# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/nuvoton,ma35d1-dwmac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Nuvoton DWMAC glue layer controller

maintainers:
  - Joey Lu <yclu4@nuvoton.com>

description:
  Nuvoton 10/100/1000Mbps Gigabit Ethernet MAC Controller is based on
  Synopsys DesignWare MAC (version 3.73a).

select:
  properties:
    compatible:
      contains:
        enum:
          - nuvoton,ma35d1-dwmac
  required:
    - compatible

allOf:
  - $ref: snps,dwmac.yaml#

properties:
  compatible:
    items:
      - const: nuvoton,ma35d1-dwmac
      - const: snps,dwmac-3.70a

  reg:
    maxItems: 1
    description:
      Register range should be one of the GMAC interface.

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: MAC clock
      - description: PTP clock

  clock-names:
    items:
      - const: stmmaceth
      - const: ptp_ref

  nuvoton,sys:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle to access syscon registers.
          - description: GMAC interface ID.
            enum:
              - 0
              - 1
    description:
      A phandle to the syscon with one argument that configures system registers
      for MA35D1's two GMACs. The argument specifies the GMAC interface ID.

  resets:
    maxItems: 1

  reset-names:
    items:
      - const: stmmaceth

  phy-mode:
    enum:
      - rmii
      - rgmii
      - rgmii-id
      - rgmii-txid
      - rgmii-rxid

  tx-internal-delay-ps:
    default: 0
    minimum: 0
    maximum: 2000
    description:
      RGMII TX path delay used only when PHY operates in RGMII mode with
      internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
      Allowed values are from 0 to 2000.

  rx-internal-delay-ps:
    default: 0
    minimum: 0
    maximum: 2000
    description:
      RGMII RX path delay used only when PHY operates in RGMII mode with
      internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
      Allowed values are from 0 to 2000.

required:
  - clocks
  - clock-names
  - nuvoton,sys
  - resets
  - reset-names
  - phy-mode

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
    #include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
    ethernet@40120000 {
        compatible = "nuvoton,ma35d1-dwmac", "snps,dwmac-3.70a";
        reg = <0x40120000 0x10000>;
        interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-names = "macirq";
        clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
        clock-names = "stmmaceth", "ptp_ref";

        nuvoton,sys = <&sys 0>;
        resets = <&sys MA35D1_RESET_GMAC0>;
        reset-names = "stmmaceth";
        snps,multicast-filter-bins = <0>;
        snps,perfect-filter-entries = <8>;
        rx-fifo-depth = <4096>;
        tx-fifo-depth = <2048>;

        phy-mode = "rgmii-id";
        phy-handle = <&eth_phy0>;
        mdio {
            compatible = "snps,dwmac-mdio";
            #address-cells = <1>;
            #size-cells = <0>;

            eth_phy0: ethernet-phy@0 {
                reg = <0>;
            };
        };
    };