From 817cee767523769cbc5ac94e439cde0c21752cbc Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 19 May 2013 14:23:57 +0300 Subject: mac80211: track AP's beacon rate and give it to the driver Track the AP's beacon rate in the scan BSS data and in the interface configuration to let the drivers know which rate the AP is using. This information may be used by drivers, in our case to let the firmware optimise beacon RX. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a405a7a9775c..5b7a3dadadde 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -305,6 +305,7 @@ enum ieee80211_rssi_event { * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. + * @beacon_rate: associated AP's beacon TX rate * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not @@ -352,6 +353,7 @@ struct ieee80211_bss_conf { u32 sync_device_ts; u8 sync_dtim_count; u32 basic_rates; + struct ieee80211_rate *beacon_rate; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; s32 cqm_rssi_thold; -- cgit v1.2.3 From 2f301ab29e4656af824592363039d8f6bd5a9f68 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 16 May 2013 13:00:28 +0200 Subject: nl80211/cfg80211: add 5 and 10 MHz defines and wiphy flag Add defines for 5 and 10 MHz channel width and fix channel handling functions accordingly. Also check for and report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer [fix spelling in comment] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 4 ++++ 2 files changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 6a43c34ce96f..316f34bb8e6e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2342,6 +2342,7 @@ struct cfg80211_ops { * responds to probe-requests in hardware. * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX. * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call. + * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -2365,6 +2366,7 @@ enum wiphy_flags { WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19), WIPHY_FLAG_OFFCHAN_TX = BIT(20), WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), + WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ca6facf4df0c..861e5eba3953 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2758,6 +2758,8 @@ enum nl80211_channel_type { * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -2766,6 +2768,8 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_80, NL80211_CHAN_WIDTH_80P80, NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, }; /** -- cgit v1.2.3 From 30e747326378caec9ad13515bc9bde2e41b1fee3 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 16 May 2013 13:00:29 +0200 Subject: nl80211: add rate flags for 5/10 Mhz channels Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 316f34bb8e6e..e3a39fc9a296 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -188,6 +188,8 @@ struct ieee80211_channel { * when used with 802.11g (on the 2.4 GHz band); filled by the * core code when registering the wiphy. * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. + * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode + * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode */ enum ieee80211_rate_flags { IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, @@ -195,6 +197,8 @@ enum ieee80211_rate_flags { IEEE80211_RATE_MANDATORY_B = 1<<2, IEEE80211_RATE_MANDATORY_G = 1<<3, IEEE80211_RATE_ERP_G = 1<<4, + IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5, + IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6, }; /** @@ -432,6 +436,30 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, u32 prohibited_flags); +/** + * ieee80211_chandef_rate_flags - returns rate flags for a channel + * + * In some channel types, not all rates may be used - for example CCK + * rates may not be used in 5/10 MHz channels. + * + * @chandef: channel definition for the channel + * + * Returns: rate flags which apply for this channel + */ +static inline enum ieee80211_rate_flags +ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) +{ + switch (chandef->width) { + case NL80211_CHAN_WIDTH_5: + return IEEE80211_RATE_SUPPORTS_5MHZ; + case NL80211_CHAN_WIDTH_10: + return IEEE80211_RATE_SUPPORTS_10MHZ; + default: + break; + } + return 0; +} + /** * enum survey_info_flags - survey information flags * -- cgit v1.2.3 From 959867fa55d0cb55fb3d08656e5e62607167617f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 19 Jun 2013 13:05:42 +0200 Subject: cfg80211: require passing BSS struct back to cfg80211_assoc_timeout Doing so will allow us to hold the BSS (not just ref it) over the association process, thus ensuring that it doesn't time out and gets invisible to the user (e.g. in 'iw wlan0 link'.) This also fixes a leak in mac80211 where it doesn't always release the BSS struct properly in all cases where calling this function. This leak was reported by Ben Greear. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e3a39fc9a296..7b0730aeb892 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1459,7 +1459,8 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * This structure provides information needed to complete IEEE 802.11 * authentication. * - * @bss: The BSS to authenticate with. + * @bss: The BSS to authenticate with, the callee must obtain a reference + * to it if it needs to keep it. * @auth_type: Authentication type (algorithm) * @ie: Extra IEs to add to Authentication frame or %NULL * @ie_len: Length of ie buffer in octets @@ -1497,11 +1498,10 @@ enum cfg80211_assoc_req_flags { * * This structure provides information needed to complete IEEE 802.11 * (re)association. - * @bss: The BSS to associate with. If the call is successful the driver - * is given a reference that it must release, normally via a call to - * cfg80211_send_rx_assoc(), or, if association timed out, with a - * call to cfg80211_put_bss() (in addition to calling - * cfg80211_send_assoc_timeout()) + * @bss: The BSS to associate with. If the call is successful the driver is + * given a reference that it must give back to cfg80211_send_rx_assoc() + * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new + * association requests while already associating must be rejected. * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association @@ -3522,11 +3522,11 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, /** * cfg80211_assoc_timeout - notification of timed out association * @dev: network device - * @addr: The MAC address of the device with which the association timed out + * @bss: The BSS entry with which association timed out. * * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_assoc_timeout(struct net_device *dev, const u8 *addr); +void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss); /** * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame -- cgit v1.2.3 From 073d1cf35fe45d89f5a553c21eea18b504dd6937 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 29 Apr 2013 19:35:35 +0300 Subject: Bluetooth: Rename L2CAP_CID_LE_DATA to L2CAP_CID_ATT In future Core Specification versions the ATT CID will be just one of many possible CIDs that can be used for data transfer. Therefore, it makes sense to rename the define for the ATT CID to something less ambigous. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index fb94cf13c777..1a966afbbfa8 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -242,7 +242,7 @@ struct l2cap_conn_rsp { #define L2CAP_CID_SIGNALING 0x0001 #define L2CAP_CID_CONN_LESS 0x0002 #define L2CAP_CID_A2MP 0x0003 -#define L2CAP_CID_LE_DATA 0x0004 +#define L2CAP_CID_ATT 0x0004 #define L2CAP_CID_LE_SIGNALING 0x0005 #define L2CAP_CID_SMP 0x0006 #define L2CAP_CID_DYN_START 0x0040 -- cgit v1.2.3 From 1f9b9a5dc5bb8ee360db9d32b2090aac497ae82a Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 30 Apr 2013 15:29:27 -0300 Subject: Bluetooth: Make inquiry_cache_flush non-static In order to use HCI request framework in start_discovery, we'll need to call inquiry_cache_flush in mgmt.c. Therefore, this patch adds the hci_ prefix to inquiry_cache_flush and makes it non-static. Signed-off-by: Andre Guedes Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 7cb6d360d147..7c150e4d65b9 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -432,6 +432,7 @@ void hci_inquiry_cache_update_resolve(struct hci_dev *hdev, struct inquiry_entry *ie); bool hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data, bool name_known, bool *ssp); +void hci_inquiry_cache_flush(struct hci_dev *hdev); /* ----- HCI Connections ----- */ enum { -- cgit v1.2.3 From 41dc2bd6d13bfccc34d05586be2eb65876a5990a Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 30 Apr 2013 15:29:30 -0300 Subject: Bluetooth: Make mgmt_start_discovery_failed static mgmt_start_discovery_failed is now only used in mgmt.c so we can make it a local function. This patch also moves the mgmt_start_ discovery_failed definition up in mgmt.c to avoid forward declaration. Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 7c150e4d65b9..ff4e8a5c9ceb 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1170,7 +1170,6 @@ int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 ssp, u8 *eir, u16 eir_len); int mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, s8 rssi, u8 *name, u8 name_len); -int mgmt_start_discovery_failed(struct hci_dev *hdev, u8 status); int mgmt_stop_discovery_failed(struct hci_dev *hdev, u8 status); int mgmt_discovering(struct hci_dev *hdev, u8 discovering); int mgmt_interleaved_discovery(struct hci_dev *hdev); -- cgit v1.2.3 From 0d8cc935e01c0fd1312a10881f4c0f1c4b4d05ab Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 30 Apr 2013 15:29:31 -0300 Subject: Bluetooth: Move discovery macros to hci_core.h Some of discovery macros will be used in hci_core so we need to define them in common place such as hci_core.h. Thus, this patch moves discovery macros to hci_core.h and also adds the DISCOV_ prefix to them. Signed-off-by: Andre Guedes Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index ff4e8a5c9ceb..61939a0e6cec 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1115,6 +1115,16 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event); BIT(BDADDR_LE_PUBLIC) | \ BIT(BDADDR_LE_RANDOM)) +/* These LE scan and inquiry parameters were chosen according to LE General + * Discovery Procedure specification. + */ +#define DISCOV_LE_SCAN_WIN 0x12 +#define DISCOV_LE_SCAN_INT 0x12 +#define DISCOV_LE_TIMEOUT msecs_to_jiffies(10240) +#define DISCOV_INTERLEAVED_TIMEOUT msecs_to_jiffies(5120) +#define DISCOV_INTERLEAVED_INQUIRY_LEN 0x04 +#define DISCOV_BREDR_INQUIRY_LEN 0x08 + int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len); int mgmt_index_added(struct hci_dev *hdev); int mgmt_index_removed(struct hci_dev *hdev); -- cgit v1.2.3 From 