From 9036990d462e09366f7297a2d1da6582c3e6b1d3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 5 Nov 2008 16:05:44 -0500 Subject: ftrace: restructure tracing start/stop infrastructure Impact: change where tracing is started up and stopped Currently, when a new tracer is selected via echo'ing a tracer name into the current_tracer file, the startup is only done if tracing_enabled is set to one. If tracing_enabled is changed to zero (by echo'ing 0 into the tracing_enabled file) a full shutdown is performed. The full startup and shutdown of a tracer can be expensive and the user can lose out traces when echo'ing in 0 to the tracing_enabled file, because the process takes too long. There can also be places that the user would like to start and stop the tracer several times and doing the full startup and shutdown of a tracer might be too expensive. This patch performs the full startup and shutdown when a tracer is selected. It also adds a way to do a quick start or stop of a tracer. The quick version is just a flag that prevents the tracing from taking place, but the overhead of the code is still there. For example, the startup of a tracer may enable tracepoints, or enable the function tracer. The stop and start will just set a flag to have the tracer ignore the calls when the tracepoint or function trace is called. The overhead of the tracer may still be present when the tracer is stopped, but no tracing will occur. Setting the tracer to the 'nop' tracer (or any other tracer) will perform the shutdown of the tracer which will disable the tracepoint or disable the function tracer. The tracing_enabled file will simply start or stop tracing. This change is all internal. The end result for the user should be the same as before. If tracing_enabled is not set, no trace will happen. If tracing_enabled is set, then the trace will happen. The tracing_enabled variable is static between tracers. Enabling tracing_enabled and going to another tracer will keep tracing_enabled enabled. Same is true with disabling tracing_enabled. This patch will now provide a fast start/stop method to the users for enabling or disabling tracing. Note: There were two methods to the struct tracer that were never used: The methods start and stop. These were to be used as a hook to the reading of the trace output, but ended up not being necessary. These two methods are now used to enable the start and stop of each tracer, in case the tracer needs to do more than just not write into the buffer. For example, the irqsoff tracer must stop recording max latencies when tracing is stopped. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace_irqsoff.c | 41 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 36 insertions(+), 5 deletions(-) (limited to 'kernel/trace/trace_irqsoff.c') diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 9c74071c10e0..a87a20fa3fc6 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -353,15 +353,28 @@ void trace_preempt_off(unsigned long a0, unsigned long a1) } #endif /* CONFIG_PREEMPT_TRACER */ +/* + * save_tracer_enabled is used to save the state of the tracer_enabled + * variable when we disable it when we open a trace output file. + */ +static int save_tracer_enabled; + static void start_irqsoff_tracer(struct trace_array *tr) { register_ftrace_function(&trace_ops); - tracer_enabled = 1; + if (tracing_is_enabled()) { + tracer_enabled = 1; + save_tracer_enabled = 1; + } else { + tracer_enabled = 0; + save_tracer_enabled = 0; + } } static void stop_irqsoff_tracer(struct trace_array *tr) { tracer_enabled = 0; + save_tracer_enabled = 0; unregister_ftrace_function(&trace_ops); } @@ -389,17 +402,29 @@ static void irqsoff_tracer_ctrl_update(struct trace_array *tr) stop_irqsoff_tracer(tr); } +static void irqsoff_tracer_start(struct trace_array *tr) +{ + irqsoff_tracer_reset(tr); + tracer_enabled = 1; + save_tracer_enabled = 1; +} + +static void irqsoff_tracer_stop(struct trace_array *tr) +{ + tracer_enabled = 0; + save_tracer_enabled = 0; +} + static void irqsoff_tracer_open(struct trace_iterator *iter) { /* stop the trace while dumping */ - if (iter->tr->ctrl) - stop_irqsoff_tracer(iter->tr); + tracer_enabled = 0; } static void irqsoff_tracer_close(struct trace_iterator *iter) { - if (iter->tr->ctrl) - start_irqsoff_tracer(iter->tr); + /* restart tracing */ + tracer_enabled = save_tracer_enabled; } #ifdef CONFIG_IRQSOFF_TRACER @@ -414,6 +439,8 @@ static struct tracer irqsoff_tracer __read_mostly = .name = "irqsoff", .init = irqsoff_tracer_init, .reset = irqsoff_tracer_reset, + .start = irqsoff_tracer_start, + .stop = irqsoff_tracer_stop, .open = irqsoff_tracer_open, .close = irqsoff_tracer_close, .ctrl_update = irqsoff_tracer_ctrl_update, @@ -440,6 +467,8 @@ static struct tracer preemptoff_tracer __read_mostly = .name = "preemptoff", .init = preemptoff_tracer_init, .reset = irqsoff_tracer_reset, + .start = irqsoff_tracer_start, + .stop = irqsoff_tracer_stop, .open = irqsoff_tracer_open, .close = irqsoff_tracer_close, .ctrl_update = irqsoff_tracer_ctrl_update, @@ -468,6 +497,8 @@ static struct tracer preemptirqsoff_tracer __read_mostly = .name = "preemptirqsoff", .init = preemptirqsoff_tracer_init, .reset = irqsoff_tracer_reset, + .start = irqsoff_tracer_start, + .stop = irqsoff_tracer_stop, .open = irqsoff_tracer_open, .close = irqsoff_tracer_close, .ctrl_update = irqsoff_tracer_ctrl_update, -- cgit v1.2.3 From 451931702017951f74624ddc4f7f02e4641b0e20 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 7 Nov 2008 22:36:02 -0500 Subject: ftrace: irqsoff tracer incorrect reset Impact: fix to irqsoff tracer output In converting to the new start / stop ftrace handling, the irqsoff tracer start called the irqsoff reset function. irqsoff tracer is not the same as the other traces, and it resets the buffers while searching for the longest latency. The reset that the irqsoff stop method calls disables the function tracing. That means that, by starting the tracer, the function tracer is disabled incorrectly. This patch simply removes the call to reset which keeps the function tracing enabled. Reset is not needed for the irqsoff stop method. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace_irqsoff.c | 1 - 1 file changed, 1 deletion(-) (limited to 'kernel/trace/trace_irqsoff.c') diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index a87a20fa3fc6..3509086cdc4c 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -404,7 +404,6 @@ static void irqsoff_tracer_ctrl_update(struct trace_array *tr) static void irqsoff_tracer_start(struct trace_array *tr) { - irqsoff_tracer_reset(tr); tracer_enabled = 1; save_tracer_enabled = 1; } -- cgit v1.2.3 From bbf5b1a0cecb56de6236db8b01c5bfb7ab8ba8b2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 7 Nov 2008 22:36:02 -0500 Subject: ftrace: remove ctrl_update method Impact: Remove the ctrl_update tracer method With the new quick start/stop method of tracing, the ctrl_update method is out of date. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace_irqsoff.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'kernel/trace/trace_irqsoff.c') diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 3509086cdc4c..ffdf592a54e3 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -394,14 +394,6 @@ static void irqsoff_tracer_reset(struct trace_array *tr) stop_irqsoff_tracer(tr); } -static void irqsoff_tracer_ctrl_update(struct trace_array *tr) -{ - if (tr->ctrl) - start_irqsoff_tracer(tr); - else - stop_irqsoff_tracer(tr); -} - static void irqsoff_tracer_start(struct trace_array *tr) { tracer_enabled = 1; @@ -442,7 +434,6 @@ static struct tracer irqsoff_tracer __read_mostly = .stop = irqsoff_tracer_stop, .open = irqsoff_tracer_open, .close = irqsoff_tracer_close, - .ctrl_update = irqsoff_tracer_ctrl_update, .print_max = 1, #ifdef CONFIG_FTRACE_SELFTEST .selftest = trace_selftest_startup_irqsoff, @@ -470,7 +461,6 @@ static struct tracer preemptoff_tracer __read_mostly = .stop = irqsoff_tracer_stop, .open = irqsoff_tracer_open, .close = irqsoff_tracer_close, - .ctrl_update = irqsoff_tracer_ctrl_update, .print_max = 1, #ifdef CONFIG_FTRACE_SELFTEST .selftest = trace_selftest_startup_preemptoff, @@ -500,7 +490,6 @@ static struct tracer preemptirqsoff_tracer __read_mostly = .stop = irqsoff_tracer_stop, .open = irqsoff_tracer_open, .close = irqsoff_tracer_close, - .ctrl_update = irqsoff_tracer_ctrl_update, .print_max = 1, #ifdef CONFIG_FTRACE_SELFTEST .selftest = trace_selftest_startup_preemptirqsoff, -- cgit v1.2.3 From c76f06945be50564f925799ddfb6235ee4c26aa0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 7 Nov 2008 22:36:02 -0500 Subject: ftrace: remove trace array ctrl Impact: remove obsolete variable in trace_array structure With the new start / stop method of ftrace, the ctrl variable in the trace_array structure is now obsolete. Remove it. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace_irqsoff.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'kernel/trace/trace_irqsoff.c') diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index ffdf592a54e3..d919d4eaa7cc 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -383,15 +383,12 @@ static void __irqsoff_tracer_init(struct trace_array *tr) irqsoff_trace = tr; /* make sure that the tracer is visible */ smp_wmb(); - - if (tr->ctrl) - start_irqsoff_tracer(tr); + start_irqsoff_tracer(tr); } static void irqsoff_tracer_reset(struct trace_array *tr) { - if (tr->ctrl) - stop_irqsoff_tracer(tr); + stop_irqsoff_tracer(tr); } static void irqsoff_tracer_start(struct trace_array *tr) -- cgit v1.2.3 From 1c80025a49855b12fa09bb6db71820e3367b1369 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sun, 16 Nov 2008 05:57:26 +0100 Subject: tracing/ftrace: change the type of the init() callback Impact: extend the ->init() method with the ability to fail This bring a way to know if the initialization of a tracer successed. A tracer must return 0 on success and a traditional error (ie: -ENOMEM) if it fails. If a tracer fails to init, it is free to print a detailed warn. The tracing api will not and switch to a new tracer will just return the error from the init callback. Note: this will be used for the return tracer. Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar --- kernel/trace/trace_irqsoff.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'kernel/trace/trace_irqsoff.c') diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index d919d4eaa7cc..7c2e326bbc8b 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -416,11 +416,12 @@ static void irqsoff_tracer_close(struct trace_iterator *iter) } #ifdef CONFIG_IRQSOFF_TRACER -static void irqsoff_tracer_init(struct trace_array *tr) +static int irqsoff_tracer_init(struct trace_array *tr) { trace_type = TRACER_IRQS_OFF; __irqsoff_tracer_init(tr); + return 0; } static struct tracer irqsoff_tracer __read_mostly = { @@ -442,11 +443,12 @@ static struct tracer irqsoff_tracer __read_mostly = #endif #ifdef CONFIG_PREEMPT_TRACER -static void preemptoff_tracer_init(struct trace_array *tr) +static int preemptoff_tracer_init(struct trace_array *tr) { trace_type = TRACER_PREEMPT_OFF; __irqsoff_tracer_init(tr); + return 0; } static struct tracer preemptoff_tracer __read_mostly = @@ -471,11 +473,12 @@ static struct tracer preemptoff_tracer __read_mostly = #if defined(CONFIG_IRQSOFF_TRACER) && \ defined(CONFIG_PREEMPT_TRACER) -static void preemptirqsoff_tracer_init(struct trace_array *tr) +static int preemptirqsoff_tracer_init(struct trace_array *tr) { trace_type = TRACER_IRQS_OFF | TRACER_PREEMPT_OFF; __irqsoff_tracer_init(tr); + return 0; } static struct tracer preemptirqsoff_tracer __read_mostly = -- cgit v1.2.3