From bf287a90ceedf86e3313ba0dcff606ac5399b39a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 8 Aug 2013 12:38:32 +0200 Subject: mmc: mmc_spi: Support CD/RO GPIOs Add support for passing CD/RO GPIO numbers directly to the mmc_spi driver instead of relying solely on board code callbacks to retrieve the CD/RO signals values. The driver will enable debouncing on the card detect GPIO if the cd_debounce field is set to a non-zero value. Signed-off-by: Laurent Pinchart Reviewed-by: H Hartley Sweeten Signed-off-by: Chris Ball --- include/linux/spi/mmc_spi.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include') diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h index 32be8dbdf191..87cdb35bedda 100644 --- a/include/linux/spi/mmc_spi.h +++ b/include/linux/spi/mmc_spi.h @@ -7,6 +7,11 @@ struct device; struct mmc_host; +#define MMC_SPI_USE_CD_GPIO (1 << 0) +#define MMC_SPI_USE_RO_GPIO (1 << 1) +#define MMC_SPI_CD_GPIO_ACTIVE_LOW (1 << 2) +#define MMC_SPI_RO_GPIO_ACTIVE_LOW (1 << 3) + /* Put this in platform_data of a device being used to manage an MMC/SD * card slot. (Modeled after PXA mmc glue; see that for usage examples.) * @@ -30,8 +35,19 @@ struct mmc_spi_platform_data { */ int (*get_cd)(struct device *); + /* + * Card Detect and Read Only GPIOs. To enable debouncing on the card + * detect GPIO, set the cd_debounce to the debounce time in + * microseconds. + */ + unsigned int flags; + unsigned int cd_gpio; + unsigned int cd_debounce; + unsigned int ro_gpio; + /* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */ unsigned long caps; + unsigned long caps2; /* how long to debounce card detect, in msecs */ u16 detect_delay; -- cgit v1.2.3