - pr_err("f %u#%u: " fmt, __ff->context, __ff->seqno, \ + pr_err("f %llu#%u: " fmt, __ff->context, __ff->seqno, \ ##args); \ } while (0) -- cgit v1.2.3 From b3dfbdf261e076a997f812323edfdba84ba80256 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Wed, 1 Jun 2016 15:10:03 +0200 Subject: dma-buf/fence: add fence_array fences v6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit struct fence_array inherits from struct fence and carries a collection of fences that needs to be waited together. It is useful to translate a sync_file to a fence to remove the complexity of dealing with sync_files on DRM drivers. So even if there are many fences in the sync_file that needs to waited for a commit to happen, they all get added to the fence_collection and passed for DRM use as a standard struct fence. That means that no changes needed to any driver besides supporting fences. To avoid fence_array's fence allocates a new timeline if needed (when combining fences from different timelines). v2: Comments by Daniel Vetter: - merge fence_collection_init() and fence_collection_add() - only add callbacks at ->enable_signalling() - remove fence_collection_put() - check for type on to_fence_collection() - adjust fence_is_later() and fence_later() to WARN_ON() if they are used with collection fences. v3: - Initialize fence_cb.node at fence init. Comments by Chris Wilson: - return "unbound" on fence_collection_get_timeline_name() - don't stop adding callbacks if one fails - remove redundant !! on fence_collection_enable_signaling() - remove redundant () on fence_collection_signaled - use fence_default_wait() instead v4 (chk): Rework, simplification and cleanup: - Drop FENCE_NO_CONTEXT handling, always allocate a context. - Rename to fence_array. - Return fixed driver name. - Register only one callback at a time. - Document that create function takes ownership of array. v5 (chk): More work and fixes: - Avoid deadlocks by adding all callbacks at once again. - Stop trying to remove the callbacks. - Provide context and sequence number for the array fence. v6 (chk): Fixes found during testing - Fix stupid typo in _enable_signaling(). Signed-off-by: Gustavo Padovan Signed-off-by: Christian König Reviewed-by: Gustavo Padovan Acked-by: Sumit Semwal [danvet: Improve commit message as suggested by Gustavo.] Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-3-git-send-email-deathsimple@vodafone.de --- include/linux/fence-array.h | 72 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 include/linux/fence-array.h (limited to 'include') diff --git a/include/linux/fence-array.h b/include/linux/fence-array.h new file mode 100644 index 000000000000..593ab983129e --- /dev/null +++ b/include/linux/fence-array.h @@ -0,0 +1,72 @@ +/* + * fence-array: aggregates fence to be waited together + * + * Copyright (C) 2016 Collabora Ltd + * Copyright (C) 2016 Advanced Micro Devices, Inc. + * Authors: + * Gustavo Padovan + * Christian König + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __LINUX_FENCE_ARRAY_H +#define __LINUX_FENCE_ARRAY_H + +#include + +/** + * struct fence_array_cb - callback helper for fence array + * @cb: fence callback structure for signaling + * @array: reference to the parent fence array object + */ +struct fence_array_cb { + struct fence_cb cb; + struct fence_array *array; +}; + +/** + * struct fence_array - fence to represent an array of fences + * @base: fence base class + * @lock: spinlock for fence handling + * @num_fences: number of fences in the array + * @num_pending: fences in the array still pending + * @fences: array of the fences + */ +struct fence_array { + struct fence base; + + spinlock_t lock; + unsigned num_fences; + atomic_t num_pending; + struct fence **fences; +}; + +extern const struct fence_ops fence_array_ops; + +/** + * to_fence_array - cast a fence to a fence_array + * @fence: fence to cast to a fence_array + * + * Returns NULL if the fence is not a fence_array, + * or the fence_array otherwise. + */ +static inline struct fence_array *to_fence_array(struct fence *fence) +{ + if (fence->ops != &fence_array_ops) + return NULL; + + return container_of(fence, struct fence_array, base); +} + +struct fence_array *fence_array_create(int num_fences, struct fence **fences, + u64 context, unsigned seqno); + +#endif /* __LINUX_FENCE_ARRAY_H */ -- cgit v1.2.3 From f71045689656e307166f6d625fa13d8b75fb0523 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Wed, 1 Jun 2016 15:10:04 +0200 Subject: dma-buf/fence: add signal_on_any to the fence array v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If @signal_on_any is true the fence array signals if any fence in the array signals, otherwise it signals when all fences in the array signal. v2: fix signaled test and add comment suggested by Chris Wilson. Signed-off-by: Christian König Reviewed-by: Gustavo Padovan Acked-by: Sumit Semwal Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-4-git-send-email-deathsimple@vodafone.de --- include/linux/fence-array.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/fence-array.h b/include/linux/fence-array.h index 593ab983129e..86baaa45567c 100644 --- a/include/linux/fence-array.h +++ b/include/linux/fence-array.h @@ -67,6 +67,7 @@ static inline struct fence_array *to_fence_array(struct fence *fence) } struct fence_array *fence_array_create(int num_fences, struct fence **fences, - u64 context, unsigned seqno); + u64 context, unsigned seqno, + bool signal_on_any); #endif /* __LINUX_FENCE_ARRAY_H */ -- cgit v1.2.3 From 4528dd8ed477bf202bd33ee48d38d656672d37f8 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 1 Jun 2016 11:45:49 +0200 Subject: dt-bindings: clock: Add watchdog and SSS clock IDs to Exynos5410 Add IDs for watchdog and Security SubSystem to Exynos5410. Use the same number as for Exynos5420 just in case in future these drivers were merged. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Sylwester Nawrocki --- include/dt-bindings/clock/exynos5410.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h index 705b2aa84317..85b467b3a207 100644 --- a/include/dt-bindings/clock/exynos5410.h +++ b/include/dt-bindings/clock/exynos5410.h @@ -49,6 +49,7 @@ #define CLK_UART3 260 #define CLK_PWM 279 #define CLK_MCT 315 +#define CLK_WDT 316 #define CLK_RTC 317 #define CLK_TMU 318 #define CLK_MMC0 351 @@ -57,6 +58,7 @@ #define CLK_USBH20 365 #define CLK_USBD300 366 #define CLK_USBD301 367 +#define CLK_SSS 471 #define CLK_NR_CLKS 512 -- cgit v1.2.3 From 2f196b7c4b82eeff3574eb2999e78add33ef4361 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 2 Jun 2016 16:21:44 +0200 Subject: drm/atomic: Add drm_atomic_crtc_state_for_each_plane_state ... and use it in msm&vc4. Again just want to encapsulate drm_atomic_state internals a bit. The const threading is a bit awkward in vc4 since C sucks, but I still think it's worth to enforce this. Eventually I want to make all the obj->state pointers const too, but that's a lot more work ... v2: Provide safe macro to wrap up the unsafe helper better, suggested by Maarten. v3: Fixup subject (Maarten) and spelling fixes (Eric Engestrom). Cc: Eric Anholt Cc: Rob Clark Cc: Maarten Lankhorst Cc: Eric Engestrom Reviewed-by: Maarten Lankhorst Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464877304-4213-1-git-send-email-daniel.vetter@ffwll.ch --- include/drm/drm_atomic.h | 36 ++++++++++++++++++++++++++++++++++++ include/drm/drm_atomic_helper.h | 24 ++++++++++++++++++++++-- 2 files changed, 58 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 92c84e9ab09a..4e97186293be 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -109,6 +109,42 @@ drm_atomic_get_existing_connector_state(struct drm_atomic_state *state, return state->connector_states[index]; } +/** + * __drm_atomic_get_current_plane_state - get current plane state + * @state: global atomic state object + * @plane: plane to grab + * + * This function returns the plane state for the given plane, either from + * @state, or if the plane isn't part of the atomic state update, from @plane. + * This is useful in atomic check callbacks, when drivers need to peek at, but + * not change, state of other planes, since it avoids threading an error code + * back up the call chain. + * + * WARNING: + * + * Note that this function is in general unsafe since it doesn't check for the + * required locking for access state structures. Drivers must ensure that it is + * save to access the returned state structure through other means. One commone + * example is when planes are fixed to a single CRTC, and the driver knows that + * the CRTC locks is held already. In that case holding the CRTC locks gives a + * read-lock on all planes connected to that CRTC. But if planes can be + * reassigned things get more tricky. In that case it's better to use + * drm_atomic_get_plane_state and wire up full error handling. + * + * Returns: + * + * Read-only pointer to the current plane state. + */ +static inline const struct drm_plane_state * +__drm_atomic_get_current_plane_state(struct drm_atomic_state *state, + struct drm_plane *plane) +{ + if (state->plane_states[drm_plane_index(plane)]) + return state->plane_states[drm_plane_index(plane)]; + + return plane->state; +} + int __must_check drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state, struct drm_display_mode *mode); diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index d473dcc91f54..b03bd83703b4 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -159,7 +159,7 @@ void drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * This iterates over the current state, useful (for example) when applying * atomic state after it has been checked and swapped. To iterate over the * planes which *will* be attached (for ->atomic_check()) see - * drm_crtc_for_each_pending_plane() + * drm_crtc_for_each_pending_plane(). */ #define drm_atomic_crtc_for_each_plane(plane, crtc) \ drm_for_each_plane_mask(plane, (crtc)->dev, (crtc)->state->plane_mask) @@ -171,11 +171,31 @@ void drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be * attached if the specified state is applied. Useful during (for example) - * ->atomic_check() operations, to validate the incoming state + * ->atomic_check() operations, to validate the incoming state. */ #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \ drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask) +/** + * drm_crtc_atomic_state_for_each_plane_state - iterate over attached planes in new state + * @plane: the loop cursor + * @plane_state: loop cursor for the plane's state, must be const + * @crtc_state: the incoming crtc-state + * + * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be + * attached if the specified state is applied. Useful during (for example) + * ->atomic_check() operations, to validate the incoming state. + * + * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a + * const plane_state. This is useful when a driver just wants to peek at other + * active planes on this crtc, but does not need to change it. + */ +#define drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, crtc_state) \ + drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask) \ + for_each_if ((plane_state = \ + __drm_atomic_get_current_plane_state((crtc_state)->state, \ + plane))) + /* * drm_atomic_plane_disabling - check whether a plane is being disabled * @plane: plane object -- cgit v1.2.3 From 63e83c1dba5490de84c2d558a2425730db7fb134 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 2 Jun 2016 00:06:32 +0200 Subject: drm: Consolidate connector arrays in drm_atomic_state It's kinda pointless to have 2 separate mallocs for these. And when we add more per-connector state in the future it's even more pointless. Right now there's no such thing planned, but both Gustavo's per-crtc fence patches, and some nonblocking commit helpers I'm playing around with will add more per-crtc stuff. It makes sense to also consolidate connectors, just for consistency. In the future we can use this to store a pointer to the preceeding state, making an atomic update entirely free-standing. This will be needed to be able to queue them up with a depth > 1. Cc: Gustavo Padovan Reviewed-by: Maarten Lankhorst Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-10-git-send-email-daniel.vetter@ffwll.ch --- include/drm/drm_atomic.h | 10 +++++----- include/drm/drm_crtc.h | 11 +++++++---- 2 files changed, 12 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 4e97186293be..37478adb6a16 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -106,7 +106,7 @@ drm_atomic_get_existing_connector_state(struct drm_atomic_state *state, if (index >= state->num_connector) return NULL; - return state->connector_states[index]; + return state->connectors[index].state; } /** @@ -175,11 +175,11 @@ int __must_check drm_atomic_check_only(struct drm_atomic_state *state); int __must_check drm_atomic_commit(struct drm_atomic_state *state); int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state); -#define for_each_connector_in_state(state, connector, connector_state, __i) \ +#define for_each_connector_in_state(__state, connector, connector_state, __i) \ for ((__i) = 0; \ - (__i) < (state)->num_connector && \ - ((connector) = (state)->connectors[__i], \ - (connector_state) = (state)->connector_states[__i], 1); \ + (__i) < (__state)->num_connector && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (connector_state) = (__state)->connectors[__i].state, 1); \ (__i)++) \ for_each_if (connector) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index d1559cd04e3d..751990a3bc7a 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1693,6 +1693,11 @@ struct drm_bridge { void *driver_private; }; +struct __drm_connnectors_state { + struct drm_connector *ptr; + struct drm_connector_state *state; +}; + /** * struct drm_atomic_state - the global state object for atomic updates * @dev: parent DRM device @@ -1704,8 +1709,7 @@ struct drm_bridge { * @crtcs: pointer to array of CRTC pointers * @crtc_states: pointer to array of CRTC states pointers * @num_connector: size of the @connectors and @connector_states arrays - * @connectors: pointer to array of connector pointers - * @connector_states: pointer to array of connector states pointers + * @connectors: pointer to array of structures with per-connector data * @acquire_ctx: acquire context for this atomic modeset state update */ struct drm_atomic_state { @@ -1718,8 +1722,7 @@ struct drm_atomic_state { struct drm_crtc **crtcs; struct drm_crtc_state **crtc_states; int num_connector; - struct drm_connector **connectors; - struct drm_connector_state **connector_states; + struct __drm_connnectors_state *connectors; struct drm_modeset_acquire_ctx *acquire_ctx; }; -- cgit v1.2.3 From b8b5342b699b9b3d1b3455861a68b96424146959 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 2 Jun 2016 00:06:33 +0200 Subject: drm: Consolidate plane arrays in drm_atomic_state It's kinda pointless to have 2 separate mallocs for these. And when we add more per-plane state in the future it's even more pointless. Right now there's no such thing planned, but both Gustavo's per-crtc fence patches, and some nonblocking commit helpers I'm playing around