From deb4de8b31bc5bf21efb6ac31150a01a631cd647 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 2 Aug 2017 15:00:40 -0700 Subject: seccomp: Provide matching filter for introspection Both the upcoming logging improvements and changes to RET_KILL will need to know which filter a given seccomp return value originated from. In order to delay logic processing of result until after the seccomp loop, this adds a single pointer assignment on matches. This will allow both log and RET_KILL logic to work off the filter rather than doing more expensive tests inside the time-critical run_filters loop. Running tight cycles of getpid() with filters attached shows no measurable difference in speed. Suggested-by: Tyler Hicks Signed-off-by: Kees Cook Reviewed-by: Tyler Hicks --- kernel/seccomp.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 98b59b5db90b..1f3347fc2605 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -171,10 +171,14 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen) /** * seccomp_run_filters - evaluates all seccomp filters against @sd * @sd: optional seccomp data to be passed to filters + * @match: stores struct seccomp_filter that resulted in the return value, + * unless filter returned SECCOMP_RET_ALLOW, in which case it will + * be unchanged. * * Returns valid seccomp BPF response codes. */ -static u32 seccomp_run_filters(const struct seccomp_data *sd) +static u32 seccomp_run_filters(const struct seccomp_data *sd, + struct seccomp_filter **match) { struct seccomp_data sd_local; u32 ret = SECCOMP_RET_ALLOW; @@ -198,8 +202,10 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd) for (; f; f = f->prev) { u32 cur_ret = BPF_PROG_RUN(f->prog, sd); - if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) + if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) { ret = cur_ret; + *match = f; + } } return ret; } @@ -566,6 +572,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, const bool recheck_after_trace) { u32 filter_ret, action; + struct seccomp_filter *match = NULL; int data; /* @@ -574,7 +581,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, */ rmb(); - filter_ret = seccomp_run_filters(sd); + filter_ret = seccomp_run_filters(sd, &match); data = filter_ret & SECCOMP_RET_DATA; action = filter_ret & SECCOMP_RET_ACTION; @@ -638,6 +645,11 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, return 0; case SECCOMP_RET_ALLOW: + /* + * Note that the "match" filter will always be NULL for + * this action since SECCOMP_RET_ALLOW is the starting + * state in seccomp_run_filters(). + */ return 0; case SECCOMP_RET_KILL: -- cgit v1.2.3 From 8e5f1ad116df6b0de65eac458d5e7c318d1c05af Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:52 +0000 Subject: seccomp: Sysctl to display available actions This patch creates a read-only sysctl containing an ordered list of seccomp actions that the kernel supports. The ordering, from left to right, is the lowest action value (kill) to the highest action value (allow). Currently, a read of the sysctl file would return "kill trap errno trace allow". The contents of this sysctl file can be useful for userspace code as well as the system administrator. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_avail libseccomp and other userspace code can easily determine which actions the current kernel supports. The set of actions supported by the current kernel may be different than the set of action macros found in kernel headers that were installed where the userspace code was built. In addition, this sysctl will allow system administrators to know which actions are supported by the kernel and make it easier to configure exactly what seccomp logs through the audit subsystem. Support for this level of logging configuration will come in a future patch. Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- kernel/seccomp.