From 10e9510a6d238a8e6c994b81748b00b9c696c48b Mon Sep 17 00:00:00 2001 From: Sami Tolvanen Date: Mon, 3 Feb 2025 21:26:32 +0000 Subject: gendwarfksyms: Add a separate pass to resolve FQNs Using dwarf_getscopes_die to resolve fully-qualified names turns out to be rather slow, and also results in duplicate scopes being processed, which doesn't help. Simply adding an extra pass to resolve names for all DIEs before processing exports is noticeably faster. For the object files with the most exports in a defconfig+Rust build, the performance improvement is consistently >50%: rust/bindings.o: 1038 exports before: 9.5980 +- 0.0183 seconds time elapsed ( +- 0.19% ) after: 4.3116 +- 0.0287 seconds time elapsed ( +- 0.67% ) rust/core.o: 424 exports before: 5.3584 +- 0.0204 seconds time elapsed ( +- 0.38% ) after: 0.05348 +- 0.00129 seconds time elapsed ( +- 2.42% ) ^ Not a mistake. net/core/dev.o: 190 exports before: 9.0507 +- 0.0297 seconds time elapsed ( +- 0.33% ) after: 3.2882 +- 0.0165 seconds time elapsed ( +- 0.50% ) rust/kernel.o: 129 exports before: 6.8571 +- 0.0317 seconds time elapsed ( +- 0.46% ) after: 2.9096 +- 0.0316 seconds time elapsed ( +- 1.09% ) net/core/skbuff.o: 120 exports before: 5.4805 +- 0.0291 seconds time elapsed ( +- 0.53% ) after: 2.0339 +- 0.0231 seconds time elapsed ( +- 1.14% ) drivers/gpu/drm/display/drm_dp_helper.o: 101 exports before: 1.7877 +- 0.0187 seconds time elapsed ( +- 1.05% ) after: 0.69245 +- 0.00994 seconds time elapsed ( +- 1.44% ) net/core/sock.o: 97 exports before: 5.8327 +- 0.0653 seconds time elapsed ( +- 1.12% ) after: 2.0784 +- 0.0291 seconds time elapsed ( +- 1.40% ) drivers/net/phy/phy_device.o: 95 exports before: 3.0671 +- 0.0371 seconds time elapsed ( +- 1.21% ) after: 1.2127 +- 0.0207 seconds time elapsed ( +- 1.70% ) drivers/pci/pci.o: 93 exports before: 1.1130 +- 0.0113 seconds time elapsed ( +- 1.01% ) after: 0.4848 +- 0.0127 seconds time elapsed ( +- 2.63% ) kernel/sched/core.o: 83 exports before: 3.5092 +- 0.0223 seconds time elapsed ( +- 0.64% ) after: 1.1231 +- 0.0145 seconds time elapsed ( +- 1.29% ) Overall, a defconfig+DWARF5 build with gendwarfksyms and Rust is 14.8% faster with this patch applied on my test system. Without Rust, there's still a 10.4% improvement in build time when gendwarfksyms is used. Note that symbol versions are unchanged with this patch. Suggested-by: Giuliano Procida Signed-off-by: Sami Tolvanen Signed-off-by: Masahiro Yamada --- scripts/gendwarfksyms/die.c | 2 +- scripts/gendwarfksyms/dwarf.c | 152 ++++++++++++++++++---------------- scripts/gendwarfksyms/gendwarfksyms.h | 2 + scripts/gendwarfksyms/types.c | 2 +- 4 files changed, 86 insertions(+), 72 deletions(-) (limited to 'scripts') diff --git a/scripts/gendwarfksyms/die.c b/scripts/gendwarfksyms/die.c index 66bd4c9bc952..6183bbbe7b54 100644 --- a/scripts/gendwarfksyms/die.c +++ b/scripts/gendwarfksyms/die.c @@ -6,7 +6,7 @@ #include #include "gendwarfksyms.h" -#define DIE_HASH_BITS 15 +#define DIE_HASH_BITS 16 /* {die->addr, state} -> struct die * */ static HASHTABLE_DEFINE(die_map, 1 << DIE_HASH_BITS); diff --git a/scripts/gendwarfksyms/dwarf.c b/scripts/gendwarfksyms/dwarf.c index 534d9aa7c114..eed247d8abfc 100644 --- a/scripts/gendwarfksyms/dwarf.c +++ b/scripts/gendwarfksyms/dwarf.c @@ -3,6 +3,7 @@ * Copyright (C) 2024 Google LLC */ +#define _GNU_SOURCE #include #include #include @@ -193,79 +194,17 @@ static void process_fmt(struct die *cache, const char *fmt, ...) va_end(args); } -#define MAX_FQN_SIZE 64 - -/* Get a fully qualified name from DWARF scopes */ -static char *get_fqn(Dwarf_Die *die) +static void update_fqn(struct die *cache, Dwarf_Die *die) { - const char *list[MAX_FQN_SIZE]; - Dwarf_Die *scopes = NULL; - bool has_name = false; - char *fqn = NULL; - char *p; - int count = 0; - int len = 0; - int res; - int i; - - res = checkp(dwarf_getscopes_die(die, &scopes)); - if (!res) { - list[count] = get_name_attr(die); - - if (!list[count]) - return NULL; - - len += strlen(list[count]); - count++; - - goto done; - } - - for (i = res - 1; i >= 0 && count < MAX_FQN_SIZE; i--) { - if (dwarf_tag(&scopes[i]) == DW_TAG_compile_unit) - continue; - - list[count] = get_name_attr(&scopes[i]); - - if (list[count]) { - has_name = true; - } else { - list[count] = ""; - has_name = false; - } + struct die *fqn; - len += strlen(list[count]); - count++; - - if (i > 0) { - list[count++] = "::"; - len += 2; - } + if (!cache->fqn) { + if (!__die_map_get((uintptr_t)die->addr, DIE_FQN, &fqn) && + *fqn->fqn) + cache->fqn = xstrdup(fqn->fqn); + else + cache->fqn = ""; } - - free(scopes); - - if (count == MAX_FQN_SIZE) - warn("increase MAX_FQN_SIZE: reached the maximum"); - - /* Consider the DIE unnamed if the last scope doesn't have a name */ - if (!has_name) - return NULL; -done: - fqn = xmalloc(len + 1); - *fqn = '\0'; - - p = fqn; - for (i = 0; i < count; i++) - p = stpcpy(p, list[i]); - - return fqn; -} - -static void update_fqn(struct die *cache, Dwarf_Die *die) -{ - if (!cache->fqn) - cache->fqn = get_fqn(die) ?: ""; } static void process_fqn(struct die *cache, Dwarf_Die *die) @@ -1148,8 +1087,81 @@ static void process_symbol_ptr(struct symbol *sym, void *arg) cache_free(&state.expansion_cache); } +static int resolve_fqns(struct state *parent, struct die *unused, + Dwarf_Die *die) +{ + struct state state; + struct die *cache; + const char *name; + bool use_prefix; + char *prefix = NULL; + char *fqn = ""; + int tag; + + if (!__die_map_get((uintptr_t)die->addr, DIE_FQN, &cache)) + return 0; + + tag = dwarf_tag(die); + + /* + * Only namespaces and structures need to pass a prefix to the next + * scope. + */ + use_prefix = tag == DW_TAG_namespace || tag == DW_TAG_class_type || + tag == DW_TAG_structure_type; + + state.expand.current_fqn = NULL; + name = get_name_attr(die); + + if (parent && parent->expand.current_fqn && (use_prefix || name)) { + /* + * The fqn for the current DIE, and if needed, a prefix for the + * next scope. + */ + if (asprintf(&prefix, "%s::%s", parent->expand.current_fqn, + name ? name : "") < 0) + error("asprintf failed"); + + if (use_prefix) + state.expand.current_fqn = prefix; + + /* + * Use fqn only if the DIE has a name. Otherwise fqn will + * remain empty. + */ + if (name) { + fqn = prefix; + /* prefix will be freed by die_map. */ + prefix = NULL; + } + } else if (name) { + /* No prefix from the previous scope. Use only the name. */ + fqn = xstrdup(name); + + if (use_prefix) + state.expand.current_fqn = fqn; + } + + /* If the DIE has a non-empty name, cache it. */ + if (*fqn) { + cache = die_map_get(die, DIE_FQN); + /* Move ownership of fqn to die_map. */ + cache->fqn = fqn; + cache->state = DIE_FQN; + } + + check(process_die_container(&state, NULL, die, resolve_fqns, + match_all)); + + free(prefix); + return 0; +} + void process_cu(Dwarf_Die *cudie) { + check(process_die_container(NULL, NULL, cudie, resolve_fqns, + match_all)); + check(process_die_container(NULL, NULL, cudie, process_exported_symbols, match_all)); diff --git a/scripts/gendwarfksyms/gendwarfksyms.h b/scripts/gendwarfksyms/gendwarfksyms.h index 197a1a8123c6..2feec168bf73 100644 --- a/scripts/gendwarfksyms/gendwarfksyms.h +++ b/scripts/gendwarfksyms/gendwarfksyms.h @@ -139,6 +139,7 @@ void symbol_free(void); enum die_state { DIE_INCOMPLETE, + DIE_FQN, DIE_UNEXPANDED, DIE_COMPLETE, DIE_SYMBOL, @@ -170,6 +171,7 @@ static inline const char *die_state_name(enum die_state state) { switch (state) { CASE_CONST_TO_STR(DIE_INCOMPLETE) + CASE_CONST_TO_STR(DIE_FQN) CASE_CONST_TO_STR(DIE_UNEXPANDED) CASE_CONST_TO_STR(DIE_COMPLETE) CASE_CONST_TO_STR(DIE_SYMBOL) diff --git a/scripts/gendwarfksyms/types.c b/scripts/gendwarfksyms/types.c index 6c03265f4d10..6f37289104ff 100644 --- a/scripts/gendwarfksyms/types.c +++ b/scripts/gendwarfksyms/types.c @@ -248,7 +248,7 @@ static char *get_type_name(struct die *cache) warn("found incomplete cache entry: %p", cache); return NULL; } - if (cache->state == DIE_SYMBOL) + if (cache->state == DIE_SYMBOL || cache->state == DIE_FQN) return NULL; if (!cache->fqn || !*cache->fqn) return NULL; -- cgit v1.2.3 From e966ad0edd0056c7491b8f23992c11734ab61ddf Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 6 Feb 2025 01:39:38 +0900 Subject: kbuild: remove EXTRA_*FLAGS support Commit f77bf01425b1 ("kbuild: introduce ccflags-y, asflags-y and ldflags-y") deprecated these in 2007. The migration should have been completed by now. Signed-off-by: Masahiro Yamada Reviewed-by: Kees Cook Reviewed-by: Nathan Chancellor --- scripts/Makefile.build | 4 ---- scripts/Makefile.lib | 5 ----- scripts/checkpatch.pl | 14 -------------- 3 files changed, 23 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 993708d11874..a59650ba140b 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -20,10 +20,6 @@ always-m := targets := subdir-y := subdir-m := -EXTRA_AFLAGS := -EXTRA_CFLAGS := -EXTRA_CPPFLAGS := -EXTRA_LDFLAGS := asflags-y := ccflags-y := rustflags-y := diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index cad20f0e66ee..47f56ef71937 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -1,9 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -# Backward compatibility -asflags-y += $(EXTRA_AFLAGS) -ccflags-y += $(EXTRA_CFLAGS) -cppflags-y += $(EXTRA_CPPFLAGS) -ldflags-y += $(EXTRA_LDFLAGS) # flags that take effect in current and sub directories KBUILD_AFLAGS += $(subdir-asflags-y) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 7b28ad331742..8f70bedc18be 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -3689,20 +3689,6 @@ sub process { } } - if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) && - ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) { - my $flag = $1; - my $replacement = { - 'EXTRA_AFLAGS' => 'asflags-y', - 'EXTRA_CFLAGS' => 'ccflags-y', - 'EXTRA_CPPFLAGS' => 'cppflags-y', - 'EXTRA_LDFLAGS' => 'ldflags-y', - }; - - WARN("DEPRECATED_VARIABLE", - "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag}); - } - # check for DT compatible documentation if (defined $root && (($realfile =~ /\.dtsi?