/* * Copyright © 2006-2010 Intel Corporation * Copyright (c) 2006 Dave Airlie * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt * Dave Airlie * Jesse Barnes * Chris Wilson */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include "intel_drv.h" void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode, struct drm_display_mode *adjusted_mode) { drm_mode_copy(adjusted_mode, fixed_mode); drm_mode_set_crtcinfo(adjusted_mode, 0); } /** * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID * @dev: drm device * @fixed_mode : panel native mode * @connector: LVDS/eDP connector * * Return downclock_avail * Find the reduced downclock for LVDS/eDP in EDID. */ struct drm_display_mode * intel_find_panel_downclock(struct drm_device *dev, struct drm_display_mode *fixed_mode, struct drm_connector *connector) { struct drm_display_mode *scan, *tmp_mode; int temp_downclock; temp_downclock = fixed_mode->clock; tmp_mode = NULL; list_for_each_entry(scan, &connector->probed_modes, head) { /* * If one mode has the same resolution with the fixed_panel * mode while they have the different refresh rate, it means * that the reduced downclock is found. In such * case we can set the different FPx0/1 to dynamically select * between low and high frequency. */ if (scan->hdisplay == fixed_mode->hdisplay && scan->hsync_start == fixed_mode->hsync_start && scan->hsync_end == fixed_mode->hsync_end && scan->htotal == fixed_mode->htotal && scan->vdisplay == fixed_mode->vdisplay && scan->vsync_start == fixed_mode->vsync_start && scan->vsync_end == fixed_mode->vsync_end && scan->vtotal == fixed_mode->vtotal) { if (scan->clock < temp_downclock) { /* * The downclock is already found. But we * expect to find the lower downclock. */ temp_downclock = scan->clock; tmp_mode = scan; } } } if (temp_downclock < fixed_mode->clock) return drm_mode_duplicate(dev, tmp_mode); else return NULL; } /* adjusted_mode has been preset to be the panel's fixed mode */ void intel_pch_panel_fitting(struct intel_crtc *intel_crtc, struct intel_crtc_config *pipe_config, int fitting_mode) { struct drm_display_mode *adjusted_mode; int x, y, width, height; adjusted_mode = &pipe_config->adjusted_mode; x = y = width = height = 0; /* Native modes don't need fitting */ if (adjusted_mode->hdisplay == pipe_config->pipe_src_w && adjusted_mode->vdisplay == pipe_config->pipe_src_h) goto done; switch (fitting_mode) { case DRM_MODE_SCALE_CENTER: width = pipe_config->pipe_src_w; height = pipe_config->pipe_src_h; x = (adjusted_mode->hdisplay - width + 1)/2; y = (adjusted_mode->vdisplay - height + 1)/2; break; case DRM_MODE_SCALE_ASPECT: /* Scale but preserve the aspect ratio */ { u32 scaled_width = adjusted_mode->hdisplay * pipe_config->pipe_src_h; u32 scaled_height = pipe_config->pipe_src_w * adjusted_mode->vdisplay; if (scaled_width > scaled_height) { /* pillar */ width = scaled_height / pipe_config->pipe_src_h; if (width & 1) width++; x = (adjusted_mode->hdisplay - width + 1) / 2; y = 0; height = adjusted_mode->vdisplay; } else if (scaled_width < scaled_height) { /* letter */ height = scaled_width / pipe_config->pipe_src_w; if (height & 1) height++; y = (adjusted_mode->vdisplay - height + 1) / 2; x = 0; width = adjusted_mode->hdisplay; } else { x = y = 0; width = adjusted_mode->hdisplay; height = adjusted_mode->vdisplay; } } break; case DRM_MODE_SCALE_FULLSCREEN: x = y = 0; width = adjusted_mode->hdisplay; height = adjusted_mode->vdisplay; break; default: WARN(1, "bad panel fit mode: %d\n", fitting_mode); return; } done: pipe_config->pch_pfit.pos = (x << 16) | y; pipe_config->pch_pfit.size = (width << 16) | height; pipe_config->pch_pfit.enabled = pipe_config->pch_pfit.size != 0; } static void centre_horizontally(struct drm_display_mode *mode, int width) { u32 border, sync_pos, blank_width, sync_width; /* keep the hsync and hblank widths constant */ sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start; blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start; sync_pos = (blank_width - sync_width + 1) / 2; border = (mode->hdisplay - width + 1) / 2; border += border & 1; /* make the border even */ mode->crtc_hdisplay = width; mode->crtc_hblank_start = width + border; mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width; mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos; mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width; } static