From 235528072f28b3b0a1446279b7eaddda36dbf743 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Winiarski?= Date: Thu, 13 Jan 2022 00:36:57 +0100 Subject: kunit: tool: Import missing importlib.abc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Python 3.10.0 contains: 9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)") It causes importlib.util to no longer import importlib.abs, which leads to the following error when trying to use kunit with qemu: AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'? Add the missing import. Signed-off-by: Michał Winiarski Reviewed-by: Daniel Latypov Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- tools/testing/kunit/kunit_kernel.py | 1 + 1 file changed, 1 insertion(+) (limited to 'tools/testing') diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 44bbe54f25f1..3c4196cef3ed 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -6,6 +6,7 @@ # Author: Felix Guo # Author: Brendan Higgins +import importlib.abc import importlib.util import logging import subprocess -- cgit v1.2.3 From f034cc1301e7d83d4ec428dd6b8ffb57ca446efb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= Date: Wed, 12 Jan 2022 14:41:42 -0500 Subject: selftests: rtc: Increase test timeout so that all tests run MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado Acked-by: Alexandre Belloni Signed-off-by: Shuah Khan --- tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6..a953c96aa16e 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- cgit v1.2.3 From 40d70d4d60974c28054a60316f2aec8810833526 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= Date: Fri, 14 Jan 2022 18:21:26 -0500 Subject: selftests: cpufreq: Write test output to stdout as well MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use 'tee' to send the test output to stdout in addition to the current output file. This makes the output easier to handle in automated test systems and is superior to only later dumping the output file contents to stdout, since this way the test output can be interleaved with other log messages, like from the kernel, so that chronology is preserved, making it easier to detect issues. Signed-off-by: Nícolas F. R. A. Prado Acked-by: Viresh Kumar Signed-off-by: Shuah Khan --- tools/testing/selftests/cpufreq/main.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/cpufreq/main.sh b/tools/testing/selftests/cpufreq/main.sh index 31f8c9a76c5f..60ce18ed0666 100755 --- a/tools/testing/selftests/cpufreq/main.sh +++ b/tools/testing/selftests/cpufreq/main.sh @@ -194,5 +194,5 @@ prerequisite # Run requested functions clear_dumps $OUTFILE -do_test >> $OUTFILE.txt +do_test | tee -a $OUTFILE.txt dmesg_dumps $OUTFILE -- cgit v1.2.3 From 92d25637a3a45904292c93f1863c6bbda4e3e38f Mon Sep 17 00:00:00 2001 From: Li Zhijian Date: Fri, 17 Dec 2021 17:29:55 +0800 Subject: kselftest: signal all child processes We have some many cases that will create child process as well, such as pidfd_wait. Previously, we will signal/kill the parent process when it is time out, but this signal will not be sent to its child process. In such case, if child process doesn't terminate itself, ksefltest framework will hang forever. Here we group all its child processes so that kill() can signal all of them in timeout. Fixed change log: Shuah Khan Suggested-by: yang xu Signed-off-by: Li Zhijian Acked-by: Christian Brauner Signed-off-by: Shuah Khan --- tools/testing/selftests/kselftest_harness.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 471eaa7b3a3f..11779405dc80 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -877,7 +877,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext) } t->timed_out = true; - kill(t->pid, SIGKILL); + // signal process group + kill(-(t->pid), SIGKILL); } void __wait_for_test(struct __test_metadata *t) @@ -987,6 +988,7 @@ void __run_test(struct __fixture_metadata *f, ksft_print_msg("ERROR SPAWNING TEST CHILD\n"); t->passed = 0; } else if (t->pid == 0) { + setpgrp(); t->fn(t, variant); if (t->skip) _exit(255); -- cgit v1.2.3 From e2bcbd7769ee8f05e1b3d10848aace98973844e4 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Mon, 24 Jan 2022 15:30:28 +0000 Subject: tools headers UAPI: remove stale lirc.h The lirc.h file is an old copy of lirc.h from the kernel sources. It is out of date, and the bpf lirc tests don't need a new copy anyway. As long as /usr/include/linux/lirc.h is from kernel v5.2 or newer, the tests will compile fine. Signed-off-by: Sean Young Reviewed-by: Shuah Khan Link: https://lore.kernel.org/r/20220124153028.394409-1-sean@mess.org Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/test_lirc_mode2_user.c | 1 - 1 file changed, 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/bpf/test_lirc_mode2_user.c b/tools/testing/selftests/bpf/test_lirc_mode2_user.c index ebf68dce5504..2893e9f2f1e0 100644 --- a/tools/testing/selftests/bpf/test_lirc_mode2_user.c +++ b/tools/testing/selftests/bpf/test_lirc_mode2_user.c @@ -28,7 +28,6 @@ // 5. We can read keycode from same /dev/lirc device #include -#include #include #include #include -- cgit v1.2.3 From c858620d2ae3489409af593f005a48a8a324da3d Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 23 Jan 2022 15:45:54 +0100 Subject: selftests: netfilter: reduce zone stress test running time This selftests needs almost 3 minutes to complete, reduce the insertes zones to 1000. Test now completes in about 20 seconds. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_zones_many.sh | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/netfilter/nft_zones_many.sh b/tools/testing/selftests/netfilter/nft_zones_many.sh index 04633119b29a..5a8db0b48928 100755 --- a/tools/testing/selftests/netfilter/nft_zones_many.sh +++ b/tools/testing/selftests/netfilter/nft_zones_many.sh @@ -9,7 +9,7 @@ ns="ns-$sfx" # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 -zones=20000 +zones=2000 have_ct_tool=0 ret=0 @@ -75,10 +75,10 @@ EOF while [ $i -lt $max_zones ]; do local start=$(date +%s%3N) - i=$((i + 10000)) + i=$((i + 1000)) j=$((j + 1)) # nft rule in output places each packet in a different zone. - dd if=/dev/zero of=/dev/stdout bs=8k count=10000 2>/dev/null | ip netns exec "$ns" socat STDIN UDP:127.0.0.1:12345,sourceport=12345 + dd if=/dev/zero of=/dev/stdout bs=8k count=1000 2>/dev/null | ip netns exec "$ns" socat STDIN UDP:127.0.0.1:12345,sourceport=12345 if [ $? -ne 0 ] ;then ret=1 break @@ -86,7 +86,7 @@ EOF stop=$(date +%s%3N) local duration=$((stop-start)) - echo "PASS: added 10000 entries in $duration ms (now $i total, loop $j)" + echo "PASS: added 1000 entries in $duration ms (now $i total, loop $j)" done if [ $have_ct_tool -eq 1 ]; then @@ -128,11 +128,11 @@ test_conntrack_tool() { break fi - if [ $((i%10000)) -eq 0 ];then + if [ $((i%1000)) -eq 0 ];then stop=$(date +%s%3N) local duration=$((stop-start)) - echo "PASS: added 10000 entries in $duration ms (now $i total)" + echo "PASS: added 1000 entries in $duration ms (now $i total)" start=$stop fi done -- cgit v1.2.3 From aad51ca71ad83273e8826d6cfdcf53c98748d1fa Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 24 Jan 2022 22:09:15 +0100 Subject: selftests: netfilter: check stateless nat udp checksum fixup Add a test that sends large udp packet (which is fragmented) via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4' and check that the datagram is received by peer. On kernels without commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")', this will fail with: cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty -rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS -rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF ERROR: in and output file mismatch when checking udp with stateless nat FAIL: nftables v1.0.0 (Fearless Fosdick #2) On patched kernels, this will show: PASS: IP statless for ns2-PFp89amx Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_nat.sh | 152 +++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) (limited to 'tools/testing') diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index 349a319a9e51..79fe627b9e81 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -899,6 +899,144 @@ EOF ip netns exec "$ns0" nft delete table $family nat } +test_stateless_nat_ip() +{ + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules" + return 1 + fi + +ip netns exec "$ns0" nft -f /dev/stdin < /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules" + lret=1 + fi + + # ns1 should have seen packets from .2.2, due to stateless rewrite. + expect="packets 1 bytes 84" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 1" + lret=1 + fi + + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3" + lret=1 + fi + + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4" + lret=1 + fi + done + + reset_counters + + socat -h > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: Could not run stateless nat frag test without socat tool" + if [ $lret -eq 0 ]; then + return $ksft_skip + fi + + ip netns exec "$ns0" nft delete table ip stateless + return $lret + fi + + local tmpfile=$(mktemp) + dd if=/dev/urandom of=$tmpfile bs=4096 count=1 2>/dev/null + + local outfile=$(mktemp) + ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:$outfile < /dev/null & + sc_r=$! + + sleep 1 + # re-do with large ping -> ip fragmentation + ip netns exec "$ns2" timeout 3 socat - UDP4-SENDTO:"10.0.1.99:4233" < "$tmpfile" > /dev/null + if [ $? -ne 0 ] ; then + echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2 + lret=1 + fi + + wait + + cmp "$tmpfile" "$outfile" + if [ $? -ne 0 ]; then + ls -l "$tmpfile" "$outfile" + echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2 + lret=1 + fi + + rm -f "$tmpfile" "$outfile" + + # ns1 should have seen packets from 2.2, due to stateless rewrite. + expect="packets 3 bytes 4164" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 5" + lret=1 + fi + + ip netns exec "$ns0" nft delete table ip stateless + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete table ip stateless" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP statless for $ns2" + + return $lret +} + # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 for i in 0 1 2; do ip netns exec ns$i-$sfx nft -f /dev/stdin < Date: Wed, 26 Jan 2022 12:54:54 +0100 Subject: selftests: nft_concat_range: add test for reload with no element add/del Add a specific test for the reload issue fixed with commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone"). Add to set, then flush set content + restore without other add/remove in the transaction. On kernels before the fix, this test case fails: net,mac with reload [FAIL] Signed-off-by: Florian Westphal Reviewed-by: Stefano Brivio Signed-off-by: Pablo Neira Ayuso --- .../selftests/netfilter/nft_concat_range.sh | 72 +++++++++++++++++++++- 1 file changed, 71 insertions(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/netfilter/nft_concat_range.sh b/tools/testing/selftests/netfilter/nft_concat_range.sh index ed61f6cab60f..df322e47a54f 100755 --- a/tools/testing/selftests/netfilter/nft_concat_range.sh +++ b/tools/testing/selftests/netfilter/nft_concat_range.sh @@ -27,7 +27,7 @@ TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto net6_port_net6_port net_port_mac_proto_net" # Reported bugs, also described by TYPE_ variables below -BUGS="flush_remove_add" +BUGS="flush_remove_add reload" # List of possible paths to pktgen script from kernel tree for performance tests PKTGEN_SCRIPT_PATHS=" @@ -354,6 +354,23 @@ TYPE_flush_remove_add=" display Add two elements, flush, re-add " +TYPE_reload=" +display net,mac with reload +type_spec ipv4_addr . ether_addr +chain_spec ip daddr . ether saddr +dst addr4 +src mac +start 1 +count 1 +src_delta 2000 +tools sendip nc bash +proto udp + +race_repeat 0 + +perf_duration 0 +" + # Set template for all tests, types and rules are filled in depending on test set_template=' flush ruleset @@ -1473,6 +1490,59 @@ test_bug_flush_remove_add() { nft flush ruleset } +# - add ranged element, check that packets match it +# - reload the set, check packets still match +test_bug_reload() { + setup veth send_"${proto}" set || return ${KSELFTEST_SKIP} + rstart=${start} + + range_size=1 + for i in $(seq "${start}" $((start + count))); do + end=$((start + range_size)) + + # Avoid negative or zero-sized port ranges + if [ $((end / 65534)) -gt $((start / 65534)) ]; then + start=${end} + end=$((end + 1)) + fi + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" || return 1 + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + # check kernel does allocate pcpu sctrach map + # for reload with no elemet add/delete + ( echo flush set inet filter test ; + nft list set inet filter test ) | nft -f - + + start=${rstart} + range_size=1 + + for i in $(seq "${start}" $((start + count))); do + end=$((start + range_size)) + + # Avoid negative or zero-sized port ranges + if [ $((end / 65534)) -gt $((start / 65534)) ]; then + start=${end} + end=$((end + 1)) + fi + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do + send_match "${j}" $((j + src_delta)) || return 1 + done + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + nft flush ruleset +} + test_reported_issues() { eval test_bug_"${subtest}" } -- cgit v1.2.3 From fc4eb486a59d70bd35cf1209f0e68c2d8b979193 Mon Sep 17 00:00:00 2001 From: Yang Xu Date: Thu, 27 Jan 2022 17:11:35 +0800 Subject: selftests/zram: Skip max_comp_streams interface on newer kernel Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'tools/testing') diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd1..f47fc0f27e99 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -11,6 +11,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,6 +28,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -86,6 +103,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- cgit v1.2.3 From d18da7ec3719559d6e74937266d0416e6c7e0b31 Mon Sep 17 00:00:00 2001 From: Yang Xu Date: Thu, 27 Jan 2022 17:11:36 +0800 Subject: selftests/zram01.sh: Fix compression ratio calculation zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan --- tools/testing/selftests/zram/zram01.sh | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb87..e9e9eb777e2c 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,8 +33,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- cgit v1.2.3 From 01dabed20573804750af5c7bf8d1598a6bf7bf6e Mon Sep 17 00:00:00 2001 From: Yang Xu Date: Thu, 27 Jan 2022 17:11:37 +0800 Subject: selftests/zram: Adapt the situation that /dev/zram0 is being used If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan --- tools/testing/selftests/zram/zram.sh | 15 +---- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 ++++++++++++++++++------------- 4 files changed, 66 insertions(+), 63 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec454..b0b91d9b0dc2 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c..8f4affe34f3e 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c0..2418b0c4ed13 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99..21ec1966de76 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev # Modified: Naresh Kamboju -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- cgit v1.2.3 From 908a26e139e8cf21093acc56d8e90ddad2ad1eff Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Thu, 27 Jan 2022 21:33:45 +0500 Subject: selftests/exec: Remove pipe from TEST_GEN_FILES pipe named FIFO special file is being created in execveat.c to perform some tests. Makefile doesn't need to do anything with the pipe. When it isn't found, Makefile generates the following build error: make: *** No rule to make target '../tools/testing/selftests/exec/pipe', needed by 'all'. Stop. pipe is created and removed during test run-time. Amended change log to add pipe remove info: Shuah Khan Fixes: 61016db15b8e ("selftests/exec: Verify execve of non-regular files fail") Signed-off-by: Muhammad Usama Anjum Reviewed-by: Shuah Khan Signed-off-by: Shuah Khan --- tools/testing/selftests/exec/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index dd61118df66e..12c5e27d32c1 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -5,7 +5,7 @@ CFLAGS += -D_GNU_SOURCE TEST_PROGS := binfmt_script non-regular TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 -TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir pipe +TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir # Makefile is a run-time dependency, since it's accessed by the execveat test TEST_FILES := Makefile -- cgit v1.2.3 From b9199181a9ef8252e47e207be8c23e1f50662620 Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Thu, 27 Jan 2022 22:44:46 +0500 Subject: selftests: futex: Use variable MAKE instead of make MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Muhammad Usama Anjum Reviewed-by: André Almeida Signed-off-by: Shuah Khan --- tools/testing/selftests/futex/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/futex/Makefile b/tools/testing/selftests/futex/Makefile index 12631f0076a1..11e157d7533b 100644 --- a/tools/testing/selftests/futex/Makefile +++ b/tools/testing/selftests/futex/Makefile @@ -11,7 +11,7 @@ all: @for DIR in $(SUBDIRS); do \ BUILD_TARGET=$(OUTPUT)/$$DIR; \ mkdir $$BUILD_TARGET -p; \ - make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ + $(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ if [ -e $$DIR/$(TEST_PROGS) ]; then \ rsync -a $$DIR/$(TEST_PROGS) $$BUILD_TARGET/; \ fi \ @@ -32,6 +32,6 @@ override define CLEAN @for DIR in $(SUBDIRS); do \ BUILD_TARGET=$(OUTPUT)/$$DIR; \ mkdir $$BUILD_TARGET -p; \ - make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ + $(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ done endef -- cgit v1.2.3 From e051cdf655fa016692008a446a060eff06222bb5 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Wed, 26 Jan 2022 10:27:21 +0000 Subject: selftests: openat2: Print also errno in failure messages In E_func() macro, on error, print also errno in order to aid debugging. Cc: Aleksa Sarai Signed-off-by: Cristian Marussi Signed-off-by: Shuah Khan --- tools/testing/selftests/openat2/helpers.