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 1f3347fc2605..5f19f41e4e50 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -17,11 +17,13 @@ #include #include #include +#include #include #include #include #include #include +#include #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER #include @@ -934,3 +936,52 @@ out: return ret; } #endif + +#ifdef CONFIG_SYSCTL + +/* Human readable action names for friendly sysctl interaction */ +#define SECCOMP_RET_KILL_NAME "kill" +#define SECCOMP_RET_TRAP_NAME "trap" +#define SECCOMP_RET_ERRNO_NAME "errno" +#define SECCOMP_RET_TRACE_NAME "trace" +#define SECCOMP_RET_ALLOW_NAME "allow" + +static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " + SECCOMP_RET_TRAP_NAME " " + SECCOMP_RET_ERRNO_NAME " " + SECCOMP_RET_TRACE_NAME " " + SECCOMP_RET_ALLOW_NAME; + +static struct ctl_path seccomp_sysctl_path[] = { + { .procname = "kernel", }, + { .procname = "seccomp", }, + { } +}; + +static struct ctl_table seccomp_sysctl_table[] = { + { + .procname = "actions_avail", + .data = (void *) &seccomp_actions_avail, + .maxlen = sizeof(seccomp_actions_avail), + .mode = 0444, + .proc_handler = proc_dostring, + }, + { } +}; + +static int __init seccomp_sysctl_init(void) +{ + struct ctl_table_header *hdr; + + hdr = register_sysctl_paths(seccomp_sysctl_path, seccomp_sysctl_table); + if (!hdr) + pr_warn("seccomp: sysctl registration failed\n"); + else + kmemleak_not_leak(hdr); + + return 0; +} + +device_initcall(seccomp_sysctl_init) + +#endif /* CONFIG_SYSCTL */ -- cgit v1.2.3 From d612b1fd8010d0d67b5287fe146b8b55bcbb8655 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:53 +0000 Subject: seccomp: Operation for checking if an action is available Userspace code that needs to check if the kernel supports a given action may not be able to use the /proc/sys/kernel/seccomp/actions_avail sysctl. The process may be running in a sandbox and, therefore, sufficient filesystem access may not be available. This patch adds an operation to the seccomp(2) syscall that allows userspace code to ask the kernel if a given action is available. If the action is supported by the kernel, 0 is returned. If the action is not supported by the kernel, -1 is returned with errno set to -EOPNOTSUPP. If this check is attempted on a kernel that doesn't support this new operation, -1 is returned with errno set to -EINVAL meaning that userspace code will have the ability to differentiate between the two error cases. Signed-off-by: Tyler Hicks Suggested-by: Andy Lutomirski Signed-off-by: Kees Cook --- kernel/seccomp.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 5f19f41e4e50..7a6089f66fed 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -808,6 +808,27 @@ static inline long seccomp_set_mode_filter(unsigned int flags, } #endif +static long seccomp_get_action_avail(const char __user *uaction) +{ + u32 action; + + if (copy_from_user(&action, uaction, sizeof(action))) + return -EFAULT; + + switch (action) { + case SECCOMP_RET_KILL: + case SECCOMP_RET_TRAP: + case SECCOMP_RET_ERRNO: + case SECCOMP_RET_TRACE: + case SECCOMP_RET_ALLOW: + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + /* Common entry point for both prctl and syscall. */ static long do_seccomp(unsigned int op, unsigned int flags, const char __user *uargs) @@ -819,6 +840,11 @@ static long do_seccomp(unsigned int op, unsigned int flags, return seccomp_set_mode_strict(); case SECCOMP_SET_MODE_FILTER: return seccomp_set_mode_filter(flags, uargs); + case SECCOMP_GET_ACTION_AVAIL: + if (flags != 0) + return -EINVAL; + + return seccomp_get_action_avail(uargs); default: return -EINVAL; } -- cgit v1.2.3 From 0ddec0fc8900201c0897b87b762b7c420436662f Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:54 +0000 Subject: seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- kernel/seccomp.c | 171 ++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 168 insertions(+), 3 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 7a6089f66fed..54357e361aea 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -522,6 +522,45 @@ static void seccomp_send_sigsys(int syscall, int reason) } #endif /* CONFIG_SECCOMP_FILTER */ +/* For use with seccomp_actions_logged */ +#define SECCOMP_LOG_KILL (1 << 0) +#define SECCOMP_LOG_TRAP (1 << 2) +#define SECCOMP_LOG_ERRNO (1 << 3) +#define SECCOMP_LOG_TRACE (1 << 4) +#define SECCOMP_LOG_ALLOW (1 << 