with will add more per-crtc stuff. It makes sense to also consolidate planes, just for consistency. In the future we can use this to store a pointer to the preceeding state, making an atomic update entirely free-standing. This will be needed to be able to queue them up with a depth > 1. Cc: Gustavo Padovan Reviewed-by: Maarten Lankhorst Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-11-git-send-email-daniel.vetter@ffwll.ch --- include/drm/drm_atomic.h | 14 +++++++------- include/drm/drm_crtc.h | 11 +++++++---- 2 files changed, 14 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 37478adb6a16..8e616d39353b 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -86,7 +86,7 @@ static inline struct drm_plane_state * drm_atomic_get_existing_plane_state(struct drm_atomic_state *state, struct drm_plane *plane) { - return state->plane_states[drm_plane_index(plane)]; + return state->planes[drm_plane_index(plane)].state; } /** @@ -139,8 +139,8 @@ static inline const struct drm_plane_state * __drm_atomic_get_current_plane_state(struct drm_atomic_state *state, struct drm_plane *plane) { - if (state->plane_states[drm_plane_index(plane)]) - return state->plane_states[drm_plane_index(plane)]; + if (state->planes[drm_plane_index(plane)].state) + return state->planes[drm_plane_index(plane)].state; return plane->state; } @@ -191,11 +191,11 @@ int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state); (__i)++) \ for_each_if (crtc_state) -#define for_each_plane_in_state(state, plane, plane_state, __i) \ +#define for_each_plane_in_state(__state, plane, plane_state, __i) \ for ((__i) = 0; \ - (__i) < (state)->dev->mode_config.num_total_plane && \ - ((plane) = (state)->planes[__i], \ - (plane_state) = (state)->plane_states[__i], 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane && \ + ((plane) = (__state)->planes[__i].ptr, \ + (plane_state) = (__state)->planes[__i].state, 1); \ (__i)++) \ for_each_if (plane_state) static inline bool diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 751990a3bc7a..821398ce52d0 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1693,6 +1693,11 @@ struct drm_bridge { void *driver_private; }; +struct __drm_planes_state { + struct drm_plane *ptr; + struct drm_plane_state *state; +}; + struct __drm_connnectors_state { struct drm_connector *ptr; struct drm_connector_state *state; @@ -1704,8 +1709,7 @@ struct __drm_connnectors_state { * @allow_modeset: allow full modeset * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL. - * @planes: pointer to array of plane pointers - * @plane_states: pointer to array of plane states pointers + * @planes: pointer to array of structures with per-plane data * @crtcs: pointer to array of CRTC pointers * @crtc_states: pointer to array of CRTC states pointers * @num_connector: size of the @connectors and @connector_states arrays @@ -1717,8 +1721,7 @@ struct drm_atomic_state { bool allow_modeset : 1; bool legacy_cursor_update : 1; bool legacy_set_config : 1; - struct drm_plane **planes; - struct drm_plane_state **plane_states; + struct __drm_planes_state *planes; struct drm_crtc **crtcs; struct drm_crtc_state **crtc_states; int num_connector; -- cgit v1.2.3 From 5d943aa6c0d424f4d4a1c96fb2fa2a81e55e1e85 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 2 Jun 2016 00:06:34 +0200 Subject: drm: Consolidate crtc arrays in drm_atomic_state It's silly to have 2 mallocs when we could tie these two together. Also, Gustavo adds another one in his per-crtc out-fence patches. And I want to add more stuff here for nonblocking commit helpers. In the future we can use this to store a pointer to the preceeding state, making an atomic update entirely free-standing. This will be needed to be able to queue them up with a depth > 1. Cc: Gustavo Padovan Reviewed-by: Maarten Lankhorst Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-12-git-send-email-daniel.vetter@ffwll.ch --- include/drm/drm_atomic.h | 10 +++++----- include/drm/drm_crtc.h | 8 ++++++-- 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 8e616d39353b..d9504dfcd1cc 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -71,7 +71,7 @@ static inline struct drm_crtc_state * drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state, struct drm_crtc *crtc) { - return state->crtc_states[drm_crtc_index(crtc)]; + return state->crtcs[drm_crtc_index(crtc)].state; } /** @@ -183,11 +183,11 @@ int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state); (__i)++) \ for_each_if (connector) -#define for_each_crtc_in_state(state, crtc, crtc_state, __i) \ +#define for_each_crtc_in_state(__state, crtc, crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (state)->dev->mode_config.num_crtc && \ - ((crtc) = (state)->crtcs[__i], \ - (crtc_state) = (state)->crtc_states[__i], 1); \ + (__i) < (__state)->dev->mode_config.num_crtc && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (crtc_state) = (__state)->crtcs[__i].state, 1); \ (__i)++) \ for_each_if (crtc_state) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 821398ce52d0..07a410144b07 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1698,6 +1698,11 @@ struct __drm_planes_state { struct drm_plane_state *state; }; +struct __drm_crtcs_state { + struct drm_crtc *ptr; + struct drm_crtc_state *state; +}; + struct __drm_connnectors_state { struct drm_connector *ptr; struct drm_connector_state *state; @@ -1722,8 +1727,7 @@ struct drm_atomic_state { bool legacy_cursor_update : 1; bool legacy_set_config : 1; struct __drm_planes_state *planes; - struct drm_crtc **crtcs; - struct drm_crtc_state **crtc_states; + struct __drm_crtcs_state *crtcs; int num_connector; struct __drm_connnectors_state *connectors; -- cgit v1.2.3 From 60c9e19003763cf2f234f30411c7bafa82dd1c65 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 2 Jun 2016 17:39:14 +0200 Subject: drm/atomic-docs: Spelling fixups Eric nicely pointed these out, but I failed at git add and lost them. This fixes up commit 2f196b7c4b82eeff3574eb2999e78add33ef4361 Author: Daniel Vetter Date: Thu Jun 2 16:21:44 2016 +0200 drm/atomic: Add drm_atomic_crtc_state_for_each_plane_state to actually do what it says on the tin^Wcommit message. Signed-off-by: Daniel Vetter --- include/drm/drm_atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index d9504dfcd1cc..d12cfb9c6062 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -124,9 +124,9 @@ drm_atomic_get_existing_connector_state(struct drm_atomic_state *state, * * Note that this function is in general unsafe since it doesn't check for the * required locking for access state structures. Drivers must ensure that it is - * save to access the returned state structure through other means. One commone + * safe to access the returned state structure through other means. One common * example is when planes are fixed to a single CRTC, and the driver knows that - * the CRTC locks is held already. In that case holding the CRTC locks gives a + * the CRTC lock is held already. In that case holding the CRTC lock gives a * read-lock on all planes connected to that CRTC. But if planes can be * reassigned things get more tricky. In that case it's better to use * drm_atomic_get_plane_state and wire up full error handling. -- cgit v1.2.3 From 8cfc8ddc99df9509a46043b14af81f5c6a223eab Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Thu, 18 Feb 2016 22:04:22 +0800 Subject: pstore: add lzo/lz4 compression support Like zlib compression in pstore, this patch added lzo and lz4 compression support so that users can have more options and better compression ratio. The original code treats the compressed data together with the uncompressed ECC correction notice by using zlib decompress. The ECC correction notice is missing in the decompression process. The treatment also makes lzo and lz4 not working. So I treat them separately by using pstore_decompress() to treat the compressed data, and memcpy() to treat the uncompressed ECC correction notice. Signed-off-by: Geliang Tang Signed-off-by: Kees Cook --- include/linux/pstore.