From 315ad8780a129e82e2c5c65ee6e970d91a577acb Mon Sep 17 00:00:00 2001 From: Rong Xu Date: Sat, 2 Nov 2024 10:51:08 -0700 Subject: kbuild: Add AutoFDO support for Clang build Add the build support for using Clang's AutoFDO. Building the kernel with AutoFDO does not reduce the optimization level from the compiler. AutoFDO uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. Experiments showed that the kernel can improve up to 10% in latency. The support requires a Clang compiler after LLVM 17. This submission is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Support for SPE on ARM 1, and BRBE on ARM 1 is part of planned future work. Here is an example workflow for AutoFDO kernel: 1) Build the kernel on the host machine with LLVM enabled, for example, $ make menuconfig LLVM=1 Turn on AutoFDO build config: CONFIG_AUTOFDO_CLANG=y With a configuration that has LLVM enabled, use the following command: scripts/config -e AUTOFDO_CLANG After getting the config, build with $ make LLVM=1 2) Install the kernel on the test machine. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c \ -o -- For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 For Zen3: $ cat proc/cpuinfo | grep " brs" For Zen4: $ cat proc/cpuinfo | grep amd_lbr_v2 $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c -o -- 4) (Optional) Download the raw perf file to the host machine. 5) To generate an AutoFDO profile, two offline tools are available: create_llvm_prof and llvm_profgen. The create_llvm_prof tool is part of the AutoFDO project and can be found on GitHub (https://github.com/google/autofdo), version v0.30.1 or later. The llvm_profgen tool is included in the LLVM compiler itself. It's important to note that the version of llvm_profgen doesn't need to match the version of Clang. It needs to be the LLVM 19 release or later, or from the LLVM trunk. $ llvm-profgen --kernel --binary= --perfdata= \ -o or $ create_llvm_prof --binary= --profile= \ --format=extbinary --out= Note that multiple AutoFDO profile files can be merged into one via: $ llvm-profdata merge -o ... 6) Rebuild the kernel using the AutoFDO profile file with the same config as step 1, (Note CONFIG_AUTOFDO_CLANG needs to be enabled): $ make LLVM=1 CLANG_AUTOFDO_PROFILE= Co-developed-by: Han Shen Signed-off-by: Han Shen Signed-off-by: Rong Xu Suggested-by: Sriraman Tallam Suggested-by: Krzysztof Pszeniczny Suggested-by: Nick Desaulniers Suggested-by: Stephane Eranian Tested-by: Yonghong Song Tested-by: Yabin Cui Tested-by: Nathan Chancellor Reviewed-by: Kees Cook Tested-by: Peter Jung Signed-off-by: Masahiro Yamada --- tools/objtool/check.c | 1 + 1 file changed, 1 insertion(+) (limited to 'tools') diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 6604f5d038aa..4c5229991e1e 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -4557,6 +4557,7 @@ static int validate_ibt(struct objtool_file *file) !strcmp(sec->name, "__jump_table") || !strcmp(sec->name, "__mcount_loc") || !strcmp(sec->name, ".kcfi_traps") || + !strcmp(sec->name, ".llvm.call-graph-profile") || strstr(sec->name, "__patchable_function_entries")) continue; -- cgit v1.2.3 From 18e885099f1c52755f054202525cb60d3edcda44 Mon Sep 17 00:00:00 2001 From: Rong Xu Date: Sat, 2 Nov 2024 10:51:09 -0700 Subject: objtool: Fix unreachable instruction warnings for weak functions In the presence of both weak and strong function definitions, the linker drops the weak symbol in favor of a strong symbol, but leaves the code in place. Code in ignore_unreachable_insn() has some heuristics to suppress the warning, but it does not work when -ffunction-sections is enabled. Suppose function foo has both strong and weak definitions. Case 1: The strong definition has an annotated section name, like .init.text. Only the weak definition will be placed into .text.foo. But since the section has no symbols, there will be no "hole" in the section. Case 2: Both sections are without an annotated section name. Both will be placed into .text.foo section, but there will be only one symbol (the strong one). If the weak code is before the strong code, there is no "hole" as it fails to find the right-most symbol before the offset. The fix is to use the first node to compute the hole if hole.sym is empty. If there is no symbol in the section, the first node will be NULL, in which case, -1 is returned to skip the whole section. Co-developed-by: Han Shen Signed-off-by: Han Shen Signed-off-by: Rong Xu Suggested-by: Sriraman Tallam Suggested-by: Krzysztof Pszeniczny Tested-by: Yonghong Song Tested-by: Yabin Cui Tested-by: Nathan Chancellor Reviewed-by: Kees Cook Acked-by: Josh Poimboeuf Signed-off-by: Masahiro Yamada --- tools/objtool/elf.