From d30e5d897c3da7c2d17c8112331b66ed953eec78 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 28 May 2010 04:42:59 +0200
Subject: [ARM] pxa/spitz: Correctly register WM8750
This patch registers the WM8750 codec on a proper place on the SPITZ machine
after the WM8750 driver was converted to new API.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
sound/soc/pxa/spitz.c | 36 ------------------------------------
1 file changed, 36 deletions(-)
(limited to 'sound/soc')
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 1941a357e8c4..d256f5f313b5 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
.codec_dev = &soc_codec_dev_wm8750,
};
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct platform_device *spitz_snd_device;
static int __init spitz_init(void)
@@ -369,10 +337,6 @@ static int __init spitz_init(void)
if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
return -ENODEV;
- ret = wm8750_i2c_setup();
- if (ret != 0)
- return ret;
-
spitz_snd_device = platform_device_alloc("soc-audio", -1);
if (!spitz_snd_device)
return -ENOMEM;
--
cgit v1.2.3