From 95ca90726ea6c9444c752ea370e35ec7b6776434 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 16 Dec 2020 12:55:27 +0100 Subject: selinux: handle MPTCP consistently with TCP The MPTCP protocol uses a specific protocol value, even if it's an extension to TCP. Additionally, MPTCP sockets could 'fall-back' to TCP at run-time, depending on peer MPTCP support and available resources. As a consequence of the specific protocol number, selinux applies the raw_socket class to MPTCP sockets. Existing TCP application converted to MPTCP - or forced to use MPTCP socket with user-space hacks - will need an updated policy to run successfully. This change lets selinux attach the TCP socket class to MPTCP sockets, too, so that no policy changes are needed in the above scenario. Note that the MPTCP is setting, propagating and updating the security context on all the subflows and related request socket. Link: https://lore.kernel.org/linux-security-module/CAHC9VhTaK3xx0hEGByD2zxfF7fadyPP1kb-WeWH_YCyq9X-sRg@mail.gmail.com/T/#t Signed-off-by: Paolo Abeni [PM: tweaked subject's prefix] Signed-off-by: Paul Moore --- security/selinux/hooks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'security/selinux/hooks.c') diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 644b17ec9e63..75e7568cf607 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1120,7 +1120,8 @@ static inline u16 inode_mode_to_security_class(umode_t mode) static inline int default_protocol_stream(int protocol) { - return (protocol == IPPROTO_IP || protocol == IPPROTO_TCP); + return (protocol == IPPROTO_IP || protocol == IPPROTO_TCP || + protocol == IPPROTO_MPTCP); } static inline int default_protocol_dgram(int protocol) -- cgit v1.2.3 From a9ffe682c58aaff643764547f5420e978b6e0830 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Sat, 19 Dec 2020 12:05:27 +0200 Subject: selinux: fix inconsistency between inode_getxattr and inode_listsecurity When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will intercept in inode_getxattr hooks. When selinux LSM is installed but not initialized, it will list the security.selinux xattr in inode_listsecurity, but will not intercept it in inode_getxattr. This results in -ENODATA for a getxattr call for an xattr returned by listxattr. This situation was manifested as overlayfs failure to copy up lower files from squashfs when selinux is built-in but not initialized, because ovl_copy_xattr() iterates the lower inode xattrs by vfs_listxattr() and vfs_getxattr(). Match the logic of inode_listsecurity to that of inode_getxattr and do not list the security.selinux xattr if selinux is not initialized. Reported-by: Michael Labriola Tested-by: Michael Labriola Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/ Fixes: c8e222616c7e ("selinux: allow reading labels before policy is loaded") Cc: stable@vger.kernel.org#v5.9+ Signed-off-by: Amir Goldstein Reviewed-by: Ondrej Mosnacek Signed-off-by: Paul Moore --- security/selinux/hooks.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'security/selinux/hooks.c') diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 75e7568cf607..7fb7ff03eaa9 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3414,6 +3414,10 @@ static int selinux_inode_setsecurity(struct inode *inode, const char *name, static int selinux_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size) { const int len = sizeof(XATTR_NAME_SELINUX); + + if (!selinux_initialized(&selinux_state)) + return 0; + if (buffer && len <= buffer_size) memcpy(buffer, XATTR_NAME_SELINUX, len); return len; -- cgit v1.2.3 From 08abe46b2cfcf5f815cd4961b1bf9e10b1714c6d Mon Sep 17 00:00:00 2001 From: Ondrej Mosnacek Date: Wed, 13 Jan 2021 13:38:02 +0100 Subject: selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support When a superblock is assigned the SECURITY_FS_USE_XATTR