/* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; #include "imx51.dtsi" / { model = "Freescale i.MX51 Babbage Board"; compatible = "fsl,imx51-babbage", "fsl,imx51"; memory { reg = <0x90000000 0x20000000>; }; display@di0 { compatible = "fsl,imx-parallel-display"; crtcs = <&ipu 0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1_1>; display-timings { native-mode = <&timing0>; timing0: dvi { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; hback-porch = <220>; hfront-porch = <40>; vback-porch = <21>; vfront-porch = <7>; hsync-len = <60>; vsync-len = <10>; }; }; }; display@di1 { compatible = "fsl,imx-parallel-display"; crtcs = <&ipu 1>; interface-pix-fmt = "rgb565"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp2_1>; status = "disabled"; display-timings { native-mode = <&timing1>; timing1: claawvga { clock-frequency = <27000000>; hactive = <800>; vactive = <480>; hback-porch = <40>; hfront-porch = <60>; vback-porch = <10>; vfront-porch = <10>; hsync-len = <20>; vsync-len = <10>; hsync-active = <0>; vsync-active = <0>; de-active = <1>; pixelclk-active = <0>; }; }; }; gpio-keys { compatible = "gpio-keys"; power { label = "Power Button"; gpios = <&gpio2 21 0>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; }; sound { compatible = "fsl,imx51-babbage-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx51-babbage-sgtl5000"; ssi-controller = <&ssi2>; audio-codec = <&sgtl5000>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; mux-int-port = <2>; mux-ext-port = <3>; }; clocks { ckih1 { clock-frequency = <22579200>; }; clk_26M: codec_clock { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; clock-frequency = <26000000>; gpios = <&gpio4 26 1>; }; }; }; &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1_1>; fsl,cd-controller; fsl,wp-controller; status = "okay"; }; &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2_1>; cd-gpios = <&gpio1 6 0>; wp-gpios = <&gpio1 5 0>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>; fsl,uart-has-rtscts; status = "okay"; }; &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; status = "okay"; pmic: mc13892@0 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mc13892"; spi-max-frequency = <6000000>; spi-cs-high; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <8 0x4>; regulators { sw1_reg: sw1 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1375000>; regulator-boot-on; regulator-always-on; }; sw2_reg: sw2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; sw3_reg: sw3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; vpll_reg: vpll { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; vdig_reg: vdig { regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1650000>; regulator-boot-on; }; vsd_reg: vsd { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3150000>; }; vusb2_reg: vusb2 { regulator-min-microvolt = <2400000>; regulator-max-microvolt = <2775000>; regulator-boot-on; regulator-always-on; }; vvideo_reg: vvideo { regulator-min-microvolt = <2775000>; regulator-max-microvolt = <2775000>; }; vaudio_reg: vaudio { regulator-min-microvolt = <2300000>; regulator-max-microvolt = <3000000>; }; vcam_reg: vcam { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <3000000>; }; vgen1_reg: vgen1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; vgen2_reg: vgen2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3150000>; regulator-always-on; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; regulator-always-on; }; }; }; flash: at45db321d@1 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; spi-max-frequency = <25000000>; reg = <1>; partition@0 { label = "U-Boot"; reg = <0x0 0x40000>; read-only; }; partition@40000 { label = "Kernel"; reg = <0x40000 0x3c0000>; }; }; }; &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; hog { pinctrl_hog: hoggrp { fsl,pins = < MX51_PAD_GPIO1_0__SD1_CD 0x20d5 MX51_PAD_GPIO1_1__SD1_WP 0x20d5 MX51_PAD_GPIO1_5__GPIO1_5 0x100 MX51_PAD_GPIO1_6__GPIO1_6 0x100 MX51_PAD_EIM_A27__GPIO2_21 0x5 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 >; }; }; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>; fsl,uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clk_26M>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "mii"; status = "okay"; }; &kpp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kpp_1>; linux,keymap = <0x00000067 /* KEY_UP */ 0x0001006c /* KEY_DOWN */ 0x00020072 /* KEY_VOLUMEDOWN */ 0x00030066 /* KEY_HOME */ 0x0100006a /* KEY_RIGHT */ 0x01010069 /* KEY_LEFT */ 0x0102001c /* KEY_ENTER */ 0x01030073 /* KEY_VOLUMEUP */ 0x02000040 /* KEY_F6 */ 0x02010042 /* KEY_F8 */ 0x02020043 /* KEY_F9 */ 0x02030044 /* KEY_F10 */ 0x0300003b /* KEY_F1 */ 0x0301003c /* KEY_F2 */ 0x0302003d /* KEY_F3 */ 0x03030074>; /* KEY_POWER */ status = "okay"; };