From 9e9b594661e8dee54955607277c937c3ff3a5f01 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Jul 2012 08:11:43 +0200 Subject: ALSA: usb-audio: Fix the first PCM interface assignment In the new PCM streaming logic, the interface number is assigned to usb stream instance (subs->interface) after the format and rate setups are succeeded, but some codes are still passing subs->interface as the reference to helper functions. This leads to initializing with an invalid iface number (-1). This patch replaces the wrong references with the ones from the target fmt correctly. Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 54607f8c4f66..f0ede134a111 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -387,7 +387,7 @@ add_sync_ep: subs->data_endpoint->sync_master = subs->sync_endpoint; } - if ((err = snd_usb_init_pitch(subs->stream->chip, subs->interface, alts, fmt)) < 0) + if ((err = snd_usb_init_pitch(subs->stream->chip, fmt->iface, alts, fmt)) < 0) return err; subs->cur_audiofmt = fmt; @@ -450,7 +450,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, struct usb_interface *iface; iface = usb_ifnum_to_if(subs->dev, fmt->iface); alts = &iface->altsetting[fmt->altset_idx]; - ret = snd_usb_init_sample_rate(subs->stream->chip, subs->interface, alts, fmt, rate); + ret = snd_usb_init_sample_rate(subs->stream->chip, fmt->iface, alts, fmt, rate); if (ret < 0) return ret; subs->cur_rate = rate; -- cgit v1.2.3 From 68e67f40b7343383517c3f951b4b8db7626406bc Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 12 Jul 2012 13:08:40 +0200 Subject: ALSA: snd-usb: move calls to usb_set_interface The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams. Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected. Signed-off-by: Daniel Mack Reported-and-tested-by: Philipp Dreimann Reported-by: Joseph Salisbury Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 73 +++++----------------------------------------------- sound/usb/pcm.c | 57 ++++++++++++++++++++++++---------------- 2 files changed, 41 insertions(+), 89 deletions(-) (limited to 'sound') diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index e6906901debb..0f647d22cb4a 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -414,7 +414,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, { struct list_head *p; struct snd_usb_endpoint *ep; - int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK; + int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK; mutex_lock(&chip->mutex); @@ -434,16 +434,6 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync", ep_num); - /* select the alt setting once so the endpoints become valid */ - ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber, - alts->desc.bAlternateSetting); - if (ret < 0) { - snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n", - __func__, ret); - ep = NULL; - goto __exit_unlock; - } - ep = kzalloc(sizeof(*ep), GFP_KERNEL); if (!ep) goto __exit_unlock; @@ -831,9 +821,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) if (++ep->use_count != 1) return 0; - if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags))) - return -EINVAL; - /* just to be sure */ deactivate_urbs(ep, 0, 1); wait_clear_urbs(ep); @@ -911,9 +898,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, if (snd_BUG_ON(ep->use_count == 0)) return; - if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags))) - return; - if (--ep->use_count == 0) { deactivate_urbs(ep, force, can_sleep); ep->data_subs = NULL; @@ -926,42 +910,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, } } -/** - * snd_usb_endpoint_activate: activate an snd_usb_endpoint - * - * @ep: the endpoint to activate - * - * If the endpoint is not currently in use, this functions will select the - * correct alternate interface setting for the interface of this endpoint. - * - * In case of any active users, this functions does nothing. - * - * Returns an error if usb_set_interface() failed, 0 in all other - * cases. - */ -int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep) -{ - if (ep->use_count != 0) - return 0; - - if (!ep->chip->shutdown && - !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) { - int ret; - - ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx); - if (ret < 0) { - snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n", - __func__, ret); - clear_bit(EP_FLAG_ACTIVATED, &ep->flags); - return ret; - } - - return 0; - } - - return -EBUSY; -} - /** * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint * @@ -980,24 +928,15 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep) if (!ep) return -EINVAL; + deactivate_urbs(ep, 1, 1); + wait_clear_urbs(ep); + if (ep->use_count != 0) return 0; - if (!ep->chip->shutdown && - test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) { - int ret; - - ret = usb_set_interface(ep->chip->dev, ep->iface, 0); - if (ret < 0) { - snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n", - __func__, ret); - return ret; - } + clear_bit(EP_FLAG_ACTIVATED, &ep->flags); - return 0; - } - - return -EBUSY; + return 0; } /** diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index f0ede134a111..a1298f379428 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -261,19 +261,6 @@ static void stop_endpoints(struct snd_usb_substream *subs, force, can_sleep, wait); } -static int activate_endpoints(struct snd_usb_substream *subs) -{ - if (subs->sync_endpoint) { - int ret; - - ret = snd_usb_endpoint_activate(subs->sync_endpoint); - if (ret < 0) - return ret; - } - - return snd_usb_endpoint_activate(subs->data_endpoint); -} - static int deactivate_endpoints(struct snd_usb_substream *subs) { int reta, retb; @@ -314,6 +301,33 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) if (fmt == subs->cur_audiofmt) return 0; + /* close the old interface */ + if (subs->interface >= 0 && subs->interface != fmt->iface) { + err = usb_set_interface(subs->dev, subs->interface, 0); + if (err < 0) { + snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n", + dev->devnum, fmt->iface, fmt->altsetting, err); + return -EIO; + } + subs->interface = -1; + subs->altset_idx = 0; + } + + /* set interface */ + if (subs->interface != fmt->iface || + subs->altset_idx != fmt->altset_idx) { + err = usb_set_interface(dev, fmt->iface, fmt->altsetting); + if (err < 0) { + snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n", + dev->devnum, fmt->iface, fmt->altsetting, err); + return -EIO; + } + snd_printdd(KERN_INFO "setting usb interface %d:%d\n", + fmt->iface, fmt->altsetting); + subs->interface = fmt->iface; + subs->altset_idx = fmt->altset_idx; + } + subs->data_endpoint = snd_usb_add_endpoint(subs->stream->chip, alts, fmt->endpoint, subs->direction, SND_USB_ENDPOINT_TYPE_DATA); @@ -460,12 +474,6 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, mutex_lock(&subs->stream->chip->shutdown_mutex); /* format changed */ stop_endpoints(subs, 0, 0, 0); - deactivate_endpoints(subs); - - ret = activate_endpoints(subs); - if (ret < 0) - goto unlock; - ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt, subs->sync_endpoint); if (ret < 0) @@ -500,6 +508,7 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream) subs->period_bytes = 0; mutex_lock(&subs->stream->chip->shutdown_mutex); stop_endpoints(subs, 0, 1, 1); + deactivate_endpoints(subs); mutex_unlock(&subs->stream->chip->shutdown_mutex); return snd_pcm_lib_free_vmalloc_buffer(substream); } @@ -938,16 +947,20 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream, int direction) static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction) { - int ret; struct snd_usb_stream *as = snd_pcm_substream_chip(substream); struct snd_usb_substream *subs = &as->substream[direction]; stop_endpoints(subs, 0, 0, 0); - ret = deactivate_endpoints(subs); + + if (!as->chip->shutdown && subs->interface >= 0) { + usb_set_interface(subs->dev, subs->interface, 0); + subs->interface = -1; + } + subs->pcm_substream = NULL; snd_usb_autosuspend(subs->stream->chip); - return ret; + return 0; } /* Since a URB can handle only a single linear buffer, we must use double -- cgit v1.2.3