5) + +static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | + SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE; + +static inline void seccomp_log(unsigned long syscall, long signr, u32 action) +{ + bool log = false; + + switch (action) { + case SECCOMP_RET_ALLOW: + case SECCOMP_RET_TRAP: + case SECCOMP_RET_ERRNO: + case SECCOMP_RET_TRACE: + break; + case SECCOMP_RET_KILL: + default: + log = seccomp_actions_logged & SECCOMP_LOG_KILL; + } + + /* + * Force an audit message to be emitted when the action is RET_KILL and + * the action is allowed to be logged by the admin. + */ + if (log) + return __audit_seccomp(syscall, signr, action); + + /* + * Let the audit subsystem decide if the action should be audited based + * on whether the current task itself is being audited. + */ + return audit_seccomp(syscall, signr, action); +} + /* * Secure computing mode 1 allows only read/write/exit/sigreturn. * To be fully secure this must be combined with rlimit @@ -547,7 +586,7 @@ static void __secure_computing_strict(int this_syscall) #ifdef SECCOMP_DEBUG dump_stack(); #endif - audit_seccomp(this_syscall, SIGKILL, SECCOMP_RET_KILL); + seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL); do_exit(SIGKILL); } @@ -656,7 +695,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, case SECCOMP_RET_KILL: default: - audit_seccomp(this_syscall, SIGSYS, action); + seccomp_log(this_syscall, SIGSYS, action); /* Dump core only if this is the last remaining thread. */ if (get_nr_threads(current) == 1) { siginfo_t info; @@ -673,7 +712,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, unreachable(); skip: - audit_seccomp(this_syscall, 0, action); + seccomp_log(this_syscall, 0, action); return -1; } #else @@ -978,6 +1017,127 @@ static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " SECCOMP_RET_TRACE_NAME " " SECCOMP_RET_ALLOW_NAME; +struct seccomp_log_name { + u32 log; + const char *name; +}; + +static const struct seccomp_log_name seccomp_log_names[] = { + { SECCOMP_LOG_KILL, SECCOMP_RET_KILL_NAME }, + { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, + { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, + { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME }, + { SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME }, + { } +}; + +static bool seccomp_names_from_actions_logged(char *names, size_t size, + u32 actions_logged) +{ + const struct seccomp_log_name *cur; + bool append_space = false; + + for (cur = seccomp_log_names; cur->name && size; cur++) { + ssize_t ret; + + if (!(actions_logged & cur->log)) + continue; + + if (append_space) { + ret = strscpy(names, " ", size); + if (ret < 0) + return false; + + names += ret; + size -= ret; + } else + append_space = true; + + ret = strscpy(names, cur->name, size); + if (ret < 0) + return false; + + names += ret; + size -= ret; + } + + return true; +} + +static bool seccomp_action_logged_from_name(u32 *action_logged, + const char *name) +{ + const struct seccomp_log_name *cur; + + for (cur = seccomp_log_names; cur->name; cur++) { + if (!strcmp(cur->name, name)) { + *action_logged = cur->log; + return true; + } + } + + return false; +} + +static bool seccomp_actions_logged_from_names(u32 *actions_logged, char *names) +{ + char *name; + + *actions_logged = 0; + while ((name = strsep(&names, " ")) && *name) { + u32 action_logged = 0; + + if (!seccomp_action_logged_from_name(&action_logged, name)) + return false; + + *actions_logged |= action_logged; + } + + return true; +} + +static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + char names[sizeof(seccomp_actions_avail)]; + struct ctl_table table; + int ret; + + if (write && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + memset(names, 0, sizeof(names)); + + if (!write) { + if (!seccomp_names_from_actions_logged(names, sizeof(names), + seccomp_actions_logged)) + return -EINVAL; + } + + table = *ro_table; + table.data = names; + table.maxlen = sizeof(names); + ret = proc_dostring(&table, write, buffer, lenp, ppos); + if (ret) + return ret; + + if (write) { + u32 actions_logged; + + if (!seccomp_actions_logged_from_names(&actions_logged, + table.data)) + return -EINVAL; + + if (actions_logged & SECCOMP_LOG_ALLOW) + return -EINVAL; + + seccomp_actions_logged = actions_logged; + } + + return 0; +} + static struct ctl_path seccomp_sysctl_path[] = { { .procname = "kernel", }, { .procname = "seccomp", }, @@ -992,6 +1152,11 @@ static struct ctl_table seccomp_sysctl_table[] = { .mode = 0444, .proc_handler = proc_dostring, }, + { + .procname = "actions_logged", + .mode = 0644, + .proc_handler = seccomp_actions_logged_handler, + }, { } }; -- cgit v1.2.3 From e66a39977985b1e69e17c4042cb290768eca9b02 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:56 +0000 Subject: seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- kernel/seccomp.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 54357e361aea..ed9fde418fc4 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -44,6 +44,7 @@ * get/put helpers should be used when accessing an instance * outside of a lifetime-guarded section. In general, this * is only needed for handling filters shared across tasks. + * @log: true if all actions except for SECCOMP_RET_ALLOW should be logged * @prev: points to a previously installed, or inherited, filter * @prog: the BPF program to evaluate * @@ -59,6 +60,7 @@ */ struct seccomp_filter { refcount_t usage; + bool log; struct seccomp_filter *prev; struct bpf_prog *prog; }; @@ -452,6 +454,10 @@ static long seccomp_attach_filter(unsigned int flags, return ret; } + /* Set log flag, if present. */ + if (flags & SECCOMP_FILTER_FLAG_LOG) + filter->log = true; + /* * If there is an existing filter, make it the prev and don't drop its * task reference. @@ -532,15 +538,22 @@ static void seccomp_send_sigsys(int syscall, int reason) static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE; -static inline void seccomp_log(unsigned long syscall, long signr, u32 action) +static inline void seccomp_log(unsigned long syscall, long signr, u32 action, + bool requested) { bool log = false; switch (action) { case SECCOMP_RET_ALLOW: + break; case SECCOMP_RET_TRAP: + log = requested && seccomp_actions_logged & SECCOMP_LOG_TRAP; + break; case SECCOMP_RET_ERRNO: + log = requested && seccomp_actions_logged & SECCOMP_LOG_ERRNO; + break; case SECCOMP_RET_TRACE: + log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE; break; case SECCOMP_RET_KILL: default: @@ -548,8 +561,9 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action) } /* - * Force an audit message to be emitted when the action is RET_KILL and - * the action is allowed to be logged by the admin. + * Force an audit message to be emitted when the action is RET_KILL or + * the FILTER_FLAG_LOG bit was set and the action is allowed to be + * logged by the admin. */ if (log) return __audit_seccomp(syscall, signr, action); @@ -586,7 +600,7 @@ static void __secure_computing_strict(int this_syscall) #ifdef SECCOMP_DEBUG dump_stack(); #endif - seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL); + seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL, true); do_exit(SIGKILL); } @@ -695,7 +709,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, case SECCOMP_RET_KILL: default: - seccomp_log(this_syscall, SIGSYS, action); + seccomp_log(this_syscall, SIGSYS, action, true); /* Dump core only if this is the last remaining thread. */ if (get_nr_threads(current) == 1) { siginfo_t info; @@ -712,7 +726,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, unreachable(); skip: - seccomp_log(this_syscall, 0, action); + seccomp_log(this_syscall, 0, action, match ? match->log : false); return -1; } #else -- cgit v1.2.3 From 59f5cf44a38284eb9e76270c786fb6cc62ef8ac4 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:57 +0000 Subject: seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- kernel/seccomp.