/* * USB Network driver infrastructure * Copyright (C) 2000-2005 by David Brownell * Copyright (C) 2003-2005 David Hollis * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* * This is a generic "USB networking" framework that works with several * kinds of full and high speed networking devices: host-to-host cables, * smart usb peripherals, and actual Ethernet adapters. * * These devices usually differ in terms of control protocols (if they * even have one!) and sometimes they define new framing to wrap or batch * Ethernet packets. Otherwise, they talk to USB pretty much the same, * so interface (un)binding, endpoint I/O queues, fault handling, and other * issues can usefully be addressed by this framework. */ // #define DEBUG // error path messages, extra info // #define VERBOSE // more; success messages #include #include #include #include #include #include #include #include #include #include #define DRIVER_VERSION "22-Aug-2005" /*-------------------------------------------------------------------------*/ /* * Nineteen USB 1.1 max size bulk transactions per frame (ms), max. * Several dozen bytes of IPv4 data can fit in two such transactions. * One maximum size Ethernet packet takes twenty four of them. * For high speed, each frame comfortably fits almost 36 max size * Ethernet packets (so queues should be bigger). * * REVISIT qlens should be members of 'struct usbnet'; the goal is to * let the USB host controller be busy for 5msec or more before an irq * is required, under load. Jumbograms change the equation. */ #define RX_MAX_QUEUE_MEMORY (60 * 1518) #define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \ (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4) #define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \ (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4) // reawaken network queue this soon after stopping; else watchdog barks #define TX_TIMEOUT_JIFFIES (5*HZ) // throttle rx/tx briefly after some faults, so khubd might disconnect() // us (it polls at HZ/4 usually) before we report too many false errors. #define THROTTLE_JIFFIES (HZ/8) // between wakeups #define UNLINK_TIMEOUT_MS 3 /*-------------------------------------------------------------------------*/ // randomly generated ethernet address static u8 node_id [ETH_ALEN]; static const char driver_name [] = "usbnet"; /* use ethtool to change the level for any given device */ static int msg_level = -1; module_param (msg_level, int, 0); MODULE_PARM_DESC (msg_level, "Override default message level"); /*-------------------------------------------------------------------------*/ /* handles CDC Ethernet and many other network "bulk data" interfaces */ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) { int tmp; struct usb_host_interface *alt = NULL; struct usb_host_endpoint *in = NULL, *out = NULL; struct usb_host_endpoint *status = NULL; for (tmp = 0; tmp < intf->num_altsetting; tmp++) { unsigned ep; in = out = status = NULL; alt = intf->altsetting + tmp; /* take the first altsetting with in-bulk + out-bulk; * remember any status endpoint, just in case; * ignore other endpoints and altsetttings. */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; int intr = 0; e = alt->endpoint + ep; switch (e->desc.bmAttributes) { case USB_ENDPOINT_XFER_INT: if (!usb_endpoint_dir_in(&e->desc)) continue; intr = 1; /* FALLTHROUGH */ case USB_ENDPOINT_XFER_BULK: break; default: continue; } if (usb_endpoint_dir_in(&e->desc)) { if (!intr && !in) in = e; else if (intr && !status) status = e; } else { if (!out) out = e; } } if (in && out) break; } if (!alt || !in || !out) return -EINVAL; if (alt->desc.bAlternateSetting != 0 || !(dev->driver_info->flags & FLAG_NO_SETINT)) { tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber, alt->desc.bAlternateSetting); if (tmp < 0) return tmp; } dev->in = usb_rcvbulkpipe (dev->udev, in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); dev->out = usb_sndbulkpipe (dev->udev, out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); dev->status = status; return 0; } EXPORT_SYMBOL_GPL(usbnet_get_endpoints); static u8 nibble(unsigned char c) { if (likely(isdigit(c))) return c - '0'; c = toupper(c); if (likely(isxdigit(c))) return 10 + c - 'A'; return 0; } int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress) { int tmp, i; unsigned char buf [13]; tmp = usb_string(dev->udev, iMACAddress, buf, sizeof buf); if (tmp != 12) { dev_dbg(&dev->udev->dev, "bad MAC string %d fetch, %d\n", iMACAddress, tmp); if (tmp >= 0) tmp = -EINVAL; return tmp; } for (i = tmp = 0; i < 6; i++, tmp += 2) dev->net->dev_addr [i] = (nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]); return 0; } EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr); static void intr_complete (struct urb *urb); static int init_status (struct usbnet *dev, struct usb_interface *intf) { char *buf = NULL; unsigned pipe = 0; unsigned maxp; unsigned period; if (!dev->driver_info->status) return 0; pipe = usb_rcvintpipe (dev->udev, dev->status->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); maxp = usb_maxpacket (dev->udev, pipe, 0); /* avoid 1 msec chatter: min 8 msec poll rate */ period = max ((int) dev->status->desc.bInterval, (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3); buf = kmalloc (maxp, GFP_KERNEL); if (buf) { dev->interrupt = usb_alloc_urb (0, GFP_KERNEL); if (!dev->interrupt) { kfree (buf); return -ENOMEM; } else { usb_fill_int_urb(dev->interrupt, dev->udev, pipe, buf, maxp, intr_complete, dev, period); dev_dbg(&intf->dev, "status ep%din, %d bytes period %d\n", usb_pipeendpoint(pipe), maxp, period); } } return 0; } /* Passes this packet up the stack, updating its accounting. * Some link protocols batch packets, so their rx_fixup paths * can return clones as well as just modify the original skb. */ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb) { int status; if (test_bit(EVENT_RX_PAUSED, &dev->flags)) { skb_queue_tail(&dev->rxq_pause, skb); return; } skb->protocol = eth_type_trans (skb, dev->net); dev->net->stats.rx_packets++; dev->net->stats.rx_bytes += skb->len; netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n", skb->len + sizeof (struct ethhdr), skb->protocol); memset (skb->cb, 0, sizeof (struct skb_data)); status = netif_rx (skb); if (status != NET_RX_SUCCESS) netif_dbg(dev, rx_err, dev->net, "netif_rx status %d\n", status); } EXPORT_SYMBOL_GPL(usbnet_skb_return); /*------------------------------------------------------------------------- * * Network Device Driver (peer link to "Host Device", from USB host) * *-------------------------------------------------------------------------*/ int usbnet_change_mtu (struct net_device *net, int new_mtu) { struct usbnet *dev = netdev_priv(net); int ll_mtu = new_mtu + net->hard_header_len; int old_hard_mtu = dev->hard_mtu; int old_rx_urb_size = dev->rx_urb_size; if (new_mtu <= 0) return -EINVAL; // no second zero-length packet read wanted after mtu-sized packets if ((ll_mtu % dev->maxpacket) == 0) return -EDOM; net->mtu = new_mtu; dev->hard_mtu = net->mtu + net->hard_header_len; if (dev->rx_urb_size == old_hard_mtu) { dev->rx_urb_size = dev->hard_mtu; if (dev->rx_urb_size > old_rx_urb_size) usbnet_unlink_rx_urbs(dev); } return 0; } EXPORT_SYMBOL_GPL(usbnet_change_mtu); /*-------------------------------------------------------------------------*/ /* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from * completion callbacks. 2.5 should have fixed those bugs... */ static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_head *list) { unsigned long flags; spin_lock_irqsave(&list->lock, flags); __skb_unlink(skb, list); spin_unlock(&list->lock); spin_lock(&dev->done.lock); __skb_queue_tail(&dev->done, skb); if (dev->done.qlen == 1) tasklet_schedule(&dev->bh); spin_unlock_irqrestore(&dev->done.lock, flags); } /* some work can't be done in tasklets, so we use keventd * * NOTE: annoying asymmetry: if it's active, schedule_work() fails, * but tasklet_schedule() doesn't. hope the failure is rare. */ void usbnet_defer_kevent (struct usbnet *dev, int work) { set_bit (work, &dev->flags); if (!schedule_work (&dev->kevent)) netdev_err(dev->net, "kevent %d may have been dropped\n", work); else netdev_dbg(dev->net, "kevent %d scheduled\n", work); } EXPORT_SYMBOL_GPL(usbnet_defer_kevent); /*-------------------------------------------------------------------------*/ static void rx_complete (struct urb *urb); static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) { struct sk_buff *skb; struct skb_data *entry; int retval = 0; unsigned long lockflags; size_t size = dev->rx_urb_size; if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) { netif_dbg(dev, rx_err, dev->net, "no rx skb\n"); usbnet_defer_kevent (dev, EVENT_RX_MEMORY); usb_free_urb (urb); return; } skb_reserve (skb, NET_IP_ALIGN); entry = (struct skb_data *) skb->cb; entry->urb = urb; entry->dev = dev; entry->state = rx_start; entry->length = 0; usb_fill_bulk_urb (urb, dev->udev, dev->in, skb->data, size, rx_complete, skb); spin_lock_irqsave (&dev->rxq.lock, lockflags); if (netif_running (dev->net) && netif_device_present (dev->net) && !test_bit (EVENT_RX_HALT, &dev->flags) && !