/* Intel PRO/1000 Linux driver * Copyright(c) 1999 - 2014 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * The full GNU General Public License is included in this distribution in * the file called "COPYING". * * Contact Information: * Linux NICS * e1000-devel Mailing List * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "e1000.h" #define DRV_EXTRAVERSION "-k" #define DRV_VERSION "2.3.2" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); static const struct e1000_info *e1000_info_tbl[] = { [board_82571] = &e1000_82571_info, [board_82572] = &e1000_82572_info, [board_82573] = &e1000_82573_info, [board_82574] = &e1000_82574_info, [board_82583] = &e1000_82583_info, [board_80003es2lan] = &e1000_es2_info, [board_ich8lan] = &e1000_ich8_info, [board_ich9lan] = &e1000_ich9_info, [board_ich10lan] = &e1000_ich10_info, [board_pchlan] = &e1000_pch_info, [board_pch2lan] = &e1000_pch2_info, [board_pch_lpt] = &e1000_pch_lpt_info, [board_pch_spt] = &e1000_pch_spt_info, }; struct e1000_reg_info { u32 ofs; char *name; }; static const struct e1000_reg_info e1000_reg_info_tbl[] = { /* General Registers */ {E1000_CTRL, "CTRL"}, {E1000_STATUS, "STATUS"}, {E1000_CTRL_EXT, "CTRL_EXT"}, /* Interrupt Registers */ {E1000_ICR, "ICR"}, /* Rx Registers */ {E1000_RCTL, "RCTL"}, {E1000_RDLEN(0), "RDLEN"}, {E1000_RDH(0), "RDH"}, {E1000_RDT(0), "RDT"}, {E1000_RDTR, "RDTR"}, {E1000_RXDCTL(0), "RXDCTL"}, {E1000_ERT, "ERT"}, {E1000_RDBAL(0), "RDBAL"}, {E1000_RDBAH(0), "RDBAH"}, {E1000_RDFH, "RDFH"}, {E1000_RDFT, "RDFT"}, {E1000_RDFHS, "RDFHS"}, {E1000_RDFTS, "RDFTS"}, {E1000_RDFPC, "RDFPC"}, /* Tx Registers */ {E1000_TCTL, "TCTL"}, {E1000_TDBAL(0), "TDBAL"}, {E1000_TDBAH(0), "TDBAH"}, {E1000_TDLEN(0), "TDLEN"}, {E1000_TDH(0), "TDH"}, {E1000_TDT(0), "TDT"}, {E1000_TIDV, "TIDV"}, {E1000_TXDCTL(0), "TXDCTL"}, {E1000_TADV, "TADV"}, {E1000_TARC(0), "TARC"}, {E1000_TDFH, "TDFH"}, {E1000_TDFT, "TDFT"}, {E1000_TDFHS, "TDFHS"}, {E1000_TDFTS, "TDFTS"}, {E1000_TDFPC, "TDFPC"}, /* List Terminator */ {0, NULL} }; /** * __ew32_prepare - prepare to write to MAC CSR register on certain parts * @hw: pointer to the HW structure * * When updating the MAC CSR registers, the Manageability Engine (ME) could * be accessing the registers at the same time. Normally, this is handled in * h/w by an arbiter but on some parts there is a bug that acknowledges Host * accesses later than it should which could result in the register to have * an incorrect value. Workaround this by checking the FWSM register which * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set * and try again a number of times. **/ s32 __ew32_prepare(struct e1000_hw *hw) { s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT; while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i) udelay(50); return i; } void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) { if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) __ew32_prepare(hw); writel(val, hw->hw_addr + reg); } /** * e1000_regdump - register printout routine * @hw: pointer to the HW structure * @reginfo: pointer to the register info table **/ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) { int n = 0; char rname[16]; u32 regs[8]; switch (reginfo->ofs) { case E1000_RXDCTL(0): for (n = 0; n < 2; n++) regs[n] = __er32(hw, E1000_RXDCTL(n)); break; case E1000_TXDCTL(0): for (n = 0; n < 2; n++) regs[n] = __er32(hw, E1000_TXDCTL(n)); break; case E1000_TARC(0): for (n = 0; n < 2; n++) regs[n] = __er32(hw, E1000_TARC(n)); break; default: pr_info("%-15s %08x\n", reginfo->name, __er32(hw, reginfo->ofs)); return; } snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]"); pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]); } static void e1000e_dump_ps_pages(struct e1000_adapter *adapter, struct e1000_buffer *bi) { int i; struct e1000_ps_page *ps_page; for (i = 0; i < adapter->rx_ps_pages; i++) { ps_page = &bi->ps_pages[i]; if (ps_page->page) { pr_info("packet dump for ps_page %d:\n", i); print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, page_address(ps_page->page), PAGE_SIZE, true); } } } /** * e1000e_dump - Print registers, Tx-ring and Rx-ring * @adapter: board private structure **/ static void e1000e_dump(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; struct e1000_reg_info *reginfo; struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_tx_desc *tx_desc; struct my_u0 { __le64 a; __le64 b; } *u0; struct e1000_buffer *buffer_info; struct e1000_ring *rx_ring = adapter->rx_ring; union e1000_rx_desc_packet_split *rx_desc_ps; union e1000_rx_desc_extended *rx_desc; struct my_u1 { __le64 a; __le64 b; __le64 c; __le64 d; } *u1; u32 staterr; int i = 0; if (!netif_msg_hw(adapter)) return; /* Print netdevice Info */ if (netdev) { dev_info(&adapter->pdev->dev, "Net device Info\n"); pr_info("Device Name state trans_start last_rx\n"); pr_info("%-15s %016lX %016lX %016lX\n", netdev->name, netdev->state, netdev->trans_start, netdev->last_rx); } /* Print Registers */ dev_info(&adapter->pdev->dev, "Register Dump\n"); pr_info(" Register Name Value\n"); for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl; reginfo->name; reginfo++) { e1000_regdump(hw, reginfo); } /* Print Tx Ring Summary */ if (!netdev || !netif_running(netdev)) return; dev_info(&adapter->pdev->dev, "Tx Ring Summary\n"); pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n"); buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean]; pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n", 0, tx_ring->next_to_use, tx_ring->next_to_clean, (unsigned long long)buffer_info->dma, buffer_info->length, buffer_info->next_to_watch, (unsigned long long)buffer_info->time_stamp); /* Print Tx Ring */ if (!netif_msg_tx_done(adapter)) goto rx_ring_summary; dev_info(&adapter->pdev->dev, "Tx Ring Dump\n"); /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended) * * Legacy Transmit Descriptor * +--------------------------------------------------------------+ * 0 | Buffer Address [63:0] (Reserved on Write Back) | * +--------------------------------------------------------------+ * 8 | Special | CSS | Status | CMD | CSO | Length | * +--------------------------------------------------------------+ * 63 48 47 36 35 32 31 24 23 16 15 0 * * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload * 63 48 47 40 39 32 31 16 15 8 7 0 * +----------------------------------------------------------------+ * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS | * +----------------------------------------------------------------+ * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN | * +----------------------------------------------------------------+ * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 * * Extended Data Descriptor (DTYP=0x1) * +----------------------------------------------------------------+ * 0 | Buffer Address [63:0] | * +----------------------------------------------------------------+ * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN | * +----------------------------------------------------------------+ * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 */ pr_info("Tl[desc] [address 63:0 ] [SpeCssSCmCsLen] [bi->dma ] leng ntw timestamp bi->skb <-- Legacy format\n"); pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Context format\n"); pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Data format\n"); for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { const char *next_desc; tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; u0 = (struct my_u0 *)tx_desc; if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean) next_desc = " NTC/U"; else if (i == tx_ring->next_to_use) next_desc = " NTU"; else if (i == tx_ring->next_to_clean) next_desc = " NTC"; else next_desc = ""; pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n", (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' : ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i, (unsigned long long)le64_to_cpu(u0->a), (unsigned long long)le64_to_cpu(u0->b), (unsigned long long)buffer_info->dma, buffer_info->length, buffer_info->next_to_watch, (unsigned long long)buffer_info->time_stamp, buffer_info->skb, next_desc); if (netif_msg_pktdata(adapter) && buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, buffer_info->skb->data, buffer_info->skb->len, true); } /* Print Rx Ring Summary */ rx_ring_summary: dev_info(&adapter->pdev->dev, "Rx Ring Summary\n"); pr_info("Queue [NTU] [NTC]\n"); pr_info(" %5d %5X %5X\n", 0, rx_ring->next_to_use, rx_ring->next_to_clean); /* Print Rx Ring */ if (!netif_msg_rx_status(adapter)) return; dev_info(&adapter->pdev->dev, "Rx Ring Dump\n"); switch (adapter->rx_ps_pages) { case 1: case 2: case 3: /* [Extended] Packet Split Receive Descriptor Format * * +-----------------------------------------------------+ * 0 | Buffer Address 0 [63:0] | * +-----------------------------------------------------+ * 8 | Buffer Address 1 [63:0] | * +-----------------------------------------------------+ * 16 | Buffer Address 2 [63:0] | * +-----------------------------------------------------+ * 24 | Buffer Address 3 [63:0] | * +-----------------------------------------------------+ */ pr_info("R [desc] [buffer 0 63:0 ] [buffer 1 63:0 ] [buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] [bi->skb] <-- Ext Pkt Split format\n"); /* [Extended] Receive Descriptor (Write-Back) Format * * 63 48 47 32 31 13 12 8 7 4 3 0 * +------------------------------------------------------+ * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS | * | Checksum | Ident | | Queue | | Type | * +------------------------------------------------------+ * 8 | VLAN Tag | Length | Extended Error | Extended Status | * +------------------------------------------------------+ * 63 48 47 32 31 20 19 0 */ pr_info("RWB[desc] [ck ipid mrqhsh] [vl l0 ee es] [ l3 l2 l1 hs] [reserved ] ---------------- [bi->skb] <-- Ext Rx Write-Back format\n"); for (i = 0; i < rx_ring->count; i++) { const char *next_desc; buffer_info = &rx_ring->buffer_info[i]; rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i); u1 = (struct my_u1 *)rx_desc_ps; staterr = le32_to_cpu(rx_desc_ps->wb.middle.status_error); if (i == rx_ring->next_to_use) next_desc = " NTU"; else if (i == rx_ring->next_to_clean) next_desc = " NTC"; else next_desc = ""; if (staterr & E1000_RXD_STAT_DD) { /* Descriptor Done */ pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX ---------------- %p%s\n", "RWB", i, (unsigned long long)le64_to_cpu(u1->a), (unsigned long long)le64_to_cpu(u1->b), (unsigned long long)le64_to_cpu(u1->c), (unsigned long long)le64_to_cpu(u1->d), buffer_info->skb, next_desc); } else { pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX %016llX %p%s\n", "R ", i, (unsigned long long)le64_to_cpu(u1->a), (unsigned long long)le64_to_cpu(u1->b), (unsigned long long)le64_to_cpu(u1->c), (unsigned long long)le64_to_cpu(u1->d), (unsigned long long)buffer_info->dma, buffer_info->skb, next_desc); if (netif_msg_pktdata(adapter)) e1000e_dump_ps_pages(adapter, buffer_info); } } break; default: case 0: /* Extended Receive Descriptor (Read) Format * * +-----------------------------------------------------+ * 0 | Buffer Address [63:0] | * +-----------------------------------------------------+ * 8 | Reserved | * +-----------------------------------------------------+ */ pr_info("R [desc] [buf addr 63:0 ] [reserved 63:0 ] [bi->dma ] [bi->skb] <-- Ext (Read) format\n"); /* Extended Receive Descriptor (Write-Back) Format * * 63 48 47 32 31 24 23 4 3 0 * +------------------------------------------------------+ * | RSS Hash | | | | * 0 +-------------------+ Rsvd | Reserved | MRQ RSS | * | Packet | IP | | | Type | * | Checksum | Ident | | | | * +------------------------------------------------------+ * 8 | VLAN Tag | Length | Extended Error | Extended Status | * +------------------------------------------------------+ * 63 48 47 32 31 20 19 0 */ pr_info("RWB[desc] [cs ipid mrq] [vt ln xe xs] [bi->skb] <-- Ext (Write-Back) format\n"); for (i = 0; i < rx_ring->count; i++) { const char *next_desc; buffer_info = &rx_ring->buffer_info[i]; rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); u1 = (struct my_u1 *)rx_desc; staterr = le32_to_cpu(rx_desc->wb.upper.status_error); if (i == rx_ring->next_to_use) next_desc = " NTU"; else if (i == rx_ring->next_to_clean) next_desc = " NTC"; else next_desc = ""; if (staterr & E1000_RXD_STAT_DD) { /* Descriptor Done */ pr_info("%s[0x%03X] %016llX %016llX ---------------- %p%s\n", "RWB", i, (unsigned long long)le64_to_cpu(u1->a), (unsigned long long)le64_to_cpu(u1->b), buffer_info->skb, next_desc); } else { pr_info("%s[0x%03X] %016llX %016llX %016llX %p%s\n", "R ", i, (unsigned long long)le64_to_cpu(u1->a), (unsigned long long)le64_to_cpu(u1->b), (unsigned long long)buffer_info->dma, buffer_info->skb, next_desc); if (netif_msg_pktdata(adapter) && buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, buffer_info->skb->data, adapter->rx_buffer_len, true); } } } } /** * e1000_desc_unused - calculate if we have unused descriptors **/ static int e1000_desc_unused(struct e1000_ring *ring) { if (ring->next_to_clean > ring->next_to_use) return ring->next_to_clean - ring->next_to_use - 1; return ring->count + ring->next_to_clean - ring->next_to_use - 1; } /** * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp * @adapter: board private structure * @hwtstamps: time stamp structure to update * @systim: unsigned 64bit system time value. * * Convert the system time value stored in the RX/TXSTMP registers into a * hwtstamp which can be used by the upper level time stamping functions. * * The 'systim_lock' spinlock is used to protect the consistency of the * system time value. This is needed because reading the 64 bit time * value involves reading two 32 bit registers. The first read latches the * value. **/ static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter, struct skb_shared_hwtstamps *hwtstamps, u64 systim) { u64 ns; unsigned long flags; spin_lock_irqsave(&adapter->systim_lock, flags); ns = timecounter_cyc2time(&adapter->tc, systim); spin_unlock_irqrestore(&adapter->systim_lock, flags); memset(hwtstamps, 0, sizeof(*hwtstamps)); hwtstamps->hwtstamp = ns_to_ktime(ns); } /** * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp * @adapter: board private structure * @status: descriptor extended error and status field * @skb: particular skb to include time stamp * * If the time stamp is valid, convert it into the timecounter ns value * and store that result into the shhwtstamps structure which is passed * up the network stack. **/ static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status, struct sk_buff *skb) { struct e1000_hw *hw = &adapter->hw; u64 rxstmp; if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) || !(status & E1000_RXDEXT_STATERR_TST) || !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) return; /* The Rx time stamp registers contain the time stamp. No other * received packet will be time stamped until the Rx time stamp * registers are read. Because only one packet can be time stamped * at a time, the register values must belong to this packet and * therefore none of the other additional attributes need to be * compared. */ rxstmp = (u64)er32(RXSTMPL); rxstmp |= (u64)er32(RXSTMPH) << 32; e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp); adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP; } /** * e1000_receive_skb - helper function to handle Rx indications * @adapter: board private structure * @staterr: descriptor extended error and status field as written by hardware * @vlan: descriptor vlan field as written by hardware (no le/be conversion) * @skb: pointer to sk_buff to be indicated to stack **/ static void e1000_receive_skb(struct e1000_adapter *adapter, struct net_device *netdev, struct sk_buff *skb, u32 staterr, __le16 vlan) { u16 tag = le16_to_cpu(vlan); e1000e_rx_hwtstamp(adapter, staterr, skb); skb->protocol = eth_type_trans(skb, netdev); if (staterr & E1000_RXD_STAT_VP) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tag); napi_gro_receive(&adapter->napi, skb); } /** * e1000_rx_checksum - Receive Checksum Offload * @adapter: board private structure * @status_err: receive descriptor status and error fields * @csum: receive descriptor csum field * @sk_buff: socket buffer with received data **/ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, struct sk_buff *skb) { u16 status = (u16)status_err; u8 errors = (u8)(status_err >> 24); skb_checksum_none_assert(skb); /* Rx checksum disabled */ if (!(adapter->netdev->features & NETIF_F_RXCSUM)) return; /* Ignore Checksum bit is set */ if (status & E1000_RXD_STAT_IXSM) return; /* TCP/UDP checksum error bit or IP checksum error bit is set */ if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) { /* let the stack verify checksum errors */ adapter->hw_csum_err++; return; } /* TCP/UDP Checksum has not been calculated */ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) return; /* It must be a TCP or UDP packet with a valid checksum */ skb->ip_summed = CHECKSUM_UNNECESSARY; adapter->hw_csum_good++; } static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i) { struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_hw *hw = &adapter->hw; s32 ret_val = __ew32_prepare(hw); writel(i, rx_ring->tail); if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) { u32 rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); e_err("ME firmware caused invalid RDT - resetting\n"); schedule_work(&adapter->reset_task); } } static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i) { struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_hw *hw = &adapter->hw; s32 ret_val = __ew32_prepare(hw); writel(i, tx_ring->tail); if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) { u32 tctl = er32(TCTL); ew32(TCTL, tctl & ~E1000_TCTL_EN); e_err("ME firmware caused invalid TDT - resetting\n"); schedule_work(&adapter->reset_task); } } /** * e1000_alloc_rx_buffers - Replace used receive buffers * @rx_ring: Rx descriptor ring **/ static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring, int cleaned_count, gfp_t gfp) { struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_extended *rx_desc; struct e1000_buffer *buffer_info; struct sk_buff *skb; unsigned int i; unsigned int bufsz = adapter->rx_buffer_len; i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; while (cleaned_count--) { skb = buffer_info->skb; if (skb) { skb_trim(skb, 0); goto map_skb; } skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp); if (!skb) { /* Better luck next round */ adapter->alloc_rx_buff_failed++; break; } buffer_info->skb = skb; map_skb: buffer_info->dma = dma_map_single(&pdev->dev, skb->data, adapter->rx_buffer_len, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { dev_err(&pdev->dev, "Rx DMA map failed\n"); adapter->rx_dma_failed++; break; } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, i); else writel(i, rx_ring->tail); } i++; if (i == rx_ring->count) i = 0; buffer_info = &rx_ring->buffer_info[i]; } rx_ring->next_to_use = i; } /** * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split * @rx_ring: Rx descriptor ring **/ static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring, int cleaned_count, gfp_t gfp) { struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_packet_split *rx_desc; struct e1000_buffer *buffer_info; struct e1000_ps_page *ps_page; struct sk_buff *skb; unsigned int i, j; i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; while (cleaned_count--) { rx_desc = E1000_RX_DESC_PS(*rx_ring, i); for (j = 0; j < PS_PAGE_BUFFERS; j++) { ps_page = &buffer_info->ps_pages[j]; if (j >= adapter->rx_ps_pages) { /* all unused desc entries get hw null ptr */ rx_desc->read.buffer_addr[j + 1] = ~cpu_to_le64(0); continue; } if (!ps_page->page) { ps_page->page = alloc_page(gfp); if (!ps_page->page) { adapter->alloc_rx_buff_failed++; goto no_buffers; } ps_page->dma = dma_map_page(&pdev->dev, ps_page->page, 0, PAGE_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, ps_page->dma)) { dev_err(&adapter->pdev->dev, "Rx DMA page map failed\n"); adapter->rx_dma_failed++; goto no_buffers; } } /* Refresh the desc even if buffer_addrs * didn't change because each write-back * erases this info. */ rx_desc->read.buffer_addr[j + 1] = cpu_to_le64(ps_page->dma); } skb = __netdev_alloc_skb_ip_align(netdev, adapter->rx_ps_bsize0, gfp); if (!skb) { adapter->alloc_rx_buff_failed++; break; } buffer_info->skb = skb; buffer_info->dma = dma_map_single(&pdev->dev, skb->data, adapter->rx_ps_bsize0, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { dev_err(&pdev->dev, "Rx DMA map failed\n"); adapter->rx_dma_failed++; /* cleanup skb */ dev_kfree_skb_any(skb); buffer_info->skb = NULL; break; } rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, i << 1); else writel(i << 1, rx_ring->tail); } i++; if (i == rx_ring->count) i = 0; buffer_info = &rx_ring->buffer_info[i]; } no_buffers: rx_ring->next_to_use = i; } /** * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers * @rx_ring: Rx descriptor ring * @cleaned_count: number of buffers to allocate this pass **/ static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring, int cleaned_count, gfp_t gfp) { struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_extended *rx_desc; struct e1000_buffer *buffer_info; struct sk_buff *skb; unsigned int i; unsigned int bufsz = 256 - 16; /* for skb_reserve */ i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; while (cleaned_count--) { skb = buffer_info->skb; if (skb) { skb_trim(skb, 0); goto check_page; } skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp); if (unlikely(!skb)) { /* Better luck next round */ adapter->alloc_rx_buff_failed++; break; } buffer_info->skb = skb; check_page: /* allocate a new page if necessary */ if (!buffer_info->page) { buffer_info->page = alloc_page(gfp); if (unlikely(!buffer_info->page)) { adapter->alloc_rx_buff_failed++; break; } } if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, buffer_info->page, 0, PAGE_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { adapter->alloc_rx_buff_failed++; break; } } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); if (unlikely(++i == rx_ring->count)) i = 0; buffer_info = &rx_ring->buffer_info[i]; } if (likely(rx_ring->next_to_use != i)) { rx_ring->next_to_use = i; if (unlikely(i-- == 0)) i = (rx_ring->count - 1); /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, i); else writel(i, rx_ring->tail); } } static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss, struct sk_buff *skb) { if (netdev->features & NETIF_F_RXHASH) skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3); } /** * e1000_clean_rx_irq - Send received data up the network stack * @rx_ring: Rx descriptor ring * * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done, int work_to_do) { struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct e1000_hw *hw = &adapter->hw; union e1000_rx_desc_extended *rx_desc, *next_rxd; struct e1000_buffer *buffer_info, *next_buffer; u32 length, staterr; unsigned int i; int cleaned_count = 0; bool cleaned = false; unsigned int total_rx_bytes = 0, total_rx_packets = 0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); staterr = le32_to_cpu(rx_desc->wb.upper.status_error); buffer_info = &rx_ring->buffer_info[i]; while (staterr & E1000_RXD_STAT_DD) { struct sk_buff *skb; if (*work_done >= work_to_do) break; (*work_done)++; rmb(); /* read descriptor and rx_buffer_info after status DD */ skb = buffer_info->skb; buffer_info->skb = NULL; prefetch(skb->data - NET_IP_ALIGN); i++; if (i == rx_ring->count) i = 0; next_rxd = E1000_RX_DESC_EXT(*rx_ring, i); prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; cleaned = true; cleaned_count++; dma_unmap_single(&pdev->dev, buffer_info->dma, adapter->rx_buffer_len, DMA_FROM_DEVICE); buffer_info->dma = 0; length = le16_to_cpu(rx_desc->wb.upper.length); /* !EOP means multiple descriptors were used to store a single * packet, if that's the case we need to toss it. In fact, we * need to toss every packet with the EOP bit clear and the * next frame that _does_ have the EOP bit set, as it is by * definition only a frame fragment */ if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) adapter->flags2 |= FLAG2_IS_DISCARDING; if (adapter->flags2 & FLAG2_IS_DISCARDING) { /* All receives must fit into a single buffer */ e_dbg("Receive packet consumed multiple buffers\n"); /* recycle */ buffer_info->skb = skb; if (staterr & E1000_RXD_STAT_EOP) adapter->flags2 &= ~FLAG2_IS_DISCARDING; goto next_desc; } if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && !(netdev->features & NETIF_F_RXALL))) { /* recycle */ buffer_info->skb = skb; goto next_desc; } /* adjust length to remove Ethernet CRC */ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { /* If configured to store CRC, don't subtract FCS, * but keep the FCS bytes out of the total_rx_bytes * counter */ if (netdev->features & NETIF_F_RXFCS) total_rx_bytes -= 4; else length -= 4; } total_rx_bytes += length; total_rx_packets++; /* code added for copybreak, this should improve * performance for small packets with large amounts * of reassembly being done in the stack */ if (length < copybreak) { struct sk_buff *new_skb = napi_alloc_skb(&adapter->napi, length); if (new_skb) { skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN, (skb->data - NET_IP_ALIGN), (length + NET_IP_ALIGN)); /* save the skb in buffer_info as good */ buffer_info->skb = skb; skb = new_skb; } /* else just continue with the old one */ } /* end copybreak code */ skb_put(skb, length); /* Receive Checksum Offload */ e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); e1000_receive_skb(adapter, netdev, skb, staterr, rx_desc->wb.upper.vlan); next_desc: rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF); /* return some buffers to hardware, one at a time is too slow */ if (cleaned_count >= E1000_RX_BUFFER_WRITE) { adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); cleaned_count = 0; } /* use prefetched values */ rx_desc = next_rxd; buffer_info = next_buffer; staterr = le32_to_cpu(rx_desc->wb.upper.status_error); } rx_ring->next_to_clean = i; cleaned_count = e1000_desc_unused(rx_ring); if (cleaned_count) adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; return cleaned; } static void e1000_put_txbuf(struct e1000_ring *tx_ring, struct e1000_buffer *buffer_info) { struct e1000_adapter *adapter = tx_ring->adapter; if (buffer_info->dma) { if (buffer_info->mapped_as_page) dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, buffer_info->length, DMA_TO_DEVICE); else dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, buffer_info->length, DMA_TO_DEVICE); buffer_info->dma = 0; } if (buffer_info->skb) { dev_kfree_skb_any(buffer_info->skb); buffer_info->skb = NULL; } buffer_info->time_stamp = 0; } static void e1000_print_hw_hang(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, print_hang_task); struct net_device *netdev = adapter->netdev; struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int i = tx_ring->next_to_clean; unsigned int eop = tx_ring->buffer_info[i].next_to_watch; struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); struct e1000_hw *hw = &adapter->hw; u16 phy_status, phy_1000t_status, phy_ext_status; u16 pci_status; if (test_bit(__E1000_DOWN, &adapter->state)) return; if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) { /* May be block on write-back, flush and detect again * flush pending descriptor writebacks to memory */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); /* execute the writes immediately */ e1e_flush(); /* Due to rare timing issues, write to TIDV again to ensure * the write is successful */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); /* execute the writes immediately */ e1e_flush(); adapter->tx_hang_recheck = true; return; } adapter->tx_hang_recheck = false; if (er32(TDH(0)) == er32(TDT(0))) { e_dbg("false hang detected, ignoring\n"); return; } /* Real hang detected */ netif_stop_queue(netdev); e1e_rphy(hw, MII_BMSR, &phy_status); e1e_rphy(hw, MII_STAT1000, &phy_1000t_status); e1e_rphy(hw, MII_ESTATUS, &phy_ext_status); pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); /* detected Hardware unit hang */ e_err("Detected Hardware Unit Hang:\n" " TDH <%x>\n" " TDT <%x>\n" " next_to_use <%x>\n" " next_to_clean <%x>\n" "buffer_info[next_to_clean]:\n" " time_stamp <%lx>\n" " next_to_watch <%x>\n" " jiffies <%lx>\n" " next_to_watch.status <%x>\n" "MAC Status <%x>\n" "PHY Status <%x>\n" "PHY 1000BASE-T Status <%x>\n" "PHY Extended Status <%x>\n" "PCI Status <%x>\n", readl(tx_ring->head), readl(tx_ring->tail), tx_ring->next_to_use, tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp, eop, jiffies, eop_desc->upper.fields.status, er32(STATUS), phy_status, phy_1000t_status, phy_ext_status, pci_status); e1000e_dump(adapter); /* Suggest workaround for known h/w issue */ if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE)) e_err("Try turning off Tx pause (flow control) via ethtool\n"); } /** * e1000e_tx_hwtstamp_work - check for Tx time stamp * @work: pointer to work struct * * This work function polls the TSYNCTXCTL valid bit to determine when a * timestamp has been taken for the current stored skb. The timestamp must * be for this skb because only one such packet is allowed in the queue. */ static void e1000e_tx_hwtstamp_work(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, tx_hwtstamp_work); struct e1000_hw *hw = &adapter->hw; if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) { struct skb_shared_hwtstamps shhwtstamps; u64 txstmp; txstmp = er32(TXSTMPL); txstmp |= (u64)er32(TXSTMPH) << 32; e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp); skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps); dev_kfree_skb_any(adapter->tx_hwtstamp_skb); adapter->tx_hwtstamp_skb = NULL; } else if (time_after(jiffies, adapter->tx_hwtstamp_start + adapter->tx_timeout_factor * HZ)) { dev_kfree_skb_any(adapter->tx_hwtstamp_skb); adapter->tx_hwtstamp_skb = NULL; adapter->tx_hwtstamp_timeouts++; e_warn("clearing Tx timestamp hang\n"); } else { /* reschedule to check later */ schedule_work(&adapter->tx_hwtstamp_work); } } /** * e1000_clean_tx_irq - Reclaim resources after transmit completes * @tx_ring: Tx descriptor ring * * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring) { struct e1000_adapter *adapter = tx_ring->adapter; struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; struct e1000_tx_desc *tx_desc, *eop_desc; struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; unsigned int total_tx_bytes = 0, total_tx_packets = 0; unsigned int bytes_compl = 0, pkts_compl = 0; i = tx_ring->next_to_clean; eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { bool cleaned = false; rmb(); /* read buffer_info after eop_desc */ for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); if (cleaned) { total_tx_packets += buffer_info->segs; total_tx_bytes += buffer_info->bytecount; if (buffer_info->skb) { bytes_compl += buffer_info->skb->len; pkts_compl++; } } e1000_put_txbuf(tx_ring, buffer_info); tx_desc->upper.data = 0; i++; if (i == tx_ring->count) i = 0; } if (i == tx_ring->next_to_use) break; eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); } tx_ring->next_to_clean = i; netdev_completed_queue(netdev, pkts_compl, bytes_compl); #define TX_WAKE_THRESHOLD 32 if (count && netif_carrier_ok(netdev) && e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. */ smp_mb(); if (netif_queue_stopped(netdev) && !(test_bit(__E1000_DOWN, &adapter->state))) { netif_wake_queue(netdev); ++adapter->restart_queue; } } if (adapter->detect_tx_hung) { /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = false; if (tx_ring->buffer_info[i].time_stamp && time_after(jiffies, tx_ring->buffer_info[i].time_stamp + (adapter->tx_timeout_factor * HZ)) && !(er32(STATUS) & E1000_STATUS_TXOFF)) schedule_work(&adapter->print_hang_task); else adapter->tx_hang_recheck = false; } adapter->total_tx_bytes += total_tx_bytes; adapter->total_tx_packets += total_tx_packets; return count < tx_ring->count; } /** * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split * @rx_ring: Rx descriptor ring * * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done, int work_to_do) { struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_hw *hw = &adapter->hw; union e1000_rx_desc_packet_split *rx_desc, *next_rxd; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct e1000_buffer *buffer_info, *next_buffer; struct e1000_ps_page *ps_page; struct sk_buff *skb; unsigned int i, j; u32 length, staterr; int cleaned_count = 0; bool cleaned = false; unsigned int total_rx_bytes = 0, total_rx_packets = 0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_PS(*rx_ring, i); staterr = le32_to_cpu(rx_desc->wb.middle.status_error); buffer_info = &rx_ring->buffer_info[i]; while (staterr & E1000_RXD_STAT_DD) { if (*work_done >= work_to_do) break; (*work_done)++; skb = buffer_info->skb; rmb(); /* read descriptor and rx_buffer_info after status DD */ /* in the packet split case this is header only */ prefetch(skb->data - NET_IP_ALIGN); i++; if (i == rx_ring->count) i = 0; next_rxd = E1000_RX_DESC_PS(*rx_ring, i); prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; cleaned = true; cleaned_count++; dma_unmap_single(&pdev->dev, buffer_info->dma, adapter->rx_ps_bsize0, DMA_FROM_DEVICE); buffer_info->dma = 0; /* see !EOP comment in other Rx routine */ if (!(staterr & E1000_RXD_STAT_EOP)) adapter->flags2 |= FLAG2_IS_DISCARDING; if (adapter->flags2 & FLAG2_IS_DISCARDING) { e_dbg("Packet Split buffers didn't pick up the full packet\n"); dev_kfree_skb_irq(skb); if (staterr & E1000_RXD_STAT_EOP) adapter->flags2 &= ~FLAG2_IS_DISCARDING; goto next_desc; } if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && !(netdev->features & NETIF_F_RXALL))) { dev_kfree_skb_irq(skb); goto next_desc; } length = le16_to_cpu(rx_desc->wb.middle.length0); if (!length) { e_dbg("Last part of the packet spanning multiple descriptors\n"); dev_kfree_skb_irq(skb); goto next_desc; } /* Good Receive */ skb_put(skb, length); { /* this looks ugly, but it seems compiler issues make * it more efficient than reusing j */ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); /* page alloc/put takes too long and effects small * packet throughput, so unsplit small packets and * save the alloc/put only valid in softirq (napi) * context to call kmap_* */ if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) { u8 *vaddr; ps_page = &buffer_info->ps_pages[0]; /* there is no documentation about how to call * kmap_atomic, so we can't hold the mapping * very long */ dma_sync_single_for_cpu(&pdev->dev, ps_page->dma, PAGE_SIZE, DMA_FROM_DEVICE); vaddr = kmap_atomic(ps_page->page); memcpy(skb_tail_pointer(skb), vaddr, l1); kunmap_atomic(vaddr); dma_sync_single_for_device(&pdev->dev, ps_page->dma, PAGE_SIZE, DMA_FROM_DEVICE); /* remove the CRC */ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { if (!(netdev->features & NETIF_F_RXFCS)) l1 -= 4; } skb_put(skb, l1); goto copydone; } /* if */ } for (j = 0; j < PS_PAGE_BUFFERS; j++) { length = le16_to_cpu(rx_desc->wb.upper.length[j]); if (!length) break; ps_page = &buffer_info->ps_pages[j]; dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE, DMA_FROM_DEVICE); ps_page->dma = 0; skb_fill_page_desc(skb, j, ps_page->page, 0, length); ps_page->page = NULL; skb->len += length; skb->data_len += length; skb->truesize += PAGE_SIZE; } /* strip the ethernet crc, problem is we're using pages now so * this whole operation can get a little cpu intensive */ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { if (!(netdev->features & NETIF_F_RXFCS)) pskb_trim(skb, skb->len - 4); } copydone: total_rx_bytes += skb->len; total_rx_packets++; e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); if (rx_desc->wb.upper.header_status & cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) adapter->rx_hdr_split++; e1000_receive_skb(adapter, netdev, skb, staterr, rx_desc->wb.middle.vlan); next_desc: rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); buffer_info->skb = NULL; /* return some buffers to hardware, one at a time is too slow */ if (cleaned_count >= E1000_RX_BUFFER_WRITE) { adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); cleaned_count = 0; } /* use prefetched values */ rx_desc = next_rxd; buffer_info = next_buffer; staterr = le32_to_cpu(rx_desc->wb.middle.status_error); } rx_ring->next_to_clean = i; cleaned_count = e1000_desc_unused(rx_ring); if (cleaned_count) adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; return cleaned; } /** * e1000_consume_page - helper function **/ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, u16 length) { bi->page = NULL; skb->len += length; skb->data_len += length; skb->truesize += PAGE_SIZE; } /** * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy * @adapter: board private structure * * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done, int work_to_do) { struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_extended *rx_desc, *next_rxd; struct e1000_buffer *buffer_info, *next_buffer; u32 length, staterr; unsigned int i; int cleaned_count = 0; bool cleaned = false; unsigned int total_rx_bytes = 0, total_rx_packets = 0; struct skb_shared_info *shinfo; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); staterr = le32_to_cpu(rx_desc->wb.upper.status_error); buffer_info = &rx_ring->buffer_info[i]; while (staterr & E1000_RXD_STAT_DD) { struct sk_buff *skb; if (*work_done >= work_to_do) break; (*work_done)++; rmb(); /* read descriptor and rx_buffer_info after status DD */ skb = buffer_info->skb; buffer_info->skb = NULL; ++i; if (i == rx_ring->count) i = 0; next_rxd = E1000_RX_DESC_EXT(*rx_ring, i); prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; cleaned = true; cleaned_count++; dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE, DMA_FROM_DEVICE); buffer_info->dma = 0; length = le16_to_cpu(rx_desc->wb.upper.length); /* errors is only valid for DD + EOP descriptors */ if (unlikely((staterr & E1000_RXD_STAT_EOP) && ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && !(netdev->features & NETIF_F_RXALL)))) { /* recycle both page and skb */ buffer_info->skb = skb; /* an error means any chain goes out the window too */ if (rx_ring->rx_skb_top) dev_kfree_skb_irq(rx_ring->rx_skb_top); rx_ring->rx_skb_top = NULL; goto next_desc; } #define rxtop (rx_ring->rx_skb_top) if (!(staterr & E1000_RXD_STAT_EOP)) { /* this descriptor is only the beginning (or middle) */ if (!rxtop) { /* this is the beginning of a chain */ rxtop = skb; skb_fill_page_desc(rxtop, 0, buffer_info->page, 0, length); } else { /* this is the middle of a chain */ shinfo = skb_shinfo(rxtop); skb_fill_page_desc(rxtop, shinfo->nr_frags, buffer_info->page, 0, length); /* re-use the skb, only consumed the page */ buffer_info->skb = skb; } e1000_consume_page(buffer_info, rxtop, length); goto next_desc; } else { if (rxtop) { /* end of the chain */ shinfo = skb_shinfo(rxtop); skb_fill_page_desc(rxtop, shinfo->nr_frags, buffer_info->page, 0, length); /* re-use the current skb, we only consumed the * page */ buffer_info->skb = skb; skb = rxtop; rxtop = NULL; e1000_consume_page(buffer_info, skb, length); } else { /* no chain, got EOP, this buf is the packet * copybreak to save the put_page/alloc_page */ if (length <= copybreak && skb_tailroom(skb) >= length) { u8 *vaddr; vaddr = kmap_atomic(buffer_info->page); memcpy(skb_tail_pointer(skb), vaddr, length); kunmap_atomic(vaddr); /* re-use the page, so don't erase * buffer_info->page */ skb_put(skb, length); } else { skb_fill_page_desc(skb, 0, buffer_info->page, 0, length); e1000_consume_page(buffer_info, skb, length); } } } /* Receive Checksum Offload */ e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); /* probably a little skewed due to removing CRC */ total_rx_bytes += skb->len; total_rx_packets++; /* eth type trans needs skb->data to point to something */ if (!pskb_may_pull(skb, ETH_HLEN)) { e_err("pskb_may_pull failed.\n"); dev_kfree_skb_irq(skb); goto next_desc; } e1000_receive_skb(adapter, netdev, skb, staterr, rx_desc->wb.upper.vlan); next_desc: rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF); /* return some buffers to hardware, one at a time is too slow */ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) { adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); cleaned_count = 0; } /* use prefetched values */ rx_desc = next_rxd; buffer_info = next_buffer; staterr = le32_to_cpu(rx_desc->wb.upper.status_error); } rx_ring->next_to_clean = i; cleaned_count = e1000_desc_unused(rx_ring); if (cleaned_count) adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; return cleaned; } /** * e1000_clean_rx_ring - Free Rx Buffers per Queue * @rx_ring: Rx descriptor ring **/ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring) { struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_buffer *buffer_info; struct e1000_ps_page *ps_page; struct pci_dev *pdev = adapter->pdev; unsigned int i, j; /* Free all the Rx ring sk_buffs */ for (i = 0; i < rx_ring->count; i++) { buffer_info = &rx_ring->buffer_info[i]; if (buffer_info->dma) { if (adapter->clean_rx == e1000_clean_rx_irq) dma_unmap_single(&pdev->dev, buffer_info->dma, adapter->rx_buffer_len, DMA_FROM_DEVICE); else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq) dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE, DMA_FROM_DEVICE); else if (adapter->clean_rx == e1000_clean_rx_irq_ps) dma_unmap_single(&pdev->dev, buffer_info->dma, adapter->rx_ps_bsize0, DMA_FROM_DEVICE); buffer_info->dma = 0; } if (buffer_info->page) { put_page(buffer_info->page); buffer_info->page = NULL; } if (buffer_info->skb) { dev_kfree_skb(buffer_info->skb); buffer_info->skb = NULL; } for (j = 0; j < PS_PAGE_BUFFERS; j++) { ps_page = &buffer_info->ps_pages[j]; if (!ps_page->page) break; dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE, DMA_FROM_DEVICE); ps_page->dma = 0; put_page(ps_page->page); ps_page->page = NULL; } } /* there also may be some cached data from a chained receive */ if (rx_ring->rx_skb_top) { dev_kfree_skb(rx_ring->rx_skb_top); rx_ring->rx_skb_top = NULL; } /* Zero out the descriptor ring */ memset(rx_ring->desc, 0, rx_ring->size); rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; adapter->flags2 &= ~FLAG2_IS_DISCARDING; writel(0, rx_ring->head); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, 0); else writel(0, rx_ring->tail); } static void e1000e_downshift_workaround(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, downshift_task); if (test_bit(__E1000_DOWN, &adapter->state)) return; e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); } /** * e1000_intr_msi - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure **/ static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); /* read ICR disables interrupts using IAM */ if (icr & E1000_ICR_LSC) { hw->mac.get_link_status = true; /* ICH8 workaround-- Call gig speed drop workaround on cable * disconnect (LSC) before accessing any PHY registers */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) schedule_work(&adapter->downshift_task); /* 80003ES2LAN workaround-- For packet buffer work-around on * link down event; disable receives here in the ISR and reset * adapter in watchdog */ if (netif_carrier_ok(netdev) && adapter->flags & FLAG_RX_NEEDS_RESTART) { /* disable receives */ u32 rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } /* Reset on uncorrectable ECC error */ if ((icr & E1000_ICR_ECCER) && ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt))) { u32 pbeccsts = er32(PBECCSTS); adapter->corr_errors += pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; adapter->uncorr_errors += (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; /* Do the reset outside of interrupt context */ schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ return IRQ_HANDLED; } if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; __napi_schedule(&adapter->napi); } return IRQ_HANDLED; } /** * e1000_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure **/ static irqreturn_t e1000_intr(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); if (!icr || test_bit(__E1000_DOWN, &adapter->state)) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is * not set, then the adapter didn't send an interrupt */ if (!