void centre_vertically(struct drm_display_mode *mode, int height) { u32 border, sync_pos, blank_width, sync_width; /* keep the vsync and vblank widths constant */ sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start; blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start; sync_pos = (blank_width - sync_width + 1) / 2; border = (mode->vdisplay - height + 1) / 2; mode->crtc_vdisplay = height; mode->crtc_vblank_start = height + border; mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width; mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos; mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width; } static inline u32 panel_fitter_scaling(u32 source, u32 target) { /* * Floating point operation is not supported. So the FACTOR * is defined, which can avoid the floating point computation * when calculating the panel ratio. */ #define ACCURACY 12 #define FACTOR (1 << ACCURACY) u32 ratio = source * FACTOR / target; return (FACTOR * ratio + FACTOR/2) / FACTOR; } static void i965_scale_aspect(struct intel_crtc_config *pipe_config, u32 *pfit_control) { struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; u32 scaled_width = adjusted_mode->hdisplay * pipe_config->pipe_src_h; u32 scaled_height = pipe_config->pipe_src_w * adjusted_mode->vdisplay; /* 965+ is easy, it does everything in hw */ if (scaled_width > scaled_height) *pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR; else if (scaled_width < scaled_height) *pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER; else if (adjusted_mode->hdisplay != pipe_config->pipe_src_w) *pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO; } static void i9xx_scale_aspect(struct intel_crtc_config *pipe_config, u32 *pfit_control, u32 *pfit_pgm_ratios, u32 *border) { struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; u32 scaled_width = adjusted_mode->hdisplay * pipe_config->pipe_src_h; u32 scaled_height = pipe_config->pipe_src_w * adjusted_mode->vdisplay; u32 bits; /* * For earlier chips we have to calculate the scaling * ratio by hand and program it into the * PFIT_PGM_RATIO register */ if (scaled_width > scaled_height) { /* pillar */ centre_horizontally(adjusted_mode, scaled_height / pipe_config->pipe_src_h); *border = LVDS_BORDER_ENABLE; if (pipe_config->pipe_src_h != adjusted_mode->vdisplay) { bits = panel_fitter_scaling(pipe_config->pipe_src_h, adjusted_mode->vdisplay); *pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT | bits << PFIT_VERT_SCALE_SHIFT); *pfit_control |= (PFIT_ENABLE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); } } else if (scaled_width < scaled_height) { /* letter */ centre_vertically(adjusted_mode, scaled_width / pipe_config->pipe_src_w); *border = LVDS_BORDER_ENABLE; if (pipe_config->pipe_src_w != adjusted_mode->hdisplay) { bits = panel_fitter_scaling(pipe_config->pipe_src_w, adjusted_mode->hdisplay); *pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT | bits << PFIT_VERT_SCALE_SHIFT); *pfit_control |= (PFIT_ENABLE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); } } else { /* Aspects match, Let hw scale both directions */ *pfit_control |= (PFIT_ENABLE | VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); } } void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc, struct intel_crtc_config *pipe_config, int fitting_mode) { struct drm_device *dev = intel_crtc->base.dev; u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0; struct drm_display_mode *adjusted_mode; adjusted_mode = &pipe_config->adjusted_mode; /* Native modes don't need fitting */ if (adjusted_mode->hdisplay == pipe_config->pipe_src_w && adjusted_mode->vdisplay == pipe_config->pipe_src_h) goto out; switch (fitting_mode) { case DRM_MODE_SCALE_CENTER: /* * For centered modes, we have to calculate border widths & * heights and modify the values programmed into the CRTC. */ centre_horizontally(adjusted_mode, pipe_config->pipe_src_w); centre_vertically(adjusted_mode, pipe_config->pipe_src_h); border = LVDS_BORDER_ENABLE; break; case DRM_MODE_SCALE_ASPECT: /* Scale but preserve the aspect ratio */ if (INTEL_INFO(dev)->gen >= 4) i965_scale_aspect(pipe_config, &pfit_control); else i9xx_scale_aspect(pipe_config, &pfit_control, &pfit_pgm_ratios, &border); break; case DRM_MODE_SCALE_FULLSCREEN: /* * Full scaling, even if it changes the