/* * linux/arch/arm/mach-omap1/board-perseus2.c * * Modified from board-generic.c * * Original OMAP730 support by Jean Pihet * Updated for 2.6 by Kevin Hilman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int p2_keymap[] = { KEY(0,0,KEY_UP), KEY(0,1,KEY_RIGHT), KEY(0,2,KEY_LEFT), KEY(0,3,KEY_DOWN), KEY(0,4,KEY_ENTER), KEY(1,0,KEY_F10), KEY(1,1,KEY_SEND), KEY(1,2,KEY_END), KEY(1,3,KEY_VOLUMEDOWN), KEY(1,4,KEY_VOLUMEUP), KEY(1,5,KEY_RECORD), KEY(2,0,KEY_F9), KEY(2,1,KEY_3), KEY(2,2,KEY_6), KEY(2,3,KEY_9), KEY(2,4,KEY_KPDOT), KEY(3,0,KEY_BACK), KEY(3,1,KEY_2), KEY(3,2,KEY_5), KEY(3,3,KEY_8), KEY(3,4,KEY_0), KEY(3,5,KEY_KPSLASH), KEY(4,0,KEY_HOME), KEY(4,1,KEY_1), KEY(4,2,KEY_4), KEY(4,3,KEY_7), KEY(4,4,KEY_KPASTERISK), KEY(4,5,KEY_POWER), 0 }; static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ .end = H2P2_DBG_FPGA_ETHR_START + 0xf, .flags = IORESOURCE_MEM, }, [1] = { .start = INT_730_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "bootloader", .offset = 0, .size = SZ_128K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next sector */ { .name = "params", .offset = MTDPART_OFS_APPEND, .size = SZ_128K, .mask_flags = 0, }, /* kernel */ { .name = "kernel", .offset = MTDPART_OFS_APPEND, .size = SZ_2M, .mask_flags = 0 }, /* rest of flash is a file system */ { .name = "rootfs", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0 }, }; static struct flash_platform_data nor_data = { .map_name = "cfi_probe", .width = 2, .parts = nor_partitions, .nr_parts = ARRAY_SIZE(nor_partitions), }; static struct resource nor_resource = { .start = OMAP_CS0_PHYS, .end = OMAP_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; static struct platform_device nor_device = { .name = "omapflash", .id = 0, .dev = { .platform_data = &nor_data, }, .num_resources = 1, .resource = &nor_resource, }; static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, }; static struct resource nand_resource = { .start = OMAP_CS3_PHYS, .end = OMAP_CS3_PHYS + SZ_4K - 1, .flags = IORESOURCE_MEM, }; static struct platform_device nand_device = { .name = "omapnand", .id = 0, .dev = { .platform_data = &nand_data, }, .num_resources = 1, .resource = &nand_resource, }; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; static struct resource kp_resources[] = { [0] = { .start = INT_730_MPUIO_KEYPAD, .end = INT_730_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; static struct omap_kp_platform_data kp_data = { .rows = 8, .cols = 8, .keymap = p2_keymap, .keymapsize = ARRAY_SIZE(p2_keymap), .delay = 4, .dbounce = 1, }; static struct platform_device kp_device = { .name = "omap-keypad", .id = -1, .dev = { .platform_data = &kp_data, }, .num_resources = ARRAY_SIZE(kp_resources), .resource = kp_resources, }; static struct platform_device lcd_device = { .name = "lcd_p2", .id = -1, }; static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, &lcd_device, }; #define P2_NAND_RB_GPIO_PIN 62 static int nand_dev_ready(struct omap_nand_platform_data *data) { return gpio_get_value(P2_NAND_RB_GPIO_PIN); } static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; static struct omap_board_config_kernel perseus2_config[] __initdata = { { OMAP_TAG_LCD, &perseus2_lcd_config }, }; static void __init omap_perseus2_init(void) { if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); nand_data.dev_ready = nand_dev_ready; omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = perseus2_config; omap_board_config_size = ARRAY_SIZE(perseus2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); } static void __init perseus2_init_smc91x(void) { fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); perseus2_init_smc91x(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { { .virtual = H2P2_DBG_FPGA_BASE, .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), .length = H2P2_DBG_FPGA_SIZE, .type = MT_DEVICE } }; static void __init omap_perseus2_map_io(void) { omap1_map_common_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); /* Early, board-dependent init */ /* * Hold GSM Reset until needed */ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver */ /* * CSx timings, GPIO Mux ... setup */ /* Flash: CS0 timings setup */ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") /* Maintainer: Kevin Hilman */ .phys_io = 0xfff00000, .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_perseus2_map_io, .init_irq = omap_perseus2_init_irq, .init_machine = omap_perseus2_init, .timer = &omap_timer, MACHINE_END