Typec orientation switch via a GPIO
-----------------------------------

Required properties:
- compatible: should be set one of following:
	- "nxp,ptn36043" or "nxp,cbtl04gp" for NXP Type-C SuperSpeed
	  active switch.

- gpios: the GPIO used to switch the super speed active channel,
		GPIO_ACTIVE_HIGH: GPIO state high for cc1;
		GPIO_ACTIVE_LOW:  GPIO state low for cc1.
- orientation-switch: must be present.

Required sub-node:
- port: specify the remote endpoint of typec switch consumer.

Example:

ptn36043 {
	compatible = "nxp,ptn36043";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ss_sel>;
	gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
	orientation-switch;

	port {
		usb3_data_ss: endpoint {
			remote-endpoint = <&typec_con_ss>;
		};
	};
};