From 6584cb8825e4c74915a5a13756b1902523391d78 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 6 Jul 2011 11:18:33 +0200 Subject: ARM i.MX dma: Fix burstsize settings dmaengine expects the maxburst parameter in words, not bytes. The imxdma driver and its users do this wrong. Fix this. As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work with imx-dma. This broke the driver with imx-sdma support which correctly takes the maxburst parameter in words. This patch puts the sdma based sound back to work. Signed-off-by: Sascha Hauer --- sound/soc/imx/imx-pcm-dma-mx2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound/soc/imx') diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c index aab7765f401a..b2ed764fd896 100644 --- a/sound/soc/imx/imx-pcm-dma-mx2.c +++ b/sound/soc/imx/imx-pcm-dma-mx2.c @@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream, slave_config.direction = DMA_TO_DEVICE; slave_config.dst_addr = dma_params->dma_addr; slave_config.dst_addr_width = buswidth; - slave_config.dst_maxburst = dma_params->burstsize * buswidth; + slave_config.dst_maxburst = dma_params->burstsize; } else { slave_config.direction = DMA_FROM_DEVICE; slave_config.src_addr = dma_params->dma_addr; slave_config.src_addr_width = buswidth; - slave_config.src_maxburst = dma_params->burstsize * buswidth; + slave_config.src_maxburst = dma_params->burstsize; } ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config); -- cgit v1.2.3