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h index a6ea27344db2..ad5d0ba5b6ce 100644 --- a/tools/testing/selftests/openat2/helpers.h +++ b/tools/testing/selftests/openat2/helpers.h @@ -62,11 +62,12 @@ bool needs_openat2(const struct open_how *how); (similar to chroot(2)). */ #endif /* RESOLVE_IN_ROOT */ -#define E_func(func, ...) \ - do { \ - if (func(__VA_ARGS__) < 0) \ - ksft_exit_fail_msg("%s:%d %s failed\n", \ - __FILE__, __LINE__, #func);\ +#define E_func(func, ...) \ + do { \ + errno = 0; \ + if (func(__VA_ARGS__) < 0) \ + ksft_exit_fail_msg("%s:%d %s failed - errno:%d\n", \ + __FILE__, __LINE__, #func, errno); \ } while (0) #define E_asprintf(...) E_func(asprintf, __VA_ARGS__) -- cgit v1.2.3 From ea3396725aa143dd42fe388cb67e44c90d2fb719 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Wed, 26 Jan 2022 10:27:22 +0000 Subject: selftests: openat2: Add missing dependency in Makefile Add a dependency on header helpers.h to the main target; while at that add to helpers.h also a missing include for bool types. Cc: Aleksa Sarai Signed-off-by: Cristian Marussi Signed-off-by: Shuah Khan --- tools/testing/selftests/openat2/Makefile | 2 +- tools/testing/selftests/openat2/helpers.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/openat2/Makefile b/tools/testing/selftests/openat2/Makefile index 4b93b1417b86..843ba56d8e49 100644 --- a/tools/testing/selftests/openat2/Makefile +++ b/tools/testing/selftests/openat2/Makefile @@ -5,4 +5,4 @@ TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test include ../lib.mk -$(TEST_GEN_PROGS): helpers.c +$(TEST_GEN_PROGS): helpers.c helpers.h diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h index ad5d0ba5b6ce..7056340b9339 100644 --- a/tools/testing/selftests/openat2/helpers.h +++ b/tools/testing/selftests/openat2/helpers.h @@ -9,6 +9,7 @@ #define _GNU_SOURCE #include +#include #include #include #include "../kselftest.h" -- cgit v1.2.3 From ac9e0a250bb155078601a5b999aab05f2a04d1ab Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Wed, 26 Jan 2022 10:27:23 +0000 Subject: selftests: openat2: Skip testcases that fail with EOPNOTSUPP Skip testcases that fail since the requested valid flags combination is not supported by the underlying filesystem. Cc: Aleksa Sarai Signed-off-by: Cristian Marussi Signed-off-by: Shuah Khan --- tools/testing/selftests/openat2/openat2_test.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c index 1bddbe934204..7fb902099de4 100644 --- a/tools/testing/selftests/openat2/openat2_test.c +++ b/tools/testing/selftests/openat2/openat2_test.c @@ -259,6 +259,16 @@ void test_openat2_flags(void) unlink(path); fd = sys_openat2(AT_FDCWD, path, &test->how); + if (fd < 0 && fd == -EOPNOTSUPP) { + /* + * Skip the testcase if it failed because not supported + * by FS. (e.g. a valid O_TMPFILE combination on NFS) + */ + ksft_test_result_skip("openat2 with %s fails with %d (%s)\n", + test->name, fd, strerror(-fd)); + goto next; + } + if (test->err >= 0) failed = (fd < 0); else @@ -303,7 +313,7 @@ skip: else resultfn("openat2 with %s fails with %d (%s)\n", test->name, test->err, strerror(-test->err)); - +next: free(fdpath); fflush(stdout); } -- cgit v1.2.3 From dae1d8ac31896988e7313384c0370176a75e9b45 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Wed, 26 Jan 2022 10:27:19 +0000 Subject: selftests: skip mincore.check_file_mmap when fs lacks needed support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying filesystem lacks support of O_TMPFILE or fallocate since such failures are not really related to mincore functionality. Cc: Ricardo Cañuelo Signed-off-by: Cristian Marussi Signed-off-by: Shuah Khan --- tools/testing/selftests/mincore/mincore_selftest.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c index e54106643337..4c88238fc8f0 100644 --- a/tools/testing/selftests/mincore/mincore_selftest.c +++ b/tools/testing/selftests/mincore/mincore_selftest.c @@ -207,15 +207,21 @@ TEST(check_file_mmap) errno = 0; fd = open(".", O_TMPFILE | O_RDWR, 0600); - ASSERT_NE(-1, fd) { - TH_LOG("Can't create temporary file: %s", - strerror(errno)); + if (fd < 0) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Can't create temporary file: %s", + strerror(errno)); + } + SKIP(goto out_free, "O_TMPFILE not supported by filesystem."); } errno = 0; retval = fallocate(fd, 0, 0, FILE_SIZE); - ASSERT_EQ(0, retval) { - TH_LOG("Error allocating space for the temporary file: %s", - strerror(errno)); + if (retval) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Error allocating space for the temporary file: %s", + strerror(errno)); + } + SKIP(goto out_close, "fallocate not supported by filesystem."); } /* @@ -271,7 +277,9 @@ TEST(check_file_mmap) } munmap(addr, FILE_SIZE); +out_close: close(fd); +out_free: free(vec); } -- cgit v1.2.3 From ec049891b2dc16591813eacaddc476b3d27c8c14 Mon Sep 17 00:00:00 2001 From: Vincenzo Frascino Date: Mon, 31 Jan 2022 11:34:05 +0000 Subject: kselftest: Fix vdso_test_abi return status vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan Cc: Andy Lutomirski Cc: Thomas Gleixner Reported-by: Cristian Marussi Signed-off-by: Vincenzo Frascino Signed-off-by: Shuah Khan --- tools/testing/selftests/vDSO/vdso_test_abi.c | 135 ++++++++++++--------------- 1 file changed, 62 insertions(+), 73 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/vDSO/vdso_test_abi.c b/tools/testing/selftests/vDSO/vdso_test_abi.c index 3d603f1394af..883ca85424bc 100644 --- a/tools/testing/selftests/vDSO/vdso_test_abi.c +++ b/tools/testing/selftests/vDSO/vdso_test_abi.c @@ -33,110 +33,114 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts); typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts); typedef time_t (*vdso_time_t)(time_t *t); -static int vdso_test_gettimeofday(void) +#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__ +#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x +#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x + +static void vdso_test_gettimeofday(void) { /* Find gettimeofday. */ vdso_gettimeofday_t vdso_gettimeofday = (vdso_gettimeofday_t)vdso_sym(version, name[0]); if (!vdso_gettimeofday) { - printf("Could not find %s\n", name[0]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0])); + return; } struct timeval tv; long ret = vdso_gettimeofday(&tv, 0); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[0]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0])); } - - return KSFT_PASS; } -static int vdso_test_clock_gettime(clockid_t clk_id) +static void vdso_test_clock_gettime(clockid_t clk_id) { /* Find clock_gettime. */ vdso_clock_gettime_t vdso_clock_gettime = (vdso_clock_gettime_t)vdso_sym(version, name[1]); if (!vdso_clock_gettime) { - printf("Could not find %s\n", name[1]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1])); + return; } struct timespec ts; long ret = vdso_clock_gettime(clk_id, &ts); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[1]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1])); } - - return KSFT_PASS; } -static int vdso_test_time(void) +static void vdso_test_time(void) { /* Find time. */ vdso_time_t vdso_time = (vdso_time_t)vdso_sym(version, name[2]); if (!vdso_time) { - printf("Could not find %s\n", name[2]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2])); + return; } long ret = vdso_time(NULL); if (ret > 0) { - printf("The time in hours since January 1, 1970 is %lld\n", + ksft_print_msg("The time in hours since January 1, 1970 is %lld\n", (long long)(ret / 3600)); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[2]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2])); } - - return KSFT_PASS; } -static int vdso_test_clock_getres(clockid_t clk_id) +static void vdso_test_clock_getres(clockid_t clk_id) { + int clock_getres_fail = 0; + /* Find clock_getres. */ vdso_clock_getres_t vdso_clock_getres = (vdso_clock_getres_t)vdso_sym(version, name[3]); if (!vdso_clock_getres) { - printf("Could not find %s\n", name[3]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3])); + return; } struct timespec ts, sys_ts; long ret = vdso_clock_getres(clk_id, &ts); if (ret == 0) { - printf("The resolution is %lld %lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The vdso resolution is %lld %lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); } else { - printf("%s failed\n", name[3]); - return KSFT_FAIL; + clock_getres_fail++; } ret = syscall(SYS_clock_getres, clk_id, &sys_ts); - if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) { - printf("%s failed\n", name[3]); - return KSFT_FAIL; - } + ksft_print_msg("The syscall resolution is %lld %lld\n", + (long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec); - return KSFT_PASS; + if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) + clock_getres_fail++; + + if (clock_getres_fail > 0) { + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3])); + } else { + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); + } } const char *vdso_clock_name[12] = { @@ -158,36 +162,23 @@ const char *vdso_clock_name[12] = { * This function calls vdso_test_clock_gettime and vdso_test_clock_getres * with different values for clock_id. */ -static inline int vdso_test_clock(clockid_t clock_id) +static inline void vdso_test_clock(clockid_t clock_id) { - int ret0, ret1; - - ret0 = vdso_test_clock_gettime(clock_id); - /* A skipped test is considered passed */ - if (ret0 == KSFT_SKIP) - ret0 = KSFT_PASS; - - ret1 = vdso_test_clock_getres(clock_id); - /* A skipped test is considered passed */ - if (ret1 == KSFT_SKIP) - ret1 = KSFT_PASS; + ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]); - ret0 += ret1; + vdso_test_clock_gettime(clock_id); - printf("clock_id: %s", vdso_clock_name[clock_id]); - - if (ret0 > 0) - printf(" [FAIL]\n"); - else - printf(" [PASS]\n"); - - return ret0; + vdso_test_clock_getres(clock_id); } +#define VDSO_TEST_PLAN 16 + int main(int argc, char **argv) { unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR); - int ret; + + ksft_print_header(); + ksft_set_plan(VDSO_TEST_PLAN); if (!sysinfo_ehdr) { printf("AT_SYSINFO_EHDR is not present!\n"); @@ -201,44 +192,42 @@ int main(int argc, char **argv) vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR)); - ret = vdso_test_gettimeofday(); + vdso_test_gettimeofday(); #if _POSIX_TIMERS > 0 #ifdef CLOCK_REALTIME - ret += vdso_test_clock(CLOCK_REALTIME); + vdso_test_clock(CLOCK_REALTIME); #endif #ifdef CLOCK_BOOTTIME - ret += vdso_test_clock(CLOCK_BOOTTIME); + vdso_test_clock(CLOCK_BOOTTIME); #endif #ifdef CLOCK_TAI - ret += vdso_test_clock(CLOCK_TAI); + vdso_test_clock(CLOCK_TAI); #endif #ifdef CLOCK_REALTIME_COARSE - ret += vdso_test_clock(CLOCK_REALTIME_COARSE); + vdso_test_clock(CLOCK_REALTIME_COARSE); #endif #ifdef CLOCK_MONOTONIC - ret += vdso_test_clock(CLOCK_MONOTONIC); + vdso_test_clock(CLOCK_MONOTONIC); #endif #ifdef CLOCK_MONOTONIC_RAW - ret += vdso_test_clock(CLOCK_MONOTONIC_RAW); + vdso_test_clock(CLOCK_MONOTONIC_RAW); #endif #ifdef CLOCK_MONOTONIC_COARSE - ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE); + vdso_test_clock(CLOCK_MONOTONIC_COARSE); #endif #endif - ret += vdso_test_time(); - - if (ret > 0) - return KSFT_FAIL; + vdso_test_time(); - return KSFT_PASS; + ksft_print_cnts(); + return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL; } -- cgit v1.2.3 From 95d29fa104523b1756323f7003294b1711c27808 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Mon, 31 Jan 2022 11:34:06 +0100 Subject: selftests/perf_events: Test modification of perf_event_attr::sig_data Test that PERF_EVENT_IOC_MODIFY_ATTRIBUTES correctly modifies perf_event_attr::sig_data as well. Signed-off-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Dmitry Vyukov Link: https://lore.kernel.org/r/20220131103407.1971678-2-elver@google.com --- tools/testing/selftests/perf_events/sigtrap_threads.