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) { switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) { case -EPIPE: usbnet_defer_kevent (dev, EVENT_RX_HALT); break; case -ENOMEM: usbnet_defer_kevent (dev, EVENT_RX_MEMORY); break; case -ENODEV: netif_dbg(dev, ifdown, dev->net, "device gone\n"); netif_device_detach (dev->net); break; default: netif_dbg(dev, rx_err, dev->net, "rx submit, %d\n", retval); tasklet_schedule (&dev->bh); break; case 0: __skb_queue_tail (&dev->rxq, skb); } } else { netif_dbg(dev, ifdown, dev->net, "rx: stopped\n"); retval = -ENOLINK; } spin_unlock_irqrestore (&dev->rxq.lock, lockflags); if (retval) { dev_kfree_skb_any (skb); usb_free_urb (urb); } } /*-------------------------------------------------------------------------*/ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) { if (dev->driver_info->rx_fixup && !dev->driver_info->rx_fixup (dev, skb)) goto error; // else network stack removes extra byte if we forced a short packet if (skb->len) usbnet_skb_return (dev, skb); else { netif_dbg(dev, rx_err, dev->net, "drop\n"); error: dev->net->stats.rx_errors++; skb_queue_tail (&dev->done, skb); } } /*-------------------------------------------------------------------------*/ static void rx_complete (struct urb *urb) { struct sk_buff *skb = (struct sk_buff *) urb->context; struct skb_data *entry = (struct skb_data *) skb->cb; struct usbnet *dev = entry->dev; int urb_status = urb->status; skb_put (skb, urb->actual_length); entry->state = rx_done; entry->urb = NULL; switch (urb_status) { /* success */ case 0: if (skb->len < dev->net->hard_header_len) { entry->state = rx_cleanup; dev->net->stats.rx_errors++; dev->net->stats.rx_length_errors++; netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len); } break; /* stalls need manual reset. this is rare ... except that * when going through USB 2.0 TTs, unplug appears this way. * we avoid the highspeed version of the ETIMEDOUT/EILSEQ * storm, recovering as needed. */ case -EPIPE: dev->net->stats.rx_errors++; usbnet_defer_kevent (dev, EVENT_RX_HALT); // FALLTHROUGH /* software-driven interface shutdown */ case -ECONNRESET: /* async unlink */ case -ESHUTDOWN: /* hardware gone */ netif_dbg(dev, ifdown, dev->net, "rx shutdown, code %d\n", urb_status); goto block; /* we get controller i/o faults during khubd disconnect() delays. * throttle down resubmits, to avoid log floods; just temporarily, * so we still recover when the fault isn't a khubd delay. */ case -EPROTO: case -ETIME: case -EILSEQ: dev->net->stats.rx_errors++; if (!timer_pending (&dev->delay)) { mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES); netif_dbg(dev, link, dev->net, "rx throttle %d\n", urb_status); } block: entry->state = rx_cleanup; entry->urb = urb; urb = NULL; break; /* data overrun ... flush fifo? */ case -EOVERFLOW: dev->net->stats.rx_over_errors++; // FALLTHROUGH default: entry->state = rx_cleanup; dev->net->stats.rx_errors++; netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status); break; } defer_bh(dev, skb, &dev->rxq); if (urb) { if (netif_running (dev->net) && !test_bit (EVENT_RX_HALT, &dev->flags)) { rx_submit (dev, urb, GFP_ATOMIC); return; } usb_free_urb (urb); } netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n"); } static void intr_complete (struct urb *urb) { struct usbnet *dev = urb->context; int status = urb->status; switch (status) { /* success */ case 0: dev->driver_info->status(dev, urb); break; /* software-driven interface shutdown */ case -ENOENT: /* urb killed */ case -ESHUTDOWN: /* hardware gone */ netif_dbg(dev, ifdown, dev->net, "intr shutdown, code %d\n", status); return; /* NOTE: not throttling like RX/TX, since this endpoint * already polls infrequently */ default: netdev_dbg(dev->net, "intr status %d\n", status); break; } if (!netif_running (dev->net)) return; memset(urb->transfer_buffer, 0, urb->transfer_buffer_length); status = usb_submit_urb (urb, GFP_ATOMIC); if (status != 0) netif_err(dev, timer, dev->net, "intr resubmit --> %d\n", status); } /*-------------------------------------------------------------------------*/ void usbnet_pause_rx(struct usbnet *dev) { set_bit(EVENT_RX_PAUSED, &dev->flags); netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n"); } EXPORT_SYMBOL_GPL(usbnet_pause_rx); void usbnet_resume_rx(struct usbnet *dev) { struct sk_buff *skb; int num = 0; clear_bit(EVENT_RX_PAUSED, &dev->flags); while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) { usbnet_skb_return(dev, skb); num++; } tasklet_schedule(&dev->bh); netif_dbg(dev, rx_status, dev->net, "paused rx queue disabled, %d skbs requeued\n", num); } EXPORT_SYMBOL_GPL(usbnet_resume_rx); void usbnet_purge_paused_rxq(struct usbnet *dev) { skb_queue_purge(&dev->rxq_pause); } EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq); /*-------------------------------------------------------------------------*/ // unlink pending rx/tx; completion handlers do all other cleanup static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) { unsigned long flags; struct sk_buff *skb, *skbnext; int count = 0; spin_lock_irqsave (&q->lock, flags); skb_queue_walk_safe(q, skb, skbnext) { struct skb_data *entry; struct urb *urb; int retval; entry = (struct skb_data *) skb->cb; urb = entry->urb; // during some PM-driven resume scenarios, // these (async) unlinks complete immediately retval = usb_unlink_urb (urb); if (retval != -EINPROGRESS && retval != 0) netdev_dbg(dev->net, "unlink urb err, %d\n", retval); else count++; } spin_unlock_irqrestore (&q->lock, flags); return count; } // Flush all pending rx urbs // minidrivers may need to do this when the MTU changes void usbnet_unlink_rx_urbs(struct usbnet *dev) { if (netif_running(dev->net)) { (void) unlink_urbs (dev, &dev->rxq); tasklet_schedule(&dev->bh); } } EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs); /*-------------------------------------------------------------------------*/ // precondition: never called in_interrupt static void usbnet_terminate_urbs(struct usbnet *dev) { DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup); DECLARE_WAITQUEUE(wait, current); int temp; /* ensure there are no more active urbs */ add_wait_queue(&unlink_wakeup, &wait); set_current_state(TASK_UNINTERRUPTIBLE); dev->wait = &unlink_wakeup; temp = unlink_urbs(dev, &dev->txq) + unlink_urbs(dev, &dev->rxq); /* maybe wait for deletions to finish. */ while (!skb_queue_empty(&dev->rxq) && !skb_queue_empty(&dev->txq) && !skb_queue_empty(&dev->done)) { schedule_timeout(UNLINK_TIMEOUT_MS); set_current_state(TASK_UNINTERRUPTIBLE); netif_dbg(dev, ifdown, dev->net, "waited for %d urb completions\n", temp); } set_current_state(TASK_RUNNING); dev->wait = NULL; remove_wait_queue(&unlink_wakeup, &wait); } int usbnet_stop (struct net_device *net) { struct usbnet *dev = netdev_priv(net); struct driver_info *info = dev->driver_info; int retval; netif_stop_queue (net); netif_info(dev, ifdown, dev->net, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", net->stats.rx_packets, net->stats.tx_packets, net->stats.rx_errors, net->stats.tx_errors); /* allow minidriver to stop correctly (wireless devices to turn off * radio etc) */ if (info->stop) { retval = info->stop(dev); if (retval < 0) netif_info(dev, ifdown, dev->net, "stop fail (%d) usbnet usb-%s-%s, %s\n", retval, dev->udev->bus->bus_name, dev->udev->devpath, info->description); } if (!(info->flags & FLAG_AVOID_UNLINK_URBS)) usbnet_terminate_urbs(dev); usb_kill_urb(dev->interrupt); usbnet_purge_paused_rxq(dev); /* deferred work (task, timer, softirq) must also stop. * can't flush_scheduled_work() until we drop rtnl (later), * else workers could deadlock; so make workers a NOP. */ dev->flags = 0; del_timer_sync (&dev->delay); tasklet_kill (&dev->bh); if (info->manage_power) info->manage_power(dev, 0); else usb_autopm_put_interface(dev->intf); return 0; } EXPORT_SYMBOL_GPL(usbnet_stop); /*-------------------------------------------------------------------------*/ // posts reads, and enables write queuing // precondition: never called in_interrupt int usbnet_open (struct net_device *net) { struct usbnet *dev = netdev_priv(net); int retval; struct driver_info *info = dev->driver_info; if ((retval = usb_autopm_get_interface(dev->intf)) < 0) { netif_info(dev, ifup, dev->net, "resumption fail (%d) usbnet usb-%s-%s, %s\n", retval, dev->udev->bus->bus_name, dev->udev->devpath, info->description); goto done_nopm; } // put into "known safe" state if (info->reset && (retval = info->reset (dev)) < 0) { netif_info(dev, ifup, dev->net, "open reset fail (%d) usbnet usb-%s-%s, %s\n", retval, dev->udev->bus->bus_name, dev->udev->devpath, info->description); goto done; } // insist peer be connected if (info->check_connect && (retval = info->check_connect (dev)) < 0) { netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval); goto done; } /* start any status interrupt transfer */ if (dev->interrupt) { retval = usb_submit_urb (dev->interrupt, GFP_KERNEL); if (retval < 0) { netif_err(dev, ifup, dev->net, "intr submit %d\n", retval); goto done; } } netif_start_queue (net); netif_info(dev, ifup, dev->net, "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n", (int)RX_QLEN(dev), (int)TX_QLEN(dev), dev->net->mtu, (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" : (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" : (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" : (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" : (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" : "simple"); // delay