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pstore.h b/include/linux/pstore.h index 831479f8df8f..899e95e84400 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -58,7 +58,8 @@ struct pstore_info { int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, int *count, struct timespec *time, char **buf, - bool *compressed, struct pstore_info *psi); + bool *compressed, ssize_t *ecc_notice_size, + struct pstore_info *psi); int (*write)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, unsigned int part, int count, bool compressed, -- cgit v1.2.3 From e788892ba3cc71d385b75895f7a375fbc659ce86 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 Jun 2016 23:24:15 +0200 Subject: cpufreq: governor: Get rid of governor events The design of the cpufreq governor API is not very straightforward, as struct cpufreq_governor provides only one callback to be invoked from different code paths for different purposes. The purpose it is invoked for is determined by its second "event" argument, causing it to act as a "callback multiplexer" of sorts. Unfortunately, that leads to extra complexity in governors, some of which implement the ->governor() callback as a switch statement that simply checks the event argument and invokes a separate function to handle that specific event. That extra complexity can be eliminated by replacing the all-purpose ->governor() callback with a family of callbacks to carry out specific governor operations: initialization and exit, start and stop and policy limits updates. That also turns out to reduce the code size too, so do it. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar --- include/linux/cpufreq.h | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 4e81e08db752..5bcda3e6aa9e 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -455,18 +455,14 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div, #define MIN_LATENCY_MULTIPLIER (20) #define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000) -/* Governor Events */ -#define CPUFREQ_GOV_START 1 -#define CPUFREQ_GOV_STOP 2 -#define CPUFREQ_GOV_LIMITS 3 -#define CPUFREQ_GOV_POLICY_INIT 4 -#define CPUFREQ_GOV_POLICY_EXIT 5 - struct cpufreq_governor { char name[CPUFREQ_NAME_LEN]; int initialized; - int (*governor) (struct cpufreq_policy *policy, - unsigned int event); + int (*init)(struct cpufreq_policy *policy); + void (*exit)(struct cpufreq_policy *policy); + int (*start)(struct cpufreq_policy *policy); + void (*stop)(struct cpufreq_policy *policy); + void (*limits)(struct cpufreq_policy *policy); ssize_t (*show_setspeed) (struct cpufreq_policy *policy, char *buf); int (*store_setspeed) (struct cpufreq_policy *policy, -- cgit v1.2.3 From bf2be2de8493dd5f86d6e0f0d4eecb5810ad035b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 18 May 2016 17:55:31 +0530 Subject: cpufreq: governor: Create cpufreq_policy_apply_limits() Create a new helper to avoid code duplication across governors. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- include/linux/cpufreq.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 5bcda3e6aa9e..3be54a0b4373 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -489,6 +489,14 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor); struct cpufreq_governor *cpufreq_default_governor(void); struct cpufreq_governor *cpufreq_fallback_governor(void); +static inline void cpufreq_policy_apply_limits(struct cpufreq_policy *policy) +{ + if (policy->max < policy->cur) + __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); + else if (policy->min > policy->cur) + __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); +} + /* Governor attribute set */ struct gov_attr_set { struct kobject kobj; -- cgit v1.2.3 From 9a15fb2c797a15524e63eacb10bd6cd68a99e830 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 18 May 2016 22:59:49 +0200 Subject: cpufreq: Drop the 'initialized' field from struct cpufreq_governor The 'initialized' field in struct cpufreq_governor is only used by the conservative governor (as a usage counter) and the way that happens is far from straightforward and arguably incorrect. Namely, the value of 'initialized' is checked by cpufreq_dbs_governor_init() and cpufreq_dbs_governor_exit() and the results of those checks are passed (as the second argument) to the ->init() and ->exit() callbacks in struct dbs_governor. Those callbacks are only implemented by the ondemand and conservative governors and ondemand doesn't use their second argument at all. In turn, the conservative governor uses it to decide whether or not to either register or unregister a transition notifier. That whole mechanism is not only unnecessarily convoluted, but also racy, because the 'initialized' field of struct cpufreq_governor is updated in cpufreq_init_governor() and cpufreq_exit_governor() under policy->rwsem which doesn't help if one of these functions is run twice in parallel for different policies (which isn't impossible in principle), for example. Instead of it, add a proper usage counter to the conservative governor and update it from cs_init() and cs_exit() which is guaranteed to be non-racy, as those functions are only called under gov_dbs_data_mutex which is global. With that in place, drop the 'initialized' field from struct cpufreq_governor as it is not used any more. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar --- include/linux/cpufreq.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 3be54a0b4373..fbd696edf5bd 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -457,7 +457,6 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div, struct cpufreq_governor { char name[CPUFREQ_NAME_LEN]; - int initialized; int (*init)(struct cpufreq_policy *policy); void (*exit)(struct cpufreq_policy *policy); int (*start)(struct cpufreq_policy *policy); -- cgit v1.2.3 From 1aefc75b2449eb68a6fc3ca932e2a4ee353b748d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 31 May 2016 22:14:44 +0200 Subject: cpufreq: stats: Make the stats code non-modular The modularity of cpufreq_stats is quite problematic. First off, the usage of policy notifiers for the initialization and cleanup in the cpufreq_stats module is inherently racy with respect to CPU offline/online and the initialization and cleanup of the cpufreq driver. Second, fast frequency switching (used by the schedutil governor) cannot be enabled if any transition notifiers are registered, so if the cpufreq_stats module (that registers a transition notifier for updating transition statistics) is loaded, the schedutil governor cannot use fast frequency switching. On the other hand, allowing cpufreq_stats to be built as a module doesn't really add much value. Arguably, there's not much reason for that code to be modular at all. For the above reasons, make the cpufreq stats code non-modular, modify the core to invoke functions provided by that code directly and drop the notifiers from it. Make the stats sysfs attributes appear empty if fast frequency switching is enabled as the statistics will not be updated in that case anyway (and returning -EBUSY from those attributes breaks powertop). While at it, clean up Kconfig help for the CPU_FREQ_STAT and CPU_FREQ_STAT_DETAILS options. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar --- include/linux/cpufreq.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index fbd696edf5bd..7ed93c310c08 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -185,6 +185,18 @@ static inline unsigned int cpufreq_quick_get_max(unsigned int cpu) static inline void disable_cpufreq(void) { } #endif +#ifdef CONFIG_CPU_FREQ_STAT +void cpufreq_stats_create_table(struct cpufreq_policy *policy); +void cpufreq_stats_free_table(struct cpufreq_policy *policy); +void cpufreq_stats_record_transition(struct cpufreq_policy *policy, + unsigned int new_freq); +#else +static inline void cpufreq_stats_create_table(struct cpufreq_policy *policy) { } +static inline void cpufreq_stats_free_table(struct cpufreq_policy *policy) { } +static inline void cpufreq_stats_record_transition(struct cpufreq_policy *policy, + unsigned int new_freq) { } +#endif /* CONFIG_CPU_FREQ_STAT */ + /********************************************************************* * CPUFREQ DRIVER INTERFACE * *********************************************************************/ -- cgit v1.2.3 From 1b47aaf9a93a69a61f8cc5219fd9c758b8588a59 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 2 Jun 2016 00:06:35 +0200 Subject: drm/fence: add fence to drm_pending_event Now a drm_pending_event can either send a real drm_event or signal a fence, or both. It allow us to signal via fences when the buffer is displayed on the screen. Which in turn means that the previous buffer is not in use anymore and can be freed or sent back to another driver for processing. v2: Comments from Daniel Vetter - call fence_signal in drm_send_event_locked() - remove unneeded !e->event check v3: Remove drm_pending_event->destroy to fix a leak when e->file_priv is not set. Reviewed-by: Sean Paul Signed-off-by: Gustavo Padovan (v2) [danvet: fix one e->destroy in arcpgu due to rebasing.] Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-13-git-send-email-daniel.vetter@ffwll.ch --- include/drm/drmP.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 00518289105f..9e5eefd6f733 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -57,6 +57,7 @@ #include #include #include +#include #include #include @@ -283,12 +284,12 @@ struct drm_ioctl_desc { /* Event queued up for userspace to read */ struct drm_pending_event { struct drm_event *event; + struct fence *fence; struct list_head link; struct list_head pending_link; struct drm_file *file_priv; pid_t pid; /* pid of requester, no guarantee it's valid by the time we deliver the event, for tracing only */ - void (*destroy)(struct drm_pending_event *event); }; /* initial implementaton using a linked list - todo hashtab */ -- cgit v1.2.3 From 490d3d1b91201fd3d3d01d64e11df4eac1d92bd4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 27 May 2016 20:05:00 +0100 Subject: drm: Store the plane's index MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the plane's index is determined by walking the list of all planes in the mode and finding the position of that plane in the list. A linear walk, especially a linear walk within a linear walk as frequently conceived by i915.ko [O(N^2)] quickly comes to dominate profiles. The plane's index is constant for as long as no earlier planes are removed from the list. For all drivers, planes are static, determined at boot and then untouched until shutdown. In fact, there is no locking provided to allow for dynamic removal of planes/encoders/crtcs. v2: Convert drm_crtc_index() and drm_encoder_index() as well. v3: Stop adjusting the indices upon removal; consider the list construct-only. Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Matt Roper Cc: Ville Syrjälä Reviewed-by: Matt Roper [danvet: Fixup typo in kerneldoc that Matt spotted.] Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1464375900-2542-1-git-send-email-chris@chris-wilson.co.uk --- include/drm/drm_crtc.h | 49 ++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 46 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 07a410144b07..e690021ce4cc 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -753,6 +753,9 @@ struct drm_crtc { struct drm_plane *primary; struct drm_plane *cursor; + /* position inside the mode_config.list, can be used as a [] idx */ + unsigned index; + /* position of cursor plane on crtc */ int cursor_x; int cursor_y; @@ -1097,6 +1100,10 @@ struct drm_encoder { struct drm_mode_object base; char *name; int encoder_type; + + /* position inside the mode_config.list, can be used as a [] idx */ + unsigned index; + uint32_t possible_crtcs; uint32_t possible_clones; @@ -1543,6 +1550,9 @@ struct drm_plane { enum drm_plane_type type; + /* position inside the mode_config.list, can be used as a [] idx */ + unsigned index; + const struct drm_plane_helper_funcs *helper_private; struct drm_plane_state *state; @@ -2240,7 +2250,18 @@ int drm_crtc_init_with_planes(struct drm_device *dev, const struct drm_crtc_funcs *funcs, const char *name, ...); extern void drm_crtc_cleanup(struct drm_crtc *crtc); -extern unsigned int drm_crtc_index(struct drm_crtc *crtc); + +/** + * drm_crtc_index - find the index of a registered CRTC + * @crtc: CRTC to find index for + * + * Given a registered CRTC, return the index of that CRTC within a DRM + * device's list of CRTCs. + */ +static inline unsigned int drm_crtc_index(struct drm_crtc *crtc) +{ + return crtc->index; +} /** * drm_crtc_mask - find the mask of a registered CRTC @@ -2294,7 +2315,18 @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type, const char *name, ...); -extern unsigned int drm_encoder_index(struct drm_encoder *encoder); + +/** + * drm_encoder_index - find the index of a registered encoder + * @encoder: encoder to find index for + * + * Given a registered encoder, return the index of that encoder within a DRM + * device's list of encoders. + */ +static inline unsigned int drm_encoder_index(struct drm_encoder *encoder) +{ + return encoder->index; +} /** * drm_encoder_crtc_ok - can a given crtc drive a given encoder? @@ -2325,7 +2357,18 @@ extern int drm_plane_init(struct drm_device *dev, const uint32_t *formats, unsigned int format_count, bool is_primary); extern void drm_plane_cleanup(struct drm_plane *plane); -extern unsigned int drm_plane_index(struct drm_plane *plane); + +/** + * drm_plane_index - find the index of a registered plane + * @plane: plane to find index for + * + * Given a registered plane, return the index of that plane within a DRM + * device's list of planes. + */ +static inline unsigned int drm_plane_index(struct drm_plane *plane) +{ + return plane->index; +} extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx); extern void drm_plane_force_disable(struct drm_plane *plane); extern int drm_plane_check_pixel_format(const struct drm_plane *plane, -- cgit v1.2.3 From ccc12561926c0bef9a40865db93b926a0927e93f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 20 May 2016 20:40:26 +0530 Subject: regmap: irq: Add support to call client specific pre/post interrupt service Regmap irq implements the generic interrupt service routine which is common for most of devices. Some devices, like MAX77620, MAX20024 needs the special handling before and after servicing the interrupt as generic. For the example, MAX77620 programming guidelines for interrupt servicing says: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt accordingly. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. The step (2) is implemented in regmap irq as generic routine. For step (1) and (3), add callbacks from regmap irq to client driver to handle chip specific configurations. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- include/linux/regmap.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 3dc08ce15426..a0bfe481f9ab 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -851,6 +851,12 @@ struct regmap_irq { * @num_type_reg: Number of type registers. * @type_reg_stride: Stride to use for chips where type registers are not * contiguous. + * @handle_pre_irq: Driver specific callback to handle interrupt from device + * before regmap_irq_handler process the interrupts. + * @handle_post_irq: Driver specific callback to handle interrupt from device + * after handling the interrupts in regmap_irq_handler(). + * @irq_drv_data: Driver specific IRQ data which is passed as parameter when + * driver specific pre/post interrupt handler is called. */ struct regmap_irq_chip { const char *name; @@ -877,6 +883,10 @@ struct regmap_irq_chip { int num_type_reg; unsigned int type_reg_stride; + + int (*handle_pre_irq)(void *irq_drv_data); + int (*handle_post_irq)(void *irq_drv_data); + void *irq_drv_data; }; struct regmap_irq_chip_data; -- cgit v1.2.3 From 351a4dedb34cbeb9f747f0e2309e891b6fb906cb Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 2 Jun 2016 10:23:29 +0300 Subject: qed: Utilize FW 8.10.3.0 The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- include/linux/qed/common_hsi.h | 205 +++++++++++++++++++++++++++++------------ include/linux/qed/eth_common.h | 124 +++++++++++++++---------- include/linux/qed/qed_eth_if.h | 1 + 3 files changed, 222 insertions(+), 108 deletions(-) (limited to 'include') diff --git a/include/linux/qed/common_hsi.h b/include/linux/qed/common_hsi.h index 3f14c7efe68f..285189a5ea6d 100644 --- a/include/linux/qed/common_hsi.h +++ b/include/linux/qed/common_hsi.h @@ -13,9 +13,19 @@ #define X_FINAL_CLEANUP_AGG_INT 1 +/* Queue Zone sizes in bytes */ +#define TSTORM_QZONE_SIZE 8 +#define MSTORM_QZONE_SIZE 0 +#define USTORM_QZONE_SIZE 8 +#define XSTORM_QZONE_SIZE 8 +#define YSTORM_QZONE_SIZE 0 +#define PSTORM_QZONE_SIZE 0 + +#define ETH_MAX_NUM_RX_QUEUES_PER_VF 16 + #define FW_MAJOR_VERSION 8 -#define FW_MINOR_VERSION 7 -#define FW_REVISION_VERSION 3 +#define FW_MINOR_VERSION 10 +#define FW_REVISION_VERSION 5 #define FW_ENGINEERING_VERSION 0 /***********************/ @@ -97,45 +107,86 @@ #define DQ_XCM_AGG_VAL_SEL_REG6 7 /* XCM agg val selection */ -#define DQ_XCM_ETH_EDPM_NUM_BDS_CMD \ - DQ_XCM_AGG_VAL_SEL_WORD2 -#define DQ_XCM_ETH_TX_BD_CONS_CMD \ - DQ_XCM_AGG_VAL_SEL_WORD3 -#define DQ_XCM_CORE_TX_BD_CONS_CMD \ - DQ_XCM_AGG_VAL_SEL_WORD3 -#define DQ_XCM_ETH_TX_BD_PROD_CMD \ - DQ_XCM_AGG_VAL_SEL_WORD4 -#define DQ_XCM_CORE_TX_BD_PROD_CMD \ - DQ_XCM_AGG_VAL_SEL_WORD4 -#define DQ_XCM_CORE_SPQ_PROD_CMD \ - DQ_XCM_AGG_VAL_SEL_WORD4 -#define DQ_XCM_ETH_GO_TO_BD_CONS_CMD DQ_XCM_AGG_VAL_SEL_WORD5 +#define DQ_XCM_CORE_TX_BD_CONS_CMD DQ_XCM_AGG_VAL_SEL_WORD3 +#define DQ_XCM_CORE_TX_BD_PROD_CMD DQ_XCM_AGG_VAL_SEL_WORD4 +#define DQ_XCM_CORE_SPQ_PROD_CMD DQ_XCM_AGG_VAL_SEL_WORD4 +#define DQ_XCM_ETH_EDPM_NUM_BDS_CMD DQ_XCM_AGG_VAL_SEL_WORD2 +#define DQ_XCM_ETH_TX_BD_CONS_CMD DQ_XCM_AGG_VAL_SEL_WORD3 +#define DQ_XCM_ETH_TX_BD_PROD_CMD DQ_XCM_AGG_VAL_SEL_WORD4 +#define DQ_XCM_ETH_GO_TO_BD_CONS_CMD DQ_XCM_AGG_VAL_SEL_WORD5 + +/* UCM agg val selection (HW) */ +#define DQ_UCM_AGG_VAL_SEL_WORD0 0 +#define DQ_UCM_AGG_VAL_SEL_WORD1 1 +#define DQ_UCM_AGG_VAL_SEL_WORD2 2 +#define DQ_UCM_AGG_VAL_SEL_WORD3 3 +#define DQ_UCM_AGG_VAL_SEL_REG0 4 +#define DQ_UCM_AGG_VAL_SEL_REG1 5 +#define DQ_UCM_AGG_VAL_SEL_REG2 6 +#define DQ_UCM_AGG_VAL_SEL_REG3 7 + +/* UCM agg val selection (FW) */ +#define DQ_UCM_ETH_PMD_TX_CONS_CMD DQ_UCM_AGG_VAL_SEL_WORD2 +#define DQ_UCM_ETH_PMD_RX_CONS_CMD DQ_UCM_AGG_VAL_SEL_WORD3 +#define DQ_UCM_ROCE_CQ_CONS_CMD DQ_UCM_AGG_VAL_SEL_REG0 +#define DQ_UCM_ROCE_CQ_PROD_CMD DQ_UCM_AGG_VAL_SEL_REG2 + +/* TCM agg val selection (HW) */ +#define DQ_TCM_AGG_VAL_SEL_WORD0 0 +#define DQ_TCM_AGG_VAL_SEL_WORD1 1 +#define DQ_TCM_AGG_VAL_SEL_WORD2 2 +#define DQ_TCM_AGG_VAL_SEL_WORD3 3 +#define DQ_TCM_AGG_VAL_SEL_REG1 4 +#define DQ_TCM_AGG_VAL_SEL_REG2 5 +#define DQ_TCM_AGG_VAL_SEL_REG6 6 +#define DQ_TCM_AGG_VAL_SEL_REG9 7 + +/* TCM agg val selection (FW) */ +#define DQ_TCM_L2B_BD_PROD_CMD \ + DQ_TCM_AGG_VAL_SEL_WORD1 +#define DQ_TCM_ROCE_RQ_PROD_CMD \ + DQ_TCM_AGG_VAL_SEL_WORD0 /* XCM agg counter flag selection */ -#define DQ_XCM_AGG_FLG_SHIFT_BIT14 0 -#define DQ_XCM_AGG_FLG_SHIFT_BIT15 1 -#define DQ_XCM_AGG_FLG_SHIFT_CF12 2 -#define DQ_XCM_AGG_FLG_SHIFT_CF13 3 -#define DQ_XCM_AGG_FLG_SHIFT_CF18 4 -#define DQ_XCM_AGG_FLG_SHIFT_CF19 5 -#define DQ_XCM_AGG_FLG_SHIFT_CF22 6 -#define DQ_XCM_AGG_FLG_SHIFT_CF23 7 +#define DQ_XCM_AGG_FLG_SHIFT_BIT14 0 +#define DQ_XCM_AGG_FLG_SHIFT_BIT15 1 +#define DQ_XCM_AGG_FLG_SHIFT_CF12 2 +#define DQ_XCM_AGG_FLG_SHIFT_CF13 3 +#define DQ_XCM_AGG_FLG_SHIFT_CF18 4 +#define DQ_XCM_AGG_FLG_SHIFT_CF19 5 +#define DQ_XCM_AGG_FLG_SHIFT_CF22 6 +#define DQ_XCM_AGG_FLG_SHIFT_CF23 7 /* XCM agg counter flag selection */ -#define DQ_XCM_ETH_DQ_CF_CMD (1 << \ - DQ_XCM_AGG_FLG_SHIFT_CF18) -#define DQ_XCM_CORE_DQ_CF_CMD (1 << \ - DQ_XCM_AGG_FLG_SHIFT_CF18) -#define DQ_XCM_ETH_TERMINATE_CMD (1 << \ - DQ_XCM_AGG_FLG_SHIFT_CF19) -#define DQ_XCM_CORE_TERMINATE_CMD (1 << \ - DQ_XCM_AGG_FLG_SHIFT_CF19) -#define DQ_XCM_ETH_SLOW_PATH_CMD (1 << \ - DQ_XCM_AGG_FLG_SHIFT_CF22) -#define DQ_XCM_CORE_SLOW_PATH_CMD (1 << \ - DQ_XCM_AGG_FLG_SHIFT_CF22) -#define DQ_XCM_ETH_TPH_EN_CMD (1 << \ - DQ_XCM_AGG_FLG_SHIFT_CF23) +#define DQ_XCM_CORE_DQ_CF_CMD (1 << DQ_XCM_AGG_FLG_SHIFT_CF18) +#define DQ_XCM_CORE_TERMINATE_CMD (1 << DQ_XCM_AGG_FLG_SHIFT_CF19) +#define DQ_XCM_CORE_SLOW_PATH_CMD (1 << DQ_XCM_AGG_FLG_SHIFT_CF22) +#define DQ_XCM_ETH_DQ_CF_CMD (1 << DQ_XCM_AGG_FLG_SHIFT_CF18) +#define DQ_XCM_ETH_TERMINATE_CMD (1 << DQ_XCM_AGG_FLG_SHIFT_CF19) +#define DQ_XCM_ETH_SLOW_PATH_CMD (1 << DQ_XCM_AGG_FLG_SHIFT_CF22) +#define DQ_XCM_ETH_TPH_EN_CMD (1 << DQ_XCM_AGG_FLG_SHIFT_CF23) + +/* UCM agg counter flag selection (HW) */ +#define DQ_UCM_AGG_FLG_SHIFT_CF0 0 +#define DQ_UCM_AGG_FLG_SHIFT_CF1 1 +#define DQ_UCM_AGG_FLG_SHIFT_CF3 2 +#define DQ_UCM_AGG_FLG_SHIFT_CF4 3 +#define DQ_UCM_AGG_FLG_SHIFT_CF5 4 +#define DQ_UCM_AGG_FLG_SHIFT_CF6 5 +#define DQ_UCM_AGG_FLG_SHIFT_RULE0EN 6 +#define DQ_UCM_AGG_FLG_SHIFT_RULE1EN 7 + +/* UCM agg counter flag selection (FW) */ +#define DQ_UCM_ETH_PMD_TX_ARM_CMD (1 << DQ_UCM_AGG_FLG_SHIFT_CF4) +#define DQ_UCM_ETH_PMD_RX_ARM_CMD (1 << DQ_UCM_AGG_FLG_SHIFT_CF5) + +#define DQ_REGION_SHIFT (12) + +/* DPM */ +#define DQ_DPM_WQE_BUFF_SIZE (320) + +/* Conn type ranges */ +#define DQ_CONN_TYPE_RANGE_SHIFT (4) /*****************/ /* QM CONSTANTS */ @@ -282,8 +333,6 @@ (PXP_EXTERNAL_BAR_GLOBAL_WINDOW_START + \ PXP_EXTERNAL_BAR_GLOBAL_WINDOW_LENGTH - 1) -#define PXP_ILT_PAGE_SIZE_NUM_BITS_MIN 12 -#define PXP_ILT_BLOCK_FACTOR_MULTIPLIER 1024 #define PXP_VF_BAR0_START_IGU 0 #define PXP_VF_BAR0_IGU_LENGTH 0x3000 @@ -342,6 +391,9 @@ #define PXP_VF_BAR0_GRC_WINDOW_LENGTH 32 +#define PXP_ILT_PAGE_SIZE_NUM_BITS_MIN 12 +#define PXP_ILT_BLOCK_FACTOR_MULTIPLIER 1024 + /* ILT Records */ #define PXP_NUM_ILT_RECORDS_BB 7600 #define PXP_NUM_ILT_RECORDS_K2 11000 @@ -379,6 +431,38 @@ struct async_data { u8 fw_debug_param; }; +struct coalescing_timeset { + u8 value; +#define COALESCING_TIMESET_TIMESET_MASK 0x7F +#define COALESCING_TIMESET_TIMESET_SHIFT 0 +#define COALESCING_TIMESET_VALID_MASK 0x1 +#define COALESCING_TIMESET_VALID_SHIFT 7 +}; + +struct common_prs_pf_msg_info { + __le32 value; +#define COMMON_PRS_PF_MSG_INFO_NPAR_DEFAULT_PF_MASK 0x1 +#define COMMON_PRS_PF_MSG_INFO_NPAR_DEFAULT_PF_SHIFT 