(icr & E1000_ICR_INT_ASSERTED)) return IRQ_NONE; /* Interrupt Auto-Mask...upon reading ICR, * interrupts are masked. No need for the * IMC write */ if (icr & E1000_ICR_LSC) { hw->mac.get_link_status = true; /* ICH8 workaround-- Call gig speed drop workaround on cable * disconnect (LSC) before accessing any PHY registers */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) schedule_work(&adapter->downshift_task); /* 80003ES2LAN workaround-- * For packet buffer work-around on link down event; * disable receives here in the ISR and * reset adapter in watchdog */ if (netif_carrier_ok(netdev) && (adapter->flags & FLAG_RX_NEEDS_RESTART)) { /* disable receives */ rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } /* Reset on uncorrectable ECC error */ if ((icr & E1000_ICR_ECCER) && ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt))) { u32 pbeccsts = er32(PBECCSTS); adapter->corr_errors += pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; adapter->uncorr_errors += (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; /* Do the reset outside of interrupt context */ schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ return IRQ_HANDLED; } if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; __napi_schedule(&adapter->napi); } return IRQ_HANDLED; } static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); if (!(icr & E1000_ICR_INT_ASSERTED)) { if (!test_bit(__E1000_DOWN, &adapter->state)) ew32(IMS, E1000_IMS_OTHER); return IRQ_NONE; } if (icr & adapter->eiac_mask) ew32(ICS, (icr & adapter->eiac_mask)); if (icr & E1000_ICR_OTHER) { if (!(icr & E1000_ICR_LSC)) goto no_link_interrupt; hw->mac.get_link_status = true; /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } no_link_interrupt: if (!test_bit(__E1000_DOWN, &adapter->state)) ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER); return IRQ_HANDLED; } static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct e1000_ring *tx_ring = adapter->tx_ring; adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; if (!e1000_clean_tx_irq(tx_ring)) /* Ring was not completely cleaned, so fire another interrupt */ ew32(ICS, tx_ring->ims_val); return IRQ_HANDLED; } static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_ring *rx_ring = adapter->rx_ring; /* Write the ITR value calculated at the end of the * previous interrupt. */ if (rx_ring->set_itr) { writel(1000000000 / (rx_ring->itr_val * 256), rx_ring->itr_register); rx_ring->set_itr = 0; } if (napi_schedule_prep(&adapter->napi)) { adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; __napi_schedule(&adapter->napi); } return IRQ_HANDLED; } /** * e1000_configure_msix - Configure MSI-X hardware * * e1000_configure_msix sets up the hardware to properly * generate MSI-X interrupts. **/ static void e1000_configure_msix(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct e1000_ring *rx_ring = adapter->rx_ring; struct e1000_ring *tx_ring = adapter->tx_ring; int vector = 0; u32 ctrl_ext, ivar = 0; adapter->eiac_mask = 0; /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */ if (hw->mac.type == e1000_82574) { u32 rfctl = er32(RFCTL); rfctl |= E1000_RFCTL_ACK_DIS; ew32(RFCTL, rfctl); } /* Configure Rx vector */ rx_ring->ims_val = E1000_IMS_RXQ0; adapter->eiac_mask |= rx_ring->ims_val; if (rx_ring->itr_val) writel(1000000000 / (rx_ring->itr_val * 256), rx_ring->itr_register); else writel(1, rx_ring->itr_register); ivar = E1000_IVAR_INT_ALLOC_VALID | vector; /* Configure Tx vector */ tx_ring->ims_val = E1000_IMS_TXQ0; vector++; if (tx_ring->itr_val) writel(1000000000 / (tx_ring->itr_val * 256), tx_ring->itr_register); else writel(1, tx_ring->itr_register); adapter->eiac_mask |= tx_ring->ims_val; ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8); /* set vector for Other Causes, e.g. link changes */ vector++; ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16); if (rx_ring->itr_val) writel(1000000000 / (rx_ring->itr_val * 256), hw->hw_addr + E1000_EITR_82574(vector)); else writel(1, hw->hw_addr + E1000_EITR_82574(vector)); /* Cause Tx interrupts on every write back */ ivar |= (1 << 31); ew32(IVAR, ivar); /* enable MSI-X PBA support */ ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; /* Auto-Mask Other interrupts upon ICR read */ ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); ctrl_ext |= E1000_CTRL_EXT_EIAME; ew32(CTRL_EXT, ctrl_ext); e1e_flush(); } void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter) { if (adapter->msix_entries) { pci_disable_msix(adapter->pdev); kfree(adapter->msix_entries); adapter->msix_entries = NULL; } else if (adapter->flags & FLAG_MSI_ENABLED) { pci_disable_msi(adapter->pdev); adapter->flags &= ~FLAG_MSI_ENABLED; } } /** * e1000e_set_interrupt_capability - set MSI or MSI-X if supported * * Attempt to configure interrupts using the best available * capabilities of the hardware and kernel. **/ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) { int err; int i; switch (adapter->int_mode) { case E1000E_INT_MODE_MSIX: if (adapter->flags & FLAG_HAS_MSIX) { adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */ adapter->msix_entries = kcalloc(adapter->num_vectors, sizeof(struct msix_entry), GFP_KERNEL); if (adapter->msix_entries) { struct e1000_adapter *a = adapter; for (i = 0; i < adapter->num_vectors; i++) adapter->msix_entries[i].entry = i; err = pci_enable_msix_range(a->pdev, a->msix_entries, a->num_vectors, a->num_vectors); if (err > 0) return; } /* MSI-X failed, so fall through and try MSI */ e_err("Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.\n"); e1000e_reset_interrupt_capability(adapter); } adapter->int_mode = E1000E_INT_MODE_MSI; /* Fall through */ case E1000E_INT_MODE_MSI: if (!pci_enable_msi(adapter->pdev)) { adapter->flags |= FLAG_MSI_ENABLED; } else { adapter->int_mode = E1000E_INT_MODE_LEGACY; e_err("Failed to initialize MSI interrupts. Falling back to legacy interrupts.\n"); } /* Fall through */ case E1000E_INT_MODE_LEGACY: /* Don't do anything; this is the system default */ break; } /* store the number of vectors being used */ adapter->num_vectors = 1; } /** * e1000_request_msix - Initialize MSI-X interrupts * * e1000_request_msix allocates MSI-X vectors and requests interrupts from the * kernel. **/ static int e1000_request_msix(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; int err = 0, vector = 0; if (strlen(netdev->name) < (IFNAMSIZ - 5)) snprintf(adapter->rx_ring->name, sizeof(adapter->rx_ring->name) - 1, "%s-rx-0", netdev->name); else memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); err = request_irq(adapter->msix_entries[vector].vector, e1000_intr_msix_rx, 0, adapter->rx_ring->name, netdev); if (err) return err; adapter->rx_ring->itr_register = adapter->hw.hw_addr + E1000_EITR_82574(vector); adapter->rx_ring->itr_val = adapter->itr; vector++; if (strlen(netdev->name) < (IFNAMSIZ - 5)) snprintf(adapter->tx_ring->name, sizeof(adapter->tx_ring->name) - 1, "%s-tx-0", netdev->name); else memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); err = request_irq(adapter->msix_entries[vector].vector, e1000_intr_msix_tx, 0, adapter->tx_ring->name, netdev); if (err) return err; adapter->tx_ring->itr_register = adapter->hw.hw_addr + E1000_EITR_82574(vector); adapter->tx_ring->itr_val = adapter->itr; vector++; err = request_irq(adapter->msix_entries[vector].vector, e1000_msix_other, 0, netdev->name, netdev); if (err) return err; e1000_configure_msix(adapter); return 0; } /** * e1000_request_irq - initialize interrupts * * Attempts to configure interrupts using the best available * capabilities of the hardware and kernel. **/ static int e1000_request_irq(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; int err; if (adapter->msix_entries) { err = e1000_request_msix(adapter); if (!err) return err; /* fall back to MSI */ e1000e_reset_interrupt_capability(adapter); adapter->int_mode = E1000E_INT_MODE_MSI; e1000e_set_interrupt_capability(adapter); } if (adapter->flags & FLAG_MSI_ENABLED) { err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0, netdev->name, netdev); if (!err) return err; /* fall back to legacy interrupt */ e1000e_reset_interrupt_capability(adapter); adapter->int_mode = E1000E_INT_MODE_LEGACY; } err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED, netdev->name, netdev); if (err) e_err("Unable to allocate interrupt, Error: %d\n", err); return err; } static void e1000_free_irq(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; if (adapter->msix_entries) { int vector = 0; free_irq(adapter->msix_entries[vector].vector, netdev); vector++; free_irq(adapter->msix_entries[vector].vector, netdev); vector++; /* Other Causes interrupt vector */ free_irq(adapter->msix_entries[vector].vector, netdev); return; } free_irq(adapter->pdev->irq, netdev); } /** * e1000_irq_disable - Mask off interrupt generation on the NIC **/ static void e1000_irq_disable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; ew32(IMC, ~0); if (adapter->msix_entries) ew32(EIAC_82574, 0); e1e_flush(); if (adapter->msix_entries) { int i; for (i = 0; i < adapter->num_vectors; i++) synchronize_irq(adapter->msix_entries[i].vector); } else { synchronize_irq(adapter->pdev->irq); } } /** * e1000_irq_enable - Enable default interrupt generation settings **/ static void e1000_irq_enable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); } else if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { ew32(IMS, IMS_ENABLE_MASK); } e1e_flush(); } /** * e1000e_get_hw_control - get control of the h/w from f/w * @adapter: address of board private structure * * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) * of the f/w this means that the network i/f is open. **/ void e1000e_get_hw_control(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl_ext; u32 swsm; /* Let firmware know the driver has taken over */ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { swsm = er32(SWSM); ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { ctrl_ext = er32(CTRL_EXT); ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); } } /** * e1000e_release_hw_control - release control of the h/w to f/w * @adapter: address of board private structure * * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i * of the f/w this means that the network i/f is closed. * **/ void e1000e_release_hw_control(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl_ext; u32 swsm; /* Let firmware taken over control of h/w */ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { swsm = er32(SWSM); ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { ctrl_ext = er32(CTRL_EXT); ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); } } /** * e1000_alloc_ring_dma - allocate memory for a ring structure **/ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, struct e1000_ring *ring) { struct pci_dev *pdev = adapter->pdev; ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma, GFP_KERNEL); if (!ring->desc) return -ENOMEM; return 0; } /** * e1000e_setup_tx_resources - allocate Tx resources (Descriptors) * @tx_ring: Tx descriptor ring * * Return 0 on success, negative on failure **/ int e1000e_setup_tx_resources(struct e1000_ring *tx_ring) { struct e1000_adapter *adapter = tx_ring->adapter; int err = -ENOMEM, size; size = sizeof(struct e1000_buffer) * tx_ring->count; tx_ring->buffer_info = vzalloc(size); if (!tx_ring->buffer_info) goto err; /* round up to nearest 4K */ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); tx_ring->size = ALIGN(tx_ring->size, 4096); err = e1000_alloc_ring_dma(adapter, tx_ring); if (err) goto err; tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; return 0; err: vfree(tx_ring->buffer_info); e_err("Unable to allocate memory for the transmit descriptor ring\n"); return err; } /** * e1000e_setup_rx_resources - allocate Rx resources (Descriptors) * @rx_ring: Rx descriptor ring * * Returns 0 on success, negative on failure **/ int e1000e_setup_rx_resources(struct e1000_ring *rx_ring) { struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_buffer *buffer_info; int i, size, desc_len, err = -ENOMEM; size = sizeof(struct e1000_buffer) * rx_ring->count; rx_ring->buffer_info = vzalloc(size); if (!rx_ring->buffer_info) goto err; for (i = 0; i < rx_ring->count; i++) { buffer_info = &rx_ring->buffer_info[i]; buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS, sizeof(struct e1000_ps_page), GFP_KERNEL); if (!buffer_info->ps_pages) goto err_pages; } desc_len = sizeof(union e1000_rx_desc_packet_split); /* Round up to nearest 4K */ rx_ring->size = rx_ring->count * desc_len; rx_ring->size = ALIGN(rx_ring->size, 4096); err = e1000_alloc_ring_dma(adapter, rx_ring); if (err) goto err_pages; rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; rx_ring->rx_skb_top = NULL; return 0; err_pages: for (i = 0; i < rx_ring->count; i++) { buffer_info = &rx_ring->buffer_info[i]; kfree(buffer_info->ps_pages); } err: vfree(rx_ring->buffer_info); e_err("Unable to allocate memory for the receive descriptor ring\n"); return err; } /** * e1000_clean_tx_ring - Free Tx Buffers * @tx_ring: Tx descriptor ring **/ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring) { struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_buffer *buffer_info; unsigned long size; unsigned int i; for (i = 0; i < tx_ring->count; i++) { buffer_info = &tx_ring->buffer_info[i]; e1000_put_txbuf(tx_ring, buffer_info); } netdev_reset_queue(adapter->netdev); size = sizeof(struct e1000_buffer) * tx_ring->count; memset(tx_ring->buffer_info, 0, size); memset(tx_ring->desc, 0, tx_ring->size); tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; writel(0, tx_ring->head); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_tdt_wa(tx_ring, 0); else writel(0, tx_ring->tail); } /** * e1000e_free_tx_resources - Free Tx Resources per Queue * @tx_ring: Tx descriptor ring * * Free all transmit software resources **/ void e1000e_free_tx_resources(struct e1000_ring *tx_ring) { struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; e1000_clean_tx_ring(tx_ring); vfree(tx_ring->buffer_info); tx_ring->buffer_info = NULL; dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, tx_ring->dma); tx_ring->desc = NULL; } /** * e1000e_free_rx_resources - Free Rx Resources * @rx_ring: Rx descriptor ring * * Free all receive software resources **/ void e1000e_free_rx_resources(struct e1000_ring *rx_ring) { struct e1000_adapter *adapter = rx_ring->adapter; struct pci_dev *pdev = adapter->pdev; int i; e1000_clean_rx_ring(rx_ring); for (i = 0; i < rx_ring->count; i++) kfree(rx_ring->buffer_info[i].ps_pages); vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, rx_ring->dma); rx_ring->desc = NULL; } /** * e1000_update_itr - update the dynamic ITR value based on statistics * @adapter: pointer to adapter * @itr_setting: current adapter->itr * @packets: the number of packets during this measurement interval * @bytes: the number of bytes during this measurement interval * * Stores a new ITR value based on packets and byte * counts during the last interrupt. The advantage of per interrupt * computation is faster updates and more accurate ITR for the current * traffic pattern. Constants in this function were computed * based on theoretical maximum wire speed and thresholds were set based * on testing data as well as attempting to minimize response time * while increasing bulk throughput. This functionality is controlled * by the InterruptThrottleRate module parameter. **/ static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes) { unsigned int retval = itr_setting; if (packets == 0) return itr_setting; switch (itr_setting) { case lowest_latency: /* handle TSO and jumbo frames */ if (bytes / packets > 8000) retval = bulk_latency; else if ((packets < 5) && (bytes > 512)) retval = low_latency; break; case low_latency: /* 50 usec aka 20000 ints/s */ if (bytes > 10000) { /* this if handles the TSO accounting */ if (bytes / packets > 8000) retval = bulk_latency; else if ((packets < 10) || ((bytes / packets) > 1200)) retval = bulk_latency; else if ((packets > 35)) retval = lowest_latency; } else if (bytes / packets > 2000) { retval = bulk_latency; } else if (packets <= 2 && bytes < 512) { retval = lowest_latency; } break; case bulk_latency: /* 250 usec aka 4000 ints/s */ if (bytes > 25000) { if (packets > 35) retval = low_latency; } else if (bytes < 6000) { retval = low_latency; } break; } return retval; } static void e1000_set_itr(struct e1000_adapter *adapter) { u16 current_itr; u32 new_itr = adapter->itr; /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ if (adapter->link_speed != SPEED_1000) { current_itr = 0; new_itr = 4000; goto set_itr_now; } if (adapter->flags2 & FLAG2_DISABLE_AIM) { new_itr = 0; goto set_itr_now; } adapter->tx_itr = e1000_update_itr(adapter->tx_itr, adapter->total_tx_packets, adapter->total_tx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) adapter->tx_itr = low_latency; adapter->rx_itr = e1000_update_itr(adapter->rx_itr, adapter->total_rx_packets, adapter->total_rx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) adapter->rx_itr = low_latency; current_itr = max(adapter->rx_itr, adapter->tx_itr); /* counts and packets in update_itr are dependent on these numbers */ switch (current_itr) { case lowest_latency: new_itr = 70000; break; case low_latency: new_itr = 20000; /* aka hwitr = ~200 */ break; case bulk_latency: new_itr = 4000; break; default: break; } set_itr_now: if (new_itr != adapter->itr) { /* this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is * increasing */ new_itr = new_itr > adapter->itr ? min(adapter->itr + (new_itr >> 2), new_itr) : new_itr; adapter->itr = new_itr; adapter->rx_ring->itr_val = new_itr; if (adapter->msix_entries) adapter->rx_ring->set_itr = 1; else e1000e_write_itr(adapter, new_itr); } } /** * e1000e_write_itr - write the ITR value to the appropriate registers * @adapter: address of board private structure * @itr: new ITR value to program * * e1000e_write_itr determines if the adapter is in MSI-X mode * and, if so, writes the EITR registers with the ITR value. * Otherwise, it writes the ITR value into the ITR register. **/ void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr) { struct e1000_hw *hw = &adapter->hw; u32 new_itr = itr ? 