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/perf_events/sigtrap_threads.c b/tools/testing/selftests/perf_events/sigtrap_threads.c index 8e83cf91513a..6d849dc2bee0 100644 --- a/tools/testing/selftests/perf_events/sigtrap_threads.c +++ b/tools/testing/selftests/perf_events/sigtrap_threads.c @@ -44,9 +44,10 @@ static struct { } ctx; /* Unique value to check si_perf_data is correctly set from perf_event_attr::sig_data. */ -#define TEST_SIG_DATA(addr) (~(unsigned long)(addr)) +#define TEST_SIG_DATA(addr, id) (~(unsigned long)(addr) + id) -static struct perf_event_attr make_event_attr(bool enabled, volatile void *addr) +static struct perf_event_attr make_event_attr(bool enabled, volatile void *addr, + unsigned long id) { struct perf_event_attr attr = { .type = PERF_TYPE_BREAKPOINT, @@ -60,7 +61,7 @@ static struct perf_event_attr make_event_attr(bool enabled, volatile void *addr) .inherit_thread = 1, /* ... but only cloned with CLONE_THREAD. */ .remove_on_exec = 1, /* Required by sigtrap. */ .sigtrap = 1, /* Request synchronous SIGTRAP on event. */ - .sig_data = TEST_SIG_DATA(addr), + .sig_data = TEST_SIG_DATA(addr, id), }; return attr; } @@ -110,7 +111,7 @@ FIXTURE(sigtrap_threads) FIXTURE_SETUP(sigtrap_threads) { - struct perf_event_attr attr = make_event_attr(false, &ctx.iterate_on); + struct perf_event_attr attr = make_event_attr(false, &ctx.iterate_on, 0); struct sigaction action = {}; int i; @@ -165,7 +166,7 @@ TEST_F(sigtrap_threads, enable_event) EXPECT_EQ(ctx.tids_want_signal, 0); EXPECT_EQ(ctx.first_siginfo.si_addr, &ctx.iterate_on); EXPECT_EQ(ctx.first_siginfo.si_perf_type, PERF_TYPE_BREAKPOINT); - EXPECT_EQ(ctx.first_siginfo.si_perf_data, TEST_SIG_DATA(&ctx.iterate_on)); + EXPECT_EQ(ctx.first_siginfo.si_perf_data, TEST_SIG_DATA(&ctx.iterate_on, 0)); /* Check enabled for parent. */ ctx.iterate_on = 0; @@ -175,7 +176,7 @@ TEST_F(sigtrap_threads, enable_event) /* Test that modification propagates to all inherited events. */ TEST_F(sigtrap_threads, modify_and_enable_event) { - struct perf_event_attr new_attr = make_event_attr(true, &ctx.iterate_on); + struct perf_event_attr new_attr = make_event_attr(true, &ctx.iterate_on, 42); EXPECT_EQ(ioctl(self->fd, PERF_EVENT_IOC_MODIFY_ATTRIBUTES, &new_attr), 0); run_test_threads(_metadata, self); @@ -184,7 +185,7 @@ TEST_F(sigtrap_threads, modify_and_enable_event) EXPECT_EQ(ctx.tids_want_signal, 0); EXPECT_EQ(ctx.first_siginfo.si_addr, &ctx.iterate_on); EXPECT_EQ(ctx.first_siginfo.si_perf_type, PERF_TYPE_BREAKPOINT); - EXPECT_EQ(ctx.first_siginfo.si_perf_data, TEST_SIG_DATA(&ctx.iterate_on)); + EXPECT_EQ(ctx.first_siginfo.si_perf_data, TEST_SIG_DATA(&ctx.iterate_on, 42)); /* Check enabled for parent. */ ctx.iterate_on = 0; @@ -204,7 +205,7 @@ TEST_F(sigtrap_threads, signal_stress) EXPECT_EQ(ctx.tids_want_signal, 0); EXPECT_EQ(ctx.first_siginfo.si_addr, &ctx.iterate_on); EXPECT_EQ(ctx.first_siginfo.si_perf_type, PERF_TYPE_BREAKPOINT); - EXPECT_EQ(ctx.first_siginfo.si_perf_data, TEST_SIG_DATA(&ctx.iterate_on)); + EXPECT_EQ(ctx.first_siginfo.si_perf_data, TEST_SIG_DATA(&ctx.iterate_on, 0)); } TEST_HARNESS_MAIN -- cgit v1.2.3 From de4d73b16d5d9c3e5d03a66046e5410e1e74f903 Mon Sep 17 00:00:00 2001 From: Daniel Latypov Date: Thu, 27 Jan 2022 14:17:10 -0800 Subject: kunit: fix missing f in f-string in run_checks.py We're missing the `f` prefix to have python do string interpolation, so we'd never end up printing what the actual "unexpected" error is. Fixes: ee92ed38364e ("kunit: add run_checks.py script to validate kunit changes") Signed-off-by: Daniel Latypov Reviewed-by: David Gow Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- tools/testing/kunit/run_checks.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/testing') diff --git a/tools/testing/kunit/run_checks.py b/tools/testing/kunit/run_checks.py index 4f32133ed77c..13d854afca9d 100755 --- a/tools/testing/kunit/run_checks.py +++ b/tools/testing/kunit/run_checks.py @@ -61,7 +61,7 @@ def main(argv: Sequence[str]) -> None: elif isinstance(ex, subprocess.CalledProcessError): print(f'{name}: FAILED') else: - print('{name}: unexpected exception: {ex}') + print(f'{name}: unexpected exception: {ex}') continue output = ex.output -- cgit v1.2.3 From 07d2505b963b2d30f747dce338211f51068b8765 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 3 Feb 2022 20:49:45 -0800 Subject: kselftest/vm: revert "tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner" With this change, userfaultfd fails to build with undefined reference swap() error: userfaultfd.c: In function `userfaultfd_stress': userfaultfd.c:1530:17: warning: implicit declaration of function `swap'; did you mean `swab'? [-Wimplicit-function-declaration] 1530 | swap(area_src, area_dst); | ^~~~ | swab /usr/bin/ld: /tmp/ccDGOAdV.o: in function `userfaultfd_stress': userfaultfd.c:(.text+0x549e): undefined reference to `swap' /usr/bin/ld: userfaultfd.c:(.text+0x54bc): undefined reference to `swap' collect2: error: ld returned 1 exit status Revert the commit to fix the problem. Link: https://lkml.kernel.org/r/20220202003340.87195-1-skhan@linuxfoundation.org Fixes: 2c769ed7137a ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner") Signed-off-by: Shuah Khan Cc: Shuah Khan Cc: Minghao Chi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/testing/selftests/vm/userfaultfd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index d3fd24f9fae8..2f49c9af1b58 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -1417,6 +1417,7 @@ static void userfaultfd_pagemap_test(unsigned int test_pgsize) static int userfaultfd_stress(void) { void *area; + char *tmp_area; unsigned long nr; struct uffdio_register uffdio_register; struct uffd_stats uffd_stats[nr_cpus]; @@ -1527,9 +1528,13 @@ static int userfaultfd_stress(void) count_verify[nr], nr); /* prepare next bounce */ - swap(area_src, area_dst); + tmp_area = area_src; + area_src = area_dst; + area_dst = tmp_area; - swap(area_src_alias, area_dst_alias); + tmp_area = area_src_alias; + area_src_alias = area_dst_alias; + area_dst_alias = tmp_area; uffd_stats_report(uffd_stats, nr_cpus); } -- cgit v1.2.3 From 4cbd93c3c110447adc66cb67c08af21f939ae2d7 Mon Sep 17 00:00:00 2001 From: Axel Rasmussen Date: Thu, 27 Jan 2022 13:29:51 -0800 Subject: pidfd: fix test failure due to stack overflow on some arches When running the pidfd_fdinfo_test on arm64, it fails for me. After some digging, the reason is that the child exits due to SIGBUS, because it overflows the 1024 byte stack we've reserved for it. To fix the issue, increase the stack size to 8192 bytes (this number is somewhat arbitrary, and was arrived at through experimentation -- I kept doubling until the failure no longer occurred). Also, let's make the issue easier to debug. wait_for_pid() returns an ambiguous value: it may return -1 in all of these cases: 1. waitpid() itself returned -1 2. waitpid() returned success, but we found !WIFEXITED(status). 3. The child process exited, but it did so with a -1 exit code. There's no way for the caller to tell the difference. So, at least log which occurred, so the test runner can debug things. While debugging this, I found that we had !WIFEXITED(), because the child exited due to a signal. This seems like a reasonably common case, so also print out whether or not we have WIFSIGNALED(), and the associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing clearly when it occurs. Finally, I'm suspicious of allocating the child's stack on our stack. man clone(2) suggests that the correct way to do this is with mmap(), and in particular by setting MAP_STACK. So, switch to doing it that way instead. Signed-off-by: Axel Rasmussen Acked-by: Christian Brauner Signed-off-by: Shuah Khan --- tools/testing/selftests/pidfd/pidfd.h | 13 ++++++++++--- tools/testing/selftests/pidfd/pidfd_fdinfo_test.c | 22 ++++++++++++++++++---- 2 files changed, 28 insertions(+), 7 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/pidfd/pidfd.h b/tools/testing/selftests/pidfd/pidfd.h index 01f8d3c0cf2c..6922d6417e1c 100644 --- a/tools/testing/selftests/pidfd/pidfd.h +++ b/tools/testing/selftests/pidfd/pidfd.h @@ -68,7 +68,7 @@ #define PIDFD_SKIP 3 #define PIDFD_XFAIL 4 -int wait_for_pid(pid_t pid) +static inline int wait_for_pid(pid_t pid) { int status, ret; @@ -78,13 +78,20 @@ again: if (errno == EINTR) goto again; + ksft_print_msg("waitpid returned -1, errno=%d\n", errno); return -1; } - if (!WIFEXITED(status)) + if (!WIFEXITED(status)) { + ksft_print_msg( + "waitpid !WIFEXITED, WIFSIGNALED=%d, WTERMSIG=%d\n", + WIFSIGNALED(status), WTERMSIG(status)); return -1; + } - return WEXITSTATUS(status); + ret = WEXITSTATUS(status); + ksft_print_msg("waitpid WEXITSTATUS=%d\n", ret); + return ret; } static inline int sys_pidfd_open(pid_t pid, unsigned int flags) diff --git a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c index 22558524f71c..3fd8e903118f 100644 --- a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c +++ b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "pidfd.h" #include "../kselftest.h" @@ -80,7 +81,10 @@ static inline int error_check(struct error *err, const char *test_name) return err->code; } +#define CHILD_STACK_SIZE 8192 + struct child { + char *stack; pid_t pid; int fd; }; @@ -89,17 +93,22 @@ static struct child clone_newns(int (*fn)(void *), void *args, struct error *err) { static int flags = CLONE_PIDFD | CLONE_NEWPID | CLONE_NEWNS | SIGCHLD; - size_t stack_size = 1024; - char *stack[1024] = { 0 }; struct child ret; if (!(flags & CLONE_NEWUSER) && geteuid() != 0) flags |= CLONE_NEWUSER; + ret.stack = mmap(NULL, CHILD_STACK_SIZE, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); + if (ret.stack == MAP_FAILED) { + error_set(err, -1, "mmap of stack failed (errno %d)", errno); + return ret; + } + #ifdef __ia64__ - ret.pid = __clone2(fn, stack, stack_size, flags, args, &ret.fd); + ret.pid = __clone2(fn, ret.stack, CHILD_STACK_SIZE, flags, args, &ret.fd); #else - ret.pid = clone(fn, stack + stack_size, flags, args, &ret.fd); + ret.pid = clone(fn, ret.stack + CHILD_STACK_SIZE, flags, args, &ret.fd); #endif if (ret.pid < 0) { @@ -129,6 +138,11 @@ static inline int child_join(struct child *child, struct error *err) else if (r > 0) error_set(err, r, "child %d reported: %d", child->pid, r); + if (munmap(child->stack, CHILD_STACK_SIZE)) { + error_set(err, -1, "munmap of child stack failed (errno %d)", errno); + r = -1; + } + return r; } -- cgit v1.2.3 From e2aa5e650b07693477dff554053605976789fd68 Mon Sep 17 00:00:00 2001 From: Axel Rasmussen Date: Thu, 27 Jan 2022 14:11:15 -0800 Subject: selftests: fixup build warnings in pidfd / clone3 tests These are some trivial fixups, which were needed to build the tests with clang and -Werror. The following issues are fixed: - Remove various unused variables. - In child_poll_leader_exit_test, clang isn't smart enough to realize syscall(SYS_exit, 0) won't return, so it complains we never return from a non-void function. Add an extra exit(0) to appease it. - In test_pidfd_poll_leader_exit, ret may be branched on despite being uninitialized, if we have !use_waitpid. Initialize it to zero to get the right behavior in that case. Signed-off-by: Axel Rasmussen Acked-by: Christian Brauner Signed-off-by: Shuah Khan --- tools/testing/selftests/clone3/clone3.c | 2 -- tools/testing/selftests/pidfd/pidfd_test.c | 6 +++--- tools/testing/selftests/pidfd/pidfd_wait.c | 5 ++--- 3 files changed, 5 insertions(+), 8 deletions(-) (limited to 'tools/testing') diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c index 076cf4325f78..cd4582129c7d 100644 --- a/tools/testing/selftests/clone3/clone3.c +++ b/tools/testing/selftests/clone3/clone3.c @@ -126,8 +126,6 @@ static void test_clone3(uint64_t flags, size_t size, int expected, int main(int argc, char *argv[]) { - pid_t pid; - uid_t uid = getuid(); ksft_print_header(); diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index 529eb700ac26..9a2d64901d59 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -441,7 +441,6 @@ static void test_pidfd_poll_exec(int use_waitpid) { int pid, pidfd = 0; int status, ret; - pthread_t t1; time_t prog_start = time(NULL); const char *test_name = "pidfd_poll check for premature notification on child thread exec"; @@ -500,13 +499,14 @@ static int child_poll_leader_exit_test(void *args) */ *child_exit_secs = time(NULL); syscall(SYS_exit, 0); + /* Never reached, but appeases compiler thinking we should return. */ + exit(0); } static void test_pidfd_poll_leader_exit(int use_waitpid) { int pid, pidfd = 0; - int status, ret; - time_t prog_start = time(NULL); + int status, ret = 0; const char *test_name = "pidfd_poll check for premature notification on non-empty" "group leader exit"; diff --git a/tools/testing/selftests/pidfd/pidfd_wait.c b/tools/testing/selftests/pidfd/pidfd_wait.c index be2943f072f6..17999e082aa7 100644 --- a/tools/testing/selftests/pidfd/pidfd_wait.c +++ b/tools/testing/selftests/pidfd/pidfd_wait.c @@ -39,7 +39,7 @@ static int sys_waitid(int which, pid_t pid, siginfo_t *info, int options, TEST(wait_simple) { - int pidfd = -1, status = 0; + int pidfd = -1; pid_t parent_tid = -1; struct clone_args args = { .parent_tid = ptr_to_u64(&parent_tid), @@ -47,7 +47,6 @@ TEST(wait_simple) .flags = CLONE_PIDFD | CLONE_PARENT_SETTID, .exit_signal = SIGCHLD, }; - int ret; pid_t pid; siginfo_t info = { .si_signo = 0, @@ -88,7 +87,7 @@ TEST(wait_simple) TEST(wait_states) { - int pidfd = -1, status = 0; + int pidfd = -1; pid_t parent_tid = -1; struct clone_args args = { .parent_tid = ptr_to_u64(&parent_tid), -- cgit v1.2.3 From 183f80fd72db42c9cc483aa7a5e8e881355d0b03 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 1 Feb 2022 18:38:36 +0000 Subject: selftests/ir: fix build with ancient kernel headers Since commit e2bcbd7769ee ("tools headers UAPI: remove stale lirc.h"), the build of the selftests fails on rhel 8 since its version of /usr/include/linux/lirc.h has no definition of RC_PROTO_RCMM32, etc [1]. [1] https://lkml.org/lkml/2022/1/28/275 Fixes: e2bcbd7769ee ("tools headers UAPI: remove stale lirc.h") Reviewed-by: Shuah Khan Reported-by: kernel test robot Signed-off-by: Sean Young Signed-off-by: Shuah Khan --- tools/testing/selftests/ir/ir_loopback.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'tools/testing') diff --git a/tools/testing/selftests/ir/ir_loopback.c b/tools/testing/selftests/ir/ir_loopback.c index 06256c96df12..f4a15cbdd5ea 100644 --- a/tools/testing/selftests/ir/ir_loopback.c +++ b/tools/testing/selftests/ir/ir_loopback.c @@ -29,6 +29,16 @@ #define SYSFS_PATH_MAX 256 #define DNAME_PATH_MAX 256 +/* + * Support ancient lirc.h which does not have these values. Can be removed + * once RHEL 8 is no longer a relevant testing platform. + */ +#if RC_PROTO_MAX < 26 +#define RC_PROTO_RCMM12 24 +#define RC_PROTO_RCMM24 25 +#define RC_PROTO_RCMM32 26 +#endif + static const struct { enum rc_proto proto; const char *name; -- cgit v1.2.3 From 857898eb4b28daf3faca3ae334c78b2bb141475e Mon Sep 17 00:00:00 2001 From: Matthieu Baerts Date: Wed, 9 Feb 2022 17:25:07 -0800 Subject: selftests: mptcp: add missing join check This function also writes the name of the test with its ID, making clear a new test has been executed. Without that, the ADD_ADDR results from this test was appended at the end of the previous test causing confusions. Especially when the second test was failing, we had: 17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] add[fail] got 2 ADD_ADDR[s] expected 3 In fact, this 17th test was OK but not the 18th one. Now we have: 17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] 18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3 - synack[fail] got 2 JOIN[s] synack expected - ack[fail] got 2 JOIN[s] ack expected 3 add[fail] got 2 ADD_ADDR[s] expected 3 Fixes: 33c563ad28e3 ("selftests: mptcp: add_addr and echo race test") Reported-by: Paolo Abeni Signed-off-by: Matthieu Baerts Signed-off-by: Mat Martineau Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 1 + 1 file changed, 1 insertion(+) (limited to 'tools/testing') diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index b8bdbec0cf69..c0801df15f54 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -1159,6 +1159,7 @@ signal_address_tests() ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags signal ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags signal run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr "signal addresses race test" 3 3 3 # the server will not signal the address terminating # the MPC subflow -- cgit v1.2.3