$/ && $line =~ /^\+\s*compatible\s*=\s*\"/) || -- cgit v1.2.3 From 90efe2b9119ff8a83a67eb5323e52311a1a49de9 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 6 Feb 2025 02:18:02 +0900 Subject: gen_compile_commands.py: remove code for '\#' replacement Since commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make"), '#' in the build command is replaced with $(pound) rather than '\#'. Calling .replace(r'\#', '#') is only necessary when this tool is used to parse .*.cmd files generated by Linux 4.16 or earlier, which is unlikely to happen. Signed-off-by: Masahiro Yamada Reviewed-by: Nathan Chancellor --- scripts/clang-tools/gen_compile_commands.py | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/clang-tools/gen_compile_commands.py b/scripts/clang-tools/gen_compile_commands.py index e4fb686dfaa9..96e6e46ad1a7 100755 --- a/scripts/clang-tools/gen_compile_commands.py +++ b/scripts/clang-tools/gen_compile_commands.py @@ -167,10 +167,10 @@ def process_line(root_directory, command_prefix, file_path): root_directory or file_directory. """ # The .cmd files are intended to be included directly by Make, so they - # escape the pound sign '#', either as '\#' or '$(pound)' (depending on the - # kernel version). The compile_commands.json file is not interepreted - # by Make, so this code replaces the escaped version with '#'. - prefix = command_prefix.replace(r'\#', '#').replace('$(pound)', '#') + # escape the pound sign '#' as '$(pound)'. The compile_commands.json file + # is not interepreted by Make, so this code replaces the escaped version + # with '#'. + prefix = command_prefix.replace('$(pound)', '#') # Return the canonical path, eliminating any symbolic links encountered in the path. abs_path = os.path.realpath(os.path.join(root_directory, file_path)) -- cgit v1.2.3 From 6c3fb0bb4d4f1173f32cc26d077b151d72226a2f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 6 Feb 2025 02:45:28 +0900 Subject: genksyms: factor out APP for the ST_NORMAL state For the ST_NORMAL state, APP is called regardless of the token type. Factor it out. Signed-off-by: Masahiro Yamada --- scripts/genksyms/lex.l | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'scripts') diff --git a/scripts/genksyms/lex.l b/scripts/genksyms/lex.l index 22aeb57649d9..f81033af1528 100644 --- a/scripts/genksyms/lex.l +++ b/scripts/genksyms/lex.l @@ -176,10 +176,10 @@ repeat: switch (lexstate) { case ST_NORMAL: + APP; switch (token) { case IDENT: - APP; { int r = is_reserved_word(yytext, yyleng); if (r >= 0) @@ -224,13 +224,11 @@ repeat: break; case '[': - APP; lexstate = ST_BRACKET; count = 1; goto repeat; case '{': - APP; if (dont_want_brace_phrase) break; lexstate = ST_BRACE; @@ -238,12 +236,10 @@ repeat: goto repeat; case '=': case ':': - APP; lexstate = ST_EXPRESSION; break; default: - APP; break; } break; -- cgit v1.2.3 From 226ac19c217f24f0927d0a73cf9ee613971a188d Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 8 Feb 2025 03:41:55 +0900 Subject: kconfig: do not clear SYMBOL_VALID when reading include/config/auto.conf When conf_read_simple() is called with S_DEF_AUTO, it is meant to read previous symbol values from include/config/auto.conf to determine which include/config/* files should be touched. This process should not modify the current symbol status in any way. However, conf_touch_deps() currently invalidates all symbol values and recalculates them, which is totally unneeded. Signed-off-by: Masahiro Yamada --- scripts/kconfig/confdata.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 3b55e7a4131d..ac95661a1c9d 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -385,7 +385,7 @@ load: def_flags = SYMBOL_DEF << def; for_all_symbols(sym) { - sym->flags &= ~(def_flags|SYMBOL_VALID); + sym->flags &= ~def_flags; switch (sym->type) { case S_INT: case S_HEX: @@ -398,7 +398,11 @@ load: } } - expr_invalidate_all(); + if (def == S_DEF_USER) { + for_all_symbols(sym) + sym->flags &= ~SYMBOL_VALID; + expr_invalidate_all(); + } while (getline_stripped(&line, &line_asize, in) != -1) { struct menu *choice; @@ -464,6 +468,9 @@ load: if (conf_set_sym_val(sym, def, def_flags, val)) continue; + if (def != S_DEF_USER) + continue; + /* * If this is a choice member, give it the highest priority. * If conflicting CONFIG options are given from an input file, @@ -967,10 +974,8 @@ static int conf_touch_deps(void) depfile_path[depfile_prefix_len] = 0; conf_read_simple(name, S_DEF_AUTO); - sym_calc_value(modules_sym); for_all_symbols(sym) { - sym_calc_value(sym); if (sym_is_choice(sym)) continue; if (sym->flags & SYMBOL_WRITE) { @@ -1084,12 +1089,12 @@ int conf_write_autoconf(int overwrite) if (ret) return -1; - if (conf_touch_deps()) - return 1; - for_all_symbols(sym) sym_calc_value(sym); + if (conf_touch_deps()) + return 1; + ret = __conf_write_autoconf(conf_get_autoheader_name(), print_symbol_for_c, &comment_style_c); -- cgit v1.2.3 From ab5bc764bdc270d1c55aaf9d238e0986ff301355 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 8 Feb 2025 03:42:48 +0900 Subject: kconfig: remove unnecessary cast in sym_get_string() The explicit casting from (char *) to (const char *) is unneeded. Signed-off-by: Masahiro Yamada --- scripts/kconfig/symbol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index 7beb59dec5a0..d57f8cbba291 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -879,7 +879,7 @@ const char *sym_get_string_value(struct symbol *sym) default: ; } - return (const char *)sym->curr.val; + return sym->curr.val; } bool sym_is_changeable(const struct symbol *sym) -- cgit v1.2.3 From 59d60d26a58be75e9e3b813104c2dfd3b58eb662 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 8 Feb 2025 02:50:13 +0900 Subject: modpost: introduce get_basename() helper The logic to retrieve the basename appears multiple times. Factor out the common pattern into a helper function. I copied kbasename() from include/linux/string.h and renamed it to get_basename(). Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier --- scripts/mod/modpost.c | 41 ++++++++++++++++++----------------------- scripts/mod/modpost.h | 1 + scripts/mod/sumversion.c | 13 ++++--------- 3 files changed, 23 insertions(+), 32 deletions(-) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index c35d22607978..7f4c72eca72c 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -98,6 +98,18 @@ static inline bool strends(const char *str, const char *postfix) return strcmp(str + strlen(str) - strlen(postfix), postfix) == 0; } +/** + * get_basename - return the last part of a pathname. + * + * @path: path to extract the filename from. + */ +const char *get_basename(const char *path) +{ + const char *tail = strrchr(path, '/'); + + return tail ? tail + 1 : path; +} + char *read_text_file(const char *filename) { struct stat st; @@ -1461,14 +1473,8 @@ static void extract_crcs_for_object(const char *object, struct module *mod) const char *base; int dirlen, ret; - base = strrchr(object, '/'); - if (base) { - base++; - dirlen = base - object; - } else { - dirlen = 0; - base = object; - } + base = get_basename(object); + dirlen = base - object; ret = snprintf(cmd_file, sizeof(cmd_file), "%.*s.%s.cmd", dirlen, object, base); @@ -1703,11 +1709,7 @@ static void check_exports(struct module *mod) s->crc_valid = exp->crc_valid; s->crc = exp->crc; - basename = strrchr(mod->name, '/'); - if (basename) - basename++; - else - basename = mod->name; + basename = get_basename(mod->name); if (!contains_namespace(&mod->imported_namespaces, exp->namespace)) { modpost_log(!allow_missing_ns_imports, @@ -1765,11 +1767,8 @@ static void check_modname_len(struct module *mod) { const char *mod_name; - mod_name = strrchr(mod->name, '/'); - if (mod_name == NULL) - mod_name = mod->name; - else - mod_name++; + mod_name = get_basename(mod->name); + if (strlen(mod_name) >= MODULE_NAME_LEN) error("module name is too long [%s.ko]\n", mod->name); } @@ -1946,11 +1945,7 @@ static void add_depends(struct buffer *b, struct module *mod) continue; s->module->seen = true; - p = strrchr(s->module->name, '/'); - if (p) - p++; - else - p = s->module->name; + p = get_basename(s->module->name); buf_printf(b, "%s%s", first ? "" : ",", p); first = 0; } diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h index 59366f456b76..9133e4c3803f 100644 --- a/scripts/mod/modpost.h +++ b/scripts/mod/modpost.h @@ -216,6 +216,7 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen); /* from modpost.c */ extern bool target_is_big_endian; extern bool host_is_big_endian; +const char *get_basename(const char *path); char *read_text_file(const char *filename); char *get_line(char **stringp); void *sym_get_data(const struct elf_info *info, const Elf_Sym *sym); diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c index 6de9af17599d..e79fc40d852f 100644 --- a/scripts/mod/sumversion.c +++ b/scripts/mod/sumversion.c @@ -309,15 +309,10 @@ static int parse_source_files(const char *objfile, struct md4_ctx *md) cmd = xmalloc(strlen(objfile) + sizeof("..cmd")); - base = strrchr(objfile, '/'); - if (base) { - base++; - dirlen = base - objfile; - sprintf(cmd, "%.*s.%s.cmd", dirlen, objfile, base); - } else { - dirlen = 0; - sprintf(cmd, ".%s.cmd", objfile); - } + base = get_basename(objfile); + dirlen = base - objfile; + sprintf(cmd, "%.*s.%s.cmd", dirlen, objfile, base); + dir = xmalloc(dirlen + 1); strncpy(dir, objfile, dirlen); dir[dirlen] = '\0'; -- cgit v1.2.3 From 144fced6852ba11c90560c996e986b4563f089af Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 8 Feb 2025 02:50:55 +0900 Subject: modpost: use strstarts() to clean up parse_source_files() No functional changes are intended. Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier --- scripts/mod/sumversion.