1000000000 / (itr * 256) : 0; if (adapter->msix_entries) { int vector; for (vector = 0; vector < adapter->num_vectors; vector++) writel(new_itr, hw->hw_addr + E1000_EITR_82574(vector)); } else { ew32(ITR, new_itr); } } /** * e1000_alloc_queues - Allocate memory for all rings * @adapter: board private structure to initialize **/ static int e1000_alloc_queues(struct e1000_adapter *adapter) { int size = sizeof(struct e1000_ring); adapter->tx_ring = kzalloc(size, GFP_KERNEL); if (!adapter->tx_ring) goto err; adapter->tx_ring->count = adapter->tx_ring_count; adapter->tx_ring->adapter = adapter; adapter->rx_ring = kzalloc(size, GFP_KERNEL); if (!adapter->rx_ring) goto err; adapter->rx_ring->count = adapter->rx_ring_count; adapter->rx_ring->adapter = adapter; return 0; err: e_err("Unable to allocate memory for queues\n"); kfree(adapter->rx_ring); kfree(adapter->tx_ring); return -ENOMEM; } /** * e1000e_poll - NAPI Rx polling callback * @napi: struct associated with this polling callback * @weight: number of packets driver is allowed to process this poll **/ static int e1000e_poll(struct napi_struct *napi, int weight) { struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); struct e1000_hw *hw = &adapter->hw; struct net_device *poll_dev = adapter->netdev; int tx_cleaned = 1, work_done = 0; adapter = netdev_priv(poll_dev); if (!adapter->msix_entries || (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring); adapter->clean_rx(adapter->rx_ring, &work_done, weight); if (!tx_cleaned) work_done = weight; /* If weight not fully consumed, exit the polling mode */ if (work_done < weight) { if (adapter->itr_setting & 3) e1000_set_itr(adapter); napi_complete(napi); if (!test_bit(__E1000_DOWN, &adapter->state)) { if (adapter->msix_entries) ew32(IMS, adapter->rx_ring->ims_val); else e1000_irq_enable(adapter); } } return work_done; } static int e1000_vlan_rx_add_vid(struct net_device *netdev, __always_unused __be16 proto, u16 vid) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 vfta, index; /* don't update vlan cookie if already programmed */ if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && (vid == adapter->mng_vlan_id)) return 0; /* add VID to filter table */ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); vfta |= (1 << (vid & 0x1F)); hw->mac.ops.write_vfta(hw, index, vfta); } set_bit(vid, adapter->active_vlans); return 0; } static int e1000_vlan_rx_kill_vid(struct net_device *netdev, __always_unused __be16 proto, u16 vid) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 vfta, index; if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && (vid == adapter->mng_vlan_id)) { /* release control to f/w */ e1000e_release_hw_control(adapter); return 0; } /* remove VID from filter table */ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); vfta &= ~(1 << (vid & 0x1F)); hw->mac.ops.write_vfta(hw, index, vfta); } clear_bit(vid, adapter->active_vlans); return 0; } /** * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering * @adapter: board private structure to initialize **/ static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; u32 rctl; if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { /* disable VLAN receive filtering */ rctl = er32(RCTL); rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN); ew32(RCTL, rctl); if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) { e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), adapter->mng_vlan_id); adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; } } } /** * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering * @adapter: board private structure to initialize **/ static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 rctl; if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { /* enable VLAN receive filtering */ rctl = er32(RCTL); rctl |= E1000_RCTL_VFE; rctl &= ~E1000_RCTL_CFIEN; ew32(RCTL, rctl); } } /** * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping * @adapter: board private structure to initialize **/ static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl; /* disable VLAN tag insert/strip */ ctrl = er32(CTRL); ctrl &= ~E1000_CTRL_VME; ew32(CTRL, ctrl); } /** * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping * @adapter: board private structure to initialize **/ static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl; /* enable VLAN tag insert/strip */ ctrl = er32(CTRL); ctrl |= E1000_CTRL_VME; ew32(CTRL, ctrl); } static void e1000_update_mng_vlan(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; u16 vid = adapter->hw.mng_cookie.vlan_id; u16 old_vid = adapter->mng_vlan_id; if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { e1000_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid); adapter->mng_vlan_id = vid; } if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid)) e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), old_vid); } static void e1000_restore_vlan(struct e1000_adapter *adapter) { u16 vid; e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0); for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); } static void e1000_init_manageability_pt(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 manc, manc2h, mdef, i, j; if (!(adapter->flags & FLAG_MNG_PT_ENABLED)) return; manc = er32(MANC); /* enable receiving management packets to the host. this will probably * generate destination unreachable messages from the host OS, but * the packets will be handled on SMBUS */ manc |= E1000_MANC_EN_MNG2HOST; manc2h = er32(MANC2H); switch (hw->mac.type) { default: manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664); break; case e1000_82574: case e1000_82583: /* Check if IPMI pass-through decision filter already exists; * if so, enable it. */ for (i = 0, j = 0; i < 8; i++) { mdef = er32(MDEF(i)); /* Ignore filters with anything other than IPMI ports */ if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664)) continue; /* Enable this decision filter in MANC2H */ if (mdef) manc2h |= (1 << i); j |= mdef; } if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664)) break; /* Create new decision filter in an empty filter */ for (i = 0, j = 0; i < 8; i++) if (er32(MDEF(i)) == 0) { ew32(MDEF(i), (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664)); manc2h |= (1 << 1); j++; break; } if (!j) e_warn("Unable to create IPMI pass-through filter\n"); break; } ew32(MANC2H, manc2h); ew32(MANC, manc); } /** * e1000_configure_tx - Configure Transmit Unit after Reset * @adapter: board private structure * * Configure the Tx unit of the MAC after a reset. **/ static void e1000_configure_tx(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct e1000_ring *tx_ring = adapter->tx_ring; u64 tdba; u32 tdlen, tctl, tarc; /* Setup the HW Tx Head and Tail descriptor pointers */ tdba = tx_ring->dma; tdlen = tx_ring->count * sizeof(struct e1000_tx_desc); ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32))); ew32(TDBAH(0), (tdba >> 32)); ew32(TDLEN(0), tdlen); ew32(TDH(0), 0); ew32(TDT(0), 0); tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0); tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0); /* Set the Tx Interrupt Delay register */ ew32(TIDV, adapter->tx_int_delay); /* Tx irq moderation */ ew32(TADV, adapter->tx_abs_int_delay); if (adapter->flags2 & FLAG2_DMA_BURST) { u32 txdctl = er32(TXDCTL(0)); txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH | E1000_TXDCTL_WTHRESH); /* set up some performance related parameters to encourage the * hardware to use the bus more efficiently in bursts, depends * on the tx_int_delay to be enabled, * wthresh = 1 ==> burst write is disabled to avoid Tx stalls * hthresh = 1 ==> prefetch when one or more available * pthresh = 0x1f ==> prefetch if internal cache 31 or less * BEWARE: this seems to work but should be considered first if * there are Tx hangs or other Tx related bugs */ txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE; ew32(TXDCTL(0), txdctl); } /* erratum work around: set txdctl the same for both queues */ ew32(TXDCTL(1), er32(TXDCTL(0))); /* Program the Transmit Control Register */ tctl = er32(TCTL); tctl &= ~E1000_TCTL_CT; tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { tarc = er32(TARC(0)); /* set the speed mode bit, we'll clear it if we're not at * gigabit link later */ #define SPEED_MODE_BIT (1 << 21) tarc |= SPEED_MODE_BIT; ew32(TARC(0), tarc); } /* errata: program both queues to unweighted RR */ if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) { tarc = er32(TARC(0)); tarc |= 1; ew32(TARC(0), tarc); tarc = er32(TARC(1)); tarc |= 1; ew32(TARC(1), tarc); } /* Setup Transmit Descriptor Settings for eop descriptor */ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; /* only set IDE if we are delaying interrupts using the timers */ if (adapter->tx_int_delay) adapter->txd_cmd |= E1000_TXD_CMD_IDE; /* enable Report Status bit */ adapter->txd_cmd |= E1000_TXD_CMD_RS; ew32(TCTL, tctl); hw->mac.ops.config_collision_dist(hw); /* SPT Si errata workaround to avoid data corruption */ if (hw->mac.type == e1000_pch_spt) { u32 reg_val; reg_val = er32(IOSFPC); reg_val |= E1000_RCTL_RDMTS_HEX; ew32(IOSFPC, reg_val); reg_val = er32(TARC(0)); reg_val |= E1000_TARC0_CB_MULTIQ_3_REQ; ew32(TARC(0), reg_val); } } /** * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure **/ #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) static void e1000_setup_rctl(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 rctl, rfctl; u32 pages = 0; /* Workaround Si errata on PCHx - configure jumbo frame flow. * If jumbo frames not set, program related MAC/PHY registers * to h/w defaults */ if (hw->mac.type >= e1000_pch2lan) { s32 ret_val; if (adapter->netdev->mtu > ETH_DATA_LEN) ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); else ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); if (ret_val) e_dbg("failed to enable|disable jumbo frame workaround mode\n"); } /* Program MC offset vector base */ rctl = er32(RCTL); rctl &= ~(3 << E1000_RCTL_MO_SHIFT); rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); /* Do not Store bad packets */ rctl &= ~E1000_RCTL_SBP; /* Enable Long Packet receive */ if (adapter->netdev->mtu <= ETH_DATA_LEN) rctl &= ~E1000_RCTL_LPE; else rctl |= E1000_RCTL_LPE; /* Some systems expect that the CRC is included in SMBUS traffic. The * hardware strips the CRC before sending to both SMBUS (BMC) and to * host memory when this is enabled */ if (adapter->flags2 & FLAG2_CRC_STRIPPING) rctl |= E1000_RCTL_SECRC; /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */ if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) { u16 phy_data; e1e_rphy(hw, PHY_REG(770, 26), &phy_data); phy_data &= 0xfff8; phy_data |= (1 << 2); e1e_wphy(hw, PHY_REG(770, 26), phy_data); e1e_rphy(hw, 22, &phy_data); phy_data &= 0x0fff; phy_data |= (1 << 14); e1e_wphy(hw, 0x10, 0x2823); e1e_wphy(hw, 0x11, 0x0003); e1e_wphy(hw, 22, phy_data); } /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; rctl |= E1000_RCTL_BSEX; switch (adapter->rx_buffer_len) { case 2048: default: rctl |= E1000_RCTL_SZ_2048; rctl &= ~E1000_RCTL_BSEX; break; case 4096: rctl |= E1000_RCTL_SZ_4096; break; case 8192: rctl |= E1000_RCTL_SZ_8192; break; case 16384: rctl |= E1000_RCTL_SZ_16384; break; } /* Enable Extended Status in all Receive Descriptors */ rfctl = er32(RFCTL); rfctl |= E1000_RFCTL_EXTEN; ew32(RFCTL, rfctl); /* 82571 and greater support packet-split where the protocol * header is placed in skb->data and the packet data is * placed in pages hanging off of skb_shinfo(skb)->nr_frags. * In the case of a non-split, skb->data is linearly filled, * followed by the page buffers. Therefore, skb->data is * sized to hold the largest protocol header. * * allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames * * Using pages when the page size is greater than 16k wastes * a lot of memory, since we allocate 3 pages at all times * per packet. */ pages = PAGE_USE_COUNT(adapter->netdev->mtu); if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE)) adapter->rx_ps_pages = pages; else adapter->rx_ps_pages = 0; if (adapter->rx_ps_pages) { u32 psrctl = 0; /* Enable Packet split descriptors */ rctl |= E1000_RCTL_DTYP_PS; psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; switch (adapter->rx_ps_pages) { case 3: psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT; /* fall-through */ case 2: psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT; /* fall-through */ case 1: psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT; break; } ew32(PSRCTL, psrctl); } /* This is useful for sniffing bad packets. */ if (adapter->netdev->features & NETIF_F_RXALL) { /* UPE and MPE will be handled by normal PROMISC logic * in e1000e_set_rx_mode */ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ E1000_RCTL_BAM | /* RX All Bcast Pkts */ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */ E1000_RCTL_DPF | /* Allow filtered pause */ E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */ /* Do not mess with E1000_CTRL_VME, it affects transmit as well, * and that breaks VLANs. */ } ew32(RCTL, rctl); /* just started the receive unit, no need to restart */ adapter->flags &= ~FLAG_RESTART_NOW; } /** * e1000_configure_rx - Configure Receive Unit after Reset * @adapter: board private structure * * Configure the Rx unit of the MAC after a reset. **/ static void e1000_configure_rx(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct e1000_ring *rx_ring = adapter->rx_ring; u64 rdba; u32 rdlen, rctl, rxcsum, ctrl_ext; if (adapter->rx_ps_pages) { /* this is a 32 byte descriptor */ rdlen = rx_ring->count * sizeof(union e1000_rx_desc_packet_split); adapter->clean_rx = e1000_clean_rx_irq_ps; adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) { rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended); adapter->clean_rx = e1000_clean_jumbo_rx_irq; adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers; } else { rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended); adapter->clean_rx = e1000_clean_rx_irq; adapter->alloc_rx_buf = e1000_alloc_rx_buffers; } /* disable receives while setting up the descriptors */ rctl = er32(RCTL); if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) ew32(RCTL, rctl & ~E1000_RCTL_EN); e1e_flush(); usleep_range(10000, 20000); if (adapter->flags2 & FLAG2_DMA_BURST) { /* set the writeback threshold (only takes effect if the RDTR * is set). set GRAN=1 and write back up to 0x4 worth, and * enable prefetching of 0x20 Rx descriptors * granularity = 01 * wthresh = 04, * hthresh = 04, * pthresh = 0x20 */ ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE); ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE); /* override the delay timers for enabling bursting, only if * the value was not set by the user via module options */ if (adapter->rx_int_delay == DEFAULT_RDTR) adapter->rx_int_delay = BURST_RDTR; if (adapter->rx_abs_int_delay == DEFAULT_RADV) adapter->rx_abs_int_delay = BURST_RADV; } /* set the Receive Delay Timer Register */ ew32(RDTR, adapter->rx_int_delay); /* irq moderation */ ew32(RADV, adapter->rx_abs_int_delay); if ((adapter->itr_setting != 0) && (adapter->itr != 0)) e1000e_write_itr(adapter, adapter->itr); ctrl_ext = er32(CTRL_EXT); /* Auto-Mask interrupts upon ICR access */ ctrl_ext |= E1000_CTRL_EXT_IAME; ew32(IAM, 0xffffffff); ew32(CTRL_EXT, ctrl_ext); e1e_flush(); /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ rdba = rx_ring->dma; ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32))); ew32(RDBAH(0), (rdba >> 32)); ew32(RDLEN(0), rdlen); ew32(RDH(0), 0); ew32(RDT(0), 0); rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0); rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0); /* Enable Receive Checksum Offload for TCP and UDP */ rxcsum = er32(RXCSUM); if (adapter->netdev->features & NETIF_F_RXCSUM) rxcsum |= E1000_RXCSUM_TUOFL; else rxcsum &= ~E1000_RXCSUM_TUOFL; ew32(RXCSUM, rxcsum); /* With jumbo frames, excessive C-state transition latencies result * in dropped transactions. */ if (adapter->netdev->mtu > ETH_DATA_LEN) { u32 lat = ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 - adapter->max_frame_size) * 8 / 1000; if (adapter->flags & FLAG_IS_ICH) { u32 rxdctl = er32(RXDCTL(0)); ew32(RXDCTL(0), rxdctl | 0x3); } pm_qos_update_request(&adapter->netdev->pm_qos_req, lat); } else { pm_qos_update_request(&adapter->netdev->pm_qos_req, PM_QOS_DEFAULT_VALUE); } /* Enable Receives */ ew32(RCTL, rctl); } /** * e1000e_write_mc_addr_list - write multicast addresses to MTA * @netdev: network interface device structure * * Writes multicast address list to the MTA hash table. * Returns: -ENOMEM on failure * 0 on no addresses written * X on writing X addresses to MTA */ static int e1000e_write_mc_addr_list(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct netdev_hw_addr *ha; u8 *mta_list; int i; if (netdev_mc_empty(netdev)) { /* nothing to program, so clear mc list */ hw->mac.ops.update_mc_addr_list(hw, NULL, 0); return 0; } mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC); if (!mta_list) return -ENOMEM; /* update_mc_addr_list expects a packed array of only addresses. */ i = 0; netdev_for_each_mc_addr(ha, netdev) memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); hw->mac.ops.update_mc_addr_list(hw, mta_list, i); kfree(mta_list); return netdev_mc_count(netdev); } /** * e1000e_write_uc_addr_list - write unicast addresses to RAR table * @netdev: network interface device structure * * Writes unicast address list to the RAR table. * Returns: -ENOMEM on failure/insufficient address space * 0 on no addresses written * X on writing X addresses to the RAR table **/ static int e1000e_write_uc_addr_list(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; unsigned int rar_entries; int count = 0; rar_entries = hw->mac.ops.rar_get_count(hw); /* save a rar entry for our hardware address */ rar_entries--; /* save a rar entry for the LAA workaround */ if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) rar_entries--; /* return ENOMEM indicating insufficient memory for addresses */ if (netdev_uc_count(netdev) > rar_entries) return -ENOMEM; if (!netdev_uc_empty(netdev) && rar_entries) { struct netdev_hw_addr *ha; /* write the addresses in reverse order to avoid write * combining */ netdev_for_each_uc_addr(ha, netdev) { int rval; if (!rar_entries) break; rval = hw->mac.ops.rar_set(hw, ha->addr, rar_entries--); if (rval < 0) return -ENOMEM; count++; } } /* zero out the remaining RAR entries not used above */ for (; rar_entries > 0; rar_entries--) { ew32(RAH(rar_entries), 0); ew32(RAL(rar_entries), 0); } e1e_flush(); return count; } /** * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set * @netdev: network interface device structure * * The ndo_set_rx_mode entry point is called whenever the unicast or multicast * address list or the network interface flags are updated. This routine is * responsible for configuring the hardware for proper unicast, multicast, * promiscuous mode, and all-multi behavior. **/ static void e1000e_set_rx_mode(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 rctl; if (pm_runtime_suspended(netdev->dev.parent)) return; /* Check for Promiscuous and All Multicast modes */ rctl = er32(RCTL); /* clear the affected bits */ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); if (netdev->flags & IFF_PROMISC) { rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); /* Do not hardware filter VLANs in promisc mode */ e1000e_vlan_filter_disable(adapter); } else { int count; if (netdev->flags & IFF_ALLMULTI) { rctl |= E1000_RCTL_MPE; } else { /* Write addresses to the MTA, if the attempt fails * then we should just turn on promiscuous mode so * that we can at least receive multicast traffic */ count = e1000e_write_mc_addr_list(netdev); if (count < 0) rctl |= E1000_RCTL_MPE; } e1000e_vlan_filter_enable(adapter); /* Write addresses to available RAR registers, if there is not * sufficient space to store all the addresses then enable * unicast promiscuous mode */ count = e1000e_write_uc_addr_list(netdev); if (count < 0) rctl |= E1000_RCTL_UPE; } ew32(RCTL, rctl); if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) e1000e_vlan_strip_enable(adapter); else e1000e_vlan_strip_disable(adapter); } static void e1000e_setup_rss_hash(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 mrqc, rxcsum; u32 rss_key[10]; int i; netdev_rss_key_fill(rss_key, sizeof(rss_key)); for (i = 0; i < 10; i++) ew32(RSSRK(i), rss_key[i]); /* Direct all traffic to queue 0 */ for (i = 0; i < 32; i++) ew32(RETA(i), 0); /* Disable raw packet checksumming so that RSS hash is placed in * descriptor on writeback. */ rxcsum = er32(RXCSUM); rxcsum |= E1000_RXCSUM_PCSD; ew32(RXCSUM, rxcsum); mrqc = (E1000_MRQC_RSS_FIELD_IPV4 | E1000_MRQC_RSS_FIELD_IPV4_TCP | E1000_MRQC_RSS_FIELD_IPV6 | E1000_MRQC_RSS_FIELD_IPV6_TCP | E1000_MRQC_RSS_FIELD_IPV6_TCP_EX); ew32(MRQC, mrqc); } /** * e1000e_get_base_timinca - get default SYSTIM time increment attributes * @adapter: board private structure * @timinca: pointer to returned time increment attributes * * Get attributes for incrementing the System Time Register SYSTIML/H at * the default base frequency, and set the cyclecounter shift value. **/ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) { struct e1000_hw *hw = &adapter->hw; u32 incvalue, incperiod, shift; /* Make sure clock is enabled on I217/I218/I219 before checking * the frequency */ if (((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) && !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) && !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) { u32 fextnvm7 = er32(FEXTNVM7); if (!