behavior by the policy yet it lacks xattr support, try to fall back to genfs rather than rejecting the mount. If a genfscon rule is found for the filesystem, then change the behavior to SECURITY_FS_USE_GENFS, otherwise reject the mount as before. A similar fallback is already done in security_fs_use() if no behavior specification is found for the given filesystem. This is needed e.g. for virtiofs, which may or may not support xattrs depending on the backing host filesystem. Example: # seinfo --genfs | grep ' ramfs' genfscon ramfs / system_u:object_r:ramfs_t:s0 # echo '(fsuse xattr ramfs (system_u object_r fs_t ((s0) (s0))))' >ramfs_xattr.cil # semodule -i ramfs_xattr.cil # mount -t ramfs none /mnt Before: mount: /mnt: mount(2) system call failed: Operation not supported. After: (mount succeeds) # ls -Zd /mnt system_u:object_r:ramfs_t:s0 /mnt See also: https://lore.kernel.org/selinux/20210105142148.GA3200@redhat.com/T/ https://github.com/fedora-selinux/selinux-policy/pull/478 Cc: Vivek Goyal Signed-off-by: Ondrej Mosnacek Signed-off-by: Paul Moore --- security/selinux/hooks.c | 77 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 52 insertions(+), 25 deletions(-) (limited to 'security/selinux/hooks.c') diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 7fb7ff03eaa9..f2b272c9eaf3 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -484,6 +484,55 @@ static int selinux_is_sblabel_mnt(struct super_block *sb) } } +static int sb_check_xattr_support(struct super_block *sb) +{ + struct superblock_security_struct *sbsec = sb->s_security; + struct dentry *root = sb->s_root; + struct inode *root_inode = d_backing_inode(root); + u32 sid; + int rc; + + /* + * Make sure that the xattr handler exists and that no + * error other than -ENODATA is returned by getxattr on + * the root directory. -ENODATA is ok, as this may be + * the first boot of the SELinux kernel before we have + * assigned xattr values to the filesystem. + */ + if (!(root_inode->i_opflags & IOP_XATTR)) { + pr_warn("SELinux: (dev %s, type %s) has no xattr support\n", + sb->s_id, sb->s_type->name); + goto fallback; + } + + rc = __vfs_getxattr(root, root_inode, XATTR_NAME_SELINUX, NULL, 0); + if (rc < 0 && rc != -ENODATA) { + if (rc == -EOPNOTSUPP) { + pr_warn("SELinux: (dev %s, type %s) has no security xattr handler\n", + sb->s_id, sb->s_type->name); + goto fallback; + } else { + pr_warn("SELinux: (dev %s, type %s) getxattr errno %d\n", + sb->s_id, sb->s_type->name, -rc); + return rc; + } + } + return 0; + +fallback: + /* No xattr support - try to fallback to genfs if possible. */ + rc = security_genfs_sid(&selinux_state, sb->s_type->name, "/", + SECCLASS_DIR, &sid); + if (rc) + return -EOPNOTSUPP; + + pr_warn("SELinux: (dev %s, type %s) falling back to genfs\n", + sb->s_id, sb->s_type->name); + sbsec->behavior = SECURITY_FS_USE_GENFS; + sbsec->sid = sid; + return 0; +} + static int sb_finish_set_opts(struct super_block *sb) { struct superblock_security_struct *sbsec = sb->s_security; @@ -492,30 +541,9 @@ static int sb_finish_set_opts(struct super_block *sb) int rc = 0; if (sbsec->behavior == SECURITY_FS_USE_XATTR) { - /* Make sure that the xattr handler exists and that no - error other than -ENODATA is returned by getxattr on - the root directory. -ENODATA is ok, as this may be - the first boot of the SELinux kernel before we have - assigned xattr values to the filesystem. */ - if (!