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c index e79fc40d852f..3dd28b4d0099 100644 --- a/scripts/mod/sumversion.c +++ b/scripts/mod/sumversion.c @@ -330,7 +330,7 @@ static int parse_source_files(const char *objfile, struct md4_ctx *md) line++; p = line; - if (strncmp(line, "source_", sizeof("source_")-1) == 0) { + if (strstarts(line, "source_")) { p = strrchr(line, ' '); if (!p) { warn("malformed line: %s\n", line); @@ -344,7 +344,7 @@ static int parse_source_files(const char *objfile, struct md4_ctx *md) } continue; } - if (strncmp(line, "deps_", sizeof("deps_")-1) == 0) { + if (strstarts(line, "deps_")) { check_files = 1; continue; } -- cgit v1.2.3 From ac954145e1ee3f72033161cbe4ac0b16b5354ae7 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Mon, 10 Feb 2025 17:42:45 +0100 Subject: kbuild: rust: add rustc-min-version support function Introduce `rustc-min-version` support function that mimics `{gcc,clang}-min-version` ones, following commit 88b61e3bff93 ("Makefile.compiler: replace cc-ifversion with compiler-specific macros"). In addition, use it in the first use case we have in the kernel (which was done independently to minimize the changes needed for the fix). Signed-off-by: Miguel Ojeda Reviewed-by: Fiona Behrens Reviewed-by: Nicolas Schier Signed-off-by: Masahiro Yamada --- scripts/Makefile.compiler | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'scripts') diff --git a/scripts/Makefile.compiler b/scripts/Makefile.compiler index 8c1029687e2e..8956587b8547 100644 --- a/scripts/Makefile.compiler +++ b/scripts/Makefile.compiler @@ -67,6 +67,10 @@ gcc-min-version = $(call test-ge, $(CONFIG_GCC_VERSION), $1) # Usage: cflags-$(call clang-min-version, 110000) += -foo clang-min-version = $(call test-ge, $(CONFIG_CLANG_VERSION), $1) +# rustc-min-version +# Usage: rustc-$(call rustc-min-version, 108500) += -Cfoo +rustc-min-version = $(call test-ge, $(CONFIG_RUSTC_VERSION), $1) + # ld-option # Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y) ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3)) -- cgit v1.2.3 From 9d702bb1d3c03bb78d4fd2b3424169e3ef4cd402 Mon Sep 17 00:00:00 2001 From: Uday Shankar Date: Mon, 10 Feb 2025 18:11:54 -0700 Subject: scripts: make python shebangs specific about desired version The RPM packaging tools like to make sure that all packaged python scripts have version-unambiguous shebangs. Be more specific about the desired python version in a couple of places to avoid having to disable these checks in make rpm-pkg. Signed-off-by: Uday Shankar Signed-off-by: Masahiro Yamada --- scripts/show_delta | 2 +- scripts/tracing/draw_functrace.py | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/show_delta b/scripts/show_delta index 291ad65e3089..3755b6c6e557 100755 --- a/scripts/show_delta +++ b/scripts/show_delta @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0-only # # show_deltas: Read list of printk messages instrumented with diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py index 42fa87300941..97594b65f8ce 100755 --- a/scripts/tracing/draw_functrace.py +++ b/scripts/tracing/draw_functrace.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0-only """ -- cgit v1.2.3 From c15253494fd98cd76250c9faaebbc8b45f7d0072 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 16 Feb 2025 01:15:52 +0900 Subject: kbuild: move -fzero-init-padding-bits=all to the top-level Makefile The -fzero-init-padding-bits=all option is not a warning flag, so defining it in scripts/Makefile.extrawarn is inconsistent. Move it to the top-level Makefile for consistency. Signed-off-by: Masahiro Yamada Reviewed-by: Nathan Chancellor Reviewed-by: Kees Cook --- scripts/Makefile.extrawarn | 3 --- 1 file changed, 3 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index dc081cf46d21..d75897559d18 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -82,9 +82,6 @@ KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init) # Warn if there is an enum types mismatch KBUILD_CFLAGS += $(call cc-option,-Wenum-conversion) -# Explicitly clear padding bits during variable initialization -KBUILD_CFLAGS += $(call cc-option,-fzero-init-padding-bits=all) - KBUILD_CFLAGS += -Wextra KBUILD_CFLAGS += -Wunused -- cgit v1.2.3 From 1195306ee359ced2cb9d7a192e973872571cb93a Mon Sep 17 00:00:00 2001 From: WangYuli Date: Tue, 25 Feb 2025 02:26:19 +0800 Subject: kbuild: deb-pkg: add debarch for ARCH=loongarch64 Fix follow warning when 'make ARCH=loongarch64 bindeb-pkg': ** ** ** WARNING ** ** ** Your architecture doesn't have its equivalent Debian userspace architecture defined! Falling back to the current host architecture (loong64). Please add support for loongarch64 to ./scripts/package/mkdebian ... Reported-by: Shiwei Liu Signed-off-by: WangYuli Reviewed-by: Nathan Chancellor Signed-off-by: Masahiro Yamada --- scripts/package/mkdebian | 2 ++ 1 file changed, 2 insertions(+) (limited to 'scripts') diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian index b6dd98ca860b..0178000197fe 100755 --- a/scripts/package/mkdebian +++ b/scripts/package/mkdebian @@ -77,6 +77,8 @@ set_debarch() { debarch=i386 fi ;; + loongarch64) + debarch=loong64 ;; esac if [ -z "$debarch" ]; then debarch=$(dpkg-architecture -qDEB_HOST_ARCH) -- cgit v1.2.3 From 82c09de2d4c472ab1b973e6e033671020691e637 Mon Sep 17 00:00:00 2001 From: Xi Ruoyao Date: Wed, 26 Feb 2025 21:30:14 +0800 Subject: kbuild: add dependency from vmlinux to sorttable Without this dependency it's really puzzling when we bisect for a "bad" commit in a series of sorttable change: when "git bisect" switches to another commit, "make" just does nothing to vmlinux. Signed-off-by: Xi Ruoyao Acked-by: Steven Rostedt (Google) Signed-off-by: Masahiro Yamada --- scripts/Makefile.vmlinux | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'scripts') diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux index 873caaa55313..fb79fd6b2465 100644 --- a/scripts/Makefile.vmlinux +++ b/scripts/Makefile.vmlinux @@ -79,6 +79,10 @@ ifdef CONFIG_DEBUG_INFO_BTF vmlinux: $(RESOLVE_BTFIDS) endif +ifdef CONFIG_BUILDTIME_TABLE_SORT +vmlinux: scripts/sorttable +endif + # module.builtin.ranges # --------------------------------------------------------------------------- ifdef CONFIG_BUILTIN_MODULE_RANGES -- cgit v1.2.3 From f757f6011c92b5a01db742c39149bed9e526478f Mon Sep 17 00:00:00 2001 From: Seyediman Seyedarab Date: Sat, 1 Mar 2025 17:21:37 -0500 Subject: kbuild: fix argument parsing in scripts/config The script previously assumed --file was always the first argument, which caused issues when it appeared later. This patch updates the parsing logic to scan all arguments to find --file, sets the config file correctly, and resets the argument list with the remaining commands. It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN to make oldconfig. Signed-off-by: Seyediman Seyedarab Signed-off-by: Masahiro Yamada --- scripts/config | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'scripts') diff --git a/scripts/config b/scripts/config index ff88e2faefd3..ea475c07de28 100755 --- a/scripts/config +++ b/scripts/config @@ -32,6 +32,7 @@ commands: Disable option directly after other option --module-after|-M beforeopt option Turn option into module directly after other option + --refresh Refresh the config using old settings commands can be repeated multiple times @@ -124,16 +125,22 @@ undef_var() { txt_delete "^# $name is not set" "$FN" } -if [ "$1" = "--file" ]; then - FN="$2" - if [ "$FN" = "" ] ; then - usage +FN=.config +CMDS=() +while [[ $# -gt 0 ]]; do + if [ "$1" = "--file" ]; then + if [ "$2" = "" ]; then + usage + fi + FN="$2" + shift 2 + else + CMDS+=("$1") + shift fi - shift 2 -else - FN=.config -fi +done +set -- "${CMDS[@]}" if [ "$1" = "" ] ; then usage fi @@ -217,9 +224,8 @@ while [ "$1" != "" ] ; do set_var "${CONFIG_}$B" "${CONFIG_}$B=m" "${CONFIG_}$A" ;; - # undocumented because it ignores --file (fixme) --refresh) - yes "" | make oldconfig + yes "" | make oldconfig KCONFIG_CONFIG=$FN ;; *) -- cgit v1.2.3 From eb47ee018173f144f10eb38a3f7bd9f17ec6329e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 7 Mar 2025 00:56:22 +0900 Subject: kbuild: add Kbuild bash completion Kernel build commands can sometimes be long, particularly when cross-compiling, making them tedious to type and prone to mistypes. This commit introduces bash completion support for common variables and targets in Kbuild. For installation instructions, please refer to the documentation in Documentation/kbuild/bash-completion.rst. The following examples demonstrate how this saves typing. [Example 1] a long command line for cross-compiling $ make A -> completes 'A' to 'ARCH=' $ make ARCH= -> displays all supported architectures $ make ARCH=arm64 CR -> completes 'CR' to 'CROSS_COMPILE=' $ make ARCH=arm64 CROSS_COMPILE= -> displays installed toolchains $ make ARCH=arm64 CROSS_COMPILE=aa -> completes 'CROSS_COMPILE=aa' to 'CROSS_COMPILE=aarch64-linux-gnu-' $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- def -> completes 'def' to 'defconfig' [Example 2] a single build target $ make f -> completes 'f' to 'fs/' $ make fs/ -> displays objects and sub-directories in fs/ $ make fs/xf -> completes 'fs/xf' to 'fs/xfs/' $ make fs/xfs/l -> completes 'fs/xfs/l' to 'fs/xfs/libxfs/xfs_' $ make fs/xfs/libxfs/xfs_g -> completes 'fs/xfs/libxfs/xfs_g' to 'fs/xfs/libxfs/xfs_group.o' This does not aim to provide a complete list of variables and targets, as there are too many. However, it covers variables and targets used in common scenarios, and I hope this is useful enough. Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier Tested-by: Nicolas Schier --- scripts/bash-completion/make | 451 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 451 insertions(+) create mode 100644 scripts/bash-completion/make (limited to 'scripts') diff --git a/scripts/bash-completion/make b/scripts/bash-completion/make new file mode 100644 index 000000000000..42e8dcead25a --- /dev/null +++ b/scripts/bash-completion/make @@ -0,0 +1,451 @@ +# SPDX-License-Identifier: GPL-2.0-only +# bash completion for GNU make with kbuild extension -*- shell-script -*- + +# Load the default completion script for make. It is typically located at +# /usr/share/bash-completion/completions/make, but we do not rely on it. +__kbuild_load_default_make_completion() +{ + local -a dirs=("${BASH_COMPLETION_USER_DIR:-${XDG_DATA_HOME:-$HOME/.local/share}/bash-completion}/completions") + local ifs=$IFS IFS=: dir compfile this_dir + + for dir in ${XDG_DATA_DIRS:-/usr/local/share:/usr/share}; do + dirs+=("$dir"/bash-completion/completions) + done + IFS=$ifs + + this_dir="$(realpath "$(dirname "${BASH_SOURCE[0]}")")" + + for dir in "${dirs[@]}"; do + if [[ ! -d ${dir} || ${dir} = "${this_dir}" ]]; then + continue + fi + + for compfile in make make.bash _make; do + compfile=$dir/$compfile + # Avoid trying to source dirs; https://bugzilla.redhat.com/903540 + if [[ -f ${compfile} ]] && . "${compfile}" &>/dev/null; then + + __kbuild_default_make_completion=$( + # shellcheck disable=SC2046 # word splitting is the point here + set -- $(complete -p make) + + while [[ $# -gt 1 && "$1" != -F ]]; do + shift + done + + if [[ "$1" = -F ]]; then + echo "$2" + fi + ) + + return + fi + done + done +} + +__kbuild_load_default_make_completion + +__kbuild_handle_variable() +{ + local var=${1%%=*} + local cur=${cur#"${var}"=} + local srctree=$2 + local keywords=() + + case $var in + ARCH) + # sub-directories under arch/ + keywords+=($(find "${srctree}/arch" -mindepth 1 -maxdepth 1 -type d -printf '%P\n')) + # architectures hard-coded in the top Makefile + keywords+=(i386 x86_64 sparc32 sparc64 parisc64) + ;; + CROSS_COMPILE) + # toolchains with a full path + local cross_compile=() + local c c2 + _filedir + + for c in "${COMPREPLY[@]}"; do + # eval for tilde expansion + # suppress error, as this fails when it contains a space + eval "c2=${c}" 2>/dev/null || continue + if [[ ${c} == *-elfedit && ! -d ${c2} && -x ${c2} ]]; then + cross_compile+=("${c%elfedit}") + fi + done + + # toolchains in the PATH environment + while read -r c; do + if [[ ${c} == *-elfedit ]]; then + keywords+=("${c%elfedit}") + fi + done < <(compgen -c) + + COMPREPLY=() + _filedir -d + + # Add cross_compile directly without passing it to compgen. + # Otherwise, toolchain paths with a tilde do not work. + # e.g.) + # CROSS_COMPILE=~/0day/gcc-14.2.0-nolibc/aarch64-linux/bin/aarch64-linux- + COMPREPLY+=("${cross_compile[@]}") + ;; + LLVM) + # LLVM=1 uses the default 'clang' etc. + keywords+=(1) + + # suffix for a particular version. LLVM=-18 uses 'clang-18' etc. + while read -r c; do + if [[ ${c} == clang-[0-9]* ]]; then + keywords+=("${c#clang}") + fi + done < <(compgen -c) + + # directory path to LLVM toolchains + _filedir -d + ;; + KCONFIG_ALLCONFIG) + # KCONFIG_ALLCONFIG=1 selects the default fragment + keywords+=(1) + # or the path to a fragment file + _filedir + ;; + C | KBUILD_CHECKSRC) + keywords+=(1 2) + ;; + V | KBUILD_VERBOSE) + keywords+=({,1}{,2}) + ;; + W | KBUILD_EXTRA_WARN) + keywords+=({,1}{,2}{,3}{,c}{,e}) + ;; + KBUILD_ABS_SRCTREE | KBUILD_MODPOST_NOFINAL | KBUILD_MODPOST_WARN | \ + CLIPPY | KBUILD_CLIPPY | KCONFIG_NOSILENTUPDATE | \ + KCONFIG_OVERWRITECONFIG | KCONFIG_WARN_UNKNOWN_SYMBOL | \ + KCONFIG_WERROR ) + keywords+=(1) + ;; + INSTALL_MOD_STRIP) + keywords+=(1 --strip-debug --strip-unneeded) + ;; + O | KBUILD_OUTPUT | M | KBUILD_EXTMOD | MO | KBUILD_EXTMOD_OUTPUT | *_PATH) + # variables that take a directory. + _filedir -d + return + ;; + KBUILD_EXTRA_SYMBOL | KBUILD_KCONFIG | KCONFIG_CONFIG) + # variables that take a file. + _filedir + return + esac + + COMPREPLY+=($(compgen -W "${keywords[*]}" -- "${cur}")) +} + +# Check the -C, -f options and 'source' symlink. Return the source tree we are +# working in. +__kbuild_get_srctree() +{ + local words=("$@") + local cwd makef_dir + + # see if a path was specified with -C/--directory + for ((i = 1; i < ${#words[@]}; i++)); do + if [[ ${words[i]} == -@(C|-directory) ]]; then + # eval for tilde expansion. + # suppress error, as this fails when it contains a space + eval "cwd=${words[i + 1]}" 2>/dev/null + break + fi + done + + if [[ -z ${cwd} ]]; then + cwd=. + fi + + # see if a Makefile was specified with -f/--file/--makefile + for ((i = 1; i < ${#words[@]}; i++)); do + if [[ ${words[i]} == -@(f|-?(make)file) ]]; then + # eval for tilde expansion + # suppress error, as this fails when it contains a space + eval "makef_dir=${words[i + 1]%/*}" 2>/dev/null + break + fi + done + + if [ -z "${makef_dir}" ]; then + makef_dir=${cwd} + elif [[ ${makef_dir} != /* ]]; then + makef_dir=${cwd}/${makef_dir} + fi + + # If ${makef_dir} is a build directory created by the O= option, there + # is a symbolic link 'source', which points to the kernel source tree. + if [[ -L ${makef_dir}/source ]]; then + makef_dir=$(readlink "${makef_dir}/source") + fi + + echo "${makef_dir}" +} + +# Get SRCARCH to do a little more clever things +__kbuild_get_srcarch() +{ + local words=("$@") + local arch srcarch uname_m + + # see if ARCH= is explicitly specified + for ((i = 1; i < ${#words[@]}; i++)); do + if [[ ${words[i]} == ARCH=* ]]; then + arch=${words[i]#ARCH=} + break + fi + done + + # If ARCH= is not specified, check the build marchine's architecture + if [[ -z ${arch} ]]; then + uname_m=$(uname -m) + + # shellcheck disable=SC2209 # 'sh' is SuperH, not a shell command + case ${uname_m} in + arm64 | aarch64*) arch=arm64 ;; + arm* | sa110) arch=arm ;; + i?86 | x86_64) arch=x86 ;; + loongarch*) arch=loongarch ;; + mips*) arch=mips ;; + ppc*) arch=powerpc ;; + riscv*) arch=riscv ;; + s390x) arch=s390 ;; + sh[234]*) arch=sh ;; + sun4u) arch=sparc64 ;; + *) arch=${uname_m} ;; + esac + fi + + case ${arch} in + parisc64) srcarch=parisc ;; + sparc32 | sparc64) srcarch=sparc ;; + i386 | x86_64) srcarch=x86 ;; + *) srcarch=${arch} ;; + esac + + echo "$srcarch" +} + +# small Makefile to parse obj-* syntax +__kbuild_tmp_makefile() +{ +cat <<'EOF' +.PHONY: __default +__default: + $(foreach m,$(obj-y) $(obj-m) $(obj-),$(foreach s, -objs -y -m -,$($(m:%.o=%$s))) $(m)) +EOF +echo "include ${1}" +} + +_make_for_kbuild () +{ + # shellcheck disable=SC2034 # these are set by _init_completion + local cur prev words cword split + _init_completion -s || return + + local srctree + srctree=$(__kbuild_get_srctree "${words[@]}") + + # If 'kernel' and 'Documentation' directories are found, we assume this + # is a kernel tree. Otherwise, we fall back to the generic rule provided + # by the bash-completion project. + if [[ ! -d ${srctree}/kernel || ! -d ${srctree}/Documentation ]]; then + if [ -n "${__kbuild_default_make_completion}" ]; then + "${__kbuild_default_make_completion}" "$@" + fi + return + fi + + # make options with a parameter (copied from the bash-completion project) + case ${prev} in + --file | --makefile | --old-file | --assume-old | --what-if | --new-file | \ + --assume-new | -!(-*)[foW]) + _filedir + return + ;; + --include-dir | --directory | -!(-*)[ICm]) + _filedir -d + return + ;; + -!(-*)E) + COMPREPLY=($(compgen -v -- "$cur")) + return + ;; + --eval | -!(-*)[DVx]) + return + ;; + --jobs | -!(-*)j) + COMPREPLY=($(compgen -W "{1..$(($(_ncpus) * 2))}" -- "$cur")) + return + ;; + esac + + local keywords=() + + case ${cur} in + -*) + # make options (copied from the bash-completion project) + local opts + opts="$(_parse_help "$1")" + COMPREPLY=($(compgen -W "${opts:-$(_parse_usage "$1")}" -- "$cur")) + if [[ ${COMPREPLY-} == *= ]]; then + compopt -o nospace + fi + return + ;; + *=*) + __kbuild_handle_variable "${cur}" "${srctree}" + return + ;; + KBUILD_*) + # There are many variables prefixed with 'KBUILD_'. + # Display them only when 'KBUILD_' is entered. + # shellcheck disable=SC2191 # '=' is appended for variables + keywords+=( + KBUILD_{CHECKSRC,EXTMOD,EXTMOD_OUTPUT,OUTPUT,VERBOSE,EXTRA_WARN,CLIPPY}= + KBUILD_BUILD_{USER,HOST,TIMESTAMP}= + KBUILD_MODPOST_{NOFINAL,WARN}= + KBUILD_{ABS_SRCTREE,EXTRA_SYMBOLS,KCONFIG}= + ) + ;; + KCONFIG_*) + # There are many variables prefixed with 'KCONFIG_'. + # Display them only when 'KCONFIG_' is entered. + # shellcheck disable=SC2191 # '=' is appended for variables + keywords+=( + KCONFIG_{CONFIG,ALLCONFIG,NOSILENTUPDATE,OVERWRITECONFIG}= + KCONFIG_{SEED,PROBABILITY}= + KCONFIG_WARN_UNKNOWN_SYMBOL= + KCONFIG_WERROR= + ) + ;; + *) + # By default, hide KBUILD_* and KCONFIG_* variables. + # Instead, display only the prefix parts. + keywords+=(KBUILD_ KCONFIG_) + ;; + esac + + if [[ ${cur} != /* && ${cur} != *//* ]]; then + local dir srcarch kbuild_file tmp + srcarch=$(__kbuild_get_srcarch "${words[@]}") + + # single build + dir=${cur} + while true; do + if [[ ${dir} == */* ]]; then + dir=${dir%/*} + else + dir=. + fi + + # Search for 'Kbuild' or 'Makefile' in the parent + # directories (may not be a direct parent) + if [[ -f ${srctree}/${dir}/Kbuild ]]; then + kbuild_file=${srctree}/${dir}/Kbuild + break + fi + if [[ -f ${srctree}/${dir}/Makefile ]]; then + kbuild_file=${srctree}/${dir}/Makefile + break + fi + + if [[ ${dir} == . ]]; then + break + fi + done + + if [[ -n ${kbuild_file} ]]; then + tmp=($(__kbuild_tmp_makefile "${kbuild_file}" | + SRCARCH=${srcarch} obj=${dir} src=${srctree}/${dir} \ + "${1}" -n -f - 2>/dev/null)) + + # Add $(obj)/ prefix + if [[ ${dir} != . ]]; then + tmp=("${tmp[@]/#/${dir}\/}") + fi + + keywords+=("${tmp[@]}") + fi + + # *_defconfig and *.config files. These might be grouped into + # subdirectories, e.g., arch/powerpc/configs/*/*_defconfig. + if [[ ${cur} == */* ]]; then + dir=${cur%/*} + else + dir=. + fi + + tmp=($(find "${srctree}/arch/${srcarch}/configs/${dir}" \ + "${srctree}/kernel/configs/${dir}" \ + -mindepth 1 -maxdepth 1 -type d -printf '%P/\n' \ + -o -printf '%P\n' 2>/dev/null)) + + if [[ ${dir} != . ]]; then + tmp=("${tmp[@]/#/${dir}\/}") + fi + + keywords+=("${tmp[@]}") + fi + + # shellcheck disable=SC2191 # '=' is appended for variables + keywords+=( + # + # variables (append =) + # + ARCH= + CROSS_COMPILE= + LLVM= + C= M= MO= O= V= W= + INSTALL{,_MOD,_HDR,_DTBS}_PATH= + KERNELRELEASE= + + # + # targets + # + all help + clean mrproper distclean + clang-{tidy,analyzer} compile_commands.json + coccicheck + dtbs{,_check,_install} dt_binding_{check,schemas} + headers{,_install} + vmlinux install + modules{,_prepare,_install,_sign} + vdso_install + tags TAGS cscope gtags + rust{available,fmt,fmtcheck} + kernel{version,release} image_name + kselftest{,-all,-install,-clean,-merge} + + # configuration + {,old,olddef,sync,def,savedef,rand,listnew,helpnew,test,tiny}config + {,build_}{menu,n,g,x}config + local{mod,yes}config + all{no,yes,mod,def}config + {yes2mod,mod2yes,mod2no}config + + # docs + {html,textinfo,info,latex,pdf,epub,xml,linkcheck,refcheck,clean}docs + + # package + {,bin,src}{rpm,deb}-pkg + {pacman,dir,tar}-pkg + tar{,gz,bz2,xz,zst}-pkg + perf-tar{,gz,bz2,xz,zst}-src-pkg + ) + + COMPREPLY=($(compgen -W "${keywords[*]}" -- "${cur}")) + + # Do not append a space for variables, subdirs, "KBUILD_", "KCONFIG_". + if [[ ${COMPREPLY-} == *[=/] || ${COMPREPLY-} =~ ^(KBUILD|KCONFIG)_$ ]]; then + compopt -o nospace + fi + +} && complete -F _make_for_kbuild make -- cgit v1.2.3 From 87bb368d0637c466a8a77433837056f981d01991 Mon Sep 17 00:00:00 2001 From: Kris Van Hees Date: Fri, 7 Mar 2025 11:53:28 -0500 Subject: kbuild: exclude .rodata.