aspect ratio. * Fortunately this is all done for us in hw. */ if (pipe_config->pipe_src_h != adjusted_mode->vdisplay || pipe_config->pipe_src_w != adjusted_mode->hdisplay) { pfit_control |= PFIT_ENABLE; if (INTEL_INFO(dev)->gen >= 4) pfit_control |= PFIT_SCALING_AUTO; else pfit_control |= (VERT_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_AUTO_SCALE | HORIZ_INTERP_BILINEAR); } break; default: WARN(1, "bad panel fit mode: %d\n", fitting_mode); return; } /* 965+ wants fuzzy fitting */ /* FIXME: handle multiple panels by failing gracefully */ if (INTEL_INFO(dev)->gen >= 4) pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) | PFIT_FILTER_FUZZY); /* Make sure pre-965 set dither correctly for 18bpp panels. */ if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18) pfit_control |= PANEL_8TO6_DITHER_ENABLE; out: if ((pfit_control & PFIT_ENABLE) == 0) { pfit_control = 0; pfit_pgm_ratios = 0; } pipe_config->gmch_pfit.control = pfit_control; pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios; pipe_config->gmch_pfit.lvds_border_bits = border; } enum drm_connector_status intel_panel_detect(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* Assume that the BIOS does not lie through the OpRegion... */ if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) { return ioread32(dev_priv->opregion.lid_state) & 0x1 ? connector_status_connected : connector_status_disconnected; } switch (i915.panel_ignore_lid) { case -2: return connector_status_connected; case -1: return connector_status_disconnected; default: return connector_status_unknown; } } static u32 intel_panel_compute_brightness(struct intel_connector *connector, u32 val) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; WARN_ON(panel->backlight.max == 0); if (i915.invert_brightness < 0) return val; if (i915.invert_brightness > 0 || dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) { return panel->backlight.max - val; } return val; } static u32 bdw_get_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(BLC_PWM_PCH_CTL2) & BACKLIGHT_DUTY_CYCLE_MASK; } static u32 pch_get_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; } static u32 i9xx_get_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 val; val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; if (INTEL_INFO(dev)->gen < 4) val >>= 1; if (panel->backlight.combination_mode) { u8 lbpc; pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc); val *= lbpc; } return val; } static u32 _vlv_get_backlight(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(VLV_BLC_PWM_CTL(pipe)) & BACKLIGHT_DUTY_CYCLE_MASK; } static u32 vlv_get_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; enum pipe pipe = intel_get_pipe_from_connector(connector); return _vlv_get_backlight(dev, pipe); } static u32 intel_panel_get_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 val; unsigned long flags; spin_lock_irqsave(&dev_priv->backlight_lock, flags); val = dev_priv->display.get_backlight(connector); val = intel_panel_compute_brightness(connector, val); spin_unlock_irqrestore(&dev_priv->backlight_lock, flags); DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val); return val; } static void bdw_set_backlight(struct intel_connector *connector, u32 level) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 val = I915_READ(BLC_PWM_PCH_CTL2) & ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(BLC_PWM_PCH_CTL2, val | level); } static void pch_set_backlight(struct intel_connector *connector, u32 level) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp; tmp = I915_READ(BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(BLC_PWM_CPU_CTL, tmp | level); } static void i9xx_set_backlight(struct intel_connector *connector, u32 level) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 tmp, mask; WARN_ON(panel->backlight.max == 0); if (panel->backlight.combination_mode) { u8 lbpc; lbpc = level * 0xfe / panel->backlight.max + 1; level /= lbpc; pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc); } if (IS_GEN4(dev)) { mask = BACKLIGHT_DUTY_CYCLE_MASK; } else { level <<= 1; mask = BACKLIGHT_DUTY_CYCLE_MASK_PNV; } tmp = I915_READ(BLC_PWM_CTL) & ~mask; I915_WRITE(BLC_PWM_CTL, tmp | level); } static void vlv_set_backlight(struct intel_connector *connector, u32 level) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; enum pipe pipe = intel_get_pipe_from_connector(connector); u32 tmp; tmp = I915_READ(VLV_BLC_PWM_CTL(pipe)) & ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(VLV_BLC_PWM_CTL(pipe), tmp | level); } static void intel_panel_actually_set_backlight(struct intel_connector *connector, u32 level) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level); level = intel_panel_compute_brightness(connector, level); dev_priv->display.set_backlight(connector, level); } /* set backlight brightness to level in range [0..max] */ void intel_panel_set_backlight(struct intel_connector *connector, u32 level, u32 max) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); u32 freq; unsigned long flags; u64 n; if (!panel->backlight.present || pipe == INVALID_PIPE) return; spin_lock_irqsave(&dev_priv->backlight_lock, flags); WARN_ON(panel->backlight.max == 0); /* scale to hardware max, but be careful to not overflow */ freq = panel->backlight.max; n = (u64)level * freq; do_div(n, max); level = n; panel->backlight.level = level; if (panel->backlight.device) panel->backlight.device->props.brightness = level; if (panel->backlight.enabled) intel_panel_actually_set_backlight(connector, level); spin_unlock_irqrestore(&dev_priv->backlight_lock, flags); } static void pch_disable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp; intel_panel_actually_set_backlight(connector, 0); tmp = I915_READ(BLC_PWM_CPU_CTL2); I915_WRITE(BLC_PWM_CPU_CTL2, tmp & ~BLM_PWM_ENABLE); tmp = I915_READ(BLC_PWM_PCH_CTL1); I915_WRITE(BLC_PWM_PCH_CTL1, tmp & ~BLM_PCH_PWM_ENABLE); } static void i9xx_disable_backlight(struct intel_connector *connector) { intel_panel_actually_set_backlight(connector, 0); } static void i965_disable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp; intel_panel_actually_set_backlight(connector, 0); tmp = I915_READ(BLC_PWM_CTL2); I915_WRITE(BLC_PWM_CTL2, tmp & ~BLM_PWM_ENABLE); } static void vlv_disable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; enum pipe pipe = intel_get_pipe_from_connector(connector); u32 tmp; intel_panel_actually_set_backlight(connector, 0); tmp = I915_READ(VLV_BLC_PWM_CTL2(pipe)); I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp & ~BLM_PWM_ENABLE); } void intel_panel_disable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); unsigned long flags; if (!panel->backlight.present || pipe == INVALID_PIPE) return; /* * Do not disable backlight on the vgaswitcheroo path. When switching * away from i915, the other client may depend on i915 to handle the * backlight. This will leave the backlight on unnecessarily when * another client is not activated. */ if (dev->switch_power_state == DRM_SWITCH_POWER_CHANGING) { DRM_DEBUG_DRIVER("Skipping backlight disable on vga switch\n"); return; } spin_lock_irqsave(&dev_priv->backlight_lock, flags); panel->backlight.enabled = false; dev_priv->display.disable_backlight(connector); spin_unlock_irqrestore(&dev_priv->backlight_lock, flags); } static void bdw_enable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 pch_ctl1, pch_ctl2; pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { DRM_DEBUG_KMS("pch backlight already enabled\n"); pch_ctl1 &= ~BLM_PCH_PWM_ENABLE; I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); } pch_ctl2 = panel->backlight.max << 16; I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2); pch_ctl1 = 0; if (panel->backlight.active_low_pwm) pch_ctl1 |= BLM_PCH_POLARITY; /* BDW always uses the pch pwm controls. */ pch_ctl1 |= BLM_PCH_OVERRIDE_ENABLE; I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); POSTING_READ(BLC_PWM_PCH_CTL1); I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE); /* This won't stick until the above enable. */ intel_panel_actually_set_backlight(connector, panel->backlight.level); } static void pch_enable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, pipe); u32 cpu_ctl2, pch_ctl1, pch_ctl2; cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2); if (cpu_ctl2 & BLM_PWM_ENABLE) { WARN(1, "cpu backlight already enabled\n"); cpu_ctl2 &= ~BLM_PWM_ENABLE; I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2); } pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { DRM_DEBUG_KMS("pch backlight already enabled\n"); pch_ctl1 &= ~BLM_PCH_PWM_ENABLE; I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); } if (cpu_transcoder == TRANSCODER_EDP) cpu_ctl2 = BLM_TRANSCODER_EDP; else cpu_ctl2 = BLM_PIPE(cpu_transcoder); I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2); POSTING_READ(BLC_PWM_CPU_CTL2); I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 | BLM_PWM_ENABLE); /* This won't stick until the above enable. */ intel_panel_actually_set_backlight(connector, panel->backlight.level); pch_ctl2 = panel->backlight.max << 16; I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2); pch_ctl1 = 0; if (panel->backlight.active_low_pwm) pch_ctl1 |= BLM_PCH_POLARITY; I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); POSTING_READ(BLC_PWM_PCH_CTL1); I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE); } static void i9xx_enable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 ctl, freq; ctl = I915_READ(BLC_PWM_CTL); if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) { WARN(1, "backlight already enabled\n"); I915_WRITE(BLC_PWM_CTL, 0); } freq = panel->backlight.max; if (panel->backlight.combination_mode) freq /= 0xff; ctl = freq << 17; if (panel->backlight.combination_mode) ctl |= BLM_LEGACY_MODE; if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm) ctl |= BLM_POLARITY_PNV; I915_WRITE(BLC_PWM_CTL, ctl); POSTING_READ(BLC_PWM_CTL); /* XXX: combine this into above write? */ intel_panel_actually_set_backlight(connector, panel->backlight.level); } static void i965_enable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); u32 ctl, ctl2, freq; ctl2 = I915_READ(BLC_PWM_CTL2); if (ctl2 & BLM_PWM_ENABLE) { WARN(1, "backlight already enabled\n"); ctl2 &= ~BLM_PWM_ENABLE; I915_WRITE(BLC_PWM_CTL2, ctl2); } freq = panel->backlight.max; if (panel->backlight.combination_mode) freq /= 0xff; ctl = freq << 16; I915_WRITE(BLC_PWM_CTL, ctl); /* XXX: combine this into above write? */ intel_panel_actually_set_backlight(connector, panel->backlight.level); ctl2 = BLM_PIPE(pipe); if (panel->backlight.combination_mode) ctl2 |= BLM_COMBINATION_MODE; if (panel->backlight.active_low_pwm) ctl2 |= BLM_POLARITY_I965; I915_WRITE(BLC_PWM_CTL2, ctl2); POSTING_READ(BLC_PWM_CTL2); I915_WRITE(BLC_PWM_CTL2, ctl2 | BLM_PWM_ENABLE); } static void vlv_enable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); u32 ctl, ctl2; ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe)); if (ctl2 & BLM_PWM_ENABLE) { WARN(1, "backlight already enabled\n"); ctl2 &= ~BLM_PWM_ENABLE; I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2); } ctl = panel->backlight.max << 16; I915_WRITE(VLV_BLC_PWM_CTL(pipe), ctl); /* XXX: combine this into above write? */ intel_panel_actually_set_backlight(connector, panel->backlight.level); ctl2 = 0; if (panel->backlight.active_low_pwm) ctl2 |= BLM_POLARITY_I965; I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2); POSTING_READ(VLV_BLC_PWM_CTL2(pipe)); I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2 | BLM_PWM_ENABLE); } void intel_panel_enable_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); unsigned long flags; if (!panel->backlight.present || pipe == INVALID_PIPE) return; DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe)); spin_lock_irqsave(&dev_priv->backlight_lock, flags); WARN_ON(panel->backlight.max == 0); if (panel->backlight.level == 0) { panel->backlight.level = panel->backlight.max; if (panel->backlight.device) panel->backlight.device->props.brightness = panel->backlight.level; } dev_priv->display.enable_backlight(connector); panel->backlight.enabled = true; spin_unlock_irqrestore(&dev_priv->backlight_lock, flags); } #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE) static int intel_backlight_device_update_status(struct backlight_device *bd) { struct intel_connector *connector = bl_get_data(bd); struct drm_device *dev = connector->base.dev; drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); DRM_DEBUG_KMS("updating intel_backlight, brightness=%d/%d\n", bd->props.brightness, bd->props.max_brightness); intel_panel_set_backlight(connector, bd->props.brightness, bd->props.max_brightness); drm_modeset_unlock(&dev->mode_config.connection_mutex); return 0; } static int intel_backlight_device_get_brightness(struct backlight_device *bd) { struct intel_connector *connector = bl_get_data(bd); struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; int ret; intel_runtime_pm_get(dev_priv); drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); ret = intel_panel_get_backlight(connector); drm_modeset_unlock(&dev->mode_config.connection_mutex); intel_runtime_pm_put(dev_priv); return ret; } static const struct backlight_ops intel_backlight_device_ops = { .update_status = intel_backlight_device_update_status, .get_brightness = intel_backlight_device_get_brightness, }; static int intel_backlight_device_register(struct intel_connector *connector) { struct intel_panel *panel = &connector->panel; struct backlight_properties props; if (WARN_ON(panel->backlight.device)) return -ENODEV; BUG_ON(panel->backlight.max == 0); memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_RAW; props.brightness = panel->backlight.level; props.max_brightness = panel->backlight.max; /* * Note: using the same name independent of the connector prevents * registration of multiple backlight devices in the driver. */ panel->backlight.device = backlight_device_register("intel_backlight", connector->base.kdev, connector, &intel_backlight_device_ops, &props); if (IS_ERR(panel->backlight.device)) { DRM_ERROR("Failed to register backlight: %ld\n", PTR_ERR(panel->backlight.device)); panel->backlight.device = NULL; return -ENODEV; } return 0; } static void intel_backlight_device_unregister(struct intel_connector *connector) { struct intel_panel *panel = &connector->panel; if (panel->backlight.device) { backlight_device_unregister(panel->backlight.device); panel->backlight.device = NULL; } } #else /* CONFIG_BACKLIGHT_CLASS_DEVICE */ static int intel_backlight_device_register(struct intel_connector *connector) { return 0; } static void intel_backlight_device_unregister(struct intel_connector *connector) { } #endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ /* * Note: The setup hooks can't assume pipe is set! * * XXX: Query mode clock or hardware clock and program PWM modulation frequency * appropriately when it's 0. Use VBT and/or sane defaults. */ static int bdw_setup_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 pch_ctl1, pch_ctl2, val; pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY; pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2); panel->backlight.max = pch_ctl2 >> 16; if (!panel->backlight.max) return -ENODEV; val = bdw_get_backlight(connector); panel->backlight.level = intel_panel_compute_brightness(connector, val); panel->backlight.enabled = (pch_ctl1 & BLM_PCH_PWM_ENABLE) && panel->backlight.level != 0; return 0; } static int pch_setup_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 cpu_ctl2, pch_ctl1, pch_ctl2, val; pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY; pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2); panel->backlight.max = pch_ctl2 >> 16; if (!panel->backlight.max) return -ENODEV; val = pch_get_backlight(connector); panel->backlight.level = intel_panel_compute_brightness(connector, val); cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2); panel->backlight.enabled = (cpu_ctl2 & BLM_PWM_ENABLE) && (pch_ctl1 & BLM_PCH_PWM_ENABLE) && panel->backlight.level != 0; return 0; } static int i9xx_setup_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 ctl, val; ctl = I915_READ(BLC_PWM_CTL); if (IS_GEN2(dev) || IS_I915GM(dev) || IS_I945GM(dev)) panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE; if (IS_PINEVIEW(dev)) panel->backlight.active_low_pwm = ctl & BLM_POLARITY_PNV; panel->backlight.max = ctl >> 17; if (panel->backlight.combination_mode) panel->backlight.max *= 0xff; if (!panel->backlight.max) return -ENODEV; val = i9xx_get_backlight(connector); panel->backlight.level = intel_panel_compute_brightness(connector, val); panel->backlight.enabled = panel->backlight.level != 0; return 0; } static int i965_setup_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; u32 ctl, ctl2, val; ctl2 = I915_READ(BLC_PWM_CTL2); panel->backlight.combination_mode = ctl2 & BLM_COMBINATION_MODE; panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965; ctl = I915_READ(BLC_PWM_CTL); panel->backlight.max = ctl >> 16; if (panel->backlight.combination_mode) panel->backlight.max *= 0xff; if (!panel->backlight.max) return -ENODEV; val = i9xx_get_backlight(connector); panel->backlight.level = intel_panel_compute_brightness(connector, val); panel->backlight.enabled = (ctl2 & BLM_PWM_ENABLE) && panel->backlight.level != 0; return 0; } static int vlv_setup_backlight(struct intel_connector *connector) { struct drm_device *dev = connector->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe; u32 ctl, ctl2, val; for_each_pipe(pipe) { u32 cur_val = I915_READ(VLV_BLC_PWM_CTL(pipe)); /* Skip if the modulation freq is already set */ if (cur_val & ~BACKLIGHT_DUTY_CYCLE_MASK) continue; cur_val &= BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(VLV_BLC_PWM_CTL(pipe), (0xf42 << 16) | cur_val); } ctl2 = I915_READ(VLV_BLC_PWM_CTL2(PIPE_A)); panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965; ctl = I915_READ(VLV_BLC_PWM_CTL(PIPE_A)); panel->backlight.max = ctl >> 16; if (!panel->backlight.max) return -ENODEV; val = _vlv_get_backlight(dev, PIPE_A); panel->backlight.level = intel_panel_compute_brightness(connector, val); panel->backlight.enabled = (ctl2 & BLM_PWM_ENABLE) && panel->backlight.level != 0; return 0; } int intel_panel_setup_backlight(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_connector *intel_connector = to_intel_connector(connector); struct intel_panel *panel = &intel_connector->panel; unsigned long flags; int ret; if (!dev_priv->vbt.backlight.present) { DRM_DEBUG_KMS("native backlight control not available per VBT\n"); return 0; } /* set level and max in panel struct */ spin_lock_irqsave(&dev_priv->backlight_lock, flags); ret = dev_priv->display.setup_backlight(intel_connector); spin_unlock_irqrestore(&dev_priv->backlight_lock, flags); if (ret) { DRM_DEBUG_KMS("failed to setup backlight for connector %s\n", connector->name); return ret; } intel_backlight_device_register(intel_connector); panel->backlight.present = true; DRM_DEBUG_KMS("backlight initialized, %s, brightness %u/%u, " "sysfs interface %sregistered\n", panel->backlight.enabled ? "enabled" : "disabled", panel->backlight.level, panel->backlight.max, panel->backlight.device ? "" : "not "); return 0; } void intel_panel_destroy_backlight(struct drm_connector *connector) { struct intel_connector *intel_connector = to_intel_connector(connector); struct intel_panel *panel = &intel_connector->panel; panel->backlight.present = false; intel_backlight_device_unregister(intel_connector); } /* Set up chip specific backlight functions */ void intel_panel_init_backlight_funcs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (IS_BROADWELL(dev)) { dev_priv->display.setup_backlight = bdw_setup_backlight; dev_priv->display.enable_backlight = bdw_enable_backlight; dev_priv->display.disable_backlight = pch_disable_backlight; dev_priv->display.set_backlight = bdw_set_backlight; dev_priv->display.get_backlight = bdw_get_backlight; } else if (HAS_PCH_SPLIT(dev)) { dev_priv->display.setup_backlight = pch_setup_backlight; dev_priv->display.enable_backlight = pch_enable_backlight; dev_priv->display.disable_backlight = pch_disable_backlight; dev_priv->display.set_backlight = pch_set_backlight; dev_priv->display.get_backlight = pch_get_backlight; } else if (IS_VALLEYVIEW(dev)) { dev_priv->display.setup_backlight = vlv_setup_backlight; dev_priv->display.enable_backlight = vlv_enable_backlight; dev_priv->display.disable_backlight = vlv_disable_backlight; dev_priv->display.set_backlight = vlv_set_backlight; dev_priv->display.get_backlight = vlv_get_backlight; } else if (IS_GEN4(dev)) { dev_priv->display.setup_backlight = i965_setup_backlight; dev_priv->display.enable_backlight = i965_enable_backlight; dev_priv->display.disable_backlight = i965_disable_backlight; dev_priv->display.set_backlight = i9xx_set_backlight; dev_priv->display.get_backlight = i9xx_get_backlight; } else { dev_priv->display.setup_backlight = i9xx_setup_backlight; dev_priv->display.enable_backlight = i9xx_enable_backlight; dev_priv->display.disable_backlight = i9xx_disable_backlight; dev_priv->display.set_backlight = i9xx_set_backlight; dev_priv->display.get_backlight = i9xx_get_backlight; } } int intel_panel_init(struct intel_panel *panel, struct drm_display_mode *fixed_mode, struct drm_display_mode *downclock_mode) { panel->fixed_mode = fixed_mode; panel->downclock_mode = downclock_mode; return 0; } void intel_panel_fini(struct intel_panel *panel) { struct intel_connector *intel_connector = container_of(panel, struct intel_connector, panel); if (panel->fixed_mode) drm_mode_destroy(intel_connector->base.dev, panel->fixed_mode); if (panel->downclock_mode) drm_mode_destroy(intel_connector->base.dev, panel->downclock_mode); }