/* * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM * * * Copyright (C) 2007 Trent Piepho * * Copyright (C) 2005 Kirk Lapray * * Based on code from Jack Kelliher (kelliher@xmission.com) * Copyright (C) 2002 & pcHDTV, inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ /* * This driver needs two external firmware files. Please copy * "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to * /usr/lib/hotplug/firmware/ or /lib/firmware/ * (depending on configuration of firmware hotplug). */ #define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw" #define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw" #include #include #include #include #include #include #include #include "dvb_math.h" #include "dvb_frontend.h" #include "or51132.h" static int debug; #define dprintk(args...) \ do { \ if (debug) printk(KERN_DEBUG "or51132: " args); \ } while (0) struct or51132_state { struct i2c_adapter* i2c; /* Configuration settings */ const struct or51132_config* config; struct dvb_frontend frontend; /* Demodulator private data */ fe_modulation_t current_modulation; u32 snr; /* Result of last SNR calculation */ /* Tuner private data */ u32 current_frequency; }; /* Write buffer to demod */ static int or51132_writebuf(struct or51132_state *state, const u8 *buf, int len) { int err; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = (u8*)buf, .len = len }; /* msleep(20); */ /* doesn't appear to be necessary */ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { printk(KERN_WARNING "or51132: I2C write (addr 0x%02x len %d) error: %d\n", msg.addr, msg.len, err); return -EREMOTEIO; } return 0; } /* Write constant bytes, e.g. or51132_writebytes(state, 0x04, 0x42, 0x00); Less code and more efficient that loading a buffer on the stack with the bytes to send and then calling or51132_writebuf() on that. */ #define or51132_writebytes(state, data...) \ ({ static const u8 _data[] = {data}; \ or51132_writebuf(state, _data, sizeof(_data)); }) /* Read data from demod into buffer. Returns 0 on success. */ static int or51132_readbuf(struct or51132_state *state, u8 *buf, int len) { int err; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len }; /* msleep(20); */ /* doesn't appear to be necessary */ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { printk(KERN_WARNING "or51132: I2C read (addr 0x%02x len %d) error: %d\n", msg.addr, msg.len, err); return -EREMOTEIO; } return 0; } /* Reads a 16-bit demod register. Returns <0 on error. */ static int or51132_readreg(struct or51132_state *state, u8 reg) { u8 buf[2] = { 0x04, reg }; struct i2c_msg msg[2] = { {.addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }, {.addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = 2 }}; int err; if ((err = i2c_transfer(state->i2c, msg, 2)) != 2) { printk(KERN_WARNING "or51132: I2C error reading register %d: %d\n", reg, err); return -EREMOTEIO; } return buf[0] | (buf[1] << 8); } static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) { struct or51132_state* state = fe->demodulator_priv; static const u8 run_buf[] = {0x7F,0x01}; u8 rec_buf[8]; u32 firmwareAsize, firmwareBsize; int i,ret; dprintk("Firmware is %Zd bytes\n",fw->size); /* Get size of firmware A and B */ firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); dprintk("FirmwareA is %i bytes\n",firmwareAsize); firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); dprintk("FirmwareB is %i bytes\n",firmwareBsize); /* Upload firmware */ if ((ret = or51132_writebuf(state, &fw->data[8], firmwareAsize))) { printk(KERN_WARNING "or51132: load_firmware error 1\n"); return ret; } if ((ret = or51132_writebuf(state, &fw->data[8+firmwareAsize], firmwareBsize))) { printk(KERN_WARNING "or51132: load_firmware error 2\n"); return