(fextnvm7 & (1 << 0))) { ew32(FEXTNVM7, fextnvm7 | (1 << 0)); e1e_flush(); } } switch (hw->mac.type) { case e1000_pch2lan: case e1000_pch_lpt: case e1000_pch_spt: /* On I217, I218 and I219, the clock frequency is 25MHz * or 96MHz as indicated by the System Clock Frequency * Indication */ if (((hw->mac.type != e1000_pch_lpt) && (hw->mac.type != e1000_pch_spt)) || (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { /* Stable 96MHz frequency */ incperiod = INCPERIOD_96MHz; incvalue = INCVALUE_96MHz; shift = INCVALUE_SHIFT_96MHz; adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz; break; } /* fall-through */ case e1000_82574: case e1000_82583: /* Stable 25MHz frequency */ incperiod = INCPERIOD_25MHz; incvalue = INCVALUE_25MHz; shift = INCVALUE_SHIFT_25MHz; adapter->cc.shift = shift; break; default: return -EINVAL; } *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) | ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK)); return 0; } /** * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable * @adapter: board private structure * * Outgoing time stamping can be enabled and disabled. Play nice and * disable it when requested, although it shouldn't cause any overhead * when no packet needs it. At most one packet in the queue may be * marked for time stamping, otherwise it would be impossible to tell * for sure to which packet the hardware time stamp belongs. * * Incoming time stamping has to be configured via the hardware filters. * Not all combinations are supported, in particular event type has to be * specified. Matching the kind of event packet is not supported, with the * exception of "all V2 events regardless of level 2 or 4". **/ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, struct hwtstamp_config *config) { struct e1000_hw *hw = &adapter->hw; u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; u32 rxmtrl = 0; u16 rxudp = 0; bool is_l4 = false; bool is_l2 = false; u32 regval; s32 ret_val; if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) return -EINVAL; /* flags reserved for future extensions - must be zero */ if (config->flags) return -EINVAL; switch (config->tx_type) { case HWTSTAMP_TX_OFF: tsync_tx_ctl = 0; break; case HWTSTAMP_TX_ON: break; default: return -ERANGE; } switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: tsync_rx_ctl = 0; break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE; is_l4 = true; break; case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE; is_l4 = true; break; case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: /* Also time stamps V2 L2 Path Delay Request/Response */ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; is_l2 = true; break; case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: /* Also time stamps V2 L2 Path Delay Request/Response. */ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; is_l2 = true; break; case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: /* Hardware cannot filter just V2 L4 Sync messages; * fall-through to V2 (both L2 and L4) Sync. */ case HWTSTAMP_FILTER_PTP_V2_SYNC: /* Also time stamps V2 Path Delay Request/Response. */ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; is_l2 = true; is_l4 = true; break; case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: /* Hardware cannot filter just V2 L4 Delay Request messages; * fall-through to V2 (both L2 and L4) Delay Request. */ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: /* Also time stamps V2 Path Delay Request/Response. */ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; is_l2 = true; is_l4 = true; break; case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: /* Hardware cannot filter just V2 L4 or L2 Event messages; * fall-through to all V2 (both L2 and L4) Events. */ case HWTSTAMP_FILTER_PTP_V2_EVENT: tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2; config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; is_l2 = true; is_l4 = true; break; case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: /* For V1, the hardware can only filter Sync messages or * Delay Request messages but not both so fall-through to * time stamp all packets. */ case HWTSTAMP_FILTER_ALL: is_l2 = true; is_l4 = true; tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL; config->rx_filter = HWTSTAMP_FILTER_ALL; break; default: return -ERANGE; } adapter->hwtstamp_config = *config; /* enable/disable Tx h/w time stamping */ regval = er32(TSYNCTXCTL); regval &= ~E1000_TSYNCTXCTL_ENABLED; regval |= tsync_tx_ctl; ew32(TSYNCTXCTL, regval); if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) != (regval & E1000_TSYNCTXCTL_ENABLED)) { e_err("Timesync Tx Control register not set as expected\n"); return -EAGAIN; } /* enable/disable Rx h/w time stamping */ regval = er32(TSYNCRXCTL); regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK); regval |= tsync_rx_ctl; ew32(TSYNCRXCTL, regval); if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK)) != (regval & (E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK))) { e_err("Timesync Rx Control register not set as expected\n"); return -EAGAIN; } /* L2: define ethertype filter for time stamped packets */ if (is_l2) rxmtrl |= ETH_P_1588; /* define which PTP packets get time stamped */ ew32(RXMTRL, rxmtrl); /* Filter by destination port */ if (is_l4) { rxudp = PTP_EV_PORT; cpu_to_be16s(&rxudp); } ew32(RXUDP, rxudp); e1e_flush(); /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */ er32(RXSTMPH); er32(TXSTMPH); /* Get and set the System Time Register SYSTIM base frequency */ ret_val = e1000e_get_base_timinca(adapter, ®val); if (ret_val) return ret_val; ew32(TIMINCA, regval); /* reset the ns time counter */ timecounter_init(&adapter->tc, &adapter->cc, ktime_to_ns(ktime_get_real())); return 0; } /** * e1000_configure - configure the hardware for Rx and Tx * @adapter: private board structure **/ static void e1000_configure(struct e1000_adapter *adapter) { struct e1000_ring *rx_ring = adapter->rx_ring; e1000e_set_rx_mode(adapter->netdev); e1000_restore_vlan(adapter); e1000_init_manageability_pt(adapter); e1000_configure_tx(adapter); if (adapter->netdev->features & NETIF_F_RXHASH) e1000e_setup_rss_hash(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL); } /** * e1000e_power_up_phy - restore link in case the phy was powered down * @adapter: address of board private structure * * The phy may be powered down to save power and turn off link when the * driver is unloaded and wake on lan is not enabled (among others) * *** this routine MUST be followed by a call to e1000e_reset *** **/ void e1000e_power_up_phy(struct e1000_adapter *adapter) { if (adapter->hw.phy.ops.power_up) adapter->hw.phy.ops.power_up(&adapter->hw); adapter->hw.mac.ops.setup_link(&adapter->hw); } /** * e1000_power_down_phy - Power down the PHY * * Power down the PHY so no link is implied when interface is down. * The PHY cannot be powered down if management or WoL is active. */ static void e1000_power_down_phy(struct e1000_adapter *adapter) { if (adapter->hw.phy.ops.power_down) adapter->hw.phy.ops.power_down(&adapter->hw); } /** * e1000e_reset - bring the hardware into a known good state * * This function boots the hardware and enables some settings that * require a configuration cycle of the hardware - those cannot be * set/changed during runtime. After reset the device needs to be * properly configured for Rx, Tx etc. */ void e1000e_reset(struct e1000_adapter *adapter) { struct e1000_mac_info *mac = &adapter->hw.mac; struct e1000_fc_info *fc = &adapter->hw.fc; struct e1000_hw *hw = &adapter->hw; u32 tx_space, min_tx_space, min_rx_space; u32 pba = adapter->pba; u16 hwm; /* reset Packet Buffer Allocation to default */ ew32(PBA, pba); if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { /* To maintain wire speed transmits, the Tx FIFO should be * large enough to accommodate two full transmit packets, * rounded up to the next 1KB and expressed in KB. Likewise, * the Rx FIFO should be large enough to accommodate at least * one full receive packet and is similarly rounded up and * expressed in KB. */ pba = er32(PBA); /* upper 16 bits has Tx packet buffer allocation size in KB */ tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; /* the Tx fifo also stores 16 bytes of information about the Tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (adapter->max_frame_size + sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2; min_tx_space = ALIGN(min_tx_space, 1024); min_tx_space >>= 10; /* software strips receive CRC, so leave room for it */ min_rx_space = adapter->max_frame_size; min_rx_space = ALIGN(min_rx_space, 1024); min_rx_space >>= 10; /* If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO * allocation, take space away from current Rx allocation */ if ((tx_space < min_tx_space) && ((min_tx_space - tx_space) < pba)) { pba -= min_tx_space - tx_space; /* if short on Rx space, Rx wins and must trump Tx * adjustment */ if (pba < min_rx_space) pba = min_rx_space; } ew32(PBA, pba); } /* flow control settings * * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, and * - the full Rx FIFO size minus one full frame */ if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) fc->pause_time = 0xFFFF; else fc->pause_time = E1000_FC_PAUSE_TIME; fc->send_xon = true; fc->current_mode = fc->requested_mode; switch (hw->mac.type) { case e1000_ich9lan: case e1000_ich10lan: if (adapter->netdev->mtu > ETH_DATA_LEN) { pba = 14; ew32(PBA, pba); fc->high_water = 0x2800; fc->low_water = fc->high_water - 8; break; } /* fall-through */ default: hwm = min(((pba << 10) * 9 / 10), ((pba << 10) - adapter->max_frame_size)); fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ fc->low_water = fc->high_water - 8; break; case e1000_pchlan: /* Workaround PCH LOM adapter hangs with certain network * loads. If hangs persist, try disabling Tx flow control. */ if (adapter->netdev->mtu > ETH_DATA_LEN) { fc->high_water = 0x3500; fc->low_water = 0x1500; } else { fc->high_water = 0x5000; fc->low_water = 0x3000; } fc->refresh_time = 0x1000; break; case e1000_pch2lan: case e1000_pch_lpt: case e1000_pch_spt: fc->refresh_time = 0x0400; if (adapter->netdev->mtu <= ETH_DATA_LEN) { fc->high_water = 0x05C20; fc->low_water = 0x05048; fc->pause_time = 0x0650; break; } pba = 14; ew32(PBA, pba); fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH; fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL; break; } /* Alignment of Tx data is on an arbitrary byte boundary with the * maximum size per Tx descriptor limited only to the transmit * allocation of the packet buffer minus 96 bytes with an upper * limit of 24KB due to receive synchronization limitations. */ adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, 24 << 10); /* Disable Adaptive Interrupt Moderation if 2 full packets cannot * fit in receive buffer. */ if (adapter->itr_setting & 0x3) { if ((adapter->max_frame_size * 2) > (pba << 10)) { if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) { dev_info(&adapter->pdev->dev, "Interrupt Throttle Rate off\n"); adapter->flags2 |= FLAG2_DISABLE_AIM; e1000e_write_itr(adapter, 0); } } else if (adapter->flags2 & FLAG2_DISABLE_AIM) { dev_info(&adapter->pdev->dev, "Interrupt Throttle Rate on\n"); adapter->flags2 &= ~FLAG2_DISABLE_AIM; adapter->itr = 20000; e1000e_write_itr(adapter, adapter->itr); } } /* Allow time for pending master requests to run */ mac->ops.reset_hw(hw); /* For parts with AMT enabled, let the firmware know * that the network interface is in control */ if (adapter->flags & FLAG_HAS_AMT) e1000e_get_hw_control(adapter); ew32(WUC, 0); if (mac->ops.init_hw(hw)) e_err("Hardware Error\n"); e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ ew32(VET, ETH_P_8021Q); e1000e_reset_adaptive(hw); /* initialize systim and reset the ns time counter */ e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config); /* Set EEE advertisement as appropriate */ if (adapter->flags2 & FLAG2_HAS_EEE) { s32 ret_val; u16 adv_addr; switch (hw->phy.type) { case e1000_phy_82579: adv_addr = I82579_EEE_ADVERTISEMENT; break; case e1000_phy_i217: adv_addr = I217_EEE_ADVERTISEMENT; break; default: dev_err(&adapter->pdev->dev, "Invalid PHY type setting EEE advertisement\n"); return; } ret_val = hw->phy.ops.acquire(hw); if (ret_val) { dev_err(&adapter->pdev->dev, "EEE advertisement - unable to acquire PHY\n"); return; } e1000_write_emi_reg_locked(hw, adv_addr, hw->dev_spec.ich8lan.eee_disable ? 0 : adapter->eee_advert); hw->phy.ops.release(hw); } if (!netif_running(adapter->netdev) && !test_bit(__E1000_TESTING, &adapter->state)) e1000_power_down_phy(adapter); e1000_get_phy_info(hw); if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && !(adapter->flags & FLAG_SMART_POWER_DOWN)) { u16 phy_data = 0; /* speed up time to link by disabling smart power down, ignore * the return value of this function because there is nothing * different we would do if it failed */ e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); phy_data &= ~IGP02E1000_PM_SPD; e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); } } int e1000e_up(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; /* hardware has been reset, we need to reload some things */ e1000_configure(adapter); clear_bit(__E1000_DOWN, &adapter->state); if (adapter->msix_entries) e1000_configure_msix(adapter); e1000_irq_enable(adapter); netif_start_queue(adapter->netdev); /* fire a link change interrupt to start the watchdog */ if (adapter->msix_entries) ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); else ew32(ICS, E1000_ICS_LSC); return 0; } static void e1000e_flush_descriptors(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; if (!(adapter->flags2 & FLAG2_DMA_BURST)) return; /* flush pending descriptor writebacks to memory */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); /* execute the writes immediately */ e1e_flush(); /* due to rare timing issues, write to TIDV/RDTR again to ensure the * write is successful */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); /* execute the writes immediately */ e1e_flush(); } static void e1000e_update_stats(struct e1000_adapter *adapter); /** * e1000e_down - quiesce the device and optionally reset the hardware * @adapter: board private structure * @reset: boolean flag to reset the hardware or not */ void e1000e_down(struct e1000_adapter *adapter, bool reset) { struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; u32 tctl, rctl; /* signal that we're down so the interrupt handler does not * reschedule our watchdog timer */ set_bit(__E1000_DOWN, &adapter->state); netif_carrier_off(netdev); /* disable receives in the hardware */ rctl = er32(RCTL); if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) ew32(RCTL, rctl & ~E1000_RCTL_EN); /* flush and sleep below */ netif_stop_queue(netdev); /* disable transmits in the hardware */ tctl = er32(TCTL); tctl &= ~E1000_TCTL_EN; ew32(TCTL, tctl); /* flush both disables and wait for them to finish */ e1e_flush(); usleep_range(10000, 20000); e1000_irq_disable(adapter); napi_synchronize(&adapter->napi); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); spin_lock(&adapter->stats64_lock); e1000e_update_stats(adapter); spin_unlock(&adapter->stats64_lock); e1000e_flush_descriptors(adapter); e1000_clean_tx_ring(adapter->tx_ring); e1000_clean_rx_ring(adapter->rx_ring); adapter->link_speed = 0; adapter->link_duplex = 0; /* Disable Si errata workaround on PCHx for jumbo frame flow */ if ((hw->mac.type >= e1000_pch2lan) && (adapter->netdev->mtu > ETH_DATA_LEN) && e1000_lv_jumbo_workaround_ich8lan(hw, false)) e_dbg("failed to disable jumbo frame workaround mode\n"); if (reset && !pci_channel_offline(adapter->pdev)) e1000e_reset(adapter); } void e1000e_reinit_locked(struct e1000_adapter *adapter) { might_sleep(); while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); e1000e_down(adapter, true); e1000e_up(adapter); clear_bit(__E1000_RESETTING, &adapter->state); } /** * e1000e_cyclecounter_read - read raw cycle counter (used by time counter) * @cc: cyclecounter structure **/ static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) { struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, cc); struct e1000_hw *hw = &adapter->hw; cycle_t systim, systim_next; /* latch SYSTIMH on read of SYSTIML */ systim = (cycle_t)er32(SYSTIML); systim |= (cycle_t)er32(SYSTIMH) << 32; if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) { u64 incvalue, time_delta, rem, temp; int i; /* errata for 82574/82583 possible bad bits read from SYSTIMH/L * check to see that the time is incrementing at a reasonable * rate and is a multiple of incvalue */ incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK; for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) { /* latch SYSTIMH on read of SYSTIML */ systim_next = (cycle_t)er32(SYSTIML); systim_next |= (cycle_t)er32(SYSTIMH) << 32; time_delta = systim_next - systim; temp = time_delta; rem = do_div(temp, incvalue); systim = systim_next; if ((time_delta < E1000_82574_SYSTIM_EPSILON) && (rem == 0)) break; } } return systim; } /** * e1000_sw_init - Initialize general software structures (struct e1000_adapter) * @adapter: board private structure to initialize * * e1000_sw_init initializes the Adapter private data structure. * Fields are initialized based on PCI device information and * OS network device settings (MTU size). **/ static int e1000_sw_init(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; adapter->rx_ps_bsize0 = 128; adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; adapter->tx_ring_count = E1000_DEFAULT_TXD; adapter->rx_ring_count = E1000_DEFAULT_RXD; spin_lock_init(&adapter->stats64_lock); e1000e_set_interrupt_capability(adapter); if (e1000_alloc_queues(adapter)) return -ENOMEM; /* Setup hardware time stamping cyclecounter */ if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { adapter->cc.read = e1000e_cyclecounter_read; adapter->cc.mask = CYCLECOUNTER_MASK(64); adapter->cc.mult = 1; /* cc.shift set in e1000e_get_base_tininca() */ spin_lock_init(&adapter->systim_lock); INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work); } /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); set_bit(__E1000_DOWN, &adapter->state); return 0; } /** * e1000_intr_msi_test - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure **/ static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); e_dbg("icr is %08X\n", icr); if (icr & E1000_ICR_RXSEQ) { adapter->flags &= ~FLAG_MSI_TEST_FAILED; /* Force memory writes to complete before acknowledging the * interrupt is handled. */ wmb(); } return IRQ_HANDLED; } /** * e1000_test_msi_interrupt - Returns 0 for successful test * @adapter: board private struct * * code flow taken from tg3.c **/ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; int err; /* poll_enable hasn't been called yet, so don't need disable */ /* clear any pending events */ er32(ICR); /* free the real vector and request a test handler */ e1000_free_irq(adapter); e1000e_reset_interrupt_capability(adapter); /* Assume that the test fails, if it succeeds then the test * MSI irq handler will unset this flag */ adapter->flags |= FLAG_MSI_TEST_FAILED; err = pci_enable_msi(adapter->pdev); if (err) goto msi_test_failed; err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0, netdev->name, netdev); if (err) { pci_disable_msi(adapter->pdev); goto msi_test_failed; } /* Force memory writes to complete before enabling and firing an * interrupt. */ wmb(); e1000_irq_enable(adapter); /* fire an unusual interrupt on the test handler */ ew32(ICS, E1000_ICS_RXSEQ); e1e_flush(); msleep(100); e1000_irq_disable(adapter); rmb(); /* read flags after interrupt has been fired */ if (adapter->flags & FLAG_MSI_TEST_FAILED) { adapter->int_mode = E1000E_INT_MODE_LEGACY; e_info("MSI interrupt test failed, using legacy interrupt.\n"); } else { e_dbg("MSI interrupt test succeeded!\n"); } free_irq(adapter->pdev->irq, netdev); pci_disable_msi(adapter->pdev); msi_test_failed: e1000e_set_interrupt_capability(adapter); return e1000_request_irq(adapter); } /** * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored * @adapter: board private struct * * code flow taken from tg3.c, called with e1000 interrupts disabled. **/ static int e1000_test_msi(struct e1000_adapter *adapter) { int err; u16 pci_cmd; if (!