/* * Copyright (C) 2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include #include "imx6sx.dtsi" / { model = "Freescale i.MX6 SoloX SDB Board"; compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; backlight1 { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; fb-names = "mxs-lcdif0"; }; backlight2 { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; fb-names = "mxs-lcdif1"; }; hannstar_cabc { compatible = "hannstar,cabc"; lvds0 { gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; }; }; memory { reg = <0x80000000 0x40000000>; }; pxp_v4l2_out { compatible = "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2"; status = "okay"; }; regulators { compatible = "simple-bus"; reg_lcd_3v3: lcd-3v3 { compatible = "regulator-fixed"; regulator-name = "lcd-3v3"; gpio = <&gpio3 27 0>; enable-active-high; status = "disabled"; }; reg_sd3_vmmc: sd3_vmmc{ compatible = "regulator-fixed"; regulator-name = "VCC_SD3"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_vref_3v3: regulator@0 { compatible = "regulator-fixed"; regulator-name = "vref-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; reg_psu_5v: psu_5v0 { compatible = "regulator-fixed"; regulator-name = "PSU-5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-boot-on; }; reg_usb_otg1_vbus: usb_otg1_vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 9 0>; enable-active-high; }; reg_usb_otg2_vbus: usb_otg2_vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg2_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 12 0>; enable-active-high; }; }; gpio-keys { compatible = "gpio-keys"; volume-up { label = "Volume Up"; gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; sound { compatible = "fsl,imx6q-sabresd-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; cpu-dai = <&ssi2>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", "Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "AMIC", "MICBIAS", "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <6>; hp-det-gpios = <&gpio1 17 1>; }; sound-spdif { compatible = "fsl,imx-audio-spdif", "fsl,imx6sx-sdb-spdif"; model = "imx-spdif"; spdif-controller = <&spdif>; spdif-out; }; csi1_v4l2_cap { compatible = "fsl,imx6sx-csi-v4l2", "fsl,imx6sl-csi-v4l2"; csi_id = <0>; status = "okay"; }; csi2_v4l2_cap { compatible = "fsl,imx6sx-csi-v4l2", "fsl,imx6sl-csi-v4l2"; csi_id = <1>; status = "okay"; }; }; &csi1 { status = "okay"; }; &csi2 { status = "okay"; }; &adc1 { vref-supply = <®_vref_3v3>; status = "okay"; }; &adc2 { vref-supply = <®_vref_3v3>; status = "okay"; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1_1 &pinctrl_enet1_clkout_1>; pinctrl-assert-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>, <&gpio2 6 GPIO_ACTIVE_LOW>; phy-mode = "rgmii"; fsl,num_tx_queues=<3>; fsl,num_rx_queues=<3>; status = "okay"; }; &fec2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2_1>; phy-mode = "rgmii"; fsl,num_tx_queues=<3>; fsl,num_rx_queues=<3>; status = "okay"; }; &gpc { fsl,cpu_pupscr_sw2iso = <0xf>; fsl,cpu_pupscr_sw = <0xf>; fsl,cpu_pdnscr_iso2sw = <0x1>; fsl,cpu_pdnscr_iso = <0x1>; fsl,wdog-reset = <1>; /* watchdog select of reset source */ }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1>; status = "okay"; pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3a { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; regulator-always-on; }; vgen2_reg: vgen2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; ov564x: ov564x@3c { compatible = "ovti,ov564x"; reg = <0x3c>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_csi_0>; clocks = <&clks IMX6SX_CLK_CSI>; clock-names = "csi_mclk"; AVDD-supply = <&vgen3_reg>; /* 2.8v */ DVDD-supply = <&vgen2_reg>; /* 1.5v*/ pwn-gpios = <&gpio3 28 1>; rst-gpios = <&gpio3 27 0>; csi_id = <0>; mclk = <24000000>; mclk_source = <0>; }; }; &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1_1>; trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &flexcan2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2_1>; trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio4>; interrupts = <19 2>; wakeup-gpios = <&gpio4 19 0>; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_2>; status = "okay"; isl29023@44 { compatible = "fsl,isl29023"; reg = <0x44>; rext = <499>; interrupt-parent = <&gpio6>; interrupts = <5 1>; shared-interrupt; }; mag3110@0e { compatible = "fsl,mag3110"; reg = <0x0e>; position = <2>; interrupt-parent = <&gpio6>; interrupts = <5 1>; shared-interrupt; }; mma8451@1c { compatible = "fsl,mma8451"; reg = <0x1c>; position = <1>; interrupt-parent = <&gpio6>; interrupts = <2 8>; interrupt-route = <2>; }; }; &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4_1>; status = "okay"; codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clks IMX6SX_CLK_AUDIO>; DCVDD-supply = <&vgen4_reg>; DBVDD-supply = <&vgen4_reg>; AVDD-supply = <&vgen4_reg>; CPVDD-supply = <&vgen4_reg>; MICVDD-supply = <&vgen3_reg>; PLLVDD-supply = <&vgen4_reg>; SPKVDD1-supply = <®_psu_5v>; SPKVDD2-supply = <®_psu_5v>; amic-mono; }; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; usdhc4 { pinctrl_usdhc4_gpios: usdhc4-gpios { fsl,pins = < MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 >; }; }; hog { pinctrl_hog: hoggrp { fsl,pins = < MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x80000000 MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059 MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x17059 MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0x17059 MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x17059 MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059 MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0xb000 >; }; }; }; &pcie { power-on-gpio = <&gpio2 0 0>; reset-gpio = <&gpio2 1 0>; status = "okay"; }; &sai1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1_2>; status = "disabled"; }; &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdif_2>; status = "okay"; }; &ssi2 { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; &uart5 { /* for bluetooth */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5_1>; fsl,uart-has-rtscts; status = "okay"; }; &usbotg1 { vbus-supply = <®_usb_otg1_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg1_1>; imx6-usb-charger-detection; status = "okay"; }; &usbotg2 { vbus-supply = <®_usb_otg2_vbus>; dr_mode = "host"; status = "okay"; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2_1>; non-removable; no-1-8-v; keep-power-in-suspend; enable-sdio-wakeup; status = "okay"; }; &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3_1>; pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; bus-width = <8>; cd-gpios = <&gpio2 10 0>; wp-gpios = <&gpio2 15 0>; keep-power-in-suspend; enable-sdio-wakeup; vmmc-supply = <®_sd3_vmmc>; status = "okay"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_2 &pinctrl_usdhc4_gpios>; cd-gpios = <&gpio6 21 0>; wp-gpios = <&gpio6 20 0>; status = "okay"; }; &lcdif1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat_0 &pinctrl_lcdif_ctrl_0>; lcd-supply = <®_lcd_3v3>; display = <&display0>; status = "disabled"; display0: display { bits-per-pixel = <16>; bus-width = <24>; display-timings { native-mode = <&timing0>; timing0: timing0 { clock-frequency = <33500000>; hactive = <800>; vactive = <480>; hback-porch = <89>; hfront-porch = <164>; vback-porch = <23>; vfront-porch = <10>; hsync-len = <10>; vsync-len = <10>; hsync-active = <0>; vsync-active = <0>; de-active = <1>; pixelclk-active = <0>; }; }; }; }; &lcdif2 { display = <&display1>; disp-dev = "ldb"; status = "okay"; display1: display { bits-per-pixel = <16>; bus-width = <18>; }; }; &ldb { status = "okay"; lvds-channel@0 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; crtc = "lcdif2"; status = "okay"; display-timings { native-mode = <&timing1>; timing1: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; hback-porch = <220>; hfront-porch = <40>; vback-porch = <21>; vfront-porch = <7>; hsync-len = <60>; vsync-len = <10>; }; }; }; }; &dcic1 { dcic_id = <0>; dcic_mux = "dcic-lcdif1"; status = "okay"; }; &dcic2 { dcic_id = <1>; dcic_mux = "dcic-lvds"; status = "okay"; }; &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3_1>; status = "okay"; }; &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4_0>; status = "okay"; }; &pxp { status = "okay"; }; &qspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi2_1>; status = "okay"; flash0: s25fl128s@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl128s"; spi-max-frequency = <66000000>; reg = <0>; }; flash1: s25fl128s@1 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl128s"; spi-max-frequency = <66000000>; reg = <1>; }; }; &vadc { vadc_in = <0>; csi_id = <1>; status = "okay"; };