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index ed9fde418fc4..59cde2ed3b92 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -533,10 +533,12 @@ static void seccomp_send_sigsys(int syscall, int reason) #define SECCOMP_LOG_TRAP (1 << 2) #define SECCOMP_LOG_ERRNO (1 << 3) #define SECCOMP_LOG_TRACE (1 << 4) -#define SECCOMP_LOG_ALLOW (1 << 5) +#define SECCOMP_LOG_LOG (1 << 5) +#define SECCOMP_LOG_ALLOW (1 << 6) static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | - SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE; + SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE | + SECCOMP_LOG_LOG; static inline void seccomp_log(unsigned long syscall, long signr, u32 action, bool requested) @@ -555,15 +557,18 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action, case SECCOMP_RET_TRACE: log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE; break; + case SECCOMP_RET_LOG: + log = seccomp_actions_logged & SECCOMP_LOG_LOG; + break; case SECCOMP_RET_KILL: default: log = seccomp_actions_logged & SECCOMP_LOG_KILL; } /* - * Force an audit message to be emitted when the action is RET_KILL or - * the FILTER_FLAG_LOG bit was set and the action is allowed to be - * logged by the admin. + * Force an audit message to be emitted when the action is RET_KILL, + * RET_LOG, or the FILTER_FLAG_LOG bit was set and the action is + * allowed to be logged by the admin. */ if (log) return __audit_seccomp(syscall, signr, action); @@ -699,6 +704,10 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, return 0; + case SECCOMP_RET_LOG: + seccomp_log(this_syscall, 0, action, true); + return 0; + case SECCOMP_RET_ALLOW: /* * Note that the "match" filter will always be NULL for @@ -873,6 +882,7 @@ static long seccomp_get_action_avail(const char __user *uaction) case SECCOMP_RET_TRAP: case SECCOMP_RET_ERRNO: case SECCOMP_RET_TRACE: + case SECCOMP_RET_LOG: case SECCOMP_RET_ALLOW: break; default: @@ -1023,12 +1033,14 @@ out: #define SECCOMP_RET_TRAP_NAME "trap" #define SECCOMP_RET_ERRNO_NAME "errno" #define SECCOMP_RET_TRACE_NAME "trace" +#define SECCOMP_RET_LOG_NAME "log" #define SECCOMP_RET_ALLOW_NAME "allow" static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " SECCOMP_RET_TRAP_NAME " " SECCOMP_RET_ERRNO_NAME " " SECCOMP_RET_TRACE_NAME " " + SECCOMP_RET_LOG_NAME " " SECCOMP_RET_ALLOW_NAME; struct seccomp_log_name { @@ -1041,6 +1053,7 @@ static const struct seccomp_log_name seccomp_log_names[] = { { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME }, + { SECCOMP_LOG_LOG, SECCOMP_RET_LOG_NAME }, { SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME }, { } }; -- cgit v1.2.3 From fd76875ca289a3d4722f266fd2d5532a27083903 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Aug 2017 12:53:18 -0700 Subject: seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD In preparation for adding SECCOMP_RET_KILL_PROCESS, rename SECCOMP_RET_KILL to the more accurate SECCOMP_RET_KILL_THREAD. The existing selftest values are intentionally left as SECCOMP_RET_KILL just to be sure we're exercising the alias. Signed-off-by: Kees Cook --- kernel/seccomp.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 59cde2ed3b92..95ac54cff00f 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -192,7 +192,7 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd, /* Ensure unexpected behavior doesn't result in failing open. */ if (unlikely(WARN_ON(f == NULL))) - return SECCOMP_RET_KILL; + return SECCOMP_RET_KILL_THREAD; if (!sd) { populate_seccomp_data(&sd_local); @@ -529,15 +529,17 @@ static void seccomp_send_sigsys(int syscall, int reason) #endif /* CONFIG_SECCOMP_FILTER */ /* For use with seccomp_actions_logged */ -#define SECCOMP_LOG_KILL (1 << 0) +#define SECCOMP_LOG_KILL_THREAD (1 << 0) #define SECCOMP_LOG_TRAP (1 << 2) #define SECCOMP_LOG_ERRNO (1 << 3) #define SECCOMP_LOG_TRACE (1 << 4) #define SECCOMP_LOG_LOG (1 << 5) #define SECCOMP_LOG_ALLOW (1 << 6) -static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | - SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE | +static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_THREAD | + SECCOMP_LOG_TRAP | + SECCOMP_LOG_ERRNO | + SECCOMP_LOG_TRACE | SECCOMP_LOG_LOG; static inline void seccomp_log(unsigned long syscall, long signr, u32 action, @@ -560,13 +562,13 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action, case SECCOMP_RET_LOG: log = seccomp_actions_logged & SECCOMP_LOG_LOG; break; - case SECCOMP_RET_KILL: + case SECCOMP_RET_KILL_THREAD: default: - log = seccomp_actions_logged & SECCOMP_LOG_KILL; + log = seccomp_actions_logged & SECCOMP_LOG_KILL_THREAD; } /* - * Force an audit message to be emitted when the action is RET_KILL, + * Force an audit message to be emitted when the action is RET_KILL_*, * RET_LOG, or the FILTER_FLAG_LOG bit was set and the action is * allowed to be logged by the admin. */ @@ -605,7 +607,7 @@ static void __secure_computing_strict(int this_syscall) #ifdef SECCOMP_DEBUG dump_stack(); #endif - seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL, true); + seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL_THREAD, true); do_exit(SIGKILL); } @@ -716,7 +718,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, */ return 0; - case SECCOMP_RET_KILL: + case SECCOMP_RET_KILL_THREAD: default: seccomp_log(this_syscall, SIGSYS, action, true); /* Dump core only if this is the last remaining thread. */ @@ -878,7 +880,7 @@ static long seccomp_get_action_avail(const char __user *uaction) return -EFAULT; switch (action) { - case SECCOMP_RET_KILL: + case SECCOMP_RET_KILL_THREAD: case SECCOMP_RET_TRAP: case SECCOMP_RET_ERRNO: case SECCOMP_RET_TRACE: @@ -1029,19 +1031,20 @@ out: #ifdef CONFIG_SYSCTL /* Human readable action names for friendly sysctl interaction */ -#define SECCOMP_RET_KILL_NAME "kill" +#define SECCOMP_RET_KILL_THREAD_NAME "kill_thread" #define SECCOMP_RET_TRAP_NAME "trap" #define SECCOMP_RET_ERRNO_NAME "errno" #define SECCOMP_RET_TRACE_NAME "trace" #define SECCOMP_RET_LOG_NAME "log" #define SECCOMP_RET_ALLOW_NAME "allow" -static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " - SECCOMP_RET_TRAP_NAME " " - SECCOMP_RET_ERRNO_NAME " " - SECCOMP_RET_TRACE_NAME " " - SECCOMP_RET_LOG_NAME " " - SECCOMP_RET_ALLOW_NAME; +static const char seccomp_actions_avail[] = + SECCOMP_RET_KILL_THREAD_NAME " " + SECCOMP_RET_TRAP_NAME " " + SECCOMP_RET_ERRNO_NAME " " + SECCOMP_RET_TRACE_NAME " " + SECCOMP_RET_LOG_NAME " " + SECCOMP_RET_ALLOW_NAME; struct seccomp_log_name { u32 log; @@ -1049,7 +1052,7 @@ struct seccomp_log_name { }; static const struct seccomp_log_name seccomp_log_names[] = { - { SECCOMP_LOG_KILL, SECCOMP_RET_KILL_NAME }, + { SECCOMP_LOG_KILL_THREAD, SECCOMP_RET_KILL_THREAD_NAME }, { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME }, -- cgit v1.2.3 From 4d3b0b05aae9ee9ce0970dc4cc0fb3fad5e85945 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Aug 2017 13:01:39 -0700 Subject: seccomp: Introduce SECCOMP_RET_KILL_PROCESS This introduces the BPF return value for SECCOMP_RET_KILL_PROCESS to kill an entire process. This cannot yet be reached by seccomp, but it changes the default-kill behavior (for unknown return values) from kill-thread to kill-process. Signed-off-by: Kees Cook --- kernel/seccomp.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 95ac54cff00f..5c7299b9d953 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -192,7 +192,7 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd, /* Ensure unexpected behavior doesn't result in failing open. */ if (unlikely(WARN_ON(f == NULL))) - return SECCOMP_RET_KILL_THREAD; + return SECCOMP_RET_KILL_PROCESS; if (!sd) { populate_seccomp_data(&sd_local); @@ -529,14 +529,16 @@ static void seccomp_send_sigsys(int syscall, int reason) #endif /* CONFIG_SECCOMP_FILTER */ /* For use with seccomp_actions_logged */ -#define SECCOMP_LOG_KILL_THREAD (1 << 0) +#define SECCOMP_LOG_KILL_PROCESS (1 << 0) +#define SECCOMP_LOG_KILL_THREAD (1 << 1) #define SECCOMP_LOG_TRAP (1 << 2) #define SECCOMP_LOG_ERRNO (1 << 3) #define SECCOMP_LOG_TRACE (1 << 4) #define SECCOMP_LOG_LOG (1 << 5) #define SECCOMP_LOG_ALLOW (1 << 6) -static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_THREAD | +static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_PROCESS | + SECCOMP_LOG_KILL_THREAD | SECCOMP_LOG_TRAP | SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE | @@ -563,8 +565,11 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action, log = seccomp_actions_logged & SECCOMP_LOG_LOG; break; case SECCOMP_RET_KILL_THREAD: - default: log = seccomp_actions_logged & SECCOMP_LOG_KILL_THREAD; + break; + case SECCOMP_RET_KILL_PROCESS: + default: + log = seccomp_actions_logged & SECCOMP_LOG_KILL_PROCESS; } /* @@ -719,10 +724,12 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, return 0; case SECCOMP_RET_KILL_THREAD: + case SECCOMP_RET_KILL_PROCESS: default: seccomp_log(this_syscall, SIGSYS, action, true); /* Dump core only if this is the last remaining thread. */ - if (get_nr_threads(current) == 1) { + if (action == SECCOMP_RET_KILL_PROCESS || + get_nr_threads(current) == 1) { siginfo_t info; /* Show the original registers in the dump. */ @@ -731,7 +738,10 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, seccomp_init_siginfo(&info, this_syscall, data); do_coredump(&info); } - do_exit(SIGSYS); + if (action == SECCOMP_RET_KILL_PROCESS) + do_group_exit(SIGSYS); + else + do_exit(SIGSYS); } unreachable(); -- cgit v1.2.3 From 0466bdb99e8744bc9befa8d62a317f0fd7fd7421 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Aug 2017 13:12:11 -0700 Subject: seccomp: Implement SECCOMP_RET_KILL_PROCESS action MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore Cc: Fabricio Voznika Signed-off-by: Kees Cook --- kernel/seccomp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 5c7299b9d953..c24579dfa7a1 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -181,6 +181,7 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen) * * Returns valid seccomp BPF response codes. */ +#define ACTION_ONLY(ret) ((s32)((ret) & (SECCOMP_RET_ACTION_FULL))) static u32 seccomp_run_filters(const struct seccomp_data *sd, struct seccomp_filter **match) { @@ -206,7 +207,7 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd, for (; f; f = f->prev) { u32 cur_ret = BPF_PROG_RUN(f->prog, sd); - if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) { + if (ACTION_ONLY(cur_ret) < ACTION_ONLY(ret)) { ret = cur_ret; *match = f; } @@ -650,7 +651,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, filter_ret = seccomp_run_filters(sd, &match); data = filter_ret & SECCOMP_RET_DATA; - action = filter_ret & SECCOMP_RET_ACTION; + action = filter_ret & SECCOMP_RET_ACTION_FULL; switch (action) { case SECCOMP_RET_ERRNO: @@ -890,6 +891,7 @@ static long seccomp_get_action_avail(const char __user *uaction) return -EFAULT; switch (action) { + case SECCOMP_RET_KILL_PROCESS: case SECCOMP_RET_KILL_THREAD: case SECCOMP_RET_TRAP: case SECCOMP_RET_ERRNO: @@ -1041,6 +1043,7 @@ out: #ifdef CONFIG_SYSCTL /* Human readable action names for friendly sysctl interaction */ +#define SECCOMP_RET_KILL_PROCESS_NAME "kill_process" #define SECCOMP_RET_KILL_THREAD_NAME "kill_thread" #define SECCOMP_RET_TRAP_NAME "trap" #define SECCOMP_RET_ERRNO_NAME "errno" @@ -1049,6 +1052,7 @@ out: #define SECCOMP_RET_ALLOW_NAME "allow" static const char seccomp_actions_avail[] = + SECCOMP_RET_KILL_PROCESS_NAME " " SECCOMP_RET_KILL_THREAD_NAME " " SECCOMP_RET_TRAP_NAME " " SECCOMP_RET_ERRNO_NAME " " @@ -1062,6 +1066,7 @@ struct seccomp_log_name { }; static const struct seccomp_log_name seccomp_log_names[] = { + { SECCOMP_LOG_KILL_PROCESS, SECCOMP_RET_KILL_PROCESS_NAME }, { SECCOMP_LOG_KILL_THREAD, SECCOMP_RET_KILL_THREAD_NAME }, { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, -- cgit v1.2.3 From 66a733ea6b611aecf0119514d2dddab5f9d6c01e Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 27 Sep 2017 09:25:30 -0600 Subject: seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter() As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end up using different filters. Once we drop ->siglock it is possible for task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC. Fixes: f8e529ed941b ("seccomp, ptrace: add support for dumping seccomp filters") Reported-by: Chris Salls Cc: stable@vger.kernel.org # needs s/refcount_/atomic_/ for v4.12 and earlier Signed-off-by: Oleg Nesterov [tycho: add __get_seccomp_filter vs. open coding refcount_inc()] Signed-off-by: Tycho Andersen [kees: tweak commit log] Signed-off-by: Kees Cook --- kernel/seccomp.