/* * arch/arm/mach-tegra/tegra11_soctherm.h * * Copyright (c) 2011-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef __MACH_TEGRA_11x_SOCTHERM_H #define __MACH_TEGRA_11x_SOCTHERM_H /* This order must match the soc_therm HW register spec */ enum soctherm_sense { TSENSE_CPU0 = 0, TSENSE_CPU1, TSENSE_CPU2, TSENSE_CPU3, TSENSE_MEM0, TSENSE_MEM1, TSENSE_GPU, TSENSE_PLLX, TSENSE_SIZE, }; /* This order must match the soc_therm HW register spec */ enum soctherm_therm_id { THERM_CPU = 0, THERM_GPU, THERM_MEM, THERM_PLL, THERM_SIZE, }; enum soctherm_throttle_id { THROTTLE_LIGHT = 0, THROTTLE_HEAVY, THROTTLE_OC1, THROTTLE_OC2, THROTTLE_OC3, THROTTLE_OC4, THROTTLE_OC5, /* OC5 is reserved for WAR to Bug 1415030 */ THROTTLE_SIZE, }; enum soctherm_throttle_dev_id { THROTTLE_DEV_CPU = 0, THROTTLE_DEV_GPU, THROTTLE_DEV_SIZE, THROTTLE_DEV_NONE, }; enum soctherem_oc_irq_id { TEGRA_SOC_OC_IRQ_1, TEGRA_SOC_OC_IRQ_2, TEGRA_SOC_OC_IRQ_3, TEGRA_SOC_OC_IRQ_4, TEGRA_SOC_OC_IRQ_5, TEGRA_SOC_OC_IRQ_MAX, }; struct soctherm_sensor { bool sensor_enable; bool zone_enable; int tall; int tiddq; int ten_count; int tsample; int tsamp_ate; u8 pdiv; u8 pdiv_ate; }; struct soctherm_therm { bool zone_enable; int passive_delay; int num_trips; int hotspot_offset; struct thermal_trip_info trips[THERMAL_MAX_TRIPS]; struct thermal_zone_params *tzp; }; struct soctherm_throttle_dev { bool enable; u8 depth; /* if this is non-zero, the values below are ignored */ u8 dividend; u8 divisor; u16 duration; u8 step; char *throttling_depth; }; enum throt_mode { DISABLED = 0, STICKY, BRIEF, RESERVED, }; struct soctherm_throttle { u8 pgmask; u8 throt_mode; u8 polarity; u8 priority; u8 period; u32 alarm_cnt_threshold; u32 alarm_filter; bool intr; struct soctherm_throttle_dev devs[THROTTLE_DEV_SIZE]; }; struct soctherm_tsensor_pmu_data { u8 poweroff_reg_data; u8 poweroff_reg_addr; u8 reset_tegra; u8 controller_type; u8 i2c_controller_id; u8 pinmux; u8 pmu_16bit_ops; u8 pmu_i2c_addr; }; /** * struct soctherm_platform_data - Board specific SOC_THERM info. * @oc_irq_base: Base over-current IRQ number * @num_oc_irqs: Number of over-current IRQs * @soctherm_clk_rate: Clock rate for the SOC_THERM IP block. * @tsensor_clk_rate: Clock rate for the thermal sensors. * @sensor_data: An array containing the data of each sensor * See struct soctherm_sensor. * @therm: An array contanining the board specific * thermal zones and their respective settings, * such as trip points. * See struct soctherm_therm. * @throttle: static specification for hardware throttle * responses. * See struct soctherm_throttle. * @tshut_pmu_trip_data: PMU-specific thermal shutdown settings. * See struct tegra_tsensor_pmu_data. * * therm is used for trip point configuration and should be moved out of * soctherm_platform_data. */ struct soctherm_platform_data { int oc_irq_base; int num_oc_irqs; unsigned long soctherm_clk_rate; unsigned long tsensor_clk_rate; struct soctherm_sensor sensor_data[TSENSE_SIZE]; struct soctherm_therm therm[THERM_SIZE]; struct soctherm_throttle throttle[THROTTLE_SIZE]; struct tegra_tsensor_pmu_data *tshut_pmu_trip_data; }; #ifdef CONFIG_TEGRA_SOCTHERM int __init tegra11_soctherm_init(struct soctherm_platform_data *data); void tegra_soctherm_adjust_cpu_zone(bool high_voltage_range); void tegra_soctherm_adjust_core_zone(bool high_voltage_range); #else static inline int tegra11_soctherm_init(struct soctherm_platform_data *data) { return 0; } static inline void tegra_soctherm_adjust_cpu_zone(bool high_voltage_range) { } static inline void tegra_soctherm_adjust_core_zone(bool high_voltage_range) { } #endif #endif /* __MACH_TEGRA_11x_SOCTHERM_H */