(adapter->flags & FLAG_MSI_ENABLED)) return 0; /* disable SERR in case the MSI write causes a master abort */ pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); if (pci_cmd & PCI_COMMAND_SERR) pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd & ~PCI_COMMAND_SERR); err = e1000_test_msi_interrupt(adapter); /* re-enable SERR */ if (pci_cmd & PCI_COMMAND_SERR) { pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); pci_cmd |= PCI_COMMAND_SERR; pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd); } return err; } /** * e1000_open - Called when a network interface is made active * @netdev: network interface device structure * * Returns 0 on success, negative value on failure * * The open entry point is called when a network interface is made * active by the system (IFF_UP). At this point all resources needed * for transmit and receive operations are allocated, the interrupt * handler is registered with the OS, the watchdog timer is started, * and the stack is notified that the interface is ready. **/ static int e1000_open(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; int err; /* disallow open during test */ if (test_bit(__E1000_TESTING, &adapter->state)) return -EBUSY; pm_runtime_get_sync(&pdev->dev); netif_carrier_off(netdev); /* allocate transmit descriptors */ err = e1000e_setup_tx_resources(adapter->tx_ring); if (err) goto err_setup_tx; /* allocate receive descriptors */ err = e1000e_setup_rx_resources(adapter->rx_ring); if (err) goto err_setup_rx; /* If AMT is enabled, let the firmware know that the network * interface is now open and reset the part to a known state. */ if (adapter->flags & FLAG_HAS_AMT) { e1000e_get_hw_control(adapter); e1000e_reset(adapter); } e1000e_power_up_phy(adapter); adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) e1000_update_mng_vlan(adapter); /* DMA latency requirement to workaround jumbo issue */ pm_qos_add_request(&adapter->netdev->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE); /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our * clean_rx handler before we do so. */ e1000_configure(adapter); err = e1000_request_irq(adapter); if (err) goto err_req_irq; /* Work around PCIe errata with MSI interrupts causing some chipsets to * ignore e1000e MSI messages, which means we need to test our MSI * interrupt now */ if (adapter->int_mode != E1000E_INT_MODE_LEGACY) { err = e1000_test_msi(adapter); if (err) { e_err("Interrupt allocation failed\n"); goto err_req_irq; } } /* From here on the code is the same as e1000e_up() */ clear_bit(__E1000_DOWN, &adapter->state); napi_enable(&adapter->napi); e1000_irq_enable(adapter); adapter->tx_hang_recheck = false; netif_start_queue(netdev); hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); /* fire a link status change interrupt to start the watchdog */ if (adapter->msix_entries) ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); else ew32(ICS, E1000_ICS_LSC); return 0; err_req_irq: e1000e_release_hw_control(adapter); e1000_power_down_phy(adapter); e1000e_free_rx_resources(adapter->rx_ring); err_setup_rx: e1000e_free_tx_resources(adapter->tx_ring); err_setup_tx: e1000e_reset(adapter); pm_runtime_put_sync(&pdev->dev); return err; } /** * e1000_close - Disables a network interface * @netdev: network interface device structure * * Returns 0, this is not allowed to fail * * The close entry point is called when an interface is de-activated * by the OS. The hardware is still under the drivers control, but * needs to be disabled. A global MAC reset is issued to stop the * hardware, and all transmit and receive resources are freed. **/ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev = adapter->pdev; int count = E1000_CHECK_RESET_COUNT; while (test_bit(__E1000_RESETTING, &adapter->state) && count--) usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); pm_runtime_get_sync(&pdev->dev); if (!test_bit(__E1000_DOWN, &adapter->state)) { e1000e_down(adapter, true); e1000_free_irq(adapter); /* Link status message must follow this format */ pr_info("%s NIC Link is Down\n", adapter->netdev->name); } napi_disable(&adapter->napi); e1000e_free_tx_resources(adapter->tx_ring); e1000e_free_rx_resources(adapter->rx_ring); /* kill manageability vlan ID if supported, but not if a vlan with * the same ID is registered on the host OS (let 8021q kill it) */ if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), adapter->mng_vlan_id); /* If AMT is enabled, let the firmware know that the network * interface is now closed */ if ((adapter->flags & FLAG_HAS_AMT) && !test_bit(__E1000_TESTING, &adapter->state)) e1000e_release_hw_control(adapter); pm_qos_remove_request(&adapter->netdev->pm_qos_req); pm_runtime_put_sync(&pdev->dev); return 0; } /** * e1000_set_mac - Change the Ethernet Address of the NIC * @netdev: network interface device structure * @p: pointer to an address structure * * Returns 0 on success, negative on failure **/ static int e1000_set_mac(struct net_device *netdev, void *p) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct sockaddr *addr = p; if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0); if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) { /* activate the work around */ e1000e_set_laa_state_82571(&adapter->hw, 1); /* Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed (in e1000_watchdog), the actual LAA is in one * of the RARs and no incoming packets directed to this port * are dropped. Eventually the LAA will be in RAR[0] and * RAR[14] */ hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, adapter->hw.mac.rar_entry_count - 1); } return 0; } /** * e1000e_update_phy_task - work thread to update phy * @work: pointer to our work struct * * this worker thread exists because we must acquire a * semaphore to read the phy, which we could msleep while * waiting for it, and we can't msleep in a timer. **/ static void e1000e_update_phy_task(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, update_phy_task); struct e1000_hw *hw = &adapter->hw; if (test_bit(__E1000_DOWN, &adapter->state)) return; e1000_get_phy_info(hw); /* Enable EEE on 82579 after link up */ if (hw->phy.type >= e1000_phy_82579) e1000_set_eee_pchlan(hw); } /** * e1000_update_phy_info - timre call-back to update PHY info * @data: pointer to adapter cast into an unsigned long * * Need to wait a few seconds after link up to get diagnostic information from * the phy **/ static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *)data; if (test_bit(__E1000_DOWN, &adapter->state)) return; schedule_work(&adapter->update_phy_task); } /** * e1000e_update_phy_stats - Update the PHY statistics counters * @adapter: board private structure * * Read/clear the upper 16-bit PHY registers and read/accumulate lower **/ static void e1000e_update_phy_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; s32 ret_val; u16 phy_data; ret_val = hw->phy.ops.acquire(hw); if (ret_val) return; /* A page set is expensive so check if already on desired page. * If not, set to the page with the PHY status registers. */ hw->phy.addr = 1; ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, &phy_data); if (ret_val) goto release; if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) { ret_val = hw->phy.ops.set_page(hw, HV_STATS_PAGE << IGP_PAGE_SHIFT); if (ret_val) goto release; } /* Single Collision Count */ hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data); ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data); if (!ret_val) adapter->stats.scc += phy_data; /* Excessive Collision Count */ hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data); ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data); if (!ret_val) adapter->stats.ecol += phy_data; /* Multiple Collision Count */ hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data); ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data); if (!ret_val) adapter->stats.mcc += phy_data; /* Late Collision Count */ hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data); ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data); if (!ret_val) adapter->stats.latecol += phy_data; /* Collision Count - also used for adaptive IFS */ hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data); ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data); if (!ret_val) hw->mac.collision_delta = phy_data; /* Defer Count */ hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data); ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data); if (!ret_val) adapter->stats.dc += phy_data; /* Transmit with no CRS */ hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data); ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data); if (!ret_val) adapter->stats.tncrs += phy_data; release: hw->phy.ops.release(hw); } /** * e1000e_update_stats - Update the board statistics counters * @adapter: board private structure **/ static void e1000e_update_stats(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; /* Prevent stats update while adapter is being reset, or if the pci * connection is down. */ if (adapter->link_speed == 0) return; if (pci_channel_offline(pdev)) return; adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); er32(GORCH); /* Clear gorc */ adapter->stats.bprc += er32(BPRC); adapter->stats.mprc += er32(MPRC); adapter->stats.roc += er32(ROC); adapter->stats.mpc += er32(MPC); /* Half-duplex statistics */ if (adapter->link_duplex == HALF_DUPLEX) { if (adapter->flags2 & FLAG2_HAS_PHY_STATS) { e1000e_update_phy_stats(adapter); } else { adapter->stats.scc += er32(SCC); adapter->stats.ecol += er32(ECOL); adapter->stats.mcc += er32(MCC); adapter->stats.latecol += er32(LATECOL); adapter->stats.dc += er32(DC); hw->mac.collision_delta = er32(COLC); if ((hw->mac.type != e1000_82574) && (hw->mac.type != e1000_82583)) adapter->stats.tncrs += er32(TNCRS); } adapter->stats.colc += hw->mac.collision_delta; } adapter->stats.xonrxc += er32(XONRXC); adapter->stats.xontxc += er32(XONTXC); adapter->stats.xoffrxc += er32(XOFFRXC); adapter->stats.xofftxc += er32(XOFFTXC); adapter->stats.gptc += er32(GPTC); adapter->stats.gotc += er32(GOTCL); er32(GOTCH); /* Clear gotc */ adapter->stats.rnbc += er32(RNBC); adapter->stats.ruc += er32(RUC); adapter->stats.mptc += er32(MPTC); adapter->stats.bptc += er32(BPTC); /* used for adaptive IFS */ hw->mac.tx_packet_delta = er32(TPT); adapter->stats.tpt += hw->mac.tx_packet_delta; adapter->stats.algnerrc += er32(ALGNERRC); adapter->stats.rxerrc += er32(RXERRC); adapter->stats.cexterr += er32(CEXTERR); adapter->stats.tsctc += er32(TSCTC); adapter->stats.tsctfc += er32(TSCTFC); /* Fill out the OS statistics structure */ netdev->stats.multicast = adapter->stats.mprc; netdev->stats.collisions = adapter->stats.colc; /* Rx Errors */ /* RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ netdev->stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; netdev->stats.rx_length_errors = adapter->stats.ruc + adapter->stats.roc; netdev->stats.rx_crc_errors = adapter->stats.crcerrs; netdev->stats.rx_frame_errors = adapter->stats.algnerrc; netdev->stats.rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol; netdev->stats.tx_aborted_errors = adapter->stats.ecol; netdev->stats.tx_window_errors = adapter->stats.latecol; netdev->stats.tx_carrier_errors = adapter->stats.tncrs; /* Tx Dropped needs to be maintained elsewhere */ /* Management Stats */ adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); /* Correctable ECC Errors */ if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { u32 pbeccsts = er32(PBECCSTS); adapter->corr_errors += pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; adapter->uncorr_errors += (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; } } /** * e1000_phy_read_status - Update the PHY register status snapshot * @adapter: board private structure **/ static void e1000_phy_read_status(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) && (er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa); ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion); ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000); ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000); ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); } else { /* Do not read PHY registers if link is not up * Set values to typical power-on defaults */ phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX); phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE | BMSR_ERCAP); phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP | ADVERTISE_ALL | ADVERTISE_CSMA); phy->lpa = 0; phy->expansion = EXPANSION_ENABLENPAGE; phy->ctrl1000 = ADVERTISE_1000FULL; phy->stat1000 = 0; phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); } } static void e1000_print_link_info(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl = er32(CTRL); /* Link status message must follow this format for user tools */ pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", adapter->netdev->name, adapter->link_speed, adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half", (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" : (ctrl & E1000_CTRL_RFCE) ? "Rx" : (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None"); } static bool e1000e_has_link(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; bool link_active = false; s32 ret_val = 0; /* get_link_status is set on LSC (link status) interrupt or * Rx sequence error interrupt. get_link_status will stay * false until the check_for_link establishes link * for copper adapters ONLY */ switch (hw->phy.media_type) { case e1000_media_type_copper: if (hw->mac.get_link_status) { ret_val = hw->mac.ops.check_for_link(hw); link_active = !hw->mac.get_link_status; } else { link_active = true; } break; case e1000_media_type_fiber: ret_val = hw->mac.ops.check_for_link(hw); link_active = !!(er32(STATUS) & E1000_STATUS_LU); break; case e1000_media_type_internal_serdes: ret_val = hw->mac.ops.check_for_link(hw); link_active = adapter->hw.mac.serdes_has_link; break; default: case e1000_media_type_unknown: break; } if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ e_info("Gigabit has been disabled, downgrading speed\n"); } return link_active; } static void e1000e_enable_receives(struct e1000_adapter *adapter) { /* make sure the receive unit is started */ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && (adapter->flags & FLAG_RESTART_NOW)) { struct e1000_hw *hw = &adapter->hw; u32 rctl = er32(RCTL); ew32(RCTL, rctl | E1000_RCTL_EN); adapter->flags &= ~FLAG_RESTART_NOW; } } static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; /* With 82574 controllers, PHY needs to be checked periodically * for hung state and reset, if two calls return true */ if (e1000_check_phy_82574(hw)) adapter->phy_hang_count++; else adapter->phy_hang_count = 0; if (adapter->phy_hang_count > 1) { adapter->phy_hang_count = 0; e_dbg("PHY appears hung - resetting\n"); schedule_work(&adapter->reset_task); } } /** * e1000_watchdog - Timer Call-back * @data: pointer to adapter cast into an unsigned long **/ static void e1000_watchdog(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *)data; /* Do the rest outside of interrupt context */ schedule_work(&adapter->watchdog_task); /* TODO: make this use queue_delayed_work() */ } static void e1000_watchdog_task(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, watchdog_task); struct net_device *netdev = adapter->netdev; struct e1000_mac_info *mac = &adapter->hw.mac; struct e1000_phy_info *phy = &adapter->hw.phy; struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_hw *hw = &adapter->hw; u32 link, tctl; if (test_bit(__E1000_DOWN, &adapter->state)) return; link = e1000e_has_link(adapter); if ((netif_carrier_ok(netdev)) && link) { /* Cancel scheduled suspend requests. */ pm_runtime_resume(netdev->dev.parent); e1000e_enable_receives(adapter); goto link_up; } if ((e1000e_enable_tx_pkt_filtering(hw)) && (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)) e1000_update_mng_vlan(adapter); if (link) { if (!netif_carrier_ok(netdev)) { bool txb2b = true; /* Cancel scheduled suspend requests. */ pm_runtime_resume(netdev->dev.parent); /* update snapshot of PHY registers on LSC */ e1000_phy_read_status(adapter); mac->ops.get_link_up_info(&adapter->hw, &adapter->link_speed, &adapter->link_duplex); e1000_print_link_info(adapter); /* check if SmartSpeed worked */ e1000e_check_downshift(hw); if (phy->speed_downgraded) netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n"); /* On supported PHYs, check for duplex mismatch only * if link has autonegotiated at 10/100 half */ if ((hw->phy.type == e1000_phy_igp_3 || hw->phy.type == e1000_phy_bm) && hw->mac.autoneg && (adapter->link_speed == SPEED_10 || adapter->link_speed == SPEED_100) && (adapter->link_duplex == HALF_DUPLEX)) { u16 autoneg_exp; e1e_rphy(hw, MII_EXPANSION, &autoneg_exp); if (!(autoneg_exp & EXPANSION_NWAY)) e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n"); } /* adjust timeout factor according to speed/duplex */ adapter->tx_timeout_factor = 1; switch (adapter->link_speed) { case SPEED_10: txb2b = false; adapter->tx_timeout_factor = 16; break; case SPEED_100: txb2b = false; adapter->tx_timeout_factor = 10; break; } /* workaround: re-program speed mode bit after * link-up event */ if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && !txb2b) { u32 tarc0; tarc0 = er32(TARC(0)); tarc0 &= ~SPEED_MODE_BIT; ew32(TARC(0), tarc0); } /* disable TSO for pcie and 10/100 speeds, to avoid * some hardware issues */ if (!(adapter->flags & FLAG_TSO_FORCE)) { switch (adapter->link_speed) { case SPEED_10: case SPEED_100: e_info("10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; netdev->features &= ~NETIF_F_TSO6; break; case SPEED_1000: netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; break; default: /* oops */ break; } } /* enable transmits in the hardware, need to do this * after setting TARC(0) */ tctl = er32(TCTL); tctl |= E1000_TCTL_EN; ew32(TCTL, tctl); /* Perform any post-link-up configuration before * reporting link up. */ if (phy->ops.cfg_on_link_up) phy->ops.cfg_on_link_up(hw); netif_carrier_on(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); } } else { if (netif_carrier_ok(netdev)) { adapter->link_speed = 0; adapter->link_duplex = 0; /* Link status message must follow this format */ pr_info("%s NIC Link is Down\n", adapter->netdev->name); netif_carrier_off(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); /* 8000ES2LAN requires a Rx packet buffer work-around * on link down event; reset the controller to flush * the Rx packet buffer. */ if (adapter->flags & FLAG_RX_NEEDS_RESTART) adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, LINK_TIMEOUT); } } link_up: spin_lock(&adapter->stats64_lock); e1000e_update_stats(adapter); mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; adapter->tpt_old = adapter->stats.tpt; mac->collision_delta = adapter->stats.colc - adapter->colc_old; adapter->colc_old = adapter->stats.colc; adapter->gorc = adapter->stats.gorc - adapter->gorc_old; adapter->gorc_old = adapter->stats.gorc; adapter->gotc = adapter->stats.gotc - adapter->gotc_old; adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock); /* If the link is lost the controller stops DMA, but * if there is queued Tx work it cannot be done. So * reset the controller to flush the Tx packet buffers. */ if (!netif_carrier_ok(netdev) && (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) adapter->flags |= FLAG_RESTART_NOW; /* If reset is necessary, do it outside of interrupt context. */ if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ return; } e1000e_update_adaptive(&adapter->hw); /* Simple mode for Interrupt Throttle Rate (ITR) */ if (adapter->itr_setting == 4) { /* Symmetric Tx/Rx gets a reduced ITR=2000; * Total asymmetrical Tx or Rx gets ITR=8000; * everyone else is between 2000-8000. */ u32 goc = (adapter->gotc + adapter->gorc) / 10000; u32 dif = (adapter->gotc > adapter->gorc ? adapter->gotc - adapter->gorc : adapter->gorc - adapter->gotc) / 10000; u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000; e1000e_write_itr(adapter, itr); } /* Cause software interrupt to ensure Rx ring is cleaned */ if (adapter->msix_entries) ew32(ICS, adapter->rx_ring->ims_val); else ew32(ICS, E1000_ICS_RXDMT0); /* flush pending descriptors to memory before detecting Tx hang */ e1000e_flush_descriptors(adapter); /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = true; /* With 82571 controllers, LAA may be overwritten due to controller * reset from the other port. Set the appropriate LAA in RAR[0] */ if (e1000e_get_laa_state_82571(hw)) hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0); if (adapter->flags2 & FLAG2_CHECK_PHY_HANG) e1000e_check_82574_phy_workaround(adapter); /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */ if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) { if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) && (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) { er32(RXSTMPH); adapter->rx_hwtstamp_cleared++; } else { adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP; } } /* Reset the timer */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ)); } #define E1000_TX_FLAGS_CSUM 0x00000001 #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 #define E1000_TX_FLAGS_IPV4 0x00000008 #define E1000_TX_FLAGS_NO_FCS 0x00000010 #define E1000_TX_FLAGS_HWTSTAMP 0x00000020 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb, __be16 protocol) { struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; unsigned int i; u32 cmd_length = 0; u16 ipcse = 0, mss; u8 ipcss, ipcso, tucss, tucso, hdr_len; int err; if (!skb_is_gso(skb)) return 0; err = skb_cow_head(skb, 0); if (err < 0) return err; hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; if (protocol == htons(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); iph->tot_len = 0; iph->check = 0; tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, 0, IPPROTO_TCP, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb_transport_offset(skb) - 1; } else if (skb_is_gso_v6(skb)) { ipv6_hdr(skb)->payload_len = 0; tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); ipcse = 0; } ipcss = skb_network_offset(skb); ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; tucss = skb_transport_offset(skb); tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); i = tx_ring->next_to_use; context_desc = E1000_CONTEXT_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; context_desc->lower_setup.ip_fields.ipcss = ipcss; context_desc->lower_setup.ip_fields.ipcso = ipcso; context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); context_desc->upper_setup.tcp_fields.tucss = tucss; context_desc->upper_setup.tcp_fields.tucso = tucso; context_desc->upper_setup.tcp_fields.tucse = 0; context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; context_desc->cmd_and_length = cpu_to_le32(cmd_length); buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; i++; if (i == tx_ring->count) i = 0; tx_ring->next_to_use = i; return 1; } static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb, __be16 protocol) { struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; unsigned int i; u8 css; u32 cmd_len = E1000_TXD_CMD_DEXT; if (skb->ip_summed != CHECKSUM_PARTIAL) return false; switch (protocol) { case cpu_to_be16(ETH_P_IP): if (ip_hdr(skb)->protocol == IPPROTO_TCP) cmd_len |= E1000_TXD_CMD_TCP; break; case cpu_to_be16(ETH_P_IPV6): /* XXX not handling all IPV6 headers */ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) cmd_len |= E1000_TXD_CMD_TCP; break; default: if (unlikely(net_ratelimit())) e_warn("checksum_partial proto=%x!