(cst|str)* when building ranges The .rodata.(cst|str)* sections are often resized during the final linking and since these sections do not cover actual symbols there is no need to include them in the modules.builtin.ranges data. When these sections were included in processing and resizing occurred, modules were reported with ranges that extended beyond their true end, causing subsequent symbols (in address order) to be associated with the wrong module. Fixes: 5f5e7344322f ("kbuild: generate offset range data for builtin modules") Cc: stable@vger.kernel.org Signed-off-by: Kris Van Hees Reviewed-by: Jack Vogel Signed-off-by: Masahiro Yamada --- scripts/generate_builtin_ranges.awk | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'scripts') diff --git a/scripts/generate_builtin_ranges.awk b/scripts/generate_builtin_ranges.awk index b9ec761b3bef..d4bd5c2b998c 100755 --- a/scripts/generate_builtin_ranges.awk +++ b/scripts/generate_builtin_ranges.awk @@ -282,6 +282,11 @@ ARGIND == 2 && !anchor && NF == 2 && $1 ~ /^0x/ && $2 !~ /^0x/ { # section. # ARGIND == 2 && sect && NF == 4 && /^ [^ \*]/ && !($1 in sect_addend) { + # There are a few sections with constant data (without symbols) that + # can get resized during linking, so it is best to ignore them. + if ($1 ~ /^\.rodata\.(cst|str)[0-9]/) + next; + if (!($1 in sect_base)) { sect_base[$1] = base; -- cgit v1.2.3 From ba4d705046fb568bad4aeffeb79db78d4e835a1f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 13 Mar 2025 19:26:03 +0900 Subject: kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y Commit 5cc124720461 ("kbuild: add CONFIG_VMLINUX_MAP expert option") mentioned that "the .map file can be rather large (several MB), and that's a waste of space when one isn't interested in these things." If that is the case, generating map files for the intermediate tmp_vmlinux* files is also a waste of space. It is unlikely that anyone would be interested in the .tmp_vmlinux*.map files. This commit stops passing the -Map= option when linking the .tmp_vmlinux* intermediates. I also hard-coded the file name 'vmlinux.map' instead of ${output}.map because a later commit will introduce vmlinux.unstripped but I want to keep the current name of the map file. Signed-off-by: Masahiro Yamada Acked-by: Ard Biesheuvel --- scripts/link-vmlinux.sh | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index 56a077d204cf..96ae0bb65308 100755 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -97,8 +97,8 @@ vmlinux_link() ldflags="${ldflags} ${wl}--strip-debug" fi - if is_enabled CONFIG_VMLINUX_MAP; then - ldflags="${ldflags} ${wl}-Map=${output}.map" + if [ -n "${generate_map}" ]; then + ldflags="${ldflags} ${wl}-Map=vmlinux.map" fi ${ld} ${ldflags} -o ${output} \ @@ -210,6 +210,7 @@ fi btf_vmlinux_bin_o= kallsymso= strip_debug= +generate_map= if is_enabled CONFIG_KALLSYMS; then true > .tmp_vmlinux0.syms @@ -278,6 +279,10 @@ fi strip_debug= +if is_enabled CONFIG_VMLINUX_MAP; then + generate_map=1 +fi + vmlinux_link vmlinux # fill in BTF IDs -- cgit v1.2.3 From e22bbb8e97846bfb5a6942a2322f0237ff13df0f Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 11 Mar 2025 12:06:18 +0100 Subject: kbuild: link-vmlinux.sh: Make output file name configurable In order to introduce an intermediate, non-stripped vmlinux build that can be used by other build steps as an input, pass the output file name to link-vmlinux.sh via its command line. Signed-off-by: Ard Biesheuvel Signed-off-by: Masahiro Yamada --- scripts/Makefile.vmlinux | 2 +- scripts/link-vmlinux.sh | 15 ++++++++------- 2 files changed, 9 insertions(+), 8 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux index fb79fd6b2465..487f0bf716ad 100644 --- a/scripts/Makefile.vmlinux +++ b/scripts/Makefile.vmlinux @@ -69,7 +69,7 @@ ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink) # Final link of vmlinux with optional arch pass after final link cmd_link_vmlinux = \ - $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \ + $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)" "$@"; \ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true) targets += vmlinux diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index 96ae0bb65308..b3d928925598 100755 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -31,6 +31,7 @@ set -e LD="$1" KBUILD_LDFLAGS="$2" LDFLAGS_vmlinux="$3" +VMLINUX="$4" is_enabled() { grep -q "^$1=y" include/config/auto.conf @@ -283,23 +284,23 @@ if is_enabled CONFIG_VMLINUX_MAP; then generate_map=1 fi -vmlinux_link vmlinux +vmlinux_link "${VMLINUX}" # fill in BTF IDs if is_enabled CONFIG_DEBUG_INFO_BTF; then - info BTFIDS vmlinux + info BTFIDS "${VMLINUX}" RESOLVE_BTFIDS_ARGS="" if is_enabled CONFIG_WERROR; then RESOLVE_BTFIDS_ARGS=" --fatal_warnings " fi - ${RESOLVE_BTFIDS} ${RESOLVE_BTFIDS_ARGS} vmlinux + ${RESOLVE_BTFIDS} ${RESOLVE_BTFIDS_ARGS} "${VMLINUX}" fi -mksysmap vmlinux System.map +mksysmap "${VMLINUX}" System.map if is_enabled CONFIG_BUILDTIME_TABLE_SORT; then - info SORTTAB vmlinux - if ! sorttable vmlinux; then + info SORTTAB "${VMLINUX}" + if ! sorttable "${VMLINUX}"; then echo >&2 Failed to sort kernel tables exit 1 fi @@ -315,4 +316,4 @@ if is_enabled CONFIG_KALLSYMS; then fi # For fixdep -echo "vmlinux: $0" > .vmlinux.d +echo "${VMLINUX}: $0" > ".${VMLINUX}.d" -- cgit v1.2.3 From ac4f06789b4f9c17357e81e918879c6e2ffdd075 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 11 Mar 2025 12:06:20 +0100 Subject: kbuild: Create intermediate vmlinux build with relocations preserved The imperative paradigm used to build vmlinux, extract some info from it or perform some checks on it, and subsequently modify it again goes against the declarative paradigm that is usually employed for defining make rules. In particular, the Makefile.postlink files that consume their input via an output rule result in some dodgy logic in the decompressor makefiles for RISC-V and x86, given that the vmlinux.relocs input file needed to generate the arch-specific relocation tables may not exist or be out of date, but cannot be constructed using the ordinary Make dependency based rules, because the info needs to be extracted while vmlinux is in its ephemeral, non-stripped form. So instead, for architectures that require the static relocations that are emitted into vmlinux when passing --emit-relocs to the linker, and are subsequently stripped out again, introduce an intermediate vmlinux target called vmlinux.unstripped, and organize the reset of the build logic accordingly: - vmlinux.unstripped is created only once, and not updated again - build rules under arch/*/boot can depend on vmlinux.unstripped without running the risk of the data disappearing or being out of date - the final vmlinux generated by the build is not bloated with static relocations that are never needed again after the build completes. Signed-off-by: Ard Biesheuvel Signed-off-by: Masahiro Yamada --- scripts/Makefile.lib | 3 --- scripts/Makefile.vmlinux | 28 +++++++++++++++++++++------- 2 files changed, 21 insertions(+), 10 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 47f56ef71937..d1856a70c919 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -371,9 +371,6 @@ quiet_cmd_ar = AR $@ quiet_cmd_objcopy = OBJCOPY $@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ -quiet_cmd_strip_relocs = RSTRIP $@ -cmd_strip_relocs = $(OBJCOPY) --remove-section='.rel*' $@ - # Gzip # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux index 487f0bf716ad..b0a6cd5b818c 100644 --- a/scripts/Makefile.vmlinux +++ b/scripts/Makefile.vmlinux @@ -9,6 +9,20 @@ include $(srctree)/scripts/Makefile.lib targets := +ifdef CONFIG_ARCH_VMLINUX_NEEDS_RELOCS +vmlinux-final := vmlinux.unstripped + +quiet_cmd_strip_relocs = RSTRIP $@ + cmd_strip_relocs = $(OBJCOPY) --remove-section='.rel*' $< $@ + +vmlinux: $(vmlinux-final) FORCE + $(call if_changed,strip_relocs) + +targets += vmlinux +else +vmlinux-final := vmlinux +endif + %.o: %.c FORCE $(call if_changed_rule,cc_o_c) @@ -47,7 +61,7 @@ targets += .builtin-dtbs-list ifdef CONFIG_GENERIC_BUILTIN_DTB targets += .builtin-dtbs.S .builtin-dtbs.o -vmlinux: .builtin-dtbs.o +$(vmlinux-final): .builtin-dtbs.o endif # vmlinux @@ -55,11 +69,11 @@ endif ifdef CONFIG_MODULES targets += .vmlinux.export.o -vmlinux: .vmlinux.export.o +$(vmlinux-final): .vmlinux.export.o endif ifdef CONFIG_ARCH_WANTS_PRE_LINK_VMLINUX -vmlinux: arch/$(SRCARCH)/tools/vmlinux.arch.o +$(vmlinux-final): arch/$(SRCARCH)/tools/vmlinux.arch.o arch/$(SRCARCH)/tools/vmlinux.arch.o: vmlinux.o FORCE $(Q)$(MAKE) $(build)=arch/$(SRCARCH)/tools $@ @@ -72,11 +86,11 @@ cmd_link_vmlinux = \ $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)" "$@"; \ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true) -targets += vmlinux -vmlinux: scripts/link-vmlinux.sh vmlinux.o $(KBUILD_LDS) FORCE +targets += $(vmlinux-final) +$(vmlinux-final): scripts/link-vmlinux.sh vmlinux.o $(KBUILD_LDS) FORCE +$(call if_changed_dep,link_vmlinux) ifdef CONFIG_DEBUG_INFO_BTF -vmlinux: $(RESOLVE_BTFIDS) +$(vmlinux-final): $(RESOLVE_BTFIDS) endif ifdef CONFIG_BUILDTIME_TABLE_SORT @@ -96,7 +110,7 @@ modules.builtin.ranges: $(srctree)/scripts/generate_builtin_ranges.awk \ modules.builtin vmlinux.map vmlinux.o.map FORCE $(call if_changed,modules_builtin_ranges) -vmlinux.map: vmlinux +vmlinux.map: $(vmlinux-final) @: endif -- cgit v1.2.3 From 7e752910b8acd1527af34b51851998feb33cc028 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 12 Mar 2025 04:01:33 +0900 Subject: kbuild: deb-pkg: fix versioning for -rc releases The version number with -rc should be considered older than the final release. For example, 6.14-rc1 should be older than 6.14, but to handle this correctly (just like Debian kernel), "-rc" must be replace with "~rc". $ dpkg --compare-versions 6.14-rc1 lt 6.14 $ echo $? 1 $ dpkg --compare-versions 6.14~rc1 lt 6.14 $ echo $? 