posting reads until we're fully open tasklet_schedule (&dev->bh); if (info->manage_power) { retval = info->manage_power(dev, 1); if (retval < 0) goto done; usb_autopm_put_interface(dev->intf); } return retval; done: usb_autopm_put_interface(dev->intf); done_nopm: return retval; } EXPORT_SYMBOL_GPL(usbnet_open); /*-------------------------------------------------------------------------*/ /* ethtool methods; minidrivers may need to add some more, but * they'll probably want to use this base set. */ int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd) { struct usbnet *dev = netdev_priv(net); if (!dev->mii.mdio_read) return -EOPNOTSUPP; return mii_ethtool_gset(&dev->mii, cmd); } EXPORT_SYMBOL_GPL(usbnet_get_settings); int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd) { struct usbnet *dev = netdev_priv(net); int retval; if (!dev->mii.mdio_write) return -EOPNOTSUPP; retval = mii_ethtool_sset(&dev->mii, cmd); /* link speed/duplex might have changed */ if (dev->driver_info->link_reset) dev->driver_info->link_reset(dev); return retval; } EXPORT_SYMBOL_GPL(usbnet_set_settings); u32 usbnet_get_link (struct net_device *net) { struct usbnet *dev = netdev_priv(net); /* If a check_connect is defined, return its result */ if (dev->driver_info->check_connect) return dev->driver_info->check_connect (dev) == 0; /* if the device has mii operations, use those */ if (dev->mii.mdio_read) return mii_link_ok(&dev->mii); /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */ return ethtool_op_get_link(net); } EXPORT_SYMBOL_GPL(usbnet_get_link); int usbnet_nway_reset(struct net_device *net) { struct usbnet *dev = netdev_priv(net); if (!dev->mii.mdio_write) return -EOPNOTSUPP; return mii_nway_restart(&dev->mii); } EXPORT_SYMBOL_GPL(usbnet_nway_reset); void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); strncpy (info->driver, dev->driver_name, sizeof info->driver); strncpy (info->version, DRIVER_VERSION, sizeof info->version); strncpy (info->fw_version, dev->driver_info->description, sizeof info->fw_version); usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); } EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); u32 usbnet_get_msglevel (struct net_device *net) { struct usbnet *dev = netdev_priv(net); return dev->msg_enable; } EXPORT_SYMBOL_GPL(usbnet_get_msglevel); void usbnet_set_msglevel (struct net_device *net, u32 level) { struct usbnet *dev = netdev_priv(net); dev->msg_enable = level; } EXPORT_SYMBOL_GPL(usbnet_set_msglevel); /* drivers may override default ethtool_ops in their bind() routine */ static const struct ethtool_ops usbnet_ethtool_ops = { .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .get_link = usbnet_get_link, .nway_reset = usbnet_nway_reset, .get_drvinfo = usbnet_get_drvinfo, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, }; /*-------------------------------------------------------------------------*/ /* work that cannot be done in interrupt context uses keventd. * * NOTE: with 2.5 we could do more of this using completion callbacks, * especially now that control transfers can be queued. */ static void kevent (struct work_struct *work) { struct usbnet *dev = container_of(work, struct usbnet, kevent); int status; /* usb_clear_halt() needs a thread context */ if (test_bit (EVENT_TX_HALT, &dev->flags)) { unlink_urbs (dev, &dev->txq); status = usb_autopm_get_interface(dev->intf); if (status < 0) goto fail_pipe; status = usb_clear_halt (dev->udev, dev->out); usb_autopm_put_interface(dev->intf); if (status < 0 && status != -EPIPE && status != -ESHUTDOWN) { if (netif_msg_tx_err (dev)) fail_pipe: netdev_err(dev->net, "can't clear tx halt, status %d\n", status); } else { clear_bit (EVENT_TX_HALT, &dev->flags); if (status != -ESHUTDOWN) netif_wake_queue (dev->net); } } if (test_bit (EVENT_RX_HALT, &dev->flags)) { unlink_urbs (dev, &dev->rxq); status = usb_autopm_get_interface(dev->intf); if (status < 0) goto fail_halt; status = usb_clear_halt (dev->udev, dev->in); usb_autopm_put_interface(dev->intf); if (status < 0 && status != -EPIPE && status != -ESHUTDOWN) { if (netif_msg_rx_err (dev)) fail_halt: netdev_err(dev->net, "can't clear rx halt, status %d\n", status); } else { clear_bit (EVENT_RX_HALT, &dev->flags); tasklet_schedule (&dev->bh); } } /* tasklet could resubmit itself forever if memory is tight */ if (test_bit (EVENT_RX_MEMORY, &dev->flags)) { struct urb *urb = NULL; if (netif_running (dev->net)) urb = usb_alloc_urb (0, GFP_KERNEL); else clear_bit (EVENT_RX_MEMORY, &dev->flags); if (urb != NULL) { clear_bit (EVENT_RX_MEMORY, &dev->flags); status = usb_autopm_get_interface(dev->intf); if (status < 0) goto fail_lowmem; rx_submit (dev, urb, GFP_KERNEL); usb_autopm_put_interface(dev->intf); fail_lowmem: tasklet_schedule (&dev->bh); } } if (test_bit (EVENT_LINK_RESET, &dev->flags)) { struct driver_info *info = dev->driver_info; int retval = 0; clear_bit (EVENT_LINK_RESET, &dev->flags); status = usb_autopm_get_interface(dev->intf); if (status < 0) goto skip_reset; if(info->link_reset && (retval = info->link_reset(dev)) < 0) { usb_autopm_put_interface(dev->intf); skip_reset: netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n", retval, dev->udev->bus->bus_name, dev->udev->devpath, info->description); } else { usb_autopm_put_interface(dev->intf); } } if (dev->flags) netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags); } /*-------------------------------------------------------------------------*/ static void tx_complete (struct urb *urb) { struct sk_buff *skb = (struct sk_buff *) urb->context; struct skb_data *entry = (struct skb_data *) skb->cb; struct usbnet *dev = entry->dev; if (urb->status == 0) { dev->net->stats.tx_packets++; dev->net->stats.tx_bytes += entry->length; } else { dev->net->stats.tx_errors++; switch (urb->status) { case -EPIPE: usbnet_defer_kevent (dev, EVENT_TX_HALT); break; /* software-driven interface shutdown */ case -ECONNRESET: // async unlink case -ESHUTDOWN: // hardware gone break; // like rx, tx gets controller i/o faults during khubd delays // and so it uses the same throttling mechanism. case -EPROTO: case -ETIME: case -EILSEQ: usb_mark_last_busy(dev->udev); if (!timer_pending (&dev->delay)) { mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES); netif_dbg(dev, link, dev->net, "tx throttle %d\n", urb->status); } netif_stop_queue (dev->net); break; default: netif_dbg(dev, tx_err, dev->net, "tx err %d\n", entry->urb->status); break; } } usb_autopm_put_interface_async(dev->intf); urb->dev = NULL; entry->state = tx_done; defer_bh(dev, skb, &dev->txq); } /*-------------------------------------------------------------------------*/ void usbnet_tx_timeout (struct net_device *net) { struct usbnet *dev = netdev_priv(net); unlink_urbs (dev, &dev->txq); tasklet_schedule (&dev->bh); // FIXME: device recovery -- reset? } EXPORT_SYMBOL_GPL(usbnet_tx_timeout); /*-------------------------------------------------------------------------*/ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) { struct usbnet *dev = netdev_priv(net); int length; struct urb *urb = NULL; struct skb_data *entry; struct driver_info *info = dev->driver_info; unsigned long flags; int retval; // some devices want funky USB-level framing, for // win32 driver (usually) and/or hardware quirks if (info->tx_fixup) { skb = info->tx_fixup (dev, skb, GFP_ATOMIC); if (!skb) { netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n"); goto drop; } } length = skb->len; if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) { netif_dbg(dev, tx_err, dev->net, "no urb\n"); goto drop; } entry = (struct skb_data *) skb->cb; entry->urb = urb; entry->dev = dev; entry->state = tx_start; entry->length = length; usb_fill_bulk_urb (urb, dev->udev, dev->out, skb->data, skb->len, tx_complete, skb); /* don't assume the hardware handles USB_ZERO_PACKET * NOTE: strictly conforming cdc-ether devices should expect * the ZLP here, but ignore the one-byte packet. */ if (length % dev->maxpacket == 0) { if (!(info->flags & FLAG_SEND_ZLP)) { urb->transfer_buffer_length++; if (skb_tailroom(skb)) { skb->data[skb->len] = 0; __skb_put(skb, 1); } } else urb->transfer_flags |= URB_ZERO_PACKET; } spin_lock_irqsave(&dev->txq.lock, flags); retval = usb_autopm_get_interface_async(dev->intf); if (retval < 0) { spin_unlock_irqrestore(&dev->txq.lock, flags); goto drop; } #ifdef CONFIG_PM /* if this triggers the device is still a sleep */ if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) { /* transmission will be done in resume */ usb_anchor_urb(urb, &dev->deferred); /* no use to process more packets */ netif_stop_queue(net); spin_unlock_irqrestore(&dev->txq.lock, flags); netdev_dbg(dev->net, "Delaying transmission for resumption\n"); goto deferred; } #endif switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) { case -EPIPE: netif_stop_queue (net); usbnet_defer_kevent (dev, EVENT_TX_HALT); usb_autopm_put_interface_async(dev->intf); break; default: usb_autopm_put_interface_async(dev->intf); netif_dbg(dev, tx_err, dev->net, "tx: submit urb err %d\n", retval); break; case 0: net->trans_start = jiffies; __skb_queue_tail (&dev->txq, skb); if (dev->txq.qlen >= TX_QLEN (dev)) netif_stop_queue (net); } spin_unlock_irqrestore (&dev->txq.lock, flags); if (retval) { netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval); drop: dev->net->stats.tx_dropped++; if (skb) dev_kfree_skb_any (skb); usb_free_urb (urb); } else netif_dbg(dev, tx_queued, dev->net, "> tx, len %d, type 0x%x\n", length, skb->protocol); #ifdef CONFIG_PM deferred: #endif return NETDEV_TX_OK; } EXPORT_SYMBOL_GPL(usbnet_start_xmit); /*-------------------------------------------------------------------------*/ // tasklet (work deferred from completions, in_irq) or timer static void usbnet_bh (unsigned long param) { struct usbnet *dev = (struct usbnet *) param; struct sk_buff *skb; struct skb_data *entry; while ((skb = skb_dequeue (&dev->done))) { entry = (struct skb_data *) skb->cb; switch (entry->state) { case rx_done: entry->state = rx_cleanup; rx_process (dev, skb); continue; case tx_done: case rx_cleanup: usb_free_urb (entry->urb); dev_kfree_skb (skb); continue; default: netdev_dbg(dev->net, "bogus skb state %d\n", entry->state); } } // waiting for all pending urbs to complete? if (dev->wait) { if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) { wake_up (dev->wait); } // or are we maybe short a few urbs? } else if (netif_running (dev->net) && netif_device_present (dev->net) && !timer_pending (&dev->delay) && !test_bit (EVENT_RX_HALT, &dev->flags)) { int temp = dev->rxq.qlen; int qlen = RX_QLEN (dev); if (temp < qlen) { struct urb *urb; int i; // don't refill the queue all at once for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) { urb = usb_alloc_urb (0, GFP_ATOMIC); if (urb != NULL) rx_submit (dev, urb, GFP_ATOMIC); } if (temp != dev->rxq.qlen) netif_dbg(dev, link, dev->net, "rxqlen %d --> %d\n", temp, dev->rxq.qlen); if (dev->rxq.qlen < qlen) tasklet_schedule (&dev->bh); } if (dev->txq.qlen < TX_QLEN (dev)) netif_wake_queue (dev->net); } } /*------------------------------------------------------------------------- * * USB Device Driver support * *-------------------------------------------------------------------------*/ // precondition: never called in_interrupt void usbnet_disconnect (struct usb_interface *intf) { struct usbnet *dev; struct usb_device *xdev; struct net_device *net; dev = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); if (!dev) return; xdev = interface_to_usbdev (intf); netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n", intf->dev.driver->name, xdev->bus->bus_name, xdev->devpath, dev->driver_info->description); net = dev->net; unregister_netdev (net); /* we don't hold rtnl here ... */ flush_scheduled_work (); if (dev->driver_info->unbind) dev->driver_info->unbind (dev, intf); free_netdev(net); usb_put_dev (xdev); } EXPORT_SYMBOL_GPL(usbnet_disconnect); static const struct net_device_ops usbnet_netdev_ops = { .ndo_open = usbnet_open, .ndo_stop = usbnet_stop, .ndo_start_xmit = usbnet_start_xmit, .ndo_tx_timeout = usbnet_tx_timeout, .ndo_change_mtu = usbnet_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; /*-------------------------------------------------------------------------*/ // precondition: never called in_interrupt static struct device_type wlan_type = { .name = "wlan", }; static struct device_type wwan_type = { .name = "wwan", }; int usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) { struct usbnet *dev; struct net_device *net; struct usb_host_interface *interface; struct driver_info *info; struct usb_device *xdev; int status; const char *name; name = udev->dev.driver->name; info = (struct driver_info *) prod->driver_info; if (!info) { dev_dbg (&udev->dev, "blacklisted by %s\n", name); return -ENODEV; } xdev = interface_to_usbdev (udev); interface = udev->cur_altsetting; usb_get_dev (xdev); status = -ENOMEM; // set up our own records net = alloc_etherdev(sizeof(*dev)); if (!net) { dbg ("can't kmalloc dev"); goto out; } dev = netdev_priv(net); dev->udev = xdev; dev->intf = udev; dev->driver_info = info; dev->driver_name = name; dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK); skb_queue_head_init (&dev->rxq); skb_queue_head_init (&dev->txq); skb_queue_head_init (&dev->done); skb_queue_head_init(&dev->rxq_pause); dev->bh.func = usbnet_bh; dev->bh.data = (unsigned long) dev; INIT_WORK (&dev->kevent, kevent); init_usb_anchor(&dev->deferred); dev->delay.function = usbnet_bh; dev->delay.data = (unsigned long) dev; init_timer (&dev->delay); mutex_init (&dev->phy_mutex); dev->net = net; strcpy (net->name, "usb%d"); memcpy (net->dev_addr, node_id, sizeof node_id); /* rx and tx sides can use different message sizes; * bind() should set rx_urb_size in that case. */ dev->hard_mtu = net->mtu + net->hard_header_len; #if 0 // dma_supported() is deeply broken on almost all architectures // possible with some EHCI controllers if (dma_supported (&udev->dev, DMA_BIT_MASK(64))) net->features |= NETIF_F_HIGHDMA; #endif net->netdev_ops = &usbnet_netdev_ops; net->watchdog_timeo = TX_TIMEOUT_JIFFIES; net->ethtool_ops = &usbnet_ethtool_ops; // allow device-specific bind/init procedures // NOTE net->name still not usable ... if (info->bind) { status = info->bind (dev, udev); if (status < 0) goto out1; // heuristic: "usb%d" for links we know are two-host, // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better. if ((dev->driver_info->flags & FLAG_ETHER) != 0 && (net->dev_addr [0] & 0x02) == 0) strcpy (net->name, "eth%d"); /* WLAN devices should always be named "wlan%d" */ if ((dev->driver_info->flags & FLAG_WLAN) != 0) strcpy(net->name, "wlan%d"); /* WWAN devices should always be named "wwan%d" */ if ((dev->driver_info->flags & FLAG_WWAN) != 0) strcpy(net->name, "wwan%d"); /* maybe the remote can't receive an Ethernet MTU */ if (net->mtu > (dev->hard_mtu - net->hard_header_len)) net->mtu = dev->hard_mtu - net->hard_header_len; } else if (!info->in || !info->out) status = usbnet_get_endpoints (dev, udev); else { dev->in = usb_rcvbulkpipe (xdev, info->in); dev->out = usb_sndbulkpipe (xdev, info->out); if (!(info->flags & FLAG_NO_SETINT)) status = usb_set_interface (xdev, interface->desc.bInterfaceNumber, interface->desc.bAlternateSetting); else status = 0; } if (status >= 0 && dev->status) status = init_status (dev, udev); if (status < 0) goto out3; if (!dev->rx_urb_size) dev->rx_urb_size = dev->hard_mtu; dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1); SET_NETDEV_DEV(net, &udev->dev); if ((dev->driver_info->flags & FLAG_WLAN) != 0) SET_NETDEV_DEVTYPE(net, &wlan_type); if ((dev->driver_info->flags & FLAG_WWAN) != 0) SET_NETDEV_DEVTYPE(net, &wwan_type); status = register_netdev (net); if (status) goto out3; netif_info(dev, probe, dev->net, "register '%s' at usb-%s-%s, %s, %pM\n", udev->dev.driver->name, xdev->bus->bus_name, xdev->devpath, dev->driver_info->description, net->dev_addr); // ok, it's ready to go. usb_set_intfdata (udev, dev); netif_device_attach (net); if (dev->driver_info->flags & FLAG_LINK_INTR) netif_carrier_off(net); return 0; out3: if (info->unbind) info->unbind (dev, udev); out1: free_netdev(net); out: usb_put_dev(xdev); return status; } EXPORT_SYMBOL_GPL(usbnet_probe); /*-------------------------------------------------------------------------*/ /* * suspend the whole driver as soon as the first interface is suspended * resume only when the last interface is resumed */ int usbnet_suspend (struct usb_interface *intf, pm_message_t message) { struct usbnet *dev = usb_get_intfdata(intf); if (!dev->suspend_count++) { spin_lock_irq(&dev->txq.lock); /* don't autosuspend while transmitting */ if (dev->txq.qlen && (message.event & PM_EVENT_AUTO)) { spin_unlock_irq(&dev->txq.lock); return -EBUSY; } else { set_bit(EVENT_DEV_ASLEEP, &dev->flags); spin_unlock_irq(&dev->txq.lock); } /* * accelerate emptying of the rx and queues, to avoid * having everything error out. */ netif_device_detach (dev->net); usbnet_terminate_urbs(dev); usb_kill_urb(dev->interrupt); /* * reattach so runtime management can use and * wake the device */ netif_device_attach (dev->net); } return 0; } EXPORT_SYMBOL_GPL(usbnet_suspend); int usbnet_resume (struct usb_interface *intf) { struct usbnet *dev = usb_get_intfdata(intf); struct sk_buff *skb; struct urb *res; int retval; if (!--dev->suspend_count) { spin_lock_irq(&dev->txq.lock); while ((res = usb_get_from_anchor(&dev->deferred))) { printk(KERN_INFO"%s has delayed data\n", __func__); skb = (struct sk_buff *)res->context; retval = usb_submit_urb(res, GFP_ATOMIC); if (retval < 0) { dev_kfree_skb_any(skb); usb_free_urb(res); usb_autopm_put_interface_async(dev->intf); } else { dev->net->trans_start = jiffies; __skb_queue_tail(&dev->txq, skb); } } smp_mb(); clear_bit(EVENT_DEV_ASLEEP, &dev->flags); spin_unlock_irq(&dev->txq.lock); if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_start_queue(dev->net); tasklet_schedule (&dev->bh); } return 0; } EXPORT_SYMBOL_GPL(usbnet_resume); /*-------------------------------------------------------------------------*/ static int __init usbnet_init(void) { /* compiler should optimize this out */ BUILD_BUG_ON (sizeof (((struct sk_buff *)0)->cb) < sizeof (struct skb_data)); random_ether_addr(node_id); return 0; } module_init(usbnet_init); static void __exit usbnet_exit(void) { } module_exit(usbnet_exit); MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("USB network driver framework"); MODULE_LICENSE("GPL");