ret; } if ((ret = or51132_writebuf(state, run_buf, 2))) { printk(KERN_WARNING "or51132: load_firmware error 3\n"); return ret; } if ((ret = or51132_writebuf(state, run_buf, 2))) { printk(KERN_WARNING "or51132: load_firmware error 4\n"); return ret; } /* 50ms for operation to begin */ msleep(50); /* Read back ucode version to besure we loaded correctly and are really up and running */ /* Get uCode version */ if ((ret = or51132_writebytes(state, 0x10, 0x10, 0x00))) { printk(KERN_WARNING "or51132: load_firmware error a\n"); return ret; } if ((ret = or51132_writebytes(state, 0x04, 0x17))) { printk(KERN_WARNING "or51132: load_firmware error b\n"); return ret; } if ((ret = or51132_writebytes(state, 0x00, 0x00))) { printk(KERN_WARNING "or51132: load_firmware error c\n"); return ret; } for (i=0;i<4;i++) { /* Once upon a time, this command might have had something to do with getting the firmware version, but it's not used anymore: {0x04,0x00,0x30,0x00,i+1} */ /* Read 8 bytes, two bytes at a time */ if ((ret = or51132_readbuf(state, &rec_buf[i*2], 2))) { printk(KERN_WARNING "or51132: load_firmware error d - %d\n",i); return ret; } } printk(KERN_WARNING "or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n", rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2], rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6], rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f, rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f); if ((ret = or51132_writebytes(state, 0x10, 0x00, 0x00))) { printk(KERN_WARNING "or51132: load_firmware error e\n"); return ret; } return 0; }; static int or51132_init(struct dvb_frontend* fe) { return 0; } static int or51132_read_ber(struct dvb_frontend* fe, u32* ber) { *ber = 0; return 0; } static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { *ucblocks = 0; return 0; } static int or51132_sleep(struct dvb_frontend* fe) { return 0; } static int or51132_setmode(struct dvb_frontend* fe) { struct or51132_state* state = fe->demodulator_priv; u8 cmd_buf1[3] = {0x04, 0x01, 0x5f}; u8 cmd_buf2[3] = {0x1c, 0x00, 0 }; dprintk("setmode %d\n",(int)state->current_modulation); switch (state->current_modulation) { case VSB_8: /* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high */ cmd_buf1[2] = 0x50; /* REC MODE inv IF spectrum, Normal */ cmd_buf2[1] = 0x03; /* Channel MODE ATSC/VSB8 */ cmd_buf2[2] = 0x06; break; /* All QAM modes are: Auto-deinterleave; MPEGser, MPEG2tr, phase noise-high REC MODE Normal Carrier Lock */ case QAM_AUTO: /* Channel MODE Auto QAM64/256 */ cmd_buf2[2] = 0x4f; break; case QAM_256: /* Channel MODE QAM256 */ cmd_buf2[2] = 0x45; break; case QAM_64: /* Channel MODE QAM64 */ cmd_buf2[2] = 0x43; break; default: printk(KERN_WARNING "or51132: setmode: Modulation set to unsupported value (%d)\n", state->current_modulation); return -EINVAL; } /* Set Receiver 1 register */ if (or51132_writebuf(state, cmd_buf1, 3)) { printk(KERN_WARNING "or51132: set_mode error 1\n"); return -EREMOTEIO; } dprintk("set #1 to %02x\n", cmd_buf1[2]); /* Set operation mode in Receiver 6 register */ if (or51132_writebuf(state, cmd_buf2, 3)) { printk(KERN_WARNING "or51132: set_mode error 2\n"); return -EREMOTEIO; } dprintk("set #6 to 0x%02x%02x\n", cmd_buf2[1], cmd_buf2[2]); return 0; } /* Some modulations use the same firmware. This classifies modulations by the firmware they use. */ #define MOD_FWCLASS_UNKNOWN 0 #define MOD_FWCLASS_VSB 1 #define MOD_FWCLASS_QAM 2 static int modulation_fw_class(fe_modulation_t modulation) { switch(modulation) { case VSB_8: return MOD_FWCLASS_VSB; case QAM_AUTO: case QAM_64: case QAM_256: return MOD_FWCLASS_QAM; default: return MOD_FWCLASS_UNKNOWN; } } static int or51132_set_parameters(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; int