\n", be16_to_cpu(protocol)); break; } css = skb_checksum_start_offset(skb); i = tx_ring->next_to_use; buffer_info = &tx_ring->buffer_info[i]; context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->lower_setup.ip_config = 0; context_desc->upper_setup.tcp_fields.tucss = css; context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset; context_desc->upper_setup.tcp_fields.tucse = 0; context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(cmd_len); buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; i++; if (i == tx_ring->count) i = 0; tx_ring->next_to_use = i; return true; } static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, unsigned int first, unsigned int max_per_txd, unsigned int nr_frags) { struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; struct e1000_buffer *buffer_info; unsigned int len = skb_headlen(skb); unsigned int offset = 0, size, count = 0, i; unsigned int f, bytecount, segs; i = tx_ring->next_to_use; while (len) { buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); buffer_info->length = size; buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; buffer_info->dma = dma_map_single(&pdev->dev, skb->data + offset, size, DMA_TO_DEVICE); buffer_info->mapped_as_page = false; if (dma_mapping_error(&pdev->dev, buffer_info->dma)) goto dma_error; len -= size; offset += size; count++; if (len) { i++; if (i == tx_ring->count) i = 0; } } for (f = 0; f < nr_frags; f++) { const struct skb_frag_struct *frag; frag = &skb_shinfo(skb)->frags[f]; len = skb_frag_size(frag); offset = 0; while (len) { i++; if (i == tx_ring->count) i = 0; buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); buffer_info->length = size; buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, offset, size, DMA_TO_DEVICE); buffer_info->mapped_as_page = true; if (dma_mapping_error(&pdev->dev, buffer_info->dma)) goto dma_error; len -= size; offset += size; count++; } } segs = skb_shinfo(skb)->gso_segs ? : 1; /* multiply data chunks by size of headers */ bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len; tx_ring->buffer_info[i].skb = skb; tx_ring->buffer_info[i].segs = segs; tx_ring->buffer_info[i].bytecount = bytecount; tx_ring->buffer_info[first].next_to_watch = i; return count; dma_error: dev_err(&pdev->dev, "Tx DMA map failed\n"); buffer_info->dma = 0; if (count) count--; while (count--) { if (i == 0) i += tx_ring->count; i--; buffer_info = &tx_ring->buffer_info[i]; e1000_put_txbuf(tx_ring, buffer_info); } return 0; } static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) { struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_tx_desc *tx_desc = NULL; struct e1000_buffer *buffer_info; u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; unsigned int i; if (tx_flags & E1000_TX_FLAGS_TSO) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | E1000_TXD_CMD_TSE; txd_upper |= E1000_TXD_POPTS_TXSM << 8; if (tx_flags & E1000_TX_FLAGS_IPV4) txd_upper |= E1000_TXD_POPTS_IXSM << 8; } if (tx_flags & E1000_TX_FLAGS_CSUM) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; txd_upper |= E1000_TXD_POPTS_TXSM << 8; } if (tx_flags & E1000_TX_FLAGS_VLAN) { txd_lower |= E1000_TXD_CMD_VLE; txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK); } if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) txd_lower &= ~(E1000_TXD_CMD_IFCS); if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; txd_upper |= E1000_TXD_EXTCMD_TSTAMP; } i = tx_ring->next_to_use; do { buffer_info = &tx_ring->buffer_info[i]; tx_desc = E1000_TX_DESC(*tx_ring, i); tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); tx_desc->lower.data = cpu_to_le32(txd_lower | buffer_info->length); tx_desc->upper.data = cpu_to_le32(txd_upper); i++; if (i == tx_ring->count) i = 0; } while (--count > 0); tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */ if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS)); /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); tx_ring->next_to_use = i; } #define MINIMUM_DHCP_PACKET_SIZE 282 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) { struct e1000_hw *hw = &adapter->hw; u16 length, offset; if (skb_vlan_tag_present(skb) && !((skb_vlan_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) return 0; if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) return 0; if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP)) return 0; { const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14); struct udphdr *udp; if (ip->protocol != IPPROTO_UDP) return 0; udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2)); if (ntohs(udp->dest) != 67) return 0; offset = (u8 *)udp + 8 - skb->data; length = skb->len - offset; return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length); } return 0; } static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { struct e1000_adapter *adapter = tx_ring->adapter; netif_stop_queue(adapter->netdev); /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); * but since that doesn't exist yet, just open code it. */ smp_mb(); /* We need to check again in a case another CPU has just * made room available. */ if (e1000_desc_unused(tx_ring) < size) return -EBUSY; /* A reprieve! */ netif_start_queue(adapter->netdev); ++adapter->restart_queue; return 0; } static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { BUG_ON(size > tx_ring->count); if (e1000_desc_unused(tx_ring) >= size) return 0; return __e1000_maybe_stop_tx(tx_ring, size); } static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int first; unsigned int tx_flags = 0; unsigned int len = skb_headlen(skb); unsigned int nr_frags; unsigned int mss; int count = 0; int tso; unsigned int f; __be16 protocol = vlan_get_protocol(skb); if (test_bit(__E1000_DOWN, &adapter->state)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; } if (skb->len <= 0) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; } /* The minimum packet size with TCTL.PSP set is 17 bytes so * pad skb in order to meet this minimum size requirement */ if (skb_put_padto(skb, 17)) return NETDEV_TX_OK; mss = skb_shinfo(skb)->gso_size; if (mss) { u8 hdr_len; /* TSO Workaround for 82571/2/3 Controllers -- if skb->data * points to just header, pull a few bytes of payload from * frags into skb->data */ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); /* we do this workaround for ES2LAN, but it is un-necessary, * avoiding it could save a lot of cycles */ if (skb->data_len && (hdr_len == len)) { unsigned int pull_size; pull_size = min_t(unsigned int, 4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { e_err("__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } len = skb_headlen(skb); } } /* reserve a descriptor for the offload context */ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++; count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); nr_frags = skb_shinfo(skb)->nr_frags; for (f = 0; f < nr_frags; f++) count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]), adapter->tx_fifo_limit); if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ if (e1000_maybe_stop_tx(tx_ring, count + 2)) return NETDEV_TX_BUSY; if (skb_vlan_tag_present(skb)) { tx_flags |= E1000_TX_FLAGS_VLAN; tx_flags |= (skb_vlan_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); } first = tx_ring->next_to_use; tso = e1000_tso(tx_ring, skb, protocol); if (tso < 0) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; } if (tso) tx_flags |= E1000_TX_FLAGS_TSO; else if (e1000_tx_csum(tx_ring, skb, protocol)) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ if (protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4; if (unlikely(skb->no_fcs)) tx_flags |= E1000_TX_FLAGS_NO_FCS; /* if count is 0 then mapping error has occurred */ count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, nr_frags); if (count) { if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && (adapter->flags & FLAG_HAS_HW_TIMESTAMP) && !adapter->tx_hwtstamp_skb) { skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; tx_flags |= E1000_TX_FLAGS_HWTSTAMP; adapter->tx_hwtstamp_skb = skb_get(skb); adapter->tx_hwtstamp_start = jiffies; schedule_work(&adapter->tx_hwtstamp_work); } else { skb_tx_timestamp(skb); } netdev_sent_queue(netdev, skb->len); e1000_tx_queue(tx_ring, tx_flags, count); /* Make sure there is space in the ring for the next send. */ e1000_maybe_stop_tx(tx_ring, (MAX_SKB_FRAGS * DIV_ROUND_UP(PAGE_SIZE, adapter->tx_fifo_limit) + 2)); if (!skb->xmit_more || netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) { if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_tdt_wa(tx_ring, tx_ring->next_to_use); else writel(tx_ring->next_to_use, tx_ring->tail); /* we need this if more than one processor can write * to our tail at a time, it synchronizes IO on *IA64/Altix systems */ mmiowb(); } } else { dev_kfree_skb_any(skb); tx_ring->buffer_info[first].time_stamp = 0; tx_ring->next_to_use = first; } return NETDEV_TX_OK; } /** * e1000_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure **/ static void e1000_tx_timeout(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); /* Do the reset outside of interrupt context */ adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); } static void e1000_reset_task(struct work_struct *work) { struct e1000_adapter *adapter; adapter = container_of(work, struct e1000_adapter, reset_task); /* don't run the task if already down */ if (test_bit(__E1000_DOWN, &adapter->state)) return; if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); } /** * e1000_get_stats64 - Get System Network Statistics * @netdev: network interface device structure * @stats: rtnl_link_stats64 pointer * * Returns the address of the device statistics structure. **/ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, struct rtnl_link_stats64 *stats) { struct e1000_adapter *adapter = netdev_priv(netdev); memset(stats, 0, sizeof(struct rtnl_link_stats64)); spin_lock(&adapter->stats64_lock); e1000e_update_stats(adapter); /* Fill out the OS statistics structure */ stats->rx_bytes = adapter->stats.gorc; stats->rx_packets = adapter->stats.gprc; stats->tx_bytes = adapter->stats.gotc; stats->tx_packets = adapter->stats.gptc; stats->multicast = adapter->stats.mprc; stats->collisions = adapter->stats.colc; /* Rx Errors */ /* RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ stats->rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc; stats->rx_crc_errors = adapter->stats.crcerrs; stats->rx_frame_errors = adapter->stats.algnerrc; stats->rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol; stats->tx_aborted_errors = adapter->stats.ecol; stats->tx_window_errors = adapter->stats.latecol; stats->tx_carrier_errors = adapter->stats.tncrs; /* Tx Dropped needs to be maintained elsewhere */ spin_unlock(&adapter->stats64_lock); return stats; } /** * e1000_change_mtu - Change the Maximum Transfer Unit * @netdev: network interface device structure * @new_mtu: new value for maximum frame size * * Returns 0 on success, negative on failure **/ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { e_err("Jumbo Frames not supported.\n"); return -EINVAL; } /* Supported frame sizes */ if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) || (max_frame > adapter->max_hw_frame_size)) { e_err("Unsupported MTU setting\n"); return -EINVAL; } /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ if ((adapter->hw.mac.type >= e1000_pch2lan) && !(adapter->flags2 & FLAG2_CRC_STRIPPING) && (new_mtu > ETH_DATA_LEN)) { e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n"); return -EINVAL; } while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ adapter->max_frame_size = max_frame; e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; pm_runtime_get_sync(netdev->dev.parent); if (netif_running(netdev)) e1000e_down(adapter, true); /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. * i.e. RXBUFFER_2048 --> size-4096 slab * However with the new *_jumbo_rx* routines, jumbo receives will use * fragmented skbs */ if (max_frame <= 2048) adapter->rx_buffer_len = 2048; else adapter->rx_buffer_len = 4096; /* adjust allocation if LPE protects us, and we aren't using SBP */ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; if (netif_running(netdev)) e1000e_up(adapter); else e1000e_reset(adapter); pm_runtime_put_sync(netdev->dev.parent); clear_bit(__E1000_RESETTING, &adapter->state); return 0; } static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { struct e1000_adapter *adapter = netdev_priv(netdev); struct mii_ioctl_data *data = if_mii(ifr); if (adapter->hw.phy.media_type != e1000_media_type_copper) return -EOPNOTSUPP; switch (cmd) { case SIOCGMIIPHY: data->phy_id = adapter->hw.phy.addr; break; case SIOCGMIIREG: e1000_phy_read_status(adapter); switch (data->reg_num & 0x1F) { case MII_BMCR: data->val_out = adapter->phy_regs.bmcr; break; case MII_BMSR: data->val_out = adapter->phy_regs.bmsr; break; case MII_PHYSID1: data->val_out = (adapter->hw.phy.id >> 16); break; case MII_PHYSID2: data->val_out = (adapter->hw.phy.id & 0xFFFF); break; case MII_ADVERTISE: data->val_out = adapter->phy_regs.advertise; break; case MII_LPA: data->val_out = adapter->phy_regs.lpa; break; case MII_EXPANSION: data->val_out = adapter->phy_regs.expansion; break; case MII_CTRL1000: data->val_out = adapter->phy_regs.ctrl1000; break; case MII_STAT1000: data->val_out = adapter->phy_regs.stat1000; break; case MII_ESTATUS: data->val_out = adapter->phy_regs.estatus; break; default: return -EIO; } break; case SIOCSMIIREG: default: return -EOPNOTSUPP; } return 0; } /** * e1000e_hwtstamp_ioctl - control hardware time stamping * @netdev: network interface device structure * @ifreq: interface request * * Outgoing time stamping can be enabled and disabled. Play nice and * disable it when requested, although it shouldn't cause any overhead * when no packet needs it. At most one packet in the queue may be * marked for time stamping, otherwise it would be impossible to tell * for sure to which packet the hardware time stamp belongs. * * Incoming time stamping has to be configured via the hardware filters. * Not all combinations are supported, in particular event type has to be * specified. Matching the kind of event packet is not supported, with the * exception of "all V2 events regardless of level 2 or 4". **/ static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr) { struct e1000_adapter *adapter = netdev_priv(netdev); struct hwtstamp_config config; int ret_val; if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) return -EFAULT; ret_val = e1000e_config_hwtstamp(adapter, &config); if (ret_val) return ret_val; switch (config.rx_filter) { case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: case HWTSTAMP_FILTER_PTP_V2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: /* With V2 type filters which specify a Sync or Delay Request, * Path Delay Request/Response messages are also time stamped * by hardware so notify the caller the requested packets plus * some others are time stamped. */ config.rx_filter = HWTSTAMP_FILTER_SOME; break; default: break; } return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0; } static int e1000e_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr) { struct e1000_adapter *adapter = netdev_priv(netdev); return copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config, sizeof(adapter->hwtstamp_config)) ? -EFAULT : 0; } static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { case SIOCGMIIPHY: case SIOCGMIIREG: case SIOCSMIIREG: return e1000_mii_ioctl(netdev, ifr, cmd); case SIOCSHWTSTAMP: return e1000e_hwtstamp_set(netdev, ifr); case SIOCGHWTSTAMP: return e1000e_hwtstamp_get(netdev, ifr); default: return -EOPNOTSUPP; } } static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) { struct e1000_hw *hw = &adapter->hw; u32 i, mac_reg, wuc; u16 phy_reg, wuc_enable; int retval; /* copy MAC RARs to PHY RARs */ e1000_copy_rx_addrs_to_phy_ich8lan(hw); retval = hw->phy.ops.acquire(hw); if (retval) { e_err("Could not acquire PHY\n"); return retval; } /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */ retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable); if (retval) goto release; /* copy MAC MTA to PHY MTA - only needed for pchlan */ for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) { mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i); hw->phy.ops.write_reg_page(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF)); hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF)); } /* configure PHY Rx Control register */ hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg); mac_reg = er32(RCTL); if (mac_reg & E1000_RCTL_UPE) phy_reg |= BM_RCTL_UPE; if (mac_reg & E1000_RCTL_MPE) phy_reg |= BM_RCTL_MPE; phy_reg &= ~(BM_RCTL_MO_MASK); if (mac_reg & E1000_RCTL_MO_3) phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT) << BM_RCTL_MO_SHIFT); if (mac_reg & E1000_RCTL_BAM) phy_reg |= BM_RCTL_BAM; if (mac_reg & E1000_RCTL_PMCF) phy_reg |= BM_RCTL_PMCF; mac_reg = er32(CTRL); if (mac_reg & E1000_CTRL_RFCE) phy_reg |= BM_RCTL_RFCE; hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg); wuc = E1000_WUC_PME_EN; if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC)) wuc |= E1000_WUC_APME; /* enable PHY wakeup in MAC register */ ew32(WUFC, wufc); ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME | E1000_WUC_PME_STATUS | wuc)); /* configure and enable PHY wakeup in PHY registers */ hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc); hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc); /* activate PHY wakeup */ wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT; retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable); if (retval) e_err("Could not set PHY Host Wakeup bit\n"); release: hw->phy.ops.release(hw); return retval; } static void e1000e_flush_lpic(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 ret_val; pm_runtime_get_sync(netdev->dev.parent); ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto fl_out; pr_info("EEE TX LPI TIMER: %08X\n", er32(LPIC) >> E1000_LPIC_LPIET_SHIFT); hw->phy.ops.release(hw); fl_out: pm_runtime_put_sync(netdev->dev.parent); } static int e1000e_pm_freeze(struct device *dev) { struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); netif_device_detach(netdev); if (netif_running(netdev)) { int count = E1000_CHECK_RESET_COUNT; while (test_bit(__E1000_RESETTING, &adapter->state) && count--) usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); /* Quiesce the device without resetting the hardware */ e1000e_down(adapter, false); e1000_free_irq(adapter); } e1000e_reset_interrupt_capability(adapter); /* Allow time for pending master requests to run */ e1000e_disable_pcie_master(&adapter->hw); return 0; } static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status; /* Runtime suspend should only enable wakeup for link changes */ u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; int retval = 0; status = er32(STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; if (wufc) { e1000_setup_rctl(adapter); e1000e_set_rx_mode(netdev); /* turn on all-multi mode if wake on multicast is enabled */ if (wufc & E1000_WUFC_MC) { rctl = er32(RCTL); rctl |= E1000_RCTL_MPE; ew32(RCTL, rctl); } ctrl = er32(CTRL); ctrl |= E1000_CTRL_ADVD3WUC; if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)) ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT; ew32(CTRL, ctrl); if (adapter->hw.phy.media_type == e1000_media_type_fiber || adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { /* keep the laser running in D3 */ ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA; ew32(CTRL_EXT, ctrl_ext); } if (!runtime) e1000e_power_up_phy(adapter); if (adapter->flags & FLAG_IS_ICH) e1000_suspend_workarounds_ich8lan(&adapter->hw); if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { /* enable wakeup by the PHY */ retval = e1000_init_phy_wakeup(adapter, wufc); if (retval) return retval; } else { /* enable wakeup by the MAC */ ew32(WUFC, wufc); ew32(WUC, E1000_WUC_PME_EN); } } else { ew32(WUC, 0); ew32(WUFC, 0); e1000_power_down_phy(adapter); } if (adapter->hw.phy.type == e1000_phy_igp_3) { e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); } else if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC))) /* ULP does not support wake from unicast, multicast * or broadcast. */ retval = e1000_enable_ulp_lpt_lp(hw, !runtime); if (retval) return retval; } /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000e_release_hw_control(adapter); pci_clear_master(pdev); /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To * prevent this we need to mask off the correctable errors on the * downstream port of the pci-e switch. * * We don't have the associated upstream bridge while assigning * the PCI device into guest. For example, the KVM on power is * one of the cases. */ if (adapter->flags & FLAG_IS_QUAD_PORT) { struct pci_dev *us_dev = pdev->bus->self; u16 devctl; if (!us_dev) return 0; pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); pci_save_state(pdev); pci_prepare_to_sleep(pdev); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl); } return 0; } /** * e1000e_disable_aspm - Disable ASPM states * @pdev: pointer to PCI device struct * @state: bit-mask of ASPM states to disable * * Some devices *must* have certain ASPM states disabled per hardware errata. **/ static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { struct pci_dev *parent = pdev->bus->self; u16 aspm_dis_mask = 0; u16 pdev_aspmc, parent_aspmc; switch (state) { case PCIE_LINK_STATE_L0S: case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1: aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S; /* fall-through - can't have L1 without L0s */ case PCIE_LINK_STATE_L1: aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1; break; default: return; } pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; if (parent) { pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_aspmc); parent_aspmc &= PCI_EXP_LNKCTL_ASPMC; } /* Nothing to do if the ASPM states to be disabled already are */ if (!(pdev_aspmc & aspm_dis_mask) && (!parent || !(parent_aspmc & aspm_dis_mask))) return; dev_info(&pdev->dev, "Disabling ASPM %s %s\n", (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ? "L0s" : "", (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ? "L1" : ""); #ifdef CONFIG_PCIEASPM pci_disable_link_state_locked(pdev, state); /* Double-check ASPM control. If not disabled by the above, the * BIOS is preventing that from happening (or CONFIG_PCIEASPM is * not enabled); override by writing PCI config space directly. */ pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; if (!