/****************************************************************************/ /* * m525xsim.h -- ColdFire 525x System Integration Module support. * * (C) Copyright 2012, Steven king * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) */ /****************************************************************************/ #ifndef m525xsim_h #define m525xsim_h /****************************************************************************/ #define CPU_NAME "COLDFIRE(m525x)" #define CPU_INSTR_PER_JIFFY 3 #define MCF_BUSCLK (MCF_CLK / 2) #include /* * The 525x has a second MBAR region, define its address. */ #define MCF_MBAR2 0x80000000 /* * Define the 525x SIM register set addresses. */ #define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ #define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ #define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ #define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ #define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ #define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ #define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ #define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ #define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ #define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ #define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ #define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ #define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ #define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ #define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ #define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ #define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ #define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ #define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ #define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ #define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ #define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ #define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ #define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ #define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ #define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ #define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ #define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ #define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ #define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ #define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */ /* * Secondary Interrupt Controller (in MBAR2) */ #define MCFINTC2_INTBASE (MCF_MBAR2 + 0x168) /* Base Vector Reg */ #define MCFINTC2_INTPRI1 (MCF_MBAR2 + 0x140) /* 0-7 priority */ #define MCFINTC2_INTPRI2 (MCF_MBAR2 + 0x144) /* 8-15 priority */ #define MCFINTC2_INTPRI3 (MCF_MBAR2 + 0x148) /* 16-23 priority */ #define MCFINTC2_INTPRI4 (MCF_MBAR2 + 0x14c) /* 24-31 priority */ #define MCFINTC2_INTPRI5 (MCF_MBAR2 + 0x150) /* 32-39 priority */ #define MCFINTC2_INTPRI6 (MCF_MBAR2 + 0x154) /* 40-47 priority */ #define MCFINTC2_INTPRI7 (MCF_MBAR2 + 0x158) /* 48-55 priority */ #define MCFINTC2_INTPRI8 (MCF_MBAR2 + 0x15c) /* 56-63 priority */ #define MCFINTC2_INTPRI_REG(i) (MCFINTC2_INTPRI1 + \ ((((i) - MCFINTC2_VECBASE) / 8) * 4)) #define MCFINTC2_INTPRI_BITS(b, i) ((b) << (((i) % 8) * 4)) /* * Timer module. */ #define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ #define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ /* * UART module. */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ /* * QSPI module. */ #define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */ #define MCFQSPI_SIZE 0x40 /* Register set size */ #define MCFQSPI_CS0 15 #define MCFQSPI_CS1 16 #define MCFQSPI_CS2 24 #define MCFQSPI_CS3 28 /* * I2C module. */ #define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base addreess I2C0 */ #define MCFI2C_SIZE0 0x20 /* Register set size */ #define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */ #define MCFI2C_SIZE1 0x20 /* Register set size */ /* * DMA unit base addresses. */ #define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */ #define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */ #define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */ #define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */ /* * Some symbol defines for the above... */ #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ #define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */ #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ #define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ #define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */ /* * Define system peripheral IRQ usage. */ #define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */ #define MCF_IRQ_I2C0 29 #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_UART0 73 /* UART0 */ #define MCF_IRQ_UART1 74 /* UART1 */ /* * Define the base interrupt for the second interrupt controller. * We set it to 128, out of the way of the base interrupts, and plenty * of room for its 64 interrupts. */ #define MCFINTC2_VECBASE 128 #define MCF_IRQ_GPIO0 (MCFINTC2_VECBASE + 32) #define MCF_IRQ_GPIO1 (MCFINTC2_VECBASE + 33) #define MCF_IRQ_GPIO2 (MCFINTC2_VECBASE + 34) #define MCF_IRQ_GPIO3 (MCFINTC2_VECBASE + 35) #define MCF_IRQ_GPIO4 (MCFINTC2_VECBASE + 36) #define MCF_IRQ_GPIO5 (MCFINTC2_VECBASE + 37) #define MCF_IRQ_GPIO6 (MCFINTC2_VECBASE + 38) #define MCF_IRQ_USBWUP (MCFINTC2_VECBASE + 40) #define MCF_IRQ_I2C1 (MCFINTC2_VECBASE + 62) /* * General purpose IO registers (in MBAR2). */ #define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */ #define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */ #define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */ #define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */ #define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */ #define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */ #define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */ #define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */ #define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr status */ #define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */ #define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */ /* * Generic GPIO support */ #define MCFGPIO_PIN_MAX 64 #define MCFGPIO_IRQ_MAX 7 #define MCFGPIO_IRQ_VECBASE MCF_IRQ_GPIO0 /****************************************************************************/ #endif /* m525xsim_h */