ret; struct or51132_state* state = fe->demodulator_priv; const struct firmware *fw; const char *fwname; int clock_mode; /* Upload new firmware only if we need a different one */ if (modulation_fw_class(state->current_modulation) != modulation_fw_class(p->modulation)) { switch (modulation_fw_class(p->modulation)) { case MOD_FWCLASS_VSB: dprintk("set_parameters VSB MODE\n"); fwname = OR51132_VSB_FIRMWARE; /* Set non-punctured clock for VSB */ clock_mode = 0; break; case MOD_FWCLASS_QAM: dprintk("set_parameters QAM MODE\n"); fwname = OR51132_QAM_FIRMWARE; /* Set punctured clock for QAM */ clock_mode = 1; break; default: printk("or51132: Modulation type(%d) UNSUPPORTED\n", p->modulation); return -1; } printk("or51132: Waiting for firmware upload(%s)...\n", fwname); ret = request_firmware(&fw, fwname, state->i2c->dev.parent); if (ret) { printk(KERN_WARNING "or51132: No firmware up" "loaded(timeout or file not found?)\n"); return ret; } ret = or51132_load_firmware(fe, fw); release_firmware(fw); if (ret) { printk(KERN_WARNING "or51132: Writing firmware to " "device failed!\n"); return ret; } printk("or51132: Firmware upload complete.\n"); state->config->set_ts_params(fe, clock_mode); } /* Change only if we are actually changing the modulation */ if (state->current_modulation != p->modulation) { state->current_modulation = p->modulation; or51132_setmode(fe); } if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); } /* Set to current mode */ or51132_setmode(fe); /* Update current frequency */ state->current_frequency = p->frequency; return 0; } static int or51132_get_parameters(struct dvb_frontend* fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct or51132_state* state = fe->demodulator_priv; int status; int retry = 1; start: /* Receiver Status */ if ((status = or51132_readreg(state, 0x00)) < 0) { printk(KERN_WARNING "or51132: get_parameters: error reading receiver status\n"); return -EREMOTEIO; } switch(status&0xff) { case 0x06: p->modulation = VSB_8; break; case 0x43: p->modulation = QAM_64; break; case 0x45: p->modulation = QAM_256; break; default: if (retry--) goto start; printk(KERN_WARNING "or51132: unknown status 0x%02x\n", status&0xff); return -EREMOTEIO; } /* FIXME: Read frequency from frontend, take AFC into account */ p->frequency = state->current_frequency; /* FIXME: How to read inversion setting? Receiver 6 register? */ p->inversion = INVERSION_AUTO; return 0; } static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status) { struct or51132_state* state = fe->demodulator_priv; int reg; /* Receiver Status */ if ((reg = or51132_readreg(state, 0x00)) < 0) { printk(KERN_WARNING "or51132: read_status: error reading receiver status: %d\n", reg); *status = 0; return -EREMOTEIO; } dprintk("%s: read_status %04x\n", __func__, reg); if (reg & 0x0100) /* Receiver Lock */ *status = FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI| FE_HAS_SYNC|FE_HAS_LOCK; else *status = 0; return 0; } /* Calculate SNR estimation (scaled by 2^24) 8-VSB SNR and QAM equations from Oren datasheets For 8-VSB: SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) - K Where K = 0 if NTSC rejection filter is OFF; and K = 3 if NTSC rejection filter is ON For QAM64: SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) For QAM256: SNR[dB] = 10 * log10(907832426.314266 / MSE^2 ) We re-write the snr equation as: SNR * 2^24 = 10*(c - 2*intlog10(MSE)) Where for QAM256, c = log10(907832426.314266) * 2^24 and for 8-VSB and QAM64, c = log10(897152044.8282) * 2^24 */ static u32 calculate_snr(u32 mse, u32 c) { if (mse == 0) /* No signal */ return 0; mse = 2*intlog10(mse); if (mse > c) { /* Negative SNR, which is possible, but realisticly the demod will lose