0 Signed-off-by: Masahiro Yamada Reviewed-by: Nathan Chancellor --- scripts/package/mkdebian | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian index 0178000197fe..07ca3528e8ea 100755 --- a/scripts/package/mkdebian +++ b/scripts/package/mkdebian @@ -161,7 +161,9 @@ version=$KERNELRELEASE if [ "${KDEB_PKGVERSION:+set}" ]; then packageversion=$KDEB_PKGVERSION else - packageversion=$(${srctree}/scripts/setlocalversion --no-local ${srctree})-$($srctree/scripts/build-version) + upstream_version=$("${srctree}/scripts/setlocalversion" --no-local "${srctree}" | sed 's/-\(rc[1-9]\)/~\1/') + debian_revision=$("${srctree}/scripts/build-version") + packageversion=${upstream_version}-${debian_revision} fi sourcename=${KDEB_SOURCENAME:-linux-upstream} -- cgit v1.2.3 From 1c3107ec73921088e55b7ff35861b9303962fd34 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 12 Mar 2025 04:02:24 +0900 Subject: kbuild: deb-pkg: remove "version" variable in mkdebian ${version} and ${KERNELRELEASE} are the same. Signed-off-by: Masahiro Yamada Reviewed-by: Nathan Chancellor --- scripts/package/mkdebian | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'scripts') diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian index 07ca3528e8ea..744ddba01d93 100755 --- a/scripts/package/mkdebian +++ b/scripts/package/mkdebian @@ -157,7 +157,6 @@ while [ $# -gt 0 ]; do done # Some variables and settings used throughout the script -version=$KERNELRELEASE if [ "${KDEB_PKGVERSION:+set}" ]; then packageversion=$KDEB_PKGVERSION else @@ -216,11 +215,11 @@ Build-Depends-Arch: bc, bison, flex, python3:native, rsync Homepage: https://www.kernel.org/ -Package: $packagename-$version +Package: $packagename-${KERNELRELEASE} Architecture: $debarch -Description: Linux kernel, version $version +Description: Linux kernel, version ${KERNELRELEASE} This package contains the Linux kernel, modules and corresponding other - files, version: $version. + files, version: ${KERNELRELEASE}. EOF if [ "${SRCARCH}" != um ]; then @@ -239,11 +238,11 @@ EOF if is_enabled CONFIG_MODULES; then cat <> debian/control -Package: linux-headers-$version +Package: linux-headers-${KERNELRELEASE} Architecture: $debarch Build-Profiles: -Description: Linux kernel headers for $version on $debarch - This package provides kernel header files for $version on $debarch +Description: Linux kernel headers for ${KERNELRELEASE} on $debarch + This package provides kernel header files for ${KERNELRELEASE} on $debarch . This is useful for people who need to build external modules EOF @@ -253,11 +252,11 @@ fi if is_enabled CONFIG_DEBUG_INFO; then cat <> debian/control -Package: linux-image-$version-dbg +Package: linux-image-${KERNELRELEASE}-dbg Section: debug Architecture: $debarch Build-Profiles: -Description: Linux kernel debugging symbols for $version +Description: Linux kernel debugging symbols for ${KERNELRELEASE} This package will come in handy if you need to debug the kernel. It provides all the necessary debug symbols for the kernel and its modules. EOF -- cgit v1.2.3 From a7a05b1b2739b94870b499818986b82974839fe0 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 14 Mar 2025 18:53:35 +0900 Subject: kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS 'man dpkg-deb' describes as follows: DPKG_DEB_COMPRESSOR_TYPE Sets the compressor type to use (since dpkg 1.21.10). The -Z option overrides this value. When commit 1a7f0a34ea7d ("builddeb: allow selection of .deb compressor") was applied, dpkg-deb did not support this environment variable. Later, dpkg commit c10aeffc6d71 ("dpkg-deb: Add support for DPKG_DEB_COMPRESSOR_TYPE/LEVEL") introduced support for DPKG_DEB_COMPRESSOR_TYPE, which provides the same functionality as KDEB_COMPRESS. KDEB_COMPRESS is still useful for users of older dpkg versions, but I would like to remove this redundant functionality in the future. This commit adds comments to notify users of the planned removal and to encourage migration to DPKG_DEB_COMPRESSOR_TYPE where possible. Signed-off-by: Masahiro Yamada --- scripts/package/debian/rules | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'scripts') diff --git a/scripts/package/debian/rules b/scripts/package/debian/rules index ca07243bd5cd..33bfd00974b3 100755 --- a/scripts/package/debian/rules +++ b/scripts/package/debian/rules @@ -41,6 +41,10 @@ package = $($(@:binary-%=%-package)) # which package is being processed in the build log. DH_OPTIONS = -p$(package) +# Note: future removal of KDEB_COMPRESS +# dpkg-deb >= 1.21.10 supports the DPKG_DEB_COMPRESSOR_TYPE environment +# variable, which provides the same functionality as KDEB_COMPRESS. The +# KDEB_COMPRESS variable will be removed in the future. define binary $(Q)dh_testdir $(DH_OPTIONS) $(Q)dh_testroot $(DH_OPTIONS) -- cgit v1.2.3 From 6c6c1fc09de35f409f6971cb9e881103afe5dbe0 Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Tue, 11 Mar 2025 12:49:02 -0700 Subject: modpost: require a MODULE_DESCRIPTION() Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing"), a module without a MODULE_DESCRIPTION() has resulted in a warning with make W=1. Since that time, all known instances of this issue have been fixed. Therefore, now make it an error if a MODULE_DESCRIPTION() is not present. Signed-off-by: Jeff Johnson Signed-off-by: Masahiro Yamada --- scripts/mod/modpost.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 7f4c72eca72c..92627e8d0e16 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1602,8 +1602,8 @@ static void read_symbols(const char *modname) namespace); } - if (extra_warn && !get_modinfo(&info, "description")) - warn("missing MODULE_DESCRIPTION() in %s\n", modname); + if (!get_modinfo(&info, "description")) + error("missing MODULE_DESCRIPTION() in %s\n", modname); } for (sym = info.symtab_start; sym < info.symtab_stop; sym++) { -- cgit v1.2.3 From 62604063621fb075c7966286bdddcb057d883fa8 Mon Sep 17 00:00:00 2001 From: Alexandru Gagniuc Date: Fri, 14 Mar 2025 13:10:53 +0000 Subject: kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally In ThinPro, we use the convention +hp for the kernel package. This does not have a dash in the name or version. This is built by editing ".version" before a build, and setting EXTRAVERSION="+hp" and KDEB_PKGVERSION make variables: echo 68 > .version make -j EXTRAVERSION="+hp" bindeb-pkg KDEB_PKGVERSION=6.12.2+hp69 .deb name: linux-image-6.12.2+hp_6.12.2+hp69_amd64.deb Since commit 7d4f07d5cb71 ("kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules"), this no longer works. The deb build logic changed, even though, the commit message implies that the logic should be unmodified. Before, KBUILD_BUILD_VERSION was not set if the KDEB_PKGVERSION did not contain a dash. After the change KBUILD_BUILD_VERSION is always set to KDEB_PKGVERSION. Since this determines UTS_VERSION, the uname output to look off: (now) uname -a: version 6.12.2+hp ... #6.12.2+hp69 (expected) uname -a: version 6.12.2+hp ... #69 Update the debian/rules logic to restore the original behavior. Fixes: 7d4f07d5cb71 ("kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules") Signed-off-by: Alexandru Gagniuc Reviewed-by: Nicolas Schier Signed-off-by: Masahiro Yamada --- scripts/package/debian/rules | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/package/debian/rules b/scripts/package/debian/rules index 33bfd00974b3..a417a7f8bbc1 100755 --- a/scripts/package/debian/rules +++ b/scripts/package/debian/rules @@ -21,9 +21,11 @@ ifeq ($(origin KBUILD_VERBOSE),undefined) endif endif -revision = $(lastword $(subst -, ,$(shell dpkg-parsechangelog -S Version))) +revision = $(shell dpkg-parsechangelog -S Version | sed -n 's/.*-//p') CROSS_COMPILE ?= $(filter-out $(DEB_BUILD_GNU_TYPE)-, $(DEB_HOST_GNU_TYPE)-) -make-opts = ARCH=$(ARCH) KERNELRELEASE=$(KERNELRELEASE) KBUILD_BUILD_VERSION=$(revision) $(addprefix CROSS_COMPILE=,$(CROSS_COMPILE)) +make-opts = ARCH=$(ARCH) KERNELRELEASE=$(KERNELRELEASE) \ + $(addprefix KBUILD_BUILD_VERSION=,$(revision)) \ + $(addprefix CROSS_COMPILE=,$(CROSS_COMPILE)) binary-targets := $(addprefix binary-, image image-dbg headers libc-dev) -- cgit v1.2.3 From 8bdd53e066012bed431667393676d1b5e8cce153 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 16 Mar 2025 00:15:20 +0900 Subject: kbuild: pacman-pkg: hardcode module installation path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'make pacman-pkg' for architectures with device tree support (i.e., arm, arm64, etc.) shows logs like follows: Installing dtbs... INSTALL /home/masahiro/linux/pacman/linux-upstream/pkg/linux-upstream/usr//lib/modules/6.14.0-rc6+/dtb/actions/s700-cubieboard7.dtb INSTALL /home/masahiro/linux/pacman/linux-upstream/pkg/linux-upstream/usr//lib/modules/6.14.0-rc6+/dtb/actions/s900-bubblegum-96.dtb INSTALL /home/masahiro/linux/pacman/linux-upstream/pkg/linux-upstream/usr//lib/modules/6.14.0-rc6+/dtb/airoha/en7581-evb.dtb ... The double slashes ('//') between 'usr' and 'lib' are somewhat ugly. Let's hardcode the module installation path because the package contents should remain unaffected even if ${MODLIB} is overridden. Please note that scripts/packages/{builddeb,kernel.spec} also hardcode the module installation path. With this change, the log will look better, as follows: Installing dtbs... INSTALL /home/masahiro/linux/pacman/linux-upstream/pkg/linux-upstream/usr/lib/modules/6.14.0-rc6+/dtb/actions/s700-cubieboard7.dtb INSTALL /home/masahiro/linux/pacman/linux-upstream/pkg/linux-upstream/usr/lib/modules/6.14.0-rc6+/dtb/actions/s900-bubblegum-96.dtb INSTALL /home/masahiro/linux/pacman/linux-upstream/pkg/linux-upstream/usr/lib/modules/6.14.0-rc6+/dtb/airoha/en7581-evb.dtb ... Signed-off-by: Masahiro Yamada Acked-by: Thomas Weißschuh Reviewed-by: Nathan Chancellor --- scripts/package/PKGBUILD | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/package/PKGBUILD b/scripts/package/PKGBUILD index 0cf3a55b05e1..452374d63c24 100644 --- a/scripts/package/PKGBUILD +++ b/scripts/package/PKGBUILD @@ -53,7 +53,7 @@ build() { _package() { pkgdesc="The ${pkgdesc} kernel and modules" - local modulesdir="${pkgdir}/usr/${MODLIB}" + local modulesdir="${pkgdir}/usr/lib/modules/${KERNELRELEASE}" _prologue @@ -81,7 +81,7 @@ _package() { _package-headers() { pkgdesc="Headers and scripts for building modules for the ${pkgdesc} kernel" - local builddir="${pkgdir}/usr/${MODLIB}/build" + local builddir="${pkgdir}/usr/lib/modules/${KERNELRELEASE}/build" _prologue @@ -114,7 +114,7 @@ _package-debug(){ pkgdesc="Non-stripped vmlinux file for the ${pkgdesc} kernel" local debugdir="${pkgdir}/usr/src/debug/${pkgbase}" - local builddir="${pkgdir}/usr/${MODLIB}/build" + local builddir="${pkgdir}/usr/lib/modules/${KERNELRELEASE}/build" _prologue -- cgit v1.2.3 From a26fe287eed112b4e21e854f173c8918a6a8596d Mon Sep 17 00:00:00 2001 From: Daniel Gomez Date: Fri, 28 Mar 2025 14:28:37 +0000 Subject: kconfig: merge_config: use an empty file as initfile The scripts/kconfig/merge_config.sh script requires an existing $INITFILE (or the $1 argument) as a base file for merging Kconfig fragments. However, an empty $INITFILE can serve as an initial starting point, later referenced by the KCONFIG_ALLCONFIG Makefile variable if -m is not used. This variable can point to any configuration file containing preset config symbols (the merged output) as stated in Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will contain just the merge output requiring the user to run make (i.e. KCONFIG_ALLCONFIG=<$INITFILE> make or make olddefconfig). Instead of failing when `$INITFILE` is missing, create an empty file and use it as the starting point for merges. Signed-off-by: Daniel Gomez Signed-off-by: Masahiro Yamada --- scripts/kconfig/merge_config.