From 98fc9692ac3de6e3a4fc25a83d2908caa7665e98 Mon Sep 17 00:00:00 2001 From: Sean Tranchetti Date: Tue, 5 Jan 2021 16:22:26 -0800 Subject: tools: selftests: add test for changing routes with PTMU exceptions [ Upstream commit 5316a7c0130acf09bfc8bb0092407006010fcccc ] Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change. These tests explicitly test for a recently discovered problem in the IPv6 routing framework where PMTU exceptions were not properly released when replacing a route via "ip route change ...". After creating PMTU exceptions, the route from the device A to R1 will be replaced with a new route, then device A will be deleted. If the PMTU exceptions were properly cleaned up by the kernel, this device deletion will succeed. Otherwise, the unregistration of the device will stall, and messages such as the following will be logged in dmesg: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4 Signed-off-by: Sean Tranchetti Reviewed-by: David Ahern Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- tools/testing/selftests/net/pmtu.sh | 71 +++++++++++++++++++++++++++++++++++-- 1 file changed, 69 insertions(+), 2 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index 71a62e7e35b1..3429767cadcd 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -119,7 +119,15 @@ # - list_flush_ipv6_exception # Using the same topology as in pmtu_ipv6, create exceptions, and check # they are shown when listing exception caches, gone after flushing them - +# +# - pmtu_ipv4_route_change +# Use the same topology as in pmtu_ipv4, but issue a route replacement +# command and delete the corresponding device afterward. This tests for +# proper cleanup of the PMTU exceptions by the route replacement path. +# Device unregistration should complete successfully +# +# - pmtu_ipv6_route_change +# Same as above but with IPv6 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -161,7 +169,9 @@ tests=" cleanup_ipv4_exception ipv4: cleanup of cached exceptions 1 cleanup_ipv6_exception ipv6: cleanup of cached exceptions 1 list_flush_ipv4_exception ipv4: list and flush cached exceptions 1 - list_flush_ipv6_exception ipv6: list and flush cached exceptions 1" + list_flush_ipv6_exception ipv6: list and flush cached exceptions 1 + pmtu_ipv4_route_change ipv4: PMTU exception w/route replace 1 + pmtu_ipv6_route_change ipv6: PMTU exception w/route replace 1" NS_A="ns-A" NS_B="ns-B" @@ -1316,6 +1326,63 @@ test_list_flush_ipv6_exception() { return ${fail} } +test_pmtu_ipvX_route_change() { + family=${1} + + setup namespaces routing || return 2 + trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \ + "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \ + "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2 + + if [ ${family} -eq 4 ]; then + ping=ping + dst1="${prefix4}.${b_r1}.1" + dst2="${prefix4}.${b_r2}.1" + gw="${prefix4}.${a_r1}.2" + else + ping=${ping6} + dst1="${prefix6}:${b_r1}::1" + dst2="${prefix6}:${b_r2}::1" + gw="${prefix6}:${a_r1}::2" + fi + + # Set up initial MTU values + mtu "${ns_a}" veth_A-R1 2000 + mtu "${ns_r1}" veth_R1-A 2000 + mtu "${ns_r1}" veth_R1-B 1400 + mtu "${ns_b}" veth_B-R1 1400 + + mtu "${ns_a}" veth_A-R2 2000 + mtu "${ns_r2}" veth_R2-A 2000 + mtu "${ns_r2}" veth_R2-B 1500 + mtu "${ns_b}" veth_B-R2 1500 + + # Create route exceptions + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} + + # Check that exceptions have been created with the correct PMTU + pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" + check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1 + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1 + + # Replace the route from A to R1 + run_cmd ${ns_a} ip route change default via ${gw} + + # Delete the device in A + run_cmd ${ns_a} ip link del "veth_A-R1" +} + +test_pmtu_ipv4_route_change() { + test_pmtu_ipvX_route_change 4 +} + +test_pmtu_ipv6_route_change() { + test_pmtu_ipvX_route_change 6 +} + usage() { echo echo "$0 [OPTIONS] [TEST]..." -- cgit v1.2.3 From a2b2ae3812e55b625cfcc715f93ae4330a93f6f4 Mon Sep 17 00:00:00 2001 From: Alan Maguire Date: Wed, 6 Jan 2021 15:59:06 +0000 Subject: bpftool: Fix compilation failure for net.o with older glibc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 6f02b540d7597f357bc6ee711346761045d4e108 upstream. For older glibc ~2.17, #include'ing both linux/if.h and net/if.h fails due to complaints about redefinition of interface flags: CC net.o In file included from net.c:13:0: /usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’ IFF_UP = 1<<0, /* sysfs */ ^ /usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here IFF_UP = 0x1, /* Interface is up. */ The issue was fixed in kernel headers in [1], but since compilation of net.c picks up system headers the problem can recur. Dropping #include resolves the issue and it is not needed for compilation anyhow. [1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/ Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support") Signed-off-by: Alan Maguire Signed-off-by: Andrii Nakryiko Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/1609948746-15369-1-git-send-email-alan.maguire@oracle.com Signed-off-by: Greg Kroah-Hartman --- tools/bpf/bpftool/net.c | 1 - 1 file changed, 1 deletion(-) (limited to 'tools') diff --git a/tools/bpf/bpftool/net.c b/tools/bpf/bpftool/net.c index bb311ccc6c48..c6787a1daa48 100644 --- a/tools/bpf/bpftool/net.c +++ b/tools/bpf/bpftool/net.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3