(aspm_dis_mask & pdev_aspmc)) return; #endif /* Both device and parent should have the same ASPM setting. * Disable ASPM in downstream component first and then upstream. */ pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask); if (parent) pcie_capability_clear_word(parent, PCI_EXP_LNKCTL, aspm_dis_mask); } #ifdef CONFIG_PM static int __e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u16 aspm_disable_flag = 0; if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) aspm_disable_flag = PCIE_LINK_STATE_L0S; if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) aspm_disable_flag |= PCIE_LINK_STATE_L1; if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); pci_set_master(pdev); if (hw->mac.type >= e1000_pch2lan) e1000_resume_workarounds_pchlan(&adapter->hw); e1000e_power_up_phy(adapter); /* report the system wakeup cause from S3/S4 */ if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { u16 phy_data; e1e_rphy(&adapter->hw, BM_WUS, &phy_data); if (phy_data) { e_info("PHY Wakeup cause - %s\n", phy_data & E1000_WUS_EX ? "Unicast Packet" : phy_data & E1000_WUS_MC ? "Multicast Packet" : phy_data & E1000_WUS_BC ? "Broadcast Packet" : phy_data & E1000_WUS_MAG ? "Magic Packet" : phy_data & E1000_WUS_LNKC ? "Link Status Change" : "other"); } e1e_wphy(&adapter->hw, BM_WUS, ~0); } else { u32 wus = er32(WUS); if (wus) { e_info("MAC Wakeup cause - %s\n", wus & E1000_WUS_EX ? "Unicast Packet" : wus & E1000_WUS_MC ? "Multicast Packet" : wus & E1000_WUS_BC ? "Broadcast Packet" : wus & E1000_WUS_MAG ? "Magic Packet" : wus & E1000_WUS_LNKC ? "Link Status Change" : "other"); } ew32(WUS, ~0); } e1000e_reset(adapter); e1000_init_manageability_pt(adapter); /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_get_hw_control(adapter); return 0; } #ifdef CONFIG_PM_SLEEP static int e1000e_pm_thaw(struct device *dev) { struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); e1000e_set_interrupt_capability(adapter); if (netif_running(netdev)) { u32 err = e1000_request_irq(adapter); if (err) return err; e1000e_up(adapter); } netif_device_attach(netdev); return 0; } static int e1000e_pm_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); e1000e_flush_lpic(pdev); e1000e_pm_freeze(dev); return __e1000_shutdown(pdev, false); } static int e1000e_pm_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); int rc; rc = __e1000_resume(pdev); if (rc) return rc; return e1000e_pm_thaw(dev); } #endif /* CONFIG_PM_SLEEP */ static int e1000e_pm_runtime_idle(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); u16 eee_lp; eee_lp = adapter->hw.dev_spec.ich8lan.eee_lp_ability; if (!e1000e_has_link(adapter)) { adapter->hw.dev_spec.ich8lan.eee_lp_ability = eee_lp; pm_schedule_suspend(dev, 5 * MSEC_PER_SEC); } return -EBUSY; } static int e1000e_pm_runtime_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); int rc; rc = __e1000_resume(pdev); if (rc) return rc; if (netdev->flags & IFF_UP) rc = e1000e_up(adapter); return rc; } static int e1000e_pm_runtime_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); if (netdev->flags & IFF_UP) { int count = E1000_CHECK_RESET_COUNT; while (test_bit(__E1000_RESETTING, &adapter->state) && count--) usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); /* Down the device without resetting the hardware */ e1000e_down(adapter, false); } if (__e1000_shutdown(pdev, true)) { e1000e_pm_runtime_resume(dev); return -EBUSY; } return 0; } #endif /* CONFIG_PM */ static void e1000_shutdown(struct pci_dev *pdev) { e1000e_flush_lpic(pdev); e1000e_pm_freeze(&pdev->dev); __e1000_shutdown(pdev, false); } #ifdef CONFIG_NET_POLL_CONTROLLER static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); if (adapter->msix_entries) { int vector, msix_irq; vector = 0; msix_irq = adapter->msix_entries[vector].vector; disable_irq(msix_irq); e1000_intr_msix_rx(msix_irq, netdev); enable_irq(msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; disable_irq(msix_irq); e1000_intr_msix_tx(msix_irq, netdev); enable_irq(msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; disable_irq(msix_irq); e1000_msix_other(msix_irq, netdev); enable_irq(msix_irq); } return IRQ_HANDLED; } /** * e1000_netpoll * @netdev: network interface device structure * * Polling 'interrupt' - used by things like netconsole to send skbs * without having to re-enable interrupts. It's not called while * the interrupt routine is executing. */ static void e1000_netpoll(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); switch (adapter->int_mode) { case E1000E_INT_MODE_MSIX: e1000_intr_msix(adapter->pdev->irq, netdev); break; case E1000E_INT_MODE_MSI: disable_irq(adapter->pdev->irq); e1000_intr_msi(adapter->pdev->irq, netdev); enable_irq(adapter->pdev->irq); break; default: /* E1000E_INT_MODE_LEGACY */ disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev); enable_irq(adapter->pdev->irq); break; } } #endif /** * e1000_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device * @state: The current pci connection state * * This function is called after a PCI bus error affecting * this device has been detected. */ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); netif_device_detach(netdev); if (state == pci_channel_io_perm_failure) return PCI_ERS_RESULT_DISCONNECT; if (netif_running(netdev)) e1000e_down(adapter, true); pci_disable_device(pdev); /* Request a slot slot reset. */ return PCI_ERS_RESULT_NEED_RESET; } /** * e1000_io_slot_reset - called after the pci bus has been reset. * @pdev: Pointer to PCI device * * Restart the card from scratch, as if from a cold-boot. Implementation * resembles the first-half of the e1000e_pm_resume routine. */ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u16 aspm_disable_flag = 0; int err; pci_ers_result_t result; if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) aspm_disable_flag = PCIE_LINK_STATE_L0S; if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) aspm_disable_flag |= PCIE_LINK_STATE_L1; if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; } else { pdev->state_saved = true; pci_restore_state(pdev); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); e1000e_reset(adapter); ew32(WUS, ~0); result = PCI_ERS_RESULT_RECOVERED; } pci_cleanup_aer_uncorrect_error_status(pdev); return result; } /** * e1000_io_resume - called when traffic can start flowing again. * @pdev: Pointer to PCI device * * This callback is called when the error recovery driver tells us that * its OK to resume normal operation. Implementation resembles the * second-half of the e1000e_pm_resume routine. */ static void e1000_io_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); e1000_init_manageability_pt(adapter); if (netif_running(netdev)) { if (e1000e_up(adapter)) { dev_err(&pdev->dev, "can't bring device back up after reset\n"); return; } } netif_device_attach(netdev); /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_get_hw_control(adapter); } static void e1000_print_device_info(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; u32 ret_val; u8 pba_str[E1000_PBANUM_LENGTH]; /* print bus type/speed/width info */ e_info("(PCI Express:2.5GT/s:%s) %pM\n", /* bus width */ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : "Width x1"), /* MAC address */ netdev->dev_addr); e_info("Intel(R) PRO/%s Network Connection\n", (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); ret_val = e1000_read_pba_string_generic(hw, pba_str, E1000_PBANUM_LENGTH); if (ret_val) strlcpy((char *)pba_str, "Unknown", sizeof(pba_str)); e_info("MAC: %d, PHY: %d, PBA No: %s\n", hw->mac.type, hw->phy.type, pba_str); } static void e1000_eeprom_checks(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; int ret_val; u16 buf = 0; if (hw->mac.type != e1000_82573) return; ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); le16_to_cpus(&buf); if (!ret_val && (!(buf & (1 << 0)))) { /* Deep Smart Power Down (DSPD) */ dev_warn(&adapter->pdev->dev, "Warning: detected DSPD enabled in EEPROM\n"); } } static int e1000_set_features(struct net_device *netdev, netdev_features_t features) { struct e1000_adapter *adapter = netdev_priv(netdev); netdev_features_t changed = features ^ netdev->features; if (changed & (NETIF_F_TSO | NETIF_F_TSO6)) adapter->flags |= FLAG_TSO_FORCE; if (!(changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS | NETIF_F_RXALL))) return 0; if (changed & NETIF_F_RXFCS) { if (features & NETIF_F_RXFCS) { adapter->flags2 &= ~FLAG2_CRC_STRIPPING; } else { /* We need to take it back to defaults, which might mean * stripping is still disabled at the adapter level. */ if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING) adapter->flags2 |= FLAG2_CRC_STRIPPING; else adapter->flags2 &= ~FLAG2_CRC_STRIPPING; } } netdev->features = features; if (netif_running(netdev)) e1000e_reinit_locked(adapter); else e1000e_reset(adapter); return 0; } static const struct net_device_ops e1000e_netdev_ops = { .ndo_open = e1000_open, .ndo_stop = e1000_close, .ndo_start_xmit = e1000_xmit_frame, .ndo_get_stats64 = e1000e_get_stats64, .ndo_set_rx_mode = e1000e_set_rx_mode, .ndo_set_mac_address = e1000_set_mac, .ndo_change_mtu = e1000_change_mtu, .ndo_do_ioctl = e1000_ioctl, .ndo_tx_timeout = e1000_tx_timeout, .ndo_validate_addr = eth_validate_addr, .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = e1000_netpoll, #endif .ndo_set_features = e1000_set_features, }; /** * e1000_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in e1000_pci_tbl * * Returns 0 on success, negative on failure * * e1000_probe initializes an adapter identified by a pci_dev structure. * The OS initialization, configuring of the adapter private structure, * and a hardware reset occur. **/ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev; struct e1000_adapter *adapter; struct e1000_hw *hw; const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; resource_size_t mmio_start, mmio_len; resource_size_t flash_start, flash_len; static int cards_found; u16 aspm_disable_flag = 0; int bars, i, err, pci_using_dac; u16 eeprom_data = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; s32 rval = 0; if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S) aspm_disable_flag = PCIE_LINK_STATE_L0S; if (ei->flags2 & FLAG2_DISABLE_ASPM_L1) aspm_disable_flag |= PCIE_LINK_STATE_L1; if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); err = pci_enable_device_mem(pdev); if (err) return err; pci_using_dac = 0; err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { pci_using_dac = 1; } else { err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } bars = pci_select_bars(pdev, IORESOURCE_MEM); err = pci_request_selected_regions_exclusive(pdev, bars, e1000e_driver_name); if (err) goto err_pci_reg; /* AER (Advanced Error Reporting) hooks */ pci_enable_pcie_error_reporting(pdev); pci_set_master(pdev); /* PCI config space info */ err = pci_save_state(pdev); if (err) goto err_alloc_etherdev; err = -ENOMEM; netdev = alloc_etherdev(sizeof(struct e1000_adapter)); if (!netdev) goto err_alloc_etherdev; SET_NETDEV_DEV(netdev, &pdev->dev); netdev->irq = pdev->irq; pci_set_drvdata(pdev, netdev); adapter = netdev_priv(netdev); hw = &adapter->hw; adapter->netdev = netdev; adapter->pdev = pdev; adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->max_hw_frame_size = ei->max_hw_frame_size; adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); err = -EIO; adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); if (!adapter->hw.hw_addr) goto err_ioremap; if ((adapter->flags & FLAG_HAS_FLASH) && (pci_resource_flags(pdev, 1) & IORESOURCE_MEM) && (hw->mac.type < e1000_pch_spt)) { flash_start = pci_resource_start(pdev, 1); flash_len = pci_resource_len(pdev, 1); adapter->hw.flash_address = ioremap(flash_start, flash_len); if (!adapter->hw.flash_address) goto err_flashmap; } /* Set default EEE advertisement */ if (adapter->flags2 & FLAG2_HAS_EEE) adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; /* construct the net_device struct */ netdev->netdev_ops = &e1000e_netdev_ops; e1000e_set_ethtool_ops(netdev); netdev->watchdog_timeo = 5 * HZ; netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64); strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); netdev->mem_start = mmio_start; netdev->mem_end = mmio_start + mmio_len; adapter->bd_number = cards_found++; e1000e_check_options(adapter); /* setup adapter struct */ err = e1000_sw_init(adapter); if (err) goto err_sw_init; memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops)); memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); err = ei->get_variants(adapter); if (err) goto err_hw_init; if ((adapter->flags & FLAG_IS_ICH) && (adapter->flags & FLAG_READ_ONLY_NVM) && (hw->mac.type < e1000_pch_spt)) e1000e_write_protect_nvm_ich8lan(&adapter->hw); hw->mac.ops.get_bus_info(&adapter->hw); adapter->hw.phy.autoneg_wait_to_complete = 0; /* Copper options */ if (adapter->hw.phy.media_type == e1000_media_type_copper) { adapter->hw.phy.mdix = AUTO_ALL_MODES; adapter->hw.phy.disable_polarity_correction = 0; adapter->hw.phy.ms_type = e1000_ms_hw_default; } if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) dev_info(&pdev->dev, "PHY reset is blocked due to SOL/IDER session.\n"); /* Set initial default active device features */ netdev->features = (NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXHASH | NETIF_F_RXCSUM | NETIF_F_HW_CSUM); /* Set user-changeable features (subset of all device features) */ netdev->hw_features = netdev->features; netdev->hw_features |= NETIF_F_RXFCS; netdev->priv_flags |= IFF_SUPP_NOFCS; netdev->hw_features |= NETIF_F_RXALL; if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; netdev->vlan_features |= (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_HW_CSUM); netdev->priv_flags |= IFF_UNICAST_FLT; if (pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; netdev->vlan_features |= NETIF_F_HIGHDMA; } if (e1000e_enable_mng_pass_thru(&adapter->hw)) adapter->flags |= FLAG_MNG_PT_ENABLED; /* before reading the NVM, reset the controller to * put the device in a known good starting state */ adapter->hw.mac.ops.reset_hw(&adapter->hw); /* systems with ASPM and others may see the checksum fail on the first * attempt. Let's give it a few tries */ for (i = 0;; i++) { if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) break; if (i == 2) { dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } } e1000_eeprom_checks(adapter); /* copy the MAC address */ if (e1000e_read_mac_addr(&adapter->hw)) dev_err(&pdev->dev, "NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", netdev->dev_addr); err = -EIO; goto err_eeprom; } init_timer(&adapter->watchdog_timer); adapter->watchdog_timer.function = e1000_watchdog; adapter->watchdog_timer.data = (unsigned long)adapter; init_timer(&adapter->phy_info_timer); adapter->phy_info_timer.function = e1000_update_phy_info; adapter->phy_info_timer.data = (unsigned long)adapter; INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; adapter->fc_autoneg = true; adapter->hw.fc.requested_mode = e1000_fc_default; adapter->hw.fc.current_mode = e1000_fc_default; adapter->hw.phy.autoneg_advertised = 0x2f; /* Initial Wake on LAN setting - If APM wake is enabled in * the EEPROM, enable the ACPI Magic Packet filter */ if (adapter->flags & FLAG_APME_IN_WUC) { /* APME bit in EEPROM is mapped to WUC.APME */ eeprom_data = er32(WUC); eeprom_apme_mask = E1000_WUC_APME; if ((hw->mac.type > e1000_ich10lan) && (eeprom_data & E1000_WUC_PHY_WAKE)) adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP; } else if (adapter->flags & FLAG_APME_IN_CTRL3) { if (adapter->flags & FLAG_APME_CHECK_PORT_B && (adapter->hw.bus.func == 1)) rval = e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); else rval = e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); } /* fetch WoL from EEPROM */ if (rval) e_dbg("NVM read error getting WoL initial values: %d\n", rval); else if (eeprom_data & eeprom_apme_mask) adapter->eeprom_wol |= E1000_WUFC_MAG; /* now that we have the eeprom settings, apply the special cases * where the eeprom may be wrong or the board simply won't support * wake on lan on a particular port */ if (!(adapter->flags & FLAG_HAS_WOL)) adapter->eeprom_wol = 0; /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; /* make sure adapter isn't asleep if manageability is enabled */ if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) || (hw->mac.ops.check_mng_mode(hw))) device_wakeup_enable(&pdev->dev); /* save off EEPROM version number */ rval = e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); if (rval) { e_dbg("NVM read error getting EEPROM version: %d\n", rval); adapter->eeprom_vers = 0; } /* reset the hardware with the new settings */ e1000e_reset(adapter); /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_get_hw_control(adapter); strlcpy(netdev->name, "eth%d", sizeof(netdev->name)); err = register_netdev(netdev); if (err) goto err_register; /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); /* init PTP hardware clock */ e1000e_ptp_init(adapter); e1000_print_device_info(adapter); if (pci_dev_run_wake(pdev)) pm_runtime_put_noidle(&pdev->dev); return 0; err_register: if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_release_hw_control(adapter); err_eeprom: if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw)) e1000_phy_hw_reset(&adapter->hw); err_hw_init: kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_sw_init: if ((adapter->hw.flash_address) && (hw->mac.type < e1000_pch_spt)) iounmap(adapter->hw.flash_address); e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); err_pci_reg: err_dma: pci_disable_device(pdev); return err; } /** * e1000_remove - Device Removal Routine * @pdev: PCI device information struct * * e1000_remove is called by the PCI subsystem to alert the driver * that it should release a PCI device. The could be caused by a * Hot-Plug event, or because the driver is going to be removed from * memory. **/ static void e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); bool down = test_bit(__E1000_DOWN, &adapter->state); e1000e_ptp_remove(adapter); /* The timers may be rescheduled, so explicitly disable them * from being rescheduled. */ if (!down) set_bit(__E1000_DOWN, &adapter->state); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); cancel_work_sync(&adapter->reset_task); cancel_work_sync(&adapter->watchdog_task); cancel_work_sync(&adapter->downshift_task); cancel_work_sync(&adapter->update_phy_task); cancel_work_sync(&adapter->print_hang_task); if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { cancel_work_sync(&adapter->tx_hwtstamp_work); if (adapter->tx_hwtstamp_skb) { dev_kfree_skb_any(adapter->tx_hwtstamp_skb); adapter->tx_hwtstamp_skb = NULL; } } /* Don't lie to e1000_close() down the road. */ if (!down) clear_bit(__E1000_DOWN, &adapter->state); unregister_netdev(netdev); if (pci_dev_run_wake(pdev)) pm_runtime_get_noresume(&pdev->dev); /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000e_release_hw_control(adapter); e1000e_reset_interrupt_capability(adapter); kfree(adapter->tx_ring); kfree(adapter->rx_ring); iounmap(adapter->hw.hw_addr); if ((adapter->hw.flash_address) && (adapter->hw.mac.type < e1000_pch_spt)) iounmap(adapter->hw.flash_address); pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); free_netdev(netdev); /* AER disable */ pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); } /* PCI Error Recovery (ERS) */ static const struct pci_error_handlers e1000_err_handler = { .error_detected = e1000_io_error_detected, .slot_reset = e1000_io_slot_reset, .resume = e1000_io_resume, }; static const struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), board_80003es2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT), board_80003es2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT), board_80003es2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT), board_80003es2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM), board_pch_spt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V), board_pch_spt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM2), board_pch_spt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V2), board_pch_spt }, { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); static const struct dev_pm_ops e1000_pm_ops = { #ifdef CONFIG_PM_SLEEP .suspend = e1000e_pm_suspend, .resume = e1000e_pm_resume, .freeze = e1000e_pm_freeze, .thaw = e1000e_pm_thaw, .poweroff = e1000e_pm_suspend, .restore = e1000e_pm_resume, #endif SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume, e1000e_pm_runtime_idle) }; /* PCI Device API Driver */ static struct pci_driver e1000_driver = { .name = e1000e_driver_name, .id_table = e1000_pci_tbl, .probe = e1000_probe, .remove = e1000_remove, .driver = { .pm = &e1000_pm_ops, }, .shutdown = e1000_shutdown, .err_handler = &e1000_err_handler }; /** * e1000_init_module - Driver Registration Routine * * e1000_init_module is the first routine called when the driver is * loaded. All it does is register with the PCI subsystem. **/ static int __init e1000_init_module(void) { int ret; pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; } module_init(e1000_init_module); /** * e1000_exit_module - Driver Exit Cleanup Routine * * e1000_exit_module is called just before the driver is removed * from memory. **/ static void __exit e1000_exit_module(void) { pci_unregister_driver(&e1000_driver); } module_exit(e1000_exit_module); MODULE_AUTHOR("Intel Corporation, "); MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); /* netdev.c */