4c87eaab01df271c81f6a68e3c28dbd44d348004 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 30 Apr 2013 15:29:32 -0300 Subject: Bluetooth: Use HCI request in interleaved discovery In order to have a better HCI error handling in interleaved discovery functionality, we should use the HCI request framework. This patch updates le_scan_disable_work function so it uses the HCI request framework instead of the hci_send_cmd helper. A complete callback is registered (le_scan_disable_work_complete function) so we are able to trigger the inquiry procedure (if we are running the interleaved discovery) or to stop the discovery procedure (if we are running LE-only discovery). This patch also removes the extra logic in hci_cc_le_set_scan_enable to trigger the inquiry procedure and the mgmt_interleaved_discovery function since they become useless. Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 61939a0e6cec..b3bdad24c2b9 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1182,7 +1182,6 @@ int mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, s8 rssi, u8 *name, u8 name_len); int mgmt_stop_discovery_failed(struct hci_dev *hdev, u8 status); int mgmt_discovering(struct hci_dev *hdev, u8 discovering); -int mgmt_interleaved_discovery(struct hci_dev *hdev); int mgmt_device_blocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); bool mgmt_valid_hdev(struct hci_dev *hdev); -- cgit v1.2.3 From 1183fdcad42495073045a2d9755e0a6ac2fa874e Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 30 Apr 2013 15:29:35 -0300 Subject: Bluetooth: Make mgmt_stop_discovery_failed static mgmt_stop_discovery_failed is now only used in mgmt.c so we can make it a local function. This patch also moves the mgmt_stop_ discovery_failed definition up in mgmt.c to avoid forward declaration. Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index b3bdad24c2b9..1b343ef37871 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1180,7 +1180,6 @@ int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 ssp, u8 *eir, u16 eir_len); int mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, s8 rssi, u8 *name, u8 name_len); -int mgmt_stop_discovery_failed(struct hci_dev *hdev, u8 status); int mgmt_discovering(struct hci_dev *hdev, u8 discovering); int mgmt_device_blocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); -- cgit v1.2.3 From 917eedc56c65ba96a3bab4c346d948e73dd872f1 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 30 Apr 2013 15:29:37 -0300 Subject: Bluetooth: Remove LE scan helpers This patch removes the LE scan helpers hci_le_scan and hci_cancel_ le_scan and all code related to it. We now use the HCI request framework in device discovery functionality and these helpers are no longer needed. Signed-off-by: Andre Guedes Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 1b343ef37871..5de7eb95ef63 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -117,13 +117,6 @@ struct oob_data { u8 randomizer[16]; }; -struct le_scan_params { - u8 type; - u16 interval; - u16 window; - int timeout; -}; - #define HCI_MAX_SHORT_NAME_LENGTH 10 struct amp_assoc { @@ -283,9 +276,6 @@ struct hci_dev { struct delayed_work le_scan_disable; - struct work_struct le_scan; - struct le_scan_params le_scan_params; - __s8 adv_tx_power; __u8 adv_data[HCI_MAX_AD_LENGTH]; __u8 adv_data_len; @@ -1222,9 +1212,6 @@ void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8], __u8 ltk[16]); int hci_do_inquiry(struct hci_dev *hdev, u8 length); int hci_cancel_inquiry(struct hci_dev *hdev); -int hci_le_scan(struct hci_dev *hdev, u8 type, u16 interval, u16 window, - int timeout); -int hci_cancel_le_scan(struct hci_dev *hdev); u8 bdaddr_to_le(u8 bdaddr_type); -- cgit v1.2.3 From b0434345f2a7330be5277b63606cff26a7965982 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 30 Apr 2013 15:29:38 -0300 Subject: Bluetooth: Remove inquiry helpers This patch removes hci_do_inquiry and hci_cancel_inquiry helpers. We now use the HCI request framework in device discovery functionality and these helpers are no longer needed. Signed-off-by: Andre Guedes Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 5de7eb95ef63..f77885ea78c2 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1210,8 +1210,6 @@ void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency, u16 to_multiplier); void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8], __u8 ltk[16]); -int hci_do_inquiry(struct hci_dev *hdev, u8 length); -int hci_cancel_inquiry(struct hci_dev *hdev); u8 bdaddr_to_le(u8 bdaddr_type); -- cgit v1.2.3 From 0a804654af62dfea4899c66561d74d72273b2921 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 14 May 2013 11:44:17 +0300 Subject: Bluetooth: Remove unneeded flag Remove HCI_LINK_KEYS flag since using HCI_MGMT is enough for test that user space expects the kernel managing link keys. Signed-off-by: Andrei Emeltchenko Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index e0512aaef4b8..3c592cf473da 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -107,7 +107,6 @@ enum { HCI_MGMT, HCI_PAIRABLE, HCI_SERVICE_CACHE, - HCI_LINK_KEYS, HCI_DEBUG_KEYS, HCI_UNREGISTER, -- cgit v1.2.3 From 88f9b65d444794bb607f71644362ba0642585206 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 26 Jun 2013 10:02:11 +0200 Subject: bcma: add support for BCM43142 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + include/linux/bcma/bcma_driver_chipcommon.h | 55 +++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) (limited to 'include') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 2e34db82a643..622fc505d3e1 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -144,6 +144,7 @@ struct bcma_host_ops { /* Chip IDs of PCIe devices */ #define BCMA_CHIP_ID_BCM4313 0x4313 +#define BCMA_CHIP_ID_BCM43142 43142 #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index b8b09eac60a4..c49e1a159e6e 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -330,6 +330,8 @@ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ +#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100 +#define BCMA_CC_PMU_STAT_WDRESET 0x00000080 #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ @@ -355,6 +357,11 @@ #define BCMA_CC_REGCTL_DATA 0x065C #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ +#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ +#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF +#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000 +#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ /* NAND flash MLC controller registers (corerev >= 38) */ #define BCMA_CC_NAND_REVISION 0x0C00 @@ -435,6 +442,23 @@ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 +/* PMU rev 15 */ +#define BCMA_CC_PMU15_PLL_PLLCTL0 0 +#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003 +#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0 +#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC +#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2 +#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000 +#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22 +#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000 +#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24 +#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000 +#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27 +#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000 +#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30 +#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000 +#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31 + /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 /* HT clock for systems with PMU-enabled chipcommon */ @@ -507,6 +531,37 @@ #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) +#define BCMA_RES_4314_LPLDO_PU BIT(0) +#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1) +#define BCMA_RES_4314_PMU_BG_PU BIT(2) +#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3) +#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4) +#define BCMA_RES_4314_CLDO_PU BIT(5) +#define BCMA_RES_4314_LPLDO2_LVM BIT(6) +#define BCMA_RES_4314_WL_PMU_PU BIT(7) +#define BCMA_RES_4314_LNLDO_PU BIT(8) +#define BCMA_RES_4314_LDO3P3_PU BIT(9) +#define BCMA_RES_4314_OTP_PU BIT(10) +#define BCMA_RES_4314_XTAL_PU BIT(11) +#define BCMA_RES_4314_WL_PWRSW_PU BIT(12) +#define BCMA_RES_4314_LQ_AVAIL BIT(13) +#define BCMA_RES_4314_LOGIC_RET BIT(14) +#define BCMA_RES_4314_MEM_SLEEP BIT(15) +#define BCMA_RES_4314_MACPHY_RET BIT(16) +#define BCMA_RES_4314_WL_CORE_READY BIT(17) +#define BCMA_RES_4314_ILP_REQ BIT(18) +#define BCMA_RES_4314_ALP_AVAIL BIT(19) +#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20) +#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21) +#define BCMA_RES_4314_RX_PWRSW_PU BIT(22) +#define BCMA_RES_4314_RADIO_PU BIT(23) +#define BCMA_RES_4314_VCO_LDO_PU BIT(24) +#define BCMA_RES_4314_AFE_LDO_PU BIT(25) +#define BCMA_RES_4314_RX_LDO_PU BIT(26) +#define BCMA_RES_4314_TX_LDO_PU BIT(27) +#define BCMA_RES_4314_HT_AVAIL BIT(28) +#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29) + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -- cgit v1.2.3 From 3b81a6809480f3fc7d9d06562704c8df18ecec00 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 26 Jun 2013 14:20:18 +0200 Subject: brcmfmac: add broken scatter-gather DMA support DMA engine of some old SDIO host controllers require block size alignment for data length of each scatterlist item. This patch introduces an intermediate buffer list to support this kind of platform. It decreases the throughput because of an extra memcpy in critical data path. So don't turn this on unless it's necessary. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- include/linux/platform_data/brcmfmac-sdio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h index 1ade657d5fc1..b7174998c24a 100644 --- a/include/linux/platform_data/brcmfmac-sdio.h +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -90,6 +90,10 @@ void __init brcmfmac_init_pdata(void) * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are * used for registering the irq using request_irq function. * + * broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher align requirement + * than 32 bytes for each scatterlist item. + * * power_on: This function is called by the brcmfmac when the module gets * loaded. This can be particularly useful for low power devices. The platform * spcific routine may for example decide to power up the complete device. @@ -116,6 +120,7 @@ struct brcmfmac_sdio_platform_data { bool oob_irq_supported; unsigned int oob_irq_nr; unsigned long oob_irq_flags; + bool broken_sg_support; void (*power_on)(void); void (*power_off)(void); void (*reset)(void); -- cgit v1.2.3