(root_inode->i_opflags & IOP_XATTR)) { - pr_warn("SELinux: (dev %s, type %s) has no " - "xattr support\n", sb->s_id, sb->s_type->name); - rc = -EOPNOTSUPP; - goto out; - } - - rc = __vfs_getxattr(root, root_inode, XATTR_NAME_SELINUX, NULL, 0); - if (rc < 0 && rc != -ENODATA) { - if (rc == -EOPNOTSUPP) - pr_warn("SELinux: (dev %s, type " - "%s) has no security xattr handler\n", - sb->s_id, sb->s_type->name); - else - pr_warn("SELinux: (dev %s, type " - "%s) getxattr errno %d\n", sb->s_id, - sb->s_type->name, -rc); - goto out; - } + rc = sb_check_xattr_support(sb); + if (rc) + return rc; } sbsec->flags |= SE_SBINITIALIZED; @@ -554,7 +582,6 @@ static int sb_finish_set_opts(struct super_block *sb) spin_lock(&sbsec->isec_lock); } spin_unlock(&sbsec->isec_lock); -out: return rc; } -- cgit v1.2.3 From 29cd6591ab6fee3125ea5c1bf350f5013bc615e1 Mon Sep 17 00:00:00 2001 From: Daniel Colascione Date: Fri, 8 Jan 2021 14:22:22 -0800 Subject: selinux: teach SELinux about anonymous inodes This change uses the anon_inodes and LSM infrastructure introduced in the previous patches to give SELinux the ability to control anonymous-inode files that are created using the new anon_inode_getfd_secure() function. A SELinux policy author detects and controls these anonymous inodes by adding a name-based type_transition rule that assigns a new security type to anonymous-inode files created in some domain. The name used for the name-based transition is the name associated with the anonymous inode for file listings --- e.g., "[userfaultfd]" or "[perf_event]". Example: type uffd_t; type_transition sysadm_t sysadm_t : anon_inode uffd_t "[userfaultfd]"; allow sysadm_t uffd_t:anon_inode { create }; (The next patch in this series is necessary for making userfaultfd support this new interface. The example above is just for exposition.) Signed-off-by: Daniel Colascione Signed-off-by: Lokesh Gidra Signed-off-by: Paul Moore --- security/selinux/hooks.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'security/selinux/hooks.c') diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index f2b272c9eaf3..af2994adf9dd 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2962,6 +2962,62 @@ static int selinux_inode_init_security(struct inode *inode, struct inode *dir, return 0; } +static int selinux_inode_init_security_anon(struct inode *inode, + const struct qstr *name, + const struct inode *context_inode) +{ + const struct task_security_struct *tsec = selinux_cred(current_cred()); + struct common_audit_data ad; + struct inode_security_struct *isec; + int rc; + + if (unlikely(!selinux_initialized(&selinux_state))) + return 0; + + isec = selinux_inode(inode); + + /* + * We only get here once per ephemeral inode. The inode has + * been initialized via inode_alloc_security but is otherwise + * untouched. + */ + + if (context_inode) { + struct inode_security_struct *context_isec = + selinux_inode(context_inode); + if (context_isec->initialized != LABEL_INITIALIZED) { + pr_err("SELinux: context_inode is not initialized"); + return -EACCES; + } + + isec->sclass = context_isec->sclass; + isec->sid = context_isec->sid; + } else { + isec->sclass = SECCLASS_ANON_INODE; + rc = security_transition_sid( + &selinux_state, tsec->sid, tsec->sid, + isec->sclass, name, &isec->sid); + if (rc) + return rc; + } + + isec->initialized = LABEL_INITIALIZED; + /* + * Now that we've initialized security, check whether we're + * allowed to actually create this type of anonymous inode. + */ + + ad.type = LSM_AUDIT_DATA_INODE; + ad.u.inode = inode; + + return avc_has_perm(&selinux_state, + tsec->sid, + isec->sid, + isec->sclass, + FILE__CREATE, + &ad); +} + static int selinux_inode_create(struct inode *dir, struct dentry *dentry, umode_t mode) { return may_create(dir, dentry, SECCLASS_FILE); @@ -7032,6 +7088,7 @@ static struct security_hook_list selinux_hooks[] __lsm_ro_after_init = { LSM_HOOK_INIT(inode_free_security, selinux_inode_free_security), LSM_HOOK_INIT(inode_init_security, selinux_inode_init_security), + LSM_HOOK_INIT(inode_init_security_anon, selinux_inode_init_security_anon), LSM_HOOK_INIT(inode_create, selinux_inode_create), LSM_HOOK_INIT(inode_link, selinux_inode_link), LSM_HOOK_INIT(inode_unlink, selinux_inode_unlink), -- cgit v1.2.3