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh index 0b7952471c18..79c09b378be8 100755 --- a/scripts/kconfig/merge_config.sh +++ b/scripts/kconfig/merge_config.sh @@ -112,8 +112,8 @@ INITFILE=$1 shift; if [ ! -r "$INITFILE" ]; then - echo "The base file '$INITFILE' does not exist. Exit." >&2 - exit 1 + echo "The base file '$INITFILE' does not exist. Creating one..." >&2 + touch "$INITFILE" fi MERGE_LIST=$* -- cgit v1.2.3 From a7c699d090a1f3795c3271c2b399230e182db06e Mon Sep 17 00:00:00 2001 From: Uday Shankar Date: Mon, 31 Mar 2025 16:46:32 -0600 Subject: kbuild: rpm-pkg: build a debuginfo RPM The rpm-pkg make target currently suffers from a few issues related to debuginfo: 1. debuginfo for things built into the kernel (vmlinux) is not available in any RPM produced by make rpm-pkg. This makes using tools like systemtap against a make rpm-pkg kernel impossible. 2. debug source for the kernel is not available. This means that commands like 'disas /s' in gdb, which display source intermixed with assembly, can only print file names/line numbers which then must be painstakingly resolved to actual source in a separate editor. 3. debuginfo for modules is available, but it remains bundled with the .ko files that contain module code, in the main kernel RPM. This is a waste of space for users who do not need to debug the kernel (i.e. most users). Address all of these issues by additionally building a debuginfo RPM when the kernel configuration allows for it, in line with standard patterns followed by RPM distributors. With these changes: 1. systemtap now works (when these changes are backported to 6.11, since systemtap lags a bit behind in compatibility), as verified by the following simple test script: # stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }' dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0 ... 2. disas /s works correctly in gdb, with source and disassembly interspersed: # gdb vmlinux --batch -ex 'disas /s blk_op_str' Dump of assembler code for function blk_op_str: block/blk-core.c: 125 { 0xffffffff814c8740 <+0>: endbr64 127 128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op]) 0xffffffff814c8744 <+4>: mov $0xffffffff824a7378,%rax 0xffffffff814c874b <+11>: cmp $0x23,%edi 0xffffffff814c874e <+14>: ja 0xffffffff814c8768 0xffffffff814c8750 <+16>: mov %edi,%edi 126 const char *op_str = "UNKNOWN"; 0xffffffff814c8752 <+18>: mov $0xffffffff824a7378,%rdx 127 128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op]) 0xffffffff814c8759 <+25>: mov -0x7dfa0160(,%rdi,8),%rax 126 const char *op_str = "UNKNOWN"; 0xffffffff814c8761 <+33>: test %rax,%rax 0xffffffff814c8764 <+36>: cmove %rdx,%rax 129 op_str = blk_op_name[op]; 130 131 return op_str; 132 } 0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk> End of assembler dump. 3. The size of the main kernel package goes down substantially, especially if many modules are built (quite typical). Here is a comparison of installed size of the kernel package (configured with allmodconfig, dwarf4 debuginfo, and module compression turned off) before and after this patch: # rpm -qi kernel-6.13* | grep -E '^(Version|Size)' Version : 6.13.0postpatch+ Size : 1382874089 Version : 6.13.0prepatch+ Size : 17870795887 This is a ~92% size reduction. Note that a debuginfo package can only be produced if the following configs are set: - CONFIG_DEBUG_INFO=y - CONFIG_MODULE_COMPRESS=n - CONFIG_DEBUG_INFO_SPLIT=n The first of these is obvious - we can't produce debuginfo if the build does not generate it. The second two requirements can in principle be removed, but doing so is difficult with the current approach, which uses a generic rpmbuild script find-debuginfo.sh that processes all packaged executables. If we want to remove those requirements the best path forward is likely to add some debuginfo extraction/installation logic to the modules_install target (controllable by flags). That way, it's easier to operate on modules before they're compressed, and the logic can be reused by all packaging targets. Signed-off-by: Uday Shankar Signed-off-by: Masahiro Yamada --- scripts/package/kernel.spec | 46 +++++++++++++++++++++++++++++++++++++++++++-- scripts/package/mkspec | 10 ++++++++++ 2 files changed, 54 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/package/kernel.spec b/scripts/package/kernel.spec index ac3e5ac01d8a..726f34e11960 100644 --- a/scripts/package/kernel.spec +++ b/scripts/package/kernel.spec @@ -2,8 +2,6 @@ %{!?_arch: %define _arch dummy} %{!?make: %define make make} %define makeflags %{?_smp_mflags} ARCH=%{ARCH} -%define __spec_install_post /usr/lib/rpm/brp-compress || : -%define debug_package %{nil} Name: kernel Summary: The Linux Kernel @@ -46,6 +44,36 @@ This package provides kernel headers and makefiles sufficient to build modules against the %{version} kernel package. %endif +%if %{with_debuginfo} +# list of debuginfo-related options taken from distribution kernel.spec +# files +%undefine _include_minidebuginfo +%undefine _find_debuginfo_dwz_opts +%undefine _unique_build_ids +%undefine _unique_debug_names +%undefine _unique_debug_srcs +%undefine _debugsource_packages +%undefine _debuginfo_subpackages +%global _find_debuginfo_opts -r +%global _missing_build_ids_terminate_build 1 +%global _no_recompute_build_ids 1 +%{debug_package} +%endif +# some (but not all) versions of rpmbuild emit %%debug_package with +# %%install. since we've already emitted it manually, that would cause +# a package redefinition error. ensure that doesn't happen +%define debug_package %{nil} + +# later, we make all modules executable so that find-debuginfo.sh strips +# them up. but they don't actually need to be executable, so remove the +# executable bit, taking care to do it _after_ find-debuginfo.sh has run +%define __spec_install_post \ + %{?__debug_package:%{__debug_install_post}} \ + %{__arch_install_post} \ + %{__os_install_post} \ + find %{buildroot}/lib/modules/%{KERNELRELEASE} -name "*.ko" -type f \\\ + | xargs --no-run-if-empty chmod u-x + %prep %setup -q -n linux cp %{SOURCE1} .config @@ -89,8 +117,22 @@ ln -fns /usr/src/kernels/%{KERNELRELEASE} %{buildroot}/lib/modules/%{KERNELRELEA echo "%exclude /lib/modules/%{KERNELRELEASE}/build" } > %{buildroot}/kernel.list +# make modules executable so that find-debuginfo.sh strips them. this +# will be undone later in %%__spec_install_post +find %{buildroot}/lib/modules/%{KERNELRELEASE} -name "*.ko" -type f \ + | xargs --no-run-if-empty chmod u+x + +%if %{with_debuginfo} +# copying vmlinux directly to the debug directory means it will not get +# stripped (but its source paths will still be collected + fixed up) +mkdir -p %{buildroot}/usr/lib/debug/lib/modules/%{KERNELRELEASE} +cp vmlinux %{buildroot}/usr/lib/debug/lib/modules/%{KERNELRELEASE} +%endif + %clean rm -rf %{buildroot} +rm -f debugfiles.list debuglinks.list debugsourcefiles.list debugsources.list \ + elfbins.list %post if [ -x /usr/bin/kernel-install ]; then diff --git a/scripts/package/mkspec b/scripts/package/mkspec index 4dc1466dfc81..c7375bfc25a9 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -23,6 +23,16 @@ else echo '%define with_devel 0' fi +# debuginfo package generation uses find-debuginfo.sh under the hood, +# which only works on uncompressed modules that contain debuginfo +if grep -q CONFIG_DEBUG_INFO=y include/config/auto.conf && + (! grep -q CONFIG_MODULE_COMPRESS=y include/config/auto.conf) && + (! grep -q CONFIG_DEBUG_INFO_SPLIT=y include/config/auto.conf); then +echo '%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}' +else +echo '%define with_debuginfo 0' +fi + cat< Date: Sun, 6 Apr 2025 10:00:04 -0700 Subject: Disable SLUB_TINY for build testing ... and don't error out so hard on missing module descriptions. Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") we used to warn about missing module descriptions, but only when building with extra warnigns (ie 'W=1'). After that commit the warning became an unconditional hard error. And it turns out not all modules have been converted despite the claims to the contrary. As reported by Damian Tometzki, the slub KUnit test didn't have a module description, and apparently nobody ever really noticed. The reason nobody noticed seems to be that the slub KUnit tests get disabled by SLUB_TINY, which also ends up disabling a lot of other code, both in tests and in slub itself. And so anybody doing full build tests didn't actually see this failre. So let's disable SLUB_TINY for build-only tests, since it clearly ends up limiting build coverage. Also turn the missing module descriptions error back into a warning, but let's keep it around for non-'W=1' builds. Reported-by: Damian Tometzki Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/ Cc: Masahiro Yamada Cc: Jeff Johnson Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") Signed-off-by: Linus Torvalds --- scripts/mod/modpost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 92627e8d0e16..be89921d60b6 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1603,7 +1603,7 @@ static void read_symbols(const char *modname) } if (!get_modinfo(&info, "description")) - error("missing MODULE_DESCRIPTION() in %s\n", modname); + warn("missing MODULE_DESCRIPTION() in %s\n", modname); } for (sym = info.symtab_start; sym < info.symtab_stop; sym++) { -- cgit v1.2.3 From 05a2b0011c4b6cbbc9b577f6abebe4e9333b0cf6 Mon Sep 17 00:00:00 2001 From: Lukas Fischer Date: Fri, 4 Apr 2025 14:51:51 +0200 Subject: scripts: generate_rust_analyzer: Add ffi crate Commit d072acda4862 ("rust: use custom FFI integer types") did not update rust-analyzer to include the new crate. To enable rust-analyzer support for these custom ffi types, add the `ffi` crate as a dependency to the `bindings`, `uapi` and `kernel` crates, which all directly depend on it. Fixes: d072acda4862 ("rust: use custom FFI integer types") Signed-off-by: Lukas Fischer Reviewed-by: Tamir Duberstein Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250404125150.85783-2-kernel@o1oo11oo.de Signed-off-by: Miguel Ojeda --- scripts/generate_rust_analyzer.py | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/generate_rust_analyzer.py b/scripts/generate_rust_analyzer.py index cd41bc906fbd..fe663dd0c43b 100755 --- a/scripts/generate_rust_analyzer.py +++ b/scripts/generate_rust_analyzer.py @@ -112,6 +112,12 @@ def generate_crates(srctree, objtree, sysroot_src, external_src, cfgs): cfg=["kernel"], ) + append_crate( + "ffi", + srctree / "rust" / "ffi.rs", + ["core", "compiler_builtins"], + ) + def append_crate_with_generated( display_name, deps, @@ -131,9 +137,9 @@ def generate_crates(srctree, objtree, sysroot_src, external_src, cfgs): "exclude_dirs": [], } - append_crate_with_generated("bindings", ["core"]) - append_crate_with_generated("uapi", ["core"]) - append_crate_with_generated("kernel", ["core", "macros", "build_error", "pin_init", "bindings", "uapi"]) + append_crate_with_generated("bindings", ["core", "ffi"]) + append_crate_with_generated("uapi", ["core", "ffi"]) + append_crate_with_generated("kernel", ["core", "macros", "build_error", "pin_init", "ffi", "bindings", "uapi"]) def is_root_crate(build_file, target): try: -- cgit v1.2.3 From 1013f5636fd808569c1f4c40a58a4efc70713a28 Mon Sep 17 00:00:00 2001 From: Uros Bizjak Date: Mon, 14 Apr 2025 00:07:34 +0200 Subject: genksyms: Handle typeof_unqual keyword and __seg_{fs,gs} qualifiers Handle typeof_unqual, __typeof_unqual and __typeof_unqual__ keywords using TYPEOF_KEYW token in the same way as typeof keyword. Also ignore x86 __seg_fs and __seg_gs named address space qualifiers using X86_SEG_KEYW token in the same way as const, volatile or restrict qualifiers. Fixes: ac053946f5c4 ("compiler.h: introduce TYPEOF_UNQUAL() macro") Closes: https://lore.kernel.org/lkml/81a25a60-de78-43fb-b56a-131151e1c035@molgen.mpg.de/ Reported-by: Paul Menzel Signed-off-by: Uros Bizjak Signed-off-by: Ingo Molnar Cc: Andrew Morton Cc: Linus Torvalds Cc: Masahiro Yamada Link: https://lore.kernel.org/r/20250413220749.270704-1-ubizjak@gmail.com --- scripts/genksyms/keywords.c | 7 +++++++ scripts/genksyms/parse.y | 5 ++++- 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/genksyms/keywords.c b/scripts/genksyms/keywords.c index b85e0979a00c..ee1499d27061 100644 --- a/scripts/genksyms/keywords.c +++ b/scripts/genksyms/keywords.c @@ -17,6 +17,8 @@ static struct resword { { "__signed__", SIGNED_KEYW }, { "__typeof", TYPEOF_KEYW }, { "__typeof__", TYPEOF_KEYW }, + { "__typeof_unqual", TYPEOF_KEYW }, + { "__typeof_unqual__", TYPEOF_KEYW }, { "__volatile", VOLATILE_KEYW }, { "__volatile__", VOLATILE_KEYW }, { "__builtin_va_list", VA_LIST_KEYW }, @@ -40,6 +42,10 @@ static struct resword { // KAO. }, // { "attribute", ATTRIBUTE_KEYW }, + // X86 named address space qualifiers + { "__seg_gs", X86_SEG_KEYW }, + { "__seg_fs", X86_SEG_KEYW }, + { "auto", AUTO_KEYW }, { "char", CHAR_KEYW }, { "const", CONST_KEYW }, @@ -57,6 +63,7 @@ static struct resword { { "struct", STRUCT_KEYW }, { "typedef", TYPEDEF_KEYW }, { "typeof", TYPEOF_KEYW }, + { "typeof_unqual", TYPEOF_KEYW }, { "union", UNION_KEYW }, { "unsigned", UNSIGNED_KEYW }, { "void", VOID_KEYW }, diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y index ee600a804fa1..efdcf07c4eb6 100644 --- a/scripts/genksyms/parse.y +++ b/scripts/genksyms/parse.y @@ -91,6 +91,8 @@ static void record_compound(struct string_list **keyw, %token TYPEOF_KEYW %token VA_LIST_KEYW +%token X86_SEG_KEYW + %token EXPORT_SYMBOL_KEYW %token ASM_PHRASE @@ -292,7 +294,8 @@ type_qualifier_seq: ; type_qualifier: - CONST_KEYW | VOLATILE_KEYW + X86_SEG_KEYW + | CONST_KEYW | VOLATILE_KEYW | RESTRICT_KEYW { /* restrict has no effect in prototypes so ignore it */ remove_node($1); -- cgit v1.2.3 From 46e24a545cdb4556f8128c90ecc34eeae52477a0 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Wed, 9 Apr 2025 00:03:11 +0200 Subject: rust: kasan/kbuild: fix missing flags on first build If KASAN is enabled, and one runs in a clean repository e.g.: make LLVM=1 prepare make LLVM=1 prepare Then the Rust code gets rebuilt, which should not happen. The reason is some of the LLVM KASAN `rustc` flags are added in the second run: -Cllvm-args=-asan-instrumentation-with-call-threshold=10000 -Cllvm-args=-asan-stack=0 -Cllvm-args=-asan-globals=1 -Cllvm-args=-asan-kernel-mem-intrinsic-prefix=1 Further runs do not rebuild Rust because the flags do not change anymore. Rebuilding like that in the second run is bad, even if this just happens with KASAN enabled, but missing flags in the first one is even worse. The root issue is that we pass, for some architectures and for the moment, a generated `target.json` file. That file is not ready by the time `rustc` gets called for the flag test, and thus the flag test fails just because the file is not available, e.g.: $ ... --target=./scripts/target.json ... -Cllvm-args=... error: target file "./scripts/target.json" does not exist There are a few approaches we could take here to solve this. For instance, we could ensure that every time that the config is rebuilt, we regenerate the file and recompute the flags. Or we could use the LLVM version to check for these flags, instead of testing the flag (which may have other advantages, such as allowing us to detect renames on the LLVM side). However, it may be easier than that: `rustc` is aware of the `-Cllvm-args` regardless of the `--target` (e.g. I checked that the list printed is the same, plus that I can check for these flags even if I pass a completely unrelated target), and thus we can just eliminate the dependency completely. Thus filter out the target. This does mean that `rustc-option` cannot be used to test a flag that requires the right target, but we don't have other users yet, it is a minimal change and we want to get rid of custom targets in the future. We could only filter in the case `target.json` is used, to make it work in more cases, but then it would be harder to notice that it may not work in a couple architectures. Cc: Matthew Maurer Cc: Sami Tolvanen Cc: stable@vger.kernel.org Fixes: e3117404b411 ("kbuild: rust: Enable KASAN support") Tested-by: Alice Ryhl Link: https://lore.kernel.org/r/20250408220311.1033475-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda --- scripts/Makefile.compiler | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/Makefile.compiler b/scripts/Makefile.compiler index 8956587b8547..7ed7f92a7daa 100644 --- a/scripts/Makefile.compiler +++ b/scripts/Makefile.compiler @@ -80,7 +80,7 @@ ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3)) # TODO: remove RUSTC_BOOTSTRAP=1 when we raise the minimum GNU Make version to 4.4 __rustc-option = $(call try-run,\ echo '#![allow(missing_docs)]#![feature(no_core)]#![no_core]' | RUSTC_BOOTSTRAP=1\ - $(1) --sysroot=/dev/null $(filter-out --sysroot=/dev/null,$(2)) $(3)\ + $(1) --sysroot=/dev/null $(filter-out --sysroot=/dev/null --target=%,$(2)) $(3)\ --crate-type=rlib --out-dir=$(TMPOUT) --emit=obj=- - >/dev/null,$(3),$(4)) # rustc-option -- cgit v1.2.3 From 1c4494c14b4124f3a13a7f4912b84b633ff4f9ba Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Mon, 14 Apr 2025 19:12:41 +0200 Subject: rust: kbuild: use `pound` to support GNU Make < 4.3 GNU Make 4.3 changed the behavior of `#` inside commands in commit c6966b323811 ("[SV 20513] Un-escaped # are not comments in function invocations"): * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: H := \# foo := $(shell echo '$H') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. Unlike other commits in the kernel about this issue, such as commit 633174a7046e ("lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3"), that fixed the issue for newer GNU Makes, in our case it was the opposite, i.e. we need to fix it for the older ones: someone building with e.g. 4.2.1 gets the following error: scripts/Makefile.compiler:81: *** unterminated call to function 'call': missing ')'. Stop. Thus use the existing variable to fix it. Reported-by: moyi geek <1441339168@qq.com> Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/291565/topic/x/near/512001985 Cc: stable@vger.kernel.org Fixes: e72a076c620f ("kbuild: fix issues with rustc-option") Reviewed-by: Nicolas Schier Reviewed-by: Alice Ryhl Link: https://lore.kernel.org/r/20250414171241.2126137-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda --- scripts/Makefile.compiler | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/Makefile.compiler b/scripts/Makefile.compiler index 7ed7f92a7daa..f4fcc1eaaeae 100644 --- a/scripts/Makefile.compiler +++ b/scripts/Makefile.compiler @@ -79,7 +79,7 @@ ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3)) # Usage: MY_RUSTFLAGS += $(call __rustc-option,$(RUSTC),$(MY_RUSTFLAGS),-Cinstrument-coverage,-Zinstrument-coverage) # TODO: remove RUSTC_BOOTSTRAP=1 when we raise the minimum GNU Make version to 4.4 __rustc-option = $(call try-run,\ - echo '#![allow(missing_docs)]#![feature(no_core)]#![no_core]' | RUSTC_BOOTSTRAP=1\ + echo '$(pound)![allow(missing_docs)]$(pound)![feature(no_core)]$(pound)![no_core]' | RUSTC_BOOTSTRAP=1\ $(1) --sysroot=/dev/null $(filter-out --sysroot=/dev/null --target=%,$(2)) $(3)\ --crate-type=rlib --out-dir=$(TMPOUT) --emit=obj=- - >/dev/null,$(3),$(4)) -- cgit v1.2.3