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'tools') diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 3d27983dc908..6f64d611faea 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -224,12 +224,17 @@ int find_symbol_hole_containing(const struct section *sec, unsigned long offset) if (n) return 0; /* not a hole */ - /* didn't find a symbol for which @offset is after it */ - if (!hole.sym) - return 0; /* not a hole */ + /* + * @offset >= sym->offset + sym->len, find symbol after it. + * When hole.sym is empty, use the first node to compute the hole. + * If there is no symbol in the section, the first node will be NULL, + * in which case, -1 is returned to skip the whole section. + */ + if (hole.sym) + n = rb_next(&hole.sym->node); + else + n = rb_first_cached(&sec->symbol_tree); - /* @offset >= sym->offset + sym->len, find symbol after it */ - n = rb_next(&hole.sym->node); if (!n) return -1; /* until end of address space */ -- cgit v1.2.3 From d5dc95836147f2e25b134c0ca3a0bc1a5867ea29 Mon Sep 17 00:00:00 2001 From: Rong Xu Date: Sat, 2 Nov 2024 10:51:14 -0700 Subject: kbuild: Add Propeller configuration for kernel build MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the build support for using Clang's Propeller optimizer. Like AutoFDO, Propeller uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. The support requires a Clang compiler LLVM 19 or later, and the create_llvm_prof tool (https://github.com/google/autofdo/releases/tag/v0.30.1). This commit is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Here is an example workflow for building an AutoFDO+Propeller optimized kernel: 1) Build the kernel on the host machine, with AutoFDO and Propeller build config CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y then $ make LLVM=1 CLANG_AUTOFDO_PROFILE= “” is the profile collected when doing a non-Propeller AutoFDO build. This step builds a kernel that has the same optimization level as AutoFDO, plus a metadata section that records basic block information. This kernel image runs as fast as an AutoFDO optimized kernel. 2) Install the kernel on test/production machines. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c \ -o -- For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 # To see if Zen3 support LBR: $ cat proc/cpuinfo | grep " brs" # To see if Zen4 support LBR: $ cat proc/cpuinfo | grep amd_lbr_v2 # If the result is yes, then collect the profile using: $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c -o -- 4) (Optional) Download the raw perf file to the host machine. 5) Generate Propeller profile: $ create_llvm_prof --binary= --profile= \ --format=propeller --propeller_output_module_name \ --out=_cc_profile.txt \ --propeller_symorder=_ld_profile.txt “create_llvm_prof” is the profile conversion tool, and a prebuilt binary for linux can be found on https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build from source). "" can be something like "/home/user/dir/any_string". This command generates a pair of Propeller profiles: "_cc_profile.txt" and "_ld_profile.txt". 6) Rebuild the kernel using the AutoFDO and Propeller profile files. CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y and $ make LLVM=1 CLANG_AUTOFDO_PROFILE= \ CLANG_PROPELLER_PROFILE_PREFIX= Co-developed-by: Han Shen Signed-off-by: Han Shen Signed-off-by: Rong Xu Suggested-by: Sriraman Tallam Suggested-by: Krzysztof Pszeniczny Suggested-by: Nick Desaulniers Suggested-by: Stephane Eranian Tested-by: Yonghong Song Tested-by: Nathan Chancellor Reviewed-by: Kees Cook Signed-off-by: Masahiro Yamada --- tools/objtool/check.c | 1 + 1 file changed, 1 insertion(+) (limited to 'tools') diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 4c5229991e1e..05a0fb4a3d1a 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -4558,6 +4558,7 @@ static int validate_ibt(struct objtool_file *file) !strcmp(sec->name, "__mcount_loc") || !strcmp(sec->name, ".kcfi_traps") || !strcmp(sec->name, ".llvm.call-graph-profile") || + !strcmp(sec->name, ".llvm_bb_addr_map") || strstr(sec->name, "__patchable_function_entries")) continue; -- cgit v1.2.3