0 +#define COMMON_PRS_PF_MSG_INFO_FW_DEBUG_1_MASK 0x1 +#define COMMON_PRS_PF_MSG_INFO_FW_DEBUG_1_SHIFT 1 +#define COMMON_PRS_PF_MSG_INFO_FW_DEBUG_2_MASK 0x1 +#define COMMON_PRS_PF_MSG_INFO_FW_DEBUG_2_SHIFT 2 +#define COMMON_PRS_PF_MSG_INFO_FW_DEBUG_3_MASK 0x1 +#define COMMON_PRS_PF_MSG_INFO_FW_DEBUG_3_SHIFT 3 +#define COMMON_PRS_PF_MSG_INFO_RESERVED_MASK 0xFFFFFFF +#define COMMON_PRS_PF_MSG_INFO_RESERVED_SHIFT 4 +}; + +struct common_queue_zone { + __le16 ring_drv_data_consumer; + __le16 reserved; +}; + +struct eth_rx_prod_data { + __le16 bd_prod; + __le16 cqe_prod; +}; + struct regpair { __le32 lo; __le32 hi; @@ -388,11 +472,23 @@ struct vf_pf_channel_eqe_data { struct regpair msg_addr; }; +struct malicious_vf_eqe_data { + u8 vf_id; + u8 err_id; + __le16 reserved[3]; +}; + +struct initial_cleanup_eqe_data { + u8 vf_id; + u8 reserved[7]; +}; + /* Event Data Union */ union event_ring_data { - u8 bytes[8]; - struct vf_pf_channel_eqe_data vf_pf_channel; - struct async_data async_info; + u8 bytes[8]; + struct vf_pf_channel_eqe_data vf_pf_channel; + struct malicious_vf_eqe_data malicious_vf; + struct initial_cleanup_eqe_data vf_init_cleanup; }; /* Event Ring Entry */ @@ -433,6 +529,16 @@ enum protocol_type { MAX_PROTOCOL_TYPE }; +struct ustorm_eth_queue_zone { + struct coalescing_timeset int_coalescing_timeset; + u8 reserved[3]; +}; + +struct ustorm_queue_zone { + struct ustorm_eth_queue_zone eth; + struct common_queue_zone common; +}; + /* status block structure */ struct cau_pi_entry { u32 prod; @@ -683,19 +789,4 @@ struct status_block { #define STATUS_BLOCK_ZERO_PAD3_SHIFT 24 }; -struct tunnel_parsing_flags { - u8 flags; -#define TUNNEL_PARSING_FLAGS_TYPE_MASK 0x3 -#define TUNNEL_PARSING_FLAGS_TYPE_SHIFT 0 -#define TUNNEL_PARSING_FLAGS_TENNANT_ID_EXIST_MASK 0x1 -#define TUNNEL_PARSING_FLAGS_TENNANT_ID_EXIST_SHIFT 2 -#define TUNNEL_PARSING_FLAGS_NEXT_PROTOCOL_MASK 0x3 -#define TUNNEL_PARSING_FLAGS_NEXT_PROTOCOL_SHIFT 3 -#define TUNNEL_PARSING_FLAGS_FIRSTHDRIPMATCH_MASK 0x1 -#define TUNNEL_PARSING_FLAGS_FIRSTHDRIPMATCH_SHIFT 5 -#define TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_MASK 0x1 -#define TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_SHIFT 6 -#define TUNNEL_PARSING_FLAGS_IPV4_OPTIONS_MASK 0x1 -#define TUNNEL_PARSING_FLAGS_IPV4_OPTIONS_SHIFT 7 -}; #endif /* __COMMON_HSI__ */ diff --git a/include/linux/qed/eth_common.h b/include/linux/qed/eth_common.h index 092cb0c1afcb..b5ebc697d05f 100644 --- a/include/linux/qed/eth_common.h +++ b/include/linux/qed/eth_common.h @@ -12,6 +12,8 @@ /********************/ /* ETH FW CONSTANTS */ /********************/ +#define ETH_HSI_VER_MAJOR 3 +#define ETH_HSI_VER_MINOR 0 #define ETH_CACHE_LINE_SIZE 64 #define ETH_MAX_RAMROD_PER_CON 8 @@ -57,19 +59,6 @@ #define ETH_TPA_CQE_CONT_LEN_LIST_SIZE 6 #define ETH_TPA_CQE_END_LEN_LIST_SIZE 4 -/* Queue Zone sizes */ -#define TSTORM_QZONE_SIZE 0 -#define MSTORM_QZONE_SIZE sizeof(struct mstorm_eth_queue_zone) -#define USTORM_QZONE_SIZE sizeof(struct ustorm_eth_queue_zone) -#define XSTORM_QZONE_SIZE 0 -#define YSTORM_QZONE_SIZE sizeof(struct ystorm_eth_queue_zone) -#define PSTORM_QZONE_SIZE 0 - -/* Interrupt coalescing TimeSet */ -struct coalescing_timeset { - u8 timeset; - u8 valid; -}; struct eth_tx_1st_bd_flags { u8 bitfields; @@ -97,12 +86,12 @@ struct eth_tx_data_1st_bd { u8 nbds; struct eth_tx_1st_bd_flags bd_flags; __le16 bitfields; -#define ETH_TX_DATA_1ST_BD_TUNN_CFG_OVERRIDE_MASK 0x1 -#define ETH_TX_DATA_1ST_BD_TUNN_CFG_OVERRIDE_SHIFT 0 +#define ETH_TX_DATA_1ST_BD_TUNN_FLAG_MASK 0x1 +#define ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT 0 #define ETH_TX_DATA_1ST_BD_RESERVED0_MASK 0x1 #define ETH_TX_DATA_1ST_BD_RESERVED0_SHIFT 1 -#define ETH_TX_DATA_1ST_BD_FW_USE_ONLY_MASK 0x3FFF -#define ETH_TX_DATA_1ST_BD_FW_USE_ONLY_SHIFT 2 +#define ETH_TX_DATA_1ST_BD_PKT_LEN_MASK 0x3FFF +#define ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT 2 }; /* The parsing information data for the second tx bd of a given packet. */ @@ -136,28 +125,51 @@ struct eth_tx_data_2nd_bd { #define ETH_TX_DATA_2ND_BD_RESERVED0_SHIFT 13 }; +struct eth_fast_path_cqe_fw_debug { + u8 reserved0; + u8 reserved1; + __le16 reserved2; +}; + +/* tunneling parsing flags */ +struct eth_tunnel_parsing_flags { + u8 flags; +#define ETH_TUNNEL_PARSING_FLAGS_TYPE_MASK 0x3 +#define ETH_TUNNEL_PARSING_FLAGS_TYPE_SHIFT 0 +#define ETH_TUNNEL_PARSING_FLAGS_TENNANT_ID_EXIST_MASK 0x1 +#define ETH_TUNNEL_PARSING_FLAGS_TENNANT_ID_EXIST_SHIFT 2 +#define ETH_TUNNEL_PARSING_FLAGS_NEXT_PROTOCOL_MASK 0x3 +#define ETH_TUNNEL_PARSING_FLAGS_NEXT_PROTOCOL_SHIFT 3 +#define ETH_TUNNEL_PARSING_FLAGS_FIRSTHDRIPMATCH_MASK 0x1 +#define ETH_TUNNEL_PARSING_FLAGS_FIRSTHDRIPMATCH_SHIFT 5 +#define ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_MASK 0x1 +#define ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_SHIFT 6 +#define ETH_TUNNEL_PARSING_FLAGS_IPV4_OPTIONS_MASK 0x1 +#define ETH_TUNNEL_PARSING_FLAGS_IPV4_OPTIONS_SHIFT 7 +}; + /* Regular ETH Rx FP CQE. */ struct eth_fast_path_rx_reg_cqe { - u8 type; - u8 bitfields; + u8 type; + u8 bitfields; #define ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE_MASK 0x7 #define ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE_SHIFT 0 #define ETH_FAST_PATH_RX_REG_CQE_TC_MASK 0xF #define ETH_FAST_PATH_RX_REG_CQE_TC_SHIFT 3 #define ETH_FAST_PATH_RX_REG_CQE_RESERVED0_MASK 0x1 #define ETH_FAST_PATH_RX_REG_CQE_RESERVED0_SHIFT 7 - __le16 pkt_len; - struct parsing_and_err_flags pars_flags; - __le16 vlan_tag; - __le32 rss_hash; - __le16 len_on_first_bd; - u8 placement_offset; - struct tunnel_parsing_flags tunnel_pars_flags; - u8 bd_num; - u8 reserved[7]; - u32 fw_debug; - u8 reserved1[3]; - u8 flags; + __le16 pkt_len; + struct parsing_and_err_flags pars_flags; + __le16 vlan_tag; + __le32 rss_hash; + __le16 len_on_first_bd; + u8 placement_offset; + struct eth_tunnel_parsing_flags tunnel_pars_flags; + u8 bd_num; + u8 reserved[7]; + struct eth_fast_path_cqe_fw_debug fw_debug; + u8 reserved1[3]; + u8 flags; #define ETH_FAST_PATH_RX_REG_CQE_VALID_MASK 0x1 #define ETH_FAST_PATH_RX_REG_CQE_VALID_SHIFT 0 #define ETH_FAST_PATH_RX_REG_CQE_VALID_TOGGLE_MASK 0x1 @@ -207,11 +219,11 @@ struct eth_fast_path_rx_tpa_start_cqe { __le32 rss_hash; __le16 len_on_first_bd; u8 placement_offset; - struct tunnel_parsing_flags tunnel_pars_flags; + struct eth_tunnel_parsing_flags tunnel_pars_flags; u8 tpa_agg_index; u8 header_len; __le16 ext_bd_len_list[ETH_TPA_CQE_START_LEN_LIST_SIZE]; - u32 fw_debug; + struct eth_fast_path_cqe_fw_debug fw_debug; }; /* The L4 pseudo checksum mode for Ethernet */ @@ -264,12 +276,25 @@ enum eth_rx_cqe_type { MAX_ETH_RX_CQE_TYPE }; -/* ETH Rx producers data */ -struct eth_rx_prod_data { - __le16 bd_prod; - __le16 cqe_prod; - __le16 reserved; - __le16 reserved1; +enum eth_rx_tunn_type { + ETH_RX_NO_TUNN, + ETH_RX_TUNN_GENEVE, + ETH_RX_TUNN_GRE, + ETH_RX_TUNN_VXLAN, + MAX_ETH_RX_TUNN_TYPE +}; + +/* Aggregation end reason. */ +enum eth_tpa_end_reason { + ETH_AGG_END_UNUSED, + ETH_AGG_END_SP_UPDATE, + ETH_AGG_END_MAX_LEN, + ETH_AGG_END_LAST_SEG, + ETH_AGG_END_TIMEOUT, + ETH_AGG_END_NOT_CONSISTENT, + ETH_AGG_END_OUT_OF_ORDER, + ETH_AGG_END_NON_TPA_SEG, + MAX_ETH_TPA_END_REASON }; /* The first tx bd of a given packet */ @@ -337,21 +362,18 @@ union eth_tx_bd_types { }; /* Mstorm Queue Zone */ -struct mstorm_eth_queue_zone { - struct eth_rx_prod_data rx_producers; - __le32 reserved[2]; -}; - -/* Ustorm Queue Zone */ -struct ustorm_eth_queue_zone { - struct coalescing_timeset int_coalescing_timeset; - __le16 reserved[3]; +enum eth_tx_tunn_type { + ETH_TX_TUNN_GENEVE, + ETH_TX_TUNN_TTAG, + ETH_TX_TUNN_GRE, + ETH_TX_TUNN_VXLAN, + MAX_ETH_TX_TUNN_TYPE }; /* Ystorm Queue Zone */ -struct ystorm_eth_queue_zone { - struct coalescing_timeset int_coalescing_timeset; - __le16 reserved[3]; +struct xstorm_eth_queue_zone { + struct coalescing_timeset int_coalescing_timeset; + u8 reserved[7]; }; /* ETH doorbell data */ diff --git a/include/linux/qed/qed_eth_if.h b/include/linux/qed/qed_eth_if.h index 6ae8cb4a61d3..f8ff71126d9e 100644 --- a/include/linux/qed/qed_eth_if.h +++ b/include/linux/qed/qed_eth_if.h @@ -113,6 +113,7 @@ struct qed_queue_start_common_params { u8 vport_id; u16 sb; u16 sb_idx; + u16 vf_qid; }; struct qed_tunn_params { -- cgit v1.2.3 From 3f03396918962b2f8b888d02b23cd1e0c88bf5e5 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 24 May 2016 09:16:06 +0200 Subject: media: vb2-dma-contig: add helper for setting dma max seg size Add a helper function for device drivers to set DMA's max_seg_size. Setting it to largest possible value lets DMA-mapping API always create contiguous mappings in DMA address space. This is essential for all devices, which use dma-contig videobuf2 memory allocator and shared buffers. Till now, the only case when vb2-dma-contig really 'worked' was a case where userspace provided USERPTR buffer, which was in fact mmaped contiguous buffer from the other v4l2/drm device. Also DMABUF made of contiguous buffer worked only when its exporter did not split it into several chunks in the scatter-list. Any other buffer failed, regardless of the arch/platform used and the presence of the IOMMU of the device bus. This patch provides interface to fix this issue. Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki --- include/media/videobuf2-dma-contig.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h index 2087c9a68be3..f7dc8401817e 100644 --- a/include/media/videobuf2-dma-contig.h +++ b/include/media/videobuf2-dma-contig.h @@ -35,6 +35,8 @@ static inline void *vb2_dma_contig_init_ctx(struct device *dev) } void vb2_dma_contig_cleanup_ctx(void *alloc_ctx); +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size); +void vb2_dma_contig_clear_max_seg_size(struct device *dev); extern const struct vb2_mem_ops vb2_dma_contig_memops; -- cgit v1.2.3 From 59ce4039727ef408769ab0e1263ece893abe22bb Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 24 May 2016 15:31:24 +0200 Subject: of: reserved_mem: add support for using more than one region for given device This patch allows device drivers to initialize more than one reserved memory region assigned to given device. When driver needs to use more than one reserved memory region, it should allocate child devices and initialize regions by index for each of its child devices. Signed-off-by: Marek Szyprowski Acked-by: Rob Herring Signed-off-by: Sylwester Nawrocki --- include/linux/of_reserved_mem.h | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h index ad2f67054372..1779cda99ef7 100644 --- a/include/linux/of_reserved_mem.h +++ b/include/linux/of_reserved_mem.h @@ -1,7 +1,8 @@ #ifndef __OF_RESERVED_MEM_H #define __OF_RESERVED_MEM_H -struct device; +#include + struct of_phandle_args; struct reserved_mem_ops; @@ -28,14 +29,17 @@ typedef int (*reservedmem_of_init_fn)(struct reserved_mem *rmem); _OF_DECLARE(reservedmem, name, compat, init, reservedmem_of_init_fn) #ifdef CONFIG_OF_RESERVED_MEM -int of_reserved_mem_device_init(struct device *dev); + +int of_reserved_mem_device_init_by_idx(struct device *dev, + struct device_node *np, int idx); void of_reserved_mem_device_release(struct device *dev); void fdt_init_reserved_mem(void); void fdt_reserved_mem_save_node(unsigned long node, const char *uname, phys_addr_t base, phys_addr_t size); #else -static inline int of_reserved_mem_device_init(struct device *dev) +static inline int of_reserved_mem_device_init_by_idx(struct device *dev, + struct device_node *np, int idx) { return -ENOSYS; } @@ -46,4 +50,19 @@ static inline void fdt_reserved_mem_save_node(unsigned long node, const char *uname, phys_addr_t base, phys_addr_t size) { } #endif +/** + * of_reserved_mem_device_init() - assign reserved memory region to given device + * @dev: Pointer to the device to configure + * + * This function assigns respective DMA-mapping operations based on the first + * reserved memory region specified by 'memory-region' property in device tree + * node of the given device. + * + * Returns error code or zero on success. + */ +static inline int of_reserved_mem_device_init(struct device *dev) +{ + return of_reserved_mem_device_init_by_idx(dev, dev->of_node, 0); +} + #endif /* __OF_RESERVED_MEM_H */ -- cgit v1.2.3 From c270e89bf2e0745da85a41178d312ef288ac5211 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 30 May 2016 13:39:56 +0300 Subject: ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h The omap_display_init() is implemented in the mach-omap2/display.c so the declaration should have been there as well. Change the board files to include display.h to avoid build breakage at the same time. Signed-off-by: Peter Ujfalusi Acked-by: Tony Lindgren --- include/video/omapdss.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 8e14ad7327c9..0c7ae93ebd76 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -330,9 +330,6 @@ struct omap_dss_board_info { enum omapdss_version version; }; -/* Init with the board info */ -extern int omap_display_init(struct omap_dss_board_info *board_data); - struct omap_video_timings { /* Unit: pixels */ u16 x_res; -- cgit v1.2.3 From 60fc4bab9181be55d24f68aa196d864850d8297e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 3 Jun 2016 12:40:27 +0300 Subject: video/platform_data: omapdss: Create new header file for platform data Create a new header file for platform data used by omapdss. Signed-off-by: Peter Ujfalusi --- include/linux/platform_data/omapdss.h | 42 +++++++++++++++++++++++++++++++++++ include/video/omapdss.h | 28 +---------------------- 2 files changed, 43 insertions(+), 27 deletions(-) create mode 100644 include/linux/platform_data/omapdss.h (limited to 'include') diff --git a/include/linux/platform_data/omapdss.h b/include/linux/platform_data/omapdss.h new file mode 100644 index 000000000000..dbb875abc44a --- /dev/null +++ b/include/linux/platform_data/omapdss.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2016 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAPDSS_PDATA_H +#define __OMAPDSS_PDATA_H + +enum omapdss_version { + OMAPDSS_VER_UNKNOWN = 0, + OMAPDSS_VER_OMAP24xx, + OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */ + OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */ + OMAPDSS_VER_OMAP3630, + OMAPDSS_VER_AM35xx, + OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */ + OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */ + OMAPDSS_VER_OMAP4, /* All other OMAP4s */ + OMAPDSS_VER_OMAP5, + OMAPDSS_VER_AM43xx, + OMAPDSS_VER_DRA7xx, +}; + +struct omap_dss_device; + +/* Board specific data */ +struct omap_dss_board_info { + int num_devices; + struct omap_dss_device **devices; + struct omap_dss_device *default_device; + const char *default_display_name; + int (*dsi_enable_pads)(int dsi_id, unsigned int lane_mask); + void (*dsi_disable_pads)(int dsi_id, unsigned int lane_mask); + int (*set_min_bus_tput)(struct device *dev, unsigned long r); + enum omapdss_version version; +}; + +#endif /* __OMAPDSS_PDATA_H */ diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 0c7ae93ebd76..53ada70cf23c 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -22,6 +22,7 @@ #include #include #include +#include #include