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index c24579dfa7a1..bb3a38005b9c 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -473,14 +473,19 @@ static long seccomp_attach_filter(unsigned int flags, return 0; } +void __get_seccomp_filter(struct seccomp_filter *filter) +{ + /* Reference count is bounded by the number of total processes. */ + refcount_inc(&filter->usage); +} + /* get_seccomp_filter - increments the reference count of the filter on @tsk */ void get_seccomp_filter(struct task_struct *tsk) { struct seccomp_filter *orig = tsk->seccomp.filter; if (!orig) return; - /* Reference count is bounded by the number of total processes. */ - refcount_inc(&orig->usage); + __get_seccomp_filter(orig); } static inline void seccomp_filter_free(struct seccomp_filter *filter) @@ -491,10 +496,8 @@ static inline void seccomp_filter_free(struct seccomp_filter *filter) } } -/* put_seccomp_filter - decrements the ref count of tsk->seccomp.filter */ -void put_seccomp_filter(struct task_struct *tsk) +static void __put_seccomp_filter(struct seccomp_filter *orig) { - struct seccomp_filter *orig = tsk->seccomp.filter; /* Clean up single-reference branches iteratively. */ while (orig && refcount_dec_and_test(&orig->usage)) { struct seccomp_filter *freeme = orig; @@ -503,6 +506,12 @@ void put_seccomp_filter(struct task_struct *tsk) } } +/* put_seccomp_filter - decrements the ref count of tsk->seccomp.filter */ +void put_seccomp_filter(struct task_struct *tsk) +{ + __put_seccomp_filter(tsk->seccomp.filter); +} + static void seccomp_init_siginfo(siginfo_t *info, int syscall, int reason) { memset(info, 0, sizeof(*info)); @@ -1025,13 +1034,13 @@ long seccomp_get_filter(struct task_struct *task, unsigned long filter_off, if (!data) goto out; - get_seccomp_filter(task); + __get_seccomp_filter(filter); spin_unlock_irq(&task->sighand->siglock); if (copy_to_user(data, fprog->filter, bpf_classic_proglen(fprog))) ret = -EFAULT; - put_seccomp_filter(task); + __put_seccomp_filter(filter); return ret; out: -- cgit v1.2.3 From 084f5601c357e4ee59cf0712200d3f5c4710ba40 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 29 Sep 2017 14:26:48 +0100 Subject: seccomp: make function __get_seccomp_filter static The function __get_seccomp_filter is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol '__get_seccomp_filter' was not declared. Should it be static? Signed-off-by: Colin Ian King Fixes: 66a733ea6b61 ("seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook --- kernel/seccomp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index bb3a38005b9c..0ae832e13b97 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -473,7 +473,7 @@ static long seccomp_attach_filter(unsigned int flags, return 0; } -void __get_seccomp_filter(struct seccomp_filter *filter) +static void __get_seccomp_filter(struct seccomp_filter *filter) { /* Reference count is bounded by the number of total processes. */ refcount_inc(&filter->usage); -- cgit v1.2.3 From 506458efaf153c1ea480591c5602a5a3ba5a3b76 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 24 Oct 2017 11:22:48 +0100 Subject: locking/barriers: Convert users of lockless_dereference() to READ_ONCE() READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it can be used instead of lockless_dereference() without any change in semantics. Signed-off-by: Will Deacon Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar --- kernel/seccomp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 0ae832e13b97..8ac79355915b 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -189,7 +189,7 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd, u32 ret = SECCOMP_RET_ALLOW; /* Make sure cross-thread synced filter points somewhere sane. */ struct seccomp_filter *f = - lockless_dereference(current->seccomp.filter); + READ_ONCE(current->seccomp.filter); /* Ensure unexpected behavior doesn't result in failing open. */ if (unlikely(WARN_ON(f == NULL))) -- cgit v1.2.3 From b24413180f5600bcb3bb70fbed5cf186b60864bd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 1 Nov 2017 15:07:57 +0100 Subject: License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- kernel/seccomp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'kernel/seccomp.c') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 0ae832e13b97..418a1c045933 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * linux/kernel/seccomp.c * -- cgit v1.2.3