From fdb838cdae4d4f2a478e5cfdd84026f7960b69dd Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 7 Mar 2011 05:49:47 +0000 Subject: dsa/mv88e6060: support nonzero mii base address The mv88e6060 uses either the lower 16 or upper 16 mii addresses, depending on the value of the EE_CLK/ADDR4 pin. Support both configurations by using the sw_addr setting as base address. Signed-off-by: Peter Korsgaard Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/dsa/mv88e6060.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'net/dsa/mv88e6060.c') diff --git a/net/dsa/mv88e6060.c b/net/dsa/mv88e6060.c index 83277f463af7..8f4ff5a2c813 100644 --- a/net/dsa/mv88e6060.c +++ b/net/dsa/mv88e6060.c @@ -18,7 +18,7 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg) { - return mdiobus_read(ds->master_mii_bus, addr, reg); + return mdiobus_read(ds->master_mii_bus, ds->pd->sw_addr + addr, reg); } #define REG_READ(addr, reg) \ @@ -34,7 +34,8 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg) static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) { - return mdiobus_write(ds->master_mii_bus, addr, reg, val); + return mdiobus_write(ds->master_mii_bus, ds->pd->sw_addr + addr, + reg, val); } #define REG_WRITE(addr, reg, val) \ @@ -50,7 +51,7 @@ static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr) { int ret; - ret = mdiobus_read(bus, REG_PORT(0), 0x03); + ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03); if (ret >= 0) { ret &= 0xfff0; if (ret == 0x0600) -- cgit v1.2.3