lock before the signal gets this bad. The API only allows for unsigned values, so just return 0 */ return 0; } return 10*(c - mse); } static int or51132_read_snr(struct dvb_frontend* fe, u16* snr) { struct or51132_state* state = fe->demodulator_priv; int noise, reg; u32 c, usK = 0; int retry = 1; start: /* SNR after Equalizer */ noise = or51132_readreg(state, 0x02); if (noise < 0) { printk(KERN_WARNING "or51132: read_snr: error reading equalizer\n"); return -EREMOTEIO; } dprintk("read_snr noise (%d)\n", noise); /* Read status, contains modulation type for QAM_AUTO and NTSC filter for VSB */ reg = or51132_readreg(state, 0x00); if (reg < 0) { printk(KERN_WARNING "or51132: read_snr: error reading receiver status\n"); return -EREMOTEIO; } switch (reg&0xff) { case 0x06: if (reg & 0x1000) usK = 3 << 24; /* Fall through to QAM64 case */ case 0x43: c = 150204167; break; case 0x45: c = 150290396; break; default: printk(KERN_WARNING "or51132: unknown status 0x%02x\n", reg&0xff); if (retry--) goto start; return -EREMOTEIO; } dprintk("%s: modulation %02x, NTSC rej O%s\n", __func__, reg&0xff, reg&0x1000?"n":"ff"); /* Calculate SNR using noise, c, and NTSC rejection correction */ state->snr = calculate_snr(noise, c) - usK; *snr = (state->snr) >> 16; dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; } static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) { /* Calculate Strength from SNR up to 35dB */ /* Even though the SNR can go higher than 35dB, there is some comfort */ /* factor in having a range of strong signals that can show at 100% */ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; u16 snr; int ret; ret = fe->ops.read_snr(fe, &snr); if (ret != 0) return ret; /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ /* scale the range 0 - 35*2^24 into 0 - 65535 */ if (state->snr >= 8960 * 0x10000) *strength = 0xffff; else *strength = state->snr / 8960; return 0; } static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) { fe_tune_settings->min_delay_ms = 500; fe_tune_settings->step_size = 0; fe_tune_settings->max_drift = 0; return 0; } static void or51132_release(struct dvb_frontend* fe) { struct or51132_state* state = fe->demodulator_priv; kfree(state); } static struct dvb_frontend_ops or51132_ops; struct dvb_frontend* or51132_attach(const struct or51132_config* config, struct i2c_adapter* i2c) { struct or51132_state* state = NULL; /* Allocate memory for the internal state */ state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL); if (state == NULL) return NULL; /* Setup the state */ state->config = config; state->i2c = i2c; state->current_frequency = -1; state->current_modulation = -1; /* Create dvb_frontend */ memcpy(&state->frontend.ops, &or51132_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; } static struct dvb_frontend_ops or51132_ops = { .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, .info = { .name = "Oren OR51132 VSB/QAM Frontend", .type = FE_ATSC, .frequency_min = 44000000, .frequency_max = 958000000, .frequency_stepsize = 166666, .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO | FE_CAN_8VSB }, .release = or51132_release, .init = or51132_init, .sleep = or51132_sleep, .set_frontend = or51132_set_parameters, .get_frontend = or51132_get_parameters, .get_tune_settings = or51132_get_tune_settings, .read_status = or51132_read_status, .read_ber = or51132_read_ber, .read_signal_strength = or51132_read_signal_strength, .read_snr = or51132_read_snr, .read_ucblocks = or51132_read_ucblocks, }; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver"); MODULE_AUTHOR("Kirk Lapray"); MODULE_AUTHOR("Trent Piepho"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(or51132_attach); /* * Local variables: * c-basic-offset: 8 * End: */